# Unable to read tmc uart 'stepper\_z' register DRV\_STATUS

**URL:** <https://klipper.discourse.group/t/unable-to-read-tmc-uart-stepper-z-register-drv-status/2991>\
**Category:** General Discussion\
**Created:** [May 26, 2022, 10:39am UTC](https://klipper.discourse.group/t/unable-to-read-tmc-uart-stepper-z-register-drv-status/2991 "2022-05-26T10:39:32Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [May 26, 2022, 11:17am UTC](https://klipper.discourse.group/t/unable-to-read-tmc-uart-stepper-z-register-drv-status/2991/2 "2022-05-26T11:17:25Z")

</div>

See [TMC 'extruder' reports error: GSTAT: 00000001 reset=1(reset - #39 by Sineos](https://klipper.discourse.group/t/tmc-extruder-reports-error-gstat-00000001-reset-1-reset/1156/39)

---

_[View the full topic](https://klipper.discourse.group/t/unable-to-read-tmc-uart-stepper-z-register-drv-status/2991)._