# Trouble since switching to Klipper

**URL:** <https://klipper.discourse.group/t/trouble-since-switching-to-klipper/15237>\
**Category:** General Discussion\
**Created:** [March 26, 2024, 3:27pm UTC](https://klipper.discourse.group/t/trouble-since-switching-to-klipper/15237 "2024-03-26T15:27:48Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [March 27, 2024, 7:05pm UTC](https://klipper.discourse.group/t/trouble-since-switching-to-klipper/15237/7 "2024-03-27T19:05:19Z")

</div>

> [@stolowma](#):
>
> I’m kinda new to Orca

Quality → Precision → Arc Fitting

and

the Klipper docs: [Configuration reference - Klipper documentation](https://www.klipper3d.org/Config_Reference.html?h=arc#gcode_arcs)

If you care about my opinion on arcs: [[FR] Automatic Extrusion - #10 by Sineos](https://klipper.discourse.group/t/fr-automatic-extrusion/14138/10)

---

_[View the full topic](https://klipper.discourse.group/t/trouble-since-switching-to-klipper/15237)._