# Unable to parse option 'pressure advance' in section 'extruder'

**URL:** <https://klipper.discourse.group/t/unable-to-parse-option-pressure-advance-in-section-extruder/15437>\
**Category:** General Discussion\
**Created:** [April 2, 2024, 12:03pm UTC](https://klipper.discourse.group/t/unable-to-parse-option-pressure-advance-in-section-extruder/15437 "2024-04-02T12:03:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Maxim](https://avatars.discourse-cdn.com/v4/letter/m/ba9def/32.png) [@Maxim](https://klipper.discourse.group/u/Maxim)\
**Post date:** [April 2, 2024, 12:03pm UTC](https://klipper.discourse.group/t/unable-to-parse-option-pressure-advance-in-section-extruder/15437/1 "2024-04-02T12:03:24Z")

</div>

Hello i am new to klipper and after setting up pressure advance i get the error “unable to parse option ‘pressure advance’ in section ‘extruder’”  
This is my klippy log:

[archive.zip](https://klipper.discourse.group/uploads/short-url/gtYPewxpeUWj0Mq5JhOODulzWAZ.zip) (1.2 MB)

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [April 2, 2024, 12:12pm UTC](https://klipper.discourse.group/t/unable-to-parse-option-pressure-advance-in-section-extruder/15437/2 "2024-04-02T12:12:47Z")

</div>

Change the comma into a dot in your PA value.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [May 2, 2024, 10:13pm UTC](https://klipper.discourse.group/t/unable-to-parse-option-pressure-advance-in-section-extruder/15437/3 "2024-05-02T22:13:07Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.