# Sovol SV06 Ace Updated firmware to Mainline Klipper

**URL:** <https://klipper.discourse.group/t/sovol-sv06-ace-updated-firmware-to-mainline-klipper/25656>\
**Category:** General Discussion\
**Created:** [February 18, 2026, 9:08pm UTC](https://klipper.discourse.group/t/sovol-sv06-ace-updated-firmware-to-mainline-klipper/25656 "2026-02-18T21:08:13Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![3dcoded](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/3dcoded/32/20297_2.png) [@3dcoded](https://klipper.discourse.group/u/3dcoded)\
**Post date:** [February 20, 2026, 7:19pm UTC](https://klipper.discourse.group/t/sovol-sv06-ace-updated-firmware-to-mainline-klipper/25656/12 "2026-02-20T19:19:40Z")

</div>

Maybe this could help get the chip working?

> [@Strain Gauge/Load Cell based Endstops](https://klipper.discourse.group/t/strain-gauge-load-cell-based-endstops/2134/595):
>
> I donno about CS1238, but if you meant CS1237 I have it here. It’s not tested yet but you can try it [GitHub - 53Aries/klipper at feature/gd32f425-support](https://github.com/53Aries/klipper/tree/feature/gd32f425-support). Also adds gd32f425 support if that matters to you (Qidi Q2 mainboard mcu)

---

_[View the full topic](https://klipper.discourse.group/t/sovol-sv06-ace-updated-firmware-to-mainline-klipper/25656)._