# Testing w/ Handmade Electronics on an aarch64 board

**URL:** <https://klipper.discourse.group/t/testing-w-handmade-electronics-on-an-aarch64-board/12749>\
**Category:** General Discussion\
**Created:** [January 1, 2024, 6:16am UTC](https://klipper.discourse.group/t/testing-w-handmade-electronics-on-an-aarch64-board/12749 "2024-01-01T06:16:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![silver2row](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/silver2row/32/1462_2.png) [@silver2row](https://klipper.discourse.group/u/silver2row)\
**Post date:** [January 1, 2024, 6:16am UTC](https://klipper.discourse.group/t/testing-w-handmade-electronics-on-an-aarch64-board/12749/1 "2024-01-01T06:16:03Z")

</div>

### Basic Information:

Printer Model: Informative Ideas/i3  
 MCU / Printerboard: TDA4VM/Hand Made/Beaglebone-AI64  
 `klippy.log` No such file so far…

### Describe your issue:

I am trying to learn more in time but…

1. Does the klipper source work for aarch64?
2. Can I install klipper from source to have it ported over to an aarch64 board?
3. Once ported to the aarch64 cores, is it possible to get help w/ firmware on the board after porting?

As you can tell, I am severely new and looking for understandings…

Seth

P.S. Any combination of ideas and testing I can provide will be completed as I progress.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [March 1, 2024, 6:16am UTC](https://klipper.discourse.group/t/testing-w-handmade-electronics-on-an-aarch64-board/12749/2 "2024-03-01T06:16:16Z")

</div>

Closed on March 1, 2024, 6:16am UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.