# ! --Stepper direction

**URL:** <https://klipper.discourse.group/t/stepper-direction/6269>\
**Category:** General Discussion\
**Created:** [January 29, 2023, 1:47am UTC](https://klipper.discourse.group/t/stepper-direction/6269 "2023-01-29T01:47:23Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![mykepredko](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/mykepredko/32/2085_2.png) [@mykepredko](https://klipper.discourse.group/u/mykepredko)\
**Post date:** [January 29, 2023, 8:33pm UTC](https://klipper.discourse.group/t/stepper-direction/6269/8 "2023-01-29T20:33:58Z")

</div>

Interesting, there was a discussion on the wiring of Z Axis stepper motors in series and parallel here:

> [@SKR Mini 1.1 with TMC2209 z-axis won't move, No error message](https://klipper.discourse.group/t/skr-mini-1-1-with-tmc2209-z-axis-wont-move-no-error-message/6250/18):
>
> Therefore modern boards are running on 24V. No, that’s not why modern boards are running 24V - they do it to support 200mm/s and faster X/Y movements where the Back EMF can reache 8V or more (with the rule of thumb being that you should provide a power supply with 3x the maximum Back EMF expected). If you are using NEMA 17s, keep under 150mm/s and don’t have any significant binding in your system, you can run at 12V very comfortably. In this situation, 24V runs out of steam at speeds of 500mm…

If you read through what I wrote there, you’ll see that wiring the Z Axis steppers in series might be the right thing to do in this case.

The second thing I’d recommend (maybe do this first) is put some light machine oil on your lead screws and see if that makes things quieter.

---

_[View the full topic](https://klipper.discourse.group/t/stepper-direction/6269)._
