# Unable to parse max temp

**URL:** <https://klipper.discourse.group/t/unable-to-parse-max-temp/6318>\
**Category:** General Discussion\
**Created:** [January 31, 2023, 1:20am UTC](https://klipper.discourse.group/t/unable-to-parse-max-temp/6318 "2023-01-31T01:20:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![twolfbob](https://avatars.discourse-cdn.com/v4/letter/t/ce73a5/32.png) [@twolfbob](https://klipper.discourse.group/u/twolfbob)\
**Post date:** [January 31, 2023, 1:20am UTC](https://klipper.discourse.group/t/unable-to-parse-max-temp/6318/1 "2023-01-31T01:20:57Z")

</div>

corexy printer  
Bigtreetech octopus 1.1  
[klippy.log](https://klipper.discourse.group/uploads/short-url/r6tDBbLzPL9uSP3FRoKbpN0KLEC.log) (99.7 KB)  
[printer.cfg](https://klipper.discourse.group/uploads/short-url/4GiYe7MrIT15xJq5T2fXo4vIkRu.cfg) (6.1 KB)

Error: Unable to parse option ‘max\_temp’ in section ‘heater\_bed’

I have try retyping and this and check it against a running config on my other printer but it runs a bltouch and not a inductive probe. I have try search klippers documents and have probly mist something . I would a be thinkful for any help. this printer has been fun to build .

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [January 31, 2023, 6:17am UTC](https://klipper.discourse.group/t/unable-to-parse-max-temp/6318/2 "2023-01-31T06:17:24Z")

</div>

![image](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/9/995b76bde11b818e7ec6d2efe6cbfa28453986b3.png)

You have a missing # in the following comment at “Probe”.  
You often can spot such errors easily by comparing your `printer.cfg` to the `klippy.log`:

![image](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/b/befb172807329b1e7500bcfbd1e9d1be2b71ddc6.png)

As the ` Probe` is indented by one blank, Klipper assumes it belongs to the last statement above, which in this case is `max_temp`

---

<div class="post-metadata">

**Author:** ![twolfbob](https://avatars.discourse-cdn.com/v4/letter/t/ce73a5/32.png) [@twolfbob](https://klipper.discourse.group/u/twolfbob)\
**Post date:** [January 31, 2023, 10:29am UTC](https://klipper.discourse.group/t/unable-to-parse-max-temp/6318/3 "2023-01-31T10:29:13Z")

</div>

Thank you Sineos. I have been working thought the errors and have gone blind at what I have been working on. That work great.

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [November 7, 2025, 4:15am UTC](https://klipper.discourse.group/t/unable-to-parse-max-temp/6318/4 "2025-11-07T04:15:11Z")

</div>