# Timer too close only when print is finished

**URL:** <https://klipper.discourse.group/t/timer-too-close-only-when-print-is-finished/24692>\
**Category:** General Discussion\
**Created:** [August 26, 2025, 6:38pm UTC](https://klipper.discourse.group/t/timer-too-close-only-when-print-is-finished/24692 "2025-08-26T18:38:54Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [August 26, 2025, 7:20pm UTC](https://klipper.discourse.group/t/timer-too-close-only-when-print-is-finished/24692/4 "2025-08-26T19:20:17Z")

</div>

The usual issues are listed here: [Timer too close](https://klipper.discourse.group/t/timer-too-close/6634)

BTW: `HOLD_CURRENT` with the steppers is not recommended.

---

_[View the full topic](https://klipper.discourse.group/t/timer-too-close-only-when-print-is-finished/24692)._