# TMC ’ extruder ’ reports error: DRV.STATUS : 40190010 s2vsa=1 (ShortToSupply\_A!) cs\_actual:25 stealth:1 **URL:** \ **Category:** General Discussion\ **Created:** [March 17, 2023, 6:35pm UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318 "2023-03-17T18:35:53Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![Arvene](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/arvene/32/2218_2.png) [@Arvene](https://klipper.discourse.group/u/Arvene)\ **Post date:** [March 17, 2023, 6:35pm UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/1 "2023-03-17T18:35:53Z")
### Basic Information: Printer Model: Ender 3 V2 (all default hardware including the stepper motors etc) MCU / Printerboard: BTT Manta m8p (TMC 2209) [klippy(2).log](https://klipper.discourse.group/uploads/short-url/1apryUef4FV2qT66aJCY58Z3K7b.log) (7.2 MB) ### Describe your issue: My extruder stepper doesn’t work, the stepper doesn’t seem to engage. the following is the error: TMC ’ extruder ’ reports error: DRV.STATUS : 40190010 s2vsa=1 (ShortToSupply\_A!) cs\_actual:25 stealth:1 … ---
**Author:** ![jakep\_82](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jakep\_82](https://klipper.discourse.group/u/jakep_82)\ **Post date:** [March 17, 2023, 11:36pm UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/2 "2023-03-17T23:36:23Z")
[https://www.klipper3d.org/TMC\_Drivers.html#tmc-reports-error-shorttognd-or-shorttosupply](https://www.klipper3d.org/TMC_Drivers.html#tmc-reports-error-shorttognd-or-shorttosupply) ---
**Author:** ![Arvene](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/arvene/32/2218_2.png) [@Arvene](https://klipper.discourse.group/u/Arvene)\ **Post date:** [March 18, 2023, 12:58am UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/3 "2023-03-18T00:58:44Z")
TMC reports error: `... reset=1(Reset)` OR `CS_ACTUAL=0(Reset?)` OR `SE=0(Reset?)` ([TMC drivers - Klipper documentation](https://www.klipper3d.org/TMC_Drivers.html#tmc-reports-error-reset1reset-or-cs_actual0reset-or-se0reset)) can you please let me know where I can find these errors if they show up? I have already hashed the stealth chop and can hear the skipping sound but it doesn’t extrude or retract. ---
**Author:** ![jakep\_82](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jakep\_82](https://klipper.discourse.group/u/jakep_82)\ **Post date:** [March 18, 2023, 1:13am UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/4 "2023-03-18T01:13:11Z")
My guess is it’s wired incorrectly, or you have a bad connection or wire. I can’t offer any other help. The info at the link is the best information available. ---
**Author:** ![George](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/george/32/3585_2.png) [@George](https://klipper.discourse.group/u/George)\ **Post date:** [March 18, 2023, 3:49am UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/5 "2023-03-18T03:49:44Z")
The Manta M8P pins for motors are wrong in the manual. See [this](https://discord.com/channels/431557959978450984/601577628960423937/1071376074967105536). ---
**Author:** ![Buckeyeprof](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@Buckeyeprof](https://klipper.discourse.group/u/Buckeyeprof)\ **Post date:** [July 2, 2023, 3:32am UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/6 "2023-07-02T03:32:37Z")
I have the same issue but can’t access what you’re linking to… ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [July 2, 2023, 5:01am UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/7 "2023-07-02T05:01:13Z")
Hello @Buckeyeprof ! > [@Buckeyeprof](#): > > I have the same issue but can’t access what you’re linking to… If you can’t access, then it is not the same issue. Please open a new thread with all the required information. ---
**Author:** ![Buckeyeprof](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@Buckeyeprof](https://klipper.discourse.group/u/Buckeyeprof)\ **Post date:** [July 2, 2023, 5:32am UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/8 "2023-07-02T05:32:07Z")
My issue was the same exact issue and I was trying to follow the directions in this thread to fix it. However, when clicking the link in George’s comment that should have lead to a corrected pinout, there’s nothing to view. So, I replied to George to let him know the link doesn’t contain what was promised or I can’t access it. ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [July 2, 2023, 6:22am UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/9 "2023-07-02T06:22:53Z")
See [Manta-M8P/Hardware/BIGTREETECH MANTA M8P V1.0 PinOut.png at master · bigtreetech/Manta-M8P · GitHub](https://github.com/bigtreetech/Manta-M8P/blob/master/Hardware/BIGTREETECH%20MANTA%20M8P%20V1.0%20PinOut.png) Verify your motor connector against this pin-out The errors that @George mentioned have been fixed in the Manta documentation. ---
**Author:** ![Buckeyeprof](https://avatars.discourse-cdn.com/v4/letter/b/bcef8e/32.png) [@Buckeyeprof](https://klipper.discourse.group/u/Buckeyeprof)\ **Post date:** [July 2, 2023, 7:41pm UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/10 "2023-07-02T19:41:37Z")
That was the pinout I had and it’s not very informative. I assumed 2B 2A 1A 1B was the same as B- A- A+ B- on my steppers. But it’s actually B+ B- A- A+. Thankfully the TMC2209s protect themselves from incorrect wiring so I was able to trial-and-error my way to the correct wiring. ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [July 2, 2023, 8:16pm UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/11 "2023-07-02T20:16:15Z")
You will typically find this `2A 2B 1B 1A` or `B1 B2 A1 A2` on the printerboard. The meaning of marking is not uniform, but I dare say: - The first character typically is the coil / phase numbering ( **Very important, since mixing the coils has a good chance to destroy the stepper** ) - The second character is the polarity (less important, since it can be reversed in the software) ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [June 16, 2024, 7:59pm UTC](https://klipper.discourse.group/t/tmc-extruder-reports-error-drv-status-40190010-s2vsa-1-shorttosupply-a-cs-actual-25-stealth-1/7318/12 "2024-06-16T19:59:26Z")