# SV08 Octopus v1.1 anyone

**URL:** <https://klipper.discourse.group/t/sv08-octopus-v1-1-anyone/25757>\
**Category:** General Discussion\
**Created:** [March 16, 2026, 12:31am UTC](https://klipper.discourse.group/t/sv08-octopus-v1-1-anyone/25757 "2026-03-16T00:31:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Casper75](https://avatars.discourse-cdn.com/v4/letter/c/779978/32.png) [@Casper75](https://klipper.discourse.group/u/Casper75)\
**Post date:** [March 16, 2026, 12:31am UTC](https://klipper.discourse.group/t/sv08-octopus-v1-1-anyone/25757/1 "2026-03-16T00:31:39Z")

</div>

### Basic Information:

Printer Model:  
 MCU / Printerboard:  
 Host / SBC  
 klippy.log

_Fill out above information and_ _ **in all cases attach your** _ **`klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

…I have been reading about people bricking there stock Motherboard when trying to flash mainline Klipper . I have a BTT Octopus v1.1 I am not using and I was wondering if anyone has tried to get one installed on a SV08

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [May 15, 2026, 12:32am UTC](https://klipper.discourse.group/t/sv08-octopus-v1-1-anyone/25757/2 "2026-05-15T00:32:23Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.