# Where can I find klipper.bin **URL:** \ **Category:** General Discussion\ **Created:** [March 20, 2024, 9:58pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104 "2024-03-20T21:58:08Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Printer](https://avatars.discourse-cdn.com/v4/letter/p/9dc877/32.png) [@Printer](https://klipper.discourse.group/u/Printer)\ **Post date:** [March 20, 2024, 9:58pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/1 "2024-03-20T21:58:08Z")
### Basic Information: Printer Model: Ender 3 Pro with CR Touch MCU / Printerboard: BTT SKR Mini e3 v3.0 `klippy.log` [klippy-3.log](https://klipper.discourse.group/uploads/short-url/iN0UXJCFy8QulIgF7R6NPdfVCvo.log) (10.5 KB) _Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: i can not find out how to copy the klipper.bin file from the sd card. If i have the raspberry pi sd card with mainsail in my computer, what path can i follow to get the klipper.bin file extracted so i can put it in the mcu sd card? ---
**Author:** ![Printer](https://avatars.discourse-cdn.com/v4/letter/p/9dc877/32.png) [@Printer](https://klipper.discourse.group/u/Printer)\ **Post date:** [March 21, 2024, 12:44am UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/2 "2024-03-21T00:44:58Z")
Never Mind I Figured it Out ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [March 21, 2024, 6:47am UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/3 "2024-03-21T06:47:29Z")
And where? Other users may to know too. ---
**Author:** ![Printer](https://avatars.discourse-cdn.com/v4/letter/p/9dc877/32.png) [@Printer](https://klipper.discourse.group/u/Printer)\ **Post date:** [March 21, 2024, 12:36pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/4 "2024-03-21T12:36:33Z")
I just renamed the found the file for the main board on github. It was an skr mini e3 v3 ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [March 21, 2024, 3:49pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/5 "2024-03-21T15:49:30Z")
> [@Printer](#): > > I just renamed the found the file But **WHERE** did you find it? ---
**Author:** ![Printer](https://avatars.discourse-cdn.com/v4/letter/p/9dc877/32.png) [@Printer](https://klipper.discourse.group/u/Printer)\ **Post date:** [March 21, 2024, 4:02pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/6 "2024-03-21T16:02:01Z")
> **[GitHub - bigtreetech/BIGTREETECH-SKR-mini-E3: BIGTREETECH SKR-mini-E3...](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3)** > > BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This... firmware/v3.0/klipper/firmware-usb.bin Then I renamed it to firmware.bin plugged it in to mainboard and then Klipper did the rest. ---
**Author:** ![theophile](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/theophile/32/31_2.png) [@theophile](https://klipper.discourse.group/u/theophile)\ **Post date:** [March 22, 2024, 1:53pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/7 "2024-03-22T13:53:19Z")
So you used a 2-year-old binary instead of compiling your own from the current codebase? ---
**Author:** ![Printer](https://avatars.discourse-cdn.com/v4/letter/p/9dc877/32.png) [@Printer](https://klipper.discourse.group/u/Printer)\ **Post date:** [March 23, 2024, 10:38pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/8 "2024-03-23T22:38:37Z")
Yep, sure did. ---
**Author:** ![theophile](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/theophile/32/31_2.png) [@theophile](https://klipper.discourse.group/u/theophile)\ **Post date:** [March 25, 2024, 6:58pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/9 "2024-03-25T18:58:48Z")
I’ll just leave this here so you’ll know what to do when you start experiencing this error: [MCU Protocol error caused by running an older version of the firmware](https://klipper.discourse.group/t/mcu-protocol-error-caused-by-running-an-older-version-of-the-firmware/10371) ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [May 24, 2024, 6:59pm UTC](https://klipper.discourse.group/t/where-can-i-find-klipper-bin/15104/10 "2024-05-24T18:59:04Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.