# Z - offset resets after each prints

**URL:** https://klipper.discourse.group/t/z-offset-resets-after-each-prints/20697
**Category:** General Discussion
**Created:** [December 15, 2024, 4:30pm UTC](https://klipper.discourse.group/t/z-offset-resets-after-each-prints/20697 "2024-12-15T16:30:12Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)
#### Post date: [December 15, 2024, 4:40pm UTC](https://klipper.discourse.group/t/z-offset-resets-after-each-prints/20697/2 "2024-12-15T16:40:11Z")

</div>

Hello @Scienceaddict !

For a genuine Klipper I would say: The offset is stored in the SAVE\_CONFIG block at the end of the config file.

But in this case:

> [@Scienceaddict](#):
>
> Rooted Creality K1C

🤷‍♂️

We do not know what Creality has done to the code.

> [@3D Printers with Preinstalled and Modified Klipper Versions](https://klipper.discourse.group/t/3d-printers-with-preinstalled-and-modified-klipper-versions/20467/1):
>
> Rationale With the growing popularity of Klipper as a firmware option for high-speed, high-quality 3D printing, some Original Equipment Manufacturers (OEMs) have started shipping 3D printers with preinstalled, modified versions of Klipper. These modifications are often made to: Support for the specific hardware configuration. Provide customized features or interfaces. Integrate OEM-specific tools and UI elements tailored to the device. While these preinstalled versions can provide a more seam…

---

_[View the full topic](https://klipper.discourse.group/t/z-offset-resets-after-each-prints/20697)._