# Timer too close on ebb36

**URL:** <https://klipper.discourse.group/t/timer-too-close-on-ebb36/19627>\
**Category:** General Discussion\
**Created:** [October 24, 2024, 11:52pm UTC](https://klipper.discourse.group/t/timer-too-close-on-ebb36/19627 "2024-10-24T23:52:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DmitryTverskoy](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@DmitryTverskoy](https://klipper.discourse.group/u/DmitryTverskoy)\
**Post date:** [October 24, 2024, 11:52pm UTC](https://klipper.discourse.group/t/timer-too-close-on-ebb36/19627/1 "2024-10-24T23:52:25Z")

</div>

### Basic Information:

Printer Model: Voron 2.4  
 MCU / Printerboard: Manta M8P v2  
 Host / SBC: BTT CB1  
 klippy.log

Hi! I’m using CANbus to connect to the printer’s print head. Previously, I had a StealthBurner installed with a BTT SB2240 board and everything worked perfectly, 100% stability. Recently, I replaced the print head with a RapidBurner, and now the “timer too close” error constantly appears. The only thing that has changed is the board in the print head and the hotend (in SB there was a Phaetus Dragon HF, in DB a TZ-V6 is installed), and Orbiter2 (in SB Galileo2). The error can appear at any time: when the printer is parking, or when it’s already printing. I don’t know how to find the root cause of this error, and can only rely on the Klipper community. Please help me solve this problem 🙏🏻  
[klippy.log (11).zip](https://klipper.discourse.group/uploads/short-url/3mu6qunrS5mPy6SJJ4exqBBWHpX.zip) (1.1 MB)

---

<div class="post-metadata">

**Author:** ![NAPCAL](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/napcal/32/1794_2.png) [@NAPCAL](https://klipper.discourse.group/u/NAPCAL)\
**Post date:** [October 25, 2024, 1:46am UTC](https://klipper.discourse.group/t/timer-too-close-on-ebb36/19627/2 "2024-10-25T01:46:33Z")

</div>

As @Sineos would post, check out [Timer too close](https://klipper.discourse.group/t/timer-too-close/6634)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [December 24, 2024, 1:46am UTC](https://klipper.discourse.group/t/timer-too-close-on-ebb36/19627/3 "2024-12-24T01:46:51Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.