# SKR3 MCU not possible to read temperature **URL:** \ **Category:** General Discussion\ **Created:** [May 1, 2023, 9:39am UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151 "2023-05-01T09:39:14Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Klausn](https://avatars.discourse-cdn.com/v4/letter/k/f04885/32.png) [@Klausn](https://klipper.discourse.group/u/Klausn)\ **Post date:** [May 1, 2023, 9:39am UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151/1 "2023-05-01T09:39:14Z")
### Basic Information: Printer Model: Sapphire MCU / Printerboard: SKR 3 Hi, I have updated my printer with a Bigtreetech SKR 3 Board. Everything runs fine except the mcu temperature. I get only the message that ADC temperature is not a right name for mcu. This solution didnt work for me: > [@STM32H743XX MCU Temperature](https://klipper.discourse.group/t/stm32h743xx-mcu-temperature/5867): > > I have a question how to add the stm32 temperature sensor in klipper? My SKR 3 has the ARM Cortex-M7 CPU STM32H743VIT6. Did anyone can help? [klippy(3).log](https://klipper.discourse.group/uploads/short-url/a72Lzr3MdvbEMs4axMGXXjwWGIF.log) (27.4 KB) ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [May 1, 2023, 10:58am UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151/2 "2023-05-01T10:58:09Z")
Follow the directions given when you opened the post ---
**Author:** ![Klausn](https://avatars.discourse-cdn.com/v4/letter/k/f04885/32.png) [@Klausn](https://klipper.discourse.group/u/Klausn)\ **Post date:** [May 1, 2023, 3:00pm UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151/3 "2023-05-01T15:00:08Z")
log attached now. Anything missing!? ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [May 1, 2023, 4:32pm UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151/4 "2023-05-01T16:32:21Z")
Did you verify that it really is a STM32H743 and the firmware compiled for it? ---
**Author:** ![Klausn](https://avatars.discourse-cdn.com/v4/letter/k/f04885/32.png) [@Klausn](https://klipper.discourse.group/u/Klausn)\ **Post date:** [May 1, 2023, 6:16pm UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151/5 "2023-05-01T18:16:47Z")
Chip is this: ![IMG_2857](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/4/4a3582e896fa164a420f6743c59492b3f8c331b6.jpeg) I have replaced both files like the other post described. But it didnt work for me. [klippy(4).log](https://klipper.discourse.group/uploads/short-url/sfLVqh30Th3RkdJj1zpNLWn7M11.log) (27.4 KB) ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [May 1, 2023, 6:18pm UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151/6 "2023-05-01T18:18:26Z")
Roll back this change. It is no longer valid. Recompile and reflash ---
**Author:** ![Klausn](https://avatars.discourse-cdn.com/v4/letter/k/f04885/32.png) [@Klausn](https://klipper.discourse.group/u/Klausn)\ **Post date:** [May 1, 2023, 6:34pm UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151/7 "2023-05-01T18:34:59Z")
Solution was recompiling the klipper firmware for the SKR 3 Board ![grafik](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/d/daf18f6654f445d5e6909c78b9cb82025365749d.png) ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [December 6, 2024, 8:01pm UTC](https://klipper.discourse.group/t/skr3-mcu-not-possible-to-read-temperature/8151/8 "2024-12-06T20:01:43Z")
Closed on December 6, 2024, 8:01pm UTC