# Start print error

**URL:** <https://klipper.discourse.group/t/start-print-error/18344>\
**Category:** General Discussion\
**Created:** [August 18, 2024, 3:54pm UTC](https://klipper.discourse.group/t/start-print-error/18344 "2024-08-18T15:54:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brian.wendel6](https://avatars.discourse-cdn.com/v4/letter/b/22d042/32.png) [@Brian.wendel6](https://klipper.discourse.group/u/Brian.wendel6)\
**Post date:** [August 18, 2024, 3:54pm UTC](https://klipper.discourse.group/t/start-print-error/18344/1 "2024-08-18T15:54:54Z")

</div>

### Basic Information:

Printer Model: Artillery Sidewinder X1  
 MCU / Printerboard: Mks gen L  
 Host / SBC Raspberry Pi 5  
 klippy.log  
[klippy (1).log](https://klipper.discourse.group/uploads/short-url/zgkSQcLzIOkgDSIpCwp0ipkfugJ.log) (169.0 KB)

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

I’m using “[Clanks-Klipper-Configs/SideWinder X1 BLTouch.cfg at master · Clank50AE/Clanks-Klipper-Configs · GitHub](https://github.com/Clank50AE/Clanks-Klipper-Configs/blob/master/SideWinder%20X1%20BLTouch.cfg)”  
For my printer.cfg. getting and error  
‘Default \_parameter \_bed\_temp’  
I’m new to klipper. I’ve googled this and looked at other examples. Not sure whats incorrect. Can i get some direction on fixing this. Thank you for your help  
…

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [August 18, 2024, 4:31pm UTC](https://klipper.discourse.group/t/start-print-error/18344/2 "2024-08-18T16:31:38Z")

</div>

You may have a look how to setup a START\_PRINT macro:

> [@Using START\_PRINT and END\_PRINT Macros](https://klipper.discourse.group/t/using-start-print-and-end-print-macros/15459):
>
> Using START\_PRINT and END\_PRINT Macros Rationale The START\_PRINT and END\_PRINT macros are optional but can be used to standardize the printer’s initialization process across different machines. They provide more control over the initialization procedure, which can be particularly useful for printers that require more complex initialization steps. The idea behind them is simple: The slicers offer an abundance of variables, e.g. the extruder / bed temperature of the first layer, Z-offsets, etc T…

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [October 17, 2024, 4:32pm UTC](https://klipper.discourse.group/t/start-print-error/18344/3 "2024-10-17T16:32:24Z")

</div>

Closed on October 17, 2024, 4:32pm UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.