# Timer too Close on Voron 2.4

**URL:** <https://klipper.discourse.group/t/timer-too-close-on-voron-2-4/10103>\
**Category:** General Discussion\
**Created:** [August 25, 2023, 10:33am UTC](https://klipper.discourse.group/t/timer-too-close-on-voron-2-4/10103 "2023-08-25T10:33:49Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [August 25, 2023, 3:56pm UTC](https://klipper.discourse.group/t/timer-too-close-on-voron-2-4/10103/4 "2023-08-25T15:56:44Z")

</div>

Aside from the standard reasons for such an error listed at [Timer too close](https://klipper.discourse.group/t/timer-too-close/6634), you are using a heavily modified version of Klipper:

```auto
Git version: 'v0.11.0-271-g5f990f93-dirty'
Untracked files: klippy/extras/autotune_tmc.py, klippy/extras/ercf.py, klippy/extras/ercf_encoder.py, klippy/extras/ercf_servo.py, klippy/extras/manual_extruder_stepper.py, klippy/extras/motor_constants.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git

```

Note that such changes, especially in combination, may cause this behavior. Further support can only be provided if the problem also occurs in an unmodified Klipper.

---

_[View the full topic](https://klipper.discourse.group/t/timer-too-close-on-voron-2-4/10103)._