Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-271-g5f990f93'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ARMv7 Processor rev 4 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Sep 18 19:15:04 2023 (1695057304.0 183.5)
===== Config file =====
[gcode_macro clean_nozzle]
variable_location_bucket_rear = False
variable_enable_purge = False
variable_purge_len = 10
variable_purge_spd = 150
variable_purge_temp_min = 240
variable_purge_ret = 2
variable_ooze_dwell = 2
variable_brush_top = 22
variable_clearance_z = 5
variable_wipe_qty = 3
variable_prep_spd_xy = 3000
variable_prep_spd_z = 1500
variable_wipe_spd_xy = 5000
variable_brush_width = 52
variable_brush_start = 40
variable_brush_front = 0
variable_brush_depth = 2
variable_bucket_right_width = 40
variable_bucket_left_width = 40
variable_bucket_gap = 22
variable_bucket_start = 0
variable_bucket_pos = 1
gcode = 
	
	{% if "xyz" in printer.toolhead.homed_axes %}
	
	
	SAVE_GCODE_STATE NAME=clean_nozzle
	
	
	G90
	
	
	{% set Ry = printer.configfile.config["stepper_y"]["position_max"]|float %}
	
	
	{% if enable_purge %}
	
	
	SET_GCODE_VARIABLE MACRO=clean_nozzle VARIABLE=bucket_pos VALUE={(range(2) | random)}
	
	
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	
	
	{% if location_bucket_rear %}
	G1 Y{Ry} F{prep_spd_xy}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)} F{prep_spd_xy}
	{% endif %}
	
	
	G1 X{bucket_start + (bucket_left_width / (2 - bucket_pos)) + (bucket_pos * bucket_gap) + (bucket_pos * (bucket_right_width / 2))}
	
	
	
	{% if printer.extruder.temperature >= purge_temp_min %}
	M83
	G1 E{purge_len} F{purge_spd}
	G1 E-{purge_ret} F{purge_spd * 5}
	G4 P{ooze_dwell * 1000}
	G92 E0
	{% endif %}
	
	{% endif %}
	
	
	
	SET_SERVO SERVO=my_servo ANGLE=180
	
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{brush_start + (brush_width * bucket_pos)} F{prep_spd_xy}
	
	
	{% if location_bucket_rear %}
	G1 Y{Ry}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)}
	{% endif %}
	
	
	G1 Z{brush_top} F{prep_spd_z}
	
	
	{% for wipes in range(1, (wipe_qty + 1)) %}
	
	
	g1 X60 Y0 F{wipe_spd_xy}
	g1 X70 Y5 F{wipe_spd_xy}
	g1 X80 Y0 F{wipe_spd_xy}
	g1 x90 Y5 F{wipe_spd_xy}
	g1 X90 Y0 F{wipe_spd_xy}
	g1 X80 Y5 F{wipe_spd_xy}
	g1 X70 Y0 F{wipe_spd_xy}
	g1 X65 Y5 F{wipe_spd_xy}
	g1 X60 Y0 F{wipe_spd_xy}
	{% endfor %}
	
	
	M117 Cleaned!
	G92 E0
	G1 E20 F2000
	G1 E18 F2000
	G1 X50 Y0
	G1 X90 Y0
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{bucket_start + (bucket_left_width / 4)} F{prep_spd_xy}
	
	SET_SERVO SERVO=my_servo ANGLE=0
	
	RESTORE_GCODE_STATE NAME=clean_nozzle
	
	{% else %}
	
	
	{ action_raise_error("Please home your axes!") }
	M117 Please home first!
	
	{% endif %}

[homing_override]
set_position_z = 0
axes = xyz
gcode = 
	g1 Z20
	{% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}
	
	{% if home_all or 'X' in params %}
	SENSORLESS_HOME_X
	{% endif %}
	
	{% if home_all or 'Y' in params %}
	SENSORLESS_HOME_Y
	{% endif %}
	
	{% if home_all or 'Z' in params %}
	G28 Z0
	G1 Z15
	{% endif %}

[gcode_macro SENSORLESS_HOME_X]
gcode = 
	{% set HOME_CUR = 0.700 %}
	{% set driver_config = printer.configfile.settings['tmc2130 stepper_x'] %}
	{% set RUN_CUR = driver_config.run_current %}
	
	SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CUR}
	
	G4 P2000
	
	G28 X0
	
	G90
	G1 X50 F1200
	
	SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CUR}

[gcode_macro SENSORLESS_HOME_Y]
gcode = 
	{% set HOME_CUR = 0.700 %}
	{% set driver_config = printer.configfile.settings['tmc2130 stepper_y'] %}
	{% set RUN_CUR = driver_config.run_current %}
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CUR}
	
	G4 P2000
	
	G28 Y0
	
	G90
	G1 Y50 F1200
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CUR}

[gcode_macro _CLIENT_VARIABLE]
variable_use_custom_pos = False
variable_custom_park_x = 0.0
variable_custom_park_y = 0.0
variable_custom_park_dz = 2.0
variable_retract = 1.0
variable_cancel_retract = 50
variable_speed_retract = 35.0
variable_unretract = 1.0
variable_speed_unretract = 35.0
variable_speed_hop = 15.0
variable_speed_move = 100.0
variable_park_at_cancel = False
variable_park_at_cancel_x = None
variable_park_at_cancel_y = None
variable_use_fw_retract = True
variable_idle_timeout = 0
gcode = 

[gcode_macro LOAD]
gcode = G92
	G1 E500 F9000

[gcode_macro UnLOAD]
gcode = G92
	G1 E-600 F11000

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345]
cs_pin = rpi:None

[resonance_tester]
accel_chip = adxl345
probe_points = 140, 140, 20

[input_shaper]
shaper_freq_x = 112
shaper_type_x = 3hump_ei
shaper_freq_y = 49.6
shaper_type_y = zv

[printer]
max_accel = 3000
kinematics = corexy
max_velocity = 300
max_z_velocity = 5
max_z_accel = 100

[temperature_sensor my_sensor]
sensor_type = BME280
i2c_address = 118
i2c_mcu = mcu
i2c_bus = i2c1a

[servo my_servo]
pin = PD14
maximum_servo_angle = 180
minimum_pulse_width = 0.0004
maximum_pulse_width = 0.0024
initial_angle = 0

[bltouch]
sensor_pin = ^PD9
control_pin = PD15
x_offset = -23
y_offset = 0
z_offset = 2.280

[firmware_retraction]
retract_length = 5
retract_speed = 20
unretract_extra_length = 0
unretract_speed = 10

[bed_mesh]
speed = 120
horizontal_move_z = 7
mesh_min = 10, 10
mesh_max = 265, 285
probe_count = 3, 3

[virtual_sdcard]
path = /home/pi/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0%}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if printer.idle_timeout.state|upper == "IDLE" %}
	{% if last_extruder_temp.restore %} M109 S{last_extruder_temp.temp} {% endif %}
	{% endif %}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Extruder not hot enough'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[mcu]
serial = /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0

[stepper_x]
step_pin = PA0
dir_pin = PC15
enable_pin = !PC11
microsteps = 256
rotation_distance = 40
endstop_pin = tmc2130_stepper_x:virtual_endstop
homing_retract_dist = 0
position_endstop = 0
position_max = 295
homing_speed = 50

[stepper_y]
step_pin = PE5
dir_pin = PE6
enable_pin = !PE3
microsteps = 256
rotation_distance = 40
endstop_pin = tmc2130_stepper_y:virtual_endstop
homing_retract_dist = 0
position_endstop = 0
position_max = 295
homing_speed = 50

[stepper_z]
step_pin = PE1
dir_pin = PE2
enable_pin = !PB7
microsteps = 256
rotation_distance = 4
endstop_pin = probe:z_virtual_endstop
position_max = 200
position_min = -2
homing_retract_dist = 0

[extruder]
step_pin = PB5
dir_pin = !PB6
enable_pin = !PC12
microsteps = 32
rotation_distance = 22.7567
full_steps_per_rotation = 200
gear_ratio = 3:1
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC6
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
min_temp = 0
max_temp = 280
max_extrude_only_distance = 600
min_extrude_temp = 0
control = pid
pid_kp = 19.898
pid_ki = 0.814
pid_kd = 121.626

[heater_bed]
heater_pin = PA1
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
control = pid
pid_kp = 78.68
pid_ki = 13.05
pid_kd = 316.26
min_temp = 0
max_temp = 130

[fan]
pin = PC9

[heater_fan heatbreak_cooling_fan]
pin = PA8

[tmc2130 stepper_x]
cs_pin = PC14
run_current = 0.900
sense_resistor = 0.11
interpolate = False
stealthchop_threshold = 0
spi_software_miso_pin = PA6
spi_software_mosi_pin = PA7
spi_software_sclk_pin = PA5
diag1_pin = ^!PB12
driver_sgt = 5

[tmc2130 stepper_y]
cs_pin = PE4
run_current = 0.900
sense_resistor = 0.11
interpolate = False
stealthchop_threshold = 0
spi_software_miso_pin = PA6
spi_software_mosi_pin = PA7
spi_software_sclk_pin = PA5
diag1_pin = ^!PB15
driver_sgt = 5

[tmc2130 stepper_z]
cs_pin = PE0
run_current = 0.900
sense_resistor = 0.11
interpolate = False
stealthchop_threshold = 0
spi_software_miso_pin = PA6
spi_software_mosi_pin = PA7
spi_software_sclk_pin = PA5

[tmc2130 extruder]
cs_pin = PC13
run_current = 0.700
sense_resistor = 0.011
interpolate = False
stealthchop_threshold = 0
spi_software_miso_pin = PA6
spi_software_mosi_pin = PA7
spi_software_sclk_pin = PA5

[gcode_macro QUERY_BME280]
gcode = 
	{% set sensor = printer["bme280 my_sensor"] %}
	{action_respond_info(
	"Temperature: %.2f C\n"
	"Pressure: %.2f hPa\n"
	"Humidity: %.2f%%" % (
	sensor.temperature,
	sensor.pressure,
	sensor.humidity))}

[bed_mesh default]
version = 1
points = 
	0.148359, 0.035391, 0.067500
	0.008203, -0.083984, -0.016563
	-0.027188, -0.077266, 0.044453
x_count = 3
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 265.0
min_y = 10.0
max_y = 285.0
=======================
BMxx80: Oversampling: Temp 2x Humid 2x Pressure 2x
BMxx80: IIR: 1x
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1964575808: New connection
webhooks client 1964575808: Client info {'program': 'Moonraker', 'version': 'v0.8.0-138-gfe12095'}
mcu 'mcu': got {'count': 294, 'sum': 338553, 'sumsq': 2401944, '#name': 'stats', '#sent_time': 184.622071961, '#receive_time': 184.625207013}
Loaded MCU 'mcu' 124 commands (v0.11.0-271-g5f990f93 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=180000000 MCU=stm32f446xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'rpi': Starting connect
Loaded MCU 'rpi' 118 commands (v0.11.0-271-g5f990f93 / gcc: (Raspbian 10.2.1-6+rpi1) 10.2.1 20210110 binutils: (GNU Binutils for Raspbian) 2.35.2)
MCU 'rpi' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'rpi' printer configuration...
Configured MCU 'rpi' (1024 moves)
bme280: Found Chip BME280 at 0x76
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (33.0, 10.0)    | (10.0, 10.0)
  1   | (160.5, 10.0)   | (137.5, 10.0)
  2   | (288.0, 10.0)   | (265.0, 10.0)
  3   | (288.0, 147.5)  | (265.0, 147.5)
  4   | (160.5, 147.5)  | (137.5, 147.5)
  5   | (33.0, 147.5)   | (10.0, 147.5)
  6   | (33.0, 285.0)   | (10.0, 285.0)
  7   | (160.5, 285.0)  | (137.5, 285.0)
  8   | (288.0, 285.0)  | (265.0, 285.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 187.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3523 bytes_read=6717 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073600 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=850 bytes_read=4991 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997784 adj=49970555 my_sensor: temp=25.1  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.42 cputime=1.972 memavail=611648 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1964575808
webhooks: registering remote method 'reboot_machine' for connection id: 1964575808
webhooks: registering remote method 'pause_job_queue' for connection id: 1964575808
webhooks: registering remote method 'start_job_queue' for connection id: 1964575808
Stats 188.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3579 bytes_read=6882 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073824 rpi: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=856 bytes_read=5021 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998590 adj=49980042 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.42 cputime=2.024 memavail=611648 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 189.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3625 bytes_read=7048 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073696 rpi: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=862 bytes_read=5037 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999349 adj=49980658 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.42 cputime=2.070 memavail=611648 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 190.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000035 mcu_task_stddev=0.000160 bytes_write=3711 bytes_read=7276 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073639 rpi: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=868 bytes_read=5053 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999695 adj=49981600 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.42 cputime=2.102 memavail=611708 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 191.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000035 mcu_task_stddev=0.000160 bytes_write=3757 bytes_read=7427 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073649 rpi: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=874 bytes_read=5069 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000174 adj=49981729 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.38 cputime=2.129 memavail=615312 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 192.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000035 mcu_task_stddev=0.000160 bytes_write=3803 bytes_read=7593 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073738 rpi: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=880 bytes_read=5085 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000250 adj=49982280 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.38 cputime=2.157 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 193.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000035 mcu_task_stddev=0.000160 bytes_write=3859 bytes_read=7773 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073656 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=886 bytes_read=5114 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000290 adj=49981778 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.38 cputime=2.186 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 194.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000035 mcu_task_stddev=0.000160 bytes_write=3935 bytes_read=7948 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073681 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=892 bytes_read=5130 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000203 adj=49981461 my_sensor: temp=25.1  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.38 cputime=2.215 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 195.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000076 mcu_task_stddev=0.000206 bytes_write=4001 bytes_read=8166 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073671 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=898 bytes_read=5146 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000134 adj=49980760 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.38 cputime=2.247 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 196.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000076 mcu_task_stddev=0.000206 bytes_write=4057 bytes_read=8346 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073677 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=904 bytes_read=5162 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000130 adj=49980281 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.43 cputime=2.276 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 197.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000076 mcu_task_stddev=0.000206 bytes_write=4103 bytes_read=8497 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073652 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=910 bytes_read=5178 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000148 adj=49980111 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.43 cputime=2.303 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 198.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000076 mcu_task_stddev=0.000206 bytes_write=4159 bytes_read=8677 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073662 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=916 bytes_read=5207 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000140 adj=49980095 my_sensor: temp=25.1  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.43 cputime=2.333 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 199.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000076 mcu_task_stddev=0.000206 bytes_write=4245 bytes_read=8888 bytes_retransmit=9 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073647 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=922 bytes_read=5223 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000118 adj=49979952 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.43 cputime=2.364 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 200.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000077 mcu_task_stddev=0.000207 bytes_write=4291 bytes_read=9056 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073699 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=928 bytes_read=5239 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000113 adj=49979811 my_sensor: temp=25.1  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.43 cputime=2.392 memavail=615328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 201.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000077 mcu_task_stddev=0.000207 bytes_write=4337 bytes_read=9222 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073651 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=934 bytes_read=5255 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000096 adj=49979687 my_sensor: temp=25.1  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.40 cputime=2.419 memavail=614344 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 202.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000077 mcu_task_stddev=0.000207 bytes_write=4383 bytes_read=9384 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073649 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=940 bytes_read=5271 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000085 adj=49979662 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.40 cputime=2.447 memavail=614344 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 203.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000077 mcu_task_stddev=0.000207 bytes_write=4469 bytes_read=9573 bytes_retransmit=9 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073637 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=946 bytes_read=5300 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000092 adj=49979607 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.40 cputime=2.477 memavail=614344 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 204.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000077 mcu_task_stddev=0.000207 bytes_write=4515 bytes_read=9739 bytes_retransmit=9 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073631 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=952 bytes_read=5316 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000100 adj=49979670 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.40 cputime=2.505 memavail=614344 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 205.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000084 mcu_task_stddev=0.000219 bytes_write=4561 bytes_read=9922 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073637 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=958 bytes_read=5332 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000090 adj=49979713 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.40 cputime=2.532 memavail=614344 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 206.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000084 mcu_task_stddev=0.000219 bytes_write=4617 bytes_read=10087 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073651 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=964 bytes_read=5348 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000087 adj=49979635 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.37 cputime=2.560 memavail=614344 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 207.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000084 mcu_task_stddev=0.000219 bytes_write=4713 bytes_read=10291 bytes_retransmit=9 bytes_invalid=0 send_seq=453 receive_seq=452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073658 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=976 bytes_read=5380 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000081 adj=49979600 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.37 cputime=2.591 memavail=614360 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 208.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000084 mcu_task_stddev=0.000219 bytes_write=4769 bytes_read=10492 bytes_retransmit=9 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073675 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=982 bytes_read=5409 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000073 adj=49979562 my_sensor: temp=25.1  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.37 cputime=2.622 memavail=614360 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 209.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000084 mcu_task_stddev=0.000219 bytes_write=4825 bytes_read=10657 bytes_retransmit=9 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073675 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=988 bytes_read=5425 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000069 adj=49979503 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.37 cputime=2.652 memavail=614360 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 210.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000081 mcu_task_stddev=0.000208 bytes_write=4881 bytes_read=10854 bytes_retransmit=9 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073669 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=994 bytes_read=5441 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000065 adj=49979506 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.37 cputime=2.681 memavail=614360 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 211.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000081 mcu_task_stddev=0.000208 bytes_write=4937 bytes_read=11034 bytes_retransmit=9 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073663 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1000 bytes_read=5457 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000073 adj=49979514 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.34 cputime=2.712 memavail=612852 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 212.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000081 mcu_task_stddev=0.000208 bytes_write=5033 bytes_read=11244 bytes_retransmit=9 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073660 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1006 bytes_read=5473 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000067 adj=49979606 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.34 cputime=2.745 memavail=612852 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 213.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000081 mcu_task_stddev=0.000208 bytes_write=5089 bytes_read=11424 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073665 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1012 bytes_read=5502 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000062 adj=49979572 my_sensor: temp=25.1  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.34 cputime=2.776 memavail=612856 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 214.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000081 mcu_task_stddev=0.000208 bytes_write=5145 bytes_read=11604 bytes_retransmit=9 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180073705 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1018 bytes_read=5518 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000054 adj=49979540 my_sensor: temp=25.1  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.34 cputime=2.806 memavail=612856 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000