# WebCam Not Workinng

**URL:** <https://klipper.discourse.group/t/webcam-not-workinng/15293>\
**Category:** Mainsail\
**Created:** [March 29, 2024, 1:01am UTC](https://klipper.discourse.group/t/webcam-not-workinng/15293 "2024-03-29T01:01:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SaltyDoug](https://avatars.discourse-cdn.com/v4/letter/s/858c86/32.png) [@SaltyDoug](https://klipper.discourse.group/u/SaltyDoug)\
**Post date:** [March 29, 2024, 1:01am UTC](https://klipper.discourse.group/t/webcam-not-workinng/15293/1 "2024-03-29T01:01:17Z")

</div>

### Basic Information:

Printer Model: Makertech Proforge 3.5  
 MCU / Printerboard: BTT SKR2  
 [klippy (2).log.zip](https://klipper.discourse.group/uploads/short-url/6A3o3e1u4byH578UCMPMaDB8Xor.zip) (1.1 MB)  
[crowsnest.log.2024-03-26.zip](https://klipper.discourse.group/uploads/short-url/gOSFo4uXxyfYhKzxIgsUEyyz01R.zip) (93.1 KB)

### Describe your issue:

I upgraded my Klipper system two days ago and my pi camera does not work.  
I settings in Mainsail. No help.  
I checked the connections and ribbon cable.  
I read another report and attempted to re-install Crowsnest. No Help  
“cd crowsnest”  
“sudo make install”

Current System:

**crowsnest**  
v4.1.6-1-ge96cd46

UP-TO-DATE

* * *

**klipper**  
v0.12.0-132-ge37b007f

UP-TO-DATE

* * *

**mainsail**  
v2.10.0

UP-TO-DATE

* * *

**mainsail-config**  
v1.2.1-0-ge57810d5

UP-TO-DATE

* * *

**moonraker**  
v0.8.0-324-ga3e4dac5

UP-TO-DATE

* * *

**sonar**  
v0.1.3-1-geacc498a

UP-TO-DATE

* * *

**System**  
OS-Packages

Thanks for the help.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [May 28, 2024, 1:01am UTC](https://klipper.discourse.group/t/webcam-not-workinng/15293/2 "2024-05-28T01:01:26Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.