# Sony pad creality en geeetech a30 t

**URL:** <https://klipper.discourse.group/t/sony-pad-creality-en-geeetech-a30-t/24223>\
**Category:** General Discussion\
**Created:** [July 13, 2025, 5:55pm UTC](https://klipper.discourse.group/t/sony-pad-creality-en-geeetech-a30-t/24223 "2025-07-13T17:55:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FredyGalvis](https://avatars.discourse-cdn.com/v4/letter/f/958977/32.png) [@FredyGalvis](https://klipper.discourse.group/u/FredyGalvis)\
**Post date:** [July 13, 2025, 5:55pm UTC](https://klipper.discourse.group/t/sony-pad-creality-en-geeetech-a30-t/24223/1 "2025-07-13T17:55:36Z")

</div>

### Basic Information:

Printer Model: Geeetech a30t  
 MCU / Printerboard: GTM 32\_103\_V1  
 Host / SBC  
 klippy.log

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue: Un cordial saludo, quiero instalar la Sony Pad Creality a mi geeetech a 30t pero la verdad no encuentro el archivo .cfg si alguien me puede colaborar le agradecería muchisimo.

…

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [July 13, 2025, 6:00pm UTC](https://klipper.discourse.group/t/sony-pad-creality-en-geeetech-a30-t/24223/2 "2025-07-13T18:00:11Z")

</div>

Hello @FredyGalvis !

Please in English.

Do you mean Sony pad or Sonic Pad? For the latter one: [Creality Sonic Pad and Alternatives](https://klipper.discourse.group/t/creality-sonic-pad-and-alternatives/6324/1)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [August 13, 2025, 4:00am UTC](https://klipper.discourse.group/t/sony-pad-creality-en-geeetech-a30-t/24223/3 "2025-08-13T04:00:57Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.