===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-200-g7511151a'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
webhooks client 281473631936416: {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
=============== Log rollover at Fri May 19 00:49:10 2023 ===============
Stats 89.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=9276 bytes_read=18659 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.6 mcu_temp: temp=21.9  sysload=1.69 cputime=7.622 memavail=719052 print_time=91.654 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 90.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=9864 bytes_read=19252 bytes_retransmit=9 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=22.1  sysload=1.56 cputime=7.706 memavail=719328 print_time=92.686 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000000
Stats 91.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=10945 bytes_read=20276 bytes_retransmit=9 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997028 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.8 mcu_temp: temp=22.0  sysload=1.56 cputime=7.881 memavail=716760 print_time=94.479 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 92.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=11126 bytes_read=20625 bytes_retransmit=9 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997029 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=37.4 mcu_temp: temp=21.9  sysload=1.56 cputime=7.956 memavail=714712 print_time=94.679 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 93.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=11568 bytes_read=21186 bytes_retransmit=9 bytes_invalid=0 send_seq=736 receive_seq=736 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=38.3 mcu_temp: temp=21.8  sysload=1.56 cputime=8.043 memavail=717500 print_time=95.679 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 94.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12027 bytes_read=21822 bytes_retransmit=9 bytes_invalid=0 send_seq=770 receive_seq=770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997034 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=37.6 mcu_temp: temp=22.0  sysload=1.56 cputime=8.145 memavail=720980 print_time=96.722 buffer_time=0.228 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 95.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12117 bytes_read=22137 bytes_retransmit=9 bytes_invalid=0 send_seq=777 receive_seq=777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997031 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.6 mcu_temp: temp=21.9  sysload=1.43 cputime=8.197 memavail=720572 print_time=96.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 96.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12240 bytes_read=22433 bytes_retransmit=9 bytes_invalid=0 send_seq=786 receive_seq=786 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.5 mcu_temp: temp=22.1  sysload=1.43 cputime=8.249 memavail=721076 print_time=96.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 97.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12330 bytes_read=22734 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997025 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.7 mcu_temp: temp=21.9  sysload=1.43 cputime=8.298 memavail=720836 print_time=96.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 98.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000018 bytes_write=12420 bytes_read=23064 bytes_retransmit=9 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997022 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.6 mcu_temp: temp=21.9  sysload=1.43 cputime=8.351 memavail=721312 print_time=96.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 99.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000018 bytes_write=12510 bytes_read=23350 bytes_retransmit=9 bytes_invalid=0 send_seq=807 receive_seq=807 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.0  sysload=1.43 cputime=8.408 memavail=717024 print_time=96.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 100.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000018 bytes_write=12600 bytes_read=23641 bytes_retransmit=9 bytes_invalid=0 send_seq=814 receive_seq=814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.6 mcu_temp: temp=21.9  sysload=1.40 cputime=8.469 memavail=716280 print_time=96.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 101.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000018 bytes_write=12970 bytes_read=23987 bytes_retransmit=9 bytes_invalid=0 send_seq=829 receive_seq=829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167997017 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=37.7 mcu_temp: temp=21.8  sysload=1.40 cputime=8.547 memavail=718580 print_time=108.740 buffer_time=5.239 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 102.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000018 bytes_write=13100 bytes_read=24283 bytes_retransmit=9 bytes_invalid=0 send_seq=838 receive_seq=838 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997016 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=37.6 mcu_temp: temp=22.1  sysload=1.40 cputime=8.610 memavail=716664 print_time=108.740 buffer_time=4.238 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 103.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=13190 bytes_read=24599 bytes_retransmit=9 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=37.3 mcu_temp: temp=21.9  sysload=1.40 cputime=8.667 memavail=715716 print_time=108.740 buffer_time=3.237 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 104.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=13280 bytes_read=24914 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997036 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.7 mcu_temp: temp=22.1  sysload=1.40 cputime=8.719 memavail=715916 print_time=108.740 buffer_time=2.237 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 105.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=13412 bytes_read=25220 bytes_retransmit=9 bytes_invalid=0 send_seq=863 receive_seq=863 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997032 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.3 mcu_temp: temp=22.1  sysload=1.29 cputime=8.774 memavail=716408 print_time=108.740 buffer_time=1.236 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 106.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=13689 bytes_read=25541 bytes_retransmit=9 bytes_invalid=0 send_seq=874 receive_seq=874 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997041 heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.3  sysload=1.29 cputime=8.828 memavail=716408 print_time=109.775 buffer_time=1.270 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 107.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=13800 bytes_read=25866 bytes_retransmit=9 bytes_invalid=0 send_seq=883 receive_seq=883 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997036 heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.0 mcu_temp: temp=22.2  sysload=1.29 cputime=8.883 memavail=716424 print_time=109.775 buffer_time=0.270 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 108.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14033 bytes_read=26187 bytes_retransmit=9 bytes_invalid=0 send_seq=894 receive_seq=894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167997035 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.2  sysload=1.29 cputime=8.941 memavail=716424 print_time=111.757 buffer_time=1.250 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 109.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14182 bytes_read=26498 bytes_retransmit=9 bytes_invalid=0 send_seq=903 receive_seq=903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997030 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.2  sysload=1.29 cputime=8.995 memavail=716672 print_time=111.757 buffer_time=0.250 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 110.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14272 bytes_read=26813 bytes_retransmit=9 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.8 mcu_temp: temp=22.2  sysload=1.18 cputime=9.045 memavail=716424 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 111.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14395 bytes_read=27109 bytes_retransmit=9 bytes_invalid=0 send_seq=919 receive_seq=919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.3 mcu_temp: temp=22.1  sysload=1.18 cputime=9.094 memavail=716632 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 112.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14485 bytes_read=27424 bytes_retransmit=9 bytes_invalid=0 send_seq=926 receive_seq=926 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997022 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.1  sysload=1.18 cputime=9.144 memavail=716648 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 113.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=14575 bytes_read=27740 bytes_retransmit=9 bytes_invalid=0 send_seq=933 receive_seq=933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997019 heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.3  sysload=1.18 cputime=9.192 memavail=716700 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 114.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=14686 bytes_read=28036 bytes_retransmit=9 bytes_invalid=0 send_seq=942 receive_seq=942 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997019 heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.7 mcu_temp: temp=22.2  sysload=1.18 cputime=9.238 memavail=716456 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 115.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=14797 bytes_read=28361 bytes_retransmit=9 bytes_invalid=0 send_seq=951 receive_seq=951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.0 mcu_temp: temp=22.3  sysload=1.09 cputime=9.288 memavail=716764 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 116.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=14887 bytes_read=28662 bytes_retransmit=9 bytes_invalid=0 send_seq=958 receive_seq=958 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.3  sysload=1.09 cputime=9.339 memavail=716764 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.6 pwm=0.000
Stats 117.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=14977 bytes_read=28948 bytes_retransmit=9 bytes_invalid=0 send_seq=965 receive_seq=965 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.1  sysload=1.09 cputime=9.387 memavail=716524 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 118.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=15067 bytes_read=29278 bytes_retransmit=9 bytes_invalid=0 send_seq=972 receive_seq=972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.2 mcu_temp: temp=22.2  sysload=1.09 cputime=9.438 memavail=717028 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.3 pwm=0.000
Stats 119.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=15157 bytes_read=29579 bytes_retransmit=9 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.2 mcu_temp: temp=22.3  sysload=1.09 cputime=9.486 memavail=716776 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 120.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=15247 bytes_read=29865 bytes_retransmit=9 bytes_invalid=0 send_seq=986 receive_seq=986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.3  sysload=1.00 cputime=9.534 memavail=717036 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 121.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=15379 bytes_read=30200 bytes_retransmit=9 bytes_invalid=0 send_seq=997 receive_seq=997 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.3  sysload=1.00 cputime=9.584 memavail=717036 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 122.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=15496 bytes_read=30527 bytes_retransmit=9 bytes_invalid=0 send_seq=1007 receive_seq=1007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.3  sysload=1.00 cputime=9.634 memavail=716784 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 123.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15586 bytes_read=30828 bytes_retransmit=9 bytes_invalid=0 send_seq=1014 receive_seq=1014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.6 mcu_temp: temp=22.3  sysload=1.00 cputime=9.682 memavail=716792 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 124.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15718 bytes_read=31163 bytes_retransmit=9 bytes_invalid=0 send_seq=1025 receive_seq=1025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.3 mcu_temp: temp=22.3  sysload=1.00 cputime=9.732 memavail=717548 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 125.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15850 bytes_read=31479 bytes_retransmit=9 bytes_invalid=0 send_seq=1036 receive_seq=1036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.6 mcu_temp: temp=22.5  sysload=0.92 cputime=9.784 memavail=717620 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 126.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15961 bytes_read=31765 bytes_retransmit=9 bytes_invalid=0 send_seq=1045 receive_seq=1045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.7 mcu_temp: temp=22.3  sysload=0.92 cputime=9.833 memavail=717620 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 127.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16072 bytes_read=32087 bytes_retransmit=9 bytes_invalid=0 send_seq=1054 receive_seq=1054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.2 mcu_temp: temp=22.4  sysload=0.92 cputime=9.885 memavail=717344 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 128.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=16183 bytes_read=32413 bytes_retransmit=9 bytes_invalid=0 send_seq=1063 receive_seq=1063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.6 mcu_temp: temp=22.4  sysload=0.92 cputime=9.935 memavail=717408 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 129.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=16273 bytes_read=32699 bytes_retransmit=9 bytes_invalid=0 send_seq=1070 receive_seq=1070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.5 mcu_temp: temp=22.6  sysload=0.92 cputime=9.983 memavail=717408 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 130.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=16363 bytes_read=33014 bytes_retransmit=9 bytes_invalid=0 send_seq=1077 receive_seq=1077 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.3  sysload=0.85 cputime=10.036 memavail=717416 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 131.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=16453 bytes_read=33315 bytes_retransmit=9 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.1 mcu_temp: temp=22.7  sysload=0.85 cputime=10.084 memavail=716916 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 132.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=16543 bytes_read=33601 bytes_retransmit=9 bytes_invalid=0 send_seq=1091 receive_seq=1091 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=22.4  sysload=0.85 cputime=10.132 memavail=716668 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 133.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16633 bytes_read=33931 bytes_retransmit=9 bytes_invalid=0 send_seq=1098 receive_seq=1098 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.6 mcu_temp: temp=22.4  sysload=0.85 cputime=10.180 memavail=716668 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 134.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16723 bytes_read=34232 bytes_retransmit=9 bytes_invalid=0 send_seq=1105 receive_seq=1105 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.3 mcu_temp: temp=22.7  sysload=0.85 cputime=10.230 memavail=717052 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 135.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16813 bytes_read=34518 bytes_retransmit=9 bytes_invalid=0 send_seq=1112 receive_seq=1112 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997009 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.2 mcu_temp: temp=22.7  sysload=0.78 cputime=10.283 memavail=717852 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 136.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16903 bytes_read=34833 bytes_retransmit=9 bytes_invalid=0 send_seq=1119 receive_seq=1119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.5 mcu_temp: temp=22.6  sysload=0.78 cputime=10.333 memavail=717800 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 137.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16993 bytes_read=35134 bytes_retransmit=9 bytes_invalid=0 send_seq=1126 receive_seq=1126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.7 mcu_temp: temp=22.7  sysload=0.78 cputime=10.382 memavail=717388 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 138.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17083 bytes_read=35435 bytes_retransmit=9 bytes_invalid=0 send_seq=1133 receive_seq=1133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.5 mcu_temp: temp=22.7  sysload=0.78 cputime=10.431 memavail=717136 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 139.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17173 bytes_read=35750 bytes_retransmit=9 bytes_invalid=0 send_seq=1140 receive_seq=1140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.5 mcu_temp: temp=22.7  sysload=0.78 cputime=10.480 memavail=717384 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 140.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17263 bytes_read=36051 bytes_retransmit=9 bytes_invalid=0 send_seq=1147 receive_seq=1147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=22.6  sysload=0.88 cputime=10.529 memavail=717384 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 141.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17353 bytes_read=36337 bytes_retransmit=9 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.8 mcu_temp: temp=22.5  sysload=0.88 cputime=10.579 memavail=717656 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 142.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17443 bytes_read=36652 bytes_retransmit=9 bytes_invalid=0 send_seq=1161 receive_seq=1161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997009 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=22.7  sysload=0.88 cputime=10.629 memavail=717168 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 143.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17533 bytes_read=36968 bytes_retransmit=9 bytes_invalid=0 send_seq=1168 receive_seq=1168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.7 mcu_temp: temp=22.7  sysload=0.88 cputime=10.684 memavail=717960 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 144.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17623 bytes_read=37254 bytes_retransmit=9 bytes_invalid=0 send_seq=1175 receive_seq=1175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=22.7  sysload=0.88 cputime=10.737 memavail=717960 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 145.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17713 bytes_read=37569 bytes_retransmit=9 bytes_invalid=0 send_seq=1182 receive_seq=1182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.3 mcu_temp: temp=22.7  sysload=1.05 cputime=10.791 memavail=718748 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 146.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17803 bytes_read=37870 bytes_retransmit=9 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.4 mcu_temp: temp=22.8  sysload=1.05 cputime=10.843 memavail=718748 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 147.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17893 bytes_read=38156 bytes_retransmit=9 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997019 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.3 mcu_temp: temp=22.9  sysload=1.05 cputime=10.897 memavail=718264 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 148.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17983 bytes_read=38486 bytes_retransmit=9 bytes_invalid=0 send_seq=1203 receive_seq=1203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=23.0  sysload=1.05 cputime=10.950 memavail=719028 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 149.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18073 bytes_read=38787 bytes_retransmit=9 bytes_invalid=0 send_seq=1210 receive_seq=1210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.1 mcu_temp: temp=22.9  sysload=1.05 cputime=11.002 memavail=718776 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 150.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18163 bytes_read=39073 bytes_retransmit=9 bytes_invalid=0 send_seq=1217 receive_seq=1217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.0 mcu_temp: temp=22.9  sysload=1.20 cputime=11.054 memavail=718532 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 151.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18253 bytes_read=39379 bytes_retransmit=9 bytes_invalid=0 send_seq=1224 receive_seq=1224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.3 mcu_temp: temp=22.8  sysload=1.20 cputime=11.107 memavail=718532 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 152.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18343 bytes_read=39672 bytes_retransmit=9 bytes_invalid=0 send_seq=1231 receive_seq=1231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.7 mcu_temp: temp=23.0  sysload=1.20 cputime=11.159 memavail=718292 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 153.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=18475 bytes_read=39993 bytes_retransmit=9 bytes_invalid=0 send_seq=1242 receive_seq=1242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997026 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=36.1 mcu_temp: temp=23.0  sysload=1.20 cputime=11.213 memavail=718292 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 154.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=18565 bytes_read=40308 bytes_retransmit=9 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=22.9  sysload=1.20 cputime=11.265 memavail=718796 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 155.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=18655 bytes_read=40609 bytes_retransmit=9 bytes_invalid=0 send_seq=1256 receive_seq=1256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997028 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.7 mcu_temp: temp=23.0  sysload=1.19 cputime=11.318 memavail=718352 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 156.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=18745 bytes_read=40895 bytes_retransmit=9 bytes_invalid=0 send_seq=1263 receive_seq=1263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997028 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.0 mcu_temp: temp=23.0  sysload=1.19 cputime=11.370 memavail=718360 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 157.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=18835 bytes_read=41210 bytes_retransmit=9 bytes_invalid=0 send_seq=1270 receive_seq=1270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=36.0 mcu_temp: temp=22.9  sysload=1.19 cputime=11.428 memavail=718368 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 158.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18925 bytes_read=41526 bytes_retransmit=9 bytes_invalid=0 send_seq=1277 receive_seq=1277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997026 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.4 mcu_temp: temp=22.9  sysload=1.19 cputime=11.482 memavail=718368 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 159.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19015 bytes_read=41812 bytes_retransmit=9 bytes_invalid=0 send_seq=1284 receive_seq=1284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.8 mcu_temp: temp=22.9  sysload=1.19 cputime=11.534 memavail=718372 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 160.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19105 bytes_read=42127 bytes_retransmit=9 bytes_invalid=0 send_seq=1291 receive_seq=1291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997029 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.6 mcu_temp: temp=23.1  sysload=1.09 cputime=11.587 memavail=718120 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 161.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19195 bytes_read=42428 bytes_retransmit=9 bytes_invalid=0 send_seq=1298 receive_seq=1298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997035 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=23.1  sysload=1.09 cputime=11.641 memavail=719188 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 162.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19285 bytes_read=42714 bytes_retransmit=9 bytes_invalid=0 send_seq=1305 receive_seq=1305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997035 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.6 mcu_temp: temp=22.9  sysload=1.09 cputime=11.694 memavail=718712 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 163.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19375 bytes_read=43059 bytes_retransmit=9 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997034 heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=23.1  sysload=1.09 cputime=11.748 memavail=719220 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 164.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19465 bytes_read=43345 bytes_retransmit=9 bytes_invalid=0 send_seq=1319 receive_seq=1319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997040 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.8 mcu_temp: temp=23.1  sysload=1.09 cputime=11.800 memavail=719472 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 165.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19555 bytes_read=43631 bytes_retransmit=9 bytes_invalid=0 send_seq=1326 receive_seq=1326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997040 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.9 mcu_temp: temp=23.1  sysload=1.00 cputime=11.852 memavail=720004 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 166.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19645 bytes_read=43961 bytes_retransmit=9 bytes_invalid=0 send_seq=1333 receive_seq=1333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997040 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.8 mcu_temp: temp=23.1  sysload=1.00 cputime=11.909 memavail=719512 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.5 pwm=0.000
Stats 167.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19756 bytes_read=44257 bytes_retransmit=9 bytes_invalid=0 send_seq=1342 receive_seq=1342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997039 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.8 mcu_temp: temp=23.1  sysload=1.00 cputime=11.963 memavail=719100 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 168.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=19867 bytes_read=44568 bytes_retransmit=9 bytes_invalid=0 send_seq=1351 receive_seq=1351 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997048 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=23.1  sysload=1.00 cputime=12.016 memavail=719884 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Stats 169.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=19957 bytes_read=44898 bytes_retransmit=9 bytes_invalid=0 send_seq=1358 receive_seq=1358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997048 heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.1 mcu_temp: temp=23.0  sysload=1.00 cputime=12.071 memavail=719992 print_time=111.757 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.4 pwm=0.000
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-200-g7511151a'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Mon May 15 16:17:10 2023 (1684167430.6 18.0)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281473053330592: New connection
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
webhooks client 281473053330592: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 24.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5238 bytes_read=6116 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=268 retransmit_seq=2 srtt=0.003 rttvar=0.002 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=168000616 heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=30.9 mcu_temp: temp=0.0  sysload=1.77 cputime=5.956 memavail=744516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473053330592
webhooks: registering remote method 'reboot_machine' for connection id: 281473053330592
webhooks: registering remote method 'pause_job_queue' for connection id: 281473053330592
webhooks: registering remote method 'start_job_queue' for connection id: 281473053330592
Stats 25.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5312 bytes_read=6201 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=272 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=167995846 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=28.9 mcu_temp: temp=17.3  sysload=1.95 cputime=6.039 memavail=742488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 26.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5341 bytes_read=6388 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995806 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=28.8 mcu_temp: temp=17.3  sysload=1.95 cputime=6.084 memavail=739140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 27.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5347 bytes_read=6551 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995842 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=28.5 mcu_temp: temp=17.5  sysload=1.95 cputime=6.120 memavail=736928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 28.2: gcodein=0  mcu: mcu_awake=0.049 mcu_task_avg=0.000057 mcu_task_stddev=0.000193 bytes_write=5353 bytes_read=6716 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995794 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=28.0 mcu_temp: temp=17.5  sysload=1.95 cputime=6.171 memavail=732456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 29.2: gcodein=0  mcu: mcu_awake=0.049 mcu_task_avg=0.000057 mcu_task_stddev=0.000193 bytes_write=5359 bytes_read=6893 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995941 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=28.0 mcu_temp: temp=17.5  sysload=1.95 cputime=6.206 memavail=728544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 30.2: gcodein=0  mcu: mcu_awake=0.049 mcu_task_avg=0.000057 mcu_task_stddev=0.000193 bytes_write=5365 bytes_read=7056 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996177 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=27.7 mcu_temp: temp=17.7  sysload=2.28 cputime=6.248 memavail=723268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 31.2: gcodein=0  mcu: mcu_awake=0.049 mcu_task_avg=0.000057 mcu_task_stddev=0.000193 bytes_write=5371 bytes_read=7204 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996410 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=28.5 mcu_temp: temp=17.6  sysload=2.28 cputime=6.291 memavail=720488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 32.2: gcodein=0  mcu: mcu_awake=0.049 mcu_task_avg=0.000057 mcu_task_stddev=0.000193 bytes_write=5377 bytes_read=7381 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996417 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.2 mcu_temp: temp=17.6  sysload=2.28 cputime=6.335 memavail=721276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 33.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5383 bytes_read=7558 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996471 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=29.2 mcu_temp: temp=17.9  sysload=2.28 cputime=6.375 memavail=722340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 34.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5389 bytes_read=7706 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996473 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.6 mcu_temp: temp=17.8  sysload=2.28 cputime=6.408 memavail=722088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 35.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5395 bytes_read=7883 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996502 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=27.4 mcu_temp: temp=17.9  sysload=2.09 cputime=6.443 memavail=722088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 36.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5401 bytes_read=8046 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996503 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.2 mcu_temp: temp=18.0  sysload=2.09 cputime=6.478 memavail=722328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 37.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5407 bytes_read=8194 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996536 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.1 mcu_temp: temp=18.1  sysload=2.09 cputime=6.512 memavail=722396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 38.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5413 bytes_read=8385 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996532 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.4 mcu_temp: temp=18.1  sysload=2.09 cputime=6.548 memavail=717620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 39.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5419 bytes_read=8548 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=28.7 mcu_temp: temp=18.0  sysload=2.09 cputime=6.590 memavail=720300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 40.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5425 bytes_read=8696 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996651 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.6 mcu_temp: temp=17.9  sysload=2.09 cputime=6.633 memavail=722784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 41.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5431 bytes_read=8873 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996668 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=28.9 mcu_temp: temp=17.9  sysload=2.09 cputime=6.675 memavail=722144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 42.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5437 bytes_read=9036 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996668 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=29.0 mcu_temp: temp=18.1  sysload=2.09 cputime=6.714 memavail=723648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 43.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5443 bytes_read=9198 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996781 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.2 mcu_temp: temp=18.1  sysload=2.09 cputime=6.748 memavail=723664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 44.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5449 bytes_read=9390 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996771 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.1 mcu_temp: temp=18.3  sysload=2.09 cputime=6.783 memavail=723916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 45.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5455 bytes_read=9538 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996766 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=26.8 mcu_temp: temp=18.2  sysload=1.92 cputime=6.816 memavail=723920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 46.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5461 bytes_read=9686 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996756 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.1 mcu_temp: temp=18.1  sysload=1.92 cputime=6.853 memavail=724652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 47.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5467 bytes_read=9878 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996752 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.4 mcu_temp: temp=18.3  sysload=1.92 cputime=6.891 memavail=723192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 48.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5473 bytes_read=10040 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996770 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=28.8 mcu_temp: temp=18.3  sysload=1.92 cputime=6.932 memavail=721248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 49.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5479 bytes_read=10179 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996776 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.4 mcu_temp: temp=18.3  sysload=1.92 cputime=6.972 memavail=721132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 50.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5485 bytes_read=10364 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996773 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.2 mcu_temp: temp=18.2  sysload=1.84 cputime=7.015 memavail=722148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 51.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5491 bytes_read=10512 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996768 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=29.0 mcu_temp: temp=18.4  sysload=1.84 cputime=7.049 memavail=722148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 52.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5497 bytes_read=10660 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996764 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=27.6 mcu_temp: temp=18.2  sysload=1.84 cputime=7.084 memavail=723224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 53.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5503 bytes_read=10866 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996760 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.4 mcu_temp: temp=18.3  sysload=1.84 cputime=7.119 memavail=722984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 54.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5509 bytes_read=11014 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996768 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.5 mcu_temp: temp=18.4  sysload=1.84 cputime=7.153 memavail=722708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 55.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5515 bytes_read=11162 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996772 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=27.3 mcu_temp: temp=18.5  sysload=1.70 cputime=7.187 memavail=723012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 56.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5521 bytes_read=11354 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996773 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=27.8 mcu_temp: temp=18.5  sysload=1.70 cputime=7.227 memavail=720004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 57.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5533 bytes_read=11518 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996827 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=29.5 mcu_temp: temp=18.6  sysload=1.70 cputime=7.273 memavail=719652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Must home axis first: 0.000 0.000 25.000 [0.000]
Must home axis first: 0.000 0.000 25.000 [0.000]
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
Stats 94.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6547 bytes_read=18207 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.7 mcu_temp: temp=19.5  sysload=1.44 cputime=8.750 memavail=720992 print_time=96.669 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 95.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7400 bytes_read=19174 bytes_retransmit=9 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.7 mcu_temp: temp=19.4  sysload=1.41 cputime=8.881 memavail=720992 print_time=97.641 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 96.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7842 bytes_read=19704 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.8 mcu_temp: temp=19.5  sysload=1.41 cputime=8.948 memavail=720516 print_time=98.641 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 97.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8284 bytes_read=20249 bytes_retransmit=9 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=29.9 mcu_temp: temp=19.5  sysload=1.41 cputime=9.016 memavail=720516 print_time=99.641 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 98.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=8726 bytes_read=20823 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.5 mcu_temp: temp=19.5  sysload=1.41 cputime=9.083 memavail=720276 print_time=100.641 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 99.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=9317 bytes_read=21392 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.6 mcu_temp: temp=19.4  sysload=1.41 cputime=9.168 memavail=718012 print_time=101.635 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000000
Stats 100.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=10231 bytes_read=22388 bytes_retransmit=9 bytes_invalid=0 send_seq=643 receive_seq=643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.8 mcu_temp: temp=19.5  sysload=1.37 cputime=9.336 memavail=717764 print_time=102.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 101.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=10694 bytes_read=22974 bytes_retransmit=9 bytes_invalid=0 send_seq=680 receive_seq=680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.0 mcu_temp: temp=19.3  sysload=1.37 cputime=9.439 memavail=724576 print_time=103.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 102.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=11164 bytes_read=23550 bytes_retransmit=9 bytes_invalid=0 send_seq=717 receive_seq=717 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=19.5  sysload=1.37 cputime=9.530 memavail=721080 print_time=104.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 103.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=11634 bytes_read=24156 bytes_retransmit=9 bytes_invalid=0 send_seq=754 receive_seq=754 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.5 mcu_temp: temp=19.5  sysload=1.37 cputime=9.619 memavail=720232 print_time=105.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 104.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=12104 bytes_read=24761 bytes_retransmit=9 bytes_invalid=0 send_seq=791 receive_seq=791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=30.5 mcu_temp: temp=19.7  sysload=1.37 cputime=9.697 memavail=720520 print_time=106.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 105.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=12663 bytes_read=25318 bytes_retransmit=9 bytes_invalid=0 send_seq=823 receive_seq=823 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=30.0 mcu_temp: temp=19.5  sysload=1.26 cputime=9.780 memavail=720460 print_time=108.261 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 106.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=12906 bytes_read=25701 bytes_retransmit=9 bytes_invalid=0 send_seq=838 receive_seq=838 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.6 mcu_temp: temp=19.6  sysload=1.26 cputime=9.841 memavail=720512 print_time=108.661 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 107.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=13321 bytes_read=26271 bytes_retransmit=9 bytes_invalid=0 send_seq=868 receive_seq=868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=29.6 mcu_temp: temp=19.6  sysload=1.26 cputime=9.914 memavail=720012 print_time=109.661 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 108.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=13752 bytes_read=26895 bytes_retransmit=9 bytes_invalid=0 send_seq=902 receive_seq=902 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.5 mcu_temp: temp=19.6  sysload=1.26 cputime=9.996 memavail=719800 print_time=110.517 buffer_time=0.027 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 109.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=13870 bytes_read=27201 bytes_retransmit=9 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.6 mcu_temp: temp=19.6  sysload=1.26 cputime=10.051 memavail=719564 print_time=110.517 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 110.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=13960 bytes_read=27516 bytes_retransmit=9 bytes_invalid=0 send_seq=917 receive_seq=917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=29.4 mcu_temp: temp=19.7  sysload=1.16 cputime=10.105 memavail=719824 print_time=110.517 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 111.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=14050 bytes_read=27802 bytes_retransmit=9 bytes_invalid=0 send_seq=924 receive_seq=924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.3 mcu_temp: temp=19.6  sysload=1.16 cputime=10.157 memavail=719824 print_time=110.517 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 112.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=14140 bytes_read=28103 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.5 mcu_temp: temp=19.6  sysload=1.16 cputime=10.210 memavail=719792 print_time=110.517 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 113.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=14230 bytes_read=28433 bytes_retransmit=9 bytes_invalid=0 send_seq=938 receive_seq=938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996972 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.0 mcu_temp: temp=19.7  sysload=1.16 cputime=10.264 memavail=720024 print_time=110.517 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 114.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=14593 bytes_read=28744 bytes_retransmit=9 bytes_invalid=0 send_seq=950 receive_seq=950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996966 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.9 mcu_temp: temp=19.7  sysload=1.16 cputime=10.328 memavail=719692 print_time=121.335 buffer_time=4.842 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 115.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=14704 bytes_read=29055 bytes_retransmit=9 bytes_invalid=0 send_seq=959 receive_seq=959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.1 mcu_temp: temp=19.8  sysload=1.07 cputime=10.383 memavail=719984 print_time=121.335 buffer_time=3.842 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 116.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=14794 bytes_read=29370 bytes_retransmit=9 bytes_invalid=0 send_seq=966 receive_seq=966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.3 mcu_temp: temp=19.6  sysload=1.07 cputime=10.437 memavail=720500 print_time=121.335 buffer_time=2.841 print_stall=1 extruder: target=0 temp=19.0 pwm=0.000
Stats 117.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=14884 bytes_read=29656 bytes_retransmit=9 bytes_invalid=0 send_seq=973 receive_seq=973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.6 mcu_temp: temp=19.8  sysload=1.07 cputime=10.491 memavail=720252 print_time=121.335 buffer_time=1.840 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 118.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=15216 bytes_read=30003 bytes_retransmit=9 bytes_invalid=0 send_seq=984 receive_seq=984 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996958 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.8 mcu_temp: temp=19.8  sysload=1.07 cputime=10.550 memavail=720264 print_time=126.387 buffer_time=5.891 print_stall=1 extruder: target=0 temp=19.2 pwm=0.000
Stats 119.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=15306 bytes_read=30318 bytes_retransmit=9 bytes_invalid=0 send_seq=991 receive_seq=991 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.0 mcu_temp: temp=19.7  sysload=1.07 cputime=10.605 memavail=720264 print_time=126.387 buffer_time=4.890 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 120.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=15396 bytes_read=30604 bytes_retransmit=9 bytes_invalid=0 send_seq=998 receive_seq=998 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.1 mcu_temp: temp=19.7  sysload=1.14 cputime=10.657 memavail=720024 print_time=126.387 buffer_time=3.890 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 121.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=15486 bytes_read=30905 bytes_retransmit=9 bytes_invalid=0 send_seq=1005 receive_seq=1005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.0 mcu_temp: temp=19.7  sysload=1.14 cputime=10.710 memavail=720428 print_time=126.387 buffer_time=2.889 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 122.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=15576 bytes_read=31220 bytes_retransmit=9 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.3 mcu_temp: temp=19.7  sysload=1.14 cputime=10.764 memavail=719924 print_time=126.387 buffer_time=1.888 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 123.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=15666 bytes_read=31506 bytes_retransmit=9 bytes_invalid=0 send_seq=1019 receive_seq=1019 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.0 mcu_temp: temp=19.9  sysload=1.14 cputime=10.817 memavail=719452 print_time=126.387 buffer_time=0.888 print_stall=1 extruder: target=0 temp=19.0 pwm=0.000
Stats 124.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=15756 bytes_read=31822 bytes_retransmit=9 bytes_invalid=0 send_seq=1026 receive_seq=1026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.2 mcu_temp: temp=20.0  sysload=1.14 cputime=10.870 memavail=719452 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.2 pwm=0.000
Stats 125.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=15874 bytes_read=32138 bytes_retransmit=9 bytes_invalid=0 send_seq=1034 receive_seq=1034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.9 mcu_temp: temp=20.0  sysload=1.13 cputime=10.929 memavail=719212 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 126.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=15964 bytes_read=32414 bytes_retransmit=9 bytes_invalid=0 send_seq=1041 receive_seq=1041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.3 mcu_temp: temp=20.1  sysload=1.13 cputime=10.984 memavail=718960 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 127.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=16054 bytes_read=32712 bytes_retransmit=9 bytes_invalid=0 send_seq=1048 receive_seq=1048 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.1 mcu_temp: temp=19.8  sysload=1.13 cputime=11.038 memavail=719392 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 128.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=16144 bytes_read=33027 bytes_retransmit=9 bytes_invalid=0 send_seq=1055 receive_seq=1055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=30.4 mcu_temp: temp=19.9  sysload=1.13 cputime=11.093 memavail=719264 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 129.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=16234 bytes_read=33328 bytes_retransmit=9 bytes_invalid=0 send_seq=1062 receive_seq=1062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=29.9 mcu_temp: temp=20.0  sysload=1.13 cputime=11.146 memavail=719516 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.2 pwm=0.000
Stats 130.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=16324 bytes_read=33629 bytes_retransmit=9 bytes_invalid=0 send_seq=1069 receive_seq=1069 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=29.8 mcu_temp: temp=20.0  sysload=1.12 cputime=11.201 memavail=720084 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 131.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=16414 bytes_read=33944 bytes_retransmit=9 bytes_invalid=0 send_seq=1076 receive_seq=1076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996968 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.1 mcu_temp: temp=20.1  sysload=1.12 cputime=11.254 memavail=720084 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 132.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=16504 bytes_read=34230 bytes_retransmit=9 bytes_invalid=0 send_seq=1083 receive_seq=1083 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996971 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.1 mcu_temp: temp=20.0  sysload=1.12 cputime=11.308 memavail=720620 print_time=126.387 buffer_time=0.000 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 133.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=16778 bytes_read=34560 bytes_retransmit=9 bytes_invalid=0 send_seq=1093 receive_seq=1093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996970 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.4 mcu_temp: temp=19.9  sysload=1.12 cputime=11.369 memavail=720384 print_time=140.681 buffer_time=5.171 print_stall=1 extruder: target=0 temp=19.0 pwm=0.000
Stats 134.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=16954 bytes_read=34886 bytes_retransmit=9 bytes_invalid=0 send_seq=1102 receive_seq=1102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.0 mcu_temp: temp=20.2  sysload=1.12 cputime=11.428 memavail=720384 print_time=140.681 buffer_time=4.170 print_stall=1 extruder: target=0 temp=19.1 pwm=0.000
Stats 135.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=17044 bytes_read=35172 bytes_retransmit=9 bytes_invalid=0 send_seq=1109 receive_seq=1109 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996966 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=30.4 mcu_temp: temp=20.2  sysload=1.11 cputime=11.480 memavail=720144 print_time=140.681 buffer_time=3.169 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 136.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=17157 bytes_read=35497 bytes_retransmit=9 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996963 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.6 mcu_temp: temp=20.0  sysload=1.11 cputime=11.535 memavail=720396 print_time=140.681 buffer_time=2.168 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 137.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=17247 bytes_read=35798 bytes_retransmit=9 bytes_invalid=0 send_seq=1125 receive_seq=1125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996958 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.9 mcu_temp: temp=20.3  sysload=1.11 cputime=11.588 memavail=720396 print_time=140.681 buffer_time=1.168 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 138.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=17573 bytes_read=36099 bytes_retransmit=9 bytes_invalid=0 send_seq=1135 receive_seq=1135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=30.8 mcu_temp: temp=20.2  sysload=1.11 cputime=11.643 memavail=720684 print_time=145.733 buffer_time=5.219 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 139.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=17663 bytes_read=36429 bytes_retransmit=9 bytes_invalid=0 send_seq=1142 receive_seq=1142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.8 mcu_temp: temp=20.3  sysload=1.11 cputime=11.695 memavail=720684 print_time=145.733 buffer_time=4.218 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 140.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=17753 bytes_read=36730 bytes_retransmit=9 bytes_invalid=0 send_seq=1149 receive_seq=1149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=30.9 mcu_temp: temp=20.2  sysload=1.10 cputime=11.748 memavail=720440 print_time=145.733 buffer_time=3.217 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 141.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=17843 bytes_read=37016 bytes_retransmit=9 bytes_invalid=0 send_seq=1156 receive_seq=1156 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.0 mcu_temp: temp=20.2  sysload=1.10 cputime=11.800 memavail=720192 print_time=145.733 buffer_time=2.217 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 142.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=17933 bytes_read=37331 bytes_retransmit=9 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.7 mcu_temp: temp=20.4  sysload=1.10 cputime=11.853 memavail=720192 print_time=145.733 buffer_time=1.216 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 143.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=18023 bytes_read=37632 bytes_retransmit=9 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=31.0 mcu_temp: temp=20.3  sysload=1.10 cputime=11.907 memavail=719940 print_time=145.733 buffer_time=0.216 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 144.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=18146 bytes_read=37943 bytes_retransmit=9 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.0 mcu_temp: temp=20.3  sysload=1.10 cputime=11.962 memavail=719940 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 145.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=18236 bytes_read=38258 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=30.6 mcu_temp: temp=20.4  sysload=1.09 cputime=12.017 memavail=719896 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 146.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=18326 bytes_read=38559 bytes_retransmit=9 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.8 mcu_temp: temp=20.3  sysload=1.09 cputime=12.071 memavail=719952 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 147.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=18416 bytes_read=38845 bytes_retransmit=9 bytes_invalid=0 send_seq=1200 receive_seq=1200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.7 mcu_temp: temp=20.4  sysload=1.09 cputime=12.124 memavail=720152 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 148.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=18506 bytes_read=39160 bytes_retransmit=9 bytes_invalid=0 send_seq=1207 receive_seq=1207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.9 mcu_temp: temp=20.2  sysload=1.09 cputime=12.177 memavail=719716 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 149.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=18596 bytes_read=39476 bytes_retransmit=9 bytes_invalid=0 send_seq=1214 receive_seq=1214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.5 mcu_temp: temp=20.4  sysload=1.09 cputime=12.232 memavail=719728 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 150.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=18686 bytes_read=39762 bytes_retransmit=9 bytes_invalid=0 send_seq=1221 receive_seq=1221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.8 mcu_temp: temp=20.5  sysload=1.09 cputime=12.288 memavail=719988 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 151.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=18776 bytes_read=40069 bytes_retransmit=9 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.2 mcu_temp: temp=20.5  sysload=1.09 cputime=12.341 memavail=719988 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 152.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=18866 bytes_read=40362 bytes_retransmit=9 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.2 mcu_temp: temp=20.3  sysload=1.09 cputime=12.394 memavail=720092 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 153.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=18956 bytes_read=40648 bytes_retransmit=9 bytes_invalid=0 send_seq=1242 receive_seq=1242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.9 mcu_temp: temp=20.5  sysload=1.09 cputime=12.447 memavail=719892 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 154.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19046 bytes_read=40978 bytes_retransmit=9 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.8 mcu_temp: temp=20.5  sysload=1.09 cputime=12.500 memavail=720392 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 155.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19136 bytes_read=41279 bytes_retransmit=9 bytes_invalid=0 send_seq=1256 receive_seq=1256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.9 mcu_temp: temp=20.5  sysload=1.00 cputime=12.552 memavail=719904 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 156.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19226 bytes_read=41565 bytes_retransmit=9 bytes_invalid=0 send_seq=1263 receive_seq=1263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=30.9 mcu_temp: temp=20.5  sysload=1.00 cputime=12.603 memavail=720148 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 157.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19316 bytes_read=41880 bytes_retransmit=9 bytes_invalid=0 send_seq=1270 receive_seq=1270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=31.5 mcu_temp: temp=20.5  sysload=1.00 cputime=12.655 memavail=720444 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 158.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19406 bytes_read=42181 bytes_retransmit=9 bytes_invalid=0 send_seq=1277 receive_seq=1277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.2 mcu_temp: temp=20.6  sysload=1.00 cputime=12.706 memavail=720448 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 159.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19496 bytes_read=42482 bytes_retransmit=9 bytes_invalid=0 send_seq=1284 receive_seq=1284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.2 mcu_temp: temp=20.4  sysload=1.00 cputime=12.757 memavail=720448 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 160.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19586 bytes_read=42797 bytes_retransmit=9 bytes_invalid=0 send_seq=1291 receive_seq=1291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.2 mcu_temp: temp=20.7  sysload=0.92 cputime=12.809 memavail=720208 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 161.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19676 bytes_read=43098 bytes_retransmit=9 bytes_invalid=0 send_seq=1298 receive_seq=1298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.0 mcu_temp: temp=20.5  sysload=0.92 cputime=12.862 memavail=720408 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 162.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19766 bytes_read=43384 bytes_retransmit=9 bytes_invalid=0 send_seq=1305 receive_seq=1305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.3 mcu_temp: temp=20.6  sysload=0.92 cputime=12.913 memavail=720492 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 163.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19856 bytes_read=43699 bytes_retransmit=9 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.3 mcu_temp: temp=20.7  sysload=0.92 cputime=12.968 memavail=720492 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 164.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19946 bytes_read=44015 bytes_retransmit=9 bytes_invalid=0 send_seq=1319 receive_seq=1319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.4 mcu_temp: temp=20.5  sysload=0.92 cputime=13.020 memavail=720240 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 165.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20036 bytes_read=44301 bytes_retransmit=9 bytes_invalid=0 send_seq=1326 receive_seq=1326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.7 mcu_temp: temp=20.8  sysload=0.85 cputime=13.071 memavail=719992 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 166.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20126 bytes_read=44616 bytes_retransmit=9 bytes_invalid=0 send_seq=1333 receive_seq=1333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.6 mcu_temp: temp=20.7  sysload=0.85 cputime=13.123 memavail=720000 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 167.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20216 bytes_read=44917 bytes_retransmit=9 bytes_invalid=0 send_seq=1340 receive_seq=1340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.6 mcu_temp: temp=20.5  sysload=0.85 cputime=13.175 memavail=720000 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 168.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20306 bytes_read=45203 bytes_retransmit=9 bytes_invalid=0 send_seq=1347 receive_seq=1347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.6 mcu_temp: temp=20.7  sysload=0.85 cputime=13.228 memavail=720056 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 169.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20396 bytes_read=45533 bytes_retransmit=9 bytes_invalid=0 send_seq=1354 receive_seq=1354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.9 mcu_temp: temp=20.7  sysload=0.85 cputime=13.279 memavail=720056 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 170.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20486 bytes_read=45834 bytes_retransmit=9 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.7 mcu_temp: temp=20.8  sysload=0.78 cputime=13.332 memavail=719804 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 171.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20576 bytes_read=46120 bytes_retransmit=9 bytes_invalid=0 send_seq=1368 receive_seq=1368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.8 mcu_temp: temp=20.9  sysload=0.78 cputime=13.383 memavail=719812 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 172.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20666 bytes_read=46435 bytes_retransmit=9 bytes_invalid=0 send_seq=1375 receive_seq=1375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.7 mcu_temp: temp=20.7  sysload=0.78 cputime=13.437 memavail=719812 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 173.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20756 bytes_read=46736 bytes_retransmit=9 bytes_invalid=0 send_seq=1382 receive_seq=1382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.0 mcu_temp: temp=21.0  sysload=0.78 cputime=13.489 memavail=719816 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 174.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20846 bytes_read=47037 bytes_retransmit=9 bytes_invalid=0 send_seq=1389 receive_seq=1389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=31.9 mcu_temp: temp=20.8  sysload=0.78 cputime=13.540 memavail=719848 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 175.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20936 bytes_read=47352 bytes_retransmit=9 bytes_invalid=0 send_seq=1396 receive_seq=1396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=20.8  sysload=0.71 cputime=13.593 memavail=719856 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 176.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21026 bytes_read=47650 bytes_retransmit=9 bytes_invalid=0 send_seq=1403 receive_seq=1403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=21.0  sysload=0.71 cputime=13.643 memavail=719856 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 177.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21116 bytes_read=47926 bytes_retransmit=9 bytes_invalid=0 send_seq=1410 receive_seq=1410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=21.0  sysload=0.71 cputime=13.694 memavail=720112 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 178.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21206 bytes_read=48236 bytes_retransmit=9 bytes_invalid=0 send_seq=1417 receive_seq=1417 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.4 mcu_temp: temp=20.9  sysload=0.71 cputime=13.746 memavail=720360 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 179.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21296 bytes_read=48552 bytes_retransmit=9 bytes_invalid=0 send_seq=1424 receive_seq=1424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=21.1  sysload=0.71 cputime=13.797 memavail=720408 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 180.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21392 bytes_read=48854 bytes_retransmit=9 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.9 mcu_temp: temp=21.1  sysload=0.90 cputime=13.849 memavail=720156 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 181.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21482 bytes_read=49169 bytes_retransmit=9 bytes_invalid=0 send_seq=1439 receive_seq=1439 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=31.7 mcu_temp: temp=21.0  sysload=0.90 cputime=13.901 memavail=720160 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 182.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21572 bytes_read=49470 bytes_retransmit=9 bytes_invalid=0 send_seq=1446 receive_seq=1446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.8 mcu_temp: temp=21.2  sysload=0.90 cputime=13.952 memavail=720860 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 183.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21662 bytes_read=49756 bytes_retransmit=9 bytes_invalid=0 send_seq=1453 receive_seq=1453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.6 mcu_temp: temp=21.1  sysload=0.90 cputime=14.003 memavail=720988 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 184.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21752 bytes_read=50086 bytes_retransmit=9 bytes_invalid=0 send_seq=1460 receive_seq=1460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=21.0  sysload=0.90 cputime=14.056 memavail=721744 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 185.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21842 bytes_read=50387 bytes_retransmit=9 bytes_invalid=0 send_seq=1467 receive_seq=1467 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.8 mcu_temp: temp=21.0  sysload=0.91 cputime=14.109 memavail=721944 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 186.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21932 bytes_read=50673 bytes_retransmit=9 bytes_invalid=0 send_seq=1474 receive_seq=1474 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=21.3  sysload=0.91 cputime=14.160 memavail=722336 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 187.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22022 bytes_read=50988 bytes_retransmit=9 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996963 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.7 mcu_temp: temp=21.1  sysload=0.91 cputime=14.214 memavail=722640 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 188.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22112 bytes_read=51289 bytes_retransmit=9 bytes_invalid=0 send_seq=1488 receive_seq=1488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=32.0 mcu_temp: temp=21.4  sysload=0.91 cputime=14.266 memavail=722632 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 189.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22202 bytes_read=51590 bytes_retransmit=9 bytes_invalid=0 send_seq=1495 receive_seq=1495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=21.3  sysload=0.91 cputime=14.317 memavail=722676 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 190.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22292 bytes_read=51920 bytes_retransmit=9 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=31.6 mcu_temp: temp=21.2  sysload=1.07 cputime=14.370 memavail=722424 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 191.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22382 bytes_read=52206 bytes_retransmit=9 bytes_invalid=0 send_seq=1509 receive_seq=1509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996965 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=21.2  sysload=1.07 cputime=14.421 memavail=722908 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 192.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22472 bytes_read=52492 bytes_retransmit=9 bytes_invalid=0 send_seq=1516 receive_seq=1516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996965 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=21.2  sysload=1.07 cputime=14.472 memavail=722952 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 193.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22562 bytes_read=52822 bytes_retransmit=9 bytes_invalid=0 send_seq=1523 receive_seq=1523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.4 mcu_temp: temp=21.0  sysload=1.07 cputime=14.525 memavail=723208 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 194.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22652 bytes_read=53123 bytes_retransmit=9 bytes_invalid=0 send_seq=1530 receive_seq=1530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=21.2  sysload=1.07 cputime=14.575 memavail=723244 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 195.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22742 bytes_read=53409 bytes_retransmit=9 bytes_invalid=0 send_seq=1537 receive_seq=1537 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=31.9 mcu_temp: temp=21.1  sysload=1.07 cputime=14.627 memavail=722996 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.3 pwm=0.000
Stats 196.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22832 bytes_read=53739 bytes_retransmit=9 bytes_invalid=0 send_seq=1544 receive_seq=1544 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=21.2  sysload=1.07 cputime=14.680 memavail=723260 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 197.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22922 bytes_read=54025 bytes_retransmit=9 bytes_invalid=0 send_seq=1551 receive_seq=1551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996969 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=31.9 mcu_temp: temp=21.3  sysload=1.07 cputime=14.731 memavail=724020 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 198.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=23012 bytes_read=54311 bytes_retransmit=9 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=32.5 mcu_temp: temp=21.4  sysload=1.07 cputime=14.782 memavail=724048 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.0 pwm=0.000
Stats 199.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=23102 bytes_read=54656 bytes_retransmit=9 bytes_invalid=0 send_seq=1565 receive_seq=1565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996968 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=21.4  sysload=1.07 cputime=14.835 memavail=724300 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 200.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=23192 bytes_read=54942 bytes_retransmit=9 bytes_invalid=0 send_seq=1572 receive_seq=1572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996969 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.1 mcu_temp: temp=21.5  sysload=0.98 cputime=14.887 memavail=724300 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Stats 201.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=23282 bytes_read=55228 bytes_retransmit=9 bytes_invalid=0 send_seq=1579 receive_seq=1579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.8 mcu_temp: temp=21.5  sysload=0.98 cputime=14.938 memavail=724308 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 202.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=23372 bytes_read=55548 bytes_retransmit=9 bytes_invalid=0 send_seq=1586 receive_seq=1586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996973 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.3 mcu_temp: temp=21.5  sysload=0.98 cputime=14.991 memavail=724560 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.3 pwm=0.000
Stats 203.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=23462 bytes_read=55825 bytes_retransmit=9 bytes_invalid=0 send_seq=1593 receive_seq=1593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996978 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.4 mcu_temp: temp=21.4  sysload=0.98 cputime=15.042 memavail=724308 print_time=145.733 buffer_time=0.000 print_stall=2 extruder: target=0 temp=19.2 pwm=0.000
Stats 207.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=23884 bytes_read=57058 bytes_retransmit=9 bytes_invalid=0 send_seq=1624 receive_seq=1624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.6 mcu_temp: temp=21.5  sysload=0.90 cputime=15.258 memavail=723720 print_time=210.298 buffer_time=0.738 print_stall=2 extruder: target=0 temp=19.1 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473053330592: Disconnected
Restarting printer
Start printer at Fri May 19 01:11:14 2023 (1684458674.6 209.2)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473035407904: New connection
webhooks client 281473035407904: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 212.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=4636 bytes_read=5982 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=239 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=547 upcoming_bytes=10 freq=168038815 heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=0.0  sysload=0.91 cputime=18.268 memavail=720956 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473035407904
webhooks: registering remote method 'reboot_machine' for connection id: 281473035407904
webhooks: registering remote method 'pause_job_queue' for connection id: 281473035407904
webhooks: registering remote method 'start_job_queue' for connection id: 281473035407904
Stats 213.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000065 mcu_task_stddev=0.000208 bytes_write=5262 bytes_read=6233 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=168004469 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=21.5  sysload=0.91 cputime=18.326 memavail=720956 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 214.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000065 mcu_task_stddev=0.000208 bytes_write=5301 bytes_read=6391 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167998013 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.6 mcu_temp: temp=21.7  sysload=0.91 cputime=18.374 memavail=721472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 215.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000065 mcu_task_stddev=0.000208 bytes_write=5307 bytes_read=6554 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996474 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=21.6  sysload=0.84 cputime=18.405 memavail=721228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 216.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000065 mcu_task_stddev=0.000208 bytes_write=5313 bytes_read=6731 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996244 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.6 mcu_temp: temp=21.5  sysload=0.84 cputime=18.436 memavail=721508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 217.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000065 mcu_task_stddev=0.000208 bytes_write=5319 bytes_read=6879 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996455 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=32.9 mcu_temp: temp=21.9  sysload=0.84 cputime=18.467 memavail=721712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 218.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5325 bytes_read=7057 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996343 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=32.5 mcu_temp: temp=21.6  sysload=0.84 cputime=18.498 memavail=721764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 219.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5331 bytes_read=7234 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996362 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.5 mcu_temp: temp=21.5  sysload=0.84 cputime=18.529 memavail=722012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 220.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5337 bytes_read=7382 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996699 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=33.0 mcu_temp: temp=21.6  sysload=0.77 cputime=18.560 memavail=721516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 221.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5343 bytes_read=7545 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.9 mcu_temp: temp=21.7  sysload=0.77 cputime=18.593 memavail=721780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 222.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5349 bytes_read=7722 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=21.8  sysload=0.77 cputime=18.624 memavail=721340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 223.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5355 bytes_read=7884 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=32.9 mcu_temp: temp=21.8  sysload=0.77 cputime=18.656 memavail=721340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 224.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5361 bytes_read=8047 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996655 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=21.9  sysload=0.77 cputime=18.687 memavail=721340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 225.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5367 bytes_read=8224 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996658 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=32.8 mcu_temp: temp=21.7  sysload=0.71 cputime=18.718 memavail=721340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 226.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5373 bytes_read=8372 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996822 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.1 mcu_temp: temp=21.7  sysload=0.71 cputime=18.751 memavail=720836 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 227.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5379 bytes_read=8535 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996802 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=21.8  sysload=0.71 cputime=18.782 memavail=720844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 228.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5385 bytes_read=8726 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996779 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.1 mcu_temp: temp=21.9  sysload=0.71 cputime=18.814 memavail=721064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 229.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5391 bytes_read=8874 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996788 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.6 mcu_temp: temp=21.9  sysload=0.71 cputime=18.845 memavail=721100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 230.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5397 bytes_read=9037 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996784 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.1 mcu_temp: temp=21.9  sysload=0.65 cputime=18.877 memavail=721100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 231.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5403 bytes_read=9214 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996790 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.8 mcu_temp: temp=21.9  sysload=0.65 cputime=18.909 memavail=721100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 232.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5409 bytes_read=9362 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996788 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.4 mcu_temp: temp=21.9  sysload=0.65 cputime=18.940 memavail=721640 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 233.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5415 bytes_read=9532 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996805 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=33.6 mcu_temp: temp=21.9  sysload=0.65 cputime=18.972 memavail=721168 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 234.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5421 bytes_read=9699 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996810 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.9 mcu_temp: temp=22.0  sysload=0.65 cputime=19.003 memavail=721452 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 235.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5427 bytes_read=9847 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996825 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=32.9 mcu_temp: temp=22.0  sysload=0.60 cputime=19.034 memavail=721700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 236.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5433 bytes_read=10010 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996829 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.4 mcu_temp: temp=22.0  sysload=0.60 cputime=19.066 memavail=721200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 237.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5439 bytes_read=10187 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.1 mcu_temp: temp=21.9  sysload=0.60 cputime=19.099 memavail=721708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 238.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5445 bytes_read=10349 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996852 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.5 mcu_temp: temp=22.0  sysload=0.60 cputime=19.129 memavail=721932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 239.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5451 bytes_read=10512 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.3 mcu_temp: temp=22.0  sysload=0.60 cputime=19.160 memavail=722472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 240.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5457 bytes_read=10689 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.0  sysload=0.55 cputime=19.191 memavail=722248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 241.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5463 bytes_read=10837 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.1  sysload=0.55 cputime=19.221 memavail=723008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 242.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5469 bytes_read=11000 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.1  sysload=0.55 cputime=19.252 memavail=722788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 243.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5475 bytes_read=11191 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=33.5 mcu_temp: temp=22.0  sysload=0.55 cputime=19.284 memavail=722024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 244.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5481 bytes_read=11339 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.5 mcu_temp: temp=22.1  sysload=0.55 cputime=19.315 memavail=721712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 245.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5487 bytes_read=11502 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=21.9  sysload=0.51 cputime=19.346 memavail=721716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 246.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5493 bytes_read=11679 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=33.4 mcu_temp: temp=22.1  sysload=0.51 cputime=19.378 memavail=721252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 247.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5505 bytes_read=11843 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=22.3  sysload=0.51 cputime=19.409 memavail=721504 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 248.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5511 bytes_read=12020 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.5 mcu_temp: temp=22.3  sysload=0.51 cputime=19.441 memavail=721708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 249.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5517 bytes_read=12197 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.6 mcu_temp: temp=22.1  sysload=0.51 cputime=19.472 memavail=721760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 250.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5523 bytes_read=12345 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=33.6 mcu_temp: temp=22.2  sysload=0.47 cputime=19.503 memavail=721772 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 251.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5529 bytes_read=12522 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=33.5 mcu_temp: temp=22.1  sysload=0.47 cputime=19.536 memavail=721776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 252.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5535 bytes_read=12685 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=34.0 mcu_temp: temp=22.1  sysload=0.47 cputime=19.567 memavail=721816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 253.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5541 bytes_read=12847 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=22.0  sysload=0.47 cputime=19.598 memavail=721556 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 254.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5547 bytes_read=13024 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=22.1  sysload=0.47 cputime=19.630 memavail=721812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 255.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5553 bytes_read=13187 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.9 mcu_temp: temp=22.3  sysload=0.43 cputime=19.661 memavail=722116 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 256.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5559 bytes_read=13335 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=22.1  sysload=0.43 cputime=19.692 memavail=722316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 257.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5565 bytes_read=13512 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=34.0 mcu_temp: temp=22.1  sysload=0.43 cputime=19.725 memavail=722124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 258.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5571 bytes_read=13686 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=0 temp=18.9 pwm=0.000 raspberry_pi: temp=34.8 mcu_temp: temp=22.2  sysload=0.43 cputime=19.757 memavail=722156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 259.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5577 bytes_read=13824 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=34.1 mcu_temp: temp=22.2  sysload=0.43 cputime=19.788 memavail=722156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 260.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5583 bytes_read=13996 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.5 mcu_temp: temp=22.3  sysload=0.39 cputime=19.819 memavail=721904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 261.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5589 bytes_read=14159 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.5 mcu_temp: temp=22.3  sysload=0.39 cputime=19.850 memavail=721904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 262.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5595 bytes_read=14307 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996958 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.6 mcu_temp: temp=22.2  sysload=0.39 cputime=19.881 memavail=721160 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 263.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5601 bytes_read=14498 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.6 mcu_temp: temp=22.1  sysload=0.39 cputime=19.913 memavail=720688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 264.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5607 bytes_read=14661 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.6 mcu_temp: temp=22.2  sysload=0.39 cputime=19.944 memavail=720940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 265.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5613 bytes_read=14809 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=0 temp=19.0 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=22.2  sysload=0.36 cputime=19.974 memavail=720940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 266.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5619 bytes_read=14986 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996959 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=22.5  sysload=0.36 cputime=20.006 memavail=721068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 267.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5625 bytes_read=15149 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=0 temp=19.1 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=22.1  sysload=0.36 cputime=20.038 memavail=721024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Heater heater_bed approaching new target of 60.000
Heater extruder approaching new target of 200.000
Stats 294.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6045 bytes_read=19637 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997021 heater_bed: target=60 temp=19.0 pwm=1.000 raspberry_pi: temp=34.4 mcu_temp: temp=22.6  sysload=0.24 cputime=20.891 memavail=722424 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=19.1 pwm=1.000
Stats 295.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6110 bytes_read=19800 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=60 temp=19.1 pwm=1.000 raspberry_pi: temp=34.3 mcu_temp: temp=22.7  sysload=0.22 cputime=20.924 memavail=722428 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=19.2 pwm=1.000
Stats 296.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6135 bytes_read=19987 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=60 temp=19.6 pwm=1.000 raspberry_pi: temp=34.0 mcu_temp: temp=22.5  sysload=0.22 cputime=20.957 memavail=722680 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=19.4 pwm=1.000
Stats 297.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6164 bytes_read=20160 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=60 temp=19.9 pwm=1.000 raspberry_pi: temp=34.2 mcu_temp: temp=22.5  sysload=0.22 cputime=20.991 memavail=721676 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=19.9 pwm=1.000
Stats 298.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000027 mcu_task_stddev=0.000118 bytes_write=6242 bytes_read=20354 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997016 heater_bed: target=60 temp=20.1 pwm=1.000 raspberry_pi: temp=34.3 mcu_temp: temp=22.6  sysload=0.22 cputime=21.025 memavail=721676 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=20.6 pwm=1.000
Stats 299.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000027 mcu_task_stddev=0.000118 bytes_write=6276 bytes_read=20541 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=60 temp=20.5 pwm=1.000 raspberry_pi: temp=34.0 mcu_temp: temp=22.5  sysload=0.22 cputime=21.058 memavail=721984 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=21.6 pwm=1.000
Stats 300.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000027 mcu_task_stddev=0.000118 bytes_write=6314 bytes_read=20714 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=60 temp=20.9 pwm=1.000 raspberry_pi: temp=34.0 mcu_temp: temp=22.5  sysload=0.36 cputime=21.091 memavail=721984 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=23.3 pwm=1.000
Stats 301.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000027 mcu_task_stddev=0.000118 bytes_write=6348 bytes_read=20872 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=21.2 pwm=1.000 raspberry_pi: temp=34.3 mcu_temp: temp=22.4  sysload=0.36 cputime=21.122 memavail=721984 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=25.0 pwm=1.000
Stats 302.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000027 mcu_task_stddev=0.000118 bytes_write=6417 bytes_read=21074 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997017 heater_bed: target=60 temp=21.8 pwm=1.000 raspberry_pi: temp=34.3 mcu_temp: temp=22.6  sysload=0.36 cputime=21.156 memavail=722768 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=26.7 pwm=1.000
Stats 303.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=6490 bytes_read=21277 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=60 temp=22.1 pwm=1.000 raspberry_pi: temp=34.6 mcu_temp: temp=22.6  sysload=0.36 cputime=21.191 memavail=723288 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=29.2 pwm=1.000
Stats 304.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=6543 bytes_read=21445 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=60 temp=22.5 pwm=1.000 raspberry_pi: temp=34.0 mcu_temp: temp=22.6  sysload=0.36 cputime=21.223 memavail=723796 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=31.2 pwm=1.000
Stats 305.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=6593 bytes_read=21637 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997002 heater_bed: target=60 temp=23.0 pwm=1.000 raspberry_pi: temp=34.4 mcu_temp: temp=22.7  sysload=0.33 cputime=21.256 memavail=723544 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=33.4 pwm=1.000
Stats 306.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=6655 bytes_read=21820 bytes_retransmit=9 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=23.3 pwm=1.000 raspberry_pi: temp=34.2 mcu_temp: temp=22.9  sysload=0.33 cputime=21.290 memavail=723320 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=36.2 pwm=1.000
Stats 307.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=6740 bytes_read=21998 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=23.8 pwm=1.000 raspberry_pi: temp=34.2 mcu_temp: temp=22.7  sysload=0.33 cputime=21.324 memavail=722816 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=38.5 pwm=1.000
Stats 308.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=6802 bytes_read=22210 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=60 temp=24.2 pwm=1.000 raspberry_pi: temp=35.0 mcu_temp: temp=22.7  sysload=0.33 cputime=21.358 memavail=722824 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=40.7 pwm=1.000
Stats 310.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=6863 bytes_read=22409 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997026 heater_bed: target=60 temp=24.6 pwm=1.000 raspberry_pi: temp=34.3 mcu_temp: temp=22.6  sysload=0.33 cputime=21.393 memavail=722840 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=43.8 pwm=1.000
Stats 311.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=6920 bytes_read=22567 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997025 heater_bed: target=60 temp=25.1 pwm=1.000 raspberry_pi: temp=34.4 mcu_temp: temp=22.7  sysload=0.30 cputime=21.425 memavail=722840 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=46.2 pwm=1.000
Stats 312.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=6986 bytes_read=22758 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=60 temp=25.5 pwm=1.000 raspberry_pi: temp=34.8 mcu_temp: temp=22.7  sysload=0.30 cputime=21.459 memavail=722592 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.3 pwm=1.000
Stats 313.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=7039 bytes_read=22941 bytes_retransmit=9 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=60 temp=25.9 pwm=1.000 raspberry_pi: temp=34.5 mcu_temp: temp=22.6  sysload=0.30 cputime=21.493 memavail=721880 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=51.6 pwm=1.000
Stats 314.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7103 bytes_read=23124 bytes_retransmit=9 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=60 temp=26.2 pwm=1.000 raspberry_pi: temp=34.6 mcu_temp: temp=22.7  sysload=0.30 cputime=21.529 memavail=721888 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=54.0 pwm=1.000
Stats 315.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7156 bytes_read=23336 bytes_retransmit=9 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=60 temp=26.8 pwm=1.000 raspberry_pi: temp=34.9 mcu_temp: temp=22.7  sysload=0.30 cputime=21.562 memavail=721888 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=57.1 pwm=1.000
Stats 316.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7245 bytes_read=23514 bytes_retransmit=9 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997021 heater_bed: target=60 temp=27.1 pwm=1.000 raspberry_pi: temp=34.5 mcu_temp: temp=22.7  sysload=0.28 cputime=21.595 memavail=721888 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=59.4 pwm=1.000
Stats 317.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7298 bytes_read=23682 bytes_retransmit=9 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997038 heater_bed: target=60 temp=27.4 pwm=1.000 raspberry_pi: temp=34.8 mcu_temp: temp=22.9  sysload=0.28 cputime=21.628 memavail=721836 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=61.7 pwm=1.000
Stats 318.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7353 bytes_read=23894 bytes_retransmit=9 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997036 heater_bed: target=60 temp=27.9 pwm=1.000 raspberry_pi: temp=34.7 mcu_temp: temp=22.7  sysload=0.28 cputime=21.662 memavail=721888 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=64.7 pwm=1.000
Stats 319.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7415 bytes_read=24077 bytes_retransmit=9 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997033 heater_bed: target=60 temp=28.3 pwm=1.000 raspberry_pi: temp=34.3 mcu_temp: temp=22.6  sysload=0.28 cputime=21.696 memavail=721772 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=67.0 pwm=1.000
Stats 320.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7495 bytes_read=24250 bytes_retransmit=9 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997034 heater_bed: target=60 temp=28.6 pwm=1.000 raspberry_pi: temp=34.5 mcu_temp: temp=22.9  sysload=0.28 cputime=21.729 memavail=721524 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=69.2 pwm=1.000
Stats 321.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7533 bytes_read=24452 bytes_retransmit=9 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997033 heater_bed: target=60 temp=29.0 pwm=1.000 raspberry_pi: temp=34.3 mcu_temp: temp=22.9  sysload=0.34 cputime=21.763 memavail=721528 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=72.2 pwm=1.000
Stats 322.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7588 bytes_read=24620 bytes_retransmit=9 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997036 heater_bed: target=60 temp=29.3 pwm=1.000 raspberry_pi: temp=34.8 mcu_temp: temp=22.7  sysload=0.34 cputime=21.797 memavail=721528 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=74.4 pwm=1.000
Stats 323.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7641 bytes_read=24788 bytes_retransmit=9 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997039 heater_bed: target=60 temp=29.7 pwm=1.000 raspberry_pi: temp=34.9 mcu_temp: temp=23.0  sysload=0.34 cputime=21.829 memavail=721276 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=76.7 pwm=1.000
Stats 324.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7721 bytes_read=25020 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997041 heater_bed: target=60 temp=30.1 pwm=1.000 raspberry_pi: temp=35.3 mcu_temp: temp=22.9  sysload=0.34 cputime=21.865 memavail=721044 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=79.6 pwm=1.000
Stats 325.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7790 bytes_read=25193 bytes_retransmit=9 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997038 heater_bed: target=60 temp=30.4 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.0  sysload=0.34 cputime=21.898 memavail=721044 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=81.7 pwm=1.000
Stats 326.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7845 bytes_read=25361 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997035 heater_bed: target=60 temp=30.7 pwm=1.000 raspberry_pi: temp=35.2 mcu_temp: temp=22.9  sysload=0.31 cputime=21.930 memavail=721352 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=83.9 pwm=1.000
Stats 327.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7907 bytes_read=25573 bytes_retransmit=9 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997031 heater_bed: target=60 temp=31.2 pwm=1.000 raspberry_pi: temp=35.4 mcu_temp: temp=22.7  sysload=0.31 cputime=21.964 memavail=721600 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=86.7 pwm=1.000
Stats 328.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7960 bytes_read=25741 bytes_retransmit=9 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=60 temp=31.5 pwm=1.000 raspberry_pi: temp=34.9 mcu_temp: temp=22.9  sysload=0.31 cputime=21.997 memavail=721864 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=88.8 pwm=1.000
Stats 329.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=8045 bytes_read=25949 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=60 temp=31.9 pwm=1.000 raspberry_pi: temp=36.0 mcu_temp: temp=22.8  sysload=0.31 cputime=22.032 memavail=721720 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=90.8 pwm=1.000
Stats 330.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=8100 bytes_read=26146 bytes_retransmit=9 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997021 heater_bed: target=60 temp=32.2 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.0  sysload=0.31 cputime=22.066 memavail=722224 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=93.6 pwm=1.000
Stats 331.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=8153 bytes_read=26314 bytes_retransmit=9 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997019 heater_bed: target=60 temp=32.5 pwm=1.000 raspberry_pi: temp=34.3 mcu_temp: temp=22.9  sysload=0.29 cputime=22.099 memavail=722224 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=95.6 pwm=1.000
Stats 332.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=8206 bytes_read=26497 bytes_retransmit=9 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=60 temp=33.0 pwm=1.000 raspberry_pi: temp=34.6 mcu_temp: temp=22.9  sysload=0.29 cputime=22.132 memavail=722728 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=97.6 pwm=1.000
Stats 333.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=8291 bytes_read=26704 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=60 temp=33.2 pwm=1.000 raspberry_pi: temp=34.8 mcu_temp: temp=23.0  sysload=0.29 cputime=22.166 memavail=723208 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=100.3 pwm=1.000
Stats 334.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=8346 bytes_read=26887 bytes_retransmit=9 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=33.4 pwm=1.000 raspberry_pi: temp=35.7 mcu_temp: temp=22.9  sysload=0.29 cputime=22.199 memavail=722816 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=102.3 pwm=1.000
Stats 335.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=8394 bytes_read=27065 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=33.8 pwm=1.000 raspberry_pi: temp=34.7 mcu_temp: temp=23.0  sysload=0.29 cputime=22.233 memavail=722820 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=104.2 pwm=1.000
Stats 336.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=8456 bytes_read=27256 bytes_retransmit=9 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=34.1 pwm=1.000 raspberry_pi: temp=34.9 mcu_temp: temp=23.1  sysload=0.26 cputime=22.269 memavail=722824 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=106.8 pwm=1.000
Stats 337.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=8536 bytes_read=27419 bytes_retransmit=9 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=34.4 pwm=1.000 raspberry_pi: temp=34.4 mcu_temp: temp=22.9  sysload=0.26 cputime=22.308 memavail=723076 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=108.7 pwm=1.000
Stats 338.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=8570 bytes_read=27592 bytes_retransmit=9 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=60 temp=34.7 pwm=1.000 raspberry_pi: temp=34.5 mcu_temp: temp=23.0  sysload=0.26 cputime=22.346 memavail=723076 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=110.6 pwm=1.000
Stats 339.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=8625 bytes_read=27804 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=35.0 pwm=1.000 raspberry_pi: temp=35.2 mcu_temp: temp=23.2  sysload=0.26 cputime=22.385 memavail=722856 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=113.1 pwm=1.000
Stats 340.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=8678 bytes_read=27972 bytes_retransmit=9 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=35.3 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.2  sysload=0.26 cputime=22.423 memavail=722860 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=115.0 pwm=1.000
Stats 341.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=8763 bytes_read=28165 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=35.6 pwm=1.000 raspberry_pi: temp=35.2 mcu_temp: temp=23.3  sysload=0.24 cputime=22.462 memavail=723112 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=116.9 pwm=1.000
Stats 342.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=8820 bytes_read=28362 bytes_retransmit=9 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=60 temp=35.9 pwm=1.000 raspberry_pi: temp=35.2 mcu_temp: temp=23.2  sysload=0.24 cputime=22.501 memavail=723112 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=119.3 pwm=1.000
Stats 343.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=8873 bytes_read=28530 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=60 temp=36.1 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.1  sysload=0.24 cputime=22.538 memavail=723112 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=121.1 pwm=1.000
Stats 344.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8928 bytes_read=28728 bytes_retransmit=9 bytes_invalid=0 send_seq=601 receive_seq=601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=60 temp=36.4 pwm=1.000 raspberry_pi: temp=34.9 mcu_temp: temp=23.1  sysload=0.24 cputime=22.576 memavail=723312 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=122.9 pwm=1.000
Stats 345.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8997 bytes_read=28930 bytes_retransmit=9 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997018 heater_bed: target=60 temp=36.7 pwm=1.000 raspberry_pi: temp=35.2 mcu_temp: temp=23.3  sysload=0.24 cputime=22.614 memavail=723376 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=125.3 pwm=1.000
Stats 346.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=9075 bytes_read=29103 bytes_retransmit=9 bytes_invalid=0 send_seq=613 receive_seq=613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 heater_bed: target=60 temp=37.0 pwm=1.000 raspberry_pi: temp=35.0 mcu_temp: temp=23.3  sysload=0.22 cputime=22.652 memavail=723376 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=127.0 pwm=1.000
Stats 347.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=9128 bytes_read=29285 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 heater_bed: target=60 temp=37.4 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.3  sysload=0.22 cputime=22.689 memavail=723628 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=128.8 pwm=1.000
Stats 348.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=9181 bytes_read=29478 bytes_retransmit=9 bytes_invalid=0 send_seq=623 receive_seq=623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997017 heater_bed: target=60 temp=37.6 pwm=1.000 raspberry_pi: temp=34.9 mcu_temp: temp=23.4  sysload=0.22 cputime=22.727 memavail=723696 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=131.1 pwm=1.000
Stats 349.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=9240 bytes_read=29643 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997028 heater_bed: target=60 temp=37.8 pwm=1.000 raspberry_pi: temp=35.8 mcu_temp: temp=23.3  sysload=0.22 cputime=22.764 memavail=723024 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=132.8 pwm=1.000
Stats 350.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=9306 bytes_read=29838 bytes_retransmit=9 bytes_invalid=0 send_seq=633 receive_seq=633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997034 heater_bed: target=60 temp=38.2 pwm=1.000 raspberry_pi: temp=34.9 mcu_temp: temp=23.3  sysload=0.22 cputime=22.803 memavail=723276 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=134.6 pwm=1.000
Stats 351.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=9350 bytes_read=30031 bytes_retransmit=9 bytes_invalid=0 send_seq=638 receive_seq=638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997044 heater_bed: target=60 temp=38.4 pwm=1.000 raspberry_pi: temp=34.6 mcu_temp: temp=23.3  sysload=0.20 cputime=22.842 memavail=723276 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=136.8 pwm=1.000
Stats 352.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=9403 bytes_read=30196 bytes_retransmit=9 bytes_invalid=0 send_seq=643 receive_seq=643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997043 heater_bed: target=60 temp=38.7 pwm=1.000 raspberry_pi: temp=35.2 mcu_temp: temp=23.2  sysload=0.20 cputime=22.879 memavail=722976 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=138.5 pwm=1.000
Stats 353.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=9456 bytes_read=30376 bytes_retransmit=9 bytes_invalid=0 send_seq=648 receive_seq=648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997041 heater_bed: target=60 temp=39.0 pwm=1.000 raspberry_pi: temp=35.5 mcu_temp: temp=23.2  sysload=0.20 cputime=22.917 memavail=723104 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=140.2 pwm=1.000
Stats 354.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=9538 bytes_read=30574 bytes_retransmit=9 bytes_invalid=0 send_seq=654 receive_seq=654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997039 heater_bed: target=60 temp=39.2 pwm=1.000 raspberry_pi: temp=35.6 mcu_temp: temp=23.4  sysload=0.20 cputime=22.956 memavail=722688 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=142.4 pwm=1.000
Stats 355.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=9591 bytes_read=30754 bytes_retransmit=9 bytes_invalid=0 send_seq=659 receive_seq=659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997038 heater_bed: target=60 temp=39.4 pwm=1.000 raspberry_pi: temp=35.6 mcu_temp: temp=23.4  sysload=0.20 cputime=22.993 memavail=722940 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=144.0 pwm=1.000
Stats 356.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=9644 bytes_read=30934 bytes_retransmit=9 bytes_invalid=0 send_seq=664 receive_seq=664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997036 heater_bed: target=60 temp=39.8 pwm=1.000 raspberry_pi: temp=35.4 mcu_temp: temp=23.4  sysload=0.19 cputime=23.030 memavail=722940 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=145.6 pwm=1.000
Stats 357.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=9699 bytes_read=31127 bytes_retransmit=9 bytes_invalid=0 send_seq=669 receive_seq=669 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997034 heater_bed: target=60 temp=40.0 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.4  sysload=0.19 cputime=23.067 memavail=722436 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=147.7 pwm=1.000
Stats 358.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=9784 bytes_read=31302 bytes_retransmit=9 bytes_invalid=0 send_seq=676 receive_seq=676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997033 heater_bed: target=60 temp=40.2 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.5  sysload=0.19 cputime=23.104 memavail=722436 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=149.3 pwm=1.000
Stats 359.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=9818 bytes_read=31472 bytes_retransmit=9 bytes_invalid=0 send_seq=679 receive_seq=679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997031 heater_bed: target=60 temp=40.5 pwm=1.000 raspberry_pi: temp=35.5 mcu_temp: temp=23.3  sysload=0.19 cputime=23.141 memavail=721180 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=150.8 pwm=1.000
Stats 360.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=9877 bytes_read=31680 bytes_retransmit=9 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997029 heater_bed: target=60 temp=40.8 pwm=1.000 raspberry_pi: temp=35.3 mcu_temp: temp=23.5  sysload=0.19 cputime=23.179 memavail=721228 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=153.0 pwm=1.000
Stats 361.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=9930 bytes_read=31845 bytes_retransmit=9 bytes_invalid=0 send_seq=689 receive_seq=689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997025 heater_bed: target=60 temp=41.0 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.6  sysload=0.17 cputime=23.216 memavail=720976 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=154.5 pwm=1.000
Stats 362.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=9996 bytes_read=32014 bytes_retransmit=9 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=60 temp=41.3 pwm=1.000 raspberry_pi: temp=35.7 mcu_temp: temp=23.5  sysload=0.17 cputime=23.253 memavail=720976 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=156.0 pwm=1.000
Stats 363.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10049 bytes_read=32200 bytes_retransmit=9 bytes_invalid=0 send_seq=699 receive_seq=699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=60 temp=41.6 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.6  sysload=0.17 cputime=23.291 memavail=720976 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=158.1 pwm=1.000
Stats 364.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10106 bytes_read=32365 bytes_retransmit=9 bytes_invalid=0 send_seq=704 receive_seq=704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=60 temp=41.8 pwm=1.000 raspberry_pi: temp=35.2 mcu_temp: temp=23.5  sysload=0.17 cputime=23.328 memavail=720376 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=159.6 pwm=1.000
Stats 365.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=10140 bytes_read=32550 bytes_retransmit=9 bytes_invalid=0 send_seq=707 receive_seq=707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997028 heater_bed: target=60 temp=42.1 pwm=1.000 raspberry_pi: temp=35.3 mcu_temp: temp=23.4  sysload=0.17 cputime=23.365 memavail=720132 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=161.1 pwm=1.000
Stats 366.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=10211 bytes_read=32748 bytes_retransmit=9 bytes_invalid=0 send_seq=713 receive_seq=713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997026 heater_bed: target=60 temp=42.3 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.7  sysload=0.16 cputime=23.404 memavail=719828 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=163.1 pwm=1.000
Stats 367.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=10280 bytes_read=32918 bytes_retransmit=9 bytes_invalid=0 send_seq=719 receive_seq=719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=60 temp=42.5 pwm=1.000 raspberry_pi: temp=35.7 mcu_temp: temp=23.5  sysload=0.16 cputime=23.440 memavail=719628 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=164.6 pwm=1.000
Stats 368.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=10328 bytes_read=33098 bytes_retransmit=9 bytes_invalid=0 send_seq=724 receive_seq=724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=60 temp=42.9 pwm=1.000 raspberry_pi: temp=35.5 mcu_temp: temp=23.7  sysload=0.16 cputime=23.478 memavail=719376 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=166.1 pwm=1.000
Stats 369.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=10381 bytes_read=33291 bytes_retransmit=9 bytes_invalid=0 send_seq=729 receive_seq=729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=60 temp=43.1 pwm=1.000 raspberry_pi: temp=35.7 mcu_temp: temp=23.5  sysload=0.16 cputime=23.516 memavail=719380 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=168.0 pwm=1.000
Stats 370.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10434 bytes_read=33471 bytes_retransmit=9 bytes_invalid=0 send_seq=734 receive_seq=734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=60 temp=43.3 pwm=1.000 raspberry_pi: temp=36.0 mcu_temp: temp=23.8  sysload=0.16 cputime=23.555 memavail=719132 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=169.4 pwm=1.000
Stats 371.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10505 bytes_read=33656 bytes_retransmit=9 bytes_invalid=0 send_seq=740 receive_seq=740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=60 temp=43.6 pwm=1.000 raspberry_pi: temp=35.9 mcu_temp: temp=23.5  sysload=0.14 cputime=23.594 memavail=719384 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=170.9 pwm=1.000
Stats 372.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10570 bytes_read=33865 bytes_retransmit=9 bytes_invalid=0 send_seq=746 receive_seq=746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=60 temp=43.9 pwm=1.000 raspberry_pi: temp=35.7 mcu_temp: temp=23.8  sysload=0.14 cputime=23.632 memavail=719384 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=172.8 pwm=1.000
Stats 373.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10623 bytes_read=34030 bytes_retransmit=9 bytes_invalid=0 send_seq=751 receive_seq=751 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=60 temp=44.1 pwm=1.000 raspberry_pi: temp=35.5 mcu_temp: temp=23.5  sysload=0.14 cputime=23.669 memavail=719896 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=174.2 pwm=1.000
Stats 374.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10667 bytes_read=34210 bytes_retransmit=9 bytes_invalid=0 send_seq=756 receive_seq=756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=60 temp=44.4 pwm=1.000 raspberry_pi: temp=35.1 mcu_temp: temp=23.7  sysload=0.14 cputime=23.705 memavail=719896 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=175.6 pwm=1.000
Stats 375.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10752 bytes_read=34428 bytes_retransmit=9 bytes_invalid=0 send_seq=763 receive_seq=763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=60 temp=44.6 pwm=1.000 raspberry_pi: temp=36.0 mcu_temp: temp=23.5  sysload=0.14 cputime=23.745 memavail=720156 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=177.4 pwm=1.000
Stats 376.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10790 bytes_read=34583 bytes_retransmit=9 bytes_invalid=0 send_seq=766 receive_seq=766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=60 temp=44.8 pwm=1.000 raspberry_pi: temp=36.1 mcu_temp: temp=23.8  sysload=0.13 cputime=23.780 memavail=720156 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.8 pwm=1.000
Stats 377.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10843 bytes_read=34763 bytes_retransmit=9 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997030 heater_bed: target=60 temp=45.1 pwm=1.000 raspberry_pi: temp=35.7 mcu_temp: temp=23.8  sysload=0.13 cputime=23.818 memavail=719656 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.1 pwm=1.000
Stats 378.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10889 bytes_read=34956 bytes_retransmit=9 bytes_invalid=0 send_seq=776 receive_seq=776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997028 heater_bed: target=60 temp=45.3 pwm=1.000 raspberry_pi: temp=35.9 mcu_temp: temp=23.9  sysload=0.13 cputime=23.855 memavail=719908 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.9 pwm=1.000
Stats 379.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10974 bytes_read=35131 bytes_retransmit=9 bytes_invalid=0 send_seq=783 receive_seq=783 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=60 temp=45.5 pwm=1.000 raspberry_pi: temp=35.5 mcu_temp: temp=23.8  sysload=0.13 cputime=23.894 memavail=720440 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.3 pwm=1.000
Stats 380.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=11022 bytes_read=35326 bytes_retransmit=9 bytes_invalid=0 send_seq=788 receive_seq=788 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=60 temp=45.8 pwm=1.000 raspberry_pi: temp=35.9 mcu_temp: temp=24.0  sysload=0.13 cputime=23.932 memavail=719944 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.6 pwm=1.000
Stats 381.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=11075 bytes_read=35519 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997033 heater_bed: target=60 temp=46.0 pwm=1.000 raspberry_pi: temp=36.3 mcu_temp: temp=23.9  sysload=0.12 cputime=23.971 memavail=720196 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=186.3 pwm=1.000
Stats 382.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=11125 bytes_read=35679 bytes_retransmit=9 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997045 heater_bed: target=60 temp=46.2 pwm=1.000 raspberry_pi: temp=36.6 mcu_temp: temp=23.9  sysload=0.12 cputime=24.008 memavail=719944 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.6 pwm=0.933
Stats 383.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=11196 bytes_read=35864 bytes_retransmit=9 bytes_invalid=0 send_seq=803 receive_seq=803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997043 heater_bed: target=60 temp=46.5 pwm=1.000 raspberry_pi: temp=36.0 mcu_temp: temp=23.9  sysload=0.12 cputime=24.047 memavail=719440 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=188.9 pwm=0.858
Stats 384.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=11265 bytes_read=36062 bytes_retransmit=9 bytes_invalid=0 send_seq=809 receive_seq=809 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997053 heater_bed: target=60 temp=46.7 pwm=1.000 raspberry_pi: temp=36.2 mcu_temp: temp=24.0  sysload=0.12 cputime=24.086 memavail=719440 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.6 pwm=0.711
Stats 385.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11352 bytes_read=36252 bytes_retransmit=9 bytes_invalid=0 send_seq=816 receive_seq=816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997049 heater_bed: target=60 temp=47.0 pwm=1.000 raspberry_pi: temp=36.3 mcu_temp: temp=24.0  sysload=0.12 cputime=24.127 memavail=719952 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.8 pwm=0.651
Stats 386.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11416 bytes_read=36432 bytes_retransmit=9 bytes_invalid=0 send_seq=821 receive_seq=821 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997049 heater_bed: target=60 temp=47.3 pwm=1.000 raspberry_pi: temp=36.4 mcu_temp: temp=24.0  sysload=0.11 cputime=24.168 memavail=719836 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.0 pwm=0.580
Stats 387.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11466 bytes_read=36615 bytes_retransmit=9 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997044 heater_bed: target=60 temp=47.4 pwm=1.000 raspberry_pi: temp=36.1 mcu_temp: temp=23.8  sysload=0.11 cputime=24.206 memavail=719588 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.4 pwm=0.580
Stats 388.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11505 bytes_read=36765 bytes_retransmit=9 bytes_invalid=0 send_seq=829 receive_seq=829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997042 heater_bed: target=60 temp=47.7 pwm=1.000 raspberry_pi: temp=36.0 mcu_temp: temp=24.0  sysload=0.11 cputime=24.244 memavail=719536 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.3 pwm=0.580
Heater extruder within range of 200.000
Stats 389.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11574 bytes_read=36947 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997046 heater_bed: target=60 temp=48.0 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=24.0  sysload=0.11 cputime=24.284 memavail=719840 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.1 pwm=0.520
Stats 390.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=11618 bytes_read=37155 bytes_retransmit=9 bytes_invalid=0 send_seq=840 receive_seq=840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997044 heater_bed: target=60 temp=48.2 pwm=1.000 raspberry_pi: temp=36.7 mcu_temp: temp=24.0  sysload=0.11 cputime=24.323 memavail=719588 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.0 pwm=0.520
Stats 391.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=11652 bytes_read=37310 bytes_retransmit=9 bytes_invalid=0 send_seq=843 receive_seq=843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997043 heater_bed: target=60 temp=48.4 pwm=1.000 raspberry_pi: temp=36.7 mcu_temp: temp=24.2  sysload=0.18 cputime=24.363 memavail=719596 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.6 pwm=0.520
Stats 392.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=11693 bytes_read=37485 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997040 heater_bed: target=60 temp=48.6 pwm=1.000 raspberry_pi: temp=36.9 mcu_temp: temp=24.1  sysload=0.18 cputime=24.400 memavail=719096 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.0 pwm=0.520
Stats 393.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=11816 bytes_read=37683 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997036 heater_bed: target=60 temp=48.9 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=24.2  sysload=0.18 cputime=24.441 memavail=719376 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.6 pwm=0.511
Stats 394.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=11867 bytes_read=37843 bytes_retransmit=9 bytes_invalid=0 send_seq=857 receive_seq=857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997033 heater_bed: target=60 temp=49.1 pwm=1.000 raspberry_pi: temp=35.9 mcu_temp: temp=24.2  sysload=0.18 cputime=24.478 memavail=718872 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.0 pwm=0.511
Stats 395.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000067 bytes_write=11892 bytes_read=38028 bytes_retransmit=9 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997032 heater_bed: target=60 temp=49.3 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=24.3  sysload=0.18 cputime=24.520 memavail=718624 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.511
Stats 396.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000067 bytes_write=11933 bytes_read=38216 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997029 heater_bed: target=60 temp=49.5 pwm=1.000 raspberry_pi: temp=36.1 mcu_temp: temp=24.2  sysload=0.17 cputime=24.558 memavail=718632 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.511
Stats 397.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000067 bytes_write=11973 bytes_read=38371 bytes_retransmit=9 bytes_invalid=0 send_seq=867 receive_seq=867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997029 heater_bed: target=60 temp=49.7 pwm=1.000 raspberry_pi: temp=36.2 mcu_temp: temp=24.2  sysload=0.17 cputime=24.596 memavail=718864 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.511
Stats 398.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000067 bytes_write=12014 bytes_read=38546 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=60 temp=50.0 pwm=1.000 raspberry_pi: temp=36.2 mcu_temp: temp=24.4  sysload=0.17 cputime=24.633 memavail=719176 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.491
Stats 399.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000067 bytes_write=12039 bytes_read=38729 bytes_retransmit=9 bytes_invalid=0 send_seq=874 receive_seq=874 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997025 heater_bed: target=60 temp=50.2 pwm=1.000 raspberry_pi: temp=36.0 mcu_temp: temp=24.2  sysload=0.17 cputime=24.670 memavail=718508 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.491
Stats 400.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=12080 bytes_read=38904 bytes_retransmit=9 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997025 heater_bed: target=60 temp=50.4 pwm=1.000 raspberry_pi: temp=36.4 mcu_temp: temp=24.3  sysload=0.17 cputime=24.708 memavail=718552 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.491
Stats 401.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=12105 bytes_read=39074 bytes_retransmit=9 bytes_invalid=0 send_seq=881 receive_seq=881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997025 heater_bed: target=60 temp=50.7 pwm=1.000 raspberry_pi: temp=36.5 mcu_temp: temp=24.2  sysload=0.15 cputime=24.744 memavail=718552 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.491
Stats 402.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=12165 bytes_read=39272 bytes_retransmit=9 bytes_invalid=0 send_seq=887 receive_seq=887 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=60 temp=50.9 pwm=1.000 raspberry_pi: temp=35.8 mcu_temp: temp=24.3  sysload=0.15 cputime=24.780 memavail=719056 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.491
Stats 403.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=12190 bytes_read=39427 bytes_retransmit=9 bytes_invalid=0 send_seq=890 receive_seq=890 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=60 temp=51.1 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=24.2  sysload=0.15 cputime=24.811 memavail=719056 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.491
Stats 404.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=12240 bytes_read=39602 bytes_retransmit=9 bytes_invalid=0 send_seq=894 receive_seq=894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997021 heater_bed: target=60 temp=51.4 pwm=1.000 raspberry_pi: temp=35.9 mcu_temp: temp=24.4  sysload=0.15 cputime=24.843 memavail=719812 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.491
Stats 405.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12265 bytes_read=39800 bytes_retransmit=9 bytes_invalid=0 send_seq=897 receive_seq=897 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997026 heater_bed: target=60 temp=51.6 pwm=1.000 raspberry_pi: temp=36.3 mcu_temp: temp=24.3  sysload=0.15 cputime=24.877 memavail=719560 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.491
Stats 406.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12310 bytes_read=39960 bytes_retransmit=9 bytes_invalid=0 send_seq=901 receive_seq=901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=60 temp=51.8 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=24.4  sysload=0.14 cputime=24.909 memavail=719768 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.497
Stats 407.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12335 bytes_read=40144 bytes_retransmit=9 bytes_invalid=0 send_seq=904 receive_seq=904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997022 heater_bed: target=60 temp=52.1 pwm=1.000 raspberry_pi: temp=36.6 mcu_temp: temp=24.2  sysload=0.14 cputime=24.942 memavail=719516 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.497
Stats 408.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12376 bytes_read=40318 bytes_retransmit=9 bytes_invalid=0 send_seq=908 receive_seq=908 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997021 heater_bed: target=60 temp=52.3 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=24.4  sysload=0.14 cputime=24.974 memavail=719596 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.497
Stats 409.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12396 bytes_read=40468 bytes_retransmit=9 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997019 heater_bed: target=60 temp=52.5 pwm=1.000 raspberry_pi: temp=36.4 mcu_temp: temp=24.4  sysload=0.14 cputime=25.006 memavail=718900 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.497
Stats 410.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=12432 bytes_read=40667 bytes_retransmit=9 bytes_invalid=0 send_seq=913 receive_seq=913 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997017 heater_bed: target=60 temp=52.7 pwm=1.000 raspberry_pi: temp=36.6 mcu_temp: temp=24.3  sysload=0.14 cputime=25.038 memavail=718648 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.466
Stats 411.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=12476 bytes_read=40846 bytes_retransmit=9 bytes_invalid=0 send_seq=918 receive_seq=918 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997016 heater_bed: target=60 temp=52.9 pwm=1.000 raspberry_pi: temp=36.4 mcu_temp: temp=24.6  sysload=0.13 cputime=25.071 memavail=718912 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.466
Stats 412.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=12501 bytes_read=41001 bytes_retransmit=9 bytes_invalid=0 send_seq=921 receive_seq=921 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=60 temp=53.1 pwm=1.000 raspberry_pi: temp=36.6 mcu_temp: temp=24.6  sysload=0.13 cputime=25.103 memavail=718912 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.466
Stats 413.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=12542 bytes_read=41181 bytes_retransmit=9 bytes_invalid=0 send_seq=925 receive_seq=925 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=60 temp=53.3 pwm=1.000 raspberry_pi: temp=36.5 mcu_temp: temp=24.6  sysload=0.13 cputime=25.137 memavail=718660 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.466
Stats 414.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=12583 bytes_read=41347 bytes_retransmit=9 bytes_invalid=0 send_seq=929 receive_seq=929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=60 temp=53.6 pwm=1.000 raspberry_pi: temp=36.5 mcu_temp: temp=24.4  sysload=0.13 cputime=25.170 memavail=718664 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.485
Stats 415.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12612 bytes_read=41517 bytes_retransmit=9 bytes_invalid=0 send_seq=932 receive_seq=932 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997022 heater_bed: target=60 temp=53.8 pwm=1.000 raspberry_pi: temp=36.4 mcu_temp: temp=24.6  sysload=0.13 cputime=25.202 memavail=718576 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.485
Stats 416.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12646 bytes_read=41701 bytes_retransmit=9 bytes_invalid=0 send_seq=935 receive_seq=935 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997021 heater_bed: target=60 temp=54.0 pwm=1.000 raspberry_pi: temp=36.4 mcu_temp: temp=24.5  sysload=0.12 cputime=25.235 memavail=718180 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.485
Stats 417.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12682 bytes_read=41870 bytes_retransmit=9 bytes_invalid=0 send_seq=938 receive_seq=938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=60 temp=54.2 pwm=0.991 raspberry_pi: temp=36.3 mcu_temp: temp=24.5  sysload=0.12 cputime=25.267 memavail=718684 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.485
Stats 418.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12707 bytes_read=42025 bytes_retransmit=9 bytes_invalid=0 send_seq=941 receive_seq=941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 heater_bed: target=60 temp=54.4 pwm=0.991 raspberry_pi: temp=36.8 mcu_temp: temp=24.7  sysload=0.12 cputime=25.299 memavail=718432 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.485
Stats 419.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12796 bytes_read=42229 bytes_retransmit=9 bytes_invalid=0 send_seq=948 receive_seq=948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=60 temp=54.7 pwm=0.905 raspberry_pi: temp=36.5 mcu_temp: temp=24.7  sysload=0.12 cputime=25.333 memavail=718740 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.499
Stats 420.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=12856 bytes_read=42428 bytes_retransmit=9 bytes_invalid=0 send_seq=954 receive_seq=954 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=60 temp=54.8 pwm=0.905 raspberry_pi: temp=36.7 mcu_temp: temp=24.8  sysload=0.12 cputime=25.366 memavail=718488 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.556
Stats 421.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=12940 bytes_read=42598 bytes_retransmit=9 bytes_invalid=0 send_seq=960 receive_seq=960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=55.0 pwm=0.986 raspberry_pi: temp=36.6 mcu_temp: temp=24.6  sysload=0.43 cputime=25.402 memavail=718524 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.615
Heater heater_bed within range of 60.000
Stats 422.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=12997 bytes_read=42792 bytes_retransmit=9 bytes_invalid=0 send_seq=965 receive_seq=965 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=60 temp=55.2 pwm=0.990 raspberry_pi: temp=36.7 mcu_temp: temp=24.9  sysload=0.43 cputime=25.437 memavail=718272 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.615
Stats 423.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=13038 bytes_read=42966 bytes_retransmit=9 bytes_invalid=0 send_seq=969 receive_seq=969 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=60 temp=55.4 pwm=0.887 raspberry_pi: temp=36.1 mcu_temp: temp=24.7  sysload=0.43 cputime=25.469 memavail=718860 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.615
Stats 424.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=13063 bytes_read=43121 bytes_retransmit=9 bytes_invalid=0 send_seq=972 receive_seq=972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997009 heater_bed: target=60 temp=55.6 pwm=0.887 raspberry_pi: temp=36.0 mcu_temp: temp=24.8  sysload=0.43 cputime=25.501 memavail=718100 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.615
Stats 425.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13150 bytes_read=43340 bytes_retransmit=9 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=60 temp=55.8 pwm=0.888 raspberry_pi: temp=36.7 mcu_temp: temp=24.8  sysload=0.43 cputime=25.536 memavail=718156 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.588
Stats 426.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13175 bytes_read=43509 bytes_retransmit=9 bytes_invalid=0 send_seq=982 receive_seq=982 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=60 temp=55.9 pwm=0.888 raspberry_pi: temp=36.2 mcu_temp: temp=24.7  sysload=0.56 cputime=25.567 memavail=718168 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.588
Stats 427.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13259 bytes_read=43679 bytes_retransmit=9 bytes_invalid=0 send_seq=988 receive_seq=988 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=60 temp=56.1 pwm=0.864 raspberry_pi: temp=36.1 mcu_temp: temp=24.6  sysload=0.56 cputime=25.601 memavail=718168 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.516
Stats 428.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13316 bytes_read=43873 bytes_retransmit=9 bytes_invalid=0 send_seq=993 receive_seq=993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=56.3 pwm=0.837 raspberry_pi: temp=36.4 mcu_temp: temp=24.9  sysload=0.56 cputime=25.634 memavail=717944 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.516
Stats 429.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13357 bytes_read=44047 bytes_retransmit=9 bytes_invalid=0 send_seq=997 receive_seq=997 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=60 temp=56.4 pwm=0.837 raspberry_pi: temp=36.4 mcu_temp: temp=24.6  sysload=0.56 cputime=25.667 memavail=718492 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.435
Stats 430.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=13398 bytes_read=44222 bytes_retransmit=9 bytes_invalid=0 send_seq=1001 receive_seq=1001 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=60 temp=56.6 pwm=0.891 raspberry_pi: temp=36.8 mcu_temp: temp=24.7  sysload=0.56 cputime=25.699 memavail=718772 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.435
Stats 431.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=13454 bytes_read=44411 bytes_retransmit=9 bytes_invalid=0 send_seq=1005 receive_seq=1005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=60 temp=56.8 pwm=0.849 raspberry_pi: temp=36.4 mcu_temp: temp=24.8  sysload=0.51 cputime=25.732 memavail=719404 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.435
Stats 432.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=13490 bytes_read=44580 bytes_retransmit=9 bytes_invalid=0 send_seq=1008 receive_seq=1008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=56.9 pwm=0.794 raspberry_pi: temp=36.4 mcu_temp: temp=24.9  sysload=0.51 cputime=25.765 memavail=719416 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.435
Stats 433.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=13531 bytes_read=44740 bytes_retransmit=9 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=57.1 pwm=0.737 raspberry_pi: temp=36.9 mcu_temp: temp=24.7  sysload=0.51 cputime=25.797 memavail=720256 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.435
Stats 434.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=13610 bytes_read=44955 bytes_retransmit=9 bytes_invalid=0 send_seq=1019 receive_seq=1019 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=57.2 pwm=0.825 raspberry_pi: temp=36.5 mcu_temp: temp=24.8  sysload=0.51 cputime=25.832 memavail=720052 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.430
Stats 435.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=13662 bytes_read=45144 bytes_retransmit=9 bytes_invalid=0 send_seq=1023 receive_seq=1023 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=60 temp=57.3 pwm=0.757 raspberry_pi: temp=37.3 mcu_temp: temp=24.9  sysload=0.51 cputime=25.865 memavail=720052 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.491
Stats 436.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=13687 bytes_read=45299 bytes_retransmit=9 bytes_invalid=0 send_seq=1026 receive_seq=1026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=60 temp=57.5 pwm=0.757 raspberry_pi: temp=36.0 mcu_temp: temp=24.9  sysload=0.47 cputime=25.899 memavail=720060 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.491
Stats 437.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=13744 bytes_read=45493 bytes_retransmit=9 bytes_invalid=0 send_seq=1031 receive_seq=1031 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=60 temp=57.6 pwm=0.769 raspberry_pi: temp=36.7 mcu_temp: temp=24.7  sysload=0.47 cputime=25.931 memavail=720388 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.491
Stats 438.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=13773 bytes_read=45659 bytes_retransmit=9 bytes_invalid=0 send_seq=1034 receive_seq=1034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=57.7 pwm=0.769 raspberry_pi: temp=36.6 mcu_temp: temp=24.8  sysload=0.47 cputime=25.963 memavail=720640 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.491
Stats 439.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=13814 bytes_read=45809 bytes_retransmit=9 bytes_invalid=0 send_seq=1038 receive_seq=1038 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997002 heater_bed: target=60 temp=57.9 pwm=0.714 raspberry_pi: temp=36.5 mcu_temp: temp=24.9  sysload=0.47 cputime=25.995 memavail=720640 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.491
Stats 440.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13855 bytes_read=46010 bytes_retransmit=9 bytes_invalid=0 send_seq=1042 receive_seq=1042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997002 heater_bed: target=60 temp=58.0 pwm=0.714 raspberry_pi: temp=36.8 mcu_temp: temp=24.8  sysload=0.47 cputime=26.028 memavail=720924 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.497
Stats 441.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13896 bytes_read=46184 bytes_retransmit=9 bytes_invalid=0 send_seq=1046 receive_seq=1046 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997001 heater_bed: target=60 temp=58.1 pwm=0.768 raspberry_pi: temp=36.8 mcu_temp: temp=24.9  sysload=0.43 cputime=26.060 memavail=721240 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.497
Stats 442.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13989 bytes_read=46344 bytes_retransmit=9 bytes_invalid=0 send_seq=1050 receive_seq=1050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=58.2 pwm=0.768 raspberry_pi: temp=36.7 mcu_temp: temp=25.0  sysload=0.43 cputime=26.092 memavail=721948 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.497
Stats 443.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14031 bytes_read=46533 bytes_retransmit=9 bytes_invalid=0 send_seq=1054 receive_seq=1054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=58.3 pwm=0.668 raspberry_pi: temp=37.4 mcu_temp: temp=25.0  sysload=0.43 cputime=26.125 memavail=722308 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.497
Stats 444.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14136 bytes_read=46727 bytes_retransmit=9 bytes_invalid=0 send_seq=1062 receive_seq=1062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=58.4 pwm=0.688 raspberry_pi: temp=36.3 mcu_temp: temp=25.2  sysload=0.43 cputime=26.159 memavail=722136 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.466
Stats 445.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=14161 bytes_read=46897 bytes_retransmit=9 bytes_invalid=0 send_seq=1065 receive_seq=1065 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=58.5 pwm=0.688 raspberry_pi: temp=37.1 mcu_temp: temp=25.2  sysload=0.43 cputime=26.190 memavail=722388 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.466
Stats 446.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=14253 bytes_read=47106 bytes_retransmit=9 bytes_invalid=0 send_seq=1073 receive_seq=1073 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=58.7 pwm=0.614 raspberry_pi: temp=37.2 mcu_temp: temp=25.0  sysload=0.40 cputime=26.229 memavail=722388 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.475
Stats 447.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=14326 bytes_read=47290 bytes_retransmit=9 bytes_invalid=0 send_seq=1079 receive_seq=1079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=58.7 pwm=0.746 raspberry_pi: temp=36.8 mcu_temp: temp=25.1  sysload=0.40 cputime=26.262 memavail=722900 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.475
Stats 448.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=14367 bytes_read=47450 bytes_retransmit=9 bytes_invalid=0 send_seq=1083 receive_seq=1083 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=58.8 pwm=0.649 raspberry_pi: temp=37.2 mcu_temp: temp=25.0  sysload=0.40 cputime=26.294 memavail=722904 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.475
Stats 449.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=14408 bytes_read=47639 bytes_retransmit=9 bytes_invalid=0 send_seq=1087 receive_seq=1087 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997002 heater_bed: target=60 temp=58.9 pwm=0.706 raspberry_pi: temp=36.9 mcu_temp: temp=25.1  sysload=0.40 cputime=26.327 memavail=723160 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.475
Stats 450.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14465 bytes_read=47833 bytes_retransmit=9 bytes_invalid=0 send_seq=1092 receive_seq=1092 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997002 heater_bed: target=60 temp=59.0 pwm=0.647 raspberry_pi: temp=37.6 mcu_temp: temp=25.0  sysload=0.40 cputime=26.359 memavail=723360 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 451.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14490 bytes_read=47988 bytes_retransmit=9 bytes_invalid=0 send_seq=1095 receive_seq=1095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=59.1 pwm=0.647 raspberry_pi: temp=36.8 mcu_temp: temp=25.4  sysload=0.37 cputime=26.390 memavail=723160 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 452.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14531 bytes_read=48177 bytes_retransmit=9 bytes_invalid=0 send_seq=1099 receive_seq=1099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997001 heater_bed: target=60 temp=59.2 pwm=0.593 raspberry_pi: temp=36.5 mcu_temp: temp=25.2  sysload=0.37 cputime=26.423 memavail=723420 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 453.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14588 bytes_read=48356 bytes_retransmit=9 bytes_invalid=0 send_seq=1104 receive_seq=1104 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997001 heater_bed: target=60 temp=59.3 pwm=0.581 raspberry_pi: temp=37.5 mcu_temp: temp=25.2  sysload=0.37 cputime=26.456 memavail=723672 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 454.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14629 bytes_read=48516 bytes_retransmit=9 bytes_invalid=0 send_seq=1108 receive_seq=1108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997001 heater_bed: target=60 temp=59.3 pwm=0.661 raspberry_pi: temp=36.7 mcu_temp: temp=25.2  sysload=0.37 cputime=26.488 memavail=724176 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 455.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14702 bytes_read=48730 bytes_retransmit=9 bytes_invalid=0 send_seq=1114 receive_seq=1114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=59.4 pwm=0.530 raspberry_pi: temp=36.8 mcu_temp: temp=25.3  sysload=0.37 cputime=26.522 memavail=724680 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.492
Stats 456.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14743 bytes_read=48904 bytes_retransmit=9 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=60 temp=59.5 pwm=0.652 raspberry_pi: temp=37.2 mcu_temp: temp=25.0  sysload=0.34 cputime=26.554 memavail=723928 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.492
Stats 457.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14784 bytes_read=49064 bytes_retransmit=9 bytes_invalid=0 send_seq=1122 receive_seq=1122 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=60 temp=59.6 pwm=0.534 raspberry_pi: temp=36.9 mcu_temp: temp=25.2  sysload=0.34 cputime=26.586 memavail=723684 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.492
Stats 458.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14845 bytes_read=49258 bytes_retransmit=9 bytes_invalid=0 send_seq=1127 receive_seq=1127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=60 temp=59.6 pwm=0.583 raspberry_pi: temp=37.4 mcu_temp: temp=25.1  sysload=0.34 cputime=26.620 memavail=723208 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.492
Stats 459.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14897 bytes_read=49432 bytes_retransmit=9 bytes_invalid=0 send_seq=1131 receive_seq=1131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=60 temp=59.7 pwm=0.489 raspberry_pi: temp=37.2 mcu_temp: temp=25.3  sysload=0.34 cputime=26.653 memavail=723008 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.496
Stats 460.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14922 bytes_read=49602 bytes_retransmit=9 bytes_invalid=0 send_seq=1134 receive_seq=1134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=59.7 pwm=0.489 raspberry_pi: temp=37.0 mcu_temp: temp=25.3  sysload=0.34 cputime=26.684 memavail=722756 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.496
Stats 461.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14979 bytes_read=49796 bytes_retransmit=9 bytes_invalid=0 send_seq=1139 receive_seq=1139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=60 temp=59.8 pwm=0.572 raspberry_pi: temp=37.1 mcu_temp: temp=25.2  sysload=0.31 cputime=26.717 memavail=723020 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.496
Stats 462.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=15036 bytes_read=49975 bytes_retransmit=9 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=59.8 pwm=0.570 raspberry_pi: temp=37.2 mcu_temp: temp=25.3  sysload=0.31 cputime=26.751 memavail=722552 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.496
Stats 463.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=15104 bytes_read=50140 bytes_retransmit=9 bytes_invalid=0 send_seq=1149 receive_seq=1149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997013 heater_bed: target=60 temp=59.9 pwm=0.582 raspberry_pi: temp=37.6 mcu_temp: temp=25.3  sysload=0.31 cputime=26.784 memavail=722804 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.491
Stats 464.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=15172 bytes_read=50325 bytes_retransmit=9 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=59.9 pwm=0.563 raspberry_pi: temp=37.7 mcu_temp: temp=25.3  sysload=0.31 cputime=26.818 memavail=722580 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.491
Stats 465.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15229 bytes_read=50510 bytes_retransmit=9 bytes_invalid=0 send_seq=1159 receive_seq=1159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=60.0 pwm=0.580 raspberry_pi: temp=38.1 mcu_temp: temp=25.3  sysload=0.31 cputime=26.853 memavail=722584 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.491
Stats 466.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15270 bytes_read=50670 bytes_retransmit=9 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=60.0 pwm=0.488 raspberry_pi: temp=37.5 mcu_temp: temp=25.4  sysload=0.28 cputime=26.884 memavail=722584 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.491
Stats 467.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15354 bytes_read=50869 bytes_retransmit=9 bytes_invalid=0 send_seq=1169 receive_seq=1169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=60 temp=60.1 pwm=0.404 raspberry_pi: temp=37.1 mcu_temp: temp=25.5  sysload=0.28 cputime=26.919 memavail=722088 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 468.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15395 bytes_read=51043 bytes_retransmit=9 bytes_invalid=0 send_seq=1173 receive_seq=1173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997009 heater_bed: target=60 temp=60.1 pwm=0.560 raspberry_pi: temp=36.7 mcu_temp: temp=25.4  sysload=0.28 cputime=26.951 memavail=721624 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 469.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15431 bytes_read=51198 bytes_retransmit=9 bytes_invalid=0 send_seq=1176 receive_seq=1176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997009 heater_bed: target=60 temp=60.2 pwm=0.485 raspberry_pi: temp=36.8 mcu_temp: temp=25.6  sysload=0.28 cputime=26.983 memavail=722064 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 470.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15499 bytes_read=51407 bytes_retransmit=9 bytes_invalid=0 send_seq=1181 receive_seq=1181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=60 temp=60.2 pwm=0.445 raspberry_pi: temp=37.2 mcu_temp: temp=25.4  sysload=0.28 cputime=27.017 memavail=722352 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 471.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15588 bytes_read=51596 bytes_retransmit=9 bytes_invalid=0 send_seq=1188 receive_seq=1188 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=60 temp=60.2 pwm=0.549 raspberry_pi: temp=37.2 mcu_temp: temp=25.6  sysload=0.34 cputime=27.050 memavail=722100 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 472.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15645 bytes_read=51761 bytes_retransmit=9 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997002 heater_bed: target=60 temp=60.3 pwm=0.520 raspberry_pi: temp=37.0 mcu_temp: temp=25.5  sysload=0.34 cputime=27.084 memavail=722384 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 473.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15697 bytes_read=51964 bytes_retransmit=9 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.3 pwm=0.456 raspberry_pi: temp=37.2 mcu_temp: temp=25.6  sysload=0.34 cputime=27.117 memavail=722400 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 474.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15754 bytes_read=52129 bytes_retransmit=9 bytes_invalid=0 send_seq=1202 receive_seq=1202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=60.4 pwm=0.405 raspberry_pi: temp=37.4 mcu_temp: temp=25.6  sysload=0.34 cputime=27.150 memavail=721928 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 475.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15806 bytes_read=52304 bytes_retransmit=9 bytes_invalid=0 send_seq=1206 receive_seq=1206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.4 pwm=0.397 raspberry_pi: temp=37.3 mcu_temp: temp=25.7  sysload=0.34 cputime=27.182 memavail=721928 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 476.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15863 bytes_read=52512 bytes_retransmit=9 bytes_invalid=0 send_seq=1211 receive_seq=1211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.4 pwm=0.464 raspberry_pi: temp=37.7 mcu_temp: temp=25.5  sysload=0.31 cputime=27.216 memavail=722184 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 477.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15904 bytes_read=52672 bytes_retransmit=9 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.5 pwm=0.407 raspberry_pi: temp=37.4 mcu_temp: temp=25.5  sysload=0.31 cputime=27.247 memavail=721940 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 478.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15945 bytes_read=52832 bytes_retransmit=9 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.5 pwm=0.459 raspberry_pi: temp=37.2 mcu_temp: temp=25.5  sysload=0.31 cputime=27.279 memavail=721728 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 479.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15986 bytes_read=53035 bytes_retransmit=9 bytes_invalid=0 send_seq=1223 receive_seq=1223 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=60.5 pwm=0.406 raspberry_pi: temp=37.2 mcu_temp: temp=25.6  sysload=0.31 cputime=27.312 memavail=722536 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 480.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16057 bytes_read=53205 bytes_retransmit=9 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.5 pwm=0.457 raspberry_pi: temp=37.8 mcu_temp: temp=25.5  sysload=0.31 cputime=27.344 memavail=722540 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 481.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16130 bytes_read=53390 bytes_retransmit=9 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.6 pwm=0.361 raspberry_pi: temp=37.9 mcu_temp: temp=25.4  sysload=0.29 cputime=27.378 memavail=722540 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 482.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16166 bytes_read=53588 bytes_retransmit=9 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.6 pwm=0.430 raspberry_pi: temp=37.2 mcu_temp: temp=25.6  sysload=0.29 cputime=27.411 memavail=722552 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 483.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16218 bytes_read=53748 bytes_retransmit=9 bytes_invalid=0 send_seq=1242 receive_seq=1242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=60.6 pwm=0.369 raspberry_pi: temp=37.5 mcu_temp: temp=25.6  sysload=0.29 cputime=27.444 memavail=722624 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 484.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16307 bytes_read=53923 bytes_retransmit=9 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997002 heater_bed: target=60 temp=60.6 pwm=0.447 raspberry_pi: temp=38.0 mcu_temp: temp=25.6  sysload=0.29 cputime=27.477 memavail=723432 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 485.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16343 bytes_read=54121 bytes_retransmit=9 bytes_invalid=0 send_seq=1252 receive_seq=1252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997002 heater_bed: target=60 temp=60.6 pwm=0.384 raspberry_pi: temp=38.1 mcu_temp: temp=25.8  sysload=0.29 cputime=27.511 memavail=723432 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 486.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16368 bytes_read=54291 bytes_retransmit=9 bytes_invalid=0 send_seq=1255 receive_seq=1255 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997001 heater_bed: target=60 temp=60.6 pwm=0.384 raspberry_pi: temp=37.2 mcu_temp: temp=25.7  sysload=0.27 cputime=27.543 memavail=723432 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 487.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16409 bytes_read=54466 bytes_retransmit=9 bytes_invalid=0 send_seq=1259 receive_seq=1259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.7 pwm=0.373 raspberry_pi: temp=37.5 mcu_temp: temp=25.8  sysload=0.27 cputime=27.577 memavail=723440 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 488.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16466 bytes_read=54659 bytes_retransmit=9 bytes_invalid=0 send_seq=1264 receive_seq=1264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.7 pwm=0.373 raspberry_pi: temp=37.4 mcu_temp: temp=25.8  sysload=0.27 cputime=27.611 memavail=723188 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.457
Stats 489.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16523 bytes_read=54821 bytes_retransmit=9 bytes_invalid=0 send_seq=1269 receive_seq=1269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996998 heater_bed: target=60 temp=60.7 pwm=0.348 raspberry_pi: temp=37.5 mcu_temp: temp=25.8  sysload=0.27 cputime=27.645 memavail=723268 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.457
Stats 490.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16564 bytes_read=54985 bytes_retransmit=9 bytes_invalid=0 send_seq=1273 receive_seq=1273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.7 pwm=0.420 raspberry_pi: temp=37.6 mcu_temp: temp=25.8  sysload=0.27 cputime=27.677 memavail=723520 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.457
Stats 491.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16600 bytes_read=55178 bytes_retransmit=9 bytes_invalid=0 send_seq=1276 receive_seq=1276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=60.7 pwm=0.341 raspberry_pi: temp=37.5 mcu_temp: temp=25.7  sysload=0.24 cputime=27.708 memavail=723520 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.457
Stats 492.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16673 bytes_read=55348 bytes_retransmit=9 bytes_invalid=0 send_seq=1282 receive_seq=1282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=60.7 pwm=0.457 raspberry_pi: temp=37.6 mcu_temp: temp=25.8  sysload=0.24 cputime=27.746 memavail=723724 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 493.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16714 bytes_read=55523 bytes_retransmit=9 bytes_invalid=0 send_seq=1286 receive_seq=1286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.8 pwm=0.327 raspberry_pi: temp=37.7 mcu_temp: temp=25.9  sysload=0.24 cputime=27.778 memavail=723560 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 494.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16755 bytes_read=55711 bytes_retransmit=9 bytes_invalid=0 send_seq=1290 receive_seq=1290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.8 pwm=0.397 raspberry_pi: temp=38.0 mcu_temp: temp=26.0  sysload=0.24 cputime=27.812 memavail=723336 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 495.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16786 bytes_read=55882 bytes_retransmit=9 bytes_invalid=0 send_seq=1294 receive_seq=1294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=60.7 pwm=0.397 raspberry_pi: temp=37.6 mcu_temp: temp=25.9  sysload=0.24 cputime=27.845 memavail=723588 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 496.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16843 bytes_read=56077 bytes_retransmit=9 bytes_invalid=0 send_seq=1299 receive_seq=1299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=60.8 pwm=0.373 raspberry_pi: temp=37.7 mcu_temp: temp=25.9  sysload=0.22 cputime=27.878 memavail=723844 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 497.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16895 bytes_read=56265 bytes_retransmit=9 bytes_invalid=0 send_seq=1303 receive_seq=1303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=60 temp=60.8 pwm=0.314 raspberry_pi: temp=37.3 mcu_temp: temp=26.0  sysload=0.22 cputime=27.914 memavail=723792 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 498.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16920 bytes_read=56420 bytes_retransmit=9 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=60 temp=60.8 pwm=0.314 raspberry_pi: temp=37.6 mcu_temp: temp=26.0  sysload=0.22 cputime=27.946 memavail=724104 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 499.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16977 bytes_read=56600 bytes_retransmit=9 bytes_invalid=0 send_seq=1311 receive_seq=1311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=60 temp=60.8 pwm=0.320 raspberry_pi: temp=37.9 mcu_temp: temp=25.6  sysload=0.22 cputime=27.980 memavail=724388 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 500.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17045 bytes_read=56793 bytes_retransmit=9 bytes_invalid=0 send_seq=1316 receive_seq=1316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997009 heater_bed: target=60 temp=60.8 pwm=0.335 raspberry_pi: temp=38.1 mcu_temp: temp=25.9  sysload=0.22 cputime=28.013 memavail=723884 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 501.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=17086 bytes_read=56968 bytes_retransmit=9 bytes_invalid=0 send_seq=1320 receive_seq=1320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=60 temp=60.8 pwm=0.335 raspberry_pi: temp=37.8 mcu_temp: temp=25.8  sysload=0.21 cputime=28.045 memavail=723632 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.491
Stats 502.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=17111 bytes_read=57138 bytes_retransmit=9 bytes_invalid=0 send_seq=1323 receive_seq=1323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=60 temp=60.8 pwm=0.335 raspberry_pi: temp=37.9 mcu_temp: temp=25.8  sysload=0.21 cputime=28.077 memavail=723380 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.491
Stats 503.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=17136 bytes_read=57321 bytes_retransmit=9 bytes_invalid=0 send_seq=1326 receive_seq=1326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=60.8 pwm=0.335 raspberry_pi: temp=37.6 mcu_temp: temp=25.9  sysload=0.21 cputime=28.109 memavail=722420 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.491
Stats 504.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=17177 bytes_read=57481 bytes_retransmit=9 bytes_invalid=0 send_seq=1330 receive_seq=1330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.8 pwm=0.266 raspberry_pi: temp=38.1 mcu_temp: temp=26.0  sysload=0.21 cputime=28.142 memavail=722400 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.491
Stats 505.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=17234 bytes_read=57661 bytes_retransmit=9 bytes_invalid=0 send_seq=1335 receive_seq=1335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.8 pwm=0.323 raspberry_pi: temp=38.3 mcu_temp: temp=26.1  sysload=0.21 cputime=28.175 memavail=721960 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.493
Stats 506.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17275 bytes_read=57864 bytes_retransmit=9 bytes_invalid=0 send_seq=1339 receive_seq=1339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.8 pwm=0.323 raspberry_pi: temp=38.2 mcu_temp: temp=26.0  sysload=0.19 cputime=28.208 memavail=721960 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.493
Stats 507.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17300 bytes_read=58019 bytes_retransmit=9 bytes_invalid=0 send_seq=1342 receive_seq=1342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.8 pwm=0.323 raspberry_pi: temp=38.1 mcu_temp: temp=26.0  sysload=0.19 cputime=28.240 memavail=721960 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.493
Stats 508.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17357 bytes_read=58199 bytes_retransmit=9 bytes_invalid=0 send_seq=1347 receive_seq=1347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996992 heater_bed: target=60 temp=60.8 pwm=0.237 raspberry_pi: temp=37.8 mcu_temp: temp=26.0  sysload=0.19 cputime=28.274 memavail=721656 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.493
Stats 509.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17414 bytes_read=58392 bytes_retransmit=9 bytes_invalid=0 send_seq=1352 receive_seq=1352 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996992 heater_bed: target=60 temp=60.7 pwm=0.328 raspberry_pi: temp=38.1 mcu_temp: temp=26.1  sysload=0.19 cputime=28.310 memavail=721656 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.507
Stats 510.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17439 bytes_read=58547 bytes_retransmit=9 bytes_invalid=0 send_seq=1355 receive_seq=1355 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.7 pwm=0.328 raspberry_pi: temp=38.5 mcu_temp: temp=26.2  sysload=0.19 cputime=28.340 memavail=721656 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.507
Stats 511.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17496 bytes_read=58742 bytes_retransmit=9 bytes_invalid=0 send_seq=1360 receive_seq=1360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.7 pwm=0.303 raspberry_pi: temp=37.8 mcu_temp: temp=26.0  sysload=0.17 cputime=28.373 memavail=721656 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 512.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17553 bytes_read=58935 bytes_retransmit=9 bytes_invalid=0 send_seq=1365 receive_seq=1365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.8 pwm=0.226 raspberry_pi: temp=37.9 mcu_temp: temp=26.0  sysload=0.17 cputime=28.406 memavail=722040 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 513.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17626 bytes_read=59105 bytes_retransmit=9 bytes_invalid=0 send_seq=1371 receive_seq=1371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.7 pwm=0.366 raspberry_pi: temp=37.8 mcu_temp: temp=26.1  sysload=0.17 cputime=28.440 memavail=722048 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.522
Stats 514.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17667 bytes_read=59280 bytes_retransmit=9 bytes_invalid=0 send_seq=1375 receive_seq=1375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.7 pwm=0.301 raspberry_pi: temp=37.6 mcu_temp: temp=26.0  sysload=0.17 cputime=28.472 memavail=721796 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.522
Stats 515.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17740 bytes_read=59469 bytes_retransmit=9 bytes_invalid=0 send_seq=1381 receive_seq=1381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.7 pwm=0.286 raspberry_pi: temp=38.5 mcu_temp: temp=26.2  sysload=0.17 cputime=28.505 memavail=722048 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.460
Stats 516.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17781 bytes_read=59634 bytes_retransmit=9 bytes_invalid=0 send_seq=1385 receive_seq=1385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.7 pwm=0.366 raspberry_pi: temp=38.2 mcu_temp: temp=26.2  sysload=0.16 cputime=28.537 memavail=722048 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 517.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17822 bytes_read=59809 bytes_retransmit=9 bytes_invalid=0 send_seq=1389 receive_seq=1389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.7 pwm=0.272 raspberry_pi: temp=38.1 mcu_temp: temp=26.2  sysload=0.16 cputime=28.570 memavail=721796 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 518.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17847 bytes_read=59992 bytes_retransmit=9 bytes_invalid=0 send_seq=1392 receive_seq=1392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996990 heater_bed: target=60 temp=60.7 pwm=0.272 raspberry_pi: temp=38.1 mcu_temp: temp=26.2  sysload=0.16 cputime=28.602 memavail=720868 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 519.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17888 bytes_read=60152 bytes_retransmit=9 bytes_invalid=0 send_seq=1396 receive_seq=1396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996990 heater_bed: target=60 temp=60.7 pwm=0.272 raspberry_pi: temp=37.5 mcu_temp: temp=26.2  sysload=0.16 cputime=28.634 memavail=721380 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.487
Stats 520.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=17913 bytes_read=60322 bytes_retransmit=9 bytes_invalid=0 send_seq=1399 receive_seq=1399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.7 pwm=0.345 raspberry_pi: temp=38.3 mcu_temp: temp=26.3  sysload=0.16 cputime=28.666 memavail=721132 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.487
Stats 521.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18002 bytes_read=60540 bytes_retransmit=9 bytes_invalid=0 send_seq=1406 receive_seq=1406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.7 pwm=0.263 raspberry_pi: temp=38.5 mcu_temp: temp=26.3  sysload=0.15 cputime=28.700 memavail=720880 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.487
Stats 522.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18027 bytes_read=60695 bytes_retransmit=9 bytes_invalid=0 send_seq=1409 receive_seq=1409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.7 pwm=0.263 raspberry_pi: temp=37.6 mcu_temp: temp=26.4  sysload=0.15 cputime=28.731 memavail=720880 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.487
Stats 523.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18068 bytes_read=60870 bytes_retransmit=9 bytes_invalid=0 send_seq=1413 receive_seq=1413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=60.7 pwm=0.263 raspberry_pi: temp=38.1 mcu_temp: temp=26.1  sysload=0.15 cputime=28.764 memavail=720404 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 524.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18109 bytes_read=61058 bytes_retransmit=9 bytes_invalid=0 send_seq=1417 receive_seq=1417 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997001 heater_bed: target=60 temp=60.7 pwm=0.344 raspberry_pi: temp=38.0 mcu_temp: temp=26.2  sysload=0.15 cputime=28.797 memavail=720404 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 525.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18150 bytes_read=61218 bytes_retransmit=9 bytes_invalid=0 send_seq=1421 receive_seq=1421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.7 pwm=0.270 raspberry_pi: temp=38.3 mcu_temp: temp=26.2  sysload=0.15 cputime=28.829 memavail=720160 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 526.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18191 bytes_read=61408 bytes_retransmit=9 bytes_invalid=0 send_seq=1425 receive_seq=1425 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.6 pwm=0.276 raspberry_pi: temp=38.7 mcu_temp: temp=26.2  sysload=0.13 cputime=28.861 memavail=720160 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 527.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18280 bytes_read=61611 bytes_retransmit=9 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.7 pwm=0.256 raspberry_pi: temp=38.2 mcu_temp: temp=26.3  sysload=0.13 cputime=28.894 memavail=719908 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 528.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18305 bytes_read=61766 bytes_retransmit=9 bytes_invalid=0 send_seq=1435 receive_seq=1435 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.6 pwm=0.256 raspberry_pi: temp=38.7 mcu_temp: temp=26.3  sysload=0.13 cputime=28.926 memavail=719660 print_time=86.346 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 529.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18733 bytes_read=62185 bytes_retransmit=9 bytes_invalid=0 send_seq=1455 receive_seq=1455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.6 pwm=0.302 raspberry_pi: temp=38.3 mcu_temp: temp=26.2  sysload=0.13 cputime=28.994 memavail=719660 print_time=325.980 buffer_time=5.191 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
TMC 'extruder' reports GSTAT:      00000001 reset=1(Reset)
TMC 'extruder' reports GSTAT:      00000000
Pausing toolhead to calculate extruder phase offset
Stats 530.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18889 bytes_read=62527 bytes_retransmit=9 bytes_invalid=0 send_seq=1465 receive_seq=1465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.6 pwm=0.302 raspberry_pi: temp=38.6 mcu_temp: temp=26.2  sysload=0.13 cputime=29.054 memavail=719668 print_time=325.980 buffer_time=4.190 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 531.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=18974 bytes_read=62753 bytes_retransmit=9 bytes_invalid=0 send_seq=1472 receive_seq=1472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.6 pwm=0.236 raspberry_pi: temp=38.9 mcu_temp: temp=26.2  sysload=0.12 cputime=29.097 memavail=719416 print_time=325.980 buffer_time=3.189 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 532.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=19027 bytes_read=62969 bytes_retransmit=9 bytes_invalid=0 send_seq=1477 receive_seq=1477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.6 pwm=0.306 raspberry_pi: temp=38.5 mcu_temp: temp=26.3  sysload=0.12 cputime=29.141 memavail=719416 print_time=325.980 buffer_time=2.188 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 533.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=19144 bytes_read=63218 bytes_retransmit=9 bytes_invalid=0 send_seq=1486 receive_seq=1486 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996978 heater_bed: target=60 temp=60.6 pwm=0.250 raspberry_pi: temp=38.9 mcu_temp: temp=26.4  sysload=0.12 cputime=29.188 memavail=719220 print_time=325.980 buffer_time=1.188 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 534.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=19197 bytes_read=63419 bytes_retransmit=9 bytes_invalid=0 send_seq=1491 receive_seq=1491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.6 pwm=0.250 raspberry_pi: temp=38.8 mcu_temp: temp=26.1  sysload=0.12 cputime=29.229 memavail=719228 print_time=325.980 buffer_time=0.187 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 535.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=19313 bytes_read=63673 bytes_retransmit=9 bytes_invalid=0 send_seq=1500 receive_seq=1500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996978 heater_bed: target=60 temp=60.6 pwm=0.193 raspberry_pi: temp=39.1 mcu_temp: temp=26.3  sysload=0.12 cputime=29.273 memavail=718976 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.554
Stats 536.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=19430 bytes_read=63937 bytes_retransmit=9 bytes_invalid=0 send_seq=1509 receive_seq=1509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.6 pwm=0.309 raspberry_pi: temp=38.9 mcu_temp: temp=26.5  sysload=0.11 cputime=29.315 memavail=718980 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.607
Stats 537.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=19515 bytes_read=64148 bytes_retransmit=9 bytes_invalid=0 send_seq=1516 receive_seq=1516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.6 pwm=0.239 raspberry_pi: temp=38.7 mcu_temp: temp=26.2  sysload=0.11 cputime=29.358 memavail=718980 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.607
Stats 538.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=19568 bytes_read=64364 bytes_retransmit=9 bytes_invalid=0 send_seq=1521 receive_seq=1521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.5 pwm=0.239 raspberry_pi: temp=38.0 mcu_temp: temp=26.3  sysload=0.11 cputime=29.395 memavail=719232 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.607
Stats 539.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=19642 bytes_read=64603 bytes_retransmit=9 bytes_invalid=0 send_seq=1528 receive_seq=1528 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=60 temp=60.5 pwm=0.239 raspberry_pi: temp=38.0 mcu_temp: temp=26.3  sysload=0.11 cputime=29.434 memavail=719044 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.607
Stats 540.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=19727 bytes_read=64814 bytes_retransmit=9 bytes_invalid=0 send_seq=1535 receive_seq=1535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.5 pwm=0.353 raspberry_pi: temp=38.1 mcu_temp: temp=26.5  sysload=0.11 cputime=29.471 memavail=719044 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.552
Stats 541.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=19828 bytes_read=65049 bytes_retransmit=9 bytes_invalid=0 send_seq=1543 receive_seq=1543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.5 pwm=0.297 raspberry_pi: temp=38.0 mcu_temp: temp=26.5  sysload=0.18 cputime=29.513 memavail=719044 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.552
Stats 542.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=19900 bytes_read=65282 bytes_retransmit=9 bytes_invalid=0 send_seq=1550 receive_seq=1550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996988 heater_bed: target=60 temp=60.5 pwm=0.297 raspberry_pi: temp=38.1 mcu_temp: temp=26.5  sysload=0.18 cputime=29.551 memavail=719044 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.480
Stats 543.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20001 bytes_read=65498 bytes_retransmit=9 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 heater_bed: target=60 temp=60.5 pwm=0.186 raspberry_pi: temp=38.0 mcu_temp: temp=26.6  sysload=0.18 cputime=29.589 memavail=718820 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.480
Stats 544.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20081 bytes_read=65719 bytes_retransmit=9 bytes_invalid=0 send_seq=1564 receive_seq=1564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 heater_bed: target=60 temp=60.5 pwm=0.270 raspberry_pi: temp=38.1 mcu_temp: temp=26.3  sysload=0.18 cputime=29.628 memavail=718832 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 545.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20177 bytes_read=65958 bytes_retransmit=9 bytes_invalid=0 send_seq=1571 receive_seq=1571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.5 pwm=0.284 raspberry_pi: temp=38.9 mcu_temp: temp=26.4  sysload=0.18 cputime=29.667 memavail=718832 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.421
Stats 546.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20257 bytes_read=66179 bytes_retransmit=9 bytes_invalid=0 send_seq=1577 receive_seq=1577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.5 pwm=0.254 raspberry_pi: temp=38.7 mcu_temp: temp=26.3  sysload=0.17 cputime=29.707 memavail=718844 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.421
Stats 547.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20353 bytes_read=66405 bytes_retransmit=9 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.5 pwm=0.286 raspberry_pi: temp=38.2 mcu_temp: temp=26.5  sysload=0.17 cputime=29.746 memavail=719356 print_time=325.980 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.421
Stats 548.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20605 bytes_read=66664 bytes_retransmit=9 bytes_invalid=0 send_seq=1595 receive_seq=1595 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.5 pwm=0.250 raspberry_pi: temp=38.0 mcu_temp: temp=26.6  sysload=0.17 cputime=29.790 memavail=719180 print_time=344.604 buffer_time=4.803 print_stall=0 extruder: target=200 temp=200.4 pwm=0.421
Stats 549.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20674 bytes_read=66870 bytes_retransmit=9 bytes_invalid=0 send_seq=1601 receive_seq=1601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.4 pwm=0.250 raspberry_pi: temp=38.9 mcu_temp: temp=26.7  sysload=0.17 cputime=29.828 memavail=718936 print_time=344.604 buffer_time=3.803 print_stall=0 extruder: target=200 temp=200.4 pwm=0.450
Stats 550.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20727 bytes_read=67086 bytes_retransmit=9 bytes_invalid=0 send_seq=1606 receive_seq=1606 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.4 pwm=0.250 raspberry_pi: temp=38.5 mcu_temp: temp=26.5  sysload=0.17 cputime=29.869 memavail=718936 print_time=344.604 buffer_time=2.803 print_stall=0 extruder: target=200 temp=200.4 pwm=0.450
Stats 551.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=20780 bytes_read=67330 bytes_retransmit=9 bytes_invalid=0 send_seq=1611 receive_seq=1611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.4 pwm=0.250 raspberry_pi: temp=38.4 mcu_temp: temp=26.5  sysload=0.16 cputime=29.908 memavail=718936 print_time=344.604 buffer_time=1.802 print_stall=0 extruder: target=200 temp=200.4 pwm=0.450
Stats 552.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=20849 bytes_read=67536 bytes_retransmit=9 bytes_invalid=0 send_seq=1617 receive_seq=1617 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.4 pwm=0.308 raspberry_pi: temp=38.6 mcu_temp: temp=26.6  sysload=0.16 cputime=29.945 memavail=718960 print_time=344.604 buffer_time=0.801 print_stall=0 extruder: target=200 temp=200.3 pwm=0.450
Stats 553.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=20929 bytes_read=67757 bytes_retransmit=9 bytes_invalid=0 send_seq=1623 receive_seq=1623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.4 pwm=0.231 raspberry_pi: temp=38.3 mcu_temp: temp=26.5  sysload=0.16 cputime=29.985 memavail=718496 print_time=344.604 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.522
Stats 554.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=21016 bytes_read=67986 bytes_retransmit=9 bytes_invalid=0 send_seq=1628 receive_seq=1628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.4 pwm=0.231 raspberry_pi: temp=38.5 mcu_temp: temp=26.6  sysload=0.16 cputime=30.024 memavail=718252 print_time=344.604 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.579
Stats 555.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=21085 bytes_read=68192 bytes_retransmit=9 bytes_invalid=0 send_seq=1634 receive_seq=1634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.4 pwm=0.314 raspberry_pi: temp=38.7 mcu_temp: temp=26.6  sysload=0.16 cputime=30.064 memavail=718252 print_time=344.604 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.579
Stats 556.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000031 bytes_write=21155 bytes_read=68439 bytes_retransmit=9 bytes_invalid=0 send_seq=1640 receive_seq=1640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=60.4 pwm=0.264 raspberry_pi: temp=38.2 mcu_temp: temp=26.7  sysload=0.14 cputime=30.103 memavail=718252 print_time=344.604 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.579
Stats 557.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000031 bytes_write=21256 bytes_read=68683 bytes_retransmit=9 bytes_invalid=0 send_seq=1648 receive_seq=1648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=60.4 pwm=0.242 raspberry_pi: temp=37.8 mcu_temp: temp=26.7  sysload=0.14 cputime=30.145 memavail=719176 print_time=344.604 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.638
Stats 558.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000031 bytes_write=21346 bytes_read=68899 bytes_retransmit=9 bytes_invalid=0 send_seq=1656 receive_seq=1656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.4 pwm=0.242 raspberry_pi: temp=38.4 mcu_temp: temp=27.0  sysload=0.14 cputime=30.184 memavail=718476 print_time=344.604 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.587
Stats 559.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000031 bytes_write=21410 bytes_read=69115 bytes_retransmit=9 bytes_invalid=0 send_seq=1661 receive_seq=1661 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.4 pwm=0.296 raspberry_pi: temp=38.5 mcu_temp: temp=26.6  sysload=0.14 cputime=30.229 memavail=718232 print_time=344.604 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.587
Stats 560.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000031 bytes_write=21646 bytes_read=69369 bytes_retransmit=9 bytes_invalid=0 send_seq=1671 receive_seq=1671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996974 heater_bed: target=60 temp=60.4 pwm=0.194 raspberry_pi: temp=38.7 mcu_temp: temp=26.6  sysload=0.14 cputime=30.274 memavail=718236 print_time=356.814 buffer_time=5.007 print_stall=0 extruder: target=200 temp=199.5 pwm=0.587
Stats 561.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=21726 bytes_read=69590 bytes_retransmit=9 bytes_invalid=0 send_seq=1677 receive_seq=1677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.4 pwm=0.194 raspberry_pi: temp=38.8 mcu_temp: temp=26.7  sysload=0.13 cputime=30.314 memavail=718236 print_time=356.814 buffer_time=4.006 print_stall=0 extruder: target=200 temp=199.6 pwm=0.516
Stats 562.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=21801 bytes_read=69820 bytes_retransmit=9 bytes_invalid=0 send_seq=1682 receive_seq=1682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.3 pwm=0.245 raspberry_pi: temp=38.6 mcu_temp: temp=26.7  sysload=0.13 cputime=30.357 memavail=718236 print_time=356.814 buffer_time=3.005 print_stall=0 extruder: target=200 temp=199.8 pwm=0.516
Stats 563.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=21886 bytes_read=70045 bytes_retransmit=9 bytes_invalid=0 send_seq=1689 receive_seq=1689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.3 pwm=0.245 raspberry_pi: temp=38.4 mcu_temp: temp=26.9  sysload=0.13 cputime=30.399 memavail=718004 print_time=356.814 buffer_time=2.004 print_stall=0 extruder: target=200 temp=199.9 pwm=0.456
Stats 564.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=21939 bytes_read=70246 bytes_retransmit=9 bytes_invalid=0 send_seq=1694 receive_seq=1694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.3 pwm=0.245 raspberry_pi: temp=38.5 mcu_temp: temp=26.9  sysload=0.13 cputime=30.443 memavail=717760 print_time=356.814 buffer_time=1.004 print_stall=0 extruder: target=200 temp=200.0 pwm=0.456
Stats 565.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=22008 bytes_read=70481 bytes_retransmit=9 bytes_invalid=0 send_seq=1700 receive_seq=1700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.3 pwm=0.296 raspberry_pi: temp=39.2 mcu_temp: temp=26.9  sysload=0.13 cputime=30.487 memavail=717760 print_time=356.814 buffer_time=0.003 print_stall=0 extruder: target=200 temp=200.1 pwm=0.456
Stats 566.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=22126 bytes_read=70724 bytes_retransmit=9 bytes_invalid=0 send_seq=1709 receive_seq=1709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=60 temp=60.3 pwm=0.241 raspberry_pi: temp=38.5 mcu_temp: temp=26.8  sysload=0.12 cputime=30.532 memavail=717508 print_time=356.814 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.528
Stats 567.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=22179 bytes_read=70915 bytes_retransmit=9 bytes_invalid=0 send_seq=1714 receive_seq=1714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.3 pwm=0.241 raspberry_pi: temp=38.2 mcu_temp: temp=26.9  sysload=0.12 cputime=30.573 memavail=717260 print_time=356.814 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.528
Stats 568.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=22421 bytes_read=71170 bytes_retransmit=9 bytes_invalid=0 send_seq=1724 receive_seq=1724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.3 pwm=0.206 raspberry_pi: temp=38.3 mcu_temp: temp=26.8  sysload=0.12 cputime=30.623 memavail=717012 print_time=364.749 buffer_time=4.936 print_stall=0 extruder: target=200 temp=200.0 pwm=0.528
Stats 569.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=22474 bytes_read=71385 bytes_retransmit=9 bytes_invalid=0 send_seq=1729 receive_seq=1729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.3 pwm=0.206 raspberry_pi: temp=38.7 mcu_temp: temp=27.0  sysload=0.12 cputime=30.666 memavail=717272 print_time=364.749 buffer_time=3.936 print_stall=0 extruder: target=200 temp=199.9 pwm=0.528
Stats 570.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=22570 bytes_read=71596 bytes_retransmit=9 bytes_invalid=0 send_seq=1736 receive_seq=1736 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996988 heater_bed: target=60 temp=60.3 pwm=0.310 raspberry_pi: temp=38.9 mcu_temp: temp=26.9  sysload=0.12 cputime=30.708 memavail=717280 print_time=364.749 buffer_time=2.936 print_stall=0 extruder: target=200 temp=199.8 pwm=0.528
Stats 571.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000031 bytes_write=22655 bytes_read=71851 bytes_retransmit=9 bytes_invalid=0 send_seq=1743 receive_seq=1743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.3 pwm=0.258 raspberry_pi: temp=38.4 mcu_temp: temp=26.7  sysload=0.11 cputime=30.752 memavail=717308 print_time=364.749 buffer_time=1.934 print_stall=0 extruder: target=200 temp=199.8 pwm=0.559
Stats 572.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000031 bytes_write=22724 bytes_read=72071 bytes_retransmit=9 bytes_invalid=0 send_seq=1749 receive_seq=1749 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.3 pwm=0.185 raspberry_pi: temp=38.7 mcu_temp: temp=26.8  sysload=0.11 cputime=30.793 memavail=717508 print_time=364.749 buffer_time=0.934 print_stall=0 extruder: target=200 temp=199.7 pwm=0.559
Stats 573.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000031 bytes_write=22809 bytes_read=72282 bytes_retransmit=9 bytes_invalid=0 send_seq=1756 receive_seq=1756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.3 pwm=0.259 raspberry_pi: temp=39.0 mcu_temp: temp=26.9  sysload=0.11 cputime=30.834 memavail=717308 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.616
Stats 574.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000031 bytes_write=22895 bytes_read=72522 bytes_retransmit=9 bytes_invalid=0 send_seq=1763 receive_seq=1763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.2 pwm=0.259 raspberry_pi: temp=39.0 mcu_temp: temp=26.8  sysload=0.11 cputime=30.877 memavail=717560 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.616
Stats 575.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000031 bytes_write=22996 bytes_read=72752 bytes_retransmit=9 bytes_invalid=0 send_seq=1771 receive_seq=1771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.3 pwm=0.208 raspberry_pi: temp=38.6 mcu_temp: temp=27.1  sysload=0.11 cputime=30.920 memavail=717580 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.616
Stats 576.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=23065 bytes_read=72973 bytes_retransmit=9 bytes_invalid=0 send_seq=1777 receive_seq=1777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996988 heater_bed: target=60 temp=60.2 pwm=0.299 raspberry_pi: temp=38.7 mcu_temp: temp=26.9  sysload=0.10 cputime=30.962 memavail=717860 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.616
Stats 577.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=23161 bytes_read=73213 bytes_retransmit=9 bytes_invalid=0 send_seq=1784 receive_seq=1784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.2 pwm=0.241 raspberry_pi: temp=38.9 mcu_temp: temp=27.1  sysload=0.10 cputime=31.005 memavail=717808 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.557
Stats 578.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=23241 bytes_read=73433 bytes_retransmit=9 bytes_invalid=0 send_seq=1790 receive_seq=1790 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.2 pwm=0.295 raspberry_pi: temp=39.1 mcu_temp: temp=27.1  sysload=0.10 cputime=31.047 memavail=717676 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.505
Stats 579.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=23310 bytes_read=73639 bytes_retransmit=9 bytes_invalid=0 send_seq=1796 receive_seq=1796 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.2 pwm=0.219 raspberry_pi: temp=38.6 mcu_temp: temp=27.0  sysload=0.10 cputime=31.089 memavail=717940 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.505
Stats 580.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=23374 bytes_read=73869 bytes_retransmit=9 bytes_invalid=0 send_seq=1801 receive_seq=1801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.2 pwm=0.219 raspberry_pi: temp=38.8 mcu_temp: temp=27.1  sysload=0.10 cputime=31.133 memavail=718208 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.447
Stats 581.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23427 bytes_read=74099 bytes_retransmit=9 bytes_invalid=0 send_seq=1806 receive_seq=1806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.2 pwm=0.219 raspberry_pi: temp=38.8 mcu_temp: temp=27.1  sysload=0.09 cputime=31.174 memavail=718208 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.447
Stats 582.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23512 bytes_read=74310 bytes_retransmit=9 bytes_invalid=0 send_seq=1813 receive_seq=1813 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996990 heater_bed: target=60 temp=60.2 pwm=0.194 raspberry_pi: temp=39.1 mcu_temp: temp=27.1  sysload=0.09 cputime=31.216 memavail=718488 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.447
Stats 583.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23592 bytes_read=74545 bytes_retransmit=9 bytes_invalid=0 send_seq=1819 receive_seq=1819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996988 heater_bed: target=60 temp=60.2 pwm=0.254 raspberry_pi: temp=38.9 mcu_temp: temp=27.2  sysload=0.09 cputime=31.257 memavail=718268 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.447
Stats 584.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23670 bytes_read=74765 bytes_retransmit=9 bytes_invalid=0 send_seq=1825 receive_seq=1825 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.2 pwm=0.254 raspberry_pi: temp=38.6 mcu_temp: temp=27.2  sysload=0.09 cputime=31.296 memavail=718520 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.402
Stats 585.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23734 bytes_read=74966 bytes_retransmit=9 bytes_invalid=0 send_seq=1830 receive_seq=1830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.2 pwm=0.194 raspberry_pi: temp=39.0 mcu_temp: temp=27.2  sysload=0.09 cputime=31.336 memavail=718520 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.402
Stats 586.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=23814 bytes_read=75216 bytes_retransmit=9 bytes_invalid=0 send_seq=1836 receive_seq=1836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.2 pwm=0.227 raspberry_pi: temp=39.0 mcu_temp: temp=27.2  sysload=0.08 cputime=31.375 memavail=718780 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.402
Stats 587.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=23899 bytes_read=75441 bytes_retransmit=9 bytes_invalid=0 send_seq=1843 receive_seq=1843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=60 temp=60.2 pwm=0.307 raspberry_pi: temp=39.0 mcu_temp: temp=27.4  sysload=0.08 cputime=31.413 memavail=718780 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.468
Stats 588.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=23979 bytes_read=75647 bytes_retransmit=9 bytes_invalid=0 send_seq=1849 receive_seq=1849 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.2 pwm=0.296 raspberry_pi: temp=38.9 mcu_temp: temp=27.2  sysload=0.08 cputime=31.451 memavail=718556 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.468
Stats 589.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24043 bytes_read=75877 bytes_retransmit=9 bytes_invalid=0 send_seq=1854 receive_seq=1854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.2 pwm=0.172 raspberry_pi: temp=38.8 mcu_temp: temp=27.3  sysload=0.08 cputime=31.490 memavail=718556 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.468
Stats 590.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24107 bytes_read=76092 bytes_retransmit=9 bytes_invalid=0 send_seq=1859 receive_seq=1859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.2 pwm=0.282 raspberry_pi: temp=39.4 mcu_temp: temp=27.2  sysload=0.08 cputime=31.527 memavail=719384 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.468
Stats 591.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24185 bytes_read=76313 bytes_retransmit=9 bytes_invalid=0 send_seq=1865 receive_seq=1865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996990 heater_bed: target=60 temp=60.2 pwm=0.282 raspberry_pi: temp=38.7 mcu_temp: temp=27.3  sysload=0.24 cputime=31.565 memavail=719588 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.481
Stats 592.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24270 bytes_read=76541 bytes_retransmit=9 bytes_invalid=0 send_seq=1872 receive_seq=1872 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.2 pwm=0.168 raspberry_pi: temp=39.2 mcu_temp: temp=27.3  sysload=0.24 cputime=31.603 memavail=719640 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.481
Stats 593.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24339 bytes_read=76755 bytes_retransmit=9 bytes_invalid=0 send_seq=1878 receive_seq=1878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.2 pwm=0.267 raspberry_pi: temp=39.0 mcu_temp: temp=27.2  sysload=0.24 cputime=31.642 memavail=719204 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.481
Stats 594.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24392 bytes_read=76956 bytes_retransmit=9 bytes_invalid=0 send_seq=1883 receive_seq=1883 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.2 pwm=0.267 raspberry_pi: temp=39.4 mcu_temp: temp=27.1  sysload=0.24 cputime=31.679 memavail=719484 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.481
Stats 595.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24461 bytes_read=77191 bytes_retransmit=9 bytes_invalid=0 send_seq=1889 receive_seq=1889 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.2 pwm=0.217 raspberry_pi: temp=39.3 mcu_temp: temp=27.3  sysload=0.24 cputime=31.718 memavail=719492 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.481
Stats 596.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24525 bytes_read=77421 bytes_retransmit=9 bytes_invalid=0 send_seq=1894 receive_seq=1894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.2 pwm=0.217 raspberry_pi: temp=39.3 mcu_temp: temp=27.3  sysload=0.22 cputime=31.756 memavail=719744 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.477
Stats 597.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24589 bytes_read=77622 bytes_retransmit=9 bytes_invalid=0 send_seq=1899 receive_seq=1899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.1 pwm=0.301 raspberry_pi: temp=39.3 mcu_temp: temp=27.2  sysload=0.22 cputime=31.794 memavail=719996 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 598.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24669 bytes_read=77857 bytes_retransmit=9 bytes_invalid=0 send_seq=1905 receive_seq=1905 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=60 temp=60.1 pwm=0.283 raspberry_pi: temp=39.1 mcu_temp: temp=27.3  sysload=0.22 cputime=31.833 memavail=719828 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 599.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24738 bytes_read=78077 bytes_retransmit=9 bytes_invalid=0 send_seq=1911 receive_seq=1911 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996978 heater_bed: target=60 temp=60.1 pwm=0.225 raspberry_pi: temp=39.3 mcu_temp: temp=27.3  sysload=0.22 cputime=31.872 memavail=720084 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 600.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24807 bytes_read=78283 bytes_retransmit=9 bytes_invalid=0 send_seq=1917 receive_seq=1917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=60.1 pwm=0.225 raspberry_pi: temp=40.0 mcu_temp: temp=27.2  sysload=0.22 cputime=31.910 memavail=720112 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 601.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24892 bytes_read=78538 bytes_retransmit=9 bytes_invalid=0 send_seq=1924 receive_seq=1924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.1 pwm=0.224 raspberry_pi: temp=39.2 mcu_temp: temp=27.3  sysload=0.20 cputime=31.949 memavail=720120 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 602.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24945 bytes_read=78753 bytes_retransmit=9 bytes_invalid=0 send_seq=1929 receive_seq=1929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=60.1 pwm=0.224 raspberry_pi: temp=39.4 mcu_temp: temp=27.2  sysload=0.20 cputime=31.986 memavail=720248 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 603.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25025 bytes_read=78959 bytes_retransmit=9 bytes_invalid=0 send_seq=1935 receive_seq=1935 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.1 pwm=0.213 raspberry_pi: temp=39.0 mcu_temp: temp=27.5  sysload=0.20 cputime=32.024 memavail=719784 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 604.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25105 bytes_read=79194 bytes_retransmit=9 bytes_invalid=0 send_seq=1941 receive_seq=1941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.1 pwm=0.328 raspberry_pi: temp=39.6 mcu_temp: temp=27.4  sysload=0.20 cputime=32.062 memavail=719532 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 605.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25174 bytes_read=79414 bytes_retransmit=9 bytes_invalid=0 send_seq=1947 receive_seq=1947 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 heater_bed: target=60 temp=60.1 pwm=0.216 raspberry_pi: temp=39.3 mcu_temp: temp=27.3  sysload=0.20 cputime=32.103 memavail=719284 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 606.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25254 bytes_read=79635 bytes_retransmit=9 bytes_invalid=0 send_seq=1953 receive_seq=1953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.1 pwm=0.286 raspberry_pi: temp=38.8 mcu_temp: temp=27.3  sysload=0.18 cputime=32.141 memavail=719292 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.543
Stats 607.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25366 bytes_read=79880 bytes_retransmit=9 bytes_invalid=0 send_seq=1961 receive_seq=1961 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.1 pwm=0.155 raspberry_pi: temp=39.3 mcu_temp: temp=27.4  sysload=0.18 cputime=32.181 memavail=719560 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.492
Stats 608.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25435 bytes_read=80100 bytes_retransmit=9 bytes_invalid=0 send_seq=1967 receive_seq=1967 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.1 pwm=0.228 raspberry_pi: temp=39.0 mcu_temp: temp=27.1  sysload=0.18 cputime=32.219 memavail=719840 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.492
Stats 609.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25488 bytes_read=80301 bytes_retransmit=9 bytes_invalid=0 send_seq=1972 receive_seq=1972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.1 pwm=0.228 raspberry_pi: temp=38.9 mcu_temp: temp=27.5  sysload=0.18 cputime=32.257 memavail=719852 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.492
Stats 610.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25568 bytes_read=80536 bytes_retransmit=9 bytes_invalid=0 send_seq=1978 receive_seq=1978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.1 pwm=0.241 raspberry_pi: temp=39.3 mcu_temp: temp=27.5  sysload=0.18 cputime=32.296 memavail=719868 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.492
Stats 611.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25669 bytes_read=80781 bytes_retransmit=9 bytes_invalid=0 send_seq=1986 receive_seq=1986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.1 pwm=0.199 raspberry_pi: temp=39.4 mcu_temp: temp=27.5  sysload=0.17 cputime=32.336 memavail=719908 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 612.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25738 bytes_read=80987 bytes_retransmit=9 bytes_invalid=0 send_seq=1992 receive_seq=1992 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=60 temp=60.1 pwm=0.337 raspberry_pi: temp=39.9 mcu_temp: temp=27.5  sysload=0.17 cputime=32.370 memavail=720192 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 613.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25818 bytes_read=81222 bytes_retransmit=9 bytes_invalid=0 send_seq=1998 receive_seq=1998 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=60 temp=60.1 pwm=0.294 raspberry_pi: temp=39.3 mcu_temp: temp=27.4  sysload=0.17 cputime=32.410 memavail=720800 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 614.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25903 bytes_read=81447 bytes_retransmit=9 bytes_invalid=0 send_seq=2005 receive_seq=2005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996978 heater_bed: target=60 temp=60.1 pwm=0.250 raspberry_pi: temp=39.3 mcu_temp: temp=27.4  sysload=0.17 cputime=32.448 memavail=720800 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 615.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25999 bytes_read=81658 bytes_retransmit=9 bytes_invalid=0 send_seq=2012 receive_seq=2012 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=60 temp=60.1 pwm=0.181 raspberry_pi: temp=39.0 mcu_temp: temp=27.3  sysload=0.17 cputime=32.486 memavail=720804 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 616.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26063 bytes_read=81903 bytes_retransmit=9 bytes_invalid=0 send_seq=2017 receive_seq=2017 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.1 pwm=0.239 raspberry_pi: temp=39.0 mcu_temp: temp=27.3  sysload=0.16 cputime=32.524 memavail=720808 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 617.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26116 bytes_read=82112 bytes_retransmit=9 bytes_invalid=0 send_seq=2022 receive_seq=2022 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.1 pwm=0.239 raspberry_pi: temp=39.6 mcu_temp: temp=27.5  sysload=0.16 cputime=32.561 memavail=720808 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 618.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26175 bytes_read=82318 bytes_retransmit=9 bytes_invalid=0 send_seq=2028 receive_seq=2028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 heater_bed: target=60 temp=60.1 pwm=0.239 raspberry_pi: temp=39.3 mcu_temp: temp=27.6  sysload=0.16 cputime=32.598 memavail=720124 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 619.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26260 bytes_read=82555 bytes_retransmit=9 bytes_invalid=0 send_seq=2035 receive_seq=2035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.0 pwm=0.302 raspberry_pi: temp=39.3 mcu_temp: temp=27.6  sysload=0.16 cputime=32.636 memavail=720124 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 620.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26329 bytes_read=82775 bytes_retransmit=9 bytes_invalid=0 send_seq=2041 receive_seq=2041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=39.4 mcu_temp: temp=27.5  sysload=0.16 cputime=32.673 memavail=720124 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 621.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26382 bytes_read=82991 bytes_retransmit=9 bytes_invalid=0 send_seq=2046 receive_seq=2046 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.1 pwm=0.239 raspberry_pi: temp=39.3 mcu_temp: temp=27.5  sysload=0.14 cputime=32.710 memavail=720132 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 622.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26435 bytes_read=83221 bytes_retransmit=9 bytes_invalid=0 send_seq=2051 receive_seq=2051 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=39.5 mcu_temp: temp=27.4  sysload=0.14 cputime=32.747 memavail=720132 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 623.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26499 bytes_read=83436 bytes_retransmit=9 bytes_invalid=0 send_seq=2056 receive_seq=2056 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=39.3 mcu_temp: temp=27.5  sysload=0.14 cputime=32.785 memavail=720488 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.442
Stats 624.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26584 bytes_read=83647 bytes_retransmit=9 bytes_invalid=0 send_seq=2063 receive_seq=2063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.0 pwm=0.226 raspberry_pi: temp=39.4 mcu_temp: temp=27.5  sysload=0.14 cputime=32.822 memavail=720744 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.442
Stats 625.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26637 bytes_read=83877 bytes_retransmit=9 bytes_invalid=0 send_seq=2068 receive_seq=2068 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.0 pwm=0.226 raspberry_pi: temp=39.2 mcu_temp: temp=27.7  sysload=0.14 cputime=32.859 memavail=721248 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.442
Stats 626.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26706 bytes_read=84112 bytes_retransmit=9 bytes_invalid=0 send_seq=2074 receive_seq=2074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.0 pwm=0.279 raspberry_pi: temp=39.2 mcu_temp: temp=27.5  sysload=0.37 cputime=32.897 memavail=721508 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.442
Stats 627.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26791 bytes_read=84323 bytes_retransmit=9 bytes_invalid=0 send_seq=2081 receive_seq=2081 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996998 heater_bed: target=60 temp=60.1 pwm=0.228 raspberry_pi: temp=39.3 mcu_temp: temp=27.8  sysload=0.37 cputime=32.937 memavail=721508 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 628.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26892 bytes_read=84582 bytes_retransmit=9 bytes_invalid=0 send_seq=2089 receive_seq=2089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.0 pwm=0.308 raspberry_pi: temp=39.3 mcu_temp: temp=27.7  sysload=0.37 cputime=32.977 memavail=721520 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 629.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26972 bytes_read=84788 bytes_retransmit=9 bytes_invalid=0 send_seq=2095 receive_seq=2095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=60 temp=60.0 pwm=0.274 raspberry_pi: temp=39.3 mcu_temp: temp=27.7  sysload=0.37 cputime=33.017 memavail=721524 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 630.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27057 bytes_read=84999 bytes_retransmit=9 bytes_invalid=0 send_seq=2102 receive_seq=2102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=60 temp=60.0 pwm=0.225 raspberry_pi: temp=39.3 mcu_temp: temp=27.5  sysload=0.37 cputime=33.056 memavail=721776 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 631.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27142 bytes_read=85268 bytes_retransmit=9 bytes_invalid=0 send_seq=2109 receive_seq=2109 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=39.7 mcu_temp: temp=27.6  sysload=0.34 cputime=33.102 memavail=721788 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.485
Stats 632.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27243 bytes_read=85484 bytes_retransmit=9 bytes_invalid=0 send_seq=2117 receive_seq=2117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996998 heater_bed: target=60 temp=60.0 pwm=0.198 raspberry_pi: temp=39.7 mcu_temp: temp=27.6  sysload=0.34 cputime=33.141 memavail=722044 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 633.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27323 bytes_read=85690 bytes_retransmit=9 bytes_invalid=0 send_seq=2123 receive_seq=2123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996998 heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=39.1 mcu_temp: temp=27.7  sysload=0.34 cputime=33.179 memavail=723084 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 634.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27419 bytes_read=85944 bytes_retransmit=9 bytes_invalid=0 send_seq=2130 receive_seq=2130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=60 temp=60.0 pwm=0.266 raspberry_pi: temp=39.7 mcu_temp: temp=27.6  sysload=0.34 cputime=33.221 memavail=722852 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.485
Stats 635.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27504 bytes_read=86155 bytes_retransmit=9 bytes_invalid=0 send_seq=2137 receive_seq=2137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996998 heater_bed: target=60 temp=60.0 pwm=0.190 raspberry_pi: temp=39.1 mcu_temp: temp=27.5  sysload=0.34 cputime=33.259 memavail=723108 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 636.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27573 bytes_read=86376 bytes_retransmit=9 bytes_invalid=0 send_seq=2143 receive_seq=2143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.0 pwm=0.246 raspberry_pi: temp=39.5 mcu_temp: temp=27.8  sysload=0.39 cputime=33.297 memavail=723620 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 637.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27642 bytes_read=86625 bytes_retransmit=9 bytes_invalid=0 send_seq=2149 receive_seq=2149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.0 pwm=0.302 raspberry_pi: temp=39.9 mcu_temp: temp=27.5  sysload=0.39 cputime=33.336 memavail=724076 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.467
Stats 638.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27711 bytes_read=86831 bytes_retransmit=9 bytes_invalid=0 send_seq=2155 receive_seq=2155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=60.0 pwm=0.243 raspberry_pi: temp=39.5 mcu_temp: temp=27.6  sysload=0.39 cputime=33.374 memavail=723680 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.467
Stats 639.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27775 bytes_read=87032 bytes_retransmit=9 bytes_invalid=0 send_seq=2160 receive_seq=2160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.0 pwm=0.243 raspberry_pi: temp=39.8 mcu_temp: temp=27.8  sysload=0.39 cputime=33.411 memavail=723680 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.517
Stats 640.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27828 bytes_read=87276 bytes_retransmit=9 bytes_invalid=0 send_seq=2165 receive_seq=2165 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996992 heater_bed: target=60 temp=60.0 pwm=0.243 raspberry_pi: temp=39.1 mcu_temp: temp=27.7  sysload=0.39 cputime=33.449 memavail=723432 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.517
Stats 641.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27881 bytes_read=87492 bytes_retransmit=9 bytes_invalid=0 send_seq=2170 receive_seq=2170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.0 pwm=0.243 raspberry_pi: temp=40.1 mcu_temp: temp=27.6  sysload=0.36 cputime=33.485 memavail=723180 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.517
Stats 642.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27950 bytes_read=87713 bytes_retransmit=9 bytes_invalid=0 send_seq=2176 receive_seq=2176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.0 pwm=0.228 raspberry_pi: temp=39.8 mcu_temp: temp=27.7  sysload=0.36 cputime=33.522 memavail=722964 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.517
Stats 643.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28030 bytes_read=87936 bytes_retransmit=9 bytes_invalid=0 send_seq=2182 receive_seq=2182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.0 pwm=0.321 raspberry_pi: temp=39.4 mcu_temp: temp=27.8  sysload=0.36 cputime=33.565 memavail=722964 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.490
Stats 644.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28110 bytes_read=88135 bytes_retransmit=9 bytes_invalid=0 send_seq=2188 receive_seq=2188 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=60.0 pwm=0.199 raspberry_pi: temp=40.2 mcu_temp: temp=27.8  sysload=0.36 cputime=33.602 memavail=722964 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.490
Stats 645.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28195 bytes_read=88361 bytes_retransmit=9 bytes_invalid=0 send_seq=2195 receive_seq=2195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.0 pwm=0.286 raspberry_pi: temp=40.0 mcu_temp: temp=27.8  sysload=0.36 cputime=33.640 memavail=722964 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.490
Stats 646.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28296 bytes_read=88620 bytes_retransmit=9 bytes_invalid=0 send_seq=2203 receive_seq=2203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.0 pwm=0.288 raspberry_pi: temp=40.1 mcu_temp: temp=27.7  sysload=0.41 cputime=33.680 memavail=722964 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.490
Stats 647.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28365 bytes_read=88826 bytes_retransmit=9 bytes_invalid=0 send_seq=2209 receive_seq=2209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.0 pwm=0.288 raspberry_pi: temp=39.8 mcu_temp: temp=27.8  sysload=0.41 cputime=33.717 memavail=723048 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.455
Stats 648.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28450 bytes_read=89052 bytes_retransmit=9 bytes_invalid=0 send_seq=2216 receive_seq=2216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.0 pwm=0.246 raspberry_pi: temp=39.9 mcu_temp: temp=28.0  sysload=0.41 cputime=33.754 memavail=722932 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.455
Stats 649.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28503 bytes_read=89281 bytes_retransmit=9 bytes_invalid=0 send_seq=2221 receive_seq=2221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.0 pwm=0.246 raspberry_pi: temp=39.8 mcu_temp: temp=27.8  sysload=0.41 cputime=33.792 memavail=722428 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.455
Stats 650.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28567 bytes_read=89482 bytes_retransmit=9 bytes_invalid=0 send_seq=2226 receive_seq=2226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.0 pwm=0.184 raspberry_pi: temp=39.7 mcu_temp: temp=27.9  sysload=0.41 cputime=33.828 memavail=722680 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.455
Stats 651.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28636 bytes_read=89718 bytes_retransmit=9 bytes_invalid=0 send_seq=2232 receive_seq=2232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.0 pwm=0.323 raspberry_pi: temp=39.4 mcu_temp: temp=27.9  sysload=0.46 cputime=33.869 memavail=721924 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.455
Stats 652.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28737 bytes_read=89962 bytes_retransmit=9 bytes_invalid=0 send_seq=2240 receive_seq=2240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=39.6 mcu_temp: temp=27.9  sysload=0.46 cputime=33.912 memavail=721168 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 653.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28790 bytes_read=90163 bytes_retransmit=9 bytes_invalid=0 send_seq=2245 receive_seq=2245 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=39.7 mcu_temp: temp=27.9  sysload=0.46 cputime=33.949 memavail=720672 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 654.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28843 bytes_read=90379 bytes_retransmit=9 bytes_invalid=0 send_seq=2250 receive_seq=2250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=39.3 mcu_temp: temp=27.9  sysload=0.46 cputime=33.986 memavail=720196 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 655.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28896 bytes_read=90608 bytes_retransmit=9 bytes_invalid=0 send_seq=2255 receive_seq=2255 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=39.4 mcu_temp: temp=27.9  sysload=0.46 cputime=34.023 memavail=719948 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 656.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28992 bytes_read=90834 bytes_retransmit=9 bytes_invalid=0 send_seq=2262 receive_seq=2262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=60.0 pwm=0.302 raspberry_pi: temp=39.5 mcu_temp: temp=28.0  sysload=0.42 cputime=34.061 memavail=719976 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 657.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29061 bytes_read=91055 bytes_retransmit=9 bytes_invalid=0 send_seq=2268 receive_seq=2268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 heater_bed: target=60 temp=60.0 pwm=0.245 raspberry_pi: temp=39.4 mcu_temp: temp=27.9  sysload=0.42 cputime=34.099 memavail=720032 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 658.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29146 bytes_read=91294 bytes_retransmit=9 bytes_invalid=0 send_seq=2275 receive_seq=2275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=60 temp=60.0 pwm=0.257 raspberry_pi: temp=39.0 mcu_temp: temp=27.9  sysload=0.42 cputime=34.138 memavail=720504 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 659.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29226 bytes_read=91500 bytes_retransmit=9 bytes_invalid=0 send_seq=2281 receive_seq=2281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=60 temp=60.0 pwm=0.285 raspberry_pi: temp=40.1 mcu_temp: temp=27.9  sysload=0.42 cputime=34.177 memavail=720304 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 660.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29338 bytes_read=91731 bytes_retransmit=9 bytes_invalid=0 send_seq=2289 receive_seq=2289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=60 temp=60.0 pwm=0.231 raspberry_pi: temp=39.7 mcu_temp: temp=28.0  sysload=0.42 cputime=34.216 memavail=720056 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.515
Stats 661.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29407 bytes_read=91980 bytes_retransmit=9 bytes_invalid=0 send_seq=2295 receive_seq=2295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=60.0 pwm=0.291 raspberry_pi: temp=39.7 mcu_temp: temp=28.1  sysload=0.39 cputime=34.256 memavail=720356 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.515
Stats 662.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29476 bytes_read=92186 bytes_retransmit=9 bytes_invalid=0 send_seq=2301 receive_seq=2301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=60.0 pwm=0.188 raspberry_pi: temp=39.6 mcu_temp: temp=27.9  sysload=0.39 cputime=34.294 memavail=719860 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.515
Stats 663.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29545 bytes_read=92407 bytes_retransmit=9 bytes_invalid=0 send_seq=2307 receive_seq=2307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=39.5 mcu_temp: temp=27.9  sysload=0.39 cputime=34.332 memavail=718676 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.515
Stats 664.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29598 bytes_read=92636 bytes_retransmit=9 bytes_invalid=0 send_seq=2312 receive_seq=2312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=40.2 mcu_temp: temp=28.0  sysload=0.39 cputime=34.370 memavail=719180 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 665.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29667 bytes_read=92842 bytes_retransmit=9 bytes_invalid=0 send_seq=2318 receive_seq=2318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=40.2 mcu_temp: temp=28.1  sysload=0.39 cputime=34.407 memavail=718928 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 666.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29720 bytes_read=93073 bytes_retransmit=9 bytes_invalid=0 send_seq=2323 receive_seq=2323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=39.8 mcu_temp: temp=28.1  sysload=0.36 cputime=34.445 memavail=719180 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 667.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29805 bytes_read=93312 bytes_retransmit=9 bytes_invalid=0 send_seq=2330 receive_seq=2330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.0 pwm=0.265 raspberry_pi: temp=39.9 mcu_temp: temp=28.0  sysload=0.36 cputime=34.485 memavail=719948 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 668.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29880 bytes_read=93510 bytes_retransmit=9 bytes_invalid=0 send_seq=2335 receive_seq=2335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=60.0 pwm=0.278 raspberry_pi: temp=39.8 mcu_temp: temp=28.1  sysload=0.36 cputime=34.522 memavail=719896 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 669.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29944 bytes_read=93715 bytes_retransmit=9 bytes_invalid=0 send_seq=2340 receive_seq=2340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=40.3 mcu_temp: temp=28.1  sysload=0.36 cputime=34.559 memavail=720220 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 670.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30029 bytes_read=93951 bytes_retransmit=9 bytes_invalid=0 send_seq=2347 receive_seq=2347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.0 pwm=0.287 raspberry_pi: temp=40.6 mcu_temp: temp=28.1  sysload=0.36 cputime=34.599 memavail=720744 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 671.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30109 bytes_read=94172 bytes_retransmit=9 bytes_invalid=0 send_seq=2353 receive_seq=2353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=60 temp=60.0 pwm=0.266 raspberry_pi: temp=40.5 mcu_temp: temp=28.2  sysload=0.33 cputime=34.636 memavail=721000 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 672.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30162 bytes_read=94388 bytes_retransmit=9 bytes_invalid=0 send_seq=2358 receive_seq=2358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.0 pwm=0.266 raspberry_pi: temp=40.1 mcu_temp: temp=28.1  sysload=0.33 cputime=34.673 memavail=721260 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 673.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30263 bytes_read=94632 bytes_retransmit=9 bytes_invalid=0 send_seq=2366 receive_seq=2366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=40.0 mcu_temp: temp=28.2  sysload=0.33 cputime=34.712 memavail=720072 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.448
Stats 674.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30316 bytes_read=94833 bytes_retransmit=9 bytes_invalid=0 send_seq=2371 receive_seq=2371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996990 heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=40.2 mcu_temp: temp=28.1  sysload=0.33 cputime=34.748 memavail=721080 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.448
Stats 675.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30385 bytes_read=95068 bytes_retransmit=9 bytes_invalid=0 send_seq=2377 receive_seq=2377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.0 pwm=0.291 raspberry_pi: temp=39.8 mcu_temp: temp=28.3  sysload=0.33 cputime=34.786 memavail=721080 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.448
Stats 676.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30454 bytes_read=95303 bytes_retransmit=9 bytes_invalid=0 send_seq=2383 receive_seq=2383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=39.8 mcu_temp: temp=28.2  sysload=0.30 cputime=34.824 memavail=720620 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.448
Stats 677.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30539 bytes_read=95514 bytes_retransmit=9 bytes_invalid=0 send_seq=2390 receive_seq=2390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 heater_bed: target=60 temp=60.0 pwm=0.278 raspberry_pi: temp=40.0 mcu_temp: temp=28.1  sysload=0.30 cputime=34.861 memavail=720216 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 678.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30646 bytes_read=95775 bytes_retransmit=9 bytes_invalid=0 send_seq=2399 receive_seq=2399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=60 temp=60.0 pwm=0.199 raspberry_pi: temp=39.9 mcu_temp: temp=28.3  sysload=0.30 cputime=34.905 memavail=721004 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 679.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30715 bytes_read=95995 bytes_retransmit=9 bytes_invalid=0 send_seq=2405 receive_seq=2405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=60.0 pwm=0.288 raspberry_pi: temp=40.1 mcu_temp: temp=28.3  sysload=0.30 cputime=34.946 memavail=721644 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.462
Stats 680.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30800 bytes_read=96206 bytes_retransmit=9 bytes_invalid=0 send_seq=2412 receive_seq=2412 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=60.0 pwm=0.281 raspberry_pi: temp=40.1 mcu_temp: temp=28.1  sysload=0.30 cputime=34.983 memavail=721644 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.462
Stats 681.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30917 bytes_read=96471 bytes_retransmit=9 bytes_invalid=0 send_seq=2421 receive_seq=2421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996974 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=39.7 mcu_temp: temp=28.2  sysload=0.28 cputime=35.022 memavail=721900 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.519
Stats 682.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30986 bytes_read=96691 bytes_retransmit=9 bytes_invalid=0 send_seq=2427 receive_seq=2427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996974 heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=39.8 mcu_temp: temp=28.3  sysload=0.28 cputime=35.059 memavail=721396 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.519
Stats 683.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31055 bytes_read=96897 bytes_retransmit=9 bytes_invalid=0 send_seq=2433 receive_seq=2433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.0 pwm=0.275 raspberry_pi: temp=40.0 mcu_temp: temp=28.3  sysload=0.28 cputime=35.101 memavail=722008 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.519
Stats 684.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31108 bytes_read=97127 bytes_retransmit=9 bytes_invalid=0 send_seq=2438 receive_seq=2438 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.0 pwm=0.275 raspberry_pi: temp=40.5 mcu_temp: temp=28.2  sysload=0.28 cputime=35.138 memavail=721984 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.519
Stats 685.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31204 bytes_read=97352 bytes_retransmit=9 bytes_invalid=0 send_seq=2445 receive_seq=2445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.0 pwm=0.206 raspberry_pi: temp=40.0 mcu_temp: temp=28.1  sysload=0.28 cputime=35.176 memavail=722392 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.483
Stats 686.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31289 bytes_read=97578 bytes_retransmit=9 bytes_invalid=0 send_seq=2452 receive_seq=2452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996972 heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=40.2 mcu_temp: temp=28.1  sysload=0.26 cputime=35.213 memavail=722592 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 687.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31390 bytes_read=97823 bytes_retransmit=9 bytes_invalid=0 send_seq=2460 receive_seq=2460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996971 heater_bed: target=60 temp=60.0 pwm=0.289 raspberry_pi: temp=40.3 mcu_temp: temp=28.3  sysload=0.26 cputime=35.254 memavail=722144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 688.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31459 bytes_read=98043 bytes_retransmit=9 bytes_invalid=0 send_seq=2466 receive_seq=2466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=40.2 mcu_temp: temp=28.4  sysload=0.26 cputime=35.292 memavail=722144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 689.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31560 bytes_read=98259 bytes_retransmit=9 bytes_invalid=0 send_seq=2474 receive_seq=2474 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.284 raspberry_pi: temp=40.6 mcu_temp: temp=28.3  sysload=0.26 cputime=35.330 memavail=722144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.461
Stats 690.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31629 bytes_read=98494 bytes_retransmit=9 bytes_invalid=0 send_seq=2480 receive_seq=2480 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=40.4 mcu_temp: temp=28.4  sysload=0.26 cputime=35.368 memavail=721920 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.461
Stats 691.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31698 bytes_read=98729 bytes_retransmit=9 bytes_invalid=0 send_seq=2486 receive_seq=2486 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.255 raspberry_pi: temp=40.4 mcu_temp: temp=28.4  sysload=0.32 cputime=35.406 memavail=722176 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.461
Stats 692.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31751 bytes_read=98930 bytes_retransmit=9 bytes_invalid=0 send_seq=2491 receive_seq=2491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996969 heater_bed: target=60 temp=60.0 pwm=0.255 raspberry_pi: temp=40.1 mcu_temp: temp=28.5  sysload=0.32 cputime=35.446 memavail=722188 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.461
Stats 693.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31847 bytes_read=99170 bytes_retransmit=9 bytes_invalid=0 send_seq=2498 receive_seq=2498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=40.1 mcu_temp: temp=28.3  sysload=0.32 cputime=35.485 memavail=721512 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 694.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31916 bytes_read=99380 bytes_retransmit=9 bytes_invalid=0 send_seq=2504 receive_seq=2504 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.298 raspberry_pi: temp=40.7 mcu_temp: temp=28.5  sysload=0.32 cputime=35.522 memavail=721264 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 695.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32001 bytes_read=99584 bytes_retransmit=9 bytes_invalid=0 send_seq=2511 receive_seq=2511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.259 raspberry_pi: temp=39.9 mcu_temp: temp=28.2  sysload=0.32 cputime=35.561 memavail=721268 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 696.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32070 bytes_read=99834 bytes_retransmit=9 bytes_invalid=0 send_seq=2517 receive_seq=2517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996971 heater_bed: target=60 temp=60.0 pwm=0.193 raspberry_pi: temp=39.6 mcu_temp: temp=28.3  sysload=0.29 cputime=35.602 memavail=721268 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 697.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32155 bytes_read=100059 bytes_retransmit=9 bytes_invalid=0 send_seq=2524 receive_seq=2524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996971 heater_bed: target=60 temp=60.0 pwm=0.295 raspberry_pi: temp=39.8 mcu_temp: temp=28.4  sysload=0.29 cputime=35.640 memavail=720764 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.526
Stats 698.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32224 bytes_read=100265 bytes_retransmit=9 bytes_invalid=0 send_seq=2530 receive_seq=2530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996969 heater_bed: target=60 temp=60.0 pwm=0.295 raspberry_pi: temp=40.2 mcu_temp: temp=28.3  sysload=0.29 cputime=35.677 memavail=720268 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 699.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32309 bytes_read=100505 bytes_retransmit=9 bytes_invalid=0 send_seq=2537 receive_seq=2537 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=60 temp=60.0 pwm=0.147 raspberry_pi: temp=40.4 mcu_temp: temp=28.3  sysload=0.29 cputime=35.716 memavail=720268 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 700.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32378 bytes_read=100725 bytes_retransmit=9 bytes_invalid=0 send_seq=2543 receive_seq=2543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996965 heater_bed: target=60 temp=60.0 pwm=0.257 raspberry_pi: temp=40.1 mcu_temp: temp=28.1  sysload=0.29 cputime=35.753 memavail=720268 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 701.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32458 bytes_read=100946 bytes_retransmit=9 bytes_invalid=0 send_seq=2549 receive_seq=2549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996964 heater_bed: target=60 temp=60.0 pwm=0.254 raspberry_pi: temp=40.0 mcu_temp: temp=28.4  sysload=0.27 cputime=35.792 memavail=720548 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.465
Stats 702.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32527 bytes_read=101181 bytes_retransmit=9 bytes_invalid=0 send_seq=2555 receive_seq=2555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=60 temp=60.0 pwm=0.254 raspberry_pi: temp=40.0 mcu_temp: temp=28.3  sysload=0.27 cputime=35.829 memavail=720296 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.502
Stats 703.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32596 bytes_read=101401 bytes_retransmit=9 bytes_invalid=0 send_seq=2561 receive_seq=2561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=40.0 mcu_temp: temp=28.4  sysload=0.27 cputime=35.868 memavail=719580 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.502
Stats 704.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32660 bytes_read=101602 bytes_retransmit=9 bytes_invalid=0 send_seq=2566 receive_seq=2566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.268 raspberry_pi: temp=40.5 mcu_temp: temp=28.3  sysload=0.27 cputime=35.904 memavail=719580 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.502
Stats 705.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32745 bytes_read=101856 bytes_retransmit=9 bytes_invalid=0 send_seq=2573 receive_seq=2573 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=40.4 mcu_temp: temp=28.6  sysload=0.27 cputime=35.944 memavail=719580 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.502
Stats 706.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=32846 bytes_read=102087 bytes_retransmit=9 bytes_invalid=0 send_seq=2581 receive_seq=2581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.221 raspberry_pi: temp=40.2 mcu_temp: temp=28.4  sysload=0.25 cputime=35.981 memavail=719580 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.497
Stats 707.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=32926 bytes_read=102293 bytes_retransmit=9 bytes_invalid=0 send_seq=2587 receive_seq=2587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=40.3 mcu_temp: temp=28.6  sysload=0.25 cputime=36.018 memavail=719580 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.497
Stats 708.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=33011 bytes_read=102547 bytes_retransmit=9 bytes_invalid=0 send_seq=2594 receive_seq=2594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=40.3 mcu_temp: temp=28.6  sysload=0.25 cputime=36.058 memavail=719140 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.497
Stats 709.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=33080 bytes_read=102753 bytes_retransmit=9 bytes_invalid=0 send_seq=2600 receive_seq=2600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.281 raspberry_pi: temp=40.6 mcu_temp: temp=28.5  sysload=0.25 cputime=36.096 memavail=719140 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.497
Stats 710.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=33165 bytes_read=102964 bytes_retransmit=9 bytes_invalid=0 send_seq=2607 receive_seq=2607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=40.2 mcu_temp: temp=28.5  sysload=0.25 cputime=36.134 memavail=719140 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.446
Stats 711.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33234 bytes_read=103228 bytes_retransmit=9 bytes_invalid=0 send_seq=2613 receive_seq=2613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.267 raspberry_pi: temp=40.1 mcu_temp: temp=28.5  sysload=0.23 cputime=36.173 memavail=719144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.446
Stats 712.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33314 bytes_read=103434 bytes_retransmit=9 bytes_invalid=0 send_seq=2619 receive_seq=2619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=40.6 mcu_temp: temp=28.5  sysload=0.23 cputime=36.210 memavail=718892 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.446
Stats 713.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33367 bytes_read=103650 bytes_retransmit=9 bytes_invalid=0 send_seq=2624 receive_seq=2624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=40.4 mcu_temp: temp=28.5  sysload=0.23 cputime=36.250 memavail=719100 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.446
Stats 714.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33420 bytes_read=103879 bytes_retransmit=9 bytes_invalid=0 send_seq=2629 receive_seq=2629 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=40.5 mcu_temp: temp=28.5  sysload=0.23 cputime=36.288 memavail=719236 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 715.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33500 bytes_read=104085 bytes_retransmit=9 bytes_invalid=0 send_seq=2635 receive_seq=2635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.283 raspberry_pi: temp=40.7 mcu_temp: temp=28.4  sysload=0.23 cputime=36.326 memavail=719284 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 716.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33569 bytes_read=104321 bytes_retransmit=9 bytes_invalid=0 send_seq=2641 receive_seq=2641 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=40.4 mcu_temp: temp=28.5  sysload=0.21 cputime=36.363 memavail=719072 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 717.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33622 bytes_read=104550 bytes_retransmit=9 bytes_invalid=0 send_seq=2646 receive_seq=2646 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=40.4 mcu_temp: temp=28.5  sysload=0.21 cputime=36.402 memavail=719576 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.517
Stats 718.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33702 bytes_read=104756 bytes_retransmit=9 bytes_invalid=0 send_seq=2652 receive_seq=2652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=60.0 pwm=0.277 raspberry_pi: temp=40.3 mcu_temp: temp=28.5  sysload=0.21 cputime=36.439 memavail=717884 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.517
Stats 719.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33771 bytes_read=104973 bytes_retransmit=9 bytes_invalid=0 send_seq=2658 receive_seq=2658 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.282 raspberry_pi: temp=41.0 mcu_temp: temp=28.3  sysload=0.21 cputime=36.477 memavail=717844 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.517
Stats 720.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33883 bytes_read=105205 bytes_retransmit=9 bytes_invalid=0 send_seq=2666 receive_seq=2666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996962 heater_bed: target=60 temp=60.0 pwm=0.151 raspberry_pi: temp=40.4 mcu_temp: temp=28.6  sysload=0.21 cputime=36.516 memavail=717656 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.517
Stats 721.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=33947 bytes_read=105418 bytes_retransmit=9 bytes_invalid=0 send_seq=2671 receive_seq=2671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=40.1 mcu_temp: temp=28.5  sysload=0.19 cputime=36.554 memavail=717584 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.517
Stats 722.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=34048 bytes_read=105649 bytes_retransmit=9 bytes_invalid=0 send_seq=2679 receive_seq=2679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=40.5 mcu_temp: temp=28.5  sysload=0.19 cputime=36.592 memavail=717412 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.436
Stats 723.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=34149 bytes_read=105893 bytes_retransmit=9 bytes_invalid=0 send_seq=2687 receive_seq=2687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=40.8 mcu_temp: temp=28.5  sysload=0.19 cputime=36.632 memavail=718164 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 724.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=34240 bytes_read=106099 bytes_retransmit=9 bytes_invalid=0 send_seq=2693 receive_seq=2693 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.255 raspberry_pi: temp=40.5 mcu_temp: temp=28.6  sysload=0.19 cputime=36.670 memavail=718212 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 725.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=34325 bytes_read=106325 bytes_retransmit=9 bytes_invalid=0 send_seq=2700 receive_seq=2700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.259 raspberry_pi: temp=40.2 mcu_temp: temp=28.6  sysload=0.19 cputime=36.709 memavail=717988 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 726.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=34389 bytes_read=106569 bytes_retransmit=9 bytes_invalid=0 send_seq=2705 receive_seq=2705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.259 raspberry_pi: temp=40.9 mcu_temp: temp=28.5  sysload=0.17 cputime=36.748 memavail=717928 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 727.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=34458 bytes_read=106775 bytes_retransmit=9 bytes_invalid=0 send_seq=2711 receive_seq=2711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=41.0 mcu_temp: temp=28.6  sysload=0.17 cputime=36.785 memavail=718024 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 728.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=34575 bytes_read=107011 bytes_retransmit=9 bytes_invalid=0 send_seq=2720 receive_seq=2720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=40.6 mcu_temp: temp=28.7  sysload=0.17 cputime=36.827 memavail=717344 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 729.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=34660 bytes_read=107250 bytes_retransmit=9 bytes_invalid=0 send_seq=2727 receive_seq=2727 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.152 raspberry_pi: temp=40.9 mcu_temp: temp=28.8  sysload=0.17 cputime=36.869 memavail=717544 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 730.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=34745 bytes_read=107461 bytes_retransmit=9 bytes_invalid=0 send_seq=2734 receive_seq=2734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=40.6 mcu_temp: temp=28.6  sysload=0.17 cputime=36.911 memavail=717860 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 731.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34841 bytes_read=107702 bytes_retransmit=9 bytes_invalid=0 send_seq=2741 receive_seq=2741 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.312 raspberry_pi: temp=41.2 mcu_temp: temp=28.8  sysload=0.16 cputime=36.955 memavail=718312 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 732.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34958 bytes_read=107951 bytes_retransmit=9 bytes_invalid=0 send_seq=2750 receive_seq=2750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.199 raspberry_pi: temp=41.0 mcu_temp: temp=28.7  sysload=0.16 cputime=37.002 memavail=718392 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 733.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35038 bytes_read=108157 bytes_retransmit=9 bytes_invalid=0 send_seq=2756 receive_seq=2756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=41.5 mcu_temp: temp=28.6  sysload=0.16 cputime=37.045 memavail=718004 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 734.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35091 bytes_read=108373 bytes_retransmit=9 bytes_invalid=0 send_seq=2761 receive_seq=2761 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=41.8 mcu_temp: temp=28.6  sysload=0.16 cputime=37.089 memavail=718296 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 735.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35176 bytes_read=108612 bytes_retransmit=9 bytes_invalid=0 send_seq=2768 receive_seq=2768 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996965 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=41.3 mcu_temp: temp=28.7  sysload=0.16 cputime=37.134 memavail=718552 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 736.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35283 bytes_read=108859 bytes_retransmit=9 bytes_invalid=0 send_seq=2777 receive_seq=2777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=60 temp=60.0 pwm=0.260 raspberry_pi: temp=40.4 mcu_temp: temp=28.8  sysload=0.15 cputime=37.180 memavail=718804 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.494
Stats 737.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35379 bytes_read=109085 bytes_retransmit=9 bytes_invalid=0 send_seq=2784 receive_seq=2784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.0 pwm=0.271 raspberry_pi: temp=40.2 mcu_temp: temp=28.7  sysload=0.15 cputime=37.225 memavail=719560 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.494
Stats 738.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35448 bytes_read=109319 bytes_retransmit=9 bytes_invalid=0 send_seq=2790 receive_seq=2790 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=60 temp=60.0 pwm=0.168 raspberry_pi: temp=40.2 mcu_temp: temp=28.5  sysload=0.15 cputime=37.270 memavail=719380 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.494
Stats 739.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35528 bytes_read=109525 bytes_retransmit=9 bytes_invalid=0 send_seq=2796 receive_seq=2796 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=60.0 pwm=0.327 raspberry_pi: temp=40.6 mcu_temp: temp=28.5  sysload=0.15 cputime=37.313 memavail=719892 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.494
Stats 740.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35633 bytes_read=109770 bytes_retransmit=9 bytes_invalid=0 send_seq=2804 receive_seq=2804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167997000 heater_bed: target=60 temp=60.0 pwm=0.264 raspberry_pi: temp=40.6 mcu_temp: temp=28.7  sysload=0.15 cputime=37.360 memavail=720144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 741.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=35697 bytes_read=110000 bytes_retransmit=9 bytes_invalid=0 send_seq=2809 receive_seq=2809 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=40.2 mcu_temp: temp=28.9  sysload=0.14 cputime=37.404 memavail=719892 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 742.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=35793 bytes_read=110206 bytes_retransmit=9 bytes_invalid=0 send_seq=2816 receive_seq=2815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.0 pwm=0.216 raspberry_pi: temp=40.5 mcu_temp: temp=28.8  sysload=0.14 cputime=37.449 memavail=719892 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 743.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=35873 bytes_read=110441 bytes_retransmit=9 bytes_invalid=0 send_seq=2822 receive_seq=2821 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996992 heater_bed: target=60 temp=60.0 pwm=0.226 raspberry_pi: temp=40.7 mcu_temp: temp=28.8  sysload=0.14 cputime=37.494 memavail=719996 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 744.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=35980 bytes_read=110671 bytes_retransmit=9 bytes_invalid=0 send_seq=2829 receive_seq=2829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=40.6 mcu_temp: temp=28.6  sysload=0.14 cputime=37.539 memavail=720540 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.434
Stats 745.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36044 bytes_read=110858 bytes_retransmit=9 bytes_invalid=0 send_seq=2834 receive_seq=2833 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=40.7 mcu_temp: temp=28.8  sysload=0.14 cputime=37.581 memavail=720740 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.434
Stats 746.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=36140 bytes_read=111108 bytes_retransmit=9 bytes_invalid=0 send_seq=2841 receive_seq=2841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996990 heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=40.6 mcu_temp: temp=28.8  sysload=0.12 cputime=37.622 memavail=721064 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.434
Stats 747.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=36241 bytes_read=111338 bytes_retransmit=9 bytes_invalid=0 send_seq=2849 receive_seq=2849 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996988 heater_bed: target=60 temp=60.0 pwm=0.304 raspberry_pi: temp=40.2 mcu_temp: temp=28.7  sysload=0.12 cputime=37.662 memavail=720812 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.434
Stats 748.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=36342 bytes_read=111549 bytes_retransmit=9 bytes_invalid=0 send_seq=2856 receive_seq=2856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.0 pwm=0.231 raspberry_pi: temp=40.9 mcu_temp: temp=28.7  sysload=0.12 cputime=37.703 memavail=720224 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Stats 749.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=36417 bytes_read=111784 bytes_retransmit=9 bytes_invalid=0 send_seq=2862 receive_seq=2862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.0 pwm=0.214 raspberry_pi: temp=40.6 mcu_temp: temp=29.0  sysload=0.12 cputime=37.741 memavail=720300 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Stats 750.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=36502 bytes_read=112009 bytes_retransmit=9 bytes_invalid=0 send_seq=2869 receive_seq=2869 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=40.3 mcu_temp: temp=28.9  sysload=0.12 cputime=37.781 memavail=720564 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Stats 751.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36598 bytes_read=112235 bytes_retransmit=9 bytes_invalid=0 send_seq=2876 receive_seq=2876 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.0 pwm=0.312 raspberry_pi: temp=40.3 mcu_temp: temp=29.0  sysload=0.19 cputime=37.820 memavail=720584 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.486
Stats 752.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36710 bytes_read=112480 bytes_retransmit=9 bytes_invalid=0 send_seq=2884 receive_seq=2884 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996993 heater_bed: target=60 temp=60.0 pwm=0.293 raspberry_pi: temp=40.6 mcu_temp: temp=29.0  sysload=0.19 cputime=37.860 memavail=720336 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 753.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36774 bytes_read=112690 bytes_retransmit=9 bytes_invalid=0 send_seq=2889 receive_seq=2888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167997001 heater_bed: target=60 temp=60.0 pwm=0.168 raspberry_pi: temp=40.3 mcu_temp: temp=28.9  sysload=0.19 cputime=37.903 memavail=720952 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 754.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36854 bytes_read=112901 bytes_retransmit=9 bytes_invalid=0 send_seq=2895 receive_seq=2895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.0 pwm=0.235 raspberry_pi: temp=40.3 mcu_temp: temp=29.0  sysload=0.19 cputime=37.945 memavail=720460 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 755.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36945 bytes_read=113136 bytes_retransmit=9 bytes_invalid=0 send_seq=2901 receive_seq=2901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.0 pwm=0.195 raspberry_pi: temp=40.9 mcu_temp: temp=29.0  sysload=0.19 cputime=37.984 memavail=720460 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 756.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37036 bytes_read=113366 bytes_retransmit=9 bytes_invalid=0 send_seq=2907 receive_seq=2906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.0 pwm=0.323 raspberry_pi: temp=40.3 mcu_temp: temp=28.9  sysload=0.18 cputime=38.023 memavail=720436 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.496
Stats 757.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37100 bytes_read=113567 bytes_retransmit=9 bytes_invalid=0 send_seq=2912 receive_seq=2911 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996997 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=40.3 mcu_temp: temp=28.8  sysload=0.18 cputime=38.061 memavail=720488 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.496
Stats 758.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37180 bytes_read=113802 bytes_retransmit=9 bytes_invalid=0 send_seq=2918 receive_seq=2917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996994 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=40.8 mcu_temp: temp=28.9  sysload=0.18 cputime=38.099 memavail=720024 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.496
Stats 759.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37244 bytes_read=114017 bytes_retransmit=9 bytes_invalid=0 send_seq=2923 receive_seq=2922 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996990 heater_bed: target=60 temp=60.0 pwm=0.294 raspberry_pi: temp=40.7 mcu_temp: temp=29.0  sysload=0.18 cputime=38.136 memavail=719784 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.496
Stats 760.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37324 bytes_read=114228 bytes_retransmit=9 bytes_invalid=0 send_seq=2929 receive_seq=2929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996987 heater_bed: target=60 temp=60.0 pwm=0.176 raspberry_pi: temp=41.1 mcu_temp: temp=29.0  sysload=0.18 cputime=38.174 memavail=719784 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 761.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37435 bytes_read=114497 bytes_retransmit=9 bytes_invalid=0 send_seq=2937 receive_seq=2936 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.0 pwm=0.069 raspberry_pi: temp=41.0 mcu_temp: temp=28.8  sysload=0.16 cputime=38.213 memavail=719784 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 762.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37510 bytes_read=114698 bytes_retransmit=9 bytes_invalid=0 send_seq=2942 receive_seq=2941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996985 heater_bed: target=60 temp=60.0 pwm=0.327 raspberry_pi: temp=40.2 mcu_temp: temp=29.0  sysload=0.16 cputime=38.250 memavail=719308 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 763.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37574 bytes_read=114899 bytes_retransmit=9 bytes_invalid=0 send_seq=2947 receive_seq=2946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996982 heater_bed: target=60 temp=60.0 pwm=0.275 raspberry_pi: temp=40.4 mcu_temp: temp=28.8  sysload=0.16 cputime=38.287 memavail=720076 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.471
Stats 764.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37649 bytes_read=115148 bytes_retransmit=9 bytes_invalid=0 send_seq=2952 receive_seq=2952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.0 pwm=0.260 raspberry_pi: temp=41.4 mcu_temp: temp=29.1  sysload=0.16 cputime=38.326 memavail=720100 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.430
Stats 765.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=37740 bytes_read=115349 bytes_retransmit=9 bytes_invalid=0 send_seq=2958 receive_seq=2957 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=41.3 mcu_temp: temp=28.9  sysload=0.16 cputime=38.364 memavail=719852 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.430
Stats 766.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=37804 bytes_read=115565 bytes_retransmit=9 bytes_invalid=0 send_seq=2963 receive_seq=2962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.226 raspberry_pi: temp=40.7 mcu_temp: temp=29.1  sysload=0.15 cputime=38.400 memavail=719980 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.430
Stats 767.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=37916 bytes_read=115824 bytes_retransmit=9 bytes_invalid=0 send_seq=2971 receive_seq=2970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996965 heater_bed: target=60 temp=60.0 pwm=0.283 raspberry_pi: temp=41.5 mcu_temp: temp=28.9  sysload=0.15 cputime=38.439 memavail=719728 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 768.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=37980 bytes_read=116030 bytes_retransmit=9 bytes_invalid=0 send_seq=2976 receive_seq=2976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996965 heater_bed: target=60 temp=60.0 pwm=0.221 raspberry_pi: temp=40.9 mcu_temp: temp=29.0  sysload=0.15 cputime=38.475 memavail=718816 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 769.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=38060 bytes_read=116251 bytes_retransmit=9 bytes_invalid=0 send_seq=2982 receive_seq=2982 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996963 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=40.8 mcu_temp: temp=29.0  sysload=0.15 cputime=38.514 memavail=718324 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 770.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=38167 bytes_read=116486 bytes_retransmit=9 bytes_invalid=0 send_seq=2989 receive_seq=2989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=60.0 pwm=0.315 raspberry_pi: temp=41.0 mcu_temp: temp=29.0  sysload=0.15 cputime=38.552 memavail=718324 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 771.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=38247 bytes_read=116677 bytes_retransmit=9 bytes_invalid=0 send_seq=2995 receive_seq=2994 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.189 raspberry_pi: temp=40.7 mcu_temp: temp=29.0  sysload=0.14 cputime=38.590 memavail=718324 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.475
Stats 772.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=38327 bytes_read=116909 bytes_retransmit=9 bytes_invalid=0 send_seq=3001 receive_seq=3000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=40.3 mcu_temp: temp=29.0  sysload=0.14 cputime=38.629 memavail=718324 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.475
Stats 773.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=38423 bytes_read=117148 bytes_retransmit=9 bytes_invalid=0 send_seq=3008 receive_seq=3007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.284 raspberry_pi: temp=40.9 mcu_temp: temp=29.0  sysload=0.14 cputime=38.668 memavail=717384 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.475
Stats 774.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=38503 bytes_read=117354 bytes_retransmit=9 bytes_invalid=0 send_seq=3014 receive_seq=3013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=41.5 mcu_temp: temp=29.0  sysload=0.14 cputime=38.707 memavail=717140 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.475
Stats 775.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=38599 bytes_read=117580 bytes_retransmit=9 bytes_invalid=0 send_seq=3021 receive_seq=3020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=41.2 mcu_temp: temp=29.0  sysload=0.14 cputime=38.744 memavail=717144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.508
Stats 776.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=38674 bytes_read=117809 bytes_retransmit=9 bytes_invalid=0 send_seq=3026 receive_seq=3025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=41.0 mcu_temp: temp=29.1  sysload=0.13 cputime=38.783 memavail=717144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 777.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=38754 bytes_read=118030 bytes_retransmit=9 bytes_invalid=0 send_seq=3032 receive_seq=3031 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=40.8 mcu_temp: temp=29.0  sysload=0.13 cputime=38.820 memavail=717144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.508
Stats 778.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=38829 bytes_read=118246 bytes_retransmit=9 bytes_invalid=0 send_seq=3037 receive_seq=3036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=41.1 mcu_temp: temp=29.0  sysload=0.13 cputime=38.857 memavail=717144 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 779.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=38925 bytes_read=118490 bytes_retransmit=9 bytes_invalid=0 send_seq=3044 receive_seq=3044 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=41.2 mcu_temp: temp=29.0  sysload=0.13 cputime=38.895 memavail=717180 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.505
Stats 780.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=39005 bytes_read=118691 bytes_retransmit=9 bytes_invalid=0 send_seq=3050 receive_seq=3049 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=40.7 mcu_temp: temp=29.1  sysload=0.13 cputime=38.932 memavail=717180 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.505
Stats 781.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=39085 bytes_read=118912 bytes_retransmit=9 bytes_invalid=0 send_seq=3056 receive_seq=3055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=41.0 mcu_temp: temp=29.0  sysload=0.12 cputime=38.969 memavail=717180 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.440
Stats 782.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39165 bytes_read=119161 bytes_retransmit=9 bytes_invalid=0 send_seq=3062 receive_seq=3061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=41.1 mcu_temp: temp=29.1  sysload=0.12 cputime=39.008 memavail=717184 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.440
Stats 783.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39224 bytes_read=119357 bytes_retransmit=9 bytes_invalid=0 send_seq=3066 receive_seq=3065 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=40.9 mcu_temp: temp=29.0  sysload=0.12 cputime=39.044 memavail=717960 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.440
Stats 784.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39315 bytes_read=119578 bytes_retransmit=9 bytes_invalid=0 send_seq=3072 receive_seq=3071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=41.2 mcu_temp: temp=29.1  sysload=0.12 cputime=39.085 memavail=717720 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.440
Stats 785.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39374 bytes_read=119802 bytes_retransmit=9 bytes_invalid=0 send_seq=3076 receive_seq=3075 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=41.5 mcu_temp: temp=29.2  sysload=0.12 cputime=39.123 memavail=717720 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.499
Stats 786.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39422 bytes_read=119998 bytes_retransmit=9 bytes_invalid=0 send_seq=3080 receive_seq=3079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=40.8 mcu_temp: temp=29.0  sysload=0.11 cputime=39.159 memavail=717720 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.499
Stats 787.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39497 bytes_read=120229 bytes_retransmit=9 bytes_invalid=0 send_seq=3085 receive_seq=3084 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=41.4 mcu_temp: temp=29.2  sysload=0.11 cputime=39.196 memavail=717472 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.499
Stats 788.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39556 bytes_read=120458 bytes_retransmit=9 bytes_invalid=0 send_seq=3089 receive_seq=3089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=41.1 mcu_temp: temp=29.2  sysload=0.11 cputime=39.234 memavail=718204 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.437
Stats 789.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39668 bytes_read=120669 bytes_retransmit=9 bytes_invalid=0 send_seq=3097 receive_seq=3096 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=41.3 mcu_temp: temp=29.1  sysload=0.11 cputime=39.274 memavail=718228 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.497
Stats 790.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39743 bytes_read=120885 bytes_retransmit=9 bytes_invalid=0 send_seq=3102 receive_seq=3101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.196 raspberry_pi: temp=41.4 mcu_temp: temp=29.2  sysload=0.11 cputime=39.311 memavail=718184 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.497
Stats 791.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39823 bytes_read=121139 bytes_retransmit=9 bytes_invalid=0 send_seq=3108 receive_seq=3108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=41.0 mcu_temp: temp=29.4  sysload=0.10 cputime=39.350 memavail=718244 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.497
Stats 792.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39887 bytes_read=121340 bytes_retransmit=9 bytes_invalid=0 send_seq=3113 receive_seq=3113 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.291 raspberry_pi: temp=40.8 mcu_temp: temp=29.2  sysload=0.10 cputime=39.386 memavail=717992 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.497
Stats 793.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=39951 bytes_read=121551 bytes_retransmit=9 bytes_invalid=0 send_seq=3118 receive_seq=3117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.233 raspberry_pi: temp=41.3 mcu_temp: temp=29.4  sysload=0.10 cputime=39.424 memavail=717052 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.497
Stats 794.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40058 bytes_read=121795 bytes_retransmit=9 bytes_invalid=0 send_seq=3126 receive_seq=3125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.207 raspberry_pi: temp=40.9 mcu_temp: temp=29.2  sysload=0.10 cputime=39.462 memavail=717008 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 795.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40117 bytes_read=122007 bytes_retransmit=9 bytes_invalid=0 send_seq=3131 receive_seq=3130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=41.1 mcu_temp: temp=29.2  sysload=0.10 cputime=39.500 memavail=717320 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 796.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40165 bytes_read=122210 bytes_retransmit=9 bytes_invalid=0 send_seq=3135 receive_seq=3134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=41.0 mcu_temp: temp=29.2  sysload=0.09 cputime=39.536 memavail=717320 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 797.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40261 bytes_read=122455 bytes_retransmit=9 bytes_invalid=0 send_seq=3142 receive_seq=3141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996934 heater_bed: target=60 temp=60.0 pwm=0.228 raspberry_pi: temp=41.3 mcu_temp: temp=29.2  sysload=0.09 cputime=39.575 memavail=717068 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 798.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40325 bytes_read=122656 bytes_retransmit=9 bytes_invalid=0 send_seq=3147 receive_seq=3146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.228 raspberry_pi: temp=41.7 mcu_temp: temp=29.3  sysload=0.09 cputime=39.612 memavail=717644 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.430
Stats 799.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40400 bytes_read=122872 bytes_retransmit=9 bytes_invalid=0 send_seq=3152 receive_seq=3151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=41.3 mcu_temp: temp=29.3  sysload=0.09 cputime=39.650 memavail=717392 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.430
Stats 800.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40491 bytes_read=123106 bytes_retransmit=9 bytes_invalid=0 send_seq=3158 receive_seq=3157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=41.4 mcu_temp: temp=28.9  sysload=0.09 cputime=39.689 memavail=717652 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 801.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40587 bytes_read=123332 bytes_retransmit=9 bytes_invalid=0 send_seq=3165 receive_seq=3164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.240 raspberry_pi: temp=41.6 mcu_temp: temp=29.1  sysload=0.08 cputime=39.727 memavail=717400 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 802.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=40635 bytes_read=123548 bytes_retransmit=9 bytes_invalid=0 send_seq=3169 receive_seq=3169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.240 raspberry_pi: temp=41.7 mcu_temp: temp=29.3  sysload=0.08 cputime=39.764 memavail=717848 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 803.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=40715 bytes_read=123777 bytes_retransmit=9 bytes_invalid=0 send_seq=3175 receive_seq=3174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.195 raspberry_pi: temp=41.1 mcu_temp: temp=29.3  sysload=0.08 cputime=39.803 memavail=716968 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 804.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=40795 bytes_read=123988 bytes_retransmit=9 bytes_invalid=0 send_seq=3181 receive_seq=3181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.250 raspberry_pi: temp=41.7 mcu_temp: temp=29.4  sysload=0.08 cputime=39.844 memavail=716696 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.475
Stats 805.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=40870 bytes_read=124213 bytes_retransmit=9 bytes_invalid=0 send_seq=3186 receive_seq=3185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.253 raspberry_pi: temp=41.8 mcu_temp: temp=29.3  sysload=0.08 cputime=39.882 memavail=716756 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.475
Stats 806.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=40918 bytes_read=124423 bytes_retransmit=9 bytes_invalid=0 send_seq=3190 receive_seq=3189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.253 raspberry_pi: temp=41.9 mcu_temp: temp=29.2  sysload=0.08 cputime=39.920 memavail=716760 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.475
Stats 807.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=40998 bytes_read=124644 bytes_retransmit=9 bytes_invalid=0 send_seq=3196 receive_seq=3195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=41.3 mcu_temp: temp=29.2  sysload=0.08 cputime=39.958 memavail=717392 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.475
Stats 808.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41057 bytes_read=124869 bytes_retransmit=9 bytes_invalid=0 send_seq=3200 receive_seq=3199 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.08 cputime=39.995 memavail=716704 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 809.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41137 bytes_read=125089 bytes_retransmit=9 bytes_invalid=0 send_seq=3206 receive_seq=3205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=41.5 mcu_temp: temp=29.2  sysload=0.08 cputime=40.034 memavail=716712 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.433
Stats 810.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41201 bytes_read=125290 bytes_retransmit=9 bytes_invalid=0 send_seq=3211 receive_seq=3210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.08 cputime=40.070 memavail=717224 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.490
Stats 811.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41265 bytes_read=125520 bytes_retransmit=9 bytes_invalid=0 send_seq=3216 receive_seq=3215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.225 raspberry_pi: temp=40.7 mcu_temp: temp=29.2  sysload=0.07 cputime=40.107 memavail=717476 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.490
Stats 812.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41313 bytes_read=125745 bytes_retransmit=9 bytes_invalid=0 send_seq=3220 receive_seq=3219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.225 raspberry_pi: temp=41.3 mcu_temp: temp=29.4  sysload=0.07 cputime=40.144 memavail=717728 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.490
Stats 813.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41377 bytes_read=125946 bytes_retransmit=9 bytes_invalid=0 send_seq=3225 receive_seq=3224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.278 raspberry_pi: temp=41.4 mcu_temp: temp=29.5  sysload=0.07 cputime=40.181 memavail=716792 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.490
Stats 814.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41441 bytes_read=126181 bytes_retransmit=9 bytes_invalid=0 send_seq=3230 receive_seq=3230 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.278 raspberry_pi: temp=41.5 mcu_temp: temp=29.3  sysload=0.07 cputime=40.220 memavail=716488 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 815.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41505 bytes_read=126391 bytes_retransmit=9 bytes_invalid=0 send_seq=3235 receive_seq=3234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.07 cputime=40.258 memavail=717060 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 816.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41569 bytes_read=126592 bytes_retransmit=9 bytes_invalid=0 send_seq=3240 receive_seq=3239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.275 raspberry_pi: temp=41.4 mcu_temp: temp=29.4  sysload=0.06 cputime=40.294 memavail=717340 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 817.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41665 bytes_read=126852 bytes_retransmit=9 bytes_invalid=0 send_seq=3247 receive_seq=3247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.198 raspberry_pi: temp=41.5 mcu_temp: temp=29.5  sysload=0.06 cputime=40.333 memavail=717592 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 818.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41761 bytes_read=127072 bytes_retransmit=9 bytes_invalid=0 send_seq=3254 receive_seq=3253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.201 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.06 cputime=40.372 memavail=717340 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 819.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41825 bytes_read=127273 bytes_retransmit=9 bytes_invalid=0 send_seq=3259 receive_seq=3258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.275 raspberry_pi: temp=41.5 mcu_temp: temp=29.3  sysload=0.06 cputime=40.409 memavail=717596 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 820.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41889 bytes_read=127503 bytes_retransmit=9 bytes_invalid=0 send_seq=3264 receive_seq=3263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.06 cputime=40.447 memavail=718360 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 821.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=41953 bytes_read=127715 bytes_retransmit=9 bytes_invalid=0 send_seq=3269 receive_seq=3268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.271 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.06 cputime=40.485 memavail=718612 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.471
Stats 822.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=42017 bytes_read=127926 bytes_retransmit=9 bytes_invalid=0 send_seq=3274 receive_seq=3274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.06 cputime=40.523 memavail=718896 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.471
Stats 823.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=42113 bytes_read=128161 bytes_retransmit=9 bytes_invalid=0 send_seq=3281 receive_seq=3281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=40.9 mcu_temp: temp=29.5  sysload=0.06 cputime=40.561 memavail=717484 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 824.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=42161 bytes_read=128366 bytes_retransmit=9 bytes_invalid=0 send_seq=3285 receive_seq=3284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996958 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=41.5 mcu_temp: temp=29.3  sysload=0.06 cputime=40.598 memavail=717484 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 825.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=42209 bytes_read=128562 bytes_retransmit=9 bytes_invalid=0 send_seq=3289 receive_seq=3288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=41.7 mcu_temp: temp=29.5  sysload=0.06 cputime=40.634 memavail=716988 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 826.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=42289 bytes_read=128797 bytes_retransmit=9 bytes_invalid=0 send_seq=3295 receive_seq=3294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.201 raspberry_pi: temp=41.7 mcu_temp: temp=29.5  sysload=0.05 cputime=40.672 memavail=716988 print_time=364.749 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 827.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=42516 bytes_read=129062 bytes_retransmit=9 bytes_invalid=0 send_seq=3306 receive_seq=3306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=0 temp=60.0 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=29.3  sysload=0.05 cputime=40.721 memavail=717240 print_time=619.486 buffer_time=0.346 print_stall=0 extruder: target=0 temp=200.0 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473035407904: Disconnected
Restarting printer
Start printer at Fri May 19 01:21:34 2023 (1684459294.4 829.0)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 31.356
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473053958208: New connection
webhooks client 281473053958208: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 832.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=4625 bytes_read=6027 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=248 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=543 upcoming_bytes=70 freq=168058630 heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=0.0  sysload=0.13 cputime=43.714 memavail=718068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473053958208
webhooks: registering remote method 'reboot_machine' for connection id: 281473053958208
webhooks: registering remote method 'pause_job_queue' for connection id: 281473053958208
webhooks: registering remote method 'start_job_queue' for connection id: 281473053958208
Stats 833.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5322 bytes_read=6281 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=274 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=168008980 heater_bed: target=0 temp=59.6 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=29.4  sysload=0.13 cputime=43.778 memavail=718592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.8 pwm=0.000
Stats 834.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5365 bytes_read=6441 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=168001436 heater_bed: target=0 temp=59.5 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=29.4  sysload=0.13 cputime=43.821 memavail=718688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.1 pwm=0.000
Stats 835.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5390 bytes_read=6611 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997162 heater_bed: target=0 temp=59.4 pwm=0.000 raspberry_pi: temp=42.3 mcu_temp: temp=29.3  sysload=0.13 cputime=43.853 memavail=718448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.3 pwm=0.000
Stats 836.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5436 bytes_read=6804 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995870 heater_bed: target=0 temp=59.4 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=29.5  sysload=0.12 cputime=43.885 memavail=718448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.2 pwm=0.000
Stats 837.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5442 bytes_read=6949 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995884 heater_bed: target=0 temp=59.3 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=29.5  sysload=0.12 cputime=43.916 memavail=718448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.4 pwm=0.000
Stats 838.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=5486 bytes_read=7144 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996066 heater_bed: target=0 temp=59.2 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=29.4  sysload=0.12 cputime=43.950 memavail=718200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.5 pwm=0.000
Stats 839.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=5492 bytes_read=7317 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996172 heater_bed: target=0 temp=59.1 pwm=0.000 raspberry_pi: temp=42.0 mcu_temp: temp=29.5  sysload=0.12 cputime=43.981 memavail=718200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.3 pwm=0.000
Stats 840.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=5517 bytes_read=7472 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996281 heater_bed: target=0 temp=59.0 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=29.5  sysload=0.12 cputime=44.013 memavail=717992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.3 pwm=0.000
Stats 841.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=5561 bytes_read=7652 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996290 heater_bed: target=0 temp=58.9 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=29.5  sysload=0.11 cputime=44.047 memavail=717992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.3 pwm=0.000
Stats 842.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=5586 bytes_read=7835 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996354 heater_bed: target=0 temp=58.9 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=29.4  sysload=0.11 cputime=44.079 memavail=718748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.0 pwm=0.000
Stats 843.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=5613 bytes_read=8005 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996451 heater_bed: target=0 temp=58.8 pwm=0.000 raspberry_pi: temp=42.1 mcu_temp: temp=29.4  sysload=0.11 cputime=44.110 memavail=719208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.0 pwm=0.000
Stats 844.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=5638 bytes_read=8175 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996492 heater_bed: target=0 temp=58.7 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=29.2  sysload=0.11 cputime=44.143 memavail=719012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.0 pwm=0.000
Stats 845.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=5663 bytes_read=8358 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996516 heater_bed: target=0 temp=58.6 pwm=0.000 raspberry_pi: temp=42.3 mcu_temp: temp=29.3  sysload=0.11 cputime=44.176 memavail=719020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.7 pwm=0.000
Stats 846.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=5688 bytes_read=8513 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=0 temp=58.5 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=29.4  sysload=0.10 cputime=44.207 memavail=719024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.7 pwm=0.000
Heater extruder approaching new target of 200.000
Stats 847.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=5953 bytes_read=8718 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=58.4 pwm=0.695 raspberry_pi: temp=41.9 mcu_temp: temp=29.3  sysload=0.10 cputime=44.251 memavail=719024 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.6 pwm=1.000
Stats 848.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000023 mcu_task_stddev=0.000106 bytes_write=6073 bytes_read=8937 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=58.5 pwm=0.375 raspberry_pi: temp=41.6 mcu_temp: temp=29.4  sysload=0.10 cputime=44.288 memavail=718336 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=182.3 pwm=1.000
Stats 849.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000023 mcu_task_stddev=0.000106 bytes_write=6132 bytes_read=9102 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=58.5 pwm=0.323 raspberry_pi: temp=42.0 mcu_temp: temp=29.3  sysload=0.10 cputime=44.320 memavail=718084 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.5 pwm=1.000
Stats 850.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000023 mcu_task_stddev=0.000106 bytes_write=6192 bytes_read=9287 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=58.6 pwm=0.388 raspberry_pi: temp=41.5 mcu_temp: temp=29.5  sysload=0.10 cputime=44.358 memavail=717608 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.0 pwm=1.000
Stats 851.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000023 mcu_task_stddev=0.000106 bytes_write=6290 bytes_read=9490 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996655 heater_bed: target=60 temp=58.7 pwm=0.222 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.09 cputime=44.393 memavail=717852 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.7 pwm=1.000
Stats 852.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000023 mcu_task_stddev=0.000106 bytes_write=6358 bytes_read=9655 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=58.7 pwm=0.298 raspberry_pi: temp=42.0 mcu_temp: temp=29.4  sysload=0.09 cputime=44.425 memavail=718164 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.7 pwm=1.000
Stats 853.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6410 bytes_read=9838 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996681 heater_bed: target=60 temp=58.7 pwm=0.346 raspberry_pi: temp=41.4 mcu_temp: temp=29.3  sysload=0.09 cputime=44.460 memavail=718556 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.0 pwm=1.000
Stats 854.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6451 bytes_read=10016 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996696 heater_bed: target=60 temp=58.7 pwm=0.346 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.09 cputime=44.493 memavail=718556 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.6 pwm=1.000
Stats 855.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6508 bytes_read=10181 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996714 heater_bed: target=60 temp=58.8 pwm=0.290 raspberry_pi: temp=41.7 mcu_temp: temp=29.4  sysload=0.09 cputime=44.526 memavail=718564 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=182.2 pwm=1.000
Stats 856.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6552 bytes_read=10361 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996733 heater_bed: target=60 temp=58.8 pwm=0.290 raspberry_pi: temp=41.8 mcu_temp: temp=29.5  sysload=0.08 cputime=44.560 memavail=719016 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.0 pwm=1.000
Stats 857.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6586 bytes_read=10544 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996749 heater_bed: target=60 temp=58.8 pwm=0.290 raspberry_pi: temp=40.9 mcu_temp: temp=29.3  sysload=0.08 cputime=44.592 memavail=718816 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.3 pwm=1.000
Stats 858.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6657 bytes_read=10729 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996755 heater_bed: target=60 temp=58.9 pwm=0.283 raspberry_pi: temp=41.8 mcu_temp: temp=29.5  sysload=0.08 cputime=44.625 memavail=719824 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=185.2 pwm=1.000
Stats 859.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6707 bytes_read=10904 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996772 heater_bed: target=60 temp=58.9 pwm=0.374 raspberry_pi: temp=41.5 mcu_temp: temp=29.5  sysload=0.08 cputime=44.657 memavail=719576 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=186.3 pwm=1.000
Stats 860.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6799 bytes_read=11112 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996788 heater_bed: target=60 temp=59.0 pwm=0.285 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.08 cputime=44.692 memavail=719304 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.9 pwm=0.926
Stats 861.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6891 bytes_read=11292 bytes_retransmit=9 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996835 heater_bed: target=60 temp=59.0 pwm=0.353 raspberry_pi: temp=41.5 mcu_temp: temp=29.5  sysload=0.08 cputime=44.725 memavail=719336 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.0 pwm=0.836
Stats 862.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=7003 bytes_read=11487 bytes_retransmit=9 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=60 temp=59.0 pwm=0.263 raspberry_pi: temp=42.4 mcu_temp: temp=29.4  sysload=0.08 cputime=44.759 memavail=719596 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.3 pwm=0.777
Stats 863.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7082 bytes_read=11695 bytes_retransmit=9 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996841 heater_bed: target=60 temp=59.1 pwm=0.282 raspberry_pi: temp=41.8 mcu_temp: temp=29.4  sysload=0.08 cputime=44.793 memavail=720132 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.9 pwm=0.617
Stats 864.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7142 bytes_read=11865 bytes_retransmit=9 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=60 temp=59.1 pwm=0.282 raspberry_pi: temp=42.1 mcu_temp: temp=29.6  sysload=0.08 cputime=44.825 memavail=720156 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.1 pwm=0.617
Stats 865.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7227 bytes_read=12055 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996816 heater_bed: target=60 temp=59.1 pwm=0.294 raspberry_pi: temp=41.7 mcu_temp: temp=29.6  sysload=0.08 cputime=44.859 memavail=720104 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.1 pwm=0.543
Stats 866.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7325 bytes_read=12258 bytes_retransmit=9 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996815 heater_bed: target=60 temp=59.2 pwm=0.331 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.15 cputime=44.893 memavail=720164 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.4 pwm=0.480
Heater extruder within range of 200.000
Stats 867.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7401 bytes_read=12433 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996823 heater_bed: target=60 temp=59.2 pwm=0.334 raspberry_pi: temp=41.5 mcu_temp: temp=29.6  sysload=0.15 cputime=44.928 memavail=719916 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.2 pwm=0.480
Stats 868.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=7467 bytes_read=12649 bytes_retransmit=9 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996836 heater_bed: target=60 temp=59.2 pwm=0.281 raspberry_pi: temp=41.7 mcu_temp: temp=29.4  sysload=0.15 cputime=44.963 memavail=718956 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.9 pwm=0.480
Stats 869.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=7501 bytes_read=12832 bytes_retransmit=9 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=60 temp=59.2 pwm=0.281 raspberry_pi: temp=41.9 mcu_temp: temp=29.6  sysload=0.15 cputime=44.995 memavail=719012 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.7 pwm=0.480
Stats 870.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=7558 bytes_read=12997 bytes_retransmit=9 bytes_invalid=0 send_seq=458 receive_seq=458 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=60 temp=59.3 pwm=0.343 raspberry_pi: temp=41.5 mcu_temp: temp=29.5  sysload=0.15 cputime=45.028 memavail=718460 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.2 pwm=0.458
Stats 871.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=7693 bytes_read=13187 bytes_retransmit=9 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=60 temp=59.3 pwm=0.252 raspberry_pi: temp=41.8 mcu_temp: temp=29.5  sysload=0.22 cputime=45.061 memavail=718652 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.5 pwm=0.458
Stats 872.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=7767 bytes_read=13385 bytes_retransmit=9 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996859 heater_bed: target=60 temp=59.3 pwm=0.241 raspberry_pi: temp=41.6 mcu_temp: temp=29.4  sysload=0.22 cputime=45.095 memavail=718652 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.9 pwm=0.510
Stats 873.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000059 bytes_write=7827 bytes_read=13570 bytes_retransmit=9 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996865 heater_bed: target=60 temp=59.4 pwm=0.311 raspberry_pi: temp=41.9 mcu_temp: temp=29.6  sysload=0.22 cputime=45.128 memavail=717940 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.510
Stats 874.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000059 bytes_write=7852 bytes_read=13740 bytes_retransmit=9 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996865 heater_bed: target=60 temp=59.4 pwm=0.311 raspberry_pi: temp=41.8 mcu_temp: temp=29.6  sysload=0.22 cputime=45.161 memavail=717240 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.510
Stats 875.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000059 bytes_write=7888 bytes_read=13923 bytes_retransmit=9 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=60 temp=59.4 pwm=0.260 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.22 cputime=45.194 memavail=716488 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.510
Stats 876.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000059 bytes_write=7934 bytes_read=14088 bytes_retransmit=9 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=59.4 pwm=0.260 raspberry_pi: temp=41.8 mcu_temp: temp=29.4  sysload=0.36 cputime=45.227 memavail=716496 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.510
Stats 877.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000059 bytes_write=7991 bytes_read=14268 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996881 heater_bed: target=60 temp=59.5 pwm=0.246 raspberry_pi: temp=41.6 mcu_temp: temp=29.6  sysload=0.36 cputime=45.260 memavail=716244 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 878.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8048 bytes_read=14473 bytes_retransmit=9 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=60 temp=59.5 pwm=0.344 raspberry_pi: temp=41.9 mcu_temp: temp=29.5  sysload=0.36 cputime=45.294 memavail=715556 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 879.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8105 bytes_read=14628 bytes_retransmit=9 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=60 temp=59.5 pwm=0.276 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.36 cputime=45.327 memavail=715392 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.478
Stats 880.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8146 bytes_read=14798 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996888 heater_bed: target=60 temp=59.5 pwm=0.283 raspberry_pi: temp=41.1 mcu_temp: temp=29.4  sysload=0.36 cputime=45.360 memavail=714884 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.478
Stats 881.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8224 bytes_read=15001 bytes_retransmit=9 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=60 temp=59.5 pwm=0.283 raspberry_pi: temp=41.9 mcu_temp: temp=29.5  sysload=0.33 cputime=45.395 memavail=715428 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.453
Stats 882.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8249 bytes_read=15156 bytes_retransmit=9 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=60 temp=59.6 pwm=0.283 raspberry_pi: temp=41.8 mcu_temp: temp=29.5  sysload=0.33 cputime=45.426 memavail=715428 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.453
Stats 883.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8274 bytes_read=15341 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=60 temp=59.6 pwm=0.283 raspberry_pi: temp=42.0 mcu_temp: temp=29.4  sysload=0.33 cputime=45.461 memavail=715820 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.453
Stats 884.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8345 bytes_read=15539 bytes_retransmit=9 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=59.6 pwm=0.283 raspberry_pi: temp=41.9 mcu_temp: temp=29.2  sysload=0.33 cputime=45.495 memavail=715820 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.453
Stats 885.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8381 bytes_read=15694 bytes_retransmit=9 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=60 temp=59.6 pwm=0.283 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.33 cputime=45.527 memavail=716068 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.453
Stats 886.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8406 bytes_read=15878 bytes_retransmit=9 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=59.6 pwm=0.283 raspberry_pi: temp=41.7 mcu_temp: temp=29.7  sysload=0.31 cputime=45.560 memavail=715820 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.453
Stats 887.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8431 bytes_read=16047 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=59.6 pwm=0.283 raspberry_pi: temp=41.5 mcu_temp: temp=29.5  sysload=0.31 cputime=45.597 memavail=715828 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.453
Stats 888.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=8476 bytes_read=16217 bytes_retransmit=9 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=59.7 pwm=0.283 raspberry_pi: temp=41.6 mcu_temp: temp=29.5  sysload=0.31 cputime=45.629 memavail=714392 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.516
Stats 889.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=8517 bytes_read=16406 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=60 temp=59.7 pwm=0.262 raspberry_pi: temp=41.2 mcu_temp: temp=29.4  sysload=0.31 cputime=45.662 memavail=715484 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.516
Stats 890.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=8569 bytes_read=16580 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=59.7 pwm=0.283 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.31 cputime=45.695 memavail=715484 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.516
Stats 891.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=8610 bytes_read=16740 bytes_retransmit=9 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=59.7 pwm=0.283 raspberry_pi: temp=42.1 mcu_temp: temp=29.3  sysload=0.28 cputime=45.727 memavail=715236 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.455
Stats 892.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=8630 bytes_read=16919 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996886 heater_bed: target=60 temp=59.7 pwm=0.283 raspberry_pi: temp=42.1 mcu_temp: temp=29.5  sysload=0.28 cputime=45.762 memavail=715244 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.455
Stats 893.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=8655 bytes_read=17103 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=59.7 pwm=0.283 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.28 cputime=45.794 memavail=714332 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.455
Stats 894.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=8680 bytes_read=17258 bytes_retransmit=9 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=60 temp=59.8 pwm=0.283 raspberry_pi: temp=41.9 mcu_temp: temp=29.5  sysload=0.28 cputime=45.826 memavail=714364 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.455
Stats 895.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=8716 bytes_read=17442 bytes_retransmit=9 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=60 temp=59.8 pwm=0.270 raspberry_pi: temp=41.8 mcu_temp: temp=29.6  sysload=0.28 cputime=45.858 memavail=714364 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.455
Stats 896.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=8800 bytes_read=17626 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996885 heater_bed: target=60 temp=59.8 pwm=0.275 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.26 cputime=45.894 memavail=714568 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.486
Stats 897.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=8841 bytes_read=17786 bytes_retransmit=9 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=59.8 pwm=0.334 raspberry_pi: temp=42.2 mcu_temp: temp=29.4  sysload=0.26 cputime=45.926 memavail=714628 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.486
Stats 898.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8909 bytes_read=17995 bytes_retransmit=9 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=60 temp=59.8 pwm=0.177 raspberry_pi: temp=42.4 mcu_temp: temp=29.5  sysload=0.26 cputime=45.960 memavail=714652 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.486
Stats 899.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=8950 bytes_read=18169 bytes_retransmit=9 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=60 temp=59.8 pwm=0.300 raspberry_pi: temp=41.7 mcu_temp: temp=29.4  sysload=0.26 cputime=45.993 memavail=715252 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Stats 900.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=9018 bytes_read=18334 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=60 temp=59.8 pwm=0.305 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.26 cputime=46.028 memavail=716156 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.512
Stats 901.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=9059 bytes_read=18523 bytes_retransmit=9 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=60 temp=59.8 pwm=0.192 raspberry_pi: temp=42.1 mcu_temp: temp=29.4  sysload=0.32 cputime=46.064 memavail=717308 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.512
Stats 902.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=9116 bytes_read=18702 bytes_retransmit=9 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=60 temp=59.8 pwm=0.290 raspberry_pi: temp=41.8 mcu_temp: temp=29.4  sysload=0.32 cputime=46.098 memavail=717316 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.417
Stats 903.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9157 bytes_read=18877 bytes_retransmit=9 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=60 temp=59.8 pwm=0.290 raspberry_pi: temp=42.2 mcu_temp: temp=29.4  sysload=0.32 cputime=46.134 memavail=717148 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.489
Stats 904.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9230 bytes_read=19069 bytes_retransmit=9 bytes_invalid=0 send_seq=604 receive_seq=604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=59.9 pwm=0.206 raspberry_pi: temp=42.1 mcu_temp: temp=29.5  sysload=0.32 cputime=46.168 memavail=716896 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.489
Stats 905.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9271 bytes_read=19232 bytes_retransmit=9 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=59.9 pwm=0.309 raspberry_pi: temp=42.3 mcu_temp: temp=29.4  sysload=0.32 cputime=46.201 memavail=716848 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.489
Stats 906.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9328 bytes_read=19397 bytes_retransmit=9 bytes_invalid=0 send_seq=613 receive_seq=613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=60 temp=59.9 pwm=0.313 raspberry_pi: temp=42.7 mcu_temp: temp=29.5  sysload=0.29 cputime=46.234 memavail=717240 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.489
Stats 907.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9385 bytes_read=19591 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=60 temp=59.9 pwm=0.225 raspberry_pi: temp=42.4 mcu_temp: temp=29.2  sysload=0.29 cputime=46.268 memavail=717472 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.465
Stats 908.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=9421 bytes_read=19775 bytes_retransmit=9 bytes_invalid=0 send_seq=621 receive_seq=621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=60 temp=59.9 pwm=0.300 raspberry_pi: temp=42.4 mcu_temp: temp=29.4  sysload=0.29 cputime=46.300 memavail=718084 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.465
Stats 909.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=9446 bytes_read=19930 bytes_retransmit=9 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=60 temp=59.9 pwm=0.300 raspberry_pi: temp=41.7 mcu_temp: temp=29.4  sysload=0.29 cputime=46.331 memavail=718284 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.465
Stats 910.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=9487 bytes_read=20119 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=59.9 pwm=0.247 raspberry_pi: temp=41.6 mcu_temp: temp=29.4  sysload=0.29 cputime=46.364 memavail=717832 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.465
Stats 911.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=9528 bytes_read=20293 bytes_retransmit=9 bytes_invalid=0 send_seq=632 receive_seq=632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=59.9 pwm=0.247 raspberry_pi: temp=41.3 mcu_temp: temp=29.3  sysload=0.27 cputime=46.397 memavail=717276 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.438
Stats 912.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=9553 bytes_read=20448 bytes_retransmit=9 bytes_invalid=0 send_seq=635 receive_seq=635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=60 temp=59.9 pwm=0.247 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.27 cputime=46.429 memavail=717980 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.438
Stats 913.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=9621 bytes_read=20657 bytes_retransmit=9 bytes_invalid=0 send_seq=640 receive_seq=640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=60 temp=59.9 pwm=0.303 raspberry_pi: temp=41.6 mcu_temp: temp=29.3  sysload=0.27 cputime=46.463 memavail=717840 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.438
Stats 914.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=9657 bytes_read=20826 bytes_retransmit=9 bytes_invalid=0 send_seq=643 receive_seq=643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=60 temp=59.9 pwm=0.236 raspberry_pi: temp=41.9 mcu_temp: temp=29.6  sysload=0.27 cputime=46.496 memavail=717880 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.438
Stats 915.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=9714 bytes_read=20991 bytes_retransmit=9 bytes_invalid=0 send_seq=648 receive_seq=648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=60 temp=59.9 pwm=0.297 raspberry_pi: temp=42.1 mcu_temp: temp=29.4  sysload=0.27 cputime=46.528 memavail=718164 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.444
Stats 916.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=9739 bytes_read=21175 bytes_retransmit=9 bytes_invalid=0 send_seq=651 receive_seq=651 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=60 temp=59.9 pwm=0.297 raspberry_pi: temp=41.6 mcu_temp: temp=29.6  sysload=0.33 cputime=46.562 memavail=717816 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.444
Stats 917.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=9807 bytes_read=21354 bytes_retransmit=9 bytes_invalid=0 send_seq=656 receive_seq=656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=59.9 pwm=0.319 raspberry_pi: temp=41.9 mcu_temp: temp=29.6  sysload=0.33 cputime=46.595 memavail=717852 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.495
Stats 918.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9848 bytes_read=21529 bytes_retransmit=9 bytes_invalid=0 send_seq=660 receive_seq=660 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=59.9 pwm=0.268 raspberry_pi: temp=41.9 mcu_temp: temp=29.5  sysload=0.33 cputime=46.628 memavail=717644 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.495
Stats 919.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9889 bytes_read=21718 bytes_retransmit=9 bytes_invalid=0 send_seq=664 receive_seq=664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=59.9 pwm=0.330 raspberry_pi: temp=42.0 mcu_temp: temp=29.4  sysload=0.33 cputime=46.661 memavail=717644 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 920.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9925 bytes_read=21887 bytes_retransmit=9 bytes_invalid=0 send_seq=667 receive_seq=667 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=59.9 pwm=0.266 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.33 cputime=46.693 memavail=717644 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 921.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9966 bytes_read=22047 bytes_retransmit=9 bytes_invalid=0 send_seq=671 receive_seq=671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=60 temp=59.9 pwm=0.266 raspberry_pi: temp=42.0 mcu_temp: temp=29.4  sysload=0.38 cputime=46.726 memavail=717148 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 922.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=9991 bytes_read=22231 bytes_retransmit=9 bytes_invalid=0 send_seq=674 receive_seq=674 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=59.9 pwm=0.266 raspberry_pi: temp=42.2 mcu_temp: temp=29.5  sysload=0.38 cputime=46.758 memavail=717400 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 923.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10016 bytes_read=22415 bytes_retransmit=9 bytes_invalid=0 send_seq=677 receive_seq=677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=59.9 pwm=0.266 raspberry_pi: temp=41.6 mcu_temp: temp=29.5  sysload=0.38 cputime=46.791 memavail=717236 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 924.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10089 bytes_read=22585 bytes_retransmit=9 bytes_invalid=0 send_seq=683 receive_seq=683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=59.9 pwm=0.327 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.38 cputime=46.823 memavail=717492 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.470
Stats 925.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10146 bytes_read=22779 bytes_retransmit=9 bytes_invalid=0 send_seq=688 receive_seq=688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.273 raspberry_pi: temp=41.5 mcu_temp: temp=29.5  sysload=0.38 cputime=46.857 memavail=717632 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.521
Stats 926.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10187 bytes_read=22953 bytes_retransmit=9 bytes_invalid=0 send_seq=692 receive_seq=692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=59.9 pwm=0.273 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.35 cputime=46.891 memavail=717688 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.599
Stats 927.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10244 bytes_read=23118 bytes_retransmit=9 bytes_invalid=0 send_seq=697 receive_seq=697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=59.9 pwm=0.324 raspberry_pi: temp=41.9 mcu_temp: temp=29.5  sysload=0.35 cputime=46.924 memavail=717796 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.599
Stats 928.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10307 bytes_read=23322 bytes_retransmit=9 bytes_invalid=0 send_seq=701 receive_seq=701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.290 raspberry_pi: temp=42.2 mcu_temp: temp=29.6  sysload=0.35 cputime=46.959 memavail=716912 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.599
Stats 929.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10375 bytes_read=23501 bytes_retransmit=9 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.291 raspberry_pi: temp=41.9 mcu_temp: temp=29.6  sysload=0.35 cputime=46.994 memavail=716912 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.654
Stats 930.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10422 bytes_read=23667 bytes_retransmit=9 bytes_invalid=0 send_seq=711 receive_seq=711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.291 raspberry_pi: temp=42.0 mcu_temp: temp=29.6  sysload=0.35 cputime=47.029 memavail=716436 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.600
Stats 931.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10479 bytes_read=23855 bytes_retransmit=9 bytes_invalid=0 send_seq=716 receive_seq=716 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.280 raspberry_pi: temp=41.5 mcu_temp: temp=29.4  sysload=0.32 cputime=47.067 memavail=716880 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.600
Stats 932.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=10520 bytes_read=24029 bytes_retransmit=9 bytes_invalid=0 send_seq=720 receive_seq=720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.280 raspberry_pi: temp=41.5 mcu_temp: temp=29.5  sysload=0.32 cputime=47.105 memavail=716728 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.545
Stats 933.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10577 bytes_read=24209 bytes_retransmit=9 bytes_invalid=0 send_seq=725 receive_seq=725 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=41.8 mcu_temp: temp=29.4  sysload=0.32 cputime=47.142 memavail=717220 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.491
Stats 934.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10629 bytes_read=24398 bytes_retransmit=9 bytes_invalid=0 send_seq=729 receive_seq=729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.300 raspberry_pi: temp=42.5 mcu_temp: temp=29.5  sysload=0.32 cputime=47.181 memavail=717280 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.491
Stats 935.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10686 bytes_read=24577 bytes_retransmit=9 bytes_invalid=0 send_seq=734 receive_seq=734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=42.4 mcu_temp: temp=29.7  sysload=0.32 cputime=47.218 memavail=717280 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.431
Stats 936.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10759 bytes_read=24747 bytes_retransmit=9 bytes_invalid=0 send_seq=740 receive_seq=740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.248 raspberry_pi: temp=41.8 mcu_temp: temp=29.6  sysload=0.30 cputime=47.256 memavail=717056 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.431
Stats 937.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10816 bytes_read=24941 bytes_retransmit=9 bytes_invalid=0 send_seq=745 receive_seq=745 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.278 raspberry_pi: temp=42.4 mcu_temp: temp=29.5  sysload=0.30 cputime=47.293 memavail=717320 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.431
Stats 938.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10841 bytes_read=25125 bytes_retransmit=9 bytes_invalid=0 send_seq=748 receive_seq=748 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.278 raspberry_pi: temp=42.3 mcu_temp: temp=29.5  sysload=0.30 cputime=47.330 memavail=717320 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.431
Stats 939.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10898 bytes_read=25290 bytes_retransmit=9 bytes_invalid=0 send_seq=753 receive_seq=753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.199 raspberry_pi: temp=42.4 mcu_temp: temp=29.6  sysload=0.30 cputime=47.366 memavail=717076 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.414
Stats 940.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10955 bytes_read=25484 bytes_retransmit=9 bytes_invalid=0 send_seq=758 receive_seq=758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=42.0 mcu_temp: temp=29.6  sysload=0.30 cputime=47.403 memavail=717076 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.414
Stats 941.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=10996 bytes_read=25658 bytes_retransmit=9 bytes_invalid=0 send_seq=762 receive_seq=762 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=41.9 mcu_temp: temp=29.5  sysload=0.27 cputime=47.440 memavail=717076 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.414
Stats 942.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=11053 bytes_read=25823 bytes_retransmit=9 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.1 pwm=0.215 raspberry_pi: temp=41.9 mcu_temp: temp=29.5  sysload=0.27 cputime=47.476 memavail=716832 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.465
Stats 943.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11078 bytes_read=26022 bytes_retransmit=9 bytes_invalid=0 send_seq=770 receive_seq=770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.1 pwm=0.215 raspberry_pi: temp=41.8 mcu_temp: temp=29.6  sysload=0.27 cputime=47.513 memavail=717364 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.465
Stats 944.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11135 bytes_read=26201 bytes_retransmit=9 bytes_invalid=0 send_seq=775 receive_seq=775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=60.0 pwm=0.288 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.27 cputime=47.549 memavail=717364 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.532
Stats 945.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11171 bytes_read=26356 bytes_retransmit=9 bytes_invalid=0 send_seq=778 receive_seq=778 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.1 pwm=0.218 raspberry_pi: temp=42.2 mcu_temp: temp=29.4  sysload=0.27 cputime=47.585 memavail=717364 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.532
Stats 946.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11196 bytes_read=26540 bytes_retransmit=9 bytes_invalid=0 send_seq=781 receive_seq=781 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.1 pwm=0.218 raspberry_pi: temp=42.1 mcu_temp: temp=29.5  sysload=0.25 cputime=47.621 memavail=717112 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.532
Stats 947.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11253 bytes_read=26719 bytes_retransmit=9 bytes_invalid=0 send_seq=786 receive_seq=786 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.254 raspberry_pi: temp=41.9 mcu_temp: temp=29.4  sysload=0.25 cputime=47.658 memavail=716868 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.532
Stats 948.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11294 bytes_read=26894 bytes_retransmit=9 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.1 pwm=0.254 raspberry_pi: temp=42.4 mcu_temp: temp=29.6  sysload=0.25 cputime=47.694 memavail=716956 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 949.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11319 bytes_read=27078 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.254 raspberry_pi: temp=42.1 mcu_temp: temp=29.5  sysload=0.25 cputime=47.729 memavail=716956 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 950.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11360 bytes_read=27252 bytes_retransmit=9 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.1 pwm=0.192 raspberry_pi: temp=42.2 mcu_temp: temp=29.6  sysload=0.25 cputime=47.766 memavail=716804 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.495
Stats 951.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11417 bytes_read=27417 bytes_retransmit=9 bytes_invalid=0 send_seq=802 receive_seq=802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.233 raspberry_pi: temp=42.0 mcu_temp: temp=29.6  sysload=0.23 cputime=47.801 memavail=716832 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.495
Stats 952.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11480 bytes_read=27620 bytes_retransmit=9 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.1 pwm=0.244 raspberry_pi: temp=41.9 mcu_temp: temp=29.8  sysload=0.23 cputime=47.840 memavail=716600 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.433
Stats 953.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11521 bytes_read=27795 bytes_retransmit=9 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=42.2 mcu_temp: temp=29.7  sysload=0.23 cputime=47.877 memavail=716360 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.433
Stats 954.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11562 bytes_read=27955 bytes_retransmit=9 bytes_invalid=0 send_seq=814 receive_seq=814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.1 pwm=0.225 raspberry_pi: temp=42.5 mcu_temp: temp=29.5  sysload=0.23 cputime=47.912 memavail=716368 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.433
Stats 955.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11587 bytes_read=28147 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.1 pwm=0.225 raspberry_pi: temp=42.3 mcu_temp: temp=29.7  sysload=0.23 cputime=47.949 memavail=716368 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.433
Stats 956.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11655 bytes_read=28302 bytes_retransmit=9 bytes_invalid=0 send_seq=822 receive_seq=822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.1 pwm=0.252 raspberry_pi: temp=42.0 mcu_temp: temp=29.7  sysload=0.21 cputime=47.985 memavail=716368 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.493
Stats 957.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=11712 bytes_read=28467 bytes_retransmit=9 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.1 pwm=0.211 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.21 cputime=48.021 memavail=716120 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 958.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=11753 bytes_read=28685 bytes_retransmit=9 bytes_invalid=0 send_seq=831 receive_seq=831 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.277 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.21 cputime=48.061 memavail=716384 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 959.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=11778 bytes_read=28840 bytes_retransmit=9 bytes_invalid=0 send_seq=834 receive_seq=834 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.277 raspberry_pi: temp=42.1 mcu_temp: temp=29.8  sysload=0.21 cputime=48.096 memavail=716384 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 960.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=11851 bytes_read=29010 bytes_retransmit=9 bytes_invalid=0 send_seq=840 receive_seq=840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.1 pwm=0.222 raspberry_pi: temp=42.1 mcu_temp: temp=29.6  sysload=0.21 cputime=48.133 memavail=716608 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 961.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=11903 bytes_read=29213 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.1 pwm=0.190 raspberry_pi: temp=42.1 mcu_temp: temp=29.6  sysload=0.36 cputime=48.170 memavail=716696 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 962.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=11944 bytes_read=29373 bytes_retransmit=9 bytes_invalid=0 send_seq=848 receive_seq=848 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.1 pwm=0.302 raspberry_pi: temp=42.0 mcu_temp: temp=29.6  sysload=0.36 cputime=48.205 memavail=716696 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 963.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=11985 bytes_read=29548 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.1 pwm=0.238 raspberry_pi: temp=42.5 mcu_temp: temp=29.7  sysload=0.36 cputime=48.243 memavail=716748 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 964.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12010 bytes_read=29746 bytes_retransmit=9 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.1 pwm=0.238 raspberry_pi: temp=42.3 mcu_temp: temp=29.7  sysload=0.36 cputime=48.280 memavail=716748 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 965.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12083 bytes_read=29916 bytes_retransmit=9 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.1 pwm=0.239 raspberry_pi: temp=42.6 mcu_temp: temp=29.7  sysload=0.36 cputime=48.316 memavail=717028 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 966.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12108 bytes_read=30086 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.1 pwm=0.239 raspberry_pi: temp=42.7 mcu_temp: temp=29.6  sysload=0.33 cputime=48.353 memavail=716776 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 967.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12133 bytes_read=30269 bytes_retransmit=9 bytes_invalid=0 send_seq=867 receive_seq=867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.1 pwm=0.239 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.33 cputime=48.388 memavail=716528 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 968.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12158 bytes_read=30439 bytes_retransmit=9 bytes_invalid=0 send_seq=870 receive_seq=870 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996964 heater_bed: target=60 temp=60.1 pwm=0.239 raspberry_pi: temp=42.8 mcu_temp: temp=29.9  sysload=0.33 cputime=48.424 memavail=716724 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 969.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12215 bytes_read=30619 bytes_retransmit=9 bytes_invalid=0 send_seq=875 receive_seq=875 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996963 heater_bed: target=60 temp=60.1 pwm=0.215 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.33 cputime=48.460 memavail=716844 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 970.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12272 bytes_read=30812 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=60 temp=60.1 pwm=0.226 raspberry_pi: temp=43.0 mcu_temp: temp=29.6  sysload=0.33 cputime=48.497 memavail=717344 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 971.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12329 bytes_read=30977 bytes_retransmit=9 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=60.1 pwm=0.234 raspberry_pi: temp=42.6 mcu_temp: temp=29.6  sysload=0.30 cputime=48.533 memavail=717100 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 972.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12354 bytes_read=31147 bytes_retransmit=9 bytes_invalid=0 send_seq=888 receive_seq=888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=60.1 pwm=0.234 raspberry_pi: temp=42.6 mcu_temp: temp=29.6  sysload=0.30 cputime=48.569 memavail=717048 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 973.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=12411 bytes_read=31355 bytes_retransmit=9 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=60.0 pwm=0.287 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.30 cputime=48.608 memavail=717508 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.477
Stats 974.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=12484 bytes_read=31525 bytes_retransmit=9 bytes_invalid=0 send_seq=899 receive_seq=899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.1 pwm=0.192 raspberry_pi: temp=42.3 mcu_temp: temp=29.8  sysload=0.30 cputime=48.645 memavail=717456 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.477
Stats 975.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=12536 bytes_read=31700 bytes_retransmit=9 bytes_invalid=0 send_seq=903 receive_seq=903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.1 pwm=0.212 raspberry_pi: temp=42.2 mcu_temp: temp=29.7  sysload=0.30 cputime=48.683 memavail=717760 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.477
Stats 976.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=12561 bytes_read=31883 bytes_retransmit=9 bytes_invalid=0 send_seq=906 receive_seq=906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.1 pwm=0.212 raspberry_pi: temp=41.9 mcu_temp: temp=29.8  sysload=0.28 cputime=48.719 memavail=717760 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.477
Stats 977.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=12602 bytes_read=32043 bytes_retransmit=9 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.1 pwm=0.212 raspberry_pi: temp=42.4 mcu_temp: temp=29.7  sysload=0.28 cputime=48.755 memavail=717760 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 978.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12643 bytes_read=32233 bytes_retransmit=9 bytes_invalid=0 send_seq=914 receive_seq=914 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.275 raspberry_pi: temp=42.2 mcu_temp: temp=29.8  sysload=0.28 cputime=48.791 memavail=717320 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 979.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12700 bytes_read=32426 bytes_retransmit=9 bytes_invalid=0 send_seq=919 receive_seq=919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.256 raspberry_pi: temp=42.5 mcu_temp: temp=29.7  sysload=0.28 cputime=48.828 memavail=717320 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 980.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12757 bytes_read=32591 bytes_retransmit=9 bytes_invalid=0 send_seq=924 receive_seq=924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.1 pwm=0.244 raspberry_pi: temp=42.3 mcu_temp: temp=29.7  sysload=0.28 cputime=48.864 memavail=717324 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 981.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12798 bytes_read=32755 bytes_retransmit=9 bytes_invalid=0 send_seq=928 receive_seq=928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996958 heater_bed: target=60 temp=60.1 pwm=0.178 raspberry_pi: temp=42.2 mcu_temp: temp=29.6  sysload=0.25 cputime=48.901 memavail=717524 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 982.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12871 bytes_read=32946 bytes_retransmit=9 bytes_invalid=0 send_seq=934 receive_seq=934 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.1 pwm=0.225 raspberry_pi: temp=42.5 mcu_temp: temp=29.6  sysload=0.25 cputime=48.938 memavail=717580 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 983.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12896 bytes_read=33116 bytes_retransmit=9 bytes_invalid=0 send_seq=937 receive_seq=937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.1 pwm=0.225 raspberry_pi: temp=42.1 mcu_temp: temp=29.8  sysload=0.25 cputime=48.974 memavail=717132 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 984.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12948 bytes_read=33291 bytes_retransmit=9 bytes_invalid=0 send_seq=941 receive_seq=941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.1 pwm=0.228 raspberry_pi: temp=42.2 mcu_temp: temp=29.6  sysload=0.25 cputime=49.012 memavail=717156 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.468
Stats 985.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=12973 bytes_read=33474 bytes_retransmit=9 bytes_invalid=0 send_seq=944 receive_seq=944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.228 raspberry_pi: temp=42.6 mcu_temp: temp=29.8  sysload=0.25 cputime=49.049 memavail=717156 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.506
Stats 986.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13014 bytes_read=33634 bytes_retransmit=9 bytes_invalid=0 send_seq=948 receive_seq=948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996959 heater_bed: target=60 temp=60.1 pwm=0.228 raspberry_pi: temp=42.6 mcu_temp: temp=29.7  sysload=0.23 cputime=49.086 memavail=716904 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 987.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13039 bytes_read=33804 bytes_retransmit=9 bytes_invalid=0 send_seq=951 receive_seq=951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.280 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.23 cputime=49.122 memavail=716656 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.506
Stats 988.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=13096 bytes_read=34012 bytes_retransmit=9 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.1 pwm=0.227 raspberry_pi: temp=42.1 mcu_temp: temp=29.6  sysload=0.23 cputime=49.161 memavail=716480 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.506
Stats 989.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=13121 bytes_read=34167 bytes_retransmit=9 bytes_invalid=0 send_seq=959 receive_seq=959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=42.7 mcu_temp: temp=29.6  sysload=0.23 cputime=49.197 memavail=716480 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 990.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=13173 bytes_read=34342 bytes_retransmit=9 bytes_invalid=0 send_seq=963 receive_seq=963 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.327 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.23 cputime=49.236 memavail=716480 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.505
Stats 991.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=13252 bytes_read=34556 bytes_retransmit=9 bytes_invalid=0 send_seq=970 receive_seq=970 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=60.1 pwm=0.186 raspberry_pi: temp=42.1 mcu_temp: temp=29.4  sysload=0.21 cputime=49.274 memavail=716480 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.505
Stats 992.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=13325 bytes_read=34726 bytes_retransmit=9 bytes_invalid=0 send_seq=976 receive_seq=976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.285 raspberry_pi: temp=42.1 mcu_temp: temp=29.7  sysload=0.21 cputime=49.313 memavail=716480 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.505
Stats 993.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13414 bytes_read=34931 bytes_retransmit=9 bytes_invalid=0 send_seq=983 receive_seq=983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.245 raspberry_pi: temp=42.3 mcu_temp: temp=29.5  sysload=0.21 cputime=49.353 memavail=716984 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.446
Stats 994.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13439 bytes_read=35114 bytes_retransmit=9 bytes_invalid=0 send_seq=986 receive_seq=986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996966 heater_bed: target=60 temp=60.0 pwm=0.245 raspberry_pi: temp=42.6 mcu_temp: temp=29.6  sysload=0.21 cputime=49.388 memavail=717280 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.446
Stats 995.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13480 bytes_read=35274 bytes_retransmit=9 bytes_invalid=0 send_seq=990 receive_seq=990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996962 heater_bed: target=60 temp=60.1 pwm=0.186 raspberry_pi: temp=42.3 mcu_temp: temp=29.6  sysload=0.21 cputime=49.423 memavail=717408 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.446
Stats 996.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13537 bytes_read=35454 bytes_retransmit=9 bytes_invalid=0 send_seq=995 receive_seq=995 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996962 heater_bed: target=60 temp=60.0 pwm=0.228 raspberry_pi: temp=42.3 mcu_temp: temp=29.8  sysload=0.20 cputime=49.456 memavail=717412 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.446
Stats 997.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13578 bytes_read=35642 bytes_retransmit=9 bytes_invalid=0 send_seq=999 receive_seq=999 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996959 heater_bed: target=60 temp=60.0 pwm=0.228 raspberry_pi: temp=42.1 mcu_temp: temp=29.7  sysload=0.20 cputime=49.489 memavail=717120 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.442
Stats 998.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13603 bytes_read=35812 bytes_retransmit=9 bytes_invalid=0 send_seq=1002 receive_seq=1002 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.228 raspberry_pi: temp=42.3 mcu_temp: temp=29.8  sysload=0.20 cputime=49.522 memavail=717252 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.442
Stats 999.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13628 bytes_read=35982 bytes_retransmit=9 bytes_invalid=0 send_seq=1005 receive_seq=1005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.228 raspberry_pi: temp=42.6 mcu_temp: temp=29.7  sysload=0.20 cputime=49.557 memavail=717724 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.442
Stats 1000.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13685 bytes_read=36175 bytes_retransmit=9 bytes_invalid=0 send_seq=1010 receive_seq=1010 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.291 raspberry_pi: temp=42.7 mcu_temp: temp=29.7  sysload=0.20 cputime=49.589 memavail=717792 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.442
Stats 1001.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13742 bytes_read=36340 bytes_retransmit=9 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.225 raspberry_pi: temp=41.8 mcu_temp: temp=29.6  sysload=0.18 cputime=49.622 memavail=717500 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.523
Stats 1002.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=13799 bytes_read=36520 bytes_retransmit=9 bytes_invalid=0 send_seq=1020 receive_seq=1020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=42.6 mcu_temp: temp=29.6  sysload=0.18 cputime=49.655 memavail=717796 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.523
Stats 1003.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13819 bytes_read=36713 bytes_retransmit=9 bytes_invalid=0 send_seq=1022 receive_seq=1022 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=42.7 mcu_temp: temp=29.4  sysload=0.18 cputime=49.688 memavail=719272 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.523
Stats 1004.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13844 bytes_read=36868 bytes_retransmit=9 bytes_invalid=0 send_seq=1025 receive_seq=1025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=42.9 mcu_temp: temp=29.7  sysload=0.18 cputime=49.723 memavail=718900 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.523
Stats 1005.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13896 bytes_read=37043 bytes_retransmit=9 bytes_invalid=0 send_seq=1029 receive_seq=1029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.282 raspberry_pi: temp=42.6 mcu_temp: temp=29.6  sysload=0.18 cputime=49.756 memavail=718900 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.498
Stats 1006.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13937 bytes_read=37226 bytes_retransmit=9 bytes_invalid=0 send_seq=1033 receive_seq=1033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997038 heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=42.4 mcu_temp: temp=29.7  sysload=0.17 cputime=49.789 memavail=718900 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.498
Stats 1007.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13962 bytes_read=37371 bytes_retransmit=9 bytes_invalid=0 send_seq=1036 receive_seq=1036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997033 heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=42.7 mcu_temp: temp=29.7  sysload=0.17 cputime=49.820 memavail=718900 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.498
Stats 1008.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=14051 bytes_read=37573 bytes_retransmit=9 bytes_invalid=0 send_seq=1043 receive_seq=1043 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997028 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=42.7 mcu_temp: temp=29.7  sysload=0.17 cputime=49.856 memavail=717740 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.489
Stats 1009.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=14092 bytes_read=37761 bytes_retransmit=9 bytes_invalid=0 send_seq=1047 receive_seq=1047 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997021 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=42.5 mcu_temp: temp=29.6  sysload=0.17 cputime=49.890 memavail=717524 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1010.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=14117 bytes_read=37916 bytes_retransmit=9 bytes_invalid=0 send_seq=1050 receive_seq=1050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997017 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=42.5 mcu_temp: temp=29.7  sysload=0.17 cputime=49.923 memavail=717524 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1011.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=14174 bytes_read=38096 bytes_retransmit=9 bytes_invalid=0 send_seq=1055 receive_seq=1055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167997010 heater_bed: target=60 temp=60.0 pwm=0.214 raspberry_pi: temp=42.7 mcu_temp: temp=29.7  sysload=0.23 cputime=49.957 memavail=717528 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.429
Stats 1012.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=14231 bytes_read=38289 bytes_retransmit=9 bytes_invalid=0 send_seq=1060 receive_seq=1060 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.3 mcu_temp: temp=29.8  sysload=0.23 cputime=49.990 memavail=717528 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.429
Stats 1013.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14288 bytes_read=38469 bytes_retransmit=9 bytes_invalid=0 send_seq=1065 receive_seq=1065 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997001 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=42.3 mcu_temp: temp=29.8  sysload=0.23 cputime=50.024 memavail=717664 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.429
Stats 1014.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14345 bytes_read=38649 bytes_retransmit=9 bytes_invalid=0 send_seq=1070 receive_seq=1070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.0 pwm=0.270 raspberry_pi: temp=42.8 mcu_temp: temp=29.7  sysload=0.23 cputime=50.060 memavail=717664 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.429
Stats 1015.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14429 bytes_read=38847 bytes_retransmit=9 bytes_invalid=0 send_seq=1076 receive_seq=1076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 heater_bed: target=60 temp=60.0 pwm=0.207 raspberry_pi: temp=42.6 mcu_temp: temp=29.7  sysload=0.23 cputime=50.094 memavail=717672 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.463
Stats 1016.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14470 bytes_read=39007 bytes_retransmit=9 bytes_invalid=0 send_seq=1080 receive_seq=1080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996992 heater_bed: target=60 temp=60.0 pwm=0.274 raspberry_pi: temp=42.2 mcu_temp: temp=29.6  sysload=0.21 cputime=50.126 memavail=717672 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.463
Stats 1017.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14543 bytes_read=39192 bytes_retransmit=9 bytes_invalid=0 send_seq=1086 receive_seq=1086 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996989 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=42.2 mcu_temp: temp=29.9  sysload=0.21 cputime=50.160 memavail=717420 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.463
Stats 1018.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14600 bytes_read=39400 bytes_retransmit=9 bytes_invalid=0 send_seq=1091 receive_seq=1091 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=42.2 mcu_temp: temp=29.6  sysload=0.21 cputime=50.194 memavail=716732 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.515
Stats 1019.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14652 bytes_read=39560 bytes_retransmit=9 bytes_invalid=0 send_seq=1095 receive_seq=1095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996984 heater_bed: target=60 temp=60.0 pwm=0.202 raspberry_pi: temp=42.8 mcu_temp: temp=29.7  sysload=0.21 cputime=50.227 memavail=716492 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.515
Stats 1020.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14709 bytes_read=39740 bytes_retransmit=9 bytes_invalid=0 send_seq=1100 receive_seq=1100 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.0 pwm=0.222 raspberry_pi: temp=42.8 mcu_temp: temp=29.6  sysload=0.21 cputime=50.259 memavail=716492 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.515
Stats 1021.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14734 bytes_read=39923 bytes_retransmit=9 bytes_invalid=0 send_seq=1103 receive_seq=1103 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.0 pwm=0.222 raspberry_pi: temp=41.9 mcu_temp: temp=29.7  sysload=0.28 cputime=50.292 memavail=716492 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.515
Stats 1022.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=14775 bytes_read=40083 bytes_retransmit=9 bytes_invalid=0 send_seq=1107 receive_seq=1107 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996974 heater_bed: target=60 temp=60.0 pwm=0.222 raspberry_pi: temp=42.3 mcu_temp: temp=29.8  sysload=0.28 cputime=50.325 memavail=716492 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1023.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14832 bytes_read=40278 bytes_retransmit=9 bytes_invalid=0 send_seq=1112 receive_seq=1112 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=42.7 mcu_temp: temp=29.8  sysload=0.28 cputime=50.359 memavail=715572 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1024.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14857 bytes_read=40461 bytes_retransmit=9 bytes_invalid=0 send_seq=1115 receive_seq=1115 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=42.7 mcu_temp: temp=29.9  sysload=0.28 cputime=50.392 memavail=715500 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1025.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14909 bytes_read=40621 bytes_retransmit=9 bytes_invalid=0 send_seq=1119 receive_seq=1119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996972 heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=42.4 mcu_temp: temp=29.8  sysload=0.28 cputime=50.423 memavail=715832 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1026.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14966 bytes_read=40801 bytes_retransmit=9 bytes_invalid=0 send_seq=1124 receive_seq=1124 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=42.4 mcu_temp: temp=29.9  sysload=0.25 cputime=50.457 memavail=715832 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1027.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14991 bytes_read=40984 bytes_retransmit=9 bytes_invalid=0 send_seq=1127 receive_seq=1127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=42.4 mcu_temp: temp=29.9  sysload=0.25 cputime=50.489 memavail=715784 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1028.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15027 bytes_read=41154 bytes_retransmit=9 bytes_invalid=0 send_seq=1130 receive_seq=1130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996974 heater_bed: target=60 temp=60.0 pwm=0.328 raspberry_pi: temp=43.1 mcu_temp: temp=29.7  sysload=0.25 cputime=50.522 memavail=715688 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1029.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15068 bytes_read=41329 bytes_retransmit=9 bytes_invalid=0 send_seq=1134 receive_seq=1134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996970 heater_bed: target=60 temp=60.0 pwm=0.178 raspberry_pi: temp=43.2 mcu_temp: temp=29.8  sysload=0.25 cputime=50.554 memavail=715764 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1030.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15141 bytes_read=41527 bytes_retransmit=9 bytes_invalid=0 send_seq=1140 receive_seq=1140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996966 heater_bed: target=60 temp=60.0 pwm=0.236 raspberry_pi: temp=42.9 mcu_temp: temp=30.0  sysload=0.25 cputime=50.587 memavail=715772 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.436
Stats 1031.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15166 bytes_read=41682 bytes_retransmit=9 bytes_invalid=0 send_seq=1143 receive_seq=1143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996963 heater_bed: target=60 temp=60.0 pwm=0.236 raspberry_pi: temp=42.8 mcu_temp: temp=29.9  sysload=0.31 cputime=50.618 memavail=716064 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.436
Stats 1032.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15207 bytes_read=41849 bytes_retransmit=9 bytes_invalid=0 send_seq=1147 receive_seq=1147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996965 heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=42.7 mcu_temp: temp=29.8  sysload=0.31 cputime=50.651 memavail=716120 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.436
Stats 1033.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15264 bytes_read=42048 bytes_retransmit=9 bytes_invalid=0 send_seq=1152 receive_seq=1152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996962 heater_bed: target=60 temp=60.0 pwm=0.279 raspberry_pi: temp=43.0 mcu_temp: temp=29.8  sysload=0.31 cputime=50.685 memavail=717464 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 1034.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15300 bytes_read=42203 bytes_retransmit=9 bytes_invalid=0 send_seq=1155 receive_seq=1155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996959 heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=43.2 mcu_temp: temp=29.8  sysload=0.31 cputime=50.717 memavail=717476 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 1035.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15325 bytes_read=42373 bytes_retransmit=9 bytes_invalid=0 send_seq=1158 receive_seq=1158 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.308 raspberry_pi: temp=42.9 mcu_temp: temp=29.9  sysload=0.31 cputime=50.750 memavail=717860 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 1036.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15393 bytes_read=42566 bytes_retransmit=9 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996964 heater_bed: target=60 temp=60.0 pwm=0.281 raspberry_pi: temp=43.1 mcu_temp: temp=29.9  sysload=0.29 cputime=50.784 memavail=717860 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 1037.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15434 bytes_read=42726 bytes_retransmit=9 bytes_invalid=0 send_seq=1167 receive_seq=1167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=42.7 mcu_temp: temp=30.0  sysload=0.29 cputime=50.816 memavail=717860 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 1038.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15475 bytes_read=42916 bytes_retransmit=9 bytes_invalid=0 send_seq=1171 receive_seq=1171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996980 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=42.4 mcu_temp: temp=30.0  sysload=0.29 cputime=50.849 memavail=717200 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 1039.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15500 bytes_read=43099 bytes_retransmit=9 bytes_invalid=0 send_seq=1174 receive_seq=1174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996977 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=42.9 mcu_temp: temp=29.9  sysload=0.29 cputime=50.882 memavail=716696 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 1040.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15541 bytes_read=43259 bytes_retransmit=9 bytes_invalid=0 send_seq=1178 receive_seq=1178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=42.4 mcu_temp: temp=29.8  sysload=0.29 cputime=50.914 memavail=716452 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 1041.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15566 bytes_read=43429 bytes_retransmit=9 bytes_invalid=0 send_seq=1181 receive_seq=1181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996972 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=42.3 mcu_temp: temp=29.9  sysload=0.27 cputime=50.947 memavail=716204 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 1042.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15623 bytes_read=43622 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996969 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=42.3 mcu_temp: temp=29.8  sysload=0.27 cputime=50.980 memavail=716152 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.484
Stats 1043.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15648 bytes_read=43792 bytes_retransmit=9 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996966 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=42.3 mcu_temp: temp=30.0  sysload=0.27 cputime=51.011 memavail=715828 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 1044.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15705 bytes_read=43986 bytes_retransmit=9 bytes_invalid=0 send_seq=1194 receive_seq=1194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996963 heater_bed: target=60 temp=60.0 pwm=0.181 raspberry_pi: temp=42.7 mcu_temp: temp=29.8  sysload=0.27 cputime=51.046 memavail=714824 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 1045.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15762 bytes_read=44165 bytes_retransmit=9 bytes_invalid=0 send_seq=1199 receive_seq=1199 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=42.4 mcu_temp: temp=30.0  sysload=0.27 cputime=51.078 memavail=714860 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 1046.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15835 bytes_read=44335 bytes_retransmit=9 bytes_invalid=0 send_seq=1205 receive_seq=1205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996959 heater_bed: target=60 temp=60.0 pwm=0.286 raspberry_pi: temp=42.7 mcu_temp: temp=29.8  sysload=0.24 cputime=51.111 memavail=714608 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.457
Stats 1047.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=15876 bytes_read=44524 bytes_retransmit=9 bytes_invalid=0 send_seq=1209 receive_seq=1209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=42.4 mcu_temp: temp=29.9  sysload=0.24 cputime=51.143 memavail=714860 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.457
Stats 1048.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=15933 bytes_read=44718 bytes_retransmit=9 bytes_invalid=0 send_seq=1214 receive_seq=1214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.222 raspberry_pi: temp=42.5 mcu_temp: temp=29.9  sysload=0.24 cputime=51.176 memavail=714840 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.457
Stats 1049.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=15958 bytes_read=44873 bytes_retransmit=9 bytes_invalid=0 send_seq=1217 receive_seq=1217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.222 raspberry_pi: temp=42.6 mcu_temp: temp=29.9  sysload=0.24 cputime=51.207 memavail=714888 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.457
Stats 1050.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=15999 bytes_read=45062 bytes_retransmit=9 bytes_invalid=0 send_seq=1221 receive_seq=1221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.222 raspberry_pi: temp=42.5 mcu_temp: temp=29.8  sysload=0.24 cputime=51.240 memavail=714644 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 1051.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=16056 bytes_read=45241 bytes_retransmit=9 bytes_invalid=0 send_seq=1226 receive_seq=1226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=42.5 mcu_temp: temp=29.8  sysload=0.22 cputime=51.273 memavail=715060 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 1052.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=16081 bytes_read=45396 bytes_retransmit=9 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=42.5 mcu_temp: temp=30.0  sysload=0.22 cputime=51.304 memavail=715712 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 1053.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16155 bytes_read=45621 bytes_retransmit=9 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.288 raspberry_pi: temp=42.7 mcu_temp: temp=29.9  sysload=0.22 cputime=51.341 memavail=715908 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 1054.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16234 bytes_read=45800 bytes_retransmit=9 bytes_invalid=0 send_seq=1240 receive_seq=1240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=42.5 mcu_temp: temp=29.9  sysload=0.22 cputime=51.375 memavail=716284 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1055.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16275 bytes_read=45960 bytes_retransmit=9 bytes_invalid=0 send_seq=1244 receive_seq=1244 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.193 raspberry_pi: temp=42.7 mcu_temp: temp=29.8  sysload=0.22 cputime=51.408 memavail=715708 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1056.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16311 bytes_read=46144 bytes_retransmit=9 bytes_invalid=0 send_seq=1247 receive_seq=1247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=42.1 mcu_temp: temp=29.8  sysload=0.21 cputime=51.441 memavail=715816 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1057.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=16336 bytes_read=46310 bytes_retransmit=9 bytes_invalid=0 send_seq=1250 receive_seq=1250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=42.7 mcu_temp: temp=30.0  sysload=0.21 cputime=51.473 memavail=715816 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1058.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=16361 bytes_read=46470 bytes_retransmit=9 bytes_invalid=0 send_seq=1253 receive_seq=1253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=42.3 mcu_temp: temp=29.9  sysload=0.21 cputime=51.505 memavail=716588 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.469
Stats 1059.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=16402 bytes_read=46656 bytes_retransmit=9 bytes_invalid=0 send_seq=1257 receive_seq=1257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=43.2 mcu_temp: temp=29.9  sysload=0.21 cputime=51.539 memavail=716624 print_time=18.966 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 1060.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=16990 bytes_read=47179 bytes_retransmit=9 bytes_invalid=0 send_seq=1282 receive_seq=1282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.185 raspberry_pi: temp=42.3 mcu_temp: temp=30.0  sysload=0.21 cputime=51.629 memavail=716412 print_time=242.080 buffer_time=9.361 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 1061.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=17059 bytes_read=47385 bytes_retransmit=9 bytes_invalid=0 send_seq=1288 receive_seq=1288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.257 raspberry_pi: temp=43.1 mcu_temp: temp=29.8  sysload=0.19 cputime=51.668 memavail=716420 print_time=242.080 buffer_time=8.361 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 1062.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=17112 bytes_read=47615 bytes_retransmit=9 bytes_invalid=0 send_seq=1293 receive_seq=1293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.257 raspberry_pi: temp=42.9 mcu_temp: temp=30.0  sysload=0.19 cputime=51.708 memavail=716448 print_time=242.080 buffer_time=7.360 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 1063.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=17197 bytes_read=47855 bytes_retransmit=9 bytes_invalid=0 send_seq=1300 receive_seq=1300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.178 raspberry_pi: temp=42.7 mcu_temp: temp=29.7  sysload=0.19 cputime=51.749 memavail=716776 print_time=242.080 buffer_time=6.359 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1064.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=17266 bytes_read=48061 bytes_retransmit=9 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=42.8 mcu_temp: temp=29.8  sysload=0.19 cputime=51.786 memavail=716764 print_time=242.080 buffer_time=5.359 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1065.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=17335 bytes_read=48296 bytes_retransmit=9 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.188 raspberry_pi: temp=42.3 mcu_temp: temp=29.8  sysload=0.19 cputime=51.827 memavail=716520 print_time=242.080 buffer_time=4.359 print_stall=0 extruder: target=200 temp=199.8 pwm=0.507
Stats 1066.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=17436 bytes_read=48526 bytes_retransmit=9 bytes_invalid=0 send_seq=1320 receive_seq=1320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.214 raspberry_pi: temp=43.0 mcu_temp: temp=29.8  sysload=0.17 cputime=51.866 memavail=716572 print_time=242.080 buffer_time=3.358 print_stall=0 extruder: target=200 temp=199.7 pwm=0.570
Stats 1067.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000027 bytes_write=17489 bytes_read=48727 bytes_retransmit=9 bytes_invalid=0 send_seq=1325 receive_seq=1325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.214 raspberry_pi: temp=43.0 mcu_temp: temp=29.9  sysload=0.17 cputime=51.907 memavail=716828 print_time=242.080 buffer_time=2.357 print_stall=0 extruder: target=200 temp=199.5 pwm=0.570
Stats 1068.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=17590 bytes_read=48987 bytes_retransmit=9 bytes_invalid=0 send_seq=1333 receive_seq=1333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=42.3 mcu_temp: temp=30.0  sysload=0.17 cputime=51.948 memavail=716760 print_time=242.080 buffer_time=1.356 print_stall=0 extruder: target=200 temp=199.4 pwm=0.636
Stats 1069.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=17670 bytes_read=49207 bytes_retransmit=9 bytes_invalid=0 send_seq=1339 receive_seq=1339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.277 raspberry_pi: temp=43.0 mcu_temp: temp=30.0  sysload=0.17 cputime=51.986 memavail=716760 print_time=242.080 buffer_time=0.356 print_stall=0 extruder: target=200 temp=199.3 pwm=0.636
Stats 1070.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=17755 bytes_read=49418 bytes_retransmit=9 bytes_invalid=0 send_seq=1346 receive_seq=1346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.255 raspberry_pi: temp=42.7 mcu_temp: temp=30.0  sysload=0.17 cputime=52.026 memavail=716300 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.636
Stats 1071.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=17831 bytes_read=49648 bytes_retransmit=9 bytes_invalid=0 send_seq=1351 receive_seq=1351 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.255 raspberry_pi: temp=42.3 mcu_temp: temp=30.0  sysload=0.16 cputime=52.066 memavail=716328 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.636
Stats 1072.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=17932 bytes_read=49878 bytes_retransmit=9 bytes_invalid=0 send_seq=1359 receive_seq=1359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.263 raspberry_pi: temp=42.3 mcu_temp: temp=30.0  sysload=0.16 cputime=52.105 memavail=716528 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.604
Stats 1073.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=18017 bytes_read=50104 bytes_retransmit=9 bytes_invalid=0 send_seq=1366 receive_seq=1366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.253 raspberry_pi: temp=42.5 mcu_temp: temp=29.9  sysload=0.16 cputime=52.147 memavail=716860 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.604
Stats 1074.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=18086 bytes_read=50339 bytes_retransmit=9 bytes_invalid=0 send_seq=1372 receive_seq=1372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.253 raspberry_pi: temp=42.4 mcu_temp: temp=30.1  sysload=0.16 cputime=52.185 memavail=717124 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.546
Stats 1075.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=18155 bytes_read=50559 bytes_retransmit=9 bytes_invalid=0 send_seq=1378 receive_seq=1378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.253 raspberry_pi: temp=42.4 mcu_temp: temp=30.1  sysload=0.16 cputime=52.223 memavail=716832 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.490
Stats 1076.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=18219 bytes_read=50760 bytes_retransmit=9 bytes_invalid=0 send_seq=1383 receive_seq=1383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.253 raspberry_pi: temp=42.1 mcu_temp: temp=30.1  sysload=0.15 cputime=52.265 memavail=717392 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.490
Stats 1077.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=18304 bytes_read=51000 bytes_retransmit=9 bytes_invalid=0 send_seq=1390 receive_seq=1390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.193 raspberry_pi: temp=42.7 mcu_temp: temp=30.0  sysload=0.15 cputime=52.305 memavail=717392 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.424
Stats 1078.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=18373 bytes_read=51220 bytes_retransmit=9 bytes_invalid=0 send_seq=1396 receive_seq=1396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.278 raspberry_pi: temp=42.7 mcu_temp: temp=30.0  sysload=0.15 cputime=52.344 memavail=717484 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.424
Stats 1079.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=18458 bytes_read=51446 bytes_retransmit=9 bytes_invalid=0 send_seq=1403 receive_seq=1403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.248 raspberry_pi: temp=42.7 mcu_temp: temp=30.0  sysload=0.15 cputime=52.384 memavail=717684 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.424
Stats 1080.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=18511 bytes_read=51676 bytes_retransmit=9 bytes_invalid=0 send_seq=1408 receive_seq=1408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.248 raspberry_pi: temp=42.4 mcu_temp: temp=30.0  sysload=0.15 cputime=52.427 memavail=717260 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.424
Stats 1081.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=18591 bytes_read=51896 bytes_retransmit=9 bytes_invalid=0 send_seq=1414 receive_seq=1414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=42.9 mcu_temp: temp=30.1  sysload=0.13 cputime=52.466 memavail=717268 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.416
Stats 1082.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=18679 bytes_read=52112 bytes_retransmit=9 bytes_invalid=0 send_seq=1422 receive_seq=1422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=42.5 mcu_temp: temp=30.0  sysload=0.13 cputime=52.506 memavail=717268 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.416
Stats 1083.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=18764 bytes_read=52343 bytes_retransmit=9 bytes_invalid=0 send_seq=1429 receive_seq=1429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.254 raspberry_pi: temp=42.4 mcu_temp: temp=30.3  sysload=0.13 cputime=52.546 memavail=716832 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.416
Stats 1084.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18817 bytes_read=52564 bytes_retransmit=9 bytes_invalid=0 send_seq=1434 receive_seq=1434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.254 raspberry_pi: temp=42.7 mcu_temp: temp=30.1  sysload=0.13 cputime=52.586 memavail=717032 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.416
Stats 1085.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18905 bytes_read=52780 bytes_retransmit=9 bytes_invalid=0 send_seq=1442 receive_seq=1442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.254 raspberry_pi: temp=42.7 mcu_temp: temp=30.1  sysload=0.13 cputime=52.627 memavail=717364 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.484
Stats 1086.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=18990 bytes_read=53020 bytes_retransmit=9 bytes_invalid=0 send_seq=1449 receive_seq=1449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=42.6 mcu_temp: temp=30.1  sysload=0.12 cputime=52.668 memavail=717652 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.484
Stats 1087.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=19075 bytes_read=53245 bytes_retransmit=9 bytes_invalid=0 send_seq=1456 receive_seq=1456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=43.2 mcu_temp: temp=30.1  sysload=0.12 cputime=52.707 memavail=717860 print_time=242.080 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.484
Stats 1088.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=19388 bytes_read=53471 bytes_retransmit=9 bytes_invalid=0 send_seq=1466 receive_seq=1466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=42.8 mcu_temp: temp=30.3  sysload=0.12 cputime=52.752 memavail=718172 print_time=270.732 buffer_time=9.996 print_stall=0 extruder: target=200 temp=200.2 pwm=0.484
Stats 1089.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=19468 bytes_read=53721 bytes_retransmit=9 bytes_invalid=0 send_seq=1472 receive_seq=1472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.260 raspberry_pi: temp=43.0 mcu_temp: temp=30.3  sysload=0.12 cputime=52.793 memavail=718568 print_time=270.732 buffer_time=8.996 print_stall=0 extruder: target=200 temp=200.2 pwm=0.523
Stats 1090.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=19521 bytes_read=53936 bytes_retransmit=9 bytes_invalid=0 send_seq=1477 receive_seq=1477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.260 raspberry_pi: temp=42.1 mcu_temp: temp=30.0  sysload=0.12 cputime=52.831 memavail=718596 print_time=270.732 buffer_time=7.995 print_stall=0 extruder: target=200 temp=200.1 pwm=0.523
Stats 1091.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=19606 bytes_read=54147 bytes_retransmit=9 bytes_invalid=0 send_seq=1484 receive_seq=1484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=42.7 mcu_temp: temp=30.1  sysload=0.35 cputime=52.871 memavail=718608 print_time=270.732 buffer_time=6.995 print_stall=0 extruder: target=200 temp=200.1 pwm=0.523
Stats 1092.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=19659 bytes_read=54377 bytes_retransmit=9 bytes_invalid=0 send_seq=1489 receive_seq=1489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=42.6 mcu_temp: temp=30.2  sysload=0.35 cputime=52.909 memavail=718860 print_time=270.732 buffer_time=5.994 print_stall=0 extruder: target=200 temp=200.1 pwm=0.523
Stats 1093.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=19728 bytes_read=54597 bytes_retransmit=9 bytes_invalid=0 send_seq=1495 receive_seq=1495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=43.1 mcu_temp: temp=30.2  sysload=0.35 cputime=52.949 memavail=718188 print_time=270.732 buffer_time=4.994 print_stall=0 extruder: target=200 temp=200.0 pwm=0.523
Stats 1094.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=19797 bytes_read=54818 bytes_retransmit=9 bytes_invalid=0 send_seq=1501 receive_seq=1501 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=43.0 mcu_temp: temp=30.3  sysload=0.35 cputime=52.987 memavail=718188 print_time=270.732 buffer_time=3.993 print_stall=0 extruder: target=200 temp=199.9 pwm=0.523
Stats 1095.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=19861 bytes_read=55048 bytes_retransmit=9 bytes_invalid=0 send_seq=1506 receive_seq=1506 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=42.6 mcu_temp: temp=30.2  sysload=0.35 cputime=53.026 memavail=718188 print_time=270.732 buffer_time=2.993 print_stall=0 extruder: target=200 temp=199.8 pwm=0.573
Stats 1096.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=19946 bytes_read=55273 bytes_retransmit=9 bytes_invalid=0 send_seq=1513 receive_seq=1513 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=60 temp=60.0 pwm=0.288 raspberry_pi: temp=42.6 mcu_temp: temp=30.2  sysload=0.33 cputime=53.065 memavail=717936 print_time=270.732 buffer_time=1.992 print_stall=0 extruder: target=200 temp=199.6 pwm=0.627
Stats 1097.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=20015 bytes_read=55479 bytes_retransmit=9 bytes_invalid=0 send_seq=1519 receive_seq=1519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=60 temp=60.0 pwm=0.218 raspberry_pi: temp=42.7 mcu_temp: temp=30.2  sysload=0.33 cputime=53.104 memavail=717896 print_time=270.732 buffer_time=0.991 print_stall=0 extruder: target=200 temp=199.5 pwm=0.627
Stats 1098.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=20121 bytes_read=55729 bytes_retransmit=9 bytes_invalid=0 send_seq=1528 receive_seq=1528 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=60 temp=60.0 pwm=0.248 raspberry_pi: temp=42.7 mcu_temp: temp=30.2  sysload=0.33 cputime=53.147 memavail=718032 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.627
Stats 1099.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20207 bytes_read=55969 bytes_retransmit=9 bytes_invalid=0 send_seq=1535 receive_seq=1535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=60 temp=60.0 pwm=0.248 raspberry_pi: temp=43.0 mcu_temp: temp=30.3  sysload=0.33 cputime=53.186 memavail=717780 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.627
Stats 1100.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20276 bytes_read=56175 bytes_retransmit=9 bytes_invalid=0 send_seq=1541 receive_seq=1541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=60 temp=60.0 pwm=0.248 raspberry_pi: temp=42.9 mcu_temp: temp=30.2  sysload=0.33 cputime=53.225 memavail=718108 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.596
Stats 1101.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20361 bytes_read=56415 bytes_retransmit=9 bytes_invalid=0 send_seq=1548 receive_seq=1548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=60 temp=60.0 pwm=0.252 raspberry_pi: temp=42.8 mcu_temp: temp=30.4  sysload=0.30 cputime=53.264 memavail=717412 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.596
Stats 1102.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20473 bytes_read=56645 bytes_retransmit=9 bytes_invalid=0 send_seq=1556 receive_seq=1556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=43.5 mcu_temp: temp=30.4  sysload=0.30 cputime=53.303 memavail=717420 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.544
Stats 1103.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20563 bytes_read=56861 bytes_retransmit=9 bytes_invalid=0 send_seq=1564 receive_seq=1564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 heater_bed: target=60 temp=60.0 pwm=0.236 raspberry_pi: temp=43.1 mcu_temp: temp=30.1  sysload=0.30 cputime=53.344 memavail=716708 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.544
Stats 1104.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=20659 bytes_read=57116 bytes_retransmit=9 bytes_invalid=0 send_seq=1571 receive_seq=1571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.0 pwm=0.216 raspberry_pi: temp=43.4 mcu_temp: temp=30.2  sysload=0.30 cputime=53.381 memavail=716760 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.473
Stats 1105.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=20739 bytes_read=57336 bytes_retransmit=9 bytes_invalid=0 send_seq=1577 receive_seq=1577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996972 heater_bed: target=60 temp=60.0 pwm=0.279 raspberry_pi: temp=43.5 mcu_temp: temp=30.1  sysload=0.30 cputime=53.419 memavail=716508 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.408
Stats 1106.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=20819 bytes_read=57542 bytes_retransmit=9 bytes_invalid=0 send_seq=1583 receive_seq=1583 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996972 heater_bed: target=60 temp=60.0 pwm=0.259 raspberry_pi: temp=42.9 mcu_temp: temp=30.3  sysload=0.27 cputime=53.458 memavail=716260 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.408
Stats 1107.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=20872 bytes_read=57772 bytes_retransmit=9 bytes_invalid=0 send_seq=1588 receive_seq=1588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996969 heater_bed: target=60 temp=60.0 pwm=0.259 raspberry_pi: temp=43.6 mcu_temp: temp=30.3  sysload=0.27 cputime=53.496 memavail=716268 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.408
Stats 1108.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000024 bytes_write=20952 bytes_read=57989 bytes_retransmit=9 bytes_invalid=0 send_seq=1594 receive_seq=1594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=60 temp=60.0 pwm=0.241 raspberry_pi: temp=43.1 mcu_temp: temp=30.2  sysload=0.27 cputime=53.536 memavail=716268 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.408
Stats 1109.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21005 bytes_read=58195 bytes_retransmit=9 bytes_invalid=0 send_seq=1599 receive_seq=1599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996965 heater_bed: target=60 temp=60.0 pwm=0.241 raspberry_pi: temp=43.4 mcu_temp: temp=30.2  sysload=0.27 cputime=53.573 memavail=716016 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.408
Stats 1110.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21110 bytes_read=58443 bytes_retransmit=9 bytes_invalid=0 send_seq=1606 receive_seq=1606 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996964 heater_bed: target=60 temp=60.0 pwm=0.232 raspberry_pi: temp=42.6 mcu_temp: temp=30.3  sysload=0.27 cputime=53.613 memavail=716016 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.422
Stats 1111.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21163 bytes_read=58644 bytes_retransmit=9 bytes_invalid=0 send_seq=1611 receive_seq=1611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=60 temp=60.0 pwm=0.232 raspberry_pi: temp=43.1 mcu_temp: temp=30.4  sysload=0.25 cputime=53.650 memavail=716016 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.422
Stats 1112.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21216 bytes_read=58845 bytes_retransmit=9 bytes_invalid=0 send_seq=1616 receive_seq=1616 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=60.0 pwm=0.232 raspberry_pi: temp=43.1 mcu_temp: temp=30.3  sysload=0.25 cputime=53.688 memavail=716024 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.422
Stats 1113.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21320 bytes_read=59109 bytes_retransmit=9 bytes_invalid=0 send_seq=1625 receive_seq=1625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.309 raspberry_pi: temp=42.6 mcu_temp: temp=30.3  sysload=0.25 cputime=53.728 memavail=715088 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.493
Stats 1114.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21384 bytes_read=59325 bytes_retransmit=9 bytes_invalid=0 send_seq=1630 receive_seq=1630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=43.1 mcu_temp: temp=30.4  sysload=0.25 cputime=53.767 memavail=715660 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.493
Stats 1115.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21491 bytes_read=59557 bytes_retransmit=9 bytes_invalid=0 send_seq=1639 receive_seq=1639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996963 heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=42.9 mcu_temp: temp=30.2  sysload=0.25 cputime=53.806 memavail=715884 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.493
Stats 1116.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21560 bytes_read=59806 bytes_retransmit=9 bytes_invalid=0 send_seq=1645 receive_seq=1645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.289 raspberry_pi: temp=42.7 mcu_temp: temp=30.4  sysload=0.23 cputime=53.845 memavail=716176 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 1117.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21656 bytes_read=60017 bytes_retransmit=9 bytes_invalid=0 send_seq=1652 receive_seq=1652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=43.0 mcu_temp: temp=30.3  sysload=0.23 cputime=53.883 memavail=716400 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.512
Stats 1118.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21725 bytes_read=60223 bytes_retransmit=9 bytes_invalid=0 send_seq=1658 receive_seq=1658 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=42.7 mcu_temp: temp=30.4  sysload=0.23 cputime=53.921 memavail=716436 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.512
Stats 1119.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21789 bytes_read=60482 bytes_retransmit=9 bytes_invalid=0 send_seq=1663 receive_seq=1663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=43.5 mcu_temp: temp=30.4  sysload=0.23 cputime=53.960 memavail=716436 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.512
Stats 1120.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21842 bytes_read=60683 bytes_retransmit=9 bytes_invalid=0 send_seq=1668 receive_seq=1668 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=43.1 mcu_temp: temp=30.2  sysload=0.23 cputime=53.997 memavail=716436 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.512
Stats 1121.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21927 bytes_read=60894 bytes_retransmit=9 bytes_invalid=0 send_seq=1675 receive_seq=1675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.192 raspberry_pi: temp=43.1 mcu_temp: temp=30.3  sysload=0.21 cputime=54.038 memavail=716384 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1122.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=21996 bytes_read=61143 bytes_retransmit=9 bytes_invalid=0 send_seq=1681 receive_seq=1681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=43.0 mcu_temp: temp=30.4  sysload=0.21 cputime=54.078 memavail=716476 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1123.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22049 bytes_read=61344 bytes_retransmit=9 bytes_invalid=0 send_seq=1686 receive_seq=1686 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=43.4 mcu_temp: temp=30.4  sysload=0.21 cputime=54.116 memavail=716036 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1124.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22102 bytes_read=61560 bytes_retransmit=9 bytes_invalid=0 send_seq=1691 receive_seq=1691 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=43.1 mcu_temp: temp=30.4  sysload=0.21 cputime=54.153 memavail=716140 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.482
Stats 1125.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22155 bytes_read=61804 bytes_retransmit=9 bytes_invalid=0 send_seq=1696 receive_seq=1696 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=42.3 mcu_temp: temp=30.5  sysload=0.21 cputime=54.193 memavail=716400 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1126.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22224 bytes_read=62010 bytes_retransmit=9 bytes_invalid=0 send_seq=1702 receive_seq=1702 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=42.9 mcu_temp: temp=30.2  sysload=0.20 cputime=54.230 memavail=716348 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1127.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22293 bytes_read=62231 bytes_retransmit=9 bytes_invalid=0 send_seq=1708 receive_seq=1708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=43.0 mcu_temp: temp=30.4  sysload=0.20 cputime=54.268 memavail=716908 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1128.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22362 bytes_read=62465 bytes_retransmit=9 bytes_invalid=0 send_seq=1714 receive_seq=1714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.272 raspberry_pi: temp=42.7 mcu_temp: temp=30.4  sysload=0.20 cputime=54.307 memavail=716456 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1129.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22426 bytes_read=62681 bytes_retransmit=9 bytes_invalid=0 send_seq=1719 receive_seq=1719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.205 raspberry_pi: temp=43.0 mcu_temp: temp=30.3  sysload=0.20 cputime=54.344 memavail=716820 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1130.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22522 bytes_read=62907 bytes_retransmit=9 bytes_invalid=0 send_seq=1726 receive_seq=1726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996934 heater_bed: target=60 temp=60.0 pwm=0.289 raspberry_pi: temp=42.6 mcu_temp: temp=30.4  sysload=0.20 cputime=54.383 memavail=717320 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1131.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22607 bytes_read=63146 bytes_retransmit=9 bytes_invalid=0 send_seq=1733 receive_seq=1733 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.231 raspberry_pi: temp=42.7 mcu_temp: temp=30.4  sysload=0.18 cputime=54.423 memavail=717324 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1132.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22660 bytes_read=63347 bytes_retransmit=9 bytes_invalid=0 send_seq=1738 receive_seq=1738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.231 raspberry_pi: temp=42.7 mcu_temp: temp=30.4  sysload=0.18 cputime=54.462 memavail=717588 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1133.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22745 bytes_read=63573 bytes_retransmit=9 bytes_invalid=0 send_seq=1745 receive_seq=1745 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.272 raspberry_pi: temp=43.4 mcu_temp: temp=30.5  sysload=0.18 cputime=54.501 memavail=717604 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1134.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22830 bytes_read=63818 bytes_retransmit=9 bytes_invalid=0 send_seq=1752 receive_seq=1752 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=43.1 mcu_temp: temp=30.6  sysload=0.18 cputime=54.540 memavail=718224 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 1135.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22899 bytes_read=64014 bytes_retransmit=9 bytes_invalid=0 send_seq=1758 receive_seq=1758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.279 raspberry_pi: temp=42.7 mcu_temp: temp=30.5  sysload=0.18 cputime=54.577 memavail=717976 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 1136.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=22968 bytes_read=64235 bytes_retransmit=9 bytes_invalid=0 send_seq=1764 receive_seq=1764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.223 raspberry_pi: temp=42.7 mcu_temp: temp=30.6  sysload=0.25 cputime=54.615 memavail=717976 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 1137.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23021 bytes_read=64464 bytes_retransmit=9 bytes_invalid=0 send_seq=1769 receive_seq=1769 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=60.0 pwm=0.223 raspberry_pi: temp=43.1 mcu_temp: temp=30.7  sysload=0.25 cputime=54.653 memavail=717984 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.493
Stats 1138.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23101 bytes_read=64670 bytes_retransmit=9 bytes_invalid=0 send_seq=1775 receive_seq=1775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.274 raspberry_pi: temp=43.6 mcu_temp: temp=30.5  sysload=0.25 cputime=54.693 memavail=718344 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1139.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23170 bytes_read=64906 bytes_retransmit=9 bytes_invalid=0 send_seq=1781 receive_seq=1781 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=42.7 mcu_temp: temp=30.6  sysload=0.25 cputime=54.731 memavail=718548 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 1140.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23223 bytes_read=65135 bytes_retransmit=9 bytes_invalid=0 send_seq=1786 receive_seq=1786 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=42.7 mcu_temp: temp=30.6  sysload=0.25 cputime=54.769 memavail=718600 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1141.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23287 bytes_read=65336 bytes_retransmit=9 bytes_invalid=0 send_seq=1791 receive_seq=1791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=60.0 pwm=0.265 raspberry_pi: temp=42.7 mcu_temp: temp=30.6  sysload=0.23 cputime=54.805 memavail=718852 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1142.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23372 bytes_read=65562 bytes_retransmit=9 bytes_invalid=0 send_seq=1798 receive_seq=1798 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=60.0 pwm=0.200 raspberry_pi: temp=43.3 mcu_temp: temp=30.4  sysload=0.23 cputime=54.846 memavail=719112 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Stats 1143.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23425 bytes_read=65791 bytes_retransmit=9 bytes_invalid=0 send_seq=1803 receive_seq=1803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=60 temp=60.0 pwm=0.200 raspberry_pi: temp=43.2 mcu_temp: temp=30.4  sysload=0.23 cputime=54.886 memavail=719260 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.486
Stats 1144.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23489 bytes_read=66007 bytes_retransmit=9 bytes_invalid=0 send_seq=1808 receive_seq=1808 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=60.0 pwm=0.250 raspberry_pi: temp=43.6 mcu_temp: temp=30.6  sysload=0.23 cputime=54.923 memavail=719384 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.486
Stats 1145.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23558 bytes_read=66228 bytes_retransmit=9 bytes_invalid=0 send_seq=1814 receive_seq=1814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=60.0 pwm=0.265 raspberry_pi: temp=43.2 mcu_temp: temp=30.6  sysload=0.23 cputime=54.962 memavail=719512 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.486
Stats 1146.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23659 bytes_read=66472 bytes_retransmit=9 bytes_invalid=0 send_seq=1822 receive_seq=1822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.246 raspberry_pi: temp=43.1 mcu_temp: temp=30.5  sysload=0.21 cputime=55.004 memavail=719516 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.513
Stats 1147.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23728 bytes_read=66678 bytes_retransmit=9 bytes_invalid=0 send_seq=1828 receive_seq=1828 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.246 raspberry_pi: temp=43.0 mcu_temp: temp=30.5  sysload=0.21 cputime=55.045 memavail=719772 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.513
Stats 1148.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23781 bytes_read=66894 bytes_retransmit=9 bytes_invalid=0 send_seq=1833 receive_seq=1833 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.246 raspberry_pi: temp=43.2 mcu_temp: temp=30.6  sysload=0.21 cputime=55.088 memavail=719152 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.513
Stats 1149.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23877 bytes_read=67148 bytes_retransmit=9 bytes_invalid=0 send_seq=1840 receive_seq=1840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=43.6 mcu_temp: temp=30.6  sysload=0.21 cputime=55.132 memavail=718900 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.463
Stats 1150.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23930 bytes_read=67349 bytes_retransmit=9 bytes_invalid=0 send_seq=1845 receive_seq=1845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=42.9 mcu_temp: temp=30.7  sysload=0.21 cputime=55.174 memavail=718900 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.463
Stats 1151.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=23983 bytes_read=67565 bytes_retransmit=9 bytes_invalid=0 send_seq=1850 receive_seq=1850 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=42.7 mcu_temp: temp=30.6  sysload=0.19 cputime=55.217 memavail=719152 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.463
Stats 1152.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24052 bytes_read=67799 bytes_retransmit=9 bytes_invalid=0 send_seq=1856 receive_seq=1856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=60 temp=60.0 pwm=0.190 raspberry_pi: temp=43.0 mcu_temp: temp=30.4  sysload=0.19 cputime=55.261 memavail=719408 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.463
Stats 1153.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24132 bytes_read=68005 bytes_retransmit=9 bytes_invalid=0 send_seq=1862 receive_seq=1862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=60 temp=60.0 pwm=0.265 raspberry_pi: temp=43.2 mcu_temp: temp=30.6  sysload=0.19 cputime=55.303 memavail=719932 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 1154.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24212 bytes_read=68241 bytes_retransmit=9 bytes_invalid=0 send_seq=1868 receive_seq=1868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=43.2 mcu_temp: temp=30.5  sysload=0.19 cputime=55.346 memavail=719708 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 1155.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24297 bytes_read=68480 bytes_retransmit=9 bytes_invalid=0 send_seq=1875 receive_seq=1875 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=42.7 mcu_temp: temp=30.4  sysload=0.19 cputime=55.389 memavail=719708 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 1156.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24350 bytes_read=68681 bytes_retransmit=9 bytes_invalid=0 send_seq=1880 receive_seq=1880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=42.5 mcu_temp: temp=30.5  sysload=0.17 cputime=55.430 memavail=719960 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 1157.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24446 bytes_read=68907 bytes_retransmit=9 bytes_invalid=0 send_seq=1887 receive_seq=1887 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=43.1 mcu_temp: temp=30.6  sysload=0.17 cputime=55.474 memavail=719468 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.497
Stats 1158.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24499 bytes_read=69136 bytes_retransmit=9 bytes_invalid=0 send_seq=1892 receive_seq=1892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=43.2 mcu_temp: temp=30.6  sysload=0.17 cputime=55.516 memavail=719444 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.497
Stats 1159.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24552 bytes_read=69352 bytes_retransmit=9 bytes_invalid=0 send_seq=1897 receive_seq=1897 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=60 temp=60.0 pwm=0.242 raspberry_pi: temp=43.4 mcu_temp: temp=30.8  sysload=0.17 cputime=55.561 memavail=719748 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.497
Stats 1160.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24632 bytes_read=69562 bytes_retransmit=9 bytes_invalid=0 send_seq=1903 receive_seq=1903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=60 temp=60.0 pwm=0.207 raspberry_pi: temp=43.0 mcu_temp: temp=30.4  sysload=0.17 cputime=55.604 memavail=719496 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.497
Stats 1161.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24701 bytes_read=69790 bytes_retransmit=9 bytes_invalid=0 send_seq=1909 receive_seq=1909 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996923 heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=43.2 mcu_temp: temp=30.6  sysload=0.16 cputime=55.647 memavail=719496 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 1162.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24770 bytes_read=69996 bytes_retransmit=9 bytes_invalid=0 send_seq=1915 receive_seq=1915 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=43.2 mcu_temp: temp=30.6  sysload=0.16 cputime=55.691 memavail=719256 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 1163.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24839 bytes_read=70217 bytes_retransmit=9 bytes_invalid=0 send_seq=1921 receive_seq=1921 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=42.9 mcu_temp: temp=30.8  sysload=0.16 cputime=55.736 memavail=720440 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 1164.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24924 bytes_read=70471 bytes_retransmit=9 bytes_invalid=0 send_seq=1928 receive_seq=1928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=60 temp=60.0 pwm=0.247 raspberry_pi: temp=44.0 mcu_temp: temp=30.7  sysload=0.16 cputime=55.778 memavail=720188 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 1165.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=24977 bytes_read=70672 bytes_retransmit=9 bytes_invalid=0 send_seq=1933 receive_seq=1933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=60 temp=60.0 pwm=0.247 raspberry_pi: temp=43.6 mcu_temp: temp=30.6  sysload=0.16 cputime=55.818 memavail=720188 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 1166.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25052 bytes_read=70888 bytes_retransmit=9 bytes_invalid=0 send_seq=1938 receive_seq=1938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996926 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=43.5 mcu_temp: temp=30.6  sysload=0.15 cputime=55.862 memavail=720136 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.458
Stats 1167.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25121 bytes_read=71122 bytes_retransmit=9 bytes_invalid=0 send_seq=1944 receive_seq=1944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=43.6 mcu_temp: temp=30.6  sysload=0.15 cputime=55.904 memavail=719896 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.458
Stats 1168.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25190 bytes_read=71328 bytes_retransmit=9 bytes_invalid=0 send_seq=1950 receive_seq=1950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=43.0 mcu_temp: temp=30.6  sysload=0.15 cputime=55.948 memavail=719612 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.458
Stats 1169.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25259 bytes_read=71564 bytes_retransmit=9 bytes_invalid=0 send_seq=1956 receive_seq=1956 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996929 heater_bed: target=60 temp=60.0 pwm=0.316 raspberry_pi: temp=43.2 mcu_temp: temp=30.6  sysload=0.15 cputime=55.992 memavail=719612 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.458
Stats 1170.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25371 bytes_read=71808 bytes_retransmit=9 bytes_invalid=0 send_seq=1964 receive_seq=1964 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=43.4 mcu_temp: temp=30.7  sysload=0.15 cputime=56.035 memavail=719696 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.472
Stats 1171.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25440 bytes_read=72014 bytes_retransmit=9 bytes_invalid=0 send_seq=1970 receive_seq=1970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=43.2 mcu_temp: temp=30.7  sysload=0.14 cputime=56.077 memavail=719656 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.472
Stats 1172.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25520 bytes_read=72235 bytes_retransmit=9 bytes_invalid=0 send_seq=1976 receive_seq=1976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=43.1 mcu_temp: temp=30.8  sysload=0.14 cputime=56.120 memavail=719724 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.472
Stats 1173.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25589 bytes_read=72469 bytes_retransmit=9 bytes_invalid=0 send_seq=1982 receive_seq=1982 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=60 temp=60.0 pwm=0.267 raspberry_pi: temp=43.3 mcu_temp: temp=30.7  sysload=0.14 cputime=56.166 memavail=719396 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.472
Stats 1174.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25674 bytes_read=72695 bytes_retransmit=9 bytes_invalid=0 send_seq=1989 receive_seq=1989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=43.7 mcu_temp: temp=30.7  sysload=0.14 cputime=56.207 memavail=719720 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.500
Stats 1175.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25727 bytes_read=72911 bytes_retransmit=9 bytes_invalid=0 send_seq=1994 receive_seq=1994 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=43.8 mcu_temp: temp=30.6  sysload=0.14 cputime=56.250 memavail=720168 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.500
Stats 1176.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25780 bytes_read=73140 bytes_retransmit=9 bytes_invalid=0 send_seq=1999 receive_seq=1999 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=43.6 mcu_temp: temp=30.8  sysload=0.12 cputime=56.291 memavail=720000 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.500
Stats 1177.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25855 bytes_read=73362 bytes_retransmit=9 bytes_invalid=0 send_seq=2006 receive_seq=2006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.284 raspberry_pi: temp=43.5 mcu_temp: temp=30.7  sysload=0.12 cputime=56.333 memavail=719700 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.500
Stats 1178.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25940 bytes_read=73588 bytes_retransmit=9 bytes_invalid=0 send_seq=2013 receive_seq=2013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=44.0 mcu_temp: temp=30.8  sysload=0.12 cputime=56.377 memavail=720020 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 1179.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=25993 bytes_read=73832 bytes_retransmit=9 bytes_invalid=0 send_seq=2018 receive_seq=2018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=43.6 mcu_temp: temp=30.7  sysload=0.12 cputime=56.419 memavail=720228 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 1180.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26078 bytes_read=74043 bytes_retransmit=9 bytes_invalid=0 send_seq=2025 receive_seq=2025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=42.8 mcu_temp: temp=30.8  sysload=0.12 cputime=56.462 memavail=720528 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 1181.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26131 bytes_read=74259 bytes_retransmit=9 bytes_invalid=0 send_seq=2030 receive_seq=2030 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=42.8 mcu_temp: temp=30.9  sysload=0.11 cputime=56.503 memavail=720276 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 1182.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26184 bytes_read=74488 bytes_retransmit=9 bytes_invalid=0 send_seq=2035 receive_seq=2035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.251 raspberry_pi: temp=43.0 mcu_temp: temp=30.8  sysload=0.11 cputime=56.545 memavail=720052 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 1183.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26269 bytes_read=74699 bytes_retransmit=9 bytes_invalid=0 send_seq=2042 receive_seq=2042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.200 raspberry_pi: temp=43.2 mcu_temp: temp=30.7  sysload=0.11 cputime=56.589 memavail=718316 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 1184.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26354 bytes_read=74940 bytes_retransmit=9 bytes_invalid=0 send_seq=2049 receive_seq=2049 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=43.4 mcu_temp: temp=30.8  sysload=0.11 cputime=56.633 memavail=718676 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.471
Stats 1185.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26439 bytes_read=75172 bytes_retransmit=9 bytes_invalid=0 send_seq=2056 receive_seq=2056 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.225 raspberry_pi: temp=43.4 mcu_temp: temp=30.9  sysload=0.11 cputime=56.676 memavail=718424 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 1186.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26492 bytes_read=75363 bytes_retransmit=9 bytes_invalid=0 send_seq=2061 receive_seq=2061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.225 raspberry_pi: temp=42.8 mcu_temp: temp=30.8  sysload=0.10 cputime=56.717 memavail=719188 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 1187.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26577 bytes_read=75589 bytes_retransmit=9 bytes_invalid=0 send_seq=2068 receive_seq=2068 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.209 raspberry_pi: temp=43.2 mcu_temp: temp=30.8  sysload=0.10 cputime=56.761 memavail=719136 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.461
Stats 1188.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26646 bytes_read=75823 bytes_retransmit=9 bytes_invalid=0 send_seq=2074 receive_seq=2074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.209 raspberry_pi: temp=42.8 mcu_temp: temp=30.9  sysload=0.10 cputime=56.804 memavail=718840 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.461
Stats 1189.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26699 bytes_read=76039 bytes_retransmit=9 bytes_invalid=0 send_seq=2079 receive_seq=2079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.209 raspberry_pi: temp=43.8 mcu_temp: temp=30.9  sysload=0.10 cputime=56.847 memavail=718592 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.461
Stats 1190.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26784 bytes_read=76265 bytes_retransmit=9 bytes_invalid=0 send_seq=2086 receive_seq=2086 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.229 raspberry_pi: temp=43.4 mcu_temp: temp=30.8  sysload=0.10 cputime=56.892 memavail=719044 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.461
Stats 1191.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26869 bytes_read=76504 bytes_retransmit=9 bytes_invalid=0 send_seq=2093 receive_seq=2093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.229 raspberry_pi: temp=43.1 mcu_temp: temp=30.8  sysload=0.10 cputime=56.936 memavail=718844 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1192.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=26938 bytes_read=76710 bytes_retransmit=9 bytes_invalid=0 send_seq=2099 receive_seq=2099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.282 raspberry_pi: temp=42.8 mcu_temp: temp=31.0  sysload=0.10 cputime=56.979 memavail=718844 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1193.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27023 bytes_read=76936 bytes_retransmit=9 bytes_invalid=0 send_seq=2106 receive_seq=2106 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.286 raspberry_pi: temp=43.4 mcu_temp: temp=30.7  sysload=0.10 cputime=57.025 memavail=719232 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1194.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27108 bytes_read=77190 bytes_retransmit=9 bytes_invalid=0 send_seq=2113 receive_seq=2113 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.229 raspberry_pi: temp=43.5 mcu_temp: temp=30.6  sysload=0.10 cputime=57.070 memavail=718728 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1195.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27177 bytes_read=77396 bytes_retransmit=9 bytes_invalid=0 send_seq=2119 receive_seq=2119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=60.0 pwm=0.229 raspberry_pi: temp=43.6 mcu_temp: temp=30.8  sysload=0.10 cputime=57.113 memavail=719488 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.500
Stats 1196.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27257 bytes_read=77617 bytes_retransmit=9 bytes_invalid=0 send_seq=2125 receive_seq=2125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=60.0 pwm=0.277 raspberry_pi: temp=43.4 mcu_temp: temp=30.7  sysload=0.09 cputime=57.157 memavail=718732 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.500
Stats 1197.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27342 bytes_read=77856 bytes_retransmit=9 bytes_invalid=0 send_seq=2132 receive_seq=2132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=60.0 pwm=0.201 raspberry_pi: temp=43.2 mcu_temp: temp=30.8  sysload=0.09 cputime=57.201 memavail=719488 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.500
Stats 1198.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27395 bytes_read=78057 bytes_retransmit=9 bytes_invalid=0 send_seq=2137 receive_seq=2137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.0 pwm=0.201 raspberry_pi: temp=43.6 mcu_temp: temp=31.0  sysload=0.09 cputime=57.244 memavail=718128 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.500
Stats 1199.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27480 bytes_read=78298 bytes_retransmit=9 bytes_invalid=0 send_seq=2144 receive_seq=2144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.202 raspberry_pi: temp=43.4 mcu_temp: temp=31.0  sysload=0.09 cputime=57.288 memavail=718380 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.491
Stats 1200.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27565 bytes_read=78537 bytes_retransmit=9 bytes_invalid=0 send_seq=2151 receive_seq=2151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.253 raspberry_pi: temp=43.3 mcu_temp: temp=30.9  sysload=0.09 cputime=57.330 memavail=718632 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.491
Stats 1201.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27650 bytes_read=78748 bytes_retransmit=9 bytes_invalid=0 send_seq=2158 receive_seq=2158 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.203 raspberry_pi: temp=43.6 mcu_temp: temp=30.9  sysload=0.08 cputime=57.373 memavail=718128 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.491
Stats 1202.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27719 bytes_read=78969 bytes_retransmit=9 bytes_invalid=0 send_seq=2164 receive_seq=2164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=42.5 mcu_temp: temp=31.0  sysload=0.08 cputime=57.416 memavail=718636 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.491
Stats 1203.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27788 bytes_read=79203 bytes_retransmit=9 bytes_invalid=0 send_seq=2170 receive_seq=2170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=43.2 mcu_temp: temp=30.9  sysload=0.08 cputime=57.462 memavail=717012 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.469
Stats 1204.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27857 bytes_read=79424 bytes_retransmit=9 bytes_invalid=0 send_seq=2176 receive_seq=2176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.08 cputime=57.504 memavail=717768 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1205.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=27942 bytes_read=79664 bytes_retransmit=9 bytes_invalid=0 send_seq=2183 receive_seq=2183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.174 raspberry_pi: temp=43.6 mcu_temp: temp=30.8  sysload=0.08 cputime=57.547 memavail=717516 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1206.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28011 bytes_read=79884 bytes_retransmit=9 bytes_invalid=0 send_seq=2189 receive_seq=2189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.232 raspberry_pi: temp=43.6 mcu_temp: temp=31.0  sysload=0.07 cputime=57.590 memavail=717264 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1207.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28059 bytes_read=80080 bytes_retransmit=9 bytes_invalid=0 send_seq=2193 receive_seq=2193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.232 raspberry_pi: temp=43.4 mcu_temp: temp=31.1  sysload=0.07 cputime=57.631 memavail=717264 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1208.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28160 bytes_read=80325 bytes_retransmit=9 bytes_invalid=0 send_seq=2201 receive_seq=2201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=43.0 mcu_temp: temp=30.9  sysload=0.07 cputime=57.678 memavail=716136 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 1209.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28213 bytes_read=80555 bytes_retransmit=9 bytes_invalid=0 send_seq=2206 receive_seq=2206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=43.4 mcu_temp: temp=31.0  sysload=0.07 cputime=57.721 memavail=716652 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 1210.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28266 bytes_read=80756 bytes_retransmit=9 bytes_invalid=0 send_seq=2211 receive_seq=2211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.239 raspberry_pi: temp=43.8 mcu_temp: temp=31.0  sysload=0.07 cputime=57.764 memavail=716404 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 1211.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28367 bytes_read=80989 bytes_retransmit=9 bytes_invalid=0 send_seq=2219 receive_seq=2219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.218 raspberry_pi: temp=43.2 mcu_temp: temp=30.9  sysload=0.39 cputime=57.808 memavail=716152 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 1212.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28452 bytes_read=81208 bytes_retransmit=9 bytes_invalid=0 send_seq=2226 receive_seq=2226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.275 raspberry_pi: temp=43.2 mcu_temp: temp=30.9  sysload=0.39 cputime=57.841 memavail=715924 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.511
Stats 1213.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28505 bytes_read=81409 bytes_retransmit=9 bytes_invalid=0 send_seq=2231 receive_seq=2231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.275 raspberry_pi: temp=43.0 mcu_temp: temp=30.7  sysload=0.39 cputime=57.883 memavail=716260 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.511
Stats 1214.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28574 bytes_read=81659 bytes_retransmit=9 bytes_invalid=0 send_seq=2237 receive_seq=2237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=43.5 mcu_temp: temp=30.9  sysload=0.39 cputime=57.928 memavail=715816 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.511
Stats 1215.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28627 bytes_read=81874 bytes_retransmit=9 bytes_invalid=0 send_seq=2242 receive_seq=2242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=43.3 mcu_temp: temp=30.9  sysload=0.39 cputime=57.970 memavail=715772 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.511
Stats 1216.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28723 bytes_read=82085 bytes_retransmit=9 bytes_invalid=0 send_seq=2249 receive_seq=2249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=60 temp=60.0 pwm=0.225 raspberry_pi: temp=43.6 mcu_temp: temp=30.8  sysload=0.36 cputime=58.012 memavail=715824 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.519
Stats 1217.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28803 bytes_read=82320 bytes_retransmit=9 bytes_invalid=0 send_seq=2255 receive_seq=2255 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.226 raspberry_pi: temp=43.2 mcu_temp: temp=30.8  sysload=0.36 cputime=58.055 memavail=716024 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.519
Stats 1218.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28883 bytes_read=82540 bytes_retransmit=9 bytes_invalid=0 send_seq=2261 receive_seq=2261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.285 raspberry_pi: temp=43.5 mcu_temp: temp=30.8  sysload=0.36 cputime=58.098 memavail=717648 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.446
Stats 1219.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=28936 bytes_read=82756 bytes_retransmit=9 bytes_invalid=0 send_seq=2266 receive_seq=2266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.285 raspberry_pi: temp=43.2 mcu_temp: temp=30.9  sysload=0.36 cputime=58.140 memavail=716900 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.446
Stats 1220.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29005 bytes_read=82991 bytes_retransmit=9 bytes_invalid=0 send_seq=2272 receive_seq=2272 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.198 raspberry_pi: temp=43.6 mcu_temp: temp=30.9  sysload=0.36 cputime=58.184 memavail=716904 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.446
Stats 1221.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29074 bytes_read=83211 bytes_retransmit=9 bytes_invalid=0 send_seq=2278 receive_seq=2278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.263 raspberry_pi: temp=43.2 mcu_temp: temp=30.8  sysload=0.33 cputime=58.226 memavail=716904 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.446
Stats 1222.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29154 bytes_read=83417 bytes_retransmit=9 bytes_invalid=0 send_seq=2284 receive_seq=2284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=43.3 mcu_temp: temp=30.8  sysload=0.33 cputime=58.267 memavail=716652 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 1223.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29207 bytes_read=83647 bytes_retransmit=9 bytes_invalid=0 send_seq=2289 receive_seq=2289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=43.4 mcu_temp: temp=31.0  sysload=0.33 cputime=58.309 memavail=717488 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 1224.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29260 bytes_read=83877 bytes_retransmit=9 bytes_invalid=0 send_seq=2294 receive_seq=2294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=43.5 mcu_temp: temp=31.0  sysload=0.33 cputime=58.351 memavail=717236 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 1225.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29329 bytes_read=84083 bytes_retransmit=9 bytes_invalid=0 send_seq=2300 receive_seq=2300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.264 raspberry_pi: temp=43.4 mcu_temp: temp=30.9  sysload=0.33 cputime=58.392 memavail=717500 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 1226.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29430 bytes_read=84328 bytes_retransmit=9 bytes_invalid=0 send_seq=2308 receive_seq=2308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.277 raspberry_pi: temp=43.3 mcu_temp: temp=31.0  sysload=0.30 cputime=58.435 memavail=717196 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1227.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29515 bytes_read=84553 bytes_retransmit=9 bytes_invalid=0 send_seq=2315 receive_seq=2315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.270 raspberry_pi: temp=43.4 mcu_temp: temp=31.0  sysload=0.30 cputime=58.477 memavail=717280 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1228.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29579 bytes_read=84754 bytes_retransmit=9 bytes_invalid=0 send_seq=2320 receive_seq=2320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.218 raspberry_pi: temp=43.1 mcu_temp: temp=30.9  sysload=0.30 cputime=58.519 memavail=718160 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1229.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29664 bytes_read=85009 bytes_retransmit=9 bytes_invalid=0 send_seq=2327 receive_seq=2327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=43.5 mcu_temp: temp=31.0  sysload=0.30 cputime=58.562 memavail=717272 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1230.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29760 bytes_read=85234 bytes_retransmit=9 bytes_invalid=0 send_seq=2334 receive_seq=2334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=43.4 mcu_temp: temp=31.0  sysload=0.30 cputime=58.606 memavail=717056 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 1231.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29813 bytes_read=85435 bytes_retransmit=9 bytes_invalid=0 send_seq=2339 receive_seq=2339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=43.3 mcu_temp: temp=31.0  sysload=0.28 cputime=58.647 memavail=717084 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 1232.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29866 bytes_read=85665 bytes_retransmit=9 bytes_invalid=0 send_seq=2344 receive_seq=2344 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=43.6 mcu_temp: temp=31.0  sysload=0.28 cputime=58.689 memavail=717084 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 1233.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=29945 bytes_read=85885 bytes_retransmit=9 bytes_invalid=0 send_seq=2350 receive_seq=2350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.240 raspberry_pi: temp=43.2 mcu_temp: temp=31.1  sysload=0.28 cputime=58.731 memavail=717096 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 1234.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30030 bytes_read=86111 bytes_retransmit=9 bytes_invalid=0 send_seq=2357 receive_seq=2357 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.249 raspberry_pi: temp=43.6 mcu_temp: temp=30.9  sysload=0.28 cputime=58.773 memavail=717192 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.484
Stats 1235.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30099 bytes_read=86360 bytes_retransmit=9 bytes_invalid=0 send_seq=2363 receive_seq=2363 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=60.0 pwm=0.249 raspberry_pi: temp=43.2 mcu_temp: temp=30.9  sysload=0.28 cputime=58.822 memavail=717196 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1236.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30179 bytes_read=86560 bytes_retransmit=9 bytes_invalid=0 send_seq=2369 receive_seq=2369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=60 temp=60.0 pwm=0.254 raspberry_pi: temp=43.8 mcu_temp: temp=31.1  sysload=0.25 cputime=58.863 memavail=717260 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1237.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30254 bytes_read=86771 bytes_retransmit=9 bytes_invalid=0 send_seq=2376 receive_seq=2376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.0 pwm=0.200 raspberry_pi: temp=42.8 mcu_temp: temp=31.1  sysload=0.25 cputime=58.905 memavail=717784 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1238.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30323 bytes_read=87017 bytes_retransmit=9 bytes_invalid=0 send_seq=2382 receive_seq=2382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=43.6 mcu_temp: temp=31.0  sysload=0.25 cputime=58.948 memavail=717456 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1239.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30414 bytes_read=87238 bytes_retransmit=9 bytes_invalid=0 send_seq=2388 receive_seq=2388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=43.2 mcu_temp: temp=31.2  sysload=0.25 cputime=58.991 memavail=717456 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1240.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30467 bytes_read=87439 bytes_retransmit=9 bytes_invalid=0 send_seq=2393 receive_seq=2393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=43.1 mcu_temp: temp=31.1  sysload=0.25 cputime=59.032 memavail=717856 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1241.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30531 bytes_read=87683 bytes_retransmit=9 bytes_invalid=0 send_seq=2398 receive_seq=2398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=60 temp=60.0 pwm=0.268 raspberry_pi: temp=44.0 mcu_temp: temp=31.1  sysload=0.23 cputime=59.075 memavail=717992 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1242.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30611 bytes_read=87889 bytes_retransmit=9 bytes_invalid=0 send_seq=2404 receive_seq=2404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.267 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.23 cputime=59.120 memavail=718220 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1243.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30680 bytes_read=88095 bytes_retransmit=9 bytes_invalid=0 send_seq=2410 receive_seq=2410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=60 temp=60.0 pwm=0.267 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.23 cputime=59.162 memavail=718744 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1244.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30749 bytes_read=88359 bytes_retransmit=9 bytes_invalid=0 send_seq=2416 receive_seq=2416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=43.5 mcu_temp: temp=31.0  sysload=0.23 cputime=59.206 memavail=718424 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1245.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30802 bytes_read=88560 bytes_retransmit=9 bytes_invalid=0 send_seq=2421 receive_seq=2421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=44.0 mcu_temp: temp=31.1  sysload=0.23 cputime=59.249 memavail=717928 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1246.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30903 bytes_read=88776 bytes_retransmit=9 bytes_invalid=0 send_seq=2429 receive_seq=2429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.272 raspberry_pi: temp=44.1 mcu_temp: temp=31.0  sysload=0.22 cputime=59.291 memavail=717928 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1247.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=30988 bytes_read=89030 bytes_retransmit=9 bytes_invalid=0 send_seq=2436 receive_seq=2436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=44.0 mcu_temp: temp=31.0  sysload=0.22 cputime=59.339 memavail=717676 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.476
Stats 1248.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31041 bytes_read=89231 bytes_retransmit=9 bytes_invalid=0 send_seq=2441 receive_seq=2441 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=44.3 mcu_temp: temp=30.8  sysload=0.22 cputime=59.379 memavail=718456 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 1249.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31094 bytes_read=89462 bytes_retransmit=9 bytes_invalid=0 send_seq=2446 receive_seq=2446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=43.8 mcu_temp: temp=31.0  sysload=0.22 cputime=59.421 memavail=718456 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 1250.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31147 bytes_read=89691 bytes_retransmit=9 bytes_invalid=0 send_seq=2451 receive_seq=2451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=44.3 mcu_temp: temp=31.0  sysload=0.22 cputime=59.463 memavail=718992 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 1251.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31259 bytes_read=89907 bytes_retransmit=9 bytes_invalid=0 send_seq=2459 receive_seq=2459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.277 raspberry_pi: temp=43.9 mcu_temp: temp=31.0  sysload=0.28 cputime=59.509 memavail=719128 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.468
Stats 1252.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31328 bytes_read=90128 bytes_retransmit=9 bytes_invalid=0 send_seq=2465 receive_seq=2465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.28 cputime=59.551 memavail=719380 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.468
Stats 1253.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31381 bytes_read=90357 bytes_retransmit=9 bytes_invalid=0 send_seq=2470 receive_seq=2470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.28 cputime=59.593 memavail=719756 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.468
Stats 1254.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31445 bytes_read=90573 bytes_retransmit=9 bytes_invalid=0 send_seq=2475 receive_seq=2475 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.290 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.28 cputime=59.635 memavail=719756 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.468
Stats 1255.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31514 bytes_read=90794 bytes_retransmit=9 bytes_invalid=0 send_seq=2481 receive_seq=2481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.0 mcu_temp: temp=31.2  sysload=0.28 cputime=59.677 memavail=719764 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.468
Stats 1256.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31583 bytes_read=91028 bytes_retransmit=9 bytes_invalid=0 send_seq=2487 receive_seq=2487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.74 cputime=59.720 memavail=719764 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 1257.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31636 bytes_read=91229 bytes_retransmit=9 bytes_invalid=0 send_seq=2492 receive_seq=2492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.74 cputime=59.762 memavail=719764 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 1258.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31689 bytes_read=91445 bytes_retransmit=9 bytes_invalid=0 send_seq=2497 receive_seq=2497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.74 cputime=59.804 memavail=719096 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 1259.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31758 bytes_read=91694 bytes_retransmit=9 bytes_invalid=0 send_seq=2503 receive_seq=2503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=43.5 mcu_temp: temp=31.0  sysload=0.74 cputime=59.847 memavail=719096 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 1260.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31827 bytes_read=91900 bytes_retransmit=9 bytes_invalid=0 send_seq=2509 receive_seq=2509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.74 cputime=59.890 memavail=718852 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1261.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31912 bytes_read=92126 bytes_retransmit=9 bytes_invalid=0 send_seq=2516 receive_seq=2516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=43.5 mcu_temp: temp=31.2  sysload=0.68 cputime=59.933 memavail=718852 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1262.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=31965 bytes_read=92344 bytes_retransmit=9 bytes_invalid=0 send_seq=2521 receive_seq=2521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=43.5 mcu_temp: temp=31.0  sysload=0.68 cputime=59.975 memavail=718852 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.481
Stats 1263.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32034 bytes_read=92543 bytes_retransmit=9 bytes_invalid=0 send_seq=2527 receive_seq=2527 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.297 raspberry_pi: temp=43.3 mcu_temp: temp=31.2  sysload=0.68 cputime=60.018 memavail=718196 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1264.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32119 bytes_read=92784 bytes_retransmit=9 bytes_invalid=0 send_seq=2534 receive_seq=2534 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.203 raspberry_pi: temp=43.3 mcu_temp: temp=31.1  sysload=0.68 cputime=60.061 memavail=718240 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1265.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32172 bytes_read=93013 bytes_retransmit=9 bytes_invalid=0 send_seq=2539 receive_seq=2539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.203 raspberry_pi: temp=43.5 mcu_temp: temp=31.1  sysload=0.68 cputime=60.106 memavail=717784 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1266.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32236 bytes_read=93214 bytes_retransmit=9 bytes_invalid=0 send_seq=2544 receive_seq=2544 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.257 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.62 cputime=60.147 memavail=718040 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1267.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32305 bytes_read=93435 bytes_retransmit=9 bytes_invalid=0 send_seq=2550 receive_seq=2550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.62 cputime=60.190 memavail=717820 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1269.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32390 bytes_read=93674 bytes_retransmit=9 bytes_invalid=0 send_seq=2557 receive_seq=2557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.4 mcu_temp: temp=31.0  sysload=0.62 cputime=60.232 memavail=718192 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.472
Stats 1270.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32443 bytes_read=93890 bytes_retransmit=9 bytes_invalid=0 send_seq=2562 receive_seq=2562 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.3 mcu_temp: temp=31.2  sysload=0.62 cputime=60.274 memavail=717940 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.472
Stats 1271.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32496 bytes_read=94106 bytes_retransmit=9 bytes_invalid=0 send_seq=2567 receive_seq=2567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.7 mcu_temp: temp=31.0  sysload=0.62 cputime=60.316 memavail=717740 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.472
Stats 1272.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32549 bytes_read=94335 bytes_retransmit=9 bytes_invalid=0 send_seq=2572 receive_seq=2572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.73 cputime=60.357 memavail=717740 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.472
Stats 1273.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32645 bytes_read=94546 bytes_retransmit=9 bytes_invalid=0 send_seq=2579 receive_seq=2579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.73 cputime=60.399 memavail=718020 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1274.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32698 bytes_read=94762 bytes_retransmit=9 bytes_invalid=0 send_seq=2584 receive_seq=2584 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=43.5 mcu_temp: temp=31.1  sysload=0.73 cputime=60.441 memavail=717680 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1275.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32751 bytes_read=95006 bytes_retransmit=9 bytes_invalid=0 send_seq=2589 receive_seq=2589 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=43.5 mcu_temp: temp=31.2  sysload=0.73 cputime=60.484 memavail=717680 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1276.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32836 bytes_read=95217 bytes_retransmit=9 bytes_invalid=0 send_seq=2596 receive_seq=2596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.263 raspberry_pi: temp=43.9 mcu_temp: temp=31.0  sysload=0.73 cputime=60.526 memavail=716924 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1277.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=32905 bytes_read=95438 bytes_retransmit=9 bytes_invalid=0 send_seq=2602 receive_seq=2602 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.67 cputime=60.568 memavail=717212 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1278.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33001 bytes_read=95677 bytes_retransmit=9 bytes_invalid=0 send_seq=2609 receive_seq=2609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.0 pwm=0.196 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.67 cputime=60.611 memavail=717464 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1279.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33081 bytes_read=95883 bytes_retransmit=9 bytes_invalid=0 send_seq=2615 receive_seq=2615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=43.2 mcu_temp: temp=31.3  sysload=0.67 cputime=60.652 memavail=717152 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.481
Stats 1280.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33150 bytes_read=96119 bytes_retransmit=9 bytes_invalid=0 send_seq=2621 receive_seq=2621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.283 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.67 cputime=60.695 memavail=717152 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.481
Stats 1281.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33225 bytes_read=96348 bytes_retransmit=9 bytes_invalid=0 send_seq=2626 receive_seq=2626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=43.4 mcu_temp: temp=31.2  sysload=0.67 cputime=60.738 memavail=716656 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.481
Stats 1282.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33321 bytes_read=96559 bytes_retransmit=9 bytes_invalid=0 send_seq=2633 receive_seq=2633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=60 temp=60.0 pwm=0.246 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.62 cputime=60.780 memavail=716912 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 1283.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33390 bytes_read=96780 bytes_retransmit=9 bytes_invalid=0 send_seq=2639 receive_seq=2639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.62 cputime=60.822 memavail=717112 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 1284.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33459 bytes_read=97014 bytes_retransmit=9 bytes_invalid=0 send_seq=2645 receive_seq=2645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=43.4 mcu_temp: temp=31.0  sysload=0.62 cputime=60.865 memavail=718356 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.456
Stats 1285.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33539 bytes_read=97235 bytes_retransmit=9 bytes_invalid=0 send_seq=2651 receive_seq=2651 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.62 cputime=60.906 memavail=718384 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.456
Stats 1286.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33608 bytes_read=97456 bytes_retransmit=9 bytes_invalid=0 send_seq=2657 receive_seq=2657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.0 pwm=0.263 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.62 cputime=60.949 memavail=716872 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.456
Stats 1287.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33661 bytes_read=97685 bytes_retransmit=9 bytes_invalid=0 send_seq=2662 receive_seq=2662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.263 raspberry_pi: temp=43.3 mcu_temp: temp=31.3  sysload=0.57 cputime=60.991 memavail=717128 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.456
Stats 1288.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33714 bytes_read=97883 bytes_retransmit=9 bytes_invalid=0 send_seq=2667 receive_seq=2667 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.263 raspberry_pi: temp=43.4 mcu_temp: temp=31.4  sysload=0.57 cputime=61.031 memavail=716884 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.456
Stats 1289.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=33794 bytes_read=98093 bytes_retransmit=9 bytes_invalid=0 send_seq=2673 receive_seq=2673 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.57 cputime=61.075 memavail=717048 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1290.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=33847 bytes_read=98334 bytes_retransmit=9 bytes_invalid=0 send_seq=2678 receive_seq=2678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.57 cputime=61.118 memavail=717052 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1291.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=33927 bytes_read=98540 bytes_retransmit=9 bytes_invalid=0 send_seq=2684 receive_seq=2684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.233 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.57 cputime=61.160 memavail=716836 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1292.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=33975 bytes_read=98751 bytes_retransmit=9 bytes_invalid=0 send_seq=2688 receive_seq=2688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.0 pwm=0.233 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.52 cputime=61.201 memavail=716840 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1293.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=34044 bytes_read=98985 bytes_retransmit=9 bytes_invalid=0 send_seq=2694 receive_seq=2694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.233 raspberry_pi: temp=43.3 mcu_temp: temp=31.3  sysload=0.52 cputime=61.245 memavail=717348 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1294.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=34097 bytes_read=99186 bytes_retransmit=9 bytes_invalid=0 send_seq=2699 receive_seq=2699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.233 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.52 cputime=61.287 memavail=716216 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1295.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34193 bytes_read=99427 bytes_retransmit=9 bytes_invalid=0 send_seq=2706 receive_seq=2706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.52 cputime=61.330 memavail=716468 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1296.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34246 bytes_read=99656 bytes_retransmit=9 bytes_invalid=0 send_seq=2711 receive_seq=2711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.52 cputime=61.372 memavail=716416 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.469
Stats 1297.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34315 bytes_read=99862 bytes_retransmit=9 bytes_invalid=0 send_seq=2717 receive_seq=2717 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.48 cputime=61.414 memavail=716532 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 1298.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34368 bytes_read=100078 bytes_retransmit=9 bytes_invalid=0 send_seq=2722 receive_seq=2722 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=44.2 mcu_temp: temp=31.3  sysload=0.48 cputime=61.457 memavail=716532 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 1299.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34443 bytes_read=100328 bytes_retransmit=9 bytes_invalid=0 send_seq=2729 receive_seq=2729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.255 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.48 cputime=61.500 memavail=715408 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 1300.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34496 bytes_read=100544 bytes_retransmit=9 bytes_invalid=0 send_seq=2734 receive_seq=2734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.255 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.48 cputime=61.541 memavail=715660 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 1301.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34565 bytes_read=100765 bytes_retransmit=9 bytes_invalid=0 send_seq=2740 receive_seq=2740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=60 temp=60.0 pwm=0.255 raspberry_pi: temp=43.4 mcu_temp: temp=31.2  sysload=0.48 cputime=61.584 memavail=715660 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1302.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34650 bytes_read=101004 bytes_retransmit=9 bytes_invalid=0 send_seq=2747 receive_seq=2747 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=60.0 pwm=0.248 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.60 cputime=61.629 memavail=715668 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1303.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34703 bytes_read=101205 bytes_retransmit=9 bytes_invalid=0 send_seq=2752 receive_seq=2752 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.248 raspberry_pi: temp=43.8 mcu_temp: temp=31.1  sysload=0.60 cputime=61.669 memavail=715952 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1304.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34772 bytes_read=101426 bytes_retransmit=9 bytes_invalid=0 send_seq=2758 receive_seq=2758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.194 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.60 cputime=61.714 memavail=715604 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.478
Stats 1305.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34868 bytes_read=101680 bytes_retransmit=9 bytes_invalid=0 send_seq=2765 receive_seq=2765 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=60.0 pwm=0.244 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.60 cputime=61.758 memavail=715604 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1306.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=34937 bytes_read=101886 bytes_retransmit=9 bytes_invalid=0 send_seq=2771 receive_seq=2771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=60 temp=60.0 pwm=0.295 raspberry_pi: temp=44.0 mcu_temp: temp=31.1  sysload=0.60 cputime=61.801 memavail=715608 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1307.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35006 bytes_read=102107 bytes_retransmit=9 bytes_invalid=0 send_seq=2777 receive_seq=2777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.56 cputime=61.845 memavail=715364 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1308.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35091 bytes_read=102346 bytes_retransmit=9 bytes_invalid=0 send_seq=2784 receive_seq=2784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.195 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.56 cputime=61.888 memavail=715364 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1309.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35160 bytes_read=102552 bytes_retransmit=9 bytes_invalid=0 send_seq=2790 receive_seq=2790 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 heater_bed: target=60 temp=60.0 pwm=0.264 raspberry_pi: temp=43.2 mcu_temp: temp=31.2  sysload=0.56 cputime=61.929 memavail=714264 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.507
Stats 1310.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35240 bytes_read=102802 bytes_retransmit=9 bytes_invalid=0 send_seq=2796 receive_seq=2796 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996952 heater_bed: target=60 temp=60.0 pwm=0.206 raspberry_pi: temp=43.5 mcu_temp: temp=31.3  sysload=0.56 cputime=61.974 memavail=714012 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.504
Stats 1311.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35325 bytes_read=103027 bytes_retransmit=9 bytes_invalid=0 send_seq=2803 receive_seq=2803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=60.0 pwm=0.256 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.56 cputime=62.017 memavail=714264 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.453
Stats 1312.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35389 bytes_read=103228 bytes_retransmit=9 bytes_invalid=0 send_seq=2808 receive_seq=2808 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.190 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.51 cputime=62.062 memavail=714524 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.453
Stats 1313.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35458 bytes_read=103463 bytes_retransmit=9 bytes_invalid=0 send_seq=2814 receive_seq=2814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.259 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.51 cputime=62.104 memavail=714524 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.453
Stats 1314.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35511 bytes_read=103668 bytes_retransmit=9 bytes_invalid=0 send_seq=2819 receive_seq=2819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.259 raspberry_pi: temp=43.9 mcu_temp: temp=31.4  sysload=0.51 cputime=62.146 memavail=713868 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.453
Stats 1315.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35591 bytes_read=103882 bytes_retransmit=9 bytes_invalid=0 send_seq=2825 receive_seq=2825 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.51 cputime=62.189 memavail=714148 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.456
Stats 1316.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35644 bytes_read=104112 bytes_retransmit=9 bytes_invalid=0 send_seq=2830 receive_seq=2830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.51 cputime=62.231 memavail=714148 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.456
Stats 1317.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35697 bytes_read=104327 bytes_retransmit=9 bytes_invalid=0 send_seq=2835 receive_seq=2835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=43.5 mcu_temp: temp=31.3  sysload=0.47 cputime=62.272 memavail=714540 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.456
Stats 1318.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35766 bytes_read=104533 bytes_retransmit=9 bytes_invalid=0 send_seq=2841 receive_seq=2841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=60.0 pwm=0.285 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.47 cputime=62.313 memavail=714540 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.456
Stats 1319.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=35851 bytes_read=104773 bytes_retransmit=9 bytes_invalid=0 send_seq=2848 receive_seq=2848 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=60 temp=60.0 pwm=0.232 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.47 cputime=62.357 memavail=714792 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1320.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=35899 bytes_read=104998 bytes_retransmit=9 bytes_invalid=0 send_seq=2852 receive_seq=2852 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=60.0 pwm=0.232 raspberry_pi: temp=43.5 mcu_temp: temp=31.1  sysload=0.47 cputime=62.401 memavail=714792 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1321.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=35963 bytes_read=105199 bytes_retransmit=9 bytes_invalid=0 send_seq=2857 receive_seq=2857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.0 pwm=0.284 raspberry_pi: temp=43.4 mcu_temp: temp=31.5  sysload=0.47 cputime=62.445 memavail=714820 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1322.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=36027 bytes_read=105429 bytes_retransmit=9 bytes_invalid=0 send_seq=2862 receive_seq=2862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996979 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=43.7 mcu_temp: temp=31.3  sysload=0.43 cputime=62.489 memavail=714080 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.473
Stats 1323.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=36091 bytes_read=105644 bytes_retransmit=9 bytes_invalid=0 send_seq=2867 receive_seq=2867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996974 heater_bed: target=60 temp=60.0 pwm=0.227 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.43 cputime=62.532 memavail=714344 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1324.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=36155 bytes_read=105845 bytes_retransmit=9 bytes_invalid=0 send_seq=2872 receive_seq=2872 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996971 heater_bed: target=60 temp=60.0 pwm=0.283 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.43 cputime=62.575 memavail=714628 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1325.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36219 bytes_read=106090 bytes_retransmit=9 bytes_invalid=0 send_seq=2877 receive_seq=2877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=60 temp=60.0 pwm=0.221 raspberry_pi: temp=44.5 mcu_temp: temp=31.4  sysload=0.43 cputime=62.618 memavail=714628 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 1326.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36267 bytes_read=106300 bytes_retransmit=9 bytes_invalid=0 send_seq=2881 receive_seq=2881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=60.0 pwm=0.221 raspberry_pi: temp=44.3 mcu_temp: temp=31.2  sysload=0.43 cputime=62.660 memavail=715132 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 1327.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36331 bytes_read=106501 bytes_retransmit=9 bytes_invalid=0 send_seq=2886 receive_seq=2886 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996978 heater_bed: target=60 temp=60.0 pwm=0.221 raspberry_pi: temp=44.8 mcu_temp: temp=31.5  sysload=0.40 cputime=62.703 memavail=715188 print_time=270.732 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.499
Stats 1328.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=36413 bytes_read=106736 bytes_retransmit=9 bytes_invalid=0 send_seq=2892 receive_seq=2892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996987 heater_bed: target=0 temp=60.0 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.3  sysload=0.40 cputime=62.751 memavail=715188 print_time=500.747 buffer_time=0.824 print_stall=0 extruder: target=0 temp=199.8 pwm=0.499
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473053958208: Disconnected
Restarting printer
Start printer at Fri May 19 01:29:55 2023 (1684459795.4 1330.0)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 30.164472
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473035586768: New connection
webhooks client 281473035586768: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 1333.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=4726 bytes_read=6072 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=257 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=542 upcoming_bytes=15 freq=168078621 heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=46.0 mcu_temp: temp=0.0  sysload=0.45 cputime=65.761 memavail=714896 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473035586768
webhooks: registering remote method 'reboot_machine' for connection id: 281473035586768
webhooks: registering remote method 'pause_job_queue' for connection id: 281473035586768
webhooks: registering remote method 'start_job_queue' for connection id: 281473035586768
Stats 1334.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5352 bytes_read=6321 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=168013165 heater_bed: target=0 temp=59.6 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.4  sysload=0.45 cputime=65.817 memavail=715544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.7 pwm=0.000
Stats 1335.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5405 bytes_read=6481 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167999764 heater_bed: target=0 temp=59.5 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.2  sysload=0.45 cputime=65.866 memavail=715580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.0 pwm=0.000
Stats 1336.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5430 bytes_read=6651 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=59.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.41 cputime=65.898 memavail=715076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.2 pwm=0.000
Stats 1337.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5466 bytes_read=6834 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995470 heater_bed: target=0 temp=59.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.41 cputime=65.932 memavail=715080 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.1 pwm=0.000
Stats 1338.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5491 bytes_read=6989 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995559 heater_bed: target=0 temp=59.3 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.41 cputime=65.963 memavail=715116 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.2 pwm=0.000
Heater extruder approaching new target of 200.000
Stats 1339.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=5723 bytes_read=7194 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995749 heater_bed: target=60 temp=59.2 pwm=0.434 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.41 cputime=66.006 memavail=716316 print_time=10.122 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.3 pwm=1.000
Stats 1340.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=5797 bytes_read=7382 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995817 heater_bed: target=60 temp=59.2 pwm=0.329 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.41 cputime=66.040 memavail=716384 print_time=10.122 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.1 pwm=1.000
Stats 1341.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=5838 bytes_read=7542 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995950 heater_bed: target=60 temp=59.2 pwm=0.221 raspberry_pi: temp=43.4 mcu_temp: temp=31.2  sysload=0.38 cputime=66.073 memavail=715628 print_time=10.122 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.4 pwm=1.000
Stats 1342.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=5882 bytes_read=7722 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996023 heater_bed: target=60 temp=59.2 pwm=0.221 raspberry_pi: temp=43.5 mcu_temp: temp=31.4  sysload=0.38 cputime=66.108 memavail=715136 print_time=10.122 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.9 pwm=1.000
Stats 1343.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000023 bytes_write=6054 bytes_read=7930 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996102 heater_bed: target=0 temp=59.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.2  sysload=0.38 cputime=66.147 memavail=714888 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.5 pwm=1.000
Stats 1344.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000029 mcu_task_stddev=0.000121 bytes_write=6094 bytes_read=8101 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996207 heater_bed: target=0 temp=59.2 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.38 cputime=66.179 memavail=716480 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.6 pwm=1.000
Stats 1345.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000029 mcu_task_stddev=0.000121 bytes_write=6100 bytes_read=8261 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996388 heater_bed: target=0 temp=59.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.38 cputime=66.209 memavail=716228 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.8 pwm=1.000
Stats 1346.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000029 mcu_task_stddev=0.000121 bytes_write=6122 bytes_read=8439 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996432 heater_bed: target=0 temp=59.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.1  sysload=0.43 cputime=66.242 memavail=716500 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.4 pwm=0.912
Stats 1347.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000029 mcu_task_stddev=0.000121 bytes_write=6160 bytes_read=8594 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996519 heater_bed: target=0 temp=59.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.43 cputime=66.274 memavail=716260 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.1 pwm=0.785
Stats 1348.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000029 mcu_task_stddev=0.000121 bytes_write=6201 bytes_read=8769 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996520 heater_bed: target=0 temp=58.9 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.4  sysload=0.43 cputime=66.307 memavail=716212 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.8 pwm=0.690
Stats 1349.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6258 bytes_read=8976 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996533 heater_bed: target=0 temp=58.8 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.3  sysload=0.43 cputime=66.340 memavail=716792 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.9 pwm=0.566
Stats 1350.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6299 bytes_read=9136 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996534 heater_bed: target=0 temp=58.7 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.43 cputime=66.371 memavail=716544 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.7 pwm=0.493
Stats 1351.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6340 bytes_read=9311 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996626 heater_bed: target=0 temp=58.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.39 cputime=66.403 memavail=716292 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.5 pwm=0.435
Heater extruder within range of 200.000
Stats 1352.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6346 bytes_read=9484 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996638 heater_bed: target=0 temp=58.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.39 cputime=66.436 memavail=715800 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.3 pwm=0.435
Stats 1353.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6371 bytes_read=9639 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996633 heater_bed: target=0 temp=58.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.39 cputime=66.468 memavail=715800 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.9 pwm=0.435
Stats 1354.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=6396 bytes_read=9817 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=0 temp=58.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.39 cputime=66.500 memavail=714888 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.3 pwm=0.435
Stats 1355.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=6421 bytes_read=9990 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996640 heater_bed: target=0 temp=58.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.39 cputime=66.532 memavail=714636 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.8 pwm=0.481
Stats 1356.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=6462 bytes_read=10150 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996643 heater_bed: target=0 temp=58.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.0  sysload=0.36 cputime=66.563 memavail=714636 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.0 pwm=0.481
Stats 1357.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=6484 bytes_read=10315 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996649 heater_bed: target=0 temp=58.2 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.36 cputime=66.594 memavail=714388 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.2 pwm=0.534
Stats 1358.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=6575 bytes_read=10503 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996661 heater_bed: target=0 temp=58.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.36 cputime=66.627 memavail=714392 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.4 pwm=0.534
Stats 1359.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000065 bytes_write=6581 bytes_read=10663 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996674 heater_bed: target=0 temp=58.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.3  sysload=0.36 cputime=66.658 memavail=713720 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.6 pwm=0.534
Stats 1360.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000065 bytes_write=6607 bytes_read=10833 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996683 heater_bed: target=0 temp=58.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.36 cputime=66.690 memavail=713724 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.7 pwm=0.534
Stats 1361.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000065 bytes_write=6613 bytes_read=11006 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996709 heater_bed: target=0 temp=57.9 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.33 cputime=66.722 memavail=713724 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.9 pwm=0.529
Stats 1362.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000065 bytes_write=6635 bytes_read=11156 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996746 heater_bed: target=0 temp=57.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.1  sysload=0.33 cputime=66.753 memavail=714188 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.529
Stats 1363.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000065 bytes_write=6641 bytes_read=11316 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996754 heater_bed: target=0 temp=57.8 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.33 cputime=66.785 memavail=714264 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.529
Stats 1364.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6647 bytes_read=11503 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996756 heater_bed: target=0 temp=57.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.1  sysload=0.33 cputime=66.817 memavail=713800 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.529
Stats 1365.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6653 bytes_read=11648 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996765 heater_bed: target=0 temp=57.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.33 cputime=66.847 memavail=713800 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.529
Stats 1366.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6691 bytes_read=11818 bytes_retransmit=9 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996768 heater_bed: target=0 temp=57.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.30 cputime=66.879 memavail=713800 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.465
Stats 1367.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6697 bytes_read=11991 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996771 heater_bed: target=0 temp=57.5 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.1  sysload=0.30 cputime=66.911 memavail=714000 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.465
Stats 1368.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6703 bytes_read=12136 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996776 heater_bed: target=0 temp=57.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.30 cputime=66.943 memavail=714100 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 1369.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6734 bytes_read=12337 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996785 heater_bed: target=0 temp=57.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.30 cputime=66.976 memavail=713848 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 1370.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6756 bytes_read=12515 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996783 heater_bed: target=0 temp=57.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.30 cputime=67.008 memavail=714100 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.436
Stats 1371.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6762 bytes_read=12660 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996785 heater_bed: target=0 temp=57.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.1  sysload=0.28 cputime=67.040 memavail=713848 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.436
Stats 1372.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6768 bytes_read=12820 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996789 heater_bed: target=0 temp=57.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.1  sysload=0.28 cputime=67.072 memavail=713604 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.436
Stats 1373.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6774 bytes_read=12993 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996802 heater_bed: target=0 temp=57.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.28 cputime=67.103 memavail=713604 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.436
Stats 1374.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6796 bytes_read=13157 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996808 heater_bed: target=0 temp=57.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.3  sysload=0.28 cputime=67.135 memavail=713744 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.465
Stats 1375.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6802 bytes_read=13317 bytes_retransmit=9 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996807 heater_bed: target=0 temp=57.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.28 cputime=67.166 memavail=713744 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.465
Stats 1376.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6808 bytes_read=13490 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996807 heater_bed: target=0 temp=56.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.1  sysload=0.26 cputime=67.198 memavail=713744 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.465
Stats 1377.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6814 bytes_read=13635 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996807 heater_bed: target=0 temp=56.9 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.1  sysload=0.26 cputime=67.229 memavail=713744 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.465
Stats 1378.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6836 bytes_read=13800 bytes_retransmit=9 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=56.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.26 cputime=67.261 memavail=713752 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.481
Stats 1379.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6842 bytes_read=13984 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=56.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.26 cputime=67.292 memavail=713512 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.481
Stats 1380.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6848 bytes_read=14119 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=56.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.26 cputime=67.323 memavail=713512 print_time=13.831 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.481
Stats 1381.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7416 bytes_read=14633 bytes_retransmit=9 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996837 heater_bed: target=0 temp=56.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.24 cputime=67.404 memavail=713512 print_time=62.325 buffer_time=9.737 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1382.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7450 bytes_read=14852 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=56.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.24 cputime=67.444 memavail=713516 print_time=62.325 buffer_time=8.737 print_stall=0 extruder: target=200 temp=200.0 pwm=0.508
Stats 1383.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7500 bytes_read=15048 bytes_retransmit=9 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=56.5 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.24 cputime=67.480 memavail=713276 print_time=62.325 buffer_time=7.736 print_stall=0 extruder: target=200 temp=200.0 pwm=0.508
Stats 1384.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7534 bytes_read=15269 bytes_retransmit=9 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=56.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.24 cputime=67.519 memavail=713172 print_time=62.325 buffer_time=6.735 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 1385.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7587 bytes_read=15498 bytes_retransmit=9 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=56.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.24 cputime=67.557 memavail=713496 print_time=62.325 buffer_time=5.735 print_stall=0 extruder: target=200 temp=199.9 pwm=0.508
Stats 1386.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7621 bytes_read=15689 bytes_retransmit=9 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=56.3 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.1  sysload=0.46 cputime=67.594 memavail=714008 print_time=62.325 buffer_time=4.735 print_stall=0 extruder: target=200 temp=199.8 pwm=0.508
Stats 1387.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7671 bytes_read=15900 bytes_retransmit=9 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996859 heater_bed: target=0 temp=56.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.46 cputime=67.631 memavail=714476 print_time=62.325 buffer_time=3.734 print_stall=0 extruder: target=200 temp=199.7 pwm=0.565
Stats 1388.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7716 bytes_read=16119 bytes_retransmit=9 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996867 heater_bed: target=0 temp=56.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.46 cputime=67.669 memavail=714792 print_time=62.325 buffer_time=2.733 print_stall=0 extruder: target=200 temp=199.5 pwm=0.619
Stats 1389.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=7766 bytes_read=16330 bytes_retransmit=9 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=0 temp=56.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.46 cputime=67.709 memavail=714392 print_time=62.325 buffer_time=1.733 print_stall=0 extruder: target=200 temp=199.3 pwm=0.670
Stats 1390.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=7821 bytes_read=16546 bytes_retransmit=9 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=56.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.46 cputime=67.747 memavail=714392 print_time=62.325 buffer_time=0.732 print_stall=0 extruder: target=200 temp=199.2 pwm=0.670
Stats 1391.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=7855 bytes_read=16765 bytes_retransmit=9 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996867 heater_bed: target=0 temp=56.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.42 cputime=67.785 memavail=713892 print_time=62.325 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.670
Stats 1392.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=7938 bytes_read=16971 bytes_retransmit=9 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=56.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.42 cputime=67.824 memavail=713840 print_time=62.325 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.607
Stats 1393.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=7972 bytes_read=17177 bytes_retransmit=9 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996863 heater_bed: target=0 temp=55.9 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.42 cputime=67.867 memavail=714148 print_time=62.325 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.607
Stats 1394.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=8274 bytes_read=17441 bytes_retransmit=9 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=55.8 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.42 cputime=67.912 memavail=715972 print_time=75.119 buffer_time=9.524 print_stall=0 extruder: target=200 temp=199.3 pwm=0.607
Stats 1395.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=8324 bytes_read=17637 bytes_retransmit=9 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996965 heater_bed: target=0 temp=55.8 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.2  sysload=0.42 cputime=67.949 memavail=715216 print_time=75.119 buffer_time=8.524 print_stall=0 extruder: target=200 temp=199.5 pwm=0.534
Stats 1396.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=8395 bytes_read=17858 bytes_retransmit=9 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 heater_bed: target=0 temp=55.7 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.4  sysload=0.39 cputime=67.988 memavail=715472 print_time=75.119 buffer_time=7.524 print_stall=0 extruder: target=200 temp=199.7 pwm=0.467
Stats 1397.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=8429 bytes_read=18077 bytes_retransmit=9 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=0 temp=55.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.1  sysload=0.39 cputime=68.026 memavail=715676 print_time=75.119 buffer_time=6.523 print_stall=0 extruder: target=200 temp=199.9 pwm=0.467
Stats 1398.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000032 bytes_write=8463 bytes_read=18268 bytes_retransmit=9 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=55.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.39 cputime=68.068 memavail=715572 print_time=75.119 buffer_time=5.522 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 1399.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=8497 bytes_read=18489 bytes_retransmit=9 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=0 temp=55.6 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.2  sysload=0.39 cputime=68.106 memavail=715348 print_time=75.119 buffer_time=4.521 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 1400.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=8547 bytes_read=18713 bytes_retransmit=9 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=0 temp=55.5 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.4  sysload=0.39 cputime=68.145 memavail=715684 print_time=75.119 buffer_time=3.520 print_stall=0 extruder: target=200 temp=200.1 pwm=0.500
Stats 1401.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=8581 bytes_read=18904 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=55.5 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.4  sysload=0.36 cputime=68.182 memavail=715636 print_time=75.119 buffer_time=2.519 print_stall=0 extruder: target=200 temp=200.1 pwm=0.500
Stats 1402.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=8650 bytes_read=19125 bytes_retransmit=9 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=55.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.36 cputime=68.221 memavail=715940 print_time=75.119 buffer_time=1.518 print_stall=0 extruder: target=200 temp=199.9 pwm=0.567
Stats 1403.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=8684 bytes_read=19344 bytes_retransmit=9 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=55.3 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.36 cputime=68.259 memavail=715696 print_time=75.119 buffer_time=0.518 print_stall=0 extruder: target=200 temp=199.8 pwm=0.567
Stats 1404.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=8718 bytes_read=19550 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=55.3 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.3  sysload=0.36 cputime=68.296 memavail=716312 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.567
Stats 1405.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=8801 bytes_read=19765 bytes_retransmit=9 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=55.2 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.1  sysload=0.36 cputime=68.335 memavail=716136 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.620
Stats 1406.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=8851 bytes_read=19977 bytes_retransmit=9 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=55.2 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.33 cputime=68.372 memavail=716356 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.561
Stats 1407.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=8885 bytes_read=20168 bytes_retransmit=9 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=55.1 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.33 cputime=68.413 memavail=716140 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.561
Stats 1408.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=8919 bytes_read=20374 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=55.0 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.33 cputime=68.450 memavail=715836 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.561
Stats 1409.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=8969 bytes_read=20613 bytes_retransmit=9 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=55.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.1  sysload=0.33 cputime=68.488 memavail=716024 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.501
Stats 1410.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9003 bytes_read=20804 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=55.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.33 cputime=68.525 memavail=715800 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.501
Stats 1411.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9053 bytes_read=21015 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=54.9 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.2  sysload=0.38 cputime=68.565 memavail=716216 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.439
Stats 1412.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9087 bytes_read=21234 bytes_retransmit=9 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=54.8 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.38 cputime=68.603 memavail=716308 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.439
Stats 1413.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9132 bytes_read=21425 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=54.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.38 cputime=68.642 memavail=715804 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.376
Stats 1414.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9185 bytes_read=21670 bytes_retransmit=9 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=54.7 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.38 cputime=68.681 memavail=716596 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.376
Stats 1415.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9235 bytes_read=21880 bytes_retransmit=9 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=54.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.1  sysload=0.38 cputime=68.720 memavail=716348 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.426
Stats 1416.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9269 bytes_read=22071 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=54.6 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.1  sysload=0.35 cputime=68.757 memavail=716348 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.426
Stats 1417.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9303 bytes_read=22291 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=54.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.35 cputime=68.792 memavail=716096 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.426
Stats 1418.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9353 bytes_read=22501 bytes_retransmit=9 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=54.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.35 cputime=68.830 memavail=715852 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.492
Stats 1419.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9387 bytes_read=22706 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=54.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.35 cputime=68.866 memavail=715404 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.492
Stats 1420.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9454 bytes_read=22941 bytes_retransmit=9 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=0 temp=54.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.35 cputime=68.905 memavail=715756 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.492
Stats 1421.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9488 bytes_read=23146 bytes_retransmit=9 bytes_invalid=0 send_seq=583 receive_seq=583 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=0 temp=54.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.3  sysload=0.32 cputime=68.942 memavail=715536 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.492
Stats 1422.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9522 bytes_read=23337 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=0 temp=54.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.32 cputime=68.978 memavail=715284 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.492
Stats 1423.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9572 bytes_read=23562 bytes_retransmit=9 bytes_invalid=0 send_seq=590 receive_seq=590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=54.3 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.32 cputime=69.017 memavail=715300 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.529
Stats 1424.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9606 bytes_read=23767 bytes_retransmit=9 bytes_invalid=0 send_seq=593 receive_seq=593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=54.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.4  sysload=0.32 cputime=69.054 memavail=716592 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.529
Stats 1425.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9640 bytes_read=23973 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=0 temp=54.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.2  sysload=0.32 cputime=69.091 memavail=716340 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.529
Stats 1426.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9690 bytes_read=24198 bytes_retransmit=9 bytes_invalid=0 send_seq=600 receive_seq=600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=54.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.30 cputime=69.129 memavail=716340 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.475
Stats 1427.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9724 bytes_read=24403 bytes_retransmit=9 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=54.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.30 cputime=69.167 memavail=716088 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.475
Stats 1428.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9758 bytes_read=24594 bytes_retransmit=9 bytes_invalid=0 send_seq=606 receive_seq=606 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=54.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.30 cputime=69.203 memavail=715836 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.475
Stats 1429.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9808 bytes_read=24819 bytes_retransmit=9 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=53.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.30 cputime=69.244 memavail=715844 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.419
Stats 1430.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9864 bytes_read=25059 bytes_retransmit=9 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=53.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.30 cputime=69.283 memavail=715844 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.470
Stats 1431.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9898 bytes_read=25240 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=53.9 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.3  sysload=0.27 cputime=69.320 memavail=715848 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.470
Stats 1432.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9932 bytes_read=25454 bytes_retransmit=9 bytes_invalid=0 send_seq=621 receive_seq=621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=0 temp=53.8 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.6  sysload=0.27 cputime=69.357 memavail=715848 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.470
Stats 1433.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9966 bytes_read=25659 bytes_retransmit=9 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=53.8 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.27 cputime=69.395 memavail=714840 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.470
Stats 1434.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10016 bytes_read=25855 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=53.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.27 cputime=69.432 memavail=714160 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.457
Stats 1435.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10050 bytes_read=26089 bytes_retransmit=9 bytes_invalid=0 send_seq=631 receive_seq=631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=53.6 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.6  sysload=0.27 cputime=69.470 memavail=714160 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.457
Stats 1436.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10084 bytes_read=26294 bytes_retransmit=9 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=53.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.25 cputime=69.507 memavail=714160 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.457
Stats 1437.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10118 bytes_read=26485 bytes_retransmit=9 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=0 temp=53.5 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.4  sysload=0.25 cputime=69.543 memavail=713908 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.457
Stats 1438.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10168 bytes_read=26710 bytes_retransmit=9 bytes_invalid=0 send_seq=641 receive_seq=641 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=53.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.25 cputime=69.583 memavail=713856 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.479
Stats 1439.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10216 bytes_read=26920 bytes_retransmit=9 bytes_invalid=0 send_seq=645 receive_seq=645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=53.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.4  sysload=0.25 cputime=69.621 memavail=713792 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1440.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=10250 bytes_read=27126 bytes_retransmit=9 bytes_invalid=0 send_seq=648 receive_seq=648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=53.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.25 cputime=69.657 memavail=713744 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1441.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=10284 bytes_read=27346 bytes_retransmit=9 bytes_invalid=0 send_seq=651 receive_seq=651 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=53.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.23 cputime=69.696 memavail=713296 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1442.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=10334 bytes_read=27556 bytes_retransmit=9 bytes_invalid=0 send_seq=655 receive_seq=655 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=0 temp=53.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.23 cputime=69.735 memavail=713296 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.499
Stats 1443.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=10368 bytes_read=27747 bytes_retransmit=9 bytes_invalid=0 send_seq=658 receive_seq=658 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=0 temp=53.2 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.23 cputime=69.772 memavail=713548 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.499
Stats 1444.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=10402 bytes_read=27967 bytes_retransmit=9 bytes_invalid=0 send_seq=661 receive_seq=661 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=53.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.23 cputime=69.812 memavail=712420 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.499
Stats 1445.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10436 bytes_read=28186 bytes_retransmit=9 bytes_invalid=0 send_seq=664 receive_seq=664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=53.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.23 cputime=69.851 memavail=713152 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.499
Stats 1446.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10486 bytes_read=28382 bytes_retransmit=9 bytes_invalid=0 send_seq=668 receive_seq=668 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=0 temp=53.1 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.21 cputime=69.891 memavail=712924 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.498
Stats 1447.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10520 bytes_read=28602 bytes_retransmit=9 bytes_invalid=0 send_seq=671 receive_seq=671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=53.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.21 cputime=69.933 memavail=712876 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.498
Stats 1448.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10570 bytes_read=28812 bytes_retransmit=9 bytes_invalid=0 send_seq=675 receive_seq=675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=0 temp=53.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.21 cputime=69.976 memavail=712928 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.447
Stats 1449.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10604 bytes_read=29003 bytes_retransmit=9 bytes_invalid=0 send_seq=678 receive_seq=678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=52.9 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.4  sysload=0.21 cputime=70.019 memavail=712056 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.447
Stats 1450.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10638 bytes_read=29237 bytes_retransmit=9 bytes_invalid=0 send_seq=681 receive_seq=681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=52.9 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.21 cputime=70.061 memavail=711804 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 1451.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10672 bytes_read=29442 bytes_retransmit=9 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=52.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.19 cputime=70.104 memavail=711804 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 1452.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10722 bytes_read=29638 bytes_retransmit=9 bytes_invalid=0 send_seq=688 receive_seq=688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=52.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.19 cputime=70.147 memavail=711300 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.451
Stats 1453.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10756 bytes_read=29858 bytes_retransmit=9 bytes_invalid=0 send_seq=691 receive_seq=691 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=52.7 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.19 cputime=70.189 memavail=711300 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.451
Stats 1454.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10790 bytes_read=30063 bytes_retransmit=9 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=52.7 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.19 cputime=70.236 memavail=712464 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.451
Stats 1455.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10824 bytes_read=30268 bytes_retransmit=9 bytes_invalid=0 send_seq=697 receive_seq=697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=52.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.19 cputime=70.277 memavail=712476 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.451
Stats 1456.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10858 bytes_read=30483 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=0 temp=52.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.18 cputime=70.320 memavail=711936 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.451
Stats 1457.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10908 bytes_read=30682 bytes_retransmit=9 bytes_invalid=0 send_seq=704 receive_seq=704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=0 temp=52.6 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.18 cputime=70.362 memavail=712004 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1458.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10942 bytes_read=30873 bytes_retransmit=9 bytes_invalid=0 send_seq=707 receive_seq=707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=52.5 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.18 cputime=70.403 memavail=711940 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1459.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10976 bytes_read=31093 bytes_retransmit=9 bytes_invalid=0 send_seq=710 receive_seq=710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=52.4 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.4  sysload=0.18 cputime=70.446 memavail=712172 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1460.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=11029 bytes_read=31323 bytes_retransmit=9 bytes_invalid=0 send_seq=715 receive_seq=715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=52.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.18 cputime=70.488 memavail=711704 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.478
Stats 1461.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=11079 bytes_read=31519 bytes_retransmit=9 bytes_invalid=0 send_seq=719 receive_seq=719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=52.4 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.6  sysload=0.16 cputime=70.531 memavail=711960 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.489
Stats 1462.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=11129 bytes_read=31744 bytes_retransmit=9 bytes_invalid=0 send_seq=723 receive_seq=723 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=52.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.16 cputime=70.574 memavail=711708 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.540
Stats 1463.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=11163 bytes_read=31949 bytes_retransmit=9 bytes_invalid=0 send_seq=726 receive_seq=726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=52.3 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.16 cputime=70.616 memavail=711704 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.540
Stats 1464.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=11197 bytes_read=32140 bytes_retransmit=9 bytes_invalid=0 send_seq=729 receive_seq=729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=52.2 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.5  sysload=0.16 cputime=70.658 memavail=710676 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.540
Stats 1465.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11242 bytes_read=32374 bytes_retransmit=9 bytes_invalid=0 send_seq=732 receive_seq=732 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=52.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.16 cputime=70.701 memavail=711168 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.490
Stats 1466.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11276 bytes_read=32579 bytes_retransmit=9 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=52.1 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.15 cputime=70.743 memavail=711184 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.490
Stats 1467.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11310 bytes_read=32770 bytes_retransmit=9 bytes_invalid=0 send_seq=738 receive_seq=738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=52.1 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.15 cputime=70.784 memavail=711184 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.490
Stats 1468.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11344 bytes_read=32990 bytes_retransmit=9 bytes_invalid=0 send_seq=741 receive_seq=741 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=52.0 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.5  sysload=0.15 cputime=70.826 memavail=711184 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.490
Stats 1469.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11389 bytes_read=33195 bytes_retransmit=9 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=52.0 pwm=0.000 raspberry_pi: temp=45.0 mcu_temp: temp=31.5  sysload=0.15 cputime=70.870 memavail=711320 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.460
Stats 1470.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11423 bytes_read=33400 bytes_retransmit=9 bytes_invalid=0 send_seq=747 receive_seq=747 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=51.9 pwm=0.000 raspberry_pi: temp=45.1 mcu_temp: temp=31.7  sysload=0.15 cputime=70.912 memavail=711388 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 1471.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11457 bytes_read=33634 bytes_retransmit=9 bytes_invalid=0 send_seq=750 receive_seq=750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=51.9 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.14 cputime=70.954 memavail=711336 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 1472.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11491 bytes_read=33825 bytes_retransmit=9 bytes_invalid=0 send_seq=753 receive_seq=753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=51.8 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.14 cputime=70.996 memavail=711136 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.460
Stats 1473.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11541 bytes_read=34021 bytes_retransmit=9 bytes_invalid=0 send_seq=757 receive_seq=757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=51.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.14 cputime=71.037 memavail=711140 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.454
Stats 1474.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11575 bytes_read=34255 bytes_retransmit=9 bytes_invalid=0 send_seq=760 receive_seq=760 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=51.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.14 cputime=71.081 memavail=710752 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.454
Stats 1475.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11609 bytes_read=34460 bytes_retransmit=9 bytes_invalid=0 send_seq=763 receive_seq=763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=51.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.6  sysload=0.14 cputime=71.122 memavail=710760 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.454
Stats 1476.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11643 bytes_read=34651 bytes_retransmit=9 bytes_invalid=0 send_seq=766 receive_seq=766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=51.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.13 cputime=71.164 memavail=711116 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.454
Stats 1477.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11677 bytes_read=34885 bytes_retransmit=9 bytes_invalid=0 send_seq=769 receive_seq=769 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=51.6 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.13 cputime=71.207 memavail=710916 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.430
Stats 1478.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11727 bytes_read=35081 bytes_retransmit=9 bytes_invalid=0 send_seq=773 receive_seq=773 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=51.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.13 cputime=71.249 memavail=711140 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.430
Stats 1479.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11761 bytes_read=35272 bytes_retransmit=9 bytes_invalid=0 send_seq=776 receive_seq=776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=51.5 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.13 cputime=71.292 memavail=711060 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.430
Stats 1480.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11809 bytes_read=35525 bytes_retransmit=9 bytes_invalid=0 send_seq=780 receive_seq=780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=51.5 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.7  sysload=0.13 cputime=71.337 memavail=711272 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.430
Stats 1481.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11859 bytes_read=35721 bytes_retransmit=9 bytes_invalid=0 send_seq=784 receive_seq=784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=51.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.12 cputime=71.379 memavail=711324 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.486
Stats 1482.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11893 bytes_read=35902 bytes_retransmit=9 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=51.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.12 cputime=71.421 memavail=711048 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Stats 1483.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11927 bytes_read=36128 bytes_retransmit=9 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=51.3 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.12 cputime=71.464 memavail=711048 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.486
Stats 1484.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=11961 bytes_read=36319 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=51.3 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.12 cputime=71.505 memavail=711012 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.486
Stats 1485.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12011 bytes_read=36545 bytes_retransmit=9 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=51.2 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.12 cputime=71.548 memavail=710960 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.460
Stats 1486.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12045 bytes_read=36764 bytes_retransmit=9 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=51.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.11 cputime=71.590 memavail=710960 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.460
Stats 1487.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12079 bytes_read=36955 bytes_retransmit=9 bytes_invalid=0 send_seq=803 receive_seq=803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=51.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.11 cputime=71.632 memavail=711012 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.460
Stats 1488.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12113 bytes_read=37161 bytes_retransmit=9 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=51.1 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.11 cputime=71.675 memavail=710996 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.460
Stats 1489.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12147 bytes_read=37380 bytes_retransmit=9 bytes_invalid=0 send_seq=809 receive_seq=809 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=51.0 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.7  sysload=0.11 cputime=71.718 memavail=711084 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.487
Stats 1490.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12192 bytes_read=37585 bytes_retransmit=9 bytes_invalid=0 send_seq=812 receive_seq=812 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=51.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.7  sysload=0.11 cputime=71.760 memavail=711192 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.487
Stats 1491.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12226 bytes_read=37791 bytes_retransmit=9 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=50.9 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.6  sysload=0.10 cputime=71.801 memavail=711088 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.487
Stats 1492.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12266 bytes_read=38026 bytes_retransmit=9 bytes_invalid=0 send_seq=819 receive_seq=819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=50.9 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.10 cputime=71.843 memavail=711268 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.487
Stats 1493.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12300 bytes_read=38217 bytes_retransmit=9 bytes_invalid=0 send_seq=822 receive_seq=822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=50.8 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.10 cputime=71.884 memavail=711068 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.487
Stats 1494.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12350 bytes_read=38428 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=0 temp=50.8 pwm=0.000 raspberry_pi: temp=44.8 mcu_temp: temp=31.7  sysload=0.10 cputime=71.929 memavail=711252 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 1495.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12384 bytes_read=38661 bytes_retransmit=9 bytes_invalid=0 send_seq=829 receive_seq=829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=0 temp=50.8 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.10 cputime=71.972 memavail=711452 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 1496.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12418 bytes_read=38852 bytes_retransmit=9 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=0 temp=50.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.8  sysload=0.17 cputime=72.014 memavail=711216 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 1497.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12452 bytes_read=39058 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=0 temp=50.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.17 cputime=72.058 memavail=711724 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 1498.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12502 bytes_read=39282 bytes_retransmit=9 bytes_invalid=0 send_seq=839 receive_seq=839 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=0 temp=50.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.17 cputime=72.101 memavail=711524 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.443
Stats 1499.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12536 bytes_read=39473 bytes_retransmit=9 bytes_invalid=0 send_seq=842 receive_seq=842 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=50.6 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.17 cputime=72.142 memavail=710336 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1500.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12570 bytes_read=39693 bytes_retransmit=9 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=50.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.17 cputime=72.184 memavail=710216 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1501.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12604 bytes_read=39912 bytes_retransmit=9 bytes_invalid=0 send_seq=848 receive_seq=848 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=50.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.6  sysload=0.32 cputime=72.226 memavail=710216 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1502.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12668 bytes_read=40113 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=50.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.32 cputime=72.269 memavail=709964 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.438
Stats 1503.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12702 bytes_read=40319 bytes_retransmit=9 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=50.4 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.32 cputime=72.313 memavail=710220 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.438
Stats 1504.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12736 bytes_read=40538 bytes_retransmit=9 bytes_invalid=0 send_seq=859 receive_seq=859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=50.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.32 cputime=72.356 memavail=711260 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.438
Stats 1505.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12770 bytes_read=40744 bytes_retransmit=9 bytes_invalid=0 send_seq=862 receive_seq=862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=50.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.32 cputime=72.398 memavail=710764 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.438
Stats 1506.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12820 bytes_read=40955 bytes_retransmit=9 bytes_invalid=0 send_seq=866 receive_seq=866 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=50.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.29 cputime=72.441 memavail=711024 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.497
Stats 1507.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12854 bytes_read=41169 bytes_retransmit=9 bytes_invalid=0 send_seq=869 receive_seq=869 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=50.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.29 cputime=72.484 memavail=711276 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.497
Stats 1508.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12888 bytes_read=41350 bytes_retransmit=9 bytes_invalid=0 send_seq=872 receive_seq=872 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=50.2 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.8  sysload=0.29 cputime=72.529 memavail=710772 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.497
Stats 1509.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=12922 bytes_read=41553 bytes_retransmit=9 bytes_invalid=0 send_seq=875 receive_seq=875 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=50.1 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.29 cputime=72.573 memavail=710436 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.497
Stats 1510.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=12972 bytes_read=41791 bytes_retransmit=9 bytes_invalid=0 send_seq=879 receive_seq=879 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=50.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.29 cputime=72.618 memavail=710356 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.491
Stats 1511.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13006 bytes_read=41982 bytes_retransmit=9 bytes_invalid=0 send_seq=882 receive_seq=882 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=50.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.27 cputime=72.661 memavail=709956 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.491
Stats 1512.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13040 bytes_read=42188 bytes_retransmit=9 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=50.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.27 cputime=72.707 memavail=709940 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.491
Stats 1513.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13090 bytes_read=42412 bytes_retransmit=9 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=50.0 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.9  sysload=0.27 cputime=72.751 memavail=710268 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.434
Stats 1514.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13124 bytes_read=42603 bytes_retransmit=9 bytes_invalid=0 send_seq=892 receive_seq=892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=49.9 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=32.0  sysload=0.27 cputime=72.794 memavail=710212 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.434
Stats 1515.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13158 bytes_read=42823 bytes_retransmit=9 bytes_invalid=0 send_seq=895 receive_seq=895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=49.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.27 cputime=72.837 memavail=710060 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.434
Stats 1516.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13208 bytes_read=43047 bytes_retransmit=9 bytes_invalid=0 send_seq=899 receive_seq=899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=49.8 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.7  sysload=0.25 cputime=72.879 memavail=710352 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.361
Stats 1517.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13258 bytes_read=43243 bytes_retransmit=9 bytes_invalid=0 send_seq=903 receive_seq=903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=49.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.25 cputime=72.923 memavail=710668 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.422
Stats 1518.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13292 bytes_read=43449 bytes_retransmit=9 bytes_invalid=0 send_seq=906 receive_seq=906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=49.7 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.6  sysload=0.25 cputime=72.965 memavail=710668 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.422
Stats 1519.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13342 bytes_read=43673 bytes_retransmit=9 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=49.7 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.25 cputime=73.008 memavail=711536 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.359
Stats 1520.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13392 bytes_read=43883 bytes_retransmit=9 bytes_invalid=0 send_seq=914 receive_seq=914 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=49.6 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.7  sysload=0.25 cputime=73.053 memavail=711360 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.426
Stats 1521.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13426 bytes_read=44089 bytes_retransmit=9 bytes_invalid=0 send_seq=917 receive_seq=917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=49.6 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.23 cputime=73.096 memavail=711360 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.426
Stats 1522.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13460 bytes_read=44308 bytes_retransmit=9 bytes_invalid=0 send_seq=920 receive_seq=920 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=49.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.23 cputime=73.139 memavail=711396 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.426
Stats 1523.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13494 bytes_read=44499 bytes_retransmit=9 bytes_invalid=0 send_seq=923 receive_seq=923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=49.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.23 cputime=73.181 memavail=711596 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.426
Stats 1524.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13528 bytes_read=44705 bytes_retransmit=9 bytes_invalid=0 send_seq=926 receive_seq=926 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=49.5 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.23 cputime=73.224 memavail=712168 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.426
Stats 1525.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=13594 bytes_read=44948 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=49.5 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.7  sysload=0.23 cputime=73.266 memavail=711704 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 1526.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=13628 bytes_read=45139 bytes_retransmit=9 bytes_invalid=0 send_seq=934 receive_seq=934 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=49.4 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.21 cputime=73.308 memavail=712204 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 1527.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=13662 bytes_read=45345 bytes_retransmit=9 bytes_invalid=0 send_seq=937 receive_seq=937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=49.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.21 cputime=73.350 memavail=712212 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1528.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=13696 bytes_read=45564 bytes_retransmit=9 bytes_invalid=0 send_seq=940 receive_seq=940 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=49.3 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.7  sysload=0.21 cputime=73.392 memavail=712464 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1529.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=13746 bytes_read=45760 bytes_retransmit=9 bytes_invalid=0 send_seq=944 receive_seq=944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=49.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.21 cputime=73.434 memavail=711308 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.466
Stats 1530.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=13780 bytes_read=45981 bytes_retransmit=9 bytes_invalid=0 send_seq=947 receive_seq=947 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=49.2 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.7  sysload=0.21 cputime=73.478 memavail=711784 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.466
Stats 1531.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=13814 bytes_read=46200 bytes_retransmit=9 bytes_invalid=0 send_seq=950 receive_seq=950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=49.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.19 cputime=73.521 memavail=712068 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.466
Stats 1532.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=13848 bytes_read=46391 bytes_retransmit=9 bytes_invalid=0 send_seq=953 receive_seq=953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=49.2 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.19 cputime=73.563 memavail=712376 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.466
Stats 1533.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=13898 bytes_read=46594 bytes_retransmit=9 bytes_invalid=0 send_seq=957 receive_seq=957 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=49.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.19 cputime=73.607 memavail=712660 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.436
Stats 1534.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=13932 bytes_read=46804 bytes_retransmit=9 bytes_invalid=0 send_seq=960 receive_seq=960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=49.1 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.19 cputime=73.649 memavail=713052 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.436
Stats 1535.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=13966 bytes_read=47009 bytes_retransmit=9 bytes_invalid=0 send_seq=963 receive_seq=963 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=49.1 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.6  sysload=0.19 cputime=73.692 memavail=713088 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.436
Stats 1536.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14000 bytes_read=47215 bytes_retransmit=9 bytes_invalid=0 send_seq=966 receive_seq=966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=49.0 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.7  sysload=0.18 cputime=73.735 memavail=713124 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.436
Stats 1537.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14050 bytes_read=47439 bytes_retransmit=9 bytes_invalid=0 send_seq=970 receive_seq=970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=49.0 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.6  sysload=0.18 cputime=73.777 memavail=713376 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.423
Stats 1538.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14084 bytes_read=47630 bytes_retransmit=9 bytes_invalid=0 send_seq=973 receive_seq=973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=0 temp=48.9 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.7  sysload=0.18 cputime=73.817 memavail=713576 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.423
Stats 1539.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14134 bytes_read=47841 bytes_retransmit=9 bytes_invalid=0 send_seq=977 receive_seq=977 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=0 temp=48.9 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.18 cputime=73.861 memavail=714328 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.372
Stats 1540.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14168 bytes_read=48074 bytes_retransmit=9 bytes_invalid=0 send_seq=980 receive_seq=980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=48.8 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.7  sysload=0.18 cputime=73.904 memavail=714192 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.372
Stats 1541.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14202 bytes_read=48265 bytes_retransmit=9 bytes_invalid=0 send_seq=983 receive_seq=983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=48.8 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.16 cputime=73.946 memavail=713916 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.372
Stats 1542.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14236 bytes_read=48471 bytes_retransmit=9 bytes_invalid=0 send_seq=986 receive_seq=986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=48.7 pwm=0.000 raspberry_pi: temp=44.8 mcu_temp: temp=31.7  sysload=0.16 cputime=73.988 memavail=713988 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.372
Stats 1543.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14286 bytes_read=48695 bytes_retransmit=9 bytes_invalid=0 send_seq=990 receive_seq=990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=48.7 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.5  sysload=0.16 cputime=74.031 memavail=714240 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.410
Stats 1544.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14320 bytes_read=48886 bytes_retransmit=9 bytes_invalid=0 send_seq=993 receive_seq=993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=48.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.16 cputime=74.073 memavail=715276 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.410
Stats 1545.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14354 bytes_read=49106 bytes_retransmit=9 bytes_invalid=0 send_seq=996 receive_seq=996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=48.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.16 cputime=74.115 memavail=715288 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.410
Stats 1546.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14404 bytes_read=49330 bytes_retransmit=9 bytes_invalid=0 send_seq=1000 receive_seq=1000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=48.6 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.23 cputime=74.159 memavail=715184 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 1547.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14438 bytes_read=49521 bytes_retransmit=9 bytes_invalid=0 send_seq=1003 receive_seq=1003 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=48.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.6  sysload=0.23 cputime=74.199 memavail=715548 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 1548.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14472 bytes_read=49727 bytes_retransmit=9 bytes_invalid=0 send_seq=1006 receive_seq=1006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=48.5 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.23 cputime=74.242 memavail=715748 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 1549.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14506 bytes_read=49946 bytes_retransmit=9 bytes_invalid=0 send_seq=1009 receive_seq=1009 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=48.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.23 cputime=74.284 memavail=715588 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.465
Stats 1550.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=14575 bytes_read=50167 bytes_retransmit=9 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=48.4 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.23 cputime=74.326 memavail=716212 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.460
Stats 1551.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=14609 bytes_read=50387 bytes_retransmit=9 bytes_invalid=0 send_seq=1018 receive_seq=1018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=48.4 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.21 cputime=74.368 memavail=716212 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.460
Stats 1552.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=14649 bytes_read=50592 bytes_retransmit=9 bytes_invalid=0 send_seq=1022 receive_seq=1021 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=48.4 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.7  sysload=0.21 cputime=74.409 memavail=716224 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.460
Stats 1553.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=14683 bytes_read=50799 bytes_retransmit=9 bytes_invalid=0 send_seq=1025 receive_seq=1025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=48.3 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.5  sysload=0.21 cputime=74.451 memavail=716476 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.460
Stats 1554.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=14717 bytes_read=51019 bytes_retransmit=9 bytes_invalid=0 send_seq=1028 receive_seq=1028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=48.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.7  sysload=0.21 cputime=74.493 memavail=716084 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.460
Stats 1555.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14767 bytes_read=51243 bytes_retransmit=9 bytes_invalid=0 send_seq=1032 receive_seq=1032 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=48.2 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.5  sysload=0.21 cputime=74.535 memavail=715608 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.464
Stats 1556.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14801 bytes_read=51434 bytes_retransmit=9 bytes_invalid=0 send_seq=1035 receive_seq=1035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=48.2 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.7  sysload=0.19 cputime=74.578 memavail=715868 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.464
Stats 1557.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14835 bytes_read=51654 bytes_retransmit=9 bytes_invalid=0 send_seq=1038 receive_seq=1038 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=48.1 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.19 cputime=74.620 memavail=715616 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.464
Stats 1558.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14869 bytes_read=51856 bytes_retransmit=9 bytes_invalid=0 send_seq=1041 receive_seq=1041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=48.1 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.19 cputime=74.662 memavail=716068 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.464
Stats 1559.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=14946 bytes_read=52047 bytes_retransmit=9 bytes_invalid=0 send_seq=1046 receive_seq=1046 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=48.1 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.19 cputime=74.705 memavail=715800 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.597
Stats 1560.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=15028 bytes_read=52293 bytes_retransmit=9 bytes_invalid=0 send_seq=1052 receive_seq=1052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=48.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.19 cputime=74.751 memavail=715884 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.738
Stats 1561.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=15094 bytes_read=52508 bytes_retransmit=9 bytes_invalid=0 send_seq=1057 receive_seq=1057 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=48.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.34 cputime=74.793 memavail=715632 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.4 pwm=0.904
Stats 1562.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=15153 bytes_read=52704 bytes_retransmit=9 bytes_invalid=0 send_seq=1061 receive_seq=1061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=48.0 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.34 cputime=74.835 memavail=715528 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.9 pwm=0.956
Stats 1563.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=15267 bytes_read=52934 bytes_retransmit=9 bytes_invalid=0 send_seq=1066 receive_seq=1066 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=47.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.34 cputime=74.879 memavail=715644 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.7 pwm=0.956
Stats 1564.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=15317 bytes_read=53144 bytes_retransmit=9 bytes_invalid=0 send_seq=1070 receive_seq=1070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=47.9 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.34 cputime=74.921 memavail=715140 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.6 pwm=0.877
Stats 1565.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000059 bytes_write=15378 bytes_read=53355 bytes_retransmit=9 bytes_invalid=0 send_seq=1074 receive_seq=1074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=47.9 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.34 cputime=74.963 memavail=714888 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.8 pwm=0.723
Stats 1566.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000059 bytes_write=15423 bytes_read=53575 bytes_retransmit=9 bytes_invalid=0 send_seq=1077 receive_seq=1077 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=47.8 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.31 cputime=75.005 memavail=714168 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.1 pwm=0.653
Stats 1567.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000059 bytes_write=15570 bytes_read=53800 bytes_retransmit=9 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=47.8 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.7  sysload=0.31 cputime=75.049 memavail=714172 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.6 pwm=0.510
Stats 1568.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000059 bytes_write=15619 bytes_read=53996 bytes_retransmit=9 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=47.7 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.7  sysload=0.31 cputime=75.091 memavail=714120 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.0 pwm=0.510
Stats 1569.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000059 bytes_write=15669 bytes_read=54221 bytes_retransmit=9 bytes_invalid=0 send_seq=1092 receive_seq=1092 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=47.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.31 cputime=75.133 memavail=715436 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.437
Stats 1570.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000060 bytes_write=15735 bytes_read=54451 bytes_retransmit=9 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=47.6 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.7  sysload=0.31 cputime=75.177 memavail=715184 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.381
Stats 1571.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000060 bytes_write=15769 bytes_read=54642 bytes_retransmit=9 bytes_invalid=0 send_seq=1100 receive_seq=1100 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=47.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.29 cputime=75.219 memavail=715448 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.381
Stats 1572.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000060 bytes_write=15803 bytes_read=54862 bytes_retransmit=9 bytes_invalid=0 send_seq=1103 receive_seq=1103 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=47.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.29 cputime=75.261 memavail=715456 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.381
Stats 1573.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000060 bytes_write=15853 bytes_read=55072 bytes_retransmit=9 bytes_invalid=0 send_seq=1107 receive_seq=1107 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=47.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.29 cputime=75.304 memavail=715204 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.439
Stats 1574.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000060 bytes_write=15887 bytes_read=55263 bytes_retransmit=9 bytes_invalid=0 send_seq=1110 receive_seq=1110 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=47.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.29 cputime=75.345 memavail=715988 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.439
Stats 1575.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=15951 bytes_read=55508 bytes_retransmit=9 bytes_invalid=0 send_seq=1115 receive_seq=1115 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=47.5 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.7  sysload=0.29 cputime=75.390 memavail=715744 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.516
Stats 1576.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=15985 bytes_read=55713 bytes_retransmit=9 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=47.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.7  sysload=0.26 cputime=75.432 memavail=715492 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.516
Stats 1577.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=16019 bytes_read=55904 bytes_retransmit=9 bytes_invalid=0 send_seq=1121 receive_seq=1121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=47.4 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.7  sysload=0.26 cputime=75.474 memavail=715492 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.516
Stats 1578.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=16053 bytes_read=56124 bytes_retransmit=9 bytes_invalid=0 send_seq=1124 receive_seq=1124 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=47.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.26 cputime=75.516 memavail=715500 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.516
Stats 1579.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=16103 bytes_read=56334 bytes_retransmit=9 bytes_invalid=0 send_seq=1128 receive_seq=1128 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=47.3 pwm=0.000 raspberry_pi: temp=44.8 mcu_temp: temp=31.6  sysload=0.26 cputime=75.558 memavail=715120 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.490
Stats 1580.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=16137 bytes_read=56540 bytes_retransmit=9 bytes_invalid=0 send_seq=1131 receive_seq=1131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=47.3 pwm=0.000 raspberry_pi: temp=44.8 mcu_temp: temp=31.6  sysload=0.26 cputime=75.600 memavail=715140 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.490
Stats 1581.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=16171 bytes_read=56760 bytes_retransmit=9 bytes_invalid=0 send_seq=1134 receive_seq=1134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=47.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.24 cputime=75.645 memavail=714896 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.490
Stats 1582.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=16205 bytes_read=56965 bytes_retransmit=9 bytes_invalid=0 send_seq=1137 receive_seq=1137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=47.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.24 cputime=75.687 memavail=715096 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.490
Stats 1583.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=16239 bytes_read=57156 bytes_retransmit=9 bytes_invalid=0 send_seq=1140 receive_seq=1140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=47.1 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.24 cputime=75.728 memavail=715152 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.490
Stats 1584.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=16289 bytes_read=57372 bytes_retransmit=9 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=47.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.24 cputime=75.772 memavail=715224 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.481
Stats 1585.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16323 bytes_read=57582 bytes_retransmit=9 bytes_invalid=0 send_seq=1147 receive_seq=1147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=47.1 pwm=0.000 raspberry_pi: temp=45.1 mcu_temp: temp=31.6  sysload=0.24 cputime=75.813 memavail=715292 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.481
Stats 1586.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16357 bytes_read=57773 bytes_retransmit=9 bytes_invalid=0 send_seq=1150 receive_seq=1150 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=47.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.22 cputime=75.861 memavail=716264 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.481
Stats 1587.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16391 bytes_read=57993 bytes_retransmit=9 bytes_invalid=0 send_seq=1153 receive_seq=1153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=47.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.22 cputime=75.900 memavail=716316 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.481
Stats 1588.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16441 bytes_read=58203 bytes_retransmit=9 bytes_invalid=0 send_seq=1157 receive_seq=1157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=47.0 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.22 cputime=75.940 memavail=716532 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.490
Stats 1589.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16475 bytes_read=58394 bytes_retransmit=9 bytes_invalid=0 send_seq=1160 receive_seq=1160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=46.9 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.22 cputime=75.979 memavail=716956 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.490
Stats 1590.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16509 bytes_read=58628 bytes_retransmit=9 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=46.9 pwm=0.000 raspberry_pi: temp=44.8 mcu_temp: temp=31.6  sysload=0.22 cputime=76.019 memavail=716956 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.490
Stats 1591.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16543 bytes_read=58833 bytes_retransmit=9 bytes_invalid=0 send_seq=1166 receive_seq=1166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=46.9 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.20 cputime=76.060 memavail=716708 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.490
Stats 1592.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16593 bytes_read=59029 bytes_retransmit=9 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=46.8 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.5  sysload=0.20 cputime=76.098 memavail=716212 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.458
Stats 1593.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16627 bytes_read=59249 bytes_retransmit=9 bytes_invalid=0 send_seq=1173 receive_seq=1173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=46.8 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.20 cputime=76.137 memavail=716424 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.458
Stats 1594.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16661 bytes_read=59454 bytes_retransmit=9 bytes_invalid=0 send_seq=1176 receive_seq=1176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=46.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.20 cputime=76.175 memavail=717812 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.458
Stats 1595.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16695 bytes_read=59659 bytes_retransmit=9 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=46.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.20 cputime=76.216 memavail=718312 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.458
Stats 1596.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16745 bytes_read=59884 bytes_retransmit=9 bytes_invalid=0 send_seq=1183 receive_seq=1183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=46.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.19 cputime=76.253 memavail=718316 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.472
Stats 1597.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16779 bytes_read=60089 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=46.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.19 cputime=76.291 memavail=718268 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.472
Stats 1598.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16813 bytes_read=60280 bytes_retransmit=9 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=46.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.4  sysload=0.19 cputime=76.327 memavail=718576 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.472
Stats 1599.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16847 bytes_read=60500 bytes_retransmit=9 bytes_invalid=0 send_seq=1192 receive_seq=1192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=46.5 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.4  sysload=0.19 cputime=76.365 memavail=717696 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.472
Stats 1600.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16892 bytes_read=60719 bytes_retransmit=9 bytes_invalid=0 send_seq=1195 receive_seq=1195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=46.5 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.19 cputime=76.408 memavail=718192 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.487
Stats 1601.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16940 bytes_read=60915 bytes_retransmit=9 bytes_invalid=0 send_seq=1199 receive_seq=1199 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=46.5 pwm=0.000 raspberry_pi: temp=45.0 mcu_temp: temp=31.5  sysload=0.33 cputime=76.446 memavail=718256 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.487
Stats 1602.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=16974 bytes_read=61135 bytes_retransmit=9 bytes_invalid=0 send_seq=1202 receive_seq=1202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=46.4 pwm=0.000 raspberry_pi: temp=45.3 mcu_temp: temp=31.5  sysload=0.33 cputime=76.486 memavail=718508 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.487
Stats 1603.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17008 bytes_read=61340 bytes_retransmit=9 bytes_invalid=0 send_seq=1205 receive_seq=1205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=46.4 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.6  sysload=0.33 cputime=76.523 memavail=718708 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.487
Stats 1604.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17042 bytes_read=61531 bytes_retransmit=9 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=46.4 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.6  sysload=0.33 cputime=76.561 memavail=718628 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.487
Stats 1605.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=17087 bytes_read=61780 bytes_retransmit=9 bytes_invalid=0 send_seq=1211 receive_seq=1211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=46.3 pwm=0.000 raspberry_pi: temp=45.5 mcu_temp: temp=31.7  sysload=0.33 cputime=76.601 memavail=718628 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.499
Stats 1606.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=17137 bytes_read=61976 bytes_retransmit=9 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=46.3 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.31 cputime=76.638 memavail=718628 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.499
Stats 1607.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=17187 bytes_read=62172 bytes_retransmit=9 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=46.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.4  sysload=0.31 cputime=76.679 memavail=718388 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.436
Stats 1608.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=17221 bytes_read=62406 bytes_retransmit=9 bytes_invalid=0 send_seq=1222 receive_seq=1222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=46.2 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.31 cputime=76.717 memavail=718388 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.436
Stats 1609.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=17255 bytes_read=62594 bytes_retransmit=9 bytes_invalid=0 send_seq=1225 receive_seq=1225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=46.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.7  sysload=0.31 cputime=76.755 memavail=717728 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.436
Stats 1610.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17289 bytes_read=62789 bytes_retransmit=9 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=46.1 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.31 cputime=76.791 memavail=717728 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.436
Stats 1611.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17339 bytes_read=63022 bytes_retransmit=9 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=46.1 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.6  sysload=0.28 cputime=76.830 memavail=717476 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 1612.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17373 bytes_read=63213 bytes_retransmit=9 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=46.0 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.6  sysload=0.28 cputime=76.875 memavail=717476 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 1613.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17407 bytes_read=63404 bytes_retransmit=9 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=46.0 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.28 cputime=76.912 memavail=717484 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1614.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17447 bytes_read=63654 bytes_retransmit=9 bytes_invalid=0 send_seq=1242 receive_seq=1242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=46.0 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.6  sysload=0.28 cputime=76.952 memavail=716572 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1615.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17497 bytes_read=63864 bytes_retransmit=9 bytes_invalid=0 send_seq=1246 receive_seq=1246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=45.9 pwm=0.000 raspberry_pi: temp=45.3 mcu_temp: temp=31.6  sysload=0.28 cputime=76.990 memavail=716824 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.539
Stats 1616.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17531 bytes_read=64055 bytes_retransmit=9 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=45.9 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.6  sysload=0.34 cputime=77.028 memavail=717576 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.539
Stats 1617.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17565 bytes_read=64289 bytes_retransmit=9 bytes_invalid=0 send_seq=1252 receive_seq=1252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996964 heater_bed: target=0 temp=45.8 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.6  sysload=0.34 cputime=77.067 memavail=717580 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.539
Stats 1618.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17615 bytes_read=64485 bytes_retransmit=9 bytes_invalid=0 send_seq=1256 receive_seq=1256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=0 temp=45.8 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.6  sysload=0.34 cputime=77.106 memavail=718036 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1619.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17649 bytes_read=64691 bytes_retransmit=9 bytes_invalid=0 send_seq=1259 receive_seq=1259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996958 heater_bed: target=0 temp=45.8 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.34 cputime=77.148 memavail=717452 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.482
Stats 1620.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17683 bytes_read=64924 bytes_retransmit=9 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=0 temp=45.8 pwm=0.000 raspberry_pi: temp=45.2 mcu_temp: temp=31.7  sysload=0.34 cputime=77.188 memavail=717452 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1621.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17733 bytes_read=65120 bytes_retransmit=9 bytes_invalid=0 send_seq=1266 receive_seq=1266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996955 heater_bed: target=0 temp=45.8 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.31 cputime=77.227 memavail=717452 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.429
Stats 1622.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17767 bytes_read=65326 bytes_retransmit=9 bytes_invalid=0 send_seq=1269 receive_seq=1269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=0 temp=45.7 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.31 cputime=77.267 memavail=717956 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.429
Stats 1623.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17801 bytes_read=65545 bytes_retransmit=9 bytes_invalid=0 send_seq=1272 receive_seq=1272 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=0 temp=45.7 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.31 cputime=77.305 memavail=717464 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.429
Stats 1624.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17835 bytes_read=65736 bytes_retransmit=9 bytes_invalid=0 send_seq=1275 receive_seq=1275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=0 temp=45.6 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.7  sysload=0.31 cputime=77.343 memavail=716848 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.429
Stats 1625.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17885 bytes_read=65961 bytes_retransmit=9 bytes_invalid=0 send_seq=1279 receive_seq=1279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=0 temp=45.6 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.31 cputime=77.380 memavail=716596 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.475
Stats 1626.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17919 bytes_read=66180 bytes_retransmit=9 bytes_invalid=0 send_seq=1282 receive_seq=1282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=0 temp=45.6 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.37 cputime=77.419 memavail=716344 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.475
Stats 1627.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17953 bytes_read=66371 bytes_retransmit=9 bytes_invalid=0 send_seq=1285 receive_seq=1285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=0 temp=45.5 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.6  sysload=0.37 cputime=77.457 memavail=716624 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.475
Stats 1628.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=17987 bytes_read=66577 bytes_retransmit=9 bytes_invalid=0 send_seq=1288 receive_seq=1288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=0 temp=45.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.37 cputime=77.496 memavail=716884 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.475
Stats 1629.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18051 bytes_read=66806 bytes_retransmit=9 bytes_invalid=0 send_seq=1293 receive_seq=1293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=45.5 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.6  sysload=0.37 cputime=77.536 memavail=717548 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.521
Stats 1630.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=18085 bytes_read=67012 bytes_retransmit=9 bytes_invalid=0 send_seq=1296 receive_seq=1296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=45.5 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.4  sysload=0.37 cputime=77.575 memavail=717548 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.521
Stats 1631.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=18119 bytes_read=67218 bytes_retransmit=9 bytes_invalid=0 send_seq=1299 receive_seq=1299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=45.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.8  sysload=0.50 cputime=77.614 memavail=717300 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.521
Stats 1632.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=18153 bytes_read=67437 bytes_retransmit=9 bytes_invalid=0 send_seq=1302 receive_seq=1302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=45.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.50 cputime=77.652 memavail=717300 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.521
Stats 1633.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=18203 bytes_read=67633 bytes_retransmit=9 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=45.3 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.7  sysload=0.50 cputime=77.691 memavail=716804 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.474
Stats 1634.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=18237 bytes_read=67839 bytes_retransmit=9 bytes_invalid=0 send_seq=1309 receive_seq=1309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=45.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.50 cputime=77.730 memavail=716940 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.474
Stats 1635.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18271 bytes_read=68063 bytes_retransmit=9 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=45.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.50 cputime=77.769 memavail=716992 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 1636.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18305 bytes_read=68244 bytes_retransmit=9 bytes_invalid=0 send_seq=1315 receive_seq=1315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=45.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.62 cputime=77.806 memavail=717624 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 1637.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18339 bytes_read=68450 bytes_retransmit=9 bytes_invalid=0 send_seq=1318 receive_seq=1318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=45.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.62 cputime=77.844 memavail=717624 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.474
Stats 1638.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18389 bytes_read=68674 bytes_retransmit=9 bytes_invalid=0 send_seq=1322 receive_seq=1322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=45.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.62 cputime=77.883 memavail=718164 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1639.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18423 bytes_read=68865 bytes_retransmit=9 bytes_invalid=0 send_seq=1325 receive_seq=1325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=45.1 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.7  sysload=0.62 cputime=77.921 memavail=719444 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1640.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18457 bytes_read=69085 bytes_retransmit=9 bytes_invalid=0 send_seq=1328 receive_seq=1328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=45.1 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.62 cputime=77.959 memavail=719192 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1641.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18491 bytes_read=69304 bytes_retransmit=9 bytes_invalid=0 send_seq=1331 receive_seq=1331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=45.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.73 cputime=77.998 memavail=719204 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.443
Stats 1642.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18541 bytes_read=69500 bytes_retransmit=9 bytes_invalid=0 send_seq=1335 receive_seq=1335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=45.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.73 cputime=78.035 memavail=719204 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1643.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18575 bytes_read=69706 bytes_retransmit=9 bytes_invalid=0 send_seq=1338 receive_seq=1338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=45.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.73 cputime=78.073 memavail=719208 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1644.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18609 bytes_read=69925 bytes_retransmit=9 bytes_invalid=0 send_seq=1341 receive_seq=1341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=45.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.73 cputime=78.112 memavail=718404 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1645.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18643 bytes_read=70130 bytes_retransmit=9 bytes_invalid=0 send_seq=1344 receive_seq=1344 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=44.9 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.73 cputime=78.150 memavail=718664 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.473
Stats 1646.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18688 bytes_read=70336 bytes_retransmit=9 bytes_invalid=0 send_seq=1347 receive_seq=1347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=44.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.83 cputime=78.188 memavail=718864 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1647.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18722 bytes_read=70555 bytes_retransmit=9 bytes_invalid=0 send_seq=1350 receive_seq=1350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=44.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.7  sysload=0.83 cputime=78.227 memavail=719676 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1648.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18756 bytes_read=70746 bytes_retransmit=9 bytes_invalid=0 send_seq=1353 receive_seq=1353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=44.9 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.83 cputime=78.265 memavail=719172 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1649.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18790 bytes_read=70952 bytes_retransmit=9 bytes_invalid=0 send_seq=1356 receive_seq=1356 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=44.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.83 cputime=78.303 memavail=718556 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 1650.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18840 bytes_read=71190 bytes_retransmit=9 bytes_invalid=0 send_seq=1360 receive_seq=1360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=44.8 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.83 cputime=78.342 memavail=718808 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.489
Stats 1651.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18874 bytes_read=71381 bytes_retransmit=9 bytes_invalid=0 send_seq=1363 receive_seq=1363 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=44.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.84 cputime=78.380 memavail=719060 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.489
Stats 1652.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18908 bytes_read=71587 bytes_retransmit=9 bytes_invalid=0 send_seq=1366 receive_seq=1366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=44.7 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.7  sysload=0.84 cputime=78.419 memavail=719564 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.489
Stats 1653.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18942 bytes_read=71806 bytes_retransmit=9 bytes_invalid=0 send_seq=1369 receive_seq=1369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=44.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.84 cputime=78.460 memavail=719564 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.489
Stats 1654.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=18992 bytes_read=72002 bytes_retransmit=9 bytes_invalid=0 send_seq=1373 receive_seq=1373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=44.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.84 cputime=78.498 memavail=719700 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.473
Stats 1655.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19026 bytes_read=72222 bytes_retransmit=9 bytes_invalid=0 send_seq=1376 receive_seq=1376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=44.6 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.9  sysload=0.84 cputime=78.537 memavail=719704 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.473
Stats 1656.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19060 bytes_read=72441 bytes_retransmit=9 bytes_invalid=0 send_seq=1379 receive_seq=1379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=44.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.94 cputime=78.575 memavail=719704 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.473
Stats 1657.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19094 bytes_read=72632 bytes_retransmit=9 bytes_invalid=0 send_seq=1382 receive_seq=1382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=44.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.8  sysload=0.94 cputime=78.612 memavail=719704 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.473
Stats 1658.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19128 bytes_read=72838 bytes_retransmit=9 bytes_invalid=0 send_seq=1385 receive_seq=1385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=44.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.8  sysload=0.94 cputime=78.650 memavail=719200 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.473
Stats 1659.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19178 bytes_read=73062 bytes_retransmit=9 bytes_invalid=0 send_seq=1389 receive_seq=1389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=44.5 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.94 cputime=78.689 memavail=719208 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.488
Stats 1660.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=19242 bytes_read=73278 bytes_retransmit=9 bytes_invalid=0 send_seq=1394 receive_seq=1394 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=44.5 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.94 cputime=78.727 memavail=719208 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.437
Stats 1661.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=19276 bytes_read=73473 bytes_retransmit=9 bytes_invalid=0 send_seq=1397 receive_seq=1397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=44.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.86 cputime=78.765 memavail=719460 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.437
Stats 1662.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=19321 bytes_read=73686 bytes_retransmit=9 bytes_invalid=0 send_seq=1400 receive_seq=1400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=44.4 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.86 cputime=78.803 memavail=719156 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1663.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=19355 bytes_read=73877 bytes_retransmit=9 bytes_invalid=0 send_seq=1403 receive_seq=1403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=44.4 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.9  sysload=0.86 cputime=78.840 memavail=719460 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.489
Stats 1664.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=19389 bytes_read=74083 bytes_retransmit=9 bytes_invalid=0 send_seq=1406 receive_seq=1406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=44.3 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.86 cputime=78.878 memavail=718464 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1665.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19423 bytes_read=74316 bytes_retransmit=9 bytes_invalid=0 send_seq=1409 receive_seq=1409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=44.3 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.86 cputime=78.917 memavail=718592 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1666.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19457 bytes_read=74507 bytes_retransmit=9 bytes_invalid=0 send_seq=1412 receive_seq=1412 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=44.3 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.6  sysload=0.79 cputime=78.954 memavail=718592 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1667.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19507 bytes_read=74718 bytes_retransmit=9 bytes_invalid=0 send_seq=1416 receive_seq=1416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=44.2 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.5  sysload=0.79 cputime=78.993 memavail=718592 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1668.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19541 bytes_read=74937 bytes_retransmit=9 bytes_invalid=0 send_seq=1419 receive_seq=1419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=44.2 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.6  sysload=0.79 cputime=79.030 memavail=718592 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 1669.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19575 bytes_read=75128 bytes_retransmit=9 bytes_invalid=0 send_seq=1422 receive_seq=1422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=44.2 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.6  sysload=0.79 cputime=79.067 memavail=718600 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.481
Stats 1670.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19609 bytes_read=75348 bytes_retransmit=9 bytes_invalid=0 send_seq=1425 receive_seq=1425 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=44.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.79 cputime=79.105 memavail=718600 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.481
Stats 1671.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19659 bytes_read=75572 bytes_retransmit=9 bytes_invalid=0 send_seq=1429 receive_seq=1429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=44.1 pwm=0.000 raspberry_pi: temp=45.1 mcu_temp: temp=31.4  sysload=0.73 cputime=79.143 memavail=718600 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 1672.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19693 bytes_read=75763 bytes_retransmit=9 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=44.1 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.73 cputime=79.179 memavail=718352 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 1673.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19727 bytes_read=75969 bytes_retransmit=9 bytes_invalid=0 send_seq=1435 receive_seq=1435 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=44.0 pwm=0.000 raspberry_pi: temp=45.1 mcu_temp: temp=31.6  sysload=0.73 cputime=79.216 memavail=718352 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 1674.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19767 bytes_read=76188 bytes_retransmit=9 bytes_invalid=0 send_seq=1439 receive_seq=1438 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=44.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.4  sysload=0.73 cputime=79.257 memavail=719220 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.483
Stats 1675.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19817 bytes_read=76414 bytes_retransmit=9 bytes_invalid=0 send_seq=1443 receive_seq=1443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=44.0 pwm=0.000 raspberry_pi: temp=44.8 mcu_temp: temp=31.6  sysload=0.73 cputime=79.294 memavail=719228 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.470
Stats 1676.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19851 bytes_read=76620 bytes_retransmit=9 bytes_invalid=0 send_seq=1446 receive_seq=1446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=43.9 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.6  sysload=0.67 cputime=79.331 memavail=719536 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.470
Stats 1677.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19896 bytes_read=76839 bytes_retransmit=9 bytes_invalid=0 send_seq=1449 receive_seq=1449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=43.9 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.67 cputime=79.368 memavail=719536 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.416
Stats 1678.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19930 bytes_read=77030 bytes_retransmit=9 bytes_invalid=0 send_seq=1452 receive_seq=1452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=43.9 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.67 cputime=79.404 memavail=719496 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.416
Stats 1679.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19964 bytes_read=77250 bytes_retransmit=9 bytes_invalid=0 send_seq=1455 receive_seq=1455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=43.8 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.8  sysload=0.67 cputime=79.445 memavail=717492 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.416
Stats 1680.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=19998 bytes_read=77469 bytes_retransmit=9 bytes_invalid=0 send_seq=1458 receive_seq=1458 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=43.8 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.6  sysload=0.67 cputime=79.481 memavail=717492 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.416
Stats 1681.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20032 bytes_read=77660 bytes_retransmit=9 bytes_invalid=0 send_seq=1461 receive_seq=1461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=43.7 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.7  sysload=0.70 cputime=79.517 memavail=717520 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.416
Stats 1682.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20082 bytes_read=77885 bytes_retransmit=9 bytes_invalid=0 send_seq=1465 receive_seq=1465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=43.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.6  sysload=0.70 cputime=79.555 memavail=717800 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.429
Stats 1683.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20148 bytes_read=78100 bytes_retransmit=9 bytes_invalid=0 send_seq=1470 receive_seq=1470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=43.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.70 cputime=79.593 memavail=717828 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.432
Stats 1684.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20198 bytes_read=78296 bytes_retransmit=9 bytes_invalid=0 send_seq=1474 receive_seq=1474 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=43.6 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.7  sysload=0.70 cputime=79.633 memavail=717196 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 1685.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20232 bytes_read=78530 bytes_retransmit=9 bytes_invalid=0 send_seq=1477 receive_seq=1477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=43.6 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.7  sysload=0.70 cputime=79.670 memavail=717196 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 1686.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20282 bytes_read=78733 bytes_retransmit=9 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=43.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.64 cputime=79.708 memavail=717196 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.535
Stats 1687.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20316 bytes_read=78914 bytes_retransmit=9 bytes_invalid=0 send_seq=1484 receive_seq=1484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=43.5 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.8  sysload=0.64 cputime=79.744 memavail=717732 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.535
Stats 1688.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20366 bytes_read=79139 bytes_retransmit=9 bytes_invalid=0 send_seq=1488 receive_seq=1488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=43.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.64 cputime=79.782 memavail=717760 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.589
Stats 1689.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20435 bytes_read=79359 bytes_retransmit=9 bytes_invalid=0 send_seq=1494 receive_seq=1494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=43.4 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.7  sysload=0.64 cputime=79.820 memavail=717160 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.642
Stats 1690.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20490 bytes_read=79575 bytes_retransmit=9 bytes_invalid=0 send_seq=1499 receive_seq=1499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=43.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.64 cputime=79.858 memavail=717196 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.642
Stats 1691.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20524 bytes_read=79795 bytes_retransmit=9 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=43.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.59 cputime=79.894 memavail=716944 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.642
Stats 1692.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20574 bytes_read=79987 bytes_retransmit=9 bytes_invalid=0 send_seq=1506 receive_seq=1506 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=43.4 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.7  sysload=0.59 cputime=79.933 memavail=717244 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.569
Stats 1693.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20624 bytes_read=80183 bytes_retransmit=9 bytes_invalid=0 send_seq=1510 receive_seq=1510 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=43.3 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.59 cputime=79.971 memavail=717244 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.492
Stats 1694.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20658 bytes_read=80403 bytes_retransmit=9 bytes_invalid=0 send_seq=1513 receive_seq=1513 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=43.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.7  sysload=0.59 cputime=80.011 memavail=715844 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.492
Stats 1695.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20724 bytes_read=80633 bytes_retransmit=9 bytes_invalid=0 send_seq=1518 receive_seq=1518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=43.2 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.9  sysload=0.59 cputime=80.049 memavail=715896 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.423
Stats 1696.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20758 bytes_read=80824 bytes_retransmit=9 bytes_invalid=0 send_seq=1521 receive_seq=1521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=43.2 pwm=0.000 raspberry_pi: temp=44.8 mcu_temp: temp=31.8  sysload=0.54 cputime=80.086 memavail=716176 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.423
Stats 1697.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20792 bytes_read=81044 bytes_retransmit=9 bytes_invalid=0 send_seq=1524 receive_seq=1524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=0 temp=43.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.54 cputime=80.122 memavail=716204 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.423
Stats 1698.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20826 bytes_read=81249 bytes_retransmit=9 bytes_invalid=0 send_seq=1527 receive_seq=1527 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996938 heater_bed: target=0 temp=43.2 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.7  sysload=0.54 cputime=80.159 memavail=716204 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.423
Stats 1699.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=20862 bytes_read=81422 bytes_retransmit=9 bytes_invalid=0 send_seq=1530 receive_seq=1530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=43.1 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.54 cputime=80.198 memavail=715000 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.436
Stats 1700.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20896 bytes_read=81674 bytes_retransmit=9 bytes_invalid=0 send_seq=1533 receive_seq=1533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=43.1 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.7  sysload=0.54 cputime=80.237 memavail=715600 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.436
Stats 1701.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20930 bytes_read=81879 bytes_retransmit=9 bytes_invalid=0 send_seq=1536 receive_seq=1536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=43.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.50 cputime=80.275 memavail=715888 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.436
Stats 1702.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20964 bytes_read=82070 bytes_retransmit=9 bytes_invalid=0 send_seq=1539 receive_seq=1539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=43.1 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.7  sysload=0.50 cputime=80.311 memavail=716148 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.436
Stats 1703.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=20998 bytes_read=82290 bytes_retransmit=9 bytes_invalid=0 send_seq=1542 receive_seq=1542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=0 temp=43.0 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.50 cputime=80.348 memavail=715908 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.436
Stats 1704.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21048 bytes_read=82482 bytes_retransmit=9 bytes_invalid=0 send_seq=1546 receive_seq=1546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=43.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.50 cputime=80.387 memavail=716432 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.495
Stats 1705.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21082 bytes_read=82687 bytes_retransmit=9 bytes_invalid=0 send_seq=1549 receive_seq=1549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=0 temp=43.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.7  sysload=0.50 cputime=80.423 memavail=715432 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.495
Stats 1706.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21116 bytes_read=82907 bytes_retransmit=9 bytes_invalid=0 send_seq=1552 receive_seq=1552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996945 heater_bed: target=0 temp=42.9 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.46 cputime=80.460 memavail=715432 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.495
Stats 1707.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21150 bytes_read=83107 bytes_retransmit=9 bytes_invalid=0 send_seq=1555 receive_seq=1554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=0 temp=42.9 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.46 cputime=80.495 memavail=715468 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 1708.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21186 bytes_read=83303 bytes_retransmit=9 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996943 heater_bed: target=0 temp=42.9 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.46 cputime=80.531 memavail=715984 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 1709.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21220 bytes_read=83523 bytes_retransmit=9 bytes_invalid=0 send_seq=1561 receive_seq=1561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996940 heater_bed: target=0 temp=42.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.46 cputime=80.567 memavail=716020 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 1710.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21254 bytes_read=83728 bytes_retransmit=9 bytes_invalid=0 send_seq=1564 receive_seq=1564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=0 temp=42.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.46 cputime=80.604 memavail=715816 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 1711.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21288 bytes_read=83933 bytes_retransmit=9 bytes_invalid=0 send_seq=1567 receive_seq=1567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=42.8 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.7  sysload=0.58 cputime=80.640 memavail=715828 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 1712.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21338 bytes_read=84146 bytes_retransmit=9 bytes_invalid=0 send_seq=1571 receive_seq=1571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=0 temp=42.8 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.58 cputime=80.677 memavail=715744 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 1713.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21372 bytes_read=84345 bytes_retransmit=9 bytes_invalid=0 send_seq=1574 receive_seq=1574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=42.7 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.58 cputime=80.712 memavail=715240 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 1714.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21406 bytes_read=84536 bytes_retransmit=9 bytes_invalid=0 send_seq=1577 receive_seq=1577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=42.7 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.58 cputime=80.751 memavail=716200 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 1715.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21440 bytes_read=84756 bytes_retransmit=9 bytes_invalid=0 send_seq=1580 receive_seq=1580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=42.6 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.7  sysload=0.58 cputime=80.788 memavail=714900 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 1716.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21490 bytes_read=84980 bytes_retransmit=9 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=42.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.54 cputime=80.825 memavail=715460 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1717.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21524 bytes_read=85171 bytes_retransmit=9 bytes_invalid=0 send_seq=1587 receive_seq=1587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=42.6 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.54 cputime=80.861 memavail=715464 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1718.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21558 bytes_read=85391 bytes_retransmit=9 bytes_invalid=0 send_seq=1590 receive_seq=1590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=42.6 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.6  sysload=0.54 cputime=80.898 memavail=715464 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1719.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21592 bytes_read=85596 bytes_retransmit=9 bytes_invalid=0 send_seq=1593 receive_seq=1593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=42.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.54 cputime=80.935 memavail=715608 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.469
Stats 1720.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21642 bytes_read=85792 bytes_retransmit=9 bytes_invalid=0 send_seq=1597 receive_seq=1597 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=42.5 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.6  sysload=0.54 cputime=80.976 memavail=715616 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 1721.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21676 bytes_read=86026 bytes_retransmit=9 bytes_invalid=0 send_seq=1600 receive_seq=1600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=42.5 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.49 cputime=81.012 memavail=715620 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 1722.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21719 bytes_read=86231 bytes_retransmit=9 bytes_invalid=0 send_seq=1604 receive_seq=1603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=42.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.49 cputime=81.049 memavail=715876 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 1723.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21758 bytes_read=86427 bytes_retransmit=9 bytes_invalid=0 send_seq=1607 receive_seq=1607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=42.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.49 cputime=81.085 memavail=716128 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 1724.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21792 bytes_read=86661 bytes_retransmit=9 bytes_invalid=0 send_seq=1610 receive_seq=1610 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=42.4 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.49 cputime=81.126 memavail=715756 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1725.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=21837 bytes_read=86852 bytes_retransmit=9 bytes_invalid=0 send_seq=1613 receive_seq=1613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=42.4 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.49 cputime=81.162 memavail=715760 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1726.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=21871 bytes_read=87058 bytes_retransmit=9 bytes_invalid=0 send_seq=1616 receive_seq=1616 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=42.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.45 cputime=81.198 memavail=715760 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1727.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=21905 bytes_read=87292 bytes_retransmit=9 bytes_invalid=0 send_seq=1619 receive_seq=1619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=42.3 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.45 cputime=81.235 memavail=715772 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1728.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=21939 bytes_read=87483 bytes_retransmit=9 bytes_invalid=0 send_seq=1622 receive_seq=1622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=42.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.45 cputime=81.272 memavail=715556 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 1729.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=21989 bytes_read=87679 bytes_retransmit=9 bytes_invalid=0 send_seq=1626 receive_seq=1626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=42.3 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.45 cputime=81.312 memavail=715180 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.450
Stats 1731.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=22023 bytes_read=87913 bytes_retransmit=9 bytes_invalid=0 send_seq=1629 receive_seq=1629 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=42.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.4  sysload=0.45 cputime=81.355 memavail=715180 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.450
Stats 1732.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22057 bytes_read=88118 bytes_retransmit=9 bytes_invalid=0 send_seq=1632 receive_seq=1632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=42.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.4  sysload=0.42 cputime=81.397 memavail=714940 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.450
Stats 1733.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22091 bytes_read=88324 bytes_retransmit=9 bytes_invalid=0 send_seq=1635 receive_seq=1635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=42.2 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.3  sysload=0.42 cputime=81.440 memavail=714688 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.450
Stats 1734.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22141 bytes_read=88548 bytes_retransmit=9 bytes_invalid=0 send_seq=1639 receive_seq=1639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=42.1 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.42 cputime=81.483 memavail=714688 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.472
Stats 1735.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22175 bytes_read=88739 bytes_retransmit=9 bytes_invalid=0 send_seq=1642 receive_seq=1642 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=42.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.42 cputime=81.524 memavail=714616 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.472
Stats 1736.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22215 bytes_read=88961 bytes_retransmit=9 bytes_invalid=0 send_seq=1646 receive_seq=1646 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=42.1 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.5  sysload=0.42 cputime=81.568 memavail=714120 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.472
Stats 1737.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22249 bytes_read=89194 bytes_retransmit=9 bytes_invalid=0 send_seq=1649 receive_seq=1649 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=42.1 pwm=0.000 raspberry_pi: temp=44.8 mcu_temp: temp=31.2  sysload=0.38 cputime=81.611 memavail=714128 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.472
Stats 1738.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22299 bytes_read=89383 bytes_retransmit=9 bytes_invalid=0 send_seq=1653 receive_seq=1653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=42.0 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.38 cputime=81.654 memavail=714632 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.464
Stats 1739.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22333 bytes_read=89578 bytes_retransmit=9 bytes_invalid=0 send_seq=1656 receive_seq=1656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=42.0 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.38 cputime=81.696 memavail=714632 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.464
Stats 1740.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22367 bytes_read=89795 bytes_retransmit=9 bytes_invalid=0 send_seq=1659 receive_seq=1659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=42.0 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.5  sysload=0.38 cputime=81.738 memavail=714008 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.464
Stats 1741.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22401 bytes_read=89986 bytes_retransmit=9 bytes_invalid=0 send_seq=1662 receive_seq=1662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=41.9 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.3  sysload=0.38 cputime=81.779 memavail=714260 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.464
Stats 1742.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22451 bytes_read=90211 bytes_retransmit=9 bytes_invalid=0 send_seq=1666 receive_seq=1666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=41.9 pwm=0.000 raspberry_pi: temp=45.3 mcu_temp: temp=31.5  sysload=0.35 cputime=81.824 memavail=714524 print_time=75.119 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.523
Stats 1743.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22757 bytes_read=90460 bytes_retransmit=9 bytes_invalid=0 send_seq=1675 receive_seq=1675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=41.9 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.35 cputime=81.877 memavail=715028 print_time=423.532 buffer_time=9.645 print_stall=0 extruder: target=200 temp=199.9 pwm=0.462
Stats 1744.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22791 bytes_read=90651 bytes_retransmit=9 bytes_invalid=0 send_seq=1678 receive_seq=1678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=41.9 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.3  sysload=0.35 cputime=81.919 memavail=715028 print_time=423.532 buffer_time=8.643 print_stall=0 extruder: target=200 temp=199.9 pwm=0.462
Stats 1745.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22825 bytes_read=90857 bytes_retransmit=9 bytes_invalid=0 send_seq=1681 receive_seq=1681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=41.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.35 cputime=81.963 memavail=714696 print_time=423.532 buffer_time=7.639 print_stall=0 extruder: target=200 temp=199.9 pwm=0.462
Stats 1746.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=22875 bytes_read=91081 bytes_retransmit=9 bytes_invalid=0 send_seq=1685 receive_seq=1685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=41.8 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.4  sysload=0.35 cputime=82.006 memavail=714696 print_time=423.532 buffer_time=6.636 print_stall=0 extruder: target=200 temp=199.9 pwm=0.513
Stats 1747.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=22909 bytes_read=91287 bytes_retransmit=9 bytes_invalid=0 send_seq=1688 receive_seq=1688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=41.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.32 cputime=82.051 memavail=714956 print_time=423.532 buffer_time=5.632 print_stall=0 extruder: target=200 temp=199.7 pwm=0.513
Stats 1748.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=22954 bytes_read=91493 bytes_retransmit=9 bytes_invalid=0 send_seq=1691 receive_seq=1691 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=41.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.4  sysload=0.32 cputime=82.094 memavail=714956 print_time=423.532 buffer_time=4.628 print_stall=0 extruder: target=200 temp=199.6 pwm=0.584
Stats 1749.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=22988 bytes_read=91712 bytes_retransmit=9 bytes_invalid=0 send_seq=1694 receive_seq=1694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=41.7 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.6  sysload=0.32 cputime=82.138 memavail=714956 print_time=423.532 buffer_time=3.625 print_stall=0 extruder: target=200 temp=199.5 pwm=0.584
Stats 1750.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=23047 bytes_read=91913 bytes_retransmit=9 bytes_invalid=0 send_seq=1699 receive_seq=1699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=41.7 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.5  sysload=0.32 cputime=82.181 memavail=715576 print_time=423.532 buffer_time=2.622 print_stall=0 extruder: target=200 temp=199.3 pwm=0.650
Stats 1751.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=23088 bytes_read=92148 bytes_retransmit=9 bytes_invalid=0 send_seq=1702 receive_seq=1702 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=41.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.32 cputime=82.229 memavail=715072 print_time=423.532 buffer_time=1.616 print_stall=0 extruder: target=200 temp=199.3 pwm=0.650
Stats 1752.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=23122 bytes_read=92353 bytes_retransmit=9 bytes_invalid=0 send_seq=1705 receive_seq=1705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=41.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.30 cputime=82.270 memavail=715088 print_time=423.532 buffer_time=0.615 print_stall=0 extruder: target=200 temp=199.2 pwm=0.650
Stats 1753.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=23156 bytes_read=92544 bytes_retransmit=9 bytes_invalid=0 send_seq=1708 receive_seq=1708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=41.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.30 cputime=82.312 memavail=715340 print_time=423.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.650
Stats 1754.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=23473 bytes_read=92799 bytes_retransmit=9 bytes_invalid=0 send_seq=1719 receive_seq=1718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=41.6 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.30 cputime=82.365 memavail=715592 print_time=435.013 buffer_time=10.089 print_stall=0 extruder: target=200 temp=199.2 pwm=0.591
Stats 1755.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=23526 bytes_read=93009 bytes_retransmit=9 bytes_invalid=0 send_seq=1722 receive_seq=1722 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=41.6 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.4  sysload=0.30 cputime=82.407 memavail=715676 print_time=435.013 buffer_time=9.086 print_stall=0 extruder: target=200 temp=199.3 pwm=0.591
Stats 1756.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=23576 bytes_read=93205 bytes_retransmit=9 bytes_invalid=0 send_seq=1726 receive_seq=1726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=41.5 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.30 cputime=82.450 memavail=715556 print_time=435.013 buffer_time=8.082 print_stall=0 extruder: target=200 temp=199.4 pwm=0.529
Stats 1757.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000033 bytes_write=23610 bytes_read=93440 bytes_retransmit=9 bytes_invalid=0 send_seq=1729 receive_seq=1729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=41.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.51 cputime=82.495 memavail=716320 print_time=435.013 buffer_time=7.081 print_stall=0 extruder: target=200 temp=199.5 pwm=0.529
Stats 1758.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000033 bytes_write=23665 bytes_read=93655 bytes_retransmit=9 bytes_invalid=0 send_seq=1734 receive_seq=1734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=41.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.51 cputime=82.538 memavail=716320 print_time=435.013 buffer_time=6.078 print_stall=0 extruder: target=200 temp=199.7 pwm=0.529
Stats 1759.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000033 bytes_write=23734 bytes_read=93861 bytes_retransmit=9 bytes_invalid=0 send_seq=1740 receive_seq=1740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=41.5 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.51 cputime=82.582 memavail=716128 print_time=435.013 buffer_time=5.073 print_stall=0 extruder: target=200 temp=199.9 pwm=0.473
Stats 1760.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000033 bytes_write=23768 bytes_read=94081 bytes_retransmit=9 bytes_invalid=0 send_seq=1743 receive_seq=1743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=41.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.6  sysload=0.51 cputime=82.623 memavail=715652 print_time=435.013 buffer_time=4.070 print_stall=0 extruder: target=200 temp=199.9 pwm=0.473
Stats 1761.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000033 bytes_write=23802 bytes_read=94286 bytes_retransmit=9 bytes_invalid=0 send_seq=1746 receive_seq=1746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=41.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.51 cputime=82.665 memavail=715704 print_time=435.013 buffer_time=3.066 print_stall=0 extruder: target=200 temp=200.0 pwm=0.473
Stats 1762.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=23852 bytes_read=94497 bytes_retransmit=9 bytes_invalid=0 send_seq=1750 receive_seq=1750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=41.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.47 cputime=82.710 memavail=715452 print_time=435.013 buffer_time=2.062 print_stall=0 extruder: target=200 temp=200.0 pwm=0.526
Stats 1763.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=23886 bytes_read=94730 bytes_retransmit=9 bytes_invalid=0 send_seq=1753 receive_seq=1753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=41.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.47 cputime=82.753 memavail=715964 print_time=435.013 buffer_time=1.058 print_stall=0 extruder: target=200 temp=200.0 pwm=0.526
Stats 1764.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=23920 bytes_read=94911 bytes_retransmit=9 bytes_invalid=0 send_seq=1756 receive_seq=1756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=41.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.47 cputime=82.793 memavail=715956 print_time=435.013 buffer_time=0.056 print_stall=0 extruder: target=200 temp=199.9 pwm=0.526
Stats 1765.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=23979 bytes_read=95120 bytes_retransmit=9 bytes_invalid=0 send_seq=1761 receive_seq=1761 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=41.3 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.47 cputime=82.838 memavail=717028 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.584
Stats 1766.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=24032 bytes_read=95339 bytes_retransmit=9 bytes_invalid=0 send_seq=1764 receive_seq=1764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=41.3 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.47 cputime=82.879 memavail=716980 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.584
Stats 1767.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=24066 bytes_read=95545 bytes_retransmit=9 bytes_invalid=0 send_seq=1767 receive_seq=1767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=41.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.43 cputime=82.922 memavail=717044 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.584
Stats 1768.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=24100 bytes_read=95751 bytes_retransmit=9 bytes_invalid=0 send_seq=1770 receive_seq=1770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=41.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.43 cputime=82.964 memavail=717048 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.584
Stats 1769.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=24150 bytes_read=95975 bytes_retransmit=9 bytes_invalid=0 send_seq=1774 receive_seq=1774 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=41.1 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.7  sysload=0.43 cputime=83.006 memavail=717076 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.514
Stats 1770.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=24184 bytes_read=96166 bytes_retransmit=9 bytes_invalid=0 send_seq=1777 receive_seq=1777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=41.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.7  sysload=0.43 cputime=83.046 memavail=716880 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.514
Stats 1771.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=24218 bytes_read=96372 bytes_retransmit=9 bytes_invalid=0 send_seq=1780 receive_seq=1780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=41.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.43 cputime=83.087 memavail=717352 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.514
Stats 1772.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24268 bytes_read=96610 bytes_retransmit=9 bytes_invalid=0 send_seq=1784 receive_seq=1784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=41.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.7  sysload=0.40 cputime=83.131 memavail=717912 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.453
Stats 1773.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24302 bytes_read=96801 bytes_retransmit=9 bytes_invalid=0 send_seq=1787 receive_seq=1787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=41.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.40 cputime=83.173 memavail=717912 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.453
Stats 1774.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24352 bytes_read=97012 bytes_retransmit=9 bytes_invalid=0 send_seq=1791 receive_seq=1791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=41.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.40 cputime=83.218 memavail=717492 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.375
Stats 1775.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24421 bytes_read=97246 bytes_retransmit=9 bytes_invalid=0 send_seq=1797 receive_seq=1797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=41.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.40 cputime=83.261 memavail=717036 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.426
Stats 1776.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24455 bytes_read=97437 bytes_retransmit=9 bytes_invalid=0 send_seq=1800 receive_seq=1800 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=41.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.40 cputime=83.303 memavail=717288 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.426
Stats 1777.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=24489 bytes_read=97658 bytes_retransmit=9 bytes_invalid=0 send_seq=1803 receive_seq=1803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=41.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.37 cputime=83.346 memavail=716284 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.426
Stats 1778.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=24523 bytes_read=97877 bytes_retransmit=9 bytes_invalid=0 send_seq=1806 receive_seq=1806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=40.9 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.6  sysload=0.37 cputime=83.389 memavail=716540 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.426
Stats 1779.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=24573 bytes_read=98073 bytes_retransmit=9 bytes_invalid=0 send_seq=1810 receive_seq=1810 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.37 cputime=83.432 memavail=716136 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.436
Stats 1780.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=24607 bytes_read=98293 bytes_retransmit=9 bytes_invalid=0 send_seq=1813 receive_seq=1813 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.9 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.37 cputime=83.474 memavail=715936 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.436
Stats 1781.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24666 bytes_read=98522 bytes_retransmit=9 bytes_invalid=0 send_seq=1818 receive_seq=1818 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=40.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.37 cputime=83.518 memavail=714932 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.497
Stats 1782.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24705 bytes_read=98713 bytes_retransmit=9 bytes_invalid=0 send_seq=1821 receive_seq=1821 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.34 cputime=83.560 memavail=715184 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.497
Stats 1783.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24739 bytes_read=98933 bytes_retransmit=9 bytes_invalid=0 send_seq=1824 receive_seq=1824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.34 cputime=83.606 memavail=714472 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.497
Stats 1784.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24773 bytes_read=99138 bytes_retransmit=9 bytes_invalid=0 send_seq=1827 receive_seq=1827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.34 cputime=83.647 memavail=715720 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.497
Stats 1785.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=24807 bytes_read=99329 bytes_retransmit=9 bytes_invalid=0 send_seq=1830 receive_seq=1830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.34 cputime=83.689 memavail=714744 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.497
Stats 1786.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=24857 bytes_read=99569 bytes_retransmit=9 bytes_invalid=0 send_seq=1834 receive_seq=1834 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=40.7 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.34 cputime=83.731 memavail=714516 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.487
Stats 1787.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=24891 bytes_read=99774 bytes_retransmit=9 bytes_invalid=0 send_seq=1837 receive_seq=1837 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.31 cputime=83.773 memavail=714728 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.487
Stats 1788.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=24931 bytes_read=99965 bytes_retransmit=9 bytes_invalid=0 send_seq=1841 receive_seq=1840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=40.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.31 cputime=83.815 memavail=715308 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.487
Stats 1789.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=24965 bytes_read=100195 bytes_retransmit=9 bytes_invalid=0 send_seq=1844 receive_seq=1844 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.31 cputime=83.857 memavail=714412 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.487
Stats 1790.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25015 bytes_read=100394 bytes_retransmit=9 bytes_invalid=0 send_seq=1848 receive_seq=1848 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=40.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.6  sysload=0.31 cputime=83.899 memavail=713912 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1791.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25049 bytes_read=100585 bytes_retransmit=9 bytes_invalid=0 send_seq=1851 receive_seq=1851 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=40.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.31 cputime=83.941 memavail=714168 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1792.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25083 bytes_read=100833 bytes_retransmit=9 bytes_invalid=0 send_seq=1854 receive_seq=1854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=40.5 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.28 cputime=83.984 memavail=714168 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.473
Stats 1793.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25117 bytes_read=101024 bytes_retransmit=9 bytes_invalid=0 send_seq=1857 receive_seq=1857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=40.5 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.8  sysload=0.28 cputime=84.026 memavail=713924 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.473
Stats 1794.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25181 bytes_read=101240 bytes_retransmit=9 bytes_invalid=0 send_seq=1862 receive_seq=1862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=40.5 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.28 cputime=84.070 memavail=713788 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.432
Stats 1795.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25215 bytes_read=101459 bytes_retransmit=9 bytes_invalid=0 send_seq=1865 receive_seq=1865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=40.5 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.5  sysload=0.28 cputime=84.111 memavail=713284 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.432
Stats 1796.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25249 bytes_read=101650 bytes_retransmit=9 bytes_invalid=0 send_seq=1868 receive_seq=1868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=40.4 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.28 cputime=84.152 memavail=713544 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.432
Stats 1797.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25283 bytes_read=101871 bytes_retransmit=9 bytes_invalid=0 send_seq=1871 receive_seq=1871 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=40.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.26 cputime=84.194 memavail=713796 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.432
Stats 1798.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25333 bytes_read=102095 bytes_retransmit=9 bytes_invalid=0 send_seq=1875 receive_seq=1875 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=40.4 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.6  sysload=0.26 cputime=84.237 memavail=714056 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 1799.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25367 bytes_read=102286 bytes_retransmit=9 bytes_invalid=0 send_seq=1878 receive_seq=1878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=40.4 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.26 cputime=84.279 memavail=716080 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 1800.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25401 bytes_read=102492 bytes_retransmit=9 bytes_invalid=0 send_seq=1881 receive_seq=1881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=40.3 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.5  sysload=0.26 cputime=84.315 memavail=715828 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 1801.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25435 bytes_read=102711 bytes_retransmit=9 bytes_invalid=0 send_seq=1884 receive_seq=1884 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=40.3 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.6  sysload=0.26 cputime=84.352 memavail=716136 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 1802.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25485 bytes_read=102921 bytes_retransmit=9 bytes_invalid=0 send_seq=1888 receive_seq=1888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=40.3 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.7  sysload=0.32 cputime=84.389 memavail=716388 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.492
Stats 1803.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25519 bytes_read=103127 bytes_retransmit=9 bytes_invalid=0 send_seq=1891 receive_seq=1891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.3 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.32 cputime=84.431 memavail=716600 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.492
Stats 1804.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25553 bytes_read=103346 bytes_retransmit=9 bytes_invalid=0 send_seq=1894 receive_seq=1894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=40.2 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.8  sysload=0.32 cputime=84.469 memavail=716228 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.492
Stats 1805.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25587 bytes_read=103537 bytes_retransmit=9 bytes_invalid=0 send_seq=1897 receive_seq=1897 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=40.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.32 cputime=84.505 memavail=716620 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.492
Stats 1806.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25621 bytes_read=103743 bytes_retransmit=9 bytes_invalid=0 send_seq=1900 receive_seq=1900 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.2 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.32 cputime=84.541 memavail=716620 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.492
Stats 1807.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25671 bytes_read=103981 bytes_retransmit=9 bytes_invalid=0 send_seq=1904 receive_seq=1904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.2 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.54 cputime=84.578 memavail=716624 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.494
Stats 1808.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25705 bytes_read=104172 bytes_retransmit=9 bytes_invalid=0 send_seq=1907 receive_seq=1907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=40.1 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.54 cputime=84.614 memavail=715884 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.494
Stats 1809.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25739 bytes_read=104378 bytes_retransmit=9 bytes_invalid=0 send_seq=1910 receive_seq=1910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=40.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.54 cputime=84.650 memavail=716744 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.494
Stats 1810.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25773 bytes_read=104597 bytes_retransmit=9 bytes_invalid=0 send_seq=1913 receive_seq=1913 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=40.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.54 cputime=84.687 memavail=716492 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.494
Stats 1811.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25823 bytes_read=104793 bytes_retransmit=9 bytes_invalid=0 send_seq=1917 receive_seq=1917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=40.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.54 cputime=84.722 memavail=717016 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.478
Stats 1812.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25857 bytes_read=105013 bytes_retransmit=9 bytes_invalid=0 send_seq=1920 receive_seq=1920 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=40.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.49 cputime=84.758 memavail=716892 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1813.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25891 bytes_read=105232 bytes_retransmit=9 bytes_invalid=0 send_seq=1923 receive_seq=1923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=40.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.5  sysload=0.49 cputime=84.794 memavail=716408 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1814.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25925 bytes_read=105423 bytes_retransmit=9 bytes_invalid=0 send_seq=1926 receive_seq=1926 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=39.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.49 cputime=84.830 memavail=716288 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1815.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=25975 bytes_read=105623 bytes_retransmit=9 bytes_invalid=0 send_seq=1930 receive_seq=1930 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=40.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.6  sysload=0.49 cputime=84.866 memavail=717076 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1816.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26009 bytes_read=105836 bytes_retransmit=9 bytes_invalid=0 send_seq=1933 receive_seq=1933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=40.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.49 cputime=84.902 memavail=716600 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1817.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26043 bytes_read=106041 bytes_retransmit=9 bytes_invalid=0 send_seq=1936 receive_seq=1936 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=39.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.45 cputime=84.939 memavail=716860 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1818.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26077 bytes_read=106261 bytes_retransmit=9 bytes_invalid=0 send_seq=1939 receive_seq=1939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=39.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.45 cputime=84.976 memavail=716304 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.443
Stats 1819.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26127 bytes_read=106471 bytes_retransmit=9 bytes_invalid=0 send_seq=1943 receive_seq=1943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=39.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.45 cputime=85.014 memavail=715972 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 1820.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26161 bytes_read=106662 bytes_retransmit=9 bytes_invalid=0 send_seq=1946 receive_seq=1946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=39.9 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.6  sysload=0.45 cputime=85.050 memavail=716244 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 1821.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26195 bytes_read=106882 bytes_retransmit=9 bytes_invalid=0 send_seq=1949 receive_seq=1949 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=39.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.45 cputime=85.086 memavail=716244 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.477
Stats 1822.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26229 bytes_read=107101 bytes_retransmit=9 bytes_invalid=0 send_seq=1952 receive_seq=1952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=39.8 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.6  sysload=0.42 cputime=85.123 memavail=715996 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.477
Stats 1823.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26279 bytes_read=107297 bytes_retransmit=9 bytes_invalid=0 send_seq=1956 receive_seq=1956 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=39.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.42 cputime=85.160 memavail=715444 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.476
Stats 1824.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26313 bytes_read=107517 bytes_retransmit=9 bytes_invalid=0 send_seq=1959 receive_seq=1959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=39.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.42 cputime=85.196 memavail=714120 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.476
Stats 1825.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26347 bytes_read=107722 bytes_retransmit=9 bytes_invalid=0 send_seq=1962 receive_seq=1962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=39.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.42 cputime=85.233 memavail=714932 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.476
Stats 1826.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26381 bytes_read=107913 bytes_retransmit=9 bytes_invalid=0 send_seq=1965 receive_seq=1965 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=39.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.42 cputime=85.270 memavail=714960 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.476
Stats 1827.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26415 bytes_read=108147 bytes_retransmit=9 bytes_invalid=0 send_seq=1968 receive_seq=1968 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=39.7 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.38 cputime=85.306 memavail=714960 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.476
Stats 1828.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26465 bytes_read=108357 bytes_retransmit=9 bytes_invalid=0 send_seq=1972 receive_seq=1972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=39.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.7  sysload=0.38 cputime=85.343 memavail=714960 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 1829.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26499 bytes_read=108548 bytes_retransmit=9 bytes_invalid=0 send_seq=1975 receive_seq=1975 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=39.6 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.38 cputime=85.379 memavail=714112 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 1830.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26533 bytes_read=108768 bytes_retransmit=9 bytes_invalid=0 send_seq=1978 receive_seq=1978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=39.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.6  sysload=0.38 cputime=85.415 memavail=714112 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 1831.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26567 bytes_read=108973 bytes_retransmit=9 bytes_invalid=0 send_seq=1981 receive_seq=1981 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=39.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.4  sysload=0.38 cputime=85.450 memavail=713860 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 1832.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26612 bytes_read=109178 bytes_retransmit=9 bytes_invalid=0 send_seq=1984 receive_seq=1984 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=39.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.35 cputime=85.486 memavail=713888 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 1833.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26646 bytes_read=109398 bytes_retransmit=9 bytes_invalid=0 send_seq=1987 receive_seq=1987 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=39.5 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.35 cputime=85.522 memavail=713888 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 1834.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26680 bytes_read=109603 bytes_retransmit=9 bytes_invalid=0 send_seq=1990 receive_seq=1990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=39.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.35 cputime=85.564 memavail=713436 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.480
Stats 1835.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26735 bytes_read=109804 bytes_retransmit=9 bytes_invalid=0 send_seq=1995 receive_seq=1995 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=39.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.35 cputime=85.603 memavail=713436 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.480
Stats 1836.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=26785 bytes_read=110029 bytes_retransmit=9 bytes_invalid=0 send_seq=1999 receive_seq=1999 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=39.4 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.35 cputime=85.639 memavail=713716 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 1837.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=26835 bytes_read=110254 bytes_retransmit=9 bytes_invalid=0 send_seq=2003 receive_seq=2003 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=39.4 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.4  sysload=0.72 cputime=85.676 memavail=713996 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.536
Stats 1838.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=26885 bytes_read=110450 bytes_retransmit=9 bytes_invalid=0 send_seq=2007 receive_seq=2007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=39.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.72 cputime=85.712 memavail=713996 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.485
Stats 1839.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=26919 bytes_read=110670 bytes_retransmit=9 bytes_invalid=0 send_seq=2010 receive_seq=2010 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=39.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.72 cputime=85.753 memavail=714792 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.485
Stats 1840.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=26953 bytes_read=110869 bytes_retransmit=9 bytes_invalid=0 send_seq=2013 receive_seq=2013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=39.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.72 cputime=85.789 memavail=714792 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 1841.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=26987 bytes_read=111050 bytes_retransmit=9 bytes_invalid=0 send_seq=2016 receive_seq=2016 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=39.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.72 cputime=85.825 memavail=715304 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.485
Stats 1842.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27037 bytes_read=111286 bytes_retransmit=9 bytes_invalid=0 send_seq=2020 receive_seq=2020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=39.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.5  sysload=0.67 cputime=85.863 memavail=715516 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 1843.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27071 bytes_read=111491 bytes_retransmit=9 bytes_invalid=0 send_seq=2023 receive_seq=2023 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=39.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.67 cputime=85.900 memavail=715900 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 1844.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27105 bytes_read=111682 bytes_retransmit=9 bytes_invalid=0 send_seq=2026 receive_seq=2026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=39.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.67 cputime=85.939 memavail=715832 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1845.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27139 bytes_read=111916 bytes_retransmit=9 bytes_invalid=0 send_seq=2029 receive_seq=2029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=39.2 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.7  sysload=0.67 cputime=85.977 memavail=715836 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 1846.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27195 bytes_read=112128 bytes_retransmit=9 bytes_invalid=0 send_seq=2034 receive_seq=2034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=39.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.8  sysload=0.67 cputime=86.013 memavail=716088 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 1847.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27229 bytes_read=112333 bytes_retransmit=9 bytes_invalid=0 send_seq=2037 receive_seq=2037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=39.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.61 cputime=86.049 memavail=716348 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 1848.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27263 bytes_read=112567 bytes_retransmit=9 bytes_invalid=0 send_seq=2040 receive_seq=2040 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=39.1 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.61 cputime=86.089 memavail=716348 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 1849.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27297 bytes_read=112758 bytes_retransmit=9 bytes_invalid=0 send_seq=2043 receive_seq=2043 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=39.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.61 cputime=86.125 memavail=717280 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.460
Stats 1850.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27347 bytes_read=112954 bytes_retransmit=9 bytes_invalid=0 send_seq=2047 receive_seq=2047 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=39.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.61 cputime=86.161 memavail=717892 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 1851.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27381 bytes_read=113188 bytes_retransmit=9 bytes_invalid=0 send_seq=2050 receive_seq=2050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=39.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.8  sysload=0.61 cputime=86.198 memavail=718144 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 1852.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27415 bytes_read=113393 bytes_retransmit=9 bytes_invalid=0 send_seq=2053 receive_seq=2053 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=39.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.56 cputime=86.236 memavail=718596 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 1853.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27449 bytes_read=113599 bytes_retransmit=9 bytes_invalid=0 send_seq=2056 receive_seq=2056 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=39.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.56 cputime=86.273 memavail=718900 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 1854.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27483 bytes_read=113818 bytes_retransmit=9 bytes_invalid=0 send_seq=2059 receive_seq=2059 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=39.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.56 cputime=86.312 memavail=720168 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1855.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27528 bytes_read=114009 bytes_retransmit=9 bytes_invalid=0 send_seq=2062 receive_seq=2062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=39.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.56 cputime=86.349 memavail=719700 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1856.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27562 bytes_read=114215 bytes_retransmit=9 bytes_invalid=0 send_seq=2065 receive_seq=2065 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=38.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.56 cputime=86.386 memavail=719952 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1857.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27596 bytes_read=114448 bytes_retransmit=9 bytes_invalid=0 send_seq=2068 receive_seq=2068 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=38.9 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=31.6  sysload=0.52 cputime=86.424 memavail=720204 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1858.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27630 bytes_read=114639 bytes_retransmit=9 bytes_invalid=0 send_seq=2071 receive_seq=2071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=0 temp=38.9 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.52 cputime=86.458 memavail=720208 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.478
Stats 1859.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27680 bytes_read=114850 bytes_retransmit=9 bytes_invalid=0 send_seq=2075 receive_seq=2075 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=38.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.52 cputime=86.497 memavail=721028 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.470
Stats 1860.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27714 bytes_read=115069 bytes_retransmit=9 bytes_invalid=0 send_seq=2078 receive_seq=2078 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=38.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.52 cputime=86.535 memavail=720528 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 1861.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27748 bytes_read=115260 bytes_retransmit=9 bytes_invalid=0 send_seq=2081 receive_seq=2081 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=38.8 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.8  sysload=0.52 cputime=86.570 memavail=720724 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 1862.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27782 bytes_read=115480 bytes_retransmit=9 bytes_invalid=0 send_seq=2084 receive_seq=2084 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=38.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.48 cputime=86.606 memavail=720528 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 1863.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27832 bytes_read=115704 bytes_retransmit=9 bytes_invalid=0 send_seq=2088 receive_seq=2088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=38.8 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.48 cputime=86.644 memavail=720032 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 1864.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27866 bytes_read=115895 bytes_retransmit=9 bytes_invalid=0 send_seq=2091 receive_seq=2091 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=38.7 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.48 cputime=86.680 memavail=719372 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 1865.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27900 bytes_read=116101 bytes_retransmit=9 bytes_invalid=0 send_seq=2094 receive_seq=2094 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=0 temp=38.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.48 cputime=86.716 memavail=719120 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 1866.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27934 bytes_read=116308 bytes_retransmit=9 bytes_invalid=0 send_seq=2097 receive_seq=2097 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=38.7 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.4  sysload=0.48 cputime=86.752 memavail=719624 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 1867.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=27984 bytes_read=116511 bytes_retransmit=9 bytes_invalid=0 send_seq=2101 receive_seq=2101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=38.7 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.44 cputime=86.789 memavail=719624 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.454
Stats 1868.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28018 bytes_read=116717 bytes_retransmit=9 bytes_invalid=0 send_seq=2104 receive_seq=2104 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=0 temp=38.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.7  sysload=0.44 cputime=86.825 memavail=719372 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.454
Stats 1869.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28052 bytes_read=116936 bytes_retransmit=9 bytes_invalid=0 send_seq=2107 receive_seq=2107 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=38.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.44 cputime=86.865 memavail=717492 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.454
Stats 1870.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28086 bytes_read=117127 bytes_retransmit=9 bytes_invalid=0 send_seq=2110 receive_seq=2110 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=38.6 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.44 cputime=86.900 memavail=718708 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.454
Stats 1871.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28136 bytes_read=117338 bytes_retransmit=9 bytes_invalid=0 send_seq=2114 receive_seq=2114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=38.6 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.5  sysload=0.44 cputime=86.937 memavail=718008 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1872.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28170 bytes_read=117571 bytes_retransmit=9 bytes_invalid=0 send_seq=2117 receive_seq=2117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=38.6 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.7  sysload=0.40 cputime=86.975 memavail=718008 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1873.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28204 bytes_read=117762 bytes_retransmit=9 bytes_invalid=0 send_seq=2120 receive_seq=2120 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=38.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.40 cputime=87.010 memavail=718264 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1874.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28238 bytes_read=117968 bytes_retransmit=9 bytes_invalid=0 send_seq=2123 receive_seq=2123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=38.5 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.40 cputime=87.046 memavail=716384 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.507
Stats 1875.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28288 bytes_read=118192 bytes_retransmit=9 bytes_invalid=0 send_seq=2127 receive_seq=2127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=38.5 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.40 cputime=87.083 memavail=717396 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.496
Stats 1876.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28322 bytes_read=118383 bytes_retransmit=9 bytes_invalid=0 send_seq=2130 receive_seq=2130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=0 temp=38.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.6  sysload=0.40 cputime=87.118 memavail=717396 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.496
Stats 1877.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28375 bytes_read=118613 bytes_retransmit=9 bytes_invalid=0 send_seq=2135 receive_seq=2135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=38.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.37 cputime=87.155 memavail=716940 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.496
Stats 1878.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28409 bytes_read=118832 bytes_retransmit=9 bytes_invalid=0 send_seq=2138 receive_seq=2138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=38.4 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.7  sysload=0.37 cputime=87.192 memavail=716516 print_time=435.013 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.496
Stats 1879.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=28521 bytes_read=119043 bytes_retransmit=9 bytes_invalid=0 send_seq=2145 receive_seq=2145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=38.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.7  sysload=0.37 cputime=87.238 memavail=716252 print_time=550.400 buffer_time=0.202 print_stall=0 extruder: target=0 temp=200.1 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473035586768: Disconnected
Restarting printer
Start printer at Fri May 19 01:39:06 2023 (1684460346.0 1880.7)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473035510400: New connection
webhooks client 281473035510400: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 1884.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=4721 bytes_read=6067 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=256 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=507 upcoming_bytes=50 freq=168089894 heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=46.2 mcu_temp: temp=0.0  sysload=0.50 cputime=90.208 memavail=714672 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473035510400
webhooks: registering remote method 'reboot_machine' for connection id: 281473035510400
webhooks: registering remote method 'pause_job_queue' for connection id: 281473035510400
webhooks: registering remote method 'start_job_queue' for connection id: 281473035510400
Stats 1885.3: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5347 bytes_read=6316 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=168020826 heater_bed: target=0 temp=38.3 pwm=0.000 raspberry_pi: temp=45.1 mcu_temp: temp=31.5  sysload=0.50 cputime=90.264 memavail=716108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.1 pwm=0.000
Stats 1886.3: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5402 bytes_read=6476 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=168002249 heater_bed: target=0 temp=38.2 pwm=0.000 raspberry_pi: temp=45.8 mcu_temp: temp=31.5  sysload=0.50 cputime=90.313 memavail=715860 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.4 pwm=0.000
Stats 1887.3: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5427 bytes_read=6646 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=38.3 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.4  sysload=0.46 cputime=90.344 memavail=715860 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.6 pwm=0.000
Stats 1888.3: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5433 bytes_read=6819 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996279 heater_bed: target=0 temp=38.2 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.46 cputime=90.375 memavail=715808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.5 pwm=0.000
Stats 1889.3: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000203 bytes_write=5458 bytes_read=6974 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996112 heater_bed: target=0 temp=38.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.4  sysload=0.46 cputime=90.406 memavail=714860 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.7 pwm=0.000
Stats 1890.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=5483 bytes_read=7159 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996049 heater_bed: target=0 temp=38.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.46 cputime=90.438 memavail=714852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.7 pwm=0.000
Heater extruder approaching new target of 200.000
Stats 1891.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=5632 bytes_read=7362 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996017 heater_bed: target=0 temp=38.1 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.4  sysload=0.46 cputime=90.477 memavail=714908 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.5 pwm=1.000
Stats 1892.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=5691 bytes_read=7527 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996103 heater_bed: target=0 temp=38.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.42 cputime=90.509 memavail=714908 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.6 pwm=1.000
Stats 1893.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=5716 bytes_read=7697 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996235 heater_bed: target=0 temp=38.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.42 cputime=90.541 memavail=714776 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.9 pwm=1.000
Stats 1894.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=5741 bytes_read=7880 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996291 heater_bed: target=0 temp=38.1 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.4  sysload=0.42 cputime=90.574 memavail=714752 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.2 pwm=1.000
Stats 1895.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000076 bytes_write=5782 bytes_read=8055 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996348 heater_bed: target=0 temp=38.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.42 cputime=90.607 memavail=715120 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.0 pwm=1.000
Stats 1896.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000076 bytes_write=5788 bytes_read=8215 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996379 heater_bed: target=0 temp=38.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.42 cputime=90.637 memavail=715196 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.0 pwm=1.000
Stats 1897.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000076 bytes_write=5794 bytes_read=8388 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996425 heater_bed: target=0 temp=38.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.39 cputime=90.669 memavail=715928 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.3 pwm=1.000
Stats 1898.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000076 bytes_write=5816 bytes_read=8538 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996493 heater_bed: target=0 temp=38.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.39 cputime=90.701 memavail=715744 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.9 pwm=0.949
Stats 1899.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000076 bytes_write=5873 bytes_read=8718 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996518 heater_bed: target=0 temp=38.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.4  sysload=0.39 cputime=90.734 memavail=715240 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.6 pwm=0.829
Stats 1900.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=5914 bytes_read=8921 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996529 heater_bed: target=0 temp=37.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.39 cputime=90.771 memavail=716940 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.6 pwm=0.715
Stats 1901.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=5947 bytes_read=9071 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996557 heater_bed: target=0 temp=37.9 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.4  sysload=0.39 cputime=90.802 memavail=716940 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.4 pwm=0.659
Stats 1902.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=5988 bytes_read=9246 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996536 heater_bed: target=0 temp=37.9 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.36 cputime=90.833 memavail=716968 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.2 pwm=0.589
Stats 1903.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=6029 bytes_read=9434 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996540 heater_bed: target=0 temp=37.9 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.36 cputime=90.866 memavail=716716 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.3 pwm=0.506
Heater extruder within range of 200.000
Stats 1904.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=6070 bytes_read=9594 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996546 heater_bed: target=0 temp=37.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.36 cputime=90.899 memavail=716716 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.1 pwm=0.441
Stats 1905.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=6090 bytes_read=9767 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=0 temp=37.8 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.36 cputime=90.933 memavail=716612 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.7 pwm=0.441
Stats 1906.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=6115 bytes_read=9940 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=0 temp=37.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.36 cputime=90.965 memavail=716364 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.4 pwm=0.441
Stats 1907.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=6121 bytes_read=10085 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=0 temp=37.8 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.33 cputime=90.995 memavail=716368 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.9 pwm=0.441
Stats 1908.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=6146 bytes_read=10255 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=0 temp=37.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.3  sysload=0.33 cputime=91.026 memavail=716360 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.2 pwm=0.441
Stats 1909.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=6253 bytes_read=10448 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996653 heater_bed: target=0 temp=37.7 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.4  sysload=0.33 cputime=91.060 memavail=715648 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.6 pwm=0.467
Stats 1910.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000066 bytes_write=6259 bytes_read=10608 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996665 heater_bed: target=0 temp=37.7 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.4  sysload=0.33 cputime=91.090 memavail=716200 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.8 pwm=0.467
Stats 1911.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000066 bytes_write=6285 bytes_read=10778 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996672 heater_bed: target=0 temp=37.7 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.33 cputime=91.121 memavail=716160 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.0 pwm=0.467
Stats 1912.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000066 bytes_write=6307 bytes_read=10956 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996692 heater_bed: target=0 temp=37.7 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.30 cputime=91.153 memavail=716200 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.524
Stats 1913.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000066 bytes_write=6313 bytes_read=11101 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996708 heater_bed: target=0 temp=37.7 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.3  sysload=0.30 cputime=91.183 memavail=716204 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.524
Stats 1914.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000066 bytes_write=6319 bytes_read=11261 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996716 heater_bed: target=0 temp=37.7 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.30 cputime=91.214 memavail=716456 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.524
Stats 1915.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6325 bytes_read=11448 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996729 heater_bed: target=0 temp=37.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.30 cputime=91.246 memavail=717136 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.524
Stats 1916.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6347 bytes_read=11598 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996741 heater_bed: target=0 temp=37.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.30 cputime=91.276 memavail=716936 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.529
Stats 1917.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6353 bytes_read=11758 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996746 heater_bed: target=0 temp=37.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.28 cputime=91.307 memavail=716936 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.529
Stats 1918.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6396 bytes_read=11946 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996753 heater_bed: target=0 temp=37.5 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.28 cputime=91.340 memavail=716688 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.477
Stats 1919.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=6408 bytes_read=12107 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996765 heater_bed: target=0 temp=37.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.28 cputime=91.371 memavail=716940 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.477
Stats 1920.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=6414 bytes_read=12282 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996771 heater_bed: target=0 temp=37.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.28 cputime=91.403 memavail=717384 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.477
Stats 1921.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=6420 bytes_read=12455 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996774 heater_bed: target=0 temp=37.5 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.3  sysload=0.28 cputime=91.435 memavail=717384 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.477
Stats 1922.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=6442 bytes_read=12605 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996781 heater_bed: target=0 temp=37.5 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.3  sysload=0.42 cputime=91.467 memavail=717384 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 1923.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=6448 bytes_read=12765 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996784 heater_bed: target=0 temp=37.5 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.5  sysload=0.42 cputime=91.498 memavail=717388 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.462
Stats 1924.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=6473 bytes_read=12948 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996794 heater_bed: target=0 temp=37.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.42 cputime=91.531 memavail=717892 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.462
Stats 1925.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6479 bytes_read=13107 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996796 heater_bed: target=0 temp=37.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.1  sysload=0.42 cputime=91.563 memavail=718008 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.462
Stats 1926.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6501 bytes_read=13272 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996799 heater_bed: target=0 temp=37.4 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.4  sysload=0.42 cputime=91.595 memavail=717756 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.457
Stats 1927.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6507 bytes_read=13445 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996805 heater_bed: target=0 temp=37.4 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.38 cputime=91.628 memavail=718580 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.457
Stats 1928.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6513 bytes_read=13590 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996804 heater_bed: target=0 temp=37.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.1  sysload=0.38 cputime=91.659 memavail=718832 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.457
Stats 1929.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=6519 bytes_read=13750 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996807 heater_bed: target=0 temp=37.4 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.2  sysload=0.38 cputime=91.693 memavail=718580 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.457
Stats 1930.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6525 bytes_read=13934 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996813 heater_bed: target=0 temp=37.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.4  sysload=0.38 cputime=91.726 memavail=717392 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.466
Stats 1931.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6547 bytes_read=14074 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996814 heater_bed: target=0 temp=37.3 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.38 cputime=91.758 memavail=717404 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.466
Stats 1932.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6553 bytes_read=14229 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996815 heater_bed: target=0 temp=37.3 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.35 cputime=91.789 memavail=717456 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.466
Stats 1933.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=6559 bytes_read=14402 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996816 heater_bed: target=0 temp=37.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=31.2  sysload=0.35 cputime=91.821 memavail=716900 print_time=11.155 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.466
Stats 1934.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7141 bytes_read=14911 bytes_retransmit=9 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996817 heater_bed: target=0 temp=37.2 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.2  sysload=0.35 cputime=91.904 memavail=716952 print_time=63.983 buffer_time=9.391 print_stall=0 extruder: target=200 temp=200.2 pwm=0.466
Stats 1935.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7191 bytes_read=15137 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996820 heater_bed: target=0 temp=37.2 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.35 cputime=91.944 memavail=716400 print_time=63.983 buffer_time=8.391 print_stall=0 extruder: target=200 temp=200.2 pwm=0.454
Stats 1936.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7225 bytes_read=15356 bytes_retransmit=9 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996828 heater_bed: target=0 temp=37.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.1  sysload=0.35 cputime=91.982 memavail=716712 print_time=63.983 buffer_time=7.390 print_stall=0 extruder: target=200 temp=200.1 pwm=0.454
Stats 1937.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7259 bytes_read=15547 bytes_retransmit=9 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=37.2 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.2  sysload=0.32 cputime=92.018 memavail=716460 print_time=63.983 buffer_time=6.389 print_stall=0 extruder: target=200 temp=200.1 pwm=0.454
Stats 1938.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7309 bytes_read=15758 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=37.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.32 cputime=92.056 memavail=715960 print_time=63.983 buffer_time=5.388 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 1939.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=7354 bytes_read=15977 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=37.1 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.3  sysload=0.32 cputime=92.094 memavail=716216 print_time=63.983 buffer_time=4.388 print_stall=0 extruder: target=200 temp=199.8 pwm=0.582
Stats 1940.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7388 bytes_read=16182 bytes_retransmit=9 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=37.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.32 cputime=92.130 memavail=717444 print_time=63.983 buffer_time=3.387 print_stall=0 extruder: target=200 temp=199.6 pwm=0.582
Stats 1941.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7438 bytes_read=16393 bytes_retransmit=9 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996854 heater_bed: target=0 temp=37.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.32 cputime=92.173 memavail=716984 print_time=63.983 buffer_time=2.386 print_stall=0 extruder: target=200 temp=199.5 pwm=0.633
Stats 1942.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7493 bytes_read=16622 bytes_retransmit=9 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=37.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.0  sysload=0.38 cputime=92.212 memavail=716736 print_time=63.983 buffer_time=1.385 print_stall=0 extruder: target=200 temp=199.2 pwm=0.633
Stats 1943.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7527 bytes_read=16813 bytes_retransmit=9 bytes_invalid=0 send_seq=452 receive_seq=452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=37.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.1  sysload=0.38 cputime=92.249 memavail=716736 print_time=63.983 buffer_time=0.384 print_stall=0 extruder: target=200 temp=199.1 pwm=0.633
Stats 1944.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=7561 bytes_read=17019 bytes_retransmit=9 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=37.0 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.38 cputime=92.287 memavail=716484 print_time=63.983 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.633
Stats 1945.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=7628 bytes_read=17263 bytes_retransmit=9 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=37.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.38 cputime=92.328 memavail=716512 print_time=63.983 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.631
Stats 1946.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=7913 bytes_read=17479 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996852 heater_bed: target=0 temp=36.9 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.1  sysload=0.38 cputime=92.373 memavail=715768 print_time=76.817 buffer_time=10.218 print_stall=0 extruder: target=200 temp=199.2 pwm=0.568
Stats 1947.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=7987 bytes_read=17695 bytes_retransmit=9 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 heater_bed: target=0 temp=37.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.51 cputime=92.412 memavail=716296 print_time=76.817 buffer_time=9.217 print_stall=0 extruder: target=200 temp=199.3 pwm=0.568
Stats 1948.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=8037 bytes_read=17914 bytes_retransmit=9 bytes_invalid=0 send_seq=477 receive_seq=476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996859 heater_bed: target=0 temp=36.9 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.2  sysload=0.51 cputime=92.450 memavail=716244 print_time=76.817 buffer_time=8.216 print_stall=0 extruder: target=200 temp=199.5 pwm=0.516
Stats 1949.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=8071 bytes_read=18110 bytes_retransmit=9 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=36.9 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.51 cputime=92.486 memavail=716800 print_time=76.817 buffer_time=7.215 print_stall=0 extruder: target=200 temp=199.7 pwm=0.516
Stats 1950.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=8137 bytes_read=18341 bytes_retransmit=9 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996868 heater_bed: target=0 temp=36.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.2  sysload=0.51 cputime=92.526 memavail=716552 print_time=76.817 buffer_time=6.214 print_stall=0 extruder: target=200 temp=199.8 pwm=0.465
Stats 1951.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=8187 bytes_read=18565 bytes_retransmit=9 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=36.9 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.2  sysload=0.51 cputime=92.569 memavail=716584 print_time=76.817 buffer_time=5.213 print_stall=0 extruder: target=200 temp=199.9 pwm=0.520
Stats 1952.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=8221 bytes_read=18756 bytes_retransmit=9 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996869 heater_bed: target=0 temp=36.9 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.1  sysload=0.47 cputime=92.606 memavail=716836 print_time=76.817 buffer_time=4.213 print_stall=0 extruder: target=200 temp=199.9 pwm=0.520
Stats 1953.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=8255 bytes_read=18962 bytes_retransmit=9 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=36.8 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.3  sysload=0.47 cputime=92.643 memavail=716836 print_time=76.817 buffer_time=3.212 print_stall=0 extruder: target=200 temp=200.0 pwm=0.520
Stats 1954.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=8305 bytes_read=19186 bytes_retransmit=9 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=36.8 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=31.2  sysload=0.47 cputime=92.683 memavail=717592 print_time=76.817 buffer_time=2.211 print_stall=0 extruder: target=200 temp=199.9 pwm=0.572
Stats 1955.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8339 bytes_read=19391 bytes_retransmit=9 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=36.8 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.2  sysload=0.47 cputime=92.721 memavail=715736 print_time=76.817 buffer_time=1.211 print_stall=0 extruder: target=200 temp=199.9 pwm=0.572
Stats 1956.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8373 bytes_read=19591 bytes_retransmit=9 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=36.8 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=31.4  sysload=0.47 cputime=92.760 memavail=715524 print_time=76.817 buffer_time=0.211 print_stall=0 extruder: target=200 temp=199.9 pwm=0.572
Stats 1957.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8407 bytes_read=19798 bytes_retransmit=9 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=36.7 pwm=0.000 raspberry_pi: temp=44.7 mcu_temp: temp=31.3  sysload=0.43 cputime=92.800 memavail=715524 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.572
Stats 1958.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8490 bytes_read=20004 bytes_retransmit=9 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=36.7 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.2  sysload=0.43 cputime=92.839 memavail=714972 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.580
Stats 1959.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8524 bytes_read=20224 bytes_retransmit=9 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=36.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.43 cputime=92.877 memavail=715028 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.580
Stats 1960.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8558 bytes_read=20429 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=36.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.1  sysload=0.43 cputime=92.917 memavail=714096 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.580
Stats 1961.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=8608 bytes_read=20640 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=36.7 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.1  sysload=0.43 cputime=92.955 memavail=714180 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.510
Stats 1962.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=8642 bytes_read=20860 bytes_retransmit=9 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=0 temp=36.7 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.0  sysload=0.39 cputime=92.994 memavail=714432 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.510
Stats 1963.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=8692 bytes_read=21070 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=0 temp=36.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.3  sysload=0.39 cputime=93.033 memavail=714940 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.438
Stats 1964.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=8726 bytes_read=21261 bytes_retransmit=9 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=0 temp=36.7 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.2  sysload=0.39 cputime=93.071 memavail=714940 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.438
Stats 1965.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=8760 bytes_read=21481 bytes_retransmit=9 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996888 heater_bed: target=0 temp=36.6 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.2  sysload=0.39 cputime=93.110 memavail=714480 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.438
Stats 1966.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8794 bytes_read=21700 bytes_retransmit=9 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=0 temp=36.6 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.2  sysload=0.39 cputime=93.151 memavail=714488 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.438
Stats 1967.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8847 bytes_read=21901 bytes_retransmit=9 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=36.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.0  sysload=0.36 cputime=93.189 memavail=714488 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.438
Stats 1968.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8897 bytes_read=22126 bytes_retransmit=9 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=0 temp=36.6 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.36 cputime=93.227 memavail=714520 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.410
Stats 1969.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8931 bytes_read=22331 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=36.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.36 cputime=93.264 memavail=714792 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.410
Stats 1970.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=8965 bytes_read=22522 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=36.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.3  sysload=0.36 cputime=93.297 memavail=713408 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.410
Stats 1971.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9018 bytes_read=22767 bytes_retransmit=9 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=0 temp=36.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.36 cputime=93.337 memavail=713620 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.410
Stats 1972.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9068 bytes_read=22977 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=0 temp=36.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=31.2  sysload=0.41 cputime=93.375 memavail=713956 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.444
Stats 1973.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9113 bytes_read=23168 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=0 temp=36.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.41 cputime=93.411 memavail=713904 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.509
Stats 1974.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9166 bytes_read=23398 bytes_retransmit=9 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=0 temp=36.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.41 cputime=93.448 memavail=714516 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.509
Stats 1975.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9200 bytes_read=23603 bytes_retransmit=9 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=0 temp=36.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.41 cputime=93.485 memavail=714224 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.509
Stats 1976.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9234 bytes_read=23809 bytes_retransmit=9 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=0 temp=36.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.4  sysload=0.41 cputime=93.522 memavail=714680 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.509
Stats 1977.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9284 bytes_read=24034 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=36.3 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.46 cputime=93.559 memavail=714740 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.503
Stats 1978.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9318 bytes_read=24239 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=36.4 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.5  sysload=0.46 cputime=93.596 memavail=714940 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.503
Stats 1979.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9352 bytes_read=24430 bytes_retransmit=9 bytes_invalid=0 send_seq=588 receive_seq=588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=36.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.46 cputime=93.633 memavail=714992 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.503
Stats 1980.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9392 bytes_read=24666 bytes_retransmit=9 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=36.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.46 cputime=93.670 memavail=713360 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.503
Stats 1981.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9442 bytes_read=24890 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=0 temp=36.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.46 cputime=93.709 memavail=713120 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.424
Stats 1982.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9476 bytes_read=25071 bytes_retransmit=9 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=0 temp=36.2 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.42 cputime=93.745 memavail=713120 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.424
Stats 1983.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9510 bytes_read=25285 bytes_retransmit=9 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=0 temp=36.2 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.5  sysload=0.42 cputime=93.783 memavail=713116 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.424
Stats 1984.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9544 bytes_read=25490 bytes_retransmit=9 bytes_invalid=0 send_seq=605 receive_seq=605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=0 temp=36.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.42 cputime=93.820 memavail=713156 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.424
Stats 1985.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9594 bytes_read=25686 bytes_retransmit=9 bytes_invalid=0 send_seq=609 receive_seq=609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=36.2 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.42 cputime=93.858 memavail=713740 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.461
Stats 1986.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9628 bytes_read=25920 bytes_retransmit=9 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=36.2 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.5  sysload=0.42 cputime=93.895 memavail=713836 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.461
Stats 1987.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9662 bytes_read=26125 bytes_retransmit=9 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=36.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.39 cputime=93.932 memavail=713540 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.461
Stats 1988.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9696 bytes_read=26316 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=36.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.6  sysload=0.39 cputime=93.968 memavail=713844 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.461
Stats 1989.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9746 bytes_read=26541 bytes_retransmit=9 bytes_invalid=0 send_seq=622 receive_seq=622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=36.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.39 cputime=94.006 memavail=713844 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1990.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9780 bytes_read=26746 bytes_retransmit=9 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=36.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.39 cputime=94.043 memavail=713972 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1991.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9814 bytes_read=26951 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=36.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.39 cputime=94.080 memavail=712716 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.489
Stats 1992.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9848 bytes_read=27171 bytes_retransmit=9 bytes_invalid=0 send_seq=631 receive_seq=631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=36.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.2  sysload=0.36 cputime=94.118 memavail=713004 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.489
Stats 1993.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=9898 bytes_read=27381 bytes_retransmit=9 bytes_invalid=0 send_seq=635 receive_seq=635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=0 temp=36.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.7  sysload=0.36 cputime=94.155 memavail=713284 print_time=76.817 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 1994.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10415 bytes_read=27979 bytes_retransmit=9 bytes_invalid=0 send_seq=665 receive_seq=665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=36.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.4  sysload=0.36 cputime=94.253 memavail=713312 print_time=114.820 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 1995.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=10880 bytes_read=28535 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=0 temp=36.0 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.4  sysload=0.36 cputime=94.317 memavail=714072 print_time=115.820 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 1996.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=11322 bytes_read=29091 bytes_retransmit=9 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 heater_bed: target=0 temp=36.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.36 cputime=94.382 memavail=714096 print_time=116.820 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 1997.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=12465 bytes_read=30157 bytes_retransmit=9 bytes_invalid=0 send_seq=801 receive_seq=801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=36.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.33 cputime=94.532 memavail=714176 print_time=117.903 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 1998.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=13396 bytes_read=31126 bytes_retransmit=9 bytes_invalid=0 send_seq=859 receive_seq=859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=36.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.33 cputime=94.655 memavail=713928 print_time=118.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.512
Stats 1999.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=13894 bytes_read=31759 bytes_retransmit=9 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=36.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.6  sysload=0.33 cputime=94.733 memavail=714432 print_time=119.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.512
Stats 2000.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=14392 bytes_read=32378 bytes_retransmit=9 bytes_invalid=0 send_seq=937 receive_seq=937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 heater_bed: target=0 temp=36.0 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.4  sysload=0.33 cputime=94.808 memavail=715220 print_time=120.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.512
Stats 2001.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=14880 bytes_read=33031 bytes_retransmit=9 bytes_invalid=0 send_seq=974 receive_seq=974 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=0 temp=36.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.4  sysload=0.33 cputime=94.882 memavail=715220 print_time=121.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.512
Stats 2002.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=15390 bytes_read=33654 bytes_retransmit=9 bytes_invalid=0 send_seq=1011 receive_seq=1011 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=0 temp=35.9 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.4  sysload=0.30 cputime=94.956 memavail=714976 print_time=122.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.502
Stats 2003.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=15888 bytes_read=34273 bytes_retransmit=9 bytes_invalid=0 send_seq=1050 receive_seq=1050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996885 heater_bed: target=0 temp=35.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=31.6  sysload=0.30 cputime=95.029 memavail=714980 print_time=123.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.502
Stats 2004.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=16397 bytes_read=34921 bytes_retransmit=9 bytes_invalid=0 send_seq=1089 receive_seq=1089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=0 temp=35.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.30 cputime=95.103 memavail=714980 print_time=124.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.447
Stats 2005.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=16890 bytes_read=35549 bytes_retransmit=9 bytes_invalid=0 send_seq=1127 receive_seq=1127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=0 temp=35.8 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.30 cputime=95.183 memavail=714580 print_time=125.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 2006.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=17388 bytes_read=36183 bytes_retransmit=9 bytes_invalid=0 send_seq=1166 receive_seq=1166 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=35.8 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.4  sysload=0.30 cputime=95.256 memavail=714612 print_time=126.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 2007.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=17881 bytes_read=36824 bytes_retransmit=9 bytes_invalid=0 send_seq=1205 receive_seq=1205 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=0 temp=35.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.2  sysload=0.36 cputime=95.330 memavail=714360 print_time=127.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.447
Stats 2008.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=18380 bytes_read=37436 bytes_retransmit=9 bytes_invalid=0 send_seq=1244 receive_seq=1244 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996866 heater_bed: target=0 temp=35.8 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.4  sysload=0.36 cputime=95.408 memavail=714368 print_time=128.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.450
Stats 2009.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=18876 bytes_read=38051 bytes_retransmit=9 bytes_invalid=0 send_seq=1283 receive_seq=1283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996866 heater_bed: target=0 temp=35.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.36 cputime=95.485 memavail=714368 print_time=129.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.450
Stats 2010.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=19374 bytes_read=38699 bytes_retransmit=9 bytes_invalid=0 send_seq=1322 receive_seq=1322 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996865 heater_bed: target=0 temp=35.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.36 cputime=95.565 memavail=713180 print_time=130.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.450
Stats 2011.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=19867 bytes_read=39342 bytes_retransmit=9 bytes_invalid=0 send_seq=1360 receive_seq=1360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=35.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.36 cputime=95.642 memavail=712932 print_time=131.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.450
Stats 2012.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=20371 bytes_read=39956 bytes_retransmit=9 bytes_invalid=0 send_seq=1398 receive_seq=1398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996863 heater_bed: target=0 temp=35.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.33 cputime=95.728 memavail=713740 print_time=132.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.471
Stats 2013.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=20869 bytes_read=40604 bytes_retransmit=9 bytes_invalid=0 send_seq=1437 receive_seq=1437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996866 heater_bed: target=0 temp=35.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.33 cputime=95.808 memavail=713992 print_time=133.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.471
Stats 2014.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=21367 bytes_read=41237 bytes_retransmit=9 bytes_invalid=0 send_seq=1476 receive_seq=1476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=35.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.3  sysload=0.33 cputime=95.893 memavail=714208 print_time=134.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.471
Stats 2015.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=21865 bytes_read=41856 bytes_retransmit=9 bytes_invalid=0 send_seq=1515 receive_seq=1515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=35.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.3  sysload=0.33 cputime=95.977 memavail=713676 print_time=135.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 2016.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=22369 bytes_read=42528 bytes_retransmit=9 bytes_invalid=0 send_seq=1553 receive_seq=1553 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=35.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.33 cputime=96.058 memavail=713676 print_time=136.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 2017.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=22867 bytes_read=43147 bytes_retransmit=9 bytes_invalid=0 send_seq=1592 receive_seq=1592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=35.6 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.3  sysload=0.30 cputime=96.143 memavail=714444 print_time=137.828 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 2018.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=23530 bytes_read=43805 bytes_retransmit=9 bytes_invalid=0 send_seq=1632 receive_seq=1632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996866 heater_bed: target=0 temp=35.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.30 cputime=96.231 memavail=714444 print_time=139.621 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 2019.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=23739 bytes_read=44211 bytes_retransmit=9 bytes_invalid=0 send_seq=1645 receive_seq=1645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996868 heater_bed: target=0 temp=35.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.6  sysload=0.30 cputime=96.299 memavail=714952 print_time=139.821 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.479
Stats 2020.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=24228 bytes_read=44830 bytes_retransmit=9 bytes_invalid=0 send_seq=1684 receive_seq=1684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=0 temp=35.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=31.4  sysload=0.30 cputime=96.384 memavail=713316 print_time=140.821 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 2021.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=24776 bytes_read=45556 bytes_retransmit=9 bytes_invalid=0 send_seq=1730 receive_seq=1729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996869 heater_bed: target=0 temp=35.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.30 cputime=96.474 memavail=714292 print_time=141.889 buffer_time=0.239 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 2022.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=24902 bytes_read=45952 bytes_retransmit=9 bytes_invalid=0 send_seq=1740 receive_seq=1740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=35.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.28 cputime=96.540 memavail=714020 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 2023.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=25053 bytes_read=46291 bytes_retransmit=9 bytes_invalid=0 send_seq=1751 receive_seq=1751 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=0 temp=35.5 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.5  sysload=0.28 cputime=96.602 memavail=714580 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 2024.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=25171 bytes_read=46620 bytes_retransmit=9 bytes_invalid=0 send_seq=1760 receive_seq=1760 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=0 temp=35.5 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.6  sysload=0.28 cputime=96.660 memavail=714584 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 2025.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=25319 bytes_read=47002 bytes_retransmit=9 bytes_invalid=0 send_seq=1771 receive_seq=1771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=35.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.28 cputime=96.723 memavail=714584 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.470
Stats 2026.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=25437 bytes_read=47346 bytes_retransmit=9 bytes_invalid=0 send_seq=1780 receive_seq=1780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=35.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.3  sysload=0.28 cputime=96.781 memavail=715088 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.470
Stats 2027.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=25555 bytes_read=47675 bytes_retransmit=9 bytes_invalid=0 send_seq=1789 receive_seq=1789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=35.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.26 cputime=96.840 memavail=715352 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.470
Stats 2028.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=25673 bytes_read=48047 bytes_retransmit=9 bytes_invalid=0 send_seq=1798 receive_seq=1798 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=35.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.6  sysload=0.26 cputime=96.899 memavail=715352 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 2029.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=25807 bytes_read=48381 bytes_retransmit=9 bytes_invalid=0 send_seq=1808 receive_seq=1808 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=35.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.26 cputime=96.956 memavail=715352 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.498
Stats 2030.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=25925 bytes_read=48710 bytes_retransmit=9 bytes_invalid=0 send_seq=1817 receive_seq=1817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=0 temp=35.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.26 cputime=97.016 memavail=715352 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.498
Stats 2031.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=26043 bytes_read=49097 bytes_retransmit=9 bytes_invalid=0 send_seq=1826 receive_seq=1826 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=35.3 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.4  sysload=0.26 cputime=97.076 memavail=715604 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.498
Stats 2032.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=26161 bytes_read=49426 bytes_retransmit=9 bytes_invalid=0 send_seq=1835 receive_seq=1835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=35.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.3  sysload=0.24 cputime=97.137 memavail=715604 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.498
Stats 2033.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=26295 bytes_read=49750 bytes_retransmit=9 bytes_invalid=0 send_seq=1845 receive_seq=1845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=35.3 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.5  sysload=0.24 cputime=97.195 memavail=715612 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.476
Stats 2034.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=26413 bytes_read=50114 bytes_retransmit=9 bytes_invalid=0 send_seq=1854 receive_seq=1854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=0 temp=35.3 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.6  sysload=0.24 cputime=97.253 memavail=715388 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 2035.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=26531 bytes_read=50443 bytes_retransmit=9 bytes_invalid=0 send_seq=1863 receive_seq=1863 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=35.3 pwm=0.000 raspberry_pi: temp=45.0 mcu_temp: temp=31.5  sysload=0.24 cputime=97.311 memavail=715172 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 2036.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=26649 bytes_read=50802 bytes_retransmit=9 bytes_invalid=0 send_seq=1872 receive_seq=1872 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996930 heater_bed: target=0 temp=35.3 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=31.6  sysload=0.24 cputime=97.370 memavail=715172 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 2037.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=26778 bytes_read=51159 bytes_retransmit=9 bytes_invalid=0 send_seq=1881 receive_seq=1881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996927 heater_bed: target=0 temp=35.3 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.5  sysload=0.22 cputime=97.429 memavail=714676 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 2038.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=26896 bytes_read=51488 bytes_retransmit=9 bytes_invalid=0 send_seq=1890 receive_seq=1890 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=0 temp=35.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.4  sysload=0.22 cputime=97.487 memavail=714676 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.447
Stats 2039.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=27014 bytes_read=51832 bytes_retransmit=9 bytes_invalid=0 send_seq=1899 receive_seq=1899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=0 temp=35.2 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.5  sysload=0.22 cputime=97.545 memavail=714744 print_time=141.889 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.447
Adjust Front left screw. Then run ACCEPT, ADJUSTED, or ABORT
Use ADJUSTED if a significant screw adjustment is made
Stats 2040.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=27736 bytes_read=52244 bytes_retransmit=9 bytes_invalid=0 send_seq=1919 receive_seq=1919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=0 temp=35.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.4  sysload=0.22 cputime=97.615 memavail=714772 print_time=163.164 buffer_time=2.503 print_stall=0 extruder: target=200 temp=200.2 pwm=0.447
Stats 2041.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=27870 bytes_read=52593 bytes_retransmit=9 bytes_invalid=0 send_seq=1929 receive_seq=1929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996921 heater_bed: target=0 temp=35.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.6  sysload=0.22 cputime=97.674 memavail=714268 print_time=163.164 buffer_time=1.502 print_stall=0 extruder: target=200 temp=200.3 pwm=0.424
Stats 2042.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=27994 bytes_read=52953 bytes_retransmit=9 bytes_invalid=0 send_seq=1939 receive_seq=1939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=35.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.6  sysload=0.20 cputime=97.736 memavail=714016 print_time=163.164 buffer_time=0.502 print_stall=0 extruder: target=200 temp=200.2 pwm=0.424
Stats 2043.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=28112 bytes_read=53310 bytes_retransmit=9 bytes_invalid=0 send_seq=1948 receive_seq=1948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=0 temp=35.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.7  sysload=0.20 cputime=97.795 memavail=714272 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.424
Stats 2044.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=28279 bytes_read=53654 bytes_retransmit=9 bytes_invalid=0 send_seq=1960 receive_seq=1960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=0 temp=35.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.20 cputime=97.854 memavail=714412 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 2045.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=28397 bytes_read=53998 bytes_retransmit=9 bytes_invalid=0 send_seq=1969 receive_seq=1969 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=35.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.20 cputime=97.912 memavail=714644 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.480
Stats 2046.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=28515 bytes_read=54370 bytes_retransmit=9 bytes_invalid=0 send_seq=1978 receive_seq=1978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=35.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.4  sysload=0.20 cputime=97.970 memavail=713924 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.480
Stats 2047.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=28633 bytes_read=54699 bytes_retransmit=9 bytes_invalid=0 send_seq=1987 receive_seq=1987 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=35.0 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.4  sysload=0.18 cputime=98.028 memavail=713620 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.480
Stats 2048.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=28767 bytes_read=55048 bytes_retransmit=9 bytes_invalid=0 send_seq=1997 receive_seq=1997 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=35.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.18 cputime=98.087 memavail=713924 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.531
Stats 2049.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=28885 bytes_read=55405 bytes_retransmit=9 bytes_invalid=0 send_seq=2006 receive_seq=2006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=35.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=31.5  sysload=0.18 cputime=98.145 memavail=713932 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.531
Stats 2050.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=29003 bytes_read=55734 bytes_retransmit=9 bytes_invalid=0 send_seq=2015 receive_seq=2015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=0 temp=35.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.4  sysload=0.18 cputime=98.204 memavail=714520 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.531
Stats 2051.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=29121 bytes_read=56093 bytes_retransmit=9 bytes_invalid=0 send_seq=2024 receive_seq=2024 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=0 temp=35.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.18 cputime=98.263 memavail=714472 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.531
Stats 2052.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=29255 bytes_read=56455 bytes_retransmit=9 bytes_invalid=0 send_seq=2034 receive_seq=2034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=35.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.5  sysload=0.17 cputime=98.321 memavail=714528 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.517
Stats 2053.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=29373 bytes_read=56784 bytes_retransmit=9 bytes_invalid=0 send_seq=2043 receive_seq=2043 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=34.9 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.6  sysload=0.17 cputime=98.379 memavail=714784 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.517
Stats 2054.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=29491 bytes_read=57128 bytes_retransmit=9 bytes_invalid=0 send_seq=2052 receive_seq=2052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=35.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=31.7  sysload=0.17 cputime=98.438 memavail=714844 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.517
Stats 2055.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=29609 bytes_read=57485 bytes_retransmit=9 bytes_invalid=0 send_seq=2061 receive_seq=2061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=34.9 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.6  sysload=0.17 cputime=98.498 memavail=715732 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.517
Stats 2056.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=29743 bytes_read=57834 bytes_retransmit=9 bytes_invalid=0 send_seq=2071 receive_seq=2071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=0 temp=34.9 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.6  sysload=0.17 cputime=98.557 memavail=715268 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.488
Stats 2057.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=29861 bytes_read=58178 bytes_retransmit=9 bytes_invalid=0 send_seq=2080 receive_seq=2080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=0 temp=34.9 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.2  sysload=0.15 cputime=98.617 memavail=715116 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.488
Stats 2058.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=29995 bytes_read=58535 bytes_retransmit=9 bytes_invalid=0 send_seq=2090 receive_seq=2090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=0 temp=34.9 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.5  sysload=0.15 cputime=98.679 memavail=714392 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.424
Stats 2059.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=30113 bytes_read=58854 bytes_retransmit=9 bytes_invalid=0 send_seq=2099 receive_seq=2099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=34.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.15 cputime=98.739 memavail=714556 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.424
Stats 2060.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=30231 bytes_read=59195 bytes_retransmit=9 bytes_invalid=0 send_seq=2108 receive_seq=2108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=0 temp=34.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.5  sysload=0.15 cputime=98.798 memavail=714856 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.424
Stats 2061.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=30349 bytes_read=59567 bytes_retransmit=9 bytes_invalid=0 send_seq=2117 receive_seq=2117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=0 temp=34.8 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.5  sysload=0.15 cputime=98.856 memavail=715056 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.424
Stats 2062.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=30483 bytes_read=59901 bytes_retransmit=9 bytes_invalid=0 send_seq=2127 receive_seq=2127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=34.8 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.6  sysload=0.14 cputime=98.915 memavail=715164 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.458
Stats 2063.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=30601 bytes_read=60245 bytes_retransmit=9 bytes_invalid=0 send_seq=2136 receive_seq=2136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=34.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.14 cputime=98.974 memavail=714912 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.458
Stats 2064.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=30719 bytes_read=60602 bytes_retransmit=9 bytes_invalid=0 send_seq=2145 receive_seq=2145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=34.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.8  sysload=0.14 cputime=99.034 memavail=715200 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.509
Stats 2065.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=30853 bytes_read=60936 bytes_retransmit=9 bytes_invalid=0 send_seq=2155 receive_seq=2155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=34.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.6  sysload=0.14 cputime=99.093 memavail=716000 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.509
Stats 2066.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=30971 bytes_read=61295 bytes_retransmit=9 bytes_invalid=0 send_seq=2164 receive_seq=2164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=34.7 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.7  sysload=0.14 cputime=99.153 memavail=715824 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.509
Stats 2067.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=31089 bytes_read=61652 bytes_retransmit=9 bytes_invalid=0 send_seq=2173 receive_seq=2173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=34.7 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.7  sysload=0.13 cputime=99.211 memavail=715824 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.509
Stats 2068.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=31207 bytes_read=61981 bytes_retransmit=9 bytes_invalid=0 send_seq=2182 receive_seq=2182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=34.7 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.7  sysload=0.13 cputime=99.270 memavail=715332 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.509
Stats 2069.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=31341 bytes_read=62330 bytes_retransmit=9 bytes_invalid=0 send_seq=2192 receive_seq=2192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=34.7 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.6  sysload=0.13 cputime=99.330 memavail=715332 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.515
Stats 2070.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=31459 bytes_read=62687 bytes_retransmit=9 bytes_invalid=0 send_seq=2201 receive_seq=2201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=34.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.7  sysload=0.13 cputime=99.389 memavail=715180 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.515
Stats 2071.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=31577 bytes_read=63031 bytes_retransmit=9 bytes_invalid=0 send_seq=2210 receive_seq=2210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=34.6 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.6  sysload=0.13 cputime=99.448 memavail=715128 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.515
Stats 2072.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=31695 bytes_read=63375 bytes_retransmit=9 bytes_invalid=0 send_seq=2219 receive_seq=2219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=34.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.28 cputime=99.507 memavail=714932 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.515
Stats 2073.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=31829 bytes_read=63737 bytes_retransmit=9 bytes_invalid=0 send_seq=2229 receive_seq=2229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=34.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=31.5  sysload=0.28 cputime=99.568 memavail=714472 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 2074.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=31947 bytes_read=64066 bytes_retransmit=9 bytes_invalid=0 send_seq=2238 receive_seq=2238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=34.6 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=31.6  sysload=0.28 cputime=99.628 memavail=714724 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 2075.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=32065 bytes_read=64410 bytes_retransmit=9 bytes_invalid=0 send_seq=2247 receive_seq=2247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=34.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.28 cputime=99.688 memavail=714588 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.483
Stats 2076.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=32183 bytes_read=64782 bytes_retransmit=9 bytes_invalid=0 send_seq=2256 receive_seq=2256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=34.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.28 cputime=99.748 memavail=714788 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.483
Stats 2077.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=32317 bytes_read=65116 bytes_retransmit=9 bytes_invalid=0 send_seq=2266 receive_seq=2266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=0 temp=34.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.7  sysload=0.26 cputime=99.810 memavail=714244 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 2078.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=32435 bytes_read=65460 bytes_retransmit=9 bytes_invalid=0 send_seq=2275 receive_seq=2275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=0 temp=34.5 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.5  sysload=0.26 cputime=99.871 memavail=713988 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.470
Stats 2079.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=32553 bytes_read=65817 bytes_retransmit=9 bytes_invalid=0 send_seq=2284 receive_seq=2284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=34.5 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.5  sysload=0.26 cputime=99.932 memavail=714252 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 2080.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=32671 bytes_read=66146 bytes_retransmit=9 bytes_invalid=0 send_seq=2293 receive_seq=2293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=34.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.6  sysload=0.26 cputime=99.993 memavail=714028 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.470
Stats 2081.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=32819 bytes_read=66515 bytes_retransmit=9 bytes_invalid=0 send_seq=2304 receive_seq=2304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=0 temp=34.5 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.6  sysload=0.26 cputime=100.055 memavail=714056 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 2082.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=32937 bytes_read=66872 bytes_retransmit=9 bytes_invalid=0 send_seq=2313 receive_seq=2313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=34.5 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.6  sysload=0.24 cputime=100.118 memavail=714056 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 2083.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=33055 bytes_read=67201 bytes_retransmit=9 bytes_invalid=0 send_seq=2322 receive_seq=2322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=34.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.6  sysload=0.24 cputime=100.185 memavail=713768 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 2084.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=33173 bytes_read=67537 bytes_retransmit=9 bytes_invalid=0 send_seq=2331 receive_seq=2331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=34.4 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.5  sysload=0.24 cputime=100.249 memavail=714588 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.478
Stats 2085.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=33291 bytes_read=67885 bytes_retransmit=9 bytes_invalid=0 send_seq=2340 receive_seq=2340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=34.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.8  sysload=0.24 cputime=100.311 memavail=714844 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 2086.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=33425 bytes_read=68234 bytes_retransmit=9 bytes_invalid=0 send_seq=2350 receive_seq=2350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=34.5 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.6  sysload=0.24 cputime=100.372 memavail=714912 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 2087.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=33543 bytes_read=68578 bytes_retransmit=9 bytes_invalid=0 send_seq=2359 receive_seq=2359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=0 temp=34.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.7  sysload=0.22 cputime=100.433 memavail=714912 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 2088.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=33661 bytes_read=68935 bytes_retransmit=9 bytes_invalid=0 send_seq=2368 receive_seq=2368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=0 temp=34.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.7  sysload=0.22 cputime=100.500 memavail=714304 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 2089.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=33779 bytes_read=69264 bytes_retransmit=9 bytes_invalid=0 send_seq=2377 receive_seq=2377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=34.4 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.6  sysload=0.22 cputime=100.560 memavail=714416 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 2090.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=33913 bytes_read=69613 bytes_retransmit=9 bytes_invalid=0 send_seq=2387 receive_seq=2387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=34.3 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.8  sysload=0.22 cputime=100.621 memavail=713280 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 2091.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=34031 bytes_read=69985 bytes_retransmit=9 bytes_invalid=0 send_seq=2396 receive_seq=2396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=34.4 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=31.8  sysload=0.22 cputime=100.686 memavail=713808 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 2092.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=34149 bytes_read=70314 bytes_retransmit=9 bytes_invalid=0 send_seq=2405 receive_seq=2405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=34.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.7  sysload=0.20 cputime=100.746 memavail=714064 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 2093.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=34267 bytes_read=70658 bytes_retransmit=9 bytes_invalid=0 send_seq=2414 receive_seq=2414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=0 temp=34.3 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.8  sysload=0.20 cputime=100.807 memavail=713820 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.471
Stats 2094.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=34401 bytes_read=71020 bytes_retransmit=9 bytes_invalid=0 send_seq=2424 receive_seq=2424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=34.3 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.20 cputime=100.869 memavail=713828 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 2095.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=34519 bytes_read=71349 bytes_retransmit=9 bytes_invalid=0 send_seq=2433 receive_seq=2433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=34.3 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.6  sysload=0.20 cputime=100.935 memavail=713480 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.485
Stats 2096.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=34637 bytes_read=71708 bytes_retransmit=9 bytes_invalid=0 send_seq=2442 receive_seq=2442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=34.2 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.7  sysload=0.20 cputime=100.996 memavail=713480 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.485
Stats 2097.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=34755 bytes_read=72065 bytes_retransmit=9 bytes_invalid=0 send_seq=2451 receive_seq=2451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=34.3 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=31.8  sysload=0.18 cputime=101.057 memavail=713480 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.485
Stats 2098.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=34889 bytes_read=72399 bytes_retransmit=9 bytes_invalid=0 send_seq=2461 receive_seq=2461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=34.2 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.9  sysload=0.18 cputime=101.119 memavail=713480 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.509
Stats 2099.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35007 bytes_read=72743 bytes_retransmit=9 bytes_invalid=0 send_seq=2470 receive_seq=2470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=34.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.9  sysload=0.18 cputime=101.181 memavail=713484 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.509
Stats 2100.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35125 bytes_read=73100 bytes_retransmit=9 bytes_invalid=0 send_seq=2479 receive_seq=2479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=34.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.7  sysload=0.18 cputime=101.246 memavail=714068 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.509
Stats 2101.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35243 bytes_read=73444 bytes_retransmit=9 bytes_invalid=0 send_seq=2488 receive_seq=2488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=34.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=31.9  sysload=0.18 cputime=101.307 memavail=713816 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.509
Stats 2102.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35372 bytes_read=73788 bytes_retransmit=9 bytes_invalid=0 send_seq=2497 receive_seq=2497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=34.2 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.5  sysload=0.17 cputime=101.369 memavail=713816 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.505
Stats 2103.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35490 bytes_read=74145 bytes_retransmit=9 bytes_invalid=0 send_seq=2506 receive_seq=2506 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=31.8  sysload=0.17 cputime=101.429 memavail=713568 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.505
Stats 2104.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35630 bytes_read=74495 bytes_retransmit=9 bytes_invalid=0 send_seq=2517 receive_seq=2517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.7  sysload=0.17 cputime=101.491 memavail=713860 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.453
Stats 2105.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35748 bytes_read=74839 bytes_retransmit=9 bytes_invalid=0 send_seq=2526 receive_seq=2526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.7  sysload=0.17 cputime=101.552 memavail=714972 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.453
Stats 2106.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35866 bytes_read=75211 bytes_retransmit=9 bytes_invalid=0 send_seq=2535 receive_seq=2535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.8  sysload=0.17 cputime=101.613 memavail=714972 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.453
Stats 2107.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=35984 bytes_read=75540 bytes_retransmit=9 bytes_invalid=0 send_seq=2544 receive_seq=2544 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.7  sysload=0.15 cputime=101.674 memavail=714976 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.453
Stats 2108.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=36118 bytes_read=75889 bytes_retransmit=9 bytes_invalid=0 send_seq=2554 receive_seq=2554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.9  sysload=0.15 cputime=101.735 memavail=714976 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 2109.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=36236 bytes_read=76243 bytes_retransmit=9 bytes_invalid=0 send_seq=2563 receive_seq=2563 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.8  sysload=0.15 cputime=101.798 memavail=714980 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 2110.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=36354 bytes_read=76562 bytes_retransmit=9 bytes_invalid=0 send_seq=2572 receive_seq=2572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.8  sysload=0.15 cputime=101.859 memavail=713852 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 2111.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=36472 bytes_read=76918 bytes_retransmit=9 bytes_invalid=0 send_seq=2581 receive_seq=2581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=31.9  sysload=0.15 cputime=101.919 memavail=714104 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 2112.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=36606 bytes_read=77280 bytes_retransmit=9 bytes_invalid=0 send_seq=2591 receive_seq=2591 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=34.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=31.7  sysload=0.14 cputime=101.980 memavail=714316 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 2113.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=36724 bytes_read=77609 bytes_retransmit=9 bytes_invalid=0 send_seq=2600 receive_seq=2600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=34.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.8  sysload=0.14 cputime=102.040 memavail=714624 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 2114.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=36842 bytes_read=77953 bytes_retransmit=9 bytes_invalid=0 send_seq=2609 receive_seq=2609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=0 temp=34.0 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=31.9  sysload=0.14 cputime=102.101 memavail=714624 print_time=163.164 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.504
Adjust Rear left screw. Then run ACCEPT, ADJUSTED, or ABORT
Use ADJUSTED if a significant screw adjustment is made
Stats 2115.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=37062 bytes_read=78320 bytes_retransmit=9 bytes_invalid=0 send_seq=2620 receive_seq=2620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=0 temp=34.0 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.8  sysload=0.14 cputime=102.169 memavail=715208 print_time=236.881 buffer_time=1.174 print_stall=0 extruder: target=200 temp=200.0 pwm=0.504
Stats 2116.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=37592 bytes_read=78699 bytes_retransmit=9 bytes_invalid=0 send_seq=2636 receive_seq=2636 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=34.0 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.9  sysload=0.14 cputime=102.237 memavail=714776 print_time=241.360 buffer_time=4.653 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 2117.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=37710 bytes_read=79057 bytes_retransmit=9 bytes_invalid=0 send_seq=2645 receive_seq=2645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=34.0 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=31.8  sysload=0.13 cputime=102.299 memavail=714776 print_time=241.360 buffer_time=3.652 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 2118.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=37828 bytes_read=79400 bytes_retransmit=9 bytes_invalid=0 send_seq=2654 receive_seq=2654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=0 temp=34.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.7  sysload=0.13 cputime=102.361 memavail=715072 print_time=241.360 buffer_time=2.651 print_stall=0 extruder: target=200 temp=200.1 pwm=0.482
Stats 2119.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=37946 bytes_read=79729 bytes_retransmit=9 bytes_invalid=0 send_seq=2663 receive_seq=2663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=0 temp=33.9 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=31.7  sysload=0.13 cputime=102.421 memavail=715080 print_time=241.360 buffer_time=1.650 print_stall=0 extruder: target=200 temp=200.1 pwm=0.482
Stats 2120.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=38064 bytes_read=80087 bytes_retransmit=9 bytes_invalid=0 send_seq=2672 receive_seq=2672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=33.9 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=31.8  sysload=0.13 cputime=102.483 memavail=714168 print_time=241.360 buffer_time=0.649 print_stall=0 extruder: target=200 temp=200.1 pwm=0.482
Stats 2121.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=38198 bytes_read=80450 bytes_retransmit=9 bytes_invalid=0 send_seq=2682 receive_seq=2682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=0 temp=33.9 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=31.9  sysload=0.13 cputime=102.545 memavail=714168 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.452
Stats 2122.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=38344 bytes_read=80784 bytes_retransmit=9 bytes_invalid=0 send_seq=2692 receive_seq=2692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=33.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.1  sysload=0.12 cputime=102.607 memavail=714292 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.452
Stats 2123.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=38462 bytes_read=81142 bytes_retransmit=9 bytes_invalid=0 send_seq=2701 receive_seq=2701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=33.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=31.8  sysload=0.12 cputime=102.668 memavail=714300 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.452
Stats 2124.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=38580 bytes_read=81485 bytes_retransmit=9 bytes_invalid=0 send_seq=2710 receive_seq=2710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=33.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.1  sysload=0.12 cputime=102.730 memavail=713796 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.452
Stats 2125.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=38714 bytes_read=81819 bytes_retransmit=9 bytes_invalid=0 send_seq=2720 receive_seq=2720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=33.9 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.1  sysload=0.12 cputime=102.791 memavail=714120 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.487
Stats 2126.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=38832 bytes_read=82192 bytes_retransmit=9 bytes_invalid=0 send_seq=2729 receive_seq=2729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=33.9 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=32.2  sysload=0.12 cputime=102.851 memavail=714120 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.487
Stats 2127.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=38950 bytes_read=82535 bytes_retransmit=9 bytes_invalid=0 send_seq=2738 receive_seq=2738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.1  sysload=0.11 cputime=102.911 memavail=714128 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 2128.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=39068 bytes_read=82864 bytes_retransmit=9 bytes_invalid=0 send_seq=2747 receive_seq=2747 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.1  sysload=0.11 cputime=102.972 memavail=714128 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.487
Stats 2129.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=39202 bytes_read=83227 bytes_retransmit=9 bytes_invalid=0 send_seq=2757 receive_seq=2757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.1  sysload=0.11 cputime=103.034 memavail=714136 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.536
Stats 2130.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000020 bytes_write=39320 bytes_read=83570 bytes_retransmit=9 bytes_invalid=0 send_seq=2766 receive_seq=2766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.1  sysload=0.11 cputime=103.096 memavail=714876 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.536
Stats 2131.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=39438 bytes_read=83914 bytes_retransmit=9 bytes_invalid=0 send_seq=2775 receive_seq=2775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.1  sysload=0.11 cputime=103.156 memavail=715208 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.536
Stats 2132.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=39556 bytes_read=84272 bytes_retransmit=9 bytes_invalid=0 send_seq=2784 receive_seq=2784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.2  sysload=0.10 cputime=103.216 memavail=715464 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.536
Stats 2133.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=39690 bytes_read=84620 bytes_retransmit=9 bytes_invalid=0 send_seq=2794 receive_seq=2794 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.0  sysload=0.10 cputime=103.279 memavail=715212 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.513
Stats 2134.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=39808 bytes_read=84949 bytes_retransmit=9 bytes_invalid=0 send_seq=2803 receive_seq=2803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.2  sysload=0.10 cputime=103.343 memavail=714908 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.513
Stats 2135.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=39942 bytes_read=85303 bytes_retransmit=9 bytes_invalid=0 send_seq=2813 receive_seq=2813 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.2  sysload=0.10 cputime=103.405 memavail=715644 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.459
Stats 2136.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=40060 bytes_read=85652 bytes_retransmit=9 bytes_invalid=0 send_seq=2822 receive_seq=2822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.2  sysload=0.10 cputime=103.466 memavail=715392 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 2137.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=40178 bytes_read=85981 bytes_retransmit=9 bytes_invalid=0 send_seq=2831 receive_seq=2831 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=0 temp=33.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.3  sysload=0.09 cputime=103.526 memavail=715340 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.459
Stats 2138.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=40296 bytes_read=86339 bytes_retransmit=9 bytes_invalid=0 send_seq=2840 receive_seq=2840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=32.2  sysload=0.09 cputime=103.588 memavail=715340 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.459
Stats 2139.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=40430 bytes_read=86687 bytes_retransmit=9 bytes_invalid=0 send_seq=2850 receive_seq=2850 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.3  sysload=0.09 cputime=103.649 memavail=715088 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 2140.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=40548 bytes_read=87016 bytes_retransmit=9 bytes_invalid=0 send_seq=2859 receive_seq=2859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.3  sysload=0.09 cputime=103.709 memavail=714888 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.481
Stats 2141.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=40666 bytes_read=87389 bytes_retransmit=9 bytes_invalid=0 send_seq=2868 receive_seq=2868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.3  sysload=0.09 cputime=103.770 memavail=715196 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 2142.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=40784 bytes_read=87732 bytes_retransmit=9 bytes_invalid=0 send_seq=2877 receive_seq=2877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.3  sysload=0.08 cputime=103.831 memavail=714692 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.481
Stats 2143.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=40918 bytes_read=88066 bytes_retransmit=9 bytes_invalid=0 send_seq=2887 receive_seq=2887 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996885 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.4  sysload=0.08 cputime=103.893 memavail=714948 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.518
Stats 2144.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=41036 bytes_read=88424 bytes_retransmit=9 bytes_invalid=0 send_seq=2896 receive_seq=2896 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.4  sysload=0.08 cputime=103.953 memavail=714696 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.518
Stats 2145.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=41154 bytes_read=88767 bytes_retransmit=9 bytes_invalid=0 send_seq=2905 receive_seq=2905 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.4  sysload=0.08 cputime=104.014 memavail=715160 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.518
Stats 2146.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=41272 bytes_read=89111 bytes_retransmit=9 bytes_invalid=0 send_seq=2914 receive_seq=2914 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.4  sysload=0.08 cputime=104.075 memavail=715236 print_time=241.360 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.518
Adjust Rear right screw. Then run ACCEPT, ADJUSTED, or ABORT
Use ADJUSTED if a significant screw adjustment is made
Stats 2147.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=41502 bytes_read=89479 bytes_retransmit=9 bytes_invalid=0 send_seq=2925 receive_seq=2925 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.4  sysload=0.08 cputime=104.143 memavail=715688 print_time=268.950 buffer_time=1.217 print_stall=0 extruder: target=200 temp=200.0 pwm=0.461
Stats 2148.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=42021 bytes_read=89857 bytes_retransmit=9 bytes_invalid=0 send_seq=2941 receive_seq=2941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.4  sysload=0.08 cputime=104.211 memavail=715740 print_time=273.409 buffer_time=4.675 print_stall=0 extruder: target=200 temp=200.0 pwm=0.461
Stats 2149.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=42139 bytes_read=90186 bytes_retransmit=9 bytes_invalid=0 send_seq=2950 receive_seq=2950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.3  sysload=0.08 cputime=104.272 memavail=715940 print_time=273.409 buffer_time=3.674 print_stall=0 extruder: target=200 temp=200.1 pwm=0.461
Stats 2150.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=42257 bytes_read=90544 bytes_retransmit=9 bytes_invalid=0 send_seq=2959 receive_seq=2959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.5  sysload=0.08 cputime=104.335 memavail=715388 print_time=273.409 buffer_time=2.673 print_stall=0 extruder: target=200 temp=200.1 pwm=0.461
Stats 2151.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=42386 bytes_read=90902 bytes_retransmit=9 bytes_invalid=0 send_seq=2968 receive_seq=2968 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996888 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.2  sysload=0.08 cputime=104.396 memavail=715336 print_time=273.409 buffer_time=1.672 print_stall=0 extruder: target=200 temp=200.2 pwm=0.444
Stats 2152.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=42504 bytes_read=91231 bytes_retransmit=9 bytes_invalid=0 send_seq=2977 receive_seq=2977 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996886 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.6  sysload=0.07 cputime=104.458 memavail=715892 print_time=273.409 buffer_time=0.672 print_stall=0 extruder: target=200 temp=200.2 pwm=0.444
Stats 2153.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=42622 bytes_read=91589 bytes_retransmit=9 bytes_invalid=0 send_seq=2986 receive_seq=2986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.4  sysload=0.07 cputime=104.519 memavail=715640 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.444
Stats 2154.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=42768 bytes_read=91937 bytes_retransmit=9 bytes_invalid=0 send_seq=2996 receive_seq=2996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.4  sysload=0.07 cputime=104.581 memavail=715644 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.444
Stats 2155.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=42886 bytes_read=92266 bytes_retransmit=9 bytes_invalid=0 send_seq=3005 receive_seq=3005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.4  sysload=0.07 cputime=104.640 memavail=716268 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.444
Stats 2156.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=43015 bytes_read=92639 bytes_retransmit=9 bytes_invalid=0 send_seq=3014 receive_seq=3014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996881 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.4  sysload=0.07 cputime=104.701 memavail=716268 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.482
Stats 2157.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=43133 bytes_read=92982 bytes_retransmit=9 bytes_invalid=0 send_seq=3023 receive_seq=3023 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.07 cputime=104.761 memavail=716268 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.482
Stats 2158.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=43265 bytes_read=93316 bytes_retransmit=9 bytes_invalid=0 send_seq=3033 receive_seq=3033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.4  sysload=0.07 cputime=104.822 memavail=716268 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.482
Stats 2159.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=43383 bytes_read=93674 bytes_retransmit=9 bytes_invalid=0 send_seq=3042 receive_seq=3042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=32.4  sysload=0.07 cputime=104.883 memavail=716520 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.482
Stats 2160.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=43517 bytes_read=94019 bytes_retransmit=9 bytes_invalid=0 send_seq=3052 receive_seq=3052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.6  sysload=0.07 cputime=104.951 memavail=715100 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.501
Stats 2161.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=43635 bytes_read=94353 bytes_retransmit=9 bytes_invalid=0 send_seq=3061 receive_seq=3061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.7  sysload=0.07 cputime=105.012 memavail=715408 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.501
Stats 2162.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=43753 bytes_read=94705 bytes_retransmit=9 bytes_invalid=0 send_seq=3070 receive_seq=3070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.4  sysload=0.06 cputime=105.072 memavail=715360 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.501
Stats 2163.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=43871 bytes_read=95048 bytes_retransmit=9 bytes_invalid=0 send_seq=3079 receive_seq=3079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.6  sysload=0.06 cputime=105.133 memavail=715280 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.501
Stats 2164.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=44005 bytes_read=95382 bytes_retransmit=9 bytes_invalid=0 send_seq=3089 receive_seq=3089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.6  sysload=0.06 cputime=105.194 memavail=715040 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 2165.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=44129 bytes_read=95738 bytes_retransmit=9 bytes_invalid=0 send_seq=3099 receive_seq=3099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.5  sysload=0.06 cputime=105.261 memavail=713468 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.506
Stats 2166.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=44247 bytes_read=96096 bytes_retransmit=9 bytes_invalid=0 send_seq=3108 receive_seq=3108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=32.6  sysload=0.06 cputime=105.321 memavail=713456 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 2167.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=44365 bytes_read=96420 bytes_retransmit=9 bytes_invalid=0 send_seq=3117 receive_seq=3116 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.5  sysload=0.06 cputime=105.379 memavail=713776 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 2168.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=44485 bytes_read=96779 bytes_retransmit=9 bytes_invalid=0 send_seq=3126 receive_seq=3126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.6  sysload=0.06 cputime=105.438 memavail=714028 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.457
Stats 2169.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=44589 bytes_read=97085 bytes_retransmit=9 bytes_invalid=0 send_seq=3134 receive_seq=3134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.6  sysload=0.06 cputime=105.500 memavail=714728 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.457
Stats 2170.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=44707 bytes_read=97414 bytes_retransmit=9 bytes_invalid=0 send_seq=3143 receive_seq=3143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.6  sysload=0.06 cputime=105.561 memavail=712608 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.457
Stats 2171.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=44825 bytes_read=97801 bytes_retransmit=9 bytes_invalid=0 send_seq=3152 receive_seq=3152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.5  sysload=0.06 cputime=105.622 memavail=712668 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.457
Stats 2172.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=44945 bytes_read=98130 bytes_retransmit=9 bytes_invalid=0 send_seq=3161 receive_seq=3161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.8  sysload=0.29 cputime=105.682 memavail=712948 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 2173.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=45063 bytes_read=98441 bytes_retransmit=9 bytes_invalid=0 send_seq=3170 receive_seq=3170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.29 cputime=105.741 memavail=712644 print_time=273.409 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Adjust Front right screw. Then run ACCEPT, ADJUSTED, or ABORT
Use ADJUSTED if a significant screw adjustment is made
Stats 2174.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=45673 bytes_read=98835 bytes_retransmit=9 bytes_invalid=0 send_seq=3187 receive_seq=3187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.4  sysload=0.29 cputime=105.817 memavail=712192 print_time=300.125 buffer_time=5.371 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 2175.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=45791 bytes_read=99164 bytes_retransmit=9 bytes_invalid=0 send_seq=3196 receive_seq=3196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.7  sysload=0.29 cputime=105.878 memavail=711824 print_time=300.125 buffer_time=4.371 print_stall=0 extruder: target=200 temp=200.0 pwm=0.471
Stats 2176.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=45895 bytes_read=99503 bytes_retransmit=9 bytes_invalid=0 send_seq=3204 receive_seq=3204 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.5  sysload=0.29 cputime=105.938 memavail=711344 print_time=300.125 buffer_time=3.370 print_stall=0 extruder: target=200 temp=199.9 pwm=0.471
Stats 2177.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=46029 bytes_read=99857 bytes_retransmit=9 bytes_invalid=0 send_seq=3214 receive_seq=3213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.27 cputime=106.000 memavail=711344 print_time=300.125 buffer_time=2.369 print_stall=0 extruder: target=200 temp=199.9 pwm=0.511
Stats 2178.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=46133 bytes_read=100186 bytes_retransmit=9 bytes_invalid=0 send_seq=3222 receive_seq=3222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.5  sysload=0.27 cputime=106.060 memavail=711088 print_time=300.125 buffer_time=1.369 print_stall=0 extruder: target=200 temp=199.9 pwm=0.511
Stats 2179.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=46251 bytes_read=100530 bytes_retransmit=9 bytes_invalid=0 send_seq=3231 receive_seq=3231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.6  sysload=0.27 cputime=106.122 memavail=710880 print_time=300.125 buffer_time=0.365 print_stall=0 extruder: target=200 temp=199.9 pwm=0.511
Stats 2180.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=46378 bytes_read=100887 bytes_retransmit=9 bytes_invalid=0 send_seq=3241 receive_seq=3240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996882 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.7  sysload=0.27 cputime=106.184 memavail=711012 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.511
Stats 2181.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=46531 bytes_read=101241 bytes_retransmit=9 bytes_invalid=0 send_seq=3251 receive_seq=3251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.27 cputime=106.246 memavail=711012 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 2182.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=46649 bytes_read=101585 bytes_retransmit=9 bytes_invalid=0 send_seq=3260 receive_seq=3260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.25 cputime=106.309 memavail=710760 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.504
Stats 2183.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=46767 bytes_read=101942 bytes_retransmit=9 bytes_invalid=0 send_seq=3269 receive_seq=3269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.5  sysload=0.25 cputime=106.370 memavail=710760 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.504
Stats 2184.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=46901 bytes_read=102276 bytes_retransmit=9 bytes_invalid=0 send_seq=3279 receive_seq=3279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.25 cputime=106.433 memavail=710964 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.447
Stats 2185.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=47019 bytes_read=102620 bytes_retransmit=9 bytes_invalid=0 send_seq=3288 receive_seq=3288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.5  sysload=0.25 cputime=106.494 memavail=710228 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 2186.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=47137 bytes_read=102983 bytes_retransmit=9 bytes_invalid=0 send_seq=3297 receive_seq=3297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.6  sysload=0.25 cputime=106.558 memavail=710240 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 2187.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=47255 bytes_read=103302 bytes_retransmit=9 bytes_invalid=0 send_seq=3306 receive_seq=3306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.5  sysload=0.23 cputime=106.619 memavail=710752 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 2188.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=47373 bytes_read=103646 bytes_retransmit=9 bytes_invalid=0 send_seq=3315 receive_seq=3315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.4  sysload=0.23 cputime=106.681 memavail=710548 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.447
Stats 2189.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=47507 bytes_read=104008 bytes_retransmit=9 bytes_invalid=0 send_seq=3325 receive_seq=3325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.3  sysload=0.23 cputime=106.744 memavail=710816 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.458
Stats 2190.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=47625 bytes_read=104337 bytes_retransmit=9 bytes_invalid=0 send_seq=3334 receive_seq=3334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.3  sysload=0.23 cputime=106.804 memavail=711060 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.458
Stats 2191.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=47743 bytes_read=104696 bytes_retransmit=9 bytes_invalid=0 send_seq=3343 receive_seq=3343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.3  sysload=0.23 cputime=106.873 memavail=711384 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.458
Stats 2192.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=47861 bytes_read=105053 bytes_retransmit=9 bytes_invalid=0 send_seq=3352 receive_seq=3352 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.5  sysload=0.21 cputime=106.935 memavail=711832 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.458
Stats 2193.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=47995 bytes_read=105387 bytes_retransmit=9 bytes_invalid=0 send_seq=3362 receive_seq=3362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.5  sysload=0.21 cputime=106.995 memavail=711888 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.475
Stats 2194.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=48129 bytes_read=105750 bytes_retransmit=9 bytes_invalid=0 send_seq=3372 receive_seq=3372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996885 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.2  sysload=0.21 cputime=107.058 memavail=711644 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.539
Stats 2195.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=48247 bytes_read=106093 bytes_retransmit=9 bytes_invalid=0 send_seq=3381 receive_seq=3381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.4  sysload=0.21 cputime=107.118 memavail=711528 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.539
Stats 2196.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=48365 bytes_read=106437 bytes_retransmit=9 bytes_invalid=0 send_seq=3390 receive_seq=3390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996881 heater_bed: target=0 temp=32.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.5  sysload=0.21 cputime=107.179 memavail=711276 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.539
Stats 2197.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=48483 bytes_read=106795 bytes_retransmit=9 bytes_invalid=0 send_seq=3399 receive_seq=3399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996881 heater_bed: target=0 temp=32.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.4  sysload=0.19 cputime=107.241 memavail=711284 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.539
Stats 2198.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=48617 bytes_read=107143 bytes_retransmit=9 bytes_invalid=0 send_seq=3409 receive_seq=3409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=0 temp=32.9 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.3  sysload=0.19 cputime=107.302 memavail=711284 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.519
Stats 2199.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=48735 bytes_read=107472 bytes_retransmit=9 bytes_invalid=0 send_seq=3418 receive_seq=3418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996885 heater_bed: target=0 temp=32.9 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.3  sysload=0.19 cputime=107.363 memavail=711616 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.519
Stats 2200.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=48853 bytes_read=107830 bytes_retransmit=9 bytes_invalid=0 send_seq=3427 receive_seq=3427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=0 temp=32.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.19 cputime=107.425 memavail=712908 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.519
Stats 2201.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=48971 bytes_read=108188 bytes_retransmit=9 bytes_invalid=0 send_seq=3436 receive_seq=3436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=0 temp=32.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.19 cputime=107.487 memavail=713188 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.519
Stats 2202.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=49105 bytes_read=108522 bytes_retransmit=9 bytes_invalid=0 send_seq=3446 receive_seq=3446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=0 temp=32.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.3  sysload=0.17 cputime=107.548 memavail=713188 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.462
Stats 2203.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=49223 bytes_read=108880 bytes_retransmit=9 bytes_invalid=0 send_seq=3455 receive_seq=3455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=0 temp=32.8 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.1  sysload=0.17 cputime=107.611 memavail=713636 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.462
Stats 2204.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=49341 bytes_read=109223 bytes_retransmit=9 bytes_invalid=0 send_seq=3464 receive_seq=3464 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=0 temp=32.8 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.3  sysload=0.17 cputime=107.672 memavail=713392 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 2205.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=49459 bytes_read=109552 bytes_retransmit=9 bytes_invalid=0 send_seq=3473 receive_seq=3473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.3  sysload=0.17 cputime=107.734 memavail=713676 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.462
Stats 2206.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=49593 bytes_read=109930 bytes_retransmit=9 bytes_invalid=0 send_seq=3483 receive_seq=3483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.3  sysload=0.17 cputime=107.798 memavail=713248 print_time=300.125 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Adjust Right wedge. Then run ACCEPT, ADJUSTED, or ABORT
Use ADJUSTED if a significant screw adjustment is made
Stats 2207.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=50334 bytes_read=110328 bytes_retransmit=9 bytes_invalid=0 send_seq=3503 receive_seq=3503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996873 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.2  sysload=0.16 cputime=107.872 memavail=713200 print_time=331.705 buffer_time=3.857 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 2208.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=50466 bytes_read=110657 bytes_retransmit=9 bytes_invalid=0 send_seq=3512 receive_seq=3512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.3  sysload=0.16 cputime=107.935 memavail=713416 print_time=331.705 buffer_time=2.853 print_stall=0 extruder: target=200 temp=200.1 pwm=0.467
Stats 2209.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=50584 bytes_read=111029 bytes_retransmit=9 bytes_invalid=0 send_seq=3521 receive_seq=3521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996881 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.3  sysload=0.16 cputime=107.999 memavail=713164 print_time=331.705 buffer_time=1.850 print_stall=0 extruder: target=200 temp=200.0 pwm=0.467
Stats 2210.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=50718 bytes_read=111363 bytes_retransmit=9 bytes_invalid=0 send_seq=3531 receive_seq=3531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.5  sysload=0.16 cputime=108.061 memavail=713024 print_time=331.705 buffer_time=0.846 print_stall=0 extruder: target=200 temp=200.0 pwm=0.510
Stats 2211.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=50836 bytes_read=111721 bytes_retransmit=9 bytes_invalid=0 send_seq=3540 receive_seq=3540 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.5  sysload=0.16 cputime=108.125 memavail=712016 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.510
Stats 2212.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=50982 bytes_read=112071 bytes_retransmit=9 bytes_invalid=0 send_seq=3550 receive_seq=3550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.5  sysload=0.15 cputime=108.189 memavail=712276 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.510
Stats 2213.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=51100 bytes_read=112396 bytes_retransmit=9 bytes_invalid=0 send_seq=3559 receive_seq=3559 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.5  sysload=0.15 cputime=108.251 memavail=712276 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.510
Stats 2214.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=51234 bytes_read=112745 bytes_retransmit=9 bytes_invalid=0 send_seq=3569 receive_seq=3569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.3  sysload=0.15 cputime=108.313 memavail=712764 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.514
Stats 2215.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=51352 bytes_read=113102 bytes_retransmit=9 bytes_invalid=0 send_seq=3578 receive_seq=3578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996868 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.15 cputime=108.375 memavail=713116 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.514
Stats 2216.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=51470 bytes_read=113446 bytes_retransmit=9 bytes_invalid=0 send_seq=3587 receive_seq=3587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996868 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.6  sysload=0.15 cputime=108.436 memavail=712064 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.514
Stats 2217.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=51588 bytes_read=113790 bytes_retransmit=9 bytes_invalid=0 send_seq=3596 receive_seq=3596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996868 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.3  sysload=0.14 cputime=108.499 memavail=712120 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.514
Stats 2218.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=51706 bytes_read=114147 bytes_retransmit=9 bytes_invalid=0 send_seq=3605 receive_seq=3605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996866 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.6  sysload=0.14 cputime=108.562 memavail=712120 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.547
Stats 2219.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=51835 bytes_read=114476 bytes_retransmit=9 bytes_invalid=0 send_seq=3614 receive_seq=3614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=32.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.14 cputime=108.623 memavail=711616 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.547
Stats 2220.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=51959 bytes_read=114820 bytes_retransmit=9 bytes_invalid=0 send_seq=3624 receive_seq=3623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=32.5 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.7  sysload=0.14 cputime=108.685 memavail=710740 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.547
Stats 2221.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=52093 bytes_read=115213 bytes_retransmit=9 bytes_invalid=0 send_seq=3634 receive_seq=3634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=32.5  sysload=0.14 cputime=108.749 memavail=710236 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.495
Stats 2222.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=52211 bytes_read=115542 bytes_retransmit=9 bytes_invalid=0 send_seq=3643 receive_seq=3643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=32.5 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.6  sysload=0.12 cputime=108.810 memavail=710244 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 2223.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=52329 bytes_read=115886 bytes_retransmit=9 bytes_invalid=0 send_seq=3652 receive_seq=3652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=32.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.12 cputime=108.871 memavail=709920 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 2224.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=52456 bytes_read=116243 bytes_retransmit=9 bytes_invalid=0 send_seq=3662 receive_seq=3661 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996859 heater_bed: target=0 temp=32.5 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.6  sysload=0.12 cputime=108.934 memavail=710248 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 2225.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=52595 bytes_read=116582 bytes_retransmit=9 bytes_invalid=0 send_seq=3672 receive_seq=3672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=32.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=32.6  sysload=0.12 cputime=108.997 memavail=708824 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 2226.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=52713 bytes_read=116955 bytes_retransmit=9 bytes_invalid=0 send_seq=3681 receive_seq=3681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 heater_bed: target=0 temp=32.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.5  sysload=0.12 cputime=109.059 memavail=708660 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 2227.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=52831 bytes_read=117298 bytes_retransmit=9 bytes_invalid=0 send_seq=3690 receive_seq=3690 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996854 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=32.8  sysload=0.11 cputime=109.120 memavail=708660 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 2228.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=52949 bytes_read=117627 bytes_retransmit=9 bytes_invalid=0 send_seq=3699 receive_seq=3699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996853 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.11 cputime=109.181 memavail=708608 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 2229.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=53067 bytes_read=117985 bytes_retransmit=9 bytes_invalid=0 send_seq=3708 receive_seq=3708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996852 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.11 cputime=109.242 memavail=708668 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 2230.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=53196 bytes_read=118328 bytes_retransmit=9 bytes_invalid=0 send_seq=3717 receive_seq=3717 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996852 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=32.7  sysload=0.11 cputime=109.304 memavail=708772 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.511
Stats 2231.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=53330 bytes_read=118677 bytes_retransmit=9 bytes_invalid=0 send_seq=3727 receive_seq=3727 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996852 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.8  sysload=0.11 cputime=109.365 memavail=708520 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.583
Stats 2232.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=53448 bytes_read=119035 bytes_retransmit=9 bytes_invalid=0 send_seq=3736 receive_seq=3736 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996854 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.10 cputime=109.427 memavail=708764 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.583
Stats 2233.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=53577 bytes_read=119378 bytes_retransmit=9 bytes_invalid=0 send_seq=3745 receive_seq=3745 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.7  sysload=0.10 cputime=109.488 memavail=708620 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.530
Stats 2234.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=53695 bytes_read=119707 bytes_retransmit=9 bytes_invalid=0 send_seq=3754 receive_seq=3754 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=33.0  sysload=0.10 cputime=109.548 memavail=709056 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.530
Stats 2235.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=53829 bytes_read=120070 bytes_retransmit=9 bytes_invalid=0 send_seq=3764 receive_seq=3764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=32.8  sysload=0.10 cputime=109.617 memavail=710544 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.472
Stats 2236.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=53947 bytes_read=120428 bytes_retransmit=9 bytes_invalid=0 send_seq=3773 receive_seq=3773 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.10 cputime=109.686 memavail=710296 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.472
Stats 2237.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=54065 bytes_read=120750 bytes_retransmit=9 bytes_invalid=0 send_seq=3782 receive_seq=3782 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.10 cputime=109.747 memavail=710556 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.472
Stats 2238.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=54183 bytes_read=121112 bytes_retransmit=9 bytes_invalid=0 send_seq=3791 receive_seq=3791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.7  sysload=0.10 cputime=109.809 memavail=710556 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.472
Stats 2239.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=54317 bytes_read=121446 bytes_retransmit=9 bytes_invalid=0 send_seq=3801 receive_seq=3801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.10 cputime=109.871 memavail=710772 print_time=331.705 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.471
Adjust Left wedge. Then run ACCEPT, ADJUSTED, or ABORT
Use ADJUSTED if a significant screw adjustment is made
Stats 2240.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=54995 bytes_read=121825 bytes_retransmit=9 bytes_invalid=0 send_seq=3820 receive_seq=3820 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.1  sysload=0.10 cputime=109.943 memavail=712084 print_time=364.450 buffer_time=3.493 print_stall=0 extruder: target=200 temp=200.2 pwm=0.471
Stats 2241.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=55132 bytes_read=122212 bytes_retransmit=9 bytes_invalid=0 send_seq=3829 receive_seq=3829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=32.4 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.10 cputime=110.005 memavail=712336 print_time=364.450 buffer_time=2.490 print_stall=0 extruder: target=200 temp=200.2 pwm=0.471
Stats 2242.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=55250 bytes_read=122541 bytes_retransmit=9 bytes_invalid=0 send_seq=3838 receive_seq=3838 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.33 cputime=110.067 memavail=712352 print_time=364.450 buffer_time=1.487 print_stall=0 extruder: target=200 temp=200.2 pwm=0.471
Stats 2243.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=55384 bytes_read=122890 bytes_retransmit=9 bytes_invalid=0 send_seq=3848 receive_seq=3848 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.9  sysload=0.33 cputime=110.132 memavail=712352 print_time=364.450 buffer_time=0.479 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Stats 2244.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=55511 bytes_read=123252 bytes_retransmit=9 bytes_invalid=0 send_seq=3858 receive_seq=3858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.33 cputime=110.200 memavail=712352 print_time=364.450 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Adjust Front left screw. Then run ACCEPT, ADJUSTED, or ABORT
Use ADJUSTED if a significant screw adjustment is made
Stats 2245.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=56208 bytes_read=123636 bytes_retransmit=9 bytes_invalid=0 send_seq=3878 receive_seq=3878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.9  sysload=0.33 cputime=110.272 memavail=711488 print_time=369.615 buffer_time=3.642 print_stall=0 extruder: target=200 temp=200.0 pwm=0.486
Stats 2246.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=56407 bytes_read=124000 bytes_retransmit=9 bytes_invalid=0 send_seq=3888 receive_seq=3888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.33 cputime=110.335 memavail=711760 print_time=369.615 buffer_time=2.638 print_stall=0 extruder: target=200 temp=200.0 pwm=0.501
Stats 2247.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=56525 bytes_read=124357 bytes_retransmit=9 bytes_invalid=0 send_seq=3897 receive_seq=3897 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.30 cputime=110.399 memavail=711768 print_time=369.615 buffer_time=1.635 print_stall=0 extruder: target=200 temp=199.9 pwm=0.501
Stats 2248.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=56643 bytes_read=124686 bytes_retransmit=9 bytes_invalid=0 send_seq=3906 receive_seq=3906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=32.3 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.30 cputime=110.464 memavail=711988 print_time=369.615 buffer_time=0.631 print_stall=0 extruder: target=200 temp=199.9 pwm=0.501
Stats 2249.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=56761 bytes_read=125030 bytes_retransmit=9 bytes_invalid=0 send_seq=3915 receive_seq=3915 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.30 cputime=110.525 memavail=712024 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.501
Stats 2250.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=56907 bytes_read=125392 bytes_retransmit=9 bytes_invalid=0 send_seq=3925 receive_seq=3925 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.30 cputime=110.589 memavail=711632 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.484
Stats 2251.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=57036 bytes_read=125736 bytes_retransmit=9 bytes_invalid=0 send_seq=3934 receive_seq=3934 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.8  sysload=0.30 cputime=110.649 memavail=711384 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 2252.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=57154 bytes_read=126080 bytes_retransmit=9 bytes_invalid=0 send_seq=3943 receive_seq=3943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.7  sysload=0.28 cputime=110.711 memavail=712216 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 2253.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=57272 bytes_read=126437 bytes_retransmit=9 bytes_invalid=0 send_seq=3952 receive_seq=3952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.9  sysload=0.28 cputime=110.773 memavail=712280 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 2254.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=57390 bytes_read=126766 bytes_retransmit=9 bytes_invalid=0 send_seq=3961 receive_seq=3961 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.0  sysload=0.28 cputime=110.835 memavail=712284 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.484
Stats 2255.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=57524 bytes_read=127115 bytes_retransmit=9 bytes_invalid=0 send_seq=3971 receive_seq=3971 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.9  sysload=0.28 cputime=110.897 memavail=711412 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.463
Stats 2256.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=57642 bytes_read=127487 bytes_retransmit=9 bytes_invalid=0 send_seq=3980 receive_seq=3980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.7  sysload=0.28 cputime=110.960 memavail=711164 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.463
Stats 2257.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=57760 bytes_read=127816 bytes_retransmit=9 bytes_invalid=0 send_seq=3989 receive_seq=3989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.6  sysload=0.26 cputime=111.022 memavail=710660 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.463
Stats 2258.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=57878 bytes_read=128174 bytes_retransmit=9 bytes_invalid=0 send_seq=3998 receive_seq=3998 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.8  sysload=0.26 cputime=111.084 memavail=710664 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.463
Stats 2259.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=58012 bytes_read=128522 bytes_retransmit=9 bytes_invalid=0 send_seq=4008 receive_seq=4008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.8  sysload=0.26 cputime=111.144 memavail=711172 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.476
Stats 2260.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=58130 bytes_read=128851 bytes_retransmit=9 bytes_invalid=0 send_seq=4017 receive_seq=4017 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996852 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.26 cputime=111.205 memavail=710496 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 2261.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=58248 bytes_read=129224 bytes_retransmit=9 bytes_invalid=0 send_seq=4026 receive_seq=4026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996865 heater_bed: target=0 temp=32.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.9  sysload=0.26 cputime=111.267 memavail=711032 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 2262.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=58366 bytes_read=129564 bytes_retransmit=9 bytes_invalid=0 send_seq=4035 receive_seq=4035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.9  sysload=0.40 cputime=111.328 memavail=710840 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.476
Stats 2263.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=58500 bytes_read=129888 bytes_retransmit=9 bytes_invalid=0 send_seq=4045 receive_seq=4045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.40 cputime=111.389 memavail=710840 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 2264.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=58618 bytes_read=130241 bytes_retransmit=9 bytes_invalid=0 send_seq=4054 receive_seq=4054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.8  sysload=0.40 cputime=111.450 memavail=711044 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 2265.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=58736 bytes_read=130584 bytes_retransmit=9 bytes_invalid=0 send_seq=4063 receive_seq=4063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.40 cputime=111.511 memavail=711740 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.493
Stats 2266.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=58865 bytes_read=130928 bytes_retransmit=9 bytes_invalid=0 send_seq=4072 receive_seq=4072 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.40 cputime=111.571 memavail=711940 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.544
Stats 2267.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=59010 bytes_read=131305 bytes_retransmit=9 bytes_invalid=0 send_seq=4082 receive_seq=4082 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996857 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.44 cputime=111.634 memavail=711740 print_time=369.615 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.533
Adjust Rear left screw. Then run ACCEPT, ADJUSTED, or ABORT
Use ADJUSTED if a significant screw adjustment is made
Stats 2268.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=59634 bytes_read=131679 bytes_retransmit=9 bytes_invalid=0 send_seq=4100 receive_seq=4100 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.6  sysload=0.44 cputime=111.710 memavail=712028 print_time=393.978 buffer_time=4.926 print_stall=0 extruder: target=200 temp=199.9 pwm=0.533
Stats 2269.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=59768 bytes_read=132013 bytes_retransmit=9 bytes_invalid=0 send_seq=4110 receive_seq=4110 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996854 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.8  sysload=0.44 cputime=111.772 memavail=712228 print_time=393.978 buffer_time=3.922 print_stall=0 extruder: target=200 temp=199.9 pwm=0.465
Stats 2270.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=59886 bytes_read=132385 bytes_retransmit=9 bytes_invalid=0 send_seq=4119 receive_seq=4119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996853 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.8  sysload=0.44 cputime=111.835 memavail=711396 print_time=393.978 buffer_time=2.919 print_stall=0 extruder: target=200 temp=199.9 pwm=0.465
Stats 2271.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=60004 bytes_read=132729 bytes_retransmit=9 bytes_invalid=0 send_seq=4128 receive_seq=4128 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.8  sysload=0.44 cputime=111.896 memavail=711396 print_time=393.978 buffer_time=1.916 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 2272.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=60122 bytes_read=133073 bytes_retransmit=9 bytes_invalid=0 send_seq=4137 receive_seq=4137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=32.1 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.7  sysload=0.57 cputime=111.957 memavail=711400 print_time=393.978 buffer_time=0.911 print_stall=0 extruder: target=200 temp=200.0 pwm=0.465
Stats 2273.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=60240 bytes_read=133430 bytes_retransmit=9 bytes_invalid=0 send_seq=4146 receive_seq=4146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.57 cputime=112.018 memavail=710908 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 2274.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=60403 bytes_read=133780 bytes_retransmit=9 bytes_invalid=0 send_seq=4157 receive_seq=4157 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.9  sysload=0.57 cputime=112.081 memavail=710940 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 2275.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=60521 bytes_read=134124 bytes_retransmit=9 bytes_invalid=0 send_seq=4166 receive_seq=4166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.57 cputime=112.143 memavail=710100 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 2276.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=60639 bytes_read=134496 bytes_retransmit=9 bytes_invalid=0 send_seq=4175 receive_seq=4175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.9  sysload=0.57 cputime=112.204 memavail=710352 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 2277.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=60757 bytes_read=134825 bytes_retransmit=9 bytes_invalid=0 send_seq=4184 receive_seq=4184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.52 cputime=112.265 memavail=710104 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.465
Stats 2278.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=60891 bytes_read=135174 bytes_retransmit=9 bytes_invalid=0 send_seq=4194 receive_seq=4194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=33.1  sysload=0.52 cputime=112.328 memavail=709612 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.498
Stats 2279.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=61009 bytes_read=135531 bytes_retransmit=9 bytes_invalid=0 send_seq=4203 receive_seq=4203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.52 cputime=112.391 memavail=709872 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.498
Stats 2280.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=61127 bytes_read=135860 bytes_retransmit=9 bytes_invalid=0 send_seq=4212 receive_seq=4212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.52 cputime=112.453 memavail=710680 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.498
Stats 2281.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=61245 bytes_read=136219 bytes_retransmit=9 bytes_invalid=0 send_seq=4221 receive_seq=4221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=32.0 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.1  sysload=0.52 cputime=112.515 memavail=710936 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.498
Stats 2282.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=61379 bytes_read=136581 bytes_retransmit=9 bytes_invalid=0 send_seq=4231 receive_seq=4231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.48 cputime=112.576 memavail=711220 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.500
Stats 2283.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=61497 bytes_read=136910 bytes_retransmit=9 bytes_invalid=0 send_seq=4240 receive_seq=4240 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.48 cputime=112.639 memavail=710976 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.500
Stats 2284.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=61615 bytes_read=137254 bytes_retransmit=9 bytes_invalid=0 send_seq=4249 receive_seq=4249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996857 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=33.0  sysload=0.48 cputime=112.700 memavail=710476 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.500
Stats 2285.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=61733 bytes_read=137611 bytes_retransmit=9 bytes_invalid=0 send_seq=4258 receive_seq=4258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.2  sysload=0.48 cputime=112.762 memavail=711368 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.500
Stats 2286.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=61867 bytes_read=137960 bytes_retransmit=9 bytes_invalid=0 send_seq=4268 receive_seq=4268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=33.1  sysload=0.48 cputime=112.825 memavail=711152 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 2287.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=61985 bytes_read=138318 bytes_retransmit=9 bytes_invalid=0 send_seq=4277 receive_seq=4277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=33.1  sysload=0.44 cputime=112.887 memavail=711152 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.493
Stats 2288.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=62103 bytes_read=138651 bytes_retransmit=9 bytes_invalid=0 send_seq=4286 receive_seq=4286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.44 cputime=112.952 memavail=711168 print_time=393.978 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 2289.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=62580 bytes_read=139153 bytes_retransmit=9 bytes_invalid=0 send_seq=4316 receive_seq=4316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=31.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=33.1  sysload=0.44 cputime=113.034 memavail=711168 print_time=410.309 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.493
Stats 2290.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=63361 bytes_read=139913 bytes_retransmit=9 bytes_invalid=0 send_seq=4363 receive_seq=4362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.0  sysload=0.44 cputime=113.138 memavail=710592 print_time=411.297 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 2291.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=63866 bytes_read=140566 bytes_retransmit=9 bytes_invalid=0 send_seq=4402 receive_seq=4402 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=31.9 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=33.1  sysload=0.41 cputime=113.221 memavail=711096 print_time=412.297 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.495
Stats 2292.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=64359 bytes_read=141180 bytes_retransmit=9 bytes_invalid=0 send_seq=4440 receive_seq=4440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996836 heater_bed: target=0 temp=31.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=33.2  sysload=0.41 cputime=113.301 memavail=711096 print_time=413.297 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 2293.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=64857 bytes_read=141828 bytes_retransmit=9 bytes_invalid=0 send_seq=4479 receive_seq=4479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996837 heater_bed: target=0 temp=31.8 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=33.1  sysload=0.41 cputime=113.384 memavail=711356 print_time=414.297 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.495
Stats 2294.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=65366 bytes_read=142461 bytes_retransmit=9 bytes_invalid=0 send_seq=4518 receive_seq=4518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996837 heater_bed: target=0 temp=31.8 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=33.1  sysload=0.41 cputime=113.465 memavail=711356 print_time=415.297 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 2295.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=66393 bytes_read=143324 bytes_retransmit=9 bytes_invalid=0 send_seq=4575 receive_seq=4575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=31.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=33.1  sysload=0.41 cputime=113.586 memavail=711252 print_time=417.437 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 2296.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=66549 bytes_read=143697 bytes_retransmit=9 bytes_invalid=0 send_seq=4584 receive_seq=4584 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=31.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=32.9  sysload=0.37 cputime=113.648 memavail=711508 print_time=417.437 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 2297.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=67005 bytes_read=144272 bytes_retransmit=9 bytes_invalid=0 send_seq=4617 receive_seq=4617 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996834 heater_bed: target=0 temp=31.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.37 cputime=113.728 memavail=711636 print_time=418.337 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 2298.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=67471 bytes_read=144886 bytes_retransmit=9 bytes_invalid=0 send_seq=4655 receive_seq=4655 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996830 heater_bed: target=0 temp=31.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.37 cputime=113.808 memavail=711388 print_time=419.287 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.479
Stats 2299.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=67774 bytes_read=145428 bytes_retransmit=9 bytes_invalid=0 send_seq=4680 receive_seq=4680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996831 heater_bed: target=0 temp=31.7 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.37 cputime=113.886 memavail=711396 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.498
Stats 2300.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000005 bytes_write=67920 bytes_read=145776 bytes_retransmit=9 bytes_invalid=0 send_seq=4690 receive_seq=4690 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996831 heater_bed: target=0 temp=31.7 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.1  sysload=0.37 cputime=113.949 memavail=711396 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.1 pwm=0.498
Stats 2301.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68051 bytes_read=146125 bytes_retransmit=9 bytes_invalid=0 send_seq=4700 receive_seq=4700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=31.8 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.34 cputime=114.010 memavail=711648 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.1 pwm=0.000
Stats 2302.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68169 bytes_read=146497 bytes_retransmit=9 bytes_invalid=0 send_seq=4709 receive_seq=4709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=31.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.34 cputime=114.073 memavail=712180 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.0 pwm=0.000
Stats 2303.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68287 bytes_read=146826 bytes_retransmit=9 bytes_invalid=0 send_seq=4718 receive_seq=4718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=31.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.34 cputime=114.133 memavail=711676 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.9 pwm=0.000
Stats 2304.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68405 bytes_read=147170 bytes_retransmit=9 bytes_invalid=0 send_seq=4727 receive_seq=4727 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996837 heater_bed: target=0 temp=31.7 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.34 cputime=114.194 memavail=711940 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.6 pwm=0.000
Stats 2305.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68532 bytes_read=147532 bytes_retransmit=9 bytes_invalid=0 send_seq=4737 receive_seq=4737 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=31.7 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.9  sysload=0.34 cputime=114.256 memavail=711688 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.1 pwm=0.000
Stats 2306.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=68657 bytes_read=147876 bytes_retransmit=9 bytes_invalid=0 send_seq=4746 receive_seq=4746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=31.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.40 cputime=114.317 memavail=711700 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.5 pwm=0.000
Stats 2307.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=68784 bytes_read=148220 bytes_retransmit=9 bytes_invalid=0 send_seq=4756 receive_seq=4755 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.0  sysload=0.40 cputime=114.379 memavail=711980 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.0 pwm=0.000
Stats 2308.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=68907 bytes_read=148582 bytes_retransmit=9 bytes_invalid=0 send_seq=4765 receive_seq=4765 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.0  sysload=0.40 cputime=114.441 memavail=711476 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.0 pwm=0.000
Stats 2309.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=69039 bytes_read=148916 bytes_retransmit=9 bytes_invalid=0 send_seq=4775 receive_seq=4775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=33.0  sysload=0.40 cputime=114.504 memavail=711484 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.2 pwm=0.000
Stats 2310.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=69171 bytes_read=149265 bytes_retransmit=9 bytes_invalid=0 send_seq=4785 receive_seq=4785 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.40 cputime=114.565 memavail=711764 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.4 pwm=0.000
Stats 2311.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=69303 bytes_read=149642 bytes_retransmit=9 bytes_invalid=0 send_seq=4795 receive_seq=4795 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=33.1  sysload=0.36 cputime=114.628 memavail=712044 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.3 pwm=0.000
Stats 2312.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=69430 bytes_read=149971 bytes_retransmit=9 bytes_invalid=0 send_seq=4805 receive_seq=4804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.0  sysload=0.36 cputime=114.689 memavail=712048 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.3 pwm=0.000
Stats 2314.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=69567 bytes_read=150323 bytes_retransmit=9 bytes_invalid=0 send_seq=4815 receive_seq=4815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.0  sysload=0.36 cputime=114.751 memavail=711796 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.4 pwm=0.000
Stats 2315.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=69694 bytes_read=150673 bytes_retransmit=9 bytes_invalid=0 send_seq=4825 receive_seq=4825 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.1  sysload=0.36 cputime=114.813 memavail=711832 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.2 pwm=0.000
Stats 2316.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=69826 bytes_read=151003 bytes_retransmit=9 bytes_invalid=0 send_seq=4835 receive_seq=4835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=31.6 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=33.0  sysload=0.36 cputime=114.875 memavail=711660 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.2 pwm=0.000
Stats 2317.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=69963 bytes_read=151367 bytes_retransmit=9 bytes_invalid=0 send_seq=4845 receive_seq=4845 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996854 heater_bed: target=0 temp=31.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.34 cputime=114.936 memavail=711660 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.1 pwm=0.000
Stats 2318.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=70097 bytes_read=151729 bytes_retransmit=9 bytes_invalid=0 send_seq=4855 receive_seq=4855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996854 heater_bed: target=0 temp=31.5 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.34 cputime=114.998 memavail=711412 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.8 pwm=0.000
Stats 2319.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=70229 bytes_read=152063 bytes_retransmit=9 bytes_invalid=0 send_seq=4865 receive_seq=4865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996852 heater_bed: target=0 temp=31.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.34 cputime=115.065 memavail=711160 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.8 pwm=0.000
Stats 2320.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=70361 bytes_read=152412 bytes_retransmit=9 bytes_invalid=0 send_seq=4875 receive_seq=4875 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=31.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.34 cputime=115.128 memavail=710916 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.8 pwm=0.000
Stats 2321.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=70502 bytes_read=152774 bytes_retransmit=9 bytes_invalid=0 send_seq=4886 receive_seq=4885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=31.5 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.2  sysload=0.34 cputime=115.191 memavail=711728 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.4 pwm=0.000
Stats 2322.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=70648 bytes_read=153133 bytes_retransmit=9 bytes_invalid=0 send_seq=4897 receive_seq=4897 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=31.5 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.9  sysload=0.31 cputime=115.254 memavail=711728 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.3 pwm=0.000
Stats 2323.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=70785 bytes_read=153496 bytes_retransmit=9 bytes_invalid=0 send_seq=4907 receive_seq=4907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=31.5 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.1  sysload=0.31 cputime=115.322 memavail=712036 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.3 pwm=0.000
Stats 2324.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=70917 bytes_read=153844 bytes_retransmit=9 bytes_invalid=0 send_seq=4917 receive_seq=4917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=31.5 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=33.0  sysload=0.31 cputime=115.383 memavail=712036 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.0 pwm=0.000
Stats 2325.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=71049 bytes_read=154178 bytes_retransmit=9 bytes_invalid=0 send_seq=4927 receive_seq=4927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=31.4 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.1  sysload=0.31 cputime=115.447 memavail=712296 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.9 pwm=0.000
Stats 2326.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=71181 bytes_read=154541 bytes_retransmit=9 bytes_invalid=0 send_seq=4937 receive_seq=4937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=31.4 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.31 cputime=115.511 memavail=713320 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.9 pwm=0.000
Stats 2327.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=71324 bytes_read=154909 bytes_retransmit=9 bytes_invalid=0 send_seq=4948 receive_seq=4948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=31.4 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.0  sysload=0.28 cputime=115.576 memavail=713068 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.5 pwm=0.000
Stats 2328.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=71461 bytes_read=155248 bytes_retransmit=9 bytes_invalid=0 send_seq=4959 receive_seq=4959 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996891 heater_bed: target=0 temp=31.4 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.2  sysload=0.28 cputime=115.638 memavail=712816 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.5 pwm=0.000
Stats 2329.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=71599 bytes_read=155622 bytes_retransmit=9 bytes_invalid=0 send_seq=4970 receive_seq=4969 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996972 heater_bed: target=0 temp=31.4 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.2  sysload=0.28 cputime=115.700 memavail=712572 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.5 pwm=0.000
Stats 2330.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=71731 bytes_read=155975 bytes_retransmit=9 bytes_invalid=0 send_seq=4980 receive_seq=4980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996962 heater_bed: target=0 temp=31.4 pwm=0.000 raspberry_pi: temp=42.2 mcu_temp: temp=33.1  sysload=0.28 cputime=115.766 memavail=712080 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.1 pwm=0.000
Stats 2331.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=71863 bytes_read=156309 bytes_retransmit=9 bytes_invalid=0 send_seq=4990 receive_seq=4990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996953 heater_bed: target=0 temp=31.4 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.0  sysload=0.28 cputime=115.829 memavail=711680 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.1 pwm=0.000
Stats 2332.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=72000 bytes_read=156687 bytes_retransmit=9 bytes_invalid=0 send_seq=5000 receive_seq=5000 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=0 temp=31.4 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.1  sysload=0.26 cputime=115.893 memavail=711680 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.1 pwm=0.000
Stats 2333.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=72132 bytes_read=157035 bytes_retransmit=9 bytes_invalid=0 send_seq=5010 receive_seq=5010 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996935 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.26 cputime=115.955 memavail=711680 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.8 pwm=0.000
Stats 2334.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=72264 bytes_read=157369 bytes_retransmit=9 bytes_invalid=0 send_seq=5020 receive_seq=5020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.1  sysload=0.26 cputime=116.017 memavail=711680 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.8 pwm=0.000
Stats 2335.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=72396 bytes_read=157746 bytes_retransmit=9 bytes_invalid=0 send_seq=5030 receive_seq=5030 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.1  sysload=0.26 cputime=116.082 memavail=711440 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.5 pwm=0.000
Stats 2336.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=72539 bytes_read=158085 bytes_retransmit=9 bytes_invalid=0 send_seq=5041 receive_seq=5041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.1  sysload=0.26 cputime=116.145 memavail=710844 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.5 pwm=0.000
Stats 2337.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=72671 bytes_read=158449 bytes_retransmit=9 bytes_invalid=0 send_seq=5051 receive_seq=5051 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996913 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.3  sysload=0.24 cputime=116.207 memavail=710920 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.5 pwm=0.000
Stats 2338.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=72803 bytes_read=158806 bytes_retransmit=9 bytes_invalid=0 send_seq=5061 receive_seq=5060 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.24 cputime=116.268 memavail=710924 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.2 pwm=0.000
Stats 2339.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=72935 bytes_read=159140 bytes_retransmit=9 bytes_invalid=0 send_seq=5071 receive_seq=5070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996901 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.24 cputime=116.330 memavail=710952 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.3 pwm=0.000
Stats 2340.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=73072 bytes_read=159486 bytes_retransmit=9 bytes_invalid=0 send_seq=5081 receive_seq=5081 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.1  sysload=0.24 cputime=116.392 memavail=711044 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.4 pwm=0.000
Stats 2341.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=73204 bytes_read=159839 bytes_retransmit=9 bytes_invalid=0 send_seq=5091 receive_seq=5091 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=31.3 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.0  sysload=0.24 cputime=116.454 memavail=711972 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.1 pwm=0.000
Stats 2342.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=73336 bytes_read=160188 bytes_retransmit=9 bytes_invalid=0 send_seq=5101 receive_seq=5101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996888 heater_bed: target=0 temp=31.2 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.8  sysload=0.22 cputime=116.514 memavail=711720 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.1 pwm=0.000
Stats 2343.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=73468 bytes_read=160537 bytes_retransmit=9 bytes_invalid=0 send_seq=5111 receive_seq=5111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=0 temp=31.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.22 cputime=116.575 memavail=712036 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.2 pwm=0.000
Stats 2344.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=73600 bytes_read=160899 bytes_retransmit=9 bytes_invalid=0 send_seq=5121 receive_seq=5121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=0 temp=31.2 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.22 cputime=116.637 memavail=712632 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.0 pwm=0.000
Stats 2345.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=73734 bytes_read=161233 bytes_retransmit=9 bytes_invalid=0 send_seq=5131 receive_seq=5131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=0 temp=31.2 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.0  sysload=0.22 cputime=116.698 memavail=712152 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.1 pwm=0.000
Stats 2346.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=73866 bytes_read=161582 bytes_retransmit=9 bytes_invalid=0 send_seq=5141 receive_seq=5141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996867 heater_bed: target=0 temp=31.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.22 cputime=116.761 memavail=712164 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.2 pwm=0.000
Stats 2347.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=73998 bytes_read=161959 bytes_retransmit=9 bytes_invalid=0 send_seq=5151 receive_seq=5151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=31.2 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.9  sysload=0.20 cputime=116.823 memavail=712164 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.0 pwm=0.000
Stats 2348.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=74130 bytes_read=162293 bytes_retransmit=9 bytes_invalid=0 send_seq=5161 receive_seq=5161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=33.0  sysload=0.20 cputime=116.884 memavail=711912 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.1 pwm=0.000
Stats 2349.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=74262 bytes_read=162642 bytes_retransmit=9 bytes_invalid=0 send_seq=5171 receive_seq=5171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996853 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.1  sysload=0.20 cputime=116.945 memavail=711940 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.3 pwm=0.000
Stats 2350.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=74394 bytes_read=163004 bytes_retransmit=9 bytes_invalid=0 send_seq=5181 receive_seq=5181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.20 cputime=117.007 memavail=712268 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.1 pwm=0.000
Stats 2351.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=74526 bytes_read=163338 bytes_retransmit=9 bytes_invalid=0 send_seq=5191 receive_seq=5191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=33.1  sysload=0.20 cputime=117.067 memavail=712296 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.2 pwm=0.000
Stats 2352.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=74658 bytes_read=163716 bytes_retransmit=9 bytes_invalid=0 send_seq=5201 receive_seq=5201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=33.0  sysload=0.18 cputime=117.129 memavail=712548 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.3 pwm=0.000
Stats 2353.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=74790 bytes_read=164064 bytes_retransmit=9 bytes_invalid=0 send_seq=5211 receive_seq=5211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.0  sysload=0.18 cputime=117.191 memavail=712800 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.2 pwm=0.000
Stats 2354.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=74917 bytes_read=164393 bytes_retransmit=9 bytes_invalid=0 send_seq=5221 receive_seq=5220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.8  sysload=0.18 cputime=117.252 memavail=712804 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.4 pwm=0.000
Stats 2355.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=75056 bytes_read=164761 bytes_retransmit=9 bytes_invalid=0 send_seq=5231 receive_seq=5231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.18 cputime=117.314 memavail=713004 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.5 pwm=0.000
Stats 2356.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=75183 bytes_read=165109 bytes_retransmit=9 bytes_invalid=0 send_seq=5241 receive_seq=5241 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.18 cputime=117.378 memavail=713064 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.5 pwm=0.000
Stats 2357.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=75315 bytes_read=165453 bytes_retransmit=9 bytes_invalid=0 send_seq=5251 receive_seq=5250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=33.1  sysload=0.17 cputime=117.439 memavail=713064 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.7 pwm=0.000
Stats 2358.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=75447 bytes_read=165821 bytes_retransmit=9 bytes_invalid=0 send_seq=5261 receive_seq=5261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=33.0  sysload=0.17 cputime=117.501 memavail=713264 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.9 pwm=0.000
Stats 2359.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=75579 bytes_read=166164 bytes_retransmit=9 bytes_invalid=0 send_seq=5271 receive_seq=5270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=31.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.17 cputime=117.562 memavail=713068 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.8 pwm=0.000
Stats 2360.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=75702 bytes_read=166498 bytes_retransmit=9 bytes_invalid=0 send_seq=5280 receive_seq=5280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996836 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.17 cputime=117.622 memavail=713824 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.0 pwm=0.000
Stats 2361.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=75834 bytes_read=166861 bytes_retransmit=9 bytes_invalid=0 send_seq=5290 receive_seq=5290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=33.0  sysload=0.17 cputime=117.686 memavail=714340 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.2 pwm=0.000
Stats 2362.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=75966 bytes_read=167224 bytes_retransmit=9 bytes_invalid=0 send_seq=5300 receive_seq=5300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.16 cputime=117.747 memavail=714540 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.1 pwm=0.000
Stats 2363.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=76098 bytes_read=167558 bytes_retransmit=9 bytes_invalid=0 send_seq=5310 receive_seq=5310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=32.9  sysload=0.16 cputime=117.808 memavail=714844 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.3 pwm=0.000
Stats 2364.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=76230 bytes_read=167921 bytes_retransmit=9 bytes_invalid=0 send_seq=5320 receive_seq=5320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996836 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.8  sysload=0.16 cputime=117.871 memavail=714844 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.3 pwm=0.000
Stats 2365.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=76357 bytes_read=168266 bytes_retransmit=9 bytes_invalid=0 send_seq=5330 receive_seq=5330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996833 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.1  sysload=0.16 cputime=117.932 memavail=714844 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.5 pwm=0.000
Stats 2366.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=76489 bytes_read=168585 bytes_retransmit=9 bytes_invalid=0 send_seq=5340 receive_seq=5339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996831 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.9  sysload=0.16 cputime=117.995 memavail=714852 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.8 pwm=0.000
Stats 2367.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=76623 bytes_read=168978 bytes_retransmit=9 bytes_invalid=0 send_seq=5350 receive_seq=5350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996829 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.8  sysload=0.14 cputime=118.058 memavail=714852 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.7 pwm=0.000
Stats 2368.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=76746 bytes_read=169307 bytes_retransmit=9 bytes_invalid=0 send_seq=5359 receive_seq=5359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996828 heater_bed: target=0 temp=31.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.14 cputime=118.118 memavail=714852 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.0 pwm=0.000
Stats 2369.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=76878 bytes_read=169656 bytes_retransmit=9 bytes_invalid=0 send_seq=5369 receive_seq=5369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=0 temp=30.9 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.8  sysload=0.14 cputime=118.181 memavail=714856 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.3 pwm=0.000
Stats 2370.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=77010 bytes_read=170018 bytes_retransmit=9 bytes_invalid=0 send_seq=5379 receive_seq=5379 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996830 heater_bed: target=0 temp=30.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.14 cputime=118.242 memavail=713932 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.3 pwm=0.000
Stats 2371.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=77137 bytes_read=170352 bytes_retransmit=9 bytes_invalid=0 send_seq=5389 receive_seq=5389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996828 heater_bed: target=0 temp=30.9 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.14 cputime=118.305 memavail=713692 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.6 pwm=0.000
Stats 2372.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=77269 bytes_read=170711 bytes_retransmit=9 bytes_invalid=0 send_seq=5399 receive_seq=5398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996825 heater_bed: target=0 temp=30.9 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.13 cputime=118.368 memavail=712108 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.8 pwm=0.000
Stats 2373.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=77401 bytes_read=171073 bytes_retransmit=9 bytes_invalid=0 send_seq=5409 receive_seq=5408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996823 heater_bed: target=0 temp=30.9 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.13 cputime=118.431 memavail=712136 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.9 pwm=0.000
Stats 2374.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=77524 bytes_read=171407 bytes_retransmit=9 bytes_invalid=0 send_seq=5418 receive_seq=5418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996821 heater_bed: target=0 temp=30.9 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=32.9  sysload=0.13 cputime=118.492 memavail=712144 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.2 pwm=0.000
Stats 2375.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=77656 bytes_read=171756 bytes_retransmit=9 bytes_invalid=0 send_seq=5428 receive_seq=5428 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996819 heater_bed: target=0 temp=30.9 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=32.9  sysload=0.13 cputime=118.554 memavail=713208 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.5 pwm=0.000
Stats 2376.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=77783 bytes_read=172113 bytes_retransmit=9 bytes_invalid=0 send_seq=5438 receive_seq=5437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996817 heater_bed: target=0 temp=30.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.13 cputime=118.617 memavail=712972 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.5 pwm=0.000
Stats 2377.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=77915 bytes_read=172467 bytes_retransmit=9 bytes_invalid=0 send_seq=5448 receive_seq=5448 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996815 heater_bed: target=0 temp=30.8 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.20 cputime=118.679 memavail=713100 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.8 pwm=0.000
Stats 2378.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=78038 bytes_read=172811 bytes_retransmit=9 bytes_invalid=0 send_seq=5457 receive_seq=5457 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996814 heater_bed: target=0 temp=30.8 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=32.9  sysload=0.20 cputime=118.740 memavail=712852 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.1 pwm=0.000
Stats 2379.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=78172 bytes_read=173175 bytes_retransmit=9 bytes_invalid=0 send_seq=5467 receive_seq=5467 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996812 heater_bed: target=0 temp=30.8 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.20 cputime=118.802 memavail=713412 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.2 pwm=0.000
Stats 2380.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=78299 bytes_read=173512 bytes_retransmit=9 bytes_invalid=0 send_seq=5477 receive_seq=5477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996811 heater_bed: target=0 temp=30.8 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.6  sysload=0.20 cputime=118.863 memavail=713956 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.5 pwm=0.000
Stats 2381.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=78431 bytes_read=173859 bytes_retransmit=9 bytes_invalid=0 send_seq=5487 receive_seq=5486 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996809 heater_bed: target=0 temp=30.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.20 cputime=118.927 memavail=714592 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.8 pwm=0.000
Stats 2382.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=78569 bytes_read=174256 bytes_retransmit=9 bytes_invalid=0 send_seq=5498 receive_seq=5497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996810 heater_bed: target=0 temp=30.8 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.7  sysload=0.18 cputime=118.991 memavail=714644 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.9 pwm=0.000
Stats 2383.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=78692 bytes_read=174593 bytes_retransmit=9 bytes_invalid=0 send_seq=5507 receive_seq=5507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996809 heater_bed: target=0 temp=30.7 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.0  sysload=0.18 cputime=119.052 memavail=714392 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.3 pwm=0.000
Stats 2384.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=78824 bytes_read=174959 bytes_retransmit=9 bytes_invalid=0 send_seq=5517 receive_seq=5517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996808 heater_bed: target=0 temp=30.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.18 cputime=119.114 memavail=714648 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.6 pwm=0.000
Stats 2385.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=78951 bytes_read=175306 bytes_retransmit=9 bytes_invalid=0 send_seq=5527 receive_seq=5526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996808 heater_bed: target=0 temp=30.7 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.8  sysload=0.18 cputime=119.176 memavail=713516 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.7 pwm=0.000
Stats 2386.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=79074 bytes_read=175643 bytes_retransmit=9 bytes_invalid=0 send_seq=5536 receive_seq=5536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996819 heater_bed: target=0 temp=30.7 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.18 cputime=119.240 memavail=714880 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.1 pwm=0.000
Stats 2387.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=79206 bytes_read=176024 bytes_retransmit=9 bytes_invalid=0 send_seq=5546 receive_seq=5546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996817 heater_bed: target=0 temp=30.7 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.9  sysload=0.25 cputime=119.303 memavail=714880 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.4 pwm=0.000
Stats 2388.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=79338 bytes_read=176376 bytes_retransmit=9 bytes_invalid=0 send_seq=5556 receive_seq=5556 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996816 heater_bed: target=0 temp=30.7 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.8  sysload=0.25 cputime=119.365 memavail=714908 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.5 pwm=0.000
Stats 2389.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=79465 bytes_read=176708 bytes_retransmit=9 bytes_invalid=0 send_seq=5566 receive_seq=5565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996814 heater_bed: target=0 temp=30.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.25 cputime=119.427 memavail=715160 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.9 pwm=0.000
Stats 2390.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=79588 bytes_read=177074 bytes_retransmit=9 bytes_invalid=0 send_seq=5575 receive_seq=5575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996814 heater_bed: target=0 temp=30.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.25 cputime=119.488 memavail=715388 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.3 pwm=0.000
Stats 2391.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=79720 bytes_read=177416 bytes_retransmit=9 bytes_invalid=0 send_seq=5585 receive_seq=5585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996815 heater_bed: target=0 temp=30.7 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.8  sysload=0.25 cputime=119.550 memavail=715188 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.4 pwm=0.000
Stats 2392.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=79847 bytes_read=177754 bytes_retransmit=9 bytes_invalid=0 send_seq=5595 receive_seq=5594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996814 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.8  sysload=0.23 cputime=119.612 memavail=715400 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.8 pwm=0.000
Stats 2393.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=79972 bytes_read=178120 bytes_retransmit=9 bytes_invalid=0 send_seq=5604 receive_seq=5604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996814 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.23 cputime=119.678 memavail=715956 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.2 pwm=0.000
Stats 2394.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=80104 bytes_read=178472 bytes_retransmit=9 bytes_invalid=0 send_seq=5614 receive_seq=5614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996815 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.7  sysload=0.23 cputime=119.740 memavail=716236 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.3 pwm=0.000
Stats 2395.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=80231 bytes_read=178804 bytes_retransmit=9 bytes_invalid=0 send_seq=5624 receive_seq=5623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996814 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.23 cputime=119.802 memavail=715800 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.7 pwm=0.000
Stats 2396.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=80354 bytes_read=179185 bytes_retransmit=9 bytes_invalid=0 send_seq=5633 receive_seq=5633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996814 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.23 cputime=119.864 memavail=715324 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.9 pwm=0.000
Stats 2397.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=80486 bytes_read=179537 bytes_retransmit=9 bytes_invalid=0 send_seq=5643 receive_seq=5643 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996815 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.7  sysload=0.21 cputime=119.928 memavail=715332 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.3 pwm=0.000
Stats 2398.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=80613 bytes_read=179869 bytes_retransmit=9 bytes_invalid=0 send_seq=5653 receive_seq=5652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996816 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.21 cputime=119.989 memavail=715584 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.7 pwm=0.000
Stats 2399.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=80745 bytes_read=180255 bytes_retransmit=9 bytes_invalid=0 send_seq=5663 receive_seq=5663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996815 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.7  sysload=0.21 cputime=120.052 memavail=715784 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.9 pwm=0.000
Stats 2400.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=80868 bytes_read=180587 bytes_retransmit=9 bytes_invalid=0 send_seq=5672 receive_seq=5672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996817 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.7  sysload=0.21 cputime=120.112 memavail=715208 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.3 pwm=0.000
Stats 2401.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=81000 bytes_read=180939 bytes_retransmit=9 bytes_invalid=0 send_seq=5682 receive_seq=5682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996817 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.21 cputime=120.177 memavail=715456 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.7 pwm=0.000
Stats 2402.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=81127 bytes_read=181320 bytes_retransmit=9 bytes_invalid=0 send_seq=5692 receive_seq=5692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996818 heater_bed: target=0 temp=30.6 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.7  sysload=0.19 cputime=120.244 memavail=714968 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.9 pwm=0.000
Stats 2403.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=81255 bytes_read=181657 bytes_retransmit=9 bytes_invalid=0 send_seq=5702 receive_seq=5702 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996818 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.19 cputime=120.304 memavail=715220 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.4 pwm=0.000
Stats 2404.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=81387 bytes_read=182009 bytes_retransmit=9 bytes_invalid=0 send_seq=5712 receive_seq=5712 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996817 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.19 cputime=120.365 memavail=715472 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.8 pwm=0.000
Stats 2405.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=81514 bytes_read=182375 bytes_retransmit=9 bytes_invalid=0 send_seq=5722 receive_seq=5722 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996818 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.19 cputime=120.426 memavail=714368 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.0 pwm=0.000
Stats 2406.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=81637 bytes_read=182707 bytes_retransmit=9 bytes_invalid=0 send_seq=5731 receive_seq=5731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996818 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.19 cputime=120.490 memavail=714632 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.4 pwm=0.000
Stats 2407.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=81764 bytes_read=183069 bytes_retransmit=9 bytes_invalid=0 send_seq=5741 receive_seq=5740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996817 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.18 cputime=120.552 memavail=714640 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.9 pwm=0.000
Stats 2408.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=81898 bytes_read=183435 bytes_retransmit=9 bytes_invalid=0 send_seq=5750 receive_seq=5750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996816 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.18 cputime=120.614 memavail=714644 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.2 pwm=0.000
Stats 2409.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=82048 bytes_read=183777 bytes_retransmit=9 bytes_invalid=0 send_seq=5761 receive_seq=5761 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996816 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.18 cputime=120.676 memavail=714644 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.6 pwm=0.000
Stats 2410.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=82180 bytes_read=184124 bytes_retransmit=9 bytes_invalid=0 send_seq=5771 receive_seq=5770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996816 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.18 cputime=120.738 memavail=716416 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.0 pwm=0.000
Stats 2411.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=82303 bytes_read=184490 bytes_retransmit=9 bytes_invalid=0 send_seq=5780 receive_seq=5780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996817 heater_bed: target=0 temp=30.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.18 cputime=120.799 memavail=716224 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.3 pwm=0.000
Stats 2412.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=82430 bytes_read=184837 bytes_retransmit=9 bytes_invalid=0 send_seq=5790 receive_seq=5789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996818 heater_bed: target=0 temp=30.4 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.8  sysload=0.16 cputime=120.861 memavail=716236 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.8 pwm=0.000
Stats 2413.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=82553 bytes_read=185189 bytes_retransmit=9 bytes_invalid=0 send_seq=5799 receive_seq=5799 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=0 temp=30.4 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.8  sysload=0.16 cputime=120.922 memavail=716408 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.2 pwm=0.000
Stats 2414.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=82685 bytes_read=185555 bytes_retransmit=9 bytes_invalid=0 send_seq=5809 receive_seq=5809 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996833 heater_bed: target=0 temp=30.4 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.8  sysload=0.16 cputime=120.984 memavail=716160 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.5 pwm=0.000
Stats 2415.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=82812 bytes_read=185892 bytes_retransmit=9 bytes_invalid=0 send_seq=5819 receive_seq=5819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996831 heater_bed: target=0 temp=30.4 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=32.7  sysload=0.16 cputime=121.046 memavail=716160 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.0 pwm=0.000
Stats 2416.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=82935 bytes_read=186249 bytes_retransmit=9 bytes_invalid=0 send_seq=5828 receive_seq=5828 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=0 temp=30.4 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.16 cputime=121.108 memavail=716928 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.5 pwm=0.000
Stats 2417.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=83062 bytes_read=186599 bytes_retransmit=9 bytes_invalid=0 send_seq=5838 receive_seq=5837 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=30.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.5  sysload=0.15 cputime=121.169 memavail=717004 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.8 pwm=0.000
Stats 2418.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=83185 bytes_read=186932 bytes_retransmit=9 bytes_invalid=0 send_seq=5847 receive_seq=5847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=30.4 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.6  sysload=0.15 cputime=121.229 memavail=717028 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.2 pwm=0.000
Stats 2419.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=83317 bytes_read=187298 bytes_retransmit=9 bytes_invalid=0 send_seq=5857 receive_seq=5857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=30.4 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.8  sysload=0.15 cputime=121.292 memavail=717280 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.7 pwm=0.000
Stats 2420.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=83444 bytes_read=187650 bytes_retransmit=9 bytes_invalid=0 send_seq=5867 receive_seq=5867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=30.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.8  sysload=0.15 cputime=121.354 memavail=716816 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.1 pwm=0.000
Stats 2421.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=83567 bytes_read=187982 bytes_retransmit=9 bytes_invalid=0 send_seq=5876 receive_seq=5876 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=30.3 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.7  sysload=0.15 cputime=121.414 memavail=716572 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.5 pwm=0.000
Stats 2422.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=83694 bytes_read=188363 bytes_retransmit=9 bytes_invalid=0 send_seq=5886 receive_seq=5886 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=30.3 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.6  sysload=0.14 cputime=121.475 memavail=716580 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.0 pwm=0.000
Stats 2423.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=83817 bytes_read=188710 bytes_retransmit=9 bytes_invalid=0 send_seq=5895 receive_seq=5895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=30.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.6  sysload=0.14 cputime=121.536 memavail=716580 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.4 pwm=0.000
Stats 2424.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=83944 bytes_read=189042 bytes_retransmit=9 bytes_invalid=0 send_seq=5905 receive_seq=5904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=30.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=32.7  sysload=0.14 cputime=121.597 memavail=717092 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.9 pwm=0.000
Stats 2425.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=84069 bytes_read=189408 bytes_retransmit=9 bytes_invalid=0 send_seq=5914 receive_seq=5914 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=30.3 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=32.9  sysload=0.14 cputime=121.658 memavail=715972 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.4 pwm=0.000
Stats 2426.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=84201 bytes_read=189760 bytes_retransmit=9 bytes_invalid=0 send_seq=5924 receive_seq=5924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=32.6  sysload=0.14 cputime=121.720 memavail=716228 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.7 pwm=0.000
Stats 2427.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=84319 bytes_read=190107 bytes_retransmit=9 bytes_invalid=0 send_seq=5933 receive_seq=5933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=30.3 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=32.7  sysload=0.13 cputime=121.781 memavail=716232 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.2 pwm=0.000
Stats 2428.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=84451 bytes_read=190488 bytes_retransmit=9 bytes_invalid=0 send_seq=5943 receive_seq=5943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.9  sysload=0.13 cputime=121.846 memavail=716736 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.6 pwm=0.000
Stats 2429.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=84578 bytes_read=190825 bytes_retransmit=9 bytes_invalid=0 send_seq=5953 receive_seq=5953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=32.7  sysload=0.13 cputime=121.907 memavail=716688 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.1 pwm=0.000
Stats 2430.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=84701 bytes_read=191172 bytes_retransmit=9 bytes_invalid=0 send_seq=5962 receive_seq=5962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.13 cputime=121.968 memavail=716140 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.7 pwm=0.000
Stats 2431.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=84828 bytes_read=191538 bytes_retransmit=9 bytes_invalid=0 send_seq=5972 receive_seq=5972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.13 cputime=122.030 memavail=715888 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.0 pwm=0.000
Stats 2432.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=84951 bytes_read=191885 bytes_retransmit=9 bytes_invalid=0 send_seq=5981 receive_seq=5981 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.6  sysload=0.12 cputime=122.100 memavail=715892 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.6 pwm=0.000
Stats 2433.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=85078 bytes_read=192237 bytes_retransmit=9 bytes_invalid=0 send_seq=5991 receive_seq=5991 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996836 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.12 cputime=122.162 memavail=715848 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.1 pwm=0.000
Stats 2434.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=85201 bytes_read=192598 bytes_retransmit=9 bytes_invalid=0 send_seq=6000 receive_seq=6000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996836 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.8  sysload=0.12 cputime=122.223 memavail=715652 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.5 pwm=0.000
Stats 2435.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=85339 bytes_read=192935 bytes_retransmit=9 bytes_invalid=0 send_seq=6011 receive_seq=6010 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.12 cputime=122.285 memavail=716704 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.0 pwm=0.000
Stats 2436.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=85457 bytes_read=193298 bytes_retransmit=9 bytes_invalid=0 send_seq=6020 receive_seq=6020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=32.8  sysload=0.12 cputime=122.346 memavail=715728 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.6 pwm=0.000
Stats 2437.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=85584 bytes_read=193674 bytes_retransmit=9 bytes_invalid=0 send_seq=6030 receive_seq=6029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996852 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.11 cputime=122.409 memavail=715736 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.9 pwm=0.000
Stats 2438.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=85707 bytes_read=194011 bytes_retransmit=9 bytes_invalid=0 send_seq=6039 receive_seq=6039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.9  sysload=0.11 cputime=122.469 memavail=715484 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.5 pwm=0.000
Stats 2439.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=85834 bytes_read=194358 bytes_retransmit=9 bytes_invalid=0 send_seq=6049 receive_seq=6048 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=30.1 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=32.8  sysload=0.11 cputime=122.530 memavail=715484 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.0 pwm=0.000
Stats 2440.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=85957 bytes_read=194724 bytes_retransmit=9 bytes_invalid=0 send_seq=6058 receive_seq=6058 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=30.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.5  sysload=0.11 cputime=122.591 memavail=714844 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.5 pwm=0.000
Stats 2441.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=86084 bytes_read=195056 bytes_retransmit=9 bytes_invalid=0 send_seq=6068 receive_seq=6067 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=30.1 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.8  sysload=0.11 cputime=122.652 memavail=714592 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.0 pwm=0.000
Stats 2442.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=86207 bytes_read=195414 bytes_retransmit=9 bytes_invalid=0 send_seq=6077 receive_seq=6077 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=30.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.7  sysload=0.10 cputime=122.714 memavail=714900 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.6 pwm=0.000
Stats 2443.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=86334 bytes_read=195766 bytes_retransmit=9 bytes_invalid=0 send_seq=6087 receive_seq=6086 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=30.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.10 cputime=122.776 memavail=714648 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.0 pwm=0.000
Stats 2444.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=86459 bytes_read=196103 bytes_retransmit=9 bytes_invalid=0 send_seq=6096 receive_seq=6096 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=30.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.10 cputime=122.837 memavail=714396 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.6 pwm=0.000
Stats 2445.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=86586 bytes_read=196469 bytes_retransmit=9 bytes_invalid=0 send_seq=6106 receive_seq=6106 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=30.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.8  sysload=0.10 cputime=122.901 memavail=714404 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.1 pwm=0.000
Stats 2446.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=86709 bytes_read=196816 bytes_retransmit=9 bytes_invalid=0 send_seq=6115 receive_seq=6115 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.10 cputime=122.961 memavail=714504 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.6 pwm=0.000
Stats 2447.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=86836 bytes_read=197168 bytes_retransmit=9 bytes_invalid=0 send_seq=6125 receive_seq=6125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.09 cputime=123.022 memavail=714792 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.1 pwm=0.000
Stats 2448.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=86959 bytes_read=197529 bytes_retransmit=9 bytes_invalid=0 send_seq=6134 receive_seq=6134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=30.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.09 cputime=123.083 memavail=714796 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.7 pwm=0.000
Stats 2449.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=87086 bytes_read=197876 bytes_retransmit=9 bytes_invalid=0 send_seq=6144 receive_seq=6143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.09 cputime=123.143 memavail=714544 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.2 pwm=0.000
Stats 2450.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=87209 bytes_read=198213 bytes_retransmit=9 bytes_invalid=0 send_seq=6153 receive_seq=6153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.7  sysload=0.09 cputime=123.203 memavail=713664 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.8 pwm=0.000
Stats 2451.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=87327 bytes_read=198574 bytes_retransmit=9 bytes_invalid=0 send_seq=6162 receive_seq=6162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.9  sysload=0.09 cputime=123.264 memavail=713412 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.4 pwm=0.000
Stats 2452.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=87459 bytes_read=198941 bytes_retransmit=9 bytes_invalid=0 send_seq=6172 receive_seq=6172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.6  sysload=0.08 cputime=123.327 memavail=713420 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.8 pwm=0.000
Stats 2453.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=87577 bytes_read=199273 bytes_retransmit=9 bytes_invalid=0 send_seq=6181 receive_seq=6181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.8  sysload=0.08 cputime=123.386 memavail=713680 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.4 pwm=0.000
Stats 2454.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=87709 bytes_read=199639 bytes_retransmit=9 bytes_invalid=0 send_seq=6191 receive_seq=6191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.8  sysload=0.08 cputime=123.448 memavail=713684 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.0 pwm=0.000
Stats 2455.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=87827 bytes_read=199986 bytes_retransmit=9 bytes_invalid=0 send_seq=6200 receive_seq=6200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=29.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.08 cputime=123.509 memavail=715384 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.4 pwm=0.000
Stats 2456.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=87954 bytes_read=200323 bytes_retransmit=9 bytes_invalid=0 send_seq=6210 receive_seq=6210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.8  sysload=0.08 cputime=123.571 memavail=715456 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.0 pwm=0.000
Stats 2457.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=88077 bytes_read=200699 bytes_retransmit=9 bytes_invalid=0 send_seq=6219 receive_seq=6219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=29.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.5  sysload=0.08 cputime=123.628 memavail=715968 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.7 pwm=0.000
Stats 2458.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=88204 bytes_read=201051 bytes_retransmit=9 bytes_invalid=0 send_seq=6229 receive_seq=6229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=30.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.7  sysload=0.08 cputime=123.687 memavail=716220 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.1 pwm=0.000
Stats 2459.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=88332 bytes_read=201388 bytes_retransmit=9 bytes_invalid=0 send_seq=6239 receive_seq=6239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=29.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.08 cputime=123.744 memavail=715720 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.7 pwm=0.000
Stats 2460.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=88450 bytes_read=201764 bytes_retransmit=9 bytes_invalid=0 send_seq=6248 receive_seq=6248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=29.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.08 cputime=123.801 memavail=715100 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.2 pwm=0.000
Stats 2461.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=88587 bytes_read=202106 bytes_retransmit=9 bytes_invalid=0 send_seq=6259 receive_seq=6259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=29.9 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.7  sysload=0.08 cputime=123.858 memavail=714848 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.8 pwm=0.000
Stats 2462.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=88705 bytes_read=202453 bytes_retransmit=9 bytes_invalid=0 send_seq=6268 receive_seq=6268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=29.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.39 cputime=123.916 memavail=714604 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.4 pwm=0.000
Stats 2463.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=88837 bytes_read=202834 bytes_retransmit=9 bytes_invalid=0 send_seq=6278 receive_seq=6278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.39 cputime=123.975 memavail=714856 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.0 pwm=0.000
Stats 2464.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=88955 bytes_read=203166 bytes_retransmit=9 bytes_invalid=0 send_seq=6287 receive_seq=6287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.8  sysload=0.39 cputime=124.032 memavail=714628 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.6 pwm=0.000
Stats 2465.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=89082 bytes_read=203518 bytes_retransmit=9 bytes_invalid=0 send_seq=6297 receive_seq=6297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.7  sysload=0.39 cputime=124.089 memavail=714844 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.2 pwm=0.000
Stats 2466.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=89207 bytes_read=203879 bytes_retransmit=9 bytes_invalid=0 send_seq=6306 receive_seq=6306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.39 cputime=124.147 memavail=714380 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.7 pwm=0.000
Stats 2467.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=89325 bytes_read=204223 bytes_retransmit=9 bytes_invalid=0 send_seq=6315 receive_seq=6315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.6  sysload=0.52 cputime=124.210 memavail=714260 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.3 pwm=0.000
Stats 2468.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=89457 bytes_read=204564 bytes_retransmit=9 bytes_invalid=0 send_seq=6325 receive_seq=6325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.52 cputime=124.268 memavail=714264 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.0 pwm=0.000
Stats 2469.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=89575 bytes_read=204922 bytes_retransmit=9 bytes_invalid=0 send_seq=6334 receive_seq=6334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.52 cputime=124.326 memavail=714264 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.5 pwm=0.000
Stats 2470.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=89702 bytes_read=205254 bytes_retransmit=9 bytes_invalid=0 send_seq=6344 receive_seq=6343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.8  sysload=0.52 cputime=124.383 memavail=714728 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.1 pwm=0.000
Stats 2471.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=89825 bytes_read=205606 bytes_retransmit=9 bytes_invalid=0 send_seq=6353 receive_seq=6353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=32.7  sysload=0.52 cputime=124.438 memavail=714824 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.8 pwm=0.000
Stats 2472.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=89943 bytes_read=205982 bytes_retransmit=9 bytes_invalid=0 send_seq=6362 receive_seq=6362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.8  sysload=0.48 cputime=124.495 memavail=715140 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.3 pwm=0.000
Stats 2473.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=90075 bytes_read=206319 bytes_retransmit=9 bytes_invalid=0 send_seq=6372 receive_seq=6372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.5  sysload=0.48 cputime=124.550 memavail=715988 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.9 pwm=0.000
Stats 2474.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=90193 bytes_read=206666 bytes_retransmit=9 bytes_invalid=0 send_seq=6381 receive_seq=6381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.6  sysload=0.48 cputime=124.606 memavail=715988 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.6 pwm=0.000
Stats 2475.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=90320 bytes_read=207027 bytes_retransmit=9 bytes_invalid=0 send_seq=6391 receive_seq=6390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.6  sysload=0.48 cputime=124.663 memavail=715332 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.1 pwm=0.000
Stats 2476.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=90443 bytes_read=207364 bytes_retransmit=9 bytes_invalid=0 send_seq=6400 receive_seq=6400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=29.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.48 cputime=124.722 memavail=715332 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.7 pwm=0.000
Stats 2477.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=90561 bytes_read=207726 bytes_retransmit=9 bytes_invalid=0 send_seq=6409 receive_seq=6409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=32.8  sysload=0.44 cputime=124.779 memavail=715352 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.4 pwm=0.000
Stats 2478.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=90693 bytes_read=208092 bytes_retransmit=9 bytes_invalid=0 send_seq=6419 receive_seq=6419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.44 cputime=124.836 memavail=715360 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.9 pwm=0.000
Stats 2479.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=90811 bytes_read=208424 bytes_retransmit=9 bytes_invalid=0 send_seq=6428 receive_seq=6428 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.7  sysload=0.44 cputime=124.892 memavail=715616 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.6 pwm=0.000
Stats 2480.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=90929 bytes_read=208771 bytes_retransmit=9 bytes_invalid=0 send_seq=6437 receive_seq=6437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.44 cputime=124.947 memavail=715852 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.3 pwm=0.000
Stats 2481.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=91061 bytes_read=209137 bytes_retransmit=9 bytes_invalid=0 send_seq=6447 receive_seq=6447 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.44 cputime=125.004 memavail=715900 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.8 pwm=0.000
Stats 2482.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=91179 bytes_read=209484 bytes_retransmit=9 bytes_invalid=0 send_seq=6456 receive_seq=6456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996855 heater_bed: target=0 temp=29.7 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.6  sysload=0.48 cputime=125.060 memavail=716416 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.5 pwm=0.000
Stats 2483.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=91306 bytes_read=209831 bytes_retransmit=9 bytes_invalid=0 send_seq=6466 receive_seq=6465 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996857 heater_bed: target=0 temp=29.6 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.6  sysload=0.48 cputime=125.115 memavail=716668 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.2 pwm=0.000
Stats 2484.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=91429 bytes_read=210197 bytes_retransmit=9 bytes_invalid=0 send_seq=6475 receive_seq=6475 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=29.6 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.5  sysload=0.48 cputime=125.170 memavail=716444 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.8 pwm=0.000
Stats 2485.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=91547 bytes_read=210529 bytes_retransmit=9 bytes_invalid=0 send_seq=6484 receive_seq=6484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=29.6 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.48 cputime=125.230 memavail=715548 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.4 pwm=0.000
Stats 2486.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=91679 bytes_read=210881 bytes_retransmit=9 bytes_invalid=0 send_seq=6494 receive_seq=6494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=29.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=32.4  sysload=0.48 cputime=125.285 memavail=715808 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.1 pwm=0.000
Stats 2487.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=91797 bytes_read=211257 bytes_retransmit=9 bytes_invalid=0 send_seq=6503 receive_seq=6503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996863 heater_bed: target=0 temp=29.6 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.6  sysload=0.45 cputime=125.341 memavail=715844 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.7 pwm=0.000
Stats 2488.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=91915 bytes_read=211589 bytes_retransmit=9 bytes_invalid=0 send_seq=6512 receive_seq=6512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996865 heater_bed: target=0 temp=29.6 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.6  sysload=0.45 cputime=125.395 memavail=716068 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.4 pwm=0.000
Stats 2489.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=92047 bytes_read=211941 bytes_retransmit=9 bytes_invalid=0 send_seq=6522 receive_seq=6522 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=29.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.6  sysload=0.45 cputime=125.453 memavail=715856 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.0 pwm=0.000
Stats 2490.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=92165 bytes_read=212302 bytes_retransmit=9 bytes_invalid=0 send_seq=6531 receive_seq=6531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.6  sysload=0.45 cputime=125.507 memavail=714720 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.6 pwm=0.000
Stats 2491.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=92283 bytes_read=212634 bytes_retransmit=9 bytes_invalid=0 send_seq=6540 receive_seq=6540 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996866 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.8  sysload=0.45 cputime=125.560 memavail=714748 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.3 pwm=0.000
Stats 2492.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=92423 bytes_read=213017 bytes_retransmit=9 bytes_invalid=0 send_seq=6551 receive_seq=6551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996863 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.7  sysload=0.41 cputime=125.616 memavail=714752 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.0 pwm=0.000
Stats 2493.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=92541 bytes_read=213368 bytes_retransmit=9 bytes_invalid=0 send_seq=6560 receive_seq=6560 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.41 cputime=125.673 memavail=714764 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.6 pwm=0.000
Stats 2494.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=92659 bytes_read=213692 bytes_retransmit=9 bytes_invalid=0 send_seq=6569 receive_seq=6569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=32.8  sysload=0.41 cputime=125.733 memavail=714984 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.3 pwm=0.000
Stats 2495.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=92802 bytes_read=214058 bytes_retransmit=9 bytes_invalid=0 send_seq=6579 receive_seq=6579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.8  sysload=0.41 cputime=125.788 memavail=714124 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.0 pwm=0.000
Stats 2496.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=92936 bytes_read=214410 bytes_retransmit=9 bytes_invalid=0 send_seq=6589 receive_seq=6589 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=32.9  sysload=0.41 cputime=125.842 memavail=713648 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.6 pwm=0.000
Stats 2497.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=93070 bytes_read=214762 bytes_retransmit=9 bytes_invalid=0 send_seq=6599 receive_seq=6599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.38 cputime=125.896 memavail=713364 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.3 pwm=0.000
Stats 2498.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=93202 bytes_read=215128 bytes_retransmit=9 bytes_invalid=0 send_seq=6609 receive_seq=6609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996859 heater_bed: target=0 temp=29.5 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.38 cputime=125.957 memavail=713648 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.0 pwm=0.000
Stats 2499.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=93320 bytes_read=215475 bytes_retransmit=9 bytes_invalid=0 send_seq=6618 receive_seq=6618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.38 cputime=126.010 memavail=713432 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000
Stats 2500.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=93438 bytes_read=215807 bytes_retransmit=9 bytes_invalid=0 send_seq=6627 receive_seq=6627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996859 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.38 cputime=126.063 memavail=715188 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.3 pwm=0.000
Stats 2501.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=93575 bytes_read=216178 bytes_retransmit=9 bytes_invalid=0 send_seq=6638 receive_seq=6638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.38 cputime=126.117 memavail=715256 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.1 pwm=0.000
Stats 2502.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=93693 bytes_read=216540 bytes_retransmit=9 bytes_invalid=0 send_seq=6647 receive_seq=6647 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996866 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.35 cputime=126.173 memavail=714968 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.7 pwm=0.000
Stats 2503.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=93811 bytes_read=216872 bytes_retransmit=9 bytes_invalid=0 send_seq=6656 receive_seq=6656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=33.1  sysload=0.35 cputime=126.237 memavail=715628 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.4 pwm=0.000
Stats 2504.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=93943 bytes_read=217238 bytes_retransmit=9 bytes_invalid=0 send_seq=6666 receive_seq=6666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996863 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=33.0  sysload=0.35 cputime=126.291 memavail=715632 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.1 pwm=0.000
Stats 2505.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=94061 bytes_read=217585 bytes_retransmit=9 bytes_invalid=0 send_seq=6675 receive_seq=6675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996864 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=32.9  sysload=0.35 cputime=126.346 memavail=714372 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.7 pwm=0.000
Stats 2506.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=94179 bytes_read=217917 bytes_retransmit=9 bytes_invalid=0 send_seq=6684 receive_seq=6684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996863 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=33.1  sysload=0.35 cputime=126.398 memavail=714372 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000
Stats 2507.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=94311 bytes_read=218298 bytes_retransmit=9 bytes_invalid=0 send_seq=6694 receive_seq=6694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.56 cputime=126.457 memavail=714796 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.1 pwm=0.000
Stats 2508.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=94429 bytes_read=218645 bytes_retransmit=9 bytes_invalid=0 send_seq=6703 receive_seq=6703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=29.3 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=33.1  sysload=0.56 cputime=126.511 memavail=714664 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000
Stats 2509.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=94547 bytes_read=218977 bytes_retransmit=9 bytes_invalid=0 send_seq=6712 receive_seq=6712 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=29.4 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=33.1  sysload=0.56 cputime=126.564 memavail=714412 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.5 pwm=0.000
Stats 2510.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=94674 bytes_read=219338 bytes_retransmit=9 bytes_invalid=0 send_seq=6722 receive_seq=6721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996859 heater_bed: target=0 temp=29.3 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=33.1  sysload=0.56 cputime=126.619 memavail=716176 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.2 pwm=0.000
Stats 2511.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=94797 bytes_read=219690 bytes_retransmit=9 bytes_invalid=0 send_seq=6731 receive_seq=6731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=29.3 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=33.0  sysload=0.56 cputime=126.676 memavail=715924 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.9 pwm=0.000
Stats 2512.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=94915 bytes_read=220037 bytes_retransmit=9 bytes_invalid=0 send_seq=6740 receive_seq=6740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996859 heater_bed: target=0 temp=29.3 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.51 cputime=126.730 memavail=715924 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.6 pwm=0.000
Stats 2513.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=95033 bytes_read=220398 bytes_retransmit=9 bytes_invalid=0 send_seq=6749 receive_seq=6749 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=29.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=33.0  sysload=0.51 cputime=126.785 memavail=715684 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.3 pwm=0.000
Stats 2514.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=95165 bytes_read=220750 bytes_retransmit=9 bytes_invalid=0 send_seq=6759 receive_seq=6759 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=29.3 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.51 cputime=126.839 memavail=715684 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.0 pwm=0.000
Stats 2515.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=95283 bytes_read=221082 bytes_retransmit=9 bytes_invalid=0 send_seq=6768 receive_seq=6768 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=29.2 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=33.1  sysload=0.51 cputime=126.893 memavail=714548 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.7 pwm=0.000
Stats 2516.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=95401 bytes_read=221443 bytes_retransmit=9 bytes_invalid=0 send_seq=6777 receive_seq=6777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996861 heater_bed: target=0 temp=29.2 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.51 cputime=126.949 memavail=714548 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.4 pwm=0.000
Stats 2517.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=95533 bytes_read=221810 bytes_retransmit=9 bytes_invalid=0 send_seq=6787 receive_seq=6787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=29.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.0  sysload=0.55 cputime=127.004 memavail=714548 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000
Stats 2518.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=95651 bytes_read=222139 bytes_retransmit=9 bytes_invalid=0 send_seq=6796 receive_seq=6796 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=29.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.9  sysload=0.55 cputime=127.058 memavail=714556 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000
Stats 2519.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=95769 bytes_read=222487 bytes_retransmit=9 bytes_invalid=0 send_seq=6805 receive_seq=6805 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996857 heater_bed: target=0 temp=29.2 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.9  sysload=0.55 cputime=127.112 memavail=714556 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000
Stats 2520.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=95896 bytes_read=222830 bytes_retransmit=9 bytes_invalid=0 send_seq=6815 receive_seq=6814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=29.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.2  sysload=0.55 cputime=127.167 memavail=714680 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000
Stats 2521.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=96019 bytes_read=223167 bytes_retransmit=9 bytes_invalid=0 send_seq=6824 receive_seq=6824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996857 heater_bed: target=0 temp=29.2 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=33.1  sysload=0.55 cputime=127.220 memavail=714752 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000
Stats 2522.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=96137 bytes_read=223558 bytes_retransmit=9 bytes_invalid=0 send_seq=6833 receive_seq=6833 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.9  sysload=0.51 cputime=127.275 memavail=714752 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000
Stats 2523.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=96255 bytes_read=223890 bytes_retransmit=9 bytes_invalid=0 send_seq=6842 receive_seq=6842 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=33.0  sysload=0.51 cputime=127.327 memavail=714760 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000
Stats 2524.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=96382 bytes_read=224227 bytes_retransmit=9 bytes_invalid=0 send_seq=6852 receive_seq=6852 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996882 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.51 cputime=127.380 memavail=714760 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000
Stats 2525.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=96507 bytes_read=224603 bytes_retransmit=9 bytes_invalid=0 send_seq=6861 receive_seq=6861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.2  sysload=0.51 cputime=127.436 memavail=713864 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000
Stats 2526.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=96625 bytes_read=224935 bytes_retransmit=9 bytes_invalid=0 send_seq=6870 receive_seq=6870 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.51 cputime=127.489 memavail=714408 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000
Stats 2527.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=96743 bytes_read=225297 bytes_retransmit=9 bytes_invalid=0 send_seq=6879 receive_seq=6879 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.0  sysload=0.55 cputime=127.544 memavail=714408 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000
Stats 2528.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=96875 bytes_read=225663 bytes_retransmit=9 bytes_invalid=0 send_seq=6889 receive_seq=6889 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=33.0  sysload=0.55 cputime=127.599 memavail=714420 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000
Stats 2529.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=96993 bytes_read=225995 bytes_retransmit=9 bytes_invalid=0 send_seq=6898 receive_seq=6898 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.55 cputime=127.651 memavail=714420 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000
Stats 2530.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=97111 bytes_read=226342 bytes_retransmit=9 bytes_invalid=0 send_seq=6907 receive_seq=6907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=33.0  sysload=0.55 cputime=127.707 memavail=713788 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000
Stats 2531.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=97238 bytes_read=226708 bytes_retransmit=9 bytes_invalid=0 send_seq=6917 receive_seq=6917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996873 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=33.0  sysload=0.55 cputime=127.760 memavail=713788 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
Stats 2532.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=97361 bytes_read=227055 bytes_retransmit=9 bytes_invalid=0 send_seq=6926 receive_seq=6926 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=0 temp=29.1 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.1  sysload=0.58 cputime=127.813 memavail=714632 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000
Stats 2533.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=97479 bytes_read=227402 bytes_retransmit=9 bytes_invalid=0 send_seq=6935 receive_seq=6935 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.58 cputime=127.866 memavail=714176 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000
Stats 2534.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=97597 bytes_read=227763 bytes_retransmit=9 bytes_invalid=0 send_seq=6944 receive_seq=6944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996869 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.9  sysload=0.58 cputime=127.919 memavail=714636 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000
Stats 2535.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=97724 bytes_read=228095 bytes_retransmit=9 bytes_invalid=0 send_seq=6954 receive_seq=6953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996881 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.2  sysload=0.58 cputime=127.975 memavail=714516 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000
Stats 2536.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=97847 bytes_read=228447 bytes_retransmit=9 bytes_invalid=0 send_seq=6963 receive_seq=6963 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.58 cputime=128.028 memavail=715324 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000
Stats 2537.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=97965 bytes_read=228823 bytes_retransmit=9 bytes_invalid=0 send_seq=6972 receive_seq=6972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=32.9  sysload=0.62 cputime=128.081 memavail=715376 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000
Stats 2538.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=98083 bytes_read=229155 bytes_retransmit=9 bytes_invalid=0 send_seq=6981 receive_seq=6981 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.1  sysload=0.62 cputime=128.133 memavail=715880 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000
Stats 2539.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=98210 bytes_read=229502 bytes_retransmit=9 bytes_invalid=0 send_seq=6991 receive_seq=6990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996875 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.62 cputime=128.188 memavail=715840 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000
Stats 2540.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=98333 bytes_read=229868 bytes_retransmit=9 bytes_invalid=0 send_seq=7000 receive_seq=7000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.62 cputime=128.245 memavail=714280 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.0 pwm=0.000
Stats 2541.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=98451 bytes_read=230200 bytes_retransmit=9 bytes_invalid=0 send_seq=7009 receive_seq=7009 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=32.9  sysload=0.62 cputime=128.299 memavail=714536 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000
Stats 2542.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=98569 bytes_read=230562 bytes_retransmit=9 bytes_invalid=0 send_seq=7018 receive_seq=7018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=32.8  sysload=0.57 cputime=128.355 memavail=714536 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000
Stats 2543.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=98696 bytes_read=230928 bytes_retransmit=9 bytes_invalid=0 send_seq=7028 receive_seq=7028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996869 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.9  sysload=0.57 cputime=128.410 memavail=714292 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 2544.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=98819 bytes_read=231252 bytes_retransmit=9 bytes_invalid=0 send_seq=7037 receive_seq=7037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996869 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.9  sysload=0.57 cputime=128.463 memavail=714296 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 2545.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=98937 bytes_read=231589 bytes_retransmit=9 bytes_invalid=0 send_seq=7046 receive_seq=7046 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996869 heater_bed: target=0 temp=29.0 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=33.0  sysload=0.57 cputime=128.518 memavail=713400 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000
Stats 2546.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=99055 bytes_read=231949 bytes_retransmit=9 bytes_invalid=0 send_seq=7055 receive_seq=7055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=33.0  sysload=0.57 cputime=128.571 memavail=713148 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 2547.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=99173 bytes_read=232296 bytes_retransmit=9 bytes_invalid=0 send_seq=7064 receive_seq=7064 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996868 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.8  sysload=0.52 cputime=128.624 memavail=713148 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 2548.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=99305 bytes_read=232648 bytes_retransmit=9 bytes_invalid=0 send_seq=7074 receive_seq=7074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996866 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=33.3  sysload=0.52 cputime=128.678 memavail=712652 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 2549.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=99423 bytes_read=233009 bytes_retransmit=9 bytes_invalid=0 send_seq=7083 receive_seq=7083 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=33.2  sysload=0.52 cputime=128.731 memavail=712652 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 2550.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=99547 bytes_read=233341 bytes_retransmit=9 bytes_invalid=0 send_seq=7093 receive_seq=7092 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=32.9  sysload=0.52 cputime=128.785 memavail=711292 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000
Stats 2551.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=99665 bytes_read=233704 bytes_retransmit=9 bytes_invalid=0 send_seq=7102 receive_seq=7102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=33.0  sysload=0.52 cputime=128.838 memavail=711292 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.5 pwm=0.000
Stats 2552.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=99792 bytes_read=234080 bytes_retransmit=9 bytes_invalid=0 send_seq=7112 receive_seq=7111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996914 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.56 cputime=128.891 memavail=711296 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 2553.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=99915 bytes_read=234417 bytes_retransmit=9 bytes_invalid=0 send_seq=7121 receive_seq=7121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=0 temp=28.8 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.9  sysload=0.56 cputime=128.945 memavail=710992 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 2554.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=100033 bytes_read=234764 bytes_retransmit=9 bytes_invalid=0 send_seq=7130 receive_seq=7130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=32.9  sysload=0.56 cputime=128.998 memavail=711304 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 2555.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=100151 bytes_read=235125 bytes_retransmit=9 bytes_invalid=0 send_seq=7139 receive_seq=7139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=0 temp=28.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=33.1  sysload=0.56 cputime=129.052 memavail=710436 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000
Stats 2556.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=100269 bytes_read=235457 bytes_retransmit=9 bytes_invalid=0 send_seq=7148 receive_seq=7148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=0 temp=28.8 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=33.1  sysload=0.56 cputime=129.105 memavail=710516 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
Stats 2557.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=100401 bytes_read=235824 bytes_retransmit=9 bytes_invalid=0 send_seq=7158 receive_seq=7158 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=0 temp=28.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=32.9  sysload=0.52 cputime=129.160 memavail=710268 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000
Stats 2558.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=100519 bytes_read=236185 bytes_retransmit=9 bytes_invalid=0 send_seq=7167 receive_seq=7167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=0 temp=28.8 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=33.2  sysload=0.52 cputime=129.216 memavail=710480 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000
Stats 2559.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=100637 bytes_read=236517 bytes_retransmit=9 bytes_invalid=0 send_seq=7176 receive_seq=7176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996886 heater_bed: target=0 temp=28.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=33.0  sysload=0.52 cputime=129.274 memavail=710276 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
Stats 2560.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=100755 bytes_read=236864 bytes_retransmit=9 bytes_invalid=0 send_seq=7185 receive_seq=7185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=0 temp=28.8 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=33.0  sysload=0.52 cputime=129.329 memavail=710812 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
Stats 2561.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=100882 bytes_read=237225 bytes_retransmit=9 bytes_invalid=0 send_seq=7195 receive_seq=7194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996880 heater_bed: target=0 temp=28.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=32.9  sysload=0.52 cputime=129.383 memavail=710564 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 2562.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=101005 bytes_read=237577 bytes_retransmit=9 bytes_invalid=0 send_seq=7204 receive_seq=7204 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=28.8 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.1  sysload=0.47 cputime=129.436 memavail=710340 print_time=419.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.1 pwm=0.000
Stats 2900.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=141348 bytes_read=355577 bytes_retransmit=9 bytes_invalid=0 send_seq=10279 receive_seq=10279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.2  sysload=0.45 cputime=148.631 memavail=716628 print_time=1020.606 buffer_time=0.022 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 2901.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=141354 bytes_read=355740 bytes_retransmit=9 bytes_invalid=0 send_seq=10280 receive_seq=10280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.3  sysload=0.45 cputime=148.666 memavail=716684 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2902.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000005 bytes_write=141360 bytes_read=355909 bytes_retransmit=9 bytes_invalid=0 send_seq=10281 receive_seq=10281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=33.1  sysload=0.45 cputime=148.697 memavail=715936 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2903.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=141366 bytes_read=356061 bytes_retransmit=9 bytes_invalid=0 send_seq=10282 receive_seq=10282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996849 heater_bed: target=0 temp=26.3 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=33.2  sysload=0.41 cputime=148.728 memavail=715936 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2904.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=141372 bytes_read=356224 bytes_retransmit=9 bytes_invalid=0 send_seq=10283 receive_seq=10283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.3 mcu_temp: temp=33.4  sysload=0.41 cputime=148.759 memavail=715712 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2905.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=141378 bytes_read=356401 bytes_retransmit=9 bytes_invalid=0 send_seq=10284 receive_seq=10284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.1 mcu_temp: temp=33.2  sysload=0.41 cputime=148.790 memavail=715312 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2906.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=141384 bytes_read=356549 bytes_retransmit=9 bytes_invalid=0 send_seq=10285 receive_seq=10285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=33.3  sysload=0.41 cputime=148.821 memavail=715380 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 2907.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=141390 bytes_read=356712 bytes_retransmit=9 bytes_invalid=0 send_seq=10286 receive_seq=10286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=33.2  sysload=0.38 cputime=148.851 memavail=715640 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 2908.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141396 bytes_read=356903 bytes_retransmit=9 bytes_invalid=0 send_seq=10287 receive_seq=10287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.2  sysload=0.38 cputime=148.883 memavail=715640 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 2909.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141402 bytes_read=357051 bytes_retransmit=9 bytes_invalid=0 send_seq=10288 receive_seq=10288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.2  sysload=0.38 cputime=148.913 memavail=715640 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 2910.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141408 bytes_read=357214 bytes_retransmit=9 bytes_invalid=0 send_seq=10289 receive_seq=10289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.4  sysload=0.38 cputime=148.945 memavail=714744 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 2911.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141414 bytes_read=357391 bytes_retransmit=9 bytes_invalid=0 send_seq=10290 receive_seq=10290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.3  sysload=0.38 cputime=148.976 memavail=714944 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 2912.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141420 bytes_read=357539 bytes_retransmit=9 bytes_invalid=0 send_seq=10291 receive_seq=10291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=33.3  sysload=0.35 cputime=149.007 memavail=715764 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 2913.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141426 bytes_read=357730 bytes_retransmit=9 bytes_invalid=0 send_seq=10292 receive_seq=10292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.3  sysload=0.35 cputime=149.038 memavail=715264 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 2914.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141432 bytes_read=357893 bytes_retransmit=9 bytes_invalid=0 send_seq=10293 receive_seq=10293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=33.3  sysload=0.35 cputime=149.067 memavail=715112 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 2915.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141438 bytes_read=358041 bytes_retransmit=9 bytes_invalid=0 send_seq=10294 receive_seq=10294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=33.1  sysload=0.35 cputime=149.098 memavail=715020 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 2916.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141444 bytes_read=358218 bytes_retransmit=9 bytes_invalid=0 send_seq=10295 receive_seq=10295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=26.2 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=33.3  sysload=0.35 cputime=149.129 memavail=714732 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 2917.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141450 bytes_read=358381 bytes_retransmit=9 bytes_invalid=0 send_seq=10296 receive_seq=10296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.3 mcu_temp: temp=33.3  sysload=0.32 cputime=149.161 memavail=714792 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 2918.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141456 bytes_read=358543 bytes_retransmit=9 bytes_invalid=0 send_seq=10297 receive_seq=10297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=33.2  sysload=0.32 cputime=149.191 memavail=715012 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 2919.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141462 bytes_read=358720 bytes_retransmit=9 bytes_invalid=0 send_seq=10298 receive_seq=10298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.3 mcu_temp: temp=33.3  sysload=0.32 cputime=149.222 memavail=715044 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 2920.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141468 bytes_read=358883 bytes_retransmit=9 bytes_invalid=0 send_seq=10299 receive_seq=10299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.2  sysload=0.32 cputime=149.252 memavail=713924 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 2921.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141474 bytes_read=359031 bytes_retransmit=9 bytes_invalid=0 send_seq=10300 receive_seq=10300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996837 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.1  sysload=0.32 cputime=149.281 memavail=713888 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 2922.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141480 bytes_read=359208 bytes_retransmit=9 bytes_invalid=0 send_seq=10301 receive_seq=10301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996836 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=33.2  sysload=0.29 cputime=149.312 memavail=713208 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 2923.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141486 bytes_read=359385 bytes_retransmit=9 bytes_invalid=0 send_seq=10302 receive_seq=10302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996835 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.3 mcu_temp: temp=33.1  sysload=0.29 cputime=149.342 memavail=713208 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 2924.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141492 bytes_read=359533 bytes_retransmit=9 bytes_invalid=0 send_seq=10303 receive_seq=10303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996836 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.9  sysload=0.29 cputime=149.372 memavail=713208 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 2925.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141498 bytes_read=359710 bytes_retransmit=9 bytes_invalid=0 send_seq=10304 receive_seq=10304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996834 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=33.2  sysload=0.29 cputime=149.403 memavail=712088 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 2926.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141504 bytes_read=359873 bytes_retransmit=9 bytes_invalid=0 send_seq=10305 receive_seq=10305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996833 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=33.1  sysload=0.29 cputime=149.433 memavail=711836 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 2927.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141510 bytes_read=360021 bytes_retransmit=9 bytes_invalid=0 send_seq=10306 receive_seq=10306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996833 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.1  sysload=0.27 cputime=149.464 memavail=711584 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 2928.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141516 bytes_read=360200 bytes_retransmit=9 bytes_invalid=0 send_seq=10307 receive_seq=10307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996834 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=33.0  sysload=0.27 cputime=149.495 memavail=711592 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 2929.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141522 bytes_read=360358 bytes_retransmit=9 bytes_invalid=0 send_seq=10308 receive_seq=10308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996835 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=33.0  sysload=0.27 cputime=149.525 memavail=711596 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 2930.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141528 bytes_read=360506 bytes_retransmit=9 bytes_invalid=0 send_seq=10309 receive_seq=10309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.1  sysload=0.27 cputime=149.556 memavail=711480 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 2931.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141534 bytes_read=360683 bytes_retransmit=9 bytes_invalid=0 send_seq=10310 receive_seq=10310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.27 cputime=149.586 memavail=711480 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 2932.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141540 bytes_read=360846 bytes_retransmit=9 bytes_invalid=0 send_seq=10311 receive_seq=10311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996847 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.0  sysload=0.57 cputime=149.618 memavail=711236 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 2933.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141546 bytes_read=361008 bytes_retransmit=9 bytes_invalid=0 send_seq=10312 receive_seq=10312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.57 cputime=149.648 memavail=711236 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 2934.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141552 bytes_read=361185 bytes_retransmit=9 bytes_invalid=0 send_seq=10313 receive_seq=10313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=32.9  sysload=0.57 cputime=149.678 memavail=710984 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 2935.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141558 bytes_read=361348 bytes_retransmit=9 bytes_invalid=0 send_seq=10314 receive_seq=10314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.1  sysload=0.57 cputime=149.708 memavail=710984 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 2936.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141564 bytes_read=361496 bytes_retransmit=9 bytes_invalid=0 send_seq=10315 receive_seq=10315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=0 temp=26.1 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=33.0  sysload=0.57 cputime=149.738 memavail=710480 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 2937.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141570 bytes_read=361673 bytes_retransmit=9 bytes_invalid=0 send_seq=10316 receive_seq=10316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.8  sysload=0.52 cputime=149.771 memavail=710684 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 2938.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141576 bytes_read=361850 bytes_retransmit=9 bytes_invalid=0 send_seq=10317 receive_seq=10317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.2 mcu_temp: temp=32.9  sysload=0.52 cputime=149.802 memavail=710492 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 2939.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141582 bytes_read=361998 bytes_retransmit=9 bytes_invalid=0 send_seq=10318 receive_seq=10318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996848 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.0  sysload=0.52 cputime=149.832 memavail=710492 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 2940.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141588 bytes_read=362175 bytes_retransmit=9 bytes_invalid=0 send_seq=10319 receive_seq=10319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.52 cputime=149.863 memavail=710492 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 2941.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141594 bytes_read=362338 bytes_retransmit=9 bytes_invalid=0 send_seq=10320 receive_seq=10320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.52 cputime=149.897 memavail=710708 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 2942.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141600 bytes_read=362486 bytes_retransmit=9 bytes_invalid=0 send_seq=10321 receive_seq=10321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=33.0  sysload=0.48 cputime=149.927 memavail=711004 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 2943.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141606 bytes_read=362692 bytes_retransmit=9 bytes_invalid=0 send_seq=10322 receive_seq=10322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.48 cputime=149.960 memavail=711004 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 2944.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141612 bytes_read=362840 bytes_retransmit=9 bytes_invalid=0 send_seq=10323 receive_seq=10323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=33.0  sysload=0.48 cputime=149.991 memavail=711292 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 2945.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141618 bytes_read=362988 bytes_retransmit=9 bytes_invalid=0 send_seq=10324 receive_seq=10324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.0  sysload=0.48 cputime=150.022 memavail=711296 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 2946.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141624 bytes_read=363180 bytes_retransmit=9 bytes_invalid=0 send_seq=10325 receive_seq=10325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=32.8  sysload=0.48 cputime=150.054 memavail=712596 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 2947.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141636 bytes_read=363344 bytes_retransmit=9 bytes_invalid=0 send_seq=10327 receive_seq=10327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=43.0 mcu_temp: temp=32.9  sysload=0.44 cputime=150.085 memavail=712856 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 2948.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141642 bytes_read=363521 bytes_retransmit=9 bytes_invalid=0 send_seq=10328 receive_seq=10328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=0 temp=25.9 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=32.7  sysload=0.44 cputime=150.117 memavail=712864 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 2949.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141648 bytes_read=363698 bytes_retransmit=9 bytes_invalid=0 send_seq=10329 receive_seq=10329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996836 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.5 mcu_temp: temp=32.8  sysload=0.44 cputime=150.147 memavail=712864 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 2950.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141654 bytes_read=363846 bytes_retransmit=9 bytes_invalid=0 send_seq=10330 receive_seq=10330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996835 heater_bed: target=0 temp=25.9 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.44 cputime=150.179 memavail=713656 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 2951.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141679 bytes_read=364019 bytes_retransmit=9 bytes_invalid=0 send_seq=10333 receive_seq=10333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996833 heater_bed: target=0 temp=25.9 pwm=0.000 raspberry_pi: temp=42.6 mcu_temp: temp=32.9  sysload=0.44 cputime=150.210 memavail=713656 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 2952.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=141685 bytes_read=364196 bytes_retransmit=9 bytes_invalid=0 send_seq=10334 receive_seq=10334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996834 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=33.0  sysload=0.41 cputime=150.241 memavail=713656 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 2953.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=141691 bytes_read=364350 bytes_retransmit=9 bytes_invalid=0 send_seq=10335 receive_seq=10335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=0 temp=25.9 pwm=0.000 raspberry_pi: temp=42.8 mcu_temp: temp=33.0  sysload=0.41 cputime=150.273 memavail=713612 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 2954.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=141697 bytes_read=364503 bytes_retransmit=9 bytes_invalid=0 send_seq=10336 receive_seq=10336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=0 temp=25.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=32.9  sysload=0.41 cputime=150.303 memavail=713612 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 2955.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=141703 bytes_read=364680 bytes_retransmit=9 bytes_invalid=0 send_seq=10337 receive_seq=10337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.9  sysload=0.41 cputime=150.335 memavail=714812 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 2956.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=141709 bytes_read=364828 bytes_retransmit=9 bytes_invalid=0 send_seq=10338 receive_seq=10338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=0 temp=25.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=32.7  sysload=0.41 cputime=150.366 memavail=715824 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 2957.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=141715 bytes_read=364991 bytes_retransmit=9 bytes_invalid=0 send_seq=10339 receive_seq=10339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996833 heater_bed: target=0 temp=26.0 pwm=0.000 raspberry_pi: temp=42.7 mcu_temp: temp=32.7  sysload=0.37 cputime=150.396 memavail=716100 print_time=1020.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-200-g7511151a'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri May 19 01:17:29 2023 (1684459049.9 34.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472998641568: New connection
webhooks client 281472998641568: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 38.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5273 bytes_read=6077 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=258 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=168001516 heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=37.6 mcu_temp: temp=0.0  sysload=2.35 cputime=5.090 memavail=717768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281472998641568
webhooks: registering remote method 'reboot_machine' for connection id: 281472998641568
webhooks: registering remote method 'pause_job_queue' for connection id: 281472998641568
webhooks: registering remote method 'start_job_queue' for connection id: 281472998641568
Stats 39.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5307 bytes_read=6212 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167997417 heater_bed: target=0 temp=24.3 pwm=0.000 raspberry_pi: temp=36.4 mcu_temp: temp=25.0  sysload=2.35 cputime=5.173 memavail=716572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 40.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5346 bytes_read=6375 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996496 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=37.0 mcu_temp: temp=24.9  sysload=2.40 cputime=5.207 memavail=716944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 41.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5352 bytes_read=6523 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996215 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=24.9  sysload=2.40 cputime=5.235 memavail=716944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 42.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000064 mcu_task_stddev=0.000206 bytes_write=5358 bytes_read=6717 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996547 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=25.1  sysload=2.40 cputime=5.259 memavail=717980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 43.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000064 mcu_task_stddev=0.000206 bytes_write=5364 bytes_read=6880 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996471 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=25.0  sysload=2.40 cputime=5.287 memavail=717980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 44.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000064 mcu_task_stddev=0.000206 bytes_write=5370 bytes_read=7028 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996396 heater_bed: target=0 temp=24.3 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=25.1  sysload=2.40 cputime=5.318 memavail=718988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 45.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000064 mcu_task_stddev=0.000206 bytes_write=5376 bytes_read=7205 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996413 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=25.2  sysload=2.21 cputime=5.351 memavail=717040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 46.9: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000064 mcu_task_stddev=0.000206 bytes_write=5382 bytes_read=7368 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996429 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=36.2 mcu_temp: temp=25.1  sysload=2.21 cputime=5.387 memavail=718148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 47.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5388 bytes_read=7530 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996524 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=37.0 mcu_temp: temp=25.1  sysload=2.21 cputime=5.426 memavail=717920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 48.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5394 bytes_read=7713 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=36.0 mcu_temp: temp=25.1  sysload=2.21 cputime=5.461 memavail=719888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 49.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5400 bytes_read=7854 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=36.3 mcu_temp: temp=25.2  sysload=2.21 cputime=5.492 memavail=720700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 50.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5406 bytes_read=8002 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996663 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=25.2  sysload=2.03 cputime=5.519 memavail=720448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 51.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5412 bytes_read=8194 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996684 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=25.4  sysload=2.03 cputime=5.548 memavail=720224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 52.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5418 bytes_read=8356 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996673 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=25.2  sysload=2.03 cputime=5.576 memavail=720504 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 53.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5424 bytes_read=8504 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996664 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=34.2 mcu_temp: temp=25.1  sysload=2.03 cputime=5.603 memavail=720252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 54.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5430 bytes_read=8696 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996710 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=35.7 mcu_temp: temp=25.2  sysload=2.03 cputime=5.635 memavail=715464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 55.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5436 bytes_read=8844 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996748 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=36.1 mcu_temp: temp=25.5  sysload=1.95 cputime=5.670 memavail=716736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 56.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5442 bytes_read=8992 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996787 heater_bed: target=0 temp=24.2 pwm=0.000 raspberry_pi: temp=37.2 mcu_temp: temp=25.3  sysload=1.95 cputime=5.707 memavail=724108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Heater heater_bed approaching new target of 60.000
Heater extruder approaching new target of 200.000
Stats 151.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6376 bytes_read=24636 bytes_retransmit=9 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=60 temp=23.9 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.2  sysload=0.83 cputime=8.449 memavail=726952 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=20.3 pwm=1.000
Stats 152.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6436 bytes_read=24784 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=24.1 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.2  sysload=0.83 cputime=8.482 memavail=726952 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=20.3 pwm=1.000
Stats 153.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6461 bytes_read=24971 bytes_retransmit=9 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=24.4 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.3  sysload=0.83 cputime=8.516 memavail=727204 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=20.6 pwm=1.000
Stats 154.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000026 mcu_task_stddev=0.000118 bytes_write=6505 bytes_read=25170 bytes_retransmit=9 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=24.7 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.4  sysload=0.83 cputime=8.549 memavail=726952 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=21.2 pwm=1.000
Stats 155.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000026 mcu_task_stddev=0.000118 bytes_write=6581 bytes_read=25348 bytes_retransmit=9 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=25.0 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.2  sysload=0.83 cputime=8.582 memavail=726448 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=22.1 pwm=1.000
Stats 156.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000026 mcu_task_stddev=0.000118 bytes_write=6615 bytes_read=25535 bytes_retransmit=9 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=60 temp=25.4 pwm=1.000 raspberry_pi: temp=36.9 mcu_temp: temp=26.3  sysload=0.76 cputime=8.615 memavail=726204 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=23.2 pwm=1.000
Stats 157.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000026 mcu_task_stddev=0.000118 bytes_write=6649 bytes_read=25708 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=60 temp=25.7 pwm=1.000 raspberry_pi: temp=36.7 mcu_temp: temp=26.4  sysload=0.76 cputime=8.647 memavail=726204 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=25.1 pwm=1.000
Stats 158.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000026 mcu_task_stddev=0.000118 bytes_write=6711 bytes_read=25876 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=60 temp=26.1 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.4  sysload=0.76 cputime=8.681 memavail=725704 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=26.7 pwm=1.000
Stats 159.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=6796 bytes_read=26098 bytes_retransmit=9 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996869 heater_bed: target=60 temp=26.5 pwm=1.000 raspberry_pi: temp=37.1 mcu_temp: temp=26.3  sysload=0.76 cputime=8.717 memavail=725204 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=28.5 pwm=1.000
Stats 160.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=6849 bytes_read=26281 bytes_retransmit=9 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=26.9 pwm=1.000 raspberry_pi: temp=36.9 mcu_temp: temp=26.1  sysload=0.76 cputime=8.750 memavail=724724 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=31.0 pwm=1.000
Stats 161.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=6904 bytes_read=26449 bytes_retransmit=9 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996871 heater_bed: target=60 temp=27.3 pwm=1.000 raspberry_pi: temp=37.4 mcu_temp: temp=26.2  sysload=0.70 cputime=8.782 memavail=724420 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=33.0 pwm=1.000
Stats 162.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=6948 bytes_read=26646 bytes_retransmit=9 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996870 heater_bed: target=60 temp=27.7 pwm=1.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.2  sysload=0.70 cputime=8.817 memavail=724480 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=35.2 pwm=1.000
Stats 163.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=7042 bytes_read=26839 bytes_retransmit=9 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=28.0 pwm=1.000 raspberry_pi: temp=37.4 mcu_temp: temp=26.3  sysload=0.70 cputime=8.849 memavail=724984 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=38.1 pwm=1.000
Stats 164.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=7095 bytes_read=27022 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=28.4 pwm=1.000 raspberry_pi: temp=37.0 mcu_temp: temp=26.1  sysload=0.70 cputime=8.882 memavail=724984 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=40.4 pwm=1.000
Stats 165.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=7150 bytes_read=27219 bytes_retransmit=9 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=29.0 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.2  sysload=0.70 cputime=8.916 memavail=725488 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=42.6 pwm=1.000
Stats 166.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=7188 bytes_read=27392 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=29.3 pwm=1.000 raspberry_pi: temp=37.1 mcu_temp: temp=26.1  sysload=0.65 cputime=8.949 memavail=724736 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=45.7 pwm=1.000
Stats 167.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=7241 bytes_read=27560 bytes_retransmit=9 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=60 temp=29.7 pwm=1.000 raspberry_pi: temp=37.0 mcu_temp: temp=26.2  sysload=0.65 cputime=8.983 memavail=724992 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=48.0 pwm=1.000
Stats 168.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=7330 bytes_read=27767 bytes_retransmit=9 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=30.1 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.3  sysload=0.65 cputime=9.016 memavail=724996 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=50.4 pwm=1.000
Stats 169.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7385 bytes_read=27965 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=60 temp=30.5 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.5  sysload=0.65 cputime=9.050 memavail=725196 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=53.4 pwm=1.000
Stats 170.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7438 bytes_read=28133 bytes_retransmit=9 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=60 temp=30.9 pwm=1.000 raspberry_pi: temp=37.4 mcu_temp: temp=26.3  sysload=0.65 cputime=9.082 memavail=725000 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=55.7 pwm=1.000
Stats 171.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7495 bytes_read=28330 bytes_retransmit=9 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=60 temp=31.3 pwm=1.000 raspberry_pi: temp=36.9 mcu_temp: temp=26.3  sysload=0.59 cputime=9.115 memavail=725192 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=58.0 pwm=1.000
Stats 172.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7575 bytes_read=28518 bytes_retransmit=9 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=60 temp=31.7 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.3  sysload=0.59 cputime=9.157 memavail=725036 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=61.0 pwm=1.000
Stats 173.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000032 bytes_write=7639 bytes_read=28686 bytes_retransmit=9 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=60 temp=32.0 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.2  sysload=0.59 cputime=9.189 memavail=725044 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=63.2 pwm=1.000
Stats 174.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7692 bytes_read=28898 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=60 temp=32.5 pwm=1.000 raspberry_pi: temp=37.1 mcu_temp: temp=26.5  sysload=0.59 cputime=9.223 memavail=725048 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=65.5 pwm=1.000
Stats 175.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7745 bytes_read=29081 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=60 temp=32.9 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.2  sysload=0.59 cputime=9.257 memavail=724796 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=68.4 pwm=1.000
Stats 176.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7834 bytes_read=29259 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=60 temp=33.1 pwm=1.000 raspberry_pi: temp=37.1 mcu_temp: temp=26.3  sysload=0.55 cputime=9.292 memavail=724544 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=70.6 pwm=1.000
Stats 177.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7889 bytes_read=29444 bytes_retransmit=9 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=60 temp=33.6 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=26.4  sysload=0.55 cputime=9.328 memavail=724040 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=72.7 pwm=1.000
Stats 178.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000033 bytes_write=7942 bytes_read=29621 bytes_retransmit=9 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=60 temp=33.9 pwm=1.000 raspberry_pi: temp=36.8 mcu_temp: temp=26.4  sysload=0.55 cputime=9.360 memavail=723996 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=75.6 pwm=1.000
Stats 179.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=7995 bytes_read=29804 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=60 temp=34.2 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.3  sysload=0.55 cputime=9.393 memavail=724300 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=77.7 pwm=1.000
Stats 180.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=8080 bytes_read=30011 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=60 temp=34.6 pwm=1.000 raspberry_pi: temp=37.1 mcu_temp: temp=26.3  sysload=0.55 cputime=9.427 memavail=724300 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=79.7 pwm=1.000
Stats 181.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=8144 bytes_read=30194 bytes_retransmit=9 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=60 temp=34.9 pwm=1.000 raspberry_pi: temp=37.1 mcu_temp: temp=26.2  sysload=0.82 cputime=9.462 memavail=724168 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=82.5 pwm=1.000
Stats 182.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=8197 bytes_read=30362 bytes_retransmit=9 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=60 temp=35.2 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.2  sysload=0.82 cputime=9.494 memavail=724444 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=84.5 pwm=1.000
Stats 183.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=8250 bytes_read=30559 bytes_retransmit=9 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=60 temp=35.6 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.2  sysload=0.82 cputime=9.528 memavail=723972 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=86.5 pwm=1.000
Stats 184.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8335 bytes_read=30767 bytes_retransmit=9 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=35.9 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.2  sysload=0.82 cputime=9.562 memavail=723972 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=89.2 pwm=1.000
Stats 185.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8388 bytes_read=30935 bytes_retransmit=9 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=36.2 pwm=1.000 raspberry_pi: temp=37.4 mcu_temp: temp=26.6  sysload=0.82 cputime=9.598 memavail=723972 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=91.1 pwm=1.000
Stats 186.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8443 bytes_read=31132 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=60 temp=36.5 pwm=1.000 raspberry_pi: temp=37.3 mcu_temp: temp=26.3  sysload=0.76 cputime=9.632 memavail=723972 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=93.0 pwm=1.000
Stats 187.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8496 bytes_read=31315 bytes_retransmit=9 bytes_invalid=0 send_seq=590 receive_seq=590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996950 heater_bed: target=60 temp=36.8 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.5  sysload=0.76 cputime=9.668 memavail=724236 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=95.6 pwm=1.000
Stats 188.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8553 bytes_read=31483 bytes_retransmit=9 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=37.1 pwm=1.000 raspberry_pi: temp=37.5 mcu_temp: temp=26.5  sysload=0.76 cputime=9.700 memavail=724236 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=97.5 pwm=1.000
Stats 189.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8614 bytes_read=31690 bytes_retransmit=9 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996951 heater_bed: target=60 temp=37.5 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.5  sysload=0.76 cputime=9.734 memavail=724236 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=99.4 pwm=1.000
Stats 190.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8669 bytes_read=31873 bytes_retransmit=9 bytes_invalid=0 send_seq=604 receive_seq=604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996947 heater_bed: target=60 temp=37.7 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.6  sysload=0.76 cputime=9.770 memavail=724236 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=101.8 pwm=1.000
Stats 191.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8717 bytes_read=32041 bytes_retransmit=9 bytes_invalid=0 send_seq=609 receive_seq=609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=60 temp=38.0 pwm=1.000 raspberry_pi: temp=37.5 mcu_temp: temp=26.5  sysload=0.70 cputime=9.802 memavail=724268 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=103.6 pwm=1.000
Stats 192.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8751 bytes_read=32228 bytes_retransmit=9 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=38.3 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.5  sysload=0.70 cputime=9.836 memavail=724276 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=105.4 pwm=1.000
Stats 193.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=8836 bytes_read=32421 bytes_retransmit=9 bytes_invalid=0 send_seq=619 receive_seq=619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=60 temp=38.6 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.4  sysload=0.70 cputime=9.870 memavail=724028 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=107.8 pwm=1.000
Stats 194.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=8890 bytes_read=32604 bytes_retransmit=9 bytes_invalid=0 send_seq=625 receive_seq=624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996933 heater_bed: target=60 temp=38.8 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.5  sysload=0.70 cputime=9.903 memavail=723776 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=109.5 pwm=1.000
Stats 195.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=8924 bytes_read=32807 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996928 heater_bed: target=60 temp=39.2 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.7  sysload=0.70 cputime=9.936 memavail=723552 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=111.3 pwm=1.000
Stats 196.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=8979 bytes_read=32990 bytes_retransmit=9 bytes_invalid=0 send_seq=633 receive_seq=633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=60 temp=39.5 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=26.6  sysload=0.72 cputime=9.969 memavail=723768 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=113.5 pwm=1.000
Stats 197.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=9055 bytes_read=33168 bytes_retransmit=9 bytes_invalid=0 send_seq=640 receive_seq=640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=60 temp=39.7 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.5  sysload=0.72 cputime=10.001 memavail=723564 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=115.2 pwm=1.000
Stats 198.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=9112 bytes_read=33365 bytes_retransmit=9 bytes_invalid=0 send_seq=645 receive_seq=645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=60 temp=40.1 pwm=1.000 raspberry_pi: temp=38.1 mcu_temp: temp=26.4  sysload=0.72 cputime=10.034 memavail=723816 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=116.9 pwm=1.000
Stats 199.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=9165 bytes_read=33563 bytes_retransmit=9 bytes_invalid=0 send_seq=650 receive_seq=650 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=60 temp=40.3 pwm=1.000 raspberry_pi: temp=38.3 mcu_temp: temp=26.4  sysload=0.72 cputime=10.069 memavail=723568 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=119.1 pwm=1.000
Stats 200.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=9218 bytes_read=33731 bytes_retransmit=9 bytes_invalid=0 send_seq=655 receive_seq=655 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996919 heater_bed: target=60 temp=40.5 pwm=1.000 raspberry_pi: temp=38.0 mcu_temp: temp=26.6  sysload=0.72 cputime=10.101 memavail=723820 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=120.7 pwm=1.000
Stats 201.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=9309 bytes_read=33933 bytes_retransmit=9 bytes_invalid=0 send_seq=661 receive_seq=661 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=40.9 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=26.5  sysload=0.74 cputime=10.136 memavail=723472 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=122.3 pwm=1.000
Stats 202.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=9362 bytes_read=34109 bytes_retransmit=9 bytes_invalid=0 send_seq=666 receive_seq=666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=41.1 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.6  sysload=0.74 cputime=10.169 memavail=723732 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=124.4 pwm=1.000
Stats 203.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=9406 bytes_read=34267 bytes_retransmit=9 bytes_invalid=0 send_seq=671 receive_seq=671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=60 temp=41.4 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.7  sysload=0.74 cputime=10.203 memavail=723736 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=126.0 pwm=1.000
Stats 204.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=9459 bytes_read=34477 bytes_retransmit=9 bytes_invalid=0 send_seq=676 receive_seq=676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=41.7 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.7  sysload=0.74 cputime=10.237 memavail=723988 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=127.6 pwm=1.000
Stats 205.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=9543 bytes_read=34662 bytes_retransmit=9 bytes_invalid=0 send_seq=682 receive_seq=682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=60 temp=41.9 pwm=1.000 raspberry_pi: temp=37.3 mcu_temp: temp=26.7  sysload=0.74 cputime=10.273 memavail=723988 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=129.7 pwm=1.000
Stats 206.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=9587 bytes_read=34827 bytes_retransmit=9 bytes_invalid=0 send_seq=687 receive_seq=687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=42.2 pwm=1.000 raspberry_pi: temp=38.7 mcu_temp: temp=26.7  sysload=0.84 cputime=10.316 memavail=724040 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=131.2 pwm=1.000
Stats 207.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=9623 bytes_read=35025 bytes_retransmit=9 bytes_invalid=0 send_seq=690 receive_seq=690 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=60 temp=42.5 pwm=1.000 raspberry_pi: temp=38.0 mcu_temp: temp=26.8  sysload=0.84 cputime=10.351 memavail=724548 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=133.2 pwm=1.000
Stats 208.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=9676 bytes_read=35190 bytes_retransmit=9 bytes_invalid=0 send_seq=695 receive_seq=695 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=60 temp=42.8 pwm=1.000 raspberry_pi: temp=37.5 mcu_temp: temp=26.6  sysload=0.84 cputime=10.384 memavail=724556 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=134.7 pwm=1.000
Stats 209.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=9733 bytes_read=35370 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=60 temp=43.0 pwm=1.000 raspberry_pi: temp=37.7 mcu_temp: temp=26.7  sysload=0.84 cputime=10.417 memavail=724808 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=136.2 pwm=1.000
Stats 210.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=9794 bytes_read=35573 bytes_retransmit=9 bytes_invalid=0 send_seq=704 receive_seq=704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=60 temp=43.3 pwm=1.000 raspberry_pi: temp=37.0 mcu_temp: temp=26.6  sysload=0.84 cputime=10.451 memavail=724808 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=138.1 pwm=1.000
Stats 211.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=9847 bytes_read=35738 bytes_retransmit=9 bytes_invalid=0 send_seq=709 receive_seq=709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=60 temp=43.5 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.7  sysload=0.86 cputime=10.484 memavail=724808 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=139.5 pwm=1.000
Stats 212.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=9900 bytes_read=35903 bytes_retransmit=9 bytes_invalid=0 send_seq=714 receive_seq=714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=43.8 pwm=1.000 raspberry_pi: temp=37.9 mcu_temp: temp=26.9  sysload=0.86 cputime=10.520 memavail=724808 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=141.0 pwm=1.000
Stats 213.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000032 bytes_write=9955 bytes_read=36111 bytes_retransmit=9 bytes_invalid=0 send_seq=719 receive_seq=719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=44.1 pwm=1.000 raspberry_pi: temp=38.3 mcu_temp: temp=26.6  sysload=0.86 cputime=10.557 memavail=725096 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=142.8 pwm=1.000
Stats 214.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10040 bytes_read=36301 bytes_retransmit=9 bytes_invalid=0 send_seq=726 receive_seq=726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=60 temp=44.3 pwm=1.000 raspberry_pi: temp=37.4 mcu_temp: temp=26.7  sysload=0.86 cputime=10.595 memavail=724844 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=144.2 pwm=1.000
Stats 215.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10084 bytes_read=36466 bytes_retransmit=9 bytes_invalid=0 send_seq=731 receive_seq=731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=60 temp=44.5 pwm=1.000 raspberry_pi: temp=37.4 mcu_temp: temp=26.8  sysload=0.86 cputime=10.632 memavail=724600 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=145.6 pwm=1.000
Stats 216.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10132 bytes_read=36669 bytes_retransmit=9 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=60 temp=44.8 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.7  sysload=0.87 cputime=10.671 memavail=725108 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=147.4 pwm=1.000
Stats 217.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10185 bytes_read=36834 bytes_retransmit=9 bytes_invalid=0 send_seq=740 receive_seq=740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=60 temp=45.1 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=26.8  sysload=0.87 cputime=10.708 memavail=725108 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=148.7 pwm=1.000
Stats 218.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10270 bytes_read=37009 bytes_retransmit=9 bytes_invalid=0 send_seq=747 receive_seq=747 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=60 temp=45.3 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.8  sysload=0.87 cputime=10.746 memavail=725116 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=150.0 pwm=1.000
Stats 219.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=10316 bytes_read=37232 bytes_retransmit=9 bytes_invalid=0 send_seq=752 receive_seq=752 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996888 heater_bed: target=60 temp=45.6 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=26.7  sysload=0.87 cputime=10.785 memavail=725116 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=151.8 pwm=1.000
Stats 220.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=10382 bytes_read=37397 bytes_retransmit=9 bytes_invalid=0 send_seq=757 receive_seq=757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=60 temp=45.8 pwm=1.000 raspberry_pi: temp=37.7 mcu_temp: temp=26.7  sysload=0.87 cputime=10.822 memavail=725116 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=153.1 pwm=1.000
Stats 221.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=10416 bytes_read=37552 bytes_retransmit=9 bytes_invalid=0 send_seq=760 receive_seq=760 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=60 temp=46.0 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.8  sysload=0.80 cputime=10.858 memavail=725368 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=154.4 pwm=1.000
Stats 222.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=10492 bytes_read=37770 bytes_retransmit=9 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=46.3 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=26.8  sysload=0.80 cputime=10.897 memavail=725620 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=156.1 pwm=1.000
Stats 223.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=10545 bytes_read=37935 bytes_retransmit=9 bytes_invalid=0 send_seq=772 receive_seq=772 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=46.5 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.7  sysload=0.80 cputime=10.935 memavail=725884 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=157.4 pwm=1.000
Stats 224.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10583 bytes_read=38120 bytes_retransmit=9 bytes_invalid=0 send_seq=775 receive_seq=775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=60 temp=46.8 pwm=1.000 raspberry_pi: temp=38.0 mcu_temp: temp=26.8  sysload=0.80 cputime=10.972 memavail=725636 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=158.6 pwm=1.000
Stats 225.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10627 bytes_read=38313 bytes_retransmit=9 bytes_invalid=0 send_seq=780 receive_seq=780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=60 temp=47.1 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=26.9  sysload=0.80 cputime=11.008 memavail=725836 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=160.3 pwm=1.000
Stats 226.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10714 bytes_read=38488 bytes_retransmit=9 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=47.3 pwm=1.000 raspberry_pi: temp=37.9 mcu_temp: temp=26.8  sysload=0.73 cputime=11.046 memavail=725636 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=161.5 pwm=1.000
Stats 227.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10758 bytes_read=38668 bytes_retransmit=9 bytes_invalid=0 send_seq=792 receive_seq=792 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=47.6 pwm=1.000 raspberry_pi: temp=37.9 mcu_temp: temp=26.9  sysload=0.73 cputime=11.083 memavail=725636 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=162.7 pwm=1.000
Stats 228.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000028 bytes_write=10815 bytes_read=38849 bytes_retransmit=9 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=60 temp=47.7 pwm=1.000 raspberry_pi: temp=37.5 mcu_temp: temp=26.9  sysload=0.73 cputime=11.121 memavail=725140 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=164.3 pwm=1.000
Stats 229.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000030 bytes_write=10849 bytes_read=39012 bytes_retransmit=9 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=60 temp=48.0 pwm=1.000 raspberry_pi: temp=37.5 mcu_temp: temp=26.7  sysload=0.73 cputime=11.157 memavail=725140 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=165.5 pwm=1.000
Stats 230.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000030 bytes_write=10893 bytes_read=39192 bytes_retransmit=9 bytes_invalid=0 send_seq=805 receive_seq=805 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=48.3 pwm=1.000 raspberry_pi: temp=37.2 mcu_temp: temp=26.9  sysload=0.73 cputime=11.195 memavail=725140 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=166.7 pwm=1.000
Stats 231.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000030 bytes_write=10969 bytes_read=39395 bytes_retransmit=9 bytes_invalid=0 send_seq=812 receive_seq=812 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=48.5 pwm=1.000 raspberry_pi: temp=37.9 mcu_temp: temp=26.9  sysload=0.68 cputime=11.234 memavail=725144 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=168.2 pwm=1.000
Stats 232.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000030 bytes_write=11022 bytes_read=39560 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=48.7 pwm=1.000 raspberry_pi: temp=38.1 mcu_temp: temp=27.1  sysload=0.68 cputime=11.271 memavail=725144 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=169.3 pwm=1.000
Stats 233.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000030 bytes_write=11075 bytes_read=39740 bytes_retransmit=9 bytes_invalid=0 send_seq=822 receive_seq=822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=60 temp=49.0 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=27.0  sysload=0.68 cputime=11.311 memavail=725144 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=170.4 pwm=1.000
Stats 234.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=11130 bytes_read=39948 bytes_retransmit=9 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=49.2 pwm=1.000 raspberry_pi: temp=38.5 mcu_temp: temp=26.9  sysload=0.68 cputime=11.350 memavail=724900 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=171.9 pwm=1.000
Stats 235.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=11196 bytes_read=40113 bytes_retransmit=9 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=60 temp=49.4 pwm=1.000 raspberry_pi: temp=38.0 mcu_temp: temp=27.1  sysload=0.68 cputime=11.388 memavail=724848 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=172.9 pwm=1.000
Stats 236.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=11230 bytes_read=40283 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=60 temp=49.7 pwm=1.000 raspberry_pi: temp=38.1 mcu_temp: temp=26.9  sysload=0.62 cputime=11.424 memavail=724900 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=174.0 pwm=1.000
Stats 237.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=11285 bytes_read=40476 bytes_retransmit=9 bytes_invalid=0 send_seq=840 receive_seq=840 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=49.9 pwm=1.000 raspberry_pi: temp=38.1 mcu_temp: temp=26.9  sysload=0.62 cputime=11.463 memavail=724900 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=175.5 pwm=1.000
Stats 238.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=11329 bytes_read=40641 bytes_retransmit=9 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=50.1 pwm=1.000 raspberry_pi: temp=37.9 mcu_temp: temp=27.0  sysload=0.62 cputime=11.500 memavail=724404 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=176.6 pwm=1.000
Stats 239.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=11405 bytes_read=40846 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=50.3 pwm=1.000 raspberry_pi: temp=38.6 mcu_temp: temp=27.1  sysload=0.62 cputime=11.539 memavail=724412 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=177.7 pwm=1.000
Stats 240.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=11458 bytes_read=41039 bytes_retransmit=9 bytes_invalid=0 send_seq=857 receive_seq=857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=50.6 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=27.0  sysload=0.62 cputime=11.577 memavail=724664 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=179.1 pwm=1.000
Stats 241.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=11496 bytes_read=41194 bytes_retransmit=9 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=50.8 pwm=1.000 raspberry_pi: temp=37.9 mcu_temp: temp=27.1  sysload=0.57 cputime=11.614 memavail=724664 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.1 pwm=1.000
Stats 242.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=11542 bytes_read=41374 bytes_retransmit=9 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=51.0 pwm=1.000 raspberry_pi: temp=38.1 mcu_temp: temp=26.9  sysload=0.57 cputime=11.652 memavail=724916 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.1 pwm=1.000
Stats 243.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=11608 bytes_read=41567 bytes_retransmit=9 bytes_invalid=0 send_seq=870 receive_seq=870 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=60 temp=51.2 pwm=1.000 raspberry_pi: temp=37.6 mcu_temp: temp=26.9  sysload=0.57 cputime=11.691 memavail=724416 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=182.6 pwm=1.000
Stats 244.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11652 bytes_read=41747 bytes_retransmit=9 bytes_invalid=0 send_seq=875 receive_seq=875 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996988 heater_bed: target=60 temp=51.5 pwm=1.000 raspberry_pi: temp=38.2 mcu_temp: temp=26.9  sysload=0.57 cputime=11.728 memavail=724452 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.6 pwm=1.000
Stats 245.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11700 bytes_read=41927 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 heater_bed: target=60 temp=51.7 pwm=1.000 raspberry_pi: temp=37.8 mcu_temp: temp=27.1  sysload=0.57 cputime=11.765 memavail=724704 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.6 pwm=1.000
Stats 246.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11753 bytes_read=42120 bytes_retransmit=9 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996978 heater_bed: target=60 temp=51.9 pwm=1.000 raspberry_pi: temp=38.5 mcu_temp: temp=27.2  sysload=0.53 cputime=11.803 memavail=724704 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=186.0 pwm=1.000
Stats 247.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11819 bytes_read=42285 bytes_retransmit=9 bytes_invalid=0 send_seq=890 receive_seq=890 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996973 heater_bed: target=60 temp=52.2 pwm=1.000 raspberry_pi: temp=38.5 mcu_temp: temp=27.1  sysload=0.53 cputime=11.840 memavail=724964 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.0 pwm=1.000
Stats 248.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=11863 bytes_read=42465 bytes_retransmit=9 bytes_invalid=0 send_seq=895 receive_seq=895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=60 temp=52.4 pwm=1.000 raspberry_pi: temp=38.4 mcu_temp: temp=27.3  sysload=0.53 cputime=11.879 memavail=725468 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.9 pwm=1.000
Stats 249.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=11923 bytes_read=42678 bytes_retransmit=9 bytes_invalid=0 send_seq=901 receive_seq=901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996963 heater_bed: target=60 temp=52.6 pwm=1.000 raspberry_pi: temp=38.5 mcu_temp: temp=27.0  sysload=0.53 cputime=11.919 memavail=725720 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.3 pwm=0.930
Stats 250.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=11976 bytes_read=42843 bytes_retransmit=9 bytes_invalid=0 send_seq=906 receive_seq=906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=52.8 pwm=1.000 raspberry_pi: temp=38.1 mcu_temp: temp=27.1  sysload=0.53 cputime=11.957 memavail=726484 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.3 pwm=0.930
Stats 251.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=12038 bytes_read=43028 bytes_retransmit=9 bytes_invalid=0 send_seq=912 receive_seq=912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996965 heater_bed: target=60 temp=53.1 pwm=1.000 raspberry_pi: temp=37.7 mcu_temp: temp=27.0  sysload=0.48 cputime=11.995 memavail=726484 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.3 pwm=0.852
Stats 252.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=12098 bytes_read=43226 bytes_retransmit=9 bytes_invalid=0 send_seq=918 receive_seq=918 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996972 heater_bed: target=60 temp=53.3 pwm=1.000 raspberry_pi: temp=38.2 mcu_temp: temp=27.1  sysload=0.48 cputime=12.033 memavail=726232 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.5 pwm=0.799
Stats 253.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=12158 bytes_read=43393 bytes_retransmit=9 bytes_invalid=0 send_seq=924 receive_seq=924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996975 heater_bed: target=60 temp=53.5 pwm=1.000 raspberry_pi: temp=38.3 mcu_temp: temp=27.2  sysload=0.48 cputime=12.072 memavail=725728 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.3 pwm=0.799
Stats 254.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12206 bytes_read=43577 bytes_retransmit=9 bytes_invalid=0 send_seq=929 receive_seq=929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996971 heater_bed: target=60 temp=53.7 pwm=1.000 raspberry_pi: temp=38.4 mcu_temp: temp=27.1  sysload=0.48 cputime=12.109 memavail=726296 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.1 pwm=0.799
Stats 255.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12266 bytes_read=43772 bytes_retransmit=9 bytes_invalid=0 send_seq=935 receive_seq=935 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=60 temp=53.9 pwm=1.000 raspberry_pi: temp=38.6 mcu_temp: temp=27.1  sysload=0.48 cputime=12.148 memavail=726552 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.0 pwm=0.742
Heater extruder within range of 200.000
Stats 256.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12322 bytes_read=43948 bytes_retransmit=9 bytes_invalid=0 send_seq=940 receive_seq=940 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996967 heater_bed: target=60 temp=54.1 pwm=1.000 raspberry_pi: temp=38.5 mcu_temp: temp=27.2  sysload=0.44 cputime=12.187 memavail=726804 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.7 pwm=0.742
Stats 257.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12356 bytes_read=44118 bytes_retransmit=9 bytes_invalid=0 send_seq=943 receive_seq=943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996960 heater_bed: target=60 temp=54.4 pwm=1.000 raspberry_pi: temp=38.5 mcu_temp: temp=27.3  sysload=0.44 cputime=12.224 memavail=726552 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.2 pwm=0.742
Stats 258.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12413 bytes_read=44311 bytes_retransmit=9 bytes_invalid=0 send_seq=948 receive_seq=948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996957 heater_bed: target=60 temp=54.6 pwm=0.932 raspberry_pi: temp=38.0 mcu_temp: temp=27.1  sysload=0.44 cputime=12.262 memavail=726000 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.9 pwm=0.691
Stats 259.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=12461 bytes_read=44491 bytes_retransmit=9 bytes_invalid=0 send_seq=953 receive_seq=953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=54.8 pwm=0.932 raspberry_pi: temp=38.5 mcu_temp: temp=27.1  sysload=0.44 cputime=12.300 memavail=726816 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.3 pwm=0.691
Stats 260.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=12486 bytes_read=44661 bytes_retransmit=9 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=55.0 pwm=0.932 raspberry_pi: temp=38.9 mcu_temp: temp=27.0  sysload=0.44 cputime=12.333 memavail=726564 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.7 pwm=0.691
Heater heater_bed within range of 60.000
Stats 261.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=12573 bytes_read=44864 bytes_retransmit=9 bytes_invalid=0 send_seq=963 receive_seq=963 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996946 heater_bed: target=60 temp=55.2 pwm=0.898 raspberry_pi: temp=38.1 mcu_temp: temp=27.1  sysload=0.41 cputime=12.370 memavail=726552 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.0 pwm=0.773
Stats 262.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=12614 bytes_read=45024 bytes_retransmit=9 bytes_invalid=0 send_seq=967 receive_seq=967 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=55.3 pwm=0.848 raspberry_pi: temp=38.1 mcu_temp: temp=27.2  sysload=0.41 cputime=12.402 memavail=726628 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.3 pwm=0.773
Stats 263.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=12741 bytes_read=45214 bytes_retransmit=9 bytes_invalid=0 send_seq=974 receive_seq=974 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996939 heater_bed: target=60 temp=55.5 pwm=1.000 raspberry_pi: temp=38.5 mcu_temp: temp=27.1  sysload=0.41 cputime=12.438 memavail=726772 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.5 pwm=0.773
Stats 264.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000062 bytes_write=12827 bytes_read=45427 bytes_retransmit=9 bytes_invalid=0 send_seq=980 receive_seq=980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996934 heater_bed: target=60 temp=55.7 pwm=0.894 raspberry_pi: temp=38.7 mcu_temp: temp=27.2  sysload=0.41 cputime=12.475 memavail=726388 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.8 pwm=0.720
Stats 265.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000062 bytes_write=12884 bytes_read=45592 bytes_retransmit=9 bytes_invalid=0 send_seq=985 receive_seq=985 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=55.9 pwm=0.860 raspberry_pi: temp=38.7 mcu_temp: temp=27.3  sysload=0.41 cputime=12.508 memavail=726640 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.0 pwm=0.720
Stats 266.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000062 bytes_write=12973 bytes_read=45782 bytes_retransmit=9 bytes_invalid=0 send_seq=992 receive_seq=992 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996929 heater_bed: target=60 temp=56.1 pwm=0.843 raspberry_pi: temp=38.3 mcu_temp: temp=27.2  sysload=0.38 cputime=12.543 memavail=725944 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.667
Stats 267.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000062 bytes_write=13046 bytes_read=45980 bytes_retransmit=9 bytes_invalid=0 send_seq=998 receive_seq=998 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=60 temp=56.2 pwm=0.877 raspberry_pi: temp=38.7 mcu_temp: temp=27.1  sysload=0.38 cputime=12.577 memavail=725724 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.667
Stats 268.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000062 bytes_write=13071 bytes_read=46135 bytes_retransmit=9 bytes_invalid=0 send_seq=1001 receive_seq=1001 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996926 heater_bed: target=60 temp=56.4 pwm=0.877 raspberry_pi: temp=38.3 mcu_temp: temp=27.2  sysload=0.38 cputime=12.611 memavail=724968 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.667
Stats 269.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=13117 bytes_read=46330 bytes_retransmit=9 bytes_invalid=0 send_seq=1006 receive_seq=1006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=60 temp=56.6 pwm=0.877 raspberry_pi: temp=38.6 mcu_temp: temp=27.2  sysload=0.38 cputime=12.645 memavail=725228 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.667
Stats 270.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=13205 bytes_read=46528 bytes_retransmit=9 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=60 temp=56.7 pwm=0.758 raspberry_pi: temp=38.8 mcu_temp: temp=27.5  sysload=0.38 cputime=12.680 memavail=725480 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.661
Stats 271.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=13241 bytes_read=46683 bytes_retransmit=9 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=60 temp=56.8 pwm=0.849 raspberry_pi: temp=38.1 mcu_temp: temp=27.2  sysload=0.43 cputime=12.715 memavail=725800 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.661
Stats 272.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=13298 bytes_read=46863 bytes_retransmit=9 bytes_invalid=0 send_seq=1020 receive_seq=1020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996915 heater_bed: target=60 temp=57.0 pwm=0.804 raspberry_pi: temp=38.3 mcu_temp: temp=27.2  sysload=0.43 cputime=12.749 memavail=726056 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.661
Stats 273.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=13339 bytes_read=47051 bytes_retransmit=9 bytes_invalid=0 send_seq=1024 receive_seq=1024 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=60 temp=57.1 pwm=0.804 raspberry_pi: temp=38.0 mcu_temp: temp=27.3  sysload=0.43 cputime=12.783 memavail=725580 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.661
Stats 274.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13407 bytes_read=47231 bytes_retransmit=9 bytes_invalid=0 send_seq=1029 receive_seq=1029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=60 temp=57.3 pwm=0.741 raspberry_pi: temp=38.5 mcu_temp: temp=27.2  sysload=0.43 cputime=12.818 memavail=725868 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.636
Stats 275.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13448 bytes_read=47406 bytes_retransmit=9 bytes_invalid=0 send_seq=1033 receive_seq=1033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996909 heater_bed: target=60 temp=57.4 pwm=0.748 raspberry_pi: temp=38.3 mcu_temp: temp=27.1  sysload=0.43 cputime=12.853 memavail=725868 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.636
Stats 276.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13505 bytes_read=47599 bytes_retransmit=9 bytes_invalid=0 send_seq=1038 receive_seq=1038 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=60 temp=57.5 pwm=0.826 raspberry_pi: temp=38.1 mcu_temp: temp=27.3  sysload=0.39 cputime=12.887 memavail=725868 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.636
Stats 277.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13561 bytes_read=47759 bytes_retransmit=9 bytes_invalid=0 send_seq=1042 receive_seq=1042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=57.7 pwm=0.769 raspberry_pi: temp=37.9 mcu_temp: temp=27.2  sysload=0.39 cputime=12.921 memavail=725996 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.636
Stats 278.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13586 bytes_read=47929 bytes_retransmit=9 bytes_invalid=0 send_seq=1045 receive_seq=1045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=57.8 pwm=0.769 raspberry_pi: temp=38.4 mcu_temp: temp=27.4  sysload=0.39 cputime=12.953 memavail=726000 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.636
Stats 279.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13643 bytes_read=48127 bytes_retransmit=9 bytes_invalid=0 send_seq=1050 receive_seq=1050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=60 temp=57.9 pwm=0.695 raspberry_pi: temp=38.5 mcu_temp: temp=27.4  sysload=0.39 cputime=12.989 memavail=725748 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.661
Stats 280.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13679 bytes_read=48275 bytes_retransmit=9 bytes_invalid=0 send_seq=1053 receive_seq=1053 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=60 temp=58.0 pwm=0.746 raspberry_pi: temp=38.2 mcu_temp: temp=27.3  sysload=0.39 cputime=13.022 memavail=725804 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.661
Stats 281.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13804 bytes_read=48460 bytes_retransmit=9 bytes_invalid=0 send_seq=1059 receive_seq=1059 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996909 heater_bed: target=60 temp=58.1 pwm=0.754 raspberry_pi: temp=37.9 mcu_temp: temp=27.3  sysload=0.36 cputime=13.057 memavail=725804 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.661
Stats 282.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13846 bytes_read=48648 bytes_retransmit=9 bytes_invalid=0 send_seq=1063 receive_seq=1063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=60 temp=58.2 pwm=0.754 raspberry_pi: temp=38.2 mcu_temp: temp=27.5  sysload=0.36 cputime=13.092 memavail=726056 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.661
Stats 283.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13903 bytes_read=48813 bytes_retransmit=9 bytes_invalid=0 send_seq=1068 receive_seq=1068 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=60 temp=58.4 pwm=0.692 raspberry_pi: temp=38.6 mcu_temp: temp=27.6  sysload=0.36 cputime=13.125 memavail=726256 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.685
Stats 284.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=13939 bytes_read=48998 bytes_retransmit=9 bytes_invalid=0 send_seq=1071 receive_seq=1071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=60 temp=58.5 pwm=0.692 raspberry_pi: temp=38.5 mcu_temp: temp=27.5  sysload=0.36 cputime=13.160 memavail=726820 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.634
Stats 285.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=13996 bytes_read=49191 bytes_retransmit=9 bytes_invalid=0 send_seq=1076 receive_seq=1076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=60 temp=58.6 pwm=0.678 raspberry_pi: temp=38.7 mcu_temp: temp=27.3  sysload=0.36 cputime=13.195 memavail=726820 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.634
Stats 286.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=14040 bytes_read=49356 bytes_retransmit=9 bytes_invalid=0 send_seq=1081 receive_seq=1081 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996903 heater_bed: target=60 temp=58.7 pwm=0.678 raspberry_pi: temp=38.4 mcu_temp: temp=27.5  sysload=0.33 cputime=13.230 memavail=726824 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.634
Stats 287.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=14065 bytes_read=49526 bytes_retransmit=9 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=58.8 pwm=0.619 raspberry_pi: temp=38.4 mcu_temp: temp=27.6  sysload=0.33 cputime=13.263 memavail=726772 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.634
Stats 288.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000065 bytes_write=14138 bytes_read=49719 bytes_retransmit=9 bytes_invalid=0 send_seq=1090 receive_seq=1089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=58.8 pwm=0.682 raspberry_pi: temp=38.8 mcu_temp: temp=27.5  sysload=0.33 cputime=13.296 memavail=727076 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.650
Stats 289.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14174 bytes_read=49894 bytes_retransmit=9 bytes_invalid=0 send_seq=1093 receive_seq=1093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=60 temp=58.9 pwm=0.607 raspberry_pi: temp=38.9 mcu_temp: temp=27.5  sysload=0.33 cputime=13.329 memavail=727084 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.650
Stats 290.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14247 bytes_read=50079 bytes_retransmit=9 bytes_invalid=0 send_seq=1099 receive_seq=1099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=60 temp=59.1 pwm=0.583 raspberry_pi: temp=38.5 mcu_temp: temp=27.6  sysload=0.33 cputime=13.362 memavail=727084 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.650
Stats 291.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14288 bytes_read=50267 bytes_retransmit=9 bytes_invalid=0 send_seq=1103 receive_seq=1103 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=60 temp=59.1 pwm=0.639 raspberry_pi: temp=38.0 mcu_temp: temp=27.5  sysload=0.30 cputime=13.399 memavail=727616 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.650
Stats 292.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14313 bytes_read=50422 bytes_retransmit=9 bytes_invalid=0 send_seq=1106 receive_seq=1106 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=60 temp=59.2 pwm=0.639 raspberry_pi: temp=38.8 mcu_temp: temp=27.5  sysload=0.30 cputime=13.431 memavail=727364 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.650
Stats 293.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=14370 bytes_read=50602 bytes_retransmit=9 bytes_invalid=0 send_seq=1111 receive_seq=1111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996897 heater_bed: target=60 temp=59.3 pwm=0.639 raspberry_pi: temp=38.5 mcu_temp: temp=27.5  sysload=0.30 cputime=13.464 memavail=727616 print_time=152.693 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.594
Starting SD card print (position 0)
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
Stats 294.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=15342 bytes_read=51487 bytes_retransmit=9 bytes_invalid=0 send_seq=1166 receive_seq=1163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=60 temp=59.3 pwm=0.586 raspberry_pi: temp=38.9 mcu_temp: temp=27.7 sd_pos=33145 sysload=0.30 cputime=13.657 memavail=722636 print_time=296.653 buffer_time=0.249 print_stall=0 extruder: target=200 temp=200.3 pwm=0.594
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 295.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=16540 bytes_read=52617 bytes_retransmit=9 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=59.4 pwm=0.646 raspberry_pi: temp=40.2 mcu_temp: temp=27.6 sd_pos=33145 sysload=0.30 cputime=13.823 memavail=722852 print_time=297.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.644
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000000
Stats 296.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=17303 bytes_read=53466 bytes_retransmit=9 bytes_invalid=0 send_seq=1287 receive_seq=1287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=59.5 pwm=0.561 raspberry_pi: temp=39.3 mcu_temp: temp=27.6 sd_pos=33145 sysload=0.28 cputime=13.934 memavail=722904 print_time=298.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 297.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=17803 bytes_read=54077 bytes_retransmit=9 bytes_invalid=0 send_seq=1326 receive_seq=1326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=59.6 pwm=0.615 raspberry_pi: temp=39.0 mcu_temp: temp=27.5 sd_pos=33145 sysload=0.28 cputime=14.008 memavail=722628 print_time=299.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 298.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=18324 bytes_read=54670 bytes_retransmit=9 bytes_invalid=0 send_seq=1367 receive_seq=1367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=59.6 pwm=0.559 raspberry_pi: temp=39.0 mcu_temp: temp=27.7 sd_pos=33145 sysload=0.28 cputime=14.082 memavail=722684 print_time=300.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 299.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18846 bytes_read=55283 bytes_retransmit=9 bytes_invalid=0 send_seq=1406 receive_seq=1406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=60 temp=59.7 pwm=0.561 raspberry_pi: temp=39.3 mcu_temp: temp=27.5 sd_pos=33145 sysload=0.28 cputime=14.160 memavail=723200 print_time=301.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.689
Stats 300.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19335 bytes_read=55894 bytes_retransmit=9 bytes_invalid=0 send_seq=1445 receive_seq=1445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=60 temp=59.7 pwm=0.561 raspberry_pi: temp=38.8 mcu_temp: temp=27.7 sd_pos=33145 sysload=0.28 cputime=14.238 memavail=722948 print_time=302.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 301.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19824 bytes_read=56477 bytes_retransmit=9 bytes_invalid=0 send_seq=1484 receive_seq=1484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=60 temp=59.8 pwm=0.561 raspberry_pi: temp=39.3 mcu_temp: temp=27.7 sd_pos=33145 sysload=0.26 cputime=14.312 memavail=722696 print_time=303.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 302.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20335 bytes_read=57089 bytes_retransmit=9 bytes_invalid=0 send_seq=1523 receive_seq=1523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=59.9 pwm=0.534 raspberry_pi: temp=39.0 mcu_temp: temp=27.7 sd_pos=33145 sysload=0.26 cputime=14.388 memavail=722700 print_time=304.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 303.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20835 bytes_read=57686 bytes_retransmit=9 bytes_invalid=0 send_seq=1562 receive_seq=1562 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=60 temp=59.9 pwm=0.534 raspberry_pi: temp=39.0 mcu_temp: temp=27.8 sd_pos=33145 sysload=0.26 cputime=14.463 memavail=722700 print_time=305.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.662
Stats 304.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000006 bytes_write=21247 bytes_read=58122 bytes_retransmit=9 bytes_invalid=0 send_seq=1582 receive_seq=1582 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=59.9 pwm=0.598 raspberry_pi: temp=39.1 mcu_temp: temp=27.6 sd_pos=33145 sysload=0.26 cputime=14.537 memavail=721956 print_time=306.730 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 305.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000006 bytes_write=21680 bytes_read=58638 bytes_retransmit=9 bytes_invalid=0 send_seq=1614 receive_seq=1614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996888 heater_bed: target=60 temp=60.0 pwm=0.515 raspberry_pi: temp=39.4 mcu_temp: temp=27.8 sd_pos=33145 sysload=0.26 cputime=14.607 memavail=721956 print_time=307.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 306.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000006 bytes_write=22167 bytes_read=59226 bytes_retransmit=9 bytes_invalid=0 send_seq=1653 receive_seq=1653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996885 heater_bed: target=60 temp=60.0 pwm=0.467 raspberry_pi: temp=38.9 mcu_temp: temp=27.7 sd_pos=33145 sysload=0.24 cputime=14.680 memavail=721956 print_time=308.580 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.662
TMC 'extruder' reports GSTAT:      00000001 reset=1(Reset)
TMC 'extruder' reports GSTAT:      00000000
Stats 307.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000006 bytes_write=23659 bytes_read=60204 bytes_retransmit=9 bytes_invalid=0 send_seq=1715 receive_seq=1715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=60 temp=60.1 pwm=0.526 raspberry_pi: temp=38.9 mcu_temp: temp=27.7 sd_pos=33398 sysload=0.24 cputime=14.817 memavail=721960 print_time=317.132 buffer_time=7.720 print_stall=0 extruder: target=200 temp=200.1 pwm=0.606
Stats 308.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000006 bytes_write=23796 bytes_read=60572 bytes_retransmit=9 bytes_invalid=0 send_seq=1726 receive_seq=1726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=60 temp=60.1 pwm=0.526 raspberry_pi: temp=39.3 mcu_temp: temp=27.9 sd_pos=33398 sysload=0.24 cputime=14.876 memavail=722488 print_time=317.132 buffer_time=6.720 print_stall=0 extruder: target=200 temp=200.2 pwm=0.606
Stats 309.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=23949 bytes_read=60945 bytes_retransmit=9 bytes_invalid=0 send_seq=1738 receive_seq=1738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=60 temp=60.2 pwm=0.469 raspberry_pi: temp=38.7 mcu_temp: temp=27.7 sd_pos=33398 sysload=0.24 cputime=14.942 memavail=722524 print_time=317.132 buffer_time=5.720 print_stall=0 extruder: target=200 temp=200.2 pwm=0.606
Stats 310.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=24102 bytes_read=61289 bytes_retransmit=9 bytes_invalid=0 send_seq=1750 receive_seq=1750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=60.2 pwm=0.398 raspberry_pi: temp=39.3 mcu_temp: temp=27.7 sd_pos=33398 sysload=0.24 cputime=15.001 memavail=722536 print_time=317.132 buffer_time=4.720 print_stall=0 extruder: target=200 temp=200.3 pwm=0.606
Stats 311.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=24271 bytes_read=61667 bytes_retransmit=9 bytes_invalid=0 send_seq=1763 receive_seq=1763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=60.2 pwm=0.524 raspberry_pi: temp=38.9 mcu_temp: temp=27.8 sd_pos=33398 sysload=0.30 cputime=15.062 memavail=722552 print_time=317.132 buffer_time=3.719 print_stall=0 extruder: target=200 temp=200.3 pwm=0.642
Stats 312.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=24408 bytes_read=62020 bytes_retransmit=9 bytes_invalid=0 send_seq=1774 receive_seq=1774 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=60.3 pwm=0.524 raspberry_pi: temp=39.0 mcu_temp: temp=27.7 sd_pos=33398 sysload=0.30 cputime=15.120 memavail=722300 print_time=317.132 buffer_time=2.718 print_stall=0 extruder: target=200 temp=200.2 pwm=0.642
Pausing toolhead to calculate extruder phase offset
Stats 313.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=24977 bytes_read=62394 bytes_retransmit=9 bytes_invalid=0 send_seq=1792 receive_seq=1792 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996922 heater_bed: target=60 temp=60.3 pwm=0.450 raspberry_pi: temp=39.1 mcu_temp: temp=27.8 sd_pos=33451 sysload=0.30 cputime=15.188 memavail=722260 print_time=324.357 buffer_time=8.943 print_stall=0 extruder: target=200 temp=200.1 pwm=0.642
Stats 314.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=25130 bytes_read=62782 bytes_retransmit=9 bytes_invalid=0 send_seq=1804 receive_seq=1804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=60 temp=60.3 pwm=0.503 raspberry_pi: temp=39.4 mcu_temp: temp=27.7 sd_pos=33451 sysload=0.30 cputime=15.254 memavail=722344 print_time=324.357 buffer_time=7.942 print_stall=0 extruder: target=200 temp=200.1 pwm=0.642
Stats 315.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=25283 bytes_read=63140 bytes_retransmit=9 bytes_invalid=0 send_seq=1816 receive_seq=1816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=60 temp=60.4 pwm=0.503 raspberry_pi: temp=39.4 mcu_temp: temp=27.9 sd_pos=33451 sysload=0.30 cputime=15.320 memavail=722632 print_time=324.357 buffer_time=6.942 print_stall=0 extruder: target=200 temp=200.0 pwm=0.648
Stats 316.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=25452 bytes_read=63489 bytes_retransmit=9 bytes_invalid=0 send_seq=1829 receive_seq=1829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=60.4 pwm=0.422 raspberry_pi: temp=39.5 mcu_temp: temp=27.8 sd_pos=33451 sysload=0.35 cputime=15.385 memavail=722380 print_time=324.357 buffer_time=5.941 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 317.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=25605 bytes_read=63862 bytes_retransmit=9 bytes_invalid=0 send_seq=1841 receive_seq=1841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=60 temp=60.4 pwm=0.491 raspberry_pi: temp=39.5 mcu_temp: temp=27.8 sd_pos=33451 sysload=0.35 cputime=15.451 memavail=722388 print_time=324.357 buffer_time=4.941 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 318.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=25764 bytes_read=64236 bytes_retransmit=9 bytes_invalid=0 send_seq=1854 receive_seq=1854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=60 temp=60.4 pwm=0.436 raspberry_pi: temp=39.3 mcu_temp: temp=27.7 sd_pos=33451 sysload=0.35 cputime=15.516 memavail=722892 print_time=324.357 buffer_time=3.941 print_stall=0 extruder: target=200 temp=199.7 pwm=0.710
Stats 319.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=25912 bytes_read=64590 bytes_retransmit=9 bytes_invalid=0 send_seq=1865 receive_seq=1865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=60 temp=60.5 pwm=0.436 raspberry_pi: temp=39.8 mcu_temp: temp=27.8 sd_pos=33451 sysload=0.35 cputime=15.580 memavail=722388 print_time=324.357 buffer_time=2.940 print_stall=0 extruder: target=200 temp=199.6 pwm=0.763
Stats 320.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=26049 bytes_read=64958 bytes_retransmit=9 bytes_invalid=0 send_seq=1876 receive_seq=1876 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=60 temp=60.5 pwm=0.436 raspberry_pi: temp=39.3 mcu_temp: temp=27.9 sd_pos=33451 sysload=0.35 cputime=15.646 memavail=722900 print_time=324.357 buffer_time=1.939 print_stall=0 extruder: target=200 temp=199.6 pwm=0.763
Stats 321.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=26239 bytes_read=65311 bytes_retransmit=9 bytes_invalid=0 send_seq=1887 receive_seq=1887 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=60 temp=60.5 pwm=0.414 raspberry_pi: temp=39.5 mcu_temp: temp=28.0 sd_pos=33451 sysload=0.41 cputime=15.708 memavail=722928 print_time=324.358 buffer_time=0.939 print_stall=0 extruder: target=200 temp=199.5 pwm=0.763
Stats 322.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=26433 bytes_read=65683 bytes_retransmit=9 bytes_invalid=0 send_seq=1901 receive_seq=1901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=60 temp=60.5 pwm=0.393 raspberry_pi: temp=39.1 mcu_temp: temp=27.7 sd_pos=33451 sysload=0.41 cputime=15.775 memavail=722928 print_time=324.358 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.763
Stats 323.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=28448 bytes_read=66211 bytes_retransmit=9 bytes_invalid=0 send_seq=1944 receive_seq=1944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=60 temp=60.5 pwm=0.428 raspberry_pi: temp=39.3 mcu_temp: temp=27.9 sd_pos=33838 sysload=0.41 cputime=15.849 memavail=722940 print_time=327.589 buffer_time=2.170 print_stall=0 extruder: target=200 temp=199.5 pwm=0.738
Stats 324.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=29019 bytes_read=66619 bytes_retransmit=9 bytes_invalid=0 send_seq=1963 receive_seq=1963 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=60 temp=60.5 pwm=0.516 raspberry_pi: temp=39.2 mcu_temp: temp=28.0 sd_pos=34223 sysload=0.41 cputime=15.919 memavail=722944 print_time=329.026 buffer_time=2.607 print_stall=0 extruder: target=200 temp=199.4 pwm=0.738
Stats 325.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=29462 bytes_read=66983 bytes_retransmit=9 bytes_invalid=0 send_seq=1979 receive_seq=1979 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996923 heater_bed: target=60 temp=60.5 pwm=0.393 raspberry_pi: temp=39.8 mcu_temp: temp=27.9 sd_pos=34559 sysload=0.41 cputime=15.989 memavail=722196 print_time=329.488 buffer_time=2.067 print_stall=0 extruder: target=200 temp=199.4 pwm=0.738
Stats 326.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=29765 bytes_read=67366 bytes_retransmit=9 bytes_invalid=0 send_seq=1993 receive_seq=1993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=60.5 pwm=0.506 raspberry_pi: temp=39.3 mcu_temp: temp=27.8 sd_pos=34772 sysload=0.45 cputime=16.054 memavail=722196 print_time=330.664 buffer_time=2.244 print_stall=0 extruder: target=200 temp=199.5 pwm=0.738
Stats 327.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=30367 bytes_read=67754 bytes_retransmit=9 bytes_invalid=0 send_seq=2011 receive_seq=2011 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=60 temp=60.5 pwm=0.506 raspberry_pi: temp=40.0 mcu_temp: temp=27.8 sd_pos=35320 sysload=0.45 cputime=16.126 memavail=722196 print_time=332.304 buffer_time=2.883 print_stall=0 extruder: target=200 temp=199.6 pwm=0.713
Stats 328.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=30641 bytes_read=68108 bytes_retransmit=9 bytes_invalid=0 send_seq=2025 receive_seq=2025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=167996909 heater_bed: target=60 temp=60.6 pwm=0.426 raspberry_pi: temp=39.8 mcu_temp: temp=27.9 sd_pos=35533 sysload=0.45 cputime=16.191 memavail=722448 print_time=332.586 buffer_time=2.164 print_stall=0 extruder: target=200 temp=199.7 pwm=0.713
Stats 329.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31096 bytes_read=68506 bytes_retransmit=9 bytes_invalid=0 send_seq=2039 receive_seq=2039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=60.6 pwm=0.426 raspberry_pi: temp=39.4 mcu_temp: temp=28.1 sd_pos=35862 sysload=0.45 cputime=16.258 memavail=723080 print_time=333.943 buffer_time=2.521 print_stall=0 extruder: target=200 temp=199.7 pwm=0.713
Stats 330.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31925 bytes_read=68904 bytes_retransmit=9 bytes_invalid=0 send_seq=2061 receive_seq=2061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=60 temp=60.6 pwm=0.426 raspberry_pi: temp=39.9 mcu_temp: temp=27.9 sd_pos=36221 sysload=0.45 cputime=16.326 memavail=722584 print_time=334.468 buffer_time=2.045 print_stall=0 extruder: target=200 temp=199.9 pwm=0.663
Stats 331.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=32220 bytes_read=69248 bytes_retransmit=9 bytes_invalid=0 send_seq=2075 receive_seq=2075 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=60.6 pwm=0.481 raspberry_pi: temp=39.8 mcu_temp: temp=28.1 sd_pos=36429 sysload=0.50 cputime=16.390 memavail=722584 print_time=335.652 buffer_time=2.229 print_stall=0 extruder: target=200 temp=199.9 pwm=0.663
Stats 332.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=32791 bytes_read=69646 bytes_retransmit=9 bytes_invalid=0 send_seq=2092 receive_seq=2092 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=60 temp=60.6 pwm=0.481 raspberry_pi: temp=39.8 mcu_temp: temp=28.2 sd_pos=36981 sysload=0.50 cputime=16.461 memavail=722840 print_time=337.316 buffer_time=2.892 print_stall=0 extruder: target=200 temp=200.1 pwm=0.663
Stats 333.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=33050 bytes_read=70009 bytes_retransmit=9 bytes_invalid=0 send_seq=2105 receive_seq=2105 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=167996908 heater_bed: target=60 temp=60.5 pwm=0.481 raspberry_pi: temp=39.8 mcu_temp: temp=28.1 sd_pos=37174 sysload=0.50 cputime=16.526 memavail=722124 print_time=337.567 buffer_time=2.142 print_stall=0 extruder: target=200 temp=200.1 pwm=0.663
Stats 334.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=33564 bytes_read=70398 bytes_retransmit=9 bytes_invalid=0 send_seq=2123 receive_seq=2123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=60 temp=60.6 pwm=0.429 raspberry_pi: temp=40.1 mcu_temp: temp=28.1 sd_pos=37537 sysload=0.50 cputime=16.595 memavail=722620 print_time=338.978 buffer_time=2.554 print_stall=0 extruder: target=200 temp=200.2 pwm=0.663
Stats 335.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=34027 bytes_read=70796 bytes_retransmit=9 bytes_invalid=0 send_seq=2140 receive_seq=2140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=60 temp=60.5 pwm=0.495 raspberry_pi: temp=40.1 mcu_temp: temp=28.1 sd_pos=37868 sysload=0.50 cputime=16.662 memavail=722428 print_time=339.456 buffer_time=2.031 print_stall=0 extruder: target=200 temp=200.2 pwm=0.612
Stats 336.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=34328 bytes_read=71159 bytes_retransmit=9 bytes_invalid=0 send_seq=2153 receive_seq=2153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=60 temp=60.5 pwm=0.522 raspberry_pi: temp=40.2 mcu_temp: temp=28.2 sd_pos=38076 sysload=0.46 cputime=16.726 memavail=722680 print_time=340.640 buffer_time=2.214 print_stall=0 extruder: target=200 temp=200.2 pwm=0.612
Stats 337.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=35263 bytes_read=71558 bytes_retransmit=9 bytes_invalid=0 send_seq=2176 receive_seq=2176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=60 temp=60.5 pwm=0.441 raspberry_pi: temp=40.3 mcu_temp: temp=28.2 sd_pos=38613 sysload=0.46 cputime=16.795 memavail=722680 print_time=342.332 buffer_time=2.906 print_stall=0 extruder: target=200 temp=200.2 pwm=0.665
Stats 338.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=35533 bytes_read=71936 bytes_retransmit=9 bytes_invalid=0 send_seq=2189 receive_seq=2189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=167996915 heater_bed: target=60 temp=60.5 pwm=0.607 raspberry_pi: temp=40.1 mcu_temp: temp=28.3 sd_pos=38795 sysload=0.46 cputime=16.858 memavail=722936 print_time=342.589 buffer_time=2.162 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 339.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=36005 bytes_read=72329 bytes_retransmit=9 bytes_invalid=0 send_seq=2205 receive_seq=2205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=60 temp=60.5 pwm=0.485 raspberry_pi: temp=39.9 mcu_temp: temp=28.5 sd_pos=39163 sysload=0.46 cputime=16.926 memavail=722928 print_time=344.014 buffer_time=2.586 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 340.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=36437 bytes_read=72683 bytes_retransmit=9 bytes_invalid=0 send_seq=2219 receive_seq=2219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996920 heater_bed: target=60 temp=60.5 pwm=0.485 raspberry_pi: temp=39.8 mcu_temp: temp=28.3 sd_pos=39529 sysload=0.46 cputime=16.992 memavail=722728 print_time=344.553 buffer_time=2.124 print_stall=0 extruder: target=200 temp=200.0 pwm=0.720
Stats 341.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=36739 bytes_read=73056 bytes_retransmit=9 bytes_invalid=0 send_seq=2231 receive_seq=2231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=60.5 pwm=0.485 raspberry_pi: temp=40.6 mcu_temp: temp=28.5 sd_pos=39710 sysload=0.42 cputime=17.054 memavail=722732 print_time=345.701 buffer_time=2.271 print_stall=0 extruder: target=200 temp=200.0 pwm=0.720
Stats 342.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=37360 bytes_read=73439 bytes_retransmit=9 bytes_invalid=0 send_seq=2248 receive_seq=2248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=60 temp=60.4 pwm=0.512 raspberry_pi: temp=39.4 mcu_temp: temp=28.5 sd_pos=40281 sysload=0.42 cputime=17.124 memavail=722932 print_time=347.430 buffer_time=3.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.720
Stats 343.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=37529 bytes_read=73788 bytes_retransmit=9 bytes_invalid=0 send_seq=2261 receive_seq=2261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=60 temp=60.4 pwm=0.519 raspberry_pi: temp=39.7 mcu_temp: temp=28.3 sd_pos=40281 sysload=0.42 cputime=17.184 memavail=722732 print_time=347.430 buffer_time=1.999 print_stall=0 extruder: target=200 temp=200.0 pwm=0.720
Stats 344.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000057 bytes_write=38634 bytes_read=74251 bytes_retransmit=9 bytes_invalid=0 send_seq=2288 receive_seq=2288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=60 temp=60.4 pwm=0.610 raspberry_pi: temp=39.8 mcu_temp: temp=28.3 sd_pos=40841 sysload=0.42 cputime=17.258 memavail=722256 print_time=349.145 buffer_time=2.714 print_stall=0 extruder: target=200 temp=199.9 pwm=0.720
Stats 345.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000057 bytes_write=39102 bytes_read=74629 bytes_retransmit=9 bytes_invalid=0 send_seq=2304 receive_seq=2304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=60.4 pwm=0.512 raspberry_pi: temp=39.4 mcu_temp: temp=28.5 sd_pos=41214 sysload=0.42 cputime=17.329 memavail=721732 print_time=349.698 buffer_time=2.267 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 346.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000057 bytes_write=39376 bytes_read=74973 bytes_retransmit=9 bytes_invalid=0 send_seq=2316 receive_seq=2316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996913 heater_bed: target=60 temp=60.4 pwm=0.512 raspberry_pi: temp=39.6 mcu_temp: temp=28.6 sd_pos=41406 sysload=0.39 cputime=17.390 memavail=721740 print_time=350.851 buffer_time=2.418 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 347.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000057 bytes_write=39892 bytes_read=75366 bytes_retransmit=9 bytes_invalid=0 send_seq=2332 receive_seq=2332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=60.4 pwm=0.512 raspberry_pi: temp=39.8 mcu_temp: temp=28.5 sd_pos=41974 sysload=0.39 cputime=17.460 memavail=721740 print_time=352.561 buffer_time=3.127 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 348.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000057 bytes_write=40082 bytes_read=75719 bytes_retransmit=9 bytes_invalid=0 send_seq=2343 receive_seq=2343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996915 heater_bed: target=60 temp=60.3 pwm=0.512 raspberry_pi: temp=39.7 mcu_temp: temp=28.6 sd_pos=41974 sysload=0.39 cputime=17.518 memavail=721504 print_time=352.561 buffer_time=2.127 print_stall=0 extruder: target=200 temp=200.1 pwm=0.680
Stats 349.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=40692 bytes_read=76108 bytes_retransmit=9 bytes_invalid=0 send_seq=2361 receive_seq=2361 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=60 temp=60.3 pwm=0.512 raspberry_pi: temp=39.8 mcu_temp: temp=28.7 sd_pos=42533 sysload=0.39 cputime=17.588 memavail=721000 print_time=354.275 buffer_time=2.841 print_stall=0 extruder: target=200 temp=200.1 pwm=0.667
Stats 350.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=41288 bytes_read=76516 bytes_retransmit=9 bytes_invalid=0 send_seq=2380 receive_seq=2380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996908 heater_bed: target=60 temp=60.3 pwm=0.563 raspberry_pi: temp=39.6 mcu_temp: temp=28.6 sd_pos=42754 sysload=0.39 cputime=17.656 memavail=720756 print_time=354.594 buffer_time=2.160 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 351.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=41816 bytes_read=76899 bytes_retransmit=9 bytes_invalid=0 send_seq=2397 receive_seq=2397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=60.3 pwm=0.501 raspberry_pi: temp=39.6 mcu_temp: temp=28.9 sd_pos=43117 sysload=0.36 cputime=17.724 memavail=720252 print_time=356.052 buffer_time=2.618 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 352.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=42233 bytes_read=77263 bytes_retransmit=9 bytes_invalid=0 send_seq=2413 receive_seq=2413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=60.3 pwm=0.515 raspberry_pi: temp=39.8 mcu_temp: temp=28.6 sd_pos=43494 sysload=0.36 cputime=17.791 memavail=720252 print_time=356.623 buffer_time=2.188 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 353.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=42570 bytes_read=77641 bytes_retransmit=9 bytes_invalid=0 send_seq=2426 receive_seq=2426 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=60 temp=60.2 pwm=0.586 raspberry_pi: temp=39.8 mcu_temp: temp=28.8 sd_pos=43684 sysload=0.36 cputime=17.855 memavail=720252 print_time=357.781 buffer_time=2.345 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 354.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=43137 bytes_read=78044 bytes_retransmit=9 bytes_invalid=0 send_seq=2444 receive_seq=2444 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=60.2 pwm=0.491 raspberry_pi: temp=39.1 mcu_temp: temp=28.6 sd_pos=44257 sysload=0.36 cputime=17.930 memavail=719772 print_time=359.515 buffer_time=3.078 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 355.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=43362 bytes_read=78397 bytes_retransmit=9 bytes_invalid=0 send_seq=2458 receive_seq=2458 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=60 temp=60.3 pwm=0.435 raspberry_pi: temp=39.5 mcu_temp: temp=28.8 sd_pos=44257 sysload=0.36 cputime=17.991 memavail=719528 print_time=359.515 buffer_time=2.077 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 356.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=43961 bytes_read=78793 bytes_retransmit=9 bytes_invalid=0 send_seq=2477 receive_seq=2477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996914 heater_bed: target=60 temp=60.2 pwm=0.519 raspberry_pi: temp=39.7 mcu_temp: temp=28.9 sd_pos=44815 sysload=0.33 cputime=18.061 memavail=719660 print_time=361.254 buffer_time=2.816 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 357.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=44517 bytes_read=79176 bytes_retransmit=9 bytes_invalid=0 send_seq=2495 receive_seq=2495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=167996912 heater_bed: target=60 temp=60.2 pwm=0.519 raspberry_pi: temp=39.5 mcu_temp: temp=28.9 sd_pos=45005 sysload=0.33 cputime=18.125 memavail=719408 print_time=361.717 buffer_time=2.278 print_stall=0 extruder: target=200 temp=199.9 pwm=0.726
Stats 358.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=45690 bytes_read=79600 bytes_retransmit=9 bytes_invalid=0 send_seq=2523 receive_seq=2523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=60.2 pwm=0.600 raspberry_pi: temp=39.5 mcu_temp: temp=28.7 sd_pos=45123 sysload=0.33 cputime=18.193 memavail=718664 print_time=362.532 buffer_time=2.093 print_stall=0 extruder: target=200 temp=199.8 pwm=0.726
Stats 359.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=46087 bytes_read=80003 bytes_retransmit=9 bytes_invalid=0 send_seq=2538 receive_seq=2538 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996916 heater_bed: target=60 temp=60.2 pwm=0.479 raspberry_pi: temp=39.3 mcu_temp: temp=29.1 sd_pos=45153 sysload=0.33 cputime=18.256 memavail=718664 print_time=363.459 buffer_time=2.019 print_stall=0 extruder: target=200 temp=199.8 pwm=0.726
Stats 360.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=46704 bytes_read=80391 bytes_retransmit=9 bytes_invalid=0 send_seq=2556 receive_seq=2556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996911 heater_bed: target=60 temp=60.2 pwm=0.532 raspberry_pi: temp=39.5 mcu_temp: temp=29.0 sd_pos=45239 sysload=0.33 cputime=18.323 memavail=718412 print_time=366.204 buffer_time=3.763 print_stall=0 extruder: target=200 temp=199.9 pwm=0.726
Stats 361.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=46908 bytes_read=80740 bytes_retransmit=9 bytes_invalid=0 send_seq=2569 receive_seq=2569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 heater_bed: target=60 temp=60.2 pwm=0.500 raspberry_pi: temp=39.8 mcu_temp: temp=29.0 sd_pos=45239 sysload=0.30 cputime=18.385 memavail=718420 print_time=366.204 buffer_time=2.762 print_stall=0 extruder: target=200 temp=199.9 pwm=0.679
Stats 362.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=47379 bytes_read=81143 bytes_retransmit=9 bytes_invalid=0 send_seq=2587 receive_seq=2587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=60 temp=60.2 pwm=0.554 raspberry_pi: temp=39.6 mcu_temp: temp=29.0 sd_pos=45305 sysload=0.30 cputime=18.449 memavail=718420 print_time=367.195 buffer_time=2.752 print_stall=0 extruder: target=200 temp=199.9 pwm=0.679
Stats 363.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=47676 bytes_read=81506 bytes_retransmit=9 bytes_invalid=0 send_seq=2600 receive_seq=2600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=60 temp=60.2 pwm=0.554 raspberry_pi: temp=39.3 mcu_temp: temp=28.9 sd_pos=45335 sysload=0.30 cputime=18.514 memavail=718420 print_time=368.142 buffer_time=2.699 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 364.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=48170 bytes_read=81895 bytes_retransmit=9 bytes_invalid=0 send_seq=2618 receive_seq=2618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996902 heater_bed: target=60 temp=60.2 pwm=0.429 raspberry_pi: temp=39.9 mcu_temp: temp=29.1 sd_pos=45391 sysload=0.30 cputime=18.578 memavail=718424 print_time=370.030 buffer_time=3.586 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 365.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=48323 bytes_read=82268 bytes_retransmit=9 bytes_invalid=0 send_seq=2630 receive_seq=2630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=60.2 pwm=0.538 raspberry_pi: temp=40.2 mcu_temp: temp=29.1 sd_pos=45391 sysload=0.30 cputime=18.642 memavail=718180 print_time=370.030 buffer_time=2.585 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 366.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=48791 bytes_read=82651 bytes_retransmit=9 bytes_invalid=0 send_seq=2647 receive_seq=2647 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=60.2 pwm=0.492 raspberry_pi: temp=39.9 mcu_temp: temp=29.0 sd_pos=45457 sysload=0.28 cputime=18.707 memavail=718180 print_time=371.050 buffer_time=2.605 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 367.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=49088 bytes_read=83000 bytes_retransmit=9 bytes_invalid=0 send_seq=2660 receive_seq=2660 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=60.2 pwm=0.492 raspberry_pi: temp=39.5 mcu_temp: temp=28.9 sd_pos=45487 sysload=0.28 cputime=18.768 memavail=718308 print_time=372.028 buffer_time=2.582 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 368.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=49584 bytes_read=83403 bytes_retransmit=9 bytes_invalid=0 send_seq=2678 receive_seq=2678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=60 temp=60.2 pwm=0.474 raspberry_pi: temp=39.7 mcu_temp: temp=29.2 sd_pos=45560 sysload=0.28 cputime=18.833 memavail=718056 print_time=373.975 buffer_time=3.529 print_stall=0 extruder: target=200 temp=200.0 pwm=0.703
Stats 369.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=49732 bytes_read=83771 bytes_retransmit=9 bytes_invalid=0 send_seq=2689 receive_seq=2689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996896 heater_bed: target=60 temp=60.1 pwm=0.531 raspberry_pi: temp=40.0 mcu_temp: temp=29.1 sd_pos=45560 sysload=0.28 cputime=18.894 memavail=717804 print_time=373.975 buffer_time=2.528 print_stall=0 extruder: target=200 temp=200.0 pwm=0.703
Stats 370.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=50193 bytes_read=84135 bytes_retransmit=9 bytes_invalid=0 send_seq=2705 receive_seq=2705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=60 temp=60.1 pwm=0.499 raspberry_pi: temp=39.8 mcu_temp: temp=29.2 sd_pos=45626 sysload=0.28 cputime=18.959 memavail=717808 print_time=375.026 buffer_time=2.578 print_stall=0 extruder: target=200 temp=200.0 pwm=0.655
Stats 371.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=50506 bytes_read=84532 bytes_retransmit=9 bytes_invalid=0 send_seq=2719 receive_seq=2719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=60 temp=60.1 pwm=0.445 raspberry_pi: temp=40.1 mcu_temp: temp=29.2 sd_pos=45656 sysload=0.25 cputime=19.024 memavail=717820 print_time=376.034 buffer_time=2.585 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 372.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=51601 bytes_read=84951 bytes_retransmit=9 bytes_invalid=0 send_seq=2746 receive_seq=2746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=60.1 pwm=0.540 raspberry_pi: temp=40.1 mcu_temp: temp=29.3 sd_pos=45777 sysload=0.25 cputime=19.093 memavail=717820 print_time=378.448 buffer_time=3.999 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 373.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=51738 bytes_read=85290 bytes_retransmit=9 bytes_invalid=0 send_seq=2757 receive_seq=2757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 heater_bed: target=60 temp=60.1 pwm=0.540 raspberry_pi: temp=39.7 mcu_temp: temp=29.2 sd_pos=45777 sysload=0.25 cputime=19.153 memavail=717820 print_time=378.448 buffer_time=2.998 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 374.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=52245 bytes_read=85697 bytes_retransmit=9 bytes_invalid=0 send_seq=2774 receive_seq=2770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996886 heater_bed: target=60 temp=60.1 pwm=0.540 raspberry_pi: temp=39.8 mcu_temp: temp=29.2 sd_pos=45833 sysload=0.25 cputime=19.219 memavail=717820 print_time=378.732 buffer_time=2.281 print_stall=0 extruder: target=200 temp=200.2 pwm=0.660
Stats 375.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=52632 bytes_read=86071 bytes_retransmit=9 bytes_invalid=0 send_seq=2788 receive_seq=2788 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=60 temp=60.1 pwm=0.539 raspberry_pi: temp=40.4 mcu_temp: temp=29.2 sd_pos=45863 sysload=0.25 cputime=19.284 memavail=717580 print_time=379.631 buffer_time=2.179 print_stall=0 extruder: target=200 temp=200.1 pwm=0.660
Stats 376.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=52922 bytes_read=86420 bytes_retransmit=9 bytes_invalid=0 send_seq=2801 receive_seq=2801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996893 heater_bed: target=60 temp=60.1 pwm=0.463 raspberry_pi: temp=39.6 mcu_temp: temp=29.3 sd_pos=45893 sysload=0.39 cputime=19.349 memavail=717616 print_time=380.521 buffer_time=2.069 print_stall=0 extruder: target=200 temp=200.1 pwm=0.660
Stats 377.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=54523 bytes_read=86922 bytes_retransmit=9 bytes_invalid=0 send_seq=2836 receive_seq=2836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=60.1 pwm=0.538 raspberry_pi: temp=40.0 mcu_temp: temp=29.4 sd_pos=46215 sysload=0.39 cputime=19.418 memavail=717616 print_time=382.736 buffer_time=3.283 print_stall=0 extruder: target=200 temp=200.1 pwm=0.660
Stats 378.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=54692 bytes_read=87271 bytes_retransmit=9 bytes_invalid=0 send_seq=2849 receive_seq=2849 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=60 temp=60.1 pwm=0.462 raspberry_pi: temp=39.8 mcu_temp: temp=29.5 sd_pos=46215 sysload=0.39 cputime=19.478 memavail=717872 print_time=382.736 buffer_time=2.283 print_stall=0 extruder: target=200 temp=200.1 pwm=0.692
Stats 379.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=55986 bytes_read=87715 bytes_retransmit=9 bytes_invalid=0 send_seq=2878 receive_seq=2878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=60.1 pwm=0.545 raspberry_pi: temp=40.2 mcu_temp: temp=29.2 sd_pos=46476 sysload=0.39 cputime=19.545 memavail=717872 print_time=383.655 buffer_time=2.202 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 380.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=57035 bytes_read=88183 bytes_retransmit=9 bytes_invalid=0 send_seq=2904 receive_seq=2904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996900 heater_bed: target=60 temp=60.1 pwm=0.508 raspberry_pi: temp=39.9 mcu_temp: temp=29.4 sd_pos=46674 sysload=0.39 cputime=19.615 memavail=717872 print_time=384.659 buffer_time=2.205 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 381.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=57755 bytes_read=88555 bytes_retransmit=9 bytes_invalid=0 send_seq=2923 receive_seq=2923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=60 temp=60.1 pwm=0.508 raspberry_pi: temp=39.7 mcu_temp: temp=29.3 sd_pos=46804 sysload=0.36 cputime=19.682 memavail=718424 print_time=385.479 buffer_time=2.025 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 382.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=58747 bytes_read=88949 bytes_retransmit=9 bytes_invalid=0 send_seq=2947 receive_seq=2947 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996894 heater_bed: target=60 temp=60.1 pwm=0.508 raspberry_pi: temp=40.6 mcu_temp: temp=29.5 sd_pos=46998 sysload=0.36 cputime=19.750 memavail=718424 print_time=386.933 buffer_time=2.478 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 383.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=59238 bytes_read=89351 bytes_retransmit=9 bytes_invalid=0 send_seq=2962 receive_seq=2962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996892 heater_bed: target=60 temp=60.1 pwm=0.508 raspberry_pi: temp=40.2 mcu_temp: temp=29.6 sd_pos=47064 sysload=0.36 cputime=19.812 memavail=718184 print_time=387.477 buffer_time=2.022 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 384.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=60037 bytes_read=89760 bytes_retransmit=9 bytes_invalid=0 send_seq=2984 receive_seq=2984 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 heater_bed: target=60 temp=60.1 pwm=0.438 raspberry_pi: temp=40.7 mcu_temp: temp=29.6 sd_pos=47195 sysload=0.36 cputime=19.878 memavail=718968 print_time=388.657 buffer_time=2.201 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 385.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=60847 bytes_read=90154 bytes_retransmit=9 bytes_invalid=0 send_seq=3006 receive_seq=3006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=60 temp=60.1 pwm=0.430 raspberry_pi: temp=40.4 mcu_temp: temp=29.4 sd_pos=47325 sysload=0.36 cputime=19.941 memavail=718468 print_time=389.956 buffer_time=2.500 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 386.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=61355 bytes_read=90571 bytes_retransmit=9 bytes_invalid=0 send_seq=3024 receive_seq=3024 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=60 temp=60.1 pwm=0.531 raspberry_pi: temp=40.2 mcu_temp: temp=29.7 sd_pos=47391 sysload=0.33 cputime=20.005 memavail=718980 print_time=390.651 buffer_time=2.194 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 387.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=62142 bytes_read=90970 bytes_retransmit=9 bytes_invalid=0 send_seq=3047 receive_seq=3047 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996867 heater_bed: target=60 temp=60.1 pwm=0.463 raspberry_pi: temp=40.6 mcu_temp: temp=29.6 sd_pos=47523 sysload=0.33 cputime=20.069 memavail=719084 print_time=392.130 buffer_time=2.673 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 388.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=62612 bytes_read=91349 bytes_retransmit=9 bytes_invalid=0 send_seq=3063 receive_seq=3063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=60.1 pwm=0.466 raspberry_pi: temp=39.8 mcu_temp: temp=29.7 sd_pos=47589 sysload=0.33 cputime=20.130 memavail=719112 print_time=392.915 buffer_time=2.457 print_stall=0 extruder: target=200 temp=200.0 pwm=0.708
Stats 389.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=63241 bytes_read=91771 bytes_retransmit=9 bytes_invalid=0 send_seq=3082 receive_seq=3082 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996872 heater_bed: target=60 temp=60.1 pwm=0.507 raspberry_pi: temp=40.3 mcu_temp: temp=29.6 sd_pos=47662 sysload=0.33 cputime=20.193 memavail=719112 print_time=393.729 buffer_time=2.270 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 390.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=63698 bytes_read=92135 bytes_retransmit=9 bytes_invalid=0 send_seq=3098 receive_seq=3098 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=60.1 pwm=0.507 raspberry_pi: temp=40.2 mcu_temp: temp=29.6 sd_pos=47728 sysload=0.33 cputime=20.253 memavail=718860 print_time=394.574 buffer_time=2.114 print_stall=0 extruder: target=200 temp=200.0 pwm=0.678
Stats 391.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=64476 bytes_read=92544 bytes_retransmit=9 bytes_invalid=0 send_seq=3120 receive_seq=3120 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996872 heater_bed: target=60 temp=60.1 pwm=0.508 raspberry_pi: temp=39.9 mcu_temp: temp=29.8 sd_pos=47857 sysload=0.31 cputime=20.317 memavail=718616 print_time=396.354 buffer_time=2.893 print_stall=0 extruder: target=200 temp=200.0 pwm=0.678
Stats 392.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=64933 bytes_read=92936 bytes_retransmit=9 bytes_invalid=0 send_seq=3136 receive_seq=3136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996874 heater_bed: target=60 temp=60.1 pwm=0.508 raspberry_pi: temp=39.9 mcu_temp: temp=29.7 sd_pos=47922 sysload=0.31 cputime=20.376 memavail=718880 print_time=397.288 buffer_time=2.828 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 393.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=65437 bytes_read=93305 bytes_retransmit=9 bytes_invalid=0 send_seq=3153 receive_seq=3153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=60 temp=60.1 pwm=0.402 raspberry_pi: temp=40.3 mcu_temp: temp=29.8 sd_pos=47988 sysload=0.31 cputime=20.436 memavail=719104 print_time=398.253 buffer_time=2.792 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 394.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000058 bytes_write=65921 bytes_read=93699 bytes_retransmit=9 bytes_invalid=0 send_seq=3169 receive_seq=3169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 heater_bed: target=60 temp=60.1 pwm=0.558 raspberry_pi: temp=40.6 mcu_temp: temp=30.0 sd_pos=48054 sysload=0.31 cputime=20.497 memavail=719132 print_time=399.248 buffer_time=2.786 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 395.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000058 bytes_write=66404 bytes_read=94096 bytes_retransmit=9 bytes_invalid=0 send_seq=3186 receive_seq=3186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=60 temp=60.1 pwm=0.440 raspberry_pi: temp=40.1 mcu_temp: temp=29.8 sd_pos=48120 sysload=0.31 cputime=20.559 memavail=719136 print_time=400.272 buffer_time=2.811 print_stall=0 extruder: target=200 temp=200.0 pwm=0.709
Stats 396.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000058 bytes_write=66922 bytes_read=94465 bytes_retransmit=9 bytes_invalid=0 send_seq=3203 receive_seq=3203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=60 temp=60.1 pwm=0.525 raspberry_pi: temp=40.3 mcu_temp: temp=29.8 sd_pos=48186 sysload=0.28 cputime=20.623 memavail=719388 print_time=401.327 buffer_time=2.865 print_stall=0 extruder: target=200 temp=200.0 pwm=0.709
Stats 397.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000058 bytes_write=67428 bytes_read=94844 bytes_retransmit=9 bytes_invalid=0 send_seq=3219 receive_seq=3219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=60 temp=60.1 pwm=0.494 raspberry_pi: temp=40.1 mcu_temp: temp=29.6 sd_pos=48251 sysload=0.28 cputime=20.684 memavail=719408 print_time=402.412 buffer_time=2.949 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 398.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000014 mcu_task_stddev=0.000058 bytes_write=67861 bytes_read=95236 bytes_retransmit=9 bytes_invalid=0 send_seq=3235 receive_seq=3235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996883 heater_bed: target=60 temp=60.1 pwm=0.494 raspberry_pi: temp=40.6 mcu_temp: temp=29.9 sd_pos=48317 sysload=0.28 cputime=20.745 memavail=719408 print_time=403.526 buffer_time=3.063 print_stall=0 extruder: target=200 temp=199.8 pwm=0.709
Stats 399.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=68054 bytes_read=95595 bytes_retransmit=9 bytes_invalid=0 send_seq=3247 receive_seq=3247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=60.1 pwm=0.494 raspberry_pi: temp=40.2 mcu_temp: temp=29.8 sd_pos=48317 sysload=0.28 cputime=20.804 memavail=719680 print_time=403.526 buffer_time=2.063 print_stall=0 extruder: target=200 temp=199.9 pwm=0.723
Stats 400.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=68530 bytes_read=95969 bytes_retransmit=9 bytes_invalid=0 send_seq=3262 receive_seq=3262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=60.1 pwm=0.494 raspberry_pi: temp=40.5 mcu_temp: temp=29.8 sd_pos=48383 sysload=0.28 cputime=20.864 memavail=720132 print_time=404.671 buffer_time=2.206 print_stall=0 extruder: target=200 temp=199.9 pwm=0.723
Stats 401.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=69036 bytes_read=96366 bytes_retransmit=9 bytes_invalid=0 send_seq=3279 receive_seq=3279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=60 temp=60.1 pwm=0.337 raspberry_pi: temp=40.1 mcu_temp: temp=29.9 sd_pos=48449 sysload=0.26 cputime=20.927 memavail=719960 print_time=405.846 buffer_time=2.381 print_stall=0 extruder: target=200 temp=199.9 pwm=0.723
Stats 402.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=69554 bytes_read=96745 bytes_retransmit=9 bytes_invalid=0 send_seq=3298 receive_seq=3298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=60.1 pwm=0.606 raspberry_pi: temp=40.6 mcu_temp: temp=30.0 sd_pos=48515 sysload=0.26 cputime=20.988 memavail=719960 print_time=407.050 buffer_time=2.585 print_stall=0 extruder: target=200 temp=199.9 pwm=0.723
Stats 403.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=70088 bytes_read=97134 bytes_retransmit=9 bytes_invalid=0 send_seq=3316 receive_seq=3316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=60.0 pwm=0.624 raspberry_pi: temp=40.2 mcu_temp: temp=30.0 sd_pos=48581 sysload=0.26 cputime=21.053 memavail=720160 print_time=408.285 buffer_time=2.819 print_stall=0 extruder: target=200 temp=199.9 pwm=0.713
Stats 404.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=70612 bytes_read=97551 bytes_retransmit=9 bytes_invalid=0 send_seq=3334 receive_seq=3334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=60 temp=60.1 pwm=0.341 raspberry_pi: temp=40.8 mcu_temp: temp=30.0 sd_pos=48646 sysload=0.26 cputime=21.120 memavail=720496 print_time=409.561 buffer_time=3.094 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 405.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=70765 bytes_read=97895 bytes_retransmit=9 bytes_invalid=0 send_seq=3346 receive_seq=3346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=60 temp=60.1 pwm=0.466 raspberry_pi: temp=40.8 mcu_temp: temp=30.1 sd_pos=48646 sysload=0.26 cputime=21.178 memavail=720444 print_time=409.561 buffer_time=2.093 print_stall=0 extruder: target=200 temp=200.1 pwm=0.662
Stats 406.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=71237 bytes_read=98278 bytes_retransmit=9 bytes_invalid=0 send_seq=3363 receive_seq=3363 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996880 heater_bed: target=60 temp=60.0 pwm=0.616 raspberry_pi: temp=40.6 mcu_temp: temp=30.0 sd_pos=48712 sysload=0.24 cputime=21.241 memavail=720256 print_time=410.796 buffer_time=2.328 print_stall=0 extruder: target=200 temp=200.2 pwm=0.662
Stats 407.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=71762 bytes_read=98667 bytes_retransmit=9 bytes_invalid=0 send_seq=3381 receive_seq=3381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=60 temp=60.1 pwm=0.519 raspberry_pi: temp=41.1 mcu_temp: temp=30.0 sd_pos=48776 sysload=0.24 cputime=21.304 memavail=720016 print_time=412.000 buffer_time=2.532 print_stall=0 extruder: target=200 temp=200.2 pwm=0.662
Stats 408.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=72271 bytes_read=99032 bytes_retransmit=9 bytes_invalid=0 send_seq=3398 receive_seq=3398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996886 heater_bed: target=60 temp=60.1 pwm=0.541 raspberry_pi: temp=41.5 mcu_temp: temp=30.0 sd_pos=48842 sysload=0.24 cputime=21.367 memavail=720016 print_time=413.175 buffer_time=2.706 print_stall=0 extruder: target=200 temp=200.3 pwm=0.661
Stats 409.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=72761 bytes_read=99426 bytes_retransmit=9 bytes_invalid=0 send_seq=3414 receive_seq=3414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=60.1 pwm=0.511 raspberry_pi: temp=40.6 mcu_temp: temp=30.4 sd_pos=48906 sysload=0.24 cputime=21.428 memavail=720016 print_time=414.320 buffer_time=2.850 print_stall=0 extruder: target=200 temp=200.3 pwm=0.661
Stats 410.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=73300 bytes_read=99833 bytes_retransmit=9 bytes_invalid=0 send_seq=3433 receive_seq=3433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=60.1 pwm=0.490 raspberry_pi: temp=41.0 mcu_temp: temp=30.1 sd_pos=48972 sysload=0.24 cputime=21.492 memavail=720276 print_time=415.434 buffer_time=2.963 print_stall=0 extruder: target=200 temp=200.3 pwm=0.661
Stats 411.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=73763 bytes_read=100197 bytes_retransmit=9 bytes_invalid=0 send_seq=3449 receive_seq=3449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=60.1 pwm=0.566 raspberry_pi: temp=40.9 mcu_temp: temp=30.2 sd_pos=49036 sysload=0.22 cputime=21.556 memavail=719520 print_time=416.519 buffer_time=3.048 print_stall=0 extruder: target=200 temp=200.2 pwm=0.661
Stats 412.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=73984 bytes_read=100556 bytes_retransmit=9 bytes_invalid=0 send_seq=3461 receive_seq=3461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996881 heater_bed: target=60 temp=60.1 pwm=0.391 raspberry_pi: temp=41.1 mcu_temp: temp=30.4 sd_pos=49036 sysload=0.22 cputime=21.621 memavail=719276 print_time=416.519 buffer_time=2.048 print_stall=0 extruder: target=200 temp=200.2 pwm=0.669
Stats 413.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=74501 bytes_read=100958 bytes_retransmit=9 bytes_invalid=0 send_seq=3479 receive_seq=3479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996881 heater_bed: target=60 temp=60.1 pwm=0.545 raspberry_pi: temp=40.7 mcu_temp: temp=30.1 sd_pos=49102 sysload=0.22 cputime=21.683 memavail=719060 print_time=417.573 buffer_time=2.101 print_stall=0 extruder: target=200 temp=200.2 pwm=0.669
Stats 414.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=75020 bytes_read=101357 bytes_retransmit=9 bytes_invalid=0 send_seq=3499 receive_seq=3499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996880 heater_bed: target=60 temp=60.1 pwm=0.536 raspberry_pi: temp=40.7 mcu_temp: temp=30.2 sd_pos=49166 sysload=0.22 cputime=21.749 memavail=719532 print_time=418.598 buffer_time=2.126 print_stall=0 extruder: target=200 temp=200.1 pwm=0.669
Stats 415.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=75497 bytes_read=101736 bytes_retransmit=9 bytes_invalid=0 send_seq=3515 receive_seq=3515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=60 temp=60.1 pwm=0.538 raspberry_pi: temp=41.0 mcu_temp: temp=30.5 sd_pos=49231 sysload=0.22 cputime=21.815 memavail=719576 print_time=419.593 buffer_time=2.120 print_stall=0 extruder: target=200 temp=200.1 pwm=0.669
Stats 416.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=76012 bytes_read=102138 bytes_retransmit=9 bytes_invalid=0 send_seq=3533 receive_seq=3533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=60 temp=60.1 pwm=0.484 raspberry_pi: temp=40.8 mcu_temp: temp=30.2 sd_pos=49295 sysload=0.20 cputime=21.881 memavail=719272 print_time=420.557 buffer_time=2.084 print_stall=0 extruder: target=200 temp=200.0 pwm=0.725
Stats 417.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=76491 bytes_read=102507 bytes_retransmit=9 bytes_invalid=0 send_seq=3550 receive_seq=3550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996878 heater_bed: target=60 temp=60.1 pwm=0.376 raspberry_pi: temp=39.9 mcu_temp: temp=30.2 sd_pos=49361 sysload=0.20 cputime=21.942 memavail=720800 print_time=421.492 buffer_time=2.018 print_stall=0 extruder: target=200 temp=199.9 pwm=0.725
Stats 418.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=77280 bytes_read=102911 bytes_retransmit=9 bytes_invalid=0 send_seq=3571 receive_seq=3571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996880 heater_bed: target=60 temp=60.1 pwm=0.459 raspberry_pi: temp=40.7 mcu_temp: temp=30.3 sd_pos=49490 sysload=0.20 cputime=22.006 memavail=720856 print_time=423.271 buffer_time=2.796 print_stall=0 extruder: target=200 temp=199.9 pwm=0.725
Stats 419.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=77784 bytes_read=103323 bytes_retransmit=9 bytes_invalid=0 send_seq=3588 receive_seq=3588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=60.1 pwm=0.518 raspberry_pi: temp=40.2 mcu_temp: temp=30.4 sd_pos=49554 sysload=0.20 cputime=22.069 memavail=720584 print_time=424.116 buffer_time=2.640 print_stall=0 extruder: target=200 temp=199.8 pwm=0.725
Stats 420.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=78264 bytes_read=103692 bytes_retransmit=9 bytes_invalid=0 send_seq=3605 receive_seq=3605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=60.1 pwm=0.455 raspberry_pi: temp=39.9 mcu_temp: temp=30.5 sd_pos=49620 sysload=0.20 cputime=22.129 memavail=720648 print_time=424.930 buffer_time=2.455 print_stall=0 extruder: target=200 temp=199.8 pwm=0.716
Stats 421.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=78749 bytes_read=104076 bytes_retransmit=9 bytes_invalid=0 send_seq=3622 receive_seq=3622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996888 heater_bed: target=60 temp=60.1 pwm=0.510 raspberry_pi: temp=40.2 mcu_temp: temp=30.5 sd_pos=49684 sysload=0.18 cputime=22.189 memavail=721100 print_time=425.715 buffer_time=2.239 print_stall=0 extruder: target=200 temp=199.8 pwm=0.716
Stats 422.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=79531 bytes_read=104493 bytes_retransmit=9 bytes_invalid=0 send_seq=3643 receive_seq=3643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996886 heater_bed: target=60 temp=60.1 pwm=0.471 raspberry_pi: temp=40.2 mcu_temp: temp=30.5 sd_pos=49814 sysload=0.18 cputime=22.255 memavail=721120 print_time=427.194 buffer_time=2.717 print_stall=0 extruder: target=200 temp=199.8 pwm=0.716
Stats 423.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=80035 bytes_read=104872 bytes_retransmit=9 bytes_invalid=0 send_seq=3662 receive_seq=3662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996883 heater_bed: target=60 temp=60.1 pwm=0.455 raspberry_pi: temp=40.6 mcu_temp: temp=30.4 sd_pos=49880 sysload=0.18 cputime=22.318 memavail=720880 print_time=427.889 buffer_time=2.411 print_stall=0 extruder: target=200 temp=199.9 pwm=0.716
Stats 424.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=80506 bytes_read=105271 bytes_retransmit=9 bytes_invalid=0 send_seq=3679 receive_seq=3679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996881 heater_bed: target=60 temp=60.1 pwm=0.455 raspberry_pi: temp=40.2 mcu_temp: temp=30.4 sd_pos=49944 sysload=0.18 cputime=22.382 memavail=720640 print_time=428.553 buffer_time=2.075 print_stall=0 extruder: target=200 temp=199.9 pwm=0.658
Stats 425.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=81323 bytes_read=105693 bytes_retransmit=9 bytes_invalid=0 send_seq=3701 receive_seq=3701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996877 heater_bed: target=60 temp=60.1 pwm=0.434 raspberry_pi: temp=39.8 mcu_temp: temp=30.5 sd_pos=50071 sysload=0.18 cputime=22.447 memavail=720452 print_time=429.793 buffer_time=2.314 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 426.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=82140 bytes_read=106092 bytes_retransmit=9 bytes_invalid=0 send_seq=3724 receive_seq=3724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996925 heater_bed: target=60 temp=60.1 pwm=0.374 raspberry_pi: temp=40.4 mcu_temp: temp=30.4 sd_pos=50199 sysload=0.17 cputime=22.513 memavail=720424 print_time=430.912 buffer_time=2.433 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 427.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=82914 bytes_read=106496 bytes_retransmit=9 bytes_invalid=0 send_seq=3745 receive_seq=3745 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996921 heater_bed: target=60 temp=60.1 pwm=0.510 raspberry_pi: temp=40.0 mcu_temp: temp=30.5 sd_pos=50325 sysload=0.17 cputime=22.579 memavail=720012 print_time=431.911 buffer_time=2.432 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 428.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=83706 bytes_read=106918 bytes_retransmit=9 bytes_invalid=0 send_seq=3767 receive_seq=3767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=60 temp=60.1 pwm=0.394 raspberry_pi: temp=40.1 mcu_temp: temp=30.7 sd_pos=50454 sysload=0.17 cputime=22.646 memavail=720024 print_time=432.790 buffer_time=2.310 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 429.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=84477 bytes_read=107322 bytes_retransmit=9 bytes_invalid=0 send_seq=3788 receive_seq=3788 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=60 temp=60.1 pwm=0.427 raspberry_pi: temp=40.3 mcu_temp: temp=30.5 sd_pos=50584 sysload=0.17 cputime=22.713 memavail=720296 print_time=433.550 buffer_time=2.068 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 430.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=86079 bytes_read=107791 bytes_retransmit=9 bytes_invalid=0 send_seq=3822 receive_seq=3822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=167996925 heater_bed: target=60 temp=60.1 pwm=0.376 raspberry_pi: temp=40.1 mcu_temp: temp=30.6 sd_pos=50908 sysload=0.17 cputime=22.782 memavail=720004 print_time=434.923 buffer_time=2.441 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 431.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=87501 bytes_read=108263 bytes_retransmit=9 bytes_invalid=0 send_seq=3854 receive_seq=3854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=60 temp=60.1 pwm=0.484 raspberry_pi: temp=40.1 mcu_temp: temp=30.6 sd_pos=51204 sysload=0.16 cputime=22.849 memavail=720064 print_time=435.522 buffer_time=2.040 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 432.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=89207 bytes_read=108726 bytes_retransmit=9 bytes_invalid=0 send_seq=3891 receive_seq=3891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=167996917 heater_bed: target=60 temp=60.1 pwm=0.580 raspberry_pi: temp=39.9 mcu_temp: temp=30.9 sd_pos=51482 sysload=0.16 cputime=22.929 memavail=720284 print_time=436.482 buffer_time=1.999 print_stall=0 extruder: target=200 temp=199.9 pwm=0.713
Stats 433.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=89898 bytes_read=109109 bytes_retransmit=9 bytes_invalid=0 send_seq=3910 receive_seq=3910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=10 freq=167996915 heater_bed: target=60 temp=60.1 pwm=0.514 raspberry_pi: temp=40.0 mcu_temp: temp=30.6 sd_pos=51542 sysload=0.16 cputime=22.998 memavail=720588 print_time=437.617 buffer_time=2.133 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 434.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=90586 bytes_read=109534 bytes_retransmit=9 bytes_invalid=0 send_seq=3930 receive_seq=3930 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996971 heater_bed: target=60 temp=60.1 pwm=0.478 raspberry_pi: temp=40.7 mcu_temp: temp=30.6 sd_pos=51598 sysload=0.16 cputime=23.069 memavail=721092 print_time=438.734 buffer_time=2.249 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 435.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=91414 bytes_read=109933 bytes_retransmit=9 bytes_invalid=0 send_seq=3953 receive_seq=3953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996961 heater_bed: target=60 temp=60.1 pwm=0.439 raspberry_pi: temp=40.2 mcu_temp: temp=30.8 sd_pos=51694 sysload=0.16 cputime=23.138 memavail=721284 print_time=439.937 buffer_time=2.452 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 436.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=92055 bytes_read=110327 bytes_retransmit=9 bytes_invalid=0 send_seq=3972 receive_seq=3972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996953 heater_bed: target=60 temp=60.1 pwm=0.516 raspberry_pi: temp=40.7 mcu_temp: temp=30.6 sd_pos=51750 sysload=0.22 cputime=23.204 memavail=721284 print_time=441.088 buffer_time=2.602 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 437.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=92650 bytes_read=110729 bytes_retransmit=9 bytes_invalid=0 send_seq=3990 receive_seq=3990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996949 heater_bed: target=60 temp=60.1 pwm=0.423 raspberry_pi: temp=40.3 mcu_temp: temp=30.7 sd_pos=51816 sysload=0.22 cputime=23.276 memavail=721060 print_time=441.728 buffer_time=2.243 print_stall=0 extruder: target=200 temp=200.0 pwm=0.694
Stats 438.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=93578 bytes_read=111133 bytes_retransmit=9 bytes_invalid=0 send_seq=4014 receive_seq=4014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996941 heater_bed: target=60 temp=60.1 pwm=0.456 raspberry_pi: temp=40.2 mcu_temp: temp=30.7 sd_pos=51920 sysload=0.22 cputime=23.346 memavail=720808 print_time=443.510 buffer_time=3.024 print_stall=0 extruder: target=200 temp=200.1 pwm=0.632
Stats 439.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=93740 bytes_read=111507 bytes_retransmit=9 bytes_invalid=0 send_seq=4026 receive_seq=4026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996935 heater_bed: target=60 temp=60.1 pwm=0.437 raspberry_pi: temp=40.5 mcu_temp: temp=30.8 sd_pos=51920 sysload=0.22 cputime=23.411 memavail=720768 print_time=443.510 buffer_time=2.024 print_stall=0 extruder: target=200 temp=200.1 pwm=0.632
Stats 440.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=94435 bytes_read=111919 bytes_retransmit=9 bytes_invalid=0 send_seq=4046 receive_seq=4046 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996931 heater_bed: target=60 temp=60.2 pwm=0.370 raspberry_pi: temp=40.2 mcu_temp: temp=30.8 sd_pos=52015 sysload=0.22 cputime=23.478 memavail=720596 print_time=445.359 buffer_time=2.872 print_stall=0 extruder: target=200 temp=200.2 pwm=0.632
Stats 441.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=95616 bytes_read=112348 bytes_retransmit=9 bytes_invalid=0 send_seq=4075 receive_seq=4075 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996924 heater_bed: target=60 temp=60.1 pwm=0.439 raspberry_pi: temp=40.5 mcu_temp: temp=30.8 sd_pos=52136 sysload=0.29 cputime=23.547 memavail=721076 print_time=447.564 buffer_time=4.076 print_stall=0 extruder: target=200 temp=200.2 pwm=0.632
Stats 442.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=95768 bytes_read=112718 bytes_retransmit=9 bytes_invalid=0 send_seq=4087 receive_seq=4087 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996923 heater_bed: target=60 temp=60.1 pwm=0.439 raspberry_pi: temp=40.5 mcu_temp: temp=30.8 sd_pos=52136 sysload=0.29 cputime=23.613 memavail=720128 print_time=447.564 buffer_time=3.075 print_stall=0 extruder: target=200 temp=200.2 pwm=0.632
Stats 443.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=95930 bytes_read=113090 bytes_retransmit=9 bytes_invalid=0 send_seq=4099 receive_seq=4099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=60.1 pwm=0.439 raspberry_pi: temp=40.3 mcu_temp: temp=30.8 sd_pos=52136 sysload=0.29 cputime=23.676 memavail=720128 print_time=447.564 buffer_time=2.075 print_stall=0 extruder: target=200 temp=200.1 pwm=0.685
Stats 444.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=96672 bytes_read=113489 bytes_retransmit=9 bytes_invalid=0 send_seq=4119 receive_seq=4119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=60 temp=60.1 pwm=0.439 raspberry_pi: temp=40.2 mcu_temp: temp=30.8 sd_pos=52222 sysload=0.29 cputime=23.746 memavail=721188 print_time=448.656 buffer_time=2.166 print_stall=0 extruder: target=200 temp=200.1 pwm=0.685
Stats 445.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=97593 bytes_read=113908 bytes_retransmit=9 bytes_invalid=0 send_seq=4143 receive_seq=4143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996905 heater_bed: target=60 temp=60.1 pwm=0.410 raspberry_pi: temp=39.9 mcu_temp: temp=30.8 sd_pos=52316 sysload=0.29 cputime=23.817 memavail=721192 print_time=451.272 buffer_time=3.781 print_stall=0 extruder: target=200 temp=200.0 pwm=0.685
Stats 446.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=97785 bytes_read=114280 bytes_retransmit=9 bytes_invalid=0 send_seq=4155 receive_seq=4155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=60.1 pwm=0.393 raspberry_pi: temp=40.1 mcu_temp: temp=31.0 sd_pos=52316 sysload=0.34 cputime=23.883 memavail=721012 print_time=451.272 buffer_time=2.780 print_stall=0 extruder: target=200 temp=200.0 pwm=0.685
Stats 447.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=99129 bytes_read=114719 bytes_retransmit=9 bytes_invalid=0 send_seq=4186 receive_seq=4186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996901 heater_bed: target=60 temp=60.1 pwm=0.430 raspberry_pi: temp=40.0 mcu_temp: temp=30.8 sd_pos=52510 sysload=0.34 cputime=23.953 memavail=720780 print_time=452.115 buffer_time=2.622 print_stall=0 extruder: target=200 temp=199.9 pwm=0.733
Stats 448.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=100337 bytes_read=115158 bytes_retransmit=9 bytes_invalid=0 send_seq=4214 receive_seq=4214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996903 heater_bed: target=60 temp=60.1 pwm=0.497 raspberry_pi: temp=40.3 mcu_temp: temp=30.8 sd_pos=52705 sysload=0.34 cputime=24.020 memavail=720572 print_time=452.568 buffer_time=2.074 print_stall=0 extruder: target=200 temp=199.9 pwm=0.733
Stats 449.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=101831 bytes_read=115645 bytes_retransmit=9 bytes_invalid=0 send_seq=4246 receive_seq=4246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=60 temp=60.1 pwm=0.418 raspberry_pi: temp=40.4 mcu_temp: temp=30.7 sd_pos=52964 sysload=0.34 cputime=24.090 memavail=720576 print_time=453.545 buffer_time=2.050 print_stall=0 extruder: target=200 temp=199.9 pwm=0.733
Stats 450.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=102975 bytes_read=116069 bytes_retransmit=9 bytes_invalid=0 send_seq=4274 receive_seq=4274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=60 temp=60.1 pwm=0.423 raspberry_pi: temp=40.8 mcu_temp: temp=30.9 sd_pos=53156 sysload=0.34 cputime=24.162 memavail=720524 print_time=454.557 buffer_time=2.062 print_stall=0 extruder: target=200 temp=199.9 pwm=0.672
Stats 451.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=104242 bytes_read=116508 bytes_retransmit=9 bytes_invalid=0 send_seq=4302 receive_seq=4302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 heater_bed: target=60 temp=60.1 pwm=0.423 raspberry_pi: temp=40.6 mcu_temp: temp=31.0 sd_pos=53360 sysload=0.48 cputime=24.236 memavail=720584 print_time=455.810 buffer_time=2.315 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 452.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=105064 bytes_read=116930 bytes_retransmit=9 bytes_invalid=0 send_seq=4324 receive_seq=4324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996891 heater_bed: target=60 temp=60.1 pwm=0.393 raspberry_pi: temp=40.3 mcu_temp: temp=30.9 sd_pos=53488 sysload=0.48 cputime=24.304 memavail=720228 print_time=456.778 buffer_time=2.283 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 453.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=105921 bytes_read=117329 bytes_retransmit=9 bytes_invalid=0 send_seq=4347 receive_seq=4347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996890 heater_bed: target=60 temp=60.1 pwm=0.447 raspberry_pi: temp=40.9 mcu_temp: temp=31.0 sd_pos=53617 sysload=0.48 cputime=24.371 memavail=720440 print_time=457.854 buffer_time=2.358 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 454.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000059 bytes_write=106795 bytes_read=117758 bytes_retransmit=9 bytes_invalid=0 send_seq=4370 receive_seq=4370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996885 heater_bed: target=60 temp=60.1 pwm=0.442 raspberry_pi: temp=40.5 mcu_temp: temp=31.1 sd_pos=53746 sysload=0.48 cputime=24.439 memavail=721180 print_time=459.035 buffer_time=2.539 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 455.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000059 bytes_write=107295 bytes_read=118155 bytes_retransmit=9 bytes_invalid=0 send_seq=4387 receive_seq=4387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996881 heater_bed: target=60 temp=60.1 pwm=0.442 raspberry_pi: temp=41.3 mcu_temp: temp=31.0 sd_pos=53810 sysload=0.48 cputime=24.509 memavail=720720 print_time=459.666 buffer_time=2.170 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 456.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000059 bytes_write=108149 bytes_read=118549 bytes_retransmit=9 bytes_invalid=0 send_seq=4409 receive_seq=4409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=60 temp=60.1 pwm=0.370 raspberry_pi: temp=40.3 mcu_temp: temp=31.0 sd_pos=53939 sysload=0.44 cputime=24.576 memavail=720672 print_time=461.008 buffer_time=2.511 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 457.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000059 bytes_write=108663 bytes_read=118933 bytes_retransmit=9 bytes_invalid=0 send_seq=4426 receive_seq=4426 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996873 heater_bed: target=60 temp=60.1 pwm=0.402 raspberry_pi: temp=40.4 mcu_temp: temp=30.8 sd_pos=54005 sysload=0.44 cputime=24.645 memavail=720740 print_time=461.719 buffer_time=2.221 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 458.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000059 bytes_write=109494 bytes_read=119348 bytes_retransmit=9 bytes_invalid=0 send_seq=4449 receive_seq=4449 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996870 heater_bed: target=60 temp=60.1 pwm=0.453 raspberry_pi: temp=40.9 mcu_temp: temp=31.0 sd_pos=54135 sysload=0.44 cputime=24.715 memavail=721140 print_time=463.221 buffer_time=2.723 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 459.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=110045 bytes_read=119725 bytes_retransmit=9 bytes_invalid=0 send_seq=4466 receive_seq=4466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996869 heater_bed: target=60 temp=60.1 pwm=0.383 raspberry_pi: temp=40.6 mcu_temp: temp=31.4 sd_pos=54199 sysload=0.44 cputime=24.784 memavail=721728 print_time=464.012 buffer_time=2.513 print_stall=0 extruder: target=200 temp=200.0 pwm=0.702
Stats 460.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=110552 bytes_read=120109 bytes_retransmit=9 bytes_invalid=0 send_seq=4483 receive_seq=4483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996868 heater_bed: target=60 temp=60.1 pwm=0.463 raspberry_pi: temp=40.9 mcu_temp: temp=31.2 sd_pos=54265 sysload=0.44 cputime=24.851 memavail=721532 print_time=464.829 buffer_time=2.329 print_stall=0 extruder: target=200 temp=200.0 pwm=0.702
Stats 461.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=111035 bytes_read=120501 bytes_retransmit=9 bytes_invalid=0 send_seq=4499 receive_seq=4499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996863 heater_bed: target=60 temp=60.1 pwm=0.463 raspberry_pi: temp=40.9 mcu_temp: temp=31.3 sd_pos=54329 sysload=0.40 cputime=24.916 memavail=721532 print_time=465.673 buffer_time=2.173 print_stall=0 extruder: target=200 temp=200.0 pwm=0.702
Stats 462.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=111540 bytes_read=120870 bytes_retransmit=9 bytes_invalid=0 send_seq=4516 receive_seq=4516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=60 temp=60.1 pwm=0.384 raspberry_pi: temp=40.8 mcu_temp: temp=31.3 sd_pos=54394 sysload=0.40 cputime=24.983 memavail=721040 print_time=466.544 buffer_time=2.043 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 463.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=112445 bytes_read=121284 bytes_retransmit=9 bytes_invalid=0 send_seq=4539 receive_seq=4539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=60 temp=60.1 pwm=0.382 raspberry_pi: temp=40.7 mcu_temp: temp=31.3 sd_pos=54524 sysload=0.40 cputime=25.055 memavail=720804 print_time=468.366 buffer_time=2.864 print_stall=0 extruder: target=200 temp=199.9 pwm=0.714
Stats 464.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=112956 bytes_read=121691 bytes_retransmit=9 bytes_invalid=0 send_seq=4555 receive_seq=4555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 heater_bed: target=60 temp=60.1 pwm=0.386 raspberry_pi: temp=41.0 mcu_temp: temp=31.3 sd_pos=54588 sysload=0.40 cputime=25.122 memavail=720764 print_time=469.317 buffer_time=2.815 print_stall=0 extruder: target=200 temp=199.8 pwm=0.714
Stats 465.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=113464 bytes_read=122055 bytes_retransmit=9 bytes_invalid=0 send_seq=4571 receive_seq=4571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996853 heater_bed: target=60 temp=60.1 pwm=0.477 raspberry_pi: temp=40.8 mcu_temp: temp=31.2 sd_pos=54654 sysload=0.40 cputime=25.187 memavail=720812 print_time=470.295 buffer_time=2.792 print_stall=0 extruder: target=200 temp=199.9 pwm=0.714
Stats 466.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=113964 bytes_read=122434 bytes_retransmit=9 bytes_invalid=0 send_seq=4587 receive_seq=4587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=60 temp=60.1 pwm=0.420 raspberry_pi: temp=41.0 mcu_temp: temp=31.4 sd_pos=54717 sysload=0.37 cputime=25.255 memavail=720812 print_time=471.299 buffer_time=2.795 print_stall=0 extruder: target=200 temp=199.9 pwm=0.714
Stats 467.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=114477 bytes_read=122831 bytes_retransmit=9 bytes_invalid=0 send_seq=4604 receive_seq=4604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996847 heater_bed: target=60 temp=60.1 pwm=0.420 raspberry_pi: temp=40.8 mcu_temp: temp=31.4 sd_pos=54781 sysload=0.37 cputime=25.321 memavail=721068 print_time=472.330 buffer_time=2.826 print_stall=0 extruder: target=200 temp=199.9 pwm=0.704
Stats 468.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=115041 bytes_read=123205 bytes_retransmit=9 bytes_invalid=0 send_seq=4622 receive_seq=4622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996846 heater_bed: target=60 temp=60.1 pwm=0.488 raspberry_pi: temp=41.0 mcu_temp: temp=31.3 sd_pos=54844 sysload=0.37 cputime=25.390 memavail=720824 print_time=473.387 buffer_time=2.883 print_stall=0 extruder: target=200 temp=199.9 pwm=0.704
Stats 469.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=115583 bytes_read=123609 bytes_retransmit=9 bytes_invalid=0 send_seq=4640 receive_seq=4640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=60 temp=60.1 pwm=0.401 raspberry_pi: temp=40.7 mcu_temp: temp=31.3 sd_pos=54910 sysload=0.37 cputime=25.457 memavail=720824 print_time=474.472 buffer_time=2.967 print_stall=0 extruder: target=200 temp=199.9 pwm=0.704
Stats 470.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=116129 bytes_read=124016 bytes_retransmit=9 bytes_invalid=0 send_seq=4659 receive_seq=4659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=60 temp=60.1 pwm=0.457 raspberry_pi: temp=41.0 mcu_temp: temp=31.3 sd_pos=54975 sysload=0.37 cputime=25.525 memavail=721076 print_time=475.584 buffer_time=3.078 print_stall=0 extruder: target=200 temp=200.0 pwm=0.645
Stats 471.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=116291 bytes_read=124360 bytes_retransmit=9 bytes_invalid=0 send_seq=4671 receive_seq=4671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=60 temp=60.1 pwm=0.406 raspberry_pi: temp=40.8 mcu_temp: temp=31.5 sd_pos=54975 sysload=0.58 cputime=25.588 memavail=720836 print_time=475.584 buffer_time=2.078 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 472.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=116848 bytes_read=124744 bytes_retransmit=9 bytes_invalid=0 send_seq=4688 receive_seq=4688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=60 temp=60.1 pwm=0.465 raspberry_pi: temp=41.2 mcu_temp: temp=31.3 sd_pos=55041 sysload=0.58 cputime=25.655 memavail=720856 print_time=476.726 buffer_time=2.219 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 473.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=117414 bytes_read=125146 bytes_retransmit=9 bytes_invalid=0 send_seq=4706 receive_seq=4706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996839 heater_bed: target=60 temp=60.1 pwm=0.385 raspberry_pi: temp=41.4 mcu_temp: temp=31.4 sd_pos=55107 sysload=0.58 cputime=25.726 memavail=720228 print_time=477.831 buffer_time=2.324 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 474.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=117981 bytes_read=125540 bytes_retransmit=9 bytes_invalid=0 send_seq=4725 receive_seq=4725 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996917 heater_bed: target=60 temp=60.1 pwm=0.442 raspberry_pi: temp=41.5 mcu_temp: temp=31.5 sd_pos=55173 sysload=0.58 cputime=25.794 memavail=719988 print_time=478.910 buffer_time=2.402 print_stall=0 extruder: target=200 temp=200.1 pwm=0.698
Stats 475.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=118533 bytes_read=125943 bytes_retransmit=9 bytes_invalid=0 send_seq=4743 receive_seq=4743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=60 temp=60.1 pwm=0.440 raspberry_pi: temp=41.0 mcu_temp: temp=31.4 sd_pos=55239 sysload=0.58 cputime=25.863 memavail=719988 print_time=479.963 buffer_time=2.453 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 476.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=119040 bytes_read=126321 bytes_retransmit=9 bytes_invalid=0 send_seq=4759 receive_seq=4759 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996904 heater_bed: target=60 temp=60.1 pwm=0.440 raspberry_pi: temp=41.3 mcu_temp: temp=31.3 sd_pos=55305 sysload=0.53 cputime=25.930 memavail=719496 print_time=480.988 buffer_time=2.479 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 477.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=119539 bytes_read=126690 bytes_retransmit=9 bytes_invalid=0 send_seq=4776 receive_seq=4776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996899 heater_bed: target=60 temp=60.1 pwm=0.440 raspberry_pi: temp=41.6 mcu_temp: temp=31.5 sd_pos=55371 sysload=0.53 cputime=25.997 memavail=719020 print_time=481.987 buffer_time=2.477 print_stall=0 extruder: target=200 temp=199.9 pwm=0.753
Stats 478.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=120020 bytes_read=127078 bytes_retransmit=9 bytes_invalid=0 send_seq=4791 receive_seq=4791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996894 heater_bed: target=60 temp=60.1 pwm=0.440 raspberry_pi: temp=41.3 mcu_temp: temp=31.2 sd_pos=55437 sysload=0.53 cputime=26.064 memavail=719036 print_time=482.959 buffer_time=2.449 print_stall=0 extruder: target=200 temp=199.9 pwm=0.753
Stats 479.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=120544 bytes_read=127476 bytes_retransmit=9 bytes_invalid=0 send_seq=4808 receive_seq=4808 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=60 temp=60.1 pwm=0.428 raspberry_pi: temp=41.3 mcu_temp: temp=31.5 sd_pos=55503 sysload=0.53 cputime=26.132 memavail=719248 print_time=483.905 buffer_time=2.394 print_stall=0 extruder: target=200 temp=199.9 pwm=0.753
Stats 480.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=121214 bytes_read=127855 bytes_retransmit=9 bytes_invalid=0 send_seq=4827 receive_seq=4827 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996882 heater_bed: target=60 temp=60.1 pwm=0.410 raspberry_pi: temp=41.6 mcu_temp: temp=31.5 sd_pos=55576 sysload=0.53 cputime=26.205 memavail=719060 print_time=484.823 buffer_time=2.312 print_stall=0 extruder: target=200 temp=199.9 pwm=0.753
Stats 481.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=121748 bytes_read=128258 bytes_retransmit=9 bytes_invalid=0 send_seq=4845 receive_seq=4845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996895 heater_bed: target=60 temp=60.1 pwm=0.424 raspberry_pi: temp=41.5 mcu_temp: temp=31.6 sd_pos=55641 sysload=0.49 cputime=26.273 memavail=719060 print_time=485.716 buffer_time=2.201 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 482.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=122264 bytes_read=128636 bytes_retransmit=9 bytes_invalid=0 send_seq=4861 receive_seq=4861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996889 heater_bed: target=60 temp=60.1 pwm=0.489 raspberry_pi: temp=41.5 mcu_temp: temp=31.5 sd_pos=55707 sysload=0.49 cputime=26.341 memavail=718808 print_time=486.581 buffer_time=2.064 print_stall=0 extruder: target=200 temp=200.0 pwm=0.674
Stats 483.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=123099 bytes_read=129027 bytes_retransmit=9 bytes_invalid=0 send_seq=4883 receive_seq=4883 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996884 heater_bed: target=60 temp=60.1 pwm=0.454 raspberry_pi: temp=41.5 mcu_temp: temp=31.7 sd_pos=55839 sysload=0.49 cputime=26.415 memavail=718564 print_time=488.232 buffer_time=2.712 print_stall=0 extruder: target=200 temp=200.1 pwm=0.674
Stats 484.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000062 bytes_write=123607 bytes_read=129423 bytes_retransmit=9 bytes_invalid=0 send_seq=4899 receive_seq=4899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996884 heater_bed: target=60 temp=60.1 pwm=0.395 raspberry_pi: temp=41.8 mcu_temp: temp=31.5 sd_pos=55905 sysload=0.49 cputime=26.484 memavail=719356 print_time=489.018 buffer_time=2.495 print_stall=0 extruder: target=200 temp=200.1 pwm=0.674
Stats 485.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000062 bytes_write=124174 bytes_read=129804 bytes_retransmit=9 bytes_invalid=0 send_seq=4916 receive_seq=4916 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996879 heater_bed: target=60 temp=60.1 pwm=0.464 raspberry_pi: temp=41.0 mcu_temp: temp=31.6 sd_pos=55971 sysload=0.49 cputime=26.553 memavail=719316 print_time=489.777 buffer_time=2.251 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 486.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000062 bytes_write=124973 bytes_read=130188 bytes_retransmit=9 bytes_invalid=0 send_seq=4936 receive_seq=4936 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996874 heater_bed: target=60 temp=60.1 pwm=0.464 raspberry_pi: temp=41.4 mcu_temp: temp=31.5 sd_pos=56097 sysload=0.45 cputime=26.623 memavail=719368 print_time=491.214 buffer_time=2.685 print_stall=0 extruder: target=200 temp=200.2 pwm=0.672
Stats 487.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000062 bytes_write=125498 bytes_read=130586 bytes_retransmit=9 bytes_invalid=0 send_seq=4953 receive_seq=4953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996869 heater_bed: target=60 temp=60.1 pwm=0.429 raspberry_pi: temp=40.6 mcu_temp: temp=31.6 sd_pos=56163 sysload=0.45 cputime=26.691 memavail=719620 print_time=491.893 buffer_time=2.361 print_stall=0 extruder: target=200 temp=200.2 pwm=0.672
Stats 488.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000062 bytes_write=126047 bytes_read=130964 bytes_retransmit=9 bytes_invalid=0 send_seq=4969 receive_seq=4969 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996863 heater_bed: target=60 temp=60.1 pwm=0.429 raspberry_pi: temp=41.3 mcu_temp: temp=31.5 sd_pos=56229 sysload=0.45 cputime=26.760 memavail=719380 print_time=492.545 buffer_time=2.010 print_stall=0 extruder: target=200 temp=200.2 pwm=0.672
Stats 489.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000062 bytes_write=126922 bytes_read=131353 bytes_retransmit=9 bytes_invalid=0 send_seq=4990 receive_seq=4990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=60 temp=60.1 pwm=0.429 raspberry_pi: temp=40.5 mcu_temp: temp=31.7 sd_pos=56360 sysload=0.45 cputime=26.830 memavail=719140 print_time=493.770 buffer_time=2.230 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 490.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=127724 bytes_read=131781 bytes_retransmit=9 bytes_invalid=0 send_seq=5010 receive_seq=5010 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996855 heater_bed: target=60 temp=60.1 pwm=0.429 raspberry_pi: temp=40.7 mcu_temp: temp=31.7 sd_pos=56490 sysload=0.45 cputime=26.899 memavail=719140 print_time=494.887 buffer_time=2.345 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 491.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=128539 bytes_read=132184 bytes_retransmit=9 bytes_invalid=0 send_seq=5031 receive_seq=5031 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996850 heater_bed: target=60 temp=60.1 pwm=0.409 raspberry_pi: temp=41.5 mcu_temp: temp=31.8 sd_pos=56621 sysload=0.41 cputime=26.968 memavail=719140 print_time=495.899 buffer_time=2.353 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 492.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=129354 bytes_read=132583 bytes_retransmit=9 bytes_invalid=0 send_seq=5054 receive_seq=5054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996841 heater_bed: target=60 temp=60.1 pwm=0.451 raspberry_pi: temp=40.6 mcu_temp: temp=31.8 sd_pos=56753 sysload=0.41 cputime=27.037 memavail=719140 print_time=496.803 buffer_time=2.255 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 493.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=130183 bytes_read=133020 bytes_retransmit=9 bytes_invalid=0 send_seq=5076 receive_seq=5076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996838 heater_bed: target=60 temp=60.1 pwm=0.462 raspberry_pi: temp=41.0 mcu_temp: temp=31.9 sd_pos=56885 sysload=0.41 cputime=27.111 memavail=719432 print_time=497.601 buffer_time=2.048 print_stall=0 extruder: target=200 temp=200.0 pwm=0.709
Stats 494.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=131381 bytes_read=133439 bytes_retransmit=9 bytes_invalid=0 send_seq=5103 receive_seq=5103 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996835 heater_bed: target=60 temp=60.1 pwm=0.336 raspberry_pi: temp=41.1 mcu_temp: temp=31.7 sd_pos=57081 sysload=0.41 cputime=27.183 memavail=719432 print_time=498.597 buffer_time=2.043 print_stall=0 extruder: target=200 temp=200.0 pwm=0.709
Stats 495.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=132885 bytes_read=133898 bytes_retransmit=9 bytes_invalid=0 send_seq=5135 receive_seq=5135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996831 heater_bed: target=60 temp=60.1 pwm=0.475 raspberry_pi: temp=40.8 mcu_temp: temp=31.9 sd_pos=57345 sysload=0.41 cputime=27.255 memavail=719640 print_time=499.553 buffer_time=1.996 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 496.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=135367 bytes_read=134465 bytes_retransmit=9 bytes_invalid=0 send_seq=5183 receive_seq=5183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996828 heater_bed: target=60 temp=60.1 pwm=0.384 raspberry_pi: temp=40.2 mcu_temp: temp=31.8 sd_pos=57888 sysload=0.38 cputime=27.336 memavail=719688 print_time=500.794 buffer_time=2.234 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 497.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=136438 bytes_read=134874 bytes_retransmit=9 bytes_invalid=0 send_seq=5208 receive_seq=5208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996819 heater_bed: target=60 temp=60.1 pwm=0.412 raspberry_pi: temp=40.9 mcu_temp: temp=31.8 sd_pos=57984 sysload=0.38 cputime=27.405 memavail=719688 print_time=501.893 buffer_time=2.331 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 498.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=137246 bytes_read=135273 bytes_retransmit=9 bytes_invalid=0 send_seq=5228 receive_seq=5228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996823 heater_bed: target=60 temp=60.1 pwm=0.412 raspberry_pi: temp=40.5 mcu_temp: temp=32.0 sd_pos=58040 sysload=0.38 cputime=27.473 memavail=719688 print_time=502.761 buffer_time=2.196 print_stall=0 extruder: target=200 temp=199.8 pwm=0.718
Stats 499.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=138153 bytes_read=135695 bytes_retransmit=9 bytes_invalid=0 send_seq=5250 receive_seq=5250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996821 heater_bed: target=60 temp=60.1 pwm=0.412 raspberry_pi: temp=40.9 mcu_temp: temp=32.0 sd_pos=58135 sysload=0.38 cputime=27.541 memavail=719696 print_time=503.707 buffer_time=2.139 print_stall=0 extruder: target=200 temp=199.8 pwm=0.718
Stats 500.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=138956 bytes_read=136094 bytes_retransmit=9 bytes_invalid=0 send_seq=5270 receive_seq=5270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996826 heater_bed: target=60 temp=60.1 pwm=0.412 raspberry_pi: temp=40.8 mcu_temp: temp=32.1 sd_pos=58191 sysload=0.38 cputime=27.608 memavail=719696 print_time=504.598 buffer_time=2.028 print_stall=0 extruder: target=200 temp=199.9 pwm=0.718
Stats 501.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=139925 bytes_read=136519 bytes_retransmit=9 bytes_invalid=0 send_seq=5293 receive_seq=5293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996824 heater_bed: target=60 temp=60.1 pwm=0.451 raspberry_pi: temp=40.6 mcu_temp: temp=32.1 sd_pos=58287 sysload=0.35 cputime=27.677 memavail=719696 print_time=505.568 buffer_time=1.995 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 502.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=141053 bytes_read=136961 bytes_retransmit=9 bytes_invalid=0 send_seq=5319 receive_seq=5319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=60 temp=60.1 pwm=0.377 raspberry_pi: temp=40.7 mcu_temp: temp=32.1 sd_pos=58426 sysload=0.35 cputime=27.748 memavail=719696 print_time=507.347 buffer_time=2.772 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 503.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=141393 bytes_read=137310 bytes_retransmit=9 bytes_invalid=0 send_seq=5332 receive_seq=5332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996832 heater_bed: target=60 temp=60.1 pwm=0.508 raspberry_pi: temp=41.5 mcu_temp: temp=32.1 sd_pos=58456 sysload=0.35 cputime=27.815 memavail=719708 print_time=508.167 buffer_time=2.590 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 504.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=142563 bytes_read=137749 bytes_retransmit=9 bytes_invalid=0 send_seq=5360 receive_seq=5360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996829 heater_bed: target=60 temp=60.1 pwm=0.413 raspberry_pi: temp=41.1 mcu_temp: temp=32.0 sd_pos=58577 sysload=0.35 cputime=27.885 memavail=719756 print_time=510.206 buffer_time=3.626 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 505.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=142752 bytes_read=138141 bytes_retransmit=9 bytes_invalid=0 send_seq=5373 receive_seq=5373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996827 heater_bed: target=60 temp=60.1 pwm=0.350 raspberry_pi: temp=41.4 mcu_temp: temp=32.1 sd_pos=58577 sysload=0.35 cputime=27.950 memavail=719756 print_time=510.206 buffer_time=2.623 print_stall=0 extruder: target=200 temp=200.1 pwm=0.659
Stats 506.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=143482 bytes_read=138520 bytes_retransmit=9 bytes_invalid=0 send_seq=5392 receive_seq=5392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996830 heater_bed: target=60 temp=60.1 pwm=0.420 raspberry_pi: temp=40.8 mcu_temp: temp=32.0 sd_pos=58663 sysload=0.32 cputime=28.018 memavail=719756 print_time=511.226 buffer_time=2.639 print_stall=0 extruder: target=200 temp=200.1 pwm=0.659
Stats 507.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=143815 bytes_read=138879 bytes_retransmit=9 bytes_invalid=0 send_seq=5404 receive_seq=5404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=60 temp=60.1 pwm=0.420 raspberry_pi: temp=41.4 mcu_temp: temp=31.8 sd_pos=58692 sysload=0.32 cputime=28.082 memavail=719540 print_time=511.952 buffer_time=2.364 print_stall=0 extruder: target=200 temp=200.1 pwm=0.659
Stats 508.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=145505 bytes_read=139366 bytes_retransmit=9 bytes_invalid=0 send_seq=5439 receive_seq=5439 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996847 heater_bed: target=60 temp=60.1 pwm=0.420 raspberry_pi: temp=41.0 mcu_temp: temp=31.9 sd_pos=59014 sysload=0.32 cputime=28.156 memavail=718784 print_time=513.824 buffer_time=3.232 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 509.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=145684 bytes_read=139695 bytes_retransmit=9 bytes_invalid=0 send_seq=5450 receive_seq=5450 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=60 temp=60.1 pwm=0.434 raspberry_pi: temp=41.2 mcu_temp: temp=31.9 sd_pos=59014 sysload=0.32 cputime=28.219 memavail=718668 print_time=513.824 buffer_time=2.231 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 510.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=147143 bytes_read=140157 bytes_retransmit=9 bytes_invalid=0 send_seq=5481 receive_seq=5481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=60 temp=60.1 pwm=0.434 raspberry_pi: temp=41.5 mcu_temp: temp=32.1 sd_pos=59276 sysload=0.32 cputime=28.289 memavail=718668 print_time=514.640 buffer_time=2.044 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 511.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=148633 bytes_read=140624 bytes_retransmit=9 bytes_invalid=0 send_seq=5512 receive_seq=5512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996847 heater_bed: target=60 temp=60.1 pwm=0.341 raspberry_pi: temp=41.2 mcu_temp: temp=32.3 sd_pos=59537 sysload=0.30 cputime=28.361 memavail=717916 print_time=515.841 buffer_time=2.242 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 512.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=149830 bytes_read=141038 bytes_retransmit=9 bytes_invalid=0 send_seq=5538 receive_seq=5538 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996850 heater_bed: target=60 temp=60.1 pwm=0.334 raspberry_pi: temp=41.4 mcu_temp: temp=32.0 sd_pos=59731 sysload=0.30 cputime=28.433 memavail=717916 print_time=516.993 buffer_time=2.391 print_stall=0 extruder: target=200 temp=199.9 pwm=0.713
Stats 513.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=150703 bytes_read=141452 bytes_retransmit=9 bytes_invalid=0 send_seq=5561 receive_seq=5561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996848 heater_bed: target=60 temp=60.1 pwm=0.420 raspberry_pi: temp=41.1 mcu_temp: temp=32.1 sd_pos=59863 sysload=0.30 cputime=28.504 memavail=717676 print_time=517.881 buffer_time=2.277 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 514.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=151541 bytes_read=141864 bytes_retransmit=9 bytes_invalid=0 send_seq=5581 receive_seq=5581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996848 heater_bed: target=60 temp=60.1 pwm=0.420 raspberry_pi: temp=41.0 mcu_temp: temp=32.3 sd_pos=59995 sysload=0.30 cputime=28.577 memavail=717684 print_time=518.865 buffer_time=2.258 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 515.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=152463 bytes_read=142273 bytes_retransmit=9 bytes_invalid=0 send_seq=5603 receive_seq=5603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=167996844 heater_bed: target=60 temp=60.1 pwm=0.358 raspberry_pi: temp=41.0 mcu_temp: temp=32.1 sd_pos=60125 sysload=0.30 cputime=28.647 memavail=717684 print_time=519.945 buffer_time=2.335 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 516.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=153388 bytes_read=142701 bytes_retransmit=9 bytes_invalid=0 send_seq=5626 receive_seq=5626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=60 temp=60.1 pwm=0.402 raspberry_pi: temp=41.1 mcu_temp: temp=32.2 sd_pos=60257 sysload=0.27 cputime=28.720 memavail=717684 print_time=521.122 buffer_time=2.507 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 517.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=153921 bytes_read=143089 bytes_retransmit=9 bytes_invalid=0 send_seq=5644 receive_seq=5644 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=60 temp=60.1 pwm=0.387 raspberry_pi: temp=41.2 mcu_temp: temp=32.1 sd_pos=60323 sysload=0.27 cputime=28.789 memavail=717684 print_time=521.746 buffer_time=2.129 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 518.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=154721 bytes_read=143478 bytes_retransmit=9 bytes_invalid=0 send_seq=5665 receive_seq=5665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996835 heater_bed: target=60 temp=60.1 pwm=0.387 raspberry_pi: temp=41.4 mcu_temp: temp=32.2 sd_pos=60454 sysload=0.27 cputime=28.859 memavail=717684 print_time=523.066 buffer_time=2.446 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 519.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=155311 bytes_read=143876 bytes_retransmit=9 bytes_invalid=0 send_seq=5682 receive_seq=5682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996833 heater_bed: target=60 temp=60.1 pwm=0.485 raspberry_pi: temp=41.3 mcu_temp: temp=32.0 sd_pos=60520 sysload=0.27 cputime=28.928 memavail=717688 print_time=523.762 buffer_time=2.139 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 520.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=156194 bytes_read=144299 bytes_retransmit=9 bytes_invalid=0 send_seq=5704 receive_seq=5704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996830 heater_bed: target=60 temp=60.1 pwm=0.412 raspberry_pi: temp=41.0 mcu_temp: temp=32.1 sd_pos=60651 sysload=0.27 cputime=28.999 memavail=717796 print_time=525.226 buffer_time=2.601 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 521.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=156731 bytes_read=144663 bytes_retransmit=9 bytes_invalid=0 send_seq=5720 receive_seq=5720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996833 heater_bed: target=60 temp=60.1 pwm=0.412 raspberry_pi: temp=40.7 mcu_temp: temp=32.3 sd_pos=60717 sysload=0.25 cputime=29.067 memavail=717824 print_time=525.994 buffer_time=2.366 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 522.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=157249 bytes_read=145056 bytes_retransmit=9 bytes_invalid=0 send_seq=5736 receive_seq=5736 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996830 heater_bed: target=60 temp=60.1 pwm=0.412 raspberry_pi: temp=41.0 mcu_temp: temp=32.1 sd_pos=60783 sysload=0.25 cputime=29.134 memavail=717824 print_time=526.786 buffer_time=2.155 print_stall=0 extruder: target=200 temp=200.1 pwm=0.679
Stats 523.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=158257 bytes_read=145469 bytes_retransmit=9 bytes_invalid=0 send_seq=5760 receive_seq=5759 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=167996827 heater_bed: target=60 temp=60.1 pwm=0.412 raspberry_pi: temp=40.6 mcu_temp: temp=32.3 sd_pos=60924 sysload=0.25 cputime=29.210 memavail=717824 print_time=528.443 buffer_time=2.805 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 524.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=158767 bytes_read=145843 bytes_retransmit=9 bytes_invalid=0 send_seq=5777 receive_seq=5777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996824 heater_bed: target=60 temp=60.0 pwm=0.500 raspberry_pi: temp=41.5 mcu_temp: temp=32.4 sd_pos=60991 sysload=0.25 cputime=29.283 memavail=717600 print_time=529.307 buffer_time=2.668 print_stall=0 extruder: target=200 temp=199.9 pwm=0.679
Stats 525.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=159379 bytes_read=146256 bytes_retransmit=9 bytes_invalid=0 send_seq=5794 receive_seq=5794 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996823 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=41.4 mcu_temp: temp=32.4 sd_pos=61057 sysload=0.25 cputime=29.355 memavail=717384 print_time=530.195 buffer_time=2.553 print_stall=0 extruder: target=200 temp=200.0 pwm=0.689
Stats 526.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=159915 bytes_read=146639 bytes_retransmit=9 bytes_invalid=0 send_seq=5811 receive_seq=5811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996819 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=41.1 mcu_temp: temp=32.4 sd_pos=61124 sysload=0.23 cputime=29.426 memavail=717384 print_time=531.107 buffer_time=2.463 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 527.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=160437 bytes_read=147003 bytes_retransmit=9 bytes_invalid=0 send_seq=5827 receive_seq=5827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996825 heater_bed: target=60 temp=60.1 pwm=0.390 raspberry_pi: temp=41.4 mcu_temp: temp=32.3 sd_pos=61191 sysload=0.23 cputime=29.495 memavail=717388 print_time=532.043 buffer_time=2.396 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 528.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=161000 bytes_read=147420 bytes_retransmit=9 bytes_invalid=0 send_seq=5845 receive_seq=5845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996825 heater_bed: target=60 temp=60.0 pwm=0.451 raspberry_pi: temp=40.9 mcu_temp: temp=32.5 sd_pos=61258 sysload=0.23 cputime=29.566 memavail=717388 print_time=533.003 buffer_time=2.353 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 529.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000057 bytes_write=161508 bytes_read=147784 bytes_retransmit=9 bytes_invalid=0 send_seq=5861 receive_seq=5861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996844 heater_bed: target=60 temp=60.0 pwm=0.451 raspberry_pi: temp=41.5 mcu_temp: temp=32.4 sd_pos=61325 sysload=0.23 cputime=29.638 memavail=717396 print_time=533.987 buffer_time=2.334 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 530.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=162047 bytes_read=148173 bytes_retransmit=9 bytes_invalid=0 send_seq=5879 receive_seq=5879 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=41.4 mcu_temp: temp=32.4 sd_pos=61392 sysload=0.23 cputime=29.708 memavail=717396 print_time=534.995 buffer_time=2.339 print_stall=0 extruder: target=200 temp=199.8 pwm=0.700
Stats 531.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=162559 bytes_read=148580 bytes_retransmit=9 bytes_invalid=0 send_seq=5895 receive_seq=5895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996837 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=41.5 mcu_temp: temp=32.5 sd_pos=61458 sysload=0.21 cputime=29.777 memavail=717396 print_time=536.040 buffer_time=2.380 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 532.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=163057 bytes_read=148939 bytes_retransmit=9 bytes_invalid=0 send_seq=5910 receive_seq=5910 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996838 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=40.7 mcu_temp: temp=32.3 sd_pos=61525 sysload=0.21 cputime=29.845 memavail=717396 print_time=537.048 buffer_time=2.385 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 533.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=163580 bytes_read=149323 bytes_retransmit=9 bytes_invalid=0 send_seq=5927 receive_seq=5927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996836 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=41.9 mcu_temp: temp=32.3 sd_pos=61590 sysload=0.21 cputime=29.914 memavail=717396 print_time=538.032 buffer_time=2.366 print_stall=0 extruder: target=200 temp=199.8 pwm=0.700
Stats 534.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=164115 bytes_read=149714 bytes_retransmit=9 bytes_invalid=0 send_seq=5944 receive_seq=5944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=41.7 mcu_temp: temp=32.3 sd_pos=61657 sysload=0.21 cputime=29.992 memavail=717404 print_time=538.992 buffer_time=2.324 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 535.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=164630 bytes_read=150083 bytes_retransmit=9 bytes_invalid=0 send_seq=5960 receive_seq=5960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996842 heater_bed: target=60 temp=60.0 pwm=0.465 raspberry_pi: temp=41.1 mcu_temp: temp=32.4 sd_pos=61722 sysload=0.21 cputime=30.060 memavail=717408 print_time=539.928 buffer_time=2.257 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 536.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=165163 bytes_read=150465 bytes_retransmit=9 bytes_invalid=0 send_seq=5977 receive_seq=5977 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=41.8 mcu_temp: temp=32.5 sd_pos=61789 sysload=0.19 cputime=30.131 memavail=717408 print_time=540.840 buffer_time=2.166 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 537.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=165700 bytes_read=150862 bytes_retransmit=9 bytes_invalid=0 send_seq=5994 receive_seq=5994 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996837 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=41.5 mcu_temp: temp=32.6 sd_pos=61854 sysload=0.19 cputime=30.200 memavail=717408 print_time=541.728 buffer_time=2.050 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 538.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=166595 bytes_read=151256 bytes_retransmit=9 bytes_invalid=0 send_seq=6016 receive_seq=6016 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996835 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=41.7 mcu_temp: temp=32.5 sd_pos=61985 sysload=0.19 cputime=30.278 memavail=717408 print_time=543.432 buffer_time=2.751 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 539.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=167122 bytes_read=151640 bytes_retransmit=9 bytes_invalid=0 send_seq=6033 receive_seq=6033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996836 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=41.6 mcu_temp: temp=32.5 sd_pos=62052 sysload=0.19 cputime=30.350 memavail=717408 print_time=544.248 buffer_time=2.563 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 540.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=167647 bytes_read=152047 bytes_retransmit=9 bytes_invalid=0 send_seq=6049 receive_seq=6049 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996832 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=41.6 mcu_temp: temp=32.6 sd_pos=62117 sysload=0.19 cputime=30.421 memavail=717416 print_time=545.040 buffer_time=2.352 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 541.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=168174 bytes_read=152411 bytes_retransmit=9 bytes_invalid=0 send_seq=6065 receive_seq=6065 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996830 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=41.9 mcu_temp: temp=32.5 sd_pos=62183 sysload=0.18 cputime=30.489 memavail=717672 print_time=545.808 buffer_time=2.116 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 542.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=169088 bytes_read=152825 bytes_retransmit=9 bytes_invalid=0 send_seq=6088 receive_seq=6088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=167996826 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=41.9 mcu_temp: temp=32.6 sd_pos=62314 sysload=0.18 cputime=30.564 memavail=717932 print_time=547.272 buffer_time=2.574 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 543.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=169661 bytes_read=153227 bytes_retransmit=9 bytes_invalid=0 send_seq=6106 receive_seq=6106 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996824 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=41.9 mcu_temp: temp=32.5 sd_pos=62379 sysload=0.18 cputime=30.635 memavail=717692 print_time=547.968 buffer_time=2.269 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 544.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=170477 bytes_read=153626 bytes_retransmit=9 bytes_invalid=0 send_seq=6126 receive_seq=6126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996821 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.2 mcu_temp: temp=32.7 sd_pos=62511 sysload=0.18 cputime=30.711 memavail=718460 print_time=549.289 buffer_time=2.587 print_stall=0 extruder: target=200 temp=200.0 pwm=0.710
Stats 545.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=171049 bytes_read=154005 bytes_retransmit=9 bytes_invalid=0 send_seq=6142 receive_seq=6142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996816 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=42.1 mcu_temp: temp=32.5 sd_pos=62578 sysload=0.18 cputime=30.781 memavail=718732 print_time=549.913 buffer_time=2.208 print_stall=0 extruder: target=200 temp=200.0 pwm=0.710
Stats 546.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=171871 bytes_read=154422 bytes_retransmit=9 bytes_invalid=0 send_seq=6163 receive_seq=6163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996813 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=42.3 mcu_temp: temp=32.6 sd_pos=62709 sysload=0.16 cputime=30.852 memavail=718932 print_time=551.089 buffer_time=2.381 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 547.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=172765 bytes_read=154816 bytes_retransmit=9 bytes_invalid=0 send_seq=6185 receive_seq=6185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996809 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=41.9 mcu_temp: temp=32.6 sd_pos=62840 sysload=0.16 cputime=30.925 memavail=719248 print_time=552.169 buffer_time=2.458 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 548.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=173627 bytes_read=155234 bytes_retransmit=9 bytes_invalid=0 send_seq=6206 receive_seq=6206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996807 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=42.0 mcu_temp: temp=32.6 sd_pos=62972 sysload=0.16 cputime=30.997 memavail=719536 print_time=553.153 buffer_time=2.439 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 549.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=174490 bytes_read=155642 bytes_retransmit=9 bytes_invalid=0 send_seq=6228 receive_seq=6228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996814 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=42.3 mcu_temp: temp=32.6 sd_pos=63104 sysload=0.16 cputime=31.068 memavail=719736 print_time=554.041 buffer_time=2.325 print_stall=0 extruder: target=200 temp=200.2 pwm=0.664
Stats 550.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=175402 bytes_read=156051 bytes_retransmit=9 bytes_invalid=0 send_seq=6250 receive_seq=6250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996812 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=42.3 mcu_temp: temp=32.7 sd_pos=63231 sysload=0.16 cputime=31.140 memavail=719812 print_time=554.833 buffer_time=2.114 print_stall=0 extruder: target=200 temp=200.2 pwm=0.649
Stats 551.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=176940 bytes_read=156524 bytes_retransmit=9 bytes_invalid=0 send_seq=6282 receive_seq=6282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996808 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=42.9 mcu_temp: temp=32.6 sd_pos=63495 sysload=0.23 cputime=31.213 memavail=720012 print_time=556.129 buffer_time=2.407 print_stall=0 extruder: target=200 temp=200.2 pwm=0.649
Stats 552.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=178773 bytes_read=157012 bytes_retransmit=9 bytes_invalid=0 send_seq=6320 receive_seq=6320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996818 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=42.1 mcu_temp: temp=32.8 sd_pos=63822 sysload=0.23 cputime=31.287 memavail=720316 print_time=557.209 buffer_time=2.484 print_stall=0 extruder: target=200 temp=200.1 pwm=0.649
Stats 553.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=180394 bytes_read=157466 bytes_retransmit=9 bytes_invalid=0 send_seq=6354 receive_seq=6354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996816 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=42.0 mcu_temp: temp=32.8 sd_pos=64107 sysload=0.23 cputime=31.359 memavail=720064 print_time=557.843 buffer_time=2.115 print_stall=0 extruder: target=200 temp=200.1 pwm=0.649
Stats 554.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=182058 bytes_read=157959 bytes_retransmit=9 bytes_invalid=0 send_seq=6390 receive_seq=6390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996816 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=41.9 mcu_temp: temp=32.7 sd_pos=64371 sysload=0.23 cputime=31.446 memavail=720068 print_time=559.015 buffer_time=2.283 print_stall=0 extruder: target=200 temp=200.1 pwm=0.704
Stats 555.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=183206 bytes_read=158424 bytes_retransmit=9 bytes_invalid=0 send_seq=6418 receive_seq=6418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996816 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=41.8 mcu_temp: temp=32.8 sd_pos=64458 sysload=0.23 cputime=31.520 memavail=719856 print_time=560.322 buffer_time=2.588 print_stall=0 extruder: target=200 temp=200.0 pwm=0.704
Stats 556.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=183817 bytes_read=158793 bytes_retransmit=9 bytes_invalid=0 send_seq=6435 receive_seq=6435 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996821 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=41.5 mcu_temp: temp=32.7 sd_pos=64525 sysload=0.37 cputime=31.589 memavail=720388 print_time=560.817 buffer_time=2.080 print_stall=0 extruder: target=200 temp=199.9 pwm=0.704
Stats 557.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=184926 bytes_read=159236 bytes_retransmit=9 bytes_invalid=0 send_seq=6461 receive_seq=6461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996816 heater_bed: target=60 temp=60.0 pwm=0.449 raspberry_pi: temp=41.2 mcu_temp: temp=32.8 sd_pos=64613 sysload=0.37 cputime=31.663 memavail=720340 print_time=562.159 buffer_time=2.420 print_stall=0 extruder: target=200 temp=199.9 pwm=0.704
Stats 558.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=185888 bytes_read=159649 bytes_retransmit=9 bytes_invalid=0 send_seq=6484 receive_seq=6484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996813 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=41.0 mcu_temp: temp=32.7 sd_pos=64710 sysload=0.37 cputime=31.734 memavail=720896 print_time=563.129 buffer_time=2.386 print_stall=0 extruder: target=200 temp=199.9 pwm=0.718
Stats 559.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=186670 bytes_read=160033 bytes_retransmit=9 bytes_invalid=0 send_seq=6504 receive_seq=6504 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996810 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=41.4 mcu_temp: temp=33.0 sd_pos=64785 sysload=0.37 cputime=31.802 memavail=720648 print_time=564.045 buffer_time=2.298 print_stall=0 extruder: target=200 temp=199.9 pwm=0.718
Stats 560.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=187182 bytes_read=160446 bytes_retransmit=9 bytes_invalid=0 send_seq=6521 receive_seq=6521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996809 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=41.4 mcu_temp: temp=32.7 sd_pos=64853 sysload=0.37 cputime=31.880 memavail=720668 print_time=564.908 buffer_time=2.158 print_stall=0 extruder: target=200 temp=199.9 pwm=0.718
Stats 561.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=188514 bytes_read=160869 bytes_retransmit=9 bytes_invalid=0 send_seq=6550 receive_seq=6550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996806 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=41.0 mcu_temp: temp=32.8 sd_pos=65003 sysload=0.50 cputime=31.953 memavail=720688 print_time=567.767 buffer_time=4.014 print_stall=0 extruder: target=200 temp=199.9 pwm=0.718
Stats 562.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=188671 bytes_read=161218 bytes_retransmit=9 bytes_invalid=0 send_seq=6560 receive_seq=6560 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996803 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=41.1 mcu_temp: temp=32.7 sd_pos=65003 sysload=0.50 cputime=32.019 memavail=720688 print_time=567.767 buffer_time=3.009 print_stall=0 extruder: target=200 temp=199.9 pwm=0.718
Stats 563.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=188855 bytes_read=161590 bytes_retransmit=9 bytes_invalid=0 send_seq=6572 receive_seq=6572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996801 heater_bed: target=60 temp=60.1 pwm=0.370 raspberry_pi: temp=41.2 mcu_temp: temp=32.8 sd_pos=65003 sysload=0.50 cputime=32.086 memavail=721192 print_time=567.767 buffer_time=2.007 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 564.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=189626 bytes_read=161969 bytes_retransmit=9 bytes_invalid=0 send_seq=6591 receive_seq=6591 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996799 heater_bed: target=60 temp=60.1 pwm=0.359 raspberry_pi: temp=41.9 mcu_temp: temp=32.9 sd_pos=65092 sysload=0.50 cputime=32.159 memavail=720688 print_time=568.787 buffer_time=2.023 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 565.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=190547 bytes_read=162398 bytes_retransmit=9 bytes_invalid=0 send_seq=6614 receive_seq=6614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996802 heater_bed: target=60 temp=60.0 pwm=0.445 raspberry_pi: temp=41.5 mcu_temp: temp=32.9 sd_pos=65187 sysload=0.50 cputime=32.237 memavail=721080 print_time=571.186 buffer_time=3.418 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 566.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=190715 bytes_read=162765 bytes_retransmit=9 bytes_invalid=0 send_seq=6625 receive_seq=6625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996799 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=41.4 mcu_temp: temp=32.9 sd_pos=65187 sysload=0.46 cputime=32.304 memavail=721080 print_time=571.186 buffer_time=2.417 print_stall=0 extruder: target=200 temp=200.1 pwm=0.686
Stats 567.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=192078 bytes_read=163209 bytes_retransmit=9 bytes_invalid=0 send_seq=6657 receive_seq=6657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996801 heater_bed: target=60 temp=60.0 pwm=0.512 raspberry_pi: temp=41.5 mcu_temp: temp=32.8 sd_pos=65383 sysload=0.46 cputime=32.376 memavail=721332 print_time=572.029 buffer_time=2.256 print_stall=0 extruder: target=200 temp=200.1 pwm=0.641
Stats 568.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=194047 bytes_read=163708 bytes_retransmit=9 bytes_invalid=0 send_seq=6697 receive_seq=6697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996809 heater_bed: target=60 temp=60.1 pwm=0.382 raspberry_pi: temp=41.1 mcu_temp: temp=32.9 sd_pos=65712 sysload=0.46 cputime=32.452 memavail=721292 print_time=572.882 buffer_time=2.106 print_stall=0 extruder: target=200 temp=200.1 pwm=0.641
Stats 569.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=195597 bytes_read=164185 bytes_retransmit=9 bytes_invalid=0 send_seq=6730 receive_seq=6730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996807 heater_bed: target=60 temp=60.1 pwm=0.346 raspberry_pi: temp=41.8 mcu_temp: temp=32.9 sd_pos=65974 sysload=0.46 cputime=32.528 memavail=720840 print_time=573.996 buffer_time=2.217 print_stall=0 extruder: target=200 temp=200.1 pwm=0.698
Stats 570.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=196888 bytes_read=164624 bytes_retransmit=9 bytes_invalid=0 send_seq=6759 receive_seq=6758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=167996807 heater_bed: target=60 temp=60.0 pwm=0.485 raspberry_pi: temp=41.8 mcu_temp: temp=33.1 sd_pos=66180 sysload=0.46 cputime=32.608 memavail=721356 print_time=575.083 buffer_time=2.297 print_stall=0 extruder: target=200 temp=200.1 pwm=0.698
Stats 571.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=197709 bytes_read=165033 bytes_retransmit=9 bytes_invalid=0 send_seq=6780 receive_seq=6780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996805 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=41.3 mcu_temp: temp=32.9 sd_pos=66311 sysload=0.43 cputime=32.679 memavail=721364 print_time=575.928 buffer_time=2.141 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 572.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=198556 bytes_read=165445 bytes_retransmit=9 bytes_invalid=0 send_seq=6800 receive_seq=6800 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996808 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=41.7 mcu_temp: temp=33.2 sd_pos=66442 sysload=0.43 cputime=32.751 memavail=721068 print_time=576.869 buffer_time=2.080 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 573.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=199413 bytes_read=165839 bytes_retransmit=9 bytes_invalid=0 send_seq=6822 receive_seq=6822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996809 heater_bed: target=60 temp=60.1 pwm=0.337 raspberry_pi: temp=41.3 mcu_temp: temp=32.9 sd_pos=66574 sysload=0.43 cputime=32.822 memavail=721120 print_time=577.906 buffer_time=2.114 print_stall=0 extruder: target=200 temp=200.0 pwm=0.659
Stats 574.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=200265 bytes_read=166243 bytes_retransmit=9 bytes_invalid=0 send_seq=6843 receive_seq=6843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996807 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=41.9 mcu_temp: temp=33.1 sd_pos=66706 sysload=0.43 cputime=32.895 memavail=720868 print_time=579.039 buffer_time=2.245 print_stall=0 extruder: target=200 temp=200.1 pwm=0.659
Stats 575.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=201187 bytes_read=166680 bytes_retransmit=9 bytes_invalid=0 send_seq=6865 receive_seq=6865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996817 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=41.0 mcu_temp: temp=32.9 sd_pos=66837 sysload=0.43 cputime=32.968 memavail=720884 print_time=580.268 buffer_time=2.472 print_stall=0 extruder: target=200 temp=200.0 pwm=0.719
Stats 576.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=201714 bytes_read=167044 bytes_retransmit=9 bytes_invalid=0 send_seq=6881 receive_seq=6881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996823 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=42.3 mcu_temp: temp=32.9 sd_pos=66904 sysload=0.55 cputime=33.036 memavail=720936 print_time=580.918 buffer_time=2.120 print_stall=0 extruder: target=200 temp=200.1 pwm=0.719
Stats 577.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=202627 bytes_read=167458 bytes_retransmit=9 bytes_invalid=0 send_seq=6904 receive_seq=6904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996819 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=41.5 mcu_temp: temp=33.1 sd_pos=67036 sysload=0.55 cputime=33.107 memavail=720944 print_time=582.291 buffer_time=2.490 print_stall=0 extruder: target=200 temp=200.0 pwm=0.712
Stats 578.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=203151 bytes_read=167850 bytes_retransmit=9 bytes_invalid=0 send_seq=6920 receive_seq=6920 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996814 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=41.6 mcu_temp: temp=33.1 sd_pos=67101 sysload=0.55 cputime=33.177 memavail=720944 print_time=583.014 buffer_time=2.208 print_stall=0 extruder: target=200 temp=200.0 pwm=0.712
Stats 579.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=203949 bytes_read=168254 bytes_retransmit=9 bytes_invalid=0 send_seq=6941 receive_seq=6941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996817 heater_bed: target=60 temp=60.0 pwm=0.500 raspberry_pi: temp=41.8 mcu_temp: temp=33.1 sd_pos=67233 sysload=0.55 cputime=33.250 memavail=720692 print_time=584.531 buffer_time=2.723 print_stall=0 extruder: target=200 temp=200.0 pwm=0.712
Stats 580.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=204452 bytes_read=168642 bytes_retransmit=9 bytes_invalid=0 send_seq=6956 receive_seq=6956 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996814 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=41.2 mcu_temp: temp=33.1 sd_pos=67299 sysload=0.51 cputime=33.321 memavail=720912 print_time=585.325 buffer_time=2.513 print_stall=0 extruder: target=200 temp=200.0 pwm=0.712
Stats 581.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=205024 bytes_read=169025 bytes_retransmit=9 bytes_invalid=0 send_seq=6973 receive_seq=6973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996815 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=41.4 mcu_temp: temp=32.9 sd_pos=67364 sysload=0.51 cputime=33.392 memavail=721188 print_time=586.144 buffer_time=2.328 print_stall=0 extruder: target=200 temp=200.0 pwm=0.714
Stats 582.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=205530 bytes_read=169384 bytes_retransmit=9 bytes_invalid=0 send_seq=6988 receive_seq=6988 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996825 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=41.1 mcu_temp: temp=33.1 sd_pos=67431 sysload=0.51 cputime=33.463 memavail=720992 print_time=586.986 buffer_time=2.167 print_stall=0 extruder: target=200 temp=199.9 pwm=0.714
Stats 583.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=206052 bytes_read=169777 bytes_retransmit=9 bytes_invalid=0 send_seq=7004 receive_seq=7004 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996831 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=41.3 mcu_temp: temp=33.1 sd_pos=67496 sysload=0.51 cputime=33.533 memavail=720992 print_time=587.853 buffer_time=2.030 print_stall=0 extruder: target=200 temp=199.9 pwm=0.714
Stats 584.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=206954 bytes_read=170190 bytes_retransmit=9 bytes_invalid=0 send_seq=7027 receive_seq=7027 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996827 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=42.2 mcu_temp: temp=33.2 sd_pos=67627 sysload=0.51 cputime=33.610 memavail=721484 print_time=589.658 buffer_time=2.831 print_stall=0 extruder: target=200 temp=200.0 pwm=0.714
Stats 585.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=207484 bytes_read=170570 bytes_retransmit=9 bytes_invalid=0 send_seq=7044 receive_seq=7044 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996823 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=41.8 mcu_temp: temp=33.2 sd_pos=67692 sysload=0.47 cputime=33.681 memavail=721324 print_time=590.596 buffer_time=2.767 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 586.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=208041 bytes_read=170956 bytes_retransmit=9 bytes_invalid=0 send_seq=7061 receive_seq=7061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996816 heater_bed: target=60 temp=60.0 pwm=0.474 raspberry_pi: temp=42.0 mcu_temp: temp=33.2 sd_pos=67757 sysload=0.47 cputime=33.753 memavail=721076 print_time=591.559 buffer_time=2.727 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 587.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=208579 bytes_read=171338 bytes_retransmit=9 bytes_invalid=0 send_seq=7078 receive_seq=7078 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996813 heater_bed: target=60 temp=60.0 pwm=0.442 raspberry_pi: temp=41.8 mcu_temp: temp=33.1 sd_pos=67823 sysload=0.47 cputime=33.826 memavail=720596 print_time=592.545 buffer_time=2.710 print_stall=0 extruder: target=200 temp=200.1 pwm=0.670
Stats 588.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=209117 bytes_read=171707 bytes_retransmit=9 bytes_invalid=0 send_seq=7095 receive_seq=7095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996810 heater_bed: target=60 temp=60.0 pwm=0.501 raspberry_pi: temp=42.2 mcu_temp: temp=33.3 sd_pos=67889 sysload=0.47 cputime=33.896 memavail=720860 print_time=593.557 buffer_time=2.720 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 589.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=209710 bytes_read=172110 bytes_retransmit=9 bytes_invalid=0 send_seq=7113 receive_seq=7113 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996814 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=41.5 mcu_temp: temp=33.1 sd_pos=67956 sysload=0.47 cputime=33.967 memavail=720864 print_time=594.597 buffer_time=2.756 print_stall=0 extruder: target=200 temp=200.1 pwm=0.670
Stats 590.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=210235 bytes_read=172508 bytes_retransmit=9 bytes_invalid=0 send_seq=7130 receive_seq=7130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996809 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=41.9 mcu_temp: temp=33.1 sd_pos=68023 sysload=0.43 cputime=34.040 memavail=720872 print_time=595.603 buffer_time=2.758 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 591.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=210756 bytes_read=172872 bytes_retransmit=9 bytes_invalid=0 send_seq=7146 receive_seq=7146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996805 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=41.9 mcu_temp: temp=33.1 sd_pos=68090 sysload=0.43 cputime=34.111 memavail=720152 print_time=596.584 buffer_time=2.736 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 592.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=211275 bytes_read=173279 bytes_retransmit=9 bytes_invalid=0 send_seq=7162 receive_seq=7162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996802 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=41.8 mcu_temp: temp=33.2 sd_pos=68157 sysload=0.43 cputime=34.183 memavail=720100 print_time=597.542 buffer_time=2.690 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 593.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=211840 bytes_read=173653 bytes_retransmit=9 bytes_invalid=0 send_seq=7180 receive_seq=7180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996800 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=41.8 mcu_temp: temp=33.3 sd_pos=68224 sysload=0.43 cputime=34.255 memavail=719912 print_time=598.476 buffer_time=2.620 print_stall=0 extruder: target=200 temp=199.9 pwm=0.738
Stats 594.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=212289 bytes_read=174042 bytes_retransmit=9 bytes_invalid=0 send_seq=7195 receive_seq=7195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=167996799 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=41.9 mcu_temp: temp=33.3 sd_pos=68291 sysload=0.43 cputime=34.328 memavail=719660 print_time=599.385 buffer_time=2.527 print_stall=0 extruder: target=200 temp=199.8 pwm=0.738
Stats 595.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=212800 bytes_read=174434 bytes_retransmit=9 bytes_invalid=0 send_seq=7211 receive_seq=7211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996804 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=41.9 mcu_temp: temp=33.2 sd_pos=68358 sysload=0.39 cputime=34.400 memavail=719664 print_time=600.271 buffer_time=2.409 print_stall=0 extruder: target=200 temp=199.8 pwm=0.738
Stats 596.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=213372 bytes_read=174803 bytes_retransmit=9 bytes_invalid=0 send_seq=7228 receive_seq=7228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996806 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=41.9 mcu_temp: temp=33.1 sd_pos=68425 sysload=0.39 cputime=34.470 memavail=719192 print_time=601.133 buffer_time=2.267 print_stall=0 extruder: target=200 temp=199.8 pwm=0.738
Stats 597.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=214039 bytes_read=175192 bytes_retransmit=9 bytes_invalid=0 send_seq=7246 receive_seq=7246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996802 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=41.8 mcu_temp: temp=33.3 sd_pos=68500 sysload=0.39 cputime=34.547 memavail=719452 print_time=601.970 buffer_time=2.102 print_stall=0 extruder: target=200 temp=199.8 pwm=0.735
Stats 598.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=214918 bytes_read=175614 bytes_retransmit=9 bytes_invalid=0 send_seq=7268 receive_seq=7268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996799 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=41.1 mcu_temp: temp=33.3 sd_pos=68633 sysload=0.39 cputime=34.620 memavail=719704 print_time=603.574 buffer_time=2.703 print_stall=0 extruder: target=200 temp=199.8 pwm=0.735
Stats 599.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=215375 bytes_read=175973 bytes_retransmit=9 bytes_invalid=0 send_seq=7283 receive_seq=7283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996797 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=42.3 mcu_temp: temp=33.3 sd_pos=68700 sysload=0.39 cputime=34.690 memavail=718912 print_time=604.339 buffer_time=2.465 print_stall=0 extruder: target=200 temp=199.8 pwm=0.735
Stats 600.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000063 bytes_write=215936 bytes_read=176362 bytes_retransmit=9 bytes_invalid=0 send_seq=7298 receive_seq=7298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996794 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=42.1 mcu_temp: temp=33.3 sd_pos=68767 sysload=0.36 cputime=34.760 memavail=718712 print_time=605.081 buffer_time=2.202 print_stall=0 extruder: target=200 temp=199.9 pwm=0.735
Stats 601.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000063 bytes_write=216876 bytes_read=176799 bytes_retransmit=9 bytes_invalid=0 send_seq=7323 receive_seq=7323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996791 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.1 mcu_temp: temp=33.3 sd_pos=68901 sysload=0.36 cputime=34.838 memavail=718212 print_time=606.492 buffer_time=2.611 print_stall=0 extruder: target=200 temp=199.9 pwm=0.681
Stats 602.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000063 bytes_write=217381 bytes_read=177163 bytes_retransmit=9 bytes_invalid=0 send_seq=7339 receive_seq=7339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996789 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.1 mcu_temp: temp=33.3 sd_pos=68966 sysload=0.36 cputime=34.908 memavail=718008 print_time=607.162 buffer_time=2.278 print_stall=0 extruder: target=200 temp=200.0 pwm=0.681
Stats 603.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000063 bytes_write=218292 bytes_read=177577 bytes_retransmit=9 bytes_invalid=0 send_seq=7362 receive_seq=7362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996787 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=41.9 mcu_temp: temp=33.3 sd_pos=69098 sysload=0.36 cputime=34.982 memavail=718508 print_time=608.429 buffer_time=2.542 print_stall=0 extruder: target=200 temp=200.1 pwm=0.681
Stats 604.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000063 bytes_write=218826 bytes_read=177974 bytes_retransmit=9 bytes_invalid=0 send_seq=7379 receive_seq=7379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996783 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=41.8 mcu_temp: temp=33.4 sd_pos=69165 sysload=0.36 cputime=35.056 memavail=719300 print_time=609.027 buffer_time=2.136 print_stall=0 extruder: target=200 temp=200.1 pwm=0.681
Stats 605.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=219745 bytes_read=178388 bytes_retransmit=9 bytes_invalid=0 send_seq=7402 receive_seq=7402 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996780 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.0 mcu_temp: temp=33.4 sd_pos=69298 sysload=0.41 cputime=35.131 memavail=719048 print_time=610.150 buffer_time=2.256 print_stall=0 extruder: target=200 temp=200.1 pwm=0.667
Stats 606.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=220545 bytes_read=178792 bytes_retransmit=9 bytes_invalid=0 send_seq=7423 receive_seq=7423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996779 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=42.6 mcu_temp: temp=33.3 sd_pos=69431 sysload=0.41 cputime=35.208 memavail=718796 print_time=611.177 buffer_time=2.281 print_stall=0 extruder: target=200 temp=200.1 pwm=0.667
Stats 607.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=221367 bytes_read=179204 bytes_retransmit=9 bytes_invalid=0 send_seq=7443 receive_seq=7443 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996790 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=42.1 mcu_temp: temp=33.3 sd_pos=69562 sysload=0.41 cputime=35.281 memavail=719056 print_time=612.109 buffer_time=2.209 print_stall=0 extruder: target=200 temp=200.1 pwm=0.667
Stats 608.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=222206 bytes_read=179588 bytes_retransmit=9 bytes_invalid=0 send_seq=7464 receive_seq=7463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996787 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=42.4 mcu_temp: temp=33.5 sd_pos=69696 sysload=0.41 cputime=35.356 memavail=718804 print_time=612.944 buffer_time=2.040 print_stall=0 extruder: target=200 temp=200.1 pwm=0.667
Stats 609.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=223781 bytes_read=180083 bytes_retransmit=9 bytes_invalid=0 send_seq=7497 receive_seq=7497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996795 heater_bed: target=60 temp=60.0 pwm=0.478 raspberry_pi: temp=42.3 mcu_temp: temp=33.7 sd_pos=69961 sysload=0.41 cputime=35.435 memavail=719056 print_time=614.326 buffer_time=2.421 print_stall=0 extruder: target=200 temp=200.1 pwm=0.677
Stats 610.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=225295 bytes_read=180560 bytes_retransmit=9 bytes_invalid=0 send_seq=7530 receive_seq=7530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996791 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=42.7 mcu_temp: temp=33.5 sd_pos=70229 sysload=0.38 cputime=35.509 memavail=719064 print_time=615.325 buffer_time=2.417 print_stall=0 extruder: target=200 temp=200.1 pwm=0.677
Stats 611.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=226846 bytes_read=180999 bytes_retransmit=9 bytes_invalid=0 send_seq=7563 receive_seq=7563 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996787 heater_bed: target=60 temp=60.0 pwm=0.462 raspberry_pi: temp=42.2 mcu_temp: temp=33.4 sd_pos=70495 sysload=0.38 cputime=35.582 memavail=718840 print_time=615.940 buffer_time=2.030 print_stall=0 extruder: target=200 temp=200.1 pwm=0.677
Stats 612.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=228607 bytes_read=181486 bytes_retransmit=9 bytes_invalid=0 send_seq=7599 receive_seq=7599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996792 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=42.3 mcu_temp: temp=33.6 sd_pos=70869 sysload=0.38 cputime=35.665 memavail=718960 print_time=616.956 buffer_time=2.042 print_stall=0 extruder: target=200 temp=200.1 pwm=0.677
Stats 613.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=229967 bytes_read=181939 bytes_retransmit=9 bytes_invalid=0 send_seq=7630 receive_seq=7630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=167996784 heater_bed: target=60 temp=60.0 pwm=0.473 raspberry_pi: temp=42.3 mcu_temp: temp=33.7 sd_pos=70987 sysload=0.38 cputime=35.743 memavail=718988 print_time=618.771 buffer_time=2.856 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 614.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=230656 bytes_read=182318 bytes_retransmit=9 bytes_invalid=0 send_seq=7649 receive_seq=7649 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996786 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=42.6 mcu_temp: temp=33.7 sd_pos=71056 sysload=0.38 cputime=35.816 memavail=718748 print_time=619.281 buffer_time=2.363 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 615.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=231739 bytes_read=182776 bytes_retransmit=9 bytes_invalid=0 send_seq=7675 receive_seq=7675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996781 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=43.1 mcu_temp: temp=33.5 sd_pos=71144 sysload=0.35 cputime=35.890 memavail=718508 print_time=620.670 buffer_time=2.750 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 616.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=232355 bytes_read=183164 bytes_retransmit=9 bytes_invalid=0 send_seq=7693 receive_seq=7693 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996785 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=42.5 mcu_temp: temp=33.5 sd_pos=71214 sysload=0.35 cputime=35.965 memavail=718256 print_time=621.193 buffer_time=2.263 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 617.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=233432 bytes_read=183573 bytes_retransmit=9 bytes_invalid=0 send_seq=7718 receive_seq=7718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996783 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=43.0 mcu_temp: temp=33.7 sd_pos=71320 sysload=0.35 cputime=36.045 memavail=718524 print_time=622.621 buffer_time=2.690 print_stall=0 extruder: target=200 temp=200.1 pwm=0.654
Stats 618.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=233928 bytes_read=183966 bytes_retransmit=9 bytes_invalid=0 send_seq=7734 receive_seq=7734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996785 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=42.9 mcu_temp: temp=33.5 sd_pos=71388 sysload=0.35 cputime=36.117 memavail=718524 print_time=623.484 buffer_time=2.552 print_stall=0 extruder: target=200 temp=200.1 pwm=0.654
Stats 619.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=234252 bytes_read=184324 bytes_retransmit=9 bytes_invalid=0 send_seq=7746 receive_seq=7746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996793 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=42.8 mcu_temp: temp=33.5 sd_pos=71419 sysload=0.35 cputime=36.188 memavail=718284 print_time=624.304 buffer_time=2.370 print_stall=0 extruder: target=200 temp=200.1 pwm=0.654
Stats 620.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=235491 bytes_read=184768 bytes_retransmit=9 bytes_invalid=0 send_seq=7775 receive_seq=7775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996790 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=42.6 mcu_temp: temp=33.6 sd_pos=71541 sysload=0.32 cputime=36.262 memavail=718540 print_time=626.377 buffer_time=3.440 print_stall=0 extruder: target=200 temp=200.1 pwm=0.654
Stats 621.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=235632 bytes_read=185131 bytes_retransmit=9 bytes_invalid=0 send_seq=7785 receive_seq=7785 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996789 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=42.3 mcu_temp: temp=33.7 sd_pos=71541 sysload=0.32 cputime=36.333 memavail=717984 print_time=626.377 buffer_time=2.437 print_stall=0 extruder: target=200 temp=200.1 pwm=0.654
Stats 622.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=236865 bytes_read=185564 bytes_retransmit=9 bytes_invalid=0 send_seq=7812 receive_seq=7812 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996790 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=41.5 mcu_temp: temp=33.5 sd_pos=71703 sysload=0.32 cputime=36.406 memavail=718296 print_time=627.027 buffer_time=2.083 print_stall=0 extruder: target=200 temp=200.1 pwm=0.675
Stats 623.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=238674 bytes_read=186033 bytes_retransmit=9 bytes_invalid=0 send_seq=7849 receive_seq=7849 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996793 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=42.3 mcu_temp: temp=33.5 sd_pos=72073 sysload=0.32 cputime=36.484 memavail=718300 print_time=628.126 buffer_time=2.179 print_stall=0 extruder: target=200 temp=200.0 pwm=0.675
Stats 624.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=240770 bytes_read=186580 bytes_retransmit=9 bytes_invalid=0 send_seq=7891 receive_seq=7890 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996788 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=41.7 mcu_temp: temp=33.7 sd_pos=72668 sysload=0.32 cputime=36.567 memavail=719088 print_time=629.128 buffer_time=2.178 print_stall=0 extruder: target=200 temp=199.9 pwm=0.747
Stats 625.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=242526 bytes_read=187054 bytes_retransmit=9 bytes_invalid=0 send_seq=7928 receive_seq=7928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996786 heater_bed: target=60 temp=60.0 pwm=0.443 raspberry_pi: temp=41.9 mcu_temp: temp=34.0 sd_pos=73002 sysload=0.30 cputime=36.647 memavail=719088 print_time=630.203 buffer_time=2.247 print_stall=0 extruder: target=200 temp=200.0 pwm=0.694
Stats 626.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=244317 bytes_read=187543 bytes_retransmit=9 bytes_invalid=0 send_seq=7966 receive_seq=7966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996789 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=41.9 mcu_temp: temp=33.5 sd_pos=73610 sysload=0.30 cputime=36.733 memavail=719100 print_time=630.972 buffer_time=2.012 print_stall=0 extruder: target=200 temp=199.9 pwm=0.694
Stats 627.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=245907 bytes_read=188025 bytes_retransmit=9 bytes_invalid=0 send_seq=8000 receive_seq=8000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996782 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=42.3 mcu_temp: temp=33.7 sd_pos=73863 sysload=0.30 cputime=36.822 memavail=719112 print_time=632.136 buffer_time=2.175 print_stall=0 extruder: target=200 temp=199.9 pwm=0.694
Stats 628.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=247024 bytes_read=188439 bytes_retransmit=9 bytes_invalid=0 send_seq=8026 receive_seq=8026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996782 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=42.3 mcu_temp: temp=33.5 sd_pos=73951 sysload=0.30 cputime=36.896 memavail=719112 print_time=633.483 buffer_time=2.520 print_stall=0 extruder: target=200 temp=199.8 pwm=0.694
Stats 629.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=247654 bytes_read=188843 bytes_retransmit=9 bytes_invalid=0 send_seq=8044 receive_seq=8044 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996780 heater_bed: target=60 temp=60.0 pwm=0.442 raspberry_pi: temp=41.8 mcu_temp: temp=33.5 sd_pos=74019 sysload=0.30 cputime=36.968 memavail=718860 print_time=633.991 buffer_time=2.025 print_stall=0 extruder: target=200 temp=199.8 pwm=0.722
Stats 630.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=248743 bytes_read=189285 bytes_retransmit=9 bytes_invalid=0 send_seq=8070 receive_seq=8070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996777 heater_bed: target=60 temp=60.0 pwm=0.512 raspberry_pi: temp=42.0 mcu_temp: temp=33.7 sd_pos=74107 sysload=0.27 cputime=37.046 memavail=718608 print_time=635.375 buffer_time=2.405 print_stall=0 extruder: target=200 temp=199.9 pwm=0.722
Stats 631.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=249661 bytes_read=189684 bytes_retransmit=9 bytes_invalid=0 send_seq=8093 receive_seq=8093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996773 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=42.3 mcu_temp: temp=33.7 sd_pos=74208 sysload=0.27 cputime=37.119 memavail=718608 print_time=636.374 buffer_time=2.402 print_stall=0 extruder: target=200 temp=199.9 pwm=0.722
Stats 632.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=250452 bytes_read=190088 bytes_retransmit=9 bytes_invalid=0 send_seq=8114 receive_seq=8114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996782 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=41.8 mcu_temp: temp=33.6 sd_pos=74283 sysload=0.27 cputime=37.191 memavail=718616 print_time=637.318 buffer_time=2.344 print_stall=0 extruder: target=200 temp=199.9 pwm=0.722
Stats 633.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=250990 bytes_read=190490 bytes_retransmit=9 bytes_invalid=0 send_seq=8132 receive_seq=8132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996778 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=41.9 mcu_temp: temp=33.8 sd_pos=74351 sysload=0.27 cputime=37.263 memavail=718616 print_time=638.182 buffer_time=2.204 print_stall=0 extruder: target=200 temp=199.9 pwm=0.704
Stats 634.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=251359 bytes_read=190839 bytes_retransmit=9 bytes_invalid=0 send_seq=8145 receive_seq=8145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996777 heater_bed: target=60 temp=60.0 pwm=0.455 raspberry_pi: temp=41.5 mcu_temp: temp=33.9 sd_pos=74382 sysload=0.27 cputime=37.335 memavail=718616 print_time=639.002 buffer_time=2.021 print_stall=0 extruder: target=200 temp=200.0 pwm=0.704
Stats 635.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=252539 bytes_read=191288 bytes_retransmit=9 bytes_invalid=0 send_seq=8172 receive_seq=8172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996771 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=42.3 mcu_temp: temp=33.7 sd_pos=74506 sysload=0.25 cputime=37.410 memavail=718620 print_time=641.077 buffer_time=3.093 print_stall=0 extruder: target=200 temp=200.0 pwm=0.704
Stats 636.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=252712 bytes_read=191654 bytes_retransmit=9 bytes_invalid=0 send_seq=8184 receive_seq=8184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996771 heater_bed: target=60 temp=60.0 pwm=0.466 raspberry_pi: temp=42.1 mcu_temp: temp=33.5 sd_pos=74506 sysload=0.25 cputime=37.479 memavail=718820 print_time=641.077 buffer_time=2.090 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 637.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=254864 bytes_read=192143 bytes_retransmit=9 bytes_invalid=0 send_seq=8227 receive_seq=8227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996765 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=42.1 mcu_temp: temp=34.0 sd_pos=74872 sysload=0.25 cputime=37.557 memavail=719436 print_time=642.435 buffer_time=2.445 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 638.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=256847 bytes_read=192637 bytes_retransmit=9 bytes_invalid=0 send_seq=8266 receive_seq=8266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=167996763 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=41.9 mcu_temp: temp=33.8 sd_pos=75276 sysload=0.25 cputime=37.632 memavail=719184 print_time=643.504 buffer_time=2.512 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 639.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=258830 bytes_read=193149 bytes_retransmit=9 bytes_invalid=0 send_seq=8306 receive_seq=8306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996764 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=42.7 mcu_temp: temp=34.0 sd_pos=75803 sysload=0.25 cputime=37.714 memavail=719204 print_time=644.291 buffer_time=2.297 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 640.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=260678 bytes_read=193643 bytes_retransmit=9 bytes_invalid=0 send_seq=8345 receive_seq=8345 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996763 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=41.9 mcu_temp: temp=33.7 sd_pos=76334 sysload=0.23 cputime=37.793 memavail=719512 print_time=645.262 buffer_time=2.264 print_stall=0 extruder: target=200 temp=200.2 pwm=0.637
Stats 641.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=262445 bytes_read=194122 bytes_retransmit=9 bytes_invalid=0 send_seq=8382 receive_seq=8381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996763 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=41.8 mcu_temp: temp=33.7 sd_pos=76755 sysload=0.23 cputime=37.873 memavail=719468 print_time=646.227 buffer_time=2.225 print_stall=0 extruder: target=200 temp=200.2 pwm=0.637
Stats 642.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=263547 bytes_read=194569 bytes_retransmit=9 bytes_invalid=0 send_seq=8408 receive_seq=8408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996772 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=42.3 mcu_temp: temp=33.9 sd_pos=76855 sysload=0.23 cputime=37.948 memavail=719540 print_time=647.350 buffer_time=2.346 print_stall=0 extruder: target=200 temp=200.1 pwm=0.708
Stats 643.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=264326 bytes_read=194958 bytes_retransmit=9 bytes_invalid=0 send_seq=8429 receive_seq=8429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996770 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=42.0 mcu_temp: temp=34.0 sd_pos=76912 sysload=0.23 cputime=38.020 memavail=719504 print_time=648.242 buffer_time=2.233 print_stall=0 extruder: target=200 temp=200.0 pwm=0.708
Stats 644.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=265246 bytes_read=195396 bytes_retransmit=9 bytes_invalid=0 send_seq=8451 receive_seq=8451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996774 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=42.3 mcu_temp: temp=34.0 sd_pos=77012 sysload=0.23 cputime=38.096 memavail=719564 print_time=649.213 buffer_time=2.201 print_stall=0 extruder: target=200 temp=200.1 pwm=0.708
Stats 645.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=266018 bytes_read=195799 bytes_retransmit=9 bytes_invalid=0 send_seq=8472 receive_seq=8472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996771 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=42.2 mcu_temp: temp=34.0 sd_pos=77069 sysload=0.21 cputime=38.168 memavail=719316 print_time=650.130 buffer_time=2.116 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 646.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=266949 bytes_read=196193 bytes_retransmit=9 bytes_invalid=0 send_seq=8495 receive_seq=8494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996773 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=42.3 mcu_temp: temp=33.8 sd_pos=77169 sysload=0.21 cputime=38.241 memavail=719124 print_time=651.127 buffer_time=2.109 print_stall=0 extruder: target=200 temp=199.9 pwm=0.720
Stats 647.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=267724 bytes_read=196611 bytes_retransmit=9 bytes_invalid=0 send_seq=8516 receive_seq=8515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996781 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=41.9 mcu_temp: temp=34.0 sd_pos=77244 sysload=0.21 cputime=38.315 memavail=719096 print_time=652.069 buffer_time=2.048 print_stall=0 extruder: target=200 temp=200.0 pwm=0.720
Stats 648.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=268383 bytes_read=196999 bytes_retransmit=9 bytes_invalid=0 send_seq=8533 receive_seq=8533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996786 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=42.1 mcu_temp: temp=34.1 sd_pos=77343 sysload=0.21 cputime=38.388 memavail=719672 print_time=653.752 buffer_time=2.727 print_stall=0 extruder: target=200 temp=200.0 pwm=0.720
Stats 649.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=269614 bytes_read=197423 bytes_retransmit=9 bytes_invalid=0 send_seq=8562 receive_seq=8561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996783 heater_bed: target=60 temp=60.0 pwm=0.507 raspberry_pi: temp=41.9 mcu_temp: temp=33.8 sd_pos=77467 sysload=0.21 cputime=38.462 memavail=719876 print_time=655.829 buffer_time=3.800 print_stall=0 extruder: target=200 temp=200.0 pwm=0.720
Stats 650.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=269787 bytes_read=197816 bytes_retransmit=9 bytes_invalid=0 send_seq=8574 receive_seq=8574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996787 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=41.9 mcu_temp: temp=34.0 sd_pos=77467 sysload=0.19 cputime=38.531 memavail=719924 print_time=655.829 buffer_time=2.797 print_stall=0 extruder: target=200 temp=200.0 pwm=0.720
Stats 651.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=271035 bytes_read=198254 bytes_retransmit=9 bytes_invalid=0 send_seq=8602 receive_seq=8602 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996782 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=42.0 mcu_temp: temp=33.8 sd_pos=77629 sysload=0.19 cputime=38.603 memavail=719728 print_time=656.474 buffer_time=2.439 print_stall=0 extruder: target=200 temp=200.0 pwm=0.663
Stats 652.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=272134 bytes_read=198668 bytes_retransmit=9 bytes_invalid=0 send_seq=8629 receive_seq=8628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996786 heater_bed: target=60 temp=60.0 pwm=0.484 raspberry_pi: temp=41.9 mcu_temp: temp=33.9 sd_pos=77834 sysload=0.19 cputime=38.676 memavail=720284 print_time=657.158 buffer_time=2.120 print_stall=0 extruder: target=200 temp=200.0 pwm=0.663
Stats 653.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=274235 bytes_read=199201 bytes_retransmit=9 bytes_invalid=0 send_seq=8672 receive_seq=8672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996791 heater_bed: target=60 temp=60.0 pwm=0.480 raspberry_pi: temp=41.9 mcu_temp: temp=34.0 sd_pos=78270 sysload=0.19 cputime=38.755 memavail=720044 print_time=658.276 buffer_time=2.234 print_stall=0 extruder: target=200 temp=200.1 pwm=0.663
Stats 654.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=276295 bytes_read=199719 bytes_retransmit=9 bytes_invalid=0 send_seq=8713 receive_seq=8713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996786 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=42.3 mcu_temp: temp=34.0 sd_pos=78793 sysload=0.19 cputime=38.836 memavail=719548 print_time=659.101 buffer_time=2.057 print_stall=0 extruder: target=200 temp=200.1 pwm=0.663
Stats 655.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=278186 bytes_read=200193 bytes_retransmit=9 bytes_invalid=0 send_seq=8752 receive_seq=8751 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996790 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=42.4 mcu_temp: temp=34.0 sd_pos=79328 sysload=0.26 cputime=38.915 memavail=719780 print_time=660.103 buffer_time=2.055 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 656.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=280144 bytes_read=200720 bytes_retransmit=9 bytes_invalid=0 send_seq=8791 receive_seq=8791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996781 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=41.8 mcu_temp: temp=34.1 sd_pos=79757 sysload=0.26 cputime=39.000 memavail=719844 print_time=661.076 buffer_time=2.025 print_stall=0 extruder: target=200 temp=200.1 pwm=0.712
Stats 657.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=281282 bytes_read=201139 bytes_retransmit=9 bytes_invalid=0 send_seq=8818 receive_seq=8818 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996796 heater_bed: target=60 temp=60.0 pwm=0.494 raspberry_pi: temp=42.0 mcu_temp: temp=34.1 sd_pos=79858 sysload=0.26 cputime=39.076 memavail=719676 print_time=662.196 buffer_time=2.142 print_stall=0 extruder: target=200 temp=200.0 pwm=0.715
Stats 658.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=282041 bytes_read=201523 bytes_retransmit=9 bytes_invalid=0 send_seq=8838 receive_seq=8838 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996792 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=41.9 mcu_temp: temp=34.0 sd_pos=79915 sysload=0.26 cputime=39.146 memavail=719736 print_time=663.085 buffer_time=2.028 print_stall=0 extruder: target=200 temp=200.0 pwm=0.715
Stats 659.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=282996 bytes_read=201985 bytes_retransmit=9 bytes_invalid=0 send_seq=8862 receive_seq=8862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996791 heater_bed: target=60 temp=60.0 pwm=0.454 raspberry_pi: temp=41.8 mcu_temp: temp=34.0 sd_pos=80016 sysload=0.26 cputime=39.222 memavail=720256 print_time=664.053 buffer_time=1.994 print_stall=0 extruder: target=200 temp=200.0 pwm=0.715
Stats 660.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=284229 bytes_read=202414 bytes_retransmit=9 bytes_invalid=0 send_seq=8891 receive_seq=8891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996788 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=41.9 mcu_temp: temp=34.0 sd_pos=80142 sysload=0.32 cputime=39.298 memavail=720008 print_time=665.486 buffer_time=2.423 print_stall=0 extruder: target=200 temp=200.0 pwm=0.715
Stats 661.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=285326 bytes_read=202842 bytes_retransmit=9 bytes_invalid=0 send_seq=8917 receive_seq=8917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996782 heater_bed: target=60 temp=60.0 pwm=0.476 raspberry_pi: temp=42.0 mcu_temp: temp=34.1 sd_pos=80247 sysload=0.32 cputime=39.372 memavail=720408 print_time=666.900 buffer_time=2.833 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 662.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=285838 bytes_read=203237 bytes_retransmit=9 bytes_invalid=0 send_seq=8934 receive_seq=8934 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996783 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=41.9 mcu_temp: temp=33.9 sd_pos=80315 sysload=0.32 cputime=39.446 memavail=720260 print_time=667.763 buffer_time=2.693 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 663.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=286185 bytes_read=203577 bytes_retransmit=9 bytes_invalid=0 send_seq=8947 receive_seq=8946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996782 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=42.3 mcu_temp: temp=34.0 sd_pos=80346 sysload=0.32 cputime=39.515 memavail=719780 print_time=668.583 buffer_time=2.512 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 664.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=287357 bytes_read=204026 bytes_retransmit=9 bytes_invalid=0 send_seq=8973 receive_seq=8973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996777 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=42.2 mcu_temp: temp=34.0 sd_pos=80470 sysload=0.32 cputime=39.594 memavail=720756 print_time=670.661 buffer_time=3.587 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 665.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=287525 bytes_read=204393 bytes_retransmit=9 bytes_invalid=0 send_seq=8984 receive_seq=8984 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996772 heater_bed: target=60 temp=60.0 pwm=0.479 raspberry_pi: temp=42.4 mcu_temp: temp=34.0 sd_pos=80470 sysload=0.37 cputime=39.663 memavail=721036 print_time=670.661 buffer_time=2.584 print_stall=0 extruder: target=200 temp=200.1 pwm=0.654
Stats 666.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=288785 bytes_read=204822 bytes_retransmit=9 bytes_invalid=0 send_seq=9013 receive_seq=9013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996772 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=41.9 mcu_temp: temp=34.3 sd_pos=80628 sysload=0.37 cputime=39.738 memavail=721304 print_time=671.306 buffer_time=2.225 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 667.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=290788 bytes_read=205316 bytes_retransmit=9 bytes_invalid=0 send_seq=9052 receive_seq=9052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996770 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=42.3 mcu_temp: temp=34.2 sd_pos=81029 sysload=0.37 cputime=39.816 memavail=721104 print_time=672.459 buffer_time=2.374 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 668.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=292157 bytes_read=205778 bytes_retransmit=9 bytes_invalid=0 send_seq=9082 receive_seq=9082 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996765 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=42.1 mcu_temp: temp=34.2 sd_pos=81269 sysload=0.37 cputime=39.892 memavail=721868 print_time=673.203 buffer_time=2.115 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 669.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=295036 bytes_read=206347 bytes_retransmit=9 bytes_invalid=0 send_seq=9136 receive_seq=9136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996762 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=42.0 mcu_temp: temp=34.2 sd_pos=81969 sysload=0.37 cputime=39.974 memavail=721836 print_time=674.677 buffer_time=2.586 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 670.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=296985 bytes_read=206851 bytes_retransmit=9 bytes_invalid=0 send_seq=9177 receive_seq=9177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996764 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=42.3 mcu_temp: temp=34.2 sd_pos=82545 sysload=0.42 cputime=40.054 memavail=722376 print_time=675.366 buffer_time=2.272 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 671.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=298385 bytes_read=207308 bytes_retransmit=9 bytes_invalid=0 send_seq=9207 receive_seq=9206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996774 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=42.5 mcu_temp: temp=34.2 sd_pos=82787 sysload=0.42 cputime=40.132 memavail=722144 print_time=676.274 buffer_time=2.176 print_stall=0 extruder: target=200 temp=200.0 pwm=0.664
Stats 672.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=299168 bytes_read=207697 bytes_retransmit=9 bytes_invalid=0 send_seq=9227 receive_seq=9227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996773 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=42.7 mcu_temp: temp=34.2 sd_pos=82849 sysload=0.42 cputime=40.206 memavail=722392 print_time=677.176 buffer_time=2.075 print_stall=0 extruder: target=200 temp=200.0 pwm=0.664
Stats 673.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=300431 bytes_read=208146 bytes_retransmit=9 bytes_invalid=0 send_seq=9257 receive_seq=9257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996770 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=42.5 mcu_temp: temp=34.2 sd_pos=82974 sysload=0.42 cputime=40.288 memavail=722916 print_time=678.562 buffer_time=2.459 print_stall=0 extruder: target=200 temp=200.0 pwm=0.664
Stats 674.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=301517 bytes_read=208598 bytes_retransmit=9 bytes_invalid=0 send_seq=9282 receive_seq=9282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996768 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=42.8 mcu_temp: temp=34.2 sd_pos=83061 sysload=0.42 cputime=40.365 memavail=722692 print_time=679.928 buffer_time=2.822 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 675.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=302137 bytes_read=208972 bytes_retransmit=9 bytes_invalid=0 send_seq=9300 receive_seq=9300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996765 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=42.6 mcu_temp: temp=34.3 sd_pos=83128 sysload=0.39 cputime=40.436 memavail=722524 print_time=680.443 buffer_time=2.335 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 676.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=303219 bytes_read=209410 bytes_retransmit=9 bytes_invalid=0 send_seq=9325 receive_seq=9325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996767 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=42.7 mcu_temp: temp=34.3 sd_pos=83233 sysload=0.39 cputime=40.511 memavail=722276 print_time=681.846 buffer_time=2.734 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 677.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=303715 bytes_read=209788 bytes_retransmit=9 bytes_invalid=0 send_seq=9341 receive_seq=9341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996763 heater_bed: target=60 temp=60.0 pwm=0.446 raspberry_pi: temp=42.7 mcu_temp: temp=34.2 sd_pos=83301 sysload=0.39 cputime=40.584 memavail=722024 print_time=682.710 buffer_time=2.596 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 678.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=304055 bytes_read=210137 bytes_retransmit=9 bytes_invalid=0 send_seq=9354 receive_seq=9354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996777 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=42.3 mcu_temp: temp=34.3 sd_pos=83332 sysload=0.39 cputime=40.657 memavail=721472 print_time=683.530 buffer_time=2.413 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 679.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=305264 bytes_read=210605 bytes_retransmit=9 bytes_invalid=0 send_seq=9382 receive_seq=9382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996772 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=42.9 mcu_temp: temp=34.1 sd_pos=83452 sysload=0.39 cputime=40.732 memavail=722048 print_time=685.610 buffer_time=3.491 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 680.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=305421 bytes_read=210953 bytes_retransmit=9 bytes_invalid=0 send_seq=9393 receive_seq=9392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996767 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=43.1 mcu_temp: temp=34.2 sd_pos=83452 sysload=0.36 cputime=40.802 memavail=721800 print_time=685.610 buffer_time=2.488 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 681.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=306635 bytes_read=211377 bytes_retransmit=9 bytes_invalid=0 send_seq=9420 receive_seq=9420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996765 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=43.1 mcu_temp: temp=34.3 sd_pos=83609 sysload=0.36 cputime=40.871 memavail=721836 print_time=686.254 buffer_time=2.130 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 682.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=308400 bytes_read=211880 bytes_retransmit=9 bytes_invalid=0 send_seq=9458 receive_seq=9458 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996762 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=43.1 mcu_temp: temp=34.4 sd_pos=83995 sysload=0.36 cputime=40.943 memavail=721588 print_time=687.222 buffer_time=2.098 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 683.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=310332 bytes_read=212388 bytes_retransmit=9 bytes_invalid=0 send_seq=9500 receive_seq=9500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996756 heater_bed: target=60 temp=60.0 pwm=0.443 raspberry_pi: temp=43.2 mcu_temp: temp=34.3 sd_pos=84438 sysload=0.36 cputime=41.019 memavail=721284 print_time=688.288 buffer_time=2.164 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 684.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=312598 bytes_read=212887 bytes_retransmit=9 bytes_invalid=0 send_seq=9544 receive_seq=9543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996753 heater_bed: target=60 temp=60.0 pwm=0.443 raspberry_pi: temp=43.2 mcu_temp: temp=34.4 sd_pos=84830 sysload=0.36 cputime=41.091 memavail=721996 print_time=689.425 buffer_time=2.299 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 685.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=314677 bytes_read=213430 bytes_retransmit=9 bytes_invalid=0 send_seq=9587 receive_seq=9586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996751 heater_bed: target=60 temp=60.0 pwm=0.417 raspberry_pi: temp=42.9 mcu_temp: temp=34.4 sd_pos=85456 sysload=0.41 cputime=41.167 memavail=721748 print_time=690.304 buffer_time=2.176 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 686.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=316332 bytes_read=213903 bytes_retransmit=9 bytes_invalid=0 send_seq=9623 receive_seq=9621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996759 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=42.7 mcu_temp: temp=34.3 sd_pos=85717 sysload=0.41 cputime=41.247 memavail=721876 print_time=691.154 buffer_time=2.023 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 687.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=317453 bytes_read=214327 bytes_retransmit=9 bytes_invalid=0 send_seq=9650 receive_seq=9650 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996756 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=42.7 mcu_temp: temp=34.5 sd_pos=85818 sysload=0.41 cputime=41.319 memavail=722376 print_time=692.273 buffer_time=2.142 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 688.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=318211 bytes_read=214723 bytes_retransmit=9 bytes_invalid=0 send_seq=9670 receive_seq=9669 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996761 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=42.7 mcu_temp: temp=34.4 sd_pos=85875 sysload=0.41 cputime=41.386 memavail=722636 print_time=693.162 buffer_time=2.031 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 689.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=319177 bytes_read=215140 bytes_retransmit=9 bytes_invalid=0 send_seq=9694 receive_seq=9693 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996758 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=42.7 mcu_temp: temp=34.4 sd_pos=85976 sysload=0.41 cputime=41.455 memavail=722836 print_time=694.130 buffer_time=1.997 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 690.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=320389 bytes_read=215574 bytes_retransmit=9 bytes_invalid=0 send_seq=9721 receive_seq=9720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996757 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=42.7 mcu_temp: temp=34.4 sd_pos=86103 sysload=0.38 cputime=41.523 memavail=723140 print_time=695.561 buffer_time=2.428 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 691.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=321497 bytes_read=216022 bytes_retransmit=9 bytes_invalid=0 send_seq=9748 receive_seq=9747 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996763 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=42.7 mcu_temp: temp=34.4 sd_pos=86209 sysload=0.38 cputime=41.589 memavail=723400 print_time=696.974 buffer_time=2.840 print_stall=0 extruder: target=200 temp=200.1 pwm=0.622
Stats 692.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=322038 bytes_read=216405 bytes_retransmit=9 bytes_invalid=0 send_seq=9765 receive_seq=9764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996759 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=42.0 mcu_temp: temp=34.5 sd_pos=86277 sysload=0.38 cputime=41.653 memavail=723404 print_time=697.837 buffer_time=2.701 print_stall=0 extruder: target=200 temp=200.1 pwm=0.633
Stats 693.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=322387 bytes_read=216754 bytes_retransmit=9 bytes_invalid=0 send_seq=9778 receive_seq=9777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996758 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=42.3 mcu_temp: temp=34.5 sd_pos=86308 sysload=0.38 cputime=41.724 memavail=722800 print_time=698.657 buffer_time=2.520 print_stall=0 extruder: target=200 temp=200.1 pwm=0.633
Stats 694.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=323588 bytes_read=217202 bytes_retransmit=9 bytes_invalid=0 send_seq=9805 receive_seq=9804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996755 heater_bed: target=60 temp=60.0 pwm=0.455 raspberry_pi: temp=42.3 mcu_temp: temp=34.4 sd_pos=86428 sysload=0.38 cputime=41.793 memavail=722524 print_time=700.738 buffer_time=3.599 print_stall=0 extruder: target=200 temp=200.1 pwm=0.633
Stats 695.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=323772 bytes_read=217580 bytes_retransmit=9 bytes_invalid=0 send_seq=9817 receive_seq=9817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996751 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=42.3 mcu_temp: temp=34.5 sd_pos=86428 sysload=0.35 cputime=41.857 memavail=722836 print_time=700.738 buffer_time=2.597 print_stall=0 extruder: target=200 temp=200.1 pwm=0.633
Stats 696.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=325022 bytes_read=217999 bytes_retransmit=9 bytes_invalid=0 send_seq=9845 receive_seq=9844 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996748 heater_bed: target=60 temp=60.0 pwm=0.471 raspberry_pi: temp=42.0 mcu_temp: temp=34.5 sd_pos=86589 sysload=0.35 cputime=41.924 memavail=722836 print_time=701.382 buffer_time=2.240 print_stall=0 extruder: target=200 temp=200.1 pwm=0.682
Stats 697.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=327094 bytes_read=218517 bytes_retransmit=9 bytes_invalid=0 send_seq=9886 receive_seq=9885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996748 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=42.8 mcu_temp: temp=34.4 sd_pos=86990 sysload=0.35 cputime=41.993 memavail=722588 print_time=702.545 buffer_time=2.401 print_stall=0 extruder: target=200 temp=200.1 pwm=0.682
Stats 698.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=328197 bytes_read=218950 bytes_retransmit=9 bytes_invalid=0 send_seq=9913 receive_seq=9912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996745 heater_bed: target=60 temp=60.0 pwm=0.453 raspberry_pi: temp=42.0 mcu_temp: temp=34.4 sd_pos=87194 sysload=0.35 cputime=42.058 memavail=722836 print_time=703.170 buffer_time=2.025 print_stall=0 extruder: target=200 temp=199.9 pwm=0.736
Stats 699.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=331349 bytes_read=219529 bytes_retransmit=9 bytes_invalid=0 send_seq=9972 receive_seq=9971 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996759 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=42.0 mcu_temp: temp=34.5 sd_pos=87890 sysload=0.35 cputime=42.134 memavail=722864 print_time=704.761 buffer_time=2.614 print_stall=0 extruder: target=200 temp=199.9 pwm=0.736
Stats 700.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=333037 bytes_read=220046 bytes_retransmit=9 bytes_invalid=0 send_seq=10007 receive_seq=10006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996756 heater_bed: target=60 temp=60.0 pwm=0.327 raspberry_pi: temp=41.7 mcu_temp: temp=34.5 sd_pos=88477 sysload=0.32 cputime=42.207 memavail=722364 print_time=705.345 buffer_time=2.197 print_stall=0 extruder: target=200 temp=199.9 pwm=0.736
Stats 701.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=334620 bytes_read=220495 bytes_retransmit=9 bytes_invalid=0 send_seq=10040 receive_seq=10039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996768 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=42.4 mcu_temp: temp=34.6 sd_pos=88711 sysload=0.32 cputime=42.278 memavail=722564 print_time=706.161 buffer_time=2.011 print_stall=0 extruder: target=200 temp=199.9 pwm=0.736
Stats 702.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=335702 bytes_read=220899 bytes_retransmit=9 bytes_invalid=0 send_seq=10064 receive_seq=10063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996775 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=41.7 mcu_temp: temp=34.4 sd_pos=88812 sysload=0.32 cputime=42.345 memavail=722628 print_time=707.284 buffer_time=2.132 print_stall=0 extruder: target=200 temp=199.9 pwm=0.736
Stats 703.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=336521 bytes_read=221336 bytes_retransmit=9 bytes_invalid=0 send_seq=10086 receive_seq=10085 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996780 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=42.2 mcu_temp: temp=34.6 sd_pos=88869 sysload=0.32 cputime=42.408 memavail=722584 print_time=708.175 buffer_time=2.021 print_stall=0 extruder: target=200 temp=199.9 pwm=0.676
Stats 704.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=338053 bytes_read=221795 bytes_retransmit=9 bytes_invalid=0 send_seq=10118 receive_seq=10117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996770 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=42.4 mcu_temp: temp=34.5 sd_pos=89026 sysload=0.32 cputime=42.482 memavail=722388 print_time=710.062 buffer_time=2.907 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
Stats 705.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=338672 bytes_read=222174 bytes_retransmit=9 bytes_invalid=0 send_seq=10136 receive_seq=10136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996766 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=42.3 mcu_temp: temp=34.7 sd_pos=89096 sysload=0.29 cputime=42.543 memavail=722392 print_time=710.582 buffer_time=2.426 print_stall=0 extruder: target=200 temp=200.1 pwm=0.676
Stats 706.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=339765 bytes_read=222631 bytes_retransmit=9 bytes_invalid=0 send_seq=10162 receive_seq=10162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996762 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=41.9 mcu_temp: temp=34.7 sd_pos=89202 sysload=0.29 cputime=42.609 memavail=722392 print_time=711.999 buffer_time=2.841 print_stall=0 extruder: target=200 temp=200.1 pwm=0.676
Stats 707.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=340294 bytes_read=222995 bytes_retransmit=9 bytes_invalid=0 send_seq=10178 receive_seq=10178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996776 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=41.9 mcu_temp: temp=34.7 sd_pos=89270 sysload=0.29 cputime=42.673 memavail=722392 print_time=712.863 buffer_time=2.704 print_stall=0 extruder: target=200 temp=200.2 pwm=0.639
Stats 708.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=340666 bytes_read=223369 bytes_retransmit=9 bytes_invalid=0 send_seq=10193 receive_seq=10193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996780 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.0 mcu_temp: temp=34.6 sd_pos=89301 sysload=0.29 cputime=42.736 memavail=722592 print_time=713.683 buffer_time=2.522 print_stall=0 extruder: target=200 temp=200.2 pwm=0.639
Stats 709.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=341889 bytes_read=223816 bytes_retransmit=9 bytes_invalid=0 send_seq=10221 receive_seq=10220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996774 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.3 mcu_temp: temp=34.7 sd_pos=89425 sysload=0.29 cputime=42.807 memavail=722420 print_time=715.762 buffer_time=3.600 print_stall=0 extruder: target=200 temp=200.3 pwm=0.639
Stats 710.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=342030 bytes_read=224165 bytes_retransmit=9 bytes_invalid=0 send_seq=10231 receive_seq=10230 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996770 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.3 mcu_temp: temp=34.7 sd_pos=89425 sysload=0.27 cputime=42.866 memavail=722420 print_time=715.762 buffer_time=2.598 print_stall=0 extruder: target=200 temp=200.2 pwm=0.639
Stats 711.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=343309 bytes_read=224614 bytes_retransmit=9 bytes_invalid=0 send_seq=10260 receive_seq=10260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996759 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=41.9 mcu_temp: temp=34.5 sd_pos=89587 sysload=0.27 cputime=42.929 memavail=722756 print_time=716.408 buffer_time=2.243 print_stall=0 extruder: target=200 temp=200.2 pwm=0.667
Stats 712.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=345317 bytes_read=225125 bytes_retransmit=9 bytes_invalid=0 send_seq=10300 receive_seq=10300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996756 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=41.8 mcu_temp: temp=34.7 sd_pos=89987 sysload=0.27 cputime=42.998 memavail=722760 print_time=717.543 buffer_time=2.377 print_stall=0 extruder: target=200 temp=200.1 pwm=0.667
Stats 713.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=347250 bytes_read=225550 bytes_retransmit=9 bytes_invalid=0 send_seq=10342 receive_seq=10330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=213 upcoming_bytes=0 freq=167996753 heater_bed: target=60 temp=60.0 pwm=0.491 raspberry_pi: temp=42.1 mcu_temp: temp=34.6 sd_pos=90554 sysload=0.27 cputime=43.076 memavail=723524 print_time=718.579 buffer_time=2.406 print_stall=0 extruder: target=200 temp=199.9 pwm=0.737
Stats 714.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=349377 bytes_read=226117 bytes_retransmit=9 bytes_invalid=0 send_seq=10383 receive_seq=10382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996751 heater_bed: target=60 temp=60.0 pwm=0.318 raspberry_pi: temp=42.7 mcu_temp: temp=34.7 sd_pos=90924 sysload=0.27 cputime=43.148 memavail=724060 print_time=719.692 buffer_time=2.518 print_stall=0 extruder: target=200 temp=199.9 pwm=0.737
Stats 715.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=351193 bytes_read=226629 bytes_retransmit=9 bytes_invalid=0 send_seq=10422 receive_seq=10422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996763 heater_bed: target=60 temp=59.9 pwm=0.622 raspberry_pi: temp=42.4 mcu_temp: temp=34.5 sd_pos=91500 sysload=0.25 cputime=43.218 memavail=724316 print_time=720.331 buffer_time=2.157 print_stall=0 extruder: target=200 temp=199.8 pwm=0.737
Stats 716.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=352585 bytes_read=227068 bytes_retransmit=9 bytes_invalid=0 send_seq=10453 receive_seq=10453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996771 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=42.1 mcu_temp: temp=34.6 sd_pos=91745 sysload=0.25 cputime=43.286 memavail=724316 print_time=721.241 buffer_time=2.066 print_stall=0 extruder: target=200 temp=199.8 pwm=0.737
Stats 717.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=354022 bytes_read=227527 bytes_retransmit=9 bytes_invalid=0 send_seq=10485 receive_seq=10485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996765 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=42.3 mcu_temp: temp=34.6 sd_pos=91864 sysload=0.25 cputime=43.357 memavail=724328 print_time=723.047 buffer_time=2.868 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 718.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=354618 bytes_read=227924 bytes_retransmit=9 bytes_invalid=0 send_seq=10502 receive_seq=10502 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996753 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=42.3 mcu_temp: temp=34.6 sd_pos=91934 sysload=0.25 cputime=43.423 memavail=723824 print_time=723.556 buffer_time=2.375 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 719.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=355706 bytes_read=228369 bytes_retransmit=9 bytes_invalid=0 send_seq=10529 receive_seq=10529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996753 heater_bed: target=60 temp=60.0 pwm=0.462 raspberry_pi: temp=42.1 mcu_temp: temp=34.5 sd_pos=92022 sysload=0.25 cputime=43.488 memavail=723832 print_time=724.939 buffer_time=2.758 print_stall=0 extruder: target=200 temp=200.0 pwm=0.684
Stats 720.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=356332 bytes_read=228763 bytes_retransmit=9 bytes_invalid=0 send_seq=10548 receive_seq=10548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996755 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=41.9 mcu_temp: temp=34.6 sd_pos=92091 sysload=0.23 cputime=43.551 memavail=723836 print_time=725.459 buffer_time=2.277 print_stall=0 extruder: target=200 temp=200.0 pwm=0.684
Stats 721.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=357414 bytes_read=229205 bytes_retransmit=9 bytes_invalid=0 send_seq=10574 receive_seq=10574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996752 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=42.2 mcu_temp: temp=34.7 sd_pos=92196 sysload=0.23 cputime=43.614 memavail=723584 print_time=726.880 buffer_time=2.698 print_stall=0 extruder: target=200 temp=200.0 pwm=0.668
Stats 722.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=357905 bytes_read=229559 bytes_retransmit=9 bytes_invalid=0 send_seq=10589 receive_seq=10588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996754 heater_bed: target=60 temp=60.0 pwm=0.473 raspberry_pi: temp=42.2 mcu_temp: temp=34.8 sd_pos=92264 sysload=0.23 cputime=43.679 memavail=723712 print_time=727.743 buffer_time=2.561 print_stall=0 extruder: target=200 temp=200.1 pwm=0.668
Stats 723.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=358256 bytes_read=229923 bytes_retransmit=9 bytes_invalid=0 send_seq=10602 receive_seq=10601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996753 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.0 mcu_temp: temp=34.8 sd_pos=92295 sysload=0.23 cputime=43.740 memavail=723468 print_time=728.563 buffer_time=2.380 print_stall=0 extruder: target=200 temp=200.0 pwm=0.668
Stats 724.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=359435 bytes_read=230365 bytes_retransmit=9 bytes_invalid=0 send_seq=10628 receive_seq=10627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996757 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.2 mcu_temp: temp=34.7 sd_pos=92419 sysload=0.23 cputime=43.806 memavail=722964 print_time=730.641 buffer_time=3.456 print_stall=0 extruder: target=200 temp=200.1 pwm=0.668
Stats 725.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=359587 bytes_read=230714 bytes_retransmit=9 bytes_invalid=0 send_seq=10638 receive_seq=10637 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996754 heater_bed: target=60 temp=60.0 pwm=0.499 raspberry_pi: temp=42.3 mcu_temp: temp=34.6 sd_pos=92419 sysload=0.21 cputime=43.865 memavail=722912 print_time=730.641 buffer_time=2.454 print_stall=0 extruder: target=200 temp=200.1 pwm=0.668
Stats 726.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=360883 bytes_read=231168 bytes_retransmit=9 bytes_invalid=0 send_seq=10668 receive_seq=10668 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996750 heater_bed: target=60 temp=60.0 pwm=0.476 raspberry_pi: temp=42.0 mcu_temp: temp=34.7 sd_pos=92581 sysload=0.21 cputime=43.933 memavail=722460 print_time=731.289 buffer_time=2.097 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 727.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=362934 bytes_read=231690 bytes_retransmit=9 bytes_invalid=0 send_seq=10710 receive_seq=10710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996761 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=42.0 mcu_temp: temp=35.0 sd_pos=92985 sysload=0.21 cputime=44.005 memavail=722712 print_time=732.408 buffer_time=2.216 print_stall=0 extruder: target=200 temp=200.1 pwm=0.661
Stats 728.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=365025 bytes_read=232179 bytes_retransmit=9 bytes_invalid=0 send_seq=10752 receive_seq=10751 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996757 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=42.2 mcu_temp: temp=34.7 sd_pos=93551 sysload=0.21 cputime=44.074 memavail=722160 print_time=733.418 buffer_time=2.225 print_stall=0 extruder: target=200 temp=200.0 pwm=0.661
Stats 729.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=366529 bytes_read=232658 bytes_retransmit=9 bytes_invalid=0 send_seq=10784 receive_seq=10784 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996757 heater_bed: target=60 temp=60.0 pwm=0.441 raspberry_pi: temp=42.3 mcu_temp: temp=34.8 sd_pos=93918 sysload=0.21 cputime=44.145 memavail=721968 print_time=734.247 buffer_time=2.052 print_stall=0 extruder: target=200 temp=200.0 pwm=0.730
Stats 730.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=369019 bytes_read=233210 bytes_retransmit=9 bytes_invalid=0 send_seq=10833 receive_seq=10832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996760 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=42.3 mcu_temp: temp=34.6 sd_pos=94685 sysload=0.19 cputime=44.219 memavail=722220 print_time=735.393 buffer_time=2.197 print_stall=0 extruder: target=200 temp=199.9 pwm=0.730
Stats 731.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=370350 bytes_read=233639 bytes_retransmit=9 bytes_invalid=0 send_seq=10862 receive_seq=10861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996754 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=42.5 mcu_temp: temp=34.7 sd_pos=94776 sysload=0.19 cputime=44.287 memavail=721976 print_time=736.483 buffer_time=2.285 print_stall=0 extruder: target=200 temp=199.8 pwm=0.730
Stats 732.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=371475 bytes_read=234078 bytes_retransmit=9 bytes_invalid=0 send_seq=10889 receive_seq=10889 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996750 heater_bed: target=60 temp=60.0 pwm=0.323 raspberry_pi: temp=42.4 mcu_temp: temp=34.8 sd_pos=94864 sysload=0.19 cputime=44.351 memavail=722276 print_time=737.830 buffer_time=2.630 print_stall=0 extruder: target=200 temp=199.9 pwm=0.672
Stats 733.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=372088 bytes_read=234475 bytes_retransmit=9 bytes_invalid=0 send_seq=10907 receive_seq=10906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996752 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=42.1 mcu_temp: temp=34.7 sd_pos=94934 sysload=0.19 cputime=44.415 memavail=722040 print_time=738.339 buffer_time=2.134 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 734.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=373176 bytes_read=234914 bytes_retransmit=9 bytes_invalid=0 send_seq=10934 receive_seq=10934 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996749 heater_bed: target=60 temp=60.0 pwm=0.503 raspberry_pi: temp=42.1 mcu_temp: temp=34.8 sd_pos=95021 sysload=0.19 cputime=44.486 memavail=721548 print_time=739.724 buffer_time=2.519 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 735.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=373822 bytes_read=235303 bytes_retransmit=9 bytes_invalid=0 send_seq=10953 receive_seq=10952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996749 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.0 mcu_temp: temp=34.7 sd_pos=95090 sysload=0.18 cputime=44.546 memavail=721548 print_time=740.246 buffer_time=2.040 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 736.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=374924 bytes_read=235755 bytes_retransmit=9 bytes_invalid=0 send_seq=10980 receive_seq=10980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996746 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=41.9 mcu_temp: temp=34.7 sd_pos=95196 sysload=0.18 cputime=44.610 memavail=721316 print_time=741.669 buffer_time=2.462 print_stall=0 extruder: target=200 temp=200.0 pwm=0.683
Stats 737.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=375420 bytes_read=236114 bytes_retransmit=9 bytes_invalid=0 send_seq=10996 receive_seq=10995 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996742 heater_bed: target=60 temp=60.0 pwm=0.529 raspberry_pi: temp=42.3 mcu_temp: temp=34.8 sd_pos=95264 sysload=0.18 cputime=44.668 memavail=721320 print_time=742.532 buffer_time=2.324 print_stall=0 extruder: target=200 temp=200.1 pwm=0.683
Stats 738.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=375770 bytes_read=236492 bytes_retransmit=9 bytes_invalid=0 send_seq=11010 receive_seq=11009 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996739 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=42.2 mcu_temp: temp=34.8 sd_pos=95295 sysload=0.18 cputime=44.728 memavail=721584 print_time=743.352 buffer_time=2.142 print_stall=0 extruder: target=200 temp=200.1 pwm=0.683
Stats 739.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=376965 bytes_read=236934 bytes_retransmit=9 bytes_invalid=0 send_seq=11037 receive_seq=11037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996742 heater_bed: target=60 temp=60.0 pwm=0.471 raspberry_pi: temp=42.4 mcu_temp: temp=34.8 sd_pos=95419 sysload=0.18 cputime=44.791 memavail=721620 print_time=745.429 buffer_time=3.218 print_stall=0 extruder: target=200 temp=200.1 pwm=0.683
Stats 740.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=377138 bytes_read=237278 bytes_retransmit=9 bytes_invalid=0 send_seq=11049 receive_seq=11049 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996738 heater_bed: target=60 temp=60.0 pwm=0.486 raspberry_pi: temp=42.5 mcu_temp: temp=35.0 sd_pos=95419 sysload=0.16 cputime=44.848 memavail=721832 print_time=745.429 buffer_time=2.217 print_stall=0 extruder: target=200 temp=200.1 pwm=0.683
Stats 741.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=379358 bytes_read=237811 bytes_retransmit=9 bytes_invalid=0 send_seq=11093 receive_seq=11093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996735 heater_bed: target=60 temp=60.0 pwm=0.489 raspberry_pi: temp=42.8 mcu_temp: temp=34.9 sd_pos=95786 sysload=0.16 cputime=44.916 memavail=721896 print_time=746.781 buffer_time=2.568 print_stall=0 extruder: target=200 temp=200.1 pwm=0.660
Stats 742.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=381423 bytes_read=238319 bytes_retransmit=9 bytes_invalid=0 send_seq=11136 receive_seq=11135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996741 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=42.3 mcu_temp: temp=34.9 sd_pos=96155 sysload=0.16 cputime=44.982 memavail=722412 print_time=747.863 buffer_time=2.649 print_stall=0 extruder: target=200 temp=200.1 pwm=0.660
Stats 743.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=383186 bytes_read=238793 bytes_retransmit=9 bytes_invalid=0 send_seq=11173 receive_seq=11173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996740 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=42.0 mcu_temp: temp=34.8 sd_pos=96707 sysload=0.16 cputime=45.050 memavail=722428 print_time=748.621 buffer_time=2.405 print_stall=0 extruder: target=200 temp=200.1 pwm=0.660
Stats 744.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=384244 bytes_read=239231 bytes_retransmit=9 bytes_invalid=0 send_seq=11199 receive_seq=11198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996737 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=42.5 mcu_temp: temp=34.8 sd_pos=96914 sysload=0.16 cputime=45.116 memavail=721440 print_time=749.291 buffer_time=2.075 print_stall=0 extruder: target=200 temp=200.1 pwm=0.660
Stats 745.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=386811 bytes_read=239794 bytes_retransmit=9 bytes_invalid=0 send_seq=11250 receive_seq=11248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996738 heater_bed: target=60 temp=60.0 pwm=0.518 raspberry_pi: temp=42.9 mcu_temp: temp=35.0 sd_pos=97671 sysload=0.15 cputime=45.192 memavail=721692 print_time=750.530 buffer_time=2.311 print_stall=0 extruder: target=200 temp=200.0 pwm=0.700
Stats 746.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=387909 bytes_read=240218 bytes_retransmit=9 bytes_invalid=0 send_seq=11276 receive_seq=11276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996738 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=42.9 mcu_temp: temp=34.9 sd_pos=97772 sysload=0.15 cputime=45.256 memavail=721944 print_time=751.657 buffer_time=2.437 print_stall=0 extruder: target=200 temp=200.0 pwm=0.700
Stats 747.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=388712 bytes_read=240646 bytes_retransmit=9 bytes_invalid=0 send_seq=11299 receive_seq=11299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996727 heater_bed: target=60 temp=60.0 pwm=0.292 raspberry_pi: temp=43.0 mcu_temp: temp=34.9 sd_pos=97829 sysload=0.15 cputime=45.320 memavail=722160 print_time=752.553 buffer_time=2.332 print_stall=0 extruder: target=200 temp=200.0 pwm=0.700
Stats 748.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=389664 bytes_read=241059 bytes_retransmit=9 bytes_invalid=0 send_seq=11323 receive_seq=11322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996739 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=42.6 mcu_temp: temp=34.9 sd_pos=97930 sysload=0.15 cputime=45.385 memavail=722216 print_time=753.528 buffer_time=2.307 print_stall=0 extruder: target=200 temp=200.0 pwm=0.700
Stats 749.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=390421 bytes_read=241464 bytes_retransmit=9 bytes_invalid=0 send_seq=11343 receive_seq=11343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996745 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=42.9 mcu_temp: temp=34.9 sd_pos=97987 sysload=0.15 cputime=45.447 memavail=722492 print_time=754.449 buffer_time=2.227 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 750.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=391368 bytes_read=241892 bytes_retransmit=9 bytes_invalid=0 send_seq=11367 receive_seq=11366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996745 heater_bed: target=60 temp=60.0 pwm=0.493 raspberry_pi: temp=42.4 mcu_temp: temp=34.8 sd_pos=98086 sysload=0.14 cputime=45.510 memavail=722492 print_time=755.450 buffer_time=2.226 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 751.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=392141 bytes_read=242295 bytes_retransmit=9 bytes_invalid=0 send_seq=11388 receive_seq=11387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996743 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=42.7 mcu_temp: temp=35.0 sd_pos=98161 sysload=0.14 cputime=45.570 memavail=722496 print_time=756.396 buffer_time=2.170 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 752.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=392648 bytes_read=242659 bytes_retransmit=9 bytes_invalid=0 send_seq=11404 receive_seq=11403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996745 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=42.5 mcu_temp: temp=34.9 sd_pos=98229 sysload=0.14 cputime=45.629 memavail=722760 print_time=757.260 buffer_time=2.032 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 753.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=394025 bytes_read=243117 bytes_retransmit=9 bytes_invalid=0 send_seq=11433 receive_seq=11432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996752 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=42.5 mcu_temp: temp=34.8 sd_pos=98380 sysload=0.14 cputime=45.695 memavail=722584 print_time=760.156 buffer_time=3.927 print_stall=0 extruder: target=200 temp=200.1 pwm=0.649
Stats 754.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=394214 bytes_read=243500 bytes_retransmit=9 bytes_invalid=0 send_seq=11446 receive_seq=11446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996748 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=42.7 mcu_temp: temp=34.9 sd_pos=98380 sysload=0.14 cputime=45.759 memavail=722392 print_time=760.156 buffer_time=2.925 print_stall=0 extruder: target=200 temp=200.0 pwm=0.707
Stats 755.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=395498 bytes_read=243929 bytes_retransmit=9 bytes_invalid=0 send_seq=11476 receive_seq=11475 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996743 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=42.9 mcu_temp: temp=34.8 sd_pos=98573 sysload=0.12 cputime=45.820 memavail=722644 print_time=760.810 buffer_time=2.578 print_stall=0 extruder: target=200 temp=200.0 pwm=0.707
Stats 756.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=396573 bytes_read=244367 bytes_retransmit=9 bytes_invalid=0 send_seq=11501 receive_seq=11500 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996742 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=42.9 mcu_temp: temp=35.0 sd_pos=98776 sysload=0.12 cputime=45.882 memavail=722772 print_time=761.501 buffer_time=2.268 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 757.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=398615 bytes_read=244865 bytes_retransmit=9 bytes_invalid=0 send_seq=11541 receive_seq=11540 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996746 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=42.6 mcu_temp: temp=35.0 sd_pos=99177 sysload=0.12 cputime=45.947 memavail=722532 print_time=762.578 buffer_time=2.344 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 758.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=400383 bytes_read=245339 bytes_retransmit=9 bytes_invalid=0 send_seq=11578 receive_seq=11578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996742 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=42.5 mcu_temp: temp=35.0 sd_pos=99731 sysload=0.12 cputime=46.014 memavail=722784 print_time=763.315 buffer_time=2.079 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 759.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=402124 bytes_read=245827 bytes_retransmit=9 bytes_invalid=0 send_seq=11614 receive_seq=11613 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996745 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=42.9 mcu_temp: temp=34.9 sd_pos=100327 sysload=0.12 cputime=46.084 memavail=722628 print_time=764.281 buffer_time=2.044 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 760.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=404130 bytes_read=246345 bytes_retransmit=9 bytes_invalid=0 send_seq=11655 receive_seq=11654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996745 heater_bed: target=60 temp=60.0 pwm=0.470 raspberry_pi: temp=42.8 mcu_temp: temp=35.1 sd_pos=100715 sysload=0.11 cputime=46.153 memavail=722892 print_time=765.416 buffer_time=2.177 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 761.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=404986 bytes_read=246744 bytes_retransmit=9 bytes_invalid=0 send_seq=11678 receive_seq=11677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996739 heater_bed: target=60 temp=60.0 pwm=0.481 raspberry_pi: temp=43.2 mcu_temp: temp=35.0 sd_pos=100776 sysload=0.11 cputime=46.216 memavail=722892 print_time=766.303 buffer_time=2.064 print_stall=0 extruder: target=200 temp=200.0 pwm=0.647
Stats 762.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=406258 bytes_read=247197 bytes_retransmit=9 bytes_invalid=0 send_seq=11706 receive_seq=11705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996739 heater_bed: target=60 temp=60.0 pwm=0.328 raspberry_pi: temp=42.4 mcu_temp: temp=35.0 sd_pos=100900 sysload=0.11 cputime=46.283 memavail=722892 print_time=767.666 buffer_time=2.424 print_stall=0 extruder: target=200 temp=200.0 pwm=0.647
Stats 763.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=407387 bytes_read=247625 bytes_retransmit=9 bytes_invalid=0 send_seq=11732 receive_seq=11731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996735 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=42.6 mcu_temp: temp=35.1 sd_pos=100988 sysload=0.11 cputime=46.346 memavail=722896 print_time=769.008 buffer_time=2.766 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 764.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=408022 bytes_read=247990 bytes_retransmit=9 bytes_invalid=0 send_seq=11750 receive_seq=11749 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996741 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=42.9 mcu_temp: temp=35.0 sd_pos=101056 sysload=0.11 cputime=46.410 memavail=722396 print_time=769.515 buffer_time=2.271 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 765.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=409187 bytes_read=248455 bytes_retransmit=9 bytes_invalid=0 send_seq=11779 receive_seq=11778 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996750 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=42.4 mcu_temp: temp=35.0 sd_pos=101162 sysload=0.11 cputime=46.474 memavail=722428 print_time=770.894 buffer_time=2.648 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 766.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=409694 bytes_read=248838 bytes_retransmit=9 bytes_invalid=0 send_seq=11795 receive_seq=11795 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996745 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.4 mcu_temp: temp=35.0 sd_pos=101228 sysload=0.11 cputime=46.535 memavail=722432 print_time=771.757 buffer_time=2.509 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 767.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=410034 bytes_read=249182 bytes_retransmit=9 bytes_invalid=0 send_seq=11808 receive_seq=11807 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996741 heater_bed: target=60 temp=60.0 pwm=0.468 raspberry_pi: temp=42.1 mcu_temp: temp=34.9 sd_pos=101259 sysload=0.11 cputime=46.593 memavail=722180 print_time=772.577 buffer_time=2.328 print_stall=0 extruder: target=200 temp=200.0 pwm=0.648
Stats 768.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=411231 bytes_read=249649 bytes_retransmit=9 bytes_invalid=0 send_seq=11835 receive_seq=11835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996737 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=42.1 mcu_temp: temp=35.2 sd_pos=101381 sysload=0.11 cputime=46.656 memavail=722184 print_time=774.653 buffer_time=3.401 print_stall=0 extruder: target=200 temp=200.0 pwm=0.701
Stats 769.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=411399 bytes_read=249983 bytes_retransmit=9 bytes_invalid=0 send_seq=11846 receive_seq=11845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996733 heater_bed: target=60 temp=60.0 pwm=0.296 raspberry_pi: temp=42.0 mcu_temp: temp=35.0 sd_pos=101381 sysload=0.11 cputime=46.719 memavail=722192 print_time=774.653 buffer_time=2.401 print_stall=0 extruder: target=200 temp=199.9 pwm=0.701
Stats 770.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=412694 bytes_read=250427 bytes_retransmit=9 bytes_invalid=0 send_seq=11875 receive_seq=11874 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996734 heater_bed: target=60 temp=60.0 pwm=0.491 raspberry_pi: temp=42.1 mcu_temp: temp=35.0 sd_pos=101574 sysload=0.18 cputime=46.782 memavail=721940 print_time=775.311 buffer_time=2.057 print_stall=0 extruder: target=200 temp=199.9 pwm=0.701
Stats 771.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=414612 bytes_read=250944 bytes_retransmit=9 bytes_invalid=0 send_seq=11913 receive_seq=11912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996733 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=42.4 mcu_temp: temp=35.0 sd_pos=101975 sysload=0.18 cputime=46.849 memavail=721224 print_time=776.399 buffer_time=2.143 print_stall=0 extruder: target=200 temp=199.8 pwm=0.701
Stats 772.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=416689 bytes_read=251438 bytes_retransmit=9 bytes_invalid=0 send_seq=11954 receive_seq=11954 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996730 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=42.3 mcu_temp: temp=35.1 sd_pos=102598 sysload=0.18 cputime=46.919 memavail=721228 print_time=777.402 buffer_time=2.145 print_stall=0 extruder: target=200 temp=199.7 pwm=0.701
Stats 773.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=418528 bytes_read=251932 bytes_retransmit=9 bytes_invalid=0 send_seq=11993 receive_seq=11993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=20 upcoming_bytes=0 freq=167996726 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=42.1 mcu_temp: temp=35.0 sd_pos=103000 sysload=0.18 cputime=46.987 memavail=720976 print_time=778.474 buffer_time=2.215 print_stall=0 extruder: target=200 temp=199.6 pwm=0.738
Stats 775.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=420647 bytes_read=252454 bytes_retransmit=9 bytes_invalid=0 send_seq=12036 receive_seq=12035 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996722 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=42.3 mcu_temp: temp=35.1 sd_pos=103468 sysload=0.18 cputime=47.059 memavail=721540 print_time=779.538 buffer_time=2.278 print_stall=0 extruder: target=200 temp=199.6 pwm=0.738
Stats 776.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=422548 bytes_read=252948 bytes_retransmit=9 bytes_invalid=0 send_seq=12075 receive_seq=12074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996718 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=42.3 mcu_temp: temp=35.0 sd_pos=103682 sysload=0.24 cputime=47.123 memavail=721540 print_time=780.581 buffer_time=2.320 print_stall=0 extruder: target=200 temp=199.6 pwm=0.738
Stats 777.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=425254 bytes_read=253512 bytes_retransmit=9 bytes_invalid=0 send_seq=12128 receive_seq=12127 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996714 heater_bed: target=60 temp=60.0 pwm=0.453 raspberry_pi: temp=42.7 mcu_temp: temp=35.2 sd_pos=104167 sysload=0.24 cputime=47.190 memavail=721416 print_time=781.779 buffer_time=2.516 print_stall=0 extruder: target=200 temp=199.8 pwm=0.674
Stats 778.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=426783 bytes_read=253984 bytes_retransmit=9 bytes_invalid=0 send_seq=12160 receive_seq=12159 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996709 heater_bed: target=60 temp=60.0 pwm=0.453 raspberry_pi: temp=42.0 mcu_temp: temp=35.2 sd_pos=104429 sysload=0.24 cputime=47.252 memavail=721448 print_time=782.347 buffer_time=2.084 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 779.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=428683 bytes_read=254474 bytes_retransmit=9 bytes_invalid=0 send_seq=12199 receive_seq=12198 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996709 heater_bed: target=60 temp=60.0 pwm=0.324 raspberry_pi: temp=42.7 mcu_temp: temp=35.1 sd_pos=104672 sysload=0.24 cputime=47.317 memavail=721460 print_time=783.381 buffer_time=2.116 print_stall=0 extruder: target=200 temp=200.0 pwm=0.674
Stats 780.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=431376 bytes_read=255038 bytes_retransmit=9 bytes_invalid=0 send_seq=12252 receive_seq=12251 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996714 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=42.3 mcu_temp: temp=35.2 sd_pos=105123 sysload=0.24 cputime=47.383 memavail=721244 print_time=784.611 buffer_time=2.346 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 781.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=433772 bytes_read=255600 bytes_retransmit=9 bytes_invalid=0 send_seq=12298 receive_seq=12298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996736 heater_bed: target=60 temp=60.0 pwm=0.470 raspberry_pi: temp=42.5 mcu_temp: temp=35.2 sd_pos=105542 sysload=0.30 cputime=47.452 memavail=721252 print_time=785.550 buffer_time=2.283 print_stall=0 extruder: target=200 temp=200.2 pwm=0.618
Stats 782.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=435375 bytes_read=256049 bytes_retransmit=9 bytes_invalid=0 send_seq=12332 receive_seq=12331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996733 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=42.1 mcu_temp: temp=35.2 sd_pos=105796 sysload=0.30 cputime=47.519 memavail=721012 print_time=786.664 buffer_time=2.396 print_stall=0 extruder: target=200 temp=200.2 pwm=0.618
Stats 783.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=436509 bytes_read=256483 bytes_retransmit=9 bytes_invalid=0 send_seq=12359 receive_seq=12358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996737 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=42.3 mcu_temp: temp=35.2 sd_pos=105884 sysload=0.30 cputime=47.583 memavail=720272 print_time=787.970 buffer_time=2.701 print_stall=0 extruder: target=200 temp=200.2 pwm=0.687
Stats 784.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=437148 bytes_read=256885 bytes_retransmit=9 bytes_invalid=0 send_seq=12377 receive_seq=12376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996757 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=42.3 mcu_temp: temp=35.2 sd_pos=105952 sysload=0.30 cputime=47.643 memavail=720316 print_time=788.465 buffer_time=2.194 print_stall=0 extruder: target=200 temp=200.1 pwm=0.687
Stats 785.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=438251 bytes_read=257314 bytes_retransmit=9 bytes_invalid=0 send_seq=12402 receive_seq=12402 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996756 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=42.2 mcu_temp: temp=35.2 sd_pos=106040 sysload=0.30 cputime=47.707 memavail=720644 print_time=789.808 buffer_time=2.535 print_stall=0 extruder: target=200 temp=200.1 pwm=0.687
Stats 786.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=438870 bytes_read=257698 bytes_retransmit=9 bytes_invalid=0 send_seq=12420 receive_seq=12419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996750 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=42.3 mcu_temp: temp=35.2 sd_pos=106108 sysload=0.36 cputime=47.766 memavail=720896 print_time=790.314 buffer_time=2.040 print_stall=0 extruder: target=200 temp=200.1 pwm=0.687
Stats 787.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=439998 bytes_read=258145 bytes_retransmit=9 bytes_invalid=0 send_seq=12446 receive_seq=12446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996746 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=42.4 mcu_temp: temp=35.2 sd_pos=106214 sysload=0.36 cputime=47.828 memavail=720644 print_time=791.693 buffer_time=2.417 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 788.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=440528 bytes_read=258509 bytes_retransmit=9 bytes_invalid=0 send_seq=12463 receive_seq=12462 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996739 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=42.4 mcu_temp: temp=35.1 sd_pos=106282 sysload=0.36 cputime=47.888 memavail=720644 print_time=792.556 buffer_time=2.279 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 789.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=440902 bytes_read=258888 bytes_retransmit=9 bytes_invalid=0 send_seq=12478 receive_seq=12478 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996735 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=42.0 mcu_temp: temp=35.2 sd_pos=106313 sysload=0.36 cputime=47.948 memavail=720644 print_time=793.376 buffer_time=2.097 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 790.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=442112 bytes_read=259334 bytes_retransmit=9 bytes_invalid=0 send_seq=12507 receive_seq=12506 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996732 heater_bed: target=60 temp=60.0 pwm=0.499 raspberry_pi: temp=42.1 mcu_temp: temp=35.2 sd_pos=106437 sysload=0.36 cputime=48.012 memavail=720452 print_time=795.452 buffer_time=3.171 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 791.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=442291 bytes_read=259683 bytes_retransmit=9 bytes_invalid=0 send_seq=12518 receive_seq=12518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996729 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.0 mcu_temp: temp=35.2 sd_pos=106437 sysload=0.49 cputime=48.071 memavail=720456 print_time=795.452 buffer_time=2.169 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 792.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=444533 bytes_read=260195 bytes_retransmit=9 bytes_invalid=0 send_seq=12562 receive_seq=12561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996724 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=42.5 mcu_temp: temp=35.2 sd_pos=106866 sysload=0.49 cputime=48.141 memavail=720460 print_time=796.814 buffer_time=2.529 print_stall=0 extruder: target=200 temp=200.0 pwm=0.682
Stats 793.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=446634 bytes_read=260722 bytes_retransmit=9 bytes_invalid=0 send_seq=12605 receive_seq=12604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996721 heater_bed: target=60 temp=60.0 pwm=0.447 raspberry_pi: temp=42.3 mcu_temp: temp=35.3 sd_pos=107265 sysload=0.49 cputime=48.211 memavail=719956 print_time=797.915 buffer_time=2.628 print_stall=0 extruder: target=200 temp=199.9 pwm=0.682
Stats 794.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=448478 bytes_read=261201 bytes_retransmit=9 bytes_invalid=0 send_seq=12643 receive_seq=12643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996718 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=42.3 mcu_temp: temp=35.2 sd_pos=107791 sysload=0.49 cputime=48.277 memavail=719956 print_time=798.900 buffer_time=2.612 print_stall=0 extruder: target=200 temp=200.0 pwm=0.682
Stats 795.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=449441 bytes_read=261610 bytes_retransmit=9 bytes_invalid=0 send_seq=12666 receive_seq=12665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996721 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=42.4 mcu_temp: temp=35.2 sd_pos=108189 sysload=0.49 cputime=48.345 memavail=719720 print_time=799.362 buffer_time=2.071 print_stall=0 extruder: target=200 temp=199.9 pwm=0.682
Stats 796.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=451898 bytes_read=262192 bytes_retransmit=9 bytes_invalid=0 send_seq=12717 receive_seq=12716 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996722 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=42.4 mcu_temp: temp=35.1 sd_pos=108526 sysload=0.53 cputime=48.414 memavail=719780 print_time=800.610 buffer_time=2.319 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 797.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=453296 bytes_read=262626 bytes_retransmit=9 bytes_invalid=0 send_seq=12747 receive_seq=12746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996720 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=42.5 mcu_temp: temp=35.2 sd_pos=108709 sysload=0.53 cputime=48.479 memavail=719288 print_time=801.489 buffer_time=2.196 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 798.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=455923 bytes_read=263185 bytes_retransmit=9 bytes_invalid=0 send_seq=12799 receive_seq=12798 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996718 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=42.7 mcu_temp: temp=35.2 sd_pos=109113 sysload=0.53 cputime=48.547 memavail=719292 print_time=802.857 buffer_time=2.563 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 799.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=457472 bytes_read=263667 bytes_retransmit=9 bytes_invalid=0 send_seq=12833 receive_seq=12832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996719 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=42.8 mcu_temp: temp=35.0 sd_pos=109381 sysload=0.53 cputime=48.611 memavail=718736 print_time=803.443 buffer_time=2.148 print_stall=0 extruder: target=200 temp=200.1 pwm=0.630
Stats 800.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=459730 bytes_read=264191 bytes_retransmit=9 bytes_invalid=0 send_seq=12877 receive_seq=12877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996724 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=42.4 mcu_temp: temp=35.3 sd_pos=109720 sysload=0.53 cputime=48.681 memavail=718752 print_time=804.479 buffer_time=2.176 print_stall=0 extruder: target=200 temp=200.1 pwm=0.630
Stats 801.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=462132 bytes_read=264735 bytes_retransmit=9 bytes_invalid=0 send_seq=12927 receive_seq=12926 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996719 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=42.4 mcu_temp: temp=35.3 sd_pos=110150 sysload=0.57 cputime=48.755 memavail=718312 print_time=805.781 buffer_time=2.478 print_stall=0 extruder: target=200 temp=200.1 pwm=0.697
Stats 802.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=463630 bytes_read=265217 bytes_retransmit=9 bytes_invalid=0 send_seq=12961 receive_seq=12960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996715 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=43.0 mcu_temp: temp=35.2 sd_pos=110417 sysload=0.57 cputime=48.817 memavail=718272 print_time=806.355 buffer_time=2.051 print_stall=0 extruder: target=200 temp=200.0 pwm=0.697
Stats 803.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=465868 bytes_read=265726 bytes_retransmit=9 bytes_invalid=0 send_seq=13005 receive_seq=13005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996710 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=42.5 mcu_temp: temp=35.2 sd_pos=110756 sysload=0.57 cputime=48.883 memavail=718336 print_time=807.431 buffer_time=2.127 print_stall=0 extruder: target=200 temp=200.0 pwm=0.697
Stats 804.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=468280 bytes_read=266270 bytes_retransmit=9 bytes_invalid=0 send_seq=13054 receive_seq=13054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=42.3 mcu_temp: temp=35.4 sd_pos=111182 sysload=0.57 cputime=48.950 memavail=718084 print_time=808.738 buffer_time=2.433 print_stall=0 extruder: target=200 temp=200.0 pwm=0.697
Stats 805.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=469758 bytes_read=266757 bytes_retransmit=9 bytes_invalid=0 send_seq=13087 receive_seq=13086 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=42.7 mcu_temp: temp=35.4 sd_pos=111441 sysload=0.57 cputime=49.017 memavail=718368 print_time=809.312 buffer_time=2.006 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 806.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=472162 bytes_read=267266 bytes_retransmit=9 bytes_invalid=0 send_seq=13133 receive_seq=13131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996699 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=42.8 mcu_temp: temp=35.1 sd_pos=111883 sysload=0.68 cputime=49.091 memavail=718636 print_time=810.492 buffer_time=2.180 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 807.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=472955 bytes_read=267689 bytes_retransmit=9 bytes_invalid=0 send_seq=13153 receive_seq=13153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996705 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=42.6 mcu_temp: temp=35.3 sd_pos=111945 sysload=0.68 cputime=49.153 memavail=718636 print_time=811.379 buffer_time=2.067 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 808.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=474227 bytes_read=268132 bytes_retransmit=9 bytes_invalid=0 send_seq=13182 receive_seq=13182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=42.6 mcu_temp: temp=35.3 sd_pos=112070 sysload=0.68 cputime=49.219 memavail=719088 print_time=812.742 buffer_time=2.429 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 809.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=475352 bytes_read=268551 bytes_retransmit=9 bytes_invalid=0 send_seq=13209 receive_seq=13209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=42.7 mcu_temp: temp=35.4 sd_pos=112158 sysload=0.68 cputime=49.282 memavail=719644 print_time=814.084 buffer_time=2.770 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 810.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=476001 bytes_read=268979 bytes_retransmit=9 bytes_invalid=0 send_seq=13229 receive_seq=13229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.478 raspberry_pi: temp=42.8 mcu_temp: temp=35.5 sd_pos=112226 sysload=0.68 cputime=49.344 memavail=719592 print_time=814.591 buffer_time=2.277 print_stall=0 extruder: target=200 temp=200.1 pwm=0.676
Stats 811.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=477152 bytes_read=269417 bytes_retransmit=9 bytes_invalid=0 send_seq=13257 receive_seq=13257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996710 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=42.8 mcu_temp: temp=35.2 sd_pos=112332 sysload=0.63 cputime=49.409 memavail=719904 print_time=815.970 buffer_time=2.655 print_stall=0 extruder: target=200 temp=200.1 pwm=0.676
Stats 812.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=477664 bytes_read=269786 bytes_retransmit=9 bytes_invalid=0 send_seq=13274 receive_seq=13274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996708 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=43.2 mcu_temp: temp=35.2 sd_pos=112400 sysload=0.63 cputime=49.470 memavail=719652 print_time=816.833 buffer_time=2.518 print_stall=0 extruder: target=200 temp=200.1 pwm=0.676
Stats 813.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=478052 bytes_read=270179 bytes_retransmit=9 bytes_invalid=0 send_seq=13290 receive_seq=13290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996710 heater_bed: target=60 temp=60.0 pwm=0.485 raspberry_pi: temp=42.4 mcu_temp: temp=35.3 sd_pos=112431 sysload=0.63 cputime=49.530 memavail=719960 print_time=817.653 buffer_time=2.337 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
Stats 814.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=479275 bytes_read=270617 bytes_retransmit=9 bytes_invalid=0 send_seq=13318 receive_seq=13318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996707 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.4 mcu_temp: temp=35.3 sd_pos=112555 sysload=0.63 cputime=49.591 memavail=720216 print_time=819.729 buffer_time=3.412 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 815.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=479416 bytes_read=270966 bytes_retransmit=9 bytes_invalid=0 send_seq=13328 receive_seq=13328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996704 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.1 mcu_temp: temp=35.4 sd_pos=112555 sysload=0.63 cputime=49.646 memavail=720008 print_time=819.729 buffer_time=2.410 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 816.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=480688 bytes_read=271404 bytes_retransmit=9 bytes_invalid=0 send_seq=13356 receive_seq=13355 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996701 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.8 mcu_temp: temp=35.5 sd_pos=112747 sysload=0.58 cputime=49.707 memavail=719260 print_time=820.395 buffer_time=2.076 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 817.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=482567 bytes_read=271894 bytes_retransmit=9 bytes_invalid=0 send_seq=13395 receive_seq=13395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996704 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=43.3 mcu_temp: temp=35.4 sd_pos=113148 sysload=0.58 cputime=49.772 memavail=719392 print_time=821.474 buffer_time=2.155 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 818.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=484637 bytes_read=272388 bytes_retransmit=9 bytes_invalid=0 send_seq=13438 receive_seq=13437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996707 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.7 mcu_temp: temp=35.5 sd_pos=113813 sysload=0.58 cputime=49.843 memavail=719144 print_time=822.502 buffer_time=2.180 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 819.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=486504 bytes_read=272896 bytes_retransmit=9 bytes_invalid=0 send_seq=13476 receive_seq=13476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996709 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.2 mcu_temp: temp=35.4 sd_pos=114314 sysload=0.58 cputime=49.911 memavail=718652 print_time=823.626 buffer_time=2.303 print_stall=0 extruder: target=200 temp=199.9 pwm=0.743
Stats 820.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=488914 bytes_read=273454 bytes_retransmit=9 bytes_invalid=0 send_seq=13525 receive_seq=13525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996705 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=42.8 mcu_temp: temp=35.4 sd_pos=114655 sysload=0.58 cputime=49.982 memavail=718400 print_time=824.871 buffer_time=2.547 print_stall=0 extruder: target=200 temp=199.9 pwm=0.680
Stats 821.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=490332 bytes_read=273898 bytes_retransmit=9 bytes_invalid=0 send_seq=13557 receive_seq=13557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996702 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=42.9 mcu_temp: temp=35.4 sd_pos=114838 sysload=0.53 cputime=50.046 memavail=718160 print_time=825.754 buffer_time=2.428 print_stall=0 extruder: target=200 temp=199.9 pwm=0.680
Stats 822.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=492208 bytes_read=274421 bytes_retransmit=9 bytes_invalid=0 send_seq=13599 receive_seq=13599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996700 heater_bed: target=60 temp=60.0 pwm=0.479 raspberry_pi: temp=43.0 mcu_temp: temp=35.6 sd_pos=115165 sysload=0.53 cputime=50.112 memavail=718432 print_time=826.522 buffer_time=2.195 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 823.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=494951 bytes_read=274984 bytes_retransmit=9 bytes_invalid=0 send_seq=13652 receive_seq=13652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996699 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.1 mcu_temp: temp=35.4 sd_pos=115638 sysload=0.53 cputime=50.184 memavail=718180 print_time=827.671 buffer_time=2.344 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 824.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=496727 bytes_read=275443 bytes_retransmit=9 bytes_invalid=0 send_seq=13688 receive_seq=13687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996701 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.7 mcu_temp: temp=35.6 sd_pos=115870 sysload=0.53 cputime=50.250 memavail=718432 print_time=828.889 buffer_time=2.560 print_stall=0 extruder: target=200 temp=200.1 pwm=0.667
Stats 825.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=498352 bytes_read=275936 bytes_retransmit=9 bytes_invalid=0 send_seq=13724 receive_seq=13723 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=42.8 mcu_temp: temp=35.4 sd_pos=116136 sysload=0.53 cputime=50.314 memavail=717676 print_time=829.383 buffer_time=2.054 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 826.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=501130 bytes_read=276524 bytes_retransmit=9 bytes_invalid=0 send_seq=13778 receive_seq=13778 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996704 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.0 mcu_temp: temp=35.6 sd_pos=116653 sysload=0.49 cputime=50.385 memavail=717192 print_time=830.412 buffer_time=2.081 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 827.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=502859 bytes_read=276983 bytes_retransmit=9 bytes_invalid=0 send_seq=13813 receive_seq=13813 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996709 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.6 mcu_temp: temp=35.4 sd_pos=116838 sysload=0.49 cputime=50.450 memavail=717392 print_time=831.572 buffer_time=2.239 print_stall=0 extruder: target=200 temp=200.1 pwm=0.667
Stats 828.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=504830 bytes_read=277501 bytes_retransmit=9 bytes_invalid=0 send_seq=13854 receive_seq=13854 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.446 raspberry_pi: temp=43.4 mcu_temp: temp=35.5 sd_pos=117163 sysload=0.49 cputime=50.517 memavail=717444 print_time=832.366 buffer_time=2.032 print_stall=0 extruder: target=200 temp=200.2 pwm=0.623
Stats 829.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=507615 bytes_read=278059 bytes_retransmit=9 bytes_invalid=0 send_seq=13906 receive_seq=13906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996727 heater_bed: target=60 temp=60.0 pwm=0.446 raspberry_pi: temp=42.8 mcu_temp: temp=35.5 sd_pos=117640 sysload=0.49 cputime=50.584 memavail=717656 print_time=833.509 buffer_time=2.173 print_stall=0 extruder: target=200 temp=200.1 pwm=0.623
Stats 830.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=509208 bytes_read=278503 bytes_retransmit=9 bytes_invalid=0 send_seq=13939 receive_seq=13938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996722 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=42.7 mcu_temp: temp=35.5 sd_pos=117893 sysload=0.49 cputime=50.655 memavail=717704 print_time=834.623 buffer_time=2.285 print_stall=0 extruder: target=200 temp=200.1 pwm=0.623
Stats 831.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=510342 bytes_read=278972 bytes_retransmit=9 bytes_invalid=0 send_seq=13966 receive_seq=13966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996719 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=43.0 mcu_temp: temp=35.4 sd_pos=117981 sysload=0.45 cputime=50.731 memavail=717212 print_time=835.929 buffer_time=2.591 print_stall=0 extruder: target=200 temp=200.1 pwm=0.674
Stats 832.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=510981 bytes_read=279355 bytes_retransmit=9 bytes_invalid=0 send_seq=13984 receive_seq=13983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996715 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.0 mcu_temp: temp=35.6 sd_pos=118049 sysload=0.45 cputime=50.795 memavail=717216 print_time=836.424 buffer_time=2.084 print_stall=0 extruder: target=200 temp=200.0 pwm=0.674
Stats 833.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=512098 bytes_read=279769 bytes_retransmit=9 bytes_invalid=0 send_seq=14010 receive_seq=14009 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996712 heater_bed: target=60 temp=60.0 pwm=0.306 raspberry_pi: temp=42.7 mcu_temp: temp=35.5 sd_pos=118136 sysload=0.45 cputime=50.862 memavail=717488 print_time=837.767 buffer_time=2.425 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 834.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=513068 bytes_read=280202 bytes_retransmit=9 bytes_invalid=0 send_seq=14034 receive_seq=14033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996708 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.1 mcu_temp: temp=35.6 sd_pos=118235 sysload=0.45 cputime=50.932 memavail=717740 print_time=838.736 buffer_time=2.391 print_stall=0 extruder: target=200 temp=199.9 pwm=0.727
Stats 835.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=513841 bytes_read=280620 bytes_retransmit=9 bytes_invalid=0 send_seq=14054 receive_seq=14054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996705 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=42.9 mcu_temp: temp=35.6 sd_pos=118310 sysload=0.45 cputime=51.002 memavail=717740 print_time=839.652 buffer_time=2.306 print_stall=0 extruder: target=200 temp=199.9 pwm=0.727
Stats 836.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=514369 bytes_read=280989 bytes_retransmit=9 bytes_invalid=0 send_seq=14072 receive_seq=14071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=42.9 mcu_temp: temp=35.6 sd_pos=118378 sysload=0.49 cputime=51.070 memavail=716992 print_time=840.515 buffer_time=2.169 print_stall=0 extruder: target=200 temp=199.8 pwm=0.727
Stats 837.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=515785 bytes_read=281482 bytes_retransmit=9 bytes_invalid=0 send_seq=14102 receive_seq=14102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996707 heater_bed: target=60 temp=60.0 pwm=0.434 raspberry_pi: temp=42.6 mcu_temp: temp=35.6 sd_pos=118533 sysload=0.49 cputime=51.143 memavail=716996 print_time=843.411 buffer_time=4.062 print_stall=0 extruder: target=200 temp=199.8 pwm=0.727
Stats 838.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=515969 bytes_read=281826 bytes_retransmit=9 bytes_invalid=0 send_seq=14114 receive_seq=14114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996707 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=42.3 mcu_temp: temp=35.6 sd_pos=118533 sysload=0.49 cputime=51.205 memavail=717268 print_time=843.411 buffer_time=3.061 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 839.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=516142 bytes_read=282165 bytes_retransmit=9 bytes_invalid=0 send_seq=14126 receive_seq=14125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996710 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=42.2 mcu_temp: temp=35.6 sd_pos=118533 sysload=0.49 cputime=51.266 memavail=717268 print_time=843.411 buffer_time=2.058 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 840.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=518346 bytes_read=282727 bytes_retransmit=9 bytes_invalid=0 send_seq=14169 receive_seq=14169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996712 heater_bed: target=60 temp=60.0 pwm=0.460 raspberry_pi: temp=42.5 mcu_temp: temp=35.5 sd_pos=118931 sysload=0.49 cputime=51.341 memavail=717660 print_time=844.769 buffer_time=2.413 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 841.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=520471 bytes_read=283217 bytes_retransmit=9 bytes_invalid=0 send_seq=14211 receive_seq=14211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996713 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=43.0 mcu_temp: temp=35.6 sd_pos=119332 sysload=0.45 cputime=51.417 memavail=717416 print_time=845.879 buffer_time=2.522 print_stall=0 extruder: target=200 temp=200.0 pwm=0.636
Stats 842.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=522189 bytes_read=283685 bytes_retransmit=9 bytes_invalid=0 send_seq=14247 receive_seq=14247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996708 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=42.5 mcu_temp: temp=35.5 sd_pos=119791 sysload=0.45 cputime=51.494 memavail=717628 print_time=846.854 buffer_time=2.497 print_stall=0 extruder: target=200 temp=200.0 pwm=0.636
Stats 843.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=524154 bytes_read=284195 bytes_retransmit=9 bytes_invalid=0 send_seq=14287 receive_seq=14287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996705 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=42.6 mcu_temp: temp=35.7 sd_pos=120304 sysload=0.45 cputime=51.572 memavail=717436 print_time=847.875 buffer_time=2.516 print_stall=0 extruder: target=200 temp=200.0 pwm=0.636
Stats 844.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=525445 bytes_read=284624 bytes_retransmit=9 bytes_invalid=0 send_seq=14316 receive_seq=14316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996704 heater_bed: target=60 temp=60.0 pwm=0.456 raspberry_pi: temp=42.2 mcu_temp: temp=35.8 sd_pos=120496 sysload=0.45 cputime=51.646 memavail=717148 print_time=848.551 buffer_time=2.191 print_stall=0 extruder: target=200 temp=200.0 pwm=0.636
Stats 845.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=526858 bytes_read=285088 bytes_retransmit=9 bytes_invalid=0 send_seq=14346 receive_seq=14346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996715 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=42.7 mcu_temp: temp=35.8 sd_pos=120679 sysload=0.45 cputime=51.722 memavail=717240 print_time=849.436 buffer_time=2.074 print_stall=0 extruder: target=200 temp=200.0 pwm=0.636
Stats 846.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=529467 bytes_read=285650 bytes_retransmit=9 bytes_invalid=0 send_seq=14397 receive_seq=14396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996721 heater_bed: target=60 temp=60.0 pwm=0.441 raspberry_pi: temp=42.7 mcu_temp: temp=35.6 sd_pos=121083 sysload=0.42 cputime=51.801 memavail=717688 print_time=850.804 buffer_time=2.442 print_stall=0 extruder: target=200 temp=200.1 pwm=0.682
Stats 847.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=530993 bytes_read=286104 bytes_retransmit=9 bytes_invalid=0 send_seq=14430 receive_seq=14430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996718 heater_bed: target=60 temp=60.0 pwm=0.462 raspberry_pi: temp=42.2 mcu_temp: temp=35.7 sd_pos=121350 sysload=0.42 cputime=51.874 memavail=717264 print_time=851.391 buffer_time=2.026 print_stall=0 extruder: target=200 temp=200.0 pwm=0.682
Stats 848.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=533343 bytes_read=286638 bytes_retransmit=9 bytes_invalid=0 send_seq=14477 receive_seq=14477 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996713 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.5 mcu_temp: temp=35.7 sd_pos=121691 sysload=0.42 cputime=51.952 memavail=717264 print_time=852.431 buffer_time=2.064 print_stall=0 extruder: target=200 temp=200.0 pwm=0.682
Stats 849.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=535008 bytes_read=287120 bytes_retransmit=9 bytes_invalid=0 send_seq=14511 receive_seq=14511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996714 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.3 mcu_temp: temp=35.7 sd_pos=121907 sysload=0.42 cputime=52.028 memavail=717264 print_time=853.651 buffer_time=2.283 print_stall=0 extruder: target=200 temp=199.9 pwm=0.682
Stats 850.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=538039 bytes_read=287699 bytes_retransmit=9 bytes_invalid=0 send_seq=14567 receive_seq=14567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996711 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.2 mcu_temp: temp=35.8 sd_pos=122454 sysload=0.42 cputime=52.106 memavail=716760 print_time=854.900 buffer_time=2.531 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 851.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=539670 bytes_read=288173 bytes_retransmit=9 bytes_invalid=0 send_seq=14603 receive_seq=14602 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996709 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=43.2 mcu_temp: temp=35.9 sd_pos=122756 sysload=0.38 cputime=52.182 memavail=716544 print_time=855.458 buffer_time=2.089 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 852.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=541223 bytes_read=288645 bytes_retransmit=9 bytes_invalid=0 send_seq=14635 receive_seq=14634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996717 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=42.3 mcu_temp: temp=35.7 sd_pos=122927 sysload=0.38 cputime=52.259 memavail=717060 print_time=856.450 buffer_time=2.080 print_stall=0 extruder: target=200 temp=200.0 pwm=0.655
Stats 853.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=543522 bytes_read=289164 bytes_retransmit=9 bytes_invalid=0 send_seq=14681 receive_seq=14681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996713 heater_bed: target=60 temp=60.0 pwm=0.470 raspberry_pi: temp=42.2 mcu_temp: temp=35.7 sd_pos=123352 sysload=0.38 cputime=52.339 memavail=717060 print_time=857.589 buffer_time=2.217 print_stall=0 extruder: target=200 temp=200.0 pwm=0.655
Stats 854.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=546115 bytes_read=289713 bytes_retransmit=9 bytes_invalid=0 send_seq=14732 receive_seq=14731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996712 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=42.8 mcu_temp: temp=35.7 sd_pos=123833 sysload=0.38 cputime=52.418 memavail=716812 print_time=858.659 buffer_time=2.285 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 855.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=548705 bytes_read=290295 bytes_retransmit=9 bytes_invalid=0 send_seq=14782 receive_seq=14782 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996708 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=42.6 mcu_temp: temp=35.5 sd_pos=124545 sysload=0.38 cputime=52.505 memavail=717420 print_time=860.592 buffer_time=3.218 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 856.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=548866 bytes_read=290634 bytes_retransmit=9 bytes_invalid=0 send_seq=14793 receive_seq=14793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996715 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=42.5 mcu_temp: temp=35.8 sd_pos=124545 sysload=0.35 cputime=52.575 memavail=717368 print_time=860.592 buffer_time=2.215 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 857.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=550771 bytes_read=291128 bytes_retransmit=9 bytes_invalid=0 send_seq=14832 receive_seq=14832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996711 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=42.6 mcu_temp: temp=35.8 sd_pos=125091 sysload=0.35 cputime=52.655 memavail=717188 print_time=861.651 buffer_time=2.272 print_stall=0 extruder: target=200 temp=200.1 pwm=0.671
Stats 858.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=552564 bytes_read=291620 bytes_retransmit=9 bytes_invalid=0 send_seq=14869 receive_seq=14868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996709 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=42.6 mcu_temp: temp=35.7 sd_pos=125551 sysload=0.35 cputime=52.739 memavail=717700 print_time=862.994 buffer_time=2.612 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 859.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=553966 bytes_read=292064 bytes_retransmit=9 bytes_invalid=0 send_seq=14900 receive_seq=14900 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996723 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=42.3 mcu_temp: temp=35.6 sd_pos=125937 sysload=0.35 cputime=52.814 memavail=717460 print_time=863.515 buffer_time=2.130 print_stall=0 extruder: target=200 temp=200.0 pwm=0.724
Stats 860.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=556276 bytes_read=292583 bytes_retransmit=9 bytes_invalid=0 send_seq=14945 receive_seq=14944 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996720 heater_bed: target=60 temp=60.0 pwm=0.443 raspberry_pi: temp=42.5 mcu_temp: temp=35.5 sd_pos=126385 sysload=0.35 cputime=52.895 memavail=717212 print_time=865.476 buffer_time=3.089 print_stall=0 extruder: target=200 temp=199.9 pwm=0.724
Stats 861.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=556465 bytes_read=292975 bytes_retransmit=9 bytes_invalid=0 send_seq=14958 receive_seq=14957 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996716 heater_bed: target=60 temp=60.0 pwm=0.443 raspberry_pi: temp=42.8 mcu_temp: temp=35.7 sd_pos=126385 sysload=0.32 cputime=52.965 memavail=717192 print_time=865.476 buffer_time=2.085 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 862.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=558391 bytes_read=293454 bytes_retransmit=9 bytes_invalid=0 send_seq=14997 receive_seq=14996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996711 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=42.1 mcu_temp: temp=35.7 sd_pos=126781 sysload=0.32 cputime=53.043 memavail=716756 print_time=866.634 buffer_time=2.240 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 863.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=559102 bytes_read=293848 bytes_retransmit=9 bytes_invalid=0 send_seq=15016 receive_seq=15015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.9 mcu_temp: temp=35.9 sd_pos=126881 sysload=0.32 cputime=53.117 memavail=716916 print_time=868.317 buffer_time=2.920 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 864.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=559862 bytes_read=294270 bytes_retransmit=9 bytes_invalid=0 send_seq=15037 receive_seq=15037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.5 mcu_temp: temp=35.8 sd_pos=127108 sysload=0.32 cputime=53.191 memavail=716720 print_time=868.788 buffer_time=2.388 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 865.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=561921 bytes_read=294774 bytes_retransmit=9 bytes_invalid=0 send_seq=15078 receive_seq=15078 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.7 mcu_temp: temp=35.6 sd_pos=127454 sysload=0.32 cputime=53.275 memavail=717804 print_time=870.918 buffer_time=3.513 print_stall=0 extruder: target=200 temp=200.0 pwm=0.682
Stats 866.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=562094 bytes_read=295133 bytes_retransmit=9 bytes_invalid=0 send_seq=15090 receive_seq=15090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996708 heater_bed: target=60 temp=60.0 pwm=0.333 raspberry_pi: temp=42.3 mcu_temp: temp=35.8 sd_pos=127454 sysload=0.30 cputime=53.344 memavail=717304 print_time=870.918 buffer_time=2.510 print_stall=0 extruder: target=200 temp=200.0 pwm=0.682
Stats 867.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=563361 bytes_read=295585 bytes_retransmit=9 bytes_invalid=0 send_seq=15120 receive_seq=15120 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.463 raspberry_pi: temp=43.3 mcu_temp: temp=35.9 sd_pos=127678 sysload=0.30 cputime=53.421 memavail=716864 print_time=871.595 buffer_time=2.185 print_stall=0 extruder: target=200 temp=200.0 pwm=0.682
Stats 868.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=565231 bytes_read=296057 bytes_retransmit=9 bytes_invalid=0 send_seq=15159 receive_seq=15159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=42.3 mcu_temp: temp=35.9 sd_pos=128044 sysload=0.30 cputime=53.499 memavail=716564 print_time=872.669 buffer_time=2.256 print_stall=0 extruder: target=200 temp=200.0 pwm=0.682
Stats 869.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=567311 bytes_read=296580 bytes_retransmit=9 bytes_invalid=0 send_seq=15201 receive_seq=15201 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996705 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=42.6 mcu_temp: temp=35.8 sd_pos=128707 sysload=0.30 cputime=53.584 memavail=717120 print_time=873.692 buffer_time=2.276 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
Stats 870.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=569194 bytes_read=297083 bytes_retransmit=9 bytes_invalid=0 send_seq=15239 receive_seq=15239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996698 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=42.6 mcu_temp: temp=35.8 sd_pos=129203 sysload=0.30 cputime=53.663 memavail=717140 print_time=874.839 buffer_time=2.421 print_stall=0 extruder: target=200 temp=199.9 pwm=0.733
Stats 871.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=571082 bytes_read=297557 bytes_retransmit=9 bytes_invalid=0 send_seq=15277 receive_seq=15277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996696 heater_bed: target=60 temp=60.0 pwm=0.445 raspberry_pi: temp=42.5 mcu_temp: temp=35.8 sd_pos=129607 sysload=0.27 cputime=53.740 memavail=717148 print_time=875.741 buffer_time=2.321 print_stall=0 extruder: target=200 temp=199.9 pwm=0.733
Stats 872.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=573528 bytes_read=298105 bytes_retransmit=9 bytes_invalid=0 send_seq=15324 receive_seq=15324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996701 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=42.7 mcu_temp: temp=35.7 sd_pos=130036 sysload=0.27 cputime=53.816 memavail=716668 print_time=877.016 buffer_time=2.592 print_stall=0 extruder: target=200 temp=199.9 pwm=0.733
Stats 873.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=575072 bytes_read=298578 bytes_retransmit=9 bytes_invalid=0 send_seq=15359 receive_seq=15359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996698 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=42.7 mcu_temp: temp=35.9 sd_pos=130301 sysload=0.27 cputime=53.895 memavail=716948 print_time=877.602 buffer_time=2.169 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 874.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=577300 bytes_read=299077 bytes_retransmit=9 bytes_invalid=0 send_seq=15403 receive_seq=15402 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996701 heater_bed: target=60 temp=60.0 pwm=0.361 raspberry_pi: temp=42.4 mcu_temp: temp=35.8 sd_pos=130703 sysload=0.27 cputime=53.979 memavail=717464 print_time=878.637 buffer_time=2.202 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 875.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=578885 bytes_read=299582 bytes_retransmit=9 bytes_invalid=0 send_seq=15437 receive_seq=15437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.449 raspberry_pi: temp=42.9 mcu_temp: temp=35.7 sd_pos=131067 sysload=0.27 cputime=54.057 memavail=716992 print_time=879.701 buffer_time=2.265 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 876.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=581194 bytes_read=300110 bytes_retransmit=9 bytes_invalid=0 send_seq=15483 receive_seq=15483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996711 heater_bed: target=60 temp=60.0 pwm=0.477 raspberry_pi: temp=42.9 mcu_temp: temp=35.8 sd_pos=131940 sysload=0.25 cputime=54.142 memavail=717196 print_time=880.730 buffer_time=2.292 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 877.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=582469 bytes_read=300539 bytes_retransmit=9 bytes_invalid=0 send_seq=15512 receive_seq=15512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996708 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=42.7 mcu_temp: temp=35.9 sd_pos=132256 sysload=0.25 cputime=54.221 memavail=717708 print_time=881.483 buffer_time=2.042 print_stall=0 extruder: target=200 temp=200.2 pwm=0.656
Stats 878.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=584188 bytes_read=301027 bytes_retransmit=9 bytes_invalid=0 send_seq=15547 receive_seq=15547 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996707 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=42.7 mcu_temp: temp=35.8 sd_pos=132749 sysload=0.25 cputime=54.303 memavail=717760 print_time=882.515 buffer_time=2.070 print_stall=0 extruder: target=200 temp=200.2 pwm=0.649
Stats 879.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=586093 bytes_read=301520 bytes_retransmit=9 bytes_invalid=0 send_seq=15586 receive_seq=15586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996704 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=43.2 mcu_temp: temp=35.8 sd_pos=133268 sysload=0.25 cputime=54.379 memavail=717484 print_time=883.442 buffer_time=1.994 print_stall=0 extruder: target=200 temp=200.2 pwm=0.649
Stats 880.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=588344 bytes_read=302039 bytes_retransmit=9 bytes_invalid=0 send_seq=15630 receive_seq=15630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996701 heater_bed: target=60 temp=60.0 pwm=0.353 raspberry_pi: temp=42.7 mcu_temp: temp=36.0 sd_pos=133783 sysload=0.25 cputime=54.461 memavail=717308 print_time=885.108 buffer_time=2.656 print_stall=0 extruder: target=200 temp=200.2 pwm=0.649
Stats 881.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=590636 bytes_read=302596 bytes_retransmit=9 bytes_invalid=0 send_seq=15676 receive_seq=15676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996697 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=42.7 mcu_temp: temp=35.9 sd_pos=134431 sysload=0.23 cputime=54.542 memavail=717256 print_time=886.204 buffer_time=2.748 print_stall=0 extruder: target=200 temp=200.2 pwm=0.649
Stats 882.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=591455 bytes_read=302985 bytes_retransmit=9 bytes_invalid=0 send_seq=15697 receive_seq=15697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=43.2 mcu_temp: temp=35.8 sd_pos=134693 sysload=0.23 cputime=54.615 memavail=717396 print_time=886.502 buffer_time=2.043 print_stall=0 extruder: target=200 temp=200.2 pwm=0.630
Stats 883.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=593109 bytes_read=303454 bytes_retransmit=9 bytes_invalid=0 send_seq=15731 receive_seq=15731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=42.7 mcu_temp: temp=35.8 sd_pos=135031 sysload=0.23 cputime=54.694 memavail=717196 print_time=888.603 buffer_time=3.140 print_stall=0 extruder: target=200 temp=200.2 pwm=0.630
Stats 884.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=593298 bytes_read=303831 bytes_retransmit=9 bytes_invalid=0 send_seq=15744 receive_seq=15744 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996688 heater_bed: target=60 temp=60.0 pwm=0.442 raspberry_pi: temp=42.7 mcu_temp: temp=35.8 sd_pos=135031 sysload=0.23 cputime=54.762 memavail=717448 print_time=888.603 buffer_time=2.138 print_stall=0 extruder: target=200 temp=200.1 pwm=0.703
Stats 885.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=594385 bytes_read=304235 bytes_retransmit=9 bytes_invalid=0 send_seq=15769 receive_seq=15768 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=42.8 mcu_temp: temp=35.8 sd_pos=135255 sysload=0.23 cputime=54.839 memavail=717392 print_time=889.542 buffer_time=2.073 print_stall=0 extruder: target=200 temp=200.1 pwm=0.703
Stats 886.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=596422 bytes_read=304754 bytes_retransmit=9 bytes_invalid=0 send_seq=15809 receive_seq=15809 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996702 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=43.1 mcu_temp: temp=35.9 sd_pos=135603 sysload=0.29 cputime=54.917 memavail=717280 print_time=891.674 buffer_time=3.202 print_stall=0 extruder: target=200 temp=200.0 pwm=0.703
Stats 887.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=596563 bytes_read=305116 bytes_retransmit=9 bytes_invalid=0 send_seq=15819 receive_seq=15819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996698 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=42.7 mcu_temp: temp=35.7 sd_pos=135603 sysload=0.29 cputime=54.986 memavail=716292 print_time=891.674 buffer_time=2.199 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 888.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=598771 bytes_read=305615 bytes_retransmit=9 bytes_invalid=0 send_seq=15863 receive_seq=15862 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=43.3 mcu_temp: temp=35.9 sd_pos=136065 sysload=0.29 cputime=55.063 memavail=716544 print_time=893.033 buffer_time=2.556 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 889.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=600871 bytes_read=306124 bytes_retransmit=9 bytes_invalid=0 send_seq=15905 receive_seq=15904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996697 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.2 mcu_temp: temp=36.0 sd_pos=136431 sysload=0.29 cputime=55.140 memavail=716796 print_time=894.136 buffer_time=2.656 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 890.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=602717 bytes_read=306626 bytes_retransmit=9 bytes_invalid=0 send_seq=15943 receive_seq=15942 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996696 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=43.4 mcu_temp: temp=36.0 sd_pos=136956 sysload=0.29 cputime=55.218 memavail=716756 print_time=895.125 buffer_time=2.642 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 891.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=603666 bytes_read=307045 bytes_retransmit=9 bytes_invalid=0 send_seq=15966 receive_seq=15966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=43.2 mcu_temp: temp=35.9 sd_pos=137355 sysload=0.35 cputime=55.291 memavail=716336 print_time=895.607 buffer_time=2.121 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 892.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=605536 bytes_read=307545 bytes_retransmit=9 bytes_invalid=0 send_seq=16005 receive_seq=16005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996693 heater_bed: target=60 temp=60.0 pwm=0.439 raspberry_pi: temp=43.2 mcu_temp: temp=35.9 sd_pos=137877 sysload=0.35 cputime=55.372 memavail=716600 print_time=896.615 buffer_time=2.125 print_stall=0 extruder: target=200 temp=199.8 pwm=0.710
Stats 893.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=607118 bytes_read=308015 bytes_retransmit=9 bytes_invalid=0 send_seq=16039 receive_seq=16039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996691 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.6 mcu_temp: temp=36.0 sd_pos=138242 sysload=0.35 cputime=55.448 memavail=716852 print_time=897.678 buffer_time=2.187 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 894.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=609397 bytes_read=308523 bytes_retransmit=9 bytes_invalid=0 send_seq=16084 receive_seq=16084 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996689 heater_bed: target=60 temp=60.0 pwm=0.449 raspberry_pi: temp=43.7 mcu_temp: temp=36.0 sd_pos=139049 sysload=0.35 cputime=55.535 memavail=716612 print_time=898.701 buffer_time=2.207 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 895.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=611945 bytes_read=309067 bytes_retransmit=9 bytes_invalid=0 send_seq=16134 receive_seq=16133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996686 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.3 mcu_temp: temp=36.0 sd_pos=139697 sysload=0.35 cputime=55.617 memavail=717372 print_time=900.371 buffer_time=2.873 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 896.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=614226 bytes_read=309619 bytes_retransmit=9 bytes_invalid=0 send_seq=16179 receive_seq=16178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996683 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.1 mcu_temp: temp=35.9 sd_pos=140438 sysload=0.48 cputime=55.700 memavail=717436 print_time=901.444 buffer_time=2.940 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 897.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=614874 bytes_read=309998 bytes_retransmit=9 bytes_invalid=0 send_seq=16197 receive_seq=16197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996681 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.1 mcu_temp: temp=35.9 sd_pos=140667 sysload=0.48 cputime=55.764 memavail=716956 print_time=901.631 buffer_time=2.126 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 898.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=616649 bytes_read=310472 bytes_retransmit=9 bytes_invalid=0 send_seq=16232 receive_seq=16232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996691 heater_bed: target=60 temp=60.0 pwm=0.440 raspberry_pi: temp=43.4 mcu_temp: temp=36.0 sd_pos=140888 sysload=0.48 cputime=55.838 memavail=717160 print_time=903.083 buffer_time=2.578 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 899.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=619048 bytes_read=311024 bytes_retransmit=9 bytes_invalid=0 send_seq=16280 receive_seq=16280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=43.2 mcu_temp: temp=36.0 sd_pos=141495 sysload=0.48 cputime=55.920 memavail=717212 print_time=904.254 buffer_time=2.747 print_stall=0 extruder: target=200 temp=200.2 pwm=0.619
Stats 900.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=620382 bytes_read=311473 bytes_retransmit=9 bytes_invalid=0 send_seq=16310 receive_seq=16310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996692 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=43.1 mcu_temp: temp=36.1 sd_pos=141798 sysload=0.48 cputime=55.999 memavail=717412 print_time=905.095 buffer_time=2.587 print_stall=0 extruder: target=200 temp=200.2 pwm=0.619
Stats 901.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=621451 bytes_read=311911 bytes_retransmit=9 bytes_invalid=0 send_seq=16335 receive_seq=16335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996697 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=43.7 mcu_temp: temp=36.0 sd_pos=142030 sysload=0.60 cputime=56.075 memavail=717468 print_time=906.576 buffer_time=3.067 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 902.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=621592 bytes_read=312259 bytes_retransmit=9 bytes_invalid=0 send_seq=16345 receive_seq=16345 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=43.9 mcu_temp: temp=36.0 sd_pos=142030 sysload=0.60 cputime=56.144 memavail=716716 print_time=906.576 buffer_time=2.067 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 903.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=622622 bytes_read=312663 bytes_retransmit=9 bytes_invalid=0 send_seq=16369 receive_seq=16369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996696 heater_bed: target=60 temp=60.0 pwm=0.446 raspberry_pi: temp=43.4 mcu_temp: temp=36.0 sd_pos=142288 sysload=0.60 cputime=56.220 memavail=717480 print_time=907.525 buffer_time=2.015 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 904.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=624717 bytes_read=313186 bytes_retransmit=9 bytes_invalid=0 send_seq=16411 receive_seq=16411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996701 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.7 mcu_temp: temp=36.0 sd_pos=142639 sysload=0.60 cputime=56.298 memavail=717440 print_time=909.654 buffer_time=3.143 print_stall=0 extruder: target=200 temp=200.0 pwm=0.678
Stats 905.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=624922 bytes_read=313569 bytes_retransmit=9 bytes_invalid=0 send_seq=16425 receive_seq=16425 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996701 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.8 mcu_temp: temp=36.0 sd_pos=142639 sysload=0.60 cputime=56.368 memavail=718284 print_time=909.654 buffer_time=2.142 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 906.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=627095 bytes_read=314068 bytes_retransmit=9 bytes_invalid=0 send_seq=16468 receive_seq=16468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996698 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.1 mcu_temp: temp=36.0 sd_pos=143096 sysload=0.64 cputime=56.441 memavail=718308 print_time=911.018 buffer_time=2.505 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 907.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=629301 bytes_read=314601 bytes_retransmit=9 bytes_invalid=0 send_seq=16512 receive_seq=16512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=42.9 mcu_temp: temp=36.1 sd_pos=143494 sysload=0.64 cputime=56.517 memavail=719072 print_time=912.143 buffer_time=2.630 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 908.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=631149 bytes_read=315099 bytes_retransmit=9 bytes_invalid=0 send_seq=16552 receive_seq=16552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996692 heater_bed: target=60 temp=60.0 pwm=0.459 raspberry_pi: temp=42.7 mcu_temp: temp=36.0 sd_pos=143990 sysload=0.64 cputime=56.595 memavail=719096 print_time=913.122 buffer_time=2.608 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 909.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=632219 bytes_read=315508 bytes_retransmit=9 bytes_invalid=0 send_seq=16577 receive_seq=16577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996697 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=42.7 mcu_temp: temp=36.0 sd_pos=144388 sysload=0.64 cputime=56.666 memavail=719344 print_time=913.610 buffer_time=2.095 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 910.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=634275 bytes_read=316038 bytes_retransmit=9 bytes_invalid=0 send_seq=16617 receive_seq=16617 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=42.5 mcu_temp: temp=36.0 sd_pos=144922 sysload=0.64 cputime=56.746 memavail=718908 print_time=914.618 buffer_time=2.102 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 911.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=635624 bytes_read=316486 bytes_retransmit=9 bytes_invalid=0 send_seq=16647 receive_seq=16647 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=42.7 mcu_temp: temp=36.1 sd_pos=145284 sysload=0.58 cputime=56.816 memavail=719184 print_time=915.621 buffer_time=2.105 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 912.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=638088 bytes_read=317010 bytes_retransmit=9 bytes_invalid=0 send_seq=16695 receive_seq=16695 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996700 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=42.5 mcu_temp: temp=36.1 sd_pos=146100 sysload=0.58 cputime=56.892 memavail=719452 print_time=916.698 buffer_time=2.180 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 913.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=640419 bytes_read=317563 bytes_retransmit=9 bytes_invalid=0 send_seq=16743 receive_seq=16743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996697 heater_bed: target=60 temp=60.0 pwm=0.488 raspberry_pi: temp=42.7 mcu_temp: temp=36.1 sd_pos=146720 sysload=0.58 cputime=56.970 memavail=719740 print_time=918.309 buffer_time=2.791 print_stall=0 extruder: target=200 temp=200.0 pwm=0.633
Stats 914.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=642792 bytes_read=318106 bytes_retransmit=9 bytes_invalid=0 send_seq=16792 receive_seq=16792 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=43.0 mcu_temp: temp=36.2 sd_pos=147467 sysload=0.58 cputime=57.047 memavail=720244 print_time=919.419 buffer_time=2.900 print_stall=0 extruder: target=200 temp=200.1 pwm=0.638
Stats 915.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=643467 bytes_read=318485 bytes_retransmit=9 bytes_invalid=0 send_seq=16811 receive_seq=16811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996692 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=43.1 mcu_temp: temp=36.1 sd_pos=147694 sysload=0.58 cputime=57.113 memavail=720028 print_time=919.621 buffer_time=2.101 print_stall=0 extruder: target=200 temp=200.1 pwm=0.638
Stats 916.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=645173 bytes_read=318993 bytes_retransmit=9 bytes_invalid=0 send_seq=16847 receive_seq=16847 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996690 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=43.1 mcu_temp: temp=36.0 sd_pos=147922 sysload=0.54 cputime=57.183 memavail=719812 print_time=921.076 buffer_time=2.555 print_stall=0 extruder: target=200 temp=200.1 pwm=0.638
Stats 917.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=647578 bytes_read=319526 bytes_retransmit=9 bytes_invalid=0 send_seq=16894 receive_seq=16894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=167996690 heater_bed: target=60 temp=60.0 pwm=0.462 raspberry_pi: temp=42.7 mcu_temp: temp=36.2 sd_pos=148536 sysload=0.54 cputime=57.256 memavail=719764 print_time=922.255 buffer_time=2.734 print_stall=0 extruder: target=200 temp=200.1 pwm=0.638
Stats 918.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=648822 bytes_read=319941 bytes_retransmit=9 bytes_invalid=0 send_seq=16922 receive_seq=16922 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996691 heater_bed: target=60 temp=60.0 pwm=0.462 raspberry_pi: temp=42.8 mcu_temp: temp=36.1 sd_pos=148810 sysload=0.54 cputime=57.328 memavail=720244 print_time=923.077 buffer_time=2.555 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 919.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=649937 bytes_read=320379 bytes_retransmit=9 bytes_invalid=0 send_seq=16949 receive_seq=16949 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996688 heater_bed: target=60 temp=60.0 pwm=0.361 raspberry_pi: temp=42.7 mcu_temp: temp=36.2 sd_pos=149040 sysload=0.54 cputime=57.400 memavail=720256 print_time=924.554 buffer_time=3.032 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 920.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=650110 bytes_read=320737 bytes_retransmit=9 bytes_invalid=0 send_seq=16961 receive_seq=16961 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996687 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=42.9 mcu_temp: temp=36.3 sd_pos=149040 sysload=0.54 cputime=57.464 memavail=720256 print_time=924.554 buffer_time=2.031 print_stall=0 extruder: target=200 temp=200.0 pwm=0.702
Stats 921.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=651841 bytes_read=321216 bytes_retransmit=9 bytes_invalid=0 send_seq=16997 receive_seq=16997 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996687 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=42.6 mcu_temp: temp=36.2 sd_pos=149459 sysload=0.57 cputime=57.535 memavail=720280 print_time=926.039 buffer_time=2.515 print_stall=0 extruder: target=200 temp=200.0 pwm=0.702
Stats 922.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=653277 bytes_read=321694 bytes_retransmit=9 bytes_invalid=0 send_seq=17030 receive_seq=17030 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996686 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=42.4 mcu_temp: temp=36.2 sd_pos=149619 sysload=0.57 cputime=57.603 memavail=720292 print_time=927.632 buffer_time=3.107 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 923.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=653423 bytes_read=322047 bytes_retransmit=9 bytes_invalid=0 send_seq=17041 receive_seq=17041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996684 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=42.3 mcu_temp: temp=36.2 sd_pos=149619 sysload=0.57 cputime=57.668 memavail=719552 print_time=927.632 buffer_time=2.107 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 924.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=655709 bytes_read=322566 bytes_retransmit=9 bytes_invalid=0 send_seq=17088 receive_seq=17088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996693 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=42.8 mcu_temp: temp=36.2 sd_pos=150077 sysload=0.57 cputime=57.743 memavail=719324 print_time=929.003 buffer_time=2.477 print_stall=0 extruder: target=200 temp=199.8 pwm=0.700
Stats 925.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=657856 bytes_read=323094 bytes_retransmit=9 bytes_invalid=0 send_seq=17131 receive_seq=17131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996690 heater_bed: target=60 temp=60.0 pwm=0.463 raspberry_pi: temp=43.2 mcu_temp: temp=36.0 sd_pos=150480 sysload=0.57 cputime=57.816 memavail=720052 print_time=930.128 buffer_time=2.602 print_stall=0 extruder: target=200 temp=199.7 pwm=0.700
Stats 926.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=659796 bytes_read=323612 bytes_retransmit=9 bytes_invalid=0 send_seq=17172 receive_seq=17172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996688 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.4 mcu_temp: temp=36.3 sd_pos=150976 sysload=0.53 cputime=57.889 memavail=719856 print_time=931.123 buffer_time=2.595 print_stall=0 extruder: target=200 temp=199.7 pwm=0.700
Stats 927.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=660853 bytes_read=324026 bytes_retransmit=9 bytes_invalid=0 send_seq=17198 receive_seq=17198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996686 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.3 mcu_temp: temp=36.2 sd_pos=151373 sysload=0.53 cputime=57.958 memavail=719364 print_time=931.618 buffer_time=2.090 print_stall=0 extruder: target=200 temp=199.7 pwm=0.700
Stats 928.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=663014 bytes_read=324559 bytes_retransmit=9 bytes_invalid=0 send_seq=17242 receive_seq=17242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996679 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=43.1 mcu_temp: temp=36.3 sd_pos=151872 sysload=0.53 cputime=58.037 memavail=718868 print_time=932.634 buffer_time=2.104 print_stall=0 extruder: target=200 temp=199.8 pwm=0.700
Stats 929.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=664602 bytes_read=325027 bytes_retransmit=9 bytes_invalid=0 send_seq=17276 receive_seq=17276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996691 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=43.3 mcu_temp: temp=36.3 sd_pos=152231 sysload=0.53 cputime=58.106 memavail=718868 print_time=933.695 buffer_time=2.164 print_stall=0 extruder: target=200 temp=199.8 pwm=0.708
Stats 930.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=666876 bytes_read=325531 bytes_retransmit=9 bytes_invalid=0 send_seq=17320 receive_seq=17320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=43.5 mcu_temp: temp=36.2 sd_pos=153140 sysload=0.53 cputime=58.179 memavail=718620 print_time=934.720 buffer_time=2.188 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 931.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=669138 bytes_read=326086 bytes_retransmit=9 bytes_invalid=0 send_seq=17365 receive_seq=17365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.4 mcu_temp: temp=36.3 sd_pos=153761 sysload=0.57 cputime=58.254 memavail=718380 print_time=936.320 buffer_time=2.788 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 932.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=671644 bytes_read=326629 bytes_retransmit=9 bytes_invalid=0 send_seq=17414 receive_seq=17414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.9 mcu_temp: temp=36.3 sd_pos=154474 sysload=0.57 cputime=58.328 memavail=718128 print_time=937.456 buffer_time=2.925 print_stall=0 extruder: target=200 temp=200.0 pwm=0.652
Stats 933.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=672314 bytes_read=327008 bytes_retransmit=9 bytes_invalid=0 send_seq=17433 receive_seq=17433 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=167996693 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.7 mcu_temp: temp=36.2 sd_pos=154701 sysload=0.57 cputime=58.392 memavail=717120 print_time=937.646 buffer_time=2.114 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 934.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=674065 bytes_read=327501 bytes_retransmit=9 bytes_invalid=0 send_seq=17469 receive_seq=17469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996701 heater_bed: target=60 temp=60.0 pwm=0.334 raspberry_pi: temp=42.4 mcu_temp: temp=36.3 sd_pos=154928 sysload=0.57 cputime=58.461 memavail=717408 print_time=939.103 buffer_time=2.571 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 935.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=676531 bytes_read=328044 bytes_retransmit=9 bytes_invalid=0 send_seq=17518 receive_seq=17518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996697 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=42.4 mcu_temp: temp=36.3 sd_pos=155610 sysload=0.57 cputime=58.538 memavail=717408 print_time=940.294 buffer_time=2.761 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 936.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=677779 bytes_read=328488 bytes_retransmit=9 bytes_invalid=0 send_seq=17547 receive_seq=17547 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=42.7 mcu_temp: temp=36.4 sd_pos=155883 sysload=0.52 cputime=58.606 memavail=717928 print_time=941.113 buffer_time=2.580 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 937.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=678906 bytes_read=328936 bytes_retransmit=9 bytes_invalid=0 send_seq=17574 receive_seq=17574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996691 heater_bed: target=60 temp=60.0 pwm=0.323 raspberry_pi: temp=42.4 mcu_temp: temp=36.4 sd_pos=156116 sysload=0.52 cputime=58.675 memavail=717676 print_time=942.596 buffer_time=3.062 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 938.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=679074 bytes_read=329289 bytes_retransmit=9 bytes_invalid=0 send_seq=17585 receive_seq=17585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996689 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=43.0 mcu_temp: temp=36.2 sd_pos=156116 sysload=0.52 cputime=58.735 memavail=716920 print_time=942.596 buffer_time=2.061 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 939.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=680123 bytes_read=329703 bytes_retransmit=9 bytes_invalid=0 send_seq=17611 receive_seq=17611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996691 heater_bed: target=60 temp=60.0 pwm=0.461 raspberry_pi: temp=42.6 mcu_temp: temp=36.2 sd_pos=156341 sysload=0.52 cputime=58.801 memavail=716988 print_time=943.551 buffer_time=2.016 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 940.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=682265 bytes_read=330231 bytes_retransmit=9 bytes_invalid=0 send_seq=17654 receive_seq=17654 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996687 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=43.2 mcu_temp: temp=36.4 sd_pos=156723 sysload=0.52 cputime=58.875 memavail=716736 print_time=945.677 buffer_time=3.141 print_stall=0 extruder: target=200 temp=200.1 pwm=0.703
Stats 941.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=682411 bytes_read=330599 bytes_retransmit=9 bytes_invalid=0 send_seq=17665 receive_seq=17665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996684 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=42.4 mcu_temp: temp=36.4 sd_pos=156723 sysload=0.48 cputime=58.936 memavail=716936 print_time=945.677 buffer_time=2.140 print_stall=0 extruder: target=200 temp=200.0 pwm=0.703
Stats 942.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=684231 bytes_read=331073 bytes_retransmit=9 bytes_invalid=0 send_seq=17703 receive_seq=17703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996686 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=42.5 mcu_temp: temp=36.3 sd_pos=157089 sysload=0.48 cputime=59.003 memavail=717196 print_time=946.773 buffer_time=2.235 print_stall=0 extruder: target=200 temp=200.0 pwm=0.703
Stats 943.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=686521 bytes_read=331608 bytes_retransmit=9 bytes_invalid=0 send_seq=17748 receive_seq=17748 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996683 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=42.5 mcu_temp: temp=36.5 sd_pos=157555 sysload=0.48 cputime=59.075 memavail=716496 print_time=948.118 buffer_time=2.580 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 944.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=688365 bytes_read=332100 bytes_retransmit=9 bytes_invalid=0 send_seq=17789 receive_seq=17789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996680 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.0 mcu_temp: temp=36.4 sd_pos=158106 sysload=0.48 cputime=59.151 memavail=716456 print_time=948.911 buffer_time=2.372 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 945.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=690240 bytes_read=332570 bytes_retransmit=9 bytes_invalid=0 send_seq=17827 receive_seq=17827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=167996677 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.7 mcu_temp: temp=36.3 sd_pos=158770 sysload=0.48 cputime=59.224 memavail=716772 print_time=949.934 buffer_time=2.395 print_stall=0 extruder: target=200 temp=199.8 pwm=0.693
Stats 946.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=691585 bytes_read=333043 bytes_retransmit=9 bytes_invalid=0 send_seq=17856 receive_seq=17856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996696 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.7 mcu_temp: temp=36.3 sd_pos=159038 sysload=0.44 cputime=59.293 memavail=717056 print_time=950.750 buffer_time=2.210 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 947.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=693374 bytes_read=333531 bytes_retransmit=9 bytes_invalid=0 send_seq=17894 receive_seq=17894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996700 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.4 mcu_temp: temp=36.5 sd_pos=159402 sysload=0.44 cputime=59.367 memavail=717256 print_time=951.811 buffer_time=2.270 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 948.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=695575 bytes_read=334035 bytes_retransmit=9 bytes_invalid=0 send_seq=17938 receive_seq=17938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996696 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=42.8 mcu_temp: temp=36.3 sd_pos=160153 sysload=0.44 cputime=59.444 memavail=717032 print_time=952.820 buffer_time=2.279 print_stall=0 extruder: target=200 temp=199.9 pwm=0.666
Stats 949.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=696873 bytes_read=334498 bytes_retransmit=9 bytes_invalid=0 send_seq=17968 receive_seq=17968 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.453 raspberry_pi: temp=43.2 mcu_temp: temp=36.5 sd_pos=160471 sysload=0.44 cputime=59.517 memavail=717148 print_time=953.581 buffer_time=2.040 print_stall=0 extruder: target=200 temp=199.9 pwm=0.666
Stats 950.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=698584 bytes_read=334976 bytes_retransmit=9 bytes_invalid=0 send_seq=18004 receive_seq=18004 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=43.1 mcu_temp: temp=36.6 sd_pos=160993 sysload=0.44 cputime=59.587 memavail=717536 print_time=954.612 buffer_time=2.071 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 951.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=700552 bytes_read=335480 bytes_retransmit=9 bytes_invalid=0 send_seq=18045 receive_seq=18045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996691 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=42.6 mcu_temp: temp=36.2 sd_pos=161548 sysload=0.40 cputime=59.656 memavail=717312 print_time=955.547 buffer_time=2.004 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 952.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=702816 bytes_read=336018 bytes_retransmit=9 bytes_invalid=0 send_seq=18090 receive_seq=18090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996689 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=43.0 mcu_temp: temp=36.5 sd_pos=162026 sysload=0.40 cputime=59.728 memavail=717608 print_time=957.202 buffer_time=2.658 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 953.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=705261 bytes_read=336572 bytes_retransmit=9 bytes_invalid=0 send_seq=18139 receive_seq=18139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996686 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=42.5 mcu_temp: temp=36.3 sd_pos=162676 sysload=0.40 cputime=59.804 memavail=717608 print_time=958.379 buffer_time=2.835 print_stall=0 extruder: target=200 temp=200.0 pwm=0.687
Stats 954.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=705952 bytes_read=336966 bytes_retransmit=9 bytes_invalid=0 send_seq=18161 receive_seq=18161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=42.7 mcu_temp: temp=36.6 sd_pos=162871 sysload=0.40 cputime=59.868 memavail=717368 print_time=958.574 buffer_time=2.030 print_stall=0 extruder: target=200 temp=200.0 pwm=0.687
Stats 955.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=707676 bytes_read=337459 bytes_retransmit=9 bytes_invalid=0 send_seq=18197 receive_seq=18197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996700 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=43.2 mcu_temp: temp=36.5 sd_pos=163174 sysload=0.40 cputime=59.941 memavail=717928 print_time=960.681 buffer_time=3.136 print_stall=0 extruder: target=200 temp=200.0 pwm=0.687
Stats 956.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=707838 bytes_read=337832 bytes_retransmit=9 bytes_invalid=0 send_seq=18209 receive_seq=18209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.5 mcu_temp: temp=36.5 sd_pos=163174 sysload=0.37 cputime=60.002 memavail=717928 print_time=960.681 buffer_time=2.135 print_stall=0 extruder: target=200 temp=200.0 pwm=0.687
Stats 957.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=708903 bytes_read=338246 bytes_retransmit=9 bytes_invalid=0 send_seq=18235 receive_seq=18235 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996692 heater_bed: target=60 temp=60.0 pwm=0.480 raspberry_pi: temp=42.7 mcu_temp: temp=36.5 sd_pos=163433 sysload=0.37 cputime=60.071 memavail=717600 print_time=961.646 buffer_time=2.100 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 958.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=711059 bytes_read=338774 bytes_retransmit=9 bytes_invalid=0 send_seq=18278 receive_seq=18278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996689 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=42.7 mcu_temp: temp=36.4 sd_pos=163812 sysload=0.37 cputime=60.145 memavail=717352 print_time=963.765 buffer_time=3.218 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 959.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=711221 bytes_read=339132 bytes_retransmit=9 bytes_invalid=0 send_seq=18290 receive_seq=18290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996690 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=43.0 mcu_temp: temp=36.5 sd_pos=163812 sysload=0.37 cputime=60.206 memavail=717388 print_time=963.765 buffer_time=2.217 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 960.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=713169 bytes_read=339616 bytes_retransmit=9 bytes_invalid=0 send_seq=18330 receive_seq=18330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996699 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=43.1 mcu_temp: temp=36.5 sd_pos=164203 sysload=0.37 cputime=60.276 memavail=717388 print_time=964.875 buffer_time=2.326 print_stall=0 extruder: target=200 temp=200.0 pwm=0.674
Stats 961.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=714579 bytes_read=340118 bytes_retransmit=9 bytes_invalid=0 send_seq=18362 receive_seq=18362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=43.1 mcu_temp: temp=36.7 sd_pos=164398 sysload=0.34 cputime=60.346 memavail=718160 print_time=965.560 buffer_time=2.011 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 962.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=716577 bytes_read=340607 bytes_retransmit=9 bytes_invalid=0 send_seq=18403 receive_seq=18403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996699 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=42.7 mcu_temp: temp=36.5 sd_pos=165027 sysload=0.34 cputime=60.420 memavail=718364 print_time=966.554 buffer_time=2.004 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 963.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=718483 bytes_read=341086 bytes_retransmit=9 bytes_invalid=0 send_seq=18442 receive_seq=18442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=42.9 mcu_temp: temp=36.6 sd_pos=165393 sysload=0.34 cputime=60.492 memavail=718444 print_time=967.659 buffer_time=2.109 print_stall=0 extruder: target=200 temp=199.9 pwm=0.735
Stats 964.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=720952 bytes_read=341658 bytes_retransmit=9 bytes_invalid=0 send_seq=18491 receive_seq=18491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996690 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.2 mcu_temp: temp=36.5 sd_pos=166135 sysload=0.34 cputime=60.575 memavail=718456 print_time=968.894 buffer_time=2.342 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 965.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=722675 bytes_read=342137 bytes_retransmit=9 bytes_invalid=0 send_seq=18530 receive_seq=18530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996685 heater_bed: target=60 temp=60.0 pwm=0.463 raspberry_pi: temp=43.9 mcu_temp: temp=36.6 sd_pos=166496 sysload=0.34 cputime=60.647 memavail=718520 print_time=969.958 buffer_time=2.405 print_stall=0 extruder: target=200 temp=199.9 pwm=0.729
Stats 966.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=724979 bytes_read=342676 bytes_retransmit=9 bytes_invalid=0 send_seq=18578 receive_seq=18578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996679 heater_bed: target=60 temp=60.0 pwm=0.484 raspberry_pi: temp=43.6 mcu_temp: temp=36.5 sd_pos=167276 sysload=0.31 cputime=60.731 memavail=718520 print_time=970.964 buffer_time=2.411 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 967.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=726273 bytes_read=343148 bytes_retransmit=9 bytes_invalid=0 send_seq=18607 receive_seq=18607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996677 heater_bed: target=60 temp=60.0 pwm=0.417 raspberry_pi: temp=43.5 mcu_temp: temp=36.5 sd_pos=167596 sysload=0.31 cputime=60.800 memavail=718520 print_time=971.727 buffer_time=2.173 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 968.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=727447 bytes_read=343572 bytes_retransmit=9 bytes_invalid=0 send_seq=18635 receive_seq=18635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996676 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=43.2 mcu_temp: temp=36.8 sd_pos=167889 sysload=0.31 cputime=60.868 memavail=718524 print_time=972.569 buffer_time=2.014 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 969.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=729975 bytes_read=344099 bytes_retransmit=9 bytes_invalid=0 send_seq=18685 receive_seq=18685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996672 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.6 mcu_temp: temp=36.6 sd_pos=168670 sysload=0.31 cputime=60.943 memavail=717816 print_time=973.697 buffer_time=2.141 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 970.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=732228 bytes_read=344641 bytes_retransmit=9 bytes_invalid=0 send_seq=18730 receive_seq=18730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996678 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.8 mcu_temp: temp=36.6 sd_pos=169157 sysload=0.31 cputime=61.017 memavail=717816 print_time=975.344 buffer_time=2.789 print_stall=0 extruder: target=200 temp=200.2 pwm=0.634
Stats 971.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=732919 bytes_read=345040 bytes_retransmit=9 bytes_invalid=0 send_seq=18750 receive_seq=18750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996674 heater_bed: target=60 temp=60.0 pwm=0.451 raspberry_pi: temp=43.6 mcu_temp: temp=36.7 sd_pos=169351 sysload=0.29 cputime=61.081 memavail=717564 print_time=975.555 buffer_time=1.999 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 972.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=735351 bytes_read=345559 bytes_retransmit=9 bytes_invalid=0 send_seq=18797 receive_seq=18797 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.451 raspberry_pi: temp=43.9 mcu_temp: temp=36.7 sd_pos=170035 sysload=0.29 cputime=61.152 memavail=717844 print_time=976.731 buffer_time=2.174 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 973.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=737011 bytes_read=346061 bytes_retransmit=9 bytes_invalid=0 send_seq=18832 receive_seq=18832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=167996666 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.5 mcu_temp: temp=36.5 sd_pos=170343 sysload=0.29 cputime=61.226 memavail=717592 print_time=978.841 buffer_time=3.283 print_stall=0 extruder: target=200 temp=200.1 pwm=0.702
Stats 974.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=737211 bytes_read=346400 bytes_retransmit=9 bytes_invalid=0 send_seq=18843 receive_seq=18843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996666 heater_bed: target=60 temp=60.0 pwm=0.460 raspberry_pi: temp=43.6 mcu_temp: temp=36.6 sd_pos=170343 sysload=0.29 cputime=61.287 memavail=717288 print_time=978.841 buffer_time=2.282 print_stall=0 extruder: target=200 temp=200.1 pwm=0.702
Stats 975.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=738219 bytes_read=346829 bytes_retransmit=9 bytes_invalid=0 send_seq=18869 receive_seq=18869 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996665 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=43.5 mcu_temp: temp=36.6 sd_pos=170601 sysload=0.29 cputime=61.358 memavail=717156 print_time=979.812 buffer_time=2.252 print_stall=0 extruder: target=200 temp=200.1 pwm=0.702
Stats 976.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=740337 bytes_read=347366 bytes_retransmit=9 bytes_invalid=0 send_seq=18911 receive_seq=18911 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996662 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=43.2 mcu_temp: temp=36.5 sd_pos=170985 sysload=0.27 cputime=61.431 memavail=717436 print_time=981.927 buffer_time=3.366 print_stall=0 extruder: target=200 temp=200.0 pwm=0.702
Stats 977.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=740515 bytes_read=347705 bytes_retransmit=9 bytes_invalid=0 send_seq=18922 receive_seq=18922 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996662 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=43.4 mcu_temp: temp=36.5 sd_pos=170985 sysload=0.27 cputime=61.490 memavail=717436 print_time=981.927 buffer_time=2.365 print_stall=0 extruder: target=200 temp=200.0 pwm=0.702
Stats 978.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=742541 bytes_read=348224 bytes_retransmit=9 bytes_invalid=0 send_seq=18966 receive_seq=18966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996660 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=43.2 mcu_temp: temp=36.5 sd_pos=171377 sysload=0.27 cputime=61.563 memavail=717688 print_time=983.056 buffer_time=2.494 print_stall=0 extruder: target=200 temp=200.0 pwm=0.689
Stats 979.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=743951 bytes_read=348686 bytes_retransmit=9 bytes_invalid=0 send_seq=18996 receive_seq=18996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=43.5 mcu_temp: temp=36.6 sd_pos=171576 sysload=0.27 cputime=61.629 memavail=717464 print_time=983.741 buffer_time=2.179 print_stall=0 extruder: target=200 temp=200.0 pwm=0.689
Stats 980.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=745941 bytes_read=349175 bytes_retransmit=9 bytes_invalid=0 send_seq=19037 receive_seq=19037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=167996653 heater_bed: target=60 temp=60.0 pwm=0.454 raspberry_pi: temp=43.6 mcu_temp: temp=36.5 sd_pos=172204 sysload=0.27 cputime=61.704 memavail=717464 print_time=984.744 buffer_time=2.181 print_stall=0 extruder: target=200 temp=200.0 pwm=0.689
Stats 981.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=747963 bytes_read=349699 bytes_retransmit=9 bytes_invalid=0 send_seq=19079 receive_seq=19079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996650 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=42.8 mcu_temp: temp=36.6 sd_pos=172574 sysload=0.24 cputime=61.776 memavail=717240 print_time=985.869 buffer_time=2.304 print_stall=0 extruder: target=200 temp=200.1 pwm=0.689
Stats 982.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=749937 bytes_read=350216 bytes_retransmit=9 bytes_invalid=0 send_seq=19120 receive_seq=19120 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996647 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.2 mcu_temp: temp=36.6 sd_pos=173144 sysload=0.24 cputime=61.849 memavail=717240 print_time=986.635 buffer_time=2.070 print_stall=0 extruder: target=200 temp=200.0 pwm=0.706
Stats 983.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=751998 bytes_read=350715 bytes_retransmit=9 bytes_invalid=0 send_seq=19163 receive_seq=19163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996647 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=42.8 mcu_temp: temp=36.6 sd_pos=173697 sysload=0.24 cputime=61.921 memavail=717536 print_time=988.146 buffer_time=2.580 print_stall=0 extruder: target=200 temp=199.9 pwm=0.706
Stats 984.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=754464 bytes_read=351254 bytes_retransmit=9 bytes_invalid=0 send_seq=19211 receive_seq=19211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996647 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.0 mcu_temp: temp=36.7 sd_pos=174508 sysload=0.24 cputime=61.995 memavail=717540 print_time=989.205 buffer_time=2.638 print_stall=0 extruder: target=200 temp=199.9 pwm=0.706
Stats 985.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=755712 bytes_read=351706 bytes_retransmit=9 bytes_invalid=0 send_seq=19239 receive_seq=19239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=167996647 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.2 mcu_temp: temp=36.7 sd_pos=174830 sysload=0.24 cputime=62.069 memavail=718332 print_time=989.972 buffer_time=2.404 print_stall=0 extruder: target=200 temp=199.9 pwm=0.706
Stats 986.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=756890 bytes_read=352150 bytes_retransmit=9 bytes_invalid=0 send_seq=19268 receive_seq=19268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996650 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=43.0 mcu_temp: temp=36.7 sd_pos=175130 sysload=0.30 cputime=62.137 memavail=718332 print_time=990.806 buffer_time=2.237 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 987.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=759384 bytes_read=352699 bytes_retransmit=9 bytes_invalid=0 send_seq=19318 receive_seq=19318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=42.7 mcu_temp: temp=36.6 sd_pos=175870 sysload=0.30 cputime=62.216 memavail=718108 print_time=991.937 buffer_time=2.367 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 988.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=760717 bytes_read=353161 bytes_retransmit=9 bytes_invalid=0 send_seq=19348 receive_seq=19348 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996661 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=42.9 mcu_temp: temp=36.6 sd_pos=176160 sysload=0.30 cputime=62.285 memavail=718316 print_time=992.735 buffer_time=2.165 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 989.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=761844 bytes_read=353575 bytes_retransmit=9 bytes_invalid=0 send_seq=19374 receive_seq=19374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.2 mcu_temp: temp=36.7 sd_pos=176360 sysload=0.30 cputime=62.350 memavail=718080 print_time=993.590 buffer_time=2.019 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 990.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=764255 bytes_read=354119 bytes_retransmit=9 bytes_invalid=0 send_seq=19423 receive_seq=19423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996672 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=43.0 mcu_temp: temp=36.7 sd_pos=177008 sysload=0.30 cputime=62.428 memavail=718140 print_time=994.773 buffer_time=2.200 print_stall=0 extruder: target=200 temp=200.0 pwm=0.661
Stats 991.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=765543 bytes_read=354596 bytes_retransmit=9 bytes_invalid=0 send_seq=19453 receive_seq=19453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996680 heater_bed: target=60 temp=60.0 pwm=0.446 raspberry_pi: temp=42.9 mcu_temp: temp=36.7 sd_pos=177281 sysload=0.28 cputime=62.499 memavail=718140 print_time=995.600 buffer_time=2.026 print_stall=0 extruder: target=200 temp=200.0 pwm=0.661
Stats 992.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=766596 bytes_read=355010 bytes_retransmit=9 bytes_invalid=0 send_seq=19479 receive_seq=19479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996677 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=42.7 mcu_temp: temp=36.6 sd_pos=177512 sysload=0.28 cputime=62.567 memavail=717892 print_time=997.080 buffer_time=2.505 print_stall=0 extruder: target=200 temp=200.1 pwm=0.661
Stats 993.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=767654 bytes_read=355444 bytes_retransmit=9 bytes_invalid=0 send_seq=19506 receive_seq=19506 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996674 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=42.9 mcu_temp: temp=36.7 sd_pos=177736 sysload=0.28 cputime=62.637 memavail=718184 print_time=998.051 buffer_time=2.476 print_stall=0 extruder: target=200 temp=200.1 pwm=0.661
Stats 994.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=769773 bytes_read=355968 bytes_retransmit=9 bytes_invalid=0 send_seq=19549 receive_seq=19549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996671 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=43.1 mcu_temp: temp=36.6 sd_pos=178122 sysload=0.28 cputime=62.708 memavail=718384 print_time=1000.161 buffer_time=3.585 print_stall=0 extruder: target=200 temp=200.2 pwm=0.628
Stats 995.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=769943 bytes_read=356301 bytes_retransmit=9 bytes_invalid=0 send_seq=19561 receive_seq=19561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996668 heater_bed: target=60 temp=60.0 pwm=0.445 raspberry_pi: temp=43.2 mcu_temp: temp=36.7 sd_pos=178122 sysload=0.28 cputime=62.775 memavail=720008 print_time=1000.161 buffer_time=2.585 print_stall=0 extruder: target=200 temp=200.1 pwm=0.628
Stats 996.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=771275 bytes_read=356766 bytes_retransmit=9 bytes_invalid=0 send_seq=19592 receive_seq=19592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996666 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=42.9 mcu_temp: temp=36.6 sd_pos=178366 sysload=0.34 cputime=62.842 memavail=719768 print_time=1000.729 buffer_time=2.152 print_stall=0 extruder: target=200 temp=200.1 pwm=0.679
Stats 997.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=773503 bytes_read=357308 bytes_retransmit=9 bytes_invalid=0 send_seq=19638 receive_seq=19638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996673 heater_bed: target=60 temp=60.0 pwm=0.334 raspberry_pi: temp=43.0 mcu_temp: temp=36.6 sd_pos=178749 sysload=0.34 cputime=62.915 memavail=719768 print_time=1002.078 buffer_time=2.500 print_stall=0 extruder: target=200 temp=200.2 pwm=0.626
Stats 998.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=774519 bytes_read=357717 bytes_retransmit=9 bytes_invalid=0 send_seq=19663 receive_seq=19663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996671 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=42.9 mcu_temp: temp=36.6 sd_pos=178989 sysload=0.34 cputime=62.983 memavail=720028 print_time=1002.626 buffer_time=2.048 print_stall=0 extruder: target=200 temp=200.2 pwm=0.626
Stats 999.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=777568 bytes_read=358301 bytes_retransmit=9 bytes_invalid=0 send_seq=19720 receive_seq=19720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=167996668 heater_bed: target=60 temp=60.0 pwm=0.538 raspberry_pi: temp=42.8 mcu_temp: temp=36.6 sd_pos=179722 sysload=0.34 cputime=63.062 memavail=719804 print_time=1004.180 buffer_time=2.602 print_stall=0 extruder: target=200 temp=200.2 pwm=0.626
Stats 1000.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=779696 bytes_read=358833 bytes_retransmit=9 bytes_invalid=0 send_seq=19764 receive_seq=19764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996667 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=42.7 mcu_temp: temp=36.8 sd_pos=180289 sysload=0.34 cputime=63.138 memavail=719564 print_time=1005.001 buffer_time=2.422 print_stall=0 extruder: target=200 temp=200.1 pwm=0.693
Stats 1001.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=782068 bytes_read=359367 bytes_retransmit=9 bytes_invalid=0 send_seq=19811 receive_seq=19811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996668 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=43.2 mcu_temp: temp=36.8 sd_pos=180841 sysload=0.47 cputime=63.216 memavail=719324 print_time=1006.573 buffer_time=2.994 print_stall=0 extruder: target=200 temp=200.0 pwm=0.693
Stats 1002.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=782575 bytes_read=359751 bytes_retransmit=9 bytes_invalid=0 send_seq=19828 receive_seq=19828 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=167996668 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=42.9 mcu_temp: temp=36.9 sd_pos=181003 sysload=0.47 cputime=63.281 memavail=719956 print_time=1006.691 buffer_time=2.111 print_stall=0 extruder: target=200 temp=200.0 pwm=0.693
Stats 1003.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=785057 bytes_read=360308 bytes_retransmit=9 bytes_invalid=0 send_seq=19877 receive_seq=19877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996667 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=42.6 mcu_temp: temp=36.9 sd_pos=181868 sysload=0.47 cputime=63.357 memavail=719956 print_time=1007.752 buffer_time=2.171 print_stall=0 extruder: target=200 temp=199.9 pwm=0.744
Stats 1004.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=786820 bytes_read=360782 bytes_retransmit=9 bytes_invalid=0 send_seq=19915 receive_seq=19915 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996667 heater_bed: target=60 temp=60.0 pwm=0.417 raspberry_pi: temp=42.9 mcu_temp: temp=36.6 sd_pos=182258 sysload=0.47 cputime=63.427 memavail=720248 print_time=1009.177 buffer_time=2.595 print_stall=0 extruder: target=200 temp=199.9 pwm=0.744
Stats 1005.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=789287 bytes_read=361331 bytes_retransmit=9 bytes_invalid=0 send_seq=19965 receive_seq=19965 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=167996659 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.3 mcu_temp: temp=36.6 sd_pos=183005 sysload=0.47 cputime=63.505 memavail=719792 print_time=1010.294 buffer_time=2.712 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 1006.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=790609 bytes_read=361805 bytes_retransmit=9 bytes_invalid=0 send_seq=19994 receive_seq=19994 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996656 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.2 mcu_temp: temp=36.7 sd_pos=183291 sysload=0.67 cputime=63.580 memavail=720028 print_time=1011.096 buffer_time=2.513 print_stall=0 extruder: target=200 temp=200.0 pwm=0.624
Stats 1007.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=791792 bytes_read=362229 bytes_retransmit=9 bytes_invalid=0 send_seq=20022 receive_seq=20022 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996655 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=43.4 mcu_temp: temp=36.7 sd_pos=183458 sysload=0.67 cputime=63.649 memavail=720080 print_time=1011.953 buffer_time=2.369 print_stall=0 extruder: target=200 temp=200.1 pwm=0.624
Stats 1008.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=794143 bytes_read=362763 bytes_retransmit=9 bytes_invalid=0 send_seq=20069 receive_seq=20069 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996654 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=43.0 mcu_temp: temp=36.8 sd_pos=184075 sysload=0.67 cputime=63.726 memavail=720492 print_time=1013.123 buffer_time=2.539 print_stall=0 extruder: target=200 temp=200.1 pwm=0.624
Stats 1009.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=795407 bytes_read=363225 bytes_retransmit=9 bytes_invalid=0 send_seq=20099 receive_seq=20099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996651 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=42.7 mcu_temp: temp=36.8 sd_pos=184349 sysload=0.67 cputime=63.799 memavail=720608 print_time=1013.950 buffer_time=2.365 print_stall=0 extruder: target=200 temp=200.2 pwm=0.624
Stats 1010.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=796506 bytes_read=363644 bytes_retransmit=9 bytes_invalid=0 send_seq=20126 receive_seq=20126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996648 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=42.9 mcu_temp: temp=36.9 sd_pos=184613 sysload=0.67 cputime=63.874 memavail=719864 print_time=1015.433 buffer_time=2.846 print_stall=0 extruder: target=200 temp=200.1 pwm=0.624
Stats 1011.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=797598 bytes_read=364098 bytes_retransmit=9 bytes_invalid=0 send_seq=20154 receive_seq=20154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=43.6 mcu_temp: temp=36.7 sd_pos=184871 sysload=0.78 cputime=63.948 memavail=719864 print_time=1016.414 buffer_time=2.827 print_stall=0 extruder: target=200 temp=200.2 pwm=0.664
Stats 1012.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=798481 bytes_read=364530 bytes_retransmit=9 bytes_invalid=0 send_seq=20178 receive_seq=20178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=42.9 mcu_temp: temp=36.7 sd_pos=185066 sysload=0.78 cputime=64.017 memavail=720116 print_time=1016.896 buffer_time=2.308 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 1013.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=799881 bytes_read=364964 bytes_retransmit=9 bytes_invalid=0 send_seq=20208 receive_seq=20208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.2 mcu_temp: temp=36.8 sd_pos=185224 sysload=0.78 cputime=64.090 memavail=720620 print_time=1018.520 buffer_time=2.931 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 1014.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=800894 bytes_read=365419 bytes_retransmit=9 bytes_invalid=0 send_seq=20237 receive_seq=20237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996654 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.3 mcu_temp: temp=36.8 sd_pos=185447 sysload=0.78 cputime=64.163 memavail=720624 print_time=1018.964 buffer_time=2.374 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 1015.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=802214 bytes_read=365881 bytes_retransmit=9 bytes_invalid=0 send_seq=20267 receive_seq=20267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.0 mcu_temp: temp=36.7 sd_pos=185547 sysload=0.78 cputime=64.240 memavail=719904 print_time=1019.706 buffer_time=2.116 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 1016.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=804329 bytes_read=366395 bytes_retransmit=9 bytes_invalid=0 send_seq=20310 receive_seq=20310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996656 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.6 mcu_temp: temp=36.7 sd_pos=186270 sysload=0.96 cputime=64.319 memavail=719904 print_time=1020.632 buffer_time=2.041 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 1017.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=806979 bytes_read=366889 bytes_retransmit=9 bytes_invalid=0 send_seq=20361 receive_seq=20349 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=235 upcoming_bytes=0 freq=167996654 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.1 mcu_temp: temp=36.9 sd_pos=186929 sysload=0.96 cputime=64.401 memavail=719916 print_time=1022.133 buffer_time=2.541 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1018.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=808815 bytes_read=367446 bytes_retransmit=9 bytes_invalid=0 send_seq=20398 receive_seq=20398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996662 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=42.7 mcu_temp: temp=36.9 sd_pos=187438 sysload=0.96 cputime=64.476 memavail=720420 print_time=1022.846 buffer_time=2.253 print_stall=0 extruder: target=200 temp=199.8 pwm=0.696
Stats 1019.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=811098 bytes_read=367965 bytes_retransmit=9 bytes_invalid=0 send_seq=20445 receive_seq=20445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996660 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=42.9 mcu_temp: temp=36.8 sd_pos=187821 sysload=0.96 cputime=64.558 memavail=720368 print_time=1024.350 buffer_time=2.756 print_stall=0 extruder: target=200 temp=199.8 pwm=0.696
Stats 1020.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=813350 bytes_read=368491 bytes_retransmit=9 bytes_invalid=0 send_seq=20492 receive_seq=20492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996665 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=42.9 mcu_temp: temp=36.7 sd_pos=188595 sysload=0.96 cputime=64.642 memavail=719684 print_time=1025.332 buffer_time=2.737 print_stall=0 extruder: target=200 temp=199.8 pwm=0.730
Stats 1021.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=814583 bytes_read=368953 bytes_retransmit=9 bytes_invalid=0 send_seq=20521 receive_seq=20521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=167996662 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.5 mcu_temp: temp=36.9 sd_pos=188881 sysload=1.04 cputime=64.716 memavail=719936 print_time=1026.111 buffer_time=2.516 print_stall=0 extruder: target=200 temp=199.8 pwm=0.730
Stats 1022.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=815759 bytes_read=369367 bytes_retransmit=9 bytes_invalid=0 send_seq=20547 receive_seq=20547 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996659 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=42.7 mcu_temp: temp=36.7 sd_pos=189178 sysload=1.04 cputime=64.790 memavail=720692 print_time=1026.945 buffer_time=2.349 print_stall=0 extruder: target=200 temp=199.8 pwm=0.730
Stats 1023.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=818277 bytes_read=369916 bytes_retransmit=9 bytes_invalid=0 send_seq=20597 receive_seq=20597 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=43.6 mcu_temp: temp=37.0 sd_pos=189953 sysload=1.04 cputime=64.870 memavail=720708 print_time=1028.068 buffer_time=2.471 print_stall=0 extruder: target=200 temp=199.8 pwm=0.677
Stats 1024.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=819569 bytes_read=370373 bytes_retransmit=9 bytes_invalid=0 send_seq=20626 receive_seq=20626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996654 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=42.9 mcu_temp: temp=36.8 sd_pos=190240 sysload=1.04 cputime=64.942 memavail=720704 print_time=1028.870 buffer_time=2.272 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 1025.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=820703 bytes_read=370792 bytes_retransmit=9 bytes_invalid=0 send_seq=20653 receive_seq=20653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=43.2 mcu_temp: temp=36.8 sd_pos=190440 sysload=1.04 cputime=65.014 memavail=720156 print_time=1029.725 buffer_time=2.126 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 1026.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=823076 bytes_read=371341 bytes_retransmit=9 bytes_invalid=0 send_seq=20700 receive_seq=20700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996656 heater_bed: target=60 temp=60.0 pwm=0.447 raspberry_pi: temp=43.1 mcu_temp: temp=37.0 sd_pos=191055 sysload=1.12 cputime=65.088 memavail=720692 print_time=1030.900 buffer_time=2.300 print_stall=0 extruder: target=200 temp=200.1 pwm=0.677
Stats 1027.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=824373 bytes_read=371803 bytes_retransmit=9 bytes_invalid=0 send_seq=20730 receive_seq=20730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996653 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.0 mcu_temp: temp=36.9 sd_pos=191325 sysload=1.12 cputime=65.161 memavail=720692 print_time=1031.726 buffer_time=2.126 print_stall=0 extruder: target=200 temp=200.1 pwm=0.628
Stats 1028.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=825419 bytes_read=372207 bytes_retransmit=9 bytes_invalid=0 send_seq=20754 receive_seq=20754 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996653 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.6 mcu_temp: temp=36.9 sd_pos=191555 sysload=1.12 cputime=65.230 memavail=720744 print_time=1033.206 buffer_time=2.605 print_stall=0 extruder: target=200 temp=200.2 pwm=0.628
Stats 1029.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=826501 bytes_read=372636 bytes_retransmit=9 bytes_invalid=0 send_seq=20780 receive_seq=20780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996653 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.6 mcu_temp: temp=36.9 sd_pos=191815 sysload=1.12 cputime=65.302 memavail=720508 print_time=1034.192 buffer_time=2.589 print_stall=0 extruder: target=200 temp=200.3 pwm=0.628
Stats 1030.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=827397 bytes_read=373063 bytes_retransmit=9 bytes_invalid=0 send_seq=20803 receive_seq=20803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996655 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.6 mcu_temp: temp=36.8 sd_pos=192038 sysload=1.12 cputime=65.370 memavail=720004 print_time=1034.672 buffer_time=2.068 print_stall=0 extruder: target=200 temp=200.2 pwm=0.628
Stats 1031.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=828798 bytes_read=373522 bytes_retransmit=9 bytes_invalid=0 send_seq=20835 receive_seq=20835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996654 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=43.5 mcu_temp: temp=36.9 sd_pos=192196 sysload=1.11 cputime=65.441 memavail=720284 print_time=1036.302 buffer_time=2.698 print_stall=0 extruder: target=200 temp=200.2 pwm=0.678
Stats 1032.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=830001 bytes_read=373961 bytes_retransmit=9 bytes_invalid=0 send_seq=20863 receive_seq=20863 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996708 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.1 mcu_temp: temp=36.9 sd_pos=192515 sysload=1.11 cputime=65.511 memavail=720044 print_time=1036.831 buffer_time=2.225 print_stall=0 extruder: target=200 temp=200.2 pwm=0.678
Stats 1033.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=832375 bytes_read=374513 bytes_retransmit=9 bytes_invalid=0 send_seq=20911 receive_seq=20911 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996702 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=43.1 mcu_temp: temp=37.0 sd_pos=192769 sysload=1.11 cputime=65.585 memavail=720576 print_time=1038.296 buffer_time=2.691 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 1034.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=833553 bytes_read=374937 bytes_retransmit=9 bytes_invalid=0 send_seq=20939 receive_seq=20939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996698 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=43.4 mcu_temp: temp=37.1 sd_pos=193124 sysload=1.11 cputime=65.659 memavail=720336 print_time=1038.812 buffer_time=2.206 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 1035.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=835650 bytes_read=375446 bytes_retransmit=9 bytes_invalid=0 send_seq=20981 receive_seq=20981 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996699 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=43.6 mcu_temp: temp=36.9 sd_pos=193481 sysload=1.11 cputime=65.733 memavail=720320 print_time=1039.851 buffer_time=2.244 print_stall=0 extruder: target=200 temp=200.0 pwm=0.706
Stats 1036.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=837694 bytes_read=375988 bytes_retransmit=9 bytes_invalid=0 send_seq=21024 receive_seq=21024 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=43.6 mcu_temp: temp=37.1 sd_pos=194143 sysload=1.02 cputime=65.812 memavail=720384 print_time=1040.710 buffer_time=2.103 print_stall=0 extruder: target=200 temp=199.9 pwm=0.706
Stats 1037.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=840330 bytes_read=376532 bytes_retransmit=9 bytes_invalid=0 send_seq=21076 receive_seq=21076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996691 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.6 mcu_temp: temp=36.9 sd_pos=194732 sysload=1.02 cputime=65.890 memavail=720388 print_time=1042.544 buffer_time=2.935 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1038.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=840976 bytes_read=376940 bytes_retransmit=9 bytes_invalid=0 send_seq=21095 receive_seq=21095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996687 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.5 mcu_temp: temp=36.9 sd_pos=194894 sysload=1.02 cputime=65.959 memavail=720140 print_time=1042.719 buffer_time=2.110 print_stall=0 extruder: target=200 temp=199.7 pwm=0.706
Stats 1039.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=843392 bytes_read=377473 bytes_retransmit=9 bytes_invalid=0 send_seq=21142 receive_seq=21142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=167996684 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.1 mcu_temp: temp=36.9 sd_pos=195740 sysload=1.02 cputime=66.035 memavail=719888 print_time=1043.770 buffer_time=2.160 print_stall=0 extruder: target=200 temp=199.8 pwm=0.671
Stats 1040.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=845216 bytes_read=377937 bytes_retransmit=9 bytes_invalid=0 send_seq=21178 receive_seq=21178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996680 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=43.7 mcu_temp: temp=37.0 sd_pos=196092 sysload=1.02 cputime=66.106 memavail=719888 print_time=1045.215 buffer_time=2.604 print_stall=0 extruder: target=200 temp=199.9 pwm=0.671
Stats 1041.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=847658 bytes_read=378505 bytes_retransmit=9 bytes_invalid=0 send_seq=21226 receive_seq=21226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996679 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=43.8 mcu_temp: temp=37.1 sd_pos=196874 sysload=1.02 cputime=66.191 memavail=719644 print_time=1046.297 buffer_time=2.685 print_stall=0 extruder: target=200 temp=199.9 pwm=0.671
Stats 1042.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=848953 bytes_read=378948 bytes_retransmit=9 bytes_invalid=0 send_seq=21255 receive_seq=21255 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996680 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=44.2 mcu_temp: temp=36.9 sd_pos=197125 sysload=1.02 cputime=66.262 memavail=720476 print_time=1047.119 buffer_time=2.508 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 1043.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=850093 bytes_read=379367 bytes_retransmit=9 bytes_invalid=0 send_seq=21282 receive_seq=21282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996680 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=44.4 mcu_temp: temp=36.9 sd_pos=197291 sysload=1.02 cputime=66.330 memavail=720528 print_time=1047.977 buffer_time=2.364 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 1044.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=852497 bytes_read=379920 bytes_retransmit=9 bytes_invalid=0 send_seq=21330 receive_seq=21330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996675 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=43.6 mcu_temp: temp=37.1 sd_pos=197968 sysload=1.02 cputime=66.409 memavail=720528 print_time=1049.142 buffer_time=2.529 print_stall=0 extruder: target=200 temp=200.1 pwm=0.622
Stats 1045.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=853768 bytes_read=380366 bytes_retransmit=9 bytes_invalid=0 send_seq=21360 receive_seq=21360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996724 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.5 mcu_temp: temp=36.9 sd_pos=198205 sysload=1.02 cputime=66.479 memavail=720492 print_time=1049.976 buffer_time=2.363 print_stall=0 extruder: target=200 temp=200.1 pwm=0.622
Stats 1046.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=854829 bytes_read=380785 bytes_retransmit=9 bytes_invalid=0 send_seq=21386 receive_seq=21386 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996724 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.1 mcu_temp: temp=37.0 sd_pos=198435 sysload=0.94 cputime=66.546 memavail=719764 print_time=1051.456 buffer_time=2.842 print_stall=0 extruder: target=200 temp=200.1 pwm=0.675
Stats 1047.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=855827 bytes_read=381216 bytes_retransmit=9 bytes_invalid=0 send_seq=21411 receive_seq=21411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996716 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.7 mcu_temp: temp=37.0 sd_pos=198694 sysload=0.94 cputime=66.616 memavail=719312 print_time=1052.445 buffer_time=2.830 print_stall=0 extruder: target=200 temp=200.1 pwm=0.675
Stats 1048.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=856752 bytes_read=381629 bytes_retransmit=9 bytes_invalid=0 send_seq=21434 receive_seq=21434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996710 heater_bed: target=60 temp=60.0 pwm=0.453 raspberry_pi: temp=43.6 mcu_temp: temp=37.0 sd_pos=198886 sysload=0.94 cputime=66.683 memavail=719512 print_time=1052.914 buffer_time=2.298 print_stall=0 extruder: target=200 temp=200.0 pwm=0.675
Stats 1049.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=858164 bytes_read=382078 bytes_retransmit=9 bytes_invalid=0 send_seq=21467 receive_seq=21467 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996707 heater_bed: target=60 temp=60.0 pwm=0.441 raspberry_pi: temp=43.7 mcu_temp: temp=37.0 sd_pos=199037 sysload=0.94 cputime=66.756 memavail=719596 print_time=1054.552 buffer_time=2.935 print_stall=0 extruder: target=200 temp=200.0 pwm=0.675
Stats 1050.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=859256 bytes_read=382531 bytes_retransmit=9 bytes_invalid=0 send_seq=21495 receive_seq=21495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996705 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=44.0 mcu_temp: temp=37.1 sd_pos=199357 sysload=0.94 cputime=66.824 memavail=719344 print_time=1055.050 buffer_time=2.432 print_stall=0 extruder: target=200 temp=200.0 pwm=0.700
Stats 1051.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=860462 bytes_read=382984 bytes_retransmit=9 bytes_invalid=0 send_seq=21523 receive_seq=21523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996699 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=44.0 mcu_temp: temp=37.1 sd_pos=199493 sysload=0.86 cputime=66.893 memavail=719120 print_time=1055.752 buffer_time=2.133 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 1052.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=862740 bytes_read=383498 bytes_retransmit=9 bytes_invalid=0 send_seq=21569 receive_seq=21569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=167996705 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=44.3 mcu_temp: temp=37.1 sd_pos=199990 sysload=0.86 cputime=66.963 memavail=718872 print_time=1057.009 buffer_time=2.390 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 1053.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=864754 bytes_read=384016 bytes_retransmit=9 bytes_invalid=0 send_seq=21610 receive_seq=21610 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996699 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=43.6 mcu_temp: temp=37.0 sd_pos=200315 sysload=0.86 cputime=67.037 memavail=718380 print_time=1058.011 buffer_time=2.390 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 1054.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=866654 bytes_read=384524 bytes_retransmit=9 bytes_invalid=0 send_seq=21652 receive_seq=21652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.6 mcu_temp: temp=36.9 sd_pos=200972 sysload=0.86 cputime=67.112 memavail=718852 print_time=1058.808 buffer_time=2.187 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 1055.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=868251 bytes_read=384978 bytes_retransmit=9 bytes_invalid=0 send_seq=21686 receive_seq=21686 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996688 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.8 mcu_temp: temp=36.9 sd_pos=201200 sysload=0.86 cputime=67.185 memavail=719176 print_time=1059.628 buffer_time=2.007 print_stall=0 extruder: target=200 temp=199.8 pwm=0.689
Stats 1056.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=869871 bytes_read=385492 bytes_retransmit=9 bytes_invalid=0 send_seq=21723 receive_seq=21723 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996685 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=43.2 mcu_temp: temp=36.9 sd_pos=201564 sysload=0.79 cputime=67.262 memavail=719204 print_time=1060.694 buffer_time=2.072 print_stall=0 extruder: target=200 temp=199.8 pwm=0.756
Stats 1057.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=872159 bytes_read=386030 bytes_retransmit=9 bytes_invalid=0 send_seq=21771 receive_seq=21771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996683 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.3 mcu_temp: temp=37.1 sd_pos=202409 sysload=0.79 cputime=67.337 memavail=718964 print_time=1061.673 buffer_time=2.051 print_stall=0 extruder: target=200 temp=199.8 pwm=0.693
Stats 1058.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=874456 bytes_read=386544 bytes_retransmit=9 bytes_invalid=0 send_seq=21817 receive_seq=21817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996685 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.0 mcu_temp: temp=36.9 sd_pos=202953 sysload=0.79 cputime=67.413 memavail=718964 print_time=1063.319 buffer_time=2.696 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 1059.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=876960 bytes_read=387102 bytes_retransmit=9 bytes_invalid=0 send_seq=21866 receive_seq=21866 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996680 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.3 mcu_temp: temp=37.2 sd_pos=203799 sysload=0.79 cputime=67.487 memavail=718964 print_time=1064.430 buffer_time=2.806 print_stall=0 extruder: target=200 temp=200.0 pwm=0.624
Stats 1060.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=878264 bytes_read=387545 bytes_retransmit=9 bytes_invalid=0 send_seq=21895 receive_seq=21895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=167996678 heater_bed: target=60 temp=60.0 pwm=0.439 raspberry_pi: temp=43.0 mcu_temp: temp=37.1 sd_pos=204020 sysload=0.79 cputime=67.556 memavail=718484 print_time=1065.221 buffer_time=2.597 print_stall=0 extruder: target=200 temp=200.1 pwm=0.624
Stats 1061.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=879448 bytes_read=387984 bytes_retransmit=9 bytes_invalid=0 send_seq=21923 receive_seq=21923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996672 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.5 mcu_temp: temp=37.3 sd_pos=204218 sysload=0.97 cputime=67.627 memavail=717980 print_time=1066.086 buffer_time=2.460 print_stall=0 extruder: target=200 temp=200.2 pwm=0.624
Stats 1062.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=882033 bytes_read=388547 bytes_retransmit=9 bytes_invalid=0 send_seq=21973 receive_seq=21973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996675 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=43.2 mcu_temp: temp=37.0 sd_pos=204962 sysload=0.97 cputime=67.700 memavail=718200 print_time=1067.327 buffer_time=2.702 print_stall=0 extruder: target=200 temp=200.2 pwm=0.624
Stats 1063.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=883115 bytes_read=388980 bytes_retransmit=9 bytes_invalid=0 send_seq=22000 receive_seq=22000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996671 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=43.2 mcu_temp: temp=37.1 sd_pos=205167 sysload=0.97 cputime=67.766 memavail=718244 print_time=1068.083 buffer_time=2.457 print_stall=0 extruder: target=200 temp=200.2 pwm=0.643
Stats 1064.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=884197 bytes_read=389399 bytes_retransmit=9 bytes_invalid=0 send_seq=22027 receive_seq=22027 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996667 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=43.2 mcu_temp: temp=37.0 sd_pos=205398 sysload=0.97 cputime=67.832 memavail=718004 print_time=1069.563 buffer_time=2.936 print_stall=0 extruder: target=200 temp=200.2 pwm=0.643
Stats 1065.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=885285 bytes_read=389852 bytes_retransmit=9 bytes_invalid=0 send_seq=22055 receive_seq=22055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=3 upcoming_bytes=0 freq=167996664 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=43.6 mcu_temp: temp=37.2 sd_pos=205623 sysload=0.97 cputime=67.901 memavail=717500 print_time=1070.551 buffer_time=2.923 print_stall=0 extruder: target=200 temp=200.2 pwm=0.643
Stats 1066.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=886217 bytes_read=390285 bytes_retransmit=9 bytes_invalid=0 send_seq=22079 receive_seq=22079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996659 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=43.2 mcu_temp: temp=37.0 sd_pos=205883 sysload=0.89 cputime=67.966 memavail=717004 print_time=1071.019 buffer_time=2.391 print_stall=0 extruder: target=200 temp=200.1 pwm=0.643
Stats 1067.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=887650 bytes_read=390729 bytes_retransmit=9 bytes_invalid=0 send_seq=22111 receive_seq=22111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.0 mcu_temp: temp=37.1 sd_pos=206036 sysload=0.89 cputime=68.032 memavail=717044 print_time=1072.660 buffer_time=3.031 print_stall=0 extruder: target=200 temp=200.1 pwm=0.703
Stats 1068.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=887823 bytes_read=391102 bytes_retransmit=9 bytes_invalid=0 send_seq=22123 receive_seq=22123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996668 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=43.3 mcu_temp: temp=37.1 sd_pos=206036 sysload=0.89 cputime=68.093 memavail=717048 print_time=1072.660 buffer_time=2.030 print_stall=0 extruder: target=200 temp=200.0 pwm=0.703
Stats 1069.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=890167 bytes_read=391630 bytes_retransmit=9 bytes_invalid=0 send_seq=22169 receive_seq=22169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996665 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=43.1 mcu_temp: temp=37.2 sd_pos=206424 sysload=0.89 cputime=68.166 memavail=717228 print_time=1073.849 buffer_time=2.218 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 1070.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=892038 bytes_read=392109 bytes_retransmit=9 bytes_invalid=0 send_seq=22208 receive_seq=22208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996660 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=43.3 mcu_temp: temp=37.1 sd_pos=207039 sysload=0.89 cputime=68.235 memavail=717324 print_time=1074.639 buffer_time=2.007 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 1071.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=894177 bytes_read=392652 bytes_retransmit=9 bytes_invalid=0 send_seq=22252 receive_seq=22252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996654 heater_bed: target=60 temp=60.0 pwm=0.343 raspberry_pi: temp=43.5 mcu_temp: temp=37.1 sd_pos=207547 sysload=0.82 cputime=68.311 memavail=716836 print_time=1075.821 buffer_time=2.189 print_stall=0 extruder: target=200 temp=199.8 pwm=0.703
Stats 1072.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=896161 bytes_read=393139 bytes_retransmit=9 bytes_invalid=0 send_seq=22292 receive_seq=22292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996649 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.2 mcu_temp: temp=37.1 sd_pos=208012 sysload=0.82 cputime=68.388 memavail=717384 print_time=1076.798 buffer_time=2.165 print_stall=0 extruder: target=200 temp=199.7 pwm=0.712
Stats 1073.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=897753 bytes_read=393597 bytes_retransmit=9 bytes_invalid=0 send_seq=22327 receive_seq=22327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996646 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=43.3 mcu_temp: temp=37.0 sd_pos=208375 sysload=0.82 cputime=68.455 memavail=717636 print_time=1077.862 buffer_time=2.229 print_stall=0 extruder: target=200 temp=199.7 pwm=0.766
Stats 1074.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=899988 bytes_read=394140 bytes_retransmit=9 bytes_invalid=0 send_seq=22373 receive_seq=22373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996645 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=43.2 mcu_temp: temp=37.1 sd_pos=209187 sysload=0.82 cputime=68.526 memavail=717440 print_time=1078.842 buffer_time=2.208 print_stall=0 extruder: target=200 temp=199.6 pwm=0.766
Stats 1075.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=902295 bytes_read=394679 bytes_retransmit=9 bytes_invalid=0 send_seq=22419 receive_seq=22419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996642 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=43.8 mcu_temp: temp=37.1 sd_pos=209697 sysload=0.82 cputime=68.596 memavail=717756 print_time=1080.470 buffer_time=2.835 print_stall=0 extruder: target=200 temp=199.7 pwm=0.702
Stats 1076.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=902991 bytes_read=395085 bytes_retransmit=9 bytes_invalid=0 send_seq=22440 receive_seq=22440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996649 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=43.2 mcu_temp: temp=37.2 sd_pos=209857 sysload=0.75 cputime=68.657 memavail=717452 print_time=1080.646 buffer_time=2.011 print_stall=0 extruder: target=200 temp=199.7 pwm=0.702
Stats 1077.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=905389 bytes_read=395638 bytes_retransmit=9 bytes_invalid=0 send_seq=22488 receive_seq=22488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996644 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=44.0 mcu_temp: temp=37.1 sd_pos=210607 sysload=0.75 cputime=68.729 memavail=717576 print_time=1081.744 buffer_time=2.108 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 1078.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=907130 bytes_read=396116 bytes_retransmit=9 bytes_invalid=0 send_seq=22524 receive_seq=22524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996642 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=43.3 mcu_temp: temp=37.2 sd_pos=210863 sysload=0.75 cputime=68.794 memavail=717336 print_time=1083.227 buffer_time=2.591 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 1079.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=909753 bytes_read=396660 bytes_retransmit=9 bytes_invalid=0 send_seq=22576 receive_seq=22576 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=43.4 mcu_temp: temp=37.1 sd_pos=211637 sysload=0.75 cputime=68.862 memavail=717408 print_time=1084.476 buffer_time=2.839 print_stall=0 extruder: target=200 temp=200.0 pwm=0.690
Stats 1080.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=910731 bytes_read=397093 bytes_retransmit=9 bytes_invalid=0 send_seq=22600 receive_seq=22600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=43.2 mcu_temp: temp=37.1 sd_pos=211807 sysload=0.75 cputime=68.925 memavail=717632 print_time=1085.223 buffer_time=2.586 print_stall=0 extruder: target=200 temp=200.0 pwm=0.690
Stats 1081.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=911849 bytes_read=397536 bytes_retransmit=9 bytes_invalid=0 send_seq=22626 receive_seq=22626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996643 heater_bed: target=60 temp=60.0 pwm=0.469 raspberry_pi: temp=43.2 mcu_temp: temp=37.1 sd_pos=212038 sysload=0.69 cputime=68.989 memavail=717696 print_time=1086.701 buffer_time=3.062 print_stall=0 extruder: target=200 temp=200.1 pwm=0.627
Stats 1082.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=912043 bytes_read=397890 bytes_retransmit=9 bytes_invalid=0 send_seq=22640 receive_seq=22640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996642 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.5 mcu_temp: temp=37.2 sd_pos=212038 sysload=0.69 cputime=69.047 memavail=717200 print_time=1086.701 buffer_time=2.061 print_stall=0 extruder: target=200 temp=200.2 pwm=0.627
Stats 1083.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=913100 bytes_read=398323 bytes_retransmit=9 bytes_invalid=0 send_seq=22664 receive_seq=22664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996644 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.3 mcu_temp: temp=37.2 sd_pos=212295 sysload=0.69 cputime=69.110 memavail=717256 print_time=1087.702 buffer_time=2.061 print_stall=0 extruder: target=200 temp=200.3 pwm=0.627
Stats 1084.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=915288 bytes_read=398841 bytes_retransmit=9 bytes_invalid=0 send_seq=22708 receive_seq=22708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996642 heater_bed: target=60 temp=60.0 pwm=0.340 raspberry_pi: temp=43.3 mcu_temp: temp=37.2 sd_pos=212677 sysload=0.69 cputime=69.177 memavail=717512 print_time=1089.803 buffer_time=3.162 print_stall=0 extruder: target=200 temp=200.3 pwm=0.627
Stats 1085.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=915461 bytes_read=399185 bytes_retransmit=9 bytes_invalid=0 send_seq=22720 receive_seq=22720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.442 raspberry_pi: temp=43.2 mcu_temp: temp=37.2 sd_pos=212677 sysload=0.69 cputime=69.235 memavail=717100 print_time=1089.803 buffer_time=2.161 print_stall=0 extruder: target=200 temp=200.3 pwm=0.626
Stats 1086.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=917763 bytes_read=399743 bytes_retransmit=9 bytes_invalid=0 send_seq=22766 receive_seq=22766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996641 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=42.9 mcu_temp: temp=37.3 sd_pos=213066 sysload=0.64 cputime=69.305 memavail=716360 print_time=1090.980 buffer_time=2.337 print_stall=0 extruder: target=200 temp=200.3 pwm=0.626
Stats 1087.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=919468 bytes_read=400226 bytes_retransmit=9 bytes_invalid=0 send_seq=22803 receive_seq=22803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=43.4 mcu_temp: temp=37.3 sd_pos=213683 sysload=0.64 cputime=69.375 memavail=716340 print_time=1091.744 buffer_time=2.099 print_stall=0 extruder: target=200 temp=200.3 pwm=0.626
Stats 1088.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=921550 bytes_read=400715 bytes_retransmit=9 bytes_invalid=0 send_seq=22844 receive_seq=22844 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996643 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=43.6 mcu_temp: temp=37.1 sd_pos=214230 sysload=0.64 cputime=69.442 memavail=716408 print_time=1092.942 buffer_time=2.297 print_stall=0 extruder: target=200 temp=200.2 pwm=0.626
Stats 1089.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=923263 bytes_read=401218 bytes_retransmit=9 bytes_invalid=0 send_seq=22882 receive_seq=22882 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996645 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=43.2 mcu_temp: temp=37.2 sd_pos=214661 sysload=0.64 cputime=69.512 memavail=716224 print_time=1093.871 buffer_time=2.225 print_stall=0 extruder: target=200 temp=200.1 pwm=0.727
Stats 1090.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=924940 bytes_read=401696 bytes_retransmit=9 bytes_invalid=0 send_seq=22918 receive_seq=22918 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996643 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.6 mcu_temp: temp=37.2 sd_pos=215056 sysload=0.64 cputime=69.576 memavail=716424 print_time=1094.961 buffer_time=2.314 print_stall=0 extruder: target=200 temp=199.9 pwm=0.727
Stats 1091.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=927243 bytes_read=402225 bytes_retransmit=9 bytes_invalid=0 send_seq=22964 receive_seq=22964 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.2 mcu_temp: temp=37.2 sd_pos=215899 sysload=0.59 cputime=69.645 memavail=716480 print_time=1095.971 buffer_time=2.324 print_stall=0 extruder: target=200 temp=199.8 pwm=0.727
Stats 1092.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=928322 bytes_read=402687 bytes_retransmit=9 bytes_invalid=0 send_seq=22991 receive_seq=22991 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=42.8 mcu_temp: temp=37.2 sd_pos=216085 sysload=0.59 cputime=69.712 memavail=716512 print_time=1096.684 buffer_time=2.035 print_stall=0 extruder: target=200 temp=199.8 pwm=0.727
Stats 1093.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=930017 bytes_read=403156 bytes_retransmit=9 bytes_invalid=0 send_seq=23028 receive_seq=23028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996635 heater_bed: target=60 temp=60.0 pwm=0.284 raspberry_pi: temp=43.4 mcu_temp: temp=37.1 sd_pos=216542 sysload=0.59 cputime=69.780 memavail=716460 print_time=1097.715 buffer_time=2.066 print_stall=0 extruder: target=200 temp=199.8 pwm=0.713
Stats 1094.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=932182 bytes_read=403665 bytes_retransmit=9 bytes_invalid=0 send_seq=23073 receive_seq=23073 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.1 mcu_temp: temp=37.3 sd_pos=217226 sysload=0.59 cputime=69.846 memavail=716524 print_time=1098.716 buffer_time=2.066 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 1095.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=934243 bytes_read=404207 bytes_retransmit=9 bytes_invalid=0 send_seq=23116 receive_seq=23116 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996636 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.3 mcu_temp: temp=37.3 sd_pos=217578 sysload=0.59 cputime=69.915 memavail=716796 print_time=1100.289 buffer_time=2.638 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 1096.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=936765 bytes_read=404751 bytes_retransmit=9 bytes_invalid=0 send_seq=23165 receive_seq=23165 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996647 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.7 mcu_temp: temp=37.2 sd_pos=218394 sysload=0.86 cputime=69.986 memavail=717092 print_time=1101.523 buffer_time=2.872 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 1097.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=937794 bytes_read=405150 bytes_retransmit=9 bytes_invalid=0 send_seq=23190 receive_seq=23190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.1 mcu_temp: temp=37.2 sd_pos=218532 sysload=0.86 cputime=70.050 memavail=716608 print_time=1102.273 buffer_time=2.621 print_stall=0 extruder: target=200 temp=199.9 pwm=0.719
Stats 1098.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=938907 bytes_read=405600 bytes_retransmit=9 bytes_invalid=0 send_seq=23216 receive_seq=23216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996694 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.8 mcu_temp: temp=37.2 sd_pos=218762 sysload=0.86 cputime=70.114 memavail=716708 print_time=1103.752 buffer_time=3.099 print_stall=0 extruder: target=200 temp=199.9 pwm=0.719
Stats 1099.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=939064 bytes_read=405939 bytes_retransmit=9 bytes_invalid=0 send_seq=23227 receive_seq=23227 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996689 heater_bed: target=60 temp=60.0 pwm=0.321 raspberry_pi: temp=43.4 mcu_temp: temp=37.4 sd_pos=218762 sysload=0.86 cputime=70.171 memavail=716992 print_time=1103.752 buffer_time=2.099 print_stall=0 extruder: target=200 temp=199.8 pwm=0.719
Stats 1100.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=940116 bytes_read=406353 bytes_retransmit=9 bytes_invalid=0 send_seq=23253 receive_seq=23253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996684 heater_bed: target=60 temp=60.0 pwm=0.466 raspberry_pi: temp=43.2 mcu_temp: temp=37.1 sd_pos=218987 sysload=0.86 cputime=70.232 memavail=716756 print_time=1104.749 buffer_time=2.095 print_stall=0 extruder: target=200 temp=199.8 pwm=0.719
Stats 1101.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=942237 bytes_read=406915 bytes_retransmit=9 bytes_invalid=0 send_seq=23297 receive_seq=23297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996685 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=43.2 mcu_temp: temp=37.2 sd_pos=219335 sysload=0.79 cputime=70.306 memavail=717088 print_time=1106.855 buffer_time=3.200 print_stall=0 extruder: target=200 temp=199.8 pwm=0.727
Stats 1102.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=942415 bytes_read=407264 bytes_retransmit=9 bytes_invalid=0 send_seq=23310 receive_seq=23310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996680 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=43.3 mcu_temp: temp=37.3 sd_pos=219335 sysload=0.79 cputime=70.365 memavail=717840 print_time=1106.855 buffer_time=2.199 print_stall=0 extruder: target=200 temp=199.8 pwm=0.727
Stats 1103.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=944647 bytes_read=407778 bytes_retransmit=9 bytes_invalid=0 send_seq=23356 receive_seq=23356 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996673 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=43.6 mcu_temp: temp=37.3 sd_pos=219722 sysload=0.79 cputime=70.432 memavail=718324 print_time=1108.021 buffer_time=2.364 print_stall=0 extruder: target=200 temp=199.8 pwm=0.727
Stats 1104.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=946419 bytes_read=408300 bytes_retransmit=9 bytes_invalid=0 send_seq=23395 receive_seq=23395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=167996673 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=43.4 mcu_temp: temp=37.3 sd_pos=220337 sysload=0.79 cputime=70.502 memavail=718588 print_time=1108.766 buffer_time=2.108 print_stall=0 extruder: target=200 temp=199.9 pwm=0.664
Stats 1105.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=948369 bytes_read=408779 bytes_retransmit=9 bytes_invalid=0 send_seq=23434 receive_seq=23434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.435 raspberry_pi: temp=43.4 mcu_temp: temp=37.2 sd_pos=220879 sysload=0.79 cputime=70.573 memavail=719104 print_time=1109.885 buffer_time=2.226 print_stall=0 extruder: target=200 temp=200.0 pwm=0.664
Stats 1106.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=950246 bytes_read=409298 bytes_retransmit=9 bytes_invalid=0 send_seq=23475 receive_seq=23475 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996741 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.2 mcu_temp: temp=37.2 sd_pos=221302 sysload=0.73 cputime=70.647 memavail=719180 print_time=1110.870 buffer_time=2.210 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 1107.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=951833 bytes_read=409790 bytes_retransmit=9 bytes_invalid=0 send_seq=23511 receive_seq=23511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996732 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.3 mcu_temp: temp=37.1 sd_pos=221663 sysload=0.73 cputime=70.713 memavail=718888 print_time=1111.932 buffer_time=2.272 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 1108.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=954045 bytes_read=410294 bytes_retransmit=9 bytes_invalid=0 send_seq=23555 receive_seq=23555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996731 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=43.4 mcu_temp: temp=37.2 sd_pos=222590 sysload=0.73 cputime=70.781 memavail=718948 print_time=1112.888 buffer_time=2.227 print_stall=0 extruder: target=200 temp=200.2 pwm=0.664
Stats 1109.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=955323 bytes_read=410743 bytes_retransmit=9 bytes_invalid=0 send_seq=23585 receive_seq=23585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996724 heater_bed: target=60 temp=60.0 pwm=0.317 raspberry_pi: temp=43.4 mcu_temp: temp=37.3 sd_pos=222806 sysload=0.73 cputime=70.845 memavail=718796 print_time=1113.660 buffer_time=1.999 print_stall=0 extruder: target=200 temp=200.3 pwm=0.611
Stats 1110.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=957043 bytes_read=411245 bytes_retransmit=9 bytes_invalid=0 send_seq=23623 receive_seq=23623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996718 heater_bed: target=60 temp=60.0 pwm=0.453 raspberry_pi: temp=43.6 mcu_temp: temp=37.2 sd_pos=223295 sysload=0.73 cputime=70.919 memavail=718824 print_time=1114.697 buffer_time=2.034 print_stall=0 extruder: target=200 temp=200.3 pwm=0.611
Stats 1111.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=959178 bytes_read=411764 bytes_retransmit=9 bytes_invalid=0 send_seq=23667 receive_seq=23667 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996706 heater_bed: target=60 temp=60.0 pwm=0.445 raspberry_pi: temp=43.1 mcu_temp: temp=37.4 sd_pos=223981 sysload=0.67 cputime=70.986 memavail=718824 print_time=1115.692 buffer_time=2.029 print_stall=0 extruder: target=200 temp=200.4 pwm=0.611
Stats 1112.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=961192 bytes_read=412273 bytes_retransmit=9 bytes_invalid=0 send_seq=23709 receive_seq=23709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=167996696 heater_bed: target=60 temp=60.0 pwm=0.456 raspberry_pi: temp=43.4 mcu_temp: temp=37.4 sd_pos=224300 sysload=0.67 cputime=71.052 memavail=718832 print_time=1117.267 buffer_time=2.603 print_stall=0 extruder: target=200 temp=200.4 pwm=0.611
Stats 1113.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=963820 bytes_read=412840 bytes_retransmit=9 bytes_invalid=0 send_seq=23760 receive_seq=23760 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996769 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.6 mcu_temp: temp=37.3 sd_pos=225108 sysload=0.67 cputime=71.122 memavail=718832 print_time=1118.511 buffer_time=2.846 print_stall=0 extruder: target=200 temp=200.3 pwm=0.653
Stats 1114.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=964852 bytes_read=413249 bytes_retransmit=9 bytes_invalid=0 send_seq=23785 receive_seq=23785 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=167996756 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.3 mcu_temp: temp=37.3 sd_pos=225246 sysload=0.67 cputime=71.187 memavail=719088 print_time=1119.252 buffer_time=2.587 print_stall=0 extruder: target=200 temp=200.3 pwm=0.653
Stats 1115.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=965929 bytes_read=413678 bytes_retransmit=9 bytes_invalid=0 send_seq=23811 receive_seq=23811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996745 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.2 mcu_temp: temp=37.3 sd_pos=225477 sysload=0.67 cputime=71.249 memavail=718884 print_time=1120.733 buffer_time=3.066 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 1116.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=966099 bytes_read=414065 bytes_retransmit=9 bytes_invalid=0 send_seq=23823 receive_seq=23823 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996734 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.0 mcu_temp: temp=37.3 sd_pos=225477 sysload=0.61 cputime=71.307 memavail=719084 print_time=1120.733 buffer_time=2.066 print_stall=0 extruder: target=200 temp=200.1 pwm=0.709
Stats 1117.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=967228 bytes_read=414484 bytes_retransmit=9 bytes_invalid=0 send_seq=23850 receive_seq=23850 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996738 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=43.8 mcu_temp: temp=37.1 sd_pos=225769 sysload=0.61 cputime=71.373 memavail=719140 print_time=1121.749 buffer_time=2.081 print_stall=0 extruder: target=200 temp=200.0 pwm=0.709
Stats 1118.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=969349 bytes_read=414998 bytes_retransmit=9 bytes_invalid=0 send_seq=23893 receive_seq=23893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996729 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=43.6 mcu_temp: temp=37.3 sd_pos=226120 sysload=0.61 cputime=71.441 memavail=718904 print_time=1123.846 buffer_time=3.178 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 1119.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=969538 bytes_read=415375 bytes_retransmit=9 bytes_invalid=0 send_seq=23906 receive_seq=23906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996719 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.0 mcu_temp: temp=37.3 sd_pos=226120 sysload=0.61 cputime=71.501 memavail=718904 print_time=1123.846 buffer_time=2.178 print_stall=0 extruder: target=200 temp=199.9 pwm=0.709
Stats 1120.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=971819 bytes_read=415894 bytes_retransmit=9 bytes_invalid=0 send_seq=23953 receive_seq=23953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996711 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=44.2 mcu_temp: temp=37.3 sd_pos=226543 sysload=0.61 cputime=71.567 memavail=718904 print_time=1125.003 buffer_time=2.334 print_stall=0 extruder: target=200 temp=199.9 pwm=0.715
Stats 1121.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=973440 bytes_read=416388 bytes_retransmit=9 bytes_invalid=0 send_seq=23989 receive_seq=23989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.7 mcu_temp: temp=37.3 sd_pos=227155 sysload=0.57 cputime=71.635 memavail=718660 print_time=1125.732 buffer_time=2.063 print_stall=0 extruder: target=200 temp=199.9 pwm=0.715
Stats 1122.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=975386 bytes_read=416899 bytes_retransmit=9 bytes_invalid=0 send_seq=24030 receive_seq=24030 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.328 raspberry_pi: temp=43.7 mcu_temp: temp=37.3 sd_pos=227699 sysload=0.57 cputime=71.704 memavail=718408 print_time=1126.842 buffer_time=2.171 print_stall=0 extruder: target=200 temp=199.9 pwm=0.662
Stats 1123.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=977296 bytes_read=417373 bytes_retransmit=9 bytes_invalid=0 send_seq=24070 receive_seq=24070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996703 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.8 mcu_temp: temp=37.2 sd_pos=228172 sysload=0.57 cputime=71.783 memavail=718428 print_time=1127.820 buffer_time=2.148 print_stall=0 extruder: target=200 temp=199.9 pwm=0.662
Stats 1124.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=979715 bytes_read=417910 bytes_retransmit=9 bytes_invalid=0 send_seq=24118 receive_seq=24118 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996704 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=44.3 mcu_temp: temp=37.3 sd_pos=228562 sysload=0.57 cputime=71.852 memavail=718176 print_time=1129.656 buffer_time=2.984 print_stall=0 extruder: target=200 temp=199.9 pwm=0.662
Stats 1125.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=980469 bytes_read=418332 bytes_retransmit=9 bytes_invalid=0 send_seq=24140 receive_seq=24140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996695 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.9 mcu_temp: temp=37.5 sd_pos=228756 sysload=0.57 cputime=71.913 memavail=718792 print_time=1129.853 buffer_time=2.180 print_stall=0 extruder: target=200 temp=199.9 pwm=0.662
Stats 1126.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=982569 bytes_read=418847 bytes_retransmit=9 bytes_invalid=0 send_seq=24183 receive_seq=24183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996686 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.9 mcu_temp: temp=37.3 sd_pos=229406 sysload=0.52 cputime=71.980 memavail=718552 print_time=1130.832 buffer_time=2.159 print_stall=0 extruder: target=200 temp=200.0 pwm=0.642
Stats 1127.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=984567 bytes_read=419351 bytes_retransmit=9 bytes_invalid=0 send_seq=24224 receive_seq=24224 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996678 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.5 mcu_temp: temp=37.4 sd_pos=229694 sysload=0.52 cputime=72.045 memavail=718060 print_time=1132.403 buffer_time=2.729 print_stall=0 extruder: target=200 temp=200.0 pwm=0.642
Stats 1128.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=987093 bytes_read=419913 bytes_retransmit=9 bytes_invalid=0 send_seq=24274 receive_seq=24274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996673 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.9 mcu_temp: temp=37.4 sd_pos=230538 sysload=0.52 cputime=72.121 memavail=717824 print_time=1133.641 buffer_time=2.968 print_stall=0 extruder: target=200 temp=200.0 pwm=0.642
Stats 1129.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=988132 bytes_read=420322 bytes_retransmit=9 bytes_invalid=0 send_seq=24299 receive_seq=24299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996664 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.6 mcu_temp: temp=37.5 sd_pos=230658 sysload=0.52 cputime=72.183 memavail=717824 print_time=1134.400 buffer_time=2.725 print_stall=0 extruder: target=200 temp=200.0 pwm=0.642
Stats 1130.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=989539 bytes_read=420776 bytes_retransmit=9 bytes_invalid=0 send_seq=24330 receive_seq=24330 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=43.3 mcu_temp: temp=37.4 sd_pos=231021 sysload=0.52 cputime=72.249 memavail=718092 print_time=1135.291 buffer_time=2.616 print_stall=0 extruder: target=200 temp=200.1 pwm=0.642
Stats 1131.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=992011 bytes_read=421348 bytes_retransmit=9 bytes_invalid=0 send_seq=24379 receive_seq=24379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996653 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=43.5 mcu_temp: temp=37.4 sd_pos=231877 sysload=0.48 cputime=72.326 memavail=718292 print_time=1136.274 buffer_time=2.599 print_stall=0 extruder: target=200 temp=200.1 pwm=0.662
Stats 1132.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=992957 bytes_read=421757 bytes_retransmit=9 bytes_invalid=0 send_seq=24404 receive_seq=24404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996646 heater_bed: target=60 temp=60.0 pwm=0.417 raspberry_pi: temp=43.4 mcu_temp: temp=37.3 sd_pos=231983 sysload=0.48 cputime=72.392 memavail=718852 print_time=1136.925 buffer_time=2.249 print_stall=0 extruder: target=200 temp=200.1 pwm=0.662
Stats 1133.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=994141 bytes_read=422206 bytes_retransmit=9 bytes_invalid=0 send_seq=24434 receive_seq=24434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996677 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.2 mcu_temp: temp=37.6 sd_pos=232215 sysload=0.48 cputime=72.464 memavail=718108 print_time=1138.443 buffer_time=2.765 print_stall=0 extruder: target=200 temp=200.1 pwm=0.662
Stats 1134.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=995180 bytes_read=422648 bytes_retransmit=9 bytes_invalid=0 send_seq=24460 receive_seq=24460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.9 mcu_temp: temp=37.4 sd_pos=232441 sysload=0.48 cputime=72.531 memavail=718108 print_time=1139.449 buffer_time=2.771 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 1135.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=996115 bytes_read=423052 bytes_retransmit=9 bytes_invalid=0 send_seq=24484 receive_seq=24484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996661 heater_bed: target=60 temp=60.0 pwm=0.509 raspberry_pi: temp=42.8 mcu_temp: temp=37.4 sd_pos=232667 sysload=0.48 cputime=72.596 memavail=718428 print_time=1139.877 buffer_time=2.198 print_stall=0 extruder: target=200 temp=199.9 pwm=0.713
Stats 1136.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=997521 bytes_read=423542 bytes_retransmit=9 bytes_invalid=0 send_seq=24517 receive_seq=24517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996661 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=43.5 mcu_temp: temp=37.5 sd_pos=232818 sysload=0.44 cputime=72.667 memavail=718136 print_time=1141.556 buffer_time=2.876 print_stall=0 extruder: target=200 temp=199.9 pwm=0.713
Stats 1137.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=998537 bytes_read=423979 bytes_retransmit=9 bytes_invalid=0 send_seq=24542 receive_seq=24542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996667 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=233139 sysload=0.44 cputime=72.738 memavail=717952 print_time=1142.007 buffer_time=2.326 print_stall=0 extruder: target=200 temp=199.9 pwm=0.718
Stats 1138.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=999984 bytes_read=424433 bytes_retransmit=9 bytes_invalid=0 send_seq=24576 receive_seq=24576 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996674 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=43.3 mcu_temp: temp=37.4 sd_pos=233238 sysload=0.44 cputime=72.812 memavail=717708 print_time=1142.706 buffer_time=2.024 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 1139.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1002618 bytes_read=424992 bytes_retransmit=9 bytes_invalid=0 send_seq=24628 receive_seq=24628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996668 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.2 mcu_temp: temp=37.3 sd_pos=234061 sysload=0.44 cputime=72.888 memavail=717708 print_time=1144.282 buffer_time=2.599 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 1140.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1004332 bytes_read=425484 bytes_retransmit=9 bytes_invalid=0 send_seq=24664 receive_seq=24664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996676 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.4 mcu_temp: temp=37.3 sd_pos=234633 sysload=0.44 cputime=72.959 memavail=717708 print_time=1144.994 buffer_time=2.312 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 1141.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1006781 bytes_read=426028 bytes_retransmit=9 bytes_invalid=0 send_seq=24713 receive_seq=24713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996678 heater_bed: target=60 temp=60.0 pwm=0.311 raspberry_pi: temp=43.4 mcu_temp: temp=37.6 sd_pos=235179 sysload=0.48 cputime=73.040 memavail=718216 print_time=1146.557 buffer_time=2.873 print_stall=0 extruder: target=200 temp=199.9 pwm=0.723
Stats 1142.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1008783 bytes_read=426477 bytes_retransmit=9 bytes_invalid=0 send_seq=24755 receive_seq=24743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=349 upcoming_bytes=0 freq=167996671 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=42.9 mcu_temp: temp=37.3 sd_pos=236028 sysload=0.48 cputime=73.117 memavail=717968 print_time=1147.531 buffer_time=2.846 print_stall=0 extruder: target=200 temp=199.8 pwm=0.723
Stats 1143.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1010100 bytes_read=426999 bytes_retransmit=9 bytes_invalid=0 send_seq=24785 receive_seq=24785 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.2 mcu_temp: temp=37.5 sd_pos=236117 sysload=0.48 cputime=73.190 memavail=717976 print_time=1148.184 buffer_time=2.499 print_stall=0 extruder: target=200 temp=199.9 pwm=0.723
Stats 1144.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1011247 bytes_read=427423 bytes_retransmit=9 bytes_invalid=0 send_seq=24813 receive_seq=24813 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996661 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=43.4 mcu_temp: temp=37.3 sd_pos=236384 sysload=0.48 cputime=73.257 memavail=717984 print_time=1149.019 buffer_time=2.334 print_stall=0 extruder: target=200 temp=199.9 pwm=0.723
Stats 1145.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1013885 bytes_read=427977 bytes_retransmit=9 bytes_invalid=0 send_seq=24864 receive_seq=24864 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996654 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=43.6 mcu_temp: temp=37.5 sd_pos=237279 sysload=0.48 cputime=73.334 memavail=717984 print_time=1150.152 buffer_time=2.465 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 1146.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1015006 bytes_read=428446 bytes_retransmit=9 bytes_invalid=0 send_seq=24892 receive_seq=24892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996654 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=43.2 mcu_temp: temp=37.5 sd_pos=237464 sysload=0.53 cputime=73.404 memavail=718236 print_time=1150.895 buffer_time=2.207 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 1147.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1016156 bytes_read=428860 bytes_retransmit=9 bytes_invalid=0 send_seq=24918 receive_seq=24918 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996648 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.2 mcu_temp: temp=37.4 sd_pos=237632 sysload=0.53 cputime=73.471 memavail=718356 print_time=1151.752 buffer_time=2.064 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 1148.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1018717 bytes_read=429397 bytes_retransmit=9 bytes_invalid=0 send_seq=24968 receive_seq=24968 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996642 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.6 mcu_temp: temp=37.3 sd_pos=238446 sysload=0.53 cputime=73.550 memavail=718372 print_time=1152.985 buffer_time=2.297 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 1149.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1019753 bytes_read=429831 bytes_retransmit=9 bytes_invalid=0 send_seq=24994 receive_seq=24994 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.441 raspberry_pi: temp=43.0 mcu_temp: temp=37.4 sd_pos=238586 sysload=0.53 cputime=73.617 memavail=718372 print_time=1153.731 buffer_time=2.042 print_stall=0 extruder: target=200 temp=200.2 pwm=0.638
Stats 1150.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1020814 bytes_read=430245 bytes_retransmit=9 bytes_invalid=0 send_seq=25020 receive_seq=25020 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=43.5 mcu_temp: temp=37.6 sd_pos=238819 sysload=0.53 cputime=73.685 memavail=718372 print_time=1155.212 buffer_time=2.521 print_stall=0 extruder: target=200 temp=200.2 pwm=0.638
Stats 1151.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1021929 bytes_read=430694 bytes_retransmit=9 bytes_invalid=0 send_seq=25047 receive_seq=25047 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=43.3 mcu_temp: temp=37.4 sd_pos=239080 sysload=0.56 cputime=73.751 memavail=718372 print_time=1156.227 buffer_time=2.536 print_stall=0 extruder: target=200 temp=200.2 pwm=0.638
Stats 1152.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1024043 bytes_read=431216 bytes_retransmit=9 bytes_invalid=0 send_seq=25089 receive_seq=25089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=239462 sysload=0.56 cputime=73.822 memavail=718376 print_time=1158.334 buffer_time=3.641 print_stall=0 extruder: target=200 temp=200.1 pwm=0.638
Stats 1153.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1024269 bytes_read=431565 bytes_retransmit=9 bytes_invalid=0 send_seq=25102 receive_seq=25102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.0 mcu_temp: temp=37.4 sd_pos=239462 sysload=0.56 cputime=73.883 memavail=718376 print_time=1158.334 buffer_time=2.641 print_stall=0 extruder: target=200 temp=200.1 pwm=0.685
Stats 1154.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1025287 bytes_read=431989 bytes_retransmit=9 bytes_invalid=0 send_seq=25127 receive_seq=25127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.1 mcu_temp: temp=37.5 sd_pos=239752 sysload=0.56 cputime=73.948 memavail=718476 print_time=1158.800 buffer_time=2.106 print_stall=0 extruder: target=200 temp=200.1 pwm=0.685
Stats 1155.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1027561 bytes_read=432531 bytes_retransmit=9 bytes_invalid=0 send_seq=25173 receive_seq=25173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.453 raspberry_pi: temp=43.7 mcu_temp: temp=37.3 sd_pos=240285 sysload=0.56 cputime=74.021 memavail=718064 print_time=1159.978 buffer_time=2.283 print_stall=0 extruder: target=200 temp=200.0 pwm=0.685
Stats 1156.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1029234 bytes_read=433010 bytes_retransmit=9 bytes_invalid=0 send_seq=25209 receive_seq=25209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.0 mcu_temp: temp=37.4 sd_pos=240687 sysload=0.60 cputime=74.092 memavail=718064 print_time=1161.046 buffer_time=2.351 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 1157.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1031006 bytes_read=433494 bytes_retransmit=9 bytes_invalid=0 send_seq=25246 receive_seq=25246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.6 mcu_temp: temp=37.5 sd_pos=241259 sysload=0.60 cputime=74.161 memavail=718064 print_time=1161.748 buffer_time=2.052 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1158.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1033294 bytes_read=434041 bytes_retransmit=9 bytes_invalid=0 send_seq=25293 receive_seq=25293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=241799 sysload=0.60 cputime=74.238 memavail=718064 print_time=1163.309 buffer_time=2.611 print_stall=0 extruder: target=200 temp=199.7 pwm=0.762
Stats 1159.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1035605 bytes_read=434560 bytes_retransmit=9 bytes_invalid=0 send_seq=25340 receive_seq=25340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=44.1 mcu_temp: temp=37.4 sd_pos=242709 sysload=0.60 cputime=74.310 memavail=718072 print_time=1164.261 buffer_time=2.563 print_stall=0 extruder: target=200 temp=199.7 pwm=0.762
Stats 1160.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1036631 bytes_read=434989 bytes_retransmit=9 bytes_invalid=0 send_seq=25366 receive_seq=25366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.323 raspberry_pi: temp=43.8 mcu_temp: temp=37.4 sd_pos=242801 sysload=0.60 cputime=74.374 memavail=718076 print_time=1164.916 buffer_time=2.218 print_stall=0 extruder: target=200 temp=199.7 pwm=0.696
Stats 1161.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1037811 bytes_read=435461 bytes_retransmit=9 bytes_invalid=0 send_seq=25395 receive_seq=25395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=43.9 mcu_temp: temp=37.5 sd_pos=243063 sysload=0.63 cputime=74.440 memavail=718340 print_time=1165.751 buffer_time=2.052 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1162.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1040411 bytes_read=435995 bytes_retransmit=9 bytes_invalid=0 send_seq=25445 receive_seq=25445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=43.5 mcu_temp: temp=37.3 sd_pos=244020 sysload=0.63 cputime=74.514 memavail=718552 print_time=1166.908 buffer_time=2.208 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1163.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1042435 bytes_read=436504 bytes_retransmit=9 bytes_invalid=0 send_seq=25487 receive_seq=25487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=42.8 mcu_temp: temp=37.4 sd_pos=244343 sysload=0.63 cputime=74.584 memavail=718792 print_time=1168.491 buffer_time=2.790 print_stall=0 extruder: target=200 temp=200.0 pwm=0.635
Stats 1164.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1045051 bytes_read=437076 bytes_retransmit=9 bytes_invalid=0 send_seq=25539 receive_seq=25539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=167996624 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=43.9 mcu_temp: temp=37.5 sd_pos=245186 sysload=0.63 cputime=74.665 memavail=718852 print_time=1169.715 buffer_time=3.014 print_stall=0 extruder: target=200 temp=200.1 pwm=0.635
Stats 1165.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1045242 bytes_read=437415 bytes_retransmit=9 bytes_invalid=0 send_seq=25550 receive_seq=25550 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.6 mcu_temp: temp=37.5 sd_pos=245186 sysload=0.63 cputime=74.725 memavail=719080 print_time=1169.715 buffer_time=2.013 print_stall=0 extruder: target=200 temp=200.1 pwm=0.635
Stats 1166.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1047150 bytes_read=437929 bytes_retransmit=9 bytes_invalid=0 send_seq=25590 receive_seq=25590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.460 raspberry_pi: temp=43.6 mcu_temp: temp=37.5 sd_pos=245561 sysload=0.58 cputime=74.794 memavail=719356 print_time=1171.941 buffer_time=3.240 print_stall=0 extruder: target=200 temp=200.1 pwm=0.635
Stats 1167.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1047368 bytes_read=438306 bytes_retransmit=9 bytes_invalid=0 send_seq=25603 receive_seq=25603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=245561 sysload=0.58 cputime=74.855 memavail=718864 print_time=1171.941 buffer_time=2.239 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 1168.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1048439 bytes_read=438720 bytes_retransmit=9 bytes_invalid=0 send_seq=25629 receive_seq=25629 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.324 raspberry_pi: temp=43.5 mcu_temp: temp=37.4 sd_pos=245820 sysload=0.58 cputime=74.922 memavail=719168 print_time=1172.963 buffer_time=2.260 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 1169.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1050588 bytes_read=439234 bytes_retransmit=9 bytes_invalid=0 send_seq=25672 receive_seq=25672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.4 mcu_temp: temp=37.4 sd_pos=246204 sysload=0.58 cputime=74.994 memavail=718672 print_time=1175.062 buffer_time=3.358 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 1170.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1050775 bytes_read=439601 bytes_retransmit=9 bytes_invalid=0 send_seq=25683 receive_seq=25683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.5 mcu_temp: temp=37.3 sd_pos=246204 sysload=0.58 cputime=75.054 memavail=718672 print_time=1175.062 buffer_time=2.358 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 1171.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1052991 bytes_read=440115 bytes_retransmit=9 bytes_invalid=0 send_seq=25726 receive_seq=25726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.2 mcu_temp: temp=37.4 sd_pos=246593 sysload=0.53 cputime=75.124 memavail=718672 print_time=1176.205 buffer_time=2.500 print_stall=0 extruder: target=200 temp=200.0 pwm=0.727
Stats 1172.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1054786 bytes_read=440549 bytes_retransmit=9 bytes_invalid=0 send_seq=25765 receive_seq=25753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=43.6 mcu_temp: temp=37.7 sd_pos=247161 sysload=0.53 cputime=75.195 memavail=718672 print_time=1177.122 buffer_time=2.414 print_stall=0 extruder: target=200 temp=199.9 pwm=0.727
Stats 1173.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1055791 bytes_read=441042 bytes_retransmit=9 bytes_invalid=0 send_seq=25790 receive_seq=25790 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=43.8 mcu_temp: temp=37.3 sd_pos=247330 sysload=0.53 cputime=75.260 memavail=718672 print_time=1177.769 buffer_time=2.061 print_stall=0 extruder: target=200 temp=199.9 pwm=0.727
Stats 1174.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1058767 bytes_read=441601 bytes_retransmit=9 bytes_invalid=0 send_seq=25847 receive_seq=25847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.0 mcu_temp: temp=37.5 sd_pos=248162 sysload=0.53 cputime=75.341 memavail=717924 print_time=1179.276 buffer_time=2.567 print_stall=0 extruder: target=200 temp=199.9 pwm=0.727
Stats 1175.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1059752 bytes_read=442047 bytes_retransmit=9 bytes_invalid=0 send_seq=25871 receive_seq=25871 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=248230 sysload=0.53 cputime=75.406 memavail=717928 print_time=1179.810 buffer_time=2.101 print_stall=0 extruder: target=200 temp=199.8 pwm=0.725
Stats 1176.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1061034 bytes_read=442495 bytes_retransmit=9 bytes_invalid=0 send_seq=25901 receive_seq=25901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.3 mcu_temp: temp=37.5 sd_pos=248429 sysload=0.49 cputime=75.471 memavail=717928 print_time=1180.852 buffer_time=2.142 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 1177.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1063600 bytes_read=443029 bytes_retransmit=9 bytes_invalid=0 send_seq=25951 receive_seq=25951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.3 mcu_temp: temp=37.5 sd_pos=249234 sysload=0.49 cputime=75.544 memavail=717928 print_time=1182.065 buffer_time=2.354 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 1178.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1064656 bytes_read=443472 bytes_retransmit=9 bytes_invalid=0 send_seq=25977 receive_seq=25977 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.6 mcu_temp: temp=37.5 sd_pos=249360 sysload=0.49 cputime=75.611 memavail=717928 print_time=1182.831 buffer_time=2.120 print_stall=0 extruder: target=200 temp=200.1 pwm=0.614
Stats 1179.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1066066 bytes_read=443925 bytes_retransmit=9 bytes_invalid=0 send_seq=26008 receive_seq=26008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.5 mcu_temp: temp=37.7 sd_pos=249722 sysload=0.49 cputime=75.677 memavail=717964 print_time=1183.725 buffer_time=2.013 print_stall=0 extruder: target=200 temp=200.2 pwm=0.614
Stats 1180.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1068990 bytes_read=444489 bytes_retransmit=9 bytes_invalid=0 send_seq=26064 receive_seq=26064 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=43.7 mcu_temp: temp=37.5 sd_pos=250560 sysload=0.49 cputime=75.751 memavail=717964 print_time=1185.296 buffer_time=2.583 print_stall=0 extruder: target=200 temp=200.3 pwm=0.614
Stats 1181.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1070129 bytes_read=444952 bytes_retransmit=9 bytes_invalid=0 send_seq=26091 receive_seq=26091 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=43.6 mcu_temp: temp=37.3 sd_pos=250822 sysload=0.45 cputime=75.818 memavail=718408 print_time=1186.131 buffer_time=2.417 print_stall=0 extruder: target=200 temp=200.3 pwm=0.614
Stats 1182.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1072726 bytes_read=445505 bytes_retransmit=9 bytes_invalid=0 send_seq=26142 receive_seq=26142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.4 mcu_temp: temp=37.5 sd_pos=251677 sysload=0.45 cputime=75.890 memavail=718500 print_time=1187.194 buffer_time=2.480 print_stall=0 extruder: target=200 temp=200.3 pwm=0.642
Stats 1183.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1073722 bytes_read=445914 bytes_retransmit=9 bytes_invalid=0 send_seq=26167 receive_seq=26167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996641 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=251789 sysload=0.45 cputime=75.951 memavail=718760 print_time=1187.887 buffer_time=2.172 print_stall=0 extruder: target=200 temp=200.2 pwm=0.642
Stats 1184.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1074869 bytes_read=446367 bytes_retransmit=9 bytes_invalid=0 send_seq=26195 receive_seq=26195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996646 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=43.6 mcu_temp: temp=37.3 sd_pos=252018 sysload=0.45 cputime=76.022 memavail=718716 print_time=1189.388 buffer_time=2.672 print_stall=0 extruder: target=200 temp=200.2 pwm=0.695
Stats 1185.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1075881 bytes_read=446795 bytes_retransmit=9 bytes_invalid=0 send_seq=26221 receive_seq=26221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996641 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.9 mcu_temp: temp=37.3 sd_pos=252278 sysload=0.45 cputime=76.088 memavail=718548 print_time=1190.416 buffer_time=2.700 print_stall=0 extruder: target=200 temp=200.1 pwm=0.695
Stats 1186.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1076753 bytes_read=447204 bytes_retransmit=9 bytes_invalid=0 send_seq=26243 receive_seq=26243 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=167996636 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.7 mcu_temp: temp=37.5 sd_pos=252507 sysload=0.41 cputime=76.149 memavail=718548 print_time=1190.808 buffer_time=2.091 print_stall=0 extruder: target=200 temp=200.0 pwm=0.695
Stats 1187.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1078246 bytes_read=447682 bytes_retransmit=9 bytes_invalid=0 send_seq=26276 receive_seq=26276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=43.8 mcu_temp: temp=37.3 sd_pos=252667 sysload=0.41 cputime=76.216 memavail=718548 print_time=1192.512 buffer_time=2.795 print_stall=0 extruder: target=200 temp=199.9 pwm=0.695
Stats 1188.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1079245 bytes_read=448110 bytes_retransmit=9 bytes_invalid=0 send_seq=26302 receive_seq=26302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996635 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=43.9 mcu_temp: temp=37.6 sd_pos=252956 sysload=0.41 cputime=76.279 memavail=718300 print_time=1192.965 buffer_time=2.247 print_stall=0 extruder: target=200 temp=200.0 pwm=0.722
Stats 1189.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1081576 bytes_read=448629 bytes_retransmit=9 bytes_invalid=0 send_seq=26349 receive_seq=26349 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=43.7 mcu_temp: temp=37.7 sd_pos=253492 sysload=0.41 cputime=76.346 memavail=718300 print_time=1194.153 buffer_time=2.434 print_stall=0 extruder: target=200 temp=199.9 pwm=0.722
Stats 1190.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1083410 bytes_read=449132 bytes_retransmit=9 bytes_invalid=0 send_seq=26387 receive_seq=26387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.0 mcu_temp: temp=37.5 sd_pos=253892 sysload=0.41 cputime=76.415 memavail=718308 print_time=1195.248 buffer_time=2.529 print_stall=0 extruder: target=200 temp=199.9 pwm=0.722
Stats 1191.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1085057 bytes_read=449625 bytes_retransmit=9 bytes_invalid=0 send_seq=26423 receive_seq=26423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.9 mcu_temp: temp=37.6 sd_pos=254497 sysload=0.38 cputime=76.484 memavail=718084 print_time=1195.928 buffer_time=2.208 print_stall=0 extruder: target=200 temp=199.9 pwm=0.668
Stats 1192.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1087427 bytes_read=450144 bytes_retransmit=9 bytes_invalid=0 send_seq=26470 receive_seq=26470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.6 mcu_temp: temp=37.6 sd_pos=255046 sysload=0.38 cputime=76.554 memavail=718088 print_time=1197.483 buffer_time=2.762 print_stall=0 extruder: target=200 temp=199.8 pwm=0.668
Stats 1193.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1089542 bytes_read=450677 bytes_retransmit=9 bytes_invalid=0 send_seq=26514 receive_seq=26514 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.1 mcu_temp: temp=37.5 sd_pos=255758 sysload=0.38 cputime=76.623 memavail=718088 print_time=1198.388 buffer_time=2.666 print_stall=0 extruder: target=200 temp=199.9 pwm=0.668
Stats 1194.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1090501 bytes_read=451100 bytes_retransmit=9 bytes_invalid=0 send_seq=26539 receive_seq=26539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.5 mcu_temp: temp=37.6 sd_pos=255850 sysload=0.38 cputime=76.685 memavail=718092 print_time=1199.048 buffer_time=2.325 print_stall=0 extruder: target=200 temp=199.9 pwm=0.668
Stats 1195.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1091670 bytes_read=451519 bytes_retransmit=9 bytes_invalid=0 send_seq=26566 receive_seq=26566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.5 mcu_temp: temp=37.4 sd_pos=256114 sysload=0.38 cputime=76.752 memavail=718096 print_time=1199.890 buffer_time=2.167 print_stall=0 extruder: target=200 temp=200.0 pwm=0.651
Stats 1196.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1094174 bytes_read=452098 bytes_retransmit=9 bytes_invalid=0 send_seq=26616 receive_seq=26616 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.2 mcu_temp: temp=37.5 sd_pos=256988 sysload=0.35 cputime=76.828 memavail=718096 print_time=1200.932 buffer_time=2.207 print_stall=0 extruder: target=200 temp=200.0 pwm=0.651
Stats 1197.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1096228 bytes_read=452627 bytes_retransmit=9 bytes_invalid=0 send_seq=26660 receive_seq=26660 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=44.4 mcu_temp: temp=37.3 sd_pos=257279 sysload=0.35 cputime=76.895 memavail=718096 print_time=1202.491 buffer_time=2.767 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 1198.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1098674 bytes_read=453151 bytes_retransmit=9 bytes_invalid=0 send_seq=26708 receive_seq=26708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=44.0 mcu_temp: temp=37.3 sd_pos=258070 sysload=0.35 cputime=76.963 memavail=718100 print_time=1203.673 buffer_time=2.947 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 1199.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1099736 bytes_read=453590 bytes_retransmit=9 bytes_invalid=0 send_seq=26735 receive_seq=26735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.7 mcu_temp: temp=37.5 sd_pos=258210 sysload=0.35 cputime=77.030 memavail=717948 print_time=1204.429 buffer_time=2.702 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 1200.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1100832 bytes_read=454010 bytes_retransmit=9 bytes_invalid=0 send_seq=26761 receive_seq=26761 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.7 mcu_temp: temp=37.6 sd_pos=258440 sysload=0.35 cputime=77.093 memavail=717984 print_time=1205.907 buffer_time=3.180 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 1201.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1100978 bytes_read=454364 bytes_retransmit=9 bytes_invalid=0 send_seq=26772 receive_seq=26772 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.5 mcu_temp: temp=37.6 sd_pos=258440 sysload=0.32 cputime=77.148 memavail=717984 print_time=1205.907 buffer_time=2.180 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 1202.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1102043 bytes_read=454812 bytes_retransmit=9 bytes_invalid=0 send_seq=26799 receive_seq=26799 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=43.9 mcu_temp: temp=37.6 sd_pos=258699 sysload=0.32 cputime=77.214 memavail=718264 print_time=1206.942 buffer_time=2.213 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 1203.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1104267 bytes_read=455340 bytes_retransmit=9 bytes_invalid=0 send_seq=26845 receive_seq=26845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=43.4 mcu_temp: temp=37.5 sd_pos=259117 sysload=0.32 cputime=77.283 memavail=718516 print_time=1209.040 buffer_time=3.311 print_stall=0 extruder: target=200 temp=200.0 pwm=0.690
Stats 1204.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1104413 bytes_read=455679 bytes_retransmit=9 bytes_invalid=0 send_seq=26856 receive_seq=26856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.0 mcu_temp: temp=37.3 sd_pos=259117 sysload=0.32 cputime=77.343 memavail=718716 print_time=1209.040 buffer_time=2.311 print_stall=0 extruder: target=200 temp=199.9 pwm=0.690
Stats 1205.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1106669 bytes_read=456217 bytes_retransmit=9 bytes_invalid=0 send_seq=26901 receive_seq=26901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.2 mcu_temp: temp=37.4 sd_pos=259542 sysload=0.32 cputime=77.413 memavail=719028 print_time=1210.183 buffer_time=2.453 print_stall=0 extruder: target=200 temp=199.9 pwm=0.690
Stats 1206.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1108543 bytes_read=456730 bytes_retransmit=9 bytes_invalid=0 send_seq=26941 receive_seq=26941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996635 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=43.6 mcu_temp: temp=37.6 sd_pos=260170 sysload=0.30 cputime=77.480 memavail=718788 print_time=1211.112 buffer_time=2.382 print_stall=0 extruder: target=200 temp=199.8 pwm=0.690
Stats 1207.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1109602 bytes_read=457139 bytes_retransmit=9 bytes_invalid=0 send_seq=26966 receive_seq=26966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=43.8 mcu_temp: temp=37.5 sd_pos=260372 sysload=0.30 cputime=77.543 memavail=718788 print_time=1211.786 buffer_time=2.055 print_stall=0 extruder: target=200 temp=199.8 pwm=0.690
Stats 1208.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1112481 bytes_read=457727 bytes_retransmit=9 bytes_invalid=0 send_seq=27021 receive_seq=27021 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.4 mcu_temp: temp=37.5 sd_pos=261305 sysload=0.30 cputime=77.621 memavail=718788 print_time=1213.359 buffer_time=2.627 print_stall=0 extruder: target=200 temp=199.7 pwm=0.722
Stats 1209.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1113510 bytes_read=458145 bytes_retransmit=9 bytes_invalid=0 send_seq=27045 receive_seq=27045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996636 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.7 mcu_temp: temp=37.6 sd_pos=261380 sysload=0.30 cputime=77.682 memavail=718788 print_time=1213.944 buffer_time=2.211 print_stall=0 extruder: target=200 temp=199.6 pwm=0.779
Stats 1210.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1116246 bytes_read=458674 bytes_retransmit=9 bytes_invalid=0 send_seq=27098 receive_seq=27091 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.439 raspberry_pi: temp=43.2 mcu_temp: temp=37.5 sd_pos=261834 sysload=0.30 cputime=77.752 memavail=718792 print_time=1215.864 buffer_time=3.127 print_stall=0 extruder: target=200 temp=199.6 pwm=0.779
Stats 1211.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1116441 bytes_read=459087 bytes_retransmit=9 bytes_invalid=0 send_seq=27111 receive_seq=27111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.4 mcu_temp: temp=37.4 sd_pos=261834 sysload=0.27 cputime=77.811 memavail=718820 print_time=1215.864 buffer_time=2.126 print_stall=0 extruder: target=200 temp=199.7 pwm=0.690
Stats 1212.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1118550 bytes_read=459600 bytes_retransmit=9 bytes_invalid=0 send_seq=27154 receive_seq=27154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.7 mcu_temp: temp=37.4 sd_pos=262617 sysload=0.27 cputime=77.883 memavail=718820 print_time=1216.756 buffer_time=2.018 print_stall=0 extruder: target=200 temp=199.9 pwm=0.690
Stats 1213.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1120529 bytes_read=460089 bytes_retransmit=9 bytes_invalid=0 send_seq=27195 receive_seq=27195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.0 mcu_temp: temp=37.3 sd_pos=262970 sysload=0.27 cputime=77.952 memavail=718828 print_time=1218.261 buffer_time=2.522 print_stall=0 extruder: target=200 temp=200.0 pwm=0.621
Stats 1214.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1122886 bytes_read=460632 bytes_retransmit=9 bytes_invalid=0 send_seq=27241 receive_seq=27241 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.5 mcu_temp: temp=37.5 sd_pos=263847 sysload=0.27 cputime=78.023 memavail=718852 print_time=1219.280 buffer_time=2.540 print_stall=0 extruder: target=200 temp=200.1 pwm=0.621
Stats 1215.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1123879 bytes_read=461055 bytes_retransmit=9 bytes_invalid=0 send_seq=27266 receive_seq=27266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.8 mcu_temp: temp=37.5 sd_pos=263935 sysload=0.27 cputime=78.086 memavail=719392 print_time=1219.978 buffer_time=2.238 print_stall=0 extruder: target=200 temp=200.2 pwm=0.621
Stats 1216.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1125025 bytes_read=461489 bytes_retransmit=9 bytes_invalid=0 send_seq=27293 receive_seq=27293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=264134 sysload=0.25 cputime=78.147 memavail=719392 print_time=1220.842 buffer_time=2.101 print_stall=0 extruder: target=200 temp=200.3 pwm=0.621
Stats 1217.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1127305 bytes_read=462027 bytes_retransmit=9 bytes_invalid=0 send_seq=27338 receive_seq=27338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.8 mcu_temp: temp=37.5 sd_pos=264834 sysload=0.25 cputime=78.217 memavail=719392 print_time=1221.891 buffer_time=2.149 print_stall=0 extruder: target=200 temp=200.3 pwm=0.649
Stats 1218.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1129172 bytes_read=462520 bytes_retransmit=9 bytes_invalid=0 send_seq=27377 receive_seq=27377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=43.4 mcu_temp: temp=37.5 sd_pos=265172 sysload=0.25 cputime=78.288 memavail=719392 print_time=1224.104 buffer_time=3.361 print_stall=0 extruder: target=200 temp=200.3 pwm=0.649
Stats 1219.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1129374 bytes_read=462859 bytes_retransmit=9 bytes_invalid=0 send_seq=27388 receive_seq=27388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=43.3 mcu_temp: temp=37.6 sd_pos=265172 sysload=0.25 cputime=78.345 memavail=719392 print_time=1224.104 buffer_time=2.361 print_stall=0 extruder: target=200 temp=200.3 pwm=0.649
Stats 1220.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1130486 bytes_read=463307 bytes_retransmit=9 bytes_invalid=0 send_seq=27415 receive_seq=27415 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=43.3 mcu_temp: temp=37.5 sd_pos=265466 sysload=0.25 cputime=78.410 memavail=719144 print_time=1225.145 buffer_time=2.401 print_stall=0 extruder: target=200 temp=200.2 pwm=0.649
Stats 1221.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1132655 bytes_read=463840 bytes_retransmit=9 bytes_invalid=0 send_seq=27459 receive_seq=27459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.5 mcu_temp: temp=37.4 sd_pos=265876 sysload=0.23 cputime=78.481 memavail=719148 print_time=1227.241 buffer_time=3.496 print_stall=0 extruder: target=200 temp=200.1 pwm=0.694
Stats 1222.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1132842 bytes_read=464179 bytes_retransmit=9 bytes_invalid=0 send_seq=27470 receive_seq=27470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.9 mcu_temp: temp=37.5 sd_pos=265876 sysload=0.23 cputime=78.540 memavail=719352 print_time=1227.241 buffer_time=2.496 print_stall=0 extruder: target=200 temp=200.1 pwm=0.694
Stats 1223.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1135043 bytes_read=464717 bytes_retransmit=9 bytes_invalid=0 send_seq=27515 receive_seq=27515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.7 mcu_temp: temp=37.4 sd_pos=266296 sysload=0.23 cputime=78.608 memavail=719408 print_time=1228.390 buffer_time=2.643 print_stall=0 extruder: target=200 temp=199.9 pwm=0.750
Stats 1224.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1136216 bytes_read=465147 bytes_retransmit=9 bytes_invalid=0 send_seq=27542 receive_seq=27542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=266725 sysload=0.23 cputime=78.674 memavail=719608 print_time=1228.924 buffer_time=2.177 print_stall=0 extruder: target=200 temp=199.9 pwm=0.750
Stats 1225.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1138082 bytes_read=465611 bytes_retransmit=9 bytes_invalid=0 send_seq=27580 receive_seq=27580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=43.6 mcu_temp: temp=37.5 sd_pos=267123 sysload=0.23 cputime=78.744 memavail=720700 print_time=1230.007 buffer_time=2.259 print_stall=0 extruder: target=200 temp=199.9 pwm=0.750
Stats 1226.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1140094 bytes_read=466164 bytes_retransmit=9 bytes_invalid=0 send_seq=27623 receive_seq=27623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.447 raspberry_pi: temp=43.8 mcu_temp: temp=37.3 sd_pos=267584 sysload=0.21 cputime=78.816 memavail=720168 print_time=1231.002 buffer_time=2.254 print_stall=0 extruder: target=200 temp=199.8 pwm=0.695
Stats 1227.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1142062 bytes_read=466658 bytes_retransmit=9 bytes_invalid=0 send_seq=27665 receive_seq=27665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.3 mcu_temp: temp=37.5 sd_pos=268104 sysload=0.21 cputime=78.887 memavail=720224 print_time=1232.028 buffer_time=2.280 print_stall=0 extruder: target=200 temp=199.8 pwm=0.695
Stats 1228.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1144662 bytes_read=467197 bytes_retransmit=9 bytes_invalid=0 send_seq=27716 receive_seq=27716 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.2 mcu_temp: temp=37.5 sd_pos=268595 sysload=0.21 cputime=78.958 memavail=720424 print_time=1233.840 buffer_time=3.091 print_stall=0 extruder: target=200 temp=199.8 pwm=0.695
Stats 1229.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1144864 bytes_read=467594 bytes_retransmit=9 bytes_invalid=0 send_seq=27730 receive_seq=27730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.435 raspberry_pi: temp=43.5 mcu_temp: temp=37.6 sd_pos=268595 sysload=0.21 cputime=79.016 memavail=720480 print_time=1233.840 buffer_time=2.090 print_stall=0 extruder: target=200 temp=200.0 pwm=0.640
Stats 1230.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1147566 bytes_read=468143 bytes_retransmit=9 bytes_invalid=0 send_seq=27783 receive_seq=27783 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.351 raspberry_pi: temp=43.3 mcu_temp: temp=37.3 sd_pos=269400 sysload=0.21 cputime=79.089 memavail=720480 print_time=1235.375 buffer_time=2.625 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 1231.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1148769 bytes_read=468582 bytes_retransmit=9 bytes_invalid=0 send_seq=27811 receive_seq=27811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=43.2 mcu_temp: temp=37.5 sd_pos=269665 sysload=0.27 cputime=79.152 memavail=719984 print_time=1236.217 buffer_time=2.467 print_stall=0 extruder: target=200 temp=200.2 pwm=0.579
Stats 1232.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1151081 bytes_read=469154 bytes_retransmit=9 bytes_invalid=0 send_seq=27860 receive_seq=27860 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.435 raspberry_pi: temp=43.5 mcu_temp: temp=37.5 sd_pos=270448 sysload=0.27 cputime=79.230 memavail=719520 print_time=1237.227 buffer_time=2.477 print_stall=0 extruder: target=200 temp=200.3 pwm=0.579
Stats 1233.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1152141 bytes_read=469568 bytes_retransmit=9 bytes_invalid=0 send_seq=27886 receive_seq=27886 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.8 mcu_temp: temp=37.5 sd_pos=270536 sysload=0.27 cputime=79.290 memavail=719268 print_time=1237.927 buffer_time=2.176 print_stall=0 extruder: target=200 temp=200.3 pwm=0.636
Stats 1234.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1153287 bytes_read=469987 bytes_retransmit=9 bytes_invalid=0 send_seq=27913 receive_seq=27913 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.1 mcu_temp: temp=37.3 sd_pos=270735 sysload=0.27 cputime=79.353 memavail=719268 print_time=1238.792 buffer_time=2.041 print_stall=0 extruder: target=200 temp=200.3 pwm=0.636
Stats 1235.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1155582 bytes_read=470549 bytes_retransmit=9 bytes_invalid=0 send_seq=27960 receive_seq=27960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.2 mcu_temp: temp=37.6 sd_pos=271418 sysload=0.27 cputime=79.425 memavail=719016 print_time=1239.832 buffer_time=2.081 print_stall=0 extruder: target=200 temp=200.3 pwm=0.636
Stats 1236.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1157529 bytes_read=471048 bytes_retransmit=9 bytes_invalid=0 send_seq=28000 receive_seq=28000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.6 mcu_temp: temp=37.4 sd_pos=271786 sysload=0.25 cputime=79.493 memavail=718776 print_time=1242.059 buffer_time=3.307 print_stall=0 extruder: target=200 temp=200.1 pwm=0.710
Stats 1237.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1157707 bytes_read=471397 bytes_retransmit=9 bytes_invalid=0 send_seq=28013 receive_seq=28013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.351 raspberry_pi: temp=44.0 mcu_temp: temp=37.5 sd_pos=271786 sysload=0.25 cputime=79.549 memavail=718776 print_time=1242.059 buffer_time=2.306 print_stall=0 extruder: target=200 temp=200.1 pwm=0.710
Stats 1238.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1158775 bytes_read=471854 bytes_retransmit=9 bytes_invalid=0 send_seq=28039 receive_seq=28039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.8 mcu_temp: temp=37.6 sd_pos=271986 sysload=0.25 cputime=79.613 memavail=718524 print_time=1243.080 buffer_time=2.326 print_stall=0 extruder: target=200 temp=200.0 pwm=0.710
Stats 1239.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1160768 bytes_read=472343 bytes_retransmit=9 bytes_invalid=0 send_seq=28080 receive_seq=28080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.7 mcu_temp: temp=37.3 sd_pos=272389 sysload=0.25 cputime=79.680 memavail=718524 print_time=1245.196 buffer_time=3.441 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 1240.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1160950 bytes_read=472677 bytes_retransmit=9 bytes_invalid=0 send_seq=28090 receive_seq=28090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.8 mcu_temp: temp=37.4 sd_pos=272389 sysload=0.25 cputime=79.738 memavail=718272 print_time=1245.196 buffer_time=2.440 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 1241.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1163230 bytes_read=473259 bytes_retransmit=9 bytes_invalid=0 send_seq=28138 receive_seq=28138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=43.7 mcu_temp: temp=37.4 sd_pos=272776 sysload=0.23 cputime=79.810 memavail=718028 print_time=1246.352 buffer_time=2.596 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 1242.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1164466 bytes_read=473683 bytes_retransmit=9 bytes_invalid=0 send_seq=28166 receive_seq=28166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.4 mcu_temp: temp=37.5 sd_pos=273207 sysload=0.23 cputime=79.872 memavail=718028 print_time=1246.895 buffer_time=2.138 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 1243.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1166367 bytes_read=474152 bytes_retransmit=9 bytes_invalid=0 send_seq=28203 receive_seq=28203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.4 mcu_temp: temp=37.4 sd_pos=273606 sysload=0.23 cputime=79.938 memavail=718028 print_time=1247.986 buffer_time=2.228 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 1244.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1168370 bytes_read=474679 bytes_retransmit=9 bytes_invalid=0 send_seq=28243 receive_seq=28243 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.0 mcu_temp: temp=37.4 sd_pos=274108 sysload=0.23 cputime=80.007 memavail=717780 print_time=1249.020 buffer_time=2.262 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 1245.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1170427 bytes_read=475168 bytes_retransmit=9 bytes_invalid=0 send_seq=28284 receive_seq=28284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.8 mcu_temp: temp=37.4 sd_pos=274467 sysload=0.23 cputime=80.077 memavail=717588 print_time=1250.007 buffer_time=2.249 print_stall=0 extruder: target=200 temp=199.8 pwm=0.713
Stats 1246.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1172793 bytes_read=475718 bytes_retransmit=9 bytes_invalid=0 send_seq=28331 receive_seq=28331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=43.7 mcu_temp: temp=37.3 sd_pos=274956 sysload=0.45 cputime=80.154 memavail=717588 print_time=1251.765 buffer_time=3.005 print_stall=0 extruder: target=200 temp=199.8 pwm=0.713
Stats 1247.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1172979 bytes_read=476090 bytes_retransmit=9 bytes_invalid=0 send_seq=28343 receive_seq=28343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=43.7 mcu_temp: temp=37.5 sd_pos=274956 sysload=0.45 cputime=80.210 memavail=717596 print_time=1251.765 buffer_time=2.005 print_stall=0 extruder: target=200 temp=199.9 pwm=0.661
Stats 1248.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1175869 bytes_read=476644 bytes_retransmit=9 bytes_invalid=0 send_seq=28397 receive_seq=28397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=43.7 mcu_temp: temp=37.5 sd_pos=275761 sysload=0.45 cputime=80.283 memavail=717596 print_time=1253.355 buffer_time=2.594 print_stall=0 extruder: target=200 temp=200.0 pwm=0.605
Stats 1249.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1177096 bytes_read=477083 bytes_retransmit=9 bytes_invalid=0 send_seq=28425 receive_seq=28425 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996624 heater_bed: target=60 temp=60.0 pwm=0.285 raspberry_pi: temp=43.6 mcu_temp: temp=37.6 sd_pos=276060 sysload=0.45 cputime=80.346 memavail=717596 print_time=1254.197 buffer_time=2.436 print_stall=0 extruder: target=200 temp=200.2 pwm=0.605
Stats 1250.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1179233 bytes_read=477600 bytes_retransmit=9 bytes_invalid=0 send_seq=28468 receive_seq=28468 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.6 mcu_temp: temp=37.5 sd_pos=276774 sysload=0.45 cputime=80.418 memavail=717596 print_time=1255.170 buffer_time=2.409 print_stall=0 extruder: target=200 temp=200.3 pwm=0.605
Stats 1251.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1180258 bytes_read=478011 bytes_retransmit=9 bytes_invalid=0 send_seq=28492 receive_seq=28492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.2 mcu_temp: temp=37.3 sd_pos=276864 sysload=0.42 cputime=80.483 memavail=717600 print_time=1255.872 buffer_time=2.110 print_stall=0 extruder: target=200 temp=200.3 pwm=0.605
Stats 1252.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1181862 bytes_read=478484 bytes_retransmit=9 bytes_invalid=0 send_seq=28527 receive_seq=28527 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=44.0 mcu_temp: temp=37.6 sd_pos=277259 sysload=0.42 cputime=80.554 memavail=717608 print_time=1256.932 buffer_time=2.169 print_stall=0 extruder: target=200 temp=200.3 pwm=0.634
Stats 1253.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1184409 bytes_read=478996 bytes_retransmit=9 bytes_invalid=0 send_seq=28577 receive_seq=28567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=43.5 mcu_temp: temp=37.6 sd_pos=277825 sysload=0.42 cputime=80.630 memavail=717808 print_time=1258.505 buffer_time=2.742 print_stall=0 extruder: target=200 temp=200.2 pwm=0.634
Stats 1254.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1185481 bytes_read=479460 bytes_retransmit=9 bytes_invalid=0 send_seq=28603 receive_seq=28603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.5 mcu_temp: temp=37.5 sd_pos=278054 sysload=0.42 cputime=80.698 memavail=717788 print_time=1259.984 buffer_time=3.221 print_stall=0 extruder: target=200 temp=200.1 pwm=0.697
Stats 1255.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1185712 bytes_read=479819 bytes_retransmit=9 bytes_invalid=0 send_seq=28615 receive_seq=28615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=44.1 mcu_temp: temp=37.6 sd_pos=278054 sysload=0.42 cputime=80.762 memavail=717788 print_time=1259.984 buffer_time=2.221 print_stall=0 extruder: target=200 temp=200.1 pwm=0.697
Stats 1256.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1186966 bytes_read=480286 bytes_retransmit=9 bytes_invalid=0 send_seq=28643 receive_seq=28643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.0 mcu_temp: temp=37.8 sd_pos=278327 sysload=0.38 cputime=80.834 memavail=717460 print_time=1261.120 buffer_time=2.355 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 1257.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1188791 bytes_read=480755 bytes_retransmit=9 bytes_invalid=0 send_seq=28680 receive_seq=28680 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.0 mcu_temp: temp=37.6 sd_pos=278661 sysload=0.38 cputime=80.908 memavail=717468 print_time=1263.100 buffer_time=3.335 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 1258.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1189016 bytes_read=481109 bytes_retransmit=9 bytes_invalid=0 send_seq=28691 receive_seq=28691 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.7 mcu_temp: temp=37.6 sd_pos=278661 sysload=0.38 cputime=80.974 memavail=717216 print_time=1263.100 buffer_time=2.334 print_stall=0 extruder: target=200 temp=199.9 pwm=0.706
Stats 1259.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1191337 bytes_read=481667 bytes_retransmit=9 bytes_invalid=0 send_seq=28738 receive_seq=28738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.6 mcu_temp: temp=37.7 sd_pos=279052 sysload=0.38 cputime=81.049 memavail=717220 print_time=1264.265 buffer_time=2.499 print_stall=0 extruder: target=200 temp=199.9 pwm=0.706
Stats 1260.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1192579 bytes_read=482091 bytes_retransmit=9 bytes_invalid=0 send_seq=28766 receive_seq=28766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.7 mcu_temp: temp=37.7 sd_pos=279481 sysload=0.38 cputime=81.122 memavail=716968 print_time=1264.819 buffer_time=2.052 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1261.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1194370 bytes_read=482585 bytes_retransmit=9 bytes_invalid=0 send_seq=28802 receive_seq=28802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=44.0 mcu_temp: temp=37.6 sd_pos=279883 sysload=0.35 cputime=81.198 memavail=716956 print_time=1265.919 buffer_time=2.152 print_stall=0 extruder: target=200 temp=199.9 pwm=0.706
Stats 1262.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1196464 bytes_read=483107 bytes_retransmit=9 bytes_invalid=0 send_seq=28844 receive_seq=28844 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=43.9 mcu_temp: temp=37.5 sd_pos=280351 sysload=0.35 cputime=81.274 memavail=716880 print_time=1266.967 buffer_time=2.199 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1263.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1198644 bytes_read=483601 bytes_retransmit=9 bytes_invalid=0 send_seq=28886 receive_seq=28886 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=43.8 mcu_temp: temp=37.6 sd_pos=280827 sysload=0.35 cputime=81.355 memavail=716880 print_time=1268.135 buffer_time=2.366 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1264.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1200609 bytes_read=484105 bytes_retransmit=9 bytes_invalid=0 send_seq=28927 receive_seq=28927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.2 mcu_temp: temp=37.8 sd_pos=281033 sysload=0.35 cputime=81.430 memavail=716880 print_time=1269.459 buffer_time=2.689 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1265.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1202151 bytes_read=484582 bytes_retransmit=9 bytes_invalid=0 send_seq=28960 receive_seq=28960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.2 mcu_temp: temp=37.6 sd_pos=281415 sysload=0.35 cputime=81.504 memavail=716880 print_time=1270.540 buffer_time=2.770 print_stall=0 extruder: target=200 temp=199.9 pwm=0.649
Stats 1266.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1204102 bytes_read=485083 bytes_retransmit=9 bytes_invalid=0 send_seq=29000 receive_seq=29000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=43.9 mcu_temp: temp=37.6 sd_pos=282036 sysload=0.40 cputime=81.581 memavail=716628 print_time=1271.418 buffer_time=2.648 print_stall=0 extruder: target=200 temp=200.0 pwm=0.649
Stats 1267.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1205044 bytes_read=485497 bytes_retransmit=9 bytes_invalid=0 send_seq=29023 receive_seq=29023 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.2 mcu_temp: temp=37.7 sd_pos=282130 sysload=0.40 cputime=81.651 memavail=716920 print_time=1272.087 buffer_time=2.316 print_stall=0 extruder: target=200 temp=200.1 pwm=0.649
Stats 1268.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1206217 bytes_read=485944 bytes_retransmit=9 bytes_invalid=0 send_seq=29050 receive_seq=29050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.1 mcu_temp: temp=37.6 sd_pos=282424 sysload=0.40 cputime=81.722 memavail=716920 print_time=1272.937 buffer_time=2.166 print_stall=0 extruder: target=200 temp=200.2 pwm=0.630
Stats 1269.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1208078 bytes_read=486418 bytes_retransmit=9 bytes_invalid=0 send_seq=29088 receive_seq=29088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.459 raspberry_pi: temp=43.9 mcu_temp: temp=37.5 sd_pos=283009 sysload=0.40 cputime=81.797 memavail=717676 print_time=1273.851 buffer_time=2.078 print_stall=0 extruder: target=200 temp=200.2 pwm=0.630
Stats 1270.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1210071 bytes_read=486917 bytes_retransmit=9 bytes_invalid=0 send_seq=29128 receive_seq=29128 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=44.5 mcu_temp: temp=37.6 sd_pos=283270 sysload=0.40 cputime=81.870 memavail=717424 print_time=1275.411 buffer_time=2.637 print_stall=0 extruder: target=200 temp=200.3 pwm=0.630
Stats 1271.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1212098 bytes_read=487444 bytes_retransmit=9 bytes_invalid=0 send_seq=29168 receive_seq=29168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=44.1 mcu_temp: temp=37.8 sd_pos=283855 sysload=0.37 cputime=81.947 memavail=717624 print_time=1276.428 buffer_time=2.652 print_stall=0 extruder: target=200 temp=200.3 pwm=0.630
Stats 1272.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1213062 bytes_read=487843 bytes_retransmit=9 bytes_invalid=0 send_seq=29191 receive_seq=29191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=44.9 mcu_temp: temp=37.7 sd_pos=283967 sysload=0.37 cputime=82.016 memavail=717972 print_time=1277.176 buffer_time=2.400 print_stall=0 extruder: target=200 temp=200.3 pwm=0.630
Stats 1273.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1214211 bytes_read=488282 bytes_retransmit=9 bytes_invalid=0 send_seq=29219 receive_seq=29219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.5 mcu_temp: temp=37.7 sd_pos=284231 sysload=0.37 cputime=82.088 memavail=717972 print_time=1278.663 buffer_time=2.885 print_stall=0 extruder: target=200 temp=200.2 pwm=0.635
Stats 1274.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1215562 bytes_read=488744 bytes_retransmit=9 bytes_invalid=0 send_seq=29249 receive_seq=29249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996641 heater_bed: target=60 temp=60.0 pwm=0.490 raspberry_pi: temp=43.6 mcu_temp: temp=37.7 sd_pos=284537 sysload=0.37 cputime=82.159 memavail=718480 print_time=1279.821 buffer_time=3.042 print_stall=0 extruder: target=200 temp=200.3 pwm=0.635
Stats 1275.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1215790 bytes_read=489091 bytes_retransmit=9 bytes_invalid=0 send_seq=29262 receive_seq=29262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996645 heater_bed: target=60 temp=60.0 pwm=0.268 raspberry_pi: temp=44.2 mcu_temp: temp=37.7 sd_pos=284537 sysload=0.37 cputime=82.225 memavail=718476 print_time=1279.821 buffer_time=2.041 print_stall=0 extruder: target=200 temp=200.2 pwm=0.691
Stats 1276.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1216770 bytes_read=489514 bytes_retransmit=9 bytes_invalid=0 send_seq=29286 receive_seq=29286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.5 mcu_temp: temp=37.9 sd_pos=284670 sysload=0.42 cputime=82.295 memavail=718764 print_time=1281.297 buffer_time=2.515 print_stall=0 extruder: target=200 temp=200.1 pwm=0.691
Stats 1277.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1217979 bytes_read=489966 bytes_retransmit=9 bytes_invalid=0 send_seq=29315 receive_seq=29315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.4 mcu_temp: temp=37.5 sd_pos=284779 sysload=0.42 cputime=82.366 memavail=718324 print_time=1282.047 buffer_time=2.263 print_stall=0 extruder: target=200 temp=200.1 pwm=0.691
Stats 1278.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1220289 bytes_read=490475 bytes_retransmit=9 bytes_invalid=0 send_seq=29360 receive_seq=29360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996631 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.9 mcu_temp: temp=37.7 sd_pos=285325 sysload=0.42 cputime=82.441 memavail=718836 print_time=1283.255 buffer_time=2.466 print_stall=0 extruder: target=200 temp=200.0 pwm=0.691
Stats 1279.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1222024 bytes_read=490959 bytes_retransmit=9 bytes_invalid=0 send_seq=29397 receive_seq=29397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.2 mcu_temp: temp=37.6 sd_pos=285662 sysload=0.42 cputime=82.513 memavail=718584 print_time=1284.064 buffer_time=2.274 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1280.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1224267 bytes_read=491491 bytes_retransmit=9 bytes_invalid=0 send_seq=29441 receive_seq=29441 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.2 mcu_temp: temp=37.7 sd_pos=285959 sysload=0.42 cputime=82.587 memavail=718836 print_time=1285.259 buffer_time=2.466 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1281.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1226292 bytes_read=491995 bytes_retransmit=9 bytes_invalid=0 send_seq=29482 receive_seq=29482 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.3 mcu_temp: temp=37.8 sd_pos=286436 sysload=0.47 cputime=82.660 memavail=718320 print_time=1286.270 buffer_time=2.475 print_stall=0 extruder: target=200 temp=199.8 pwm=0.696
Stats 1282.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1227547 bytes_read=492429 bytes_retransmit=9 bytes_invalid=0 send_seq=29509 receive_seq=29509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.5 mcu_temp: temp=37.8 sd_pos=286686 sysload=0.47 cputime=82.729 memavail=717892 print_time=1286.803 buffer_time=2.005 print_stall=0 extruder: target=200 temp=199.8 pwm=0.696
Stats 1283.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1229926 bytes_read=492981 bytes_retransmit=9 bytes_invalid=0 send_seq=29557 receive_seq=29557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=44.1 mcu_temp: temp=37.8 sd_pos=287109 sysload=0.47 cputime=82.808 memavail=717892 print_time=1288.321 buffer_time=2.519 print_stall=0 extruder: target=200 temp=199.7 pwm=0.731
Stats 1284.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1230848 bytes_read=493380 bytes_retransmit=9 bytes_invalid=0 send_seq=29580 receive_seq=29580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=44.0 mcu_temp: temp=37.8 sd_pos=287235 sysload=0.47 cputime=82.879 memavail=717892 print_time=1288.890 buffer_time=2.084 print_stall=0 extruder: target=200 temp=199.8 pwm=0.673
Stats 1285.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1232941 bytes_read=493918 bytes_retransmit=9 bytes_invalid=0 send_seq=29622 receive_seq=29622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.444 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=287647 sysload=0.47 cputime=82.956 memavail=718208 print_time=1290.436 buffer_time=2.628 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1286.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1234857 bytes_read=494416 bytes_retransmit=9 bytes_invalid=0 send_seq=29662 receive_seq=29662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 sd_pos=288233 sysload=0.59 cputime=83.032 memavail=718248 print_time=1291.306 buffer_time=2.496 print_stall=0 extruder: target=200 temp=200.1 pwm=0.616
Stats 1287.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1235869 bytes_read=494815 bytes_retransmit=9 bytes_invalid=0 send_seq=29685 receive_seq=29685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.3 mcu_temp: temp=37.9 sd_pos=288321 sysload=0.59 cputime=83.102 memavail=718472 print_time=1291.977 buffer_time=2.165 print_stall=0 extruder: target=200 temp=200.1 pwm=0.616
Stats 1288.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1237050 bytes_read=495263 bytes_retransmit=9 bytes_invalid=0 send_seq=29712 receive_seq=29712 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=43.7 mcu_temp: temp=37.6 sd_pos=288618 sysload=0.59 cputime=83.173 memavail=718772 print_time=1292.835 buffer_time=2.019 print_stall=0 extruder: target=200 temp=200.2 pwm=0.616
Stats 1289.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1239803 bytes_read=495826 bytes_retransmit=9 bytes_invalid=0 send_seq=29765 receive_seq=29765 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.6 mcu_temp: temp=37.7 sd_pos=289294 sysload=0.59 cputime=83.253 memavail=718772 print_time=1294.443 buffer_time=2.625 print_stall=0 extruder: target=200 temp=200.2 pwm=0.616
Stats 1290.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1240947 bytes_read=496240 bytes_retransmit=9 bytes_invalid=0 send_seq=29791 receive_seq=29791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.5 mcu_temp: temp=37.7 sd_pos=289461 sysload=0.59 cputime=83.321 memavail=719028 print_time=1295.299 buffer_time=2.477 print_stall=0 extruder: target=200 temp=200.2 pwm=0.608
Stats 1291.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1242759 bytes_read=496753 bytes_retransmit=9 bytes_invalid=0 send_seq=29828 receive_seq=29828 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=43.3 mcu_temp: temp=37.8 sd_pos=289949 sysload=0.70 cputime=83.396 memavail=719480 print_time=1296.238 buffer_time=2.415 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 1292.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1243771 bytes_read=497176 bytes_retransmit=9 bytes_invalid=0 send_seq=29853 receive_seq=29853 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=43.9 mcu_temp: temp=37.9 sd_pos=290055 sysload=0.70 cputime=83.467 memavail=719672 print_time=1296.989 buffer_time=2.163 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 1293.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1244836 bytes_read=497585 bytes_retransmit=9 bytes_invalid=0 send_seq=29878 receive_seq=29878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.5 mcu_temp: temp=37.6 sd_pos=290286 sysload=0.70 cputime=83.538 memavail=719672 print_time=1298.469 buffer_time=2.640 print_stall=0 extruder: target=200 temp=200.0 pwm=0.721
Stats 1294.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1245841 bytes_read=498018 bytes_retransmit=9 bytes_invalid=0 send_seq=29902 receive_seq=29902 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.8 mcu_temp: temp=37.7 sd_pos=290511 sysload=0.70 cputime=83.609 memavail=719672 print_time=1299.580 buffer_time=2.748 print_stall=0 extruder: target=200 temp=199.9 pwm=0.721
Stats 1295.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1247301 bytes_read=498471 bytes_retransmit=9 bytes_invalid=0 send_seq=29933 receive_seq=29933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=290698 sysload=0.70 cputime=83.682 memavail=719672 print_time=1301.344 buffer_time=3.508 print_stall=0 extruder: target=200 temp=199.7 pwm=0.721
Stats 1296.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1247494 bytes_read=498820 bytes_retransmit=9 bytes_invalid=0 send_seq=29943 receive_seq=29943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.9 mcu_temp: temp=37.9 sd_pos=290698 sysload=0.73 cputime=83.749 memavail=719672 print_time=1301.344 buffer_time=2.505 print_stall=0 extruder: target=200 temp=199.6 pwm=0.776
Stats 1297.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1248793 bytes_read=499273 bytes_retransmit=9 bytes_invalid=0 send_seq=29971 receive_seq=29971 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.2 mcu_temp: temp=37.8 sd_pos=291052 sysload=0.73 cputime=83.823 memavail=719680 print_time=1301.915 buffer_time=2.073 print_stall=0 extruder: target=200 temp=199.6 pwm=0.776
Stats 1298.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1251543 bytes_read=499836 bytes_retransmit=9 bytes_invalid=0 send_seq=30024 receive_seq=30024 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=43.8 mcu_temp: temp=37.7 sd_pos=291716 sysload=0.73 cputime=83.903 memavail=719684 print_time=1303.217 buffer_time=2.373 print_stall=0 extruder: target=200 temp=199.6 pwm=0.709
Stats 1299.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1253591 bytes_read=500265 bytes_retransmit=9 bytes_invalid=0 send_seq=30065 receive_seq=30053 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=151 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=43.5 mcu_temp: temp=37.7 sd_pos=292118 sysload=0.73 cputime=83.979 memavail=719688 print_time=1304.304 buffer_time=2.451 print_stall=0 extruder: target=200 temp=199.7 pwm=0.709
Stats 1300.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1255032 bytes_read=500822 bytes_retransmit=9 bytes_invalid=0 send_seq=30096 receive_seq=30096 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=43.7 mcu_temp: temp=37.7 sd_pos=292199 sysload=0.73 cputime=84.052 memavail=719688 print_time=1304.991 buffer_time=2.135 print_stall=0 extruder: target=200 temp=199.7 pwm=0.709
Stats 1301.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1256984 bytes_read=501289 bytes_retransmit=9 bytes_invalid=0 send_seq=30135 receive_seq=30134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.6 mcu_temp: temp=37.7 sd_pos=292699 sysload=0.67 cputime=84.133 memavail=720140 print_time=1305.875 buffer_time=2.019 print_stall=0 extruder: target=200 temp=199.8 pwm=0.709
Stats 1302.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1259151 bytes_read=501793 bytes_retransmit=9 bytes_invalid=0 send_seq=30177 receive_seq=30177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.6 mcu_temp: temp=37.8 sd_pos=292904 sysload=0.67 cputime=84.210 memavail=720200 print_time=1307.305 buffer_time=2.447 print_stall=0 extruder: target=200 temp=199.8 pwm=0.694
Stats 1303.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1260479 bytes_read=502250 bytes_retransmit=9 bytes_invalid=0 send_seq=30206 receive_seq=30206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=293236 sysload=0.67 cputime=84.283 memavail=720204 print_time=1308.313 buffer_time=2.454 print_stall=0 extruder: target=200 temp=199.9 pwm=0.694
Stats 1304.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1262350 bytes_read=502724 bytes_retransmit=9 bytes_invalid=0 send_seq=30244 receive_seq=30244 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.3 mcu_temp: temp=37.7 sd_pos=293820 sysload=0.67 cputime=84.359 memavail=720204 print_time=1309.178 buffer_time=2.316 print_stall=0 extruder: target=200 temp=199.9 pwm=0.694
Stats 1305.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1264335 bytes_read=503248 bytes_retransmit=9 bytes_invalid=0 send_seq=30286 receive_seq=30286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.485 raspberry_pi: temp=43.6 mcu_temp: temp=37.8 sd_pos=294210 sysload=0.67 cputime=84.436 memavail=719956 print_time=1310.694 buffer_time=2.828 print_stall=0 extruder: target=200 temp=200.0 pwm=0.642
Stats 1306.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1265034 bytes_read=503660 bytes_retransmit=9 bytes_invalid=0 send_seq=30306 receive_seq=30306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=43.7 mcu_temp: temp=37.9 sd_pos=294369 sysload=0.62 cputime=84.503 memavail=720208 print_time=1310.882 buffer_time=2.015 print_stall=0 extruder: target=200 temp=200.1 pwm=0.642
Stats 1307.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1267328 bytes_read=504174 bytes_retransmit=9 bytes_invalid=0 send_seq=30352 receive_seq=30352 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.296 raspberry_pi: temp=43.0 mcu_temp: temp=37.7 sd_pos=294883 sysload=0.62 cputime=84.577 memavail=720208 print_time=1312.313 buffer_time=2.445 print_stall=0 extruder: target=200 temp=200.2 pwm=0.642
Stats 1308.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1268462 bytes_read=504608 bytes_retransmit=9 bytes_invalid=0 send_seq=30379 receive_seq=30379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.9 mcu_temp: temp=37.8 sd_pos=295051 sysload=0.62 cputime=84.643 memavail=720216 print_time=1313.168 buffer_time=2.300 print_stall=0 extruder: target=200 temp=200.3 pwm=0.642
Stats 1309.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1270285 bytes_read=505110 bytes_retransmit=9 bytes_invalid=0 send_seq=30417 receive_seq=30417 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=295539 sysload=0.62 cputime=84.715 memavail=720216 print_time=1314.104 buffer_time=2.234 print_stall=0 extruder: target=200 temp=200.4 pwm=0.583
Stats 1310.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1272131 bytes_read=505594 bytes_retransmit=9 bytes_invalid=0 send_seq=30454 receive_seq=30454 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.7 mcu_temp: temp=37.9 sd_pos=295880 sysload=0.62 cputime=84.784 memavail=720416 print_time=1316.340 buffer_time=3.469 print_stall=0 extruder: target=200 temp=200.4 pwm=0.583
Stats 1311.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1272303 bytes_read=505943 bytes_retransmit=9 bytes_invalid=0 send_seq=30464 receive_seq=30464 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 sd_pos=295880 sysload=0.57 cputime=84.843 memavail=720720 print_time=1316.340 buffer_time=2.468 print_stall=0 extruder: target=200 temp=200.4 pwm=0.583
Stats 1312.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1273361 bytes_read=506380 bytes_retransmit=9 bytes_invalid=0 send_seq=30489 receive_seq=30489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=43.7 mcu_temp: temp=37.8 sd_pos=296108 sysload=0.57 cputime=84.914 memavail=720468 print_time=1317.452 buffer_time=2.578 print_stall=0 extruder: target=200 temp=200.3 pwm=0.639
Stats 1313.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1274819 bytes_read=506819 bytes_retransmit=9 bytes_invalid=0 send_seq=30521 receive_seq=30520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=43.9 mcu_temp: temp=37.7 sd_pos=296293 sysload=0.57 cputime=84.983 memavail=720476 print_time=1319.217 buffer_time=3.342 print_stall=0 extruder: target=200 temp=200.2 pwm=0.694
Stats 1314.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1274997 bytes_read=507183 bytes_retransmit=9 bytes_invalid=0 send_seq=30533 receive_seq=30533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.449 raspberry_pi: temp=43.2 mcu_temp: temp=37.9 sd_pos=296293 sysload=0.57 cputime=85.043 memavail=720232 print_time=1319.217 buffer_time=2.340 print_stall=0 extruder: target=200 temp=200.1 pwm=0.694
Stats 1315.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1276944 bytes_read=507700 bytes_retransmit=9 bytes_invalid=0 send_seq=30574 receive_seq=30574 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=43.8 mcu_temp: temp=37.9 sd_pos=296909 sysload=0.57 cputime=85.112 memavail=719980 print_time=1320.063 buffer_time=2.185 print_stall=0 extruder: target=200 temp=200.0 pwm=0.694
Stats 1316.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1278559 bytes_read=508185 bytes_retransmit=9 bytes_invalid=0 send_seq=30609 receive_seq=30609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=43.6 mcu_temp: temp=38.0 sd_pos=297046 sysload=0.52 cputime=85.177 memavail=720484 print_time=1320.952 buffer_time=2.073 print_stall=0 extruder: target=200 temp=199.9 pwm=0.694
Stats 1317.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1281317 bytes_read=508754 bytes_retransmit=9 bytes_invalid=0 send_seq=30663 receive_seq=30663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=43.5 mcu_temp: temp=37.8 sd_pos=297677 sysload=0.52 cputime=85.248 memavail=720236 print_time=1322.261 buffer_time=2.380 print_stall=0 extruder: target=200 temp=199.9 pwm=0.752
Stats 1318.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1282593 bytes_read=509211 bytes_retransmit=9 bytes_invalid=0 send_seq=30692 receive_seq=30692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.353 raspberry_pi: temp=43.2 mcu_temp: temp=37.8 sd_pos=297754 sysload=0.52 cputime=85.310 memavail=720288 print_time=1322.948 buffer_time=2.066 print_stall=0 extruder: target=200 temp=199.7 pwm=0.752
Stats 1319.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1285681 bytes_read=509785 bytes_retransmit=9 bytes_invalid=0 send_seq=30752 receive_seq=30750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=43.6 mcu_temp: temp=37.7 sd_pos=298449 sysload=0.52 cputime=85.387 memavail=720540 print_time=1324.465 buffer_time=2.580 print_stall=0 extruder: target=200 temp=199.8 pwm=0.698
Stats 1320.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1286811 bytes_read=510219 bytes_retransmit=9 bytes_invalid=0 send_seq=30777 receive_seq=30777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=43.8 mcu_temp: temp=37.5 sd_pos=298529 sysload=0.52 cputime=85.448 memavail=720540 print_time=1325.095 buffer_time=2.209 print_stall=0 extruder: target=200 temp=199.8 pwm=0.698
Stats 1321.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1288596 bytes_read=510742 bytes_retransmit=9 bytes_invalid=0 send_seq=30816 receive_seq=30816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 sd_pos=298738 sysload=0.48 cputime=85.519 memavail=720796 print_time=1326.223 buffer_time=2.335 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1322.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1289945 bytes_read=511176 bytes_retransmit=9 bytes_invalid=0 send_seq=30846 receive_seq=30846 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=43.0 mcu_temp: temp=37.7 sd_pos=299069 sysload=0.48 cputime=85.582 memavail=720552 print_time=1327.232 buffer_time=2.343 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1323.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1291867 bytes_read=511675 bytes_retransmit=9 bytes_invalid=0 send_seq=30886 receive_seq=30886 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=299686 sysload=0.48 cputime=85.653 memavail=720756 print_time=1328.104 buffer_time=2.214 print_stall=0 extruder: target=200 temp=200.1 pwm=0.597
Stats 1324.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1293790 bytes_read=512182 bytes_retransmit=9 bytes_invalid=0 send_seq=30925 receive_seq=30925 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 sd_pos=300073 sysload=0.48 cputime=85.720 memavail=720592 print_time=1329.622 buffer_time=2.730 print_stall=0 extruder: target=200 temp=200.1 pwm=0.597
Stats 1325.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1295716 bytes_read=512661 bytes_retransmit=9 bytes_invalid=0 send_seq=30964 receive_seq=30964 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.445 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=300656 sysload=0.48 cputime=85.789 memavail=719964 print_time=1330.535 buffer_time=2.642 print_stall=0 extruder: target=200 temp=200.3 pwm=0.597
Stats 1326.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1296768 bytes_read=513099 bytes_retransmit=9 bytes_invalid=0 send_seq=30989 receive_seq=30989 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=300746 sysload=0.44 cputime=85.850 memavail=719712 print_time=1331.246 buffer_time=2.351 print_stall=0 extruder: target=200 temp=200.4 pwm=0.597
Stats 1327.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1297912 bytes_read=513529 bytes_retransmit=9 bytes_invalid=0 send_seq=31015 receive_seq=31015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=43.9 mcu_temp: temp=37.9 sd_pos=300914 sysload=0.44 cputime=85.912 memavail=719208 print_time=1332.102 buffer_time=2.205 print_stall=0 extruder: target=200 temp=200.4 pwm=0.604
Stats 1328.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1299782 bytes_read=514000 bytes_retransmit=9 bytes_invalid=0 send_seq=31053 receive_seq=31053 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=43.6 mcu_temp: temp=37.8 sd_pos=301468 sysload=0.44 cputime=85.983 memavail=718988 print_time=1333.042 buffer_time=2.143 print_stall=0 extruder: target=200 temp=200.4 pwm=0.604
Stats 1329.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1301630 bytes_read=514484 bytes_retransmit=9 bytes_invalid=0 send_seq=31090 receive_seq=31090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=43.7 mcu_temp: temp=37.8 sd_pos=301808 sysload=0.44 cputime=86.050 memavail=718724 print_time=1335.270 buffer_time=3.370 print_stall=0 extruder: target=200 temp=200.3 pwm=0.665
Stats 1330.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1301826 bytes_read=514866 bytes_retransmit=9 bytes_invalid=0 send_seq=31101 receive_seq=31101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.423 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 sd_pos=301808 sysload=0.44 cputime=86.110 memavail=718496 print_time=1335.270 buffer_time=2.367 print_stall=0 extruder: target=200 temp=200.2 pwm=0.665
Stats 1331.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1302854 bytes_read=515270 bytes_retransmit=9 bytes_invalid=0 send_seq=31125 receive_seq=31125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.343 raspberry_pi: temp=43.2 mcu_temp: temp=37.9 sd_pos=302003 sysload=0.40 cputime=86.171 memavail=718456 print_time=1336.373 buffer_time=2.469 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 1332.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1304306 bytes_read=515729 bytes_retransmit=9 bytes_invalid=0 send_seq=31157 receive_seq=31157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=302190 sysload=0.40 cputime=86.242 memavail=718540 print_time=1338.142 buffer_time=3.237 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 1333.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1304474 bytes_read=516096 bytes_retransmit=9 bytes_invalid=0 send_seq=31168 receive_seq=31168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 sd_pos=302190 sysload=0.40 cputime=86.298 memavail=718812 print_time=1338.142 buffer_time=2.236 print_stall=0 extruder: target=200 temp=199.9 pwm=0.723
Stats 1334.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1306574 bytes_read=516590 bytes_retransmit=9 bytes_invalid=0 send_seq=31210 receive_seq=31210 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=43.9 mcu_temp: temp=37.7 sd_pos=302803 sysload=0.40 cputime=86.365 memavail=718812 print_time=1339.047 buffer_time=2.139 print_stall=0 extruder: target=200 temp=199.8 pwm=0.723
Stats 1335.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1308885 bytes_read=517143 bytes_retransmit=9 bytes_invalid=0 send_seq=31255 receive_seq=31255 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=37.7 sd_pos=303162 sysload=0.40 cputime=86.434 memavail=719316 print_time=1340.195 buffer_time=2.285 print_stall=0 extruder: target=200 temp=199.8 pwm=0.723
Stats 1336.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1310211 bytes_read=517581 bytes_retransmit=9 bytes_invalid=0 send_seq=31283 receive_seq=31283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=44.0 mcu_temp: temp=37.7 sd_pos=303347 sysload=0.37 cputime=86.499 memavail=719344 print_time=1341.000 buffer_time=2.087 print_stall=0 extruder: target=200 temp=199.8 pwm=0.723
Stats 1337.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1312258 bytes_read=518070 bytes_retransmit=9 bytes_invalid=0 send_seq=31324 receive_seq=31324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=44.5 mcu_temp: temp=37.7 sd_pos=303679 sysload=0.37 cputime=86.570 memavail=718804 print_time=1341.993 buffer_time=2.080 print_stall=0 extruder: target=200 temp=199.6 pwm=0.723
Stats 1338.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1314888 bytes_read=518638 bytes_retransmit=9 bytes_invalid=0 send_seq=31376 receive_seq=31375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996631 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=44.4 mcu_temp: temp=37.9 sd_pos=304223 sysload=0.37 cputime=86.639 memavail=718856 print_time=1343.395 buffer_time=2.481 print_stall=0 extruder: target=200 temp=199.6 pwm=0.736
Stats 1339.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1317047 bytes_read=519161 bytes_retransmit=9 bytes_invalid=0 send_seq=31420 receive_seq=31420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.6 mcu_temp: temp=37.8 sd_pos=304515 sysload=0.37 cputime=86.704 memavail=718864 print_time=1344.528 buffer_time=2.613 print_stall=0 extruder: target=200 temp=199.8 pwm=0.666
Stats 1340.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1318157 bytes_read=519575 bytes_retransmit=9 bytes_invalid=0 send_seq=31446 receive_seq=31446 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.9 mcu_temp: temp=38.0 sd_pos=304644 sysload=0.37 cputime=86.764 memavail=718864 print_time=1345.307 buffer_time=2.391 print_stall=0 extruder: target=200 temp=199.8 pwm=0.666
Stats 1341.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1319859 bytes_read=520078 bytes_retransmit=9 bytes_invalid=0 send_seq=31481 receive_seq=31481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=305029 sysload=0.34 cputime=86.836 memavail=718864 print_time=1346.440 buffer_time=2.523 print_stall=0 extruder: target=200 temp=199.8 pwm=0.666
Stats 1342.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1321598 bytes_read=520561 bytes_retransmit=9 bytes_invalid=0 send_seq=31518 receive_seq=31518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.7 mcu_temp: temp=38.0 sd_pos=305645 sysload=0.34 cputime=86.903 memavail=719864 print_time=1347.259 buffer_time=2.340 print_stall=0 extruder: target=200 temp=199.9 pwm=0.666
Stats 1343.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1322616 bytes_read=520970 bytes_retransmit=9 bytes_invalid=0 send_seq=31543 receive_seq=31543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=44.9 mcu_temp: temp=38.0 sd_pos=305735 sysload=0.34 cputime=86.963 memavail=720132 print_time=1347.937 buffer_time=2.016 print_stall=0 extruder: target=200 temp=200.0 pwm=0.627
Stats 1344.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1324261 bytes_read=521458 bytes_retransmit=9 bytes_invalid=0 send_seq=31578 receive_seq=31578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.3 mcu_temp: temp=38.1 sd_pos=306195 sysload=0.34 cputime=87.030 memavail=720332 print_time=1348.969 buffer_time=2.047 print_stall=0 extruder: target=200 temp=200.1 pwm=0.627
Stats 1345.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1326534 bytes_read=521976 bytes_retransmit=9 bytes_invalid=0 send_seq=31622 receive_seq=31622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.1 mcu_temp: temp=37.9 sd_pos=306706 sysload=0.34 cputime=87.100 memavail=720388 print_time=1350.405 buffer_time=2.479 print_stall=0 extruder: target=200 temp=200.2 pwm=0.627
Stats 1346.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1327716 bytes_read=522405 bytes_retransmit=9 bytes_invalid=0 send_seq=31648 receive_seq=31648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=306874 sysload=0.31 cputime=87.163 memavail=720516 print_time=1351.261 buffer_time=2.335 print_stall=0 extruder: target=200 temp=200.2 pwm=0.627
Stats 1347.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1329506 bytes_read=522903 bytes_retransmit=9 bytes_invalid=0 send_seq=31685 receive_seq=31685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=44.0 mcu_temp: temp=38.0 sd_pos=307356 sysload=0.31 cputime=87.234 memavail=720516 print_time=1352.197 buffer_time=2.267 print_stall=0 extruder: target=200 temp=200.3 pwm=0.593
Stats 1348.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1330518 bytes_read=523326 bytes_retransmit=9 bytes_invalid=0 send_seq=31710 receive_seq=31710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996631 heater_bed: target=60 temp=60.0 pwm=0.434 raspberry_pi: temp=44.2 mcu_temp: temp=38.0 sd_pos=307464 sysload=0.31 cputime=87.298 memavail=720536 print_time=1352.947 buffer_time=2.016 print_stall=0 extruder: target=200 temp=200.2 pwm=0.645
Stats 1349.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1331575 bytes_read=523730 bytes_retransmit=9 bytes_invalid=0 send_seq=31734 receive_seq=31734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=43.9 mcu_temp: temp=37.9 sd_pos=307727 sysload=0.31 cputime=87.360 memavail=720536 print_time=1354.434 buffer_time=2.502 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 1350.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1332676 bytes_read=524178 bytes_retransmit=9 bytes_invalid=0 send_seq=31761 receive_seq=31761 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=44.0 mcu_temp: temp=38.0 sd_pos=307919 sysload=0.31 cputime=87.430 memavail=720536 print_time=1355.526 buffer_time=2.594 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 1351.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1334152 bytes_read=524656 bytes_retransmit=9 bytes_invalid=0 send_seq=31794 receive_seq=31794 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.2 mcu_temp: temp=38.0 sd_pos=308107 sysload=0.29 cputime=87.494 memavail=720536 print_time=1357.299 buffer_time=3.366 print_stall=0 extruder: target=200 temp=200.0 pwm=0.729
Stats 1352.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1334325 bytes_read=524994 bytes_retransmit=9 bytes_invalid=0 send_seq=31806 receive_seq=31806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.5 mcu_temp: temp=38.1 sd_pos=308107 sysload=0.29 cputime=87.550 memavail=720792 print_time=1357.299 buffer_time=2.364 print_stall=0 extruder: target=200 temp=200.0 pwm=0.729
Stats 1353.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1336837 bytes_read=525541 bytes_retransmit=9 bytes_invalid=0 send_seq=31855 receive_seq=31855 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996635 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=308526 sysload=0.29 cputime=87.618 memavail=720548 print_time=1358.560 buffer_time=2.624 print_stall=0 extruder: target=200 temp=199.9 pwm=0.729
Stats 1354.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1338101 bytes_read=525984 bytes_retransmit=9 bytes_invalid=0 send_seq=31884 receive_seq=31884 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.297 raspberry_pi: temp=43.4 mcu_temp: temp=38.1 sd_pos=308891 sysload=0.29 cputime=87.684 memavail=720548 print_time=1359.117 buffer_time=2.176 print_stall=0 extruder: target=200 temp=199.8 pwm=0.729
Stats 1355.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1340050 bytes_read=526468 bytes_retransmit=9 bytes_invalid=0 send_seq=31924 receive_seq=31924 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996636 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.2 mcu_temp: temp=37.9 sd_pos=309257 sysload=0.29 cputime=87.749 memavail=720324 print_time=1360.069 buffer_time=2.127 print_stall=0 extruder: target=200 temp=199.8 pwm=0.729
Stats 1356.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1342250 bytes_read=527016 bytes_retransmit=9 bytes_invalid=0 send_seq=31968 receive_seq=31968 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.3 mcu_temp: temp=38.0 sd_pos=309628 sysload=0.27 cputime=87.818 memavail=720324 print_time=1361.161 buffer_time=2.218 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1357.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1344636 bytes_read=527539 bytes_retransmit=9 bytes_invalid=0 send_seq=32014 receive_seq=32013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996647 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.3 mcu_temp: temp=38.1 sd_pos=310132 sysload=0.27 cputime=87.889 memavail=720324 print_time=1362.488 buffer_time=2.544 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1358.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1345870 bytes_read=527968 bytes_retransmit=9 bytes_invalid=0 send_seq=32042 receive_seq=32042 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996643 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 sd_pos=310334 sysload=0.27 cputime=87.950 memavail=720332 print_time=1363.029 buffer_time=2.084 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1359.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1347708 bytes_read=528466 bytes_retransmit=9 bytes_invalid=0 send_seq=32079 receive_seq=32079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996644 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 sd_pos=310621 sysload=0.27 cputime=88.018 memavail=720112 print_time=1364.162 buffer_time=2.215 print_stall=0 extruder: target=200 temp=199.8 pwm=0.706
Stats 1360.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1350045 bytes_read=528989 bytes_retransmit=9 bytes_invalid=0 send_seq=32124 receive_seq=32124 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=167996646 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.3 mcu_temp: temp=37.8 sd_pos=311067 sysload=0.27 cputime=88.087 memavail=719864 print_time=1365.766 buffer_time=2.819 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 1361.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1351808 bytes_read=529468 bytes_retransmit=9 bytes_invalid=0 send_seq=32160 receive_seq=32160 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996647 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.7 mcu_temp: temp=38.0 sd_pos=311682 sysload=0.24 cputime=88.156 memavail=719864 print_time=1366.584 buffer_time=2.636 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 1362.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1352802 bytes_read=529915 bytes_retransmit=9 bytes_invalid=0 send_seq=32184 receive_seq=32184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996644 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.0 mcu_temp: temp=38.0 sd_pos=311772 sysload=0.24 cputime=88.220 memavail=719612 print_time=1367.264 buffer_time=2.314 print_stall=0 extruder: target=200 temp=200.2 pwm=0.618
Stats 1363.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1353992 bytes_read=530329 bytes_retransmit=9 bytes_invalid=0 send_seq=32210 receive_seq=32210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996650 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=312067 sysload=0.24 cputime=88.283 memavail=719372 print_time=1368.116 buffer_time=2.165 print_stall=0 extruder: target=200 temp=200.3 pwm=0.618
Stats 1364.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1355862 bytes_read=530803 bytes_retransmit=9 bytes_invalid=0 send_seq=32248 receive_seq=32248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996647 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.8 mcu_temp: temp=38.2 sd_pos=312618 sysload=0.24 cputime=88.351 memavail=719124 print_time=1369.010 buffer_time=2.057 print_stall=0 extruder: target=200 temp=200.3 pwm=0.618
Stats 1365.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1357867 bytes_read=531340 bytes_retransmit=9 bytes_invalid=0 send_seq=32290 receive_seq=32290 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996650 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=312907 sysload=0.24 cputime=88.419 memavail=719124 print_time=1370.587 buffer_time=2.632 print_stall=0 extruder: target=200 temp=200.3 pwm=0.605
Stats 1366.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1359636 bytes_read=531824 bytes_retransmit=9 bytes_invalid=0 send_seq=32327 receive_seq=32327 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996645 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=43.6 mcu_temp: temp=37.9 sd_pos=313393 sysload=0.22 cputime=88.485 memavail=719124 print_time=1371.513 buffer_time=2.557 print_stall=0 extruder: target=200 temp=200.3 pwm=0.605
Stats 1367.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1360716 bytes_read=532238 bytes_retransmit=9 bytes_invalid=0 send_seq=32353 receive_seq=32353 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.445 raspberry_pi: temp=43.4 mcu_temp: temp=37.9 sd_pos=313501 sysload=0.22 cputime=88.545 memavail=719128 print_time=1372.265 buffer_time=2.307 print_stall=0 extruder: target=200 temp=200.3 pwm=0.656
Stats 1368.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1361789 bytes_read=532695 bytes_retransmit=9 bytes_invalid=0 send_seq=32379 receive_seq=32379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=43.4 mcu_temp: temp=38.1 sd_pos=313732 sysload=0.22 cputime=88.611 memavail=719136 print_time=1373.745 buffer_time=2.786 print_stall=0 extruder: target=200 temp=200.2 pwm=0.713
Stats 1369.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1362866 bytes_read=533109 bytes_retransmit=9 bytes_invalid=0 send_seq=32405 receive_seq=32405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=43.8 mcu_temp: temp=37.9 sd_pos=313927 sysload=0.22 cputime=88.674 memavail=719136 print_time=1374.836 buffer_time=2.876 print_stall=0 extruder: target=200 temp=200.1 pwm=0.713
Stats 1370.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1364223 bytes_read=533558 bytes_retransmit=9 bytes_invalid=0 send_seq=32435 receive_seq=32435 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=43.6 mcu_temp: temp=38.0 sd_pos=314115 sysload=0.22 cputime=88.738 memavail=719136 print_time=1376.611 buffer_time=3.649 print_stall=0 extruder: target=200 temp=200.0 pwm=0.713
Stats 1371.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1364429 bytes_read=533940 bytes_retransmit=9 bytes_invalid=0 send_seq=32446 receive_seq=32446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=314115 sysload=0.21 cputime=88.796 memavail=719136 print_time=1376.611 buffer_time=2.648 print_stall=0 extruder: target=200 temp=199.9 pwm=0.713
Stats 1372.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1365605 bytes_read=534364 bytes_retransmit=9 bytes_invalid=0 send_seq=32474 receive_seq=32474 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 sd_pos=314435 sysload=0.21 cputime=88.859 memavail=719136 print_time=1377.131 buffer_time=2.167 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 1373.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1368135 bytes_read=534908 bytes_retransmit=9 bytes_invalid=0 send_seq=32524 receive_seq=32523 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.7 mcu_temp: temp=37.9 sd_pos=314934 sysload=0.21 cputime=88.929 memavail=719136 print_time=1378.374 buffer_time=2.408 print_stall=0 extruder: target=200 temp=200.0 pwm=0.689
Stats 1374.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1369891 bytes_read=535400 bytes_retransmit=9 bytes_invalid=0 send_seq=32560 receive_seq=32559 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=315264 sysload=0.21 cputime=88.995 memavail=719148 print_time=1379.294 buffer_time=2.327 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 1375.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1371919 bytes_read=535900 bytes_retransmit=9 bytes_invalid=0 send_seq=32600 receive_seq=32600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.4 mcu_temp: temp=38.0 sd_pos=315672 sysload=0.21 cputime=89.061 memavail=719148 print_time=1380.354 buffer_time=2.386 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 1376.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1374432 bytes_read=536454 bytes_retransmit=9 bytes_invalid=0 send_seq=32649 receive_seq=32648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.9 mcu_temp: temp=38.1 sd_pos=316211 sysload=0.19 cputime=89.133 memavail=719148 print_time=1381.701 buffer_time=2.728 print_stall=0 extruder: target=200 temp=200.0 pwm=0.638
Stats 1377.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1375791 bytes_read=536923 bytes_retransmit=9 bytes_invalid=0 send_seq=32680 receive_seq=32680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996638 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=43.9 mcu_temp: temp=38.1 sd_pos=316413 sysload=0.19 cputime=89.197 memavail=719148 print_time=1382.239 buffer_time=2.266 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 1378.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1377345 bytes_read=537362 bytes_retransmit=9 bytes_invalid=0 send_seq=32713 receive_seq=32713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.442 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=316611 sysload=0.19 cputime=89.265 memavail=719156 print_time=1383.071 buffer_time=2.097 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 1379.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1379971 bytes_read=537921 bytes_retransmit=9 bytes_invalid=0 send_seq=32766 receive_seq=32766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.2 mcu_temp: temp=38.0 sd_pos=317090 sysload=0.19 cputime=89.340 memavail=719156 print_time=1384.888 buffer_time=2.914 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 1380.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1380729 bytes_read=538333 bytes_retransmit=9 bytes_invalid=0 send_seq=32786 receive_seq=32786 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=317285 sysload=0.19 cputime=89.400 memavail=719156 print_time=1385.097 buffer_time=2.122 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 1381.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1383028 bytes_read=538853 bytes_retransmit=9 bytes_invalid=0 send_seq=32830 receive_seq=32830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.6 mcu_temp: temp=38.0 sd_pos=317834 sysload=0.17 cputime=89.471 memavail=719156 print_time=1386.474 buffer_time=2.498 print_stall=0 extruder: target=200 temp=200.1 pwm=0.596
Stats 1382.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1384152 bytes_read=539282 bytes_retransmit=9 bytes_invalid=0 send_seq=32856 receive_seq=32856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=318098 sysload=0.17 cputime=89.533 memavail=719156 print_time=1387.302 buffer_time=2.326 print_stall=0 extruder: target=200 temp=200.1 pwm=0.596
Stats 1383.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1386087 bytes_read=539789 bytes_retransmit=9 bytes_invalid=0 send_seq=32895 receive_seq=32895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=318719 sysload=0.17 cputime=89.602 memavail=718912 print_time=1388.227 buffer_time=2.248 print_stall=0 extruder: target=200 temp=200.1 pwm=0.596
Stats 1384.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1388094 bytes_read=540278 bytes_retransmit=9 bytes_invalid=0 send_seq=32936 receive_seq=32936 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=43.9 mcu_temp: temp=37.9 sd_pos=318980 sysload=0.17 cputime=89.668 memavail=719036 print_time=1389.797 buffer_time=2.817 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 1385.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=1388694 bytes_read=540667 bytes_retransmit=9 bytes_invalid=0 send_seq=32954 receive_seq=32954 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.353 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=319174 sysload=0.17 cputime=89.728 memavail=719036 print_time=1390.009 buffer_time=2.029 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 1386.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1390915 bytes_read=541214 bytes_retransmit=9 bytes_invalid=0 send_seq=32998 receive_seq=32998 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996635 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=319645 sysload=0.16 cputime=89.798 memavail=719044 print_time=1391.490 buffer_time=2.508 print_stall=0 extruder: target=200 temp=200.0 pwm=0.655
Stats 1387.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1392015 bytes_read=541633 bytes_retransmit=9 bytes_invalid=0 send_seq=33025 receive_seq=33025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996631 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=43.7 mcu_temp: temp=38.0 sd_pos=319877 sysload=0.16 cputime=89.860 memavail=718792 print_time=1392.975 buffer_time=2.991 print_stall=0 extruder: target=200 temp=199.9 pwm=0.737
Stats 1388.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1393094 bytes_read=542067 bytes_retransmit=9 bytes_invalid=0 send_seq=33052 receive_seq=33052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=43.4 mcu_temp: temp=37.9 sd_pos=320069 sysload=0.16 cputime=89.924 memavail=718540 print_time=1394.056 buffer_time=3.070 print_stall=0 extruder: target=200 temp=199.9 pwm=0.737
Stats 1389.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1393274 bytes_read=542434 bytes_retransmit=9 bytes_invalid=0 send_seq=33063 receive_seq=33063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=43.7 mcu_temp: temp=38.0 sd_pos=320069 sysload=0.16 cputime=89.981 memavail=718548 print_time=1394.056 buffer_time=2.069 print_stall=0 extruder: target=200 temp=199.8 pwm=0.737
Stats 1390.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1394679 bytes_read=542868 bytes_retransmit=9 bytes_invalid=0 send_seq=33093 receive_seq=33093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 sd_pos=320260 sysload=0.16 cputime=90.044 memavail=718548 print_time=1395.833 buffer_time=2.844 print_stall=0 extruder: target=200 temp=199.8 pwm=0.737
Stats 1391.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1395866 bytes_read=543322 bytes_retransmit=9 bytes_invalid=0 send_seq=33121 receive_seq=33121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=320581 sysload=0.15 cputime=90.107 memavail=718552 print_time=1396.349 buffer_time=2.359 print_stall=0 extruder: target=200 temp=199.8 pwm=0.737
Stats 1392.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1398194 bytes_read=543864 bytes_retransmit=9 bytes_invalid=0 send_seq=33167 receive_seq=33167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.0 mcu_temp: temp=38.0 sd_pos=321052 sysload=0.15 cputime=90.174 memavail=718552 print_time=1397.530 buffer_time=2.537 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 1393.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1399947 bytes_read=544323 bytes_retransmit=9 bytes_invalid=0 send_seq=33202 receive_seq=33202 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=321415 sysload=0.15 cputime=90.239 memavail=718300 print_time=1398.458 buffer_time=2.463 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 1394.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1401901 bytes_read=544822 bytes_retransmit=9 bytes_invalid=0 send_seq=33242 receive_seq=33242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=321821 sysload=0.15 cputime=90.306 memavail=718068 print_time=1399.491 buffer_time=2.495 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 1395.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1404152 bytes_read=545374 bytes_retransmit=9 bytes_invalid=0 send_seq=33288 receive_seq=33287 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=322286 sysload=0.15 cputime=90.379 memavail=718068 print_time=1400.595 buffer_time=2.594 print_stall=0 extruder: target=200 temp=200.0 pwm=0.645
Stats 1396.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1405152 bytes_read=545778 bytes_retransmit=9 bytes_invalid=0 send_seq=33311 receive_seq=33311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=43.7 mcu_temp: temp=38.0 sd_pos=322441 sysload=0.21 cputime=90.439 memavail=718068 print_time=1401.068 buffer_time=2.067 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 1397.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1407621 bytes_read=546317 bytes_retransmit=9 bytes_invalid=0 send_seq=33359 receive_seq=33359 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.439 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=322713 sysload=0.21 cputime=90.504 memavail=718048 print_time=1402.441 buffer_time=2.440 print_stall=0 extruder: target=200 temp=200.0 pwm=0.645
Stats 1398.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1409751 bytes_read=546839 bytes_retransmit=9 bytes_invalid=0 send_seq=33401 receive_seq=33401 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=43.6 mcu_temp: temp=38.0 sd_pos=323129 sysload=0.21 cputime=90.571 memavail=717884 print_time=1403.978 buffer_time=2.974 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 1399.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1410480 bytes_read=547228 bytes_retransmit=9 bytes_invalid=0 send_seq=33422 receive_seq=33422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.462 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=323290 sysload=0.21 cputime=90.631 memavail=718316 print_time=1404.165 buffer_time=2.160 print_stall=0 extruder: target=200 temp=200.1 pwm=0.628
Stats 1400.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1412769 bytes_read=547768 bytes_retransmit=9 bytes_invalid=0 send_seq=33468 receive_seq=33467 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=43.8 mcu_temp: temp=38.0 sd_pos=323838 sysload=0.21 cputime=90.703 memavail=718388 print_time=1405.540 buffer_time=2.534 print_stall=0 extruder: target=200 temp=200.2 pwm=0.628
Stats 1401.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1413900 bytes_read=548210 bytes_retransmit=9 bytes_invalid=0 send_seq=33494 receive_seq=33493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=324101 sysload=0.28 cputime=90.764 memavail=718096 print_time=1406.370 buffer_time=2.361 print_stall=0 extruder: target=200 temp=200.2 pwm=0.628
Stats 1402.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1415801 bytes_read=548684 bytes_retransmit=9 bytes_invalid=0 send_seq=33532 receive_seq=33531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=324685 sysload=0.28 cputime=90.830 memavail=718160 print_time=1407.285 buffer_time=2.274 print_stall=0 extruder: target=200 temp=200.2 pwm=0.628
Stats 1403.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1417576 bytes_read=549125 bytes_retransmit=9 bytes_invalid=0 send_seq=33570 receive_seq=33558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=254 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=324976 sysload=0.28 cputime=90.898 memavail=718368 print_time=1408.864 buffer_time=2.847 print_stall=0 extruder: target=200 temp=200.2 pwm=0.628
Stats 1404.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1418535 bytes_read=549587 bytes_retransmit=9 bytes_invalid=0 send_seq=33594 receive_seq=33593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.6 mcu_temp: temp=38.1 sd_pos=325171 sysload=0.28 cputime=90.960 memavail=718448 print_time=1409.075 buffer_time=2.057 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1405.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1420606 bytes_read=550096 bytes_retransmit=9 bytes_invalid=0 send_seq=33635 receive_seq=33635 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=325576 sysload=0.28 cputime=91.025 memavail=718612 print_time=1410.548 buffer_time=2.530 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1406.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1421695 bytes_read=550544 bytes_retransmit=9 bytes_invalid=0 send_seq=33662 receive_seq=33662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.330 raspberry_pi: temp=44.2 mcu_temp: temp=38.1 sd_pos=325777 sysload=0.34 cputime=91.088 memavail=718716 print_time=1412.022 buffer_time=3.004 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1407.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1421873 bytes_read=550907 bytes_retransmit=9 bytes_invalid=0 send_seq=33675 receive_seq=33675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=325777 sysload=0.34 cputime=91.145 memavail=718704 print_time=1412.022 buffer_time=2.004 print_stall=0 extruder: target=200 temp=200.0 pwm=0.699
Stats 1408.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1422956 bytes_read=551321 bytes_retransmit=9 bytes_invalid=0 send_seq=33701 receive_seq=33701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.9 mcu_temp: temp=38.2 sd_pos=326032 sysload=0.34 cputime=91.208 memavail=719032 print_time=1413.122 buffer_time=2.103 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 1409.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1424382 bytes_read=551789 bytes_retransmit=9 bytes_invalid=0 send_seq=33732 receive_seq=33732 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.449 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=326188 sysload=0.34 cputime=91.274 memavail=718760 print_time=1414.886 buffer_time=2.867 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 1410.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1425441 bytes_read=552232 bytes_retransmit=9 bytes_invalid=0 send_seq=33758 receive_seq=33758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=326477 sysload=0.34 cputime=91.337 memavail=718776 print_time=1415.364 buffer_time=2.342 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 1411.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1426710 bytes_read=552661 bytes_retransmit=9 bytes_invalid=0 send_seq=33787 receive_seq=33787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=43.8 mcu_temp: temp=37.9 sd_pos=326557 sysload=0.39 cputime=91.398 memavail=718468 print_time=1416.018 buffer_time=1.996 print_stall=0 extruder: target=200 temp=199.8 pwm=0.707
Stats 1412.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1429486 bytes_read=553234 bytes_retransmit=9 bytes_invalid=0 send_seq=33840 receive_seq=33839 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=327304 sysload=0.39 cputime=91.471 memavail=718680 print_time=1417.473 buffer_time=2.450 print_stall=0 extruder: target=200 temp=199.8 pwm=0.707
Stats 1413.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1431342 bytes_read=553722 bytes_retransmit=9 bytes_invalid=0 send_seq=33877 receive_seq=33877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.3 mcu_temp: temp=38.1 sd_pos=327711 sysload=0.39 cputime=91.538 memavail=719064 print_time=1418.487 buffer_time=2.462 print_stall=0 extruder: target=200 temp=199.8 pwm=0.707
Stats 1414.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1433870 bytes_read=554236 bytes_retransmit=9 bytes_invalid=0 send_seq=33925 receive_seq=33923 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.6 mcu_temp: temp=38.1 sd_pos=328213 sysload=0.39 cputime=91.610 memavail=718572 print_time=1419.799 buffer_time=2.771 print_stall=0 extruder: target=200 temp=199.8 pwm=0.707
Stats 1415.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1434832 bytes_read=554701 bytes_retransmit=9 bytes_invalid=0 send_seq=33950 receive_seq=33950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=44.8 mcu_temp: temp=38.1 sd_pos=328356 sysload=0.39 cputime=91.672 memavail=718584 print_time=1420.253 buffer_time=2.224 print_stall=0 extruder: target=200 temp=199.8 pwm=0.690
Stats 1416.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1436255 bytes_read=555149 bytes_retransmit=9 bytes_invalid=0 send_seq=33981 receive_seq=33980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=44.9 mcu_temp: temp=38.1 sd_pos=328516 sysload=0.44 cputime=91.734 memavail=718584 print_time=1421.046 buffer_time=2.016 print_stall=0 extruder: target=200 temp=199.9 pwm=0.653
Stats 1417.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1439173 bytes_read=555708 bytes_retransmit=9 bytes_invalid=0 send_seq=34036 receive_seq=34035 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=44.9 mcu_temp: temp=38.2 sd_pos=329037 sysload=0.44 cputime=91.805 memavail=718344 print_time=1422.950 buffer_time=2.919 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 1418.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1439953 bytes_read=556126 bytes_retransmit=9 bytes_invalid=0 send_seq=34057 receive_seq=34056 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.7 mcu_temp: temp=38.2 sd_pos=329230 sysload=0.44 cputime=91.867 memavail=718344 print_time=1423.163 buffer_time=2.130 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 1419.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1442184 bytes_read=556649 bytes_retransmit=9 bytes_invalid=0 send_seq=34101 receive_seq=34101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.5 mcu_temp: temp=38.1 sd_pos=329775 sysload=0.44 cputime=91.934 memavail=717868 print_time=1424.533 buffer_time=2.499 print_stall=0 extruder: target=200 temp=200.1 pwm=0.602
Stats 1420.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1443314 bytes_read=557058 bytes_retransmit=9 bytes_invalid=0 send_seq=34127 receive_seq=34126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.460 raspberry_pi: temp=44.7 mcu_temp: temp=38.1 sd_pos=330008 sysload=0.44 cputime=91.996 memavail=717628 print_time=1425.361 buffer_time=2.325 print_stall=0 extruder: target=200 temp=200.2 pwm=0.602
Stats 1421.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1445207 bytes_read=557576 bytes_retransmit=9 bytes_invalid=0 send_seq=34165 receive_seq=34164 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.4 mcu_temp: temp=38.1 sd_pos=330626 sysload=0.40 cputime=92.063 memavail=717608 print_time=1426.274 buffer_time=2.238 print_stall=0 extruder: target=200 temp=200.2 pwm=0.602
Stats 1422.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1447214 bytes_read=558084 bytes_retransmit=9 bytes_invalid=0 send_seq=34206 receive_seq=34206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.0 mcu_temp: temp=38.0 sd_pos=330914 sysload=0.40 cputime=92.128 memavail=717920 print_time=1427.847 buffer_time=2.809 print_stall=0 extruder: target=200 temp=200.2 pwm=0.602
Stats 1423.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1447896 bytes_read=558463 bytes_retransmit=9 bytes_invalid=0 send_seq=34225 receive_seq=34225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=44.4 mcu_temp: temp=37.9 sd_pos=331107 sysload=0.40 cputime=92.189 memavail=717920 print_time=1428.066 buffer_time=2.026 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 1424.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1450049 bytes_read=558991 bytes_retransmit=9 bytes_invalid=0 send_seq=34268 receive_seq=34268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.0 mcu_temp: temp=38.0 sd_pos=331542 sysload=0.40 cputime=92.257 memavail=717680 print_time=1429.540 buffer_time=2.498 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 1425.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1451076 bytes_read=559424 bytes_retransmit=9 bytes_invalid=0 send_seq=34292 receive_seq=34292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.3 mcu_temp: temp=38.0 sd_pos=331741 sysload=0.40 cputime=92.319 memavail=717752 print_time=1431.024 buffer_time=2.979 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 1426.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1451412 bytes_read=559773 bytes_retransmit=9 bytes_invalid=0 send_seq=34305 receive_seq=34305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.5 mcu_temp: temp=38.1 sd_pos=331804 sysload=0.37 cputime=92.376 memavail=718180 print_time=1431.137 buffer_time=2.091 print_stall=0 extruder: target=200 temp=199.9 pwm=0.731
Stats 1427.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1452338 bytes_read=560201 bytes_retransmit=9 bytes_invalid=0 send_seq=34329 receive_seq=34328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=332000 sysload=0.37 cputime=92.438 memavail=718280 print_time=1432.114 buffer_time=2.067 print_stall=0 extruder: target=200 temp=199.8 pwm=0.731
Stats 1428.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1453749 bytes_read=560649 bytes_retransmit=9 bytes_invalid=0 send_seq=34359 receive_seq=34358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=332158 sysload=0.37 cputime=92.501 memavail=718280 print_time=1433.879 buffer_time=2.831 print_stall=0 extruder: target=200 temp=199.8 pwm=0.731
Stats 1429.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1454805 bytes_read=561054 bytes_retransmit=9 bytes_invalid=0 send_seq=34385 receive_seq=34384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=43.7 mcu_temp: temp=38.1 sd_pos=332478 sysload=0.37 cputime=92.563 memavail=718284 print_time=1434.357 buffer_time=2.307 print_stall=0 extruder: target=200 temp=199.8 pwm=0.731
Stats 1430.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1457219 bytes_read=561639 bytes_retransmit=9 bytes_invalid=0 send_seq=34434 receive_seq=34434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.474 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=332949 sysload=0.37 cputime=92.637 memavail=718292 print_time=1435.536 buffer_time=2.482 print_stall=0 extruder: target=200 temp=199.8 pwm=0.716
Stats 1431.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1458908 bytes_read=562093 bytes_retransmit=9 bytes_invalid=0 send_seq=34468 receive_seq=34468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=43.7 mcu_temp: temp=38.1 sd_pos=333313 sysload=0.58 cputime=92.704 memavail=718080 print_time=1436.438 buffer_time=2.383 print_stall=0 extruder: target=200 temp=199.9 pwm=0.716
Stats 1432.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1460802 bytes_read=562572 bytes_retransmit=9 bytes_invalid=0 send_seq=34507 receive_seq=34507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=333725 sysload=0.58 cputime=92.771 memavail=717828 print_time=1437.437 buffer_time=2.381 print_stall=0 extruder: target=200 temp=199.9 pwm=0.716
Stats 1433.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1463137 bytes_read=563145 bytes_retransmit=9 bytes_invalid=0 send_seq=34554 receive_seq=34554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=43.8 mcu_temp: temp=38.2 sd_pos=334228 sysload=0.58 cputime=92.842 memavail=718104 print_time=1438.747 buffer_time=2.691 print_stall=0 extruder: target=200 temp=199.9 pwm=0.716
Stats 1434.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1464089 bytes_read=563554 bytes_retransmit=9 bytes_invalid=0 send_seq=34579 receive_seq=34579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.6 mcu_temp: temp=38.2 sd_pos=334360 sysload=0.58 cputime=92.909 memavail=718388 print_time=1439.208 buffer_time=2.151 print_stall=0 extruder: target=200 temp=200.0 pwm=0.616
Stats 1435.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1466323 bytes_read=564078 bytes_retransmit=9 bytes_invalid=0 send_seq=34624 receive_seq=34624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996681 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=334623 sysload=0.58 cputime=92.975 memavail=718908 print_time=1440.351 buffer_time=2.295 print_stall=0 extruder: target=200 temp=200.0 pwm=0.631
Stats 1436.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1468398 bytes_read=564605 bytes_retransmit=9 bytes_invalid=0 send_seq=34665 receive_seq=34664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996683 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.8 mcu_temp: temp=38.3 sd_pos=335006 sysload=0.53 cputime=93.043 memavail=719164 print_time=1441.887 buffer_time=2.828 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 1437.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1469125 bytes_read=564984 bytes_retransmit=9 bytes_invalid=0 send_seq=34684 receive_seq=34683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996682 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 sd_pos=335232 sysload=0.53 cputime=93.104 memavail=719444 print_time=1442.098 buffer_time=2.038 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 1438.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1471325 bytes_read=565503 bytes_retransmit=9 bytes_invalid=0 send_seq=34727 receive_seq=34727 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996681 heater_bed: target=60 temp=60.0 pwm=0.334 raspberry_pi: temp=43.7 mcu_temp: temp=38.3 sd_pos=335784 sysload=0.53 cputime=93.174 memavail=719692 print_time=1443.464 buffer_time=2.402 print_stall=0 extruder: target=200 temp=200.2 pwm=0.631
Stats 1439.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1472513 bytes_read=565945 bytes_retransmit=9 bytes_invalid=0 send_seq=34754 receive_seq=34753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996675 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.6 mcu_temp: temp=38.2 sd_pos=336015 sysload=0.53 cputime=93.237 memavail=719644 print_time=1444.299 buffer_time=2.236 print_stall=0 extruder: target=200 temp=200.2 pwm=0.631
Stats 1440.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1474399 bytes_read=566419 bytes_retransmit=9 bytes_invalid=0 send_seq=34792 receive_seq=34791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996666 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.6 mcu_temp: temp=38.2 sd_pos=336633 sysload=0.53 cputime=93.308 memavail=720208 print_time=1445.209 buffer_time=2.143 print_stall=0 extruder: target=200 temp=200.3 pwm=0.631
Stats 1441.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1476427 bytes_read=566938 bytes_retransmit=9 bytes_invalid=0 send_seq=34832 receive_seq=34832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996659 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.8 mcu_temp: temp=38.2 sd_pos=336927 sysload=0.49 cputime=93.374 memavail=720208 print_time=1446.786 buffer_time=2.720 print_stall=0 extruder: target=200 temp=200.2 pwm=0.631
Stats 1442.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1478240 bytes_read=567425 bytes_retransmit=9 bytes_invalid=0 send_seq=34868 receive_seq=34867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996663 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.3 mcu_temp: temp=38.2 sd_pos=337444 sysload=0.49 cputime=93.444 memavail=720660 print_time=1447.717 buffer_time=2.648 print_stall=0 extruder: target=200 temp=200.2 pwm=0.631
Stats 1443.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1479224 bytes_read=567829 bytes_retransmit=9 bytes_invalid=0 send_seq=34891 receive_seq=34891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996664 heater_bed: target=60 temp=60.0 pwm=0.348 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=337556 sysload=0.49 cputime=93.506 memavail=720016 print_time=1448.476 buffer_time=2.407 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 1444.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1480356 bytes_read=568268 bytes_retransmit=9 bytes_invalid=0 send_seq=34919 receive_seq=34919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996658 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=337789 sysload=0.49 cputime=93.570 memavail=720316 print_time=1449.966 buffer_time=2.896 print_stall=0 extruder: target=200 temp=200.0 pwm=0.697
Stats 1445.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1480696 bytes_read=568660 bytes_retransmit=9 bytes_invalid=0 send_seq=34932 receive_seq=34932 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996652 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=43.7 mcu_temp: temp=38.1 sd_pos=337852 sysload=0.49 cputime=93.633 memavail=720316 print_time=1450.079 buffer_time=2.007 print_stall=0 extruder: target=200 temp=200.0 pwm=0.697
Stats 1446.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1482864 bytes_read=569159 bytes_retransmit=9 bytes_invalid=0 send_seq=34975 receive_seq=34975 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996646 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=43.7 mcu_temp: temp=37.9 sd_pos=338209 sysload=0.45 cputime=93.699 memavail=720316 print_time=1452.815 buffer_time=3.742 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 1447.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1483037 bytes_read=569513 bytes_retransmit=9 bytes_invalid=0 send_seq=34987 receive_seq=34986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=338209 sysload=0.45 cputime=93.757 memavail=720580 print_time=1452.815 buffer_time=2.741 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 1448.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1484095 bytes_read=569950 bytes_retransmit=9 bytes_invalid=0 send_seq=35012 receive_seq=35011 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.2 mcu_temp: temp=38.0 sd_pos=338529 sysload=0.45 cputime=93.820 memavail=720580 print_time=1453.295 buffer_time=2.219 print_stall=0 extruder: target=200 temp=199.8 pwm=0.717
Stats 1449.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1486447 bytes_read=570464 bytes_retransmit=9 bytes_invalid=0 send_seq=35057 receive_seq=35057 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=339035 sysload=0.45 cputime=93.889 memavail=721132 print_time=1454.483 buffer_time=2.405 print_stall=0 extruder: target=200 temp=199.8 pwm=0.717
Stats 1450.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1488461 bytes_read=570958 bytes_retransmit=9 bytes_invalid=0 send_seq=35097 receive_seq=35096 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996631 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=339471 sysload=0.45 cputime=93.957 memavail=720900 print_time=1455.642 buffer_time=2.563 print_stall=0 extruder: target=200 temp=199.7 pwm=0.717
Stats 1451.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1490432 bytes_read=571490 bytes_retransmit=9 bytes_invalid=0 send_seq=35137 receive_seq=35137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=339908 sysload=0.42 cputime=94.025 memavail=720752 print_time=1456.649 buffer_time=2.569 print_stall=0 extruder: target=200 temp=199.7 pwm=0.717
Stats 1452.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1492582 bytes_read=571974 bytes_retransmit=9 bytes_invalid=0 send_seq=35179 receive_seq=35177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=340394 sysload=0.42 cputime=94.096 memavail=720780 print_time=1457.706 buffer_time=2.621 print_stall=0 extruder: target=200 temp=199.7 pwm=0.717
Stats 1453.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1493942 bytes_read=572443 bytes_retransmit=9 bytes_invalid=0 send_seq=35211 receive_seq=35211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.463 raspberry_pi: temp=43.3 mcu_temp: temp=38.1 sd_pos=340528 sysload=0.42 cputime=94.160 memavail=720528 print_time=1458.440 buffer_time=2.355 print_stall=0 extruder: target=200 temp=199.7 pwm=0.702
Stats 1454.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1495381 bytes_read=572909 bytes_retransmit=9 bytes_invalid=0 send_seq=35243 receive_seq=35243 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.9 mcu_temp: temp=38.1 sd_pos=340847 sysload=0.42 cputime=94.227 memavail=721288 print_time=1459.496 buffer_time=2.410 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 1455.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1497359 bytes_read=573400 bytes_retransmit=9 bytes_invalid=0 send_seq=35283 receive_seq=35283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.9 mcu_temp: temp=38.1 sd_pos=341527 sysload=0.42 cputime=94.296 memavail=720824 print_time=1460.389 buffer_time=2.302 print_stall=0 extruder: target=200 temp=199.9 pwm=0.647
Stats 1456.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1499318 bytes_read=573894 bytes_retransmit=9 bytes_invalid=0 send_seq=35322 receive_seq=35322 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 sd_pos=341853 sysload=0.38 cputime=94.365 memavail=720828 print_time=1461.898 buffer_time=2.811 print_stall=0 extruder: target=200 temp=199.9 pwm=0.647
Stats 1457.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1500050 bytes_read=574301 bytes_retransmit=9 bytes_invalid=0 send_seq=35341 receive_seq=35341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=342080 sysload=0.38 cputime=94.428 memavail=720576 print_time=1462.122 buffer_time=2.031 print_stall=0 extruder: target=200 temp=200.0 pwm=0.647
Stats 1458.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1502235 bytes_read=574790 bytes_retransmit=9 bytes_invalid=0 send_seq=35383 receive_seq=35382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=342561 sysload=0.38 cputime=94.500 memavail=720580 print_time=1463.535 buffer_time=2.443 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 1459.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1503396 bytes_read=575229 bytes_retransmit=9 bytes_invalid=0 send_seq=35411 receive_seq=35410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=43.7 mcu_temp: temp=38.1 sd_pos=342761 sysload=0.38 cputime=94.571 memavail=720528 print_time=1464.381 buffer_time=2.287 print_stall=0 extruder: target=200 temp=200.1 pwm=0.636
Stats 1460.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1505256 bytes_read=575731 bytes_retransmit=9 bytes_invalid=0 send_seq=35449 receive_seq=35448 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.302 raspberry_pi: temp=43.7 mcu_temp: temp=38.1 sd_pos=343279 sysload=0.38 cputime=94.647 memavail=720588 print_time=1465.324 buffer_time=2.229 print_stall=0 extruder: target=200 temp=200.2 pwm=0.636
Stats 1461.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1507158 bytes_read=576225 bytes_retransmit=9 bytes_invalid=0 send_seq=35487 receive_seq=35487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996638 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=44.2 mcu_temp: temp=38.1 sd_pos=343585 sysload=0.35 cputime=94.724 memavail=720588 print_time=1467.571 buffer_time=3.475 print_stall=0 extruder: target=200 temp=200.1 pwm=0.636
Stats 1462.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1507299 bytes_read=576569 bytes_retransmit=9 bytes_invalid=0 send_seq=35497 receive_seq=35496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=43.7 mcu_temp: temp=38.1 sd_pos=343585 sysload=0.35 cputime=94.786 memavail=720336 print_time=1467.571 buffer_time=2.474 print_stall=0 extruder: target=200 temp=200.1 pwm=0.636
Stats 1463.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1508374 bytes_read=577001 bytes_retransmit=9 bytes_invalid=0 send_seq=35521 receive_seq=35520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996645 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=44.2 mcu_temp: temp=38.2 sd_pos=343875 sysload=0.35 cputime=94.857 memavail=720344 print_time=1468.659 buffer_time=2.560 print_stall=0 extruder: target=200 temp=200.1 pwm=0.670
Stats 1464.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1509811 bytes_read=577440 bytes_retransmit=9 bytes_invalid=0 send_seq=35552 receive_seq=35551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996640 heater_bed: target=60 temp=60.0 pwm=0.310 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 sd_pos=344035 sysload=0.35 cputime=94.927 memavail=720344 print_time=1470.417 buffer_time=3.317 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 1465.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1509968 bytes_read=577814 bytes_retransmit=9 bytes_invalid=0 send_seq=35563 receive_seq=35563 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=344035 sysload=0.35 cputime=94.995 memavail=720604 print_time=1470.417 buffer_time=2.316 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 1466.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1512080 bytes_read=578341 bytes_retransmit=9 bytes_invalid=0 send_seq=35606 receive_seq=35606 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=44.7 mcu_temp: temp=38.2 sd_pos=344442 sysload=0.32 cputime=95.071 memavail=720364 print_time=1471.526 buffer_time=2.424 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 1467.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1514003 bytes_read=578820 bytes_retransmit=9 bytes_invalid=0 send_seq=35645 receive_seq=35645 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.6 mcu_temp: temp=38.3 sd_pos=345112 sysload=0.32 cputime=95.152 memavail=720120 print_time=1472.347 buffer_time=2.243 print_stall=0 extruder: target=200 temp=199.9 pwm=0.730
Stats 1468.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1515693 bytes_read=579289 bytes_retransmit=9 bytes_invalid=0 send_seq=35680 receive_seq=35679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=44.1 mcu_temp: temp=38.2 sd_pos=345483 sysload=0.32 cputime=95.229 memavail=720372 print_time=1473.410 buffer_time=2.307 print_stall=0 extruder: target=200 temp=199.8 pwm=0.730
Stats 1469.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1517711 bytes_read=579811 bytes_retransmit=9 bytes_invalid=0 send_seq=35721 receive_seq=35721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=345921 sysload=0.32 cputime=95.308 memavail=720320 print_time=1474.430 buffer_time=2.325 print_stall=0 extruder: target=200 temp=199.8 pwm=0.730
Stats 1470.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1519044 bytes_read=580245 bytes_retransmit=9 bytes_invalid=0 send_seq=35752 receive_seq=35751 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=346155 sysload=0.32 cputime=95.384 memavail=720404 print_time=1475.219 buffer_time=2.112 print_stall=0 extruder: target=200 temp=199.8 pwm=0.730
Stats 1471.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1521643 bytes_read=580833 bytes_retransmit=9 bytes_invalid=0 send_seq=35803 receive_seq=35803 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.2 mcu_temp: temp=38.3 sd_pos=346576 sysload=0.30 cputime=95.464 memavail=720152 print_time=1477.037 buffer_time=2.929 print_stall=0 extruder: target=200 temp=199.8 pwm=0.716
Stats 1472.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1522438 bytes_read=581236 bytes_retransmit=9 bytes_invalid=0 send_seq=35825 receive_seq=35824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.2 mcu_temp: temp=38.2 sd_pos=346833 sysload=0.30 cputime=95.536 memavail=720420 print_time=1477.253 buffer_time=2.143 print_stall=0 extruder: target=200 temp=199.8 pwm=0.716
Stats 1473.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1524643 bytes_read=581740 bytes_retransmit=9 bytes_invalid=0 send_seq=35869 receive_seq=35868 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 sd_pos=347381 sysload=0.30 cputime=95.617 memavail=720420 print_time=1478.620 buffer_time=2.509 print_stall=0 extruder: target=200 temp=199.9 pwm=0.658
Stats 1474.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1525777 bytes_read=582188 bytes_retransmit=9 bytes_invalid=0 send_seq=35895 receive_seq=35895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.307 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=347612 sysload=0.30 cputime=95.693 memavail=719932 print_time=1479.441 buffer_time=2.329 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 1475.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1527763 bytes_read=582676 bytes_retransmit=9 bytes_invalid=0 send_seq=35934 receive_seq=35933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=44.6 mcu_temp: temp=38.3 sd_pos=348261 sysload=0.30 cputime=95.773 memavail=719432 print_time=1480.368 buffer_time=2.255 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 1476.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1529806 bytes_read=583190 bytes_retransmit=9 bytes_invalid=0 send_seq=35976 receive_seq=35976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=44.3 mcu_temp: temp=38.1 sd_pos=348553 sysload=0.27 cputime=95.852 memavail=718684 print_time=1481.934 buffer_time=2.820 print_stall=0 extruder: target=200 temp=200.2 pwm=0.593
Stats 1477.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1530496 bytes_read=583593 bytes_retransmit=9 bytes_invalid=0 send_seq=35995 receive_seq=35994 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=348747 sysload=0.27 cputime=95.923 memavail=718684 print_time=1482.167 buffer_time=2.050 print_stall=0 extruder: target=200 temp=200.2 pwm=0.593
Stats 1478.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1532628 bytes_read=584101 bytes_retransmit=9 bytes_invalid=0 send_seq=36037 receive_seq=36036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=349184 sysload=0.27 cputime=96.002 memavail=717676 print_time=1483.634 buffer_time=2.516 print_stall=0 extruder: target=200 temp=200.3 pwm=0.593
Stats 1479.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1533673 bytes_read=584510 bytes_retransmit=9 bytes_invalid=0 send_seq=36062 receive_seq=36061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=349385 sysload=0.27 cputime=96.077 memavail=717676 print_time=1485.130 buffer_time=3.010 print_stall=0 extruder: target=200 temp=200.3 pwm=0.593
Stats 1480.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1533830 bytes_read=584867 bytes_retransmit=9 bytes_invalid=0 send_seq=36073 receive_seq=36072 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=44.4 mcu_temp: temp=38.1 sd_pos=349385 sysload=0.27 cputime=96.145 memavail=717632 print_time=1485.130 buffer_time=2.009 print_stall=0 extruder: target=200 temp=200.2 pwm=0.659
Stats 1481.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1534890 bytes_read=585299 bytes_retransmit=9 bytes_invalid=0 send_seq=36097 receive_seq=36097 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=44.6 mcu_temp: temp=38.2 sd_pos=349641 sysload=0.25 cputime=96.219 memavail=717436 print_time=1486.213 buffer_time=2.089 print_stall=0 extruder: target=200 temp=200.1 pwm=0.659
Stats 1482.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1536342 bytes_read=585743 bytes_retransmit=9 bytes_invalid=0 send_seq=36130 receive_seq=36129 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.1 mcu_temp: temp=38.2 sd_pos=349802 sysload=0.25 cputime=96.292 memavail=716948 print_time=1487.962 buffer_time=2.835 print_stall=0 extruder: target=200 temp=200.0 pwm=0.731
Stats 1483.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1537362 bytes_read=586186 bytes_retransmit=9 bytes_invalid=0 send_seq=36156 receive_seq=36155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=350120 sysload=0.25 cputime=96.366 memavail=716960 print_time=1488.421 buffer_time=2.292 print_stall=0 extruder: target=200 temp=200.0 pwm=0.731
Stats 1484.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1539737 bytes_read=586719 bytes_retransmit=9 bytes_invalid=0 send_seq=36203 receive_seq=36202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.3 mcu_temp: temp=38.1 sd_pos=350657 sysload=0.25 cputime=96.443 memavail=716960 print_time=1489.611 buffer_time=2.479 print_stall=0 extruder: target=200 temp=199.9 pwm=0.690
Stats 1485.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1541258 bytes_read=587163 bytes_retransmit=9 bytes_invalid=0 send_seq=36235 receive_seq=36234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.6 mcu_temp: temp=38.2 sd_pos=351062 sysload=0.25 cputime=96.522 memavail=717500 print_time=1490.466 buffer_time=2.332 print_stall=0 extruder: target=200 temp=199.9 pwm=0.690
Stats 1486.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1543028 bytes_read=587676 bytes_retransmit=9 bytes_invalid=0 send_seq=36272 receive_seq=36271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=45.1 mcu_temp: temp=38.2 sd_pos=351468 sysload=0.23 cputime=96.598 memavail=717500 print_time=1491.423 buffer_time=2.284 print_stall=0 extruder: target=200 temp=199.9 pwm=0.690
Stats 1487.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1545569 bytes_read=588214 bytes_retransmit=9 bytes_invalid=0 send_seq=36321 receive_seq=36319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=44.2 mcu_temp: temp=38.1 sd_pos=351954 sysload=0.23 cputime=96.682 memavail=717500 print_time=1492.744 buffer_time=2.600 print_stall=0 extruder: target=200 temp=199.7 pwm=0.741
Stats 1488.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1546848 bytes_read=588648 bytes_retransmit=9 bytes_invalid=0 send_seq=36349 receive_seq=36349 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=44.9 mcu_temp: temp=38.3 sd_pos=352082 sysload=0.23 cputime=96.754 memavail=716760 print_time=1493.510 buffer_time=2.365 print_stall=0 extruder: target=200 temp=199.7 pwm=0.741
Stats 1489.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1548326 bytes_read=589140 bytes_retransmit=9 bytes_invalid=0 send_seq=36382 receive_seq=36382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.6 mcu_temp: temp=38.2 sd_pos=352365 sysload=0.23 cputime=96.830 memavail=716576 print_time=1494.561 buffer_time=2.414 print_stall=0 extruder: target=200 temp=199.7 pwm=0.741
Stats 1490.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1550250 bytes_read=589609 bytes_retransmit=9 bytes_invalid=0 send_seq=36420 receive_seq=36419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.7 mcu_temp: temp=38.0 sd_pos=353046 sysload=0.23 cputime=96.909 memavail=716080 print_time=1495.460 buffer_time=2.310 print_stall=0 extruder: target=200 temp=199.7 pwm=0.741
Stats 1491.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1552221 bytes_read=590146 bytes_retransmit=9 bytes_invalid=0 send_seq=36462 receive_seq=36461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=5 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=44.5 mcu_temp: temp=38.1 sd_pos=353367 sysload=0.21 cputime=96.989 memavail=716080 print_time=1496.960 buffer_time=2.809 print_stall=0 extruder: target=200 temp=199.7 pwm=0.712
Stats 1492.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1553020 bytes_read=590558 bytes_retransmit=9 bytes_invalid=0 send_seq=36482 receive_seq=36481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.5 mcu_temp: temp=38.1 sd_pos=353593 sysload=0.21 cputime=97.067 memavail=716080 print_time=1497.194 buffer_time=2.043 print_stall=0 extruder: target=200 temp=199.9 pwm=0.712
Stats 1493.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1555244 bytes_read=591067 bytes_retransmit=9 bytes_invalid=0 send_seq=36526 receive_seq=36526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=45.4 mcu_temp: temp=38.1 sd_pos=354076 sysload=0.21 cputime=97.139 memavail=716080 print_time=1498.605 buffer_time=2.453 print_stall=0 extruder: target=200 temp=200.0 pwm=0.604
Stats 1494.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1556394 bytes_read=591491 bytes_retransmit=9 bytes_invalid=0 send_seq=36554 receive_seq=36554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=44.7 mcu_temp: temp=38.3 sd_pos=354276 sysload=0.21 cputime=97.211 memavail=716340 print_time=1499.445 buffer_time=2.291 print_stall=0 extruder: target=200 temp=200.1 pwm=0.604
Stats 1495.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1558214 bytes_read=591998 bytes_retransmit=9 bytes_invalid=0 send_seq=36590 receive_seq=36590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.321 raspberry_pi: temp=44.7 mcu_temp: temp=38.2 sd_pos=354761 sysload=0.21 cputime=97.291 memavail=716088 print_time=1500.399 buffer_time=2.242 print_stall=0 extruder: target=200 temp=200.1 pwm=0.604
Stats 1496.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1560095 bytes_read=592457 bytes_retransmit=9 bytes_invalid=0 send_seq=36628 receive_seq=36622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.7 mcu_temp: temp=38.1 sd_pos=355103 sysload=0.19 cputime=97.370 memavail=716208 print_time=1502.654 buffer_time=3.496 print_stall=0 extruder: target=200 temp=200.2 pwm=0.604
Stats 1497.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1560292 bytes_read=592841 bytes_retransmit=9 bytes_invalid=0 send_seq=36639 receive_seq=36639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.3 mcu_temp: temp=38.3 sd_pos=355103 sysload=0.19 cputime=97.436 memavail=715920 print_time=1502.654 buffer_time=2.495 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 1498.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1561328 bytes_read=593273 bytes_retransmit=9 bytes_invalid=0 send_seq=36663 receive_seq=36663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=43.8 mcu_temp: temp=38.3 sd_pos=355327 sysload=0.19 cputime=97.510 memavail=716500 print_time=1503.721 buffer_time=2.561 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 1499.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1562737 bytes_read=593712 bytes_retransmit=9 bytes_invalid=0 send_seq=36694 receive_seq=36694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=355515 sysload=0.19 cputime=97.584 memavail=716288 print_time=1505.476 buffer_time=3.315 print_stall=0 extruder: target=200 temp=200.0 pwm=0.734
Stats 1500.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1562910 bytes_read=594071 bytes_retransmit=9 bytes_invalid=0 send_seq=36706 receive_seq=36706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=355515 sysload=0.19 cputime=97.653 memavail=716304 print_time=1505.476 buffer_time=2.314 print_stall=0 extruder: target=200 temp=199.9 pwm=0.734
Stats 1501.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1565018 bytes_read=594608 bytes_retransmit=9 bytes_invalid=0 send_seq=36748 receive_seq=36748 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.2 mcu_temp: temp=38.2 sd_pos=355884 sysload=0.18 cputime=97.734 memavail=717060 print_time=1506.584 buffer_time=2.421 print_stall=0 extruder: target=200 temp=199.8 pwm=0.734
Stats 1502.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1566820 bytes_read=595077 bytes_retransmit=9 bytes_invalid=0 send_seq=36785 receive_seq=36785 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.2 mcu_temp: temp=38.1 sd_pos=356519 sysload=0.18 cputime=97.808 memavail=717060 print_time=1507.390 buffer_time=2.227 print_stall=0 extruder: target=200 temp=199.8 pwm=0.734
Stats 1503.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1568729 bytes_read=595566 bytes_retransmit=9 bytes_invalid=0 send_seq=36823 receive_seq=36823 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.8 mcu_temp: temp=38.2 sd_pos=356868 sysload=0.18 cputime=97.883 memavail=717324 print_time=1508.652 buffer_time=2.489 print_stall=0 extruder: target=200 temp=199.7 pwm=0.723
Stats 1504.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1570499 bytes_read=596058 bytes_retransmit=9 bytes_invalid=0 send_seq=36859 receive_seq=36859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=357285 sysload=0.18 cputime=97.958 memavail=717348 print_time=1509.465 buffer_time=2.301 print_stall=0 extruder: target=200 temp=199.8 pwm=0.723
Stats 1505.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1571793 bytes_read=596482 bytes_retransmit=9 bytes_invalid=0 send_seq=36888 receive_seq=36888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.8 mcu_temp: temp=38.3 sd_pos=357505 sysload=0.18 cputime=98.031 memavail=716624 print_time=1510.250 buffer_time=2.085 print_stall=0 extruder: target=200 temp=199.8 pwm=0.723
Stats 1506.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1574282 bytes_read=597030 bytes_retransmit=9 bytes_invalid=0 send_seq=36937 receive_seq=36937 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.423 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=357949 sysload=0.16 cputime=98.109 memavail=716632 print_time=1512.039 buffer_time=2.873 print_stall=0 extruder: target=200 temp=199.8 pwm=0.723
Stats 1507.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1575069 bytes_read=597440 bytes_retransmit=9 bytes_invalid=0 send_seq=36957 receive_seq=36957 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.423 raspberry_pi: temp=43.7 mcu_temp: temp=38.3 sd_pos=358207 sysload=0.16 cputime=98.180 memavail=716760 print_time=1512.270 buffer_time=2.102 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 1508.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1577286 bytes_read=597939 bytes_retransmit=9 bytes_invalid=0 send_seq=37000 receive_seq=37000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.2 mcu_temp: temp=38.2 sd_pos=358715 sysload=0.16 cputime=98.259 memavail=716520 print_time=1513.625 buffer_time=2.457 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 1509.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1578440 bytes_read=598368 bytes_retransmit=9 bytes_invalid=0 send_seq=37026 receive_seq=37026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.469 raspberry_pi: temp=43.6 mcu_temp: temp=38.3 sd_pos=358979 sysload=0.16 cputime=98.328 memavail=716520 print_time=1514.441 buffer_time=2.272 print_stall=0 extruder: target=200 temp=200.0 pwm=0.684
Stats 1510.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1580463 bytes_read=598885 bytes_retransmit=9 bytes_invalid=0 send_seq=37067 receive_seq=37067 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.4 mcu_temp: temp=38.2 sd_pos=359627 sysload=0.16 cputime=98.407 memavail=716520 print_time=1515.378 buffer_time=2.209 print_stall=0 extruder: target=200 temp=200.1 pwm=0.684
Stats 1511.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1582675 bytes_read=599399 bytes_retransmit=9 bytes_invalid=0 send_seq=37110 receive_seq=37110 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.6 mcu_temp: temp=38.3 sd_pos=360011 sysload=0.23 cputime=98.485 memavail=716532 print_time=1517.044 buffer_time=2.873 print_stall=0 extruder: target=200 temp=200.1 pwm=0.684
Stats 1512.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1583350 bytes_read=599793 bytes_retransmit=9 bytes_invalid=0 send_seq=37129 receive_seq=37129 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=360170 sysload=0.23 cputime=98.553 memavail=716532 print_time=1517.255 buffer_time=2.084 print_stall=0 extruder: target=200 temp=200.3 pwm=0.642
Stats 1513.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1585540 bytes_read=600325 bytes_retransmit=9 bytes_invalid=0 send_seq=37173 receive_seq=37173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.6 mcu_temp: temp=38.3 sd_pos=360604 sysload=0.23 cputime=98.632 memavail=716300 print_time=1518.719 buffer_time=2.547 print_stall=0 extruder: target=200 temp=200.4 pwm=0.587
Stats 1514.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1586983 bytes_read=600774 bytes_retransmit=9 bytes_invalid=0 send_seq=37206 receive_seq=37206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 sd_pos=360944 sysload=0.23 cputime=98.707 memavail=716060 print_time=1520.281 buffer_time=3.108 print_stall=0 extruder: target=200 temp=200.4 pwm=0.587
Stats 1515.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1587156 bytes_read=601133 bytes_retransmit=9 bytes_invalid=0 send_seq=37218 receive_seq=37218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.7 mcu_temp: temp=38.2 sd_pos=360944 sysload=0.23 cputime=98.772 memavail=715864 print_time=1520.281 buffer_time=2.107 print_stall=0 extruder: target=200 temp=200.5 pwm=0.587
Stats 1516.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1588243 bytes_read=601595 bytes_retransmit=9 bytes_invalid=0 send_seq=37245 receive_seq=37245 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.7 mcu_temp: temp=38.3 sd_pos=361166 sysload=0.29 cputime=98.854 memavail=715360 print_time=1521.347 buffer_time=2.173 print_stall=0 extruder: target=200 temp=200.5 pwm=0.587
Stats 1517.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1589255 bytes_read=602009 bytes_retransmit=9 bytes_invalid=0 send_seq=37271 receive_seq=37271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.7 mcu_temp: temp=38.4 sd_pos=361294 sysload=0.29 cputime=98.925 memavail=715368 print_time=1522.844 buffer_time=2.669 print_stall=0 extruder: target=200 temp=200.4 pwm=0.651
Stats 1518.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1590444 bytes_read=602448 bytes_retransmit=9 bytes_invalid=0 send_seq=37299 receive_seq=37299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.9 mcu_temp: temp=38.2 sd_pos=361402 sysload=0.29 cputime=98.996 memavail=715372 print_time=1523.598 buffer_time=2.421 print_stall=0 extruder: target=200 temp=200.4 pwm=0.651
Stats 1519.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1591656 bytes_read=602905 bytes_retransmit=9 bytes_invalid=0 send_seq=37328 receive_seq=37328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.7 mcu_temp: temp=38.4 sd_pos=361589 sysload=0.29 cputime=99.068 memavail=715400 print_time=1524.230 buffer_time=2.053 print_stall=0 extruder: target=200 temp=200.3 pwm=0.651
Stats 1520.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1593604 bytes_read=603394 bytes_retransmit=9 bytes_invalid=0 send_seq=37369 receive_seq=37369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=43.6 mcu_temp: temp=38.5 sd_pos=362208 sysload=0.29 cputime=99.147 memavail=715636 print_time=1525.178 buffer_time=1.999 print_stall=0 extruder: target=200 temp=200.2 pwm=0.727
Stats 1521.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1595680 bytes_read=603913 bytes_retransmit=9 bytes_invalid=0 send_seq=37410 receive_seq=37410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.321 raspberry_pi: temp=43.3 mcu_temp: temp=38.1 sd_pos=362577 sysload=0.43 cputime=99.220 memavail=715660 print_time=1526.240 buffer_time=2.061 print_stall=0 extruder: target=200 temp=200.1 pwm=0.727
Stats 1522.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1597700 bytes_read=604425 bytes_retransmit=9 bytes_invalid=0 send_seq=37450 receive_seq=37450 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=44.2 mcu_temp: temp=38.3 sd_pos=363030 sysload=0.43 cputime=99.296 memavail=715664 print_time=1527.284 buffer_time=2.105 print_stall=0 extruder: target=200 temp=200.0 pwm=0.727
Stats 1523.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1599626 bytes_read=604904 bytes_retransmit=9 bytes_invalid=0 send_seq=37489 receive_seq=37489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=363402 sysload=0.43 cputime=99.366 memavail=715412 print_time=1528.397 buffer_time=2.216 print_stall=0 extruder: target=200 temp=199.9 pwm=0.727
Stats 1524.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1601777 bytes_read=605423 bytes_retransmit=9 bytes_invalid=0 send_seq=37533 receive_seq=37533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=43.8 mcu_temp: temp=38.1 sd_pos=363985 sysload=0.43 cputime=99.447 memavail=715424 print_time=1529.980 buffer_time=2.798 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 1525.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1602700 bytes_read=605850 bytes_retransmit=9 bytes_invalid=0 send_seq=37556 receive_seq=37556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=364242 sysload=0.43 cputime=99.516 memavail=716460 print_time=1530.238 buffer_time=2.057 print_stall=0 extruder: target=200 temp=200.0 pwm=0.639
Stats 1526.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1604924 bytes_read=606375 bytes_retransmit=9 bytes_invalid=0 send_seq=37601 receive_seq=37601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=43.7 mcu_temp: temp=38.3 sd_pos=364756 sysload=0.72 cputime=99.584 memavail=716480 print_time=1531.598 buffer_time=2.415 print_stall=0 extruder: target=200 temp=200.0 pwm=0.639
Stats 1527.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1606394 bytes_read=606829 bytes_retransmit=9 bytes_invalid=0 send_seq=37632 receive_seq=37632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=43.8 mcu_temp: temp=38.2 sd_pos=365086 sysload=0.72 cputime=99.648 memavail=716556 print_time=1532.507 buffer_time=2.323 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1528.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1608310 bytes_read=607336 bytes_retransmit=9 bytes_invalid=0 send_seq=37671 receive_seq=37671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=43.9 mcu_temp: temp=38.2 sd_pos=365772 sysload=0.72 cputime=99.721 memavail=716892 print_time=1533.401 buffer_time=2.216 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1529.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1610599 bytes_read=607855 bytes_retransmit=9 bytes_invalid=0 send_seq=37718 receive_seq=37718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=43.9 mcu_temp: temp=38.3 sd_pos=366159 sysload=0.72 cputime=99.789 memavail=717144 print_time=1535.073 buffer_time=2.888 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1530.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1611299 bytes_read=608254 bytes_retransmit=9 bytes_invalid=0 send_seq=37738 receive_seq=37738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=43.9 mcu_temp: temp=38.1 sd_pos=366317 sysload=0.72 cputime=99.850 memavail=717648 print_time=1535.290 buffer_time=2.105 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1531.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1613561 bytes_read=608795 bytes_retransmit=9 bytes_invalid=0 send_seq=37783 receive_seq=37783 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=366780 sysload=0.74 cputime=99.922 memavail=717908 print_time=1536.754 buffer_time=2.568 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1532.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1614833 bytes_read=609212 bytes_retransmit=9 bytes_invalid=0 send_seq=37811 receive_seq=37811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=43.9 mcu_temp: temp=38.2 sd_pos=367071 sysload=0.74 cputime=99.986 memavail=718412 print_time=1538.285 buffer_time=3.098 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1533.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1615011 bytes_read=609576 bytes_retransmit=9 bytes_invalid=0 send_seq=37824 receive_seq=37824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=367071 sysload=0.74 cputime=100.044 memavail=718664 print_time=1538.285 buffer_time=2.097 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 1534.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1616556 bytes_read=610048 bytes_retransmit=9 bytes_invalid=0 send_seq=37856 receive_seq=37856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=367481 sysload=0.74 cputime=100.112 memavail=719164 print_time=1539.577 buffer_time=2.388 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 1535.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1617953 bytes_read=610487 bytes_retransmit=9 bytes_invalid=0 send_seq=37887 receive_seq=37887 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=367671 sysload=0.74 cputime=100.176 memavail=718920 print_time=1541.314 buffer_time=3.125 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1536.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1618131 bytes_read=610866 bytes_retransmit=9 bytes_invalid=0 send_seq=37900 receive_seq=37900 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=43.9 mcu_temp: temp=38.1 sd_pos=367671 sysload=0.68 cputime=100.238 memavail=718676 print_time=1541.314 buffer_time=2.124 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1537.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1620225 bytes_read=611393 bytes_retransmit=9 bytes_invalid=0 send_seq=37943 receive_seq=37943 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=43.9 mcu_temp: temp=38.2 sd_pos=368077 sysload=0.68 cputime=100.307 memavail=718676 print_time=1542.428 buffer_time=2.237 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1538.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1622800 bytes_read=611927 bytes_retransmit=9 bytes_invalid=0 send_seq=37993 receive_seq=37993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=43.4 mcu_temp: temp=38.3 sd_pos=368864 sysload=0.68 cputime=100.380 memavail=718728 print_time=1543.836 buffer_time=2.644 print_stall=0 extruder: target=200 temp=199.9 pwm=0.681
Stats 1539.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1623759 bytes_read=612346 bytes_retransmit=9 bytes_invalid=0 send_seq=38017 receive_seq=38017 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=369122 sysload=0.68 cputime=100.443 memavail=719060 print_time=1544.295 buffer_time=2.102 print_stall=0 extruder: target=200 temp=199.8 pwm=0.681
Stats 1540.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1625643 bytes_read=612848 bytes_retransmit=9 bytes_invalid=0 send_seq=38055 receive_seq=38055 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=369573 sysload=0.68 cputime=100.511 memavail=718820 print_time=1545.236 buffer_time=2.043 print_stall=0 extruder: target=200 temp=199.8 pwm=0.681
Stats 1541.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1628328 bytes_read=613412 bytes_retransmit=9 bytes_invalid=0 send_seq=38108 receive_seq=38108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=43.7 mcu_temp: temp=38.2 sd_pos=370141 sysload=0.62 cputime=100.594 memavail=719332 print_time=1547.021 buffer_time=2.828 print_stall=0 extruder: target=200 temp=199.9 pwm=0.681
Stats 1542.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1629217 bytes_read=613831 bytes_retransmit=9 bytes_invalid=0 send_seq=38132 receive_seq=38132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.2 mcu_temp: temp=38.4 sd_pos=370400 sysload=0.62 cputime=100.658 memavail=719584 print_time=1547.289 buffer_time=2.095 print_stall=0 extruder: target=200 temp=199.8 pwm=0.688
Stats 1543.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1631550 bytes_read=614378 bytes_retransmit=9 bytes_invalid=0 send_seq=38179 receive_seq=38179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=370944 sysload=0.62 cputime=100.728 memavail=720344 print_time=1548.644 buffer_time=2.448 print_stall=0 extruder: target=200 temp=199.8 pwm=0.688
Stats 1544.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1633011 bytes_read=614832 bytes_retransmit=9 bytes_invalid=0 send_seq=38213 receive_seq=38213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=371336 sysload=0.62 cputime=100.791 memavail=720344 print_time=1549.571 buffer_time=2.375 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1545.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1635054 bytes_read=615336 bytes_retransmit=9 bytes_invalid=0 send_seq=38254 receive_seq=38254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=371984 sysload=0.62 cputime=100.860 memavail=720876 print_time=1550.487 buffer_time=2.290 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1546.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1637218 bytes_read=615825 bytes_retransmit=9 bytes_invalid=0 send_seq=38298 receive_seq=38286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=124 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 sd_pos=372437 sysload=0.57 cputime=100.927 memavail=720384 print_time=1552.164 buffer_time=2.961 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 1547.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1638204 bytes_read=616299 bytes_retransmit=9 bytes_invalid=0 send_seq=38324 receive_seq=38324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.324 raspberry_pi: temp=43.7 mcu_temp: temp=38.3 sd_pos=372598 sysload=0.57 cputime=100.986 memavail=720656 print_time=1552.390 buffer_time=2.187 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 1548.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1640358 bytes_read=616813 bytes_retransmit=9 bytes_invalid=0 send_seq=38367 receive_seq=38367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.485 raspberry_pi: temp=43.7 mcu_temp: temp=38.1 sd_pos=373033 sysload=0.57 cputime=101.054 memavail=721160 print_time=1553.851 buffer_time=2.647 print_stall=0 extruder: target=200 temp=200.0 pwm=0.626
Stats 1549.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1641442 bytes_read=617255 bytes_retransmit=9 bytes_invalid=0 send_seq=38393 receive_seq=38393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=373280 sysload=0.57 cputime=101.116 memavail=721160 print_time=1555.284 buffer_time=3.080 print_stall=0 extruder: target=200 temp=200.1 pwm=0.626
Stats 1550.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=1641629 bytes_read=617594 bytes_retransmit=9 bytes_invalid=0 send_seq=38404 receive_seq=38404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=373280 sysload=0.57 cputime=101.172 memavail=721664 print_time=1555.284 buffer_time=2.079 print_stall=0 extruder: target=200 temp=200.0 pwm=0.626
Stats 1551.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1643308 bytes_read=618104 bytes_retransmit=9 bytes_invalid=0 send_seq=38441 receive_seq=38441 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.442 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=373729 sysload=0.53 cputime=101.239 memavail=720920 print_time=1556.704 buffer_time=2.498 print_stall=0 extruder: target=200 temp=200.1 pwm=0.626
Stats 1552.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1644738 bytes_read=618581 bytes_retransmit=9 bytes_invalid=0 send_seq=38474 receive_seq=38474 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=44.2 mcu_temp: temp=38.1 sd_pos=373921 sysload=0.53 cputime=101.305 memavail=721172 print_time=1558.432 buffer_time=3.226 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 1553.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1644914 bytes_read=618930 bytes_retransmit=9 bytes_invalid=0 send_seq=38487 receive_seq=38487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.3 mcu_temp: temp=38.4 sd_pos=373921 sysload=0.53 cputime=101.363 memavail=720920 print_time=1558.432 buffer_time=2.225 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 1554.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1647038 bytes_read=619458 bytes_retransmit=9 bytes_invalid=0 send_seq=38530 receive_seq=38530 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.2 mcu_temp: temp=38.3 sd_pos=374326 sysload=0.53 cputime=101.432 memavail=720868 print_time=1559.554 buffer_time=2.346 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 1555.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1648790 bytes_read=619946 bytes_retransmit=9 bytes_invalid=0 send_seq=38568 receive_seq=38568 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=44.3 mcu_temp: temp=38.2 sd_pos=375008 sysload=0.53 cputime=101.500 memavail=720164 print_time=1560.307 buffer_time=2.098 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1556.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1650756 bytes_read=620451 bytes_retransmit=9 bytes_invalid=0 send_seq=38610 receive_seq=38610 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=44.3 mcu_temp: temp=38.3 sd_pos=375367 sysload=0.49 cputime=101.570 memavail=720416 print_time=1561.436 buffer_time=2.228 print_stall=0 extruder: target=200 temp=199.9 pwm=0.717
Stats 1557.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1652638 bytes_read=620942 bytes_retransmit=9 bytes_invalid=0 send_seq=38649 receive_seq=38648 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=44.4 mcu_temp: temp=38.4 sd_pos=375816 sysload=0.49 cputime=101.638 memavail=720176 print_time=1562.389 buffer_time=2.179 print_stall=0 extruder: target=200 temp=199.8 pwm=0.717
Stats 1558.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1655231 bytes_read=621499 bytes_retransmit=9 bytes_invalid=0 send_seq=38700 receive_seq=38700 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=44.5 mcu_temp: temp=38.5 sd_pos=376445 sysload=0.49 cputime=101.708 memavail=719924 print_time=1564.180 buffer_time=2.970 print_stall=0 extruder: target=200 temp=199.9 pwm=0.717
Stats 1559.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1656228 bytes_read=621913 bytes_retransmit=9 bytes_invalid=0 send_seq=38726 receive_seq=38726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996631 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=376706 sysload=0.49 cputime=101.770 memavail=719924 print_time=1564.465 buffer_time=2.254 print_stall=0 extruder: target=200 temp=199.8 pwm=0.717
Stats 1560.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1658396 bytes_read=622451 bytes_retransmit=9 bytes_invalid=0 send_seq=38771 receive_seq=38771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=44.4 mcu_temp: temp=38.3 sd_pos=377190 sysload=0.49 cputime=101.840 memavail=719924 print_time=1565.811 buffer_time=2.599 print_stall=0 extruder: target=200 temp=199.9 pwm=0.695
Stats 1561.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1659956 bytes_read=622934 bytes_retransmit=9 bytes_invalid=0 send_seq=38805 receive_seq=38805 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=377620 sysload=0.45 cputime=101.904 memavail=719432 print_time=1566.746 buffer_time=2.533 print_stall=0 extruder: target=200 temp=200.0 pwm=0.695
Stats 1562.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1662113 bytes_read=623438 bytes_retransmit=9 bytes_invalid=0 send_seq=38849 receive_seq=38849 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.1 mcu_temp: temp=38.2 sd_pos=378292 sysload=0.45 cputime=101.976 memavail=719192 print_time=1567.674 buffer_time=2.460 print_stall=0 extruder: target=200 temp=200.1 pwm=0.620
Stats 1563.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1663183 bytes_read=623886 bytes_retransmit=9 bytes_invalid=0 send_seq=38876 receive_seq=38876 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=44.4 mcu_temp: temp=38.3 sd_pos=378386 sysload=0.45 cputime=102.039 memavail=718940 print_time=1568.381 buffer_time=2.167 print_stall=0 extruder: target=200 temp=200.1 pwm=0.620
Stats 1564.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1664621 bytes_read=624344 bytes_retransmit=9 bytes_invalid=0 send_seq=38908 receive_seq=38908 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=44.7 mcu_temp: temp=38.3 sd_pos=378723 sysload=0.45 cputime=102.104 memavail=718940 print_time=1569.352 buffer_time=2.136 print_stall=0 extruder: target=200 temp=200.2 pwm=0.620
Stats 1565.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1666681 bytes_read=624843 bytes_retransmit=9 bytes_invalid=0 send_seq=38951 receive_seq=38951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.6 mcu_temp: temp=38.4 sd_pos=379283 sysload=0.45 cputime=102.169 memavail=718212 print_time=1570.293 buffer_time=2.077 print_stall=0 extruder: target=200 temp=200.3 pwm=0.620
Stats 1566.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1667945 bytes_read=625316 bytes_retransmit=9 bytes_invalid=0 send_seq=38980 receive_seq=38980 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.2 mcu_temp: temp=38.3 sd_pos=379385 sysload=0.41 cputime=102.230 memavail=718216 print_time=1571.277 buffer_time=2.060 print_stall=0 extruder: target=200 temp=200.2 pwm=0.620
Stats 1567.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1670274 bytes_read=625854 bytes_retransmit=9 bytes_invalid=0 send_seq=39028 receive_seq=39028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.447 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=379598 sysload=0.41 cputime=102.297 memavail=717732 print_time=1572.828 buffer_time=2.610 print_stall=0 extruder: target=200 temp=200.2 pwm=0.639
Stats 1568.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1671608 bytes_read=626293 bytes_retransmit=9 bytes_invalid=0 send_seq=39059 receive_seq=39059 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.4 mcu_temp: temp=38.3 sd_pos=379851 sysload=0.41 cputime=102.361 memavail=717480 print_time=1574.509 buffer_time=3.290 print_stall=0 extruder: target=200 temp=200.2 pwm=0.698
Stats 1569.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1671805 bytes_read=626671 bytes_retransmit=9 bytes_invalid=0 send_seq=39072 receive_seq=39072 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=379851 sysload=0.41 cputime=102.419 memavail=717480 print_time=1574.509 buffer_time=2.289 print_stall=0 extruder: target=200 temp=200.1 pwm=0.698
Stats 1570.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1673530 bytes_read=627144 bytes_retransmit=9 bytes_invalid=0 send_seq=39107 receive_seq=39107 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.6 mcu_temp: temp=38.3 sd_pos=380269 sysload=0.41 cputime=102.485 memavail=717992 print_time=1575.928 buffer_time=2.708 print_stall=0 extruder: target=200 temp=200.1 pwm=0.698
Stats 1571.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1674851 bytes_read=627593 bytes_retransmit=9 bytes_invalid=0 send_seq=39137 receive_seq=39137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.4 mcu_temp: temp=38.4 sd_pos=380464 sysload=0.38 cputime=102.549 memavail=718244 print_time=1577.647 buffer_time=3.427 print_stall=0 extruder: target=200 temp=200.0 pwm=0.698
Stats 1572.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1675069 bytes_read=627966 bytes_retransmit=9 bytes_invalid=0 send_seq=39149 receive_seq=39149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.4 mcu_temp: temp=38.5 sd_pos=380464 sysload=0.38 cputime=102.607 memavail=717992 print_time=1577.647 buffer_time=2.426 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 1573.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1677166 bytes_read=628479 bytes_retransmit=9 bytes_invalid=0 send_seq=39192 receive_seq=39192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.4 mcu_temp: temp=38.2 sd_pos=380869 sysload=0.38 cputime=102.675 memavail=717504 print_time=1578.779 buffer_time=2.556 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1574.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1678460 bytes_read=628913 bytes_retransmit=9 bytes_invalid=0 send_seq=39222 receive_seq=39222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996686 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=43.6 mcu_temp: temp=38.4 sd_pos=381287 sysload=0.38 cputime=102.737 memavail=717504 print_time=1579.347 buffer_time=2.125 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1575.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1680824 bytes_read=629406 bytes_retransmit=9 bytes_invalid=0 send_seq=39270 receive_seq=39258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=103 upcoming_bytes=0 freq=167996678 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=43.2 mcu_temp: temp=38.3 sd_pos=381903 sysload=0.38 cputime=102.807 memavail=717380 print_time=1580.682 buffer_time=2.457 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 1576.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1682813 bytes_read=629989 bytes_retransmit=9 bytes_invalid=0 send_seq=39312 receive_seq=39312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=43.8 mcu_temp: temp=38.2 sd_pos=382353 sysload=0.35 cputime=102.876 memavail=717380 print_time=1581.648 buffer_time=2.423 print_stall=0 extruder: target=200 temp=199.9 pwm=0.671
Stats 1577.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1684395 bytes_read=630448 bytes_retransmit=9 bytes_invalid=0 send_seq=39347 receive_seq=39347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996660 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=43.6 mcu_temp: temp=38.3 sd_pos=382595 sysload=0.35 cputime=102.944 memavail=716888 print_time=1582.462 buffer_time=2.236 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 1578.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1685813 bytes_read=630916 bytes_retransmit=9 bytes_invalid=0 send_seq=39378 receive_seq=39378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996652 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=43.6 mcu_temp: temp=38.4 sd_pos=383019 sysload=0.35 cputime=103.008 memavail=716888 print_time=1583.440 buffer_time=2.213 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 1579.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1688157 bytes_read=631444 bytes_retransmit=9 bytes_invalid=0 send_seq=39424 receive_seq=39424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=44.1 mcu_temp: temp=38.2 sd_pos=383804 sysload=0.35 cputime=103.077 memavail=716384 print_time=1584.422 buffer_time=2.194 print_stall=0 extruder: target=200 temp=200.1 pwm=0.671
Stats 1580.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1690636 bytes_read=631973 bytes_retransmit=9 bytes_invalid=0 send_seq=39473 receive_seq=39473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=167996633 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=43.6 mcu_temp: temp=38.3 sd_pos=384387 sysload=0.35 cputime=103.146 memavail=716384 print_time=1586.082 buffer_time=2.853 print_stall=0 extruder: target=200 temp=200.1 pwm=0.642
Stats 1581.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=1691336 bytes_read=632407 bytes_retransmit=9 bytes_invalid=0 send_seq=39494 receive_seq=39494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=43.9 mcu_temp: temp=38.3 sd_pos=384613 sysload=0.32 cputime=103.208 memavail=716384 print_time=1586.273 buffer_time=2.044 print_stall=0 extruder: target=200 temp=200.1 pwm=0.642
Stats 1582.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=1693825 bytes_read=632934 bytes_retransmit=9 bytes_invalid=0 send_seq=39542 receive_seq=39542 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=43.8 mcu_temp: temp=38.2 sd_pos=385226 sysload=0.32 cputime=103.282 memavail=716676 print_time=1587.709 buffer_time=2.480 print_stall=0 extruder: target=200 temp=200.2 pwm=0.589
Stats 1583.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=1695261 bytes_read=633376 bytes_retransmit=9 bytes_invalid=0 send_seq=39575 receive_seq=39575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=43.9 mcu_temp: temp=38.3 sd_pos=385532 sysload=0.32 cputime=103.346 memavail=716676 print_time=1588.641 buffer_time=2.411 print_stall=0 extruder: target=200 temp=200.2 pwm=0.640
Stats 1584.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=1697455 bytes_read=633909 bytes_retransmit=9 bytes_invalid=0 send_seq=39619 receive_seq=39619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.3 mcu_temp: temp=38.1 sd_pos=386187 sysload=0.32 cputime=103.416 memavail=716688 print_time=1589.720 buffer_time=2.489 print_stall=0 extruder: target=200 temp=200.2 pwm=0.640
Stats 1585.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=1698810 bytes_read=634357 bytes_retransmit=9 bytes_invalid=0 send_seq=39649 receive_seq=39649 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.423 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=386459 sysload=0.32 cputime=103.480 memavail=716212 print_time=1590.600 buffer_time=2.369 print_stall=0 extruder: target=200 temp=200.2 pwm=0.640
Stats 1586.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1699912 bytes_read=634786 bytes_retransmit=9 bytes_invalid=0 send_seq=39675 receive_seq=39675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.9 mcu_temp: temp=38.2 sd_pos=386724 sysload=0.29 cputime=103.544 memavail=716492 print_time=1592.031 buffer_time=2.798 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 1587.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1700844 bytes_read=635224 bytes_retransmit=9 bytes_invalid=0 send_seq=39700 receive_seq=39700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.3 mcu_temp: temp=38.2 sd_pos=386952 sysload=0.29 cputime=103.611 memavail=716260 print_time=1592.406 buffer_time=2.173 print_stall=0 extruder: target=200 temp=200.1 pwm=0.669
Stats 1588.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1702206 bytes_read=635672 bytes_retransmit=9 bytes_invalid=0 send_seq=39730 receive_seq=39730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.327 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=387285 sysload=0.29 cputime=103.676 memavail=716512 print_time=1593.500 buffer_time=2.267 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 1589.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1703187 bytes_read=636086 bytes_retransmit=9 bytes_invalid=0 send_seq=39756 receive_seq=39756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=44.0 mcu_temp: temp=38.4 sd_pos=387415 sysload=0.29 cputime=103.738 memavail=716516 print_time=1594.979 buffer_time=2.744 print_stall=0 extruder: target=200 temp=199.9 pwm=0.726
Stats 1590.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1704163 bytes_read=636524 bytes_retransmit=9 bytes_invalid=0 send_seq=39781 receive_seq=39781 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=43.8 mcu_temp: temp=38.3 sd_pos=387483 sysload=0.29 cputime=103.801 memavail=716516 print_time=1595.517 buffer_time=2.282 print_stall=0 extruder: target=200 temp=199.8 pwm=0.726
Stats 1591.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1705358 bytes_read=636982 bytes_retransmit=9 bytes_invalid=0 send_seq=39810 receive_seq=39810 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.334 raspberry_pi: temp=43.6 mcu_temp: temp=38.3 sd_pos=387617 sysload=0.27 cputime=103.864 memavail=716768 print_time=1596.288 buffer_time=2.052 print_stall=0 extruder: target=200 temp=199.7 pwm=0.726
Stats 1592.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1707654 bytes_read=637491 bytes_retransmit=9 bytes_invalid=0 send_seq=39855 receive_seq=39855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.468 raspberry_pi: temp=44.5 mcu_temp: temp=38.2 sd_pos=388085 sysload=0.27 cputime=103.933 memavail=716768 print_time=1597.506 buffer_time=2.269 print_stall=0 extruder: target=200 temp=199.6 pwm=0.726
Stats 1593.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1709395 bytes_read=637994 bytes_retransmit=9 bytes_invalid=0 send_seq=39893 receive_seq=39893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.306 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=388767 sysload=0.27 cputime=104.002 memavail=716792 print_time=1598.303 buffer_time=2.065 print_stall=0 extruder: target=200 temp=199.6 pwm=0.743
Stats 1594.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1711450 bytes_read=638502 bytes_retransmit=9 bytes_invalid=0 send_seq=39935 receive_seq=39935 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=44.2 mcu_temp: temp=38.3 sd_pos=389134 sysload=0.27 cputime=104.072 memavail=717056 print_time=1599.364 buffer_time=2.126 print_stall=0 extruder: target=200 temp=199.6 pwm=0.743
Stats 1595.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1713606 bytes_read=639006 bytes_retransmit=9 bytes_invalid=0 send_seq=39979 receive_seq=39979 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=44.3 mcu_temp: temp=38.2 sd_pos=389470 sysload=0.27 cputime=104.142 memavail=717404 print_time=1600.554 buffer_time=2.315 print_stall=0 extruder: target=200 temp=199.7 pwm=0.678
Stats 1596.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1714886 bytes_read=639484 bytes_retransmit=9 bytes_invalid=0 send_seq=40009 receive_seq=40009 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.0 mcu_temp: temp=38.2 sd_pos=389706 sysload=0.25 cputime=104.209 memavail=717656 print_time=1601.283 buffer_time=2.043 print_stall=0 extruder: target=200 temp=199.7 pwm=0.678
Stats 1597.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1716583 bytes_read=639962 bytes_retransmit=9 bytes_invalid=0 send_seq=40045 receive_seq=40045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=43.9 mcu_temp: temp=38.4 sd_pos=390136 sysload=0.25 cputime=104.273 memavail=717412 print_time=1602.383 buffer_time=2.142 print_stall=0 extruder: target=200 temp=199.7 pwm=0.678
Stats 1598.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1718720 bytes_read=640461 bytes_retransmit=9 bytes_invalid=0 send_seq=40088 receive_seq=40088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.1 mcu_temp: temp=38.2 sd_pos=390951 sysload=0.25 cputime=104.345 memavail=717168 print_time=1603.287 buffer_time=2.045 print_stall=0 extruder: target=200 temp=199.8 pwm=0.678
Stats 1599.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1721108 bytes_read=641014 bytes_retransmit=9 bytes_invalid=0 send_seq=40136 receive_seq=40136 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.6 mcu_temp: temp=38.1 sd_pos=391505 sysload=0.25 cputime=104.414 memavail=717180 print_time=1604.910 buffer_time=2.667 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 1601.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1723483 bytes_read=641547 bytes_retransmit=9 bytes_invalid=0 send_seq=40183 receive_seq=40183 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=392281 sysload=0.25 cputime=104.486 memavail=716940 print_time=1605.909 buffer_time=2.665 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 1602.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1724496 bytes_read=641971 bytes_retransmit=9 bytes_invalid=0 send_seq=40208 receive_seq=40208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.1 mcu_temp: temp=38.1 sd_pos=392374 sysload=0.23 cputime=104.550 memavail=716944 print_time=1606.612 buffer_time=2.367 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 1603.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1725948 bytes_read=642449 bytes_retransmit=9 bytes_invalid=0 send_seq=40241 receive_seq=40241 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=44.0 mcu_temp: temp=38.4 sd_pos=392644 sysload=0.23 cputime=104.617 memavail=717228 print_time=1607.541 buffer_time=2.296 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 1604.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1728155 bytes_read=642972 bytes_retransmit=9 bytes_invalid=0 send_seq=40286 receive_seq=40286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.8 mcu_temp: temp=38.3 sd_pos=393296 sysload=0.23 cputime=104.693 memavail=717736 print_time=1608.624 buffer_time=2.379 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 1605.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1729596 bytes_read=643411 bytes_retransmit=9 bytes_invalid=0 send_seq=40317 receive_seq=40317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.9 mcu_temp: temp=38.3 sd_pos=393571 sysload=0.23 cputime=104.758 memavail=718256 print_time=1609.510 buffer_time=2.264 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 1606.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1730682 bytes_read=643854 bytes_retransmit=9 bytes_invalid=0 send_seq=40343 receive_seq=40343 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.9 mcu_temp: temp=38.2 sd_pos=393837 sysload=0.23 cputime=104.826 memavail=717788 print_time=1610.936 buffer_time=2.689 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 1607.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1731559 bytes_read=644282 bytes_retransmit=9 bytes_invalid=0 send_seq=40366 receive_seq=40366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.9 mcu_temp: temp=38.3 sd_pos=394097 sysload=0.21 cputime=104.889 memavail=718040 print_time=1611.330 buffer_time=2.082 print_stall=0 extruder: target=200 temp=200.1 pwm=0.686
Stats 1608.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1732831 bytes_read=644713 bytes_retransmit=9 bytes_invalid=0 send_seq=40396 receive_seq=40396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996566 heater_bed: target=60 temp=60.0 pwm=0.442 raspberry_pi: temp=44.1 mcu_temp: temp=38.4 sd_pos=394382 sysload=0.21 cputime=104.953 memavail=717988 print_time=1612.398 buffer_time=2.150 print_stall=0 extruder: target=200 temp=200.1 pwm=0.686
Stats 1609.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1734675 bytes_read=645217 bytes_retransmit=9 bytes_invalid=0 send_seq=40434 receive_seq=40434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.7 mcu_temp: temp=38.5 sd_pos=394762 sysload=0.21 cputime=105.028 memavail=718000 print_time=1614.341 buffer_time=3.092 print_stall=0 extruder: target=200 temp=200.1 pwm=0.708
Stats 1610.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1734837 bytes_read=645558 bytes_retransmit=9 bytes_invalid=0 send_seq=40446 receive_seq=40446 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=43.8 mcu_temp: temp=38.3 sd_pos=394762 sysload=0.21 cputime=105.086 memavail=718052 print_time=1614.341 buffer_time=2.091 print_stall=0 extruder: target=200 temp=200.1 pwm=0.708
Stats 1611.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1737012 bytes_read=646062 bytes_retransmit=9 bytes_invalid=0 send_seq=40490 receive_seq=40490 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=44.3 mcu_temp: temp=38.4 sd_pos=395221 sysload=0.21 cputime=105.156 memavail=717560 print_time=1615.528 buffer_time=2.276 print_stall=0 extruder: target=200 temp=200.1 pwm=0.708
Stats 1612.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1738305 bytes_read=646554 bytes_retransmit=9 bytes_invalid=0 send_seq=40520 receive_seq=40520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.0 mcu_temp: temp=38.5 sd_pos=395336 sysload=0.19 cputime=105.222 memavail=717824 print_time=1616.319 buffer_time=2.066 print_stall=0 extruder: target=200 temp=200.1 pwm=0.708
Stats 1613.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1741251 bytes_read=647134 bytes_retransmit=9 bytes_invalid=0 send_seq=40577 receive_seq=40577 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=44.4 mcu_temp: temp=38.5 sd_pos=396117 sysload=0.19 cputime=105.298 memavail=717824 print_time=1617.823 buffer_time=2.569 print_stall=0 extruder: target=200 temp=200.1 pwm=0.659
Stats 1614.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1742320 bytes_read=647553 bytes_retransmit=9 bytes_invalid=0 send_seq=40604 receive_seq=40604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.340 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=396369 sysload=0.19 cputime=105.366 memavail=717712 print_time=1618.291 buffer_time=2.038 print_stall=0 extruder: target=200 temp=200.1 pwm=0.659
Stats 1615.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1744306 bytes_read=648075 bytes_retransmit=9 bytes_invalid=0 send_seq=40643 receive_seq=40643 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.336 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=396816 sysload=0.19 cputime=105.439 memavail=717964 print_time=1619.289 buffer_time=2.035 print_stall=0 extruder: target=200 temp=200.2 pwm=0.659
Stats 1616.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1747036 bytes_read=648624 bytes_retransmit=9 bytes_invalid=0 send_seq=40696 receive_seq=40696 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.3 mcu_temp: temp=38.3 sd_pos=397182 sysload=0.19 cputime=105.516 memavail=718220 print_time=1620.852 buffer_time=2.597 print_stall=0 extruder: target=200 temp=200.2 pwm=0.659
Stats 1617.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1748017 bytes_read=649050 bytes_retransmit=9 bytes_invalid=0 send_seq=40721 receive_seq=40721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.0 mcu_temp: temp=38.4 sd_pos=397280 sysload=0.18 cputime=105.579 memavail=718220 print_time=1621.441 buffer_time=2.185 print_stall=0 extruder: target=200 temp=200.2 pwm=0.639
Stats 1618.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1750346 bytes_read=649612 bytes_retransmit=9 bytes_invalid=0 send_seq=40768 receive_seq=40768 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.0 mcu_temp: temp=38.4 sd_pos=397648 sysload=0.18 cputime=105.650 memavail=719004 print_time=1623.095 buffer_time=2.839 print_stall=0 extruder: target=200 temp=200.4 pwm=0.572
Stats 1619.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1751312 bytes_read=650016 bytes_retransmit=9 bytes_invalid=0 send_seq=40792 receive_seq=40792 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.2 mcu_temp: temp=38.5 sd_pos=397972 sysload=0.18 cputime=105.716 memavail=718752 print_time=1623.463 buffer_time=2.206 print_stall=0 extruder: target=200 temp=200.4 pwm=0.572
Stats 1620.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1753481 bytes_read=650535 bytes_retransmit=9 bytes_invalid=0 send_seq=40836 receive_seq=40836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.1 mcu_temp: temp=38.4 sd_pos=398540 sysload=0.18 cputime=105.787 memavail=718724 print_time=1624.440 buffer_time=2.182 print_stall=0 extruder: target=200 temp=200.4 pwm=0.625
Stats 1621.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1755835 bytes_read=651077 bytes_retransmit=9 bytes_invalid=0 send_seq=40882 receive_seq=40882 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=44.0 mcu_temp: temp=38.3 sd_pos=399092 sysload=0.18 cputime=105.860 memavail=719288 print_time=1626.081 buffer_time=2.822 print_stall=0 extruder: target=200 temp=200.4 pwm=0.625
Stats 1622.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1756587 bytes_read=651481 bytes_retransmit=9 bytes_invalid=0 send_seq=40903 receive_seq=40903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.1 mcu_temp: temp=38.3 sd_pos=399350 sysload=0.16 cputime=105.924 memavail=718796 print_time=1626.276 buffer_time=2.017 print_stall=0 extruder: target=200 temp=200.4 pwm=0.625
Stats 1623.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1759012 bytes_read=652020 bytes_retransmit=9 bytes_invalid=0 send_seq=40951 receive_seq=40951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=399997 sysload=0.16 cputime=105.997 memavail=719048 print_time=1627.662 buffer_time=2.402 print_stall=0 extruder: target=200 temp=200.3 pwm=0.625
Stats 1624.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1760531 bytes_read=652507 bytes_retransmit=9 bytes_invalid=0 send_seq=40986 receive_seq=40986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.9 mcu_temp: temp=38.4 sd_pos=400397 sysload=0.16 cputime=106.065 memavail=718824 print_time=1628.574 buffer_time=2.313 print_stall=0 extruder: target=200 temp=200.2 pwm=0.664
Stats 1625.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1763203 bytes_read=653051 bytes_retransmit=9 bytes_invalid=0 send_seq=41038 receive_seq=41038 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.7 mcu_temp: temp=38.4 sd_pos=401342 sysload=0.16 cputime=106.144 memavail=719340 print_time=1629.653 buffer_time=2.391 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 1626.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1764250 bytes_read=653485 bytes_retransmit=9 bytes_invalid=0 send_seq=41065 receive_seq=41065 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.333 raspberry_pi: temp=44.8 mcu_temp: temp=38.2 sd_pos=401450 sysload=0.16 cputime=106.210 memavail=719088 print_time=1630.354 buffer_time=2.091 print_stall=0 extruder: target=200 temp=200.1 pwm=0.664
Stats 1627.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1765400 bytes_read=653952 bytes_retransmit=9 bytes_invalid=0 send_seq=41093 receive_seq=41093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=44.7 mcu_temp: temp=38.6 sd_pos=401710 sysload=0.23 cputime=106.277 memavail=718836 print_time=1631.797 buffer_time=2.533 print_stall=0 extruder: target=200 temp=200.0 pwm=0.719
Stats 1628.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1767355 bytes_read=654436 bytes_retransmit=9 bytes_invalid=0 send_seq=41133 receive_seq=41133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.311 raspberry_pi: temp=43.9 mcu_temp: temp=38.5 sd_pos=402194 sysload=0.23 cputime=106.345 memavail=718596 print_time=1633.258 buffer_time=2.994 print_stall=0 extruder: target=200 temp=199.9 pwm=0.719
Stats 1629.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1768011 bytes_read=654830 bytes_retransmit=9 bytes_invalid=0 send_seq=41152 receive_seq=41152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=402357 sysload=0.23 cputime=106.407 memavail=717872 print_time=1633.519 buffer_time=2.255 print_stall=0 extruder: target=200 temp=199.9 pwm=0.719
Stats 1630.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1769466 bytes_read=655307 bytes_retransmit=9 bytes_invalid=0 send_seq=41185 receive_seq=41185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.318 raspberry_pi: temp=44.2 mcu_temp: temp=38.5 sd_pos=402516 sysload=0.23 cputime=106.477 memavail=718384 print_time=1635.203 buffer_time=2.938 print_stall=0 extruder: target=200 temp=199.9 pwm=0.719
Stats 1631.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1770598 bytes_read=655731 bytes_retransmit=9 bytes_invalid=0 send_seq=41213 receive_seq=41213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.5 mcu_temp: temp=38.4 sd_pos=402837 sysload=0.23 cputime=106.540 memavail=718420 print_time=1635.724 buffer_time=2.458 print_stall=0 extruder: target=200 temp=199.8 pwm=0.719
Stats 1632.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1771817 bytes_read=656185 bytes_retransmit=9 bytes_invalid=0 send_seq=41241 receive_seq=41241 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=45.4 mcu_temp: temp=38.6 sd_pos=402981 sysload=0.29 cputime=106.602 memavail=718924 print_time=1636.405 buffer_time=2.139 print_stall=0 extruder: target=200 temp=199.9 pwm=0.695
Stats 1633.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1774251 bytes_read=656737 bytes_retransmit=9 bytes_invalid=0 send_seq=41289 receive_seq=41289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.8 mcu_temp: temp=38.4 sd_pos=403479 sysload=0.29 cputime=106.670 memavail=719176 print_time=1637.787 buffer_time=2.521 print_stall=0 extruder: target=200 temp=199.9 pwm=0.644
Stats 1634.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1776125 bytes_read=657207 bytes_retransmit=9 bytes_invalid=0 send_seq=41328 receive_seq=41328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=44.6 mcu_temp: temp=38.6 sd_pos=403877 sysload=0.29 cputime=106.742 memavail=718924 print_time=1638.735 buffer_time=2.467 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 1635.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1778022 bytes_read=657691 bytes_retransmit=9 bytes_invalid=0 send_seq=41367 receive_seq=41367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.7 mcu_temp: temp=38.4 sd_pos=404287 sysload=0.29 cputime=106.809 memavail=718932 print_time=1639.716 buffer_time=2.448 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 1636.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1779930 bytes_read=658203 bytes_retransmit=9 bytes_invalid=0 send_seq=41407 receive_seq=41407 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.454 raspberry_pi: temp=44.4 mcu_temp: temp=38.5 sd_pos=404791 sysload=0.29 cputime=106.878 memavail=718976 print_time=1640.632 buffer_time=2.364 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 1637.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1782450 bytes_read=658747 bytes_retransmit=9 bytes_invalid=0 send_seq=41456 receive_seq=41456 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=405340 sysload=0.35 cputime=106.948 memavail=718976 print_time=1642.231 buffer_time=2.963 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 1638.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1783152 bytes_read=659146 bytes_retransmit=9 bytes_invalid=0 send_seq=41476 receive_seq=41476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.5 mcu_temp: temp=38.5 sd_pos=405597 sysload=0.35 cputime=107.011 memavail=718976 print_time=1642.419 buffer_time=2.149 print_stall=0 extruder: target=200 temp=200.1 pwm=0.623
Stats 1639.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1785669 bytes_read=659698 bytes_retransmit=9 bytes_invalid=0 send_seq=41524 receive_seq=41524 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.7 mcu_temp: temp=38.5 sd_pos=406306 sysload=0.35 cputime=107.089 memavail=718744 print_time=1643.823 buffer_time=2.552 print_stall=0 extruder: target=200 temp=200.1 pwm=0.623
Stats 1640.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1787203 bytes_read=660147 bytes_retransmit=9 bytes_invalid=0 send_seq=41557 receive_seq=41557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=406706 sysload=0.35 cputime=107.155 memavail=718500 print_time=1644.735 buffer_time=2.463 print_stall=0 extruder: target=200 temp=200.1 pwm=0.623
Stats 1641.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1790110 bytes_read=660736 bytes_retransmit=9 bytes_invalid=0 send_seq=41615 receive_seq=41615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.8 mcu_temp: temp=38.6 sd_pos=407849 sysload=0.35 cputime=107.231 memavail=719004 print_time=1645.949 buffer_time=2.677 print_stall=0 extruder: target=200 temp=200.0 pwm=0.685
Stats 1642.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1791144 bytes_read=661188 bytes_retransmit=9 bytes_invalid=0 send_seq=41640 receive_seq=41640 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=44.2 mcu_temp: temp=38.5 sd_pos=407939 sysload=0.40 cputime=107.294 memavail=719284 print_time=1646.648 buffer_time=2.376 print_stall=0 extruder: target=200 temp=200.0 pwm=0.685
Stats 1643.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1792623 bytes_read=661642 bytes_retransmit=9 bytes_invalid=0 send_seq=41674 receive_seq=41674 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.0 mcu_temp: temp=38.5 sd_pos=408269 sysload=0.40 cputime=107.358 memavail=719288 print_time=1647.570 buffer_time=2.297 print_stall=0 extruder: target=200 temp=200.0 pwm=0.685
Stats 1644.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1794917 bytes_read=662171 bytes_retransmit=9 bytes_invalid=0 send_seq=41720 receive_seq=41720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.459 raspberry_pi: temp=43.5 mcu_temp: temp=38.6 sd_pos=408892 sysload=0.40 cputime=107.427 memavail=719048 print_time=1648.665 buffer_time=2.391 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 1645.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1796634 bytes_read=662668 bytes_retransmit=9 bytes_invalid=0 send_seq=41757 receive_seq=41757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.0 mcu_temp: temp=38.4 sd_pos=409362 sysload=0.40 cputime=107.493 memavail=719308 print_time=1649.744 buffer_time=2.468 print_stall=0 extruder: target=200 temp=199.8 pwm=0.700
Stats 1646.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=1797730 bytes_read=663077 bytes_retransmit=9 bytes_invalid=0 send_seq=41782 receive_seq=41782 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.9 mcu_temp: temp=38.5 sd_pos=409626 sysload=0.40 cputime=107.554 memavail=719056 print_time=1651.159 buffer_time=2.882 print_stall=0 extruder: target=200 temp=199.8 pwm=0.700
Stats 1647.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1798553 bytes_read=663501 bytes_retransmit=9 bytes_invalid=0 send_seq=41804 receive_seq=41804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.324 raspberry_pi: temp=44.2 mcu_temp: temp=38.5 sd_pos=409854 sysload=0.45 cputime=107.617 memavail=719056 print_time=1651.564 buffer_time=2.287 print_stall=0 extruder: target=200 temp=199.8 pwm=0.700
Stats 1648.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1799683 bytes_read=663943 bytes_retransmit=9 bytes_invalid=0 send_seq=41830 receive_seq=41830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=410110 sysload=0.45 cputime=107.679 memavail=719056 print_time=1652.524 buffer_time=2.247 print_stall=0 extruder: target=200 temp=199.7 pwm=0.700
Stats 1649.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1801790 bytes_read=664442 bytes_retransmit=9 bytes_invalid=0 send_seq=41873 receive_seq=41873 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=43.8 mcu_temp: temp=38.5 sd_pos=410498 sysload=0.45 cputime=107.747 memavail=719056 print_time=1654.571 buffer_time=3.293 print_stall=0 extruder: target=200 temp=199.7 pwm=0.751
Stats 1650.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1801952 bytes_read=664801 bytes_retransmit=9 bytes_invalid=0 send_seq=41885 receive_seq=41885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=410498 sysload=0.45 cputime=107.805 memavail=719568 print_time=1654.571 buffer_time=2.292 print_stall=0 extruder: target=200 temp=199.7 pwm=0.751
Stats 1651.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1804188 bytes_read=665338 bytes_retransmit=9 bytes_invalid=0 send_seq=41930 receive_seq=41930 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.4 mcu_temp: temp=38.4 sd_pos=410921 sysload=0.45 cputime=107.874 memavail=719568 print_time=1655.798 buffer_time=2.518 print_stall=0 extruder: target=200 temp=199.7 pwm=0.751
Stats 1652.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1805565 bytes_read=665797 bytes_retransmit=9 bytes_invalid=0 send_seq=41962 receive_seq=41962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=411076 sysload=0.41 cputime=107.936 memavail=719584 print_time=1656.578 buffer_time=2.297 print_stall=0 extruder: target=200 temp=199.7 pwm=0.699
Stats 1653.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1807675 bytes_read=666311 bytes_retransmit=9 bytes_invalid=0 send_seq=42005 receive_seq=42005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.0 mcu_temp: temp=38.5 sd_pos=411756 sysload=0.41 cputime=108.007 memavail=719584 print_time=1657.502 buffer_time=2.221 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 1654.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1809777 bytes_read=666838 bytes_retransmit=9 bytes_invalid=0 send_seq=42048 receive_seq=42048 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.327 raspberry_pi: temp=44.0 mcu_temp: temp=38.5 sd_pos=412084 sysload=0.41 cputime=108.078 memavail=719612 print_time=1658.675 buffer_time=2.393 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 1655.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1811882 bytes_read=667337 bytes_retransmit=9 bytes_invalid=0 send_seq=42091 receive_seq=42091 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=412534 sysload=0.41 cputime=108.148 memavail=719652 print_time=1659.729 buffer_time=2.447 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 1656.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1813735 bytes_read=667841 bytes_retransmit=9 bytes_invalid=0 send_seq=42132 receive_seq=42132 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=43.9 mcu_temp: temp=38.6 sd_pos=412847 sysload=0.41 cputime=108.217 memavail=719904 print_time=1660.656 buffer_time=2.373 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 1657.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=1815580 bytes_read=668364 bytes_retransmit=9 bytes_invalid=0 send_seq=42171 receive_seq=42171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=44.0 mcu_temp: temp=38.5 sd_pos=413077 sysload=0.38 cputime=108.284 memavail=719540 print_time=1661.849 buffer_time=2.566 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 1658.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=1816585 bytes_read=668773 bytes_retransmit=9 bytes_invalid=0 send_seq=42196 receive_seq=42196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.5 mcu_temp: temp=38.6 sd_pos=413145 sysload=0.38 cputime=108.345 memavail=719800 print_time=1662.392 buffer_time=2.108 print_stall=0 extruder: target=200 temp=200.3 pwm=0.572
Stats 1659.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=1818149 bytes_read=669241 bytes_retransmit=9 bytes_invalid=0 send_seq=42230 receive_seq=42230 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.318 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=413539 sysload=0.38 cputime=108.413 memavail=719564 print_time=1663.469 buffer_time=2.185 print_stall=0 extruder: target=200 temp=200.3 pwm=0.572
Stats 1660.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=1821157 bytes_read=669831 bytes_retransmit=9 bytes_invalid=0 send_seq=42288 receive_seq=42288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=414574 sysload=0.38 cputime=108.495 memavail=719080 print_time=1664.730 buffer_time=2.445 print_stall=0 extruder: target=200 temp=200.4 pwm=0.572
Stats 1661.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=1822172 bytes_read=670236 bytes_retransmit=9 bytes_invalid=0 send_seq=42313 receive_seq=42313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.3 mcu_temp: temp=38.5 sd_pos=414664 sysload=0.38 cputime=108.558 memavail=719332 print_time=1665.426 buffer_time=2.141 print_stall=0 extruder: target=200 temp=200.4 pwm=0.572
Stats 1662.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1823612 bytes_read=670715 bytes_retransmit=9 bytes_invalid=0 send_seq=42346 receive_seq=42346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=414997 sysload=0.35 cputime=108.625 memavail=719584 print_time=1666.346 buffer_time=2.060 print_stall=0 extruder: target=200 temp=200.4 pwm=0.630
Stats 1663.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1825912 bytes_read=671257 bytes_retransmit=9 bytes_invalid=0 send_seq=42392 receive_seq=42392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.300 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=415619 sysload=0.35 cputime=108.694 memavail=719588 print_time=1667.439 buffer_time=2.153 print_stall=0 extruder: target=200 temp=200.3 pwm=0.630
Stats 1664.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1827773 bytes_read=671736 bytes_retransmit=9 bytes_invalid=0 send_seq=42431 receive_seq=42431 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.328 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=416104 sysload=0.35 cputime=108.762 memavail=719588 print_time=1668.543 buffer_time=2.255 print_stall=0 extruder: target=200 temp=200.3 pwm=0.630
Stats 1665.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1829440 bytes_read=672220 bytes_retransmit=9 bytes_invalid=0 send_seq=42468 receive_seq=42468 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.9 mcu_temp: temp=38.6 sd_pos=416612 sysload=0.35 cputime=108.833 memavail=719344 print_time=1669.486 buffer_time=2.198 print_stall=0 extruder: target=200 temp=200.1 pwm=0.689
Stats 1666.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1832036 bytes_read=672792 bytes_retransmit=9 bytes_invalid=0 send_seq=42520 receive_seq=42520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=44.4 mcu_temp: temp=38.5 sd_pos=417525 sysload=0.35 cputime=108.910 memavail=719096 print_time=1670.502 buffer_time=2.213 print_stall=0 extruder: target=200 temp=200.0 pwm=0.689
Stats 1667.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1834007 bytes_read=673296 bytes_retransmit=9 bytes_invalid=0 send_seq=42561 receive_seq=42561 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=417929 sysload=0.32 cputime=108.978 memavail=718596 print_time=1672.618 buffer_time=3.329 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 1668.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1834205 bytes_read=673655 bytes_retransmit=9 bytes_invalid=0 send_seq=42573 receive_seq=42573 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=417929 sysload=0.32 cputime=109.036 memavail=718596 print_time=1672.618 buffer_time=2.328 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 1669.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1836056 bytes_read=674162 bytes_retransmit=9 bytes_invalid=0 send_seq=42612 receive_seq=42612 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=44.1 mcu_temp: temp=38.4 sd_pos=418409 sysload=0.32 cputime=109.104 memavail=718344 print_time=1673.983 buffer_time=2.692 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 1670.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1836880 bytes_read=674556 bytes_retransmit=9 bytes_invalid=0 send_seq=42634 receive_seq=42634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=418637 sysload=0.32 cputime=109.165 memavail=718100 print_time=1674.365 buffer_time=2.074 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 1671.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1838326 bytes_read=675010 bytes_retransmit=9 bytes_invalid=0 send_seq=42665 receive_seq=42665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=418797 sysload=0.32 cputime=109.232 memavail=718100 print_time=1676.034 buffer_time=2.742 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 1672.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1839653 bytes_read=675497 bytes_retransmit=9 bytes_invalid=0 send_seq=42697 receive_seq=42697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=419117 sysload=0.29 cputime=109.299 memavail=718604 print_time=1676.613 buffer_time=2.321 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 1673.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1841552 bytes_read=675921 bytes_retransmit=9 bytes_invalid=0 send_seq=42737 receive_seq=42725 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=162 upcoming_bytes=149 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.2 mcu_temp: temp=38.5 sd_pos=419555 sysload=0.29 cputime=109.367 memavail=718628 print_time=1677.856 buffer_time=2.558 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1674.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1843237 bytes_read=676486 bytes_retransmit=9 bytes_invalid=0 send_seq=42776 receive_seq=42776 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=43.7 mcu_temp: temp=38.5 sd_pos=419913 sysload=0.29 cputime=109.437 memavail=718884 print_time=1678.300 buffer_time=2.001 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1675.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1845065 bytes_read=676988 bytes_retransmit=9 bytes_invalid=0 send_seq=42814 receive_seq=42814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.2 mcu_temp: temp=38.5 sd_pos=420221 sysload=0.29 cputime=109.511 memavail=719136 print_time=1679.363 buffer_time=2.063 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1676.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1847894 bytes_read=677552 bytes_retransmit=9 bytes_invalid=0 send_seq=42870 receive_seq=42870 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.440 raspberry_pi: temp=44.3 mcu_temp: temp=38.5 sd_pos=420693 sysload=0.29 cputime=109.590 memavail=719676 print_time=1680.646 buffer_time=2.345 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1677.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1849708 bytes_read=678056 bytes_retransmit=9 bytes_invalid=0 send_seq=42908 receive_seq=42908 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=421094 sysload=0.27 cputime=109.665 memavail=719712 print_time=1681.638 buffer_time=2.337 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1678.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1851060 bytes_read=678518 bytes_retransmit=9 bytes_invalid=0 send_seq=42938 receive_seq=42938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=43.9 mcu_temp: temp=38.6 sd_pos=421264 sysload=0.27 cputime=109.737 memavail=719712 print_time=1682.310 buffer_time=2.008 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
Stats 1679.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1853798 bytes_read=679067 bytes_retransmit=9 bytes_invalid=0 send_seq=42991 receive_seq=42991 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=421693 sysload=0.27 cputime=109.811 memavail=719712 print_time=1684.257 buffer_time=2.955 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
Stats 1680.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1854836 bytes_read=679496 bytes_retransmit=9 bytes_invalid=0 send_seq=43017 receive_seq=43017 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.310 raspberry_pi: temp=43.7 mcu_temp: temp=38.5 sd_pos=422052 sysload=0.27 cputime=109.882 memavail=719964 print_time=1684.658 buffer_time=2.354 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
Stats 1681.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1856311 bytes_read=679973 bytes_retransmit=9 bytes_invalid=0 send_seq=43050 receive_seq=43050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=44.3 mcu_temp: temp=38.5 sd_pos=422373 sysload=0.27 cputime=109.956 memavail=719728 print_time=1685.354 buffer_time=2.051 print_stall=0 extruder: target=200 temp=200.1 pwm=0.624
Stats 1682.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1858165 bytes_read=680458 bytes_retransmit=9 bytes_invalid=0 send_seq=43087 receive_seq=43087 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=422819 sysload=0.25 cputime=110.028 memavail=719488 print_time=1686.476 buffer_time=2.172 print_stall=0 extruder: target=200 temp=200.1 pwm=0.624
Stats 1683.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1859858 bytes_read=680937 bytes_retransmit=9 bytes_invalid=0 send_seq=43123 receive_seq=43123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=423330 sysload=0.25 cputime=110.104 memavail=719688 print_time=1687.452 buffer_time=2.147 print_stall=0 extruder: target=200 temp=200.2 pwm=0.624
Stats 1684.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1862499 bytes_read=681504 bytes_retransmit=9 bytes_invalid=0 send_seq=43174 receive_seq=43174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=43.8 mcu_temp: temp=38.5 sd_pos=424384 sysload=0.25 cputime=110.181 memavail=719488 print_time=1688.544 buffer_time=2.239 print_stall=0 extruder: target=200 temp=200.2 pwm=0.624
Stats 1685.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1864823 bytes_read=682026 bytes_retransmit=9 bytes_invalid=0 send_seq=43223 receive_seq=43223 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.0 mcu_temp: temp=38.4 sd_pos=424897 sysload=0.25 cputime=110.257 memavail=719500 print_time=1690.134 buffer_time=2.828 print_stall=0 extruder: target=200 temp=200.3 pwm=0.614
Stats 1686.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=1865950 bytes_read=682450 bytes_retransmit=9 bytes_invalid=0 send_seq=43250 receive_seq=43250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=425285 sysload=0.25 cputime=110.329 memavail=719008 print_time=1690.552 buffer_time=2.245 print_stall=0 extruder: target=200 temp=200.2 pwm=0.669
Stats 1687.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1867900 bytes_read=682972 bytes_retransmit=9 bytes_invalid=0 send_seq=43289 receive_seq=43289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.9 mcu_temp: temp=38.5 sd_pos=425911 sysload=0.23 cputime=110.401 memavail=719008 print_time=1691.369 buffer_time=2.061 print_stall=0 extruder: target=200 temp=200.2 pwm=0.669
Stats 1688.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1869852 bytes_read=683451 bytes_retransmit=9 bytes_invalid=0 send_seq=43328 receive_seq=43328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=426283 sysload=0.23 cputime=110.474 memavail=719008 print_time=1693.489 buffer_time=3.180 print_stall=0 extruder: target=200 temp=200.1 pwm=0.669
Stats 1689.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1869998 bytes_read=683819 bytes_retransmit=9 bytes_invalid=0 send_seq=43339 receive_seq=43339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.0 mcu_temp: temp=38.5 sd_pos=426283 sysload=0.23 cputime=110.536 memavail=719012 print_time=1693.489 buffer_time=2.180 print_stall=0 extruder: target=200 temp=200.2 pwm=0.669
Stats 1690.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1871836 bytes_read=684317 bytes_retransmit=9 bytes_invalid=0 send_seq=43379 receive_seq=43379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=44.2 mcu_temp: temp=38.4 sd_pos=426766 sysload=0.23 cputime=110.612 memavail=719292 print_time=1694.863 buffer_time=2.553 print_stall=0 extruder: target=200 temp=200.1 pwm=0.657
Stats 1691.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1873887 bytes_read=684806 bytes_retransmit=9 bytes_invalid=0 send_seq=43420 receive_seq=43420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=44.3 mcu_temp: temp=38.5 sd_pos=427145 sysload=0.23 cputime=110.686 memavail=719292 print_time=1696.916 buffer_time=3.605 print_stall=0 extruder: target=200 temp=200.1 pwm=0.657
Stats 1692.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1874071 bytes_read=685184 bytes_retransmit=9 bytes_invalid=0 send_seq=43430 receive_seq=43430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996662 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=427145 sysload=0.21 cputime=110.750 memavail=720008 print_time=1696.916 buffer_time=2.604 print_stall=0 extruder: target=200 temp=200.0 pwm=0.657
Stats 1693.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1875408 bytes_read=685637 bytes_retransmit=9 bytes_invalid=0 send_seq=43461 receive_seq=43461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996656 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=44.3 mcu_temp: temp=38.7 sd_pos=427389 sysload=0.21 cputime=110.817 memavail=720260 print_time=1697.493 buffer_time=2.180 print_stall=0 extruder: target=200 temp=200.0 pwm=0.657
Stats 1694.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1877524 bytes_read=686131 bytes_retransmit=9 bytes_invalid=0 send_seq=43503 receive_seq=43503 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996648 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=427737 sysload=0.21 cputime=110.888 memavail=720512 print_time=1698.756 buffer_time=2.443 print_stall=0 extruder: target=200 temp=200.1 pwm=0.657
Stats 1695.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1878798 bytes_read=686594 bytes_retransmit=9 bytes_invalid=0 send_seq=43533 receive_seq=43533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996641 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=44.9 mcu_temp: temp=38.5 sd_pos=427974 sysload=0.21 cputime=110.959 memavail=720824 print_time=1699.409 buffer_time=2.095 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 1696.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1881858 bytes_read=687187 bytes_retransmit=9 bytes_invalid=0 send_seq=43592 receive_seq=43592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996635 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=45.0 mcu_temp: temp=38.6 sd_pos=428673 sysload=0.21 cputime=111.041 memavail=721356 print_time=1700.941 buffer_time=2.627 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 1697.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1883220 bytes_read=687641 bytes_retransmit=9 bytes_invalid=0 send_seq=43623 receive_seq=43623 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=429033 sysload=0.19 cputime=111.111 memavail=721132 print_time=1701.367 buffer_time=2.052 print_stall=0 extruder: target=200 temp=199.9 pwm=0.715
Stats 1698.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1885077 bytes_read=688144 bytes_retransmit=9 bytes_invalid=0 send_seq=43661 receive_seq=43661 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=429490 sysload=0.19 cputime=111.188 memavail=721132 print_time=1702.378 buffer_time=2.062 print_stall=0 extruder: target=200 temp=199.9 pwm=0.650
Stats 1699.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1886875 bytes_read=688622 bytes_retransmit=9 bytes_invalid=0 send_seq=43697 receive_seq=43697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=44.3 mcu_temp: temp=38.5 sd_pos=429747 sysload=0.19 cputime=111.257 memavail=721276 print_time=1703.541 buffer_time=2.223 print_stall=0 extruder: target=200 temp=199.8 pwm=0.650
Stats 1700.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1889292 bytes_read=689141 bytes_retransmit=9 bytes_invalid=0 send_seq=43744 receive_seq=43744 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=430311 sysload=0.19 cputime=111.332 memavail=721276 print_time=1705.154 buffer_time=2.836 print_stall=0 extruder: target=200 temp=199.8 pwm=0.701
Stats 1701.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1890481 bytes_read=689584 bytes_retransmit=9 bytes_invalid=0 send_seq=43770 receive_seq=43770 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.4 mcu_temp: temp=38.6 sd_pos=430777 sysload=0.19 cputime=111.409 memavail=721548 print_time=1705.532 buffer_time=2.213 print_stall=0 extruder: target=200 temp=199.9 pwm=0.701
Stats 1702.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1892453 bytes_read=690103 bytes_retransmit=9 bytes_invalid=0 send_seq=43811 receive_seq=43811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=45.2 mcu_temp: temp=38.5 sd_pos=431457 sysload=0.18 cputime=111.488 memavail=721556 print_time=1706.329 buffer_time=2.011 print_stall=0 extruder: target=200 temp=199.8 pwm=0.701
Stats 1703.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1894727 bytes_read=690607 bytes_retransmit=9 bytes_invalid=0 send_seq=43855 receive_seq=43855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.8 mcu_temp: temp=38.7 sd_pos=432009 sysload=0.18 cputime=111.561 memavail=721556 print_time=1707.915 buffer_time=2.596 print_stall=0 extruder: target=200 temp=199.9 pwm=0.701
Stats 1704.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1895942 bytes_read=691060 bytes_retransmit=9 bytes_invalid=0 send_seq=43883 receive_seq=43883 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.5 mcu_temp: temp=38.5 sd_pos=432395 sysload=0.18 cputime=111.629 memavail=721560 print_time=1708.344 buffer_time=2.024 print_stall=0 extruder: target=200 temp=199.9 pwm=0.672
Stats 1705.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1898878 bytes_read=691643 bytes_retransmit=9 bytes_invalid=0 send_seq=43940 receive_seq=43940 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=44.3 mcu_temp: temp=38.4 sd_pos=433249 sysload=0.18 cputime=111.709 memavail=721816 print_time=1709.979 buffer_time=2.659 print_stall=0 extruder: target=200 temp=199.9 pwm=0.672
Stats 1706.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=1900332 bytes_read=692082 bytes_retransmit=9 bytes_invalid=0 send_seq=43971 receive_seq=43971 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=433577 sysload=0.18 cputime=111.785 memavail=721780 print_time=1710.894 buffer_time=2.573 print_stall=0 extruder: target=200 temp=200.0 pwm=0.618
Stats 1707.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1901396 bytes_read=692535 bytes_retransmit=9 bytes_invalid=0 send_seq=43996 receive_seq=43996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.309 raspberry_pi: temp=44.3 mcu_temp: temp=38.7 sd_pos=434159 sysload=0.16 cputime=111.859 memavail=721408 print_time=1711.318 buffer_time=1.995 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 1708.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1903729 bytes_read=693063 bytes_retransmit=9 bytes_invalid=0 send_seq=44042 receive_seq=44042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.443 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=434614 sysload=0.16 cputime=111.933 memavail=720904 print_time=1712.393 buffer_time=2.069 print_stall=0 extruder: target=200 temp=200.2 pwm=0.618
Stats 1709.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1905571 bytes_read=693537 bytes_retransmit=9 bytes_invalid=0 send_seq=44080 receive_seq=44080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=434953 sysload=0.16 cputime=112.008 memavail=720652 print_time=1714.521 buffer_time=3.196 print_stall=0 extruder: target=200 temp=200.2 pwm=0.618
Stats 1710.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1905772 bytes_read=693898 bytes_retransmit=9 bytes_invalid=0 send_seq=44090 receive_seq=44090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.8 mcu_temp: temp=38.5 sd_pos=434953 sysload=0.16 cputime=112.072 memavail=721168 print_time=1714.521 buffer_time=2.195 print_stall=0 extruder: target=200 temp=200.2 pwm=0.634
Stats 1711.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1907575 bytes_read=694370 bytes_retransmit=9 bytes_invalid=0 send_seq=44127 receive_seq=44127 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=435439 sysload=0.16 cputime=112.146 memavail=721188 print_time=1715.896 buffer_time=2.570 print_stall=0 extruder: target=200 temp=200.2 pwm=0.634
Stats 1712.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1909646 bytes_read=694874 bytes_retransmit=9 bytes_invalid=0 send_seq=44169 receive_seq=44169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.340 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=435819 sysload=0.15 cputime=112.222 memavail=720952 print_time=1717.954 buffer_time=3.627 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 1713.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1909846 bytes_read=695237 bytes_retransmit=9 bytes_invalid=0 send_seq=44179 receive_seq=44179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=435819 sysload=0.15 cputime=112.281 memavail=720488 print_time=1717.954 buffer_time=2.626 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 1714.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1911046 bytes_read=695670 bytes_retransmit=9 bytes_invalid=0 send_seq=44206 receive_seq=44206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=436064 sysload=0.15 cputime=112.345 memavail=720492 print_time=1718.500 buffer_time=2.172 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 1715.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1913116 bytes_read=696164 bytes_retransmit=9 bytes_invalid=0 send_seq=44248 receive_seq=44248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=436417 sysload=0.15 cputime=112.417 memavail=719988 print_time=1719.763 buffer_time=2.434 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 1716.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1914413 bytes_read=696617 bytes_retransmit=9 bytes_invalid=0 send_seq=44276 receive_seq=44276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.1 mcu_temp: temp=38.6 sd_pos=436656 sysload=0.15 cputime=112.483 memavail=719484 print_time=1720.424 buffer_time=2.095 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 1717.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1917228 bytes_read=697200 bytes_retransmit=9 bytes_invalid=0 send_seq=44330 receive_seq=44330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=437351 sysload=0.14 cputime=112.560 memavail=719776 print_time=1721.894 buffer_time=2.564 print_stall=0 extruder: target=200 temp=199.9 pwm=0.716
Stats 1718.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1919115 bytes_read=697679 bytes_retransmit=9 bytes_invalid=0 send_seq=44369 receive_seq=44369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=43.8 mcu_temp: temp=38.5 sd_pos=437894 sysload=0.14 cputime=112.630 memavail=720028 print_time=1722.664 buffer_time=2.334 print_stall=0 extruder: target=200 temp=199.8 pwm=0.716
Stats 1719.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1920889 bytes_read=698167 bytes_retransmit=9 bytes_invalid=0 send_seq=44404 receive_seq=44404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.7 mcu_temp: temp=38.7 sd_pos=438241 sysload=0.14 cputime=112.697 memavail=719276 print_time=1723.898 buffer_time=2.568 print_stall=0 extruder: target=200 temp=199.8 pwm=0.716
Stats 1720.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1921987 bytes_read=698590 bytes_retransmit=9 bytes_invalid=0 send_seq=44429 receive_seq=44429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=438487 sysload=0.14 cputime=112.761 memavail=719024 print_time=1724.511 buffer_time=2.181 print_stall=0 extruder: target=200 temp=199.7 pwm=0.716
Stats 1721.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1924008 bytes_read=699074 bytes_retransmit=9 bytes_invalid=0 send_seq=44469 receive_seq=44469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=438649 sysload=0.14 cputime=112.829 memavail=719052 print_time=1725.878 buffer_time=2.546 print_stall=0 extruder: target=200 temp=199.6 pwm=0.713
Stats 1722.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1925856 bytes_read=699597 bytes_retransmit=9 bytes_invalid=0 send_seq=44508 receive_seq=44508 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=439132 sysload=0.13 cputime=112.903 memavail=718812 print_time=1727.059 buffer_time=2.727 print_stall=0 extruder: target=200 temp=199.7 pwm=0.713
Stats 1723.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1927052 bytes_read=700030 bytes_retransmit=9 bytes_invalid=0 send_seq=44535 receive_seq=44535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.7 mcu_temp: temp=38.6 sd_pos=439546 sysload=0.13 cputime=112.968 memavail=718560 print_time=1727.499 buffer_time=2.165 print_stall=0 extruder: target=200 temp=199.7 pwm=0.713
Stats 1724.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1929125 bytes_read=700529 bytes_retransmit=9 bytes_invalid=0 send_seq=44578 receive_seq=44578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=440254 sysload=0.13 cputime=113.038 memavail=718812 print_time=1728.428 buffer_time=2.094 print_stall=0 extruder: target=200 temp=199.8 pwm=0.662
Stats 1725.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1931406 bytes_read=701072 bytes_retransmit=9 bytes_invalid=0 send_seq=44624 receive_seq=44624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=440708 sysload=0.13 cputime=113.108 memavail=718812 print_time=1730.064 buffer_time=2.729 print_stall=0 extruder: target=200 temp=199.8 pwm=0.662
Stats 1726.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1932451 bytes_read=701490 bytes_retransmit=9 bytes_invalid=0 send_seq=44648 receive_seq=44648 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=441066 sysload=0.13 cputime=113.172 memavail=718320 print_time=1730.491 buffer_time=2.156 print_stall=0 extruder: target=200 temp=200.0 pwm=0.662
Stats 1727.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1934791 bytes_read=702019 bytes_retransmit=9 bytes_invalid=0 send_seq=44694 receive_seq=44694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.5 mcu_temp: temp=38.8 sd_pos=441742 sysload=0.20 cputime=113.246 memavail=718636 print_time=1731.571 buffer_time=2.234 print_stall=0 extruder: target=200 temp=200.1 pwm=0.662
Stats 1728.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1937106 bytes_read=702562 bytes_retransmit=9 bytes_invalid=0 send_seq=44740 receive_seq=44740 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=442289 sysload=0.20 cputime=113.318 memavail=717896 print_time=1733.213 buffer_time=2.877 print_stall=0 extruder: target=200 temp=200.1 pwm=0.646
Stats 1729.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1938335 bytes_read=702995 bytes_retransmit=9 bytes_invalid=0 send_seq=44767 receive_seq=44767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=442743 sysload=0.20 cputime=113.386 memavail=717896 print_time=1733.628 buffer_time=2.291 print_stall=0 extruder: target=200 temp=200.2 pwm=0.646
Stats 1730.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1940442 bytes_read=703484 bytes_retransmit=9 bytes_invalid=0 send_seq=44808 receive_seq=44808 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=443472 sysload=0.20 cputime=113.458 memavail=717896 print_time=1734.450 buffer_time=2.112 print_stall=0 extruder: target=200 temp=200.3 pwm=0.646
Stats 1731.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1942370 bytes_read=703992 bytes_retransmit=9 bytes_invalid=0 send_seq=44847 receive_seq=44847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=443814 sysload=0.20 cputime=113.533 memavail=718212 print_time=1736.535 buffer_time=3.195 print_stall=0 extruder: target=200 temp=200.4 pwm=0.573
Stats 1732.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1942538 bytes_read=704360 bytes_retransmit=9 bytes_invalid=0 send_seq=44858 receive_seq=44858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.7 mcu_temp: temp=38.6 sd_pos=443814 sysload=0.26 cputime=113.594 memavail=718212 print_time=1736.535 buffer_time=2.195 print_stall=0 extruder: target=200 temp=200.4 pwm=0.573
Stats 1733.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1944345 bytes_read=704834 bytes_retransmit=9 bytes_invalid=0 send_seq=44896 receive_seq=44896 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.1 pwm=0.314 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=444264 sysload=0.26 cputime=113.663 memavail=718220 print_time=1737.897 buffer_time=2.555 print_stall=0 extruder: target=200 temp=200.4 pwm=0.624
Stats 1734.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1946413 bytes_read=705362 bytes_retransmit=9 bytes_invalid=0 send_seq=44939 receive_seq=44939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=444651 sysload=0.26 cputime=113.735 memavail=718220 print_time=1739.966 buffer_time=3.624 print_stall=0 extruder: target=200 temp=200.3 pwm=0.624
Stats 1735.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1946644 bytes_read=705731 bytes_retransmit=9 bytes_invalid=0 send_seq=44951 receive_seq=44951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996646 heater_bed: target=60 temp=60.1 pwm=0.305 raspberry_pi: temp=43.8 mcu_temp: temp=38.5 sd_pos=444651 sysload=0.26 cputime=113.798 memavail=717720 print_time=1739.966 buffer_time=2.624 print_stall=0 extruder: target=200 temp=200.2 pwm=0.678
Stats 1736.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1947820 bytes_read=706142 bytes_retransmit=9 bytes_invalid=0 send_seq=44978 receive_seq=44978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996641 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=444863 sysload=0.26 cputime=113.862 memavail=717720 print_time=1740.490 buffer_time=2.147 print_stall=0 extruder: target=200 temp=200.2 pwm=0.678
Stats 1737.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1949885 bytes_read=706663 bytes_retransmit=9 bytes_invalid=0 send_seq=45019 receive_seq=45019 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996635 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=445219 sysload=0.32 cputime=113.935 memavail=718268 print_time=1741.754 buffer_time=2.410 print_stall=0 extruder: target=200 temp=200.1 pwm=0.678
Stats 1738.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1951270 bytes_read=707116 bytes_retransmit=9 bytes_invalid=0 send_seq=45050 receive_seq=45050 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.1 pwm=0.346 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=445459 sysload=0.32 cputime=114.000 memavail=718016 print_time=1742.466 buffer_time=2.122 print_stall=0 extruder: target=200 temp=200.0 pwm=0.678
Stats 1739.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1954048 bytes_read=707665 bytes_retransmit=9 bytes_invalid=0 send_seq=45103 receive_seq=45103 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.1 pwm=0.313 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=446194 sysload=0.32 cputime=114.075 memavail=717792 print_time=1743.889 buffer_time=2.543 print_stall=0 extruder: target=200 temp=199.9 pwm=0.729
Stats 1740.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1955945 bytes_read=708178 bytes_retransmit=9 bytes_invalid=0 send_seq=45143 receive_seq=45143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=446838 sysload=0.32 cputime=114.150 memavail=717540 print_time=1744.649 buffer_time=2.303 print_stall=0 extruder: target=200 temp=199.9 pwm=0.729
Stats 1741.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1957164 bytes_read=708616 bytes_retransmit=9 bytes_invalid=0 send_seq=45171 receive_seq=45171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.1 pwm=0.367 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=447067 sysload=0.32 cputime=114.221 memavail=717288 print_time=1745.397 buffer_time=2.049 print_stall=0 extruder: target=200 temp=199.9 pwm=0.729
Stats 1742.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1959318 bytes_read=709126 bytes_retransmit=9 bytes_invalid=0 send_seq=45213 receive_seq=45213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=447376 sysload=0.46 cputime=114.290 memavail=718308 print_time=1746.812 buffer_time=2.464 print_stall=0 extruder: target=200 temp=199.8 pwm=0.664
Stats 1743.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1961125 bytes_read=709643 bytes_retransmit=9 bytes_invalid=0 send_seq=45251 receive_seq=45251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=447826 sysload=0.46 cputime=114.359 memavail=718088 print_time=1747.966 buffer_time=2.617 print_stall=0 extruder: target=200 temp=199.9 pwm=0.664
Stats 1744.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1962355 bytes_read=710062 bytes_retransmit=9 bytes_invalid=0 send_seq=45278 receive_seq=45278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.7 mcu_temp: temp=38.6 sd_pos=448314 sysload=0.46 cputime=114.426 memavail=718340 print_time=1748.379 buffer_time=2.029 print_stall=0 extruder: target=200 temp=200.0 pwm=0.664
Stats 1745.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1965252 bytes_read=710626 bytes_retransmit=9 bytes_invalid=0 send_seq=45334 receive_seq=45334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=449256 sysload=0.46 cputime=114.500 memavail=718604 print_time=1749.944 buffer_time=2.592 print_stall=0 extruder: target=200 temp=200.0 pwm=0.664
Stats 1746.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=1966826 bytes_read=711128 bytes_retransmit=9 bytes_invalid=0 send_seq=45369 receive_seq=45369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=449716 sysload=0.46 cputime=114.575 memavail=718504 print_time=1750.869 buffer_time=2.517 print_stall=0 extruder: target=200 temp=200.1 pwm=0.603
Stats 1747.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1970012 bytes_read=711727 bytes_retransmit=9 bytes_invalid=0 send_seq=45429 receive_seq=45429 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=450888 sysload=0.50 cputime=114.654 memavail=718536 print_time=1752.260 buffer_time=2.907 print_stall=0 extruder: target=200 temp=200.2 pwm=0.603
Stats 1748.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1971059 bytes_read=712131 bytes_retransmit=9 bytes_invalid=0 send_seq=45453 receive_seq=45453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.441 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=451008 sysload=0.50 cputime=114.717 memavail=718536 print_time=1752.975 buffer_time=2.621 print_stall=0 extruder: target=200 temp=200.2 pwm=0.603
Stats 1749.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1972554 bytes_read=712613 bytes_retransmit=9 bytes_invalid=0 send_seq=45484 receive_seq=45484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996663 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=44.5 mcu_temp: temp=38.5 sd_pos=451401 sysload=0.50 cputime=114.788 memavail=719320 print_time=1753.914 buffer_time=2.559 print_stall=0 extruder: target=200 temp=200.2 pwm=0.603
Stats 1750.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1973809 bytes_read=713037 bytes_retransmit=9 bytes_invalid=0 send_seq=45512 receive_seq=45512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996667 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=451756 sysload=0.50 cputime=114.853 memavail=719520 print_time=1754.397 buffer_time=2.041 print_stall=0 extruder: target=200 temp=200.2 pwm=0.640
Stats 1751.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1975909 bytes_read=713536 bytes_retransmit=9 bytes_invalid=0 send_seq=45555 receive_seq=45555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996659 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.4 mcu_temp: temp=38.6 sd_pos=452378 sysload=0.50 cputime=114.922 memavail=719576 print_time=1755.395 buffer_time=2.038 print_stall=0 extruder: target=200 temp=200.2 pwm=0.640
Stats 1752.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1977852 bytes_read=714073 bytes_retransmit=9 bytes_invalid=0 send_seq=45594 receive_seq=45594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996649 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=452810 sysload=0.54 cputime=114.993 memavail=719076 print_time=1757.535 buffer_time=3.177 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 1753.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1978009 bytes_read=714407 bytes_retransmit=9 bytes_invalid=0 send_seq=45604 receive_seq=45604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996642 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=452810 sysload=0.54 cputime=115.053 memavail=719328 print_time=1757.535 buffer_time=2.176 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 1754.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1979860 bytes_read=714891 bytes_retransmit=9 bytes_invalid=0 send_seq=45641 receive_seq=45641 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=453331 sysload=0.54 cputime=115.121 memavail=719352 print_time=1758.902 buffer_time=2.542 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 1755.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1981907 bytes_read=715413 bytes_retransmit=9 bytes_invalid=0 send_seq=45683 receive_seq=45683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.307 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=453682 sysload=0.54 cputime=115.191 memavail=720116 print_time=1760.964 buffer_time=3.603 print_stall=0 extruder: target=200 temp=199.9 pwm=0.735
Stats 1756.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1982115 bytes_read=715752 bytes_retransmit=9 bytes_invalid=0 send_seq=45694 receive_seq=45694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=453682 sysload=0.54 cputime=115.250 memavail=720368 print_time=1760.964 buffer_time=2.603 print_stall=0 extruder: target=200 temp=199.9 pwm=0.735
Stats 1757.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1983269 bytes_read=716206 bytes_retransmit=9 bytes_invalid=0 send_seq=45722 receive_seq=45722 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=453891 sysload=0.66 cputime=115.316 memavail=719056 print_time=1761.474 buffer_time=2.113 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 1758.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1985335 bytes_read=716723 bytes_retransmit=9 bytes_invalid=0 send_seq=45763 receive_seq=45763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=44.4 mcu_temp: temp=38.7 sd_pos=454245 sysload=0.66 cputime=115.386 memavail=719328 print_time=1762.738 buffer_time=2.376 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 1759.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1986719 bytes_read=717162 bytes_retransmit=9 bytes_invalid=0 send_seq=45794 receive_seq=45794 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.454 raspberry_pi: temp=43.7 mcu_temp: temp=38.7 sd_pos=454485 sysload=0.66 cputime=115.449 memavail=719380 print_time=1763.457 buffer_time=2.093 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 1760.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1989087 bytes_read=717696 bytes_retransmit=9 bytes_invalid=0 send_seq=45841 receive_seq=45841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=455213 sysload=0.66 cputime=115.526 memavail=719140 print_time=1764.777 buffer_time=2.412 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 1761.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1991023 bytes_read=718202 bytes_retransmit=9 bytes_invalid=0 send_seq=45880 receive_seq=45880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=455847 sysload=0.66 cputime=115.596 memavail=719160 print_time=1765.583 buffer_time=2.218 print_stall=0 extruder: target=200 temp=199.8 pwm=0.695
Stats 1762.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1993046 bytes_read=718701 bytes_retransmit=9 bytes_invalid=0 send_seq=45922 receive_seq=45922 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=456121 sysload=0.60 cputime=115.664 memavail=718916 print_time=1767.053 buffer_time=2.687 print_stall=0 extruder: target=200 temp=199.8 pwm=0.695
Stats 1763.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1994197 bytes_read=719123 bytes_retransmit=9 bytes_invalid=0 send_seq=45948 receive_seq=45948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=45.1 mcu_temp: temp=38.7 sd_pos=456253 sysload=0.60 cputime=115.732 memavail=718872 print_time=1767.739 buffer_time=2.373 print_stall=0 extruder: target=200 temp=199.8 pwm=0.695
Stats 1764.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1995989 bytes_read=719620 bytes_retransmit=9 bytes_invalid=0 send_seq=45985 receive_seq=45985 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=456766 sysload=0.60 cputime=115.801 memavail=718924 print_time=1768.893 buffer_time=2.527 print_stall=0 extruder: target=200 temp=199.9 pwm=0.695
Stats 1765.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1998969 bytes_read=720189 bytes_retransmit=9 bytes_invalid=0 send_seq=46042 receive_seq=46042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=458053 sysload=0.60 cputime=115.877 memavail=718924 print_time=1770.107 buffer_time=2.739 print_stall=0 extruder: target=200 temp=199.9 pwm=0.645
Stats 1766.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2000232 bytes_read=720633 bytes_retransmit=9 bytes_invalid=0 send_seq=46071 receive_seq=46071 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=458270 sysload=0.60 cputime=115.942 memavail=718680 print_time=1770.879 buffer_time=2.511 print_stall=0 extruder: target=200 temp=200.0 pwm=0.645
Stats 1767.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2001729 bytes_read=721115 bytes_retransmit=9 bytes_invalid=0 send_seq=46102 receive_seq=46102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=45.0 mcu_temp: temp=38.8 sd_pos=458698 sysload=0.56 cputime=116.008 memavail=718272 print_time=1771.803 buffer_time=2.435 print_stall=0 extruder: target=200 temp=200.1 pwm=0.645
Stats 1768.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2004853 bytes_read=721694 bytes_retransmit=9 bytes_invalid=0 send_seq=46161 receive_seq=46161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.423 raspberry_pi: temp=44.9 mcu_temp: temp=38.6 sd_pos=459805 sysload=0.56 cputime=116.082 memavail=718284 print_time=1773.210 buffer_time=2.840 print_stall=0 extruder: target=200 temp=200.2 pwm=0.594
Stats 1769.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2005886 bytes_read=722123 bytes_retransmit=9 bytes_invalid=0 send_seq=46187 receive_seq=46187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=459924 sysload=0.56 cputime=116.145 memavail=718284 print_time=1773.922 buffer_time=2.551 print_stall=0 extruder: target=200 temp=200.2 pwm=0.594
Stats 1770.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2007342 bytes_read=722590 bytes_retransmit=9 bytes_invalid=0 send_seq=46218 receive_seq=46218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.6 mcu_temp: temp=38.7 sd_pos=460317 sysload=0.56 cputime=116.208 memavail=718060 print_time=1774.858 buffer_time=2.486 print_stall=0 extruder: target=200 temp=200.3 pwm=0.594
Stats 1771.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2010529 bytes_read=723179 bytes_retransmit=9 bytes_invalid=0 send_seq=46279 receive_seq=46279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.1 pwm=0.236 raspberry_pi: temp=44.4 mcu_temp: temp=38.7 sd_pos=461290 sysload=0.56 cputime=116.284 memavail=718060 print_time=1776.349 buffer_time=2.977 print_stall=0 extruder: target=200 temp=200.3 pwm=0.594
Stats 1772.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2011587 bytes_read=723613 bytes_retransmit=9 bytes_invalid=0 send_seq=46303 receive_seq=46303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=461428 sysload=0.51 cputime=116.349 memavail=717808 print_time=1777.092 buffer_time=2.719 print_stall=0 extruder: target=200 temp=200.3 pwm=0.594
Stats 1773.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2012699 bytes_read=724050 bytes_retransmit=9 bytes_invalid=0 send_seq=46328 receive_seq=46328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=461723 sysload=0.51 cputime=116.417 memavail=717568 print_time=1778.486 buffer_time=3.112 print_stall=0 extruder: target=200 temp=200.2 pwm=0.631
Stats 1774.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2012851 bytes_read=724384 bytes_retransmit=9 bytes_invalid=0 send_seq=46338 receive_seq=46338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=461723 sysload=0.51 cputime=116.472 memavail=717568 print_time=1778.486 buffer_time=2.111 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 1775.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2014709 bytes_read=724873 bytes_retransmit=9 bytes_invalid=0 send_seq=46376 receive_seq=46376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.348 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=462211 sysload=0.51 cputime=116.539 memavail=717568 print_time=1779.851 buffer_time=2.476 print_stall=0 extruder: target=200 temp=200.1 pwm=0.643
Stats 1776.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2016791 bytes_read=725400 bytes_retransmit=9 bytes_invalid=0 send_seq=46419 receive_seq=46419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=462562 sysload=0.51 cputime=116.610 memavail=717568 print_time=1781.916 buffer_time=3.540 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 1777.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2016956 bytes_read=725749 bytes_retransmit=9 bytes_invalid=0 send_seq=46429 receive_seq=46429 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.7 mcu_temp: temp=38.7 sd_pos=462562 sysload=0.47 cputime=116.666 memavail=717076 print_time=1781.916 buffer_time=2.540 print_stall=0 extruder: target=200 temp=199.9 pwm=0.705
Stats 1778.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2018360 bytes_read=726203 bytes_retransmit=9 bytes_invalid=0 send_seq=46460 receive_seq=46460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=462788 sysload=0.47 cputime=116.733 memavail=717364 print_time=1782.625 buffer_time=2.247 print_stall=0 extruder: target=200 temp=199.8 pwm=0.705
Stats 1779.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2020280 bytes_read=726715 bytes_retransmit=9 bytes_invalid=0 send_seq=46500 receive_seq=46500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=463161 sysload=0.47 cputime=116.799 memavail=717364 print_time=1783.750 buffer_time=2.372 print_stall=0 extruder: target=200 temp=199.8 pwm=0.705
Stats 1780.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2021578 bytes_read=727149 bytes_retransmit=9 bytes_invalid=0 send_seq=46530 receive_seq=46530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=463400 sysload=0.47 cputime=116.864 memavail=717364 print_time=1784.401 buffer_time=2.022 print_stall=0 extruder: target=200 temp=199.8 pwm=0.694
Stats 1781.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2023522 bytes_read=727643 bytes_retransmit=9 bytes_invalid=0 send_seq=46569 receive_seq=46569 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=463898 sysload=0.47 cputime=116.933 memavail=717368 print_time=1785.403 buffer_time=2.024 print_stall=0 extruder: target=200 temp=199.8 pwm=0.694
Stats 1782.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2026237 bytes_read=728225 bytes_retransmit=9 bytes_invalid=0 send_seq=46620 receive_seq=46620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=464808 sysload=0.43 cputime=117.015 memavail=717116 print_time=1786.962 buffer_time=2.583 print_stall=0 extruder: target=200 temp=199.8 pwm=0.694
Stats 1783.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2027579 bytes_read=728659 bytes_retransmit=9 bytes_invalid=0 send_seq=46650 receive_seq=46650 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.334 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=464888 sysload=0.43 cputime=117.081 memavail=717128 print_time=1787.643 buffer_time=2.263 print_stall=0 extruder: target=200 temp=199.9 pwm=0.694
Stats 1784.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2029288 bytes_read=729133 bytes_retransmit=9 bytes_invalid=0 send_seq=46685 receive_seq=46685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=465162 sysload=0.43 cputime=117.147 memavail=717128 print_time=1788.715 buffer_time=2.334 print_stall=0 extruder: target=200 temp=199.8 pwm=0.694
Stats 1785.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2030904 bytes_read=729610 bytes_retransmit=9 bytes_invalid=0 send_seq=46718 receive_seq=46718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=465591 sysload=0.43 cputime=117.211 memavail=717384 print_time=1789.790 buffer_time=2.407 print_stall=0 extruder: target=200 temp=199.9 pwm=0.694
Stats 1786.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2034064 bytes_read=730194 bytes_retransmit=9 bytes_invalid=0 send_seq=46778 receive_seq=46778 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=466767 sysload=0.43 cputime=117.288 memavail=717636 print_time=1791.082 buffer_time=2.698 print_stall=0 extruder: target=200 temp=200.0 pwm=0.613
Stats 1787.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2035100 bytes_read=730625 bytes_retransmit=9 bytes_invalid=0 send_seq=46802 receive_seq=46802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=466952 sysload=0.40 cputime=117.354 memavail=718184 print_time=1791.795 buffer_time=2.412 print_stall=0 extruder: target=200 temp=200.1 pwm=0.613
Stats 1788.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2036612 bytes_read=731085 bytes_retransmit=9 bytes_invalid=0 send_seq=46834 receive_seq=46834 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=467381 sysload=0.40 cputime=117.423 memavail=717188 print_time=1792.713 buffer_time=2.328 print_stall=0 extruder: target=200 temp=200.1 pwm=0.613
Stats 1789.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2039801 bytes_read=731658 bytes_retransmit=9 bytes_invalid=0 send_seq=46892 receive_seq=46892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.4 mcu_temp: temp=38.6 sd_pos=468489 sysload=0.40 cputime=117.496 memavail=717944 print_time=1794.130 buffer_time=2.745 print_stall=0 extruder: target=200 temp=200.2 pwm=0.613
Stats 1790.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2040881 bytes_read=732087 bytes_retransmit=9 bytes_invalid=0 send_seq=46918 receive_seq=46918 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.348 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=468642 sysload=0.40 cputime=117.558 memavail=717944 print_time=1794.840 buffer_time=2.454 print_stall=0 extruder: target=200 temp=200.2 pwm=0.594
Stats 1791.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2042302 bytes_read=732549 bytes_retransmit=9 bytes_invalid=0 send_seq=46948 receive_seq=46948 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.348 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=469001 sysload=0.40 cputime=117.626 memavail=718096 print_time=1795.770 buffer_time=2.383 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 1792.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2045448 bytes_read=733148 bytes_retransmit=9 bytes_invalid=0 send_seq=47008 receive_seq=47008 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=469972 sysload=0.36 cputime=117.697 memavail=718348 print_time=1797.258 buffer_time=2.870 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 1793.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2046461 bytes_read=733567 bytes_retransmit=9 bytes_invalid=0 send_seq=47032 receive_seq=47032 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.5 mcu_temp: temp=38.5 sd_pos=470111 sysload=0.36 cputime=117.759 memavail=718048 print_time=1798.009 buffer_time=2.620 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 1794.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2047622 bytes_read=734019 bytes_retransmit=9 bytes_invalid=0 send_seq=47060 receive_seq=47060 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.472 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=470376 sysload=0.36 cputime=117.824 memavail=718612 print_time=1799.389 buffer_time=3.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 1795.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2047811 bytes_read=734368 bytes_retransmit=9 bytes_invalid=0 send_seq=47073 receive_seq=47073 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=43.8 mcu_temp: temp=38.6 sd_pos=470376 sysload=0.36 cputime=117.880 memavail=718564 print_time=1799.389 buffer_time=1.999 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
Stats 1796.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2049592 bytes_read=734858 bytes_retransmit=9 bytes_invalid=0 send_seq=47109 receive_seq=47109 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.320 raspberry_pi: temp=43.8 mcu_temp: temp=38.7 sd_pos=470830 sysload=0.36 cputime=117.949 memavail=718872 print_time=1800.755 buffer_time=2.365 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
Stats 1797.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2051713 bytes_read=735400 bytes_retransmit=9 bytes_invalid=0 send_seq=47152 receive_seq=47152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.323 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=471179 sysload=0.34 cputime=118.017 memavail=718868 print_time=1802.829 buffer_time=3.438 print_stall=0 extruder: target=200 temp=199.9 pwm=0.676
Stats 1798.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2051870 bytes_read=735739 bytes_retransmit=9 bytes_invalid=0 send_seq=47163 receive_seq=47163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=471179 sysload=0.34 cputime=118.078 memavail=719364 print_time=1802.829 buffer_time=2.438 print_stall=0 extruder: target=200 temp=199.9 pwm=0.676
Stats 1799.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2053237 bytes_read=736198 bytes_retransmit=9 bytes_invalid=0 send_seq=47195 receive_seq=47195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=471403 sysload=0.34 cputime=118.145 memavail=719428 print_time=1803.525 buffer_time=2.134 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 1800.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2055157 bytes_read=736705 bytes_retransmit=9 bytes_invalid=0 send_seq=47234 receive_seq=47234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=471805 sysload=0.34 cputime=118.212 memavail=719184 print_time=1804.653 buffer_time=2.260 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 1801.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2057188 bytes_read=737194 bytes_retransmit=9 bytes_invalid=0 send_seq=47275 receive_seq=47275 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=43.8 mcu_temp: temp=38.5 sd_pos=472466 sysload=0.34 cputime=118.278 memavail=718948 print_time=1805.619 buffer_time=2.226 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 1802.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2059159 bytes_read=737708 bytes_retransmit=9 bytes_invalid=0 send_seq=47315 receive_seq=47315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=43.9 mcu_temp: temp=38.6 sd_pos=472967 sysload=0.31 cputime=118.348 memavail=719208 print_time=1806.791 buffer_time=2.397 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 1803.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2061228 bytes_read=738225 bytes_retransmit=9 bytes_invalid=0 send_seq=47356 receive_seq=47356 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=473471 sysload=0.31 cputime=118.420 memavail=718984 print_time=1807.835 buffer_time=2.441 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 1804.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2062335 bytes_read=738639 bytes_retransmit=9 bytes_invalid=0 send_seq=47382 receive_seq=47382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=473554 sysload=0.31 cputime=118.486 memavail=719020 print_time=1808.519 buffer_time=2.124 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 1805.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2064139 bytes_read=739118 bytes_retransmit=9 bytes_invalid=0 send_seq=47418 receive_seq=47418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=473900 sysload=0.31 cputime=118.552 memavail=719224 print_time=1809.603 buffer_time=2.207 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 1806.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2065752 bytes_read=739605 bytes_retransmit=9 bytes_invalid=0 send_seq=47453 receive_seq=47453 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.351 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=474357 sysload=0.31 cputime=118.620 memavail=719040 print_time=1810.676 buffer_time=2.280 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 1807.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2068637 bytes_read=740181 bytes_retransmit=9 bytes_invalid=0 send_seq=47508 receive_seq=47508 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.351 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=475435 sysload=0.28 cputime=118.698 memavail=719344 print_time=1811.913 buffer_time=2.516 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 1808.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2069852 bytes_read=740615 bytes_retransmit=9 bytes_invalid=0 send_seq=47535 receive_seq=47535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=475654 sysload=0.28 cputime=118.761 memavail=719092 print_time=1812.682 buffer_time=2.284 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 1809.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2071357 bytes_read=741087 bytes_retransmit=9 bytes_invalid=0 send_seq=47567 receive_seq=47567 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=476080 sysload=0.28 cputime=118.826 memavail=719120 print_time=1813.602 buffer_time=2.203 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 1810.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2074570 bytes_read=741671 bytes_retransmit=9 bytes_invalid=0 send_seq=47627 receive_seq=47627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=44.4 mcu_temp: temp=38.6 sd_pos=477186 sysload=0.28 cputime=118.901 memavail=719120 print_time=1814.991 buffer_time=2.591 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 1811.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2075660 bytes_read=742095 bytes_retransmit=9 bytes_invalid=0 send_seq=47652 receive_seq=47652 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.463 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=477373 sysload=0.28 cputime=118.966 memavail=718620 print_time=1815.727 buffer_time=2.327 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 1812.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2077103 bytes_read=742577 bytes_retransmit=9 bytes_invalid=0 send_seq=47683 receive_seq=47683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=477769 sysload=0.26 cputime=119.033 memavail=719144 print_time=1816.664 buffer_time=2.263 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 1813.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2080325 bytes_read=743151 bytes_retransmit=9 bytes_invalid=0 send_seq=47743 receive_seq=47743 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=478774 sysload=0.26 cputime=119.104 memavail=718892 print_time=1818.164 buffer_time=2.763 print_stall=0 extruder: target=200 temp=200.2 pwm=0.634
Stats 1814.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2081373 bytes_read=743573 bytes_retransmit=9 bytes_invalid=0 send_seq=47769 receive_seq=47769 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=478947 sysload=0.26 cputime=119.168 memavail=718872 print_time=1818.912 buffer_time=2.511 print_stall=0 extruder: target=200 temp=200.2 pwm=0.634
Stats 1815.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2082483 bytes_read=744015 bytes_retransmit=9 bytes_invalid=0 send_seq=47795 receive_seq=47795 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=479210 sysload=0.26 cputime=119.234 memavail=719428 print_time=1820.294 buffer_time=2.892 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 1816.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2083308 bytes_read=744409 bytes_retransmit=9 bytes_invalid=0 send_seq=47817 receive_seq=47817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=479439 sysload=0.26 cputime=119.296 memavail=718960 print_time=1820.773 buffer_time=2.370 print_stall=0 extruder: target=200 temp=200.2 pwm=0.657
Stats 1817.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2084416 bytes_read=744843 bytes_retransmit=9 bytes_invalid=0 send_seq=47841 receive_seq=47841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=479663 sysload=0.24 cputime=119.360 memavail=718708 print_time=1821.654 buffer_time=2.250 print_stall=0 extruder: target=200 temp=200.1 pwm=0.657
Stats 1818.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2086491 bytes_read=745360 bytes_retransmit=9 bytes_invalid=0 send_seq=47882 receive_seq=47882 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=480017 sysload=0.24 cputime=119.426 memavail=718656 print_time=1823.726 buffer_time=3.322 print_stall=0 extruder: target=200 temp=200.0 pwm=0.657
Stats 1819.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2086632 bytes_read=745694 bytes_retransmit=9 bytes_invalid=0 send_seq=47892 receive_seq=47892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=480017 sysload=0.24 cputime=119.486 memavail=718720 print_time=1823.726 buffer_time=2.321 print_stall=0 extruder: target=200 temp=200.0 pwm=0.657
Stats 1820.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2087925 bytes_read=746138 bytes_retransmit=9 bytes_invalid=0 send_seq=47921 receive_seq=47921 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=480245 sysload=0.24 cputime=119.548 memavail=718720 print_time=1824.412 buffer_time=2.006 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 1821.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2089888 bytes_read=746650 bytes_retransmit=9 bytes_invalid=0 send_seq=47961 receive_seq=47961 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=480647 sysload=0.24 cputime=119.627 memavail=719096 print_time=1825.544 buffer_time=2.137 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 1822.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2091866 bytes_read=747144 bytes_retransmit=9 bytes_invalid=0 send_seq=48000 receive_seq=48000 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=481311 sysload=0.22 cputime=119.697 memavail=719308 print_time=1826.503 buffer_time=2.095 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 1823.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2093798 bytes_read=747652 bytes_retransmit=9 bytes_invalid=0 send_seq=48039 receive_seq=48039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=44.6 mcu_temp: temp=38.5 sd_pos=481814 sysload=0.22 cputime=119.769 memavail=720100 print_time=1827.667 buffer_time=2.259 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 1824.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2095795 bytes_read=748155 bytes_retransmit=9 bytes_invalid=0 send_seq=48080 receive_seq=48080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=482325 sysload=0.22 cputime=119.843 memavail=720352 print_time=1828.705 buffer_time=2.295 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1825.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2097037 bytes_read=748579 bytes_retransmit=9 bytes_invalid=0 send_seq=48108 receive_seq=48108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.8 mcu_temp: temp=38.7 sd_pos=482472 sysload=0.22 cputime=119.909 memavail=720116 print_time=1829.511 buffer_time=2.101 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1826.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2099794 bytes_read=749157 bytes_retransmit=9 bytes_invalid=0 send_seq=48161 receive_seq=48161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.417 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=483088 sysload=0.22 cputime=119.983 memavail=720076 print_time=1831.379 buffer_time=2.967 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 1827.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2100986 bytes_read=749612 bytes_retransmit=9 bytes_invalid=0 send_seq=48189 receive_seq=48189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=483540 sysload=0.20 cputime=120.050 memavail=719640 print_time=1831.821 buffer_time=2.409 print_stall=0 extruder: target=200 temp=199.8 pwm=0.673
Stats 1828.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2102886 bytes_read=750091 bytes_retransmit=9 bytes_invalid=0 send_seq=48228 receive_seq=48228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=484223 sysload=0.20 cputime=120.117 memavail=719400 print_time=1832.627 buffer_time=2.214 print_stall=0 extruder: target=200 temp=199.8 pwm=0.688
Stats 1829.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2105469 bytes_read=750654 bytes_retransmit=9 bytes_invalid=0 send_seq=48278 receive_seq=48278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=484839 sysload=0.20 cputime=120.193 memavail=719912 print_time=1834.306 buffer_time=2.888 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1830.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2106766 bytes_read=751102 bytes_retransmit=9 bytes_invalid=0 send_seq=48308 receive_seq=48308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=485263 sysload=0.20 cputime=120.261 memavail=719788 print_time=1834.784 buffer_time=2.364 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1831.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2108680 bytes_read=751576 bytes_retransmit=9 bytes_invalid=0 send_seq=48346 receive_seq=48346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=45.0 mcu_temp: temp=38.5 sd_pos=485908 sysload=0.20 cputime=120.330 memavail=719788 print_time=1835.650 buffer_time=2.229 print_stall=0 extruder: target=200 temp=199.9 pwm=0.628
Stats 1832.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2110007 bytes_read=752054 bytes_retransmit=9 bytes_invalid=0 send_seq=48376 receive_seq=48376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996649 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.6 mcu_temp: temp=38.7 sd_pos=486128 sysload=0.27 cputime=120.400 memavail=719788 print_time=1836.448 buffer_time=2.027 print_stall=0 extruder: target=200 temp=200.0 pwm=0.628
Stats 1833.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2112476 bytes_read=752587 bytes_retransmit=9 bytes_invalid=0 send_seq=48423 receive_seq=48423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996643 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=486849 sysload=0.27 cputime=120.473 memavail=719788 print_time=1837.896 buffer_time=2.474 print_stall=0 extruder: target=200 temp=200.1 pwm=0.628
Stats 1834.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2114625 bytes_read=753086 bytes_retransmit=9 bytes_invalid=0 send_seq=48466 receive_seq=48466 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=487435 sysload=0.27 cputime=120.544 memavail=719796 print_time=1838.887 buffer_time=2.465 print_stall=0 extruder: target=200 temp=200.1 pwm=0.628
Stats 1835.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2115680 bytes_read=753524 bytes_retransmit=9 bytes_invalid=0 send_seq=48491 receive_seq=48491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=487639 sysload=0.27 cputime=120.611 memavail=719800 print_time=1839.644 buffer_time=2.220 print_stall=0 extruder: target=200 temp=200.1 pwm=0.643
Stats 1836.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2116776 bytes_read=753952 bytes_retransmit=9 bytes_invalid=0 send_seq=48517 receive_seq=48517 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=487901 sysload=0.27 cputime=120.676 memavail=719800 print_time=1841.019 buffer_time=2.595 print_stall=0 extruder: target=200 temp=200.1 pwm=0.643
Stats 1837.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2117688 bytes_read=754371 bytes_retransmit=9 bytes_invalid=0 send_seq=48541 receive_seq=48541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.475 raspberry_pi: temp=45.2 mcu_temp: temp=38.6 sd_pos=488126 sysload=0.24 cputime=120.740 memavail=719324 print_time=1841.515 buffer_time=2.090 print_stall=0 extruder: target=200 temp=200.1 pwm=0.643
Stats 1838.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2119502 bytes_read=754863 bytes_retransmit=9 bytes_invalid=0 send_seq=48578 receive_seq=48578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=488580 sysload=0.24 cputime=120.809 memavail=719324 print_time=1842.843 buffer_time=2.418 print_stall=0 extruder: target=200 temp=200.0 pwm=0.643
Stats 1839.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2120860 bytes_read=755300 bytes_retransmit=9 bytes_invalid=0 send_seq=48608 receive_seq=48608 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=45.3 mcu_temp: temp=38.7 sd_pos=488739 sysload=0.24 cputime=120.879 memavail=719080 print_time=1844.465 buffer_time=3.039 print_stall=0 extruder: target=200 temp=200.0 pwm=0.691
Stats 1840.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2121017 bytes_read=755637 bytes_retransmit=9 bytes_invalid=0 send_seq=48619 receive_seq=48619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=488739 sysload=0.24 cputime=120.937 memavail=719080 print_time=1844.465 buffer_time=2.038 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 1841.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2123186 bytes_read=756170 bytes_retransmit=9 bytes_invalid=0 send_seq=48663 receive_seq=48663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=44.8 mcu_temp: temp=38.6 sd_pos=489169 sysload=0.24 cputime=121.009 memavail=718580 print_time=1845.821 buffer_time=2.393 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 1842.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2125312 bytes_read=756693 bytes_retransmit=9 bytes_invalid=0 send_seq=48705 receive_seq=48705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=489607 sysload=0.22 cputime=121.077 memavail=718584 print_time=1846.947 buffer_time=2.518 print_stall=0 extruder: target=200 temp=199.8 pwm=0.691
Stats 1843.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2127191 bytes_read=757167 bytes_retransmit=9 bytes_invalid=0 send_seq=48743 receive_seq=48743 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=44.1 mcu_temp: temp=38.6 sd_pos=490105 sysload=0.22 cputime=121.151 memavail=718332 print_time=1847.911 buffer_time=2.481 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 1844.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2128909 bytes_read=757670 bytes_retransmit=9 bytes_invalid=0 send_seq=48781 receive_seq=48781 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=490781 sysload=0.22 cputime=121.221 memavail=718360 print_time=1848.672 buffer_time=2.241 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 1845.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2130771 bytes_read=758098 bytes_retransmit=9 bytes_invalid=0 send_seq=48819 receive_seq=48807 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=386 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.460 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=491153 sysload=0.22 cputime=121.290 memavail=718368 print_time=1850.240 buffer_time=2.808 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 1846.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2132222 bytes_read=758602 bytes_retransmit=9 bytes_invalid=0 send_seq=48851 receive_seq=48851 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.278 raspberry_pi: temp=44.4 mcu_temp: temp=38.6 sd_pos=491238 sysload=0.22 cputime=121.353 memavail=718128 print_time=1850.832 buffer_time=2.400 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 1847.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2133960 bytes_read=759115 bytes_retransmit=9 bytes_invalid=0 send_seq=48888 receive_seq=48888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=491520 sysload=0.21 cputime=121.422 memavail=718920 print_time=1851.932 buffer_time=2.499 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 1848.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2135632 bytes_read=759588 bytes_retransmit=9 bytes_invalid=0 send_seq=48923 receive_seq=48923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=491947 sysload=0.21 cputime=121.489 memavail=718688 print_time=1853.002 buffer_time=2.568 print_stall=0 extruder: target=200 temp=199.9 pwm=0.671
Stats 1849.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2136900 bytes_read=760017 bytes_retransmit=9 bytes_invalid=0 send_seq=48952 receive_seq=48952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=492400 sysload=0.21 cputime=121.557 memavail=718636 print_time=1853.455 buffer_time=2.020 print_stall=0 extruder: target=200 temp=199.9 pwm=0.671
Stats 1850.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2139273 bytes_read=760565 bytes_retransmit=9 bytes_invalid=0 send_seq=48999 receive_seq=48999 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.445 raspberry_pi: temp=43.7 mcu_temp: temp=38.6 sd_pos=493240 sysload=0.21 cputime=121.632 memavail=718976 print_time=1854.449 buffer_time=2.014 print_stall=0 extruder: target=200 temp=199.9 pwm=0.671
Stats 1851.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2141293 bytes_read=761063 bytes_retransmit=9 bytes_invalid=0 send_seq=49039 receive_seq=49039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.7 mcu_temp: temp=38.6 sd_pos=493695 sysload=0.21 cputime=121.707 memavail=718976 print_time=1855.948 buffer_time=2.511 print_stall=0 extruder: target=200 temp=199.9 pwm=0.671
Stats 1852.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2143529 bytes_read=761522 bytes_retransmit=9 bytes_invalid=0 send_seq=49083 receive_seq=49071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=758 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=43.8 mcu_temp: temp=38.6 sd_pos=494737 sysload=0.19 cputime=121.782 memavail=719252 print_time=1857.290 buffer_time=2.849 print_stall=0 extruder: target=200 temp=200.0 pwm=0.647
Stats 1853.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2145078 bytes_read=762060 bytes_retransmit=9 bytes_invalid=0 send_seq=49116 receive_seq=49116 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.297 raspberry_pi: temp=43.8 mcu_temp: temp=38.5 sd_pos=494929 sysload=0.19 cputime=121.853 memavail=719252 print_time=1857.478 buffer_time=2.037 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 1854.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2147156 bytes_read=762573 bytes_retransmit=9 bytes_invalid=0 send_seq=49159 receive_seq=49159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=495348 sysload=0.19 cputime=121.932 memavail=719516 print_time=1859.021 buffer_time=2.578 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 1855.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2148414 bytes_read=762997 bytes_retransmit=9 bytes_invalid=0 send_seq=49187 receive_seq=49187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=495705 sysload=0.19 cputime=122.003 memavail=719524 print_time=1859.542 buffer_time=2.099 print_stall=0 extruder: target=200 temp=200.2 pwm=0.647
Stats 1856.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2150815 bytes_read=763555 bytes_retransmit=9 bytes_invalid=0 send_seq=49234 receive_seq=49233 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=43.7 mcu_temp: temp=38.6 sd_pos=496412 sysload=0.19 cputime=122.079 memavail=719724 print_time=1860.641 buffer_time=2.197 print_stall=0 extruder: target=200 temp=200.2 pwm=0.612
Stats 1857.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2152530 bytes_read=764044 bytes_retransmit=9 bytes_invalid=0 send_seq=49269 receive_seq=49269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=496722 sysload=0.25 cputime=122.156 memavail=719568 print_time=1862.644 buffer_time=3.200 print_stall=0 extruder: target=200 temp=200.2 pwm=0.612
Stats 1858.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2152703 bytes_read=764388 bytes_retransmit=9 bytes_invalid=0 send_seq=49281 receive_seq=49281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=496722 sysload=0.25 cputime=122.220 memavail=719572 print_time=1862.644 buffer_time=2.200 print_stall=0 extruder: target=200 temp=200.2 pwm=0.669
Stats 1859.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2154471 bytes_read=764881 bytes_retransmit=9 bytes_invalid=0 send_seq=49317 receive_seq=49317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.3 mcu_temp: temp=38.5 sd_pos=497141 sysload=0.25 cputime=122.294 memavail=719904 print_time=1864.006 buffer_time=2.561 print_stall=0 extruder: target=200 temp=200.1 pwm=0.669
Stats 1860.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2155355 bytes_read=765289 bytes_retransmit=9 bytes_invalid=0 send_seq=49339 receive_seq=49339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=497334 sysload=0.25 cputime=122.366 memavail=719972 print_time=1864.473 buffer_time=2.026 print_stall=0 extruder: target=200 temp=200.1 pwm=0.669
Stats 1861.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2156676 bytes_read=765718 bytes_retransmit=9 bytes_invalid=0 send_seq=49368 receive_seq=49368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=497495 sysload=0.25 cputime=122.437 memavail=720476 print_time=1866.090 buffer_time=2.642 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 1862.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2158012 bytes_read=766215 bytes_retransmit=9 bytes_invalid=0 send_seq=49399 receive_seq=49399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.328 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=497690 sysload=0.31 cputime=122.508 memavail=720476 print_time=1866.761 buffer_time=2.313 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 1863.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2159783 bytes_read=766619 bytes_retransmit=9 bytes_invalid=0 send_seq=49435 receive_seq=49423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=162 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=498095 sysload=0.31 cputime=122.582 memavail=720480 print_time=1867.904 buffer_time=2.455 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 1864.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2161171 bytes_read=767099 bytes_retransmit=9 bytes_invalid=0 send_seq=49464 receive_seq=49464 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=498334 sysload=0.31 cputime=122.651 memavail=720756 print_time=1868.557 buffer_time=2.107 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 1865.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2163043 bytes_read=767616 bytes_retransmit=9 bytes_invalid=0 send_seq=49504 receive_seq=49504 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.465 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=498863 sysload=0.31 cputime=122.733 memavail=721016 print_time=1869.538 buffer_time=2.087 print_stall=0 extruder: target=200 temp=200.0 pwm=0.696
Stats 1866.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2165608 bytes_read=768150 bytes_retransmit=9 bytes_invalid=0 send_seq=49554 receive_seq=49554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=499765 sysload=0.31 cputime=122.821 memavail=721136 print_time=1871.048 buffer_time=2.597 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 1867.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2166954 bytes_read=768604 bytes_retransmit=9 bytes_invalid=0 send_seq=49585 receive_seq=49585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=499871 sysload=0.45 cputime=122.896 memavail=721444 print_time=1871.655 buffer_time=2.202 print_stall=0 extruder: target=200 temp=200.1 pwm=0.646
Stats 1868.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2168260 bytes_read=769076 bytes_retransmit=9 bytes_invalid=0 send_seq=49614 receive_seq=49614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.434 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=499997 sysload=0.45 cputime=122.971 memavail=721696 print_time=1872.472 buffer_time=2.018 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 1869.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2170320 bytes_read=769570 bytes_retransmit=9 bytes_invalid=0 send_seq=49656 receive_seq=49656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=500331 sysload=0.45 cputime=123.043 memavail=721896 print_time=1873.710 buffer_time=2.255 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 1870.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2172945 bytes_read=770109 bytes_retransmit=9 bytes_invalid=0 send_seq=49707 receive_seq=49707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=500926 sysload=0.45 cputime=123.120 memavail=721704 print_time=1875.515 buffer_time=3.060 print_stall=0 extruder: target=200 temp=200.0 pwm=0.685
Stats 1871.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2173109 bytes_read=770486 bytes_retransmit=9 bytes_invalid=0 send_seq=49717 receive_seq=49717 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=500926 sysload=0.45 cputime=123.185 memavail=721464 print_time=1875.515 buffer_time=2.059 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 1872.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2176101 bytes_read=771060 bytes_retransmit=9 bytes_invalid=0 send_seq=49772 receive_seq=49772 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.317 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=502063 sysload=0.57 cputime=123.263 memavail=721916 print_time=1876.792 buffer_time=2.336 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 1873.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2177391 bytes_read=771489 bytes_retransmit=9 bytes_invalid=0 send_seq=49801 receive_seq=49801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=502348 sysload=0.57 cputime=123.334 memavail=721968 print_time=1877.561 buffer_time=2.103 print_stall=0 extruder: target=200 temp=199.8 pwm=0.685
Stats 1874.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2178842 bytes_read=771976 bytes_retransmit=9 bytes_invalid=0 send_seq=49833 receive_seq=49833 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=502775 sysload=0.57 cputime=123.411 memavail=721968 print_time=1878.468 buffer_time=2.009 print_stall=0 extruder: target=200 temp=199.8 pwm=0.707
Stats 1875.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2181941 bytes_read=772555 bytes_retransmit=9 bytes_invalid=0 send_seq=49892 receive_seq=49892 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.1 mcu_temp: temp=38.5 sd_pos=503782 sysload=0.57 cputime=123.490 memavail=721752 print_time=1879.817 buffer_time=2.358 print_stall=0 extruder: target=200 temp=199.9 pwm=0.650
Stats 1876.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000053 bytes_write=2183223 bytes_read=772999 bytes_retransmit=9 bytes_invalid=0 send_seq=49921 receive_seq=49921 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=504067 sysload=0.57 cputime=123.563 memavail=721752 print_time=1880.620 buffer_time=2.160 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 1877.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2184627 bytes_read=773476 bytes_retransmit=9 bytes_invalid=0 send_seq=49951 receive_seq=49951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=504430 sysload=0.53 cputime=123.632 memavail=721752 print_time=1881.546 buffer_time=2.085 print_stall=0 extruder: target=200 temp=200.0 pwm=0.650
Stats 1878.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2187654 bytes_read=774040 bytes_retransmit=9 bytes_invalid=0 send_seq=50007 receive_seq=50007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=505273 sysload=0.53 cputime=123.714 memavail=721952 print_time=1882.979 buffer_time=2.516 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 1879.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2188932 bytes_read=774484 bytes_retransmit=9 bytes_invalid=0 send_seq=50036 receive_seq=50036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=505542 sysload=0.53 cputime=123.783 memavail=722004 print_time=1883.810 buffer_time=2.346 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 1880.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2190037 bytes_read=774931 bytes_retransmit=9 bytes_invalid=0 send_seq=50063 receive_seq=50063 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=505805 sysload=0.53 cputime=123.859 memavail=721760 print_time=1885.176 buffer_time=2.712 print_stall=0 extruder: target=200 temp=200.2 pwm=0.655
Stats 1881.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2191003 bytes_read=775340 bytes_retransmit=9 bytes_invalid=0 send_seq=50088 receive_seq=50088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=506033 sysload=0.53 cputime=123.927 memavail=721764 print_time=1885.688 buffer_time=2.222 print_stall=0 extruder: target=200 temp=200.2 pwm=0.655
Stats 1882.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2192014 bytes_read=775774 bytes_retransmit=9 bytes_invalid=0 send_seq=50112 receive_seq=50112 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=506258 sysload=0.49 cputime=123.993 memavail=721764 print_time=1886.536 buffer_time=2.070 print_stall=0 extruder: target=200 temp=200.2 pwm=0.655
Stats 1883.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2194090 bytes_read=776291 bytes_retransmit=9 bytes_invalid=0 send_seq=50153 receive_seq=50153 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=506645 sysload=0.49 cputime=124.065 memavail=721524 print_time=1888.628 buffer_time=3.160 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 1884.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2194247 bytes_read=776630 bytes_retransmit=9 bytes_invalid=0 send_seq=50164 receive_seq=50164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=506645 sysload=0.49 cputime=124.125 memavail=721724 print_time=1888.628 buffer_time=2.159 print_stall=0 extruder: target=200 temp=200.2 pwm=0.637
Stats 1885.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2196467 bytes_read=777154 bytes_retransmit=9 bytes_invalid=0 send_seq=50209 receive_seq=50209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=507078 sysload=0.49 cputime=124.196 memavail=721032 print_time=1889.983 buffer_time=2.514 print_stall=0 extruder: target=200 temp=200.2 pwm=0.637
Stats 1886.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2198531 bytes_read=777671 bytes_retransmit=9 bytes_invalid=0 send_seq=50250 receive_seq=50250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=507515 sysload=0.49 cputime=124.269 memavail=721032 print_time=1891.098 buffer_time=2.628 print_stall=0 extruder: target=200 temp=200.1 pwm=0.637
Stats 1887.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2200353 bytes_read=778150 bytes_retransmit=9 bytes_invalid=0 send_seq=50286 receive_seq=50286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=508043 sysload=0.45 cputime=124.344 memavail=721568 print_time=1892.081 buffer_time=2.610 print_stall=0 extruder: target=200 temp=200.1 pwm=0.637
Stats 1888.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2201334 bytes_read=778569 bytes_retransmit=9 bytes_invalid=0 send_seq=50310 receive_seq=50310 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=508440 sysload=0.45 cputime=124.415 memavail=721328 print_time=1892.541 buffer_time=2.070 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 1889.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2203188 bytes_read=779067 bytes_retransmit=9 bytes_invalid=0 send_seq=50348 receive_seq=50348 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.4 mcu_temp: temp=38.6 sd_pos=508973 sysload=0.45 cputime=124.489 memavail=721328 print_time=1893.599 buffer_time=2.126 print_stall=0 extruder: target=200 temp=200.0 pwm=0.655
Stats 1890.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2205433 bytes_read=779561 bytes_retransmit=9 bytes_invalid=0 send_seq=50392 receive_seq=50392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=509197 sysload=0.45 cputime=124.560 memavail=720836 print_time=1895.030 buffer_time=2.557 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 1891.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2206741 bytes_read=780006 bytes_retransmit=9 bytes_invalid=0 send_seq=50422 receive_seq=50422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=509424 sysload=0.45 cputime=124.627 memavail=720584 print_time=1895.759 buffer_time=2.285 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 1892.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2208548 bytes_read=780518 bytes_retransmit=9 bytes_invalid=0 send_seq=50459 receive_seq=50459 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=509626 sysload=0.41 cputime=124.698 memavail=720932 print_time=1896.962 buffer_time=2.487 print_stall=0 extruder: target=200 temp=199.8 pwm=0.708
Stats 1893.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2210303 bytes_read=780987 bytes_retransmit=9 bytes_invalid=0 send_seq=50496 receive_seq=50496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=510069 sysload=0.41 cputime=124.769 memavail=720704 print_time=1898.096 buffer_time=2.620 print_stall=0 extruder: target=200 temp=199.8 pwm=0.708
Stats 1894.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2211619 bytes_read=781431 bytes_retransmit=9 bytes_invalid=0 send_seq=50525 receive_seq=50525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=43.9 mcu_temp: temp=38.6 sd_pos=510521 sysload=0.41 cputime=124.841 memavail=720716 print_time=1898.571 buffer_time=2.093 print_stall=0 extruder: target=200 temp=199.9 pwm=0.668
Stats 1895.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2213957 bytes_read=781973 bytes_retransmit=9 bytes_invalid=0 send_seq=50571 receive_seq=50571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=511425 sysload=0.41 cputime=124.918 memavail=720492 print_time=1899.567 buffer_time=2.090 print_stall=0 extruder: target=200 temp=199.9 pwm=0.668
Stats 1896.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2216039 bytes_read=782457 bytes_retransmit=9 bytes_invalid=0 send_seq=50611 receive_seq=50611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.1 mcu_temp: temp=38.6 sd_pos=511876 sysload=0.41 cputime=124.989 memavail=720512 print_time=1901.055 buffer_time=2.576 print_stall=0 extruder: target=200 temp=199.9 pwm=0.668
Stats 1897.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2217331 bytes_read=782911 bytes_retransmit=9 bytes_invalid=0 send_seq=50639 receive_seq=50639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.4 mcu_temp: temp=38.6 sd_pos=512267 sysload=0.46 cputime=125.057 memavail=721300 print_time=1901.556 buffer_time=2.077 print_stall=0 extruder: target=200 temp=200.0 pwm=0.668
Stats 1898.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2219659 bytes_read=783448 bytes_retransmit=9 bytes_invalid=0 send_seq=50684 receive_seq=50684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=513079 sysload=0.46 cputime=125.131 memavail=721300 print_time=1902.597 buffer_time=2.118 print_stall=0 extruder: target=200 temp=200.1 pwm=0.599
Stats 1899.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2221757 bytes_read=783937 bytes_retransmit=9 bytes_invalid=0 send_seq=50725 receive_seq=50725 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=513499 sysload=0.46 cputime=125.201 memavail=721304 print_time=1904.132 buffer_time=2.652 print_stall=0 extruder: target=200 temp=200.1 pwm=0.599
Stats 1900.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2223107 bytes_read=784386 bytes_retransmit=9 bytes_invalid=0 send_seq=50755 receive_seq=50755 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.3 mcu_temp: temp=38.7 sd_pos=513854 sysload=0.46 cputime=125.272 memavail=721580 print_time=1904.667 buffer_time=2.186 print_stall=0 extruder: target=200 temp=200.1 pwm=0.599
Stats 1901.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2224986 bytes_read=784893 bytes_retransmit=9 bytes_invalid=0 send_seq=50794 receive_seq=50794 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=44.8 mcu_temp: temp=38.8 sd_pos=514340 sysload=0.46 cputime=125.342 memavail=721608 print_time=1905.575 buffer_time=2.093 print_stall=0 extruder: target=200 temp=200.2 pwm=0.599
Stats 1902.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2226563 bytes_read=785357 bytes_retransmit=9 bytes_invalid=0 send_seq=50827 receive_seq=50827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=514678 sysload=0.42 cputime=125.413 memavail=721608 print_time=1907.266 buffer_time=2.783 print_stall=0 extruder: target=200 temp=200.1 pwm=0.657
Stats 1903.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2227297 bytes_read=785746 bytes_retransmit=9 bytes_invalid=0 send_seq=50845 receive_seq=50845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=44.7 mcu_temp: temp=38.7 sd_pos=514873 sysload=0.42 cputime=125.478 memavail=721612 print_time=1907.765 buffer_time=2.282 print_stall=0 extruder: target=200 temp=200.1 pwm=0.657
Stats 1904.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2229076 bytes_read=786238 bytes_retransmit=9 bytes_invalid=0 send_seq=50881 receive_seq=50881 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.8 mcu_temp: temp=38.8 sd_pos=515293 sysload=0.42 cputime=125.550 memavail=721360 print_time=1909.121 buffer_time=2.637 print_stall=0 extruder: target=200 temp=200.1 pwm=0.657
Stats 1905.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2229937 bytes_read=786627 bytes_retransmit=9 bytes_invalid=0 send_seq=50902 receive_seq=50902 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.4 mcu_temp: temp=38.7 sd_pos=515488 sysload=0.42 cputime=125.614 memavail=720872 print_time=1909.610 buffer_time=2.125 print_stall=0 extruder: target=200 temp=200.0 pwm=0.657
Stats 1906.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2231292 bytes_read=787076 bytes_retransmit=9 bytes_invalid=0 send_seq=50932 receive_seq=50932 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=515644 sysload=0.42 cputime=125.683 memavail=721660 print_time=1911.218 buffer_time=2.732 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 1907.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2232572 bytes_read=787543 bytes_retransmit=9 bytes_invalid=0 send_seq=50960 receive_seq=50960 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.290 raspberry_pi: temp=44.7 mcu_temp: temp=38.8 sd_pos=515834 sysload=0.39 cputime=125.749 memavail=721408 print_time=1911.879 buffer_time=2.392 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 1908.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2233677 bytes_read=787957 bytes_retransmit=9 bytes_invalid=0 send_seq=50986 receive_seq=50986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=516072 sysload=0.39 cputime=125.817 memavail=721408 print_time=1912.575 buffer_time=2.088 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 1909.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2235638 bytes_read=788456 bytes_retransmit=9 bytes_invalid=0 send_seq=51026 receive_seq=51026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=44.7 mcu_temp: temp=38.6 sd_pos=516471 sysload=0.39 cputime=125.889 memavail=721156 print_time=1913.632 buffer_time=2.143 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 1910.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2238232 bytes_read=789023 bytes_retransmit=9 bytes_invalid=0 send_seq=51077 receive_seq=51077 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=517268 sysload=0.39 cputime=125.975 memavail=721184 print_time=1915.033 buffer_time=2.543 print_stall=0 extruder: target=200 temp=199.8 pwm=0.678
Stats 1911.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2240471 bytes_read=789527 bytes_retransmit=9 bytes_invalid=0 send_seq=51121 receive_seq=51121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.8 mcu_temp: temp=38.6 sd_pos=518013 sysload=0.39 cputime=126.051 memavail=721020 print_time=1916.138 buffer_time=2.647 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 1912.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2241916 bytes_read=790001 bytes_retransmit=9 bytes_invalid=0 send_seq=51153 receive_seq=51153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=518117 sysload=0.36 cputime=126.124 memavail=721284 print_time=1916.792 buffer_time=2.302 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 1913.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2243208 bytes_read=790453 bytes_retransmit=9 bytes_invalid=0 send_seq=51181 receive_seq=51181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996651 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=518239 sysload=0.36 cputime=126.190 memavail=721924 print_time=1917.576 buffer_time=2.084 print_stall=0 extruder: target=200 temp=199.8 pwm=0.678
Stats 1914.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2245025 bytes_read=790932 bytes_retransmit=9 bytes_invalid=0 send_seq=51220 receive_seq=51220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996643 heater_bed: target=60 temp=60.0 pwm=0.423 raspberry_pi: temp=44.7 mcu_temp: temp=38.7 sd_pos=518449 sysload=0.36 cputime=126.261 memavail=721924 print_time=1918.671 buffer_time=2.178 print_stall=0 extruder: target=200 temp=199.8 pwm=0.683
Stats 1915.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2246590 bytes_read=791394 bytes_retransmit=9 bytes_invalid=0 send_seq=51254 receive_seq=51254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996638 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=518877 sysload=0.36 cputime=126.336 memavail=721172 print_time=1919.729 buffer_time=2.235 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 1916.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2249574 bytes_read=791977 bytes_retransmit=9 bytes_invalid=0 send_seq=51310 receive_seq=51310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.6 mcu_temp: temp=38.6 sd_pos=519946 sysload=0.36 cputime=126.413 memavail=720936 print_time=1921.027 buffer_time=2.532 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 1917.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2250876 bytes_read=792421 bytes_retransmit=9 bytes_invalid=0 send_seq=51339 receive_seq=51339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=520266 sysload=0.33 cputime=126.483 memavail=721724 print_time=1921.797 buffer_time=2.301 print_stall=0 extruder: target=200 temp=200.0 pwm=0.632
Stats 1918.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2252336 bytes_read=792896 bytes_retransmit=9 bytes_invalid=0 send_seq=51372 receive_seq=51372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=520696 sysload=0.33 cputime=126.552 memavail=721520 print_time=1922.698 buffer_time=2.201 print_stall=0 extruder: target=200 temp=200.0 pwm=0.632
Stats 1919.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2255404 bytes_read=793498 bytes_retransmit=9 bytes_invalid=0 send_seq=51430 receive_seq=51430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=521701 sysload=0.33 cputime=126.636 memavail=721472 print_time=1924.070 buffer_time=2.574 print_stall=0 extruder: target=200 temp=200.0 pwm=0.632
Stats 1920.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2256747 bytes_read=793942 bytes_retransmit=9 bytes_invalid=0 send_seq=51462 receive_seq=51462 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.3 mcu_temp: temp=38.7 sd_pos=521992 sysload=0.33 cputime=126.705 memavail=720972 print_time=1924.871 buffer_time=2.373 print_stall=0 extruder: target=200 temp=200.1 pwm=0.632
Stats 1921.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2258145 bytes_read=794396 bytes_retransmit=9 bytes_invalid=0 send_seq=51493 receive_seq=51493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.4 mcu_temp: temp=38.6 sd_pos=522353 sysload=0.33 cputime=126.772 memavail=721532 print_time=1925.792 buffer_time=2.294 print_stall=0 extruder: target=200 temp=200.1 pwm=0.632
Stats 1922.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2261192 bytes_read=795003 bytes_retransmit=9 bytes_invalid=0 send_seq=51549 receive_seq=51549 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.333 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=523163 sysload=0.30 cputime=126.847 memavail=721284 print_time=1927.240 buffer_time=2.741 print_stall=0 extruder: target=200 temp=200.2 pwm=0.629
Stats 1923.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2262437 bytes_read=795427 bytes_retransmit=9 bytes_invalid=0 send_seq=51577 receive_seq=51577 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.333 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=523438 sysload=0.30 cputime=126.913 memavail=721296 print_time=1928.068 buffer_time=2.568 print_stall=0 extruder: target=200 temp=200.2 pwm=0.629
Stats 1924.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2262956 bytes_read=795806 bytes_retransmit=9 bytes_invalid=0 send_seq=51593 receive_seq=51593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=523507 sysload=0.30 cputime=126.981 memavail=722060 print_time=1928.931 buffer_time=2.431 print_stall=0 extruder: target=200 temp=200.1 pwm=0.629
Stats 1925.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2264376 bytes_read=796278 bytes_retransmit=9 bytes_invalid=0 send_seq=51625 receive_seq=51625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=523863 sysload=0.30 cputime=127.047 memavail=722060 print_time=1929.948 buffer_time=2.447 print_stall=0 extruder: target=200 temp=200.1 pwm=0.684
Stats 1926.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2265398 bytes_read=796687 bytes_retransmit=9 bytes_invalid=0 send_seq=51650 receive_seq=51650 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=524117 sysload=0.30 cputime=127.112 memavail=721824 print_time=1930.781 buffer_time=2.280 print_stall=0 extruder: target=200 temp=200.0 pwm=0.684
Stats 1927.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2267556 bytes_read=797221 bytes_retransmit=9 bytes_invalid=0 send_seq=51694 receive_seq=51694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.9 mcu_temp: temp=38.6 sd_pos=524503 sysload=0.28 cputime=127.182 memavail=721824 print_time=1932.886 buffer_time=3.385 print_stall=0 extruder: target=200 temp=200.0 pwm=0.684
Stats 1928.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2267729 bytes_read=797593 bytes_retransmit=9 bytes_invalid=0 send_seq=51706 receive_seq=51706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=524503 sysload=0.28 cputime=127.246 memavail=721824 print_time=1932.886 buffer_time=2.384 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 1929.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2268982 bytes_read=798022 bytes_retransmit=9 bytes_invalid=0 send_seq=51735 receive_seq=51735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=524694 sysload=0.28 cputime=127.306 memavail=721344 print_time=1933.543 buffer_time=2.040 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 1930.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2270901 bytes_read=798531 bytes_retransmit=9 bytes_invalid=0 send_seq=51777 receive_seq=51777 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.6 mcu_temp: temp=38.6 sd_pos=525096 sysload=0.28 cputime=127.374 memavail=721344 print_time=1934.622 buffer_time=2.118 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 1931.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2272895 bytes_read=799053 bytes_retransmit=9 bytes_invalid=0 send_seq=51819 receive_seq=51819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.0 mcu_temp: temp=38.6 sd_pos=525722 sysload=0.28 cputime=127.443 memavail=721124 print_time=1935.588 buffer_time=2.084 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 1932.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2274748 bytes_read=799542 bytes_retransmit=9 bytes_invalid=0 send_seq=51857 receive_seq=51857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=526125 sysload=0.33 cputime=127.510 memavail=720872 print_time=1936.695 buffer_time=2.190 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 1933.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2277546 bytes_read=800116 bytes_retransmit=9 bytes_invalid=0 send_seq=51912 receive_seq=51912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=526857 sysload=0.33 cputime=127.585 memavail=720896 print_time=1938.154 buffer_time=2.648 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 1934.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2279216 bytes_read=800618 bytes_retransmit=9 bytes_invalid=0 send_seq=51950 receive_seq=51950 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=527049 sysload=0.33 cputime=127.653 memavail=720672 print_time=1938.918 buffer_time=2.412 print_stall=0 extruder: target=200 temp=199.9 pwm=0.675
Stats 1935.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2280348 bytes_read=801042 bytes_retransmit=9 bytes_invalid=0 send_seq=51978 receive_seq=51978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.447 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=527143 sysload=0.33 cputime=127.716 memavail=721120 print_time=1939.508 buffer_time=2.002 print_stall=0 extruder: target=200 temp=199.9 pwm=0.675
Stats 1936.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2282683 bytes_read=801601 bytes_retransmit=9 bytes_invalid=0 send_seq=52024 receive_seq=52024 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=527399 sysload=0.33 cputime=127.784 memavail=720692 print_time=1941.028 buffer_time=2.521 print_stall=0 extruder: target=200 temp=200.0 pwm=0.675
Stats 1937.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2284488 bytes_read=802089 bytes_retransmit=9 bytes_invalid=0 send_seq=52062 receive_seq=52062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=527883 sysload=0.31 cputime=127.854 memavail=720440 print_time=1942.164 buffer_time=2.655 print_stall=0 extruder: target=200 temp=200.1 pwm=0.609
Stats 1938.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2285869 bytes_read=802533 bytes_retransmit=9 bytes_invalid=0 send_seq=52094 receive_seq=52094 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=528399 sysload=0.31 cputime=127.918 memavail=720440 print_time=1942.644 buffer_time=2.135 print_stall=0 extruder: target=200 temp=200.1 pwm=0.609
Stats 1939.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2288230 bytes_read=803081 bytes_retransmit=9 bytes_invalid=0 send_seq=52141 receive_seq=52141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=529280 sysload=0.31 cputime=127.990 memavail=720208 print_time=1943.647 buffer_time=2.137 print_stall=0 extruder: target=200 temp=200.1 pwm=0.609
Stats 1940.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2290288 bytes_read=803581 bytes_retransmit=9 bytes_invalid=0 send_seq=52182 receive_seq=52182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=529768 sysload=0.31 cputime=128.061 memavail=720460 print_time=1945.125 buffer_time=2.614 print_stall=0 extruder: target=200 temp=200.2 pwm=0.609
Stats 1941.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2291646 bytes_read=804020 bytes_retransmit=9 bytes_invalid=0 send_seq=52215 receive_seq=52215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=530150 sysload=0.31 cputime=128.128 memavail=720216 print_time=1945.646 buffer_time=2.135 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 1942.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2294036 bytes_read=804533 bytes_retransmit=9 bytes_invalid=0 send_seq=52262 receive_seq=52253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=530965 sysload=0.28 cputime=128.201 memavail=720472 print_time=1946.700 buffer_time=2.187 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 1943.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2296040 bytes_read=805076 bytes_retransmit=9 bytes_invalid=0 send_seq=52302 receive_seq=52302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=531351 sysload=0.28 cputime=128.268 memavail=720748 print_time=1948.221 buffer_time=2.708 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 1944.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2297331 bytes_read=805505 bytes_retransmit=9 bytes_invalid=0 send_seq=52331 receive_seq=52331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=531670 sysload=0.28 cputime=128.333 memavail=721000 print_time=1948.767 buffer_time=2.253 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 1945.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2299227 bytes_read=806018 bytes_retransmit=9 bytes_invalid=0 send_seq=52371 receive_seq=52371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=532157 sysload=0.28 cputime=128.401 memavail=721000 print_time=1949.678 buffer_time=2.163 print_stall=0 extruder: target=200 temp=200.0 pwm=0.648
Stats 1946.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2300822 bytes_read=806486 bytes_retransmit=9 bytes_invalid=0 send_seq=52405 receive_seq=52405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=43.7 mcu_temp: temp=38.7 sd_pos=532497 sysload=0.28 cputime=128.474 memavail=721252 print_time=1951.368 buffer_time=2.853 print_stall=0 extruder: target=200 temp=200.0 pwm=0.681
Stats 1947.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2301593 bytes_read=806895 bytes_retransmit=9 bytes_invalid=0 send_seq=52427 receive_seq=52427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.8 mcu_temp: temp=38.7 sd_pos=532691 sysload=0.26 cputime=128.539 memavail=721008 print_time=1951.853 buffer_time=2.336 print_stall=0 extruder: target=200 temp=200.0 pwm=0.681
Stats 1948.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2302844 bytes_read=807358 bytes_retransmit=9 bytes_invalid=0 send_seq=52457 receive_seq=52457 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=532947 sysload=0.26 cputime=128.608 memavail=720768 print_time=1952.717 buffer_time=2.199 print_stall=0 extruder: target=200 temp=199.9 pwm=0.735
Stats 1949.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2304291 bytes_read=807816 bytes_retransmit=9 bytes_invalid=0 send_seq=52489 receive_seq=52489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.353 raspberry_pi: temp=43.7 mcu_temp: temp=38.7 sd_pos=533338 sysload=0.26 cputime=128.677 memavail=721024 print_time=1953.720 buffer_time=2.202 print_stall=0 extruder: target=200 temp=199.9 pwm=0.735
Stats 1950.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2305646 bytes_read=808255 bytes_retransmit=9 bytes_invalid=0 send_seq=52520 receive_seq=52520 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.353 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=533498 sysload=0.26 cputime=128.743 memavail=721224 print_time=1955.320 buffer_time=2.801 print_stall=0 extruder: target=200 temp=199.9 pwm=0.682
Stats 1951.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2306961 bytes_read=808723 bytes_retransmit=9 bytes_invalid=0 send_seq=52551 receive_seq=52551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=533659 sysload=0.26 cputime=128.813 memavail=721904 print_time=1955.973 buffer_time=2.454 print_stall=0 extruder: target=200 temp=199.9 pwm=0.682
Stats 1952.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2308109 bytes_read=809176 bytes_retransmit=9 bytes_invalid=0 send_seq=52579 receive_seq=52579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=533899 sysload=0.24 cputime=128.879 memavail=721916 print_time=1956.689 buffer_time=2.170 print_stall=0 extruder: target=200 temp=199.9 pwm=0.682
Stats 1953.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2310325 bytes_read=809685 bytes_retransmit=9 bytes_invalid=0 send_seq=52624 receive_seq=52624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.482 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=534338 sysload=0.24 cputime=128.948 memavail=721948 print_time=1957.812 buffer_time=2.292 print_stall=0 extruder: target=200 temp=199.9 pwm=0.682
Stats 1954.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2312309 bytes_read=810203 bytes_retransmit=9 bytes_invalid=0 send_seq=52665 receive_seq=52665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=534869 sysload=0.24 cputime=129.019 memavail=721948 print_time=1958.827 buffer_time=2.306 print_stall=0 extruder: target=200 temp=199.9 pwm=0.650
Stats 1955.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2314487 bytes_read=810726 bytes_retransmit=9 bytes_invalid=0 send_seq=52710 receive_seq=52710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=535419 sysload=0.24 cputime=129.093 memavail=721948 print_time=1959.873 buffer_time=2.351 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 1956.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2315763 bytes_read=811155 bytes_retransmit=9 bytes_invalid=0 send_seq=52739 receive_seq=52739 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=43.2 mcu_temp: temp=38.6 sd_pos=535659 sysload=0.24 cputime=129.159 memavail=721948 print_time=1960.554 buffer_time=2.032 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 1957.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2317987 bytes_read=811713 bytes_retransmit=9 bytes_invalid=0 send_seq=52785 receive_seq=52785 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=536009 sysload=0.22 cputime=129.238 memavail=721232 print_time=1961.923 buffer_time=2.400 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 1958.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2319328 bytes_read=812166 bytes_retransmit=9 bytes_invalid=0 send_seq=52816 receive_seq=52816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=536115 sysload=0.22 cputime=129.304 memavail=720984 print_time=1962.587 buffer_time=2.063 print_stall=0 extruder: target=200 temp=199.9 pwm=0.645
Stats 1959.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2321415 bytes_read=812665 bytes_retransmit=9 bytes_invalid=0 send_seq=52859 receive_seq=52859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=536363 sysload=0.22 cputime=129.373 memavail=720984 print_time=1963.930 buffer_time=2.406 print_stall=0 extruder: target=200 temp=200.0 pwm=0.645
Stats 1960.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2323825 bytes_read=813218 bytes_retransmit=9 bytes_invalid=0 send_seq=52907 receive_seq=52907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=43.6 mcu_temp: temp=38.8 sd_pos=536906 sysload=0.22 cputime=129.447 memavail=720732 print_time=1965.513 buffer_time=2.989 print_stall=0 extruder: target=200 temp=200.1 pwm=0.593
Stats 1961.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2325220 bytes_read=813681 bytes_retransmit=9 bytes_invalid=0 send_seq=52940 receive_seq=52940 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=537392 sysload=0.22 cputime=129.515 memavail=720732 print_time=1966.001 buffer_time=2.474 print_stall=0 extruder: target=200 temp=200.2 pwm=0.593
Stats 1962.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2327103 bytes_read=814176 bytes_retransmit=9 bytes_invalid=0 send_seq=52979 receive_seq=52979 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=538011 sysload=0.20 cputime=129.585 memavail=721004 print_time=1966.815 buffer_time=2.286 print_stall=0 extruder: target=200 temp=200.3 pwm=0.593
Stats 1963.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2328353 bytes_read=814634 bytes_retransmit=9 bytes_invalid=0 send_seq=53008 receive_seq=53008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=538329 sysload=0.20 cputime=129.653 memavail=721004 print_time=1967.580 buffer_time=2.048 print_stall=0 extruder: target=200 temp=200.3 pwm=0.593
Stats 1964.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2331054 bytes_read=815197 bytes_retransmit=9 bytes_invalid=0 send_seq=53061 receive_seq=53061 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=539176 sysload=0.20 cputime=129.729 memavail=721004 print_time=1968.999 buffer_time=2.464 print_stall=0 extruder: target=200 temp=200.3 pwm=0.620
Stats 1965.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2332920 bytes_read=815676 bytes_retransmit=9 bytes_invalid=0 send_seq=53100 receive_seq=53100 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=539757 sysload=0.20 cputime=129.798 memavail=721252 print_time=1969.866 buffer_time=2.330 print_stall=0 extruder: target=200 temp=200.3 pwm=0.620
Stats 1966.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2334234 bytes_read=816131 bytes_retransmit=9 bytes_invalid=0 send_seq=53130 receive_seq=53130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.437 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=540040 sysload=0.20 cputime=129.863 memavail=721044 print_time=1970.658 buffer_time=2.122 print_stall=0 extruder: target=200 temp=200.3 pwm=0.620
Stats 1967.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2335675 bytes_read=816599 bytes_retransmit=9 bytes_invalid=0 send_seq=53163 receive_seq=53163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.5 mcu_temp: temp=38.8 sd_pos=540372 sysload=0.18 cputime=129.936 memavail=720800 print_time=1971.566 buffer_time=2.029 print_stall=0 extruder: target=200 temp=200.0 pwm=0.748
Stats 1968.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2338676 bytes_read=817177 bytes_retransmit=9 bytes_invalid=0 send_seq=53222 receive_seq=53222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.318 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=541147 sysload=0.18 cputime=130.013 memavail=720564 print_time=1973.024 buffer_time=2.487 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 1969.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2339954 bytes_read=817640 bytes_retransmit=9 bytes_invalid=0 send_seq=53252 receive_seq=53252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=541417 sysload=0.18 cputime=130.080 memavail=720844 print_time=1973.848 buffer_time=2.311 print_stall=0 extruder: target=200 temp=200.0 pwm=0.651
Stats 1970.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2340455 bytes_read=818023 bytes_retransmit=9 bytes_invalid=0 send_seq=53269 receive_seq=53269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=541486 sysload=0.18 cputime=130.141 memavail=720844 print_time=1974.712 buffer_time=2.173 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 1971.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2341870 bytes_read=818462 bytes_retransmit=9 bytes_invalid=0 send_seq=53300 receive_seq=53300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=541877 sysload=0.18 cputime=130.207 memavail=720872 print_time=1975.744 buffer_time=2.205 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 1972.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2342962 bytes_read=818930 bytes_retransmit=9 bytes_invalid=0 send_seq=53328 receive_seq=53328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.309 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=542137 sysload=0.49 cputime=130.275 memavail=720392 print_time=1976.556 buffer_time=2.016 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 1973.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2345128 bytes_read=819448 bytes_retransmit=9 bytes_invalid=0 send_seq=53372 receive_seq=53372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.463 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=542554 sysload=0.49 cputime=130.349 memavail=720164 print_time=1978.676 buffer_time=3.136 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 1974.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2345341 bytes_read=819812 bytes_retransmit=9 bytes_invalid=0 send_seq=53388 receive_seq=53388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996566 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=542554 sysload=0.49 cputime=130.408 memavail=720112 print_time=1978.676 buffer_time=2.136 print_stall=0 extruder: target=200 temp=199.9 pwm=0.666
Stats 1975.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2347542 bytes_read=820345 bytes_retransmit=9 bytes_invalid=0 send_seq=53432 receive_seq=53432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996566 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=542921 sysload=0.49 cputime=130.477 memavail=719864 print_time=1980.024 buffer_time=2.482 print_stall=0 extruder: target=200 temp=199.9 pwm=0.666
Stats 1976.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2349496 bytes_read=820848 bytes_retransmit=9 bytes_invalid=0 send_seq=53473 receive_seq=53473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=543328 sysload=0.49 cputime=130.544 memavail=719180 print_time=1981.086 buffer_time=2.543 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 1977.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2351312 bytes_read=821342 bytes_retransmit=9 bytes_invalid=0 send_seq=53512 receive_seq=53512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=543855 sysload=0.45 cputime=130.618 memavail=718928 print_time=1981.837 buffer_time=2.293 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 1978.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2352821 bytes_read=821825 bytes_retransmit=9 bytes_invalid=0 send_seq=53546 receive_seq=53546 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=544358 sysload=0.45 cputime=130.689 memavail=719308 print_time=1982.725 buffer_time=2.181 print_stall=0 extruder: target=200 temp=200.1 pwm=0.630
Stats 1979.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2355292 bytes_read=822384 bytes_retransmit=9 bytes_invalid=0 send_seq=53596 receive_seq=53596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.7 mcu_temp: temp=38.8 sd_pos=544799 sysload=0.45 cputime=130.761 memavail=719316 print_time=1984.023 buffer_time=2.478 print_stall=0 extruder: target=200 temp=200.0 pwm=0.630
Stats 1980.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2357009 bytes_read=822853 bytes_retransmit=9 bytes_invalid=0 send_seq=53633 receive_seq=53633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=44.3 mcu_temp: temp=38.7 sd_pos=544944 sysload=0.45 cputime=130.824 memavail=719568 print_time=1985.052 buffer_time=2.506 print_stall=0 extruder: target=200 temp=200.0 pwm=0.630
Stats 1981.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2358161 bytes_read=823311 bytes_retransmit=9 bytes_invalid=0 send_seq=53662 receive_seq=53662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.316 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=545074 sysload=0.45 cputime=130.887 memavail=719320 print_time=1985.678 buffer_time=2.132 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 1982.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2360144 bytes_read=823829 bytes_retransmit=9 bytes_invalid=0 send_seq=53703 receive_seq=53703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=44.3 mcu_temp: temp=38.7 sd_pos=545294 sysload=0.50 cputime=130.955 memavail=719832 print_time=1987.026 buffer_time=2.480 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 1983.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2361359 bytes_read=824253 bytes_retransmit=9 bytes_invalid=0 send_seq=53731 receive_seq=53731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=44.7 mcu_temp: temp=38.7 sd_pos=545428 sysload=0.50 cputime=131.016 memavail=719884 print_time=1987.742 buffer_time=2.194 print_stall=0 extruder: target=200 temp=199.9 pwm=0.680
Stats 1984.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2363163 bytes_read=824780 bytes_retransmit=9 bytes_invalid=0 send_seq=53771 receive_seq=53771 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996553 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=44.8 mcu_temp: temp=38.8 sd_pos=545942 sysload=0.50 cputime=131.085 memavail=719884 print_time=1988.871 buffer_time=2.323 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 1985.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2366175 bytes_read=825349 bytes_retransmit=9 bytes_invalid=0 send_seq=53828 receive_seq=53828 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=547140 sysload=0.50 cputime=131.169 memavail=720388 print_time=1990.186 buffer_time=2.637 print_stall=0 extruder: target=200 temp=200.0 pwm=0.675
Stats 1986.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2367493 bytes_read=825783 bytes_retransmit=9 bytes_invalid=0 send_seq=53858 receive_seq=53858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=547461 sysload=0.50 cputime=131.236 memavail=720388 print_time=1990.943 buffer_time=2.394 print_stall=0 extruder: target=200 temp=200.1 pwm=0.623
Stats 1987.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2368977 bytes_read=826300 bytes_retransmit=9 bytes_invalid=0 send_seq=53893 receive_seq=53893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=547888 sysload=0.54 cputime=131.306 memavail=720424 print_time=1991.841 buffer_time=2.290 print_stall=0 extruder: target=200 temp=200.0 pwm=0.626
Stats 1988.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2372091 bytes_read=826884 bytes_retransmit=9 bytes_invalid=0 send_seq=53953 receive_seq=53953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.6 mcu_temp: temp=38.7 sd_pos=548831 sysload=0.54 cputime=131.382 memavail=720428 print_time=1993.226 buffer_time=2.675 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 1989.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2373382 bytes_read=827313 bytes_retransmit=9 bytes_invalid=0 send_seq=53982 receive_seq=53982 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.6 mcu_temp: temp=38.7 sd_pos=549116 sysload=0.54 cputime=131.447 memavail=720180 print_time=1994.019 buffer_time=2.467 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 1990.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2374795 bytes_read=827800 bytes_retransmit=9 bytes_invalid=0 send_seq=54014 receive_seq=54014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.8 mcu_temp: temp=38.7 sd_pos=549446 sysload=0.54 cputime=131.512 memavail=720204 print_time=1994.922 buffer_time=2.369 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 1991.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2377853 bytes_read=828377 bytes_retransmit=9 bytes_invalid=0 send_seq=54073 receive_seq=54073 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=550259 sysload=0.54 cputime=131.585 memavail=720652 print_time=1996.390 buffer_time=2.837 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 1992.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2378546 bytes_read=828766 bytes_retransmit=9 bytes_invalid=0 send_seq=54093 receive_seq=54093 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=44.8 mcu_temp: temp=38.8 sd_pos=550453 sysload=0.57 cputime=131.649 memavail=719740 print_time=1996.584 buffer_time=2.031 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 1993.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2379656 bytes_read=829217 bytes_retransmit=9 bytes_invalid=0 send_seq=54119 receive_seq=54119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.283 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=550600 sysload=0.57 cputime=131.714 memavail=719488 print_time=1998.074 buffer_time=2.520 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 1994.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2381049 bytes_read=829661 bytes_retransmit=9 bytes_invalid=0 send_seq=54151 receive_seq=54151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=43.6 mcu_temp: temp=38.9 sd_pos=550956 sysload=0.57 cputime=131.780 memavail=718984 print_time=1999.104 buffer_time=2.550 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 1995.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2382155 bytes_read=830075 bytes_retransmit=9 bytes_invalid=0 send_seq=54177 receive_seq=54177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=551179 sysload=0.57 cputime=131.844 memavail=718744 print_time=1999.901 buffer_time=2.346 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 1996.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2384255 bytes_read=830612 bytes_retransmit=9 bytes_invalid=0 send_seq=54219 receive_seq=54219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=551534 sysload=0.57 cputime=131.919 memavail=718496 print_time=2002.021 buffer_time=3.465 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 1997.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2384428 bytes_read=830971 bytes_retransmit=9 bytes_invalid=0 send_seq=54231 receive_seq=54231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.348 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=551534 sysload=0.61 cputime=131.978 memavail=718460 print_time=2002.021 buffer_time=2.464 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 1998.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2385691 bytes_read=831405 bytes_retransmit=9 bytes_invalid=0 send_seq=54261 receive_seq=54261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=551695 sysload=0.61 cputime=132.041 memavail=718520 print_time=2002.668 buffer_time=2.111 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 1999.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2387631 bytes_read=831927 bytes_retransmit=9 bytes_invalid=0 send_seq=54300 receive_seq=54300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=552070 sysload=0.61 cputime=132.110 memavail=718524 print_time=2003.774 buffer_time=2.217 print_stall=0 extruder: target=200 temp=199.8 pwm=0.688
Stats 2000.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2389740 bytes_read=832421 bytes_retransmit=9 bytes_invalid=0 send_seq=54342 receive_seq=54342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=552669 sysload=0.61 cputime=132.179 memavail=718524 print_time=2004.787 buffer_time=2.229 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 2001.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2391717 bytes_read=832935 bytes_retransmit=9 bytes_invalid=0 send_seq=54385 receive_seq=54385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=553043 sysload=0.61 cputime=132.247 memavail=718524 print_time=2005.897 buffer_time=2.338 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 2002.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2393528 bytes_read=833452 bytes_retransmit=9 bytes_invalid=0 send_seq=54423 receive_seq=54423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=553480 sysload=0.56 cputime=132.318 memavail=719288 print_time=2006.747 buffer_time=2.188 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 2003.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2395474 bytes_read=833936 bytes_retransmit=9 bytes_invalid=0 send_seq=54463 receive_seq=54463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=553815 sysload=0.56 cputime=132.390 memavail=719004 print_time=2007.830 buffer_time=2.270 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 2004.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2397154 bytes_read=834420 bytes_retransmit=9 bytes_invalid=0 send_seq=54500 receive_seq=54500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.465 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=554307 sysload=0.56 cputime=132.457 memavail=719064 print_time=2008.891 buffer_time=2.331 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 2005.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2400234 bytes_read=835027 bytes_retransmit=9 bytes_invalid=0 send_seq=54559 receive_seq=54559 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=555447 sysload=0.56 cputime=132.534 memavail=719316 print_time=2010.212 buffer_time=2.651 print_stall=0 extruder: target=200 temp=199.9 pwm=0.674
Stats 2006.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2401517 bytes_read=835456 bytes_retransmit=9 bytes_invalid=0 send_seq=54588 receive_seq=54588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=555766 sysload=0.56 cputime=132.598 memavail=719316 print_time=2010.968 buffer_time=2.407 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2007.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2402997 bytes_read=835941 bytes_retransmit=9 bytes_invalid=0 send_seq=54622 receive_seq=54622 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=556192 sysload=0.51 cputime=132.664 memavail=719296 print_time=2011.862 buffer_time=2.301 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2008.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2406052 bytes_read=836543 bytes_retransmit=9 bytes_invalid=0 send_seq=54680 receive_seq=54680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=557197 sysload=0.51 cputime=132.739 memavail=719352 print_time=2013.246 buffer_time=2.684 print_stall=0 extruder: target=200 temp=200.1 pwm=0.646
Stats 2009.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2407352 bytes_read=836977 bytes_retransmit=9 bytes_invalid=0 send_seq=54710 receive_seq=54710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=557484 sysload=0.51 cputime=132.804 memavail=719584 print_time=2014.042 buffer_time=2.480 print_stall=0 extruder: target=200 temp=200.1 pwm=0.646
Stats 2010.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2408771 bytes_read=837436 bytes_retransmit=9 bytes_invalid=0 send_seq=54742 receive_seq=54742 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.6 mcu_temp: temp=38.8 sd_pos=557847 sysload=0.51 cputime=132.868 memavail=719352 print_time=2014.953 buffer_time=2.391 print_stall=0 extruder: target=200 temp=200.1 pwm=0.646
Stats 2011.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000049 bytes_write=2411748 bytes_read=838033 bytes_retransmit=9 bytes_invalid=0 send_seq=54799 receive_seq=54799 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=558628 sysload=0.51 cputime=132.940 memavail=719352 print_time=2016.414 buffer_time=2.851 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2012.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2412457 bytes_read=838432 bytes_retransmit=9 bytes_invalid=0 send_seq=54819 receive_seq=54819 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.327 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=558824 sysload=0.47 cputime=133.004 memavail=719380 print_time=2016.608 buffer_time=2.045 print_stall=0 extruder: target=200 temp=200.2 pwm=0.640
Stats 2013.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2413557 bytes_read=838861 bytes_retransmit=9 bytes_invalid=0 send_seq=54845 receive_seq=54845 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=558968 sysload=0.47 cputime=133.070 memavail=719416 print_time=2018.095 buffer_time=2.532 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2014.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2414304 bytes_read=839283 bytes_retransmit=9 bytes_invalid=0 send_seq=54867 receive_seq=54867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=44.5 mcu_temp: temp=38.6 sd_pos=559160 sysload=0.47 cputime=133.133 memavail=719416 print_time=2018.567 buffer_time=2.003 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2015.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2416073 bytes_read=839752 bytes_retransmit=9 bytes_invalid=0 send_seq=54904 receive_seq=54904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=559578 sysload=0.47 cputime=133.203 memavail=719416 print_time=2019.918 buffer_time=2.354 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2016.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=2418159 bytes_read=840261 bytes_retransmit=9 bytes_invalid=0 send_seq=54946 receive_seq=54946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.3 mcu_temp: temp=38.6 sd_pos=559926 sysload=0.47 cputime=133.275 memavail=718924 print_time=2022.050 buffer_time=3.485 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2017.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2418305 bytes_read=840637 bytes_retransmit=9 bytes_invalid=0 send_seq=54957 receive_seq=54957 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=559926 sysload=0.43 cputime=133.333 memavail=718924 print_time=2022.050 buffer_time=2.484 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 2018.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2419588 bytes_read=841061 bytes_retransmit=9 bytes_invalid=0 send_seq=54987 receive_seq=54987 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=560085 sysload=0.43 cputime=133.397 memavail=718532 print_time=2022.696 buffer_time=2.129 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 2019.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2421550 bytes_read=841555 bytes_retransmit=9 bytes_invalid=0 send_seq=55026 receive_seq=55026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=560489 sysload=0.43 cputime=133.467 memavail=718560 print_time=2023.817 buffer_time=2.249 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 2020.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2423674 bytes_read=842082 bytes_retransmit=9 bytes_invalid=0 send_seq=55069 receive_seq=55069 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.443 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=561083 sysload=0.43 cputime=133.537 memavail=718560 print_time=2024.854 buffer_time=2.287 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 2021.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2425609 bytes_read=842566 bytes_retransmit=9 bytes_invalid=0 send_seq=55109 receive_seq=55109 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=44.2 mcu_temp: temp=38.7 sd_pos=561419 sysload=0.43 cputime=133.607 memavail=718308 print_time=2025.952 buffer_time=2.384 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 2022.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2427622 bytes_read=843085 bytes_retransmit=9 bytes_invalid=0 send_seq=55150 receive_seq=55150 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=561887 sysload=0.40 cputime=133.680 memavail=718308 print_time=2026.857 buffer_time=2.288 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 2023.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2429536 bytes_read=843597 bytes_retransmit=9 bytes_invalid=0 send_seq=55190 receive_seq=55190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.444 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=562187 sysload=0.40 cputime=133.754 memavail=718092 print_time=2027.929 buffer_time=2.357 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 2024.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2431243 bytes_read=844061 bytes_retransmit=9 bytes_invalid=0 send_seq=55226 receive_seq=55226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=562646 sysload=0.40 cputime=133.822 memavail=718092 print_time=2028.980 buffer_time=2.407 print_stall=0 extruder: target=200 temp=199.8 pwm=0.689
Stats 2025.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2434264 bytes_read=844645 bytes_retransmit=9 bytes_invalid=0 send_seq=55283 receive_seq=55283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=563782 sysload=0.40 cputime=133.905 memavail=717868 print_time=2030.292 buffer_time=2.719 print_stall=0 extruder: target=200 temp=199.8 pwm=0.689
Stats 2026.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2435528 bytes_read=845107 bytes_retransmit=9 bytes_invalid=0 send_seq=55313 receive_seq=55313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=564092 sysload=0.40 cputime=133.974 memavail=717872 print_time=2031.046 buffer_time=2.472 print_stall=0 extruder: target=200 temp=199.9 pwm=0.689
Stats 2027.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2437011 bytes_read=845572 bytes_retransmit=9 bytes_invalid=0 send_seq=55346 receive_seq=55346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=564516 sysload=0.37 cputime=134.041 memavail=717380 print_time=2031.940 buffer_time=2.366 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 2028.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2440146 bytes_read=846166 bytes_retransmit=9 bytes_invalid=0 send_seq=55405 receive_seq=55405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=565491 sysload=0.37 cputime=134.119 memavail=717128 print_time=2033.320 buffer_time=2.744 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Stats 2029.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2441447 bytes_read=846638 bytes_retransmit=9 bytes_invalid=0 send_seq=55437 receive_seq=55437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.348 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=565808 sysload=0.37 cputime=134.186 memavail=717136 print_time=2034.119 buffer_time=2.544 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 2030.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2442905 bytes_read=847087 bytes_retransmit=9 bytes_invalid=0 send_seq=55470 receive_seq=55470 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=566169 sysload=0.37 cputime=134.254 memavail=716888 print_time=2035.026 buffer_time=2.451 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 2031.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2444238 bytes_read=847536 bytes_retransmit=9 bytes_invalid=0 send_seq=55500 receive_seq=55500 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.3 mcu_temp: temp=38.7 sd_pos=566527 sysload=0.37 cputime=134.318 memavail=716888 print_time=2035.587 buffer_time=2.010 print_stall=0 extruder: target=200 temp=200.1 pwm=0.618
Stats 2032.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2446544 bytes_read=848088 bytes_retransmit=9 bytes_invalid=0 send_seq=55545 receive_seq=55545 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.476 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=567113 sysload=0.74 cputime=134.389 memavail=716888 print_time=2036.695 buffer_time=2.117 print_stall=0 extruder: target=200 temp=200.1 pwm=0.669
Stats 2033.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2447664 bytes_read=848502 bytes_retransmit=9 bytes_invalid=0 send_seq=55572 receive_seq=55571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.343 raspberry_pi: temp=44.1 mcu_temp: temp=38.7 sd_pos=567257 sysload=0.74 cputime=134.455 memavail=716896 print_time=2038.180 buffer_time=2.600 print_stall=0 extruder: target=200 temp=200.1 pwm=0.669
Stats 2034.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2448416 bytes_read=848911 bytes_retransmit=9 bytes_invalid=0 send_seq=55593 receive_seq=55593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=567451 sysload=0.74 cputime=134.518 memavail=716904 print_time=2038.647 buffer_time=2.068 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 2035.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2450136 bytes_read=849398 bytes_retransmit=9 bytes_invalid=0 send_seq=55628 receive_seq=55628 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996624 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=567902 sysload=0.74 cputime=134.585 memavail=716664 print_time=2040.004 buffer_time=2.423 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 2036.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2452193 bytes_read=849887 bytes_retransmit=9 bytes_invalid=0 send_seq=55669 receive_seq=55669 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=568251 sysload=0.74 cputime=134.654 memavail=716664 print_time=2042.138 buffer_time=3.556 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 2037.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2452387 bytes_read=850261 bytes_retransmit=9 bytes_invalid=0 send_seq=55681 receive_seq=55681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=568251 sysload=0.68 cputime=134.713 memavail=716944 print_time=2042.138 buffer_time=2.555 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 2038.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2453618 bytes_read=850713 bytes_retransmit=9 bytes_invalid=0 send_seq=55709 receive_seq=55709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=568412 sysload=0.68 cputime=134.779 memavail=716992 print_time=2042.783 buffer_time=2.198 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 2039.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2455624 bytes_read=851202 bytes_retransmit=9 bytes_invalid=0 send_seq=55750 receive_seq=55750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.444 raspberry_pi: temp=44.6 mcu_temp: temp=38.7 sd_pos=568814 sysload=0.68 cputime=134.848 memavail=717216 print_time=2043.928 buffer_time=2.342 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 2040.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2457793 bytes_read=851737 bytes_retransmit=9 bytes_invalid=0 send_seq=55795 receive_seq=55795 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=569379 sysload=0.68 cputime=134.916 memavail=717280 print_time=2044.976 buffer_time=2.388 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 2041.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2459794 bytes_read=852254 bytes_retransmit=9 bytes_invalid=0 send_seq=55836 receive_seq=55836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=569750 sysload=0.68 cputime=134.983 memavail=717284 print_time=2046.125 buffer_time=2.535 print_stall=0 extruder: target=200 temp=200.0 pwm=0.640
Stats 2042.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2461953 bytes_read=852768 bytes_retransmit=9 bytes_invalid=0 send_seq=55879 receive_seq=55879 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=570218 sysload=0.62 cputime=135.052 memavail=717284 print_time=2047.074 buffer_time=2.482 print_stall=0 extruder: target=200 temp=200.0 pwm=0.640
Stats 2043.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2463043 bytes_read=853191 bytes_retransmit=9 bytes_invalid=0 send_seq=55906 receive_seq=55906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=570335 sysload=0.62 cputime=135.114 memavail=717032 print_time=2047.649 buffer_time=2.056 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2044.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2464762 bytes_read=853678 bytes_retransmit=9 bytes_invalid=0 send_seq=55942 receive_seq=55942 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=44.6 mcu_temp: temp=38.6 sd_pos=570737 sysload=0.62 cputime=135.179 memavail=717040 print_time=2048.969 buffer_time=2.375 print_stall=0 extruder: target=200 temp=200.0 pwm=0.640
Stats 2045.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2465488 bytes_read=854072 bytes_retransmit=9 bytes_invalid=0 send_seq=55964 receive_seq=55964 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=571111 sysload=0.62 cputime=135.242 memavail=717040 print_time=2049.741 buffer_time=2.145 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 2046.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2466698 bytes_read=854506 bytes_retransmit=9 bytes_invalid=0 send_seq=55991 receive_seq=55991 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=571284 sysload=0.62 cputime=135.306 memavail=717040 print_time=2050.883 buffer_time=2.286 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 2047.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2467580 bytes_read=854943 bytes_retransmit=9 bytes_invalid=0 send_seq=56013 receive_seq=56013 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=571858 sysload=0.57 cputime=135.375 memavail=717040 print_time=2051.772 buffer_time=2.174 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 2048.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2468798 bytes_read=855367 bytes_retransmit=9 bytes_invalid=0 send_seq=56041 receive_seq=56041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=572030 sysload=0.57 cputime=135.439 memavail=717040 print_time=2052.950 buffer_time=2.351 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 2049.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2469472 bytes_read=855761 bytes_retransmit=9 bytes_invalid=0 send_seq=56060 receive_seq=56060 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=572627 sysload=0.57 cputime=135.503 memavail=716812 print_time=2053.622 buffer_time=2.021 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 2050.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2470420 bytes_read=856193 bytes_retransmit=9 bytes_invalid=0 send_seq=56084 receive_seq=56084 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=572829 sysload=0.57 cputime=135.567 memavail=716560 print_time=2054.625 buffer_time=2.022 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 2051.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2471078 bytes_read=856587 bytes_retransmit=9 bytes_invalid=0 send_seq=56103 receive_seq=56103 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=572945 sysload=0.57 cputime=135.626 memavail=716292 print_time=2055.648 buffer_time=2.043 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 2052.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2471596 bytes_read=856961 bytes_retransmit=9 bytes_invalid=0 send_seq=56118 receive_seq=56118 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=573494 sysload=0.53 cputime=135.693 memavail=716320 print_time=2056.641 buffer_time=2.035 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 2053.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2472842 bytes_read=857413 bytes_retransmit=9 bytes_invalid=0 send_seq=56146 receive_seq=56146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.436 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=573850 sysload=0.53 cputime=135.762 memavail=715864 print_time=2058.755 buffer_time=3.148 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 2054.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2472999 bytes_read=857752 bytes_retransmit=9 bytes_invalid=0 send_seq=56157 receive_seq=56157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=44.8 mcu_temp: temp=38.8 sd_pos=573850 sysload=0.53 cputime=135.818 memavail=715876 print_time=2058.755 buffer_time=2.147 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 2055.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2475290 bytes_read=858295 bytes_retransmit=9 bytes_invalid=0 send_seq=56203 receive_seq=56203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=574218 sysload=0.53 cputime=135.885 memavail=715636 print_time=2060.129 buffer_time=2.519 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 2056.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2477560 bytes_read=858823 bytes_retransmit=9 bytes_invalid=0 send_seq=56249 receive_seq=56249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.456 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=574622 sysload=0.53 cputime=135.954 memavail=715836 print_time=2061.310 buffer_time=2.700 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 2057.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2478578 bytes_read=859247 bytes_retransmit=9 bytes_invalid=0 send_seq=56274 receive_seq=56274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=574949 sysload=0.48 cputime=136.018 memavail=715956 print_time=2061.636 buffer_time=2.025 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 2058.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2480646 bytes_read=859775 bytes_retransmit=9 bytes_invalid=0 send_seq=56317 receive_seq=56317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.309 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=575287 sysload=0.48 cputime=136.088 memavail=716156 print_time=2062.789 buffer_time=2.175 print_stall=0 extruder: target=200 temp=200.0 pwm=0.661
Stats 2059.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2483106 bytes_read=860313 bytes_retransmit=9 bytes_invalid=0 send_seq=56365 receive_seq=56365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=575769 sysload=0.48 cputime=136.159 memavail=716468 print_time=2063.794 buffer_time=2.180 print_stall=0 extruder: target=200 temp=200.0 pwm=0.661
Stats 2060.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2485309 bytes_read=860822 bytes_retransmit=9 bytes_invalid=0 send_seq=56410 receive_seq=56410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.317 raspberry_pi: temp=44.7 mcu_temp: temp=38.8 sd_pos=576081 sysload=0.48 cputime=136.224 memavail=716468 print_time=2065.140 buffer_time=2.525 print_stall=0 extruder: target=200 temp=199.9 pwm=0.661
Stats 2061.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2486412 bytes_read=861265 bytes_retransmit=9 bytes_invalid=0 send_seq=56436 receive_seq=56436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=576308 sysload=0.48 cputime=136.285 memavail=716092 print_time=2065.675 buffer_time=2.059 print_stall=0 extruder: target=200 temp=199.9 pwm=0.661
Stats 2062.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2489443 bytes_read=861869 bytes_retransmit=9 bytes_invalid=0 send_seq=56494 receive_seq=56494 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=44.8 mcu_temp: temp=38.9 sd_pos=576831 sysload=0.45 cputime=136.351 memavail=716292 print_time=2066.813 buffer_time=2.195 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 2063.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2491832 bytes_read=862388 bytes_retransmit=9 bytes_invalid=0 send_seq=56541 receive_seq=56541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=577208 sysload=0.45 cputime=136.423 memavail=715860 print_time=2068.245 buffer_time=2.624 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 2064.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2493639 bytes_read=862901 bytes_retransmit=9 bytes_invalid=0 send_seq=56581 receive_seq=56581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=577537 sysload=0.45 cputime=136.491 memavail=716648 print_time=2068.935 buffer_time=2.313 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 2065.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2496491 bytes_read=863474 bytes_retransmit=9 bytes_invalid=0 send_seq=56636 receive_seq=56636 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.8 mcu_temp: temp=38.8 sd_pos=578063 sysload=0.45 cputime=136.559 memavail=716160 print_time=2069.975 buffer_time=2.350 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 2066.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000052 bytes_write=2497660 bytes_read=863888 bytes_retransmit=9 bytes_invalid=0 send_seq=56662 receive_seq=56662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=578148 sysload=0.45 cputime=136.621 memavail=715656 print_time=2070.624 buffer_time=1.998 print_stall=0 extruder: target=200 temp=200.0 pwm=0.655
Stats 2067.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2499977 bytes_read=864441 bytes_retransmit=9 bytes_invalid=0 send_seq=56707 receive_seq=56707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=578641 sysload=0.41 cputime=136.687 memavail=716200 print_time=2071.890 buffer_time=2.262 print_stall=0 extruder: target=200 temp=200.0 pwm=0.655
Stats 2068.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2503007 bytes_read=865018 bytes_retransmit=9 bytes_invalid=0 send_seq=56764 receive_seq=56764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=579211 sysload=0.41 cputime=136.759 memavail=716452 print_time=2073.014 buffer_time=2.384 print_stall=0 extruder: target=200 temp=200.0 pwm=0.655
Stats 2069.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2504100 bytes_read=865417 bytes_retransmit=9 bytes_invalid=0 send_seq=56789 receive_seq=56789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.6 mcu_temp: temp=38.7 sd_pos=579296 sysload=0.41 cputime=136.821 memavail=715716 print_time=2073.672 buffer_time=2.041 print_stall=0 extruder: target=200 temp=200.1 pwm=0.655
Stats 2070.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2505853 bytes_read=865914 bytes_retransmit=9 bytes_invalid=0 send_seq=56826 receive_seq=56826 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=579676 sysload=0.41 cputime=136.887 memavail=715916 print_time=2074.723 buffer_time=2.091 print_stall=0 extruder: target=200 temp=200.1 pwm=0.633
Stats 2071.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2508894 bytes_read=866497 bytes_retransmit=9 bytes_invalid=0 send_seq=56883 receive_seq=56883 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=580202 sysload=0.41 cputime=136.955 memavail=715236 print_time=2075.859 buffer_time=2.227 print_stall=0 extruder: target=200 temp=200.2 pwm=0.633
Stats 2072.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2510653 bytes_read=866976 bytes_retransmit=9 bytes_invalid=0 send_seq=56920 receive_seq=56919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=580547 sysload=0.38 cputime=137.027 memavail=715992 print_time=2076.729 buffer_time=2.092 print_stall=0 extruder: target=200 temp=200.2 pwm=0.633
Stats 2073.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2511800 bytes_read=867419 bytes_retransmit=9 bytes_invalid=0 send_seq=56945 receive_seq=56945 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.379 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=580646 sysload=0.38 cputime=137.093 memavail=715492 print_time=2077.828 buffer_time=2.191 print_stall=0 extruder: target=200 temp=200.2 pwm=0.633
Stats 2074.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2512597 bytes_read=867827 bytes_retransmit=9 bytes_invalid=0 send_seq=56967 receive_seq=56967 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=580703 sysload=0.38 cputime=137.157 memavail=715448 print_time=2078.695 buffer_time=2.057 print_stall=0 extruder: target=200 temp=200.3 pwm=0.609
Stats 2075.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2513544 bytes_read=868226 bytes_retransmit=9 bytes_invalid=0 send_seq=56990 receive_seq=56990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=580802 sysload=0.38 cputime=137.222 memavail=715124 print_time=2079.641 buffer_time=2.001 print_stall=0 extruder: target=200 temp=200.3 pwm=0.609
Stats 2076.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2514777 bytes_read=868679 bytes_retransmit=9 bytes_invalid=0 send_seq=57018 receive_seq=57018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=580927 sysload=0.38 cputime=137.289 memavail=714380 print_time=2081.040 buffer_time=2.397 print_stall=0 extruder: target=200 temp=200.2 pwm=0.609
Stats 2077.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2515945 bytes_read=869122 bytes_retransmit=9 bytes_invalid=0 send_seq=57044 receive_seq=57044 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.1 pwm=0.119 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=581033 sysload=0.35 cputime=137.359 memavail=714956 print_time=2082.418 buffer_time=2.773 print_stall=0 extruder: target=200 temp=200.2 pwm=0.609
Stats 2078.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2516473 bytes_read=869496 bytes_retransmit=9 bytes_invalid=0 send_seq=57062 receive_seq=57062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.440 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=581100 sysload=0.35 cputime=137.425 memavail=714716 print_time=2083.282 buffer_time=2.636 print_stall=0 extruder: target=200 temp=200.1 pwm=0.670
Stats 2079.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2516808 bytes_read=869869 bytes_retransmit=9 bytes_invalid=0 send_seq=57074 receive_seq=57074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=581131 sysload=0.35 cputime=137.493 memavail=714476 print_time=2084.102 buffer_time=2.455 print_stall=0 extruder: target=200 temp=200.1 pwm=0.670
Stats 2080.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2518011 bytes_read=870302 bytes_retransmit=9 bytes_invalid=0 send_seq=57101 receive_seq=57101 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.417 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=581258 sysload=0.35 cputime=137.561 memavail=714484 print_time=2086.182 buffer_time=3.534 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 2081.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2518184 bytes_read=870646 bytes_retransmit=9 bytes_invalid=0 send_seq=57113 receive_seq=57113 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=581258 sysload=0.35 cputime=137.624 memavail=714736 print_time=2086.182 buffer_time=2.533 print_stall=0 extruder: target=200 temp=199.9 pwm=0.670
Stats 2082.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2519471 bytes_read=871138 bytes_retransmit=9 bytes_invalid=0 send_seq=57143 receive_seq=57143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=581416 sysload=0.32 cputime=137.696 memavail=714696 print_time=2086.827 buffer_time=2.176 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 2083.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2521601 bytes_read=871637 bytes_retransmit=9 bytes_invalid=0 send_seq=57186 receive_seq=57186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=581818 sysload=0.32 cputime=137.771 memavail=714752 print_time=2087.996 buffer_time=2.343 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 2084.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2523858 bytes_read=872151 bytes_retransmit=9 bytes_invalid=0 send_seq=57232 receive_seq=57232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=582383 sysload=0.32 cputime=137.855 memavail=714028 print_time=2089.079 buffer_time=2.425 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 2085.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2525888 bytes_read=872683 bytes_retransmit=9 bytes_invalid=0 send_seq=57273 receive_seq=57273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=582755 sysload=0.32 cputime=137.931 memavail=713808 print_time=2090.227 buffer_time=2.571 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 2086.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2528128 bytes_read=873187 bytes_retransmit=9 bytes_invalid=0 send_seq=57317 receive_seq=57317 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=583225 sysload=0.32 cputime=138.006 memavail=713832 print_time=2091.172 buffer_time=2.515 print_stall=0 extruder: target=200 temp=199.8 pwm=0.681
Stats 2087.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2529546 bytes_read=873656 bytes_retransmit=9 bytes_invalid=0 send_seq=57348 receive_seq=57348 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=583355 sysload=0.29 cputime=138.077 memavail=714660 print_time=2091.976 buffer_time=2.319 print_stall=0 extruder: target=200 temp=199.7 pwm=0.681
Stats 2088.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2531084 bytes_read=874128 bytes_retransmit=9 bytes_invalid=0 send_seq=57380 receive_seq=57380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.4 mcu_temp: temp=38.7 sd_pos=583582 sysload=0.29 cputime=138.153 memavail=714156 print_time=2093.155 buffer_time=2.495 print_stall=0 extruder: target=200 temp=199.8 pwm=0.681
Stats 2089.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2532600 bytes_read=874582 bytes_retransmit=9 bytes_invalid=0 send_seq=57414 receive_seq=57414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=583819 sysload=0.29 cputime=138.229 memavail=714112 print_time=2093.816 buffer_time=2.154 print_stall=0 extruder: target=200 temp=199.8 pwm=0.681
Stats 2090.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2535636 bytes_read=875176 bytes_retransmit=9 bytes_invalid=0 send_seq=57473 receive_seq=57473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=43.6 mcu_temp: temp=38.9 sd_pos=584390 sysload=0.29 cputime=138.310 memavail=713880 print_time=2094.977 buffer_time=2.314 print_stall=0 extruder: target=200 temp=199.8 pwm=0.670
Stats 2091.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2537452 bytes_read=875678 bytes_retransmit=9 bytes_invalid=0 send_seq=57511 receive_seq=57511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=584596 sysload=0.29 cputime=138.383 memavail=713988 print_time=2096.111 buffer_time=2.447 print_stall=0 extruder: target=200 temp=199.8 pwm=0.670
Stats 2092.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2539184 bytes_read=876162 bytes_retransmit=9 bytes_invalid=0 send_seq=57548 receive_seq=57548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=43.6 mcu_temp: temp=38.8 sd_pos=584920 sysload=0.27 cputime=138.456 memavail=714240 print_time=2096.874 buffer_time=2.205 print_stall=0 extruder: target=200 temp=199.8 pwm=0.670
Stats 2093.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2541977 bytes_read=876741 bytes_retransmit=9 bytes_invalid=0 send_seq=57604 receive_seq=57604 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=585443 sysload=0.27 cputime=138.536 memavail=714492 print_time=2097.921 buffer_time=2.251 print_stall=0 extruder: target=200 temp=199.9 pwm=0.670
Stats 2094.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2543567 bytes_read=877212 bytes_retransmit=9 bytes_invalid=0 send_seq=57638 receive_seq=57638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=167996566 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=585631 sysload=0.27 cputime=138.610 memavail=713988 print_time=2099.070 buffer_time=2.399 print_stall=0 extruder: target=200 temp=199.9 pwm=0.643
Stats 2095.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2545330 bytes_read=877679 bytes_retransmit=9 bytes_invalid=0 send_seq=57676 receive_seq=57676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.310 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=585958 sysload=0.27 cputime=138.683 memavail=714384 print_time=2099.841 buffer_time=2.170 print_stall=0 extruder: target=200 temp=200.0 pwm=0.643
Stats 2096.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2548109 bytes_read=878253 bytes_retransmit=9 bytes_invalid=0 send_seq=57731 receive_seq=57731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=586483 sysload=0.27 cputime=138.759 memavail=714584 print_time=2100.869 buffer_time=2.197 print_stall=0 extruder: target=200 temp=200.0 pwm=0.643
Stats 2097.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2549781 bytes_read=878760 bytes_retransmit=9 bytes_invalid=0 send_seq=57767 receive_seq=57767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.305 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=586639 sysload=0.33 cputime=138.836 memavail=715452 print_time=2101.985 buffer_time=2.311 print_stall=0 extruder: target=200 temp=200.1 pwm=0.643
Stats 2098.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2551715 bytes_read=879244 bytes_retransmit=9 bytes_invalid=0 send_seq=57808 receive_seq=57807 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=586999 sysload=0.33 cputime=138.907 memavail=714948 print_time=2102.860 buffer_time=2.184 print_stall=0 extruder: target=200 temp=200.1 pwm=0.643
Stats 2099.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2554442 bytes_read=879824 bytes_retransmit=9 bytes_invalid=0 send_seq=57861 receive_seq=57861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=587507 sysload=0.33 cputime=138.985 memavail=714872 print_time=2103.883 buffer_time=2.203 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2100.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2555979 bytes_read=880286 bytes_retransmit=9 bytes_invalid=0 send_seq=57891 receive_seq=57891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=43.6 mcu_temp: temp=38.9 sd_pos=587784 sysload=0.33 cputime=139.058 memavail=714460 print_time=2104.805 buffer_time=2.122 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2101.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2556803 bytes_read=880675 bytes_retransmit=9 bytes_invalid=0 send_seq=57912 receive_seq=57912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=43.8 mcu_temp: temp=38.9 sd_pos=587846 sysload=0.33 cputime=139.129 memavail=714440 print_time=2105.693 buffer_time=2.006 print_stall=0 extruder: target=200 temp=200.0 pwm=0.647
Stats 2102.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=2558029 bytes_read=881124 bytes_retransmit=9 bytes_invalid=0 send_seq=57939 receive_seq=57939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=587971 sysload=0.38 cputime=139.200 memavail=714492 print_time=2107.055 buffer_time=2.366 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2103.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=2559153 bytes_read=881561 bytes_retransmit=9 bytes_invalid=0 send_seq=57964 receive_seq=57964 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=588058 sysload=0.38 cputime=139.270 memavail=714452 print_time=2108.398 buffer_time=2.705 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 2104.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=2559772 bytes_read=881930 bytes_retransmit=9 bytes_invalid=0 send_seq=57981 receive_seq=57981 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=588126 sysload=0.38 cputime=139.339 memavail=714272 print_time=2108.904 buffer_time=2.210 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 2105.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=2560894 bytes_read=882359 bytes_retransmit=9 bytes_invalid=0 send_seq=58007 receive_seq=58007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=588232 sysload=0.38 cputime=139.409 memavail=714272 print_time=2110.283 buffer_time=2.586 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 2106.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=2561385 bytes_read=882761 bytes_retransmit=9 bytes_invalid=0 send_seq=58022 receive_seq=58022 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=588300 sysload=0.38 cputime=139.477 memavail=714472 print_time=2111.146 buffer_time=2.446 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 2107.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2561757 bytes_read=883120 bytes_retransmit=9 bytes_invalid=0 send_seq=58037 receive_seq=58037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=588331 sysload=0.51 cputime=139.544 memavail=714536 print_time=2111.966 buffer_time=2.264 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2108.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2562942 bytes_read=883554 bytes_retransmit=9 bytes_invalid=0 send_seq=58064 receive_seq=58064 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.313 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=588458 sysload=0.51 cputime=139.616 memavail=714484 print_time=2114.045 buffer_time=3.340 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2109.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2563126 bytes_read=883926 bytes_retransmit=9 bytes_invalid=0 send_seq=58076 receive_seq=58076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=588458 sysload=0.51 cputime=139.683 memavail=714200 print_time=2114.045 buffer_time=2.332 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2110.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2565326 bytes_read=884430 bytes_retransmit=9 bytes_invalid=0 send_seq=58120 receive_seq=58120 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=588823 sysload=0.51 cputime=139.759 memavail=714808 print_time=2115.383 buffer_time=2.669 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2111.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2566453 bytes_read=884888 bytes_retransmit=9 bytes_invalid=0 send_seq=58146 receive_seq=58146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=589023 sysload=0.51 cputime=139.832 memavail=715084 print_time=2115.831 buffer_time=2.115 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 2112.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2568591 bytes_read=885401 bytes_retransmit=9 bytes_invalid=0 send_seq=58189 receive_seq=58189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=589586 sysload=0.63 cputime=139.908 memavail=714828 print_time=2116.873 buffer_time=2.155 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 2113.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2570485 bytes_read=885870 bytes_retransmit=9 bytes_invalid=0 send_seq=58226 receive_seq=58226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=589959 sysload=0.63 cputime=139.982 memavail=714828 print_time=2117.991 buffer_time=2.269 print_stall=0 extruder: target=200 temp=199.9 pwm=0.653
Stats 2114.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2572558 bytes_read=886393 bytes_retransmit=9 bytes_invalid=0 send_seq=58268 receive_seq=58268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=590429 sysload=0.63 cputime=140.058 memavail=714540 print_time=2118.902 buffer_time=2.177 print_stall=0 extruder: target=200 temp=199.9 pwm=0.712
Stats 2115.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2574458 bytes_read=886886 bytes_retransmit=9 bytes_invalid=0 send_seq=58307 receive_seq=58307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.6 mcu_temp: temp=38.9 sd_pos=590647 sysload=0.63 cputime=140.132 memavail=714884 print_time=2120.189 buffer_time=2.461 print_stall=0 extruder: target=200 temp=199.8 pwm=0.712
Stats 2116.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2576026 bytes_read=887340 bytes_retransmit=9 bytes_invalid=0 send_seq=58341 receive_seq=58341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.304 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=590939 sysload=0.63 cputime=140.202 memavail=714908 print_time=2120.881 buffer_time=2.150 print_stall=0 extruder: target=200 temp=199.8 pwm=0.712
Stats 2117.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2579165 bytes_read=887968 bytes_retransmit=9 bytes_invalid=0 send_seq=58401 receive_seq=58401 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.7 mcu_temp: temp=38.8 sd_pos=591511 sysload=0.66 cputime=140.283 memavail=714208 print_time=2122.039 buffer_time=2.306 print_stall=0 extruder: target=200 temp=199.8 pwm=0.712
Stats 2118.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2580941 bytes_read=888451 bytes_retransmit=9 bytes_invalid=0 send_seq=58438 receive_seq=58438 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=591720 sysload=0.66 cputime=140.354 memavail=713964 print_time=2123.179 buffer_time=2.442 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 2119.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2582985 bytes_read=888941 bytes_retransmit=9 bytes_invalid=0 send_seq=58480 receive_seq=58480 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=592044 sysload=0.66 cputime=140.425 memavail=713968 print_time=2123.966 buffer_time=2.227 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 2120.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2585804 bytes_read=889507 bytes_retransmit=9 bytes_invalid=0 send_seq=58533 receive_seq=58533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.417 raspberry_pi: temp=44.3 mcu_temp: temp=38.9 sd_pos=592509 sysload=0.66 cputime=140.501 memavail=713756 print_time=2125.102 buffer_time=2.360 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 2121.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2586908 bytes_read=889934 bytes_retransmit=9 bytes_invalid=0 send_seq=58559 receive_seq=58559 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=44.6 mcu_temp: temp=38.9 sd_pos=592617 sysload=0.66 cputime=140.571 memavail=713756 print_time=2125.739 buffer_time=1.995 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 2122.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2589381 bytes_read=890473 bytes_retransmit=9 bytes_invalid=0 send_seq=58607 receive_seq=58607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.9 mcu_temp: temp=39.0 sd_pos=593073 sysload=0.61 cputime=140.648 memavail=713516 print_time=2126.900 buffer_time=2.152 print_stall=0 extruder: target=200 temp=200.1 pwm=0.609
Stats 2123.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2592082 bytes_read=891055 bytes_retransmit=9 bytes_invalid=0 send_seq=58658 receive_seq=58658 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=593542 sysload=0.61 cputime=140.723 memavail=713264 print_time=2127.993 buffer_time=2.241 print_stall=0 extruder: target=200 temp=200.1 pwm=0.609
Stats 2124.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2593585 bytes_read=891494 bytes_retransmit=9 bytes_invalid=0 send_seq=58689 receive_seq=58689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.9 mcu_temp: temp=39.1 sd_pos=593715 sysload=0.61 cputime=140.791 memavail=713292 print_time=2129.005 buffer_time=2.251 print_stall=0 extruder: target=200 temp=200.2 pwm=0.609
Stats 2125.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2596702 bytes_read=892073 bytes_retransmit=9 bytes_invalid=0 send_seq=58748 receive_seq=58748 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=45.7 mcu_temp: temp=38.9 sd_pos=594309 sysload=0.61 cputime=140.866 memavail=713336 print_time=2130.324 buffer_time=2.570 print_stall=0 extruder: target=200 temp=200.3 pwm=0.609
Stats 2126.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2598179 bytes_read=892560 bytes_retransmit=9 bytes_invalid=0 send_seq=58780 receive_seq=58780 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.9 mcu_temp: temp=39.0 sd_pos=594569 sysload=0.61 cputime=140.934 memavail=713344 print_time=2130.785 buffer_time=2.030 print_stall=0 extruder: target=200 temp=200.3 pwm=0.632
Stats 2127.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2600055 bytes_read=893044 bytes_retransmit=9 bytes_invalid=0 send_seq=58817 receive_seq=58817 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.9 mcu_temp: temp=38.9 sd_pos=594856 sysload=0.56 cputime=141.008 memavail=713652 print_time=2132.113 buffer_time=2.358 print_stall=0 extruder: target=200 temp=200.2 pwm=0.632
Stats 2128.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2601212 bytes_read=893458 bytes_retransmit=9 bytes_invalid=0 send_seq=58843 receive_seq=58843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.299 raspberry_pi: temp=45.2 mcu_temp: temp=39.0 sd_pos=594944 sysload=0.56 cputime=141.073 memavail=713652 print_time=2133.420 buffer_time=2.664 print_stall=0 extruder: target=200 temp=200.2 pwm=0.632
Stats 2129.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2601857 bytes_read=893875 bytes_retransmit=9 bytes_invalid=0 send_seq=58861 receive_seq=58861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=595012 sysload=0.56 cputime=141.137 memavail=713652 print_time=2133.915 buffer_time=2.158 print_stall=0 extruder: target=200 temp=200.1 pwm=0.695
Stats 2130.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2602952 bytes_read=894284 bytes_retransmit=9 bytes_invalid=0 send_seq=58886 receive_seq=58886 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.8 mcu_temp: temp=39.0 sd_pos=595100 sysload=0.56 cputime=141.202 memavail=713652 print_time=2135.257 buffer_time=2.500 print_stall=0 extruder: target=200 temp=200.1 pwm=0.695
Stats 2131.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2603562 bytes_read=894673 bytes_retransmit=9 bytes_invalid=0 send_seq=58904 receive_seq=58904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.9 mcu_temp: temp=39.2 sd_pos=595167 sysload=0.56 cputime=141.263 memavail=713652 print_time=2135.764 buffer_time=2.004 print_stall=0 extruder: target=200 temp=200.0 pwm=0.695
Stats 2132.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=2604664 bytes_read=895125 bytes_retransmit=9 bytes_invalid=0 send_seq=58929 receive_seq=58929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=595271 sysload=0.51 cputime=141.326 memavail=713660 print_time=2137.143 buffer_time=2.382 print_stall=0 extruder: target=200 temp=200.1 pwm=0.619
Stats 2133.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=2605182 bytes_read=895489 bytes_retransmit=9 bytes_invalid=0 send_seq=58945 receive_seq=58945 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=44.9 mcu_temp: temp=38.9 sd_pos=595339 sysload=0.51 cputime=141.389 memavail=714200 print_time=2138.006 buffer_time=2.244 print_stall=0 extruder: target=200 temp=200.1 pwm=0.619
Stats 2134.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=2605522 bytes_read=895853 bytes_retransmit=9 bytes_invalid=0 send_seq=58958 receive_seq=58958 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=595369 sysload=0.51 cputime=141.451 memavail=714256 print_time=2138.826 buffer_time=2.063 print_stall=0 extruder: target=200 temp=200.2 pwm=0.619
Stats 2135.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=2606714 bytes_read=896300 bytes_retransmit=9 bytes_invalid=0 send_seq=58985 receive_seq=58985 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.8 mcu_temp: temp=38.8 sd_pos=595492 sysload=0.51 cputime=141.515 memavail=714792 print_time=2140.904 buffer_time=3.140 print_stall=0 extruder: target=200 temp=200.1 pwm=0.619
Stats 2136.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=2606866 bytes_read=896634 bytes_retransmit=9 bytes_invalid=0 send_seq=58995 receive_seq=58995 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.317 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=595492 sysload=0.51 cputime=141.573 memavail=715044 print_time=2140.904 buffer_time=2.138 print_stall=0 extruder: target=200 temp=200.1 pwm=0.619
Stats 2137.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2609112 bytes_read=897168 bytes_retransmit=9 bytes_invalid=0 send_seq=59039 receive_seq=59039 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=595886 sysload=0.47 cputime=141.645 memavail=715644 print_time=2142.269 buffer_time=2.501 print_stall=0 extruder: target=200 temp=200.1 pwm=0.659
Stats 2138.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2611189 bytes_read=897690 bytes_retransmit=9 bytes_invalid=0 send_seq=59081 receive_seq=59081 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=596286 sysload=0.47 cputime=141.714 memavail=715416 print_time=2143.356 buffer_time=2.587 print_stall=0 extruder: target=200 temp=200.0 pwm=0.659
Stats 2139.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2613290 bytes_read=898184 bytes_retransmit=9 bytes_invalid=0 send_seq=59123 receive_seq=59123 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=596839 sysload=0.47 cputime=141.783 memavail=715736 print_time=2144.215 buffer_time=2.444 print_stall=0 extruder: target=200 temp=200.0 pwm=0.659
Stats 2140.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2614394 bytes_read=898608 bytes_retransmit=9 bytes_invalid=0 send_seq=59148 receive_seq=59148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.295 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=597076 sysload=0.47 cputime=141.847 memavail=715632 print_time=2144.880 buffer_time=2.108 print_stall=0 extruder: target=200 temp=199.9 pwm=0.659
Stats 2141.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2616513 bytes_read=899130 bytes_retransmit=9 bytes_invalid=0 send_seq=59190 receive_seq=59190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=597480 sysload=0.47 cputime=141.915 memavail=715632 print_time=2145.948 buffer_time=2.175 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 2142.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2618241 bytes_read=899604 bytes_retransmit=9 bytes_invalid=0 send_seq=59225 receive_seq=59225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=597697 sysload=0.43 cputime=141.979 memavail=715380 print_time=2147.049 buffer_time=2.275 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 2143.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2620045 bytes_read=900083 bytes_retransmit=9 bytes_invalid=0 send_seq=59261 receive_seq=59261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=43.7 mcu_temp: temp=38.7 sd_pos=598025 sysload=0.43 cputime=142.044 memavail=715384 print_time=2147.863 buffer_time=2.088 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 2144.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2622712 bytes_read=900650 bytes_retransmit=9 bytes_invalid=0 send_seq=59312 receive_seq=59312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=44.3 mcu_temp: temp=39.2 sd_pos=598500 sysload=0.43 cputime=142.113 memavail=715384 print_time=2148.984 buffer_time=2.207 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 2145.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2624669 bytes_read=901125 bytes_retransmit=9 bytes_invalid=0 send_seq=59352 receive_seq=59352 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.300 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=598794 sysload=0.43 cputime=142.180 memavail=715676 print_time=2150.227 buffer_time=2.449 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 2146.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2627519 bytes_read=901697 bytes_retransmit=9 bytes_invalid=0 send_seq=59408 receive_seq=59408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=599323 sysload=0.43 cputime=142.248 memavail=715876 print_time=2151.333 buffer_time=2.553 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 2147.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2628701 bytes_read=902154 bytes_retransmit=9 bytes_invalid=0 send_seq=59434 receive_seq=59434 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=599494 sysload=0.40 cputime=142.313 memavail=715976 print_time=2151.812 buffer_time=2.030 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 2148.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2630571 bytes_read=902628 bytes_retransmit=9 bytes_invalid=0 send_seq=59472 receive_seq=59472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=599761 sysload=0.40 cputime=142.381 memavail=715456 print_time=2153.050 buffer_time=2.267 print_stall=0 extruder: target=200 temp=200.0 pwm=0.620
Stats 2149.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2633395 bytes_read=903197 bytes_retransmit=9 bytes_invalid=0 send_seq=59526 receive_seq=59526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=600293 sysload=0.40 cputime=142.451 memavail=715992 print_time=2154.151 buffer_time=2.365 print_stall=0 extruder: target=200 temp=200.1 pwm=0.620
Stats 2150.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2635202 bytes_read=903689 bytes_retransmit=9 bytes_invalid=0 send_seq=59562 receive_seq=59562 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=43.8 mcu_temp: temp=38.9 sd_pos=600500 sysload=0.40 cputime=142.521 memavail=716240 print_time=2155.063 buffer_time=2.274 print_stall=0 extruder: target=200 temp=200.1 pwm=0.620
Stats 2151.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2636879 bytes_read=904143 bytes_retransmit=9 bytes_invalid=0 send_seq=59596 receive_seq=59596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.343 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=600715 sysload=0.40 cputime=142.588 memavail=716800 print_time=2156.252 buffer_time=2.462 print_stall=0 extruder: target=200 temp=200.1 pwm=0.620
Stats 2152.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2638512 bytes_read=904627 bytes_retransmit=9 bytes_invalid=0 send_seq=59630 receive_seq=59630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=601041 sysload=0.37 cputime=142.654 memavail=716836 print_time=2156.953 buffer_time=2.162 print_stall=0 extruder: target=200 temp=200.2 pwm=0.617
Stats 2153.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2641152 bytes_read=905204 bytes_retransmit=9 bytes_invalid=0 send_seq=59683 receive_seq=59683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=601531 sysload=0.37 cputime=142.724 memavail=716832 print_time=2157.962 buffer_time=2.170 print_stall=0 extruder: target=200 temp=200.1 pwm=0.677
Stats 2154.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2642663 bytes_read=905648 bytes_retransmit=9 bytes_invalid=0 send_seq=59715 receive_seq=59715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=601783 sysload=0.37 cputime=142.792 memavail=717088 print_time=2158.832 buffer_time=2.038 print_stall=0 extruder: target=200 temp=200.1 pwm=0.677
Stats 2155.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2644129 bytes_read=906113 bytes_retransmit=9 bytes_invalid=0 send_seq=59746 receive_seq=59746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=601902 sysload=0.37 cputime=142.857 memavail=717084 print_time=2160.643 buffer_time=2.849 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 2156.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2644725 bytes_read=906510 bytes_retransmit=9 bytes_invalid=0 send_seq=59763 receive_seq=59763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=601972 sysload=0.37 cputime=142.919 memavail=717100 print_time=2161.153 buffer_time=2.357 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 2157.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2645808 bytes_read=906930 bytes_retransmit=9 bytes_invalid=0 send_seq=59787 receive_seq=59787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=602060 sysload=0.34 cputime=142.981 memavail=717420 print_time=2162.540 buffer_time=2.744 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 2158.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2646429 bytes_read=907319 bytes_retransmit=9 bytes_invalid=0 send_seq=59805 receive_seq=59805 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=602130 sysload=0.34 cputime=143.041 memavail=717172 print_time=2163.062 buffer_time=2.265 print_stall=0 extruder: target=200 temp=200.0 pwm=0.647
Stats 2159.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2647513 bytes_read=907761 bytes_retransmit=9 bytes_invalid=0 send_seq=59831 receive_seq=59831 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.330 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=602236 sysload=0.34 cputime=143.104 memavail=717172 print_time=2164.487 buffer_time=2.689 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2160.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2648004 bytes_read=908120 bytes_retransmit=9 bytes_invalid=0 send_seq=59846 receive_seq=59846 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=602303 sysload=0.34 cputime=143.167 memavail=717172 print_time=2165.350 buffer_time=2.547 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2161.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2648328 bytes_read=908494 bytes_retransmit=9 bytes_invalid=0 send_seq=59858 receive_seq=59858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=602334 sysload=0.34 cputime=143.232 memavail=716676 print_time=2166.170 buffer_time=2.367 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2162.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2649528 bytes_read=908941 bytes_retransmit=9 bytes_invalid=0 send_seq=59885 receive_seq=59885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=602459 sysload=0.31 cputime=143.295 memavail=716876 print_time=2168.247 buffer_time=3.443 print_stall=0 extruder: target=200 temp=200.1 pwm=0.630
Stats 2163.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2649669 bytes_read=909275 bytes_retransmit=9 bytes_invalid=0 send_seq=59895 receive_seq=59895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=602459 sysload=0.31 cputime=143.352 memavail=717188 print_time=2168.247 buffer_time=2.442 print_stall=0 extruder: target=200 temp=200.1 pwm=0.630
Stats 2164.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2650911 bytes_read=909709 bytes_retransmit=9 bytes_invalid=0 send_seq=59922 receive_seq=59922 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=602622 sysload=0.31 cputime=143.413 memavail=717192 print_time=2168.898 buffer_time=2.091 print_stall=0 extruder: target=200 temp=200.0 pwm=0.681
Stats 2165.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2652857 bytes_read=910216 bytes_retransmit=9 bytes_invalid=0 send_seq=59961 receive_seq=59961 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=602993 sysload=0.31 cputime=143.481 memavail=716940 print_time=2170.007 buffer_time=2.200 print_stall=0 extruder: target=200 temp=200.0 pwm=0.681
Stats 2166.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2654852 bytes_read=910705 bytes_retransmit=9 bytes_invalid=0 send_seq=60002 receive_seq=60002 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=603561 sysload=0.31 cputime=143.550 memavail=716688 print_time=2171.003 buffer_time=2.194 print_stall=0 extruder: target=200 temp=200.0 pwm=0.681
Stats 2167.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2656746 bytes_read=911228 bytes_retransmit=9 bytes_invalid=0 send_seq=60041 receive_seq=60041 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.429 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=603963 sysload=0.37 cputime=143.618 memavail=716472 print_time=2172.118 buffer_time=2.307 print_stall=0 extruder: target=200 temp=199.9 pwm=0.681
Stats 2168.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2658519 bytes_read=911711 bytes_retransmit=9 bytes_invalid=0 send_seq=60078 receive_seq=60078 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=604535 sysload=0.37 cputime=143.685 memavail=716472 print_time=2172.873 buffer_time=2.061 print_stall=0 extruder: target=200 temp=199.8 pwm=0.715
Stats 2169.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2660111 bytes_read=912155 bytes_retransmit=9 bytes_invalid=0 send_seq=60110 receive_seq=60110 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=604793 sysload=0.37 cputime=143.752 memavail=717004 print_time=2174.037 buffer_time=2.224 print_stall=0 extruder: target=200 temp=199.8 pwm=0.715
Stats 2170.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2661202 bytes_read=912592 bytes_retransmit=9 bytes_invalid=0 send_seq=60136 receive_seq=60136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=604881 sysload=0.37 cputime=143.815 memavail=716464 print_time=2175.385 buffer_time=2.571 print_stall=0 extruder: target=200 temp=199.8 pwm=0.661
Stats 2171.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2661834 bytes_read=912969 bytes_retransmit=9 bytes_invalid=0 send_seq=60154 receive_seq=60154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=604950 sysload=0.37 cputime=143.875 memavail=716788 print_time=2175.895 buffer_time=2.079 print_stall=0 extruder: target=200 temp=199.9 pwm=0.661
Stats 2172.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2662908 bytes_read=913394 bytes_retransmit=9 bytes_invalid=0 send_seq=60179 receive_seq=60179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=605038 sysload=0.34 cputime=143.937 memavail=716748 print_time=2177.281 buffer_time=2.463 print_stall=0 extruder: target=200 temp=199.9 pwm=0.661
Stats 2173.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2663824 bytes_read=913822 bytes_retransmit=9 bytes_invalid=0 send_seq=60202 receive_seq=60202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.328 raspberry_pi: temp=43.4 mcu_temp: temp=38.8 sd_pos=605139 sysload=0.34 cputime=143.999 memavail=716556 print_time=2178.281 buffer_time=2.462 print_stall=0 extruder: target=200 temp=199.9 pwm=0.661
Stats 2174.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2664618 bytes_read=914230 bytes_retransmit=9 bytes_invalid=0 send_seq=60224 receive_seq=60224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.3 mcu_temp: temp=38.9 sd_pos=605214 sysload=0.34 cputime=144.059 memavail=716556 print_time=2179.227 buffer_time=2.407 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 2175.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2665141 bytes_read=914599 bytes_retransmit=9 bytes_invalid=0 send_seq=60241 receive_seq=60241 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=605282 sysload=0.34 cputime=144.118 memavail=716556 print_time=2180.091 buffer_time=2.270 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 2176.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2665492 bytes_read=914977 bytes_retransmit=9 bytes_invalid=0 send_seq=60254 receive_seq=60254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=605313 sysload=0.34 cputime=144.180 memavail=716564 print_time=2180.911 buffer_time=2.088 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 2177.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2666696 bytes_read=915425 bytes_retransmit=9 bytes_invalid=0 send_seq=60281 receive_seq=60281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=605440 sysload=0.31 cputime=144.244 memavail=716564 print_time=2182.987 buffer_time=3.162 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 2178.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2666880 bytes_read=915769 bytes_retransmit=9 bytes_invalid=0 send_seq=60293 receive_seq=60293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=44.2 mcu_temp: temp=38.6 sd_pos=605440 sysload=0.31 cputime=144.301 memavail=716564 print_time=2182.987 buffer_time=2.160 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 2179.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2669093 bytes_read=916302 bytes_retransmit=9 bytes_invalid=0 send_seq=60337 receive_seq=60337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=605845 sysload=0.31 cputime=144.368 memavail=716316 print_time=2184.334 buffer_time=2.506 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2180.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2671068 bytes_read=916800 bytes_retransmit=9 bytes_invalid=0 send_seq=60377 receive_seq=60377 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=606251 sysload=0.31 cputime=144.435 memavail=716444 print_time=2185.412 buffer_time=2.583 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2181.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2672849 bytes_read=917269 bytes_retransmit=9 bytes_invalid=0 send_seq=60414 receive_seq=60414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996607 heater_bed: target=60 temp=60.0 pwm=0.459 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=606813 sysload=0.31 cputime=144.503 memavail=715952 print_time=2186.154 buffer_time=2.323 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2182.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2674600 bytes_read=917782 bytes_retransmit=9 bytes_invalid=0 send_seq=60451 receive_seq=60451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=607414 sysload=0.28 cputime=144.573 memavail=715960 print_time=2187.124 buffer_time=2.289 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 2183.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2676335 bytes_read=918250 bytes_retransmit=9 bytes_invalid=0 send_seq=60486 receive_seq=60485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=607774 sysload=0.28 cputime=144.639 memavail=715708 print_time=2188.048 buffer_time=2.211 print_stall=0 extruder: target=200 temp=199.8 pwm=0.665
Stats 2184.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2677457 bytes_read=918669 bytes_retransmit=9 bytes_invalid=0 send_seq=60512 receive_seq=60512 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=607873 sysload=0.28 cputime=144.702 memavail=715708 print_time=2189.147 buffer_time=2.309 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 2185.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2678272 bytes_read=919082 bytes_retransmit=9 bytes_invalid=0 send_seq=60532 receive_seq=60532 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=607930 sysload=0.28 cputime=144.763 memavail=715456 print_time=2190.014 buffer_time=2.175 print_stall=0 extruder: target=200 temp=199.9 pwm=0.665
Stats 2186.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2679228 bytes_read=919495 bytes_retransmit=9 bytes_invalid=0 send_seq=60555 receive_seq=60555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=608029 sysload=0.28 cputime=144.825 memavail=715212 print_time=2190.960 buffer_time=2.120 print_stall=0 extruder: target=200 temp=199.9 pwm=0.652
Stats 2187.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2680023 bytes_read=919894 bytes_retransmit=9 bytes_invalid=0 send_seq=60575 receive_seq=60575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=608086 sysload=0.26 cputime=144.885 memavail=714976 print_time=2191.852 buffer_time=2.011 print_stall=0 extruder: target=200 temp=199.9 pwm=0.652
Stats 2188.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2681594 bytes_read=920377 bytes_retransmit=9 bytes_invalid=0 send_seq=60609 receive_seq=60609 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=608258 sysload=0.26 cputime=144.951 memavail=714724 print_time=2193.737 buffer_time=2.894 print_stall=0 extruder: target=200 temp=199.9 pwm=0.652
Stats 2189.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2682120 bytes_read=920760 bytes_retransmit=9 bytes_invalid=0 send_seq=60626 receive_seq=60626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=608326 sysload=0.26 cputime=145.010 memavail=714724 print_time=2194.601 buffer_time=2.757 print_stall=0 extruder: target=200 temp=200.0 pwm=0.652
Stats 2190.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2682468 bytes_read=921104 bytes_retransmit=9 bytes_invalid=0 send_seq=60638 receive_seq=60638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=608357 sysload=0.26 cputime=145.067 memavail=714472 print_time=2195.421 buffer_time=2.576 print_stall=0 extruder: target=200 temp=200.0 pwm=0.652
Stats 2191.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2683691 bytes_read=921557 bytes_retransmit=9 bytes_invalid=0 send_seq=60666 receive_seq=60666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=608484 sysload=0.26 cputime=145.131 memavail=714220 print_time=2197.496 buffer_time=3.650 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 2192.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2683864 bytes_read=921930 bytes_retransmit=9 bytes_invalid=0 send_seq=60678 receive_seq=60678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=608484 sysload=0.24 cputime=145.187 memavail=714228 print_time=2197.496 buffer_time=2.648 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 2193.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2685109 bytes_read=922349 bytes_retransmit=9 bytes_invalid=0 send_seq=60705 receive_seq=60705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=608678 sysload=0.24 cputime=145.248 memavail=714228 print_time=2198.153 buffer_time=2.303 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 2194.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2687061 bytes_read=922876 bytes_retransmit=9 bytes_invalid=0 send_seq=60745 receive_seq=60745 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=609029 sysload=0.24 cputime=145.314 memavail=714512 print_time=2199.360 buffer_time=2.508 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 2195.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2688342 bytes_read=923300 bytes_retransmit=9 bytes_invalid=0 send_seq=60773 receive_seq=60773 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=44.8 mcu_temp: temp=38.7 sd_pos=609195 sysload=0.24 cputime=145.374 memavail=714512 print_time=2200.029 buffer_time=2.177 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 2196.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2690811 bytes_read=923820 bytes_retransmit=9 bytes_invalid=0 send_seq=60822 receive_seq=60822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=609611 sysload=0.24 cputime=145.443 memavail=714244 print_time=2201.329 buffer_time=2.474 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 2197.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2692919 bytes_read=924368 bytes_retransmit=9 bytes_invalid=0 send_seq=60865 receive_seq=60865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.9 mcu_temp: temp=38.9 sd_pos=610050 sysload=0.22 cputime=145.512 memavail=714812 print_time=2202.426 buffer_time=2.569 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 2198.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2694170 bytes_read=924792 bytes_retransmit=9 bytes_invalid=0 send_seq=60893 receive_seq=60893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.454 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=610249 sysload=0.22 cputime=145.576 memavail=714812 print_time=2203.070 buffer_time=2.213 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 2199.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2696080 bytes_read=925286 bytes_retransmit=9 bytes_invalid=0 send_seq=60932 receive_seq=60932 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=610591 sysload=0.22 cputime=145.642 memavail=714812 print_time=2204.179 buffer_time=2.320 print_stall=0 extruder: target=200 temp=199.9 pwm=0.688
Stats 2200.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2697660 bytes_read=925763 bytes_retransmit=9 bytes_invalid=0 send_seq=60965 receive_seq=60965 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=610810 sysload=0.22 cputime=145.706 memavail=714560 print_time=2205.304 buffer_time=2.443 print_stall=0 extruder: target=200 temp=200.0 pwm=0.688
Stats 2201.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2698344 bytes_read=926142 bytes_retransmit=9 bytes_invalid=0 send_seq=60984 receive_seq=60984 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=610940 sysload=0.22 cputime=145.768 memavail=714572 print_time=2206.245 buffer_time=2.383 print_stall=0 extruder: target=200 temp=200.1 pwm=0.622
Stats 2202.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2699228 bytes_read=926561 bytes_retransmit=9 bytes_invalid=0 send_seq=61005 receive_seq=61005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.9 mcu_temp: temp=38.9 sd_pos=611110 sysload=0.20 cputime=145.834 memavail=714572 print_time=2207.066 buffer_time=2.203 print_stall=0 extruder: target=200 temp=200.2 pwm=0.622
Stats 2203.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2701034 bytes_read=927058 bytes_retransmit=9 bytes_invalid=0 send_seq=61042 receive_seq=61042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.4 mcu_temp: temp=38.7 sd_pos=611438 sysload=0.20 cputime=145.898 memavail=714588 print_time=2208.071 buffer_time=2.206 print_stall=0 extruder: target=200 temp=200.2 pwm=0.622
Stats 2204.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2702622 bytes_read=927512 bytes_retransmit=9 bytes_invalid=0 send_seq=61076 receive_seq=61076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.471 raspberry_pi: temp=44.4 mcu_temp: temp=38.7 sd_pos=611705 sysload=0.20 cputime=145.961 memavail=714536 print_time=2208.939 buffer_time=2.073 print_stall=0 extruder: target=200 temp=200.1 pwm=0.622
Stats 2205.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2704221 bytes_read=927986 bytes_retransmit=9 bytes_invalid=0 send_seq=61111 receive_seq=61111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=44.7 mcu_temp: temp=38.8 sd_pos=611972 sysload=0.20 cputime=146.025 memavail=714616 print_time=2209.970 buffer_time=2.102 print_stall=0 extruder: target=200 temp=200.2 pwm=0.603
Stats 2206.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2705789 bytes_read=928473 bytes_retransmit=9 bytes_invalid=0 send_seq=61146 receive_seq=61146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.455 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=612238 sysload=0.20 cputime=146.091 memavail=714812 print_time=2211.002 buffer_time=2.132 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 2207.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000054 bytes_write=2707413 bytes_read=928937 bytes_retransmit=9 bytes_invalid=0 send_seq=61179 receive_seq=61179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.7 mcu_temp: temp=38.9 sd_pos=612504 sysload=0.19 cputime=146.157 memavail=715436 print_time=2212.092 buffer_time=2.221 print_stall=0 extruder: target=200 temp=200.1 pwm=0.666
Stats 2208.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000054 bytes_write=2708311 bytes_read=929341 bytes_retransmit=9 bytes_invalid=0 send_seq=61200 receive_seq=61200 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=612638 sysload=0.19 cputime=146.217 memavail=715396 print_time=2212.869 buffer_time=1.997 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 2209.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000054 bytes_write=2709599 bytes_read=929793 bytes_retransmit=9 bytes_invalid=0 send_seq=61228 receive_seq=61228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=612838 sysload=0.19 cputime=146.281 memavail=715456 print_time=2214.242 buffer_time=2.368 print_stall=0 extruder: target=200 temp=200.0 pwm=0.666
Stats 2210.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000054 bytes_write=2710575 bytes_read=930197 bytes_retransmit=9 bytes_invalid=0 send_seq=61252 receive_seq=61252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=43.8 mcu_temp: temp=38.7 sd_pos=612970 sysload=0.19 cputime=146.343 memavail=715440 print_time=2215.291 buffer_time=2.416 print_stall=0 extruder: target=200 temp=200.0 pwm=0.643
Stats 2211.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000054 bytes_write=2711496 bytes_read=930611 bytes_retransmit=9 bytes_invalid=0 send_seq=61275 receive_seq=61275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=43.8 mcu_temp: temp=38.9 sd_pos=613104 sysload=0.19 cputime=146.406 memavail=715756 print_time=2216.343 buffer_time=2.466 print_stall=0 extruder: target=200 temp=200.1 pwm=0.643
Stats 2212.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2712076 bytes_read=931023 bytes_retransmit=9 bytes_invalid=0 send_seq=61292 receive_seq=61292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.328 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=613170 sysload=0.41 cputime=146.470 memavail=716544 print_time=2216.878 buffer_time=2.001 print_stall=0 extruder: target=200 temp=200.2 pwm=0.643
Stats 2213.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2713357 bytes_read=931452 bytes_retransmit=9 bytes_invalid=0 send_seq=61321 receive_seq=61321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=613371 sysload=0.41 cputime=146.534 memavail=716744 print_time=2218.265 buffer_time=2.387 print_stall=0 extruder: target=200 temp=200.2 pwm=0.643
Stats 2214.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2714760 bytes_read=931917 bytes_retransmit=9 bytes_invalid=0 send_seq=61352 receive_seq=61352 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.330 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=613572 sysload=0.41 cputime=146.597 memavail=716872 print_time=2219.305 buffer_time=2.426 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 2215.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2716297 bytes_read=932394 bytes_retransmit=9 bytes_invalid=0 send_seq=61385 receive_seq=61385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=613838 sysload=0.41 cputime=146.660 memavail=717072 print_time=2220.331 buffer_time=2.451 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 2216.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2717793 bytes_read=932843 bytes_retransmit=9 bytes_invalid=0 send_seq=61418 receive_seq=61418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.327 raspberry_pi: temp=43.8 mcu_temp: temp=38.9 sd_pos=614105 sysload=0.41 cputime=146.722 memavail=717252 print_time=2221.363 buffer_time=2.481 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 2217.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2718706 bytes_read=933277 bytes_retransmit=9 bytes_invalid=0 send_seq=61442 receive_seq=61442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=43.8 mcu_temp: temp=38.7 sd_pos=614236 sysload=0.46 cputime=146.784 memavail=717544 print_time=2221.878 buffer_time=1.996 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 2218.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2721679 bytes_read=933864 bytes_retransmit=9 bytes_invalid=0 send_seq=61497 receive_seq=61497 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=614769 sysload=0.46 cputime=146.853 memavail=718044 print_time=2223.483 buffer_time=2.600 print_stall=0 extruder: target=200 temp=200.1 pwm=0.637
Stats 2219.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2723252 bytes_read=934313 bytes_retransmit=9 bytes_invalid=0 send_seq=61531 receive_seq=61530 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.303 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=615112 sysload=0.46 cputime=146.918 memavail=717796 print_time=2224.331 buffer_time=2.446 print_stall=0 extruder: target=200 temp=200.0 pwm=0.637
Stats 2220.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2724051 bytes_read=934717 bytes_retransmit=9 bytes_invalid=0 send_seq=61551 receive_seq=61551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.6 mcu_temp: temp=38.8 sd_pos=615180 sysload=0.46 cputime=146.979 memavail=717996 print_time=2224.991 buffer_time=2.105 print_stall=0 extruder: target=200 temp=200.0 pwm=0.637
Stats 2221.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2725145 bytes_read=935149 bytes_retransmit=9 bytes_invalid=0 send_seq=61576 receive_seq=61576 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=615268 sysload=0.46 cputime=147.044 memavail=718048 print_time=2226.298 buffer_time=2.411 print_stall=0 extruder: target=200 temp=200.0 pwm=0.637
Stats 2222.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2726070 bytes_read=935553 bytes_retransmit=9 bytes_invalid=0 send_seq=61599 receive_seq=61599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=615367 sysload=0.50 cputime=147.106 memavail=717204 print_time=2227.244 buffer_time=2.356 print_stall=0 extruder: target=200 temp=199.9 pwm=0.707
Stats 2223.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2726882 bytes_read=935954 bytes_retransmit=9 bytes_invalid=0 send_seq=61620 receive_seq=61620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=615424 sysload=0.50 cputime=147.166 memavail=717332 print_time=2228.135 buffer_time=2.245 print_stall=0 extruder: target=200 temp=199.8 pwm=0.707
Stats 2224.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2727832 bytes_read=936376 bytes_retransmit=9 bytes_invalid=0 send_seq=61642 receive_seq=61642 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=615523 sysload=0.50 cputime=147.229 memavail=717292 print_time=2229.105 buffer_time=2.213 print_stall=0 extruder: target=200 temp=199.7 pwm=0.707
Stats 2225.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2728616 bytes_read=936760 bytes_retransmit=9 bytes_invalid=0 send_seq=61662 receive_seq=61662 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.306 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=615598 sysload=0.50 cputime=147.290 memavail=718104 print_time=2230.021 buffer_time=2.128 print_stall=0 extruder: target=200 temp=199.7 pwm=0.707
Stats 2226.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2729266 bytes_read=937154 bytes_retransmit=9 bytes_invalid=0 send_seq=61681 receive_seq=61681 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=43.4 mcu_temp: temp=38.8 sd_pos=615697 sysload=0.50 cputime=147.353 memavail=717852 print_time=2231.704 buffer_time=2.809 print_stall=0 extruder: target=200 temp=199.7 pwm=0.700
Stats 2227.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2730548 bytes_read=937626 bytes_retransmit=9 bytes_invalid=0 send_seq=61710 receive_seq=61710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=615824 sysload=0.54 cputime=147.420 memavail=717688 print_time=2233.780 buffer_time=3.883 print_stall=0 extruder: target=200 temp=199.6 pwm=0.700
Stats 2228.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2730705 bytes_read=937965 bytes_retransmit=9 bytes_invalid=0 send_seq=61721 receive_seq=61721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.348 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=615824 sysload=0.54 cputime=147.476 memavail=717492 print_time=2233.780 buffer_time=2.882 print_stall=0 extruder: target=200 temp=199.7 pwm=0.700
Stats 2229.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2731969 bytes_read=938414 bytes_retransmit=9 bytes_invalid=0 send_seq=61751 receive_seq=61751 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996557 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=616016 sysload=0.54 cputime=147.540 memavail=717492 print_time=2234.440 buffer_time=2.539 print_stall=0 extruder: target=200 temp=199.7 pwm=0.700
Stats 2230.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2732941 bytes_read=938846 bytes_retransmit=9 bytes_invalid=0 send_seq=61775 receive_seq=61775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996555 heater_bed: target=60 temp=60.0 pwm=0.435 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=616187 sysload=0.54 cputime=147.607 memavail=717748 print_time=2235.079 buffer_time=2.177 print_stall=0 extruder: target=200 temp=199.8 pwm=0.673
Stats 2231.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2735293 bytes_read=939380 bytes_retransmit=9 bytes_invalid=0 send_seq=61822 receive_seq=61822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996555 heater_bed: target=60 temp=60.0 pwm=0.302 raspberry_pi: temp=43.8 mcu_temp: temp=38.8 sd_pos=616525 sysload=0.54 cputime=147.676 memavail=717748 print_time=2236.313 buffer_time=2.410 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 2232.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2736599 bytes_read=939824 bytes_retransmit=9 bytes_invalid=0 send_seq=61851 receive_seq=61851 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=616797 sysload=0.74 cputime=147.743 memavail=717452 print_time=2236.996 buffer_time=2.092 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 2233.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2738720 bytes_read=940351 bytes_retransmit=9 bytes_invalid=0 send_seq=61894 receive_seq=61894 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.458 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=617235 sysload=0.74 cputime=147.811 memavail=717508 print_time=2238.049 buffer_time=2.145 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Stats 2234.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2741078 bytes_read=940870 bytes_retransmit=9 bytes_invalid=0 send_seq=61941 receive_seq=61941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=617579 sysload=0.74 cputime=147.884 memavail=717508 print_time=2239.338 buffer_time=2.432 print_stall=0 extruder: target=200 temp=200.0 pwm=0.647
Stats 2235.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2742319 bytes_read=941328 bytes_retransmit=9 bytes_invalid=0 send_seq=61970 receive_seq=61970 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=617820 sysload=0.74 cputime=147.950 memavail=717508 print_time=2240.089 buffer_time=2.181 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2236.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2743977 bytes_read=941821 bytes_retransmit=9 bytes_invalid=0 send_seq=62006 receive_seq=62006 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=618002 sysload=0.74 cputime=148.017 memavail=717256 print_time=2240.962 buffer_time=2.053 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2237.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2745042 bytes_read=942230 bytes_retransmit=9 bytes_invalid=0 send_seq=62031 receive_seq=62031 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.321 raspberry_pi: temp=43.6 mcu_temp: temp=38.7 sd_pos=618204 sysload=0.68 cputime=148.083 memavail=718068 print_time=2241.992 buffer_time=2.080 print_stall=0 extruder: target=200 temp=200.1 pwm=0.647
Stats 2238.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2746029 bytes_read=942643 bytes_retransmit=9 bytes_invalid=0 send_seq=62055 receive_seq=62051 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=618433 sysload=0.68 cputime=148.150 memavail=718320 print_time=2243.331 buffer_time=2.414 print_stall=0 extruder: target=200 temp=200.2 pwm=0.647
Stats 2239.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2746848 bytes_read=943066 bytes_retransmit=9 bytes_invalid=0 send_seq=62076 receive_seq=62076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=618536 sysload=0.68 cputime=148.213 memavail=718824 print_time=2244.131 buffer_time=2.213 print_stall=0 extruder: target=200 temp=200.2 pwm=0.612
Stats 2240.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2748458 bytes_read=943530 bytes_retransmit=9 bytes_invalid=0 send_seq=62112 receive_seq=62112 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996556 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=618771 sysload=0.68 cputime=148.276 memavail=718772 print_time=2244.938 buffer_time=2.020 print_stall=0 extruder: target=200 temp=200.1 pwm=0.693
Stats 2241.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2751440 bytes_read=944148 bytes_retransmit=9 bytes_invalid=0 send_seq=62170 receive_seq=62170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996551 heater_bed: target=60 temp=60.0 pwm=0.348 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=619237 sysload=0.68 cputime=148.346 memavail=719076 print_time=2246.325 buffer_time=2.406 print_stall=0 extruder: target=200 temp=200.1 pwm=0.693
Stats 2242.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2753171 bytes_read=944631 bytes_retransmit=9 bytes_invalid=0 send_seq=62207 receive_seq=62207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996549 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=619504 sysload=0.63 cputime=148.411 memavail=718604 print_time=2247.467 buffer_time=2.548 print_stall=0 extruder: target=200 temp=200.1 pwm=0.693
Stats 2243.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2754119 bytes_read=945025 bytes_retransmit=9 bytes_invalid=0 send_seq=62229 receive_seq=62229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996551 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=619635 sysload=0.63 cputime=148.477 memavail=719108 print_time=2248.134 buffer_time=2.214 print_stall=0 extruder: target=200 temp=200.1 pwm=0.693
Stats 2244.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2755436 bytes_read=945488 bytes_retransmit=9 bytes_invalid=0 send_seq=62259 receive_seq=62259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996549 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=619836 sysload=0.63 cputime=148.542 memavail=718608 print_time=2249.260 buffer_time=2.339 print_stall=0 extruder: target=200 temp=200.1 pwm=0.650
Stats 2245.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2756436 bytes_read=945901 bytes_retransmit=9 bytes_invalid=0 send_seq=62282 receive_seq=62282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996553 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=619969 sysload=0.63 cputime=148.605 memavail=718380 print_time=2249.928 buffer_time=2.007 print_stall=0 extruder: target=200 temp=200.2 pwm=0.650
Stats 2246.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2759420 bytes_read=946470 bytes_retransmit=9 bytes_invalid=0 send_seq=62339 receive_seq=62339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=167996559 heater_bed: target=60 temp=60.0 pwm=0.541 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=620541 sysload=0.63 cputime=148.675 memavail=718580 print_time=2251.471 buffer_time=2.548 print_stall=0 extruder: target=200 temp=200.3 pwm=0.592
Stats 2247.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2760709 bytes_read=946944 bytes_retransmit=9 bytes_invalid=0 send_seq=62370 receive_seq=62370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.0 mcu_temp: temp=38.7 sd_pos=620647 sysload=0.58 cputime=148.743 memavail=719164 print_time=2252.043 buffer_time=2.114 print_stall=0 extruder: target=200 temp=200.3 pwm=0.592
Stats 2248.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2762693 bytes_read=947429 bytes_retransmit=9 bytes_invalid=0 send_seq=62409 receive_seq=62409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996566 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=620915 sysload=0.58 cputime=148.807 memavail=719176 print_time=2253.067 buffer_time=2.138 print_stall=0 extruder: target=200 temp=200.3 pwm=0.592
Stats 2249.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2765503 bytes_read=947983 bytes_retransmit=9 bytes_invalid=0 send_seq=62463 receive_seq=62463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.439 raspberry_pi: temp=43.7 mcu_temp: temp=38.7 sd_pos=621315 sysload=0.58 cputime=148.875 memavail=719376 print_time=2254.319 buffer_time=2.389 print_stall=0 extruder: target=200 temp=200.3 pwm=0.652
Stats 2250.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2766955 bytes_read=948456 bytes_retransmit=9 bytes_invalid=0 send_seq=62495 receive_seq=62495 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=621581 sysload=0.58 cputime=148.939 memavail=719428 print_time=2255.250 buffer_time=2.319 print_stall=0 extruder: target=200 temp=200.2 pwm=0.652
Stats 2251.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2768869 bytes_read=948944 bytes_retransmit=9 bytes_invalid=0 send_seq=62533 receive_seq=62533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=621910 sysload=0.58 cputime=149.001 memavail=719632 print_time=2256.237 buffer_time=2.306 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 2252.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2770777 bytes_read=949433 bytes_retransmit=9 bytes_invalid=0 send_seq=62571 receive_seq=62571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=622183 sysload=0.53 cputime=149.071 memavail=719432 print_time=2257.049 buffer_time=2.117 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 2253.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2772003 bytes_read=949886 bytes_retransmit=9 bytes_invalid=0 send_seq=62599 receive_seq=62599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.423 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=622316 sysload=0.53 cputime=149.144 memavail=718936 print_time=2258.028 buffer_time=2.095 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 2254.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2773274 bytes_read=950324 bytes_retransmit=9 bytes_invalid=0 send_seq=62627 receive_seq=62627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=622514 sysload=0.53 cputime=149.212 memavail=718432 print_time=2259.091 buffer_time=2.157 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 2255.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2775068 bytes_read=950788 bytes_retransmit=9 bytes_invalid=0 send_seq=62663 receive_seq=62663 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.1 pwm=0.265 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=622779 sysload=0.53 cputime=149.279 memavail=718432 print_time=2260.288 buffer_time=2.353 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 2256.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2776782 bytes_read=951281 bytes_retransmit=9 bytes_invalid=0 send_seq=62699 receive_seq=62699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.334 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=623046 sysload=0.53 cputime=149.349 memavail=718636 print_time=2261.230 buffer_time=2.292 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 2257.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2779313 bytes_read=951834 bytes_retransmit=9 bytes_invalid=0 send_seq=62747 receive_seq=62747 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=623506 sysload=0.49 cputime=149.418 memavail=718692 print_time=2262.202 buffer_time=2.263 print_stall=0 extruder: target=200 temp=199.9 pwm=0.679
Stats 2258.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2781444 bytes_read=952323 bytes_retransmit=9 bytes_invalid=0 send_seq=62788 receive_seq=62788 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=623724 sysload=0.49 cputime=149.486 memavail=718692 print_time=2263.429 buffer_time=2.489 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 2259.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2783559 bytes_read=952851 bytes_retransmit=9 bytes_invalid=0 send_seq=62831 receive_seq=62831 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.302 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=624114 sysload=0.49 cputime=149.560 memavail=718892 print_time=2264.347 buffer_time=2.402 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 2260.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2784791 bytes_read=953284 bytes_retransmit=9 bytes_invalid=0 send_seq=62858 receive_seq=62858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=624202 sysload=0.49 cputime=149.628 memavail=718952 print_time=2265.291 buffer_time=2.345 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 2261.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2785932 bytes_read=953703 bytes_retransmit=9 bytes_invalid=0 send_seq=62885 receive_seq=62885 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=45.1 mcu_temp: temp=38.8 sd_pos=624290 sysload=0.49 cputime=149.700 memavail=718212 print_time=2266.597 buffer_time=2.650 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 2262.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2786588 bytes_read=954141 bytes_retransmit=9 bytes_invalid=0 send_seq=62904 receive_seq=62904 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=44.6 mcu_temp: temp=38.6 sd_pos=624358 sysload=0.45 cputime=149.764 memavail=718736 print_time=2267.092 buffer_time=2.144 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 2263.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2787720 bytes_read=954560 bytes_retransmit=9 bytes_invalid=0 send_seq=62931 receive_seq=62931 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.361 raspberry_pi: temp=45.0 mcu_temp: temp=38.8 sd_pos=624446 sysload=0.45 cputime=149.831 memavail=717992 print_time=2268.435 buffer_time=2.486 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 2264.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2788673 bytes_read=954934 bytes_retransmit=9 bytes_invalid=0 send_seq=62954 receive_seq=62949 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.334 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=624545 sysload=0.45 cputime=149.898 memavail=717992 print_time=2269.404 buffer_time=2.455 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 2265.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2789486 bytes_read=955391 bytes_retransmit=9 bytes_invalid=0 send_seq=62975 receive_seq=62975 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=624620 sysload=0.45 cputime=149.965 memavail=717992 print_time=2270.320 buffer_time=2.369 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 2266.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000050 bytes_write=2790014 bytes_read=955765 bytes_retransmit=9 bytes_invalid=0 send_seq=62993 receive_seq=62993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=45.3 mcu_temp: temp=39.0 sd_pos=624687 sysload=0.45 cputime=150.034 memavail=717992 print_time=2271.183 buffer_time=2.231 print_stall=0 extruder: target=200 temp=200.0 pwm=0.643
Stats 2267.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2790370 bytes_read=956134 bytes_retransmit=9 bytes_invalid=0 send_seq=63007 receive_seq=63007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.8 mcu_temp: temp=38.9 sd_pos=624718 sysload=0.41 cputime=150.101 memavail=718288 print_time=2272.003 buffer_time=2.051 print_stall=0 extruder: target=200 temp=200.0 pwm=0.643
Stats 2268.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2791564 bytes_read=956596 bytes_retransmit=9 bytes_invalid=0 send_seq=63034 receive_seq=63034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=45.2 mcu_temp: temp=38.8 sd_pos=624841 sysload=0.41 cputime=150.176 memavail=717036 print_time=2274.079 buffer_time=3.125 print_stall=0 extruder: target=200 temp=199.9 pwm=0.643
Stats 2269.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2791721 bytes_read=956935 bytes_retransmit=9 bytes_invalid=0 send_seq=63045 receive_seq=63045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=44.9 mcu_temp: temp=38.7 sd_pos=624841 sysload=0.41 cputime=150.238 memavail=716988 print_time=2274.079 buffer_time=2.123 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 2270.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2793728 bytes_read=957419 bytes_retransmit=9 bytes_invalid=0 send_seq=63085 receive_seq=63085 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=625202 sysload=0.41 cputime=150.311 memavail=717804 print_time=2275.369 buffer_time=2.413 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 2271.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2796047 bytes_read=957971 bytes_retransmit=9 bytes_invalid=0 send_seq=63130 receive_seq=63130 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=45.0 mcu_temp: temp=38.8 sd_pos=625535 sysload=0.41 cputime=150.387 memavail=717808 print_time=2276.614 buffer_time=2.656 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 2272.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2797289 bytes_read=958402 bytes_retransmit=9 bytes_invalid=0 send_seq=63157 receive_seq=63157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.7 mcu_temp: temp=38.9 sd_pos=625773 sysload=0.38 cputime=150.460 memavail=718188 print_time=2277.274 buffer_time=2.313 print_stall=0 extruder: target=200 temp=199.9 pwm=0.703
Stats 2273.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2799463 bytes_read=958925 bytes_retransmit=9 bytes_invalid=0 send_seq=63202 receive_seq=63202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996687 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.7 mcu_temp: temp=38.9 sd_pos=626238 sysload=0.38 cputime=150.542 memavail=717692 print_time=2278.341 buffer_time=2.380 print_stall=0 extruder: target=200 temp=199.8 pwm=0.696
Stats 2274.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2800715 bytes_read=959370 bytes_retransmit=9 bytes_invalid=0 send_seq=63229 receive_seq=63229 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996679 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=44.7 mcu_temp: temp=38.8 sd_pos=626379 sysload=0.38 cputime=150.614 memavail=717892 print_time=2278.992 buffer_time=2.030 print_stall=0 extruder: target=200 temp=199.8 pwm=0.696
Stats 2275.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2803084 bytes_read=959889 bytes_retransmit=9 bytes_invalid=0 send_seq=63276 receive_seq=63276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=626810 sysload=0.38 cputime=150.689 memavail=717944 print_time=2280.397 buffer_time=2.434 print_stall=0 extruder: target=200 temp=199.8 pwm=0.696
Stats 2276.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2804627 bytes_read=960343 bytes_retransmit=9 bytes_invalid=0 send_seq=63307 receive_seq=63307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996677 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.6 mcu_temp: temp=38.8 sd_pos=626956 sysload=0.38 cputime=150.762 memavail=718144 print_time=2281.250 buffer_time=2.285 print_stall=0 extruder: target=200 temp=199.9 pwm=0.696
Stats 2277.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2805674 bytes_read=960790 bytes_retransmit=9 bytes_invalid=0 send_seq=63331 receive_seq=63331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=627159 sysload=0.35 cputime=150.835 memavail=718228 print_time=2282.280 buffer_time=2.314 print_stall=0 extruder: target=200 temp=200.0 pwm=0.636
Stats 2278.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2806439 bytes_read=961174 bytes_retransmit=9 bytes_invalid=0 send_seq=63351 receive_seq=63351 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996668 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=627321 sysload=0.35 cputime=150.908 memavail=717932 print_time=2283.194 buffer_time=2.227 print_stall=0 extruder: target=200 temp=200.1 pwm=0.636
Stats 2279.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2808645 bytes_read=961693 bytes_retransmit=9 bytes_invalid=0 send_seq=63395 receive_seq=63395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996669 heater_bed: target=60 temp=60.0 pwm=0.425 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=627724 sysload=0.35 cputime=150.988 memavail=718240 print_time=2284.624 buffer_time=2.654 print_stall=0 extruder: target=200 temp=200.1 pwm=0.636
Stats 2280.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2809523 bytes_read=962120 bytes_retransmit=9 bytes_invalid=0 send_seq=63418 receive_seq=63418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996661 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=627857 sysload=0.35 cputime=151.058 memavail=718188 print_time=2285.009 buffer_time=2.039 print_stall=0 extruder: target=200 temp=200.2 pwm=0.636
Stats 2281.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2811087 bytes_read=962574 bytes_retransmit=9 bytes_invalid=0 send_seq=63452 receive_seq=63452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996665 heater_bed: target=60 temp=60.0 pwm=0.357 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=628124 sysload=0.35 cputime=151.134 memavail=718504 print_time=2286.007 buffer_time=2.034 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2282.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2812645 bytes_read=963053 bytes_retransmit=9 bytes_invalid=0 send_seq=63485 receive_seq=63485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996657 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=43.7 mcu_temp: temp=38.8 sd_pos=628392 sysload=0.32 cputime=151.206 memavail=718252 print_time=2287.038 buffer_time=2.065 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2283.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2814160 bytes_read=963520 bytes_retransmit=9 bytes_invalid=0 send_seq=63516 receive_seq=63516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996649 heater_bed: target=60 temp=60.0 pwm=0.361 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=628656 sysload=0.32 cputime=151.279 memavail=718000 print_time=2288.070 buffer_time=2.095 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2284.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2815446 bytes_read=963944 bytes_retransmit=9 bytes_invalid=0 send_seq=63544 receive_seq=63544 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996642 heater_bed: target=60 temp=60.0 pwm=0.361 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=628858 sysload=0.32 cputime=151.349 memavail=718260 print_time=2288.988 buffer_time=2.013 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2285.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2816809 bytes_read=964388 bytes_retransmit=9 bytes_invalid=0 send_seq=63573 receive_seq=63573 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.361 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=629061 sysload=0.32 cputime=151.420 memavail=718208 print_time=2290.331 buffer_time=2.352 print_stall=0 extruder: target=200 temp=200.1 pwm=0.640
Stats 2286.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000056 bytes_write=2817747 bytes_read=964815 bytes_retransmit=9 bytes_invalid=0 send_seq=63596 receive_seq=63596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=629197 sysload=0.32 cputime=151.490 memavail=718296 print_time=2291.341 buffer_time=2.361 print_stall=0 extruder: target=200 temp=200.1 pwm=0.642
Stats 2287.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2818642 bytes_read=965229 bytes_retransmit=9 bytes_invalid=0 send_seq=63619 receive_seq=63619 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996626 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=629331 sysload=0.29 cputime=151.559 memavail=718528 print_time=2292.392 buffer_time=2.408 print_stall=0 extruder: target=200 temp=200.1 pwm=0.642
Stats 2288.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2819588 bytes_read=965643 bytes_retransmit=9 bytes_invalid=0 send_seq=63642 receive_seq=63642 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=629466 sysload=0.29 cputime=151.631 memavail=718580 print_time=2293.431 buffer_time=2.444 print_stall=0 extruder: target=200 temp=200.2 pwm=0.642
Stats 2289.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2820458 bytes_read=966065 bytes_retransmit=9 bytes_invalid=0 send_seq=63664 receive_seq=63664 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=629600 sysload=0.29 cputime=151.700 memavail=718304 print_time=2294.379 buffer_time=2.389 print_stall=0 extruder: target=200 temp=200.2 pwm=0.642
Stats 2290.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2821494 bytes_read=966474 bytes_retransmit=9 bytes_invalid=0 send_seq=63689 receive_seq=63689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996606 heater_bed: target=60 temp=60.0 pwm=0.355 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=629736 sysload=0.29 cputime=151.770 memavail=718284 print_time=2295.211 buffer_time=2.218 print_stall=0 extruder: target=200 temp=200.1 pwm=0.646
Stats 2291.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2823132 bytes_read=966948 bytes_retransmit=9 bytes_invalid=0 send_seq=63724 receive_seq=63724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=630005 sysload=0.29 cputime=151.842 memavail=718820 print_time=2296.368 buffer_time=2.374 print_stall=0 extruder: target=200 temp=200.1 pwm=0.646
Stats 2292.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2824679 bytes_read=967440 bytes_retransmit=9 bytes_invalid=0 send_seq=63757 receive_seq=63757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=44.7 mcu_temp: temp=38.7 sd_pos=630277 sysload=0.27 cputime=151.913 memavail=718868 print_time=2297.400 buffer_time=2.403 print_stall=0 extruder: target=200 temp=200.1 pwm=0.646
Stats 2293.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2826218 bytes_read=967894 bytes_retransmit=9 bytes_invalid=0 send_seq=63791 receive_seq=63791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=630545 sysload=0.27 cputime=151.984 memavail=718872 print_time=2298.431 buffer_time=2.431 print_stall=0 extruder: target=200 temp=200.0 pwm=0.697
Stats 2294.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2827829 bytes_read=968358 bytes_retransmit=9 bytes_invalid=0 send_seq=63824 receive_seq=63824 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=43.6 mcu_temp: temp=38.8 sd_pos=630816 sysload=0.27 cputime=152.059 memavail=718376 print_time=2299.413 buffer_time=2.409 print_stall=0 extruder: target=200 temp=199.9 pwm=0.697
Stats 2295.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2829426 bytes_read=968845 bytes_retransmit=9 bytes_invalid=0 send_seq=63859 receive_seq=63859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=631086 sysload=0.27 cputime=152.130 memavail=718156 print_time=2300.036 buffer_time=2.029 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2296.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2831432 bytes_read=969340 bytes_retransmit=9 bytes_invalid=0 send_seq=63899 receive_seq=63898 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=631465 sysload=0.27 cputime=152.212 memavail=718104 print_time=2301.095 buffer_time=2.084 print_stall=0 extruder: target=200 temp=199.9 pwm=0.646
Stats 2297.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2832874 bytes_read=969803 bytes_retransmit=9 bytes_invalid=0 send_seq=63929 receive_seq=63928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.312 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=631587 sysload=0.25 cputime=152.284 memavail=718192 print_time=2302.850 buffer_time=2.837 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2298.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2833490 bytes_read=970176 bytes_retransmit=9 bytes_invalid=0 send_seq=63946 receive_seq=63945 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.3 mcu_temp: temp=38.9 sd_pos=631657 sysload=0.25 cputime=152.352 memavail=717940 print_time=2303.345 buffer_time=2.329 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2299.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2834614 bytes_read=970582 bytes_retransmit=9 bytes_invalid=0 send_seq=63972 receive_seq=63971 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=631747 sysload=0.25 cputime=152.423 memavail=717964 print_time=2304.688 buffer_time=2.670 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2300.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2835248 bytes_read=970990 bytes_retransmit=9 bytes_invalid=0 send_seq=63991 receive_seq=63990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=631817 sysload=0.25 cputime=152.491 memavail=717964 print_time=2305.194 buffer_time=2.174 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 2301.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=2836382 bytes_read=971423 bytes_retransmit=9 bytes_invalid=0 send_seq=64018 receive_seq=64017 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=631925 sysload=0.25 cputime=152.562 memavail=717468 print_time=2306.573 buffer_time=2.550 print_stall=0 extruder: target=200 temp=199.9 pwm=0.667
Stats 2302.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2836896 bytes_read=971807 bytes_retransmit=9 bytes_invalid=0 send_seq=64034 receive_seq=64034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=631995 sysload=0.23 cputime=152.630 memavail=717216 print_time=2307.436 buffer_time=2.408 print_stall=0 extruder: target=200 temp=199.9 pwm=0.667
Stats 2303.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2837220 bytes_read=972180 bytes_retransmit=9 bytes_invalid=0 send_seq=64046 receive_seq=64046 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=632027 sysload=0.23 cputime=152.698 memavail=717416 print_time=2308.256 buffer_time=2.226 print_stall=0 extruder: target=200 temp=199.8 pwm=0.667
Stats 2304.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2838440 bytes_read=972623 bytes_retransmit=9 bytes_invalid=0 send_seq=64075 receive_seq=64075 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=632154 sysload=0.23 cputime=152.771 memavail=716732 print_time=2310.332 buffer_time=3.299 print_stall=0 extruder: target=200 temp=199.7 pwm=0.704
Stats 2305.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2838613 bytes_read=972967 bytes_retransmit=9 bytes_invalid=0 send_seq=64087 receive_seq=64087 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.3 mcu_temp: temp=38.9 sd_pos=632154 sysload=0.23 cputime=152.836 memavail=716692 print_time=2310.332 buffer_time=2.296 print_stall=0 extruder: target=200 temp=199.7 pwm=0.704
Stats 2306.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2840884 bytes_read=973500 bytes_retransmit=9 bytes_invalid=0 send_seq=64132 receive_seq=64131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=632631 sysload=0.23 cputime=152.914 memavail=716996 print_time=2311.710 buffer_time=2.671 print_stall=0 extruder: target=200 temp=199.6 pwm=0.704
Stats 2307.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2841954 bytes_read=973943 bytes_retransmit=9 bytes_invalid=0 send_seq=64157 receive_seq=64157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=43.9 mcu_temp: temp=39.2 sd_pos=632801 sysload=0.21 cputime=152.985 memavail=716568 print_time=2312.197 buffer_time=2.154 print_stall=0 extruder: target=200 temp=199.6 pwm=0.704
Stats 2308.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2844117 bytes_read=974432 bytes_retransmit=9 bytes_invalid=0 send_seq=64199 receive_seq=64198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.322 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=633164 sysload=0.21 cputime=153.060 memavail=716264 print_time=2313.413 buffer_time=2.368 print_stall=0 extruder: target=200 temp=199.6 pwm=0.729
Stats 2309.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2846344 bytes_read=974984 bytes_retransmit=9 bytes_invalid=0 send_seq=64243 receive_seq=64243 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=633677 sysload=0.21 cputime=153.139 memavail=716024 print_time=2314.571 buffer_time=2.523 print_stall=0 extruder: target=200 temp=199.6 pwm=0.729
Stats 2310.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2847564 bytes_read=975408 bytes_retransmit=9 bytes_invalid=0 send_seq=64271 receive_seq=64271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=633881 sysload=0.21 cputime=153.213 memavail=716340 print_time=2315.204 buffer_time=2.153 print_stall=0 extruder: target=200 temp=199.6 pwm=0.729
Stats 2311.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=2849480 bytes_read=975907 bytes_retransmit=9 bytes_invalid=0 send_seq=64311 receive_seq=64311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.308 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=634195 sysload=0.21 cputime=153.287 memavail=716536 print_time=2316.300 buffer_time=2.246 print_stall=0 extruder: target=200 temp=199.6 pwm=0.729
Stats 2312.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2851072 bytes_read=976404 bytes_retransmit=9 bytes_invalid=0 send_seq=64345 receive_seq=64345 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996566 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=43.6 mcu_temp: temp=38.8 sd_pos=634417 sysload=0.19 cputime=153.363 memavail=716588 print_time=2317.429 buffer_time=2.373 print_stall=0 extruder: target=200 temp=199.7 pwm=0.669
Stats 2313.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2851805 bytes_read=976783 bytes_retransmit=9 bytes_invalid=0 send_seq=64365 receive_seq=64364 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.333 raspberry_pi: temp=44.3 mcu_temp: temp=39.1 sd_pos=634551 sysload=0.19 cputime=153.434 memavail=716588 print_time=2318.371 buffer_time=2.311 print_stall=0 extruder: target=200 temp=199.8 pwm=0.669
Stats 2314.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2852623 bytes_read=977192 bytes_retransmit=9 bytes_invalid=0 send_seq=64386 receive_seq=64386 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=634720 sysload=0.19 cputime=153.506 memavail=716284 print_time=2319.192 buffer_time=2.128 print_stall=0 extruder: target=200 temp=199.9 pwm=0.669
Stats 2315.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2854817 bytes_read=977724 bytes_retransmit=9 bytes_invalid=0 send_seq=64430 receive_seq=64430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=635062 sysload=0.19 cputime=153.582 memavail=716600 print_time=2320.799 buffer_time=2.734 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 2316.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2856184 bytes_read=978158 bytes_retransmit=9 bytes_invalid=0 send_seq=64461 receive_seq=64460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=635266 sysload=0.19 cputime=153.652 memavail=716852 print_time=2321.298 buffer_time=2.229 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 2317.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2857946 bytes_read=978652 bytes_retransmit=9 bytes_invalid=0 send_seq=64497 receive_seq=64496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=635535 sysload=0.18 cputime=153.724 memavail=717056 print_time=2322.186 buffer_time=2.114 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 2318.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2859847 bytes_read=979159 bytes_retransmit=9 bytes_invalid=0 send_seq=64535 receive_seq=64535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=635814 sysload=0.18 cputime=153.800 memavail=716900 print_time=2323.329 buffer_time=2.253 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 2319.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2861153 bytes_read=979578 bytes_retransmit=9 bytes_invalid=0 send_seq=64563 receive_seq=64562 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=636017 sysload=0.18 cputime=153.872 memavail=716948 print_time=2324.359 buffer_time=2.282 print_stall=0 extruder: target=200 temp=200.2 pwm=0.608
Stats 2320.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2862109 bytes_read=979992 bytes_retransmit=9 bytes_invalid=0 send_seq=64586 receive_seq=64585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.9 mcu_temp: temp=38.8 sd_pos=636153 sysload=0.18 cputime=153.942 memavail=716556 print_time=2325.121 buffer_time=2.041 print_stall=0 extruder: target=200 temp=200.3 pwm=0.608
Stats 2321.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2863863 bytes_read=980484 bytes_retransmit=9 bytes_invalid=0 send_seq=64622 receive_seq=64621 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=636423 sysload=0.18 cputime=154.014 memavail=716816 print_time=2326.296 buffer_time=2.213 print_stall=0 extruder: target=200 temp=200.4 pwm=0.608
Stats 2322.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=2866123 bytes_read=981003 bytes_retransmit=9 bytes_invalid=0 send_seq=64666 receive_seq=64665 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=636870 sysload=0.16 cputime=154.089 memavail=717576 print_time=2327.332 buffer_time=2.246 print_stall=0 extruder: target=200 temp=200.4 pwm=0.611
Stats 2323.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=2868281 bytes_read=981513 bytes_retransmit=9 bytes_invalid=0 send_seq=64709 receive_seq=64708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=637112 sysload=0.16 cputime=154.163 memavail=717576 print_time=2328.511 buffer_time=2.423 print_stall=0 extruder: target=200 temp=200.5 pwm=0.611
Stats 2324.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=2870259 bytes_read=982022 bytes_retransmit=9 bytes_invalid=0 send_seq=64750 receive_seq=64750 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=637382 sysload=0.16 cputime=154.235 memavail=717108 print_time=2329.346 buffer_time=2.254 print_stall=0 extruder: target=200 temp=200.4 pwm=0.611
Stats 2325.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000051 bytes_write=2872176 bytes_read=982493 bytes_retransmit=9 bytes_invalid=0 send_seq=64788 receive_seq=64788 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=637653 sysload=0.16 cputime=154.309 memavail=716388 print_time=2330.180 buffer_time=2.085 print_stall=0 extruder: target=200 temp=200.4 pwm=0.611
Stats 2326.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2873587 bytes_read=982967 bytes_retransmit=9 bytes_invalid=0 send_seq=64820 receive_seq=64820 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=637923 sysload=0.16 cputime=154.383 memavail=716664 print_time=2331.111 buffer_time=2.014 print_stall=0 extruder: target=200 temp=200.3 pwm=0.695
Stats 2327.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2875586 bytes_read=983474 bytes_retransmit=9 bytes_invalid=0 send_seq=64860 receive_seq=64859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996559 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=638258 sysload=0.15 cputime=154.458 memavail=716676 print_time=2332.098 buffer_time=1.997 print_stall=0 extruder: target=200 temp=200.2 pwm=0.695
Stats 2328.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2878035 bytes_read=984014 bytes_retransmit=9 bytes_invalid=0 send_seq=64908 receive_seq=64908 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.4 mcu_temp: temp=39.1 sd_pos=638601 sysload=0.15 cputime=154.537 memavail=717400 print_time=2333.501 buffer_time=2.397 print_stall=0 extruder: target=200 temp=200.1 pwm=0.695
Stats 2329.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2878962 bytes_read=984423 bytes_retransmit=9 bytes_invalid=0 send_seq=64930 receive_seq=64930 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.358 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=638737 sysload=0.15 cputime=154.605 memavail=716984 print_time=2334.259 buffer_time=2.153 print_stall=0 extruder: target=200 temp=200.1 pwm=0.695
Stats 2330.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2880763 bytes_read=984925 bytes_retransmit=9 bytes_invalid=0 send_seq=64968 receive_seq=64968 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=59.9 pwm=0.528 raspberry_pi: temp=45.0 mcu_temp: temp=38.9 sd_pos=639004 sysload=0.15 cputime=154.680 memavail=716732 print_time=2335.583 buffer_time=2.474 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 2331.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2881755 bytes_read=985344 bytes_retransmit=9 bytes_invalid=0 send_seq=64993 receive_seq=64992 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.257 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=639136 sysload=0.15 cputime=154.750 memavail=716740 print_time=2336.149 buffer_time=2.037 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 2332.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2884744 bytes_read=985942 bytes_retransmit=9 bytes_invalid=0 send_seq=65049 receive_seq=65049 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=639607 sysload=0.30 cputime=154.825 memavail=716504 print_time=2337.633 buffer_time=2.518 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 2333.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2887060 bytes_read=986470 bytes_retransmit=9 bytes_invalid=0 send_seq=65096 receive_seq=65095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.9 mcu_temp: temp=39.0 sd_pos=639956 sysload=0.30 cputime=154.901 memavail=717060 print_time=2338.684 buffer_time=2.568 print_stall=0 extruder: target=200 temp=200.1 pwm=0.629
Stats 2334.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2888149 bytes_read=986884 bytes_retransmit=9 bytes_invalid=0 send_seq=65121 receive_seq=65121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.6 mcu_temp: temp=38.9 sd_pos=640092 sysload=0.30 cputime=154.968 memavail=717324 print_time=2339.290 buffer_time=2.170 print_stall=0 extruder: target=200 temp=200.1 pwm=0.629
Stats 2335.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2890056 bytes_read=987387 bytes_retransmit=9 bytes_invalid=0 send_seq=65159 receive_seq=65159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.5 mcu_temp: temp=39.2 sd_pos=640488 sysload=0.30 cputime=155.042 memavail=717868 print_time=2340.208 buffer_time=2.086 print_stall=0 extruder: target=200 temp=200.2 pwm=0.629
Stats 2336.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2891259 bytes_read=987830 bytes_retransmit=9 bytes_invalid=0 send_seq=65185 receive_seq=65185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=45.2 mcu_temp: temp=38.9 sd_pos=640580 sysload=0.30 cputime=155.114 memavail=717868 print_time=2341.152 buffer_time=2.026 print_stall=0 extruder: target=200 temp=200.2 pwm=0.629
Stats 2337.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=2892393 bytes_read=988249 bytes_retransmit=9 bytes_invalid=0 send_seq=65212 receive_seq=65212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=45.3 mcu_temp: temp=39.1 sd_pos=640673 sysload=0.35 cputime=155.185 memavail=717896 print_time=2342.458 buffer_time=2.330 print_stall=0 extruder: target=200 temp=200.1 pwm=0.670
Stats 2338.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=2893364 bytes_read=988682 bytes_retransmit=9 bytes_invalid=0 send_seq=65236 receive_seq=65236 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=45.1 mcu_temp: temp=39.1 sd_pos=640775 sysload=0.35 cputime=155.256 memavail=717648 print_time=2343.404 buffer_time=2.273 print_stall=0 extruder: target=200 temp=200.2 pwm=0.613
Stats 2339.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=2894155 bytes_read=989085 bytes_retransmit=9 bytes_invalid=0 send_seq=65257 receive_seq=65257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.315 raspberry_pi: temp=45.1 mcu_temp: temp=39.1 sd_pos=640837 sysload=0.35 cputime=155.324 memavail=717648 print_time=2344.296 buffer_time=2.161 print_stall=0 extruder: target=200 temp=200.2 pwm=0.613
Stats 2340.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=2895104 bytes_read=989479 bytes_retransmit=9 bytes_invalid=0 send_seq=65279 receive_seq=65279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.393 raspberry_pi: temp=44.9 mcu_temp: temp=39.1 sd_pos=640939 sysload=0.35 cputime=155.400 memavail=717416 print_time=2345.265 buffer_time=2.129 print_stall=0 extruder: target=200 temp=200.1 pwm=0.613
Stats 2341.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=2896654 bytes_read=989977 bytes_retransmit=9 bytes_invalid=0 send_seq=65313 receive_seq=65313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=45.3 mcu_temp: temp=39.0 sd_pos=641059 sysload=0.35 cputime=155.473 memavail=717416 print_time=2346.695 buffer_time=2.555 print_stall=0 extruder: target=200 temp=200.1 pwm=0.613
Stats 2342.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2897750 bytes_read=990410 bytes_retransmit=9 bytes_invalid=0 send_seq=65340 receive_seq=65340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.324 raspberry_pi: temp=45.5 mcu_temp: temp=39.0 sd_pos=641423 sysload=0.49 cputime=155.544 memavail=717932 print_time=2347.169 buffer_time=2.028 print_stall=0 extruder: target=200 temp=200.0 pwm=0.642
Stats 2343.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2901037 bytes_read=990994 bytes_retransmit=9 bytes_invalid=0 send_seq=65401 receive_seq=65400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=642636 sysload=0.49 cputime=155.628 memavail=718224 print_time=2348.773 buffer_time=2.628 print_stall=0 extruder: target=200 temp=200.0 pwm=0.642
Stats 2344.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2902870 bytes_read=991521 bytes_retransmit=9 bytes_invalid=0 send_seq=65440 receive_seq=65440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=643246 sysload=0.49 cputime=155.711 memavail=718224 print_time=2349.615 buffer_time=2.467 print_stall=0 extruder: target=200 temp=199.9 pwm=0.711
Stats 2345.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2905001 bytes_read=992025 bytes_retransmit=9 bytes_invalid=0 send_seq=65484 receive_seq=65484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.390 raspberry_pi: temp=45.3 mcu_temp: temp=38.9 sd_pos=643949 sysload=0.49 cputime=155.788 memavail=717736 print_time=2350.592 buffer_time=2.440 print_stall=0 extruder: target=200 temp=199.7 pwm=0.711
Stats 2346.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2906675 bytes_read=992499 bytes_retransmit=9 bytes_invalid=0 send_seq=65519 receive_seq=65519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.5 mcu_temp: temp=39.2 sd_pos=644421 sysload=0.49 cputime=155.864 memavail=718244 print_time=2351.449 buffer_time=2.294 print_stall=0 extruder: target=200 temp=199.7 pwm=0.711
Stats 2347.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2908121 bytes_read=992976 bytes_retransmit=9 bytes_invalid=0 send_seq=65550 receive_seq=65549 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.9 mcu_temp: temp=38.9 sd_pos=644741 sysload=0.85 cputime=155.935 memavail=718016 print_time=2352.203 buffer_time=2.046 print_stall=0 extruder: target=200 temp=199.6 pwm=0.711
Stats 2348.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2909457 bytes_read=993410 bytes_retransmit=9 bytes_invalid=0 send_seq=65579 receive_seq=65579 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.313 raspberry_pi: temp=44.5 mcu_temp: temp=38.7 sd_pos=645078 sysload=0.85 cputime=156.012 memavail=718016 print_time=2353.473 buffer_time=2.308 print_stall=0 extruder: target=200 temp=199.6 pwm=0.741
Stats 2349.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2910119 bytes_read=993795 bytes_retransmit=9 bytes_invalid=0 send_seq=65598 receive_seq=65598 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996557 heater_bed: target=60 temp=60.0 pwm=0.426 raspberry_pi: temp=44.6 mcu_temp: temp=38.9 sd_pos=645247 sysload=0.85 cputime=156.085 memavail=717792 print_time=2354.240 buffer_time=2.075 print_stall=0 extruder: target=200 temp=199.6 pwm=0.741
Stats 2350.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2911769 bytes_read=994273 bytes_retransmit=9 bytes_invalid=0 send_seq=65633 receive_seq=65633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996555 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=645494 sysload=0.85 cputime=156.161 memavail=717808 print_time=2355.394 buffer_time=2.227 print_stall=0 extruder: target=200 temp=199.6 pwm=0.678
Stats 2351.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=2912135 bytes_read=994637 bytes_retransmit=9 bytes_invalid=0 send_seq=65646 receive_seq=65646 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996545 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=645526 sysload=0.85 cputime=156.231 memavail=717808 print_time=2356.223 buffer_time=2.052 print_stall=0 extruder: target=200 temp=199.7 pwm=0.678
Stats 2352.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2913533 bytes_read=995086 bytes_retransmit=9 bytes_invalid=0 send_seq=65677 receive_seq=65676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996550 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=645690 sysload=0.78 cputime=156.304 memavail=718060 print_time=2359.119 buffer_time=3.945 print_stall=0 extruder: target=200 temp=199.8 pwm=0.678
Stats 2353.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2913674 bytes_read=995453 bytes_retransmit=9 bytes_invalid=0 send_seq=65687 receive_seq=65687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996550 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=645690 sysload=0.78 cputime=156.373 memavail=717808 print_time=2359.119 buffer_time=2.942 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 2354.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2914946 bytes_read=995877 bytes_retransmit=9 bytes_invalid=0 send_seq=65716 receive_seq=65715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996549 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=645889 sysload=0.78 cputime=156.443 memavail=717808 print_time=2359.795 buffer_time=2.615 print_stall=0 extruder: target=200 temp=200.0 pwm=0.607
Stats 2355.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2916037 bytes_read=996311 bytes_retransmit=9 bytes_invalid=0 send_seq=65742 receive_seq=65742 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996548 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=646169 sysload=0.78 cputime=156.514 memavail=717308 print_time=2360.492 buffer_time=2.308 print_stall=0 extruder: target=200 temp=200.1 pwm=0.607
Stats 2356.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2917988 bytes_read=996808 bytes_retransmit=9 bytes_invalid=0 send_seq=65780 receive_seq=65779 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996556 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=646586 sysload=0.78 cputime=156.592 memavail=717308 print_time=2361.600 buffer_time=2.414 print_stall=0 extruder: target=200 temp=200.2 pwm=0.607
Stats 2357.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2920166 bytes_read=997327 bytes_retransmit=9 bytes_invalid=0 send_seq=65823 receive_seq=65823 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996556 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=647106 sysload=0.72 cputime=156.671 memavail=717316 print_time=2362.667 buffer_time=2.478 print_stall=0 extruder: target=200 temp=200.2 pwm=0.607
Stats 2358.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2921459 bytes_read=997776 bytes_retransmit=9 bytes_invalid=0 send_seq=65853 receive_seq=65853 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996554 heater_bed: target=60 temp=60.0 pwm=0.334 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=647254 sysload=0.72 cputime=156.743 memavail=717316 print_time=2363.322 buffer_time=2.130 print_stall=0 extruder: target=200 temp=200.2 pwm=0.665
Stats 2359.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2923762 bytes_read=998313 bytes_retransmit=9 bytes_invalid=0 send_seq=65898 receive_seq=65898 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=647703 sysload=0.72 cputime=156.821 memavail=717316 print_time=2364.716 buffer_time=2.522 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 2360.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2925407 bytes_read=998762 bytes_retransmit=9 bytes_invalid=0 send_seq=65932 receive_seq=65931 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=44.5 mcu_temp: temp=39.1 sd_pos=647980 sysload=0.72 cputime=156.901 memavail=717064 print_time=2365.544 buffer_time=2.342 print_stall=0 extruder: target=200 temp=200.1 pwm=0.665
Stats 2361.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2926167 bytes_read=999176 bytes_retransmit=9 bytes_invalid=0 send_seq=65951 receive_seq=65951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=648050 sysload=0.66 cputime=156.973 memavail=716832 print_time=2366.204 buffer_time=2.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.665
Stats 2362.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2927321 bytes_read=999628 bytes_retransmit=9 bytes_invalid=0 send_seq=65979 receive_seq=65979 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996566 heater_bed: target=60 temp=60.0 pwm=0.288 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=648144 sysload=0.66 cputime=157.046 memavail=716832 print_time=2367.511 buffer_time=2.307 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2363.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2928296 bytes_read=1000027 bytes_retransmit=9 bytes_invalid=0 send_seq=66003 receive_seq=66002 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.320 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=648244 sysload=0.66 cputime=157.118 memavail=716836 print_time=2368.457 buffer_time=2.249 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2364.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2929110 bytes_read=1000455 bytes_retransmit=9 bytes_invalid=0 send_seq=66025 receive_seq=66025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=648306 sysload=0.66 cputime=157.190 memavail=716952 print_time=2369.348 buffer_time=2.136 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2365.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2930105 bytes_read=1000883 bytes_retransmit=9 bytes_invalid=0 send_seq=66051 receive_seq=66051 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=648408 sysload=0.66 cputime=157.262 memavail=716952 print_time=2370.318 buffer_time=2.103 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2366.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2931669 bytes_read=1001337 bytes_retransmit=9 bytes_invalid=0 send_seq=66086 receive_seq=66085 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=648528 sysload=0.77 cputime=157.337 memavail=716964 print_time=2371.747 buffer_time=2.529 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2367.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2932749 bytes_read=1001795 bytes_retransmit=9 bytes_invalid=0 send_seq=66112 receive_seq=66111 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.2 mcu_temp: temp=39.2 sd_pos=648895 sysload=0.77 cputime=157.411 memavail=716764 print_time=2372.222 buffer_time=1.999 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 2368.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2936106 bytes_read=1002413 bytes_retransmit=9 bytes_invalid=0 send_seq=66175 receive_seq=66175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=650110 sysload=0.77 cputime=157.502 memavail=716764 print_time=2373.825 buffer_time=2.600 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 2370.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2937910 bytes_read=1002887 bytes_retransmit=9 bytes_invalid=0 send_seq=66213 receive_seq=66213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.462 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=650721 sysload=0.77 cputime=157.578 memavail=716544 print_time=2374.667 buffer_time=2.439 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 2371.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2940042 bytes_read=1003420 bytes_retransmit=9 bytes_invalid=0 send_seq=66258 receive_seq=66257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=651424 sysload=0.77 cputime=157.657 memavail=716548 print_time=2375.645 buffer_time=2.414 print_stall=0 extruder: target=200 temp=199.9 pwm=0.670
Stats 2372.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2941712 bytes_read=1003913 bytes_retransmit=9 bytes_invalid=0 send_seq=66293 receive_seq=66293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=651896 sysload=0.70 cputime=157.737 memavail=716872 print_time=2376.501 buffer_time=2.269 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 2373.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2943175 bytes_read=1004362 bytes_retransmit=9 bytes_invalid=0 send_seq=66326 receive_seq=66326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.452 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=652217 sysload=0.70 cputime=157.813 memavail=717124 print_time=2377.256 buffer_time=2.021 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 2374.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2944504 bytes_read=1004815 bytes_retransmit=9 bytes_invalid=0 send_seq=66355 receive_seq=66354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.377 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=652554 sysload=0.70 cputime=157.891 memavail=717124 print_time=2378.525 buffer_time=2.287 print_stall=0 extruder: target=200 temp=199.8 pwm=0.691
Stats 2375.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2945163 bytes_read=1005210 bytes_retransmit=9 bytes_invalid=0 send_seq=66374 receive_seq=66374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.315 raspberry_pi: temp=44.3 mcu_temp: temp=39.1 sd_pos=652722 sysload=0.70 cputime=157.963 memavail=717656 print_time=2379.293 buffer_time=2.051 print_stall=0 extruder: target=200 temp=199.8 pwm=0.691
Stats 2376.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=2946829 bytes_read=1005659 bytes_retransmit=9 bytes_invalid=0 send_seq=66409 receive_seq=66409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=652965 sysload=0.70 cputime=158.039 memavail=717904 print_time=2380.447 buffer_time=2.201 print_stall=0 extruder: target=200 temp=199.8 pwm=0.683
Stats 2377.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2947178 bytes_read=1006062 bytes_retransmit=9 bytes_invalid=0 send_seq=66422 receive_seq=66422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=652997 sysload=0.65 cputime=158.109 memavail=717928 print_time=2381.276 buffer_time=2.027 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2378.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2948558 bytes_read=1006496 bytes_retransmit=9 bytes_invalid=0 send_seq=66452 receive_seq=66452 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=653159 sysload=0.65 cputime=158.186 memavail=717624 print_time=2384.172 buffer_time=3.921 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2379.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2948715 bytes_read=1006835 bytes_retransmit=9 bytes_invalid=0 send_seq=66463 receive_seq=66463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=653159 sysload=0.65 cputime=158.253 memavail=717680 print_time=2384.172 buffer_time=2.918 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2380.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2950015 bytes_read=1007307 bytes_retransmit=9 bytes_invalid=0 send_seq=66492 receive_seq=66492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.420 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=653394 sysload=0.65 cputime=158.328 memavail=717680 print_time=2384.855 buffer_time=2.598 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 2381.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2951056 bytes_read=1007706 bytes_retransmit=9 bytes_invalid=0 send_seq=66516 receive_seq=66515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=43.6 mcu_temp: temp=38.8 sd_pos=653673 sysload=0.65 cputime=158.400 memavail=717680 print_time=2385.531 buffer_time=2.270 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 2382.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2953014 bytes_read=1008215 bytes_retransmit=9 bytes_invalid=0 send_seq=66555 receive_seq=66554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=654091 sysload=0.60 cputime=158.482 memavail=717932 print_time=2386.652 buffer_time=2.386 print_stall=0 extruder: target=200 temp=200.0 pwm=0.669
Stats 2383.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2955247 bytes_read=1008773 bytes_retransmit=9 bytes_invalid=0 send_seq=66601 receive_seq=66601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996624 heater_bed: target=60 temp=60.0 pwm=0.432 raspberry_pi: temp=43.5 mcu_temp: temp=39.2 sd_pos=654607 sysload=0.60 cputime=158.561 memavail=717440 print_time=2387.724 buffer_time=2.456 print_stall=0 extruder: target=200 temp=200.1 pwm=0.619
Stats 2384.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2956535 bytes_read=1009207 bytes_retransmit=9 bytes_invalid=0 send_seq=66631 receive_seq=66631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996618 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=654714 sysload=0.60 cputime=158.633 memavail=717440 print_time=2388.381 buffer_time=2.109 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Stats 2385.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2958824 bytes_read=1009726 bytes_retransmit=9 bytes_invalid=0 send_seq=66675 receive_seq=66675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=655170 sysload=0.60 cputime=158.712 memavail=717640 print_time=2389.773 buffer_time=2.499 print_stall=0 extruder: target=200 temp=199.9 pwm=0.735
Stats 2386.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2960422 bytes_read=1010203 bytes_retransmit=9 bytes_invalid=0 send_seq=66709 receive_seq=66708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=655447 sysload=0.60 cputime=158.793 memavail=717696 print_time=2390.603 buffer_time=2.325 print_stall=0 extruder: target=200 temp=199.9 pwm=0.735
Stats 2387.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2961521 bytes_read=1010633 bytes_retransmit=9 bytes_invalid=0 send_seq=66735 receive_seq=66734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=655549 sysload=0.55 cputime=158.868 memavail=718156 print_time=2391.702 buffer_time=2.423 print_stall=0 extruder: target=200 temp=199.9 pwm=0.677
Stats 2388.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2962321 bytes_read=1011042 bytes_retransmit=9 bytes_invalid=0 send_seq=66756 receive_seq=66756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=655611 sysload=0.55 cputime=158.940 memavail=717732 print_time=2392.569 buffer_time=2.287 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 2389.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2963290 bytes_read=1011469 bytes_retransmit=9 bytes_invalid=0 send_seq=66779 receive_seq=66779 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.411 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=655713 sysload=0.55 cputime=159.013 memavail=717732 print_time=2393.515 buffer_time=2.230 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 2390.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2964096 bytes_read=1011853 bytes_retransmit=9 bytes_invalid=0 send_seq=66800 receive_seq=66799 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=655775 sysload=0.55 cputime=159.085 memavail=717732 print_time=2394.407 buffer_time=2.117 print_stall=0 extruder: target=200 temp=200.0 pwm=0.677
Stats 2391.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2965057 bytes_read=1012267 bytes_retransmit=9 bytes_invalid=0 send_seq=66822 receive_seq=66822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.469 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=655876 sysload=0.55 cputime=159.158 memavail=717776 print_time=2395.377 buffer_time=2.084 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 2392.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2966610 bytes_read=1012764 bytes_retransmit=9 bytes_invalid=0 send_seq=66856 receive_seq=66856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.361 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=655996 sysload=0.50 cputime=159.233 memavail=716808 print_time=2396.806 buffer_time=2.510 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 2393.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2968946 bytes_read=1013273 bytes_retransmit=9 bytes_invalid=0 send_seq=66901 receive_seq=66901 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.361 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=656872 sysload=0.50 cputime=159.314 memavail=716808 print_time=2397.979 buffer_time=2.681 print_stall=0 extruder: target=200 temp=200.2 pwm=0.631
Stats 2394.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2971042 bytes_read=1013797 bytes_retransmit=9 bytes_invalid=0 send_seq=66946 receive_seq=66946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=657580 sysload=0.50 cputime=159.391 memavail=717044 print_time=2398.884 buffer_time=2.585 print_stall=0 extruder: target=200 temp=200.2 pwm=0.631
Stats 2395.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2972818 bytes_read=1014294 bytes_retransmit=9 bytes_invalid=0 send_seq=66983 receive_seq=66983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=658189 sysload=0.50 cputime=159.465 memavail=716804 print_time=2399.726 buffer_time=2.424 print_stall=0 extruder: target=200 temp=200.2 pwm=0.601
Stats 2396.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2974944 bytes_read=1014793 bytes_retransmit=9 bytes_invalid=0 send_seq=67027 receive_seq=67026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=658892 sysload=0.50 cputime=159.540 memavail=717316 print_time=2400.703 buffer_time=2.399 print_stall=0 extruder: target=200 temp=200.2 pwm=0.652
Stats 2397.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2976607 bytes_read=1015287 bytes_retransmit=9 bytes_invalid=0 send_seq=67062 receive_seq=67062 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=659365 sysload=0.70 cputime=159.612 memavail=717152 print_time=2401.560 buffer_time=2.255 print_stall=0 extruder: target=200 temp=200.2 pwm=0.652
Stats 2398.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2978072 bytes_read=1015764 bytes_retransmit=9 bytes_invalid=0 send_seq=67095 receive_seq=67095 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=659685 sysload=0.70 cputime=159.684 memavail=717472 print_time=2402.314 buffer_time=2.009 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 2399.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2979394 bytes_read=1016198 bytes_retransmit=9 bytes_invalid=0 send_seq=67125 receive_seq=67125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.339 raspberry_pi: temp=44.4 mcu_temp: temp=39.1 sd_pos=660022 sysload=0.70 cputime=159.756 memavail=718116 print_time=2403.584 buffer_time=2.278 print_stall=0 extruder: target=200 temp=200.0 pwm=0.652
Stats 2400.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2980084 bytes_read=1016597 bytes_retransmit=9 bytes_invalid=0 send_seq=67145 receive_seq=67145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.460 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=660189 sysload=0.70 cputime=159.824 memavail=718116 print_time=2404.351 buffer_time=2.044 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 2401.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=2981721 bytes_read=1017074 bytes_retransmit=9 bytes_invalid=0 send_seq=67180 receive_seq=67180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=660436 sysload=0.70 cputime=159.897 memavail=717864 print_time=2405.505 buffer_time=2.197 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 2402.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2982074 bytes_read=1017431 bytes_retransmit=9 bytes_invalid=0 send_seq=67193 receive_seq=67193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=660468 sysload=0.65 cputime=159.959 memavail=717320 print_time=2406.334 buffer_time=2.026 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 2403.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2983504 bytes_read=1017904 bytes_retransmit=9 bytes_invalid=0 send_seq=67225 receive_seq=67225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.300 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=660632 sysload=0.65 cputime=160.028 memavail=717572 print_time=2409.232 buffer_time=3.923 print_stall=0 extruder: target=200 temp=199.8 pwm=0.708
Stats 2404.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2983693 bytes_read=1018262 bytes_retransmit=9 bytes_invalid=0 send_seq=67238 receive_seq=67237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=44.8 mcu_temp: temp=39.0 sd_pos=660632 sysload=0.65 cputime=160.088 memavail=717572 print_time=2409.232 buffer_time=2.922 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 2405.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2984998 bytes_read=1018696 bytes_retransmit=9 bytes_invalid=0 send_seq=67268 receive_seq=67267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=660865 sysload=0.65 cputime=160.152 memavail=717824 print_time=2409.924 buffer_time=2.614 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 2406.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2986075 bytes_read=1019144 bytes_retransmit=9 bytes_invalid=0 send_seq=67294 receive_seq=67294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=661108 sysload=0.65 cputime=160.217 memavail=717332 print_time=2410.595 buffer_time=2.282 print_stall=0 extruder: target=200 temp=200.0 pwm=0.613
Stats 2407.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2988023 bytes_read=1019647 bytes_retransmit=9 bytes_invalid=0 send_seq=67332 receive_seq=67332 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=661523 sysload=0.60 cputime=160.288 memavail=716828 print_time=2411.699 buffer_time=2.383 print_stall=0 extruder: target=200 temp=200.1 pwm=0.613
Stats 2408.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2990221 bytes_read=1020146 bytes_retransmit=9 bytes_invalid=0 send_seq=67375 receive_seq=67375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=44.7 mcu_temp: temp=38.9 sd_pos=662037 sysload=0.60 cputime=160.358 memavail=717784 print_time=2412.756 buffer_time=2.439 print_stall=0 extruder: target=200 temp=200.1 pwm=0.613
Stats 2409.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2991558 bytes_read=1020609 bytes_retransmit=9 bytes_invalid=0 send_seq=67405 receive_seq=67405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.272 raspberry_pi: temp=45.3 mcu_temp: temp=38.8 sd_pos=662145 sysload=0.60 cputime=160.419 memavail=717312 print_time=2413.441 buffer_time=2.123 print_stall=0 extruder: target=200 temp=200.2 pwm=0.613
Stats 2410.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2993950 bytes_read=1021142 bytes_retransmit=9 bytes_invalid=0 send_seq=67452 receive_seq=67452 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.6 mcu_temp: temp=38.7 sd_pos=662602 sysload=0.60 cputime=160.486 memavail=717320 print_time=2414.857 buffer_time=2.538 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 2411.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=2995513 bytes_read=1021586 bytes_retransmit=9 bytes_invalid=0 send_seq=67485 receive_seq=67484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.9 mcu_temp: temp=39.0 sd_pos=662878 sysload=0.60 cputime=160.553 memavail=716876 print_time=2415.664 buffer_time=2.343 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 2412.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2996297 bytes_read=1022019 bytes_retransmit=9 bytes_invalid=0 send_seq=67505 receive_seq=67505 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=662948 sysload=0.55 cputime=160.614 memavail=716656 print_time=2416.324 buffer_time=2.003 print_stall=0 extruder: target=200 temp=200.1 pwm=0.648
Stats 2413.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2997411 bytes_read=1022447 bytes_retransmit=9 bytes_invalid=0 send_seq=67531 receive_seq=67531 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.8 mcu_temp: temp=39.0 sd_pos=663042 sysload=0.55 cputime=160.677 memavail=717168 print_time=2417.631 buffer_time=2.309 print_stall=0 extruder: target=200 temp=200.0 pwm=0.648
Stats 2414.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2998357 bytes_read=1022846 bytes_retransmit=9 bytes_invalid=0 send_seq=67554 receive_seq=67554 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=44.8 mcu_temp: temp=38.9 sd_pos=663143 sysload=0.55 cputime=160.738 memavail=717420 print_time=2418.576 buffer_time=2.254 print_stall=0 extruder: target=200 temp=200.0 pwm=0.648
Stats 2415.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=2999162 bytes_read=1023264 bytes_retransmit=9 bytes_invalid=0 send_seq=67576 receive_seq=67575 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=44.6 mcu_temp: temp=38.9 sd_pos=663205 sysload=0.55 cputime=160.798 memavail=716944 print_time=2419.468 buffer_time=2.145 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Stats 2416.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3000118 bytes_read=1023682 bytes_retransmit=9 bytes_invalid=0 send_seq=67600 receive_seq=67599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.408 raspberry_pi: temp=44.8 mcu_temp: temp=38.9 sd_pos=663307 sysload=0.55 cputime=160.859 memavail=717196 print_time=2420.438 buffer_time=2.113 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Stats 2417.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3001689 bytes_read=1024141 bytes_retransmit=9 bytes_invalid=0 send_seq=67635 receive_seq=67634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.7 mcu_temp: temp=38.9 sd_pos=663421 sysload=0.50 cputime=160.920 memavail=717448 print_time=2421.867 buffer_time=2.539 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 2418.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3002748 bytes_read=1024594 bytes_retransmit=9 bytes_invalid=0 send_seq=67660 receive_seq=67659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=663784 sysload=0.50 cputime=160.984 memavail=717272 print_time=2422.341 buffer_time=2.012 print_stall=0 extruder: target=200 temp=199.9 pwm=0.673
Stats 2419.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3006049 bytes_read=1025202 bytes_retransmit=9 bytes_invalid=0 send_seq=67722 receive_seq=67721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.479 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=665000 sysload=0.50 cputime=161.061 memavail=716992 print_time=2423.945 buffer_time=2.614 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 2420.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3007847 bytes_read=1025671 bytes_retransmit=9 bytes_invalid=0 send_seq=67759 receive_seq=67758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.5 mcu_temp: temp=39.1 sd_pos=665611 sysload=0.50 cputime=161.127 memavail=717052 print_time=2424.787 buffer_time=2.454 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 2421.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3009987 bytes_read=1026204 bytes_retransmit=9 bytes_invalid=0 send_seq=67802 receive_seq=67802 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=666314 sysload=0.50 cputime=161.196 memavail=716800 print_time=2425.764 buffer_time=2.429 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 2422.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3011640 bytes_read=1026667 bytes_retransmit=9 bytes_invalid=0 send_seq=67836 receive_seq=67835 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=43.9 mcu_temp: temp=38.8 sd_pos=666786 sysload=0.46 cputime=161.260 memavail=716800 print_time=2426.621 buffer_time=2.285 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 2423.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3014027 bytes_read=1027201 bytes_retransmit=9 bytes_invalid=0 send_seq=67882 receive_seq=67882 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.442 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=667143 sysload=0.46 cputime=161.327 memavail=716324 print_time=2427.937 buffer_time=2.599 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 2424.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3014622 bytes_read=1027599 bytes_retransmit=9 bytes_invalid=0 send_seq=67899 receive_seq=67899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.7 mcu_temp: temp=38.9 sd_pos=667213 sysload=0.46 cputime=161.388 memavail=716828 print_time=2428.978 buffer_time=2.638 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 2425.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3014979 bytes_read=1027962 bytes_retransmit=9 bytes_invalid=0 send_seq=67913 receive_seq=67912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=44.3 mcu_temp: temp=38.9 sd_pos=667245 sysload=0.46 cputime=161.447 memavail=716832 print_time=2429.798 buffer_time=2.456 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 2426.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3015879 bytes_read=1028353 bytes_retransmit=9 bytes_invalid=0 send_seq=67935 receive_seq=67934 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=667346 sysload=0.46 cputime=161.507 memavail=717588 print_time=2431.731 buffer_time=3.387 print_stall=0 extruder: target=200 temp=199.8 pwm=0.702
Stats 2427.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3016063 bytes_read=1028713 bytes_retransmit=9 bytes_invalid=0 send_seq=67947 receive_seq=67946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=667346 sysload=0.43 cputime=161.563 memavail=717844 print_time=2431.731 buffer_time=2.386 print_stall=0 extruder: target=200 temp=199.8 pwm=0.683
Stats 2428.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3017542 bytes_read=1029182 bytes_retransmit=9 bytes_invalid=0 send_seq=67979 receive_seq=67978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.2 mcu_temp: temp=38.8 sd_pos=667612 sysload=0.43 cputime=161.629 memavail=717172 print_time=2432.783 buffer_time=2.437 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2429.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3018200 bytes_read=1029556 bytes_retransmit=9 bytes_invalid=0 send_seq=67997 receive_seq=67996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=44.6 mcu_temp: temp=38.9 sd_pos=667748 sysload=0.43 cputime=161.688 memavail=717172 print_time=2433.532 buffer_time=2.184 print_stall=0 extruder: target=200 temp=200.0 pwm=0.617
Stats 2430.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3019996 bytes_read=1030073 bytes_retransmit=9 bytes_invalid=0 send_seq=68034 receive_seq=68034 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.7 mcu_temp: temp=38.7 sd_pos=668144 sysload=0.43 cputime=161.757 memavail=717676 print_time=2435.185 buffer_time=2.836 print_stall=0 extruder: target=200 temp=200.1 pwm=0.617
Stats 2431.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3021031 bytes_read=1030472 bytes_retransmit=9 bytes_invalid=0 send_seq=68058 receive_seq=68057 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=668443 sysload=0.43 cputime=161.819 memavail=717424 print_time=2435.663 buffer_time=2.313 print_stall=0 extruder: target=200 temp=200.1 pwm=0.617
Stats 2432.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3023061 bytes_read=1030981 bytes_retransmit=9 bytes_invalid=0 send_seq=68099 receive_seq=68099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996613 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.7 mcu_temp: temp=38.8 sd_pos=668843 sysload=0.39 cputime=161.886 memavail=717680 print_time=2436.764 buffer_time=2.412 print_stall=0 extruder: target=200 temp=200.1 pwm=0.617
Stats 2433.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3024614 bytes_read=1031468 bytes_retransmit=9 bytes_invalid=0 send_seq=68132 receive_seq=68131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.5 mcu_temp: temp=39.1 sd_pos=669066 sysload=0.39 cputime=161.951 memavail=716392 print_time=2437.598 buffer_time=2.246 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 2434.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3026728 bytes_read=1031967 bytes_retransmit=9 bytes_invalid=0 send_seq=68175 receive_seq=68174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.3 mcu_temp: temp=38.9 sd_pos=669443 sysload=0.39 cputime=162.017 memavail=716704 print_time=2438.681 buffer_time=2.326 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 2435.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3028770 bytes_read=1032456 bytes_retransmit=9 bytes_invalid=0 send_seq=68216 receive_seq=68215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=669822 sysload=0.39 cputime=162.085 memavail=716244 print_time=2439.822 buffer_time=2.465 print_stall=0 extruder: target=200 temp=200.1 pwm=0.672
Stats 2436.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3030875 bytes_read=1033003 bytes_retransmit=9 bytes_invalid=0 send_seq=68259 receive_seq=68259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=670133 sysload=0.39 cputime=162.154 memavail=716516 print_time=2441.011 buffer_time=2.653 print_stall=0 extruder: target=200 temp=200.0 pwm=0.672
Stats 2437.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3032050 bytes_read=1033437 bytes_retransmit=9 bytes_invalid=0 send_seq=68287 receive_seq=68286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.3 mcu_temp: temp=38.8 sd_pos=670371 sysload=0.44 cputime=162.221 memavail=716288 print_time=2441.495 buffer_time=2.133 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2438.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3033091 bytes_read=1033861 bytes_retransmit=9 bytes_invalid=0 send_seq=68311 receive_seq=68311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=670473 sysload=0.44 cputime=162.285 memavail=715804 print_time=2442.594 buffer_time=2.231 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2439.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3033872 bytes_read=1034273 bytes_retransmit=9 bytes_invalid=0 send_seq=68331 receive_seq=68331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=670535 sysload=0.44 cputime=162.345 memavail=715216 print_time=2443.462 buffer_time=2.098 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2440.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3034825 bytes_read=1034672 bytes_retransmit=9 bytes_invalid=0 send_seq=68354 receive_seq=68354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.321 raspberry_pi: temp=44.0 mcu_temp: temp=38.8 sd_pos=670636 sysload=0.44 cputime=162.408 memavail=715520 print_time=2444.408 buffer_time=2.043 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2441.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3036100 bytes_read=1035132 bytes_retransmit=9 bytes_invalid=0 send_seq=68384 receive_seq=68384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=43.8 mcu_temp: temp=38.9 sd_pos=670768 sysload=0.44 cputime=162.471 memavail=715520 print_time=2445.806 buffer_time=2.441 print_stall=0 extruder: target=200 temp=200.1 pwm=0.661
Stats 2442.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3037958 bytes_read=1035649 bytes_retransmit=9 bytes_invalid=0 send_seq=68422 receive_seq=68422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=670916 sysload=0.49 cputime=162.535 memavail=715532 print_time=2447.698 buffer_time=3.332 print_stall=0 extruder: target=200 temp=200.0 pwm=0.661
Stats 2443.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3038115 bytes_read=1035983 bytes_retransmit=9 bytes_invalid=0 send_seq=68433 receive_seq=68432 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.341 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=670916 sysload=0.49 cputime=162.591 memavail=715548 print_time=2447.698 buffer_time=2.331 print_stall=0 extruder: target=200 temp=200.0 pwm=0.661
Stats 2444.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3040446 bytes_read=1036512 bytes_retransmit=9 bytes_invalid=0 send_seq=68479 receive_seq=68478 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=671788 sysload=0.49 cputime=162.664 memavail=715560 print_time=2448.872 buffer_time=2.504 print_stall=0 extruder: target=200 temp=200.1 pwm=0.661
Stats 2445.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3042486 bytes_read=1037024 bytes_retransmit=9 bytes_invalid=0 send_seq=68519 receive_seq=68518 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=43.4 mcu_temp: temp=38.9 sd_pos=672494 sysload=0.49 cputime=162.732 memavail=715316 print_time=2449.776 buffer_time=2.409 print_stall=0 extruder: target=200 temp=200.0 pwm=0.693
Stats 2446.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3044280 bytes_read=1037493 bytes_retransmit=9 bytes_invalid=0 send_seq=68556 receive_seq=68555 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.353 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=673100 sysload=0.49 cputime=162.805 memavail=715340 print_time=2450.618 buffer_time=2.250 print_stall=0 extruder: target=200 temp=200.0 pwm=0.693
Stats 2447.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3046438 bytes_read=1038012 bytes_retransmit=9 bytes_invalid=0 send_seq=68600 receive_seq=68599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=673804 sysload=0.61 cputime=162.876 memavail=715540 print_time=2451.596 buffer_time=2.226 print_stall=0 extruder: target=200 temp=200.0 pwm=0.693
Stats 2448.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3048093 bytes_read=1038514 bytes_retransmit=9 bytes_invalid=0 send_seq=68634 receive_seq=68634 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=674276 sysload=0.61 cputime=162.945 memavail=715904 print_time=2452.452 buffer_time=2.080 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 2449.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3050299 bytes_read=1039013 bytes_retransmit=9 bytes_invalid=0 send_seq=68677 receive_seq=68677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=674765 sysload=0.61 cputime=163.015 memavail=715928 print_time=2454.031 buffer_time=2.658 print_stall=0 extruder: target=200 temp=199.9 pwm=0.693
Stats 2450.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3050875 bytes_read=1039392 bytes_retransmit=9 bytes_invalid=0 send_seq=68694 receive_seq=68693 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=674932 sysload=0.61 cputime=163.075 memavail=715948 print_time=2454.476 buffer_time=2.100 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 2451.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3052609 bytes_read=1039889 bytes_retransmit=9 bytes_invalid=0 send_seq=68730 receive_seq=68730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.412 raspberry_pi: temp=43.9 mcu_temp: temp=39.1 sd_pos=675286 sysload=0.61 cputime=163.148 memavail=715948 print_time=2456.114 buffer_time=2.736 print_stall=0 extruder: target=200 temp=199.9 pwm=0.708
Stats 2452.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3053186 bytes_read=1040244 bytes_retransmit=9 bytes_invalid=0 send_seq=68747 receive_seq=68746 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.422 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=675345 sysload=0.64 cputime=163.208 memavail=715712 print_time=2456.398 buffer_time=2.018 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 2453.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3053730 bytes_read=1040628 bytes_retransmit=9 bytes_invalid=0 send_seq=68763 receive_seq=68762 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.368 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=675409 sysload=0.64 cputime=163.269 memavail=715276 print_time=2458.046 buffer_time=2.666 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 2454.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3054972 bytes_read=1041090 bytes_retransmit=9 bytes_invalid=0 send_seq=68792 receive_seq=68792 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.424 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=675539 sysload=0.64 cputime=163.333 memavail=715236 print_time=2460.127 buffer_time=3.744 print_stall=0 extruder: target=200 temp=200.0 pwm=0.656
Stats 2455.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3055140 bytes_read=1041424 bytes_retransmit=9 bytes_invalid=0 send_seq=68803 receive_seq=68802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=675539 sysload=0.64 cputime=163.392 memavail=715540 print_time=2460.127 buffer_time=2.743 print_stall=0 extruder: target=200 temp=200.1 pwm=0.656
Stats 2456.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3056300 bytes_read=1041868 bytes_retransmit=9 bytes_invalid=0 send_seq=68831 receive_seq=68831 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=675759 sysload=0.64 cputime=163.454 memavail=715740 print_time=2460.631 buffer_time=2.246 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 2457.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3057602 bytes_read=1042320 bytes_retransmit=9 bytes_invalid=0 send_seq=68860 receive_seq=68859 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.340 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=675916 sysload=0.75 cputime=163.516 memavail=716072 print_time=2461.394 buffer_time=2.008 print_stall=0 extruder: target=200 temp=200.2 pwm=0.651
Stats 2458.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3059868 bytes_read=1042839 bytes_retransmit=9 bytes_invalid=0 send_seq=68904 receive_seq=68903 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.9 mcu_temp: temp=38.7 sd_pos=676332 sysload=0.75 cputime=163.582 memavail=716120 print_time=2462.558 buffer_time=2.170 print_stall=0 extruder: target=200 temp=200.3 pwm=0.651
Stats 2459.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3062228 bytes_read=1043368 bytes_retransmit=9 bytes_invalid=0 send_seq=68950 receive_seq=68949 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=676614 sysload=0.75 cputime=163.648 memavail=716120 print_time=2463.929 buffer_time=2.540 print_stall=0 extruder: target=200 temp=200.3 pwm=0.651
Stats 2460.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3063494 bytes_read=1043825 bytes_retransmit=9 bytes_invalid=0 send_seq=68979 receive_seq=68978 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=676893 sysload=0.75 cputime=163.717 memavail=715892 print_time=2464.522 buffer_time=2.131 print_stall=0 extruder: target=200 temp=200.1 pwm=0.679
Stats 2461.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3065339 bytes_read=1044294 bytes_retransmit=9 bytes_invalid=0 send_seq=69016 receive_seq=69015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.5 mcu_temp: temp=39.1 sd_pos=677272 sysload=0.75 cputime=163.781 memavail=716144 print_time=2465.575 buffer_time=2.184 print_stall=0 extruder: target=200 temp=200.1 pwm=0.679
Stats 2462.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3067877 bytes_read=1044843 bytes_retransmit=9 bytes_invalid=0 send_seq=69066 receive_seq=69065 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.450 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=677639 sysload=0.93 cputime=163.848 memavail=716156 print_time=2467.015 buffer_time=2.623 print_stall=0 extruder: target=200 temp=200.1 pwm=0.679
Stats 2463.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3068702 bytes_read=1045275 bytes_retransmit=9 bytes_invalid=0 send_seq=69087 receive_seq=69086 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=677831 sysload=0.93 cputime=163.911 memavail=716420 print_time=2467.518 buffer_time=2.124 print_stall=0 extruder: target=200 temp=200.1 pwm=0.679
Stats 2464.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3069843 bytes_read=1045689 bytes_retransmit=9 bytes_invalid=0 send_seq=69113 receive_seq=69112 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.317 raspberry_pi: temp=44.8 mcu_temp: temp=39.0 sd_pos=677933 sysload=0.93 cputime=163.983 memavail=716492 print_time=2468.617 buffer_time=2.222 print_stall=0 extruder: target=200 temp=200.1 pwm=0.651
Stats 2465.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3070667 bytes_read=1046098 bytes_retransmit=9 bytes_invalid=0 send_seq=69135 receive_seq=69134 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.409 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=677994 sysload=0.93 cputime=164.043 memavail=716268 print_time=2469.484 buffer_time=2.089 print_stall=0 extruder: target=200 temp=200.2 pwm=0.651
Stats 2466.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3071613 bytes_read=1046525 bytes_retransmit=9 bytes_invalid=0 send_seq=69158 receive_seq=69157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.354 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=678096 sysload=0.93 cputime=164.107 memavail=716268 print_time=2470.430 buffer_time=2.032 print_stall=0 extruder: target=200 temp=200.2 pwm=0.651
Stats 2467.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=3072900 bytes_read=1046974 bytes_retransmit=9 bytes_invalid=0 send_seq=69187 receive_seq=69187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996557 heater_bed: target=60 temp=60.0 pwm=0.343 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=678228 sysload=0.85 cputime=164.170 memavail=716268 print_time=2471.828 buffer_time=2.429 print_stall=0 extruder: target=200 temp=200.3 pwm=0.591
Stats 2468.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=3074755 bytes_read=1047463 bytes_retransmit=9 bytes_invalid=0 send_seq=69225 receive_seq=69225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996555 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=678380 sysload=0.85 cputime=164.242 memavail=715548 print_time=2473.721 buffer_time=3.316 print_stall=0 extruder: target=200 temp=200.3 pwm=0.591
Stats 2469.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=3074932 bytes_read=1047835 bytes_retransmit=9 bytes_invalid=0 send_seq=69237 receive_seq=69237 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996545 heater_bed: target=60 temp=60.0 pwm=0.344 raspberry_pi: temp=44.4 mcu_temp: temp=39.1 sd_pos=678380 sysload=0.85 cputime=164.303 memavail=715336 print_time=2473.721 buffer_time=2.316 print_stall=0 extruder: target=200 temp=200.3 pwm=0.591
Stats 2470.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=3077254 bytes_read=1048349 bytes_retransmit=9 bytes_invalid=0 send_seq=69283 receive_seq=69283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996542 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=679252 sysload=0.85 cputime=164.372 memavail=715340 print_time=2474.894 buffer_time=2.488 print_stall=0 extruder: target=200 temp=200.3 pwm=0.591
Stats 2471.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=3079303 bytes_read=1048853 bytes_retransmit=9 bytes_invalid=0 send_seq=69324 receive_seq=69324 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996543 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=679957 sysload=0.85 cputime=164.444 memavail=715876 print_time=2475.799 buffer_time=2.392 print_stall=0 extruder: target=200 temp=200.2 pwm=0.657
Stats 2472.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3081085 bytes_read=1049360 bytes_retransmit=9 bytes_invalid=0 send_seq=69360 receive_seq=69360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996551 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=680568 sysload=0.79 cputime=164.512 memavail=715880 print_time=2476.641 buffer_time=2.233 print_stall=0 extruder: target=200 temp=200.1 pwm=0.657
Stats 2473.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3083252 bytes_read=1049864 bytes_retransmit=9 bytes_invalid=0 send_seq=69405 receive_seq=69404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996554 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=681270 sysload=0.79 cputime=164.588 memavail=716060 print_time=2477.618 buffer_time=2.210 print_stall=0 extruder: target=200 temp=200.0 pwm=0.710
Stats 2474.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3084955 bytes_read=1050357 bytes_retransmit=9 bytes_invalid=0 send_seq=69441 receive_seq=69440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996552 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=681742 sysload=0.79 cputime=164.655 memavail=715828 print_time=2478.475 buffer_time=2.064 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 2475.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3087164 bytes_read=1050875 bytes_retransmit=9 bytes_invalid=0 send_seq=69484 receive_seq=69484 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=682230 sysload=0.79 cputime=164.722 memavail=716232 print_time=2480.054 buffer_time=2.643 print_stall=0 extruder: target=200 temp=199.8 pwm=0.710
Stats 2476.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3087733 bytes_read=1051244 bytes_retransmit=9 bytes_invalid=0 send_seq=69501 receive_seq=69501 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996557 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.4 mcu_temp: temp=38.8 sd_pos=682398 sysload=0.79 cputime=164.783 memavail=717108 print_time=2480.499 buffer_time=2.087 print_stall=0 extruder: target=200 temp=199.7 pwm=0.710
Stats 2477.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3089451 bytes_read=1051744 bytes_retransmit=9 bytes_invalid=0 send_seq=69536 receive_seq=69536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.3 mcu_temp: temp=38.9 sd_pos=682754 sysload=0.72 cputime=164.854 memavail=716856 print_time=2482.136 buffer_time=2.719 print_stall=0 extruder: target=200 temp=199.7 pwm=0.710
Stats 2478.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3090010 bytes_read=1052116 bytes_retransmit=9 bytes_invalid=0 send_seq=69553 receive_seq=69553 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996559 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=682814 sysload=0.72 cputime=164.916 memavail=716836 print_time=2482.420 buffer_time=2.002 print_stall=0 extruder: target=200 temp=199.7 pwm=0.698
Stats 2479.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3090594 bytes_read=1052486 bytes_retransmit=9 bytes_invalid=0 send_seq=69571 receive_seq=69571 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996557 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=44.3 mcu_temp: temp=39.2 sd_pos=682878 sysload=0.72 cputime=164.976 memavail=716896 print_time=2484.069 buffer_time=2.650 print_stall=0 extruder: target=200 temp=199.7 pwm=0.698
Stats 2480.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3091811 bytes_read=1052944 bytes_retransmit=9 bytes_invalid=0 send_seq=69600 receive_seq=69600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996557 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=44.8 mcu_temp: temp=39.0 sd_pos=683008 sysload=0.72 cputime=165.040 memavail=717152 print_time=2486.151 buffer_time=3.732 print_stall=0 extruder: target=200 temp=199.7 pwm=0.698
Stats 2481.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3091957 bytes_read=1053297 bytes_retransmit=9 bytes_invalid=0 send_seq=69611 receive_seq=69611 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=44.5 mcu_temp: temp=38.8 sd_pos=683008 sysload=0.72 cputime=165.095 memavail=716900 print_time=2486.151 buffer_time=2.731 print_stall=0 extruder: target=200 temp=199.8 pwm=0.698
Stats 2482.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3093125 bytes_read=1053736 bytes_retransmit=9 bytes_invalid=0 send_seq=69639 receive_seq=69639 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=44.6 mcu_temp: temp=38.9 sd_pos=683262 sysload=0.66 cputime=165.160 memavail=716900 print_time=2486.668 buffer_time=2.247 print_stall=0 extruder: target=200 temp=199.9 pwm=0.670
Stats 2483.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3094550 bytes_read=1054214 bytes_retransmit=9 bytes_invalid=0 send_seq=69672 receive_seq=69672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=683456 sysload=0.66 cputime=165.224 memavail=716396 print_time=2487.474 buffer_time=2.051 print_stall=0 extruder: target=200 temp=200.0 pwm=0.619
Stats 2484.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3096723 bytes_read=1054722 bytes_retransmit=9 bytes_invalid=0 send_seq=69714 receive_seq=69714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=683837 sysload=0.66 cputime=165.291 memavail=716656 print_time=2488.597 buffer_time=2.173 print_stall=0 extruder: target=200 temp=200.1 pwm=0.619
Stats 2485.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3099094 bytes_read=1055241 bytes_retransmit=9 bytes_invalid=0 send_seq=69761 receive_seq=69761 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=45.1 mcu_temp: temp=38.8 sd_pos=684122 sysload=0.66 cputime=165.358 memavail=716908 print_time=2489.961 buffer_time=2.536 print_stall=0 extruder: target=200 temp=200.1 pwm=0.619
Stats 2486.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3100419 bytes_read=1055704 bytes_retransmit=9 bytes_invalid=0 send_seq=69792 receive_seq=69791 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=684401 sysload=0.66 cputime=165.422 memavail=717360 print_time=2490.561 buffer_time=2.134 print_stall=0 extruder: target=200 temp=200.1 pwm=0.619
Stats 2487.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=3102328 bytes_read=1056192 bytes_retransmit=9 bytes_invalid=0 send_seq=69830 receive_seq=69829 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=684776 sysload=0.61 cputime=165.489 memavail=717164 print_time=2491.611 buffer_time=2.184 print_stall=0 extruder: target=200 temp=200.0 pwm=0.683
Stats 2488.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3104906 bytes_read=1056736 bytes_retransmit=9 bytes_invalid=0 send_seq=69879 receive_seq=69878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=685110 sysload=0.61 cputime=165.556 memavail=717444 print_time=2493.050 buffer_time=2.621 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2489.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3105888 bytes_read=1057159 bytes_retransmit=9 bytes_invalid=0 send_seq=69902 receive_seq=69900 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=685302 sysload=0.61 cputime=165.621 memavail=717452 print_time=2493.555 buffer_time=2.123 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2490.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3106997 bytes_read=1057597 bytes_retransmit=9 bytes_invalid=0 send_seq=69928 receive_seq=69928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.324 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=685403 sysload=0.61 cputime=165.684 memavail=717704 print_time=2494.654 buffer_time=2.221 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2491.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3107789 bytes_read=1057986 bytes_retransmit=9 bytes_invalid=0 send_seq=69949 receive_seq=69949 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=685465 sysload=0.61 cputime=165.743 memavail=718460 print_time=2495.521 buffer_time=2.088 print_stall=0 extruder: target=200 temp=199.8 pwm=0.711
Stats 2492.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3108752 bytes_read=1058414 bytes_retransmit=9 bytes_invalid=0 send_seq=69973 receive_seq=69972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=685567 sysload=0.56 cputime=165.806 memavail=718460 print_time=2496.467 buffer_time=2.033 print_stall=0 extruder: target=200 temp=199.8 pwm=0.711
Stats 2493.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3109994 bytes_read=1058862 bytes_retransmit=9 bytes_invalid=0 send_seq=70000 receive_seq=69999 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.364 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=685698 sysload=0.56 cputime=165.868 memavail=718616 print_time=2497.865 buffer_time=2.430 print_stall=0 extruder: target=200 temp=199.8 pwm=0.711
Stats 2494.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3111854 bytes_read=1059331 bytes_retransmit=9 bytes_invalid=0 send_seq=70037 receive_seq=70036 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996576 heater_bed: target=60 temp=60.0 pwm=0.464 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=685850 sysload=0.56 cputime=165.934 memavail=718640 print_time=2499.758 buffer_time=3.320 print_stall=0 extruder: target=200 temp=199.8 pwm=0.711
Stats 2495.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3112031 bytes_read=1059709 bytes_retransmit=9 bytes_invalid=0 send_seq=70049 receive_seq=70049 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.347 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=685850 sysload=0.56 cputime=165.991 memavail=718388 print_time=2499.758 buffer_time=2.318 print_stall=0 extruder: target=200 temp=199.8 pwm=0.678
Stats 2496.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3114392 bytes_read=1060242 bytes_retransmit=9 bytes_invalid=0 send_seq=70096 receive_seq=70096 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=686724 sysload=0.56 cputime=166.060 memavail=718588 print_time=2500.931 buffer_time=2.491 print_stall=0 extruder: target=200 temp=199.8 pwm=0.678
Stats 2497.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000057 bytes_write=3116418 bytes_read=1060741 bytes_retransmit=9 bytes_invalid=0 send_seq=70136 receive_seq=70136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=687428 sysload=0.52 cputime=166.127 memavail=718892 print_time=2501.836 buffer_time=2.394 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 2498.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3118202 bytes_read=1061224 bytes_retransmit=9 bytes_invalid=0 send_seq=70171 receive_seq=70170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.401 raspberry_pi: temp=44.7 mcu_temp: temp=39.1 sd_pos=688037 sysload=0.52 cputime=166.193 memavail=717912 print_time=2502.678 buffer_time=2.235 print_stall=0 extruder: target=200 temp=199.9 pwm=0.678
Stats 2499.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3120335 bytes_read=1061742 bytes_retransmit=9 bytes_invalid=0 send_seq=70215 receive_seq=70214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996639 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=688740 sysload=0.52 cputime=166.262 memavail=717696 print_time=2503.655 buffer_time=2.211 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 2500.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3122014 bytes_read=1062217 bytes_retransmit=9 bytes_invalid=0 send_seq=70251 receive_seq=70250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=689211 sysload=0.52 cputime=166.327 memavail=717444 print_time=2504.511 buffer_time=2.066 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 2501.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3124248 bytes_read=1062755 bytes_retransmit=9 bytes_invalid=0 send_seq=70295 receive_seq=70295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=43.9 mcu_temp: temp=39.1 sd_pos=689700 sysload=0.52 cputime=166.395 memavail=717444 print_time=2506.091 buffer_time=2.645 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 2502.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3124825 bytes_read=1063133 bytes_retransmit=9 bytes_invalid=0 send_seq=70312 receive_seq=70311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996632 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=43.6 mcu_temp: temp=38.8 sd_pos=689867 sysload=0.47 cputime=166.454 memavail=717444 print_time=2506.535 buffer_time=2.088 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 2503.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3126558 bytes_read=1063605 bytes_retransmit=9 bytes_invalid=0 send_seq=70348 receive_seq=70347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=690223 sysload=0.47 cputime=166.520 memavail=717196 print_time=2508.173 buffer_time=2.724 print_stall=0 extruder: target=200 temp=199.9 pwm=0.698
Stats 2504.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3127130 bytes_read=1064012 bytes_retransmit=9 bytes_invalid=0 send_seq=70365 receive_seq=70365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996636 heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=43.6 mcu_temp: temp=39.2 sd_pos=690283 sysload=0.47 cputime=166.581 memavail=716952 print_time=2508.457 buffer_time=2.006 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2505.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3127684 bytes_read=1064381 bytes_retransmit=9 bytes_invalid=0 send_seq=70382 receive_seq=70382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=690346 sysload=0.47 cputime=166.641 memavail=716464 print_time=2510.106 buffer_time=2.654 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2506.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3128970 bytes_read=1064805 bytes_retransmit=9 bytes_invalid=0 send_seq=70411 receive_seq=70410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.349 raspberry_pi: temp=43.9 mcu_temp: temp=38.9 sd_pos=690477 sysload=0.47 cputime=166.703 memavail=716212 print_time=2512.252 buffer_time=3.800 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2507.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3129138 bytes_read=1065187 bytes_retransmit=9 bytes_invalid=0 send_seq=70422 receive_seq=70421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996628 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=690477 sysload=0.44 cputime=166.759 memavail=716212 print_time=2512.252 buffer_time=2.798 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2508.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3130108 bytes_read=1065606 bytes_retransmit=9 bytes_invalid=0 send_seq=70446 receive_seq=70445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=690807 sysload=0.44 cputime=166.821 memavail=717000 print_time=2512.997 buffer_time=2.543 print_stall=0 extruder: target=200 temp=200.0 pwm=0.690
Stats 2509.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3130655 bytes_read=1065970 bytes_retransmit=9 bytes_invalid=0 send_seq=70462 receive_seq=70461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=43.8 mcu_temp: temp=39.2 sd_pos=691078 sysload=0.44 cputime=166.882 memavail=716236 print_time=2513.629 buffer_time=2.173 print_stall=0 extruder: target=200 temp=200.0 pwm=0.690
Stats 2510.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3131775 bytes_read=1066427 bytes_retransmit=9 bytes_invalid=0 send_seq=70488 receive_seq=70487 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996637 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=43.8 mcu_temp: temp=38.9 sd_pos=691852 sysload=0.44 cputime=166.953 memavail=716032 print_time=2514.833 buffer_time=2.375 print_stall=0 extruder: target=200 temp=200.0 pwm=0.690
Stats 2511.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3133119 bytes_read=1066856 bytes_retransmit=9 bytes_invalid=0 send_seq=70517 receive_seq=70516 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.414 raspberry_pi: temp=43.6 mcu_temp: temp=39.2 sd_pos=692095 sysload=0.44 cputime=167.016 memavail=716564 print_time=2515.534 buffer_time=2.075 print_stall=0 extruder: target=200 temp=200.0 pwm=0.690
Stats 2512.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3133729 bytes_read=1067265 bytes_retransmit=9 bytes_invalid=0 send_seq=70535 receive_seq=70535 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.326 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=692165 sysload=0.48 cputime=167.079 memavail=716764 print_time=2516.481 buffer_time=2.019 print_stall=0 extruder: target=200 temp=200.0 pwm=0.668
Stats 2513.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3135592 bytes_read=1067762 bytes_retransmit=9 bytes_invalid=0 send_seq=70573 receive_seq=70572 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996612 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=692531 sysload=0.48 cputime=167.144 memavail=717016 print_time=2519.074 buffer_time=3.611 print_stall=0 extruder: target=200 temp=200.0 pwm=0.668
Stats 2514.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3135747 bytes_read=1068106 bytes_retransmit=9 bytes_invalid=0 send_seq=70584 receive_seq=70584 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=692531 sysload=0.48 cputime=167.202 memavail=717328 print_time=2519.074 buffer_time=2.610 print_stall=0 extruder: target=200 temp=200.0 pwm=0.668
Stats 2515.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3137255 bytes_read=1068560 bytes_retransmit=9 bytes_invalid=0 send_seq=70616 receive_seq=70615 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.5 mcu_temp: temp=39.1 sd_pos=692802 sysload=0.48 cputime=167.266 memavail=717584 print_time=2519.889 buffer_time=2.424 print_stall=0 extruder: target=200 temp=199.9 pwm=0.668
Stats 2516.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3138453 bytes_read=1069002 bytes_retransmit=9 bytes_invalid=0 send_seq=70642 receive_seq=70641 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996617 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=693005 sysload=0.48 cputime=167.330 memavail=718112 print_time=2520.753 buffer_time=2.286 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 2517.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3140050 bytes_read=1069471 bytes_retransmit=9 bytes_invalid=0 send_seq=70675 receive_seq=70675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=693270 sysload=0.44 cputime=167.394 memavail=717880 print_time=2521.904 buffer_time=2.435 print_stall=0 extruder: target=200 temp=199.9 pwm=0.680
Stats 2518.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3141761 bytes_read=1069940 bytes_retransmit=9 bytes_invalid=0 send_seq=70710 receive_seq=70709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.9 mcu_temp: temp=39.2 sd_pos=693545 sysload=0.44 cputime=167.464 memavail=717880 print_time=2522.959 buffer_time=2.489 print_stall=0 extruder: target=200 temp=199.9 pwm=0.680
Stats 2519.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3142768 bytes_read=1070382 bytes_retransmit=9 bytes_invalid=0 send_seq=70735 receive_seq=70735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=693678 sysload=0.44 cputime=167.535 memavail=717896 print_time=2523.515 buffer_time=2.044 print_stall=0 extruder: target=200 temp=199.8 pwm=0.741
Stats 2520.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3144440 bytes_read=1070831 bytes_retransmit=9 bytes_invalid=0 send_seq=70769 receive_seq=70768 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.4 mcu_temp: temp=39.1 sd_pos=693943 sysload=0.44 cputime=167.599 memavail=718400 print_time=2524.800 buffer_time=2.327 print_stall=0 extruder: target=200 temp=199.8 pwm=0.741
Stats 2521.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3145312 bytes_read=1071235 bytes_retransmit=9 bytes_invalid=0 send_seq=70790 receive_seq=70789 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=694077 sysload=0.44 cputime=167.662 memavail=718652 print_time=2525.580 buffer_time=2.106 print_stall=0 extruder: target=200 temp=199.7 pwm=0.741
Stats 2522.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3146476 bytes_read=1071677 bytes_retransmit=9 bytes_invalid=0 send_seq=70816 receive_seq=70815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.1 mcu_temp: temp=39.2 sd_pos=694278 sysload=0.41 cputime=167.726 memavail=718852 print_time=2526.931 buffer_time=2.454 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2523.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3147348 bytes_read=1072081 bytes_retransmit=9 bytes_invalid=0 send_seq=70837 receive_seq=70836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=694413 sysload=0.41 cputime=167.788 memavail=718164 print_time=2527.921 buffer_time=2.443 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2524.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3148231 bytes_read=1072490 bytes_retransmit=9 bytes_invalid=0 send_seq=70859 receive_seq=70858 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=694549 sysload=0.41 cputime=167.851 memavail=717672 print_time=2528.836 buffer_time=2.357 print_stall=0 extruder: target=200 temp=200.1 pwm=0.636
Stats 2525.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3149086 bytes_read=1072912 bytes_retransmit=9 bytes_invalid=0 send_seq=70880 receive_seq=70880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.375 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=694684 sysload=0.41 cputime=167.913 memavail=717672 print_time=2529.652 buffer_time=2.171 print_stall=0 extruder: target=200 temp=200.2 pwm=0.636
Stats 2526.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3150816 bytes_read=1073381 bytes_retransmit=9 bytes_invalid=0 send_seq=70918 receive_seq=70917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.309 raspberry_pi: temp=43.9 mcu_temp: temp=39.1 sd_pos=694956 sysload=0.41 cputime=167.979 memavail=717672 print_time=2530.983 buffer_time=2.501 print_stall=0 extruder: target=200 temp=200.3 pwm=0.581
Stats 2527.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3151679 bytes_read=1073790 bytes_retransmit=9 bytes_invalid=0 send_seq=70940 receive_seq=70939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.435 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=695090 sysload=0.37 cputime=168.039 memavail=717420 print_time=2531.498 buffer_time=2.015 print_stall=0 extruder: target=200 temp=200.4 pwm=0.581
Stats 2528.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3154468 bytes_read=1074369 bytes_retransmit=9 bytes_invalid=0 send_seq=70991 receive_seq=70990 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=695558 sysload=0.37 cputime=168.105 memavail=717196 print_time=2532.624 buffer_time=2.139 print_stall=0 extruder: target=200 temp=200.4 pwm=0.581
Stats 2529.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3157310 bytes_read=1074913 bytes_retransmit=9 bytes_invalid=0 send_seq=71045 receive_seq=71044 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.7 mcu_temp: temp=39.2 sd_pos=696085 sysload=0.37 cputime=168.176 memavail=716708 print_time=2533.642 buffer_time=2.156 print_stall=0 extruder: target=200 temp=200.4 pwm=0.581
Stats 2530.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3160151 bytes_read=1075477 bytes_retransmit=9 bytes_invalid=0 send_seq=71098 receive_seq=71098 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=696612 sysload=0.37 cputime=168.245 memavail=716708 print_time=2534.662 buffer_time=2.175 print_stall=0 extruder: target=200 temp=200.4 pwm=0.647
Stats 2531.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3162313 bytes_read=1076004 bytes_retransmit=9 bytes_invalid=0 send_seq=71141 receive_seq=71141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=696980 sysload=0.37 cputime=168.311 memavail=716712 print_time=2535.559 buffer_time=2.070 print_stall=0 extruder: target=200 temp=200.2 pwm=0.647
Stats 2532.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3164215 bytes_read=1076473 bytes_retransmit=9 bytes_invalid=0 send_seq=71179 receive_seq=71178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=697276 sysload=0.34 cputime=168.380 memavail=716712 print_time=2536.887 buffer_time=2.397 print_stall=0 extruder: target=200 temp=200.1 pwm=0.710
Stats 2533.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3165774 bytes_read=1076958 bytes_retransmit=9 bytes_invalid=0 send_seq=71212 receive_seq=71212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=43.9 mcu_temp: temp=39.1 sd_pos=697547 sysload=0.34 cputime=168.445 memavail=716460 print_time=2537.829 buffer_time=2.338 print_stall=0 extruder: target=200 temp=200.0 pwm=0.710
Stats 2534.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3167517 bytes_read=1077445 bytes_retransmit=9 bytes_invalid=0 send_seq=71248 receive_seq=71247 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=697815 sysload=0.34 cputime=168.514 memavail=716220 print_time=2538.897 buffer_time=2.404 print_stall=0 extruder: target=200 temp=199.9 pwm=0.710
Stats 2535.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3168431 bytes_read=1077844 bytes_retransmit=9 bytes_invalid=0 send_seq=71271 receive_seq=71270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=697950 sysload=0.34 cputime=168.580 memavail=716228 print_time=2539.541 buffer_time=2.047 print_stall=0 extruder: target=200 temp=199.8 pwm=0.763
Stats 2536.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3169615 bytes_read=1078268 bytes_retransmit=9 bytes_invalid=0 send_seq=71296 receive_seq=71295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=698153 sysload=0.34 cputime=168.649 memavail=716228 print_time=2540.693 buffer_time=2.196 print_stall=0 extruder: target=200 temp=199.8 pwm=0.763
Stats 2537.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3170514 bytes_read=1078715 bytes_retransmit=9 bytes_invalid=0 send_seq=71319 receive_seq=71319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=698289 sysload=0.32 cputime=168.714 memavail=716228 print_time=2541.581 buffer_time=2.083 print_stall=0 extruder: target=200 temp=199.8 pwm=0.683
Stats 2538.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3171374 bytes_read=1079104 bytes_retransmit=9 bytes_invalid=0 send_seq=71340 receive_seq=71340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.448 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=698424 sysload=0.32 cputime=168.779 memavail=716228 print_time=2542.540 buffer_time=2.042 print_stall=0 extruder: target=200 temp=199.8 pwm=0.683
Stats 2539.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3172618 bytes_read=1079543 bytes_retransmit=9 bytes_invalid=0 send_seq=71368 receive_seq=71368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.5 mcu_temp: temp=39.1 sd_pos=698628 sysload=0.32 cputime=168.851 memavail=716508 print_time=2543.857 buffer_time=2.356 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2540.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3173487 bytes_read=1079965 bytes_retransmit=9 bytes_invalid=0 send_seq=71390 receive_seq=71390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.1 mcu_temp: temp=39.2 sd_pos=698762 sysload=0.32 cputime=168.922 memavail=716520 print_time=2544.605 buffer_time=2.102 print_stall=0 extruder: target=200 temp=200.1 pwm=0.624
Stats 2541.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3175077 bytes_read=1080414 bytes_retransmit=9 bytes_invalid=0 send_seq=71423 receive_seq=71423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.282 raspberry_pi: temp=44.4 mcu_temp: temp=39.1 sd_pos=699033 sysload=0.32 cputime=168.993 memavail=716520 print_time=2545.797 buffer_time=2.294 print_stall=0 extruder: target=200 temp=200.1 pwm=0.624
Stats 2542.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3178165 bytes_read=1081018 bytes_retransmit=9 bytes_invalid=0 send_seq=71482 receive_seq=71481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=44.7 mcu_temp: temp=39.1 sd_pos=699572 sysload=0.29 cputime=169.070 memavail=716520 print_time=2547.037 buffer_time=2.532 print_stall=0 extruder: target=200 temp=200.2 pwm=0.624
Stats 2543.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3180182 bytes_read=1081540 bytes_retransmit=9 bytes_invalid=0 send_seq=71523 receive_seq=71523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=44.5 mcu_temp: temp=39.1 sd_pos=699979 sysload=0.29 cputime=169.145 memavail=716520 print_time=2547.687 buffer_time=2.181 print_stall=0 extruder: target=200 temp=200.3 pwm=0.624
Stats 2544.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3184037 bytes_read=1082179 bytes_retransmit=9 bytes_invalid=0 send_seq=71594 receive_seq=71594 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=44.8 mcu_temp: temp=39.2 sd_pos=700791 sysload=0.29 cputime=169.222 memavail=716268 print_time=2548.993 buffer_time=2.485 print_stall=0 extruder: target=200 temp=200.3 pwm=0.613
Stats 2545.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3185929 bytes_read=1082673 bytes_retransmit=9 bytes_invalid=0 send_seq=71633 receive_seq=71633 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.438 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=701007 sysload=0.29 cputime=169.301 memavail=716024 print_time=2549.965 buffer_time=2.457 print_stall=0 extruder: target=200 temp=200.2 pwm=0.613
Stats 2546.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3186984 bytes_read=1083105 bytes_retransmit=9 bytes_invalid=0 send_seq=71657 receive_seq=71657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.6 mcu_temp: temp=39.1 sd_pos=701140 sysload=0.29 cputime=169.374 memavail=716024 print_time=2550.658 buffer_time=2.149 print_stall=0 extruder: target=200 temp=200.3 pwm=0.613
Stats 2547.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3189588 bytes_read=1083639 bytes_retransmit=9 bytes_invalid=0 send_seq=71707 receive_seq=71707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.418 raspberry_pi: temp=44.9 mcu_temp: temp=38.9 sd_pos=701629 sysload=0.27 cputime=169.451 memavail=715788 print_time=2551.868 buffer_time=2.358 print_stall=0 extruder: target=200 temp=200.2 pwm=0.613
Stats 2548.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3190825 bytes_read=1084107 bytes_retransmit=9 bytes_invalid=0 send_seq=71735 receive_seq=71735 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=701859 sysload=0.27 cputime=169.531 memavail=715788 print_time=2552.592 buffer_time=2.079 print_stall=0 extruder: target=200 temp=200.3 pwm=0.613
Stats 2549.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3192302 bytes_read=1084560 bytes_retransmit=9 bytes_invalid=0 send_seq=71766 receive_seq=71766 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.297 raspberry_pi: temp=45.2 mcu_temp: temp=39.2 sd_pos=701984 sysload=0.27 cputime=169.606 memavail=715536 print_time=2554.347 buffer_time=2.834 print_stall=0 extruder: target=200 temp=200.2 pwm=0.634
Stats 2550.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3192923 bytes_read=1084929 bytes_retransmit=9 bytes_invalid=0 send_seq=71783 receive_seq=71783 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=45.0 mcu_temp: temp=39.0 sd_pos=702054 sysload=0.27 cputime=169.679 memavail=715796 print_time=2554.842 buffer_time=2.327 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 2551.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3194110 bytes_read=1085382 bytes_retransmit=9 bytes_invalid=0 send_seq=71811 receive_seq=71811 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.370 raspberry_pi: temp=45.3 mcu_temp: temp=39.0 sd_pos=702147 sysload=0.27 cputime=169.754 memavail=715796 print_time=2556.184 buffer_time=2.668 print_stall=0 extruder: target=200 temp=200.1 pwm=0.634
Stats 2552.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=3194745 bytes_read=1085775 bytes_retransmit=9 bytes_invalid=0 send_seq=71830 receive_seq=71830 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=60 temp=60.0 pwm=0.302 raspberry_pi: temp=44.8 mcu_temp: temp=39.0 sd_pos=702217 sysload=0.25 cputime=169.826 memavail=715796 print_time=2556.691 buffer_time=2.173 print_stall=0 extruder: target=200 temp=200.0 pwm=0.691
Stats 2553.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=3196552 bytes_read=1086259 bytes_retransmit=9 bytes_invalid=0 send_seq=71867 receive_seq=71867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.386 raspberry_pi: temp=44.9 mcu_temp: temp=39.2 sd_pos=702369 sysload=0.25 cputime=169.899 memavail=715796 print_time=2558.583 buffer_time=3.064 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 2554.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=3196776 bytes_read=1086619 bytes_retransmit=9 bytes_invalid=0 send_seq=71878 receive_seq=71878 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=45.3 mcu_temp: temp=39.2 sd_pos=702369 sysload=0.25 cputime=169.968 memavail=715800 print_time=2558.583 buffer_time=2.062 print_stall=0 extruder: target=200 temp=199.9 pwm=0.691
Stats 2555.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=3199060 bytes_read=1087132 bytes_retransmit=9 bytes_invalid=0 send_seq=71923 receive_seq=71923 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996621 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=44.9 mcu_temp: temp=39.0 sd_pos=703244 sysload=0.25 cputime=170.050 memavail=715808 print_time=2559.757 buffer_time=2.235 print_stall=0 extruder: target=200 temp=199.8 pwm=0.691
Stats 2556.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=3201157 bytes_read=1087625 bytes_retransmit=9 bytes_invalid=0 send_seq=71965 receive_seq=71965 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.329 raspberry_pi: temp=45.3 mcu_temp: temp=39.2 sd_pos=703949 sysload=0.25 cputime=170.129 memavail=715872 print_time=2560.661 buffer_time=2.138 print_stall=0 extruder: target=200 temp=199.8 pwm=0.685
Stats 2557.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000016 mcu_task_stddev=0.000059 bytes_write=3203265 bytes_read=1088153 bytes_retransmit=9 bytes_invalid=0 send_seq=72008 receive_seq=72008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.416 raspberry_pi: temp=44.8 mcu_temp: temp=39.2 sd_pos=704759 sysload=0.23 cputime=170.215 memavail=716124 print_time=2561.636 buffer_time=2.111 print_stall=0 extruder: target=200 temp=199.8 pwm=0.685
Stats 2558.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3205960 bytes_read=1088721 bytes_retransmit=9 bytes_invalid=0 send_seq=72060 receive_seq=72059 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=60 temp=60.0 pwm=0.311 raspberry_pi: temp=44.7 mcu_temp: temp=39.2 sd_pos=705431 sysload=0.23 cputime=170.295 memavail=716376 print_time=2562.980 buffer_time=2.454 print_stall=0 extruder: target=200 temp=199.8 pwm=0.685
Stats 2559.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3208080 bytes_read=1089236 bytes_retransmit=9 bytes_invalid=0 send_seq=72103 receive_seq=72103 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.5 mcu_temp: temp=39.1 sd_pos=706054 sysload=0.23 cputime=170.373 memavail=716376 print_time=2564.092 buffer_time=2.563 print_stall=0 extruder: target=200 temp=199.8 pwm=0.685
Stats 2560.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3209010 bytes_read=1089664 bytes_retransmit=9 bytes_invalid=0 send_seq=72126 receive_seq=72126 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.434 raspberry_pi: temp=44.6 mcu_temp: temp=39.1 sd_pos=706222 sysload=0.23 cputime=170.446 memavail=716124 print_time=2564.917 buffer_time=2.384 print_stall=0 extruder: target=200 temp=199.8 pwm=0.712
Stats 2561.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3210083 bytes_read=1090087 bytes_retransmit=9 bytes_invalid=0 send_seq=72151 receive_seq=72151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=45.3 mcu_temp: temp=39.0 sd_pos=706559 sysload=0.23 cputime=170.521 memavail=716132 print_time=2566.129 buffer_time=2.595 print_stall=0 extruder: target=200 temp=199.8 pwm=0.712
Stats 2562.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3211350 bytes_read=1090521 bytes_retransmit=9 bytes_invalid=0 send_seq=72181 receive_seq=72181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.457 raspberry_pi: temp=44.5 mcu_temp: temp=38.9 sd_pos=706746 sysload=0.37 cputime=170.593 memavail=716132 print_time=2566.999 buffer_time=2.462 print_stall=0 extruder: target=200 temp=199.8 pwm=0.712
Stats 2563.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3212136 bytes_read=1090954 bytes_retransmit=9 bytes_invalid=0 send_seq=72202 receive_seq=72202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=706838 sysload=0.37 cputime=170.665 memavail=716132 print_time=2568.112 buffer_time=2.571 print_stall=0 extruder: target=200 temp=199.9 pwm=0.712
Stats 2564.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3212500 bytes_read=1091322 bytes_retransmit=9 bytes_invalid=0 send_seq=72216 receive_seq=72216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.406 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=706869 sysload=0.37 cputime=170.735 memavail=716132 print_time=2568.932 buffer_time=2.386 print_stall=0 extruder: target=200 temp=199.9 pwm=0.653
Stats 2565.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3213798 bytes_read=1091756 bytes_retransmit=9 bytes_invalid=0 send_seq=72246 receive_seq=72246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=707000 sysload=0.37 cputime=170.807 memavail=716712 print_time=2571.078 buffer_time=3.530 print_stall=0 extruder: target=200 temp=200.0 pwm=0.653
Stats 2566.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3213939 bytes_read=1092133 bytes_retransmit=9 bytes_invalid=0 send_seq=72256 receive_seq=72256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=707000 sysload=0.37 cputime=170.875 memavail=716460 print_time=2571.078 buffer_time=2.525 print_stall=0 extruder: target=200 temp=200.1 pwm=0.653
Stats 2567.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3214912 bytes_read=1092532 bytes_retransmit=9 bytes_invalid=0 send_seq=72279 receive_seq=72279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=707330 sysload=0.42 cputime=170.951 memavail=716872 print_time=2571.823 buffer_time=2.268 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 2568.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3215839 bytes_read=1092956 bytes_retransmit=9 bytes_invalid=0 send_seq=72302 receive_seq=72301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=707812 sysload=0.42 cputime=171.035 memavail=717928 print_time=2572.594 buffer_time=2.031 print_stall=0 extruder: target=200 temp=200.2 pwm=0.653
Stats 2569.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3216774 bytes_read=1093383 bytes_retransmit=9 bytes_invalid=0 send_seq=72324 receive_seq=72324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=708384 sysload=0.42 cputime=171.113 memavail=717676 print_time=2573.659 buffer_time=2.096 print_stall=0 extruder: target=200 temp=200.3 pwm=0.629
Stats 2570.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3218360 bytes_read=1093837 bytes_retransmit=9 bytes_invalid=0 send_seq=72358 receive_seq=72358 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.0 mcu_temp: temp=38.9 sd_pos=708665 sysload=0.42 cputime=171.192 memavail=718188 print_time=2574.571 buffer_time=2.008 print_stall=0 extruder: target=200 temp=200.3 pwm=0.629
Stats 2571.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3218893 bytes_read=1094211 bytes_retransmit=9 bytes_invalid=0 send_seq=72373 receive_seq=72373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.1 mcu_temp: temp=39.2 sd_pos=708729 sysload=0.42 cputime=171.263 memavail=718224 print_time=2576.033 buffer_time=2.467 print_stall=0 extruder: target=200 temp=200.2 pwm=0.629
Stats 2572.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3219624 bytes_read=1094618 bytes_retransmit=9 bytes_invalid=0 send_seq=72392 receive_seq=72392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.6 mcu_temp: temp=39.1 sd_pos=708800 sysload=0.47 cputime=171.335 memavail=718740 print_time=2577.706 buffer_time=3.137 print_stall=0 extruder: target=200 temp=200.2 pwm=0.629
Stats 2573.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3219822 bytes_read=1094987 bytes_retransmit=9 bytes_invalid=0 send_seq=72406 receive_seq=72406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=708800 sysload=0.47 cputime=171.403 memavail=718740 print_time=2577.706 buffer_time=2.133 print_stall=0 extruder: target=200 temp=200.1 pwm=0.695
Stats 2574.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3222279 bytes_read=1095531 bytes_retransmit=9 bytes_invalid=0 send_seq=72455 receive_seq=72455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.471 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=709204 sysload=0.47 cputime=171.482 memavail=718992 print_time=2578.989 buffer_time=2.412 print_stall=0 extruder: target=200 temp=200.1 pwm=0.695
Stats 2575.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3223817 bytes_read=1096013 bytes_retransmit=9 bytes_invalid=0 send_seq=72489 receive_seq=72489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.312 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=709470 sysload=0.47 cputime=171.559 memavail=718496 print_time=2579.911 buffer_time=2.330 print_stall=0 extruder: target=200 temp=200.1 pwm=0.695
Stats 2576.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3225013 bytes_read=1096427 bytes_retransmit=9 bytes_invalid=0 send_seq=72515 receive_seq=72515 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=709669 sysload=0.47 cputime=171.634 memavail=718404 print_time=2580.854 buffer_time=2.271 print_stall=0 extruder: target=200 temp=200.0 pwm=0.695
Stats 2577.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3226515 bytes_read=1096886 bytes_retransmit=9 bytes_invalid=0 send_seq=72547 receive_seq=72547 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.328 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=709940 sysload=0.59 cputime=171.707 memavail=718296 print_time=2581.614 buffer_time=2.028 print_stall=0 extruder: target=200 temp=200.0 pwm=0.695
Stats 2578.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3229383 bytes_read=1097493 bytes_retransmit=9 bytes_invalid=0 send_seq=72603 receive_seq=72603 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.415 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=710482 sysload=0.59 cputime=171.786 memavail=718296 print_time=2582.636 buffer_time=2.047 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 2579.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3232193 bytes_read=1098045 bytes_retransmit=9 bytes_invalid=0 send_seq=72657 receive_seq=72657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=711024 sysload=0.59 cputime=171.868 memavail=718548 print_time=2583.657 buffer_time=2.066 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 2580.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3234901 bytes_read=1098593 bytes_retransmit=9 bytes_invalid=0 send_seq=72709 receive_seq=72709 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996559 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.3 mcu_temp: temp=39.1 sd_pos=711495 sysload=0.59 cputime=171.949 memavail=718812 print_time=2584.705 buffer_time=2.112 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 2581.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3236496 bytes_read=1099059 bytes_retransmit=9 bytes_invalid=0 send_seq=72741 receive_seq=72741 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996559 heater_bed: target=60 temp=60.0 pwm=0.360 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=711767 sysload=0.59 cputime=172.023 memavail=718560 print_time=2585.632 buffer_time=2.037 print_stall=0 extruder: target=200 temp=200.0 pwm=0.671
Stats 2582.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3238764 bytes_read=1099573 bytes_retransmit=9 bytes_invalid=0 send_seq=72787 receive_seq=72787 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996554 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=712048 sysload=0.54 cputime=172.099 memavail=718812 print_time=2586.891 buffer_time=2.294 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 2583.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3241911 bytes_read=1100182 bytes_retransmit=9 bytes_invalid=0 send_seq=72846 receive_seq=72846 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996551 heater_bed: target=60 temp=60.0 pwm=0.353 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=712532 sysload=0.54 cputime=172.177 memavail=718308 print_time=2588.087 buffer_time=2.486 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 2584.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3242622 bytes_read=1100589 bytes_retransmit=9 bytes_invalid=0 send_seq=72865 receive_seq=72865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996549 heater_bed: target=60 temp=60.0 pwm=0.427 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=712600 sysload=0.54 cputime=172.247 memavail=718560 print_time=2588.697 buffer_time=2.093 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 2585.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3243851 bytes_read=1101013 bytes_retransmit=9 bytes_invalid=0 send_seq=72893 receive_seq=72893 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996634 heater_bed: target=60 temp=60.0 pwm=0.367 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=712803 sysload=0.54 cputime=172.323 memavail=718064 print_time=2589.900 buffer_time=2.294 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 2586.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3244805 bytes_read=1101446 bytes_retransmit=9 bytes_invalid=0 send_seq=72917 receive_seq=72917 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=712938 sysload=0.54 cputime=172.395 memavail=718072 print_time=2590.666 buffer_time=2.057 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 2587.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3246194 bytes_read=1101889 bytes_retransmit=9 bytes_invalid=0 send_seq=72946 receive_seq=72946 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996630 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=713140 sysload=0.50 cputime=172.468 memavail=717824 print_time=2591.759 buffer_time=2.148 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 2588.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3247451 bytes_read=1102323 bytes_retransmit=9 bytes_invalid=0 send_seq=72973 receive_seq=72973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996629 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=713343 sysload=0.50 cputime=172.542 memavail=718076 print_time=2592.768 buffer_time=2.155 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 2589.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3248946 bytes_read=1102791 bytes_retransmit=9 bytes_invalid=0 send_seq=73004 receive_seq=73004 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996627 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=713544 sysload=0.50 cputime=172.615 memavail=718024 print_time=2593.715 buffer_time=2.099 print_stall=0 extruder: target=200 temp=199.9 pwm=0.684
Stats 2590.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3250699 bytes_read=1103279 bytes_retransmit=9 bytes_invalid=0 send_seq=73042 receive_seq=73042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=167996619 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=713823 sysload=0.50 cputime=172.693 memavail=717592 print_time=2594.857 buffer_time=2.238 print_stall=0 extruder: target=200 temp=199.8 pwm=0.680
Stats 2591.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3252380 bytes_read=1103733 bytes_retransmit=9 bytes_invalid=0 send_seq=73076 receive_seq=73076 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996625 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=714093 sysload=0.50 cputime=172.767 memavail=717592 print_time=2595.873 buffer_time=2.251 print_stall=0 extruder: target=200 temp=199.9 pwm=0.680
Stats 2592.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3253953 bytes_read=1104206 bytes_retransmit=9 bytes_invalid=0 send_seq=73108 receive_seq=73108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=714363 sysload=0.46 cputime=172.846 memavail=717848 print_time=2597.006 buffer_time=2.379 print_stall=0 extruder: target=200 temp=199.9 pwm=0.680
Stats 2593.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3255496 bytes_read=1104679 bytes_retransmit=9 bytes_invalid=0 send_seq=73140 receive_seq=73140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=714635 sysload=0.46 cputime=172.920 memavail=717848 print_time=2598.004 buffer_time=2.374 print_stall=0 extruder: target=200 temp=200.0 pwm=0.680
Stats 2594.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3258172 bytes_read=1105223 bytes_retransmit=9 bytes_invalid=0 send_seq=73192 receive_seq=73192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.381 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=715098 sysload=0.46 cputime=172.995 memavail=718100 print_time=2599.234 buffer_time=2.601 print_stall=0 extruder: target=200 temp=200.0 pwm=0.644
Stats 2595.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3260210 bytes_read=1105746 bytes_retransmit=9 bytes_invalid=0 send_seq=73234 receive_seq=73234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.365 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=715458 sysload=0.46 cputime=173.069 memavail=718108 print_time=2600.029 buffer_time=2.393 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2596.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3262205 bytes_read=1106254 bytes_retransmit=9 bytes_invalid=0 send_seq=73276 receive_seq=73276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.463 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=715866 sysload=0.46 cputime=173.144 memavail=718308 print_time=2600.683 buffer_time=2.043 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2597.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3265906 bytes_read=1106883 bytes_retransmit=9 bytes_invalid=0 send_seq=73345 receive_seq=73345 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=716611 sysload=0.42 cputime=173.232 memavail=718492 print_time=2601.917 buffer_time=2.275 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2598.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3267990 bytes_read=1107426 bytes_retransmit=9 bytes_invalid=0 send_seq=73388 receive_seq=73388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.287 raspberry_pi: temp=44.3 mcu_temp: temp=39.1 sd_pos=716950 sysload=0.42 cputime=173.311 memavail=718240 print_time=2602.764 buffer_time=2.119 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2599.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3269630 bytes_read=1107894 bytes_retransmit=9 bytes_invalid=0 send_seq=73422 receive_seq=73422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=44.3 mcu_temp: temp=38.9 sd_pos=717222 sysload=0.42 cputime=173.388 memavail=718516 print_time=2603.818 buffer_time=2.171 print_stall=0 extruder: target=200 temp=200.2 pwm=0.664
Stats 2600.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3272102 bytes_read=1108413 bytes_retransmit=9 bytes_invalid=0 send_seq=73469 receive_seq=73469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996602 heater_bed: target=60 temp=60.0 pwm=0.388 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=717627 sysload=0.42 cputime=173.464 memavail=718252 print_time=2605.069 buffer_time=2.420 print_stall=0 extruder: target=200 temp=200.2 pwm=0.664
Stats 2601.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3274113 bytes_read=1108940 bytes_retransmit=9 bytes_invalid=0 send_seq=73509 receive_seq=73509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996596 heater_bed: target=60 temp=60.0 pwm=0.297 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=717909 sysload=0.42 cputime=173.546 memavail=718304 print_time=2605.854 buffer_time=2.201 print_stall=0 extruder: target=200 temp=200.3 pwm=0.604
Stats 2602.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3275120 bytes_read=1109344 bytes_retransmit=9 bytes_invalid=0 send_seq=73533 receive_seq=73533 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.323 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=718043 sysload=0.39 cputime=173.619 memavail=718304 print_time=2606.878 buffer_time=2.222 print_stall=0 extruder: target=200 temp=200.2 pwm=0.604
Stats 2603.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3276060 bytes_read=1109773 bytes_retransmit=9 bytes_invalid=0 send_seq=73556 receive_seq=73556 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=718177 sysload=0.39 cputime=173.692 memavail=718324 print_time=2607.685 buffer_time=2.025 print_stall=0 extruder: target=200 temp=200.3 pwm=0.604
Stats 2604.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3277451 bytes_read=1110230 bytes_retransmit=9 bytes_invalid=0 send_seq=73585 receive_seq=73585 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.403 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=718381 sysload=0.39 cputime=173.766 memavail=718324 print_time=2608.840 buffer_time=2.179 print_stall=0 extruder: target=200 temp=200.2 pwm=0.604
Stats 2605.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3278748 bytes_read=1110653 bytes_retransmit=9 bytes_invalid=0 send_seq=73614 receive_seq=73614 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.312 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=718585 sysload=0.39 cputime=173.844 memavail=718524 print_time=2609.911 buffer_time=2.239 print_stall=0 extruder: target=200 temp=200.2 pwm=0.660
Stats 2606.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3280160 bytes_read=1111092 bytes_retransmit=9 bytes_invalid=0 send_seq=73644 receive_seq=73644 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.350 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=718788 sysload=0.39 cputime=173.924 memavail=718296 print_time=2610.921 buffer_time=2.248 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 2607.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3281934 bytes_read=1111583 bytes_retransmit=9 bytes_invalid=0 send_seq=73680 receive_seq=73680 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.491 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=719058 sysload=0.36 cputime=174.001 memavail=718316 print_time=2612.146 buffer_time=2.472 print_stall=0 extruder: target=200 temp=199.9 pwm=0.720
Stats 2608.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3282906 bytes_read=1112002 bytes_retransmit=9 bytes_invalid=0 send_seq=73704 receive_seq=73704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.331 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=719192 sysload=0.36 cputime=174.074 memavail=718960 print_time=2612.710 buffer_time=2.036 print_stall=0 extruder: target=200 temp=199.8 pwm=0.720
Stats 2609.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3284512 bytes_read=1112471 bytes_retransmit=9 bytes_invalid=0 send_seq=73738 receive_seq=73738 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=719457 sysload=0.36 cputime=174.148 memavail=718964 print_time=2613.760 buffer_time=2.083 print_stall=0 extruder: target=200 temp=199.8 pwm=0.720
Stats 2610.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3286355 bytes_read=1112968 bytes_retransmit=9 bytes_invalid=0 send_seq=73775 receive_seq=73775 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.404 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=719779 sysload=0.36 cputime=174.231 memavail=719468 print_time=2614.871 buffer_time=2.188 print_stall=0 extruder: target=200 temp=199.7 pwm=0.720
Stats 2611.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3287217 bytes_read=1113357 bytes_retransmit=9 bytes_invalid=0 send_seq=73796 receive_seq=73796 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.296 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=719843 sysload=0.36 cputime=174.303 memavail=719728 print_time=2615.758 buffer_time=2.075 print_stall=0 extruder: target=200 temp=199.7 pwm=0.720
Stats 2612.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3288517 bytes_read=1113801 bytes_retransmit=9 bytes_invalid=0 send_seq=73826 receive_seq=73825 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.501 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=719974 sysload=0.41 cputime=174.377 memavail=720484 print_time=2617.120 buffer_time=2.436 print_stall=0 extruder: target=200 temp=199.7 pwm=0.737
Stats 2613.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3289661 bytes_read=1114279 bytes_retransmit=9 bytes_invalid=0 send_seq=73853 receive_seq=73853 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=44.5 mcu_temp: temp=39.2 sd_pos=720068 sysload=0.41 cputime=174.450 memavail=720232 print_time=2618.463 buffer_time=2.776 print_stall=0 extruder: target=200 temp=199.7 pwm=0.737
Stats 2614.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3290291 bytes_read=1114653 bytes_retransmit=9 bytes_invalid=0 send_seq=73871 receive_seq=73871 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.391 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=720138 sysload=0.41 cputime=174.521 memavail=720428 print_time=2618.970 buffer_time=2.280 print_stall=0 extruder: target=200 temp=199.8 pwm=0.685
Stats 2615.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3292150 bytes_read=1115142 bytes_retransmit=9 bytes_invalid=0 send_seq=73909 receive_seq=73909 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.337 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=720286 sysload=0.41 cputime=174.597 memavail=720488 print_time=2620.862 buffer_time=3.168 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 2616.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3292307 bytes_read=1115509 bytes_retransmit=9 bytes_invalid=0 send_seq=73920 receive_seq=73920 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=720286 sysload=0.41 cputime=174.664 memavail=719740 print_time=2620.862 buffer_time=2.166 print_stall=0 extruder: target=200 temp=199.9 pwm=0.685
Stats 2617.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000054 bytes_write=3294652 bytes_read=1116023 bytes_retransmit=9 bytes_invalid=0 send_seq=73966 receive_seq=73966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.378 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=721159 sysload=0.37 cputime=174.746 memavail=719740 print_time=2622.035 buffer_time=2.336 print_stall=0 extruder: target=200 temp=200.0 pwm=0.685
Stats 2618.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3296728 bytes_read=1116547 bytes_retransmit=9 bytes_invalid=0 send_seq=74008 receive_seq=74008 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.338 raspberry_pi: temp=44.9 mcu_temp: temp=39.1 sd_pos=721868 sysload=0.37 cputime=174.827 memavail=719796 print_time=2622.940 buffer_time=2.239 print_stall=0 extruder: target=200 temp=200.0 pwm=0.625
Stats 2619.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3298537 bytes_read=1117044 bytes_retransmit=9 bytes_invalid=0 send_seq=74045 receive_seq=74045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.454 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=722479 sysload=0.37 cputime=174.905 memavail=719976 print_time=2623.782 buffer_time=2.076 print_stall=0 extruder: target=200 temp=200.1 pwm=0.625
Stats 2620.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3300661 bytes_read=1117543 bytes_retransmit=9 bytes_invalid=0 send_seq=74088 receive_seq=74088 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.389 raspberry_pi: temp=44.9 mcu_temp: temp=39.0 sd_pos=723182 sysload=0.37 cputime=174.984 memavail=719996 print_time=2624.759 buffer_time=2.050 print_stall=0 extruder: target=200 temp=200.1 pwm=0.625
Stats 2621.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3303676 bytes_read=1118146 bytes_retransmit=9 bytes_invalid=0 send_seq=74146 receive_seq=74146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996555 heater_bed: target=60 temp=60.0 pwm=0.319 raspberry_pi: temp=45.0 mcu_temp: temp=39.0 sd_pos=723974 sysload=0.37 cputime=175.072 memavail=720028 print_time=2626.370 buffer_time=2.657 print_stall=0 extruder: target=200 temp=200.1 pwm=0.625
Stats 2622.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3304637 bytes_read=1118569 bytes_retransmit=9 bytes_invalid=0 send_seq=74171 receive_seq=74171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=45.2 mcu_temp: temp=39.0 sd_pos=724143 sysload=0.51 cputime=175.147 memavail=720040 print_time=2627.195 buffer_time=2.481 print_stall=0 extruder: target=200 temp=200.1 pwm=0.625
Stats 2623.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3305702 bytes_read=1118993 bytes_retransmit=9 bytes_invalid=0 send_seq=74196 receive_seq=74196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=724479 sysload=0.51 cputime=175.226 memavail=720148 print_time=2628.407 buffer_time=2.690 print_stall=0 extruder: target=200 temp=200.1 pwm=0.625
Stats 2624.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3306944 bytes_read=1119446 bytes_retransmit=9 bytes_invalid=0 send_seq=74224 receive_seq=74224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.400 raspberry_pi: temp=44.9 mcu_temp: temp=38.9 sd_pos=724660 sysload=0.51 cputime=175.300 memavail=720400 print_time=2629.277 buffer_time=2.557 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 2625.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3307683 bytes_read=1119844 bytes_retransmit=9 bytes_invalid=0 send_seq=74244 receive_seq=74244 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=45.1 mcu_temp: temp=39.0 sd_pos=724750 sysload=0.51 cputime=175.373 memavail=720400 print_time=2630.390 buffer_time=2.668 print_stall=0 extruder: target=200 temp=200.0 pwm=0.692
Stats 2626.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3308071 bytes_read=1120193 bytes_retransmit=9 bytes_invalid=0 send_seq=74257 receive_seq=74257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=60 temp=60.0 pwm=0.399 raspberry_pi: temp=45.2 mcu_temp: temp=38.9 sd_pos=724782 sysload=0.51 cputime=175.443 memavail=720156 print_time=2631.210 buffer_time=2.484 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 2627.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3309401 bytes_read=1120666 bytes_retransmit=9 bytes_invalid=0 send_seq=74289 receive_seq=74289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=45.2 mcu_temp: temp=39.1 sd_pos=724909 sysload=0.46 cputime=175.518 memavail=720408 print_time=2633.356 buffer_time=3.627 print_stall=0 extruder: target=200 temp=199.9 pwm=0.692
Stats 2628.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3309574 bytes_read=1121039 bytes_retransmit=9 bytes_invalid=0 send_seq=74301 receive_seq=74301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.343 raspberry_pi: temp=44.7 mcu_temp: temp=38.9 sd_pos=724909 sysload=0.46 cputime=175.586 memavail=719652 print_time=2633.356 buffer_time=2.624 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 2629.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3310671 bytes_read=1121453 bytes_retransmit=9 bytes_invalid=0 send_seq=74328 receive_seq=74327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.395 raspberry_pi: temp=44.4 mcu_temp: temp=39.0 sd_pos=725245 sysload=0.46 cputime=175.664 memavail=719412 print_time=2634.102 buffer_time=2.362 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 2630.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3311271 bytes_read=1121849 bytes_retransmit=9 bytes_invalid=0 send_seq=74344 receive_seq=74344 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.4 mcu_temp: temp=38.9 sd_pos=725516 sysload=0.46 cputime=175.736 memavail=719420 print_time=2634.734 buffer_time=1.994 print_stall=0 extruder: target=200 temp=199.9 pwm=0.700
Stats 2631.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3312439 bytes_read=1122271 bytes_retransmit=9 bytes_invalid=0 send_seq=74371 receive_seq=74371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=726292 sysload=0.46 cputime=175.819 memavail=717976 print_time=2635.938 buffer_time=2.195 print_stall=0 extruder: target=200 temp=199.9 pwm=0.646
Stats 2632.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3313989 bytes_read=1122726 bytes_retransmit=9 bytes_invalid=0 send_seq=74406 receive_seq=74406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.431 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=726569 sysload=0.43 cputime=175.896 memavail=718492 print_time=2636.850 buffer_time=2.105 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2633.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3314587 bytes_read=1123153 bytes_retransmit=9 bytes_invalid=0 send_seq=74423 receive_seq=74423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=43.9 mcu_temp: temp=39.2 sd_pos=726633 sysload=0.43 cputime=175.969 memavail=718492 print_time=2638.312 buffer_time=2.562 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2634.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3316283 bytes_read=1123617 bytes_retransmit=9 bytes_invalid=0 send_seq=74459 receive_seq=74459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=726967 sysload=0.43 cputime=176.043 memavail=718468 print_time=2640.178 buffer_time=3.425 print_stall=0 extruder: target=200 temp=200.0 pwm=0.646
Stats 2635.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3316435 bytes_read=1123951 bytes_retransmit=9 bytes_invalid=0 send_seq=74469 receive_seq=74469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=43.7 mcu_temp: temp=39.1 sd_pos=726967 sysload=0.43 cputime=176.111 memavail=718524 print_time=2640.178 buffer_time=2.422 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2636.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3317834 bytes_read=1124428 bytes_retransmit=9 bytes_invalid=0 send_seq=74499 receive_seq=74499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=727237 sysload=0.43 cputime=176.192 memavail=717792 print_time=2640.994 buffer_time=2.234 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2637.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000015 mcu_task_stddev=0.000055 bytes_write=3319109 bytes_read=1124847 bytes_retransmit=9 bytes_invalid=0 send_seq=74526 receive_seq=74526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=727440 sysload=0.39 cputime=176.266 memavail=718412 print_time=2641.857 buffer_time=2.094 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2638.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3320637 bytes_read=1125321 bytes_retransmit=9 bytes_invalid=0 send_seq=74558 receive_seq=74558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996589 heater_bed: target=60 temp=60.0 pwm=0.345 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=727706 sysload=0.39 cputime=176.341 memavail=717936 print_time=2643.008 buffer_time=2.242 print_stall=0 extruder: target=200 temp=200.0 pwm=0.658
Stats 2639.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3322232 bytes_read=1125803 bytes_retransmit=9 bytes_invalid=0 send_seq=74592 receive_seq=74592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=727973 sysload=0.39 cputime=176.416 memavail=717996 print_time=2644.063 buffer_time=2.295 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 2640.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3323749 bytes_read=1126247 bytes_retransmit=9 bytes_invalid=0 send_seq=74624 receive_seq=74624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.433 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=728210 sysload=0.39 cputime=176.489 memavail=718088 print_time=2644.945 buffer_time=2.175 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 2641.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3324940 bytes_read=1126681 bytes_retransmit=9 bytes_invalid=0 send_seq=74651 receive_seq=74651 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=167996586 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.9 mcu_temp: temp=39.3 sd_pos=728371 sysload=0.39 cputime=176.563 memavail=717480 print_time=2645.904 buffer_time=2.131 print_stall=0 extruder: target=200 temp=200.0 pwm=0.667
Stats 2642.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3326121 bytes_read=1127123 bytes_retransmit=9 bytes_invalid=0 send_seq=74677 receive_seq=74677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=728570 sysload=0.36 cputime=176.637 memavail=717352 print_time=2647.111 buffer_time=2.335 print_stall=0 extruder: target=200 temp=199.9 pwm=0.667
Stats 2643.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3326988 bytes_read=1127532 bytes_retransmit=9 bytes_invalid=0 send_seq=74699 receive_seq=74699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=43.8 mcu_temp: temp=39.2 sd_pos=728705 sysload=0.36 cputime=176.710 memavail=717556 print_time=2648.035 buffer_time=2.255 print_stall=0 extruder: target=200 temp=199.9 pwm=0.728
Stats 2644.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3327858 bytes_read=1127936 bytes_retransmit=9 bytes_invalid=0 send_seq=74720 receive_seq=74720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.356 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=728840 sysload=0.36 cputime=176.785 memavail=718112 print_time=2649.025 buffer_time=2.243 print_stall=0 extruder: target=200 temp=199.8 pwm=0.728
Stats 2645.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3328759 bytes_read=1128358 bytes_retransmit=9 bytes_invalid=0 send_seq=74742 receive_seq=74742 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.410 raspberry_pi: temp=43.6 mcu_temp: temp=39.1 sd_pos=728976 sysload=0.36 cputime=176.857 memavail=717860 print_time=2649.941 buffer_time=2.155 print_stall=0 extruder: target=200 temp=199.8 pwm=0.728
Stats 2646.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3329931 bytes_read=1128777 bytes_retransmit=9 bytes_invalid=0 send_seq=74769 receive_seq=74769 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996597 heater_bed: target=60 temp=60.0 pwm=0.461 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=729178 sysload=0.36 cputime=176.933 memavail=717364 print_time=2651.134 buffer_time=2.345 print_stall=0 extruder: target=200 temp=199.9 pwm=0.728
Stats 2647.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3331342 bytes_read=1129236 bytes_retransmit=9 bytes_invalid=0 send_seq=74801 receive_seq=74801 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996590 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=729382 sysload=0.33 cputime=177.006 memavail=717568 print_time=2652.088 buffer_time=2.296 print_stall=0 extruder: target=200 temp=199.9 pwm=0.681
Stats 2648.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3333262 bytes_read=1129753 bytes_retransmit=9 bytes_invalid=0 send_seq=74839 receive_seq=74839 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.419 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=729717 sysload=0.33 cputime=177.081 memavail=717396 print_time=2653.169 buffer_time=2.375 print_stall=0 extruder: target=200 temp=200.0 pwm=0.681
Stats 2649.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3336365 bytes_read=1130332 bytes_retransmit=9 bytes_invalid=0 send_seq=74898 receive_seq=74898 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.352 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=730246 sysload=0.33 cputime=177.158 memavail=717424 print_time=2654.236 buffer_time=2.438 print_stall=0 extruder: target=200 temp=200.0 pwm=0.629
Stats 2650.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3339282 bytes_read=1130906 bytes_retransmit=9 bytes_invalid=0 send_seq=74953 receive_seq=74953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=167996584 heater_bed: target=60 temp=60.0 pwm=0.488 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=730780 sysload=0.33 cputime=177.238 memavail=717672 print_time=2655.256 buffer_time=2.452 print_stall=0 extruder: target=200 temp=200.1 pwm=0.629
Stats 2651.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3342171 bytes_read=1131488 bytes_retransmit=9 bytes_invalid=0 send_seq=75007 receive_seq=75007 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=731305 sysload=0.33 cputime=177.315 memavail=717172 print_time=2656.292 buffer_time=2.487 print_stall=0 extruder: target=200 temp=200.1 pwm=0.629
Stats 2652.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=3343241 bytes_read=1131913 bytes_retransmit=9 bytes_invalid=0 send_seq=75032 receive_seq=75032 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996599 heater_bed: target=60 temp=60.0 pwm=0.335 raspberry_pi: temp=43.8 mcu_temp: temp=38.9 sd_pos=731439 sysload=0.30 cputime=177.387 memavail=717180 print_time=2656.936 buffer_time=2.129 print_stall=0 extruder: target=200 temp=200.2 pwm=0.629
Stats 2653.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=3344894 bytes_read=1132396 bytes_retransmit=9 bytes_invalid=0 send_seq=75066 receive_seq=75066 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.394 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=731709 sysload=0.30 cputime=177.462 memavail=717324 print_time=2657.992 buffer_time=2.181 print_stall=0 extruder: target=200 temp=200.2 pwm=0.644
Stats 2654.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=3346472 bytes_read=1132864 bytes_retransmit=9 bytes_invalid=0 send_seq=75100 receive_seq=75100 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.463 raspberry_pi: temp=43.5 mcu_temp: temp=39.0 sd_pos=731981 sysload=0.30 cputime=177.535 memavail=717608 print_time=2658.934 buffer_time=2.122 print_stall=0 extruder: target=200 temp=200.2 pwm=0.644
Stats 2655.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=3348207 bytes_read=1133328 bytes_retransmit=9 bytes_invalid=0 send_seq=75136 receive_seq=75136 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=43.6 mcu_temp: temp=39.1 sd_pos=732249 sysload=0.30 cputime=177.610 memavail=718180 print_time=2660.001 buffer_time=2.186 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2656.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=3349424 bytes_read=1133768 bytes_retransmit=9 bytes_invalid=0 send_seq=75163 receive_seq=75163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=167996593 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.3 mcu_temp: temp=39.1 sd_pos=732451 sysload=0.30 cputime=177.685 memavail=717684 print_time=2661.006 buffer_time=2.187 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 2657.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3350618 bytes_read=1134202 bytes_retransmit=9 bytes_invalid=0 send_seq=75189 receive_seq=75189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.385 raspberry_pi: temp=44.2 mcu_temp: temp=39.0 sd_pos=732655 sysload=0.60 cputime=177.762 memavail=717692 print_time=2662.229 buffer_time=2.409 print_stall=0 extruder: target=200 temp=200.0 pwm=0.712
Stats 2658.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3351517 bytes_read=1134600 bytes_retransmit=9 bytes_invalid=0 send_seq=75212 receive_seq=75212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996582 heater_bed: target=60 temp=60.0 pwm=0.430 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=732791 sysload=0.60 cputime=177.833 memavail=717200 print_time=2663.178 buffer_time=2.355 print_stall=0 extruder: target=200 temp=200.0 pwm=0.712
Stats 2659.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3352388 bytes_read=1135023 bytes_retransmit=9 bytes_invalid=0 send_seq=75234 receive_seq=75234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=167996577 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=732927 sysload=0.60 cputime=177.906 memavail=716948 print_time=2664.113 buffer_time=2.287 print_stall=0 extruder: target=200 temp=199.9 pwm=0.712
Stats 2660.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3353306 bytes_read=1135431 bytes_retransmit=9 bytes_invalid=0 send_seq=75256 receive_seq=75256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996579 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=733063 sysload=0.60 cputime=177.976 memavail=716948 print_time=2664.961 buffer_time=2.134 print_stall=0 extruder: target=200 temp=199.9 pwm=0.712
Stats 2661.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3354913 bytes_read=1135885 bytes_retransmit=9 bytes_invalid=0 send_seq=75290 receive_seq=75290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996575 heater_bed: target=60 temp=60.0 pwm=0.407 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=733334 sysload=0.60 cputime=178.052 memavail=716952 print_time=2666.356 buffer_time=2.525 print_stall=0 extruder: target=200 temp=199.9 pwm=0.663
Stats 2662.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3355810 bytes_read=1136328 bytes_retransmit=9 bytes_invalid=0 send_seq=75313 receive_seq=75313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=44.1 mcu_temp: temp=39.2 sd_pos=733469 sysload=0.55 cputime=178.126 memavail=716712 print_time=2666.902 buffer_time=2.069 print_stall=0 extruder: target=200 temp=200.0 pwm=0.663
Stats 2663.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3358932 bytes_read=1136926 bytes_retransmit=9 bytes_invalid=0 send_seq=75373 receive_seq=75373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996567 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=734009 sysload=0.55 cputime=178.205 memavail=716720 print_time=2668.141 buffer_time=2.305 print_stall=0 extruder: target=200 temp=200.0 pwm=0.663
Stats 2664.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3362804 bytes_read=1137570 bytes_retransmit=9 bytes_invalid=0 send_seq=75445 receive_seq=75445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.387 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=734820 sysload=0.55 cputime=178.290 memavail=717184 print_time=2669.445 buffer_time=2.606 print_stall=0 extruder: target=200 temp=200.1 pwm=0.663
Stats 2665.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3364790 bytes_read=1138088 bytes_retransmit=9 bytes_invalid=0 send_seq=75486 receive_seq=75486 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.359 raspberry_pi: temp=44.5 mcu_temp: temp=39.2 sd_pos=735226 sysload=0.55 cputime=178.365 memavail=717232 print_time=2670.097 buffer_time=2.254 print_stall=0 extruder: target=200 temp=200.1 pwm=0.663
Stats 2666.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3366791 bytes_read=1138592 bytes_retransmit=9 bytes_invalid=0 send_seq=75525 receive_seq=75525 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=735438 sysload=0.55 cputime=178.443 memavail=717484 print_time=2671.069 buffer_time=2.223 print_stall=0 extruder: target=200 temp=200.1 pwm=0.629
Stats 2667.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3368843 bytes_read=1139097 bytes_retransmit=9 bytes_invalid=0 send_seq=75566 receive_seq=75566 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.369 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=735769 sysload=0.75 cputime=178.522 memavail=717012 print_time=2672.339 buffer_time=2.491 print_stall=0 extruder: target=200 temp=200.2 pwm=0.629
Stats 2668.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3370436 bytes_read=1139589 bytes_retransmit=9 bytes_invalid=0 send_seq=75599 receive_seq=75599 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.9 mcu_temp: temp=39.2 sd_pos=736059 sysload=0.75 cputime=178.599 memavail=717188 print_time=2672.973 buffer_time=2.124 print_stall=0 extruder: target=200 temp=200.3 pwm=0.629
Stats 2669.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3372048 bytes_read=1140038 bytes_retransmit=9 bytes_invalid=0 send_seq=75632 receive_seq=75632 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.371 raspberry_pi: temp=43.9 mcu_temp: temp=39.1 sd_pos=736317 sysload=0.75 cputime=178.678 memavail=717284 print_time=2674.145 buffer_time=2.295 print_stall=0 extruder: target=200 temp=200.3 pwm=0.629
Stats 2670.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3373185 bytes_read=1140457 bytes_retransmit=9 bytes_invalid=0 send_seq=75659 receive_seq=75659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.336 raspberry_pi: temp=44.1 mcu_temp: temp=39.2 sd_pos=736411 sysload=0.75 cputime=178.752 memavail=717488 print_time=2675.451 buffer_time=2.601 print_stall=0 extruder: target=200 temp=200.3 pwm=0.625
Stats 2671.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3373798 bytes_read=1140869 bytes_retransmit=9 bytes_invalid=0 send_seq=75676 receive_seq=75676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=736480 sysload=0.75 cputime=178.815 memavail=717300 print_time=2675.946 buffer_time=2.095 print_stall=0 extruder: target=200 temp=200.3 pwm=0.625
Stats 2672.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3374943 bytes_read=1141288 bytes_retransmit=9 bytes_invalid=0 send_seq=75703 receive_seq=75703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.296 raspberry_pi: temp=44.1 mcu_temp: temp=39.2 sd_pos=736574 sysload=0.69 cputime=178.885 memavail=717072 print_time=2677.289 buffer_time=2.437 print_stall=0 extruder: target=200 temp=200.3 pwm=0.625
Stats 2673.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000058 bytes_write=3375884 bytes_read=1141702 bytes_retransmit=9 bytes_invalid=0 send_seq=75726 receive_seq=75726 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=736676 sysload=0.69 cputime=178.956 memavail=717432 print_time=2678.258 buffer_time=2.406 print_stall=0 extruder: target=200 temp=200.2 pwm=0.625
Stats 2674.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000058 bytes_write=3377456 bytes_read=1142199 bytes_retransmit=9 bytes_invalid=0 send_seq=75760 receive_seq=75760 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996557 heater_bed: target=60 temp=60.0 pwm=0.363 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=736794 sysload=0.69 cputime=179.026 memavail=717228 print_time=2679.687 buffer_time=2.834 print_stall=0 extruder: target=200 temp=200.1 pwm=0.629
Stats 2675.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000058 bytes_write=3378554 bytes_read=1142613 bytes_retransmit=9 bytes_invalid=0 send_seq=75786 receive_seq=75786 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.434 raspberry_pi: temp=43.7 mcu_temp: temp=39.1 sd_pos=737161 sysload=0.69 cputime=179.097 memavail=717480 print_time=2680.162 buffer_time=2.308 print_stall=0 extruder: target=200 temp=200.1 pwm=0.683
Stats 2676.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000058 bytes_write=3379983 bytes_read=1143057 bytes_retransmit=9 bytes_invalid=0 send_seq=75818 receive_seq=75818 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=60 temp=60.0 pwm=0.398 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=737668 sysload=0.69 cputime=179.170 memavail=717708 print_time=2680.861 buffer_time=2.006 print_stall=0 extruder: target=200 temp=200.0 pwm=0.683
Stats 2677.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000058 bytes_write=3382344 bytes_read=1143619 bytes_retransmit=9 bytes_invalid=0 send_seq=75865 receive_seq=75865 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=738546 sysload=0.71 cputime=179.253 memavail=717524 print_time=2681.884 buffer_time=2.029 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2678.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3385736 bytes_read=1144228 bytes_retransmit=9 bytes_invalid=0 send_seq=75927 receive_seq=75927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=167996609 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=43.7 mcu_temp: temp=39.0 sd_pos=739690 sysload=0.71 cputime=179.340 memavail=717480 print_time=2683.585 buffer_time=2.730 print_stall=0 extruder: target=200 temp=199.9 pwm=0.683
Stats 2679.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3386841 bytes_read=1144642 bytes_retransmit=9 bytes_invalid=0 send_seq=75953 receive_seq=75953 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996603 heater_bed: target=60 temp=60.0 pwm=0.384 raspberry_pi: temp=44.0 mcu_temp: temp=39.1 sd_pos=739859 sysload=0.71 cputime=179.408 memavail=717552 print_time=2684.084 buffer_time=2.228 print_stall=0 extruder: target=200 temp=199.8 pwm=0.678
Stats 2680.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3388943 bytes_read=1145184 bytes_retransmit=9 bytes_invalid=0 send_seq=75996 receive_seq=75996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=740483 sysload=0.71 cputime=179.485 memavail=718308 print_time=2685.196 buffer_time=2.339 print_stall=0 extruder: target=200 temp=199.7 pwm=0.678
Stats 2681.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3389838 bytes_read=1145576 bytes_retransmit=9 bytes_invalid=0 send_seq=76018 receive_seq=76018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=740652 sysload=0.71 cputime=179.552 memavail=718308 print_time=2686.021 buffer_time=2.163 print_stall=0 extruder: target=200 temp=199.8 pwm=0.678
Stats 2682.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3390905 bytes_read=1145984 bytes_retransmit=9 bytes_invalid=0 send_seq=76042 receive_seq=76042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.443 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=740987 sysload=0.74 cputime=179.622 memavail=718508 print_time=2687.233 buffer_time=2.374 print_stall=0 extruder: target=200 temp=199.7 pwm=0.678
Stats 2683.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3392155 bytes_read=1146446 bytes_retransmit=9 bytes_invalid=0 send_seq=76070 receive_seq=76070 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.4 mcu_temp: temp=39.2 sd_pos=741170 sysload=0.74 cputime=179.692 memavail=718820 print_time=2688.103 buffer_time=2.244 print_stall=0 extruder: target=200 temp=199.7 pwm=0.710
Stats 2684.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3392907 bytes_read=1146825 bytes_retransmit=9 bytes_invalid=0 send_seq=76089 receive_seq=76089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=44.1 mcu_temp: temp=38.9 sd_pos=741261 sysload=0.74 cputime=179.765 memavail=718772 print_time=2689.216 buffer_time=2.355 print_stall=0 extruder: target=200 temp=199.7 pwm=0.710
Stats 2685.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3393237 bytes_read=1147189 bytes_retransmit=9 bytes_invalid=0 send_seq=76102 receive_seq=76102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=60 temp=60.0 pwm=0.383 raspberry_pi: temp=43.6 mcu_temp: temp=39.2 sd_pos=741293 sysload=0.74 cputime=179.829 memavail=718824 print_time=2690.036 buffer_time=2.174 print_stall=0 extruder: target=200 temp=199.7 pwm=0.710
Stats 2686.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3394530 bytes_read=1147646 bytes_retransmit=9 bytes_invalid=0 send_seq=76131 receive_seq=76131 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=60 temp=60.0 pwm=0.455 raspberry_pi: temp=44.5 mcu_temp: temp=39.2 sd_pos=741422 sysload=0.74 cputime=179.899 memavail=719100 print_time=2692.182 buffer_time=3.319 print_stall=0 extruder: target=200 temp=199.8 pwm=0.710
Stats 2687.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=3394703 bytes_read=1147990 bytes_retransmit=9 bytes_invalid=0 send_seq=76143 receive_seq=76143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=60 temp=60.0 pwm=0.392 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=741422 sysload=0.76 cputime=179.963 memavail=719104 print_time=2692.182 buffer_time=2.318 print_stall=0 extruder: target=200 temp=199.8 pwm=0.686
Stats 2688.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3395657 bytes_read=1148419 bytes_retransmit=9 bytes_invalid=0 send_seq=76166 receive_seq=76166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996573 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=44.7 mcu_temp: temp=39.2 sd_pos=741752 sysload=0.76 cputime=180.040 memavail=718876 print_time=2692.927 buffer_time=2.063 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2689.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3396704 bytes_read=1148851 bytes_retransmit=9 bytes_invalid=0 send_seq=76190 receive_seq=76190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.332 raspberry_pi: temp=44.6 mcu_temp: temp=39.2 sd_pos=742536 sysload=0.76 cputime=180.122 memavail=719136 print_time=2694.141 buffer_time=2.277 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2690.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3398020 bytes_read=1149280 bytes_retransmit=9 bytes_invalid=0 send_seq=76219 receive_seq=76219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=167996563 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=743012 sysload=0.76 cputime=180.193 memavail=719396 print_time=2695.207 buffer_time=2.342 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 2691.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3399150 bytes_read=1149714 bytes_retransmit=9 bytes_invalid=0 send_seq=76246 receive_seq=76246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=167996565 heater_bed: target=60 temp=60.0 pwm=0.440 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=743117 sysload=0.76 cputime=180.263 memavail=719144 print_time=2696.411 buffer_time=2.545 print_stall=0 extruder: target=200 temp=200.0 pwm=0.631
Stats 2692.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3399517 bytes_read=1150096 bytes_retransmit=9 bytes_invalid=0 send_seq=76260 receive_seq=76260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=44.1 mcu_temp: temp=39.0 sd_pos=743149 sysload=0.78 cputime=180.329 memavail=719144 print_time=2697.137 buffer_time=2.271 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 2693.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=3400295 bytes_read=1150500 bytes_retransmit=9 bytes_invalid=0 send_seq=76281 receive_seq=76281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=60 temp=60.0 pwm=0.382 raspberry_pi: temp=44.7 mcu_temp: temp=39.2 sd_pos=743220 sysload=0.78 cputime=180.401 memavail=718932 print_time=2698.811 buffer_time=2.943 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 2694.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=3401583 bytes_read=1150954 bytes_retransmit=9 bytes_invalid=0 send_seq=76312 receive_seq=76312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.9 mcu_temp: temp=39.0 sd_pos=743421 sysload=0.78 cputime=180.469 memavail=718888 print_time=2699.653 buffer_time=2.785 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 2695.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=3402886 bytes_read=1151411 bytes_retransmit=9 bytes_invalid=0 send_seq=76341 receive_seq=76341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=167996561 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=45.0 mcu_temp: temp=39.1 sd_pos=743621 sysload=0.78 cputime=180.540 memavail=719192 print_time=2700.093 buffer_time=2.225 print_stall=0 extruder: target=200 temp=200.1 pwm=0.670
Stats 2696.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=3404383 bytes_read=1151855 bytes_retransmit=9 bytes_invalid=0 send_seq=76373 receive_seq=76373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=167996556 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.8 mcu_temp: temp=39.3 sd_pos=743888 sysload=0.78 cputime=180.609 memavail=718940 print_time=2701.015 buffer_time=2.145 print_stall=0 extruder: target=200 temp=200.1 pwm=0.670
Stats 2697.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=3405573 bytes_read=1152284 bytes_retransmit=9 bytes_invalid=0 send_seq=76399 receive_seq=76399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.380 raspberry_pi: temp=44.7 mcu_temp: temp=39.2 sd_pos=744087 sysload=1.12 cputime=180.679 memavail=718940 print_time=2701.958 buffer_time=2.088 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 2698.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3408431 bytes_read=1152891 bytes_retransmit=9 bytes_invalid=0 send_seq=76455 receive_seq=76455 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996559 heater_bed: target=60 temp=60.0 pwm=0.428 raspberry_pi: temp=45.4 mcu_temp: temp=39.0 sd_pos=744629 sysload=1.12 cputime=180.756 memavail=719248 print_time=2703.229 buffer_time=2.358 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 2699.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3411288 bytes_read=1153455 bytes_retransmit=9 bytes_invalid=0 send_seq=76511 receive_seq=76511 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=167996556 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=44.9 mcu_temp: temp=39.1 sd_pos=745171 sysload=1.12 cputime=180.829 memavail=719248 print_time=2704.250 buffer_time=2.379 print_stall=0 extruder: target=200 temp=200.0 pwm=0.686
Stats 2700.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3414147 bytes_read=1154024 bytes_retransmit=9 bytes_invalid=0 send_seq=76565 receive_seq=76565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996562 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=745712 sysload=1.12 cputime=180.902 memavail=719016 print_time=2705.297 buffer_time=2.424 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2701.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3416185 bytes_read=1154536 bytes_retransmit=9 bytes_invalid=0 send_seq=76605 receive_seq=76605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996624 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=44.9 mcu_temp: temp=39.2 sd_pos=746050 sysload=1.12 cputime=180.972 memavail=719500 print_time=2706.268 buffer_time=2.395 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2702.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3418031 bytes_read=1155005 bytes_retransmit=9 bytes_invalid=0 send_seq=76642 receive_seq=76642 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996622 heater_bed: target=60 temp=60.0 pwm=0.376 raspberry_pi: temp=45.1 mcu_temp: temp=39.0 sd_pos=746303 sysload=1.11 cputime=181.042 memavail=719556 print_time=2707.367 buffer_time=2.493 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2703.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3419358 bytes_read=1155465 bytes_retransmit=9 bytes_invalid=0 send_seq=76671 receive_seq=76671 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996616 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=746455 sysload=1.11 cputime=181.109 memavail=719328 print_time=2707.995 buffer_time=2.121 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 2704.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3422444 bytes_read=1156067 bytes_retransmit=9 bytes_invalid=0 send_seq=76729 receive_seq=76729 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996611 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=45.5 mcu_temp: temp=39.0 sd_pos=746940 sysload=1.11 cputime=181.184 memavail=719336 print_time=2709.191 buffer_time=2.316 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 2705.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3423445 bytes_read=1156466 bytes_retransmit=9 bytes_invalid=0 send_seq=76752 receive_seq=76752 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.7 mcu_temp: temp=39.0 sd_pos=747075 sysload=1.11 cputime=181.251 memavail=719084 print_time=2710.207 buffer_time=2.331 print_stall=0 extruder: target=200 temp=199.8 pwm=0.699
Stats 2706.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3424364 bytes_read=1156875 bytes_retransmit=9 bytes_invalid=0 send_seq=76774 receive_seq=76774 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996615 heater_bed: target=60 temp=60.0 pwm=0.397 raspberry_pi: temp=44.9 mcu_temp: temp=39.2 sd_pos=747210 sysload=1.11 cputime=181.318 memavail=719084 print_time=2711.005 buffer_time=2.128 print_stall=0 extruder: target=200 temp=199.9 pwm=0.699
Stats 2707.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3425805 bytes_read=1157330 bytes_retransmit=9 bytes_invalid=0 send_seq=76804 receive_seq=76804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=167996623 heater_bed: target=60 temp=60.0 pwm=0.421 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=747413 sysload=1.02 cputime=181.393 memavail=719340 print_time=2712.147 buffer_time=2.270 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2708.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3427063 bytes_read=1157759 bytes_retransmit=9 bytes_invalid=0 send_seq=76832 receive_seq=76832 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=167996620 heater_bed: target=60 temp=60.0 pwm=0.454 raspberry_pi: temp=44.2 mcu_temp: temp=39.1 sd_pos=747614 sysload=1.02 cputime=181.467 memavail=719096 print_time=2713.204 buffer_time=2.327 print_stall=0 extruder: target=200 temp=199.9 pwm=0.686
Stats 2709.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3428502 bytes_read=1158218 bytes_retransmit=9 bytes_invalid=0 send_seq=76864 receive_seq=76864 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996614 heater_bed: target=60 temp=60.0 pwm=0.413 raspberry_pi: temp=43.7 mcu_temp: temp=39.1 sd_pos=747816 sysload=1.02 cputime=181.539 memavail=719096 print_time=2714.200 buffer_time=2.322 print_stall=0 extruder: target=200 temp=200.0 pwm=0.635
Stats 2710.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3430486 bytes_read=1158720 bytes_retransmit=9 bytes_invalid=0 send_seq=76902 receive_seq=76902 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=167996608 heater_bed: target=60 temp=60.0 pwm=0.362 raspberry_pi: temp=44.2 mcu_temp: temp=38.9 sd_pos=748093 sysload=1.02 cputime=181.616 memavail=719096 print_time=2715.407 buffer_time=2.528 print_stall=0 extruder: target=200 temp=200.1 pwm=0.635
Stats 2711.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3431510 bytes_read=1159129 bytes_retransmit=9 bytes_invalid=0 send_seq=76927 receive_seq=76927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996600 heater_bed: target=60 temp=60.0 pwm=0.342 raspberry_pi: temp=43.8 mcu_temp: temp=39.1 sd_pos=748227 sysload=1.02 cputime=181.687 memavail=718860 print_time=2715.961 buffer_time=2.082 print_stall=0 extruder: target=200 temp=200.1 pwm=0.635
Stats 2712.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3433168 bytes_read=1159603 bytes_retransmit=9 bytes_invalid=0 send_seq=76962 receive_seq=76962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=167996594 heater_bed: target=60 temp=60.0 pwm=0.351 raspberry_pi: temp=43.9 mcu_temp: temp=39.1 sd_pos=748498 sysload=0.94 cputime=181.760 memavail=719136 print_time=2716.978 buffer_time=2.098 print_stall=0 extruder: target=200 temp=200.1 pwm=0.635
Stats 2713.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=3434785 bytes_read=1160100 bytes_retransmit=9 bytes_invalid=0 send_seq=76996 receive_seq=76996 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=167996604 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=748768 sysload=0.94 cputime=181.834 memavail=719336 print_time=2718.110 buffer_time=2.229 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2714.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=3436310 bytes_read=1160544 bytes_retransmit=9 bytes_invalid=0 send_seq=77028 receive_seq=77028 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.402 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=749038 sysload=0.94 cputime=181.901 memavail=719396 print_time=2719.109 buffer_time=2.227 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2715.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=3438962 bytes_read=1161093 bytes_retransmit=9 bytes_invalid=0 send_seq=77078 receive_seq=77078 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.351 raspberry_pi: temp=44.6 mcu_temp: temp=39.0 sd_pos=749500 sysload=0.94 cputime=181.974 memavail=719400 print_time=2720.338 buffer_time=2.456 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2716.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=3440967 bytes_read=1161605 bytes_retransmit=9 bytes_invalid=0 send_seq=77118 receive_seq=77118 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=749860 sysload=0.94 cputime=182.049 memavail=720156 print_time=2721.134 buffer_time=2.251 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2717.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000055 bytes_write=3444738 bytes_read=1162234 bytes_retransmit=9 bytes_invalid=0 send_seq=77187 receive_seq=77187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=167996592 heater_bed: target=60 temp=60.0 pwm=0.405 raspberry_pi: temp=43.9 mcu_temp: temp=39.0 sd_pos=750673 sysload=0.86 cputime=182.123 memavail=719904 print_time=2722.441 buffer_time=2.558 print_stall=0 extruder: target=200 temp=200.1 pwm=0.658
Stats 2718.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3446611 bytes_read=1162738 bytes_retransmit=9 bytes_invalid=0 send_seq=77225 receive_seq=77225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.346 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=751011 sysload=0.86 cputime=182.194 memavail=719284 print_time=2723.022 buffer_time=2.138 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 2719.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3449355 bytes_read=1163315 bytes_retransmit=9 bytes_invalid=0 send_seq=77278 receive_seq=77278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=167996588 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=43.8 mcu_temp: temp=39.0 sd_pos=751487 sysload=0.86 cputime=182.268 memavail=719316 print_time=2724.378 buffer_time=2.493 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 2720.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3450303 bytes_read=1163709 bytes_retransmit=9 bytes_invalid=0 send_seq=77300 receive_seq=77300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.4 mcu_temp: temp=39.2 sd_pos=751623 sysload=0.86 cputime=182.337 memavail=719084 print_time=2724.922 buffer_time=2.036 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 2721.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3452735 bytes_read=1164243 bytes_retransmit=9 bytes_invalid=0 send_seq=77347 receive_seq=77347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=167996587 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.0 mcu_temp: temp=39.0 sd_pos=752025 sysload=0.86 cputime=182.408 memavail=719112 print_time=2726.174 buffer_time=2.287 print_stall=0 extruder: target=200 temp=200.1 pwm=0.652
Stats 2722.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3454746 bytes_read=1164755 bytes_retransmit=9 bytes_invalid=0 send_seq=77387 receive_seq=77387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996581 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=752305 sysload=0.79 cputime=182.480 memavail=719376 print_time=2726.958 buffer_time=2.071 print_stall=0 extruder: target=200 temp=200.2 pwm=0.637
Stats 2723.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3455753 bytes_read=1165174 bytes_retransmit=9 bytes_invalid=0 send_seq=77411 receive_seq=77411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=167996572 heater_bed: target=60 temp=60.0 pwm=0.372 raspberry_pi: temp=43.6 mcu_temp: temp=39.0 sd_pos=752438 sysload=0.79 cputime=182.548 memavail=719072 print_time=2727.982 buffer_time=2.095 print_stall=0 extruder: target=200 temp=200.2 pwm=0.637
Stats 2724.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3457138 bytes_read=1165618 bytes_retransmit=9 bytes_invalid=0 send_seq=77440 receive_seq=77440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=167996568 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.0 mcu_temp: temp=39.2 sd_pos=752640 sysload=0.79 cputime=182.618 memavail=719384 print_time=2729.186 buffer_time=2.298 print_stall=0 extruder: target=200 temp=200.2 pwm=0.637
Stats 2725.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3458122 bytes_read=1166045 bytes_retransmit=9 bytes_invalid=0 send_seq=77463 receive_seq=77463 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996564 heater_bed: target=60 temp=60.0 pwm=0.396 raspberry_pi: temp=44.4 mcu_temp: temp=39.1 sd_pos=752775 sysload=0.79 cputime=182.691 memavail=719424 print_time=2729.944 buffer_time=2.055 print_stall=0 extruder: target=200 temp=200.2 pwm=0.637
Stats 2726.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3459421 bytes_read=1166474 bytes_retransmit=9 bytes_invalid=0 send_seq=77492 receive_seq=77492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167996559 heater_bed: target=60 temp=60.0 pwm=0.374 raspberry_pi: temp=44.1 mcu_temp: temp=38.8 sd_pos=752978 sysload=0.79 cputime=182.760 memavail=719424 print_time=2731.016 buffer_time=2.126 print_stall=0 extruder: target=200 temp=200.1 pwm=0.673
Stats 2727.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=3460815 bytes_read=1166939 bytes_retransmit=9 bytes_invalid=0 send_seq=77523 receive_seq=77523 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996557 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.1 mcu_temp: temp=39.1 sd_pos=753180 sysload=0.73 cputime=182.831 memavail=719680 print_time=2732.025 buffer_time=2.135 print_stall=0 extruder: target=200 temp=200.1 pwm=0.673
Stats 2728.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3462565 bytes_read=1167441 bytes_retransmit=9 bytes_invalid=0 send_seq=77558 receive_seq=77558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=60 temp=60.0 pwm=0.373 raspberry_pi: temp=44.5 mcu_temp: temp=39.0 sd_pos=753449 sysload=0.73 cputime=182.903 memavail=720280 print_time=2733.250 buffer_time=2.359 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Stats 2729.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3464347 bytes_read=1167915 bytes_retransmit=9 bytes_invalid=0 send_seq=77596 receive_seq=77596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996553 heater_bed: target=60 temp=60.0 pwm=0.325 raspberry_pi: temp=44.3 mcu_temp: temp=39.0 sd_pos=753717 sysload=0.73 cputime=182.977 memavail=720484 print_time=2734.347 buffer_time=2.456 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Extrude only move too long (-1248.550mm vs 50.000mm)
See the 'max_extrude_only_distance' config option for details
Stats 2730.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3465546 bytes_read=1168354 bytes_retransmit=9 bytes_invalid=0 send_seq=77624 receive_seq=77624 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=167996550 heater_bed: target=0 temp=60.0 pwm=0.339 raspberry_pi: temp=44.1 mcu_temp: temp=39.2 sd_pos=753988 sysload=0.73 cputime=183.054 memavail=720540 print_time=2735.129 buffer_time=2.238 print_stall=0 extruder: target=200 temp=200.0 pwm=0.654
Exiting SD card print (position 0)
Stats 2731.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3465858 bytes_read=1168736 bytes_retransmit=9 bytes_invalid=0 send_seq=77638 receive_seq=77638 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996548 heater_bed: target=0 temp=60.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=39.1  sysload=0.73 cputime=183.134 memavail=720300 print_time=2735.129 buffer_time=1.237 print_stall=0 extruder: target=0 temp=199.9 pwm=0.000
Stats 2732.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=3466591 bytes_read=1169120 bytes_retransmit=9 bytes_invalid=0 send_seq=77658 receive_seq=77658 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996545 heater_bed: target=0 temp=60.0 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=39.1  sysload=0.67 cputime=183.197 memavail=720256 print_time=2735.562 buffer_time=0.669 print_stall=0 extruder: target=0 temp=199.9 pwm=0.000
Stats 2733.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000044 bytes_write=3466709 bytes_read=1169468 bytes_retransmit=9 bytes_invalid=0 send_seq=77667 receive_seq=77667 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996543 heater_bed: target=0 temp=59.8 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=39.1  sysload=0.67 cputime=183.259 memavail=719796 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.7 pwm=0.000
Stats 2734.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000044 bytes_write=3466841 bytes_read=1169825 bytes_retransmit=9 bytes_invalid=0 send_seq=77677 receive_seq=77677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996542 heater_bed: target=0 temp=59.7 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.1  sysload=0.67 cputime=183.328 memavail=719872 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.1 pwm=0.000
Stats 2735.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000044 bytes_write=3466975 bytes_read=1170159 bytes_retransmit=9 bytes_invalid=0 send_seq=77687 receive_seq=77687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996541 heater_bed: target=0 temp=59.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.1  sysload=0.67 cputime=183.389 memavail=720376 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.5 pwm=0.000
Stats 2736.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000044 bytes_write=3467384 bytes_read=1170528 bytes_retransmit=9 bytes_invalid=0 send_seq=77701 receive_seq=77701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996539 heater_bed: target=0 temp=59.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.1  sysload=0.67 cputime=183.456 memavail=720876 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.8 pwm=0.000
Stats 2737.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000044 bytes_write=3467517 bytes_read=1170890 bytes_retransmit=9 bytes_invalid=0 send_seq=77711 receive_seq=77711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996537 heater_bed: target=0 temp=59.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.0  sysload=0.62 cputime=183.517 memavail=720636 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.7 pwm=0.000
Stats 2738.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000103 bytes_write=3467660 bytes_read=1171240 bytes_retransmit=9 bytes_invalid=0 send_seq=77721 receive_seq=77721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996536 heater_bed: target=0 temp=59.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=39.0  sysload=0.62 cputime=183.581 memavail=721580 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.6 pwm=0.000
Stats 2739.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000103 bytes_write=3467792 bytes_read=1171589 bytes_retransmit=9 bytes_invalid=0 send_seq=77731 receive_seq=77731 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996533 heater_bed: target=0 temp=59.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=39.2  sysload=0.62 cputime=183.644 memavail=720460 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.6 pwm=0.000
Stats 2740.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000103 bytes_write=3467924 bytes_read=1171951 bytes_retransmit=9 bytes_invalid=0 send_seq=77741 receive_seq=77741 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996532 heater_bed: target=0 temp=59.0 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=39.2  sysload=0.62 cputime=183.706 memavail=720408 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.0 pwm=0.000
Stats 2741.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000020 mcu_task_stddev=0.000103 bytes_write=3468070 bytes_read=1172290 bytes_retransmit=9 bytes_invalid=0 send_seq=77752 receive_seq=77752 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996540 heater_bed: target=0 temp=58.9 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=39.1  sysload=0.62 cputime=183.769 memavail=720220 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.8 pwm=0.000
Stats 2742.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=3468202 bytes_read=1172654 bytes_retransmit=9 bytes_invalid=0 send_seq=77762 receive_seq=77762 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996545 heater_bed: target=0 temp=58.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.8  sysload=0.57 cputime=183.831 memavail=719968 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.6 pwm=0.000
Stats 2743.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=3468334 bytes_read=1173016 bytes_retransmit=9 bytes_invalid=0 send_seq=77772 receive_seq=77772 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996543 heater_bed: target=0 temp=58.6 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=39.2  sysload=0.57 cputime=183.895 memavail=720220 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.8 pwm=0.000
Stats 2744.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=3468482 bytes_read=1173355 bytes_retransmit=9 bytes_invalid=0 send_seq=77783 receive_seq=77783 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996550 heater_bed: target=0 temp=58.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.2  sysload=0.57 cputime=183.955 memavail=720240 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.5 pwm=0.000
Stats 2745.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=3468614 bytes_read=1173704 bytes_retransmit=9 bytes_invalid=0 send_seq=77793 receive_seq=77793 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996547 heater_bed: target=0 temp=58.4 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=39.2  sysload=0.57 cputime=184.016 memavail=720520 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.2 pwm=0.000
Stats 2746.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=3468769 bytes_read=1174071 bytes_retransmit=9 bytes_invalid=0 send_seq=77804 receive_seq=77804 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996543 heater_bed: target=0 temp=58.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.2  sysload=0.57 cputime=184.078 memavail=720724 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.4 pwm=0.000
Stats 2747.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=3468901 bytes_read=1174405 bytes_retransmit=9 bytes_invalid=0 send_seq=77814 receive_seq=77814 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996542 heater_bed: target=0 temp=58.2 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.2  sysload=0.52 cputime=184.139 memavail=720272 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.1 pwm=0.000
Stats 2748.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=3469047 bytes_read=1174788 bytes_retransmit=9 bytes_invalid=0 send_seq=77825 receive_seq=77825 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996540 heater_bed: target=0 temp=58.0 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=39.1  sysload=0.52 cputime=184.202 memavail=719968 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.8 pwm=0.000
Stats 2749.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=3469193 bytes_read=1175141 bytes_retransmit=9 bytes_invalid=0 send_seq=77836 receive_seq=77836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996539 heater_bed: target=0 temp=57.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.0  sysload=0.52 cputime=184.265 memavail=719772 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.9 pwm=0.000
Stats 2750.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=3469325 bytes_read=1175475 bytes_retransmit=9 bytes_invalid=0 send_seq=77846 receive_seq=77846 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996537 heater_bed: target=0 temp=57.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.0  sysload=0.52 cputime=184.325 memavail=719976 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.6 pwm=0.000
Stats 2751.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=3469459 bytes_read=1175838 bytes_retransmit=9 bytes_invalid=0 send_seq=77856 receive_seq=77856 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996534 heater_bed: target=0 temp=57.6 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=39.1  sysload=0.52 cputime=184.387 memavail=719804 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.2 pwm=0.000
Stats 2752.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=3469605 bytes_read=1176191 bytes_retransmit=9 bytes_invalid=0 send_seq=77867 receive_seq=77867 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996532 heater_bed: target=0 temp=57.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=39.2  sysload=0.48 cputime=184.448 memavail=719804 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.3 pwm=0.000
Stats 2753.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=3469737 bytes_read=1176540 bytes_retransmit=9 bytes_invalid=0 send_seq=77877 receive_seq=77877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996530 heater_bed: target=0 temp=57.4 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=39.1  sysload=0.48 cputime=184.508 memavail=719308 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.0 pwm=0.000
Stats 2754.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=3469892 bytes_read=1176908 bytes_retransmit=9 bytes_invalid=0 send_seq=77888 receive_seq=77888 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996530 heater_bed: target=0 temp=57.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=39.2  sysload=0.48 cputime=184.571 memavail=718560 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.6 pwm=0.000
Stats 2755.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=3470038 bytes_read=1177261 bytes_retransmit=9 bytes_invalid=0 send_seq=77899 receive_seq=77899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996529 heater_bed: target=0 temp=57.2 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=39.1  sysload=0.48 cputime=184.633 memavail=718816 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.8 pwm=0.000
Stats 2756.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=3470170 bytes_read=1177595 bytes_retransmit=9 bytes_invalid=0 send_seq=77909 receive_seq=77909 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996527 heater_bed: target=0 temp=57.1 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=39.1  sysload=0.48 cputime=184.693 memavail=718512 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.4 pwm=0.000
Stats 2757.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=3470302 bytes_read=1177958 bytes_retransmit=9 bytes_invalid=0 send_seq=77919 receive_seq=77919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996526 heater_bed: target=0 temp=56.9 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=39.0  sysload=0.44 cputime=184.754 memavail=718304 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.1 pwm=0.000
Stats 2758.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3470450 bytes_read=1178319 bytes_retransmit=9 bytes_invalid=0 send_seq=77930 receive_seq=77930 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996527 heater_bed: target=0 temp=56.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=39.1  sysload=0.44 cputime=184.815 memavail=717968 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.3 pwm=0.000
Stats 2759.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3470596 bytes_read=1178648 bytes_retransmit=9 bytes_invalid=0 send_seq=77941 receive_seq=77941 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996528 heater_bed: target=0 temp=56.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=39.1  sysload=0.44 cputime=184.876 memavail=717716 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.0 pwm=0.000
Stats 2760.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3470728 bytes_read=1179011 bytes_retransmit=9 bytes_invalid=0 send_seq=77951 receive_seq=77951 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996531 heater_bed: target=0 temp=56.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.2  sysload=0.44 cputime=184.938 memavail=717476 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.7 pwm=0.000
Stats 2761.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3470874 bytes_read=1179364 bytes_retransmit=9 bytes_invalid=0 send_seq=77962 receive_seq=77962 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996532 heater_bed: target=0 temp=56.5 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=39.0  sysload=0.44 cputime=185.000 memavail=717676 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.9 pwm=0.000
Stats 2762.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3471015 bytes_read=1179698 bytes_retransmit=9 bytes_invalid=0 send_seq=77972 receive_seq=77972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996539 heater_bed: target=0 temp=56.4 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=39.0  sysload=0.40 cputime=185.062 memavail=717480 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.6 pwm=0.000
Stats 2763.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=3471147 bytes_read=1180076 bytes_retransmit=9 bytes_invalid=0 send_seq=77982 receive_seq=77982 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996539 heater_bed: target=0 temp=56.2 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=39.2  sysload=0.40 cputime=185.124 memavail=717476 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.3 pwm=0.000
Stats 2764.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=3471295 bytes_read=1180429 bytes_retransmit=9 bytes_invalid=0 send_seq=77993 receive_seq=77993 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996540 heater_bed: target=0 temp=56.2 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=39.1  sysload=0.40 cputime=185.187 memavail=717512 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.6 pwm=0.000
Stats 2765.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=3471427 bytes_read=1180763 bytes_retransmit=9 bytes_invalid=0 send_seq=78003 receive_seq=78003 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996539 heater_bed: target=0 temp=56.0 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=39.2  sysload=0.40 cputime=185.249 memavail=717020 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.4 pwm=0.000
Stats 2766.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=3471573 bytes_read=1181131 bytes_retransmit=9 bytes_invalid=0 send_seq=78014 receive_seq=78014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996540 heater_bed: target=0 temp=55.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.1  sysload=0.40 cputime=185.310 memavail=717724 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.1 pwm=0.000
Stats 2767.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=3471705 bytes_read=1181479 bytes_retransmit=9 bytes_invalid=0 send_seq=78024 receive_seq=78024 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996545 heater_bed: target=0 temp=55.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.0  sysload=0.37 cputime=185.370 memavail=717972 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.4 pwm=0.000
Stats 2768.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3471837 bytes_read=1181828 bytes_retransmit=9 bytes_invalid=0 send_seq=78034 receive_seq=78034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=0 temp=55.7 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=39.1  sysload=0.37 cputime=185.430 memavail=717524 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.2 pwm=0.000
Stats 2769.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3471983 bytes_read=1182196 bytes_retransmit=9 bytes_invalid=0 send_seq=78045 receive_seq=78045 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996562 heater_bed: target=0 temp=55.6 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=39.2  sysload=0.37 cputime=185.492 memavail=717324 print_time=2735.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.9 pwm=0.000
Stats 2770.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3472271 bytes_read=1182554 bytes_retransmit=9 bytes_invalid=0 send_seq=78057 receive_seq=78057 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=0 temp=55.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=39.2  sysload=0.37 cputime=185.559 memavail=717332 print_time=2772.865 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.3 pwm=0.000
Stats 2771.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3472419 bytes_read=1182893 bytes_retransmit=9 bytes_invalid=0 send_seq=78068 receive_seq=78068 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=0 temp=55.4 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=39.2  sysload=0.37 cputime=185.620 memavail=717332 print_time=2772.865 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.1 pwm=0.000
Stats 2772.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3472565 bytes_read=1183261 bytes_retransmit=9 bytes_invalid=0 send_seq=78079 receive_seq=78079 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996569 heater_bed: target=0 temp=55.3 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=39.0  sysload=0.34 cputime=185.683 memavail=716528 print_time=2772.865 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.9 pwm=0.000
Stats 2773.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=3472697 bytes_read=1183624 bytes_retransmit=9 bytes_invalid=0 send_seq=78089 receive_seq=78089 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=0 temp=55.2 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=39.1  sysload=0.34 cputime=185.744 memavail=716332 print_time=2772.865 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.4 pwm=0.000
Stats 2774.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=3473152 bytes_read=1183983 bytes_retransmit=9 bytes_invalid=0 send_seq=78104 receive_seq=78104 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996565 heater_bed: target=0 temp=55.1 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=39.2  sysload=0.34 cputime=185.815 memavail=716080 print_time=2778.013 buffer_time=1.084 print_stall=0 extruder: target=0 temp=144.2 pwm=0.000
Stats 2775.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=3473298 bytes_read=1184351 bytes_retransmit=9 bytes_invalid=0 send_seq=78115 receive_seq=78115 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996564 heater_bed: target=0 temp=55.0 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.2  sysload=0.34 cputime=185.878 memavail=716344 print_time=2778.013 buffer_time=0.083 print_stall=0 extruder: target=0 temp=143.1 pwm=0.000
Stats 2776.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=3473430 bytes_read=1184699 bytes_retransmit=9 bytes_invalid=0 send_seq=78125 receive_seq=78125 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996557 heater_bed: target=0 temp=54.9 pwm=0.000 raspberry_pi: temp=45.3 mcu_temp: temp=39.1  sysload=0.34 cputime=185.941 memavail=716344 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.6 pwm=0.000
Stats 2777.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=3473562 bytes_read=1185033 bytes_retransmit=9 bytes_invalid=0 send_seq=78135 receive_seq=78135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996555 heater_bed: target=0 temp=54.8 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=38.9  sysload=0.31 cputime=186.002 memavail=716348 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.5 pwm=0.000
Stats 2778.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3473694 bytes_read=1185411 bytes_retransmit=9 bytes_invalid=0 send_seq=78145 receive_seq=78145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996559 heater_bed: target=0 temp=54.7 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=39.1  sysload=0.31 cputime=186.066 memavail=717140 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.4 pwm=0.000
Stats 2779.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3473842 bytes_read=1185764 bytes_retransmit=9 bytes_invalid=0 send_seq=78156 receive_seq=78156 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=0 temp=54.6 pwm=0.000 raspberry_pi: temp=44.9 mcu_temp: temp=39.0  sysload=0.31 cputime=186.127 memavail=717160 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.0 pwm=0.000
Stats 2780.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3473974 bytes_read=1186098 bytes_retransmit=9 bytes_invalid=0 send_seq=78166 receive_seq=78166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=0 temp=54.6 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=39.0  sysload=0.31 cputime=186.189 memavail=717420 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.9 pwm=0.000
Stats 2781.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3474106 bytes_read=1186461 bytes_retransmit=9 bytes_invalid=0 send_seq=78176 receive_seq=78176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996556 heater_bed: target=0 temp=54.5 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=39.0  sysload=0.31 cputime=186.259 memavail=717672 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.9 pwm=0.000
Stats 2782.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3474252 bytes_read=1186814 bytes_retransmit=9 bytes_invalid=0 send_seq=78187 receive_seq=78187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=0 temp=54.4 pwm=0.000 raspberry_pi: temp=45.0 mcu_temp: temp=38.9  sysload=0.29 cputime=186.321 memavail=717924 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.5 pwm=0.000
Stats 2783.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3474384 bytes_read=1187163 bytes_retransmit=9 bytes_invalid=0 send_seq=78197 receive_seq=78197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996559 heater_bed: target=0 temp=54.3 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=39.0  sysload=0.29 cputime=186.382 memavail=717420 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.5 pwm=0.000
Stats 2784.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3474530 bytes_read=1187520 bytes_retransmit=9 bytes_invalid=0 send_seq=78208 receive_seq=78208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996557 heater_bed: target=0 temp=54.2 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.9  sysload=0.29 cputime=186.444 memavail=717420 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.4 pwm=0.000
Stats 2785.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3474662 bytes_read=1187861 bytes_retransmit=9 bytes_invalid=0 send_seq=78218 receive_seq=78218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996555 heater_bed: target=0 temp=54.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.0  sysload=0.29 cputime=186.508 memavail=716676 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.1 pwm=0.000
Stats 2786.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3474794 bytes_read=1188195 bytes_retransmit=9 bytes_invalid=0 send_seq=78228 receive_seq=78228 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996554 heater_bed: target=0 temp=54.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.8  sysload=0.29 cputime=186.569 memavail=716676 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.1 pwm=0.000
Stats 2787.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3474926 bytes_read=1188558 bytes_retransmit=9 bytes_invalid=0 send_seq=78238 receive_seq=78238 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996552 heater_bed: target=0 temp=54.0 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.9  sysload=0.27 cputime=186.630 memavail=716452 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.0 pwm=0.000
Stats 2788.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3475066 bytes_read=1188924 bytes_retransmit=9 bytes_invalid=0 send_seq=78249 receive_seq=78248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996551 heater_bed: target=0 temp=53.9 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=39.0  sysload=0.27 cputime=186.695 memavail=716732 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.7 pwm=0.000
Stats 2789.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3475198 bytes_read=1189277 bytes_retransmit=9 bytes_invalid=0 send_seq=78259 receive_seq=78259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996553 heater_bed: target=0 temp=53.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.9  sysload=0.27 cputime=186.758 memavail=716484 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.7 pwm=0.000
Stats 2790.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3475344 bytes_read=1189648 bytes_retransmit=9 bytes_invalid=0 send_seq=78270 receive_seq=78270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=0 temp=53.7 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=38.9  sysload=0.27 cputime=186.823 memavail=715476 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.6 pwm=0.000
Stats 2791.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3475476 bytes_read=1190000 bytes_retransmit=9 bytes_invalid=0 send_seq=78280 receive_seq=78280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=0 temp=53.7 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.9  sysload=0.27 cputime=186.888 memavail=715236 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.3 pwm=0.000
Stats 2792.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3475608 bytes_read=1190337 bytes_retransmit=9 bytes_invalid=0 send_seq=78290 receive_seq=78290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=0 temp=53.6 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.9  sysload=0.24 cputime=186.952 memavail=715236 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.3 pwm=0.000
Stats 2793.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3475740 bytes_read=1190718 bytes_retransmit=9 bytes_invalid=0 send_seq=78300 receive_seq=78300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996561 heater_bed: target=0 temp=53.5 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.9  sysload=0.24 cputime=187.018 memavail=715264 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.4 pwm=0.000
Stats 2794.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3475872 bytes_read=1191070 bytes_retransmit=9 bytes_invalid=0 send_seq=78310 receive_seq=78310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996559 heater_bed: target=0 temp=53.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.9  sysload=0.24 cputime=187.084 memavail=715972 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.1 pwm=0.000
Stats 2795.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3476013 bytes_read=1191407 bytes_retransmit=9 bytes_invalid=0 send_seq=78320 receive_seq=78320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996558 heater_bed: target=0 temp=53.4 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.8  sysload=0.24 cputime=187.150 memavail=715720 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.2 pwm=0.000
Stats 2796.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3476145 bytes_read=1191773 bytes_retransmit=9 bytes_invalid=0 send_seq=78330 receive_seq=78330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996557 heater_bed: target=0 temp=53.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.9  sysload=0.24 cputime=187.218 memavail=715980 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.2 pwm=0.000
Stats 2797.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=3476279 bytes_read=1192125 bytes_retransmit=9 bytes_invalid=0 send_seq=78340 receive_seq=78340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=0 temp=53.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.8  sysload=0.22 cputime=187.284 memavail=716180 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.0 pwm=0.000
Stats 2798.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3476411 bytes_read=1192477 bytes_retransmit=9 bytes_invalid=0 send_seq=78350 receive_seq=78350 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996563 heater_bed: target=0 temp=53.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.8  sysload=0.22 cputime=187.349 memavail=715980 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.1 pwm=0.000
Stats 2799.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3476543 bytes_read=1192858 bytes_retransmit=9 bytes_invalid=0 send_seq=78360 receive_seq=78360 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=0 temp=53.2 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=38.9  sysload=0.22 cputime=187.412 memavail=715732 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.9 pwm=0.000
Stats 2800.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3476675 bytes_read=1193195 bytes_retransmit=9 bytes_invalid=0 send_seq=78370 receive_seq=78370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=0 temp=53.1 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.8  sysload=0.22 cputime=187.478 memavail=716500 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.0 pwm=0.000
Stats 2801.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3476807 bytes_read=1193532 bytes_retransmit=9 bytes_invalid=0 send_seq=78380 receive_seq=78380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=0 temp=53.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.8  sysload=0.22 cputime=187.538 memavail=716448 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.1 pwm=0.000
Stats 2802.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3476939 bytes_read=1193913 bytes_retransmit=9 bytes_invalid=0 send_seq=78390 receive_seq=78390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=0 temp=52.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.8  sysload=0.21 cputime=187.597 memavail=716752 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.9 pwm=0.000
Stats 2803.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3477071 bytes_read=1194265 bytes_retransmit=9 bytes_invalid=0 send_seq=78400 receive_seq=78400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=0 temp=52.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.9  sysload=0.21 cputime=187.654 memavail=716828 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.0 pwm=0.000
Stats 2804.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3477203 bytes_read=1194602 bytes_retransmit=9 bytes_invalid=0 send_seq=78410 receive_seq=78410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=0 temp=52.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.8  sysload=0.21 cputime=187.711 memavail=716628 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.2 pwm=0.000
Stats 2805.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3477335 bytes_read=1194983 bytes_retransmit=9 bytes_invalid=0 send_seq=78420 receive_seq=78420 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=0 temp=52.8 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.9  sysload=0.21 cputime=187.769 memavail=716324 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.0 pwm=0.000
Stats 2806.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3477467 bytes_read=1195320 bytes_retransmit=9 bytes_invalid=0 send_seq=78430 receive_seq=78430 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=0 temp=52.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.9  sysload=0.21 cputime=187.826 memavail=716384 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.2 pwm=0.000
Stats 2807.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3477601 bytes_read=1195657 bytes_retransmit=9 bytes_invalid=0 send_seq=78440 receive_seq=78440 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=0 temp=52.7 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.8  sysload=0.19 cputime=187.883 memavail=716344 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.4 pwm=0.000
Stats 2808.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3477733 bytes_read=1196053 bytes_retransmit=9 bytes_invalid=0 send_seq=78450 receive_seq=78450 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=0 temp=52.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.8  sysload=0.19 cputime=187.942 memavail=716164 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.3 pwm=0.000
Stats 2809.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3477865 bytes_read=1196385 bytes_retransmit=9 bytes_invalid=0 send_seq=78460 receive_seq=78460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=0 temp=52.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.9  sysload=0.19 cputime=187.999 memavail=716112 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.5 pwm=0.000
Stats 2810.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3477983 bytes_read=1196721 bytes_retransmit=9 bytes_invalid=0 send_seq=78469 receive_seq=78469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=0 temp=52.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.9  sysload=0.19 cputime=188.061 memavail=715416 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.6 pwm=0.000
Stats 2811.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3478138 bytes_read=1197090 bytes_retransmit=9 bytes_invalid=0 send_seq=78480 receive_seq=78480 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=0 temp=52.4 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.6  sysload=0.19 cputime=188.121 memavail=715192 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.6 pwm=0.000
Stats 2812.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3478256 bytes_read=1197422 bytes_retransmit=9 bytes_invalid=0 send_seq=78489 receive_seq=78489 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=0 temp=52.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.8  sysload=0.17 cputime=188.178 memavail=714940 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.8 pwm=0.000
Stats 2813.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3478388 bytes_read=1197789 bytes_retransmit=9 bytes_invalid=0 send_seq=78499 receive_seq=78499 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=0 temp=52.3 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=38.9  sysload=0.17 cputime=188.235 memavail=714940 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.0 pwm=0.000
Stats 2814.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3478520 bytes_read=1198155 bytes_retransmit=9 bytes_invalid=0 send_seq=78509 receive_seq=78509 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=0 temp=52.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.9  sysload=0.17 cputime=188.293 memavail=715156 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.0 pwm=0.000
Stats 2815.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3478652 bytes_read=1198492 bytes_retransmit=9 bytes_invalid=0 send_seq=78519 receive_seq=78519 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=0 temp=52.2 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.9  sysload=0.17 cputime=188.350 memavail=714912 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.2 pwm=0.000
Stats 2816.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3478784 bytes_read=1198844 bytes_retransmit=9 bytes_invalid=0 send_seq=78529 receive_seq=78529 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=0 temp=52.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=39.0  sysload=0.17 cputime=188.406 memavail=715524 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.5 pwm=0.000
Stats 2817.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3478916 bytes_read=1199210 bytes_retransmit=9 bytes_invalid=0 send_seq=78539 receive_seq=78539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=0 temp=52.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.8  sysload=0.24 cputime=188.461 memavail=715768 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.5 pwm=0.000
Stats 2818.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3479034 bytes_read=1199557 bytes_retransmit=9 bytes_invalid=0 send_seq=78548 receive_seq=78548 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996601 heater_bed: target=0 temp=52.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.8  sysload=0.24 cputime=188.516 memavail=715612 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.7 pwm=0.000
Stats 2819.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3479168 bytes_read=1199909 bytes_retransmit=9 bytes_invalid=0 send_seq=78558 receive_seq=78558 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=0 temp=52.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.9  sysload=0.24 cputime=188.572 memavail=715360 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.0 pwm=0.000
Stats 2820.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3479300 bytes_read=1200275 bytes_retransmit=9 bytes_invalid=0 send_seq=78568 receive_seq=78568 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996595 heater_bed: target=0 temp=51.9 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.8  sysload=0.24 cputime=188.628 memavail=714604 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.0 pwm=0.000
Stats 2821.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3479432 bytes_read=1200612 bytes_retransmit=9 bytes_invalid=0 send_seq=78578 receive_seq=78578 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=0 temp=51.9 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.8  sysload=0.24 cputime=188.686 memavail=715148 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.3 pwm=0.000
Stats 2822.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=3479564 bytes_read=1200964 bytes_retransmit=9 bytes_invalid=0 send_seq=78588 receive_seq=78588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=0 temp=51.8 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.9  sysload=0.30 cputime=188.742 memavail=714844 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.6 pwm=0.000
Stats 2823.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3479696 bytes_read=1201345 bytes_retransmit=9 bytes_invalid=0 send_seq=78598 receive_seq=78598 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=0 temp=51.7 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=39.0  sysload=0.30 cputime=188.799 memavail=715456 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.7 pwm=0.000
Stats 2824.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3479814 bytes_read=1201677 bytes_retransmit=9 bytes_invalid=0 send_seq=78607 receive_seq=78607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=0 temp=51.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.8  sysload=0.30 cputime=188.853 memavail=715204 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.9 pwm=0.000
Stats 2825.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3479946 bytes_read=1202029 bytes_retransmit=9 bytes_invalid=0 send_seq=78617 receive_seq=78617 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=0 temp=51.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.8  sysload=0.30 cputime=188.908 memavail=715460 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.3 pwm=0.000
Stats 2826.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3480078 bytes_read=1202395 bytes_retransmit=9 bytes_invalid=0 send_seq=78627 receive_seq=78627 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=0 temp=51.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.7  sysload=0.30 cputime=188.967 memavail=715168 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.3 pwm=0.000
Stats 2827.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=3480219 bytes_read=1202732 bytes_retransmit=9 bytes_invalid=0 send_seq=78637 receive_seq=78637 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=0 temp=51.4 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.7  sysload=0.36 cputime=189.022 memavail=715220 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.7 pwm=0.000
Stats 2828.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3480337 bytes_read=1203094 bytes_retransmit=9 bytes_invalid=0 send_seq=78646 receive_seq=78646 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=0 temp=51.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.7  sysload=0.36 cputime=189.078 memavail=715476 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.0 pwm=0.000
Stats 2829.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3480469 bytes_read=1203460 bytes_retransmit=9 bytes_invalid=0 send_seq=78656 receive_seq=78656 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996572 heater_bed: target=0 temp=51.3 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.8  sysload=0.36 cputime=189.134 memavail=715536 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.1 pwm=0.000
Stats 2830.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3480601 bytes_read=1203797 bytes_retransmit=9 bytes_invalid=0 send_seq=78666 receive_seq=78666 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=0 temp=51.2 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.7  sysload=0.36 cputime=189.192 memavail=715308 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.4 pwm=0.000
Stats 2831.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3480735 bytes_read=1204149 bytes_retransmit=9 bytes_invalid=0 send_seq=78676 receive_seq=78676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=0 temp=51.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.6  sysload=0.36 cputime=189.251 memavail=715816 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.8 pwm=0.000
Stats 2832.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=3480853 bytes_read=1204510 bytes_retransmit=9 bytes_invalid=0 send_seq=78685 receive_seq=78685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=0 temp=51.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.6  sysload=0.33 cputime=189.308 memavail=715820 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.9 pwm=0.000
Stats 2833.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3480985 bytes_read=1204862 bytes_retransmit=9 bytes_invalid=0 send_seq=78695 receive_seq=78695 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=0 temp=51.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.7  sysload=0.33 cputime=189.363 memavail=715824 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.3 pwm=0.000
Stats 2834.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3481117 bytes_read=1205214 bytes_retransmit=9 bytes_invalid=0 send_seq=78705 receive_seq=78705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=0 temp=50.9 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.6  sysload=0.33 cputime=189.419 memavail=715824 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.7 pwm=0.000
Stats 2835.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3481235 bytes_read=1205566 bytes_retransmit=9 bytes_invalid=0 send_seq=78714 receive_seq=78714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=0 temp=50.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.5  sysload=0.33 cputime=189.476 memavail=715600 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.8 pwm=0.000
Stats 2836.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3481367 bytes_read=1205896 bytes_retransmit=9 bytes_invalid=0 send_seq=78724 receive_seq=78724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=0 temp=50.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.8  sysload=0.33 cputime=189.534 memavail=716112 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.2 pwm=0.000
Stats 2837.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3481499 bytes_read=1206248 bytes_retransmit=9 bytes_invalid=0 send_seq=78734 receive_seq=78734 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=0 temp=50.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.6  sysload=0.30 cputime=189.590 memavail=716564 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.6 pwm=0.000
Stats 2838.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3481631 bytes_read=1206629 bytes_retransmit=9 bytes_invalid=0 send_seq=78744 receive_seq=78744 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=0 temp=50.7 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.6  sysload=0.30 cputime=189.649 memavail=717148 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.8 pwm=0.000
Stats 2839.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3481749 bytes_read=1206961 bytes_retransmit=9 bytes_invalid=0 send_seq=78753 receive_seq=78753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=0 temp=50.6 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.6  sysload=0.30 cputime=189.703 memavail=716644 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.2 pwm=0.000
Stats 2840.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3481881 bytes_read=1207313 bytes_retransmit=9 bytes_invalid=0 send_seq=78763 receive_seq=78763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996579 heater_bed: target=0 temp=50.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.6  sysload=0.30 cputime=189.760 memavail=716896 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.6 pwm=0.000
Stats 2841.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3482013 bytes_read=1207679 bytes_retransmit=9 bytes_invalid=0 send_seq=78773 receive_seq=78773 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=0 temp=50.5 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.5  sysload=0.30 cputime=189.815 memavail=717096 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.8 pwm=0.000
Stats 2842.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3482145 bytes_read=1208016 bytes_retransmit=9 bytes_invalid=0 send_seq=78783 receive_seq=78783 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=0 temp=50.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=38.4  sysload=0.28 cputime=189.870 memavail=716912 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.3 pwm=0.000
Stats 2843.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3482277 bytes_read=1208383 bytes_retransmit=9 bytes_invalid=0 send_seq=78793 receive_seq=78793 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=0 temp=50.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=38.6  sysload=0.28 cputime=189.925 memavail=717164 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.7 pwm=0.000
Stats 2844.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3482395 bytes_read=1208744 bytes_retransmit=9 bytes_invalid=0 send_seq=78802 receive_seq=78802 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=0 temp=50.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.7  sysload=0.28 cputime=189.979 memavail=717164 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.0 pwm=0.000
Stats 2845.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3482527 bytes_read=1209081 bytes_retransmit=9 bytes_invalid=0 send_seq=78812 receive_seq=78812 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=0 temp=50.3 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=38.6  sysload=0.28 cputime=190.032 memavail=717164 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.4 pwm=0.000
Stats 2846.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3482661 bytes_read=1209433 bytes_retransmit=9 bytes_invalid=0 send_seq=78822 receive_seq=78822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=0 temp=50.1 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=38.8  sysload=0.28 cputime=190.086 memavail=716608 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.8 pwm=0.000
Stats 2847.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3482779 bytes_read=1209794 bytes_retransmit=9 bytes_invalid=0 send_seq=78831 receive_seq=78831 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=0 temp=50.1 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.8  sysload=0.26 cputime=190.140 memavail=716448 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.1 pwm=0.000
Stats 2848.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3482911 bytes_read=1210146 bytes_retransmit=9 bytes_invalid=0 send_seq=78841 receive_seq=78841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=0 temp=50.1 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=38.7  sysload=0.26 cputime=190.193 memavail=717584 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.6 pwm=0.000
Stats 2849.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3483049 bytes_read=1210514 bytes_retransmit=9 bytes_invalid=0 send_seq=78852 receive_seq=78852 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996637 heater_bed: target=0 temp=50.0 pwm=0.000 raspberry_pi: temp=44.3 mcu_temp: temp=38.7  sysload=0.26 cputime=190.248 memavail=717616 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.0 pwm=0.000
Stats 2850.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3483167 bytes_read=1210875 bytes_retransmit=9 bytes_invalid=0 send_seq=78861 receive_seq=78861 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996631 heater_bed: target=0 temp=49.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.6  sysload=0.26 cputime=190.302 memavail=717616 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.3 pwm=0.000
Stats 2851.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3483299 bytes_read=1211212 bytes_retransmit=9 bytes_invalid=0 send_seq=78871 receive_seq=78871 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996627 heater_bed: target=0 temp=49.8 pwm=0.000 raspberry_pi: temp=44.4 mcu_temp: temp=38.6  sysload=0.26 cputime=190.356 memavail=717120 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.8 pwm=0.000
Stats 2852.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3483417 bytes_read=1211559 bytes_retransmit=9 bytes_invalid=0 send_seq=78880 receive_seq=78880 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996623 heater_bed: target=0 temp=49.8 pwm=0.000 raspberry_pi: temp=44.6 mcu_temp: temp=38.5  sysload=0.23 cputime=190.409 memavail=717120 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.3 pwm=0.000
Stats 2853.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3483549 bytes_read=1211940 bytes_retransmit=9 bytes_invalid=0 send_seq=78890 receive_seq=78890 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996618 heater_bed: target=0 temp=49.7 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=38.5  sysload=0.23 cputime=190.464 memavail=716644 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.6 pwm=0.000
Stats 2854.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3483667 bytes_read=1212272 bytes_retransmit=9 bytes_invalid=0 send_seq=78899 receive_seq=78899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996615 heater_bed: target=0 temp=49.7 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.6  sysload=0.23 cputime=190.517 memavail=716392 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.1 pwm=0.000
Stats 2855.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3483799 bytes_read=1212624 bytes_retransmit=9 bytes_invalid=0 send_seq=78909 receive_seq=78909 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=0 temp=49.6 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.6  sysload=0.23 cputime=190.571 memavail=716808 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.6 pwm=0.000
Stats 2856.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3483931 bytes_read=1212990 bytes_retransmit=9 bytes_invalid=0 send_seq=78919 receive_seq=78919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=0 temp=49.5 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.5  sysload=0.23 cputime=190.626 memavail=715896 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.9 pwm=0.000
Stats 2857.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3484049 bytes_read=1213322 bytes_retransmit=9 bytes_invalid=0 send_seq=78928 receive_seq=78928 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=0 temp=49.5 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.5  sysload=0.22 cputime=190.680 memavail=715868 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.4 pwm=0.000
Stats 2858.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3484192 bytes_read=1213689 bytes_retransmit=9 bytes_invalid=0 send_seq=78938 receive_seq=78938 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=0 temp=49.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.5  sysload=0.22 cputime=190.735 memavail=716440 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.9 pwm=0.000
Stats 2859.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3484310 bytes_read=1214050 bytes_retransmit=9 bytes_invalid=0 send_seq=78947 receive_seq=78947 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=0 temp=49.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.6  sysload=0.22 cputime=190.789 memavail=716180 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.3 pwm=0.000
Stats 2860.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3484442 bytes_read=1214384 bytes_retransmit=9 bytes_invalid=0 send_seq=78957 receive_seq=78957 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 heater_bed: target=0 temp=49.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.7  sysload=0.22 cputime=190.842 memavail=716496 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.8 pwm=0.000
Stats 2861.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3484560 bytes_read=1214720 bytes_retransmit=9 bytes_invalid=0 send_seq=78966 receive_seq=78966 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=0 temp=49.3 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.4  sysload=0.22 cputime=190.895 memavail=716496 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.3 pwm=0.000
Stats 2862.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3484692 bytes_read=1215084 bytes_retransmit=9 bytes_invalid=0 send_seq=78976 receive_seq=78976 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=0 temp=49.2 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.4  sysload=0.20 cputime=190.951 memavail=716756 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.7 pwm=0.000
Stats 2863.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3484810 bytes_read=1215431 bytes_retransmit=9 bytes_invalid=0 send_seq=78985 receive_seq=78985 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996590 heater_bed: target=0 temp=49.1 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.5  sysload=0.20 cputime=191.004 memavail=716508 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.2 pwm=0.000
Stats 2864.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3484944 bytes_read=1215797 bytes_retransmit=9 bytes_invalid=0 send_seq=78995 receive_seq=78995 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=0 temp=49.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.5  sysload=0.20 cputime=191.060 memavail=716512 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.7 pwm=0.000
Stats 2865.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3485062 bytes_read=1216144 bytes_retransmit=9 bytes_invalid=0 send_seq=79004 receive_seq=79004 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996585 heater_bed: target=0 temp=49.0 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=38.5  sysload=0.20 cputime=191.113 memavail=716544 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.1 pwm=0.000
Stats 2866.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3485194 bytes_read=1216481 bytes_retransmit=9 bytes_invalid=0 send_seq=79014 receive_seq=79014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996583 heater_bed: target=0 temp=48.9 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.5  sysload=0.20 cputime=191.167 memavail=716744 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.7 pwm=0.000
Stats 2867.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=3485312 bytes_read=1216842 bytes_retransmit=9 bytes_invalid=0 send_seq=79023 receive_seq=79023 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=0 temp=48.9 pwm=0.000 raspberry_pi: temp=43.4 mcu_temp: temp=38.4  sysload=0.18 cputime=191.221 memavail=717056 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.2 pwm=0.000
Stats 2868.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3485444 bytes_read=1217209 bytes_retransmit=9 bytes_invalid=0 send_seq=79033 receive_seq=79033 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996581 heater_bed: target=0 temp=48.8 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.4  sysload=0.18 cputime=191.276 memavail=717060 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000
Stats 2869.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3485562 bytes_read=1217541 bytes_retransmit=9 bytes_invalid=0 send_seq=79042 receive_seq=79042 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=0 temp=48.8 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.5  sysload=0.18 cputime=191.329 memavail=717336 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.2 pwm=0.000
Stats 2870.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3485694 bytes_read=1217907 bytes_retransmit=9 bytes_invalid=0 send_seq=79052 receive_seq=79052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=0 temp=48.7 pwm=0.000 raspberry_pi: temp=43.3 mcu_temp: temp=38.5  sysload=0.18 cputime=191.386 memavail=717536 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.8 pwm=0.000
Stats 2871.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3485812 bytes_read=1218254 bytes_retransmit=9 bytes_invalid=0 send_seq=79061 receive_seq=79061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996578 heater_bed: target=0 temp=48.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.5  sysload=0.18 cputime=191.440 memavail=717124 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.2 pwm=0.000
Stats 2872.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3485944 bytes_read=1218591 bytes_retransmit=9 bytes_invalid=0 send_seq=79071 receive_seq=79071 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996577 heater_bed: target=0 temp=48.6 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.4  sysload=0.17 cputime=191.496 memavail=716820 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.8 pwm=0.000
Stats 2873.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3486062 bytes_read=1218967 bytes_retransmit=9 bytes_invalid=0 send_seq=79080 receive_seq=79080 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996576 heater_bed: target=0 temp=48.5 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.3  sysload=0.17 cputime=191.550 memavail=717136 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000
Stats 2874.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3486194 bytes_read=1219319 bytes_retransmit=9 bytes_invalid=0 send_seq=79090 receive_seq=79090 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996574 heater_bed: target=0 temp=48.4 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.6  sysload=0.17 cputime=191.603 memavail=717336 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000
Stats 2875.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3486326 bytes_read=1219656 bytes_retransmit=9 bytes_invalid=0 send_seq=79100 receive_seq=79100 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996573 heater_bed: target=0 temp=48.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.5  sysload=0.17 cputime=191.658 memavail=717136 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.4 pwm=0.000
Stats 2876.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3486458 bytes_read=1220022 bytes_retransmit=9 bytes_invalid=0 send_seq=79110 receive_seq=79110 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996571 heater_bed: target=0 temp=48.3 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.3  sysload=0.17 cputime=191.712 memavail=717388 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.0 pwm=0.000
Stats 2877.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3486576 bytes_read=1220369 bytes_retransmit=9 bytes_invalid=0 send_seq=79119 receive_seq=79119 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=0 temp=48.3 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.4  sysload=0.15 cputime=191.767 memavail=716924 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.5 pwm=0.000
Stats 2878.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3486708 bytes_read=1220721 bytes_retransmit=9 bytes_invalid=0 send_seq=79129 receive_seq=79129 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996570 heater_bed: target=0 temp=48.2 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.4  sysload=0.15 cputime=191.821 memavail=716924 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.0 pwm=0.000
Stats 2879.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3486826 bytes_read=1221082 bytes_retransmit=9 bytes_invalid=0 send_seq=79138 receive_seq=79138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996567 heater_bed: target=0 temp=48.1 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.5  sysload=0.15 cputime=191.875 memavail=716928 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000
Stats 2880.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3486944 bytes_read=1221429 bytes_retransmit=9 bytes_invalid=0 send_seq=79147 receive_seq=79147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996661 heater_bed: target=0 temp=48.1 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.4  sysload=0.15 cputime=191.929 memavail=716676 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000
Stats 2881.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3487076 bytes_read=1221766 bytes_retransmit=9 bytes_invalid=0 send_seq=79157 receive_seq=79157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996654 heater_bed: target=0 temp=48.0 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.5  sysload=0.15 cputime=191.983 memavail=716676 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000
Stats 2882.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3487194 bytes_read=1222127 bytes_retransmit=9 bytes_invalid=0 send_seq=79166 receive_seq=79166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996648 heater_bed: target=0 temp=47.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.2  sysload=0.30 cputime=192.037 memavail=716628 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.4 pwm=0.000
Stats 2883.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3487326 bytes_read=1222494 bytes_retransmit=9 bytes_invalid=0 send_seq=79176 receive_seq=79176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996644 heater_bed: target=0 temp=47.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.3  sysload=0.30 cputime=192.091 memavail=716688 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000
Stats 2884.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3487444 bytes_read=1222826 bytes_retransmit=9 bytes_invalid=0 send_seq=79185 receive_seq=79185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996639 heater_bed: target=0 temp=47.8 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.3  sysload=0.30 cputime=192.144 memavail=716888 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000
Stats 2885.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3487578 bytes_read=1223192 bytes_retransmit=9 bytes_invalid=0 send_seq=79195 receive_seq=79195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996634 heater_bed: target=0 temp=47.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.5  sysload=0.30 cputime=192.199 memavail=716940 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
Stats 2886.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3487696 bytes_read=1223530 bytes_retransmit=9 bytes_invalid=0 send_seq=79204 receive_seq=79204 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996627 heater_bed: target=0 temp=47.7 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.3  sysload=0.30 cputime=192.254 memavail=716940 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000
Stats 2887.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3487814 bytes_read=1223854 bytes_retransmit=9 bytes_invalid=0 send_seq=79213 receive_seq=79213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996621 heater_bed: target=0 temp=47.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.4  sysload=0.28 cputime=192.307 memavail=716692 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000
Stats 2888.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3487946 bytes_read=1224235 bytes_retransmit=9 bytes_invalid=0 send_seq=79223 receive_seq=79223 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996616 heater_bed: target=0 temp=47.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.4  sysload=0.28 cputime=192.363 memavail=716700 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000
Stats 2889.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3488064 bytes_read=1224582 bytes_retransmit=9 bytes_invalid=0 send_seq=79232 receive_seq=79232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=0 temp=47.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.3  sysload=0.28 cputime=192.416 memavail=717196 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
Stats 2890.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3488196 bytes_read=1224919 bytes_retransmit=9 bytes_invalid=0 send_seq=79242 receive_seq=79242 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=0 temp=47.4 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.5  sysload=0.28 cputime=192.470 memavail=717264 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000
Stats 2891.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3488328 bytes_read=1225285 bytes_retransmit=9 bytes_invalid=0 send_seq=79252 receive_seq=79252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=0 temp=47.4 pwm=0.000 raspberry_pi: temp=43.9 mcu_temp: temp=38.2  sysload=0.28 cputime=192.525 memavail=717264 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000
Stats 2892.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=3488446 bytes_read=1225632 bytes_retransmit=9 bytes_invalid=0 send_seq=79261 receive_seq=79261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996598 heater_bed: target=0 temp=47.3 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.3  sysload=0.25 cputime=192.582 memavail=717212 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000
Stats 2893.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3488578 bytes_read=1225984 bytes_retransmit=9 bytes_invalid=0 send_seq=79271 receive_seq=79271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996594 heater_bed: target=0 temp=47.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.3  sysload=0.25 cputime=192.636 memavail=717524 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000
Stats 2894.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3488696 bytes_read=1226345 bytes_retransmit=9 bytes_invalid=0 send_seq=79280 receive_seq=79280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996592 heater_bed: target=0 temp=47.2 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.3  sysload=0.25 cputime=192.690 memavail=717524 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000
Stats 2895.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3488814 bytes_read=1226692 bytes_retransmit=9 bytes_invalid=0 send_seq=79289 receive_seq=79289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=0 temp=47.2 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.2  sysload=0.25 cputime=192.745 memavail=718196 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000
Stats 2896.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3488946 bytes_read=1227029 bytes_retransmit=9 bytes_invalid=0 send_seq=79299 receive_seq=79299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=0 temp=47.1 pwm=0.000 raspberry_pi: temp=43.7 mcu_temp: temp=38.3  sysload=0.25 cputime=192.800 memavail=718472 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000
Stats 2897.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3489064 bytes_read=1227390 bytes_retransmit=9 bytes_invalid=0 send_seq=79308 receive_seq=79308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=0 temp=47.0 pwm=0.000 raspberry_pi: temp=43.8 mcu_temp: temp=38.4  sysload=0.23 cputime=192.855 memavail=717968 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 2898.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3489196 bytes_read=1227757 bytes_retransmit=9 bytes_invalid=0 send_seq=79318 receive_seq=79318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996589 heater_bed: target=0 temp=47.0 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.4  sysload=0.23 cputime=192.912 memavail=718228 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 2899.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3489314 bytes_read=1228089 bytes_retransmit=9 bytes_invalid=0 send_seq=79327 receive_seq=79327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=0 temp=46.9 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.3  sysload=0.23 cputime=192.967 memavail=718228 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 2900.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3489432 bytes_read=1228450 bytes_retransmit=9 bytes_invalid=0 send_seq=79336 receive_seq=79336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=0 temp=46.9 pwm=0.000 raspberry_pi: temp=43.2 mcu_temp: temp=38.2  sysload=0.23 cputime=193.025 memavail=718984 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 2901.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3489564 bytes_read=1228802 bytes_retransmit=9 bytes_invalid=0 send_seq=79346 receive_seq=79346 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996582 heater_bed: target=0 temp=46.8 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.3  sysload=0.23 cputime=193.083 memavail=718764 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000
Stats 2902.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3489682 bytes_read=1229134 bytes_retransmit=9 bytes_invalid=0 send_seq=79355 receive_seq=79355 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=0 temp=46.8 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.2  sysload=0.22 cputime=193.141 memavail=719520 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000
Stats 2903.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3489800 bytes_read=1229510 bytes_retransmit=9 bytes_invalid=0 send_seq=79364 receive_seq=79364 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996580 heater_bed: target=0 temp=46.7 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=38.3  sysload=0.22 cputime=193.200 memavail=719028 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000
Stats 2904.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3489932 bytes_read=1229862 bytes_retransmit=9 bytes_invalid=0 send_seq=79374 receive_seq=79374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996587 heater_bed: target=0 temp=46.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.1  sysload=0.22 cputime=193.261 memavail=719028 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 2905.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3490050 bytes_read=1230194 bytes_retransmit=9 bytes_invalid=0 send_seq=79383 receive_seq=79383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996586 heater_bed: target=0 temp=46.6 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.3  sysload=0.22 cputime=193.319 memavail=719280 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 2906.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3490168 bytes_read=1230555 bytes_retransmit=9 bytes_invalid=0 send_seq=79392 receive_seq=79392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996588 heater_bed: target=0 temp=46.5 pwm=0.000 raspberry_pi: temp=44.1 mcu_temp: temp=38.1  sysload=0.22 cputime=193.377 memavail=719280 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
Stats 2907.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3490314 bytes_read=1230912 bytes_retransmit=9 bytes_invalid=0 send_seq=79403 receive_seq=79403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996593 heater_bed: target=0 temp=46.5 pwm=0.000 raspberry_pi: temp=43.6 mcu_temp: temp=38.2  sysload=0.28 cputime=193.435 memavail=719280 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 2908.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3490432 bytes_read=1231259 bytes_retransmit=9 bytes_invalid=0 send_seq=79412 receive_seq=79412 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996605 heater_bed: target=0 temp=46.4 pwm=0.000 raspberry_pi: temp=44.2 mcu_temp: temp=38.3  sysload=0.28 cputime=193.489 memavail=719120 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000
Stats 2909.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3490550 bytes_read=1231620 bytes_retransmit=9 bytes_invalid=0 send_seq=79421 receive_seq=79421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=0 temp=46.4 pwm=0.000 raspberry_pi: temp=44.5 mcu_temp: temp=38.1  sysload=0.28 cputime=193.551 memavail=718896 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 2910.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=3490682 bytes_read=1231972 bytes_retransmit=9 bytes_invalid=0 send_seq=79431 receive_seq=79431 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996602 heater_bed: target=0 temp=46.3 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=38.3  sysload=0.28 cputime=193.607 memavail=718896 print_time=2778.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000
Stats 3376.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=3546227 bytes_read=1394633 bytes_retransmit=9 bytes_invalid=0 send_seq=83667 receive_seq=83667 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996687 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=42.0 mcu_temp: temp=35.4  sysload=0.58 cputime=220.210 memavail=717160 print_time=3378.954 buffer_time=0.160 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 3377.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000004 bytes_write=3546233 bytes_read=1394810 bytes_retransmit=9 bytes_invalid=0 send_seq=83668 receive_seq=83668 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996686 heater_bed: target=0 temp=33.7 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=35.4  sysload=0.58 cputime=220.247 memavail=717108 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 3378.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=3546239 bytes_read=1394973 bytes_retransmit=9 bytes_invalid=0 send_seq=83669 receive_seq=83669 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996685 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=35.4  sysload=0.53 cputime=220.284 memavail=716664 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3379.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=3546251 bytes_read=1395136 bytes_retransmit=9 bytes_invalid=0 send_seq=83671 receive_seq=83670 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996686 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=35.5  sysload=0.53 cputime=220.319 memavail=716664 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3380.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=3546257 bytes_read=1395329 bytes_retransmit=9 bytes_invalid=0 send_seq=83672 receive_seq=83672 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996690 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=35.2  sysload=0.53 cputime=220.356 memavail=716864 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 3381.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=3546263 bytes_read=1395477 bytes_retransmit=9 bytes_invalid=0 send_seq=83673 receive_seq=83673 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996689 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=35.4  sysload=0.53 cputime=220.391 memavail=717168 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3382.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=3546269 bytes_read=1395654 bytes_retransmit=9 bytes_invalid=0 send_seq=83674 receive_seq=83674 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996690 heater_bed: target=0 temp=33.6 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=35.3  sysload=0.53 cputime=220.427 memavail=717420 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3383.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546275 bytes_read=1395831 bytes_retransmit=9 bytes_invalid=0 send_seq=83675 receive_seq=83675 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996689 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=35.4  sysload=0.49 cputime=220.463 memavail=717168 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3384.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546281 bytes_read=1395979 bytes_retransmit=9 bytes_invalid=0 send_seq=83676 receive_seq=83676 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996689 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=35.4  sysload=0.49 cputime=220.497 memavail=717684 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3385.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546287 bytes_read=1396156 bytes_retransmit=9 bytes_invalid=0 send_seq=83677 receive_seq=83677 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996689 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=35.3  sysload=0.49 cputime=220.532 memavail=717684 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3386.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546293 bytes_read=1396319 bytes_retransmit=9 bytes_invalid=0 send_seq=83678 receive_seq=83678 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996691 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=35.4  sysload=0.49 cputime=220.568 memavail=717984 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3387.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546308 bytes_read=1396467 bytes_retransmit=9 bytes_invalid=0 send_seq=83680 receive_seq=83679 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=167996691 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=40.9 mcu_temp: temp=35.3  sysload=0.49 cputime=220.603 memavail=717560 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3388.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=3546324 bytes_read=1396668 bytes_retransmit=9 bytes_invalid=0 send_seq=83682 receive_seq=83682 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996696 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=35.4  sysload=0.45 cputime=220.641 memavail=717008 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3389.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=3546330 bytes_read=1396831 bytes_retransmit=9 bytes_invalid=0 send_seq=83683 receive_seq=83683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996697 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=35.2  sysload=0.45 cputime=220.676 memavail=717068 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3390.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=3546336 bytes_read=1396979 bytes_retransmit=9 bytes_invalid=0 send_seq=83684 receive_seq=83684 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.5 pwm=0.000 raspberry_pi: temp=40.7 mcu_temp: temp=35.2  sysload=0.45 cputime=220.711 memavail=717068 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3391.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=3546342 bytes_read=1397156 bytes_retransmit=9 bytes_invalid=0 send_seq=83685 receive_seq=83685 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996696 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=40.9 mcu_temp: temp=35.3  sysload=0.45 cputime=220.747 memavail=717072 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3392.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=3546348 bytes_read=1397319 bytes_retransmit=9 bytes_invalid=0 send_seq=83686 receive_seq=83686 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996697 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=35.3  sysload=0.45 cputime=220.783 memavail=717020 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3393.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=3546354 bytes_read=1397467 bytes_retransmit=9 bytes_invalid=0 send_seq=83687 receive_seq=83687 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=40.9 mcu_temp: temp=35.3  sysload=0.41 cputime=220.819 memavail=717076 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3394.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546360 bytes_read=1397673 bytes_retransmit=9 bytes_invalid=0 send_seq=83688 receive_seq=83688 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996696 heater_bed: target=0 temp=33.4 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=35.2  sysload=0.41 cputime=220.856 memavail=717076 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 3395.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546366 bytes_read=1397821 bytes_retransmit=9 bytes_invalid=0 send_seq=83689 receive_seq=83689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996696 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=35.2  sysload=0.41 cputime=220.892 memavail=716832 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3396.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546372 bytes_read=1397984 bytes_retransmit=9 bytes_invalid=0 send_seq=83690 receive_seq=83690 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996696 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=35.1  sysload=0.41 cputime=220.928 memavail=716832 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3397.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546378 bytes_read=1398156 bytes_retransmit=9 bytes_invalid=0 send_seq=83691 receive_seq=83691 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=35.4  sysload=0.41 cputime=220.964 memavail=717248 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3398.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546384 bytes_read=1398294 bytes_retransmit=9 bytes_invalid=0 send_seq=83692 receive_seq=83692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=40.4 mcu_temp: temp=35.2  sysload=0.46 cputime=220.999 memavail=717348 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3399.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546390 bytes_read=1398468 bytes_retransmit=9 bytes_invalid=0 send_seq=83693 receive_seq=83693 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=35.2  sysload=0.46 cputime=221.038 memavail=716620 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3400.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546396 bytes_read=1398645 bytes_retransmit=9 bytes_invalid=0 send_seq=83694 receive_seq=83694 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.3 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=35.2  sysload=0.46 cputime=221.074 memavail=716624 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3401.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546402 bytes_read=1398793 bytes_retransmit=9 bytes_invalid=0 send_seq=83695 receive_seq=83695 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=35.0  sysload=0.46 cputime=221.109 memavail=716628 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3402.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546408 bytes_read=1398956 bytes_retransmit=9 bytes_invalid=0 send_seq=83696 receive_seq=83696 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=35.1  sysload=0.46 cputime=221.145 memavail=716828 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3403.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546414 bytes_read=1399133 bytes_retransmit=9 bytes_invalid=0 send_seq=83697 receive_seq=83697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996696 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=40.6 mcu_temp: temp=35.0  sysload=0.42 cputime=221.180 memavail=716628 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3404.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546420 bytes_read=1399295 bytes_retransmit=9 bytes_invalid=0 send_seq=83698 receive_seq=83698 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=35.2  sysload=0.42 cputime=221.217 memavail=716640 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3405.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546426 bytes_read=1399458 bytes_retransmit=9 bytes_invalid=0 send_seq=83699 receive_seq=83699 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996698 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=35.0  sysload=0.42 cputime=221.253 memavail=716640 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3406.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546432 bytes_read=1399635 bytes_retransmit=9 bytes_invalid=0 send_seq=83700 receive_seq=83700 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996700 heater_bed: target=0 temp=33.2 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=35.0  sysload=0.42 cputime=221.289 memavail=716640 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3407.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546438 bytes_read=1399783 bytes_retransmit=9 bytes_invalid=0 send_seq=83701 receive_seq=83701 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996711 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=35.1  sysload=0.42 cputime=221.324 memavail=716640 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3408.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546444 bytes_read=1399960 bytes_retransmit=9 bytes_invalid=0 send_seq=83702 receive_seq=83702 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996711 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=34.8  sysload=0.39 cputime=221.360 memavail=716840 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 3409.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546450 bytes_read=1400137 bytes_retransmit=9 bytes_invalid=0 send_seq=83703 receive_seq=83703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996711 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=35.1  sysload=0.39 cputime=221.396 memavail=716900 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3410.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546456 bytes_read=1400285 bytes_retransmit=9 bytes_invalid=0 send_seq=83704 receive_seq=83704 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996711 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=35.0  sysload=0.39 cputime=221.431 memavail=716852 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3411.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546462 bytes_read=1400462 bytes_retransmit=9 bytes_invalid=0 send_seq=83705 receive_seq=83705 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996708 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=34.8  sysload=0.39 cputime=221.467 memavail=716908 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3412.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546468 bytes_read=1400625 bytes_retransmit=9 bytes_invalid=0 send_seq=83706 receive_seq=83706 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996708 heater_bed: target=0 temp=33.1 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=35.0  sysload=0.39 cputime=221.502 memavail=717108 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3413.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546474 bytes_read=1400773 bytes_retransmit=9 bytes_invalid=0 send_seq=83707 receive_seq=83707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996709 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=35.0  sysload=0.36 cputime=221.539 memavail=717160 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3414.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546480 bytes_read=1400964 bytes_retransmit=9 bytes_invalid=0 send_seq=83708 receive_seq=83708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996709 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=34.9  sysload=0.36 cputime=221.575 memavail=717168 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3415.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546486 bytes_read=1401127 bytes_retransmit=9 bytes_invalid=0 send_seq=83709 receive_seq=83709 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996707 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=34.8  sysload=0.36 cputime=221.610 memavail=717168 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3416.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546492 bytes_read=1401275 bytes_retransmit=9 bytes_invalid=0 send_seq=83710 receive_seq=83710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996707 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=34.8  sysload=0.36 cputime=221.645 memavail=717172 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3417.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546498 bytes_read=1401452 bytes_retransmit=9 bytes_invalid=0 send_seq=83711 receive_seq=83711 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996706 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=35.0  sysload=0.36 cputime=221.681 memavail=717172 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3418.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546504 bytes_read=1401615 bytes_retransmit=9 bytes_invalid=0 send_seq=83712 receive_seq=83712 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996705 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=34.8  sysload=0.41 cputime=221.717 memavail=717172 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3419.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546510 bytes_read=1401777 bytes_retransmit=9 bytes_invalid=0 send_seq=83713 receive_seq=83713 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996707 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=35.0  sysload=0.41 cputime=221.753 memavail=716928 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3420.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546516 bytes_read=1401954 bytes_retransmit=9 bytes_invalid=0 send_seq=83714 receive_seq=83714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996708 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=34.7  sysload=0.41 cputime=221.790 memavail=716676 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3421.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546522 bytes_read=1402117 bytes_retransmit=9 bytes_invalid=0 send_seq=83715 receive_seq=83715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996706 heater_bed: target=0 temp=32.9 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=34.8  sysload=0.41 cputime=221.825 memavail=716676 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3422.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546528 bytes_read=1402265 bytes_retransmit=9 bytes_invalid=0 send_seq=83716 receive_seq=83716 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996705 heater_bed: target=0 temp=33.0 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=34.7  sysload=0.41 cputime=221.860 memavail=716424 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 3423.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546534 bytes_read=1402448 bytes_retransmit=9 bytes_invalid=0 send_seq=83717 receive_seq=83717 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996703 heater_bed: target=0 temp=32.9 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=34.8  sysload=0.38 cputime=221.897 memavail=716428 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3424.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546540 bytes_read=1402603 bytes_retransmit=9 bytes_invalid=0 send_seq=83718 receive_seq=83718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996704 heater_bed: target=0 temp=32.9 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=34.8  sysload=0.38 cputime=221.932 memavail=716436 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3425.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546546 bytes_read=1402766 bytes_retransmit=9 bytes_invalid=0 send_seq=83719 receive_seq=83719 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996703 heater_bed: target=0 temp=32.8 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=34.8  sysload=0.38 cputime=221.968 memavail=716436 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3426.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546552 bytes_read=1402943 bytes_retransmit=9 bytes_invalid=0 send_seq=83720 receive_seq=83720 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996712 heater_bed: target=0 temp=32.8 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=34.8  sysload=0.38 cputime=222.003 memavail=716556 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 3427.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546558 bytes_read=1403091 bytes_retransmit=9 bytes_invalid=0 send_seq=83721 receive_seq=83721 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996712 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=34.7  sysload=0.38 cputime=222.038 memavail=716312 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 3428.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546564 bytes_read=1403254 bytes_retransmit=9 bytes_invalid=0 send_seq=83722 receive_seq=83722 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996711 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=34.7  sysload=0.35 cputime=222.073 memavail=716312 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 3429.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546570 bytes_read=1403445 bytes_retransmit=9 bytes_invalid=0 send_seq=83723 receive_seq=83723 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996711 heater_bed: target=0 temp=32.8 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=34.6  sysload=0.35 cputime=222.109 memavail=715808 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 3430.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546576 bytes_read=1403593 bytes_retransmit=9 bytes_invalid=0 send_seq=83724 receive_seq=83724 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996710 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=34.8  sysload=0.35 cputime=222.143 memavail=715816 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3431.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546582 bytes_read=1403756 bytes_retransmit=9 bytes_invalid=0 send_seq=83725 receive_seq=83725 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996710 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=40.9 mcu_temp: temp=34.4  sysload=0.35 cputime=222.178 memavail=716348 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 3432.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546594 bytes_read=1403949 bytes_retransmit=9 bytes_invalid=0 send_seq=83727 receive_seq=83727 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996710 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=34.6  sysload=0.35 cputime=222.215 memavail=716604 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 3433.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546600 bytes_read=1404097 bytes_retransmit=9 bytes_invalid=0 send_seq=83728 receive_seq=83728 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996708 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=34.6  sysload=0.40 cputime=222.249 memavail=716604 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 3434.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546606 bytes_read=1404274 bytes_retransmit=9 bytes_invalid=0 send_seq=83729 receive_seq=83729 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996708 heater_bed: target=0 temp=32.6 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=34.6  sysload=0.40 cputime=222.285 memavail=716100 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 3435.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=3546612 bytes_read=1404451 bytes_retransmit=9 bytes_invalid=0 send_seq=83730 receive_seq=83730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996705 heater_bed: target=0 temp=32.7 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=34.4  sysload=0.40 cputime=222.320 memavail=716612 print_time=3378.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-200-g7511151a'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri May 19 02:17:10 2023 (1684462630.6 17.4)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
mcu 'mcu': got {'count': 284, 'sum': 375742, 'sumsq': 3022815, '#name': 'stats', '#sent_time': 22.709873468, '#receive_time': 22.727314801}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 23.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5238 bytes_read=6052 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=250 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=5 upcoming_bytes=0 freq=168002987 heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=31.2 mcu_temp: temp=0.0  sysload=1.93 cputime=5.961 memavail=746332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks client 281473727426128: New connection
Stats 24.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5284 bytes_read=6236 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997596 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=32.5 mcu_temp: temp=18.2  sysload=1.93 cputime=5.987 memavail=742716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
webhooks client 281473727426128: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
webhooks: registering remote method 'shutdown_machine' for connection id: 281473727426128
webhooks: registering remote method 'reboot_machine' for connection id: 281473727426128
webhooks: registering remote method 'pause_job_queue' for connection id: 281473727426128
webhooks: registering remote method 'start_job_queue' for connection id: 281473727426128
Stats 25.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5311 bytes_read=6423 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996082 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=30.5 mcu_temp: temp=18.1  sysload=1.94 cputime=6.050 memavail=741148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 26.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5317 bytes_read=6586 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996092 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=30.2 mcu_temp: temp=18.1  sysload=1.94 cputime=6.112 memavail=738768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 27.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5323 bytes_read=6734 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995981 heater_bed: target=0 temp=21.0 pwm=0.000 raspberry_pi: temp=29.3 mcu_temp: temp=18.1  sysload=1.94 cputime=6.164 memavail=735060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 28.4: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000081 mcu_task_stddev=0.000233 bytes_write=5329 bytes_read=6928 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995864 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.0 mcu_temp: temp=18.3  sysload=1.94 cputime=6.198 memavail=735064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 29.4: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000081 mcu_task_stddev=0.000233 bytes_write=5335 bytes_read=7091 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996092 heater_bed: target=0 temp=20.8 pwm=0.000 raspberry_pi: temp=28.1 mcu_temp: temp=18.5  sysload=1.94 cputime=6.233 memavail=728540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 30.4: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000081 mcu_task_stddev=0.000233 bytes_write=5341 bytes_read=7239 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996150 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.5 mcu_temp: temp=18.4  sysload=1.86 cputime=6.272 memavail=725760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 31.5: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000081 mcu_task_stddev=0.000233 bytes_write=5347 bytes_read=7416 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996214 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.8 mcu_temp: temp=18.6  sysload=1.86 cputime=6.314 memavail=718308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 32.5: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000081 mcu_task_stddev=0.000233 bytes_write=5353 bytes_read=7579 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996322 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.9 mcu_temp: temp=18.3  sysload=1.86 cputime=6.352 memavail=721608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 33.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5359 bytes_read=7741 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996324 heater_bed: target=0 temp=20.8 pwm=0.000 raspberry_pi: temp=29.8 mcu_temp: temp=18.4  sysload=1.86 cputime=6.383 memavail=721752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 34.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5365 bytes_read=7918 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996333 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=28.6 mcu_temp: temp=18.7  sysload=1.86 cputime=6.414 memavail=721892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 35.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5371 bytes_read=8081 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996345 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=27.5 mcu_temp: temp=18.7  sysload=1.71 cputime=6.445 memavail=721668 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 36.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5377 bytes_read=8229 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996352 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=27.5 mcu_temp: temp=18.7  sysload=1.71 cputime=6.475 memavail=721948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 37.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5383 bytes_read=8406 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996388 heater_bed: target=0 temp=21.0 pwm=0.000 raspberry_pi: temp=27.7 mcu_temp: temp=18.5  sysload=1.71 cputime=6.508 memavail=721696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 38.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5389 bytes_read=8583 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996436 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=27.7 mcu_temp: temp=18.9  sysload=1.71 cputime=6.545 memavail=717664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 39.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5395 bytes_read=8731 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996502 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.3 mcu_temp: temp=18.6  sysload=1.71 cputime=6.587 memavail=720096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 40.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5401 bytes_read=8908 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996516 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=30.3 mcu_temp: temp=18.8  sysload=1.66 cputime=6.626 memavail=717956 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 41.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5407 bytes_read=9071 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996560 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.4 mcu_temp: temp=18.7  sysload=1.66 cputime=6.665 memavail=720324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 42.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5413 bytes_read=9219 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996562 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.4 mcu_temp: temp=18.8  sysload=1.66 cputime=6.696 memavail=720284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 43.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5419 bytes_read=9410 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=28.5 mcu_temp: temp=18.9  sysload=1.66 cputime=6.728 memavail=721628 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 44.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5425 bytes_read=9573 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996591 heater_bed: target=0 temp=21.0 pwm=0.000 raspberry_pi: temp=28.5 mcu_temp: temp=18.8  sysload=1.66 cputime=6.760 memavail=721128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 45.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5431 bytes_read=9721 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996609 heater_bed: target=0 temp=21.0 pwm=0.000 raspberry_pi: temp=27.8 mcu_temp: temp=19.1  sysload=1.52 cputime=6.791 memavail=721380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 46.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5437 bytes_read=9898 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996610 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=28.3 mcu_temp: temp=18.9  sysload=1.52 cputime=6.824 memavail=719620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 47.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5443 bytes_read=10061 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996632 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.0 mcu_temp: temp=18.9  sysload=1.52 cputime=6.862 memavail=719136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 48.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5449 bytes_read=10220 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996645 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=30.3 mcu_temp: temp=19.0  sysload=1.52 cputime=6.904 memavail=728840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 49.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5455 bytes_read=10385 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996664 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=31.1 mcu_temp: temp=19.1  sysload=1.52 cputime=6.942 memavail=727324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 50.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5467 bytes_read=10560 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996693 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=30.5 mcu_temp: temp=19.1  sysload=1.40 cputime=6.980 memavail=726584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 51.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5473 bytes_read=10708 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996695 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=30.1 mcu_temp: temp=19.3  sysload=1.40 cputime=7.011 memavail=726404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 52.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5479 bytes_read=10885 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996699 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=28.9 mcu_temp: temp=19.1  sysload=1.40 cputime=7.043 memavail=726164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 53.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5485 bytes_read=11062 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996702 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=28.7 mcu_temp: temp=19.2  sysload=1.40 cputime=7.074 memavail=727228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 54.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5491 bytes_read=11210 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996709 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=28.6 mcu_temp: temp=19.1  sysload=1.40 cputime=7.104 memavail=727252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 55.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5497 bytes_read=11387 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996733 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=28.7 mcu_temp: temp=19.1  sysload=1.37 cputime=7.140 memavail=725488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 56.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5503 bytes_read=11550 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996745 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=29.5 mcu_temp: temp=19.2  sysload=1.37 cputime=7.178 memavail=721844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 57.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5509 bytes_read=11698 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996755 heater_bed: target=0 temp=20.9 pwm=0.000 raspberry_pi: temp=30.9 mcu_temp: temp=19.3  sysload=1.37 cputime=7.218 memavail=722476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 385.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7540 bytes_read=65861 bytes_retransmit=9 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997081 heater_bed: target=0 temp=21.0 pwm=0.000 raspberry_pi: temp=37.1 mcu_temp: temp=23.1  sysload=0.16 cputime=17.616 memavail=723116 print_time=388.465 buffer_time=0.525 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473727426128: Disconnected
Restarting printer
Start printer at Fri May 19 13:12:05 2023 (1684501925.8 387.4)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 285, in setup_sensor
    return self.sensor_factories[sensor_type](config)
  File "/home/biqu/klipper/klippy/extras/temperature_host.py", line 21, in __init__
    self.printer.add_object("temperature_host " + self.name, self)
  File "/home/biqu/klipper/klippy/klippy.py", line 90, in add_object
    raise self.config_error(
configparser.Error: Printer object 'temperature_host raspberry_pi' already created
webhooks client 281473720117616: New connection
webhooks client 281473720117616: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
webhooks client 281473720117616: Disconnected
Restarting printer
Start printer at Fri May 19 13:12:24 2023 (1684501944.2 405.7)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 285, in setup_sensor
    return self.sensor_factories[sensor_type](config)
  File "/home/biqu/klipper/klippy/extras/temperature_host.py", line 21, in __init__
    self.printer.add_object("temperature_host " + self.name, self)
  File "/home/biqu/klipper/klippy/klippy.py", line 90, in add_object
    raise self.config_error(
configparser.Error: Printer object 'temperature_host raspberry_pi' already created
webhooks client 281473720226480: New connection
webhooks client 281473720226480: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473720226480: Disconnected
Restarting printer
Start printer at Fri May 19 13:12:30 2023 (1684501950.6 412.2)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 285, in setup_sensor
    return self.sensor_factories[sensor_type](config)
  File "/home/biqu/klipper/klippy/extras/temperature_host.py", line 21, in __init__
    self.printer.add_object("temperature_host " + self.name, self)
  File "/home/biqu/klipper/klippy/klippy.py", line 90, in add_object
    raise self.config_error(
configparser.Error: Printer object 'temperature_host raspberry_pi' already created
webhooks client 281473701959520: New connection
webhooks client 281473701959520: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
webhooks client 281473701959520: Disconnected
Restarting printer
Start printer at Fri May 19 13:13:06 2023 (1684501986.2 447.7)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 285, in setup_sensor
    return self.sensor_factories[sensor_type](config)
  File "/home/biqu/klipper/klippy/extras/temperature_host.py", line 21, in __init__
    self.printer.add_object("temperature_host " + self.name, self)
  File "/home/biqu/klipper/klippy/klippy.py", line 90, in add_object
    raise self.config_error(
configparser.Error: Printer object 'temperature_host raspberry_pi' already created
webhooks client 281473719267968: New connection
webhooks client 281473719267968: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473719267968: Disconnected
Restarting printer
Start printer at Fri May 19 13:14:36 2023 (1684502076.6 538.1)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan mcu_temp]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 39, in __init__
    algo = config.getchoice('control', algos)
  File "/home/biqu/klipper/klippy/configfile.py", line 75, in getchoice
    c = self.get(option, default, note_valid=note_valid)
  File "/home/biqu/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/biqu/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'control' in section 'temperature_fan mcu_temp' must be specified
webhooks client 281473720095264: New connection
webhooks client 281473720095264: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473720095264: Disconnected
Restarting printer
Start printer at Fri May 19 13:15:34 2023 (1684502134.5 596.0)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan mcu_temp]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0
control = pid
pid_kp = 2.0
pid_ki = 5.0
pid_kd = 0.5
pid_deriv_time = 2.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473702098304: New connection
webhooks client 281473702098304: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473702098304: Disconnected
Restarting printer
Start printer at Fri May 19 13:16:08 2023 (1684502168.6 630.2)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan MCU_fan]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0
control = pid
pid_kp = 2.0
pid_ki = 5.0
pid_kd = 0.5
pid_deriv_time = 2.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473701803488: New connection
webhooks client 281473701803488: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473701803488: Disconnected
Restarting printer
Start printer at Fri May 19 13:16:35 2023 (1684502195.8 657.3)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi_fan]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0
control = pid
pid_kp = 2.0
pid_ki = 5.0
pid_kd = 0.5
pid_deriv_time = 2.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473701815152: New connection
webhooks client 281473701815152: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
webhooks client 281473701815152: Disconnected
Restarting printer
Start printer at Fri May 19 13:16:48 2023 (1684502208.0 669.6)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi_fan]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0
control = pid
pid_kp = 2.0
pid_ki = 5.0
pid_kd = 0.5
pid_deriv_time = 2.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473701863376: New connection
webhooks client 281473701863376: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
MCU 'mcu' shutdown: oids already allocated
clocksync state: mcu_freq=168000000 last_clock=2753921291 clock_est=(672.450 2694073372 168079113.534) min_half_rtt=0.000206 min_rtt_time=672.486 time_avg=672.450(0.018) clock_avg=2694073372.908(3101129.583) pred_variance=21324765809.318
Dumping serial stats: bytes_write=807 bytes_read=4318 bytes_retransmit=9 bytes_invalid=0 send_seq=108 receive_seq=108 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 95 messages
Sent 0 672.162465 672.162465 8: seq: 11, identify offset=0 count=40
Sent 1 672.199551 672.199551 8: seq: 10, identify offset=0 count=40
Sent 2 672.201614 672.201614 8: seq: 11, identify offset=40 count=40
Sent 3 672.203473 672.203473 8: seq: 12, identify offset=80 count=40
Sent 4 672.205545 672.205545 9: seq: 13, identify offset=120 count=40
Sent 5 672.207476 672.207476 9: seq: 14, identify offset=160 count=40
Sent 6 672.209695 672.209695 9: seq: 15, identify offset=200 count=40
Sent 7 672.211486 672.211486 9: seq: 16, identify offset=240 count=40
Sent 8 672.213548 672.213548 9: seq: 17, identify offset=280 count=40
Sent 9 672.215476 672.215476 9: seq: 18, identify offset=320 count=40
Sent 10 672.217546 672.217546 9: seq: 19, identify offset=360 count=40
Sent 11 672.219482 672.219482 9: seq: 1a, identify offset=400 count=40
Sent 12 672.221547 672.221547 9: seq: 1b, identify offset=440 count=40
Sent 13 672.223480 672.223480 9: seq: 1c, identify offset=480 count=40
Sent 14 672.225551 672.225551 9: seq: 1d, identify offset=520 count=40
Sent 15 672.227479 672.227479 9: seq: 1e, identify offset=560 count=40
Sent 16 672.229564 672.229564 9: seq: 1f, identify offset=600 count=40
Sent 17 672.231480 672.231480 9: seq: 10, identify offset=640 count=40
Sent 18 672.233541 672.233541 9: seq: 11, identify offset=680 count=40
Sent 19 672.235486 672.235486 9: seq: 12, identify offset=720 count=40
Sent 20 672.237546 672.237546 9: seq: 13, identify offset=760 count=40
Sent 21 672.239486 672.239486 9: seq: 14, identify offset=800 count=40
Sent 22 672.241547 672.241547 9: seq: 15, identify offset=840 count=40
Sent 23 672.243483 672.243483 9: seq: 16, identify offset=880 count=40
Sent 24 672.245536 672.245536 9: seq: 17, identify offset=920 count=40
Sent 25 672.247483 672.247483 9: seq: 18, identify offset=960 count=40
Sent 26 672.249559 672.249559 9: seq: 19, identify offset=1000 count=40
Sent 27 672.251481 672.251481 9: seq: 1a, identify offset=1040 count=40
Sent 28 672.253574 672.253574 9: seq: 1b, identify offset=1080 count=40
Sent 29 672.255487 672.255487 9: seq: 1c, identify offset=1120 count=40
Sent 30 672.257555 672.257555 9: seq: 1d, identify offset=1160 count=40
Sent 31 672.259487 672.259487 9: seq: 1e, identify offset=1200 count=40
Sent 32 672.261545 672.261545 9: seq: 1f, identify offset=1240 count=40
Sent 33 672.263483 672.263483 9: seq: 10, identify offset=1280 count=40
Sent 34 672.265550 672.265550 9: seq: 11, identify offset=1320 count=40
Sent 35 672.267498 672.267498 9: seq: 12, identify offset=1360 count=40
Sent 36 672.269546 672.269546 9: seq: 13, identify offset=1400 count=40
Sent 37 672.271483 672.271483 9: seq: 14, identify offset=1440 count=40
Sent 38 672.273607 672.273607 9: seq: 15, identify offset=1480 count=40
Sent 39 672.275492 672.275492 9: seq: 16, identify offset=1520 count=40
Sent 40 672.277559 672.277559 9: seq: 17, identify offset=1560 count=40
Sent 41 672.279480 672.279480 9: seq: 18, identify offset=1600 count=40
Sent 42 672.281561 672.281561 9: seq: 19, identify offset=1640 count=40
Sent 43 672.283492 672.283492 9: seq: 1a, identify offset=1680 count=40
Sent 44 672.285578 672.285578 9: seq: 1b, identify offset=1720 count=40
Sent 45 672.287486 672.287486 9: seq: 1c, identify offset=1760 count=40
Sent 46 672.289583 672.289583 9: seq: 1d, identify offset=1800 count=40
Sent 47 672.292692 672.292692 9: seq: 1e, identify offset=1840 count=40
Sent 48 672.294622 672.294622 9: seq: 1f, identify offset=1880 count=40
Sent 49 672.296492 672.296492 9: seq: 10, identify offset=1920 count=40
Sent 50 672.298628 672.298628 9: seq: 11, identify offset=1960 count=40
Sent 51 672.300504 672.300504 9: seq: 12, identify offset=2000 count=40
Sent 52 672.302491 672.302491 9: seq: 13, identify offset=2040 count=40
Sent 53 672.304483 672.304483 9: seq: 14, identify offset=2080 count=40
Sent 54 672.306504 672.306504 9: seq: 15, identify offset=2120 count=40
Sent 55 672.308483 672.308483 9: seq: 16, identify offset=2160 count=40
Sent 56 672.310639 672.310639 9: seq: 17, identify offset=2200 count=40
Sent 57 672.312596 672.312596 9: seq: 18, identify offset=2240 count=40
Sent 58 672.314537 672.314537 9: seq: 19, identify offset=2280 count=40
Sent 59 672.316487 672.316487 9: seq: 1a, identify offset=2320 count=40
Sent 60 672.318492 672.318492 9: seq: 1b, identify offset=2360 count=40
Sent 61 672.320493 672.320493 9: seq: 1c, identify offset=2400 count=40
Sent 62 672.322493 672.322493 9: seq: 1d, identify offset=2440 count=40
Sent 63 672.324480 672.324480 9: seq: 1e, identify offset=2480 count=40
Sent 64 672.326488 672.326488 9: seq: 1f, identify offset=2520 count=40
Sent 65 672.328473 672.328473 9: seq: 10, identify offset=2560 count=40
Sent 66 672.330509 672.330509 9: seq: 11, identify offset=2600 count=40
Sent 67 672.332491 672.332491 9: seq: 12, identify offset=2640 count=40
Sent 68 672.334517 672.334517 9: seq: 13, identify offset=2680 count=40
Sent 69 672.336483 672.336483 9: seq: 14, identify offset=2720 count=40
Sent 70 672.338497 672.338497 9: seq: 15, identify offset=2760 count=40
Sent 71 672.340486 672.340486 9: seq: 16, identify offset=2800 count=40
Sent 72 672.342487 672.342487 9: seq: 17, identify offset=2840 count=40
Sent 73 672.344481 672.344481 9: seq: 18, identify offset=2880 count=40
Sent 74 672.346508 672.346508 9: seq: 19, identify offset=2920 count=40
Sent 75 672.348483 672.348483 9: seq: 1a, identify offset=2960 count=40
Sent 76 672.350491 672.350491 9: seq: 1b, identify offset=3000 count=40
Sent 77 672.352471 672.352471 9: seq: 1c, identify offset=3012 count=40
Sent 78 672.378948 672.378948 6: seq: 1d, get_uptime
Sent 79 672.433548 672.433548 6: seq: 1e, get_clock
Sent 80 672.486169 672.486169 6: seq: 1f, get_clock
Sent 81 672.538441 672.538441 6: seq: 10, get_clock
Sent 82 672.591486 672.591486 6: seq: 11, get_clock
Sent 83 672.644589 672.644589 6: seq: 12, get_clock
Sent 84 672.696876 672.696876 6: seq: 13, get_clock
Sent 85 672.748777 672.748777 6: seq: 14, get_clock
Sent 86 672.801384 672.801384 6: seq: 15, get_clock
Sent 87 672.805091 672.805091 12: seq: 16, debug_read order=1 addr=536836652
Sent 88 672.805642 672.805642 6: seq: 17, get_clock
Sent 89 672.806646 672.806646 12: seq: 18, debug_read order=1 addr=536836654
Sent 90 672.809391 672.809391 6: seq: 19, get_config
Sent 91 672.822536 672.822536 7: seq: 1a, allocate_oids count=28
Sent 92 672.823200 672.823200 12: seq: 1b, config_tmcuart oid=0 rx_pin=PD6 pull_up=0 tx_pin=PD6 bit_time=4200
Sent 93 672.825136 672.825136 12: seq: 1c, config_tmcuart oid=1 rx_pin=PD1 pull_up=0 tx_pin=PD1 bit_time=4200
Sent 94 672.830606 672.830606 12: seq: 1d, config_tmcuart oid=2 rx_pin=PD15 pull_up=0 tx_pin=PD15 bit_time=4200
Dumping receive queue 91 messages
Receive: 0 672.200546 672.199551 48: seq: 11, identify_response offset=0 data=b'x\xda\xa5Z{o\xe4\xb6\x11\xff*\xec\x02A\x93\xc6k\xac\xa4}\x1a\xc8\x1f\xf6\x9e\x93;\xb4N\x9c\xb3\xaf-\x10\x04\x82,qw\x89'
Receive: 1 672.202533 672.201614 48: seq: 12, identify_response offset=40 data=b'\xd3+\xa2\xe4G\x03\x7f\xf7\xce\x83\xa4(\xed\xfa\x12\xb4\x05\xae\x1693|\xcc\x0c\x7f\xf3\xd8\xfc>y\xe8T\x9e\xc5\x8f\xb2\xd1\xaa*\xf5'
Receive: 2 672.204532 672.203473 48: seq: 13, identify_response offset=80 data=b'\xe4b\xb2O\xd3\x0b\xf1u\xb0\xb8XO\xc3Y\xb0\x99\xfe\x16M\x83o\x1f\x82o\xc4\xfa<:\x0f\x04\xce\xcdV\xb3H|\xdd\xc8\\&'
Receive: 3 672.206534 672.205545 49: seq: 14, identify_response offset=120 data=b'Z~#~\x01\x91\xe9z\xfa\xd0$ez\x10\x8d|T\xb8\x96\x08W\xd1,\\\xfd*\x1eT\xd9\xb5*\xd7\xb0jx\x1e-\xce\xc3i'
Receive: 4 672.208531 672.207476 49: seq: 15, identify_response offset=160 data=b'\xf8m0\xff\xf6!\xfcF\xf0xr6I\xab\xa2H\xca\x0c\xf6\xff}\x92\xe4y\x95&\xad\x8c+\x95i\x91V]\xd9~\xf7U:\xb9'
Receive: 5 672.210537 672.209695 49: seq: 16, identify_response offset=200 data=b"X\x9f\xc1a\xdb\x16N\x19'\xe9g\x01T\x98\xf6\xe8\xab\xd0c\xc82\xcbPW\x9a\xfe\xa8\xf2\xbb\xaf:Qwy\x1ew5\x0b\xcc{"
Receive: 6 672.212536 672.211486 49: seq: 17, identify_response offset=240 data=b'\x81\xdf:\xd9\xbc\xb85\xe1\x00\x9f\x91\xbb\x91\xba\x8d[\x95~\xd6<j\xe1\x8a\xbaPmlw\x15\xaa\x04\xd5\x99\xfd#\xb8\x07\xa8\xa4\x89'
Receive: 7 672.214534 672.213548 49: seq: 18, identify_response offset=280 data=b'\xf5\xa1k\xb3\xea\xa9\x9c\\\x84x\xb5r\xa7\xf6p\xa2\xe7<\x9a/\xec\x16\xbaV1\x7fN.\x16\x9b\x9e\xabL\xf2j\x1f\xab\xd2\x9d\x9e'
Receive: 8 672.216532 672.215476 49: seq: 19, identify_response offset=320 data=b'\x8e=\xb9\x88\xfa\x95\xcc\x91-\x07\x0fcO\x0f\x0b\xc7J\x93\xb2\x19.6\xd0\xc1\xba_7S{\xd5&y\\u\xedH\xe01\xc9;'
Receive: 9 672.218535 672.217546 49: seq: 1a, identify_response offset=360 data=b'\x89\xe3L\xee\x92.oc7Q$\xcfq\xd65I\x0b\x06\xa7s\x06+\xb7\x9e\x04{\xb6U=X+\x1dl\x1e.\x1d\xf3!\x9b\xcf'
Receive: 10 672.220533 672.219482 49: seq: 1b, identify_response offset=400 data=b'W\xeb\x99entl\xf6\x96\xf6#\x9b\xbb\xaf\x85\xfbZ\xba\xaf\x95\xfb\x92y\xf2\xe2\x8c\x06\xea\x08\xdc&*L\xed\x06\xf0\t\x8ad\xb3'
Receive: 11 672.222532 672.221547 49: seq: 1c, identify_response offset=440 data=b'\x82\xaf\xe1_\xf0\x19\xb07\x0b-z\xb5\x14u\xb7\t\x173_\xd0\x1an\xd9k\xba\x94U\xad\x9ee>\xd2\\\x96\xb4I\xac\xd5\x7f`'
Receive: 12 672.224530 672.223480 49: seq: 1d, identify_response offset=480 data=b'\x83C\x07/\xa1\x8dQc\x9eGi\tS\xaa\xf4\xce\xbb\x9e\xb9E\xeb\xa7\xe2\x845\xd2\x17\xf0\xb2~\rc\x8bC7\xb6\x0e\xcc\x1c\x99'
Receive: 13 672.226532 672.225551 49: seq: 1e, identify_response offset=520 data=b'g\xd1\x9fXg\xaar>\x84\x0e\xcf\xc7\x04\xa6\xf9\xbag\xaa\xd5xw|}\xadz\x94\xf1A\xed\x0f\xa4\x86h\xc0\x0f>\xbc\xcf\xe5\xb1'
Receive: 14 672.228532 672.227479 49: seq: 1f, identify_response offset=560 data=b"\x9f\x0bG\x8b\xdb\x97Z\xb2\x02\xc3\x81\xa4}7\xa7\x84\r).\xf4\xfe\xbb\xaf\xfe\x06@\x11E\x03\xd9'\xd5\x1e@Wqj\x1f\x06p"
Receive: 15 672.230535 672.229564 49: seq: 10, identify_response offset=600 data=b'\xf4\xbe\xa8\xdb\xd5&t6L\x9dw\xe94\xff\xec\xbeU\xe6>_\xca4\x1e:\x92H\x8b,\x1e\xfb\xd6\xd2\xbby+\xeb\xba\x7fj8'
Receive: 16 672.232531 672.231480 49: seq: 11, identify_response offset=640 data=b'\x8c\x8d\xcbg\xaa\xb1\x9f\x0c\x17\xc4\xdcsu\xb9\x96\xde\xa2a\x7f\xb1\xf6 \x9b\xa2\x82W\\\x9f\xd4\xa8O\xee\x95:\xef\x1d\xa8-\xd2.'
Receive: 17 672.234534 672.233541 49: seq: 12, identify_response offset=680 data=b"i\x9c\x035\xcf\xf1\x11\x04\x88\xd6M\xa2{\xb6\xaa`'X\xf5\xcak\x1b\xd4G\xafVX?\x93\x0f\x1d8}UO.6v\x04\xab"
Receive: 18 672.236530 672.235486 49: seq: 13, identify_response offset=720 data=b'\xec\xc9\xe1\xd9>\x81ckd\x02h\xdcd\xb2\xc1\xfd\xf0\x991T\x84\x96\xe1\xa9Q\xad<\xe2@\xcffFx\xc1\xb2\x90\xcd^\x96\xe9'
Receive: 19 672.238532 672.237546 49: seq: 14, identify_response offset=760 data=b'K\x8c\x98\x02\x87\x80)\xc6\x97\xf8P\x15\xf2\x08\xb9uR\xd4\xfe+1c\x87\xdbCd\x87\xa3\xf7\x98\xc6\xd7u:n\xd4~/\x1b\xbc'
Receive: 20 672.240530 672.239486 49: seq: 15, identify_response offset=800 data=b'\x84\xc6G\x84\xb0\xb5\xe87\xa7\xb8\x01gJZ\xe9\x14\x14B\\\xd9)@rxP1\xebP\xa4M\xca\x1es6\xd9\xc3\x93\xa7s\xc2'
Receive: 21 672.242532 672.241547 49: seq: 16, identify_response offset=840 data=b's4#\xe2\x01\x9d\xf3\xb0\xab\xd1\n`\xc8\xb3\x89\x81\xc5X\xc3~1x\xa0C}\xfcf=\xaff#64\x81e\xeb\xcd\xb1\x04;'
Receive: 22 672.244531 672.243483 49: seq: 17, identify_response offset=880 data=b'!v\x15U\xa6v/1\xd8\xda\xad\xd5HzR\xc2\x04/8\x01RYln\xc4\xd8\x86C~\x9c\x8bsi\x90e\xc6\x8c\xc6\x96\xe3'
Receive: 23 672.246533 672.245536 49: seq: 18, identify_response offset=920 data=b'\xed\x17`C\x95\xc9\xb2\x85\xcdE\xb5\xdb\xc1.\xf4\xa8\\\xd4\x02\xba\xc5P\xba\x86\xd3\xe6j\xedQ\xba:\xeb5\xcd\xa1\xfd\xd0y\xdb\xac'
Receive: 24 672.248536 672.247483 49: seq: 19, identify_response offset=960 data=b'\xe0\xb8l\x92Q\xbc=\x1d\xd2\xe1\\\xeb\x91\x00\xd9\xb2\xebAd\xb1r\x0c\xe3\xd8\xfc?:[\xd1;\x9b\x81\xe8~\x04\xf9\xc5\x1e\x04\x0f'
Receive: 25 672.250532 672.249559 49: seq: 1a, identify_response offset=1000 data=b'2\xfd\xecE\xf4(\xb0g\x18\x05tw\x82\xba\x82\xf7<\xde\xdf\x8b)n\x81Q4{K-\xcb\xf9H`\xac\x96ed\x19\x8e \xff'
Receive: 26 672.252532 672.251481 49: seq: 1b, identify_response offset=1040 data=b"\x8d\xec\t}\x1a\x10^\xed\xf8NKw\xa4S \xf7\xc6\x1a\x9e\xea\x06\x9a\xe3\x01\x80+\xbc\xb9\xccW\x1c\xbbC'O%7n\x8f\xca"
Receive: 27 672.254532 672.253574 49: seq: 1c, identify_response offset=1080 data=b'\x0f\xbf\xc1\xc2\x8a\x8c\xa2\xafcw\xd6\x02\xe7\x98[fDr\x97"\xa0\x89\x18\xbc\xac\x83\x1f(\xbd\x80\xbf\n\xe0\x01p\x8f\x02?\xd8%'
Receive: 28 672.256532 672.255487 49: seq: 1d, identify_response offset=1120 data=b'2\x9f$\xcf\xa80\xde\x0f\x04\xe0ia\xb4\xa6G8x\xde\x80\x02\x04\x98\xcd\xbe+$\xee\x83\xd1{>\xe6\x86Dg\xb7\xeb\x9d\xa6\x7f'
Receive: 29 672.258533 672.257555 49: seq: 1e, identify_response offset=1160 data=b'}\xf4v1b\x84F\x84a\x86s\xf1\xb7\xf7\x10O\x89b\xfd\xce\x17N\xb0\xc5t\xca\xc5(\x9c\xe3\xf4\n\x98V\x1e\x93\xae\xa5\xcc\xfa'
Receive: 30 672.260528 672.259487 49: seq: 1f, identify_response offset=1200 data=b'P\x06\x03\xe6Y\x1a\x1e\x82\x8f?\xbect\xc4\xfe\xe6%{p\x98\x83\xcb\xe1\x19|_\x18e\xb8`\xff\xe8\x88\x89<\x81\xb2.w\xa6'
Receive: 31 672.262532 672.261545 49: seq: 10, identify_response offset=1240 data=b'A\n\x06BK\x16*\xe5\xb31%\xc4|\x07\x82\xaa\xe1\xb0`\xb6\xb7~\xf5\x07\xe9\x1cx\x17\x1e\xa5O\x9a\xb0\xf6\xf0n\xe8A\xfb\x8c'
Receive: 32 672.264528 672.263483 49: seq: 11, identify_response offset=1280 data=b'\xf9<\xd8\xf4\xa8\xd1\xdcR\x87&\x82)\x93\x00CH\x90^"\x0c"\xcb^DW\xbb\xf6)i\xa4/[(]\xd9\xa4\xa1\xa8\xb4:'
Receive: 33 672.266535 672.265550 49: seq: 12, identify_response offset=1320 data=b'\x95M\x1d-\xba0\x8b\xbe}\x8f\x08\xbd\x89\x12\xb5/\xc5\xbb\xe5j\xc8\xf5F\xb8\xc3\xdd8%\x8b1\xa6B\xa8P\x98\x05;\x00\x0b6'
Receive: 34 672.268532 672.267498 49: seq: 13, identify_response offset=1360 data=b'=\x03ErD\x01\x8e\xf5\xc2\x85~/\x11\x00\t\x08\x15&\xa1\x1a\xa8\x9a|\xd0\x05D\x8eY\xb0\xbb\x91F\x1d"\xf4\x9d@\x12p\x89'
Receive: 35 672.270534 672.269546 49: seq: 14, identify_response offset=1400 data=b'u\xcf\xd7\xfa\x89\x9a\xac\xab\xc6d\t\x8c\x824vN"\x9fk\x05&\xf1s\x92\x8d[it\x0b\x9f\tT\xc7\x11\xf4\x14\x1ezo`'
Receive: 36 672.272531 672.271483 49: seq: 15, identify_response offset=1440 data=b'\xfej\x93?,\xc8/\xdfm\xe3\x9b\xcb\x7fcf\xb9\x01\x13]}\xba\x8bo?\xfcx\x87\xe5T0\xb9\x98\xdc^-\xcfn\xafV\x93'
Receive: 37 672.274534 672.273607 49: seq: 16, identify_response offset=1480 data=b'\x11%!\xd2\x1aH\x9b\x11)$\n\xe4\x87\xf0\x7f\xc1\x98Fb\xef\xe7g\xb7\xef\x17#R\x84\x94KXp;^0b\xa1\x15\x08\xad'
Receive: 38 672.276530 672.275492 49: seq: 17, identify_response offset=1520 data=b'}\x12B\x04R\xb6\x90j\xde\xbe\x83\x7f[\x92\x86\x7f\xb8\xf9v\xb89\xf8&\xdd\xe6\x12ns\tK].\xc6T\xbe\x11\x1c\xedj\x01'
Receive: 39 672.278531 672.277559 49: seq: 18, identify_response offset=1560 data=b'\xff\xa2\x11\xd9\xdc\n\xc9\x01\xd2\x83#\x06\x92\xdf\xe21"\xa4\xcf\xc6\xf4\x07\xa4\x7f\x00\xfa\x07\xa0\x7f\x18\x1f.\xfa\xe2\xee\xac\x02\xb8\xd2\x19'
Receive: 40 672.280529 672.279480 49: seq: 19, identify_response offset=1600 data=b"\xdfvK\xcbo\xff\xf1\xd3\xf6\xef\xf1\xf7\x1f\xaf\x7fF\x8cZ\xcf\xe8\x7fg\x93\x9b\xed'\xe0\xd6m\x11\x85\xbb\xf9l\xf5\xfc\x0c\xac\xb7\xff"
Receive: 41 672.282534 672.281561 49: seq: 1a, identify_response offset=1640 data=b'\xbaa#\x87X#~\xbc\xbe\xbb\xfe\xf8\xcfk^\xfe\xd3\xdd\x15)\x06\x17\xbf\x0c\xb0]3 \xa7\xcd\x0b8oN&\x00\xb5\xbe\xc7\x83'
Receive: 42 672.284533 672.283492 49: seq: 1b, identify_response offset=1680 data=b'\xdf\xdd_\xde\xdf\xc5w\x9fn\xee~\x8e\xaf.\xef\xaeq\xd9%N_\xdf\xde^\x7f\x8c\xaf~\xba\x7f\x1f_\xbf\xfb\x01\xe6\x83WL\xa6'
Receive: 43 672.286534 672.285578 49: seq: 1c, identify_response offset=1720 data=b"\x01\xda\xb9J\xa5\x0e\x90)\xce\xcd'X\x85sK4@@_!uV\x8c\xbb\xcc\xe9+\xa2\x9a\xc08\xc3\x02\x16\x05\x1c\xb2\xce{\x7f"
Receive: 44 672.288528 672.287486 49: seq: 1d, identify_response offset=1760 data=b'}\x03\xbb^\xde\x7f\xfaH\x07\x01\x81\xdb\xcb\xd9\xe4\xe2\x97\xd9Y\xb0\xfc\x15\x06W8\x00\x0c\xe7\xd1\x16GQhF\xefp\x04\x151\x8f'
Receive: 45 672.290568 672.289583 49: seq: 1e, identify_response offset=1800 data=b'\xaeq\x04\xc9\x11\x8f\xbe\xc7\xd1\xda\xae\xf2\x03\x8e6v\x95\xf7\xb4f`\x97\xf9@\xc3\x90\xd6y5\xc1\xcb\\\x91\xbdt\xf6:\x00{('
Receive: 46 672.293590 672.292692 49: seq: 1f, identify_response offset=1840 data=b'\xe6\xa8\x17\x16DQD\xf7O\xf4b6_e\xa4\x816\x97\x8bY\x80\xfe\x12\x1a)\xbb\x14\xf9p@s\xa8\xad\x90\xbeBZ\xc0x '
Receive: 47 672.295536 672.294622 49: seq: 10, identify_response offset=1880 data=b'\xc7\x14\x94e<\x8eH\x81\xc6\x83Po\x98\xe8)\xc4\xa3\x06\xea\xb9XeF\x89\x82\x90b\xc7\x19*\xb7n.s\x04\xbc\x17ak\x9d'
Receive: 48 672.297543 672.296492 49: seq: 11, identify_response offset=1920 data=b'\x8c\xa3\xe76)EY\xb5\x02\x90O`\xf4\x10\x10\xf08\xca\t\x020\xf1tP\xf0\xcd@\xa4E\rP\n;q\x9a\x03\xb2\x7fm1'
Receive: 49 672.299535 672.298628 49: seq: 12, identify_response offset=1960 data=b'U\x82j|\x0f\xabB\x89\x9b\xb4Bi\x91\x98\xbd\xb8\xf7\xc05\x98a\xd6\xc8\x8a \xc6\x95"\xcfRVE9\'l\'Ka\xcbs'
Receive: 50 672.301543 672.300504 49: seq: 13, identify_response offset=2000 data=b"'\x0f\xaa\xd9\x9aD\xa7N\x1a\r$\xd94UCE\x98%4\x12\x92;\xddR\xeb\xf1\xfb\x04\x0e\x9d\x89\xb6\x12\x84\xfd\xd8J\xc2:\x95"
Receive: 51 672.303531 672.302491 49: seq: 14, identify_response offset=2040 data=b's\xa0\x0f\x9cy\nxD"=$e)s\xae\x88,\xc1\xf6\xec\xfa\x16"g\x86\x1c\xf4,\x97\xc9\xbc\xa8.\xec\xe7\x80\r\x8f\x98\x14'
Receive: 52 672.305536 672.304483 49: seq: 15, identify_response offset=2080 data=b'\x12\xd2Jn\x0fXbQ=J{J\x81\xfd\x1b\xc4\xee\x9e\xec\x9aR\xae\r\xc5\xdd\x81#\xba)\xab\xdc\xfe\x987[&P\xac`w'
Receive: 53 672.307533 672.306504 49: seq: 16, identify_response offset=2120 data=b"\xc4\x82\xdd\xceR\xf7\x88\xbcn\xee\xf1b\xbb\x88'\xd7\xc3I\x1bL0\x02y\xf3\xa6pH\x0f\xaa6{D\xde\xf1\x07\x85\x81\xc7\x83\xb1"
Receive: 54 672.309573 672.308483 49: seq: 17, identify_response offset=2160 data=b'\xee&yFo\\[\xcdr\xb7\xe7Fj\x9d\xec\xa5\x90e\n\xe9\x87\xb5(\xb8\xea\x8d\xd2\x1a\xac\xa7\xa1\xb2\xca\xba\x1c\x1b\x15 \x8c\xd9'
Receive: 55 672.311582 672.310639 49: seq: 18, identify_response offset=2200 data=b'\x9a0\x81\x90\xdc[>J4\t&jo\x0b\x1c\x92&#\x976\xdc\xd8\x99\xbdA;P! \xe0\xab\xd9\xe5\xd5\x13W\x12?\xc2;'
Receive: 56 672.313556 672.312596 49: seq: 19, identify_response offset=2240 data=b'H\x04_\x07\x1f\x11\x81\x12f\xe8>\x01\xbd\x86\x08\xd8u\xf4\t\xaa\xac9O\xe4\xdc\x95H%\x9e\xb4\x9f\x0e\t\xb9\xdd\xf3\xa8\x9bj\x0f'
Receive: 57 672.315532 672.314537 49: seq: 1a, identify_response offset=2280 data=b'\x9eR\xc0\xd1\x13\xbc\x1b\xa6\xc4pJ\xce\xb4\xb9\n\xff(\xcd\xa5\xd0\x9b\xe1}4\xb0\r\xaa\x1a|\x0c]\x1dS\xeb;\xc7p\xa4\x1d\xf1'
Receive: 58 672.317542 672.316487 49: seq: 1b, identify_response offset=2320 data=b'\xa4\xf2\x1c\xf2\x8f\x14\xd3x\xbf\xbd\xc8\x19U/\xe94\xf4\x05\t\xack\xef\xe0\x99\xb2\r\xe9\x00\xc8\xa1\x8a\xae\xb0s\xf6\x95`\xf0\xb0\xdd'
Receive: 59 672.319533 672.318492 49: seq: 1c, identify_response offset=2360 data=b'A\xeaS\xc0b\xf4\xb0\ti\xfc~\xfb\x9dy\xe9mU\x89]B\xb7\xe3\x9ba[\xe6\xdew)T\x190R\xd3\x94s\xb1{\xd2\x07'
Receive: 60 672.321544 672.320493 49: seq: 1d, identify_response offset=2400 data=b'JB\xea\xa5%\xa1\xe5\xa7Rw5\xa6_\x92_=\xfb78\x1b\xfdN\x01\xb5zW~\x865\x10\x1d\xb8\xfd\xed\xcd\xeb\x9e\x00\x17`'
Receive: 61 672.323532 672.322493 49: seq: 1e, identify_response offset=2440 data=b'g\x07\xf8\xd0UC\xaf\x16r8-R\xcd\xa6\xf4\xfa\x99\x0c^U\x99\x03\xde=\xc2\x02\xc9Cna\xcc\xdd\x94\xfb2\xc2\xa4\x96\\A'
Receive: 62 672.325542 672.324480 49: seq: 1f, identify_response offset=2480 data=b"\x8d\xfa;\x17\xe2'\x00R\x88\xad\x0f\x98\r\xee\xb0\xbf\xa7\xff\xc2\xfd;\xfai\xc5a\xaa\xf9\xc1%\xe3\xa6\x9d\xc6.\r \x98\xf1\x8e\x14"
Receive: 63 672.327529 672.326488 49: seq: 10, identify_response offset=2520 data=b'\xc8H\x9a\xbb\xec\x97\xe0\x84\xb4\x94CU&\xb9\x01|"\xafD\xd3\xb0#cs\xd6@/?\x13\xcc\xa6!\xd6\x1c501\xd8@\x16'
Receive: 64 672.329533 672.328473 49: seq: 11, identify_response offset=2560 data=b'\x12\x05\xeb\xc5\x82\xa2\x96\x19,)\xaa\xf1`\xb9 ;\xc3`\xb9\\\xc1w\xf4\xfaJUt\r0 \xf9\x17$\xd3\xca\xf1K\x03\x8d('
Receive: 65 672.331533 672.330509 49: seq: 12, identify_response offset=2600 data=b'Y\xa6r\xd40\x9a"\x9c\x9el\xfd\xf4\x05\xbfiS\xd8\xe4\x9b\x8b<\x7f9.=%I\xed\xd4\xae\xc2\xbf\xb9\xf2~\'\xc2jn\x8a'
Receive: 66 672.333536 672.332491 49: seq: 13, identify_response offset=2640 data=b'\xfe\xe7zH\x83\x96!/y\xaa\xc10\x8d\xbc\x1f\xb5\x06"\x89\xd7!\x12D1\x17\xa2_`\xa8\x91\xd0\xd7\x19k\xf7\x0b\x13\xc4R\xd3'
Receive: 67 672.335530 672.334517 49: seq: 14, identify_response offset=2680 data=b'n\xa4+RW\x12\xe7\xaccQy\x07\x18\xe6\x9f|C\rej<}\xe9\xd8F\xc2|\xc4\xfd\xeeS\x8cI\xb6\x15\xac\xe1\xb1\xb9\xce'
Receive: 68 672.337539 672.336483 49: seq: 15, identify_response offset=2720 data=b'\xee&\xec;\xa9\x83\x95\x0fU\x01\x98{\xbc\x87\xdf\xa8\x05\xf1y\xdf\x9c\x8c\xad\x07\xf4u\x0f\x8f\xad\x9d\x17}\x03\xd2\xe3\x1d\xb5\t\xce\x91'
Receive: 69 672.339533 672.338497 49: seq: 16, identify_response offset=2760 data=b'\x17\xb3\xcd^#b\x9c\x10\xb1R\xd6\xb0\x9e\xed\x8d\xfd\x19?\xc3\xea\xf1d/\xed\xff\xf2\xb3\xee\x84\x9f!\x0e\xbb\x86\xa9Q\xb8=\\\x97'
Receive: 70 672.341540 672.340486 49: seq: 17, identify_response offset=2800 data=b"\xa6\xf4\x13W\x8a|p\x03\xd0\x82\xdf\xb3\xdf\x04o\xf4\x8e\x8e\xb4\xeb\xbf\xa0\xcd\x91\xd0\x98\x9b\x02\xb1)F\xb9\xe13\rW'zN_"
Receive: 71 672.343531 672.342487 49: seq: 18, identify_response offset=2840 data=b'\x12\x1cZ\xf3\xb8_\xf4\xb6\xac)\xd0iW\xb0\x82\xee\xe3\x88\xed\xdf\x9e\xb6\xf0\xd2\xcf\xc8\xff\x14\x96\xcc|\t\xafE\xe0\x0b _p\xaa'
Receive: 72 672.345533 672.344481 49: seq: 19, identify_response offset=2880 data=b'\xb1st\x01\xbf\t:\xb8|8\xec\xa4\xfc\x91\xebc\x98\xa5\xf6\x02\xa5\xd9\xeb9\xe7\xf8\xba\x7f\xb0\xba+\xcc\x1f\xfd\x1b\xe3\xc5\xaao\x8e'
Receive: 73 672.347530 672.346508 49: seq: 1a, identify_response offset=2920 data=b"\x8c:'\xdctW\xe0+\xd1\x08\xbf\x87\xaev\x12\xd2:\x0e\xb6\xec\x7f\x18\x87l?\xe5\xf8\x06\xe8'\xfcp\x96~\x8f\xa4\x87\x884q"
Receive: 74 672.349541 672.348483 49: seq: 1b, identify_response offset=2960 data=b'\r\x9b\x93\xbf\xd3x\xf0\x87]\x0b\xfeQE\xf0\x8f\x96\x9d\x8f\x8d\x18\x88\xcc\x7f\xff\x005\xec\xe3\xec<\x08\xceg\xd3 \x0c\xa7{\xb9\x94'
Receive: 75 672.351530 672.350491 21: seq: 1c, identify_response offset=3000 data=b"\xbb\xf9:\xcd&\xaf\xff\x05'\xf9\xf4\x16"
Receive: 76 672.353577 672.352471 9: seq: 1d, identify_response offset=3012 data=b''
Receive: 77 672.379698 672.378948 12: seq: 1e, uptime high=0 clock=2682110405
Receive: 78 672.434596 672.433548 11: seq: 1f, clock clock=2691284350
Receive: 79 672.486582 672.486169 11: seq: 10, clock clock=2700124529
Receive: 80 672.539551 672.538441 11: seq: 11, clock clock=2708905611
Receive: 81 672.592542 672.591486 11: seq: 12, clock clock=2717815828
Receive: 82 672.645553 672.644589 11: seq: 13, clock clock=2726737621
Receive: 83 672.697542 672.696876 11: seq: 14, clock clock=2735520600
Receive: 84 672.749543 672.748777 11: seq: 15, clock clock=2744239700
Receive: 85 672.802588 672.801384 11: seq: 16, clock clock=2753079799
Receive: 86 672.805564 672.805091 8: seq: 17, debug_result val=964
Receive: 87 672.807563 672.805642 11: seq: 18, clock clock=2753921291
Receive: 88 672.807582 672.806646 8: seq: 19, debug_result val=1212
Receive: 89 672.810608 672.809391 10: seq: 1a, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 90 672.823656 672.822536 12: seq: 1b, shutdown clock=2756633907 static_string_id=oids already allocated
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Transition to shutdown state: MCU 'mcu' shutdown: oids already allocated
Dumping 10 requests for client 281473701863376
Received 672.003966: b'{"id": 281473098812288, "method": "info", "params": {"client_info": {"program": "Moonraker", "version": "v0.8.0-40-gb21f177"}}}'
Received 672.035142: b'{"id": 281473098813104, "method": "list_endpoints", "params": {}}'
Received 672.073367: b'{"id": 281473098810368, "method": "info", "params": {}}'
Received 672.101426: b'{"id": 281473098811184, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 672.128837: b'{"id": 281473098810944, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "print_stats": ["print_duration", "total_duration", "filament_used", "filename", "state", "message", "info"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "webhooks": ["state", "state_message"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "extruder": ["target", "temperature", "pressure_advance", "smooth_time", "power"], "heater_bed": ["target", "temperature", "power"], "temperature_sensor raspberry_pi": ["target", "temperature", "power"], "temperature_sensor mcu_temp": ["target", "temperature", "power"], "temperature_fan raspberry_pi_fan": ["target", "temperature", "power"], "heater_fan heatbreak_cooling_fan": ["speed"]}, "response_template": {"method": "process_status_update"}}}'
Received 672.149618: b'{"id": 281473099674144, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "temperature_sensor raspberry_pi": null, "temperature_sensor mcu_temp": null, "temperature_fan raspberry_pi_fan": null, "heater_fan heatbreak_cooling_fan": null}}}'
Received 672.290446: b'{"id": 281473099674336, "method": "info", "params": {}}'
Received 672.498630: b'{"id": 281473099675200, "method": "info", "params": {}}'
Received 672.545899: b'{"id": 281473098811040, "method": "info", "params": {}}'
Received 672.799928: b'{"id": 281473098810896, "method": "info", "params": {}}'
Reactor garbage collection: (672.379039278, 0.0, 0.0)
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473701863376: Disconnected
Restarting printer
Start printer at Fri May 19 13:18:13 2023 (1684502293.2 754.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi_fan]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 39, in __init__
    algo = config.getchoice('control', algos)
  File "/home/biqu/klipper/klippy/configfile.py", line 75, in getchoice
    c = self.get(option, default, note_valid=note_valid)
  File "/home/biqu/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/biqu/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'control' in section 'temperature_fan raspberry_pi_fan' must be specified
webhooks client 281473719738576: New connection
webhooks client 281473719738576: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473719738576: Disconnected
Restarting printer
Start printer at Fri May 19 13:18:42 2023 (1684502322.5 784.0)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi_fan]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0
control = pid
pid_kp = 2.0
pid_ki = 5.0
pid_kd = 0.5
pid_deriv_time = 2.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473719795776: New connection
webhooks client 281473719795776: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
webhooks client 281473719795776: Disconnected
Restarting printer
Start printer at Fri May 19 13:19:57 2023 (1684502397.2 858.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
sensor_type = temperature_host
pin = PG19
max_temp = 80.0
target_temp = 49.0
min_temp = 0
shutdown_speed = 0.0
kick_start_time = 0.5
off_below = 0.19
max_speed = 1.0
min_speed = 0.0
control = pid
pid_kp = 2.0
pid_ki = 5.0
pid_kd = 0.5
pid_deriv_time = 2.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 285, in setup_sensor
    return self.sensor_factories[sensor_type](config)
  File "/home/biqu/klipper/klippy/extras/temperature_host.py", line 21, in __init__
    self.printer.add_object("temperature_host " + self.name, self)
  File "/home/biqu/klipper/klippy/klippy.py", line 90, in add_object
    raise self.config_error(
configparser.Error: Printer object 'temperature_host raspberry_pi' already created
webhooks client 281473726897120: New connection
webhooks client 281473726897120: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473726897120: Disconnected
Restarting printer
Start printer at Fri May 19 13:21:01 2023 (1684502461.7 923.3)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[controller_fan MCU_fan]
pin = PG19
max_power = 1.0
kick_start_time = 0.5
heater = extruder

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473719701312: New connection
webhooks client 281473719701312: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473719701312: Disconnected
Restarting printer
Start printer at Fri May 19 13:21:44 2023 (1684502504.9 966.4)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[controller_fan raspberry_pi_fan]
pin = PG19
max_power = 1.0
kick_start_time = 0.5

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473719798464: New connection
webhooks client 281473719798464: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
webhooks client 281473719798464: Disconnected
Restarting printer
Start printer at Fri May 19 13:21:54 2023 (1684502514.6 976.1)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[controller_fan raspberry_pi_fan]
pin = PG19
max_power = 1.0
kick_start_time = 0.5

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473701976912: New connection
webhooks client 281473701976912: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
MCU 'mcu' shutdown: oids already allocated
clocksync state: mcu_freq=168000000 last_clock=2324071415 clock_est=(979.021 2264458817 168032038.927) min_half_rtt=0.000173 min_rtt_time=979.162 time_avg=979.020(0.018) clock_avg=2264458817.083(3077053.250) pred_variance=20922685685.095
Dumping serial stats: bytes_write=843 bytes_read=4330 bytes_retransmit=9 bytes_invalid=0 send_seq=108 receive_seq=106 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 95 messages
Sent 0 978.731309 978.731309 8: seq: 11, identify offset=0 count=40
Sent 1 978.768359 978.768359 8: seq: 1d, identify offset=0 count=40
Sent 2 978.770407 978.770407 8: seq: 1e, identify offset=40 count=40
Sent 3 978.772442 978.772442 8: seq: 1f, identify offset=80 count=40
Sent 4 978.774365 978.774365 9: seq: 10, identify offset=120 count=40
Sent 5 978.776454 978.776454 9: seq: 11, identify offset=160 count=40
Sent 6 978.778363 978.778363 9: seq: 12, identify offset=200 count=40
Sent 7 978.780462 978.780462 9: seq: 13, identify offset=240 count=40
Sent 8 978.782368 978.782368 9: seq: 14, identify offset=280 count=40
Sent 9 978.784446 978.784446 9: seq: 15, identify offset=320 count=40
Sent 10 978.786367 978.786367 9: seq: 16, identify offset=360 count=40
Sent 11 978.788456 978.788456 9: seq: 17, identify offset=400 count=40
Sent 12 978.790469 978.790469 9: seq: 18, identify offset=440 count=40
Sent 13 978.792464 978.792464 9: seq: 19, identify offset=480 count=40
Sent 14 978.794367 978.794367 9: seq: 1a, identify offset=520 count=40
Sent 15 978.796455 978.796455 9: seq: 1b, identify offset=560 count=40
Sent 16 978.798374 978.798374 9: seq: 1c, identify offset=600 count=40
Sent 17 978.800463 978.800463 9: seq: 1d, identify offset=640 count=40
Sent 18 978.802371 978.802371 9: seq: 1e, identify offset=680 count=40
Sent 19 978.804451 978.804451 9: seq: 1f, identify offset=720 count=40
Sent 20 978.806392 978.806392 9: seq: 10, identify offset=760 count=40
Sent 21 978.808453 978.808453 9: seq: 11, identify offset=800 count=40
Sent 22 978.810367 978.810367 9: seq: 12, identify offset=840 count=40
Sent 23 978.812469 978.812469 9: seq: 13, identify offset=880 count=40
Sent 24 978.814372 978.814372 9: seq: 14, identify offset=920 count=40
Sent 25 978.816598 978.816598 9: seq: 15, identify offset=960 count=40
Sent 26 978.818376 978.818376 9: seq: 16, identify offset=1000 count=40
Sent 27 978.820473 978.820473 9: seq: 17, identify offset=1040 count=40
Sent 28 978.822399 978.822399 9: seq: 18, identify offset=1080 count=40
Sent 29 978.824450 978.824450 9: seq: 19, identify offset=1120 count=40
Sent 30 978.826378 978.826378 9: seq: 1a, identify offset=1160 count=40
Sent 31 978.828462 978.828462 9: seq: 1b, identify offset=1200 count=40
Sent 32 978.830394 978.830394 9: seq: 1c, identify offset=1240 count=40
Sent 33 978.832512 978.832512 9: seq: 1d, identify offset=1280 count=40
Sent 34 978.834396 978.834396 9: seq: 1e, identify offset=1320 count=40
Sent 35 978.836469 978.836469 9: seq: 1f, identify offset=1360 count=40
Sent 36 978.838403 978.838403 9: seq: 10, identify offset=1400 count=40
Sent 37 978.840459 978.840459 9: seq: 11, identify offset=1440 count=40
Sent 38 978.842373 978.842373 9: seq: 12, identify offset=1480 count=40
Sent 39 978.844465 978.844465 9: seq: 13, identify offset=1520 count=40
Sent 40 978.846394 978.846394 9: seq: 14, identify offset=1560 count=40
Sent 41 978.848452 978.848452 9: seq: 15, identify offset=1600 count=40
Sent 42 978.850372 978.850372 9: seq: 16, identify offset=1640 count=40
Sent 43 978.852543 978.852543 9: seq: 17, identify offset=1680 count=40
Sent 44 978.854405 978.854405 9: seq: 18, identify offset=1720 count=40
Sent 45 978.856457 978.856457 9: seq: 19, identify offset=1760 count=40
Sent 46 978.858374 978.858374 9: seq: 1a, identify offset=1800 count=40
Sent 47 978.867688 978.867688 9: seq: 1b, identify offset=1840 count=40
Sent 48 978.869904 978.869904 9: seq: 1c, identify offset=1880 count=40
Sent 49 978.871811 978.871811 9: seq: 1d, identify offset=1920 count=40
Sent 50 978.873729 978.873729 9: seq: 1e, identify offset=1960 count=40
Sent 51 978.875816 978.875816 9: seq: 1f, identify offset=2000 count=40
Sent 52 978.877776 978.877776 9: seq: 10, identify offset=2040 count=40
Sent 53 978.879762 978.879762 9: seq: 11, identify offset=2080 count=40
Sent 54 978.881543 978.881543 9: seq: 12, identify offset=2120 count=40
Sent 55 978.883568 978.883568 9: seq: 13, identify offset=2160 count=40
Sent 56 978.885423 978.885423 9: seq: 14, identify offset=2200 count=40
Sent 57 978.887473 978.887473 9: seq: 15, identify offset=2240 count=40
Sent 58 978.889607 978.889607 9: seq: 16, identify offset=2280 count=40
Sent 59 978.891470 978.891470 9: seq: 17, identify offset=2320 count=40
Sent 60 978.893414 978.893414 9: seq: 18, identify offset=2360 count=40
Sent 61 978.895393 978.895393 9: seq: 19, identify offset=2400 count=40
Sent 62 978.897593 978.897593 9: seq: 1a, identify offset=2440 count=40
Sent 63 978.899428 978.899428 9: seq: 1b, identify offset=2480 count=40
Sent 64 978.901473 978.901473 9: seq: 1c, identify offset=2520 count=40
Sent 65 978.903421 978.903421 9: seq: 1d, identify offset=2560 count=40
Sent 66 978.905433 978.905433 9: seq: 1e, identify offset=2600 count=40
Sent 67 978.907656 978.907656 9: seq: 1f, identify offset=2640 count=40
Sent 68 978.909426 978.909426 9: seq: 10, identify offset=2680 count=40
Sent 69 978.911387 978.911387 9: seq: 11, identify offset=2720 count=40
Sent 70 978.913440 978.913440 9: seq: 12, identify offset=2760 count=40
Sent 71 978.916149 978.916149 9: seq: 13, identify offset=2800 count=40
Sent 72 978.918710 978.918710 9: seq: 14, identify offset=2840 count=40
Sent 73 978.920689 978.920689 9: seq: 15, identify offset=2880 count=40
Sent 74 978.922632 978.922632 9: seq: 16, identify offset=2920 count=40
Sent 75 978.924842 978.924842 9: seq: 17, identify offset=2960 count=40
Sent 76 978.926557 978.926557 9: seq: 18, identify offset=3000 count=40
Sent 77 978.928700 978.928700 9: seq: 19, identify offset=3012 count=40
Sent 78 978.949488 978.949488 6: seq: 1a, get_uptime
Sent 79 979.003899 979.003899 6: seq: 1b, get_clock
Sent 80 979.056238 979.056238 6: seq: 1c, get_clock
Sent 81 979.108789 979.108789 6: seq: 1d, get_clock
Sent 82 979.162075 979.162075 6: seq: 1e, get_clock
Sent 83 979.213729 979.213729 6: seq: 1f, get_clock
Sent 84 979.265662 979.265662 6: seq: 10, get_clock
Sent 85 979.317717 979.317717 6: seq: 11, get_clock
Sent 86 979.370358 979.370358 6: seq: 12, get_clock
Sent 87 979.373973 979.373973 12: seq: 13, debug_read order=1 addr=536836652
Sent 88 979.374916 979.374916 6: seq: 14, get_clock
Sent 89 979.375550 979.375550 12: seq: 15, debug_read order=1 addr=536836654
Sent 90 979.378158 979.378158 6: seq: 16, get_config
Sent 91 979.386234 979.386234 7: seq: 17, allocate_oids count=28
Sent 92 979.386774 979.386774 12: seq: 18, config_tmcuart oid=0 rx_pin=PD6 pull_up=0 tx_pin=PD6 bit_time=4200
Sent 93 979.387088 979.387088 12: seq: 19, config_tmcuart oid=1 rx_pin=PD1 pull_up=0 tx_pin=PD1 bit_time=4200
Sent 94 979.387232 979.387232 12: seq: 1a, config_tmcuart oid=2 rx_pin=PD15 pull_up=0 tx_pin=PD15 bit_time=4200
Dumping receive queue 91 messages
Receive: 0 978.769410 978.768359 48: seq: 1e, identify_response offset=0 data=b'x\xda\xa5Z{o\xe4\xb6\x11\xff*\xec\x02A\x93\xc6k\xac\xa4}\x1a\xc8\x1f\xf6\x9e\x93;\xb4N\x9c\xb3\xaf-\x10\x04\x82,qw\x89'
Receive: 1 978.771413 978.770407 48: seq: 1f, identify_response offset=40 data=b'\xd3+\xa2\xe4G\x03\x7f\xf7\xce\x83\xa4(\xed\xfa\x12\xb4\x05\xae\x1693|\xcc\x0c\x7f\xf3\xd8\xfc>y\xe8T\x9e\xc5\x8f\xb2\xd1\xaa*\xf5'
Receive: 2 978.773413 978.772442 48: seq: 10, identify_response offset=80 data=b'\xe4b\xb2O\xd3\x0b\xf1u\xb0\xb8XO\xc3Y\xb0\x99\xfe\x16M\x83o\x1f\x82o\xc4\xfa<:\x0f\x04\xce\xcdV\xb3H|\xdd\xc8\\&'
Receive: 3 978.775410 978.774365 49: seq: 11, identify_response offset=120 data=b'Z~#~\x01\x91\xe9z\xfa\xd0$ez\x10\x8d|T\xb8\x96\x08W\xd1,\\\xfd*\x1eT\xd9\xb5*\xd7\xb0jx\x1e-\xce\xc3i'
Receive: 4 978.777410 978.776454 49: seq: 12, identify_response offset=160 data=b'\xf8m0\xff\xf6!\xfcF\xf0xr6I\xab\xa2H\xca\x0c\xf6\xff}\x92\xe4y\x95&\xad\x8c+\x95i\x91V]\xd9~\xf7U:\xb9'
Receive: 5 978.779411 978.778363 49: seq: 13, identify_response offset=200 data=b"X\x9f\xc1a\xdb\x16N\x19'\xe9g\x01T\x98\xf6\xe8\xab\xd0c\xc82\xcbPW\x9a\xfe\xa8\xf2\xbb\xaf:Qwy\x1ew5\x0b\xcc{"
Receive: 6 978.781411 978.780462 49: seq: 14, identify_response offset=240 data=b'\x81\xdf:\xd9\xbc\xb85\xe1\x00\x9f\x91\xbb\x91\xba\x8d[\x95~\xd6<j\xe1\x8a\xbaPmlw\x15\xaa\x04\xd5\x99\xfd#\xb8\x07\xa8\xa4\x89'
Receive: 7 978.783411 978.782368 49: seq: 15, identify_response offset=280 data=b'\xf5\xa1k\xb3\xea\xa9\x9c\\\x84x\xb5r\xa7\xf6p\xa2\xe7<\x9a/\xec\x16\xbaV1\x7fN.\x16\x9b\x9e\xabL\xf2j\x1f\xab\xd2\x9d\x9e'
Receive: 8 978.785409 978.784446 49: seq: 16, identify_response offset=320 data=b'\x8e=\xb9\x88\xfa\x95\xcc\x91-\x07\x0fcO\x0f\x0b\xc7J\x93\xb2\x19.6\xd0\xc1\xba_7S{\xd5&y\\u\xedH\xe01\xc9;'
Receive: 9 978.787409 978.786367 49: seq: 17, identify_response offset=360 data=b'\x89\xe3L\xee\x92.oc7Q$\xcfq\xd65I\x0b\x06\xa7s\x06+\xb7\x9e\x04{\xb6U=X+\x1dl\x1e.\x1d\xf3!\x9b\xcf'
Receive: 10 978.789411 978.788456 49: seq: 18, identify_response offset=400 data=b'W\xeb\x99entl\xf6\x96\xf6#\x9b\xbb\xaf\x85\xfbZ\xba\xaf\x95\xfb\x92y\xf2\xe2\x8c\x06\xea\x08\xdc&*L\xed\x06\xf0\t\x8ad\xb3'
Receive: 11 978.791411 978.790469 49: seq: 19, identify_response offset=440 data=b'\x82\xaf\xe1_\xf0\x19\xb07\x0b-z\xb5\x14u\xb7\t\x173_\xd0\x1an\xd9k\xba\x94U\xad\x9ee>\xd2\\\x96\xb4I\xac\xd5\x7f`'
Receive: 12 978.793408 978.792464 49: seq: 1a, identify_response offset=480 data=b'\x83C\x07/\xa1\x8dQc\x9eGi\tS\xaa\xf4\xce\xbb\x9e\xb9E\xeb\xa7\xe2\x845\xd2\x17\xf0\xb2~\rc\x8bC7\xb6\x0e\xcc\x1c\x99'
Receive: 13 978.795407 978.794367 49: seq: 1b, identify_response offset=520 data=b'g\xd1\x9fXg\xaar>\x84\x0e\xcf\xc7\x04\xa6\xf9\xbag\xaa\xd5xw|}\xadz\x94\xf1A\xed\x0f\xa4\x86h\xc0\x0f>\xbc\xcf\xe5\xb1'
Receive: 14 978.797411 978.796455 49: seq: 1c, identify_response offset=560 data=b"\x9f\x0bG\x8b\xdb\x97Z\xb2\x02\xc3\x81\xa4}7\xa7\x84\r).\xf4\xfe\xbb\xaf\xfe\x06@\x11E\x03\xd9'\xd5\x1e@Wqj\x1f\x06p"
Receive: 15 978.799411 978.798374 49: seq: 1d, identify_response offset=600 data=b'\xf4\xbe\xa8\xdb\xd5&t6L\x9dw\xe94\xff\xec\xbeU\xe6>_\xca4\x1e:\x92H\x8b,\x1e\xfb\xd6\xd2\xbby+\xeb\xba\x7fj8'
Receive: 16 978.801415 978.800463 49: seq: 1e, identify_response offset=640 data=b'\x8c\x8d\xcbg\xaa\xb1\x9f\x0c\x17\xc4\xdcsu\xb9\x96\xde\xa2a\x7f\xb1\xf6 \x9b\xa2\x82W\\\x9f\xd4\xa8O\xee\x95:\xef\x1d\xa8-\xd2.'
Receive: 17 978.803409 978.802371 49: seq: 1f, identify_response offset=680 data=b"i\x9c\x035\xcf\xf1\x11\x04\x88\xd6M\xa2{\xb6\xaa`'X\xf5\xcak\x1b\xd4G\xafVX?\x93\x0f\x1d8}UO.6v\x04\xab"
Receive: 18 978.805412 978.804451 49: seq: 10, identify_response offset=720 data=b'\xec\xc9\xe1\xd9>\x81ckd\x02h\xdcd\xb2\xc1\xfd\xf0\x991T\x84\x96\xe1\xa9Q\xad<\xe2@\xcffFx\xc1\xb2\x90\xcd^\x96\xe9'
Receive: 19 978.807410 978.806392 49: seq: 11, identify_response offset=760 data=b'K\x8c\x98\x02\x87\x80)\xc6\x97\xf8P\x15\xf2\x08\xb9uR\xd4\xfe+1c\x87\xdbCd\x87\xa3\xf7\x98\xc6\xd7u:n\xd4~/\x1b\xbc'
Receive: 20 978.809410 978.808453 49: seq: 12, identify_response offset=800 data=b'\x84\xc6G\x84\xb0\xb5\xe87\xa7\xb8\x01gJZ\xe9\x14\x14B\\\xd9)@rxP1\xebP\xa4M\xca\x1es6\xd9\xc3\x93\xa7s\xc2'
Receive: 21 978.811411 978.810367 49: seq: 13, identify_response offset=840 data=b's4#\xe2\x01\x9d\xf3\xb0\xab\xd1\n`\xc8\xb3\x89\x81\xc5X\xc3~1x\xa0C}\xfcf=\xaff#64\x81e\xeb\xcd\xb1\x04;'
Receive: 22 978.813411 978.812469 49: seq: 14, identify_response offset=880 data=b'!v\x15U\xa6v/1\xd8\xda\xad\xd5HzR\xc2\x04/8\x01RYln\xc4\xd8\x86C~\x9c\x8bsi\x90e\xc6\x8c\xc6\x96\xe3'
Receive: 23 978.815408 978.814372 49: seq: 15, identify_response offset=920 data=b'\xed\x17`C\x95\xc9\xb2\x85\xcdE\xb5\xdb\xc1.\xf4\xa8\\\xd4\x02\xba\xc5P\xba\x86\xd3\xe6j\xedQ\xba:\xeb5\xcd\xa1\xfd\xd0y\xdb\xac'
Receive: 24 978.817410 978.816598 49: seq: 16, identify_response offset=960 data=b'\xe0\xb8l\x92Q\xbc=\x1d\xd2\xe1\\\xeb\x91\x00\xd9\xb2\xebAd\xb1r\x0c\xe3\xd8\xfc?:[\xd1;\x9b\x81\xe8~\x04\xf9\xc5\x1e\x04\x0f'
Receive: 25 978.819413 978.818376 49: seq: 17, identify_response offset=1000 data=b'2\xfd\xecE\xf4(\xb0g\x18\x05tw\x82\xba\x82\xf7<\xde\xdf\x8b)n\x81Q4{K-\xcb\xf9H`\xac\x96ed\x19\x8e \xff'
Receive: 26 978.821410 978.820473 49: seq: 18, identify_response offset=1040 data=b"\x8d\xec\t}\x1a\x10^\xed\xf8NKw\xa4S \xf7\xc6\x1a\x9e\xea\x06\x9a\xe3\x01\x80+\xbc\xb9\xccW\x1c\xbbC'O%7n\x8f\xca"
Receive: 27 978.823407 978.822399 49: seq: 19, identify_response offset=1080 data=b'\x0f\xbf\xc1\xc2\x8a\x8c\xa2\xafcw\xd6\x02\xe7\x98[fDr\x97"\xa0\x89\x18\xbc\xac\x83\x1f(\xbd\x80\xbf\n\xe0\x01p\x8f\x02?\xd8%'
Receive: 28 978.825411 978.824450 49: seq: 1a, identify_response offset=1120 data=b'2\x9f$\xcf\xa80\xde\x0f\x04\xe0ia\xb4\xa6G8x\xde\x80\x02\x04\x98\xcd\xbe+$\xee\x83\xd1{>\xe6\x86Dg\xb7\xeb\x9d\xa6\x7f'
Receive: 29 978.827409 978.826378 49: seq: 1b, identify_response offset=1160 data=b'}\xf4v1b\x84F\x84a\x86s\xf1\xb7\xf7\x10O\x89b\xfd\xce\x17N\xb0\xc5t\xca\xc5(\x9c\xe3\xf4\n\x98V\x1e\x93\xae\xa5\xcc\xfa'
Receive: 30 978.829412 978.828462 49: seq: 1c, identify_response offset=1200 data=b'P\x06\x03\xe6Y\x1a\x1e\x82\x8f?\xbect\xc4\xfe\xe6%{p\x98\x83\xcb\xe1\x19|_\x18e\xb8`\xff\xe8\x88\x89<\x81\xb2.w\xa6'
Receive: 31 978.831410 978.830394 49: seq: 1d, identify_response offset=1240 data=b'A\n\x06BK\x16*\xe5\xb31%\xc4|\x07\x82\xaa\xe1\xb0`\xb6\xb7~\xf5\x07\xe9\x1cx\x17\x1e\xa5O\x9a\xb0\xf6\xf0n\xe8A\xfb\x8c'
Receive: 32 978.833410 978.832512 49: seq: 1e, identify_response offset=1280 data=b'\xf9<\xd8\xf4\xa8\xd1\xdcR\x87&\x82)\x93\x00CH\x90^"\x0c"\xcb^DW\xbb\xf6)i\xa4/[(]\xd9\xa4\xa1\xa8\xb4:'
Receive: 33 978.835405 978.834396 49: seq: 1f, identify_response offset=1320 data=b'\x95M\x1d-\xba0\x8b\xbe}\x8f\x08\xbd\x89\x12\xb5/\xc5\xbb\xe5j\xc8\xf5F\xb8\xc3\xdd8%\x8b1\xa6B\xa8P\x98\x05;\x00\x0b6'
Receive: 34 978.837416 978.836469 49: seq: 10, identify_response offset=1360 data=b'=\x03ErD\x01\x8e\xf5\xc2\x85~/\x11\x00\t\x08\x15&\xa1\x1a\xa8\x9a|\xd0\x05D\x8eY\xb0\xbb\x91F\x1d"\xf4\x9d@\x12p\x89'
Receive: 35 978.839411 978.838403 49: seq: 11, identify_response offset=1400 data=b'u\xcf\xd7\xfa\x89\x9a\xac\xab\xc6d\t\x8c\x824vN"\x9fk\x05&\xf1s\x92\x8d[it\x0b\x9f\tT\xc7\x11\xf4\x14\x1ezo`'
Receive: 36 978.841411 978.840459 49: seq: 12, identify_response offset=1440 data=b'\xfej\x93?,\xc8/\xdfm\xe3\x9b\xcb\x7fcf\xb9\x01\x13]}\xba\x8bo?\xfcx\x87\xe5T0\xb9\x98\xdc^-\xcfn\xafV\x93'
Receive: 37 978.843412 978.842373 49: seq: 13, identify_response offset=1480 data=b'\x11%!\xd2\x1aH\x9b\x11)$\n\xe4\x87\xf0\x7f\xc1\x98Fb\xef\xe7g\xb7\xef\x17#R\x84\x94KXp;^0b\xa1\x15\x08\xad'
Receive: 38 978.845412 978.844465 49: seq: 14, identify_response offset=1520 data=b'}\x12B\x04R\xb6\x90j\xde\xbe\x83\x7f[\x92\x86\x7f\xb8\xf9v\xb89\xf8&\xdd\xe6\x12ns\tK].\xc6T\xbe\x11\x1c\xedj\x01'
Receive: 39 978.847408 978.846394 49: seq: 15, identify_response offset=1560 data=b'\xff\xa2\x11\xd9\xdc\n\xc9\x01\xd2\x83#\x06\x92\xdf\xe21"\xa4\xcf\xc6\xf4\x07\xa4\x7f\x00\xfa\x07\xa0\x7f\x18\x1f.\xfa\xe2\xee\xac\x02\xb8\xd2\x19'
Receive: 40 978.849413 978.848452 49: seq: 16, identify_response offset=1600 data=b"\xdfvK\xcbo\xff\xf1\xd3\xf6\xef\xf1\xf7\x1f\xaf\x7fF\x8cZ\xcf\xe8\x7fg\x93\x9b\xed'\xe0\xd6m\x11\x85\xbb\xf9l\xf5\xfc\x0c\xac\xb7\xff"
Receive: 41 978.851413 978.850372 49: seq: 17, identify_response offset=1640 data=b'\xbaa#\x87X#~\xbc\xbe\xbb\xfe\xf8\xcfk^\xfe\xd3\xdd\x15)\x06\x17\xbf\x0c\xb0]3 \xa7\xcd\x0b8oN&\x00\xb5\xbe\xc7\x83'
Receive: 42 978.853415 978.852543 49: seq: 18, identify_response offset=1680 data=b'\xdf\xdd_\xde\xdf\xc5w\x9fn\xee~\x8e\xaf.\xef\xaeq\xd9%N_\xdf\xde^\x7f\x8c\xaf~\xba\x7f\x1f_\xbf\xfb\x01\xe6\x83WL\xa6'
Receive: 43 978.855409 978.854405 49: seq: 19, identify_response offset=1720 data=b"\x01\xda\xb9J\xa5\x0e\x90)\xce\xcd'X\x85sK4@@_!uV\x8c\xbb\xcc\xe9+\xa2\x9a\xc08\xc3\x02\x16\x05\x1c\xb2\xce{\x7f"
Receive: 44 978.857407 978.856457 49: seq: 1a, identify_response offset=1760 data=b'}\x03\xbb^\xde\x7f\xfaH\x07\x01\x81\xdb\xcb\xd9\xe4\xe2\x97\xd9Y\xb0\xfc\x15\x06W8\x00\x0c\xe7\xd1\x16GQhF\xefp\x04\x151\x8f'
Receive: 45 978.859477 978.858374 49: seq: 1b, identify_response offset=1800 data=b'\xaeq\x04\xc9\x11\x8f\xbe\xc7\xd1\xda\xae\xf2\x03\x8e6v\x95\xf7\xb4f`\x97\xf9@\xc3\x90\xd6y5\xc1\xcb\\\x91\xbdt\xf6:\x00{('
Receive: 46 978.868511 978.867688 49: seq: 1c, identify_response offset=1840 data=b'\xe6\xa8\x17\x16DQD\xf7O\xf4b6_e\xa4\x816\x97\x8bY\x80\xfe\x12\x1a)\xbb\x14\xf9p@s\xa8\xad\x90\xbeBZ\xc0x '
Receive: 47 978.870508 978.869904 49: seq: 1d, identify_response offset=1880 data=b'\xc7\x14\x94e<\x8eH\x81\xc6\x83Po\x98\xe8)\xc4\xa3\x06\xea\xb9XeF\x89\x82\x90b\xc7\x19*\xb7n.s\x04\xbc\x17ak\x9d'
Receive: 48 978.872519 978.871811 49: seq: 1e, identify_response offset=1920 data=b'\x8c\xa3\xe76)EY\xb5\x02\x90O`\xf4\x10\x10\xf08\xca\t\x020\xf1tP\xf0\xcd@\xa4E\rP\n;q\x9a\x03\xb2\x7fm1'
Receive: 49 978.874500 978.873729 49: seq: 1f, identify_response offset=1960 data=b'U\x82j|\x0f\xabB\x89\x9b\xb4Bi\x91\x98\xbd\xb8\xf7\xc05\x98a\xd6\xc8\x8a \xc6\x95"\xcfRVE9\'l\'Ka\xcbs'
Receive: 50 978.876524 978.875816 49: seq: 10, identify_response offset=2000 data=b"'\x0f\xaa\xd9\x9aD\xa7N\x1a\r$\xd94UCE\x98%4\x12\x92;\xddR\xeb\xf1\xfb\x04\x0e\x9d\x89\xb6\x12\x84\xfd\xd8J\xc2:\x95"
Receive: 51 978.878514 978.877776 49: seq: 11, identify_response offset=2040 data=b's\xa0\x0f\x9cy\nxD"=$e)s\xae\x88,\xc1\xf6\xec\xfa\x16"g\x86\x1c\xf4,\x97\xc9\xbc\xa8.\xec\xe7\x80\r\x8f\x98\x14'
Receive: 52 978.880451 978.879762 49: seq: 12, identify_response offset=2080 data=b'\x12\xd2Jn\x0fXbQ=J{J\x81\xfd\x1b\xc4\xee\x9e\xec\x9aR\xae\r\xc5\xdd\x81#\xba)\xab\xdc\xfe\x987[&P\xac`w'
Receive: 53 978.882470 978.881543 49: seq: 13, identify_response offset=2120 data=b"\xc4\x82\xdd\xceR\xf7\x88\xbcn\xee\xf1b\xbb\x88'\xd7\xc3I\x1bL0\x02y\xf3\xa6pH\x0f\xaa6{D\xde\xf1\x07\x85\x81\xc7\x83\xb1"
Receive: 54 978.884433 978.883568 49: seq: 14, identify_response offset=2160 data=b'\xee&yFo\\[\xcdr\xb7\xe7Fj\x9d\xec\xa5\x90e\n\xe9\x87\xb5(\xb8\xea\x8d\xd2\x1a\xac\xa7\xa1\xb2\xca\xba\x1c\x1b\x15 \x8c\xd9'
Receive: 55 978.886416 978.885423 49: seq: 15, identify_response offset=2200 data=b'\x9a0\x81\x90\xdc[>J4\t&jo\x0b\x1c\x92&#\x976\xdc\xd8\x99\xbdA;P! \xe0\xab\xd9\xe5\xd5\x13W\x12?\xc2;'
Receive: 56 978.888476 978.887473 49: seq: 16, identify_response offset=2240 data=b'H\x04_\x07\x1f\x11\x81\x12f\xe8>\x01\xbd\x86\x08\xd8u\xf4\t\xaa\xac9O\xe4\xdc\x95H%\x9e\xb4\x9f\x0e\t\xb9\xdd\xf3\xa8\x9bj\x0f'
Receive: 57 978.890458 978.889607 49: seq: 17, identify_response offset=2280 data=b'\x9eR\xc0\xd1\x13\xbc\x1b\xa6\xc4pJ\xce\xb4\xb9\n\xff(\xcd\xa5\xd0\x9b\xe1}4\xb0\r\xaa\x1a|\x0c]\x1dS\xeb;\xc7p\xa4\x1d\xf1'
Receive: 58 978.892423 978.891470 49: seq: 18, identify_response offset=2320 data=b'\xa4\xf2\x1c\xf2\x8f\x14\xd3x\xbf\xbd\xc8\x19U/\xe94\xf4\x05\t\xack\xef\xe0\x99\xb2\r\xe9\x00\xc8\xa1\x8a\xae\xb0s\xf6\x95`\xf0\xb0\xdd'
Receive: 59 978.894416 978.893414 49: seq: 19, identify_response offset=2360 data=b'A\xeaS\xc0b\xf4\xb0\ti\xfc~\xfb\x9dy\xe9mU\x89]B\xb7\xe3\x9ba[\xe6\xdew)T\x190R\xd3\x94s\xb1{\xd2\x07'
Receive: 60 978.896472 978.895393 49: seq: 1a, identify_response offset=2400 data=b'JB\xea\xa5%\xa1\xe5\xa7Rw5\xa6_\x92_=\xfb78\x1b\xfdN\x01\xb5zW~\x865\x10\x1d\xb8\xfd\xed\xcd\xeb\x9e\x00\x17`'
Receive: 61 978.898429 978.897593 49: seq: 1b, identify_response offset=2440 data=b'g\x07\xf8\xd0UC\xaf\x16r8-R\xcd\xa6\xf4\xfa\x99\x0c^U\x99\x03\xde=\xc2\x02\xc9Cna\xcc\xdd\x94\xfb2\xc2\xa4\x96\\A'
Receive: 62 978.900423 978.899428 49: seq: 1c, identify_response offset=2480 data=b"\x8d\xfa;\x17\xe2'\x00R\x88\xad\x0f\x98\r\xee\xb0\xbf\xa7\xff\xc2\xfd;\xfai\xc5a\xaa\xf9\xc1%\xe3\xa6\x9d\xc6.\r \x98\xf1\x8e\x14"
Receive: 63 978.902428 978.901473 49: seq: 1d, identify_response offset=2520 data=b'\xc8H\x9a\xbb\xec\x97\xe0\x84\xb4\x94CU&\xb9\x01|"\xafD\xd3\xb0#cs\xd6@/?\x13\xcc\xa6!\xd6\x1c501\xd8@\x16'
Receive: 64 978.904423 978.903421 49: seq: 1e, identify_response offset=2560 data=b'\x12\x05\xeb\xc5\x82\xa2\x96\x19,)\xaa\xf1`\xb9 ;\xc3`\xb9\\\xc1w\xf4\xfaJUt\r0 \xf9\x17$\xd3\xca\xf1K\x03\x8d('
Receive: 65 978.906517 978.905433 49: seq: 1f, identify_response offset=2600 data=b'Y\xa6r\xd40\x9a"\x9c\x9el\xfd\xf4\x05\xbfiS\xd8\xe4\x9b\x8b<\x7f9.=%I\xed\xd4\xae\xc2\xbf\xb9\xf2~\'\xc2jn\x8a'
Receive: 66 978.908424 978.907656 49: seq: 10, identify_response offset=2640 data=b'\xfe\xe7zH\x83\x96!/y\xaa\xc10\x8d\xbc\x1f\xb5\x06"\x89\xd7!\x12D1\x17\xa2_`\xa8\x91\xd0\xd7\x19k\xf7\x0b\x13\xc4R\xd3'
Receive: 67 978.910417 978.909426 49: seq: 11, identify_response offset=2680 data=b'n\xa4+RW\x12\xe7\xaccQy\x07\x18\xe6\x9f|C\rej<}\xe9\xd8F\xc2|\xc4\xfd\xeeS\x8cI\xb6\x15\xac\xe1\xb1\xb9\xce'
Receive: 68 978.912421 978.911387 49: seq: 12, identify_response offset=2720 data=b'\xee&\xec;\xa9\x83\x95\x0fU\x01\x98{\xbc\x87\xdf\xa8\x05\xf1y\xdf\x9c\x8c\xad\x07\xf4u\x0f\x8f\xad\x9d\x17}\x03\xd2\xe3\x1d\xb5\t\xce\x91'
Receive: 69 978.914511 978.913440 49: seq: 13, identify_response offset=2760 data=b'\x17\xb3\xcd^#b\x9c\x10\xb1R\xd6\xb0\x9e\xed\x8d\xfd\x19?\xc3\xea\xf1d/\xed\xff\xf2\xb3\xee\x84\x9f!\x0e\xbb\x86\xa9Q\xb8=\\\x97'
Receive: 70 978.917486 978.916149 49: seq: 14, identify_response offset=2800 data=b"\xa6\xf4\x13W\x8a|p\x03\xd0\x82\xdf\xb3\xdf\x04o\xf4\x8e\x8e\xb4\xeb\xbf\xa0\xcd\x91\xd0\x98\x9b\x02\xb1)F\xb9\xe13\rW'zN_"
Receive: 71 978.919459 978.918710 49: seq: 15, identify_response offset=2840 data=b'\x12\x1cZ\xf3\xb8_\xf4\xb6\xac)\xd0iW\xb0\x82\xee\xe3\x88\xed\xdf\x9e\xb6\xf0\xd2\xcf\xc8\xff\x14\x96\xcc|\t\xafE\xe0\x0b _p\xaa'
Receive: 72 978.921452 978.920689 49: seq: 16, identify_response offset=2880 data=b'\xb1st\x01\xbf\t:\xb8|8\xec\xa4\xfc\x91\xebc\x98\xa5\xf6\x02\xa5\xd9\xeb9\xe7\xf8\xba\x7f\xb0\xba+\xcc\x1f\xfd\x1b\xe3\xc5\xaao\x8e'
Receive: 73 978.923462 978.922632 49: seq: 17, identify_response offset=2920 data=b"\x8c:'\xdctW\xe0+\xd1\x08\xbf\x87\xaev\x12\xd2:\x0e\xb6\xec\x7f\x18\x87l?\xe5\xf8\x06\xe8'\xfcp\x96~\x8f\xa4\x87\x884q"
Receive: 74 978.925499 978.924842 49: seq: 18, identify_response offset=2960 data=b'\r\x9b\x93\xbf\xd3x\xf0\x87]\x0b\xfeQE\xf0\x8f\x96\x9d\x8f\x8d\x18\x88\xcc\x7f\xff\x005\xec\xe3\xec<\x08\xceg\xd3 \x0c\xa7{\xb9\x94'
Receive: 75 978.927556 978.926557 21: seq: 19, identify_response offset=3000 data=b"\xbb\xf9:\xcd&\xaf\xff\x05'\xf9\xf4\x16"
Receive: 76 978.929515 978.928700 9: seq: 1a, identify_response offset=3012 data=b''
Receive: 77 978.950507 978.949488 12: seq: 1b, uptime high=0 clock=2252541582
Receive: 78 979.004509 979.003899 11: seq: 1c, clock clock=2261683922
Receive: 79 979.057436 979.056238 11: seq: 1d, clock clock=2270477266
Receive: 80 979.109483 979.108789 11: seq: 1e, clock clock=2279301359
Receive: 81 979.162421 979.162075 11: seq: 1f, clock clock=2288255016
Receive: 82 979.214411 979.213729 11: seq: 10, clock clock=2296931856
Receive: 83 979.266422 979.265662 11: seq: 11, clock clock=2305656242
Receive: 84 979.318412 979.317717 11: seq: 12, clock clock=2314401039
Receive: 85 979.371439 979.370358 11: seq: 13, clock clock=2323245300
Receive: 86 979.374465 979.373973 8: seq: 14, debug_result val=964
Receive: 87 979.376427 979.374916 11: seq: 15, clock clock=2324071415
Receive: 88 979.376446 979.375550 8: seq: 16, debug_result val=1212
Receive: 89 979.379438 979.378158 10: seq: 17, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 90 979.387497 979.386234 12: seq: 18, shutdown clock=2325916635 static_string_id=oids already allocated
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Transition to shutdown state: MCU 'mcu' shutdown: oids already allocated
Dumping 10 requests for client 281473701976912
Received 978.574838: b'{"id": 281473100611440, "method": "info", "params": {"client_info": {"program": "Moonraker", "version": "v0.8.0-40-gb21f177"}}}'
Received 978.574838: b'{"id": 281473099239920, "method": "info", "params": {}}'
Received 978.606567: b'{"id": 281473100610192, "method": "list_endpoints", "params": {}}'
Received 978.606567: b'{"id": 281473099242560, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 978.634724: b'{"id": 281473100611440, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "print_stats": ["print_duration", "total_duration", "filament_used", "filename", "state", "message", "info"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "webhooks": ["state", "state_message"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "extruder": ["target", "temperature", "pressure_advance", "smooth_time", "power"], "heater_bed": ["target", "temperature", "power"], "temperature_sensor raspberry_pi": ["target", "temperature", "power"], "temperature_sensor mcu_temp": ["target", "temperature", "power"], "controller_fan raspberry_pi_fan": ["speed"], "heater_fan heatbreak_cooling_fan": ["speed"]}, "response_template": {"method": "process_status_update"}}}'
Received 978.655365: b'{"id": 281473099239824, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "temperature_sensor raspberry_pi": null, "temperature_sensor mcu_temp": null, "controller_fan raspberry_pi_fan": null, "heater_fan heatbreak_cooling_fan": null}}}'
Received 978.866460: b'{"id": 281473100696256, "method": "info", "params": {}}'
Received 979.051610: b'{"id": 281473100610240, "method": "info", "params": {}}'
Received 979.131421: b'{"id": 281473100611536, "method": "info", "params": {}}'
Received 979.405194: b'{"id": 281473100610144, "method": "info", "params": {}}'
Reactor garbage collection: (978.949590132, 0.0, 0.0)
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473701976912: Disconnected
Restarting printer
Start printer at Fri May 19 13:22:02 2023 (1684502522.3 983.9)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[controller_fan raspberry_pi_fan]
pin = PG19
max_power = 1.0
kick_start_time = 0.5

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473719688112: New connection
webhooks client 281473719688112: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473719688112: Disconnected
Restarting printer
Start printer at Fri May 19 13:23:00 2023 (1684502580.6 1042.2)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[controller_fan raspberry_pi_fan]
pin = PG19

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473701675840: New connection
webhooks client 281473701675840: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473701675840: Disconnected
Restarting printer
Start printer at Fri May 19 13:27:07 2023 (1684502828.0 1289.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[controller_fan raspberry_pi_fan]
pin = PG19

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473701853216: New connection
webhooks client 281473701853216: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473701853216: Disconnected
Restarting printer
Start printer at Fri May 19 13:27:38 2023 (1684502858.3 1319.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[controller_fan]
pin = PG19

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/biqu/klipper/klippy/configfile.py", line 299, in check_unused_options
    raise error("Section '%s' is not a valid config section"
configparser.Error: Section 'controller_fan' is not a valid config section
webhooks client 281473719764976: New connection
webhooks client 281473719764976: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473719764976: Disconnected
Restarting printer
Start printer at Fri May 19 13:28:02 2023 (1684502882.4 1343.9)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PG19

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473719689024: New connection
webhooks client 281473719689024: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473719689024: Disconnected
Restarting printer
Start printer at Fri May 19 13:30:12 2023 (1684503012.4 1474.0)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
pin = PG19
max_power = 0.4
shutdown_speed = 0.0
control = watermark
max_delta = 5.0
sensor_type = temperature_host!

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 18, in __init__
    self.min_temp = config.getfloat('min_temp', minval=KELVIN_TO_CELSIUS)
  File "/home/biqu/klipper/klippy/configfile.py", line 65, in getfloat
    return self._get_wrapper(self.fileconfig.getfloat, option, default,
  File "/home/biqu/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'min_temp' in section 'temperature_fan raspberry_pi' must be specified
webhooks client 281473719840832: New connection
webhooks client 281473719840832: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473719840832: Disconnected
Restarting printer
Start printer at Fri May 19 13:30:54 2023 (1684503055.0 1516.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
pin = PG19
max_power = 0.4
shutdown_speed = 0.0
control = watermark
max_delta = 5.0
sensor_type = temperature_host!
min_temp = 0
max_temp = 100
target_temp = 50.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 281, in setup_sensor
    raise self.printer.config_error(
configparser.Error: Unknown temperature sensor 'temperature_host!'
webhooks client 281473727282096: New connection
webhooks client 281473727282096: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473727282096: Disconnected
Restarting printer
Start printer at Fri May 19 13:31:14 2023 (1684503074.6 1536.2)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
pin = PG19
max_power = 0.4
shutdown_speed = 0.0
control = watermark
max_delta = 5.0
sensor_type = temperature_host
min_temp = 0
max_temp = 100
target_temp = 50.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 285, in setup_sensor
    return self.sensor_factories[sensor_type](config)
  File "/home/biqu/klipper/klippy/extras/temperature_host.py", line 21, in __init__
    self.printer.add_object("temperature_host " + self.name, self)
  File "/home/biqu/klipper/klippy/klippy.py", line 90, in add_object
    raise self.config_error(
configparser.Error: Printer object 'temperature_host raspberry_pi' already created
webhooks client 281473720346704: New connection
webhooks client 281473720346704: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473720346704: Disconnected
Restarting printer
Start printer at Fri May 19 13:32:09 2023 (1684503129.8 1591.3)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
pin = PG19
max_power = 0.4
shutdown_speed = 0.0
control = watermark
max_delta = 5.0
min_temp = 0
max_temp = 100
target_temp = 50.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 279, in setup_sensor
    sensor_type = config.get('sensor_type')
  File "/home/biqu/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/biqu/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'sensor_type' in section 'temperature_fan raspberry_pi' must be specified
webhooks client 281473727710736: New connection
webhooks client 281473727710736: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473727710736: Disconnected
Restarting printer
Start printer at Fri May 19 13:33:45 2023 (1684503225.3 1686.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
min_temp = 10
max_temp = 100

[temperature_fan raspberry_pi]
pin = PG19
max_power = 0.4
shutdown_speed = 0.0
control = watermark
max_delta = 5.0
sensor_type = temperature_host
min_temp = 0
max_temp = 100
target_temp = 50.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_sensor.py", line 42, in load_config_prefix
    return PrinterSensorGeneric(config)
  File "/home/biqu/klipper/klippy/extras/temperature_sensor.py", line 14, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 279, in setup_sensor
    sensor_type = config.get('sensor_type')
  File "/home/biqu/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/biqu/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'sensor_type' in section 'temperature_sensor raspberry_pi' must be specified
webhooks client 281473719949872: New connection
webhooks client 281473719949872: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473719949872: Disconnected
Restarting printer
Start printer at Fri May 19 13:34:30 2023 (1684503270.6 1732.2)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_fan raspberry_pi]
pin = PG19
max_power = 0.4
shutdown_speed = 0.0
control = watermark
max_delta = 5.0
sensor_type = temperature_host
min_temp = 0
max_temp = 100
target_temp = 50.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473720461344: New connection
webhooks client 281473720461344: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473720461344: Disconnected
Restarting printer
Start printer at Fri May 19 13:35:01 2023 (1684503301.8 1763.3)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
min_temp = 10
max_temp = 100
sensor_type = temperature_host

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473720413248: New connection
webhooks client 281473720413248: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 1767.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=4848 bytes_read=6082 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=259 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=420 upcoming_bytes=25 freq=168023906 heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=43.1 mcu_temp: temp=0.0  sysload=0.59 cputime=91.336 memavail=713976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473720413248
webhooks: registering remote method 'reboot_machine' for connection id: 281473720413248
webhooks: registering remote method 'pause_job_queue' for connection id: 281473720413248
webhooks: registering remote method 'start_job_queue' for connection id: 281473720413248
Stats 1768.0: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5362 bytes_read=6323 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=282 retransmit_seq=2 srtt=0.003 rttvar=0.004 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=168002879 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=42.3 mcu_temp: temp=25.8  sysload=0.59 cputime=91.407 memavail=713788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1769.0: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5391 bytes_read=6481 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167998544 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=25.8  sysload=0.59 cputime=91.441 memavail=714168 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1770.0: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5397 bytes_read=6644 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997480 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=25.9  sysload=0.59 cputime=91.474 memavail=714200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1771.0: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5403 bytes_read=6821 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997218 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=25.8  sysload=0.59 cputime=91.506 memavail=714452 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1772.0: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5409 bytes_read=6969 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997009 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=25.8  sysload=0.54 cputime=91.537 memavail=714464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1773.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5415 bytes_read=7147 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=25.8  sysload=0.54 cputime=91.569 memavail=714728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1774.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5421 bytes_read=7324 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996894 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=25.8  sysload=0.54 cputime=91.601 memavail=714728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 1775.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5427 bytes_read=7472 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997236 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.9  sysload=0.54 cputime=91.632 memavail=714728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1776.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5433 bytes_read=7635 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997176 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=25.9  sysload=0.54 cputime=91.664 memavail=715268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 1777.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5439 bytes_read=7812 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997347 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=26.0  sysload=0.50 cputime=91.695 memavail=716036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1778.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5445 bytes_read=7974 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997231 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=25.9  sysload=0.50 cputime=91.726 memavail=715788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1779.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5451 bytes_read=8137 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997190 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=26.0  sysload=0.50 cputime=91.758 memavail=716040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1780.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5457 bytes_read=8314 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997141 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=25.8  sysload=0.50 cputime=91.790 memavail=715788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1781.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5463 bytes_read=8462 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997107 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=25.9  sysload=0.50 cputime=91.821 memavail=716040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1782.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5469 bytes_read=8625 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997081 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=25.8  sysload=0.86 cputime=91.855 memavail=716052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1783.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5475 bytes_read=8816 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997054 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=42.3 mcu_temp: temp=25.8  sysload=0.86 cputime=91.887 memavail=716052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1784.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5481 bytes_read=8964 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997125 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=26.2  sysload=0.86 cputime=91.918 memavail=715812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1785.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5487 bytes_read=9127 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997117 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=25.9  sysload=0.86 cputime=91.950 memavail=716064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1786.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5493 bytes_read=9304 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997106 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=26.0  sysload=0.86 cputime=91.982 memavail=716848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1787.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5499 bytes_read=9452 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997086 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=25.8  sysload=0.79 cputime=92.014 memavail=716100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1788.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5505 bytes_read=9622 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997079 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=42.2 mcu_temp: temp=25.8  sysload=0.79 cputime=92.046 memavail=716352 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1789.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5511 bytes_read=9789 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997073 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=42.0 mcu_temp: temp=25.9  sysload=0.79 cputime=92.080 memavail=716352 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1790.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5517 bytes_read=9937 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997094 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=25.8  sysload=0.79 cputime=92.112 memavail=716360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1791.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5523 bytes_read=10100 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997082 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=25.8  sysload=0.79 cputime=92.144 memavail=716360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1792.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5529 bytes_read=10277 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997071 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=25.9  sysload=0.73 cputime=92.178 memavail=716368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1793.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5535 bytes_read=10439 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997063 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.7  sysload=0.73 cputime=92.210 memavail=716368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1794.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5541 bytes_read=10602 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997052 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=25.8  sysload=0.73 cputime=92.242 memavail=716652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1795.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5547 bytes_read=10779 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997048 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=26.0  sysload=0.73 cputime=92.273 memavail=716652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1796.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5553 bytes_read=10927 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997049 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=25.8  sysload=0.73 cputime=92.305 memavail=717156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1797.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5559 bytes_read=11090 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997043 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.9  sysload=0.67 cputime=92.337 memavail=717412 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1798.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5565 bytes_read=11281 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997044 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=25.8  sysload=0.67 cputime=92.368 memavail=717548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1799.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5571 bytes_read=11429 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997044 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=25.8  sysload=0.67 cputime=92.399 memavail=717804 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1800.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5577 bytes_read=11592 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997047 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=25.9  sysload=0.67 cputime=92.431 memavail=717808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1801.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5583 bytes_read=11769 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997044 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=25.9  sysload=0.67 cputime=92.463 memavail=717556 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1802.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5589 bytes_read=11917 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997045 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.9  sysload=0.62 cputime=92.494 memavail=717000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1803.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5601 bytes_read=12110 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997057 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.7 mcu_temp: temp=25.9  sysload=0.62 cputime=92.527 memavail=717060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1804.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5607 bytes_read=12287 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997051 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=25.9  sysload=0.62 cputime=92.559 memavail=717312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1805.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5613 bytes_read=12435 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997055 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=25.7  sysload=0.62 cputime=92.591 memavail=716940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1806.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5619 bytes_read=12598 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997055 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=26.0  sysload=0.62 cputime=92.624 memavail=716440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1807.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5625 bytes_read=12775 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997056 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=26.0  sysload=0.57 cputime=92.657 memavail=715432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1808.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5631 bytes_read=12937 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997055 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.6 mcu_temp: temp=26.0  sysload=0.57 cputime=92.689 memavail=715440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1809.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5637 bytes_read=13100 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997055 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.9  sysload=0.57 cputime=92.721 memavail=715440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1810.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5643 bytes_read=13277 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997056 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=26.0  sysload=0.57 cputime=92.750 memavail=715188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1811.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5649 bytes_read=13425 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997058 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=26.0  sysload=0.57 cputime=92.781 memavail=714660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1812.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5655 bytes_read=13588 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997060 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.0 mcu_temp: temp=25.8  sysload=0.52 cputime=92.814 memavail=714952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1813.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5661 bytes_read=13776 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997071 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.9  sysload=0.52 cputime=92.849 memavail=713952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1814.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5667 bytes_read=13914 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997067 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.9  sysload=0.52 cputime=92.881 memavail=714224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1815.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5673 bytes_read=14072 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997066 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.2 mcu_temp: temp=25.8  sysload=0.52 cputime=92.913 memavail=714232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1816.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5679 bytes_read=14249 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997071 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=25.9  sysload=0.52 cputime=92.947 memavail=715280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1817.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5685 bytes_read=14397 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997072 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.9  sysload=0.48 cputime=92.979 memavail=715028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 1818.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5691 bytes_read=14574 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997074 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.8 mcu_temp: temp=25.9  sysload=0.48 cputime=93.013 memavail=714812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1819.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5697 bytes_read=14751 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997073 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.5 mcu_temp: temp=25.8  sysload=0.48 cputime=93.049 memavail=714832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1820.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5703 bytes_read=14899 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997072 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.1 mcu_temp: temp=25.8  sysload=0.48 cputime=93.083 memavail=715088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1821.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5709 bytes_read=15062 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997073 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=25.9  sysload=0.48 cputime=93.117 memavail=715340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 1822.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5715 bytes_read=15239 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997071 heater_bed: target=0 temp=21.3 pwm=0.000 raspberry_pi: temp=41.4 mcu_temp: temp=25.9  sysload=0.44 cputime=93.152 memavail=715340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 2309.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8770 bytes_read=95721 bytes_retransmit=9 bytes_invalid=0 send_seq=843 receive_seq=842 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=167997101 heater_bed: target=0 temp=21.4 pwm=0.000 raspberry_pi: temp=42.0 mcu_temp: temp=26.2  sysload=0.30 cputime=108.491 memavail=715148 print_time=547.959 buffer_time=0.904 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473720413248: Disconnected
Restarting printer
Start printer at Fri May 19 13:44:09 2023 (1684503850.0 2311.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
min_temp = 10
max_temp = 100
sensor_type = temperature_host

[temperature_fan raspberry_pi]
pin = PG19
max_power = 0.4
shutdown_speed = 0.0
control = watermark
max_delta = 5.0
sensor_raspberry_pi = raspberry_pi
min_temp = 0
max_temp = 100
target_temp = 50.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 279, in setup_sensor
    sensor_type = config.get('sensor_type')
  File "/home/biqu/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/biqu/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'sensor_type' in section 'temperature_fan raspberry_pi' must be specified
webhooks client 281473726897168: New connection
webhooks client 281473726897168: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-200-g7511151a'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri May 19 13:17:29 2023 (1684502249.4 36.1)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_sensor raspberry_pi]
min_temp = 10
max_temp = 100
sensor_type = temperature_host

[temperature_fan raspberry_pi]
pin = PG19
max_power = 0.4
shutdown_speed = 0.0
control = watermark
max_delta = 5.0
sensor_raspberry_pi = raspberry_pi
min_temp = 0
max_temp = 100
target_temp = 50.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 21, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/biqu/klipper/klippy/extras/heaters.py", line 279, in setup_sensor
    sensor_type = config.get('sensor_type')
  File "/home/biqu/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/biqu/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'sensor_type' in section 'temperature_fan raspberry_pi' must be specified
webhooks client 281473236827200: New connection
webhooks client 281473236827200: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473236827200: Disconnected
Restarting printer
Start printer at Fri May 19 13:53:49 2023 (1684504429.7 99.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_fan raspberry_pi]
pin = PC8
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473161426784: New connection
webhooks client 281473161426784: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 281473161426784
webhooks: registering remote method 'reboot_machine' for connection id: 281473161426784
webhooks: registering remote method 'pause_job_queue' for connection id: 281473161426784
webhooks: registering remote method 'start_job_queue' for connection id: 281473161426784
Stats 132.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000026 bytes_write=5640 bytes_read=10884 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996874 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=26.4  sysload=0.99 cputime=8.676 memavail=720668 print_time=135.318 buffer_time=0.176 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473161426784: Disconnected
Restarting printer
Start printer at Fri May 19 13:54:24 2023 (1684504464.4 134.2)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_fan raspberry_pi]
pin = PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473160832816: New connection
webhooks client 281473160832816: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
webhooks client 281473160832816: Disconnected
Restarting printer
Start printer at Fri May 19 13:56:19 2023 (1684504579.5 249.3)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[temperature_fan raspberry_pi]
pin = PB6
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 17, in __init__
    self.fan = fan.Fan(config, default_shutdown_speed=1.)
  File "/home/biqu/klipper/klippy/extras/fan.py", line 27, in __init__
    self.mcu_fan = ppins.setup_pin('pwm', config.get('pin'))
  File "/home/biqu/klipper/klippy/pins.py", line 117, in setup_pin
    pin_params = self.lookup_pin(pin_desc, can_invert, can_pullup)
  File "/home/biqu/klipper/klippy/pins.py", line 106, in lookup_pin
    raise error("pin %s used multiple times in config" % (pin,))
pins.error: pin PB6 used multiple times in config
webhooks client 281473161332624: New connection
webhooks client 281473161332624: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473161332624: Disconnected
Restarting printer
Start printer at Fri May 19 13:56:57 2023 (1684504617.6 287.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PB6
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473143735536: New connection
webhooks client 281473143735536: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 291.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=4762 bytes_read=6077 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=258 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=487 upcoming_bytes=80 freq=168087384 heater_bed: target=0 temp=0.0 pwm=0.000 mcu_temp: temp=0.0  sysload=0.54 cputime=17.471 memavail=723788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473143735536
webhooks: registering remote method 'reboot_machine' for connection id: 281473143735536
webhooks: registering remote method 'pause_job_queue' for connection id: 281473143735536
webhooks: registering remote method 'start_job_queue' for connection id: 281473143735536
Stats 292.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5410 bytes_read=6321 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.003 rttvar=0.004 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=168015563 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.0  sysload=0.54 cputime=17.530 memavail=723928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 293.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5447 bytes_read=6494 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=168001564 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.1  sysload=0.54 cputime=17.580 memavail=723928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 294.1: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5453 bytes_read=6688 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167998423 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.0  sysload=0.54 cputime=17.612 memavail=723928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 295.1: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5459 bytes_read=6836 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997769 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.3  sysload=0.54 cputime=17.643 memavail=723704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 296.1: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5465 bytes_read=6999 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997158 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.2  sysload=0.50 cputime=17.674 memavail=723708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 297.1: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5471 bytes_read=7176 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996986 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.2  sysload=0.50 cputime=17.708 memavail=723688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 298.1: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5477 bytes_read=7324 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996888 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.4  sysload=0.50 cputime=17.738 memavail=723948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 299.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5483 bytes_read=7499 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996791 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.2  sysload=0.50 cputime=17.769 memavail=723508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 300.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5489 bytes_read=7664 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996786 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.4  sysload=0.50 cputime=17.801 memavail=723764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 301.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5495 bytes_read=7808 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.3  sysload=0.46 cputime=17.831 memavail=723512 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 302.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5501 bytes_read=7971 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=26.4  sysload=0.46 cputime=17.863 memavail=723028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 303.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5507 bytes_read=8148 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996918 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.2  sysload=0.46 cputime=17.897 memavail=723028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 304.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5513 bytes_read=8310 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.2  sysload=0.46 cputime=17.929 memavail=723288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 305.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5519 bytes_read=8473 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996929 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.2  sysload=0.46 cputime=17.960 memavail=723828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 306.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5525 bytes_read=8650 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996912 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.4  sysload=0.42 cputime=17.992 memavail=723576 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 307.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5531 bytes_read=8798 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996942 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.4  sysload=0.42 cputime=18.023 memavail=722340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 308.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5537 bytes_read=8961 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996944 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.4  sysload=0.42 cputime=18.055 memavail=722340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 649.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7665 bytes_read=65309 bytes_retransmit=9 bytes_invalid=0 send_seq=653 receive_seq=653 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997076 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.2  sysload=0.09 cputime=28.543 memavail=718588 print_time=401.270 buffer_time=0.361 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473143735536: Disconnected
Restarting printer
Start printer at Fri May 19 14:03:01 2023 (1684504981.0 650.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473143795776: New connection
webhooks client 281473143795776: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473143795776: Disconnected
Restarting printer
Start printer at Fri May 19 14:04:16 2023 (1684505056.9 726.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PB6
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473143847952: New connection
webhooks client 281473143847952: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 730.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=4762 bytes_read=6077 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=258 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=502 upcoming_bytes=65 freq=168073456 heater_bed: target=0 temp=0.0 pwm=0.000 mcu_temp: temp=0.0  sysload=0.21 cputime=34.871 memavail=717300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473143847952
webhooks: registering remote method 'reboot_machine' for connection id: 281473143847952
webhooks: registering remote method 'pause_job_queue' for connection id: 281473143847952
webhooks: registering remote method 'start_job_queue' for connection id: 281473143847952
Stats 731.4: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5388 bytes_read=6328 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=168011496 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.7  sysload=0.27 cputime=34.929 memavail=717348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 732.4: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5437 bytes_read=6486 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167999531 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.27 cputime=34.977 memavail=717372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 733.4: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5443 bytes_read=6649 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997189 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.27 cputime=35.008 memavail=717872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 734.4: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5449 bytes_read=6826 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996611 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.27 cputime=35.040 memavail=717876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 735.4: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000062 mcu_task_stddev=0.000204 bytes_write=5455 bytes_read=6974 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996397 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.27 cputime=35.070 memavail=718124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 736.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5461 bytes_read=7152 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996327 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.25 cputime=35.102 memavail=717400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 737.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5467 bytes_read=7329 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996380 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.7  sysload=0.25 cputime=35.134 memavail=717660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 738.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5473 bytes_read=7477 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996449 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.25 cputime=35.165 memavail=717888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 739.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5479 bytes_read=7640 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996474 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.25 cputime=35.196 memavail=717940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 740.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5485 bytes_read=7817 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996521 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.25 cputime=35.227 memavail=717692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 741.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5491 bytes_read=7979 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996584 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.23 cputime=35.258 memavail=717472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 742.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5497 bytes_read=8142 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996619 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.23 cputime=35.292 memavail=717984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 743.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5503 bytes_read=8319 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996652 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.23 cputime=35.323 memavail=718240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 744.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5509 bytes_read=8467 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996705 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.6  sysload=0.23 cputime=35.355 memavail=718492 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 745.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5515 bytes_read=8630 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996717 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.23 cputime=35.386 memavail=718524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 746.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5521 bytes_read=8821 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996770 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.21 cputime=35.417 memavail=717588 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 747.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5527 bytes_read=8969 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996774 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.21 cputime=35.449 memavail=717600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 748.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5533 bytes_read=9132 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996793 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.21 cputime=35.480 memavail=717800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 749.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5539 bytes_read=9309 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996797 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.21 cputime=35.512 memavail=718112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 750.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5545 bytes_read=9457 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996801 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.21 cputime=35.542 memavail=717852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 751.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5551 bytes_read=9627 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996809 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=35.574 memavail=718156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 752.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5557 bytes_read=9794 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996830 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=35.605 memavail=717464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 753.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5563 bytes_read=9942 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996843 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.0  sysload=0.20 cputime=35.636 memavail=717564 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 754.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5569 bytes_read=10105 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996850 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.7  sysload=0.20 cputime=35.667 memavail=717592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 755.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5575 bytes_read=10282 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996858 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=35.698 memavail=718096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 756.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5581 bytes_read=10444 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996869 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.26 cputime=35.730 memavail=717900 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 757.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5587 bytes_read=10607 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996876 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.26 cputime=35.762 memavail=717608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 758.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5593 bytes_read=10784 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996898 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.26 cputime=35.796 memavail=717668 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 759.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5599 bytes_read=10932 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.26 cputime=35.826 memavail=718136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 760.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5605 bytes_read=11095 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996956 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.26 cputime=35.857 memavail=718680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 761.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5611 bytes_read=11286 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.8  sysload=0.24 cputime=35.888 memavail=717744 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 762.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5617 bytes_read=11434 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.24 cputime=35.919 memavail=718512 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 763.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5623 bytes_read=11597 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996998 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.24 cputime=35.950 memavail=718712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 764.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5629 bytes_read=11774 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.24 cputime=35.981 memavail=718512 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 765.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5635 bytes_read=11922 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.8  sysload=0.24 cputime=36.012 memavail=719524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 766.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5647 bytes_read=12115 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997021 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.22 cputime=36.045 memavail=718836 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 767.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5653 bytes_read=12292 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997014 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.1  sysload=0.22 cputime=36.076 memavail=719140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 768.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5659 bytes_read=12440 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.0  sysload=0.22 cputime=36.107 memavail=718916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 769.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5665 bytes_read=12603 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.22 cputime=36.138 memavail=718916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 770.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5671 bytes_read=12780 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.0  sysload=0.22 cputime=36.169 memavail=719168 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 771.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5677 bytes_read=12942 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=36.200 memavail=719916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 772.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5683 bytes_read=13105 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=36.231 memavail=719376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 773.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5689 bytes_read=13282 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=36.263 memavail=719184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 774.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5695 bytes_read=13430 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=36.293 memavail=719308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 775.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5701 bytes_read=13593 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.0  sysload=0.20 cputime=36.325 memavail=719884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 776.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5707 bytes_read=13781 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.8  sysload=0.27 cputime=36.357 memavail=718692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 777.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5713 bytes_read=13919 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997003 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.27 cputime=36.387 memavail=718444 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 778.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5719 bytes_read=14077 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.27 cputime=36.419 memavail=718700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 779.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5725 bytes_read=14254 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.27 cputime=36.450 memavail=718700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 780.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5731 bytes_read=14402 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.27 cputime=36.480 memavail=718200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 781.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5737 bytes_read=14579 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.48 cputime=36.511 memavail=718000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 782.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5743 bytes_read=14756 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997020 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.9  sysload=0.48 cputime=36.542 memavail=718004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 783.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5749 bytes_read=14904 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.1  sysload=0.48 cputime=36.573 memavail=718264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 784.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5755 bytes_read=15067 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997028 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.0  sysload=0.48 cputime=36.604 memavail=718264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 785.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5761 bytes_read=15244 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997025 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.0  sysload=0.48 cputime=36.635 memavail=718772 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 901.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6482 bytes_read=34420 bytes_retransmit=9 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997088 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.1  sysload=0.19 cputime=40.359 memavail=716476 print_time=176.448 buffer_time=0.774 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473143847952: Disconnected
Restarting printer
Start printer at Fri May 19 14:07:13 2023 (1684505233.6 903.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 17, in __init__
    self.fan = fan.Fan(config, default_shutdown_speed=1.)
  File "/home/biqu/klipper/klippy/extras/fan.py", line 27, in __init__
    self.mcu_fan = ppins.setup_pin('pwm', config.get('pin'))
  File "/home/biqu/klipper/klippy/pins.py", line 117, in setup_pin
    pin_params = self.lookup_pin(pin_desc, can_invert, can_pullup)
  File "/home/biqu/klipper/klippy/pins.py", line 98, in lookup_pin
    pin_params = self.parse_pin(pin_desc, can_invert, can_pullup)
  File "/home/biqu/klipper/klippy/pins.py", line 83, in parse_pin
    raise error("Unknown pin chip name '%s'" % (chip_name,))
pins.error: Unknown pin chip name 'host'
webhooks client 281473232348832: New connection
webhooks client 281473232348832: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473232348832: Disconnected
Restarting printer
Start printer at Fri May 19 14:08:01 2023 (1684505281.7 951.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:raspberry_pi/PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/biqu/klipper/klippy/extras/temperature_fan.py", line 17, in __init__
    self.fan = fan.Fan(config, default_shutdown_speed=1.)
  File "/home/biqu/klipper/klippy/extras/fan.py", line 27, in __init__
    self.mcu_fan = ppins.setup_pin('pwm', config.get('pin'))
  File "/home/biqu/klipper/klippy/pins.py", line 117, in setup_pin
    pin_params = self.lookup_pin(pin_desc, can_invert, can_pullup)
  File "/home/biqu/klipper/klippy/pins.py", line 98, in lookup_pin
    pin_params = self.parse_pin(pin_desc, can_invert, can_pullup)
  File "/home/biqu/klipper/klippy/pins.py", line 83, in parse_pin
    raise error("Unknown pin chip name '%s'" % (chip_name,))
pins.error: Unknown pin chip name 'host'
webhooks client 281473236355296: New connection
webhooks client 281473236355296: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
webhooks client 281473236355296: Disconnected
Restarting printer
Start printer at Fri May 19 14:08:18 2023 (1684505299.0 968.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = raspberry_pi/PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473143710480: New connection
webhooks client 281473143710480: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'raspberry_pi/PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'raspberry_pi/PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
webhooks client 281473143710480: Disconnected
Restarting printer
Start printer at Fri May 19 14:10:19 2023 (1684505419.7 1089.6)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473161512080: New connection
webhooks client 281473161512080: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
webhooks client 281473161512080: Disconnected
Restarting printer
Start printer at Fri May 19 14:11:58 2023 (1684505518.7 1188.6)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[mcu host]
serial = /tmp/klipper_host_mcu

[temperature_fan raspberry_pi]
pin = PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473143754816: New connection
webhooks client 281473143754816: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-122-ge6ef48cd / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
MCU 'mcu' shutdown: oids already allocated
clocksync state: mcu_freq=168000000 last_clock=17327255322 clock_est=(1191.425 17265717515 167998765.100) min_half_rtt=0.000190 min_rtt_time=1191.516 time_avg=1191.424(0.019) clock_avg=17265717515.048(3210861.978) pred_variance=20803374085.652
Dumping serial stats: bytes_write=866 bytes_read=4296 bytes_retransmit=9 bytes_invalid=0 send_seq=105 receive_seq=99 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 1191.143526 1191.143526 8: seq: 11, identify offset=0 count=40
Sent 1 1191.180521 1191.180521 8: seq: 18, identify offset=0 count=40
Sent 2 1191.182543 1191.182543 8: seq: 19, identify offset=40 count=40
Sent 3 1191.184600 1191.184600 8: seq: 1a, identify offset=80 count=40
Sent 4 1191.186530 1191.186530 9: seq: 1b, identify offset=120 count=40
Sent 5 1191.188603 1191.188603 9: seq: 1c, identify offset=160 count=40
Sent 6 1191.190534 1191.190534 9: seq: 1d, identify offset=200 count=40
Sent 7 1191.192605 1191.192605 9: seq: 1e, identify offset=240 count=40
Sent 8 1191.194539 1191.194539 9: seq: 1f, identify offset=280 count=40
Sent 9 1191.196602 1191.196602 9: seq: 10, identify offset=320 count=40
Sent 10 1191.198541 1191.198541 9: seq: 11, identify offset=360 count=40
Sent 11 1191.200608 1191.200608 9: seq: 12, identify offset=400 count=40
Sent 12 1191.202531 1191.202531 9: seq: 13, identify offset=440 count=40
Sent 13 1191.204625 1191.204625 9: seq: 14, identify offset=480 count=40
Sent 14 1191.206545 1191.206545 9: seq: 15, identify offset=520 count=40
Sent 15 1191.208744 1191.208744 9: seq: 16, identify offset=560 count=40
Sent 16 1191.210552 1191.210552 9: seq: 17, identify offset=600 count=40
Sent 17 1191.212617 1191.212617 9: seq: 18, identify offset=640 count=40
Sent 18 1191.214534 1191.214534 9: seq: 19, identify offset=680 count=40
Sent 19 1191.216611 1191.216611 9: seq: 1a, identify offset=720 count=40
Sent 20 1191.218537 1191.218537 9: seq: 1b, identify offset=760 count=40
Sent 21 1191.220599 1191.220599 9: seq: 1c, identify offset=800 count=40
Sent 22 1191.222539 1191.222539 9: seq: 1d, identify offset=840 count=40
Sent 23 1191.224608 1191.224608 9: seq: 1e, identify offset=880 count=40
Sent 24 1191.226538 1191.226538 9: seq: 1f, identify offset=920 count=40
Sent 25 1191.228600 1191.228600 9: seq: 10, identify offset=960 count=40
Sent 26 1191.230551 1191.230551 9: seq: 11, identify offset=1000 count=40
Sent 27 1191.232615 1191.232615 9: seq: 12, identify offset=1040 count=40
Sent 28 1191.234546 1191.234546 9: seq: 13, identify offset=1080 count=40
Sent 29 1191.236615 1191.236615 9: seq: 14, identify offset=1120 count=40
Sent 30 1191.238542 1191.238542 9: seq: 15, identify offset=1160 count=40
Sent 31 1191.240608 1191.240608 9: seq: 16, identify offset=1200 count=40
Sent 32 1191.242555 1191.242555 9: seq: 17, identify offset=1240 count=40
Sent 33 1191.244615 1191.244615 9: seq: 18, identify offset=1280 count=40
Sent 34 1191.246559 1191.246559 9: seq: 19, identify offset=1320 count=40
Sent 35 1191.248620 1191.248620 9: seq: 1a, identify offset=1360 count=40
Sent 36 1191.250533 1191.250533 9: seq: 1b, identify offset=1400 count=40
Sent 37 1191.252615 1191.252615 9: seq: 1c, identify offset=1440 count=40
Sent 38 1191.254552 1191.254552 9: seq: 1d, identify offset=1480 count=40
Sent 39 1191.256614 1191.256614 9: seq: 1e, identify offset=1520 count=40
Sent 40 1191.258557 1191.258557 9: seq: 1f, identify offset=1560 count=40
Sent 41 1191.260605 1191.260605 9: seq: 10, identify offset=1600 count=40
Sent 42 1191.262724 1191.262724 9: seq: 11, identify offset=1640 count=40
Sent 43 1191.264622 1191.264622 9: seq: 12, identify offset=1680 count=40
Sent 44 1191.266555 1191.266555 9: seq: 13, identify offset=1720 count=40
Sent 45 1191.268612 1191.268612 9: seq: 14, identify offset=1760 count=40
Sent 46 1191.270741 1191.270741 9: seq: 15, identify offset=1800 count=40
Sent 47 1191.273047 1191.273047 9: seq: 16, identify offset=1840 count=40
Sent 48 1191.274668 1191.274668 9: seq: 17, identify offset=1880 count=40
Sent 49 1191.276614 1191.276614 9: seq: 18, identify offset=1920 count=40
Sent 50 1191.278548 1191.278548 9: seq: 19, identify offset=1960 count=40
Sent 51 1191.280612 1191.280612 9: seq: 1a, identify offset=2000 count=40
Sent 52 1191.282558 1191.282558 9: seq: 1b, identify offset=2040 count=40
Sent 53 1191.284617 1191.284617 9: seq: 1c, identify offset=2080 count=40
Sent 54 1191.286554 1191.286554 9: seq: 1d, identify offset=2120 count=40
Sent 55 1191.288610 1191.288610 9: seq: 1e, identify offset=2160 count=40
Sent 56 1191.290552 1191.290552 9: seq: 1f, identify offset=2200 count=40
Sent 57 1191.292619 1191.292619 9: seq: 10, identify offset=2240 count=40
Sent 58 1191.294552 1191.294552 9: seq: 11, identify offset=2280 count=40
Sent 59 1191.296596 1191.296596 9: seq: 12, identify offset=2320 count=40
Sent 60 1191.298549 1191.298549 9: seq: 13, identify offset=2360 count=40
Sent 61 1191.300618 1191.300618 9: seq: 14, identify offset=2400 count=40
Sent 62 1191.302545 1191.302545 9: seq: 15, identify offset=2440 count=40
Sent 63 1191.304615 1191.304615 9: seq: 16, identify offset=2480 count=40
Sent 64 1191.306554 1191.306554 9: seq: 17, identify offset=2520 count=40
Sent 65 1191.308764 1191.308764 9: seq: 18, identify offset=2560 count=40
Sent 66 1191.310563 1191.310563 9: seq: 19, identify offset=2600 count=40
Sent 67 1191.312613 1191.312613 9: seq: 1a, identify offset=2640 count=40
Sent 68 1191.314557 1191.314557 9: seq: 1b, identify offset=2680 count=40
Sent 69 1191.316611 1191.316611 9: seq: 1c, identify offset=2720 count=40
Sent 70 1191.318556 1191.318556 9: seq: 1d, identify offset=2760 count=40
Sent 71 1191.320617 1191.320617 9: seq: 1e, identify offset=2800 count=40
Sent 72 1191.322550 1191.322550 9: seq: 1f, identify offset=2840 count=40
Sent 73 1191.324608 1191.324608 9: seq: 10, identify offset=2880 count=40
Sent 74 1191.326544 1191.326544 9: seq: 11, identify offset=2920 count=40
Sent 75 1191.328618 1191.328618 9: seq: 12, identify offset=2960 count=40
Sent 76 1191.330551 1191.330551 9: seq: 13, identify offset=3000 count=40
Sent 77 1191.332608 1191.332608 9: seq: 14, identify offset=3012 count=40
Sent 78 1191.351668 1191.351668 6: seq: 15, get_uptime
Sent 79 1191.411066 1191.411066 6: seq: 16, get_clock
Sent 80 1191.463266 1191.463266 6: seq: 17, get_clock
Sent 81 1191.516192 1191.516192 6: seq: 18, get_clock
Sent 82 1191.569386 1191.569386 6: seq: 19, get_clock
Sent 83 1191.621985 1191.621985 6: seq: 1a, get_clock
Sent 84 1191.673916 1191.673916 6: seq: 1b, get_clock
Sent 85 1191.725964 1191.725964 6: seq: 1c, get_clock
Sent 86 1191.778250 1191.778250 6: seq: 1d, get_clock
Sent 87 1191.790621 1191.790621 6: seq: 1e, get_clock
Sent 88 1192.421677 1192.421677 12: seq: 1f, debug_read order=1 addr=536836652
Sent 89 1192.423799 1192.423799 12: seq: 10, debug_read order=1 addr=536836654
Sent 90 1192.426089 1192.426089 6: seq: 11, get_config
Sent 91 1192.433235 1192.433235 7: seq: 12, allocate_oids count=28
Sent 92 1192.433813 1192.433813 12: seq: 13, config_tmcuart oid=0 rx_pin=PD6 pull_up=0 tx_pin=PD6 bit_time=4200
Sent 93 1192.434112 1192.434112 12: seq: 14, config_tmcuart oid=1 rx_pin=PD1 pull_up=0 tx_pin=PD1 bit_time=4200
Sent 94 1192.434250 1192.434250 12: seq: 15, config_tmcuart oid=2 rx_pin=PD15 pull_up=0 tx_pin=PD15 bit_time=4200
Sent 95 1192.434373 1192.434373 12: seq: 16, config_tmcuart oid=3 rx_pin=PD11 pull_up=0 tx_pin=PD11 bit_time=4200
Sent 96 1192.434493 1192.434493 8: seq: 17, config_analog_in oid=15 pin=PA1
Sent 97 1192.434632 1192.434632 15: seq: 18, config_digital_out oid=16 pin=PB4 value=0 default_value=0 max_duration=840000000
Sent 98 1192.435163 1192.435163 11: seq: 19, set_digital_out_pwm_cycle oid=16 cycle_ticks=16800000
Sent 99 1192.440567 1192.440567 11: seq: 1a, config_digital_out oid=17 pin=PB6 value=0 default_value=1 max_duration=0
Dumping receive queue 91 messages
Receive: 0 1191.181507 1191.180521 48: seq: 19, identify_response offset=0 data=b'x\xda\xa5Z{o\xe4\xb6\x11\xff*\xec\x02A\x93\xc6k\xac\xa4}\x1a\xc8\x1f\xf6\x9e\x93;\xb4N\x9c\xb3\xaf-\x10\x04\x82,qw\x89'
Receive: 1 1191.183512 1191.182543 48: seq: 1a, identify_response offset=40 data=b'\xd3+\xa2\xe4G\x03\x7f\xf7\xce\x83\xa4(\xed\xfa\x12\xb4\x05\xae\x1693|\xcc\x0c\x7f\xf3\xd8\xfc>y\xe8T\x9e\xc5\x8f\xb2\xd1\xaa*\xf5'
Receive: 2 1191.185516 1191.184600 48: seq: 1b, identify_response offset=80 data=b'\xe4b\xb2O\xd3\x0b\xf1u\xb0\xb8XO\xc3Y\xb0\x99\xfe\x16M\x83o\x1f\x82o\xc4\xfa<:\x0f\x04\xce\xcdV\xb3H|\xdd\xc8\\&'
Receive: 3 1191.187513 1191.186530 49: seq: 1c, identify_response offset=120 data=b'Z~#~\x01\x91\xe9z\xfa\xd0$ez\x10\x8d|T\xb8\x96\x08W\xd1,\\\xfd*\x1eT\xd9\xb5*\xd7\xb0jx\x1e-\xce\xc3i'
Receive: 4 1191.189513 1191.188603 49: seq: 1d, identify_response offset=160 data=b'\xf8m0\xff\xf6!\xfcF\xf0xr6I\xab\xa2H\xca\x0c\xf6\xff}\x92\xe4y\x95&\xad\x8c+\x95i\x91V]\xd9~\xf7U:\xb9'
Receive: 5 1191.191513 1191.190534 49: seq: 1e, identify_response offset=200 data=b"X\x9f\xc1a\xdb\x16N\x19'\xe9g\x01T\x98\xf6\xe8\xab\xd0c\xc82\xcbPW\x9a\xfe\xa8\xf2\xbb\xaf:Qwy\x1ew5\x0b\xcc{"
Receive: 6 1191.193515 1191.192605 49: seq: 1f, identify_response offset=240 data=b'\x81\xdf:\xd9\xbc\xb85\xe1\x00\x9f\x91\xbb\x91\xba\x8d[\x95~\xd6<j\xe1\x8a\xbaPmlw\x15\xaa\x04\xd5\x99\xfd#\xb8\x07\xa8\xa4\x89'
Receive: 7 1191.195511 1191.194539 49: seq: 10, identify_response offset=280 data=b'\xf5\xa1k\xb3\xea\xa9\x9c\\\x84x\xb5r\xa7\xf6p\xa2\xe7<\x9a/\xec\x16\xbaV1\x7fN.\x16\x9b\x9e\xabL\xf2j\x1f\xab\xd2\x9d\x9e'
Receive: 8 1191.197513 1191.196602 49: seq: 11, identify_response offset=320 data=b'\x8e=\xb9\x88\xfa\x95\xcc\x91-\x07\x0fcO\x0f\x0b\xc7J\x93\xb2\x19.6\xd0\xc1\xba_7S{\xd5&y\\u\xedH\xe01\xc9;'
Receive: 9 1191.199511 1191.198541 49: seq: 12, identify_response offset=360 data=b'\x89\xe3L\xee\x92.oc7Q$\xcfq\xd65I\x0b\x06\xa7s\x06+\xb7\x9e\x04{\xb6U=X+\x1dl\x1e.\x1d\xf3!\x9b\xcf'
Receive: 10 1191.201513 1191.200608 49: seq: 13, identify_response offset=400 data=b'W\xeb\x99entl\xf6\x96\xf6#\x9b\xbb\xaf\x85\xfbZ\xba\xaf\x95\xfb\x92y\xf2\xe2\x8c\x06\xea\x08\xdc&*L\xed\x06\xf0\t\x8ad\xb3'
Receive: 11 1191.203511 1191.202531 49: seq: 14, identify_response offset=440 data=b'\x82\xaf\xe1_\xf0\x19\xb07\x0b-z\xb5\x14u\xb7\t\x173_\xd0\x1an\xd9k\xba\x94U\xad\x9ee>\xd2\\\x96\xb4I\xac\xd5\x7f`'
Receive: 12 1191.205515 1191.204625 49: seq: 15, identify_response offset=480 data=b'\x83C\x07/\xa1\x8dQc\x9eGi\tS\xaa\xf4\xce\xbb\x9e\xb9E\xeb\xa7\xe2\x845\xd2\x17\xf0\xb2~\rc\x8bC7\xb6\x0e\xcc\x1c\x99'
Receive: 13 1191.207510 1191.206545 49: seq: 16, identify_response offset=520 data=b'g\xd1\x9fXg\xaar>\x84\x0e\xcf\xc7\x04\xa6\xf9\xbag\xaa\xd5xw|}\xadz\x94\xf1A\xed\x0f\xa4\x86h\xc0\x0f>\xbc\xcf\xe5\xb1'
Receive: 14 1191.209513 1191.208744 49: seq: 17, identify_response offset=560 data=b"\x9f\x0bG\x8b\xdb\x97Z\xb2\x02\xc3\x81\xa4}7\xa7\x84\r).\xf4\xfe\xbb\xaf\xfe\x06@\x11E\x03\xd9'\xd5\x1e@Wqj\x1f\x06p"
Receive: 15 1191.211513 1191.210552 49: seq: 18, identify_response offset=600 data=b'\xf4\xbe\xa8\xdb\xd5&t6L\x9dw\xe94\xff\xec\xbeU\xe6>_\xca4\x1e:\x92H\x8b,\x1e\xfb\xd6\xd2\xbby+\xeb\xba\x7fj8'
Receive: 16 1191.213513 1191.212617 49: seq: 19, identify_response offset=640 data=b'\x8c\x8d\xcbg\xaa\xb1\x9f\x0c\x17\xc4\xdcsu\xb9\x96\xde\xa2a\x7f\xb1\xf6 \x9b\xa2\x82W\\\x9f\xd4\xa8O\xee\x95:\xef\x1d\xa8-\xd2.'
Receive: 17 1191.215512 1191.214534 49: seq: 1a, identify_response offset=680 data=b"i\x9c\x035\xcf\xf1\x11\x04\x88\xd6M\xa2{\xb6\xaa`'X\xf5\xcak\x1b\xd4G\xafVX?\x93\x0f\x1d8}UO.6v\x04\xab"
Receive: 18 1191.217511 1191.216611 49: seq: 1b, identify_response offset=720 data=b'\xec\xc9\xe1\xd9>\x81ckd\x02h\xdcd\xb2\xc1\xfd\xf0\x991T\x84\x96\xe1\xa9Q\xad<\xe2@\xcffFx\xc1\xb2\x90\xcd^\x96\xe9'
Receive: 19 1191.219510 1191.218537 49: seq: 1c, identify_response offset=760 data=b'K\x8c\x98\x02\x87\x80)\xc6\x97\xf8P\x15\xf2\x08\xb9uR\xd4\xfe+1c\x87\xdbCd\x87\xa3\xf7\x98\xc6\xd7u:n\xd4~/\x1b\xbc'
Receive: 20 1191.221514 1191.220599 49: seq: 1d, identify_response offset=800 data=b'\x84\xc6G\x84\xb0\xb5\xe87\xa7\xb8\x01gJZ\xe9\x14\x14B\\\xd9)@rxP1\xebP\xa4M\xca\x1es6\xd9\xc3\x93\xa7s\xc2'
Receive: 21 1191.223511 1191.222539 49: seq: 1e, identify_response offset=840 data=b's4#\xe2\x01\x9d\xf3\xb0\xab\xd1\n`\xc8\xb3\x89\x81\xc5X\xc3~1x\xa0C}\xfcf=\xaff#64\x81e\xeb\xcd\xb1\x04;'
Receive: 22 1191.225515 1191.224608 49: seq: 1f, identify_response offset=880 data=b'!v\x15U\xa6v/1\xd8\xda\xad\xd5HzR\xc2\x04/8\x01RYln\xc4\xd8\x86C~\x9c\x8bsi\x90e\xc6\x8c\xc6\x96\xe3'
Receive: 23 1191.227511 1191.226538 49: seq: 10, identify_response offset=920 data=b'\xed\x17`C\x95\xc9\xb2\x85\xcdE\xb5\xdb\xc1.\xf4\xa8\\\xd4\x02\xba\xc5P\xba\x86\xd3\xe6j\xedQ\xba:\xeb5\xcd\xa1\xfd\xd0y\xdb\xac'
Receive: 24 1191.229513 1191.228600 49: seq: 11, identify_response offset=960 data=b'\xe0\xb8l\x92Q\xbc=\x1d\xd2\xe1\\\xeb\x91\x00\xd9\xb2\xebAd\xb1r\x0c\xe3\xd8\xfc?:[\xd1;\x9b\x81\xe8~\x04\xf9\xc5\x1e\x04\x0f'
Receive: 25 1191.231513 1191.230551 49: seq: 12, identify_response offset=1000 data=b'2\xfd\xecE\xf4(\xb0g\x18\x05tw\x82\xba\x82\xf7<\xde\xdf\x8b)n\x81Q4{K-\xcb\xf9H`\xac\x96ed\x19\x8e \xff'
Receive: 26 1191.233515 1191.232615 49: seq: 13, identify_response offset=1040 data=b"\x8d\xec\t}\x1a\x10^\xed\xf8NKw\xa4S \xf7\xc6\x1a\x9e\xea\x06\x9a\xe3\x01\x80+\xbc\xb9\xccW\x1c\xbbC'O%7n\x8f\xca"
Receive: 27 1191.235514 1191.234546 49: seq: 14, identify_response offset=1080 data=b'\x0f\xbf\xc1\xc2\x8a\x8c\xa2\xafcw\xd6\x02\xe7\x98[fDr\x97"\xa0\x89\x18\xbc\xac\x83\x1f(\xbd\x80\xbf\n\xe0\x01p\x8f\x02?\xd8%'
Receive: 28 1191.237514 1191.236615 49: seq: 15, identify_response offset=1120 data=b'2\x9f$\xcf\xa80\xde\x0f\x04\xe0ia\xb4\xa6G8x\xde\x80\x02\x04\x98\xcd\xbe+$\xee\x83\xd1{>\xe6\x86Dg\xb7\xeb\x9d\xa6\x7f'
Receive: 29 1191.239510 1191.238542 49: seq: 16, identify_response offset=1160 data=b'}\xf4v1b\x84F\x84a\x86s\xf1\xb7\xf7\x10O\x89b\xfd\xce\x17N\xb0\xc5t\xca\xc5(\x9c\xe3\xf4\n\x98V\x1e\x93\xae\xa5\xcc\xfa'
Receive: 30 1191.241518 1191.240608 49: seq: 17, identify_response offset=1200 data=b'P\x06\x03\xe6Y\x1a\x1e\x82\x8f?\xbect\xc4\xfe\xe6%{p\x98\x83\xcb\xe1\x19|_\x18e\xb8`\xff\xe8\x88\x89<\x81\xb2.w\xa6'
Receive: 31 1191.243511 1191.242555 49: seq: 18, identify_response offset=1240 data=b'A\n\x06BK\x16*\xe5\xb31%\xc4|\x07\x82\xaa\xe1\xb0`\xb6\xb7~\xf5\x07\xe9\x1cx\x17\x1e\xa5O\x9a\xb0\xf6\xf0n\xe8A\xfb\x8c'
Receive: 32 1191.245519 1191.244615 49: seq: 19, identify_response offset=1280 data=b'\xf9<\xd8\xf4\xa8\xd1\xdcR\x87&\x82)\x93\x00CH\x90^"\x0c"\xcb^DW\xbb\xf6)i\xa4/[(]\xd9\xa4\xa1\xa8\xb4:'
Receive: 33 1191.247513 1191.246559 49: seq: 1a, identify_response offset=1320 data=b'\x95M\x1d-\xba0\x8b\xbe}\x8f\x08\xbd\x89\x12\xb5/\xc5\xbb\xe5j\xc8\xf5F\xb8\xc3\xdd8%\x8b1\xa6B\xa8P\x98\x05;\x00\x0b6'
Receive: 34 1191.249511 1191.248620 49: seq: 1b, identify_response offset=1360 data=b'=\x03ErD\x01\x8e\xf5\xc2\x85~/\x11\x00\t\x08\x15&\xa1\x1a\xa8\x9a|\xd0\x05D\x8eY\xb0\xbb\x91F\x1d"\xf4\x9d@\x12p\x89'
Receive: 35 1191.251513 1191.250533 49: seq: 1c, identify_response offset=1400 data=b'u\xcf\xd7\xfa\x89\x9a\xac\xab\xc6d\t\x8c\x824vN"\x9fk\x05&\xf1s\x92\x8d[it\x0b\x9f\tT\xc7\x11\xf4\x14\x1ezo`'
Receive: 36 1191.253516 1191.252615 49: seq: 1d, identify_response offset=1440 data=b'\xfej\x93?,\xc8/\xdfm\xe3\x9b\xcb\x7fcf\xb9\x01\x13]}\xba\x8bo?\xfcx\x87\xe5T0\xb9\x98\xdc^-\xcfn\xafV\x93'
Receive: 37 1191.255512 1191.254552 49: seq: 1e, identify_response offset=1480 data=b'\x11%!\xd2\x1aH\x9b\x11)$\n\xe4\x87\xf0\x7f\xc1\x98Fb\xef\xe7g\xb7\xef\x17#R\x84\x94KXp;^0b\xa1\x15\x08\xad'
Receive: 38 1191.257516 1191.256614 49: seq: 1f, identify_response offset=1520 data=b'}\x12B\x04R\xb6\x90j\xde\xbe\x83\x7f[\x92\x86\x7f\xb8\xf9v\xb89\xf8&\xdd\xe6\x12ns\tK].\xc6T\xbe\x11\x1c\xedj\x01'
Receive: 39 1191.259513 1191.258557 49: seq: 10, identify_response offset=1560 data=b'\xff\xa2\x11\xd9\xdc\n\xc9\x01\xd2\x83#\x06\x92\xdf\xe21"\xa4\xcf\xc6\xf4\x07\xa4\x7f\x00\xfa\x07\xa0\x7f\x18\x1f.\xfa\xe2\xee\xac\x02\xb8\xd2\x19'
Receive: 40 1191.261605 1191.260605 49: seq: 11, identify_response offset=1600 data=b"\xdfvK\xcbo\xff\xf1\xd3\xf6\xef\xf1\xf7\x1f\xaf\x7fF\x8cZ\xcf\xe8\x7fg\x93\x9b\xed'\xe0\xd6m\x11\x85\xbb\xf9l\xf5\xfc\x0c\xac\xb7\xff"
Receive: 41 1191.263518 1191.262724 49: seq: 12, identify_response offset=1640 data=b'\xbaa#\x87X#~\xbc\xbe\xbb\xfe\xf8\xcfk^\xfe\xd3\xdd\x15)\x06\x17\xbf\x0c\xb0]3 \xa7\xcd\x0b8oN&\x00\xb5\xbe\xc7\x83'
Receive: 42 1191.265513 1191.264622 49: seq: 13, identify_response offset=1680 data=b'\xdf\xdd_\xde\xdf\xc5w\x9fn\xee~\x8e\xaf.\xef\xaeq\xd9%N_\xdf\xde^\x7f\x8c\xaf~\xba\x7f\x1f_\xbf\xfb\x01\xe6\x83WL\xa6'
Receive: 43 1191.267509 1191.266555 49: seq: 14, identify_response offset=1720 data=b"\x01\xda\xb9J\xa5\x0e\x90)\xce\xcd'X\x85sK4@@_!uV\x8c\xbb\xcc\xe9+\xa2\x9a\xc08\xc3\x02\x16\x05\x1c\xb2\xce{\x7f"
Receive: 44 1191.269564 1191.268612 49: seq: 15, identify_response offset=1760 data=b'}\x03\xbb^\xde\x7f\xfaH\x07\x01\x81\xdb\xcb\xd9\xe4\xe2\x97\xd9Y\xb0\xfc\x15\x06W8\x00\x0c\xe7\xd1\x16GQhF\xefp\x04\x151\x8f'
Receive: 45 1191.271574 1191.270741 49: seq: 16, identify_response offset=1800 data=b'\xaeq\x04\xc9\x11\x8f\xbe\xc7\xd1\xda\xae\xf2\x03\x8e6v\x95\xf7\xb4f`\x97\xf9@\xc3\x90\xd6y5\xc1\xcb\\\x91\xbdt\xf6:\x00{('
Receive: 46 1191.273558 1191.273047 49: seq: 17, identify_response offset=1840 data=b'\xe6\xa8\x17\x16DQD\xf7O\xf4b6_e\xa4\x816\x97\x8bY\x80\xfe\x12\x1a)\xbb\x14\xf9p@s\xa8\xad\x90\xbeBZ\xc0x '
Receive: 47 1191.275511 1191.274668 49: seq: 18, identify_response offset=1880 data=b'\xc7\x14\x94e<\x8eH\x81\xc6\x83Po\x98\xe8)\xc4\xa3\x06\xea\xb9XeF\x89\x82\x90b\xc7\x19*\xb7n.s\x04\xbc\x17ak\x9d'
Receive: 48 1191.277514 1191.276614 49: seq: 19, identify_response offset=1920 data=b'\x8c\xa3\xe76)EY\xb5\x02\x90O`\xf4\x10\x10\xf08\xca\t\x020\xf1tP\xf0\xcd@\xa4E\rP\n;q\x9a\x03\xb2\x7fm1'
Receive: 49 1191.279512 1191.278548 49: seq: 1a, identify_response offset=1960 data=b'U\x82j|\x0f\xabB\x89\x9b\xb4Bi\x91\x98\xbd\xb8\xf7\xc05\x98a\xd6\xc8\x8a \xc6\x95"\xcfRVE9\'l\'Ka\xcbs'
Receive: 50 1191.281517 1191.280612 49: seq: 1b, identify_response offset=2000 data=b"'\x0f\xaa\xd9\x9aD\xa7N\x1a\r$\xd94UCE\x98%4\x12\x92;\xddR\xeb\xf1\xfb\x04\x0e\x9d\x89\xb6\x12\x84\xfd\xd8J\xc2:\x95"
Receive: 51 1191.283513 1191.282558 49: seq: 1c, identify_response offset=2040 data=b's\xa0\x0f\x9cy\nxD"=$e)s\xae\x88,\xc1\xf6\xec\xfa\x16"g\x86\x1c\xf4,\x97\xc9\xbc\xa8.\xec\xe7\x80\r\x8f\x98\x14'
Receive: 52 1191.285513 1191.284617 49: seq: 1d, identify_response offset=2080 data=b'\x12\xd2Jn\x0fXbQ=J{J\x81\xfd\x1b\xc4\xee\x9e\xec\x9aR\xae\r\xc5\xdd\x81#\xba)\xab\xdc\xfe\x987[&P\xac`w'
Receive: 53 1191.287510 1191.286554 49: seq: 1e, identify_response offset=2120 data=b"\xc4\x82\xdd\xceR\xf7\x88\xbcn\xee\xf1b\xbb\x88'\xd7\xc3I\x1bL0\x02y\xf3\xa6pH\x0f\xaa6{D\xde\xf1\x07\x85\x81\xc7\x83\xb1"
Receive: 54 1191.289512 1191.288610 49: seq: 1f, identify_response offset=2160 data=b'\xee&yFo\\[\xcdr\xb7\xe7Fj\x9d\xec\xa5\x90e\n\xe9\x87\xb5(\xb8\xea\x8d\xd2\x1a\xac\xa7\xa1\xb2\xca\xba\x1c\x1b\x15 \x8c\xd9'
Receive: 55 1191.291509 1191.290552 49: seq: 10, identify_response offset=2200 data=b'\x9a0\x81\x90\xdc[>J4\t&jo\x0b\x1c\x92&#\x976\xdc\xd8\x99\xbdA;P! \xe0\xab\xd9\xe5\xd5\x13W\x12?\xc2;'
Receive: 56 1191.293513 1191.292619 49: seq: 11, identify_response offset=2240 data=b'H\x04_\x07\x1f\x11\x81\x12f\xe8>\x01\xbd\x86\x08\xd8u\xf4\t\xaa\xac9O\xe4\xdc\x95H%\x9e\xb4\x9f\x0e\t\xb9\xdd\xf3\xa8\x9bj\x0f'
Receive: 57 1191.295509 1191.294552 49: seq: 12, identify_response offset=2280 data=b'\x9eR\xc0\xd1\x13\xbc\x1b\xa6\xc4pJ\xce\xb4\xb9\n\xff(\xcd\xa5\xd0\x9b\xe1}4\xb0\r\xaa\x1a|\x0c]\x1dS\xeb;\xc7p\xa4\x1d\xf1'
Receive: 58 1191.297513 1191.296596 49: seq: 13, identify_response offset=2320 data=b'\xa4\xf2\x1c\xf2\x8f\x14\xd3x\xbf\xbd\xc8\x19U/\xe94\xf4\x05\t\xack\xef\xe0\x99\xb2\r\xe9\x00\xc8\xa1\x8a\xae\xb0s\xf6\x95`\xf0\xb0\xdd'
Receive: 59 1191.299515 1191.298549 49: seq: 14, identify_response offset=2360 data=b'A\xeaS\xc0b\xf4\xb0\ti\xfc~\xfb\x9dy\xe9mU\x89]B\xb7\xe3\x9ba[\xe6\xdew)T\x190R\xd3\x94s\xb1{\xd2\x07'
Receive: 60 1191.301515 1191.300618 49: seq: 15, identify_response offset=2400 data=b'JB\xea\xa5%\xa1\xe5\xa7Rw5\xa6_\x92_=\xfb78\x1b\xfdN\x01\xb5zW~\x865\x10\x1d\xb8\xfd\xed\xcd\xeb\x9e\x00\x17`'
Receive: 61 1191.303510 1191.302545 49: seq: 16, identify_response offset=2440 data=b'g\x07\xf8\xd0UC\xaf\x16r8-R\xcd\xa6\xf4\xfa\x99\x0c^U\x99\x03\xde=\xc2\x02\xc9Cna\xcc\xdd\x94\xfb2\xc2\xa4\x96\\A'
Receive: 62 1191.305514 1191.304615 49: seq: 17, identify_response offset=2480 data=b"\x8d\xfa;\x17\xe2'\x00R\x88\xad\x0f\x98\r\xee\xb0\xbf\xa7\xff\xc2\xfd;\xfai\xc5a\xaa\xf9\xc1%\xe3\xa6\x9d\xc6.\r \x98\xf1\x8e\x14"
Receive: 63 1191.307510 1191.306554 49: seq: 18, identify_response offset=2520 data=b'\xc8H\x9a\xbb\xec\x97\xe0\x84\xb4\x94CU&\xb9\x01|"\xafD\xd3\xb0#cs\xd6@/?\x13\xcc\xa6!\xd6\x1c501\xd8@\x16'
Receive: 64 1191.309512 1191.308764 49: seq: 19, identify_response offset=2560 data=b'\x12\x05\xeb\xc5\x82\xa2\x96\x19,)\xaa\xf1`\xb9 ;\xc3`\xb9\\\xc1w\xf4\xfaJUt\r0 \xf9\x17$\xd3\xca\xf1K\x03\x8d('
Receive: 65 1191.311512 1191.310563 49: seq: 1a, identify_response offset=2600 data=b'Y\xa6r\xd40\x9a"\x9c\x9el\xfd\xf4\x05\xbfiS\xd8\xe4\x9b\x8b<\x7f9.=%I\xed\xd4\xae\xc2\xbf\xb9\xf2~\'\xc2jn\x8a'
Receive: 66 1191.313516 1191.312613 49: seq: 1b, identify_response offset=2640 data=b'\xfe\xe7zH\x83\x96!/y\xaa\xc10\x8d\xbc\x1f\xb5\x06"\x89\xd7!\x12D1\x17\xa2_`\xa8\x91\xd0\xd7\x19k\xf7\x0b\x13\xc4R\xd3'
Receive: 67 1191.315511 1191.314557 49: seq: 1c, identify_response offset=2680 data=b'n\xa4+RW\x12\xe7\xaccQy\x07\x18\xe6\x9f|C\rej<}\xe9\xd8F\xc2|\xc4\xfd\xeeS\x8cI\xb6\x15\xac\xe1\xb1\xb9\xce'
Receive: 68 1191.317515 1191.316611 49: seq: 1d, identify_response offset=2720 data=b'\xee&\xec;\xa9\x83\x95\x0fU\x01\x98{\xbc\x87\xdf\xa8\x05\xf1y\xdf\x9c\x8c\xad\x07\xf4u\x0f\x8f\xad\x9d\x17}\x03\xd2\xe3\x1d\xb5\t\xce\x91'
Receive: 69 1191.319511 1191.318556 49: seq: 1e, identify_response offset=2760 data=b'\x17\xb3\xcd^#b\x9c\x10\xb1R\xd6\xb0\x9e\xed\x8d\xfd\x19?\xc3\xea\xf1d/\xed\xff\xf2\xb3\xee\x84\x9f!\x0e\xbb\x86\xa9Q\xb8=\\\x97'
Receive: 70 1191.321511 1191.320617 49: seq: 1f, identify_response offset=2800 data=b"\xa6\xf4\x13W\x8a|p\x03\xd0\x82\xdf\xb3\xdf\x04o\xf4\x8e\x8e\xb4\xeb\xbf\xa0\xcd\x91\xd0\x98\x9b\x02\xb1)F\xb9\xe13\rW'zN_"
Receive: 71 1191.323511 1191.322550 49: seq: 10, identify_response offset=2840 data=b'\x12\x1cZ\xf3\xb8_\xf4\xb6\xac)\xd0iW\xb0\x82\xee\xe3\x88\xed\xdf\x9e\xb6\xf0\xd2\xcf\xc8\xff\x14\x96\xcc|\t\xafE\xe0\x0b _p\xaa'
Receive: 72 1191.325513 1191.324608 49: seq: 11, identify_response offset=2880 data=b'\xb1st\x01\xbf\t:\xb8|8\xec\xa4\xfc\x91\xebc\x98\xa5\xf6\x02\xa5\xd9\xeb9\xe7\xf8\xba\x7f\xb0\xba+\xcc\x1f\xfd\x1b\xe3\xc5\xaao\x8e'
Receive: 73 1191.327513 1191.326544 49: seq: 12, identify_response offset=2920 data=b"\x8c:'\xdctW\xe0+\xd1\x08\xbf\x87\xaev\x12\xd2:\x0e\xb6\xec\x7f\x18\x87l?\xe5\xf8\x06\xe8'\xfcp\x96~\x8f\xa4\x87\x884q"
Receive: 74 1191.329514 1191.328618 49: seq: 13, identify_response offset=2960 data=b'\r\x9b\x93\xbf\xd3x\xf0\x87]\x0b\xfeQE\xf0\x8f\x96\x9d\x8f\x8d\x18\x88\xcc\x7f\xff\x005\xec\xe3\xec<\x08\xceg\xd3 \x0c\xa7{\xb9\x94'
Receive: 75 1191.331511 1191.330551 21: seq: 14, identify_response offset=3000 data=b"\xbb\xf9:\xcd&\xaf\xff\x05'\xf9\xf4\x16"
Receive: 76 1191.333510 1191.332608 9: seq: 15, identify_response offset=3012 data=b''
Receive: 77 1191.352573 1191.351668 11: seq: 16, uptime high=4 clock=73642957
Receive: 78 1191.411540 1191.411066 10: seq: 17, clock clock=83622841
Receive: 79 1191.464512 1191.463266 10: seq: 18, clock clock=92392105
Receive: 80 1191.516572 1191.516192 10: seq: 19, clock clock=101287010
Receive: 81 1191.570506 1191.569386 10: seq: 1a, clock clock=110219061
Receive: 82 1191.622508 1191.621985 10: seq: 1b, clock clock=119056720
Receive: 83 1191.674511 1191.673916 10: seq: 1c, clock clock=127780412
Receive: 84 1191.726522 1191.725964 10: seq: 1d, clock clock=136523491
Receive: 85 1191.779505 1191.778250 10: seq: 1e, clock clock=145307926
Receive: 86 1191.791574 1191.790621 10: seq: 1f, clock clock=147386138
Receive: 87 1192.422571 1192.421677 8: seq: 10, debug_result val=964
Receive: 88 1192.424552 1192.423799 8: seq: 11, debug_result val=1212
Receive: 89 1192.426539 1192.426089 10: seq: 12, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 90 1192.434512 1192.433235 12: seq: 13, shutdown clock=255343077 static_string_id=oids already allocated
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Transition to shutdown state: MCU 'mcu' shutdown: oids already allocated
Dumping 12 requests for client 281473143754816
Received 1190.986939: b'{"id": 281473640711888, "method": "info", "params": {"client_info": {"program": "Moonraker", "version": "v0.8.0-40-gb21f177"}}}'
Received 1191.015586: b'{"id": 281473640728896, "method": "list_endpoints", "params": {}}'
Received 1191.069304: b'{"id": 281473640711792, "method": "info", "params": {}}'
Received 1191.093606: b'{"id": 281473640710256, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 1191.122345: b'{"id": 281473640711648, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "print_stats": ["print_duration", "total_duration", "filament_used", "filename", "state", "message", "info"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "webhooks": ["state", "state_message"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "extruder": ["target", "temperature", "pressure_advance", "smooth_time", "power"], "heater_bed": ["target", "temperature", "power"], "temperature_sensor mcu_temp": ["target", "temperature", "power"], "temperature_fan raspberry_pi": ["target", "temperature", "power"], "heater_fan heatbreak_cooling_fan": ["speed"]}, "response_template": {"method": "process_status_update"}}}'
Received 1191.143763: b'{"id": 281473640710640, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "temperature_sensor mcu_temp": null, "temperature_fan raspberry_pi": null, "heater_fan heatbreak_cooling_fan": null}}}'
Received 1191.270810: b'{"id": 281473641327248, "method": "info", "params": {}}'
Received 1191.521504: b'{"id": 281473640711264, "method": "info", "params": {}}'
Received 1191.526205: b'{"id": 281473640713040, "method": "info", "params": {}}'
Received 1191.788132: b'{"id": 281473640713280, "method": "info", "params": {}}'
Received 1192.047347: b'{"id": 281473640710832, "method": "info", "params": {}}'
Received 1192.301573: b'{"id": 281473640711648, "method": "info", "params": {}}'
Reactor garbage collection: (1192.001601067, 0.0, 0.0)
MCU 'host' shutdown: Command request
clocksync state: mcu_freq=50000000 last_clock=59120735400 clock_est=(1192.072 59103208371 49994962.316) min_half_rtt=0.000085 min_rtt_time=1192.419 time_avg=1192.072(0.018) clock_avg=59103208371.390(900390.724) pred_variance=1842762277.992 clock_adj=(-1078.757 49995253.000)
Dumping serial stats: bytes_write=774 bytes_read=7291 bytes_retransmit=0 bytes_invalid=0 send_seq=106 receive_seq=106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 90 messages
Sent 0 1191.792225 1191.792225 8: seq: 10, identify offset=0 count=40
Sent 1 1191.805334 1191.805334 8: seq: 11, identify offset=40 count=40
Sent 2 1191.806641 1191.806641 8: seq: 12, identify offset=80 count=40
Sent 3 1191.808016 1191.808016 9: seq: 13, identify offset=120 count=40
Sent 4 1191.809378 1191.809378 9: seq: 14, identify offset=160 count=40
Sent 5 1191.810554 1191.810554 9: seq: 15, identify offset=200 count=40
Sent 6 1191.811707 1191.811707 9: seq: 16, identify offset=240 count=40
Sent 7 1191.812891 1191.812891 9: seq: 17, identify offset=280 count=40
Sent 8 1191.814159 1191.814159 9: seq: 18, identify offset=320 count=40
Sent 9 1191.815618 1191.815618 9: seq: 19, identify offset=360 count=40
Sent 10 1191.817035 1191.817035 9: seq: 1a, identify offset=400 count=40
Sent 11 1191.818380 1191.818380 9: seq: 1b, identify offset=440 count=40
Sent 12 1191.819685 1191.819685 9: seq: 1c, identify offset=480 count=40
Sent 13 1191.820944 1191.820944 9: seq: 1d, identify offset=520 count=40
Sent 14 1191.822173 1191.822173 9: seq: 1e, identify offset=560 count=40
Sent 15 1191.823565 1191.823565 9: seq: 1f, identify offset=600 count=40
Sent 16 1191.824810 1191.824810 9: seq: 10, identify offset=640 count=40
Sent 17 1191.825995 1191.825995 9: seq: 11, identify offset=680 count=40
Sent 18 1191.827421 1191.827421 9: seq: 12, identify offset=720 count=40
Sent 19 1191.828938 1191.828938 9: seq: 13, identify offset=760 count=40
Sent 20 1191.830172 1191.830172 9: seq: 14, identify offset=800 count=40
Sent 21 1191.831661 1191.831661 9: seq: 15, identify offset=840 count=40
Sent 22 1191.833549 1191.833549 9: seq: 16, identify offset=880 count=40
Sent 23 1191.835004 1191.835004 9: seq: 17, identify offset=920 count=40
Sent 24 1191.836438 1191.836438 9: seq: 18, identify offset=960 count=40
Sent 25 1191.837969 1191.837969 9: seq: 19, identify offset=1000 count=40
Sent 26 1191.839623 1191.839623 9: seq: 1a, identify offset=1040 count=40
Sent 27 1191.841545 1191.841545 9: seq: 1b, identify offset=1080 count=40
Sent 28 1191.843380 1191.843380 9: seq: 1c, identify offset=1120 count=40
Sent 29 1191.845161 1191.845161 9: seq: 1d, identify offset=1160 count=40
Sent 30 1191.846575 1191.846575 9: seq: 1e, identify offset=1200 count=40
Sent 31 1191.848049 1191.848049 9: seq: 1f, identify offset=1240 count=40
Sent 32 1191.849532 1191.849532 9: seq: 10, identify offset=1280 count=40
Sent 33 1191.850879 1191.850879 9: seq: 11, identify offset=1320 count=40
Sent 34 1191.852197 1191.852197 9: seq: 12, identify offset=1360 count=40
Sent 35 1191.854985 1191.854985 9: seq: 13, identify offset=1400 count=40
Sent 36 1191.856683 1191.856683 9: seq: 14, identify offset=1440 count=40
Sent 37 1191.858854 1191.858854 9: seq: 15, identify offset=1480 count=40
Sent 38 1191.860865 1191.860865 9: seq: 16, identify offset=1520 count=40
Sent 39 1191.862249 1191.862249 9: seq: 17, identify offset=1560 count=40
Sent 40 1191.863453 1191.863453 9: seq: 18, identify offset=1600 count=40
Sent 41 1191.864726 1191.864726 9: seq: 19, identify offset=1640 count=40
Sent 42 1191.866057 1191.866057 9: seq: 1a, identify offset=1680 count=40
Sent 43 1191.867264 1191.867264 9: seq: 1b, identify offset=1720 count=40
Sent 44 1191.868529 1191.868529 9: seq: 1c, identify offset=1760 count=40
Sent 45 1191.869723 1191.869723 9: seq: 1d, identify offset=1800 count=40
Sent 46 1191.870908 1191.870908 9: seq: 1e, identify offset=1840 count=40
Sent 47 1191.872167 1191.872167 9: seq: 1f, identify offset=1880 count=40
Sent 48 1191.873378 1191.873378 9: seq: 10, identify offset=1920 count=40
Sent 49 1191.874566 1191.874566 9: seq: 11, identify offset=1960 count=40
Sent 50 1191.875814 1191.875814 9: seq: 12, identify offset=2000 count=40
Sent 51 1191.877121 1191.877121 9: seq: 13, identify offset=2040 count=40
Sent 52 1191.878320 1191.878320 9: seq: 14, identify offset=2080 count=40
Sent 53 1191.879507 1191.879507 9: seq: 15, identify offset=2120 count=40
Sent 54 1191.880765 1191.880765 9: seq: 16, identify offset=2160 count=40
Sent 55 1191.881972 1191.881972 9: seq: 17, identify offset=2200 count=40
Sent 56 1191.883169 1191.883169 9: seq: 18, identify offset=2240 count=40
Sent 57 1191.884432 1191.884432 9: seq: 19, identify offset=2280 count=40
Sent 58 1191.885627 1191.885627 9: seq: 1a, identify offset=2320 count=40
Sent 59 1191.886812 1191.886812 9: seq: 1b, identify offset=2360 count=40
Sent 60 1191.888068 1191.888068 9: seq: 1c, identify offset=2400 count=40
Sent 61 1191.889293 1191.889293 9: seq: 1d, identify offset=2440 count=40
Sent 62 1191.890491 1191.890491 9: seq: 1e, identify offset=2480 count=40
Sent 63 1191.891670 1191.891670 9: seq: 1f, identify offset=2520 count=40
Sent 64 1191.892936 1191.892936 9: seq: 10, identify offset=2560 count=40
Sent 65 1191.894147 1191.894147 9: seq: 11, identify offset=2600 count=40
Sent 66 1191.895349 1191.895349 9: seq: 12, identify offset=2640 count=40
Sent 67 1191.896605 1191.896605 9: seq: 13, identify offset=2680 count=40
Sent 68 1191.897808 1191.897808 9: seq: 14, identify offset=2720 count=40
Sent 69 1191.899007 1191.899007 9: seq: 15, identify offset=2760 count=40
Sent 70 1191.900273 1191.900273 9: seq: 16, identify offset=2800 count=40
Sent 71 1191.901488 1191.901488 9: seq: 17, identify offset=2840 count=40
Sent 72 1191.902690 1191.902690 9: seq: 18, identify offset=2880 count=40
Sent 73 1191.903946 1191.903946 9: seq: 19, identify offset=2920 count=40
Sent 74 1191.905164 1191.905164 9: seq: 1a, identify offset=2960 count=40
Sent 75 1191.906362 1191.906362 9: seq: 1b, identify offset=3000 count=40
Sent 76 1191.907663 1191.907663 9: seq: 1c, identify offset=3040 count=40
Sent 77 1191.908994 1191.908994 9: seq: 1d, identify offset=3080 count=40
Sent 78 1191.910188 1191.910188 9: seq: 1e, identify offset=3096 count=40
Sent 79 1192.001384 1192.001384 6: seq: 1f, get_uptime
Sent 80 1192.055026 1192.055026 6: seq: 10, get_clock
Sent 81 1192.107943 1192.107943 6: seq: 11, get_clock
Sent 82 1192.160173 1192.160173 6: seq: 12, get_clock
Sent 83 1192.211784 1192.211784 6: seq: 13, get_clock
Sent 84 1192.263284 1192.263284 6: seq: 14, get_clock
Sent 85 1192.315131 1192.315131 6: seq: 15, get_clock
Sent 86 1192.367362 1192.367362 6: seq: 16, get_clock
Sent 87 1192.418960 1192.418960 6: seq: 17, get_clock
Sent 88 1192.422317 1192.422317 6: seq: 18, get_clock
Sent 89 1192.461737 1192.461737 6: seq: 19, emergency_stop
Dumping receive queue 100 messages
Receive: 0 1191.784274 0.000000 12: seq: 10, stats count=51 sum=11508 sumsq=20530
Receive: 1 1191.784276 0.000000 12: seq: 10, stats count=51 sum=10929 sumsq=25399
Receive: 2 1191.784276 0.000000 12: seq: 10, stats count=50 sum=10093 sumsq=22348
Receive: 3 1191.784277 0.000000 12: seq: 10, stats count=50 sum=11054 sumsq=30867
Receive: 4 1191.784278 0.000000 12: seq: 10, stats count=51 sum=11619 sumsq=51700
Receive: 5 1191.784279 0.000000 12: seq: 10, stats count=50 sum=10240 sumsq=21426
Receive: 6 1191.784281 0.000000 13: seq: 10, stats count=51 sum=12454 sumsq=32396
Receive: 7 1191.784282 0.000000 12: seq: 10, stats count=51 sum=12066 sumsq=27073
Receive: 8 1191.784283 0.000000 12: seq: 10, stats count=51 sum=11246 sumsq=19923
Receive: 9 1191.784288 0.000000 12: seq: 10, stats count=51 sum=11700 sumsq=25141
Receive: 10 1191.792536 1191.792225 48: seq: 11, identify_response offset=0 data=b'x\xda\xa5\x1ako\xdc\xb8\xf1\xaf\xb0\x0b\x04\xb9\x14\xb6o\xf5\xdc]\x03\xf9\xe08\xb9C\xd0\xba\xc9\x9d\x13\xb4@q\x10d\x89\xbbKX'
Receive: 11 1191.805522 1191.805334 48: seq: 12, identify_response offset=40 data=b'\xaf\x13%?z\xf0\x7f\xef\x0c\x87/i\xd7N\xda\xf3\x97\xa583\xe4p8o\xfa\x8f\xc5\xcd(\xaa2\xbb\xe3\xbd\x14m#\x17\xe7\x8b'
Receive: 12 1191.806829 1191.806641 48: seq: 13, identify_response offset=80 data=b']Q\x9c\xb3\x1f\xde\xf3\x1b\x917,X\x9e\x85g\xc1i\xfaF\x8fX\xb8\x0c\x83e\x10,\xd9\x8dh\xc6AT\x12p\x7f\xfe\xc7W\xf6'
Receive: 13 1191.808239 1191.808016 49: seq: 14, identify_response offset=120 data=b'N\x7f\xb2m\xdb3"~\xc3\xc2\xb3(9\x0b\x17\'\x8b\xa2\xad\xeb\xbc)a\xf9?\x16yU\xb5E>\xf0\xac\x15\xa5dE;6\xc3'
Receive: 14 1191.809546 1191.809378 49: seq: 15, identify_response offset=160 data=b'\xdbW\xc5\xe2|}\x02\xbc\x0c\x030\x91\xe5\xc5-\x03(L{\xf04\xf6\x10\xca\xd2 t\xadT?\xa2y\xfbjd\xddXU\xd9\xd8'
Receive: 15 1191.810719 1191.810554 49: seq: 16, identify_response offset=200 data=b'\x11A\xea\x08~\x1fy\xffh\xd7\x04\x06n\x11\xbb\xe7r\xc8\x06Q\xdcJ\xfa\x1a\xfa\xbc\x91\xb5\x182\xb3+\x13\rHF\xef\x9f\xc09'
Receive: 16 1191.811910 1191.811707 49: seq: 17, identify_response offset=240 data=b"*\x9e\xf7\x99\xdc\x8fC\xd9\xde7\x8b\xf3\x10\x8f\xd6l\xc5\x0e8z\xa8\xa281[\xc8Nd4\\\x9c'\x81\xc3j\xf2\xaa\xdde\xa2"
Receive: 17 1191.813077 1191.812891 49: seq: 18, identify_response offset=280 data=b'\xb1\xdc+\xb6\x17\xe7\x91[I\xb3l0\xe83\xf3\xe4\xb0\xb2\xa8j\x92\xf7\xd3\xc5&2X\xc5\x16\xb9\x14;1\xe4U\xd6\x8e\xc3\x8c\xe0'
Receive: 18 1191.814355 1191.814159 49: seq: 19, identify_response offset=320 data=b'.\xafF\x8e\xdf%\xdf\xe6c5dv\xa2\xce\x1f\xb2r\xec\xf3\x01tC\xf1\x19\xb8\xcdK\x19\xaco\xc2\xa5=1\xefE^\xbd}\xf5'
Receive: 19 1191.815835 1191.815618 49: seq: 1a, identify_response offset=360 data=b'W\xa9\xa8x\xdf\xb7\xbd\xc7\xf5zi\t9(\xc2\xd0v\x13&\x8a\t\xd7aj\x91\xf7e\x1c\xaf\xd6v\x97^f\x9ain\x06el'
Receive: 20 1191.817238 1191.817035 49: seq: 1b, identify_response offset=400 data=b'G\x89\x1d\xa5v\xb4\xb2#^\xe5\x8f\xf6\xb6A\x8e\x91\xddD\x84\x85\xd9\x00\x86p\x03\xa4\x0f\xa0\xa4\xf8\x0b\xca\x06\x8aBD\xb1\x93g\xdd'
Receive: 21 1191.818583 1191.818380 49: seq: 1c, identify_response offset=440 data=b'\x8d\x9b0Y\xfa\x84\xf6\xc6\x9d\x94\x1a\xdev\xe2\x81W3\x91\x97\xf9\x90gR\xfc\x076\xd8\x8f`KC\x86B\xf3TQr\x98\x12\x8d'
Receive: 22 1191.819875 1191.819685 49: seq: 1d, identify_response offset=480 data=b'\xc7\xef\xca\xa9HW\xe4\x9bt\x9d8\x15Q&\x80|*\xf5\xde\xe7M\xc3+5|\x04\x8du\xcb\xea{\xdd\x8f\xf3\x9b\x86\x99\x83\xab^'
Receive: 23 1191.821136 1191.820944 49: seq: 1e, identify_response offset=520 data=b'\xad\xdd~\xf7\xf5\x11\xb5\xf93\x8b\xc7NB\xea\xac\xb0]bg\xc0x\xe6[\xa1O\x18\xc4\x1d\xcf\xf6b\xb7W2\x8e\xd6>>X\xd6'
Receive: 24 1191.822344 1191.822173 49: seq: 1f, identify_response offset=560 data=b'\xae\xe2\x87\xd6\xc7,,\x1b\x1e;N\xb7\x13O(\x8d5\x1f#\xd6\xa0\xac\x96;\xd4l\xd85\x9a\xd0\xde\x8ba\x0f\x82\xc9\nc\xae\x80'
Receive: 25 1191.823777 1191.823565 49: seq: 10, identify_response offset=600 data=b'\xe1N&\x87\xd5\xc6\x19HaUW\x16\xd5\xad\x1d\x8b\xd2\x0e\x1f\x9b"\x9bj)+\xea2;P\xdc\xa5\xb7\x03\xef:\xe7\x00\xf03\xd3'
Receive: 26 1191.824996 1191.824810 49: seq: 11, identify_response offset=640 data=b'\xf6T\x8a\xde\x0c\xc9\x89)d\x875V\x92{\x8b\x86\xee`\xc3\x9e\xf7u\x0b\xa6\xdb\x1d\x95\xa8\x0fvB\x8d\x1dSC]\x8cyo\xb5'
Receive: 27 1191.826173 1191.825995 49: seq: 12, identify_response offset=680 data=b'\xa5\x7f\xc8\x0e\x1c\x13\x1b\xec$\xea\xfe jNG\xdb\xb8Uz\x94\x87\x13+\xac_\xf2\x9b\x11,\xaa\xed\x16\xe7\x1b\xf3\x05\xab\xec\x945'
Receive: 28 1191.827641 1191.827421 49: seq: 13, identify_response offset=720 data=b'\xd1\xfd\x04\x16\xad\xe79\xc4\x88\xbe\xe4\xbd\xb3\rt`\xa1A\xb8\xef\xc5\xc0\x0f0P\x8d\t\x11\xbc6\xafy\xbf\xe3M\xf1\x98\xa1\xc3\x02'
Receive: 29 1191.829104 1191.828938 49: seq: 14, identify_response offset=760 data=b'&`\x8a\x9cW\xb6ok~\x10Od^w\xbeI\xe8o\x1bM\xa6\xf1\x06Xw\x9e\x96\x8eke\xdc\x8b\xdd\x8e\xf7x\x08\x89\x16\x83'
Receive: 30 1191.830434 1191.830172 49: seq: 15, identify_response offset=800 data=b'>1q\x9b\xabh\x06<\xe5\x03\xb7\x02\nA\xab\xb7\x02\xe2\x0b8\x95\x8cd\xc8\x8a\xbe \xb1\x9e,v\xe0O\x14\x9f\xa0\xff\xfaK\xe1'
Receive: 31 1191.832026 1191.831661 49: seq: 16, identify_response offset=840 data=b'\x80\xe1\xd1\xe7\xd8\xe1-\xc0E\x9e,\xb4\xcf\xcd$\xec\x97\x81\x06\xdaX\x84c\x92s\x1a\xce\xd0\xf0\n\x0c\x9a\xbb\x8e\x14\x84\x88\x8e\xb1n'
Receive: 32 1191.833769 1191.833549 49: seq: 17, identify_response offset=880 data=b'K\xb1}\xcc\xe0\xae\xedZ=W&\xc5tH\x05\x0e\x10Jd\xb1&\xa3;\x9c\xe2\xe3\\Vq\xedFBB\xd4w9\xdf>\x86\x0b'
Receive: 33 1191.835224 1191.835004 49: seq: 18, identify_response offset=920 data=b'\x13%o\x06\xd8\x9c\xb5\xdb-\xec\xa2\x8c\xcaF%\xd8\xc78hu\x0c+\xcd\xd5\xd2\x83\x8c]\xe9$M\t\xc7~\xf4\xb6Y\xc12t'
Receive: 34 1191.836669 1191.836438 49: seq: 19, identify_response offset=960 data=b'%\xb3,\xe0x\xa2\x017\xb0\x9c\x11\xa8\xbb\x1c\x9d\x13\x897\x16a\x9e1\xfc\x9f\xcaV;e\xd3\xfe\xd8}A\xd6\xb3\x03\xc2=/n'
Receive: 35 1191.838210 1191.837969 49: seq: 1a, identify_response offset=1000 data=b'\xbd\x88\x1d\xd9S\xcd\xd2\x0c\xcbA\xd7\x82=\xcf\xf7\xf7\x02Vd\x16\x98\xa5\n\xcf\xe4_\x1e\x8b\xc2\xe7P\xc0RV\x1e\xb3\xa8\xfb\xac\x84'
Receive: 36 1191.840028 1191.839623 49: seq: 1b, identify_response offset=1040 data=b'\xd3\x19\xc1\\\xc2Ib\x10\x0e\xa2\xc73\xec\xa1y@\xb0\x10[\x12ObOw\xcc_~\xfb\x88\x93K\xa0\x0f\xf0\xd3`\xbe\xa5\x7f\x07'
Receive: 37 1191.841796 1191.841545 49: seq: 1c, identify_response offset=1080 data=b't\xee\x91\x1f\xcb\xde\xec\x1e\xad\x9f&\x04\x89!\xd1Y\xc2Q\x12{\xf9 \xdb\x95%\x98\x86\xf9c\xc8qj\x901\x8a\xd8\xdc\x07\xd5\x83'
Receive: 38 1191.843774 1191.843380 49: seq: 1d, identify_response offset=1120 data=b'\x1c\xa71\xae\xbd\xca\x9b\xe0\x17n/\x04+\xa5\x8cF\x85\x1e\xb5\xee|\x13\xc0\x02\xa3@\x1c\xff\xa4\xb3\x04\x15N\x17\x1d )\xb6U.'
Receive: 39 1191.845393 1191.845161 49: seq: 1e, identify_response offset=1160 data=b'b\xd7\x9c$&@\x94\x12Q\xc3\x1f4\x0b\x10\x1c\xad\xb7\x10=\xf9\xcf\x80\x90|\xa9\xfd\xef\x89\x15\x88Sof\x84\xf9\x8dd\tD\n'
Receive: 40 1191.846795 1191.846575 49: seq: 1f, identify_response offset=1200 data=b'\x17\xe6e)X\x82l\x9d\xb19/\x93\x84\x84\xe7\xf9)\x0f\x1a\xc5\x06:`\xfe\xea\xc7m\x9d\xce\x82\x0f\xe6^Z\x0b$\xa9#\x91\xed'
Receive: 41 1191.848265 1191.848049 49: seq: 10, identify_response offset=1240 data=b'v\xb8\xcf{\xee\xd3\xd6B\xb6&J\xd7\xad\x14\xc7\xd2\x97\x83E\xe35-\xfa\xfc9"<\xaf\xca\x8c^\n0\xc9f\x8au<\xbe$'
Receive: 42 1191.849776 1191.849532 49: seq: 11, identify_response offset=1280 data=b'\xb8\x1b\xe5@\x19\x061\xf0\xcd\x02sLk\xe6\xc1\xc6!\xa8\xd0\x89\xb6B\xc1\x95\xd9X\xebE^\xa0\x80%u\x063\x11\xb5\n16'
Receive: 43 1191.851066 1191.850879 49: seq: 12, identify_response offset=1320 data=b"\x02Q%\x86\xa8D\x8d2D\x07q\xc4|@\xb5<\xbc\xc1\xcf\x8cx\xd7\xf6:,\x93\xafP\xdfVI\xf8C'\xe0J\xfc$`c"
Receive: 44 1191.852376 1191.852197 49: seq: 13, identify_response offset=1360 data=b'W\x9a\x9d\xc2G\x02\x83\xa6\x90u\xcckx\xb6\x14?\x99l\x0b\xeb\xf2\x8b\xf7\x97\xd9\xd5\xc5\xbf0\x95\xdb\xc0\x15]\xfe\xfd\xd3\xe5\xdf\xb2'
Receive: 45 1191.855328 1191.854985 49: seq: 14, identify_response offset=1400 data=b'\x9f~\xfd\xf0\x0b\xc6+\xfa;Y\\]~]\x9c/*(\xf6\x1f\xa0\xac\xff|y\xa1l\xc5\x90\x81B}\xfe\xe7\x15}F\xe1\n\xe5'
Receive: 46 1191.857030 1191.856683 49: seq: 15, identify_response offset=1440 data=b"s\xfd\xe5\xe2\xcbuv\xfd\xf5\xea\xfa\x97\xec\xdd\xc5\xf5\x07Ld\xd2'LeFH\xaeTA\xa0\xba\x02\xba\xee\xd2\xc3\xb3\xe5\xe2\xfc\xdf"
Receive: 47 1191.859156 1191.858854 49: seq: 16, identify_response offset=1480 data=b'\xcb\x93\xd5o\x80\t\x9a\xa6\xda\x06*\x10\xe2\xbc\xdah\xfd\x1b\xa4-\x9dh\t1\\\x9b\xefb/\xba\xe5\x8f\xcfA\x02\x0b\x81\xf9\x19,'
Receive: 48 1191.861115 1191.860865 49: seq: 17, identify_response offset=1520 data=b'\xb4\xb0\x04lx\n\x8b,l\x9d\xc63XlaA\x006:\x05&\x0e\x18\xc7snR\x07\\\x85svV\x8e\xd5e0\xe7g\xed'
Receive: 49 1191.862442 1191.862249 49: seq: 18, identify_response offset=1560 data=b'\x80\xd1\xd20\x04\x1e\x87N\x0f\x03\x04\xa5I\x02&\x1e\xa4\x0e\x14x `\xd5\x07\x85\x1e\x08\xee\xcd\x07E\x1eh\x1dO@\xb1\x03\xa5\xa0'
Receive: 50 1191.863642 1191.863453 49: seq: 19, identify_response offset=1600 data=b'\x1e>(\xf1@\xc1\x94\x8d\xd4\x03ES6V\x1e(Vl<M\xbc#\x94\x1bJ\x19\x82(\x8a\x16\xe7\xa0\x90\xb9L\x96\xf1\xaaT\xa9'
Receive: 51 1191.864925 1191.864726 49: seq: 1a, identify_response offset=1640 data=b'\xdcP\xf1d\x19\x847\xa0c\x9aJk\x14\x0cK~\xb7\xd4Z\xa5\xf6\xa3\xa9@M\x81F\xfa\x93\xa1\x9aL\x82\xd0\x9f\x8c\xd4\xe4\xca\x88'
Receive: 52 1191.866246 1191.866057 49: seq: 1b, identify_response offset=1680 data=b'\x86&c5\x19,\xc3\xd8\x9fMh6\\O\xb6Ji\xd6^\t\xcd\xaeh\x16\xfc\x9c9+\xa4)\x02\xfdD\x0f\x85M&Jm\x99'
Receive: 53 1191.867440 1191.867264 49: seq: 1c, identify_response offset=1720 data=b'LY\xf0\x96R5j\x90\\T\x15\xd3\x06h"\x93d\xf5(\x07\xb6\xcf\xef8\x96i\x98\x92q?\xf2PbyQ\xa1\x07{d\xa6'
Receive: 54 1191.868713 1191.868529 49: seq: 1d, identify_response offset=1760 data=b'Z()\xac^\xe6\rk\xda\x81\x81+c\x18\x0e\x18\xdc\x04\x113E\xcc\xee\xf7\x02\xc6\xe4Y$\xeb\xc07\x02\x8b\x14\xb7\x81\xf6\xf5\x80'
Receive: 55 1191.869901 1191.869723 49: seq: 1e, identify_response offset=1800 data=b'q\x12\xea\xd9\x1d\xac\n\xbb\xe7\x03\x13\x92\xe5z/\xaa\xde\xa9\x8a\xd1\xc8\x12Q\xd1+Q\xadE\xb3*MP\xa9\x16l\xc7\x1bf\n\\'
Receive: 56 1191.871083 1191.870908 49: seq: 1f, identify_response offset=1840 data=b'K\x0fA\xf0\x92\x9a\x89\xac\xcb{\t \xd5iRe\x8c\x01\xf4\x1cR\x149\xa8\x96\xe2e;V%\x9dK\xb9\xde\xf7\xd7\xc1\xfa\x1d\xa4'
Receive: 57 1191.872353 1191.872167 49: seq: 10, identify_response offset=1880 data=b'\xa2\xc8\x16\x10\x0f{\x1cPs\xe5\xbbP\xd9\x0f\xe01K\xc8x\xc4\xf0\x86R\xdc\xef$\xab\xc7\x81?X:\x88\xd6\x06oz\xb3X\x01'
Receive: 58 1191.873555 1191.873378 49: seq: 11, identify_response offset=1920 data=b'\x1b\x08\x84\x1f\xd9\xf6\x90\xa1\x94Z4\x1dm\xcd\xa8RC\xf7\xfa\x01\x0f\xcf \xf4\rX\x07\xd7-\xb0\xd16B\x07\x1f\x8d\x87\xe5\t\xe1'
Receive: 59 1191.874741 1191.874566 49: seq: 12, identify_response offset=1960 data=b"A`$7\xca\xe8\xd4\x89]\x01\xbfq\x85\xe9\xd6T\x07\xfd\xd4\xf6\x05\xb7\xbd\x10\xa6{\xb9T|\xfd\xfc\xf9\xe3'\x86\x86\xcb@\x99\x05"
Receive: 60 1191.876047 1191.875814 49: seq: 13, identify_response offset=2000 data=b'\xa0\xa1\x1c\xb6\x90\x02\x96\xd4\xa8\xfcH)\xad\xb7.v\t\x99(O0Q\xd4rkA\x97T\xdfXsA\xcd\xa0\x17H\x95\x96#%'
Receive: 61 1191.877306 1191.877121 49: seq: 14, identify_response offset=2040 data=b'\xdc\xc5\x90\x83@^\xff\xf8\x9a2/Cd\x9a\xa8\xae\xa7K\x89)\xa5\x1f\x06\xcb\x1ee2\x07h\xa8[`;\x90\xd5Rg\xc4\x00\xeb'
Receive: 62 1191.878497 1191.878320 49: seq: 15, identify_response offset=2080 data=b'\x16,K\xab\x17\xc3\xf6\x1dFQ\x07\xb6\xcd>\xdb\xde\xa3\xc6\xc8\x01\\W\x94v\x7f\xcc\xf3\r\x12X\x04#?\x87\xbd\n3kZ~'
Receive: 63 1191.879684 1191.879507 49: seq: 16, identify_response offset=2120 data=b'\xda\xd2\x19HKEr*r\xe7X\x06\xe4\x9d\x0b\x9bj&\xd8\x87\xab\xc9\xbc.\x7f\xd45\xd2\xce\x91w\xa8Iy\xe3\xe1`.r\x95'
Receive: 64 1191.880950 1191.880765 49: seq: 17, identify_response offset=2160 data=b'?\xa0\xee\xae\x8d\xbc\xa9\xfdu\xc5\xa5\xccw\x9c\xf1\xa6\x80\xf4\xd0\x18(\xdc\xce\x95\x90\x92\xc3\x96Pj\x96c\x85\xfa\x06\xc4\x98\x953\x9d'
Receive: 65 1191.882150 1191.881972 49: seq: 18, identify_response offset=2200 data=b'\xa8(c\xe0w\x1c/\n\x13\xf2\xe7\t\xf6y_*\x0f\xa5\xb1\xb1\x81\xfe<\xb6\x91\x8bF\xc6*\xe6\n\xafR\x952\x0cF\xfd\xb6j'
Receive: 66 1191.883350 1191.883169 49: seq: 19, identify_response offset=2240 data=b'\xef\xa9x\xfa\x95\xeb\x05`)4\xa0^Y\x1cx\xd3.G\x9f\x82\xbd\x89k\x8bp\xc07\xbb\x17\xe0\x97\xf9C\xc1\x01\xea\xb7=)\x17'
Receive: 67 1191.884618 1191.884432 49: seq: 1a, identify_response offset=2280 data=b'u\x94\x13\x96^\xa0\xc2\x8e\xb3GeN\xfc\x02\x05\x16\xee\xd7|\xd0w\xa2\xd8F\x0cQ\x8f\xb5\x993\xb6\x00r\xb8\xb6v\x8d\x8d\x18X'
Receive: 68 1191.885803 1191.885627 49: seq: 1b, identify_response offset=2320 data=b'L\xf9]\xe5\xce\xfcg\x8ek\xed\x88\x87\xb6e\xdb\\\xc9\x84\xe4\x81}\xa7/\xbe\x8ah\xbf\xa7Z\xc0\x94\xfb~QRDJpK\x92'
Receive: 69 1191.886990 1191.886812 49: seq: 1c, identify_response offset=2360 data=b'\xab>\xda\x17\xf8\x02\xdd\x7f\xc4\xbe\xb9\xf6\x1d\x92\xaa\x07\x0bA\x8d\xb5\x10l\xa9\x7fm\xf2\x1b\x8cF\xadVd%\r\xc2\xa0\xae\xa8C\x00'
Receive: 70 1191.888243 1191.888068 49: seq: 1d, identify_response offset=2400 data=b'M\x80\x8b\xc5\x15 a\x1a*\xaa\x9e\x1cXy\x9c\xb9\xef\xa2\x17\xa3\x19R^\x16\x16\x8c5\xc9\x1c\xacc\x81\x8d\xc4\x067^\x1d\xe0\xba'
Receive: 71 1191.889468 1191.889293 49: seq: 1e, identify_response offset=2440 data=b'\x93\xd2\xe3\xc3\x1c\xecs\x04\xda\xcb\xe9\xc9k\x86\x85\x8av\x80\x96\x1c\xa09\xd9Q/\xc4\x81U4\x9a\xb0\x12\xf8`\x0c\xbf\xd7\x9f?\xaa'
Receive: 72 1191.890667 1191.890491 49: seq: 1f, identify_response offset=2480 data=b'\xc2\x8e\x9a\x1c\x870\xd9qL\x1a\x92x\x0el\xda\xe6\xf4\x06#\x8f\xb2\xbd\x19\x17\x13&\xb5\x034R\xd3\xfe*\x99\xdc!5\xf5p\xe9'
Receive: 73 1191.891885 1191.891670 49: seq: 10, identify_response offset=2520 data=b'N\xd0+\x9a\x86\x11`r\x06\xb8]\xf5\xae\x98\x15\xfb\xb1\xb9\x05\xe5\x83T\xa5\xa4\xe7*o^:\x00\xc8\x84\xbc\x9e\x0e\xb2\xe8\xd4\xa1\xd8'
Receive: 74 1191.893115 1191.892936 49: seq: 11, identify_response offset=2560 data=b"\x92\xac\x90LU\x1c^\xa7\x9f\x92\x92\xb6\xa9 \x8f\xb9\x83\x05\x88\t\x95\x9eX\x13\xd9\x1c4:\xcf\xd9'\xc8\x87\xa0\xcc\xb9\xc1*m\x8b"
Receive: 75 1191.894324 1191.894147 49: seq: 12, identify_response offset=2600 data=b'\x8dn\xf9\x17jd\xab\x97O\x9b\x1a\xe9\xf7\xd0\x92\xba\xd7\x12\xdb\x95\xe8\xe1\xc9\xf7\x14\x00FPl\xabR\x15\\\x945Uy\x8f)\x03'
Receive: 76 1191.895525 1191.895349 49: seq: 13, identify_response offset=2640 data=b"\xbe\x84\x1c\xa9\xf7\xd0\x84\xc9\x83\xe3+\x85\xce\xa0\xc8\xe3a\x95\x0b\xb9\xe6A'\x1f\x93M(\xde\xa2`\x9d$*\xbb\xd6\x1f\xa9J\xaf\xe9"
Receive: 77 1191.896783 1191.896605 49: seq: 14, identify_response offset=2680 data=b'#M\x94?\x80\x8f4]\xc18zzR\xdd\x1d\xc8M$\xa7\x07^\xdd\xd3\xf4Kv\x891\xb3)\xf8\xacsz\x8a\xd28\xda\x03u'
Receive: 78 1191.897986 1191.897808 49: seq: 15, identify_response offset=2720 data=b"\xdd'\xddd3E15q\xfc\xe5n\xc6\xed\x96\x83\xe7B\xaa\xad\xd8\xb6\xf8[\t\xef\x19\x17\xbb,\xa7\xe8\x15m3u\xd2;\xa7%"
Receive: 79 1191.899179 1191.899007 49: seq: 16, identify_response offset=2760 data=b'\x8fu\xbb6\x91{A\x9eP\xe4^\xa7\x94)\x88>\x0fzC\xca\xbd\\\xf9\xbf\xb6\xaf\x99\xe0\x96t\xdb]\x9dPu\xe7q\xce\xa8\x91'
Receive: 80 1191.900449 1191.900273 49: seq: 17, identify_response offset=2800 data=b'\xea\xba@4\xf2\x19_\xab\xf7$\xd5\x80}\x89kM\xa1\x07\x99\xdb\xfd\x14\xe3\xa8y\x12\x91\xe0\x93\xed\x0b\xc7\x1a\x1fQ\xa83k@/'
Receive: 81 1191.901663 1191.901488 49: seq: 18, identify_response offset=2840 data=b'\tD\x90K\xd7\x8b.\xddk\xc4\x84\xab}[\x83\xf1\x1f.\xe2?v\x80`\xbd\x06\x7ff\x94\xc7\xb52\xe8\xdb\xa8H\xe8\x9a\xf8\x1e\xae'
Receive: 82 1191.902866 1191.902690 49: seq: 19, identify_response offset=2880 data=b'\xed\xe6\x936\x9d!.0\xe5I\x93\xcdk)-PX\xcf4\x85\xbfGE\xb1d9\xdaD\xfeS*:\x1eQQ\xac\xea\xec\xa3\xc3'
Receive: 83 1191.904120 1191.903946 49: seq: 1a, identify_response offset=2920 data=b'\xf4F\xe4X\x14\xea\r\xba@<8\x01H\xc1\x7f\xf7Zc#\xccEr\xf3Dp\\\x00\x91_R\x7f\x97\x08V>\x85\xd7\x14\xf3\t'
Receive: 84 1191.905340 1191.905164 49: seq: 1b, identify_response offset=2960 data=b'\x10o}\xac\x95yp\xc1~s\xdc\xbfi\xcc(\xfd\xde\xe174c\x13\xabr\xb9\x1fT\xc9\xb0\x0e\xa8x\x96\xce\x14\xe4X\xeb\x1f\xf9'
Receive: 85 1191.906565 1191.906362 49: seq: 1c, identify_response offset=3000 data=b';i|\xec\xba\x81\xb3V!=\xeb@\x9c\xd9,g\x8e\xf1;Lc4\xa6\x81\xaa\x9d\xb8\xfe\xe1!\xff\xd89\xa4\xb3F~O\xd0\xd9'
Receive: 86 1191.907924 1191.907663 49: seq: 1d, identify_response offset=3040 data=b'O\x91\xdb\x06\xe5\xd1\x87@\xcf\xaflB\xf4\xfb\xaaV\xa6W\xf1\xd1w:\t\xb8e\xfd_=\x8b\xf3\xc5\xdd\xf2,\x08\xce\x96\xa7A\x18'
Receive: 87 1191.909181 1191.908994 25: seq: 1e, identify_response offset=3080 data=b'\x9e\xeex\xca\xb7\xf1\xba(\x17O\xff\x05-\xb4\xf7\xf7'
Receive: 88 1191.910373 1191.910188 9: seq: 1f, identify_response offset=3096 data=b''
Receive: 89 1192.001596 1192.001384 12: seq: 10, uptime high=13 clock=3265115935
Receive: 90 1192.055217 1192.055026 11: seq: 11, clock clock=3267796991
Receive: 91 1192.108202 1192.107943 11: seq: 12, clock clock=3270443769
Receive: 92 1192.160388 1192.160173 11: seq: 13, clock clock=3273055030
Receive: 93 1192.211968 1192.211784 11: seq: 14, clock clock=3275634551
Receive: 94 1192.263459 1192.263284 11: seq: 15, clock clock=3278209045
Receive: 95 1192.315311 1192.315131 11: seq: 16, clock clock=3280801610
Receive: 96 1192.367543 1192.367362 11: seq: 17, clock clock=3283413206
Receive: 97 1192.419130 1192.418960 11: seq: 18, clock clock=3285992633
Receive: 98 1192.422571 1192.422317 11: seq: 19, clock clock=3286160552
Receive: 99 1192.462065 1192.461737 12: seq: 1a, shutdown clock=3288133779 static_string_id=Command request
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281473143754816: Disconnected
Restarting printer
Start printer at Fri May 19 14:14:01 2023 (1684505641.5 1311.3)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[mcu host]
serial = /tmp/klipper_host_mcu

[temperature_fan raspberry_pi]
pin = PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473143749168: New connection
webhooks client 281473143749168: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-122-ge6ef48cd / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281473143749168: Disconnected
Restarting printer
Start printer at Fri May 19 14:15:24 2023 (1684505724.1 1393.9)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PB6
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473160785008: New connection
webhooks client 281473160785008: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 1397.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=4936 bytes_read=6082 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=259 retransmit_seq=2 srtt=0.003 rttvar=0.004 rto=0.025 ready_bytes=343 upcoming_bytes=55 freq=168049806 heater_bed: target=0 temp=0.0 pwm=0.000 mcu_temp: temp=0.0  sysload=0.50 cputime=62.675 memavail=714228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473160785008
webhooks: registering remote method 'reboot_machine' for connection id: 281473160785008
webhooks: registering remote method 'pause_job_queue' for connection id: 281473160785008
webhooks: registering remote method 'start_job_queue' for connection id: 281473160785008
Stats 1398.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5378 bytes_read=6318 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=168005533 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.8  sysload=0.50 cputime=62.731 memavail=714004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1399.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5427 bytes_read=6476 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167998215 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.50 cputime=62.780 memavail=714276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1400.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5433 bytes_read=6653 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996770 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.50 cputime=62.812 memavail=714276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1401.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5439 bytes_read=6816 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996568 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.62 cputime=62.844 memavail=714304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 1402.6: gcodein=0  mcu: mcu_awake=0.048 mcu_task_avg=0.000063 mcu_task_stddev=0.000204 bytes_write=5445 bytes_read=6964 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996469 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.62 cputime=62.875 memavail=714352 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1403.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5451 bytes_read=7156 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996466 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.62 cputime=62.907 memavail=714344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1404.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5457 bytes_read=7319 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996539 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.9  sysload=0.62 cputime=62.938 memavail=714132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1405.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5463 bytes_read=7467 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996604 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.62 cputime=62.969 memavail=714388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1406.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5469 bytes_read=7644 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996575 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.57 cputime=63.000 memavail=713892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1407.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000020 bytes_write=5475 bytes_read=7807 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996860 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.57 cputime=63.031 memavail=713892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1408.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5481 bytes_read=7969 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.57 cputime=63.062 memavail=713444 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1409.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5487 bytes_read=8146 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996841 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.57 cputime=63.094 memavail=713192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1410.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5493 bytes_read=8309 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996851 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.57 cputime=63.126 memavail=713192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1411.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5499 bytes_read=8457 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996884 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.52 cputime=63.157 memavail=713196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1412.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5505 bytes_read=8634 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996865 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=27.0  sysload=0.52 cputime=63.189 memavail=713328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1413.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5511 bytes_read=8811 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996862 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.1  sysload=0.52 cputime=63.221 memavail=713104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1414.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5517 bytes_read=8959 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.52 cputime=63.252 memavail=713108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1415.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5523 bytes_read=9136 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996931 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.52 cputime=63.283 memavail=713308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1416.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5529 bytes_read=9299 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.48 cputime=63.315 memavail=712888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1417.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5535 bytes_read=9447 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996906 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.48 cputime=63.345 memavail=712868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 1418.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5541 bytes_read=9630 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.48 cputime=63.377 memavail=711976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1419.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5547 bytes_read=9784 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996907 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.48 cputime=63.408 memavail=712260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1420.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5553 bytes_read=9932 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996905 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.48 cputime=63.439 memavail=712212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1421.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5559 bytes_read=10109 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996910 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.8  sysload=0.44 cputime=63.471 memavail=712772 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1422.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5565 bytes_read=10272 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.44 cputime=63.502 memavail=712976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1423.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5571 bytes_read=10434 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.1  sysload=0.44 cputime=63.533 memavail=712936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1424.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5577 bytes_read=10611 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.2  sysload=0.44 cputime=63.564 memavail=712936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1425.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5583 bytes_read=10774 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997000 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.44 cputime=63.595 memavail=713692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 1426.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5589 bytes_read=10922 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996993 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.57 cputime=63.626 memavail=714196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1427.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5595 bytes_read=11099 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996985 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.57 cputime=63.658 memavail=714448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1428.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5601 bytes_read=11276 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996976 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.1  sysload=0.57 cputime=63.689 memavail=714460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1429.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5607 bytes_read=11424 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996972 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.1  sysload=0.57 cputime=63.720 memavail=714484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1430.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5613 bytes_read=11601 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996971 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=27.0  sysload=0.57 cputime=63.752 memavail=715244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1431.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5619 bytes_read=11764 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997010 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.9  sysload=0.52 cputime=63.783 memavail=714796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1432.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5625 bytes_read=11927 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.1  sysload=0.52 cputime=63.817 memavail=715600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1433.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5637 bytes_read=12134 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=27.1  sysload=0.52 cputime=63.850 memavail=716308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1434.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5643 bytes_read=12282 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997004 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.52 cputime=63.881 memavail=716812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 1435.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5649 bytes_read=12445 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=27.2  sysload=0.52 cputime=63.913 memavail=716612 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 1436.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5655 bytes_read=12622 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0  sysload=0.64 cputime=63.945 memavail=716360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-200-g7511151a'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri May 19 13:17:10 2023 (1684502230.8 17.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PB6
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
mcu 'mcu': got {'count': 298, 'sum': 388010, 'sumsq': 3065455, '#name': 'stats', '#sent_time': 22.674252176, '#receive_time': 22.720291801}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 23.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5379 bytes_read=6207 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=281 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=5 upcoming_bytes=10 freq=168004537 heater_bed: target=0 temp=0.0 pwm=0.000 mcu_temp: temp=0.0  sysload=2.15 cputime=5.843 memavail=748688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 24.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5425 bytes_read=6346 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=167998142 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.2  sysload=2.15 cputime=5.866 memavail=746232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
webhooks client 281473422509680: New connection
webhooks client 281473422509680: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Stats 25.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5462 bytes_read=6533 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996697 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=25.8  sysload=2.30 cputime=5.910 memavail=743336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473422509680
webhooks: registering remote method 'reboot_machine' for connection id: 281473422509680
webhooks: registering remote method 'pause_job_queue' for connection id: 281473422509680
Stats 26.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5468 bytes_read=6696 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167998456 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.0  sysload=2.30 cputime=5.951 memavail=741824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
webhooks: registering remote method 'start_job_queue' for connection id: 281473422509680
Stats 27.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=5474 bytes_read=6844 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997809 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.2  sysload=2.30 cputime=6.040 memavail=738368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 28.5: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000075 mcu_task_stddev=0.000223 bytes_write=5480 bytes_read=7038 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997548 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.2  sysload=2.30 cputime=6.076 memavail=738500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 29.5: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000075 mcu_task_stddev=0.000223 bytes_write=5486 bytes_read=7201 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997243 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.1  sysload=2.30 cputime=6.113 memavail=728124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 30.5: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000075 mcu_task_stddev=0.000223 bytes_write=5492 bytes_read=7349 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997193 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.0  sysload=2.52 cputime=6.152 memavail=721552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 31.5: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000075 mcu_task_stddev=0.000223 bytes_write=5498 bytes_read=7526 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997108 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.2  sysload=2.52 cputime=6.194 memavail=722608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 32.5: gcodein=0  mcu: mcu_awake=0.047 mcu_task_avg=0.000075 mcu_task_stddev=0.000223 bytes_write=5504 bytes_read=7689 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997054 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.2  sysload=2.52 cputime=6.237 memavail=722780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 33.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5510 bytes_read=7851 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996981 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.2  sysload=2.52 cputime=6.268 memavail=722652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 34.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5516 bytes_read=8028 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996936 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.2  sysload=2.52 cputime=6.300 memavail=723940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 35.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5522 bytes_read=8191 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997130 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.4  sysload=2.32 cputime=6.332 memavail=723640 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 36.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5528 bytes_read=8339 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997057 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.2  sysload=2.32 cputime=6.362 memavail=723720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 37.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5534 bytes_read=8516 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997011 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.2  sysload=2.32 cputime=6.395 memavail=723472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 38.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5540 bytes_read=8693 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.2  sysload=2.32 cputime=6.431 memavail=720712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 39.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5546 bytes_read=8841 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996991 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.3  sysload=2.32 cputime=6.471 memavail=718356 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 40.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5552 bytes_read=9018 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996999 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.3  sysload=2.21 cputime=6.512 memavail=727048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 41.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5558 bytes_read=9181 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997019 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.2  sysload=2.21 cputime=6.554 memavail=724780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 42.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5564 bytes_read=9344 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.3  sysload=2.21 cputime=6.586 memavail=724816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 43.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5570 bytes_read=9535 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.2  sysload=2.21 cputime=6.620 memavail=725080 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 44.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5576 bytes_read=9683 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997001 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.3  sysload=2.21 cputime=6.653 memavail=725376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 45.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5582 bytes_read=9846 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.3  sysload=2.03 cputime=6.685 memavail=725164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 46.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5588 bytes_read=10023 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996995 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.4  sysload=2.03 cputime=6.725 memavail=724656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 47.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5600 bytes_read=10187 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997027 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.3  sysload=2.03 cputime=6.764 memavail=717872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 48.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5606 bytes_read=10359 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997023 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.3  sysload=2.03 cputime=6.806 memavail=719796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 49.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5612 bytes_read=10524 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997024 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.4  sysload=2.03 cputime=6.844 memavail=727096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 50.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5618 bytes_read=10670 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997022 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.6  sysload=1.87 cputime=6.882 memavail=726920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 51.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5624 bytes_read=10833 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997055 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.4  sysload=1.87 cputime=6.915 memavail=726976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 52.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5630 bytes_read=11010 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997041 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.4  sysload=1.87 cputime=6.947 memavail=727484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 53.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5636 bytes_read=11172 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997034 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.7  sysload=1.87 cputime=6.977 memavail=727456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 54.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5642 bytes_read=11335 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997038 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.5  sysload=1.87 cputime=7.008 memavail=728572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 55.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5648 bytes_read=11512 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997037 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.5  sysload=1.72 cputime=7.042 memavail=725288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 56.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5654 bytes_read=11660 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997044 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.6  sysload=1.72 cputime=7.080 memavail=725924 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 57.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5660 bytes_read=11823 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997043 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=26.5  sysload=1.72 cputime=7.123 memavail=723784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 333.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7353 bytes_read=57387 bytes_retransmit=9 bytes_invalid=0 send_seq=605 receive_seq=605 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997070 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=27.2  sysload=0.16 cputime=15.835 memavail=728412 print_time=336.786 buffer_time=0.850 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 281473422509680: Disconnected
Restarting printer
Start printer at Fri May 19 14:22:20 2023 (1684506140.3 335.7)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473422898752: New connection
webhooks client 281473422898752: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-122-ge6ef48cd / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281473422898752: Disconnected
Restarting printer
Start printer at Fri May 19 14:24:48 2023 (1684506288.4 483.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473423195344: New connection
webhooks client 281473423195344: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-122-ge6ef48cd / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281473423195344: Disconnected
Restarting printer
Start printer at Fri May 19 14:27:19 2023 (1684506439.7 635.1)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host: PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473423119408: New connection
webhooks client 281473423119408: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-122-ge6ef48cd / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281473423119408: Disconnected
Restarting printer
Start printer at Fri May 19 14:30:13 2023 (1684506613.2 808.7)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PB6
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473422850416: New connection
webhooks client 281473422850416: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-122-ge6ef48cd / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 812.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=4768 bytes_read=6108 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=259 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=502 upcoming_bytes=65 freq=167997250 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=798 bytes_read=4411 bytes_retransmit=0 bytes_invalid=0 send_seq=109 receive_seq=109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996710 adj=50002732 heater_bed: target=0 temp=0.0 pwm=0.000 mcu_temp: temp=0.0  sysload=0.21 cputime=34.376 memavail=717680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473422850416
webhooks: registering remote method 'reboot_machine' for connection id: 281473422850416
webhooks: registering remote method 'pause_job_queue' for connection id: 281473422850416
webhooks: registering remote method 'start_job_queue' for connection id: 281473422850416
Stats 813.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=5404 bytes_read=6283 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995872 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=804 bytes_read=4442 bytes_retransmit=0 bytes_invalid=0 send_seq=110 receive_seq=110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999469 adj=49995885 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.8  sysload=0.21 cputime=34.441 memavail=717212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 814.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=5453 bytes_read=6466 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995738 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=810 bytes_read=4458 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998668 adj=50000953 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.21 cputime=34.496 memavail=717252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 815.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=5459 bytes_read=6614 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995716 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=816 bytes_read=4474 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998712 adj=49999686 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=34.528 memavail=717504 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 816.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=5465 bytes_read=6791 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996214 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=822 bytes_read=4490 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998743 adj=49999849 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=34.561 memavail=717532 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 817.9: gcodein=0  mcu: mcu_awake=0.045 mcu_task_avg=0.000125 mcu_task_stddev=0.000286 bytes_write=5471 bytes_read=6971 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996215 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=828 bytes_read=4506 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999217 adj=49999606 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=34.595 memavail=717536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 818.9: gcodein=0  mcu: mcu_awake=0.045 mcu_task_avg=0.000125 mcu_task_stddev=0.000286 bytes_write=5477 bytes_read=7119 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996337 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=834 bytes_read=4535 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999272 adj=50000817 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.20 cputime=34.630 memavail=717296 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 819.9: gcodein=0  mcu: mcu_awake=0.045 mcu_task_avg=0.000125 mcu_task_stddev=0.000286 bytes_write=5483 bytes_read=7296 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996395 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=840 bytes_read=4551 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999206 adj=50000742 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.20 cputime=34.664 memavail=717100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 820.9: gcodein=0  mcu: mcu_awake=0.045 mcu_task_avg=0.000125 mcu_task_stddev=0.000286 bytes_write=5489 bytes_read=7459 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996473 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=846 bytes_read=4567 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999170 adj=50000405 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.0  sysload=0.26 cputime=34.696 memavail=716848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 821.9: gcodein=0  mcu: mcu_awake=0.045 mcu_task_avg=0.000125 mcu_task_stddev=0.000286 bytes_write=5495 bytes_read=7607 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996504 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=852 bytes_read=4583 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999140 adj=50000188 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.26 cputime=34.729 memavail=716848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 822.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5501 bytes_read=7798 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996547 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=858 bytes_read=4599 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999149 adj=50000065 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.26 cputime=34.764 memavail=716880 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 823.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5507 bytes_read=7961 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996597 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=864 bytes_read=4628 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999127 adj=50000079 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.26 cputime=34.798 memavail=717404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 824.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5513 bytes_read=8109 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996665 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=870 bytes_read=4644 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999110 adj=49999960 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.26 cputime=34.831 memavail=717952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 825.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5519 bytes_read=8286 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996693 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=876 bytes_read=4660 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999110 adj=49999854 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.40 cputime=34.865 memavail=718240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 826.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5525 bytes_read=8449 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996790 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=882 bytes_read=4676 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999115 adj=49999882 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.2  sysload=0.40 cputime=34.898 memavail=718996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 827.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5531 bytes_read=8611 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996789 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=888 bytes_read=4692 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999099 adj=49999824 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.40 cputime=34.932 memavail=718944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 828.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5537 bytes_read=8788 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996801 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=894 bytes_read=4721 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999106 adj=49999816 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.40 cputime=34.965 memavail=719040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 829.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5543 bytes_read=8951 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996805 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=900 bytes_read=4737 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999094 adj=49999894 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.40 cputime=35.003 memavail=718384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 830.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5549 bytes_read=9099 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996820 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=906 bytes_read=4753 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999112 adj=49999866 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.37 cputime=35.041 memavail=718404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 831.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5555 bytes_read=9276 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996830 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=912 bytes_read=4769 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999108 adj=49999981 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.37 cputime=35.080 memavail=718660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 832.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5561 bytes_read=9450 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996840 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=918 bytes_read=4785 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999108 adj=49999963 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.37 cputime=35.120 memavail=718660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 833.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5567 bytes_read=9588 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996845 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=924 bytes_read=4814 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999116 adj=49999967 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.37 cputime=35.157 memavail=717904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 834.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5573 bytes_read=9762 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996856 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=930 bytes_read=4830 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999121 adj=50000026 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.37 cputime=35.195 memavail=718720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 835.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5579 bytes_read=9925 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996867 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=936 bytes_read=4846 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999124 adj=50000045 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.34 cputime=35.233 memavail=718308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 836.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5585 bytes_read=10073 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996875 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=942 bytes_read=4862 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999133 adj=49999757 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.1  sysload=0.34 cputime=35.270 memavail=717808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 837.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5591 bytes_read=10264 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996887 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=948 bytes_read=4878 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999144 adj=49999878 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.34 cputime=35.308 memavail=717808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 838.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5597 bytes_read=10427 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996909 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=954 bytes_read=4907 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999156 adj=49999974 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.34 cputime=35.345 memavail=717312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 839.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5603 bytes_read=10575 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996911 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=960 bytes_read=4923 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999182 adj=50000035 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.34 cputime=35.381 memavail=717608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 840.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5609 bytes_read=10752 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996920 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=966 bytes_read=4939 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999192 adj=50000221 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.31 cputime=35.418 memavail=717360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 841.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5615 bytes_read=10915 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996932 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=972 bytes_read=4955 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999204 adj=50000238 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.31 cputime=35.453 memavail=717360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 842.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5621 bytes_read=11063 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996937 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=978 bytes_read=4971 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999209 adj=50000267 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.2  sysload=0.31 cputime=35.489 memavail=717612 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 843.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5627 bytes_read=11254 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996948 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=984 bytes_read=5000 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999221 adj=50000256 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.31 cputime=35.527 memavail=717372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 844.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5633 bytes_read=11417 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996954 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=990 bytes_read=5016 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999233 adj=50000294 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.1  sysload=0.31 cputime=35.563 memavail=717456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 845.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5639 bytes_read=11565 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996983 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=996 bytes_read=5032 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999242 adj=50000332 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.29 cputime=35.599 memavail=718240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 846.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5645 bytes_read=11742 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996990 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=1008 bytes_read=5064 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999263 adj=50000280 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.29 cputime=35.636 memavail=717900 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 847.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5651 bytes_read=11905 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996990 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=1014 bytes_read=5080 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999270 adj=50000398 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.29 cputime=35.672 memavail=717900 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 848.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5657 bytes_read=12067 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996994 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1020 bytes_read=5109 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999279 adj=50000394 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.29 cputime=35.710 memavail=717648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 849.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5663 bytes_read=12244 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1026 bytes_read=5125 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999291 adj=50000403 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.29 cputime=35.747 memavail=717948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 850.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5669 bytes_read=12407 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996996 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1032 bytes_read=5141 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999301 adj=50000444 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.2  sysload=0.26 cputime=35.783 memavail=717952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 851.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5675 bytes_read=12555 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996997 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1038 bytes_read=5157 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999327 adj=50000464 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.26 cputime=35.819 memavail=718208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 852.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5681 bytes_read=12732 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1044 bytes_read=5173 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999334 adj=50000622 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.2  sysload=0.26 cputime=35.856 memavail=717988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 853.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5687 bytes_read=12909 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997005 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1050 bytes_read=5202 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999342 adj=50000558 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.26 cputime=35.894 memavail=718248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 854.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5693 bytes_read=13057 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997006 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1056 bytes_read=5218 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999352 adj=50000235 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.26 cputime=35.930 memavail=717824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 855.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5699 bytes_read=13234 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997007 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1062 bytes_read=5234 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999360 adj=50000327 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.24 cputime=35.968 memavail=717828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 856.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5705 bytes_read=13397 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997008 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1068 bytes_read=5250 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999368 adj=50000376 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.24 cputime=36.004 memavail=718080 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 857.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5711 bytes_read=13545 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997012 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1074 bytes_read=5266 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999384 adj=50000414 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.24 cputime=36.041 memavail=718332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 858.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5717 bytes_read=13728 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997017 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1080 bytes_read=5295 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999393 adj=50000518 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.24 cputime=36.080 memavail=718524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 859.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5723 bytes_read=13883 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997018 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1086 bytes_read=5311 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999399 adj=50000535 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.24 cputime=36.116 memavail=717828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 860.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5729 bytes_read=14031 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997016 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1092 bytes_read=5327 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999405 adj=50000524 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9  sysload=0.22 cputime=36.152 memavail=718584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 861.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5735 bytes_read=14208 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997015 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1098 bytes_read=5343 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999410 adj=50000526 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.22 cputime=36.188 memavail=718840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 862.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5741 bytes_read=14371 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997043 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1104 bytes_read=5359 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999415 adj=50000529 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.1  sysload=0.22 cputime=36.224 memavail=719096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 863.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5747 bytes_read=14533 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997041 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1110 bytes_read=5388 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999420 adj=50000432 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.22 cputime=36.260 memavail=718848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 864.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5753 bytes_read=14710 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997044 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1116 bytes_read=5404 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999426 adj=50000458 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.0  sysload=0.22 cputime=36.298 memavail=717932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 866.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5759 bytes_read=14873 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997053 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1122 bytes_read=5420 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999431 adj=50000472 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.2  sysload=0.20 cputime=36.334 memavail=716952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 867.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5765 bytes_read=15021 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997050 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1128 bytes_read=5436 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999438 adj=50000456 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1  sysload=0.20 cputime=36.369 memavail=716700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-200-g7511151a'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri May 19 14:47:31 2023 (1684507651.3 1846.7)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PB6
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473237501936: New connection
webhooks client 281473237501936: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
mcu 'mcu': got {'oid': 21, 'next_clock': 3326188160, 'value': 7653, '#name': 'analog_in_state', '#sent_time': 1849.816777673, '#receive_time': 1849.834045298}
mcu 'mcu': got {'oid': 25, 'next_clock': 3332908160, 'value': 31453, '#name': 'analog_in_state', '#sent_time': 1849.870339506, '#receive_time': 1849.874055048}
mcu 'mcu': got {'oid': 15, 'next_clock': 3366508160, 'value': 31454, '#name': 'analog_in_state', '#sent_time': 1850.027852798, '#receive_time': 1850.074053131}
mcu 'mcu': got {'oid': 21, 'next_clock': 3376588160, 'value': 7653, '#name': 'analog_in_state', '#sent_time': 1850.132377964, '#receive_time': 1850.134067548}
mcu 'mcu': got {'oid': 25, 'next_clock': 3383308160, 'value': 31451, '#name': 'analog_in_state', '#sent_time': 1850.132377964, '#receive_time': 1850.174062381}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
mcu 'mcu': got {'oid': 15, 'next_clock': 3416908160, 'value': 31453, '#name': 'analog_in_state', '#sent_time': 1850.242216965, '#receive_time': 1850.374118548}
mcu 'mcu': got {'oid': 21, 'next_clock': 3426988160, 'value': 7649, '#name': 'analog_in_state', '#sent_time': 1850.242216965, '#receive_time': 1850.434045715}
mcu 'mcu': got {'oid': 25, 'next_clock': 3433708160, 'value': 31450, '#name': 'analog_in_state', '#sent_time': 1850.242216965, '#receive_time': 1850.474034673}
mcu 'mcu': got {'oid': 15, 'next_clock': 3467308160, 'value': 31452, '#name': 'analog_in_state', '#sent_time': 1850.242216965, '#receive_time': 1850.674044715}
mcu 'mcu': got {'oid': 21, 'next_clock': 3477388160, 'value': 7654, '#name': 'analog_in_state', '#sent_time': 1850.242216965, '#receive_time': 1850.734045131}
mcu 'mcu': got {'oid': 25, 'next_clock': 3484108160, 'value': 31451, '#name': 'analog_in_state', '#sent_time': 1850.242216965, '#receive_time': 1850.774044756}
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 281473237501936
webhooks: registering remote method 'reboot_machine' for connection id: 281473237501936
webhooks: registering remote method 'pause_job_queue' for connection id: 281473237501936
webhooks: registering remote method 'start_job_queue' for connection id: 281473237501936
Stats 1877.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5401 bytes_read=10520 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167996612 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=954 bytes_read=4943 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999654 adj=50000570 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.5  sysload=0.43 cputime=5.479 memavail=704448 print_time=1069.630 buffer_time=0.059 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281473237501936: Disconnected
Restarting printer
Start printer at Fri May 19 14:48:03 2023 (1684507683.2 1878.6)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281473238937808: New connection
webhooks client 281473238937808: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-200-g7511151a'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri May 19 14:49:53 2023 (1684507793.8 1989.2)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472795305968: New connection
webhooks client 281472795305968: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
mcu 'mcu': got {'oid': 15, 'next_clock': 2148530816, 'value': 31452, '#name': 'analog_in_state', '#sent_time': 1992.329661366, '#receive_time': 1992.369436282}
mcu 'mcu': got {'oid': 20, 'next_clock': 2156930816, 'value': 7646, '#name': 'analog_in_state', '#sent_time': 1992.383340199, '#receive_time': 1992.419453907}
mcu 'mcu': got {'oid': 24, 'next_clock': 2163650816, 'value': 31451, '#name': 'analog_in_state', '#sent_time': 1992.436519449, '#receive_time': 1992.459437324}
mcu 'mcu': got {'oid': 15, 'next_clock': 2198930816, 'value': 31449, '#name': 'analog_in_state', '#sent_time': 1992.645761366, '#receive_time': 1992.669430824}
mcu 'mcu': got {'oid': 20, 'next_clock': 2207330816, 'value': 7647, '#name': 'analog_in_state', '#sent_time': 1992.697771741, '#receive_time': 1992.719432574}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
mcu 'mcu': got {'oid': 24, 'next_clock': 2214050816, 'value': 31452, '#name': 'analog_in_state', '#sent_time': 1992.755419241, '#receive_time': 1992.759456991}
mcu 'mcu': got {'oid': 15, 'next_clock': 2249330816, 'value': 31452, '#name': 'analog_in_state', '#sent_time': 1992.755419241, '#receive_time': 1992.969442324}
mcu 'mcu': got {'oid': 20, 'next_clock': 2257730816, 'value': 7646, '#name': 'analog_in_state', '#sent_time': 1992.755419241, '#receive_time': 1993.019502074}
mcu 'mcu': got {'oid': 24, 'next_clock': 2264450816, 'value': 31452, '#name': 'analog_in_state', '#sent_time': 1992.755419241, '#receive_time': 1993.059463783}
mcu 'mcu': got {'oid': 15, 'next_clock': 2299730816, 'value': 31450, '#name': 'analog_in_state', '#sent_time': 1992.755419241, '#receive_time': 1993.269443824}
mcu 'mcu': got {'oid': 20, 'next_clock': 2308130816, 'value': 7649, '#name': 'analog_in_state', '#sent_time': 1992.755419241, '#receive_time': 1993.319450741}
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu 'mcu': got {'oid': 24, 'next_clock': 2314850816, 'value': 31453, '#name': 'analog_in_state', '#sent_time': 1993.357971408, '#receive_time': 1993.359401824}
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
MCU 'host' shutdown: oids already allocated
clocksync state: mcu_freq=50000000 last_clock=5766960990 clock_est=(1993.010 5749515663 50001982.241) min_half_rtt=0.000096 min_rtt_time=1993.200 time_avg=1993.010(0.018) clock_avg=5749515663.139(888384.101) pred_variance=1842792888.825 clock_adj=(0.414 50002615.000)
Dumping serial stats: bytes_write=781 bytes_read=4425 bytes_retransmit=0 bytes_invalid=0 send_seq=102 receive_seq=102 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 91 messages
Sent 0 1992.755777 1992.755777 8: seq: 1b, identify offset=0 count=40
Sent 1 1992.757438 1992.757438 8: seq: 1c, identify offset=40 count=40
Sent 2 1992.758605 1992.758605 8: seq: 1d, identify offset=80 count=40
Sent 3 1992.759761 1992.759761 9: seq: 1e, identify offset=120 count=40
Sent 4 1992.762184 1992.762184 9: seq: 1f, identify offset=160 count=40
Sent 5 1992.763357 1992.763357 9: seq: 10, identify offset=200 count=40
Sent 6 1992.764535 1992.764535 9: seq: 11, identify offset=240 count=40
Sent 7 1992.765638 1992.765638 9: seq: 12, identify offset=280 count=40
Sent 8 1992.766722 1992.766722 9: seq: 13, identify offset=320 count=40
Sent 9 1992.767807 1992.767807 9: seq: 14, identify offset=360 count=40
Sent 10 1992.768945 1992.768945 9: seq: 15, identify offset=400 count=40
Sent 11 1992.770037 1992.770037 9: seq: 16, identify offset=440 count=40
Sent 12 1992.771120 1992.771120 9: seq: 17, identify offset=480 count=40
Sent 13 1992.772267 1992.772267 9: seq: 18, identify offset=520 count=40
Sent 14 1992.773361 1992.773361 9: seq: 19, identify offset=560 count=40
Sent 15 1992.774443 1992.774443 9: seq: 1a, identify offset=600 count=40
Sent 16 1992.775518 1992.775518 9: seq: 1b, identify offset=640 count=40
Sent 17 1992.776678 1992.776678 9: seq: 1c, identify offset=680 count=40
Sent 18 1992.777771 1992.777771 9: seq: 1d, identify offset=720 count=40
Sent 19 1992.778858 1992.778858 9: seq: 1e, identify offset=760 count=40
Sent 20 1992.780050 1992.780050 9: seq: 1f, identify offset=800 count=40
Sent 21 1992.781163 1992.781163 9: seq: 10, identify offset=840 count=40
Sent 22 1992.782257 1992.782257 9: seq: 11, identify offset=880 count=40
Sent 23 1992.783343 1992.783343 9: seq: 12, identify offset=920 count=40
Sent 24 1992.784502 1992.784502 9: seq: 13, identify offset=960 count=40
Sent 25 1992.785596 1992.785596 9: seq: 14, identify offset=1000 count=40
Sent 26 1992.786679 1992.786679 9: seq: 15, identify offset=1040 count=40
Sent 27 1992.787770 1992.787770 9: seq: 16, identify offset=1080 count=40
Sent 28 1992.789081 1992.789081 9: seq: 17, identify offset=1120 count=40
Sent 29 1992.790212 1992.790212 9: seq: 18, identify offset=1160 count=40
Sent 30 1992.791322 1992.791322 9: seq: 19, identify offset=1200 count=40
Sent 31 1992.792490 1992.792490 9: seq: 1a, identify offset=1240 count=40
Sent 32 1992.793598 1992.793598 9: seq: 1b, identify offset=1280 count=40
Sent 33 1992.794731 1992.794731 9: seq: 1c, identify offset=1320 count=40
Sent 34 1992.796115 1992.796115 9: seq: 1d, identify offset=1360 count=40
Sent 35 1992.798404 1992.798404 9: seq: 1e, identify offset=1400 count=40
Sent 36 1992.799824 1992.799824 9: seq: 1f, identify offset=1440 count=40
Sent 37 1992.801069 1992.801069 9: seq: 10, identify offset=1480 count=40
Sent 38 1992.802261 1992.802261 9: seq: 11, identify offset=1520 count=40
Sent 39 1992.803444 1992.803444 9: seq: 12, identify offset=1560 count=40
Sent 40 1992.804699 1992.804699 9: seq: 13, identify offset=1600 count=40
Sent 41 1992.805884 1992.805884 9: seq: 14, identify offset=1640 count=40
Sent 42 1992.807075 1992.807075 9: seq: 15, identify offset=1680 count=40
Sent 43 1992.808326 1992.808326 9: seq: 16, identify offset=1720 count=40
Sent 44 1992.809520 1992.809520 9: seq: 17, identify offset=1760 count=40
Sent 45 1992.810690 1992.810690 9: seq: 18, identify offset=1800 count=40
Sent 46 1992.811865 1992.811865 9: seq: 19, identify offset=1840 count=40
Sent 47 1992.813115 1992.813115 9: seq: 1a, identify offset=1880 count=40
Sent 48 1992.814314 1992.814314 9: seq: 1b, identify offset=1920 count=40
Sent 49 1992.815482 1992.815482 9: seq: 1c, identify offset=1960 count=40
Sent 50 1992.816736 1992.816736 9: seq: 1d, identify offset=2000 count=40
Sent 51 1992.817926 1992.817926 9: seq: 1e, identify offset=2040 count=40
Sent 52 1992.819158 1992.819158 9: seq: 1f, identify offset=2080 count=40
Sent 53 1992.820412 1992.820412 9: seq: 10, identify offset=2120 count=40
Sent 54 1992.821607 1992.821607 9: seq: 11, identify offset=2160 count=40
Sent 55 1992.822775 1992.822775 9: seq: 12, identify offset=2200 count=40
Sent 56 1992.824027 1992.824027 9: seq: 13, identify offset=2240 count=40
Sent 57 1992.825198 1992.825198 9: seq: 14, identify offset=2280 count=40
Sent 58 1992.826358 1992.826358 9: seq: 15, identify offset=2320 count=40
Sent 59 1992.827586 1992.827586 9: seq: 16, identify offset=2360 count=40
Sent 60 1992.828818 1992.828818 9: seq: 17, identify offset=2400 count=40
Sent 61 1992.829984 1992.829984 9: seq: 18, identify offset=2440 count=40
Sent 62 1992.831141 1992.831141 9: seq: 19, identify offset=2480 count=40
Sent 63 1992.832365 1992.832365 9: seq: 1a, identify offset=2520 count=40
Sent 64 1992.833521 1992.833521 9: seq: 1b, identify offset=2560 count=40
Sent 65 1992.834670 1992.834670 9: seq: 1c, identify offset=2600 count=40
Sent 66 1992.835824 1992.835824 9: seq: 1d, identify offset=2640 count=40
Sent 67 1992.837055 1992.837055 9: seq: 1e, identify offset=2680 count=40
Sent 68 1992.838259 1992.838259 9: seq: 1f, identify offset=2720 count=40
Sent 69 1992.839416 1992.839416 9: seq: 10, identify offset=2760 count=40
Sent 70 1992.840636 1992.840636 9: seq: 11, identify offset=2800 count=40
Sent 71 1992.841806 1992.841806 9: seq: 12, identify offset=2840 count=40
Sent 72 1992.842965 1992.842965 9: seq: 13, identify offset=2880 count=40
Sent 73 1992.844183 1992.844183 9: seq: 14, identify offset=2920 count=40
Sent 74 1992.845351 1992.845351 9: seq: 15, identify offset=2960 count=40
Sent 75 1992.846509 1992.846509 9: seq: 16, identify offset=3000 count=40
Sent 76 1992.847639 1992.847639 9: seq: 17, identify offset=3040 count=40
Sent 77 1992.848828 1992.848828 9: seq: 18, identify offset=3080 count=40
Sent 78 1992.849944 1992.849944 9: seq: 19, identify offset=3096 count=40
Sent 79 1992.940296 1992.940296 6: seq: 1a, get_uptime
Sent 80 1992.993195 1992.993195 6: seq: 1b, get_clock
Sent 81 1993.044938 1993.044938 6: seq: 1c, get_clock
Sent 82 1993.097194 1993.097194 6: seq: 1d, get_clock
Sent 83 1993.148718 1993.148718 6: seq: 1e, get_clock
Sent 84 1993.200305 1993.200305 6: seq: 1f, get_clock
Sent 85 1993.251820 1993.251820 6: seq: 10, get_clock
Sent 86 1993.303455 1993.303455 6: seq: 11, get_clock
Sent 87 1993.355249 1993.355249 6: seq: 12, get_clock
Sent 88 1993.359022 1993.359022 6: seq: 13, get_clock
Sent 89 1993.378847 1993.378847 6: seq: 14, get_config
Sent 90 1993.381413 1993.381413 7: seq: 15, allocate_oids count=1
Dumping receive queue 94 messages
Receive: 0 1992.754142 0.000000 13: seq: 1b, stats count=54 sum=20267 sumsq=109395
Receive: 1 1992.754144 0.000000 12: seq: 1b, stats count=50 sum=11587 sumsq=22511
Receive: 2 1992.754145 0.000000 13: seq: 1b, stats count=50 sum=12601 sumsq=24874
Receive: 3 1992.756081 1992.755777 48: seq: 1c, identify_response offset=0 data=b'x\xda\xa5\x1ako\xdc\xb8\xf1\xaf\xb0\x0b\x04\xb9\x14\xb6o\xf5\xdc]\x03\xf9\xe08\xb9C\xd0\xba\xc9\x9d\x13\xb4@q\x10d\x89\xbbKX'
Receive: 4 1992.757632 1992.757438 48: seq: 1d, identify_response offset=40 data=b'\xaf\x13%?z\xf0\x7f\xef\x0c\x87/i\xd7N\xda\xf3\x97\xa583\xe4p8o\xfa\x8f\xc5\xcd(\xaa2\xbb\xe3\xbd\x14m#\x17\xe7\x8b'
Receive: 5 1992.758777 1992.758605 48: seq: 1e, identify_response offset=80 data=b']Q\x9c\xb3\x1f\xde\xf3\x1b\x917,X\x9e\x85g\xc1i\xfaF\x8fX\xb8\x0c\x83e\x10,\xd9\x8dh\xc6AT\x12p\x7f\xfe\xc7W\xf6'
Receive: 6 1992.759975 1992.759761 49: seq: 1f, identify_response offset=120 data=b'N\x7f\xb2m\xdb3"~\xc3\xc2\xb3(9\x0b\x17\'\x8b\xa2\xad\xeb\xbc)a\xf9?\x16yU\xb5E>\xf0\xac\x15\xa5dE;6\xc3'
Receive: 7 1992.762399 1992.762184 49: seq: 10, identify_response offset=160 data=b'\xdbW\xc5\xe2|}\x02\xbc\x0c\x030\x91\xe5\xc5-\x03(L{\xf04\xf6\x10\xca\xd2 t\xadT?\xa2y\xfbjd\xddXU\xd9\xd8'
Receive: 8 1992.763520 1992.763357 49: seq: 11, identify_response offset=200 data=b'\x11A\xea\x08~\x1fy\xffh\xd7\x04\x06n\x11\xbb\xe7r\xc8\x06Q\xdcJ\xfa\x1a\xfa\xbc\x91\xb5\x182\xb3+\x13\rHF\xef\x9f\xc09'
Receive: 9 1992.764695 1992.764535 49: seq: 12, identify_response offset=240 data=b"*\x9e\xf7\x99\xdc\x8fC\xd9\xde7\x8b\xf3\x10\x8f\xd6l\xc5\x0e8z\xa8\xa281[\xc8Nd4\\\x9c'\x81\xc3j\xf2\xaa\xdde\xa2"
Receive: 10 1992.765791 1992.765638 49: seq: 13, identify_response offset=280 data=b'\xb1\xdc+\xb6\x17\xe7\x91[I\xb3l0\xe83\xf3\xe4\xb0\xb2\xa8j\x92\xf7\xd3\xc5&2X\xc5\x16\xb9\x14;1\xe4U\xd6\x8e\xc3\x8c\xe0'
Receive: 11 1992.766874 1992.766722 49: seq: 14, identify_response offset=320 data=b'.\xafF\x8e\xdf%\xdf\xe6c5dv\xa2\xce\x1f\xb2r\xec\xf3\x01tC\xf1\x19\xb8\xcdK\x19\xaco\xc2\xa5=1\xefE^\xbd}\xf5'
Receive: 12 1992.767974 1992.767807 49: seq: 15, identify_response offset=360 data=b'W\xa9\xa8x\xdf\xb7\xbd\xc7\xf5zi\t9(\xc2\xd0v\x13&\x8a\t\xd7aj\x91\xf7e\x1c\xaf\xd6v\x97^f\x9ain\x06el'
Receive: 13 1992.769103 1992.768945 49: seq: 16, identify_response offset=400 data=b'G\x89\x1d\xa5v\xb4\xb2#^\xe5\x8f\xf6\xb6A\x8e\x91\xddD\x84\x85\xd9\x00\x86p\x03\xa4\x0f\xa0\xa4\xf8\x0b\xca\x06\x8aBD\xb1\x93g\xdd'
Receive: 14 1992.770188 1992.770037 49: seq: 17, identify_response offset=440 data=b'\x8d\x9b0Y\xfa\x84\xf6\xc6\x9d\x94\x1a\xdev\xe2\x81W3\x91\x97\xf9\x90gR\xfc\x076\xd8\x8f`KC\x86B\xf3TQr\x98\x12\x8d'
Receive: 15 1992.771278 1992.771120 49: seq: 18, identify_response offset=480 data=b'\xc7\xef\xca\xa9HW\xe4\x9bt\x9d8\x15Q&\x80|*\xf5\xde\xe7M\xc3+5|\x04\x8du\xcb\xea{\xdd\x8f\xf3\x9b\x86\x99\x83\xab^'
Receive: 16 1992.772423 1992.772267 49: seq: 19, identify_response offset=520 data=b'\xad\xdd~\xf7\xf5\x11\xb5\xf93\x8b\xc7NB\xea\xac\xb0]bg\xc0x\xe6[\xa1O\x18\xc4\x1d\xcf\xf6b\xb7W2\x8e\xd6>>X\xd6'
Receive: 17 1992.773512 1992.773361 49: seq: 1a, identify_response offset=560 data=b'\xae\xe2\x87\xd6\xc7,,\x1b\x1e;N\xb7\x13O(\x8d5\x1f#\xd6\xa0\xac\x96;\xd4l\xd85\x9a\xd0\xde\x8ba\x0f\x82\xc9\nc\xae\x80'
Receive: 18 1992.774597 1992.774443 49: seq: 1b, identify_response offset=600 data=b'\xe1N&\x87\xd5\xc6\x19HaUW\x16\xd5\xad\x1d\x8b\xd2\x0e\x1f\x9b"\x9bj)+\xea2;P\xdc\xa5\xb7\x03\xef:\xe7\x00\xf03\xd3'
Receive: 19 1992.775669 1992.775518 49: seq: 1c, identify_response offset=640 data=b'\xf6T\x8a\xde\x0c\xc9\x89)d\x875V\x92{\x8b\x86\xee`\xc3\x9e\xf7u\x0b\xa6\xdb\x1d\x95\xa8\x0fvB\x8d\x1dSC]\x8cyo\xb5'
Receive: 20 1992.776834 1992.776678 49: seq: 1d, identify_response offset=680 data=b'\xa5\x7f\xc8\x0e\x1c\x13\x1b\xec$\xea\xfe jNG\xdb\xb8Uz\x94\x87\x13+\xac_\xf2\x9b\x11,\xaa\xed\x16\xe7\x1b\xf3\x05\xab\xec\x945'
Receive: 21 1992.777924 1992.777771 49: seq: 1e, identify_response offset=720 data=b'\xd1\xfd\x04\x16\xad\xe79\xc4\x88\xbe\xe4\xbd\xb3\rt`\xa1A\xb8\xef\xc5\xc0\x0f0P\x8d\t\x11\xbc6\xafy\xbf\xe3M\xf1\x98\xa1\xc3\x02'
Receive: 22 1992.779049 1992.778858 49: seq: 1f, identify_response offset=760 data=b'&`\x8a\x9cW\xb6ok~\x10Od^w\xbeI\xe8o\x1bM\xa6\xf1\x06Xw\x9e\x96\x8eke\xdc\x8b\xdd\x8e\xf7x\x08\x89\x16\x83'
Receive: 23 1992.780202 1992.780050 49: seq: 10, identify_response offset=800 data=b'>1q\x9b\xabh\x06<\xe5\x03\xb7\x02\nA\xab\xb7\x02\xe2\x0b8\x95\x8cd\xc8\x8a\xbe \xb1\x9e,v\xe0O\x14\x9f\xa0\xff\xfaK\xe1'
Receive: 24 1992.781316 1992.781163 49: seq: 11, identify_response offset=840 data=b'\x80\xe1\xd1\xe7\xd8\xe1-\xc0E\x9e,\xb4\xcf\xcd$\xec\x97\x81\x06\xdaX\x84c\x92s\x1a\xce\xd0\xf0\n\x0c\x9a\xbb\x8e\x14\x84\x88\x8e\xb1n'
Receive: 25 1992.782411 1992.782257 49: seq: 12, identify_response offset=880 data=b'K\xb1}\xcc\xe0\xae\xedZ=W&\xc5tH\x05\x0e\x10Jd\xb1&\xa3;\x9c\xe2\xe3\\Vq\xedFBB\xd4w9\xdf>\x86\x0b'
Receive: 26 1992.783496 1992.783343 49: seq: 13, identify_response offset=920 data=b'\x13%o\x06\xd8\x9c\xb5\xdb-\xec\xa2\x8c\xcaF%\xd8\xc78hu\x0c+\xcd\xd5\xd2\x83\x8c]\xe9$M\t\xc7~\xf4\xb6Y\xc12t'
Receive: 27 1992.784655 1992.784502 49: seq: 14, identify_response offset=960 data=b'%\xb3,\xe0x\xa2\x017\xb0\x9c\x11\xa8\xbb\x1c\x9d\x13\x897\x16a\x9e1\xfc\x9f\xcaV;e\xd3\xfe\xd8}A\xd6\xb3\x03\xc2=/n'
Receive: 28 1992.785747 1992.785596 49: seq: 15, identify_response offset=1000 data=b'\xbd\x88\x1d\xd9S\xcd\xd2\x0c\xcbA\xd7\x82=\xcf\xf7\xf7\x02Vd\x16\x98\xa5\n\xcf\xe4_\x1e\x8b\xc2\xe7P\xc0RV\x1e\xb3\xa8\xfb\xac\x84'
Receive: 29 1992.786829 1992.786679 49: seq: 16, identify_response offset=1040 data=b'\xd3\x19\xc1\\\xc2Ib\x10\x0e\xa2\xc73\xec\xa1y@\xb0\x10[\x12ObOw\xcc_~\xfb\x88\x93K\xa0\x0f\xf0\xd3`\xbe\xa5\x7f\x07'
Receive: 30 1992.787981 1992.787770 49: seq: 17, identify_response offset=1080 data=b't\xee\x91\x1f\xcb\xde\xec\x1e\xad\x9f&\x04\x89!\xd1Y\xc2Q\x12{\xf9 \xdb\x95%\x98\x86\xf9c\xc8qj\x901\x8a\xd8\xdc\x07\xd5\x83'
Receive: 31 1992.789252 1992.789081 49: seq: 18, identify_response offset=1120 data=b'\x1c\xa71\xae\xbd\xca\x9b\xe0\x17n/\x04+\xa5\x8cF\x85\x1e\xb5\xee|\x13\xc0\x02\xa3@\x1c\xff\xa4\xb3\x04\x15N\x17\x1d )\xb6U.'
Receive: 32 1992.790364 1992.790212 49: seq: 19, identify_response offset=1160 data=b'b\xd7\x9c$&@\x94\x12Q\xc3\x1f4\x0b\x10\x1c\xad\xb7\x10=\xf9\xcf\x80\x90|\xa9\xfd\xef\x89\x15\x88Sof\x84\xf9\x8dd\tD\n'
Receive: 33 1992.791473 1992.791322 49: seq: 1a, identify_response offset=1200 data=b'\x17\xe6e)X\x82l\x9d\xb19/\x93\x84\x84\xe7\xf9)\x0f\x1a\xc5\x06:`\xfe\xea\xc7m\x9d\xce\x82\x0f\xe6^Z\x0b$\xa9#\x91\xed'
Receive: 34 1992.792651 1992.792490 49: seq: 1b, identify_response offset=1240 data=b'v\xb8\xcf{\xee\xd3\xd6B\xb6&J\xd7\xad\x14\xc7\xd2\x97\x83E\xe35-\xfa\xfc9"<\xaf\xca\x8c^\n0\xc9f\x8au<\xbe$'
Receive: 35 1992.793749 1992.793598 49: seq: 1c, identify_response offset=1280 data=b'\xb8\x1b\xe5@\x19\x061\xf0\xcd\x02sLk\xe6\xc1\xc6!\xa8\xd0\x89\xb6B\xc1\x95\xd9X\xebE^\xa0\x80%u\x063\x11\xb5\n16'
Receive: 36 1992.794947 1992.794731 49: seq: 1d, identify_response offset=1320 data=b"\x02Q%\x86\xa8D\x8d2D\x07q\xc4|@\xb5<\xbc\xc1\xcf\x8cx\xd7\xf6:,\x93\xafP\xdfVI\xf8C'\xe0J\xfc$`c"
Receive: 37 1992.796352 1992.796115 49: seq: 1e, identify_response offset=1360 data=b'W\x9a\x9d\xc2G\x02\x83\xa6\x90u\xcckx\xb6\x14?\x99l\x0b\xeb\xf2\x8b\xf7\x97\xd9\xd5\xc5\xbf0\x95\xdb\xc0\x15]\xfe\xfd\xd3\xe5\xdf\xb2'
Receive: 38 1992.798686 1992.798404 49: seq: 1f, identify_response offset=1400 data=b'\x9f~\xfd\xf0\x0b\xc6+\xfa;Y\\]~]\x9c/*(\xf6\x1f\xa0\xac\xff|y\xa1l\xc5\x90\x81B}\xfe\xe7\x15}F\xe1\n\xe5'
Receive: 39 1992.800053 1992.799824 49: seq: 10, identify_response offset=1440 data=b"s\xfd\xe5\xe2\xcbuv\xfd\xf5\xea\xfa\x97\xec\xdd\xc5\xf5\x07Ld\xd2'LeFH\xaeTA\xa0\xba\x02\xba\xee\xd2\xc3\xb3\xe5\xe2\xfc\xdf"
Receive: 40 1992.801260 1992.801069 49: seq: 11, identify_response offset=1480 data=b'\xcb\x93\xd5o\x80\t\x9a\xa6\xda\x06*\x10\xe2\xbc\xdah\xfd\x1b\xa4-\x9dh\t1\\\x9b\xefb/\xba\xe5\x8f\xcfA\x02\x0b\x81\xf9\x19,'
Receive: 41 1992.802450 1992.802261 49: seq: 12, identify_response offset=1520 data=b'\xb4\xb0\x04lx\n\x8b,l\x9d\xc63XlaA\x006:\x05&\x0e\x18\xc7snR\x07\\\x85svV\x8e\xd5e0\xe7g\xed'
Receive: 42 1992.803634 1992.803444 49: seq: 13, identify_response offset=1560 data=b'\x80\xd1\xd20\x04\x1e\x87N\x0f\x03\x04\xa5I\x02&\x1e\xa4\x0e\x14x `\xd5\x07\x85\x1e\x08\xee\xcd\x07E\x1eh\x1dO@\xb1\x03\xa5\xa0'
Receive: 43 1992.804890 1992.804699 49: seq: 14, identify_response offset=1600 data=b'\x1e>(\xf1@\xc1\x94\x8d\xd4\x03ES6V\x1e(Vl<M\xbc#\x94\x1bJ\x19\x82(\x8a\x16\xe7\xa0\x90\xb9L\x96\xf1\xaaT\xa9'
Receive: 44 1992.806072 1992.805884 49: seq: 15, identify_response offset=1640 data=b'\xdcP\xf1d\x19\x847\xa0c\x9aJk\x14\x0cK~\xb7\xd4Z\xa5\xf6\xa3\xa9@M\x81F\xfa\x93\xa1\x9aL\x82\xd0\x9f\x8c\xd4\xe4\xca\x88'
Receive: 45 1992.807261 1992.807075 49: seq: 16, identify_response offset=1680 data=b'\x86&c5\x19,\xc3\xd8\x9fMh6\\O\xb6Ji\xd6^\t\xcd\xaeh\x16\xfc\x9c9+\xa4)\x02\xfdD\x0f\x85M&Jm\x99'
Receive: 46 1992.808518 1992.808326 49: seq: 17, identify_response offset=1720 data=b'LY\xf0\x96R5j\x90\\T\x15\xd3\x06h"\x93d\xf5(\x07\xb6\xcf\xef8\x96i\x98\x92q?\xf2PbyQ\xa1\x07{d\xa6'
Receive: 47 1992.809703 1992.809520 49: seq: 18, identify_response offset=1760 data=b'Z()\xac^\xe6\rk\xda\x81\x81+c\x18\x0e\x18\xdc\x04\x113E\xcc\xee\xf7\x02\xc6\xe4Y$\xeb\xc07\x02\x8b\x14\xb7\x81\xf6\xf5\x80'
Receive: 48 1992.810875 1992.810690 49: seq: 19, identify_response offset=1800 data=b'q\x12\xea\xd9\x1d\xac\n\xbb\xe7\x03\x13\x92\xe5z/\xaa\xde\xa9\x8a\xd1\xc8\x12Q\xd1+Q\xadE\xb3*MP\xa9\x16l\xc7\x1bf\n\\'
Receive: 49 1992.812095 1992.811865 49: seq: 1a, identify_response offset=1840 data=b'K\x0fA\xf0\x92\x9a\x89\xac\xcb{\t \xd5iRe\x8c\x01\xf4\x1cR\x149\xa8\x96\xe2e;V%\x9dK\xb9\xde\xf7\xd7\xc1\xfa\x1d\xa4'
Receive: 50 1992.813307 1992.813115 49: seq: 1b, identify_response offset=1880 data=b'\xa2\xc8\x16\x10\x0f{\x1cPs\xe5\xbbP\xd9\x0f\xe01K\xc8x\xc4\xf0\x86R\xdc\xef$\xab\xc7\x81?X:\x88\xd6\x06oz\xb3X\x01'
Receive: 51 1992.814497 1992.814314 49: seq: 1c, identify_response offset=1920 data=b'\x1b\x08\x84\x1f\xd9\xf6\x90\xa1\x94Z4\x1dm\xcd\xa8RC\xf7\xfa\x01\x0f\xcf \xf4\rX\x07\xd7-\xb0\xd16B\x07\x1f\x8d\x87\xe5\t\xe1'
Receive: 52 1992.815667 1992.815482 49: seq: 1d, identify_response offset=1960 data=b"A`$7\xca\xe8\xd4\x89]\x01\xbfq\x85\xe9\xd6T\x07\xfd\xd4\xf6\x05\xb7\xbd\x10\xa6{\xb9T|\xfd\xfc\xf9\xe3'\x86\x86\xcb@\x99\x05"
Receive: 53 1992.816926 1992.816736 49: seq: 1e, identify_response offset=2000 data=b'\xa0\xa1\x1c\xb6\x90\x02\x96\xd4\xa8\xfcH)\xad\xb7.v\t\x99(O0Q\xd4rkA\x97T\xdfXsA\xcd\xa0\x17H\x95\x96#%'
Receive: 54 1992.818152 1992.817926 49: seq: 1f, identify_response offset=2040 data=b'\xdc\xc5\x90\x83@^\xff\xf8\x9a2/Cd\x9a\xa8\xae\xa7K\x89)\xa5\x1f\x06\xcb\x1ee2\x07h\xa8[`;\x90\xd5Rg\xc4\x00\xeb'
Receive: 55 1992.819350 1992.819158 49: seq: 10, identify_response offset=2080 data=b'\x16,K\xab\x17\xc3\xf6\x1dFQ\x07\xb6\xcd>\xdb\xde\xa3\xc6\xc8\x01\\W\x94v\x7f\xcc\xf3\r\x12X\x04#?\x87\xbd\n3kZ~'
Receive: 56 1992.820596 1992.820412 49: seq: 11, identify_response offset=2120 data=b'\xda\xd2\x19HKEr*r\xe7X\x06\xe4\x9d\x0b\x9bj&\xd8\x87\xab\xc9\xbc.\x7f\xd45\xd2\xce\x91w\xa8Iy\xe3\xe1`.r\x95'
Receive: 57 1992.821782 1992.821607 49: seq: 12, identify_response offset=2160 data=b'?\xa0\xee\xae\x8d\xbc\xa9\xfdu\xc5\xa5\xccw\x9c\xf1\xa6\x80\xf4\xd0\x18(\xdc\xce\x95\x90\x92\xc3\x96Pj\x96c\x85\xfa\x06\xc4\x98\x953\x9d'
Receive: 58 1992.822950 1992.822775 49: seq: 13, identify_response offset=2200 data=b'\xa8(c\xe0w\x1c/\n\x13\xf2\xe7\t\xf6y_*\x0f\xa5\xb1\xb1\x81\xfe<\xb6\x91\x8bF\xc6*\xe6\n\xafR\x952\x0cF\xfd\xb6j'
Receive: 59 1992.824197 1992.824027 49: seq: 14, identify_response offset=2240 data=b'\xef\xa9x\xfa\x95\xeb\x05`)4\xa0^Y\x1cx\xd3.G\x9f\x82\xbd\x89k\x8bp\xc07\xbb\x17\xe0\x97\xf9C\xc1\x01\xea\xb7=)\x17'
Receive: 60 1992.825373 1992.825198 49: seq: 15, identify_response offset=2280 data=b'u\x94\x13\x96^\xa0\xc2\x8e\xb3GeN\xfc\x02\x05\x16\xee\xd7|\xd0w\xa2\xd8F\x0cQ\x8f\xb5\x993\xb6\x00r\xb8\xb6v\x8d\x8d\x18X'
Receive: 61 1992.826529 1992.826358 49: seq: 16, identify_response offset=2320 data=b'L\xf9]\xe5\xce\xfcg\x8ek\xed\x88\x87\xb6e\xdb\\\xc9\x84\xe4\x81}\xa7/\xbe\x8ah\xbf\xa7Z\xc0\x94\xfb~QRDJpK\x92'
Receive: 62 1992.827757 1992.827586 49: seq: 17, identify_response offset=2360 data=b'\xab>\xda\x17\xf8\x02\xdd\x7f\xc4\xbe\xb9\xf6\x1d\x92\xaa\x07\x0bA\x8d\xb5\x10l\xa9\x7fm\xf2\x1b\x8cF\xadVd%\r\xc2\xa0\xae\xa8C\x00'
Receive: 63 1992.828995 1992.828818 49: seq: 18, identify_response offset=2400 data=b'M\x80\x8b\xc5\x15 a\x1a*\xaa\x9e\x1cXy\x9c\xb9\xef\xa2\x17\xa3\x19R^\x16\x16\x8c5\xc9\x1c\xacc\x81\x8d\xc4\x067^\x1d\xe0\xba'
Receive: 64 1992.830155 1992.829984 49: seq: 19, identify_response offset=2440 data=b'\x93\xd2\xe3\xc3\x1c\xecs\x04\xda\xcb\xe9\xc9k\x86\x85\x8av\x80\x96\x1c\xa09\xd9Q/\xc4\x81U4\x9a\xb0\x12\xf8`\x0c\xbf\xd7\x9f?\xaa'
Receive: 65 1992.831316 1992.831141 49: seq: 1a, identify_response offset=2480 data=b'\xc2\x8e\x9a\x1c\x870\xd9qL\x1a\x92x\x0el\xda\xe6\xf4\x06#\x8f\xb2\xbd\x19\x17\x13&\xb5\x034R\xd3\xfe*\x99\xdc!5\xf5p\xe9'
Receive: 66 1992.832537 1992.832365 49: seq: 1b, identify_response offset=2520 data=b'N\xd0+\x9a\x86\x11`r\x06\xb8]\xf5\xae\x98\x15\xfb\xb1\xb9\x05\xe5\x83T\xa5\xa4\xe7*o^:\x00\xc8\x84\xbc\x9e\x0e\xb2\xe8\xd4\xa1\xd8'
Receive: 67 1992.833691 1992.833521 49: seq: 1c, identify_response offset=2560 data=b"\x92\xac\x90LU\x1c^\xa7\x9f\x92\x92\xb6\xa9 \x8f\xb9\x83\x05\x88\t\x95\x9eX\x13\xd9\x1c4:\xcf\xd9'\xc8\x87\xa0\xcc\xb9\xc1*m\x8b"
Receive: 68 1992.834841 1992.834670 49: seq: 1d, identify_response offset=2600 data=b'\x8dn\xf9\x17jd\xab\x97O\x9b\x1a\xe9\xf7\xd0\x92\xba\xd7\x12\xdb\x95\xe8\xe1\xc9\xf7\x14\x00FPl\xabR\x15\\\x945Uy\x8f)\x03'
Receive: 69 1992.836043 1992.835824 49: seq: 1e, identify_response offset=2640 data=b"\xbe\x84\x1c\xa9\xf7\xd0\x84\xc9\x83\xe3+\x85\xce\xa0\xc8\xe3a\x95\x0b\xb9\xe6A'\x1f\x93M(\xde\xa2`\x9d$*\xbb\xd6\x1f\xa9J\xaf\xe9"
Receive: 70 1992.837272 1992.837055 49: seq: 1f, identify_response offset=2680 data=b'#M\x94?\x80\x8f4]\xc18zzR\xdd\x1d\xc8M$\xa7\x07^\xdd\xd3\xf4Kv\x891\xb3)\xf8\xacsz\x8a\xd28\xda\x03u'
Receive: 71 1992.838432 1992.838259 49: seq: 10, identify_response offset=2720 data=b"\xdd'\xddd3E15q\xfc\xe5n\xc6\xed\x96\x83\xe7B\xaa\xad\xd8\xb6\xf8[\t\xef\x19\x17\xbb,\xa7\xe8\x15m3u\xd2;\xa7%"
Receive: 72 1992.839587 1992.839416 49: seq: 11, identify_response offset=2760 data=b'\x8fu\xbb6\x91{A\x9eP\xe4^\xa7\x94)\x88>\x0fzC\xca\xbd\\\xf9\xbf\xb6\xaf\x99\xe0\x96t\xdb]\x9dPu\xe7q\xce\xa8\x91'
Receive: 73 1992.840810 1992.840636 49: seq: 12, identify_response offset=2800 data=b'\xea\xba@4\xf2\x19_\xab\xf7$\xd5\x80}\x89kM\xa1\x07\x99\xdb\xfd\x14\xe3\xa8y\x12\x91\xe0\x93\xed\x0b\xc7\x1a\x1fQ\xa83k@/'
Receive: 74 1992.841979 1992.841806 49: seq: 13, identify_response offset=2840 data=b'\tD\x90K\xd7\x8b.\xddk\xc4\x84\xab}[\x83\xf1\x1f.\xe2?v\x80`\xbd\x06\x7ff\x94\xc7\xb52\xe8\xdb\xa8H\xe8\x9a\xf8\x1e\xae'
Receive: 75 1992.843139 1992.842965 49: seq: 14, identify_response offset=2880 data=b'\xed\xe6\x936\x9d!.0\xe5I\x93\xcdk)-PX\xcf4\x85\xbfGE\xb1d9\xdaD\xfeS*:\x1eQQ\xac\xea\xec\xa3\xc3'
Receive: 76 1992.844356 1992.844183 49: seq: 15, identify_response offset=2920 data=b'\xf4F\xe4X\x14\xea\r\xba@<8\x01H\xc1\x7f\xf7Zc#\xccEr\xf3Dp\\\x00\x91_R\x7f\x97\x08V>\x85\xd7\x14\xf3\t'
Receive: 77 1992.845531 1992.845351 49: seq: 16, identify_response offset=2960 data=b'\x10o}\xac\x95yp\xc1~s\xdc\xbfi\xcc(\xfd\xde\xe174c\x13\xabr\xb9\x1fT\xc9\xb0\x0e\xa8x\x96\xce\x14\xe4X\xeb\x1f\xf9'
Receive: 78 1992.846680 1992.846509 49: seq: 17, identify_response offset=3000 data=b';i|\xec\xba\x81\xb3V!=\xeb@\x9c\xd9,g\x8e\xf1;Lc4\xa6\x81\xaa\x9d\xb8\xfe\xe1!\xff\xd89\xa4\xb3F~O\xd0\xd9'
Receive: 79 1992.847810 1992.847639 49: seq: 18, identify_response offset=3040 data=b'O\x91\xdb\x06\xe5\xd1\x87@\xcf\xaflB\xf4\xfb\xaaV\xa6W\xf1\xd1w:\t\xb8e\xfd_=\x8b\xf3\xc5\xdd\xf2,\x08\xce\x96`\xb7\xcb'
Receive: 80 1992.849003 1992.848828 25: seq: 19, identify_response offset=3080 data=b"\xd3\xdd*\t\x82 \t\xf2\xc5\xd3\x7f\x01'\xb3\xf7!"
Receive: 81 1992.850113 1992.849944 9: seq: 1a, identify_response offset=3096 data=b''
Receive: 82 1992.940467 1992.940296 12: seq: 1b, uptime high=1 clock=1451057418
Receive: 83 1992.993412 1992.993195 11: seq: 1c, clock clock=1453703165
Receive: 84 1993.045148 1993.044938 11: seq: 1d, clock clock=1456290309
Receive: 85 1993.097406 1993.097194 11: seq: 1e, clock clock=1458903107
Receive: 86 1993.148947 1993.148718 11: seq: 1f, clock clock=1461480028
Receive: 87 1993.200498 1993.200305 11: seq: 10, clock clock=1464058255
Receive: 88 1993.252054 1993.251820 11: seq: 11, clock clock=1466635043
Receive: 89 1993.303664 1993.303455 11: seq: 12, clock clock=1469215866
Receive: 90 1993.355460 1993.355249 11: seq: 13, clock clock=1471805961
Receive: 91 1993.359225 1993.359022 11: seq: 14, clock clock=1471993694
Receive: 92 1993.379064 1993.378847 10: seq: 15, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 93 1993.381736 1993.381413 12: seq: 16, shutdown clock=1473115204 static_string_id=oids already allocated
Transition to shutdown state: MCU 'host' shutdown: oids already allocated
Dumping 8 requests for client 281472795305968
Received 1991.968011: b'{"id": 281472967107536, "method": "info", "params": {"client_info": {"program": "Moonraker", "version": "v0.8.0-40-gb21f177"}}}'
Received 1992.031157: b'{"id": 281472967107536, "method": "list_endpoints", "params": {}}'
Received 1992.286806: b'{"id": 281472967107008, "method": "info", "params": {}}'
Received 1992.541886: b'{"id": 281472967106960, "method": "info", "params": {}}'
Received 1992.796303: b'{"id": 281472967107632, "method": "info", "params": {}}'
Received 1993.050972: b'{"id": 281472967109120, "method": "info", "params": {}}'
Received 1993.061454: b'{"id": 281472967411936, "method": "info", "params": {}}'
Received 1993.305666: b'{"id": 281472967107632, "method": "info", "params": {}}'
Reactor garbage collection: (1992.940401949, 0.0, 0.0)
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=168000000 last_clock=19344129527 clock_est=(1992.401 19284505254 168000572.826) min_half_rtt=0.000180 min_rtt_time=1992.594 time_avg=1992.401(0.018) clock_avg=19284505254.973(3072766.753) pred_variance=20804776831.928
Dumping serial stats: bytes_write=1098 bytes_read=4651 bytes_retransmit=9 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=9 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 1992.190449 1992.190449 9: seq: 18, identify offset=640 count=40
Sent 1 1992.192504 1992.192504 9: seq: 19, identify offset=680 count=40
Sent 2 1992.194454 1992.194454 9: seq: 1a, identify offset=720 count=40
Sent 3 1992.196503 1992.196503 9: seq: 1b, identify offset=760 count=40
Sent 4 1992.198496 1992.198496 9: seq: 1c, identify offset=800 count=40
Sent 5 1992.200502 1992.200502 9: seq: 1d, identify offset=840 count=40
Sent 6 1992.202441 1992.202441 9: seq: 1e, identify offset=880 count=40
Sent 7 1992.204502 1992.204502 9: seq: 1f, identify offset=920 count=40
Sent 8 1992.206436 1992.206436 9: seq: 10, identify offset=960 count=40
Sent 9 1992.208501 1992.208501 9: seq: 11, identify offset=1000 count=40
Sent 10 1992.210455 1992.210455 9: seq: 12, identify offset=1040 count=40
Sent 11 1992.212496 1992.212496 9: seq: 13, identify offset=1080 count=40
Sent 12 1992.214449 1992.214449 9: seq: 14, identify offset=1120 count=40
Sent 13 1992.216504 1992.216504 9: seq: 15, identify offset=1160 count=40
Sent 14 1992.218463 1992.218463 9: seq: 16, identify offset=1200 count=40
Sent 15 1992.220525 1992.220525 9: seq: 17, identify offset=1240 count=40
Sent 16 1992.222477 1992.222477 9: seq: 18, identify offset=1280 count=40
Sent 17 1992.224510 1992.224510 9: seq: 19, identify offset=1320 count=40
Sent 18 1992.226453 1992.226453 9: seq: 1a, identify offset=1360 count=40
Sent 19 1992.228509 1992.228509 9: seq: 1b, identify offset=1400 count=40
Sent 20 1992.230497 1992.230497 9: seq: 1c, identify offset=1440 count=40
Sent 21 1992.232507 1992.232507 9: seq: 1d, identify offset=1480 count=40
Sent 22 1992.234447 1992.234447 9: seq: 1e, identify offset=1520 count=40
Sent 23 1992.236512 1992.236512 9: seq: 1f, identify offset=1560 count=40
Sent 24 1992.238457 1992.238457 9: seq: 10, identify offset=1600 count=40
Sent 25 1992.240510 1992.240510 9: seq: 11, identify offset=1640 count=40
Sent 26 1992.242445 1992.242445 9: seq: 12, identify offset=1680 count=40
Sent 27 1992.244506 1992.244506 9: seq: 13, identify offset=1720 count=40
Sent 28 1992.246450 1992.246450 9: seq: 14, identify offset=1760 count=40
Sent 29 1992.248583 1992.248583 9: seq: 15, identify offset=1800 count=40
Sent 30 1992.250446 1992.250446 9: seq: 16, identify offset=1840 count=40
Sent 31 1992.252506 1992.252506 9: seq: 17, identify offset=1880 count=40
Sent 32 1992.254451 1992.254451 9: seq: 18, identify offset=1920 count=40
Sent 33 1992.256502 1992.256502 9: seq: 19, identify offset=1960 count=40
Sent 34 1992.258449 1992.258449 9: seq: 1a, identify offset=2000 count=40
Sent 35 1992.260518 1992.260518 9: seq: 1b, identify offset=2040 count=40
Sent 36 1992.262493 1992.262493 9: seq: 1c, identify offset=2080 count=40
Sent 37 1992.264517 1992.264517 9: seq: 1d, identify offset=2120 count=40
Sent 38 1992.266443 1992.266443 9: seq: 1e, identify offset=2160 count=40
Sent 39 1992.268507 1992.268507 9: seq: 1f, identify offset=2200 count=40
Sent 40 1992.270456 1992.270456 9: seq: 10, identify offset=2240 count=40
Sent 41 1992.272505 1992.272505 9: seq: 11, identify offset=2280 count=40
Sent 42 1992.274456 1992.274456 9: seq: 12, identify offset=2320 count=40
Sent 43 1992.276596 1992.276596 9: seq: 13, identify offset=2360 count=40
Sent 44 1992.278468 1992.278468 9: seq: 14, identify offset=2400 count=40
Sent 45 1992.280507 1992.280507 9: seq: 15, identify offset=2440 count=40
Sent 46 1992.282450 1992.282450 9: seq: 16, identify offset=2480 count=40
Sent 47 1992.284522 1992.284522 9: seq: 17, identify offset=2520 count=40
Sent 48 1992.286714 1992.286714 9: seq: 18, identify offset=2560 count=40
Sent 49 1992.289115 1992.289115 9: seq: 19, identify offset=2600 count=40
Sent 50 1992.290560 1992.290560 9: seq: 1a, identify offset=2640 count=40
Sent 51 1992.292479 1992.292479 9: seq: 1b, identify offset=2680 count=40
Sent 52 1992.294491 1992.294491 9: seq: 1c, identify offset=2720 count=40
Sent 53 1992.296464 1992.296464 9: seq: 1d, identify offset=2760 count=40
Sent 54 1992.298408 1992.298408 9: seq: 1e, identify offset=2800 count=40
Sent 55 1992.300457 1992.300457 9: seq: 1f, identify offset=2840 count=40
Sent 56 1992.302404 1992.302404 9: seq: 10, identify offset=2880 count=40
Sent 57 1992.304471 1992.304471 9: seq: 11, identify offset=2920 count=40
Sent 58 1992.306408 1992.306408 9: seq: 12, identify offset=2960 count=40
Sent 59 1992.308469 1992.308469 9: seq: 13, identify offset=3000 count=40
Sent 60 1992.310396 1992.310396 9: seq: 14, identify offset=3012 count=40
Sent 61 1992.329661 1992.329661 6: seq: 15, get_uptime
Sent 62 1992.383340 1992.383340 6: seq: 16, get_clock
Sent 63 1992.436519 1992.436519 6: seq: 17, get_clock
Sent 64 1992.488817 1992.488817 6: seq: 18, get_clock
Sent 65 1992.540834 1992.540834 6: seq: 19, get_clock
Sent 66 1992.594061 1992.594061 6: seq: 1a, get_clock
Sent 67 1992.645761 1992.645761 6: seq: 1b, get_clock
Sent 68 1992.697772 1992.697772 6: seq: 1c, get_clock
Sent 69 1992.749764 1992.749764 6: seq: 1d, get_clock
Sent 70 1992.755419 1992.755419 6: seq: 1e, get_clock
Sent 71 1993.357971 1993.357971 12: seq: 1f, debug_read order=1 addr=536836652
Sent 72 1993.359737 1993.359737 12: seq: 10, debug_read order=1 addr=536836654
Sent 73 1993.362907 1993.362907 6: seq: 11, get_config
Sent 74 1993.371433 1993.371433 8: seq: 12, reset_step_clock oid=5 clock=0
Sent 75 1993.371514 1993.371514 8: seq: 13, update_digital_out oid=21 value=1
Sent 76 1993.371701 1993.371701 14: seq: 14, endstop_home oid=6 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0
Sent 77 1993.371805 1993.371805 10: seq: 15, trsync_start oid=7 report_clock=0 report_ticks=0 expire_reason=0
Sent 78 1993.371896 1993.371896 8: seq: 16, reset_step_clock oid=8 clock=0
Sent 79 1993.372032 1993.372032 8: seq: 17, update_digital_out oid=22 value=1
Sent 80 1993.372218 1993.372218 14: seq: 18, endstop_home oid=9 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0
Sent 81 1993.372332 1993.372332 10: seq: 19, trsync_start oid=10 report_clock=0 report_ticks=0 expire_reason=0
Sent 82 1993.372685 1993.372685 8: seq: 1a, reset_step_clock oid=11 clock=0
Sent 83 1993.372870 1993.372870 8: seq: 1b, update_digital_out oid=23 value=1
Sent 84 1993.373043 1993.373043 14: seq: 1c, endstop_home oid=12 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0
Sent 85 1993.373158 1993.373158 10: seq: 1d, trsync_start oid=13 report_clock=0 report_ticks=0 expire_reason=0
Sent 86 1993.373231 1993.373231 8: seq: 1e, reset_step_clock oid=14 clock=0
Sent 87 1993.373330 1993.373330 8: seq: 1f, update_digital_out oid=26 value=1
Sent 88 1993.373763 1993.373763 26: seq: 10, query_analog_in oid=15 clock=2501330816 sample_ticks=168000 sample_count=8 rest_ticks=50400000 min_value=12005 max_value=32303 range_check_count=4
Sent 89 1993.373893 1993.373893 13: seq: 11, queue_digital_out oid=16 clock=2300232892 on_ticks=0
Sent 90 1993.374002 1993.374002 13: seq: 12, queue_digital_out oid=17 clock=2300264225 on_ticks=0
Sent 91 1993.374111 1993.374111 13: seq: 13, queue_digital_out oid=18 clock=2300284707 on_ticks=0
Sent 92 1993.374298 1993.374298 10: seq: 14, buttons_add oid=19 pos=0 pin=PB2 pull_up=1
Sent 93 1993.374670 1993.374670 10: seq: 15, buttons_add oid=19 pos=1 pin=PE7 pull_up=1
Sent 94 1993.374812 1993.374812 10: seq: 16, buttons_add oid=19 pos=2 pin=PE9 pull_up=1
Sent 95 1993.374967 1993.374967 17: seq: 17, buttons_query oid=19 clock=2508050816 rest_ticks=336000 retransmit_count=50 invert=4
Sent 96 1993.375165 1993.375165 25: seq: 18, query_analog_in oid=20 clock=2509730816 sample_ticks=168000 sample_count=8 rest_ticks=50400000 min_value=6968 max_value=9449 range_check_count=4
Sent 97 1993.375517 1993.375517 26: seq: 19, query_analog_in oid=24 clock=2516450816 sample_ticks=168000 sample_count=8 rest_ticks=50400000 min_value=1503 max_value=32303 range_check_count=4
Sent 98 1993.375705 1993.375705 13: seq: 1a, queue_digital_out oid=25 clock=2300998324 on_ticks=0
Sent 99 1993.410879 1993.410879 6: seq: 1b, emergency_stop
Dumping receive queue 100 messages
Receive: 0 1992.167455 1992.166494 49: seq: 1d, identify_response offset=160 data=b'\xf8m0\xff\xf6!\xfcF\xf0xr6I\xab\xa2H\xca\x0c\xf6\xff}\x92\xe4y\x95&\xad\x8c+\x95i\x91V]\xd9~\xf7U:\xb9'
Receive: 1 1992.169455 1992.168508 49: seq: 1e, identify_response offset=200 data=b"X\x9f\xc1a\xdb\x16N\x19'\xe9g\x01T\x98\xf6\xe8\xab\xd0c\xc82\xcbPW\x9a\xfe\xa8\xf2\xbb\xaf:Qwy\x1ew5\x0b\xcc{"
Receive: 2 1992.171450 1992.170443 49: seq: 1f, identify_response offset=240 data=b'\x81\xdf:\xd9\xbc\xb85\xe1\x00\x9f\x91\xbb\x91\xba\x8d[\x95~\xd6<j\xe1\x8a\xbaPmlw\x15\xaa\x04\xd5\x99\xfd#\xb8\x07\xa8\xa4\x89'
Receive: 3 1992.173455 1992.172507 49: seq: 10, identify_response offset=280 data=b'\xf5\xa1k\xb3\xea\xa9\x9c\\\x84x\xb5r\xa7\xf6p\xa2\xe7<\x9a/\xec\x16\xbaV1\x7fN.\x16\x9b\x9e\xabL\xf2j\x1f\xab\xd2\x9d\x9e'
Receive: 4 1992.175452 1992.174569 49: seq: 11, identify_response offset=320 data=b'\x8e=\xb9\x88\xfa\x95\xcc\x91-\x07\x0fcO\x0f\x0b\xc7J\x93\xb2\x19.6\xd0\xc1\xba_7S{\xd5&y\\u\xedH\xe01\xc9;'
Receive: 5 1992.177455 1992.176501 49: seq: 12, identify_response offset=360 data=b'\x89\xe3L\xee\x92.oc7Q$\xcfq\xd65I\x0b\x06\xa7s\x06+\xb7\x9e\x04{\xb6U=X+\x1dl\x1e.\x1d\xf3!\x9b\xcf'
Receive: 6 1992.179452 1992.178450 49: seq: 13, identify_response offset=400 data=b'W\xeb\x99entl\xf6\x96\xf6#\x9b\xbb\xaf\x85\xfbZ\xba\xaf\x95\xfb\x92y\xf2\xe2\x8c\x06\xea\x08\xdc&*L\xed\x06\xf0\t\x8ad\xb3'
Receive: 7 1992.181455 1992.180490 49: seq: 14, identify_response offset=440 data=b'\x82\xaf\xe1_\xf0\x19\xb07\x0b-z\xb5\x14u\xb7\t\x173_\xd0\x1an\xd9k\xba\x94U\xad\x9ee>\xd2\\\x96\xb4I\xac\xd5\x7f`'
Receive: 8 1992.183454 1992.182446 49: seq: 15, identify_response offset=480 data=b'\x83C\x07/\xa1\x8dQc\x9eGi\tS\xaa\xf4\xce\xbb\x9e\xb9E\xeb\xa7\xe2\x845\xd2\x17\xf0\xb2~\rc\x8bC7\xb6\x0e\xcc\x1c\x99'
Receive: 9 1992.185459 1992.184503 49: seq: 16, identify_response offset=520 data=b'g\xd1\x9fXg\xaar>\x84\x0e\xcf\xc7\x04\xa6\xf9\xbag\xaa\xd5xw|}\xadz\x94\xf1A\xed\x0f\xa4\x86h\xc0\x0f>\xbc\xcf\xe5\xb1'
Receive: 10 1992.187457 1992.186525 49: seq: 17, identify_response offset=560 data=b"\x9f\x0bG\x8b\xdb\x97Z\xb2\x02\xc3\x81\xa4}7\xa7\x84\r).\xf4\xfe\xbb\xaf\xfe\x06@\x11E\x03\xd9'\xd5\x1e@Wqj\x1f\x06p"
Receive: 11 1992.189457 1992.188515 49: seq: 18, identify_response offset=600 data=b'\xf4\xbe\xa8\xdb\xd5&t6L\x9dw\xe94\xff\xec\xbeU\xe6>_\xca4\x1e:\x92H\x8b,\x1e\xfb\xd6\xd2\xbby+\xeb\xba\x7fj8'
Receive: 12 1992.191452 1992.190449 49: seq: 19, identify_response offset=640 data=b'\x8c\x8d\xcbg\xaa\xb1\x9f\x0c\x17\xc4\xdcsu\xb9\x96\xde\xa2a\x7f\xb1\xf6 \x9b\xa2\x82W\\\x9f\xd4\xa8O\xee\x95:\xef\x1d\xa8-\xd2.'
Receive: 13 1992.193455 1992.192504 49: seq: 1a, identify_response offset=680 data=b"i\x9c\x035\xcf\xf1\x11\x04\x88\xd6M\xa2{\xb6\xaa`'X\xf5\xcak\x1b\xd4G\xafVX?\x93\x0f\x1d8}UO.6v\x04\xab"
Receive: 14 1992.195455 1992.194454 49: seq: 1b, identify_response offset=720 data=b'\xec\xc9\xe1\xd9>\x81ckd\x02h\xdcd\xb2\xc1\xfd\xf0\x991T\x84\x96\xe1\xa9Q\xad<\xe2@\xcffFx\xc1\xb2\x90\xcd^\x96\xe9'
Receive: 15 1992.197488 1992.196503 49: seq: 1c, identify_response offset=760 data=b'K\x8c\x98\x02\x87\x80)\xc6\x97\xf8P\x15\xf2\x08\xb9uR\xd4\xfe+1c\x87\xdbCd\x87\xa3\xf7\x98\xc6\xd7u:n\xd4~/\x1b\xbc'
Receive: 16 1992.199453 1992.198496 49: seq: 1d, identify_response offset=800 data=b'\x84\xc6G\x84\xb0\xb5\xe87\xa7\xb8\x01gJZ\xe9\x14\x14B\\\xd9)@rxP1\xebP\xa4M\xca\x1es6\xd9\xc3\x93\xa7s\xc2'
Receive: 17 1992.201456 1992.200502 49: seq: 1e, identify_response offset=840 data=b's4#\xe2\x01\x9d\xf3\xb0\xab\xd1\n`\xc8\xb3\x89\x81\xc5X\xc3~1x\xa0C}\xfcf=\xaff#64\x81e\xeb\xcd\xb1\x04;'
Receive: 18 1992.203456 1992.202441 49: seq: 1f, identify_response offset=880 data=b'!v\x15U\xa6v/1\xd8\xda\xad\xd5HzR\xc2\x04/8\x01RYln\xc4\xd8\x86C~\x9c\x8bsi\x90e\xc6\x8c\xc6\x96\xe3'
Receive: 19 1992.205456 1992.204502 49: seq: 10, identify_response offset=920 data=b'\xed\x17`C\x95\xc9\xb2\x85\xcdE\xb5\xdb\xc1.\xf4\xa8\\\xd4\x02\xba\xc5P\xba\x86\xd3\xe6j\xedQ\xba:\xeb5\xcd\xa1\xfd\xd0y\xdb\xac'
Receive: 20 1992.207451 1992.206436 49: seq: 11, identify_response offset=960 data=b'\xe0\xb8l\x92Q\xbc=\x1d\xd2\xe1\\\xeb\x91\x00\xd9\xb2\xebAd\xb1r\x0c\xe3\xd8\xfc?:[\xd1;\x9b\x81\xe8~\x04\xf9\xc5\x1e\x04\x0f'
Receive: 21 1992.209457 1992.208501 49: seq: 12, identify_response offset=1000 data=b'2\xfd\xecE\xf4(\xb0g\x18\x05tw\x82\xba\x82\xf7<\xde\xdf\x8b)n\x81Q4{K-\xcb\xf9H`\xac\x96ed\x19\x8e \xff'
Receive: 22 1992.211452 1992.210455 49: seq: 13, identify_response offset=1040 data=b"\x8d\xec\t}\x1a\x10^\xed\xf8NKw\xa4S \xf7\xc6\x1a\x9e\xea\x06\x9a\xe3\x01\x80+\xbc\xb9\xccW\x1c\xbbC'O%7n\x8f\xca"
Receive: 23 1992.213456 1992.212496 49: seq: 14, identify_response offset=1080 data=b'\x0f\xbf\xc1\xc2\x8a\x8c\xa2\xafcw\xd6\x02\xe7\x98[fDr\x97"\xa0\x89\x18\xbc\xac\x83\x1f(\xbd\x80\xbf\n\xe0\x01p\x8f\x02?\xd8%'
Receive: 24 1992.215453 1992.214449 49: seq: 15, identify_response offset=1120 data=b'2\x9f$\xcf\xa80\xde\x0f\x04\xe0ia\xb4\xa6G8x\xde\x80\x02\x04\x98\xcd\xbe+$\xee\x83\xd1{>\xe6\x86Dg\xb7\xeb\x9d\xa6\x7f'
Receive: 25 1992.217460 1992.216504 49: seq: 16, identify_response offset=1160 data=b'}\xf4v1b\x84F\x84a\x86s\xf1\xb7\xf7\x10O\x89b\xfd\xce\x17N\xb0\xc5t\xca\xc5(\x9c\xe3\xf4\n\x98V\x1e\x93\xae\xa5\xcc\xfa'
Receive: 26 1992.219451 1992.218463 49: seq: 17, identify_response offset=1200 data=b'P\x06\x03\xe6Y\x1a\x1e\x82\x8f?\xbect\xc4\xfe\xe6%{p\x98\x83\xcb\xe1\x19|_\x18e\xb8`\xff\xe8\x88\x89<\x81\xb2.w\xa6'
Receive: 27 1992.221461 1992.220525 49: seq: 18, identify_response offset=1240 data=b'A\n\x06BK\x16*\xe5\xb31%\xc4|\x07\x82\xaa\xe1\xb0`\xb6\xb7~\xf5\x07\xe9\x1cx\x17\x1e\xa5O\x9a\xb0\xf6\xf0n\xe8A\xfb\x8c'
Receive: 28 1992.223456 1992.222477 49: seq: 19, identify_response offset=1280 data=b'\xf9<\xd8\xf4\xa8\xd1\xdcR\x87&\x82)\x93\x00CH\x90^"\x0c"\xcb^DW\xbb\xf6)i\xa4/[(]\xd9\xa4\xa1\xa8\xb4:'
Receive: 29 1992.225453 1992.224510 49: seq: 1a, identify_response offset=1320 data=b'\x95M\x1d-\xba0\x8b\xbe}\x8f\x08\xbd\x89\x12\xb5/\xc5\xbb\xe5j\xc8\xf5F\xb8\xc3\xdd8%\x8b1\xa6B\xa8P\x98\x05;\x00\x0b6'
Receive: 30 1992.227457 1992.226453 49: seq: 1b, identify_response offset=1360 data=b'=\x03ErD\x01\x8e\xf5\xc2\x85~/\x11\x00\t\x08\x15&\xa1\x1a\xa8\x9a|\xd0\x05D\x8eY\xb0\xbb\x91F\x1d"\xf4\x9d@\x12p\x89'
Receive: 31 1992.229486 1992.228509 49: seq: 1c, identify_response offset=1400 data=b'u\xcf\xd7\xfa\x89\x9a\xac\xab\xc6d\t\x8c\x824vN"\x9fk\x05&\xf1s\x92\x8d[it\x0b\x9f\tT\xc7\x11\xf4\x14\x1ezo`'
Receive: 32 1992.231455 1992.230497 49: seq: 1d, identify_response offset=1440 data=b'\xfej\x93?,\xc8/\xdfm\xe3\x9b\xcb\x7fcf\xb9\x01\x13]}\xba\x8bo?\xfcx\x87\xe5T0\xb9\x98\xdc^-\xcfn\xafV\x93'
Receive: 33 1992.233457 1992.232507 49: seq: 1e, identify_response offset=1480 data=b'\x11%!\xd2\x1aH\x9b\x11)$\n\xe4\x87\xf0\x7f\xc1\x98Fb\xef\xe7g\xb7\xef\x17#R\x84\x94KXp;^0b\xa1\x15\x08\xad'
Receive: 34 1992.235455 1992.234447 49: seq: 1f, identify_response offset=1520 data=b'}\x12B\x04R\xb6\x90j\xde\xbe\x83\x7f[\x92\x86\x7f\xb8\xf9v\xb89\xf8&\xdd\xe6\x12ns\tK].\xc6T\xbe\x11\x1c\xedj\x01'
Receive: 35 1992.237455 1992.236512 49: seq: 10, identify_response offset=1560 data=b'\xff\xa2\x11\xd9\xdc\n\xc9\x01\xd2\x83#\x06\x92\xdf\xe21"\xa4\xcf\xc6\xf4\x07\xa4\x7f\x00\xfa\x07\xa0\x7f\x18\x1f.\xfa\xe2\xee\xac\x02\xb8\xd2\x19'
Receive: 36 1992.239459 1992.238457 49: seq: 11, identify_response offset=1600 data=b"\xdfvK\xcbo\xff\xf1\xd3\xf6\xef\xf1\xf7\x1f\xaf\x7fF\x8cZ\xcf\xe8\x7fg\x93\x9b\xed'\xe0\xd6m\x11\x85\xbb\xf9l\xf5\xfc\x0c\xac\xb7\xff"
Receive: 37 1992.241456 1992.240510 49: seq: 12, identify_response offset=1640 data=b'\xbaa#\x87X#~\xbc\xbe\xbb\xfe\xf8\xcfk^\xfe\xd3\xdd\x15)\x06\x17\xbf\x0c\xb0]3 \xa7\xcd\x0b8oN&\x00\xb5\xbe\xc7\x83'
Receive: 38 1992.243452 1992.242445 49: seq: 13, identify_response offset=1680 data=b'\xdf\xdd_\xde\xdf\xc5w\x9fn\xee~\x8e\xaf.\xef\xaeq\xd9%N_\xdf\xde^\x7f\x8c\xaf~\xba\x7f\x1f_\xbf\xfb\x01\xe6\x83WL\xa6'
Receive: 39 1992.245452 1992.244506 49: seq: 14, identify_response offset=1720 data=b"\x01\xda\xb9J\xa5\x0e\x90)\xce\xcd'X\x85sK4@@_!uV\x8c\xbb\xcc\xe9+\xa2\x9a\xc08\xc3\x02\x16\x05\x1c\xb2\xce{\x7f"
Receive: 40 1992.247454 1992.246450 49: seq: 15, identify_response offset=1760 data=b'}\x03\xbb^\xde\x7f\xfaH\x07\x01\x81\xdb\xcb\xd9\xe4\xe2\x97\xd9Y\xb0\xfc\x15\x06W8\x00\x0c\xe7\xd1\x16GQhF\xefp\x04\x151\x8f'
Receive: 41 1992.249456 1992.248583 49: seq: 16, identify_response offset=1800 data=b'\xaeq\x04\xc9\x11\x8f\xbe\xc7\xd1\xda\xae\xf2\x03\x8e6v\x95\xf7\xb4f`\x97\xf9@\xc3\x90\xd6y5\xc1\xcb\\\x91\xbdt\xf6:\x00{('
Receive: 42 1992.251451 1992.250446 49: seq: 17, identify_response offset=1840 data=b'\xe6\xa8\x17\x16DQD\xf7O\xf4b6_e\xa4\x816\x97\x8bY\x80\xfe\x12\x1a)\xbb\x14\xf9p@s\xa8\xad\x90\xbeBZ\xc0x '
Receive: 43 1992.253454 1992.252506 49: seq: 18, identify_response offset=1880 data=b'\xc7\x14\x94e<\x8eH\x81\xc6\x83Po\x98\xe8)\xc4\xa3\x06\xea\xb9XeF\x89\x82\x90b\xc7\x19*\xb7n.s\x04\xbc\x17ak\x9d'
Receive: 44 1992.255450 1992.254451 49: seq: 19, identify_response offset=1920 data=b'\x8c\xa3\xe76)EY\xb5\x02\x90O`\xf4\x10\x10\xf08\xca\t\x020\xf1tP\xf0\xcd@\xa4E\rP\n;q\x9a\x03\xb2\x7fm1'
Receive: 45 1992.257456 1992.256502 49: seq: 1a, identify_response offset=1960 data=b'U\x82j|\x0f\xabB\x89\x9b\xb4Bi\x91\x98\xbd\xb8\xf7\xc05\x98a\xd6\xc8\x8a \xc6\x95"\xcfRVE9\'l\'Ka\xcbs'
Receive: 46 1992.259451 1992.258449 49: seq: 1b, identify_response offset=2000 data=b"'\x0f\xaa\xd9\x9aD\xa7N\x1a\r$\xd94UCE\x98%4\x12\x92;\xddR\xeb\xf1\xfb\x04\x0e\x9d\x89\xb6\x12\x84\xfd\xd8J\xc2:\x95"
Receive: 47 1992.261485 1992.260518 49: seq: 1c, identify_response offset=2040 data=b's\xa0\x0f\x9cy\nxD"=$e)s\xae\x88,\xc1\xf6\xec\xfa\x16"g\x86\x1c\xf4,\x97\xc9\xbc\xa8.\xec\xe7\x80\r\x8f\x98\x14'
Receive: 48 1992.263453 1992.262493 49: seq: 1d, identify_response offset=2080 data=b'\x12\xd2Jn\x0fXbQ=J{J\x81\xfd\x1b\xc4\xee\x9e\xec\x9aR\xae\r\xc5\xdd\x81#\xba)\xab\xdc\xfe\x987[&P\xac`w'
Receive: 49 1992.265455 1992.264517 49: seq: 1e, identify_response offset=2120 data=b"\xc4\x82\xdd\xceR\xf7\x88\xbcn\xee\xf1b\xbb\x88'\xd7\xc3I\x1bL0\x02y\xf3\xa6pH\x0f\xaa6{D\xde\xf1\x07\x85\x81\xc7\x83\xb1"
Receive: 50 1992.267458 1992.266443 49: seq: 1f, identify_response offset=2160 data=b'\xee&yFo\\[\xcdr\xb7\xe7Fj\x9d\xec\xa5\x90e\n\xe9\x87\xb5(\xb8\xea\x8d\xd2\x1a\xac\xa7\xa1\xb2\xca\xba\x1c\x1b\x15 \x8c\xd9'
Receive: 51 1992.269455 1992.268507 49: seq: 10, identify_response offset=2200 data=b'\x9a0\x81\x90\xdc[>J4\t&jo\x0b\x1c\x92&#\x976\xdc\xd8\x99\xbdA;P! \xe0\xab\xd9\xe5\xd5\x13W\x12?\xc2;'
Receive: 52 1992.271451 1992.270456 49: seq: 11, identify_response offset=2240 data=b'H\x04_\x07\x1f\x11\x81\x12f\xe8>\x01\xbd\x86\x08\xd8u\xf4\t\xaa\xac9O\xe4\xdc\x95H%\x9e\xb4\x9f\x0e\t\xb9\xdd\xf3\xa8\x9bj\x0f'
Receive: 53 1992.273455 1992.272505 49: seq: 12, identify_response offset=2280 data=b'\x9eR\xc0\xd1\x13\xbc\x1b\xa6\xc4pJ\xce\xb4\xb9\n\xff(\xcd\xa5\xd0\x9b\xe1}4\xb0\r\xaa\x1a|\x0c]\x1dS\xeb;\xc7p\xa4\x1d\xf1'
Receive: 54 1992.275456 1992.274456 49: seq: 13, identify_response offset=2320 data=b'\xa4\xf2\x1c\xf2\x8f\x14\xd3x\xbf\xbd\xc8\x19U/\xe94\xf4\x05\t\xack\xef\xe0\x99\xb2\r\xe9\x00\xc8\xa1\x8a\xae\xb0s\xf6\x95`\xf0\xb0\xdd'
Receive: 55 1992.277450 1992.276596 49: seq: 14, identify_response offset=2360 data=b'A\xeaS\xc0b\xf4\xb0\ti\xfc~\xfb\x9dy\xe9mU\x89]B\xb7\xe3\x9ba[\xe6\xdew)T\x190R\xd3\x94s\xb1{\xd2\x07'
Receive: 56 1992.279453 1992.278468 49: seq: 15, identify_response offset=2400 data=b'JB\xea\xa5%\xa1\xe5\xa7Rw5\xa6_\x92_=\xfb78\x1b\xfdN\x01\xb5zW~\x865\x10\x1d\xb8\xfd\xed\xcd\xeb\x9e\x00\x17`'
Receive: 57 1992.281457 1992.280507 49: seq: 16, identify_response offset=2440 data=b'g\x07\xf8\xd0UC\xaf\x16r8-R\xcd\xa6\xf4\xfa\x99\x0c^U\x99\x03\xde=\xc2\x02\xc9Cna\xcc\xdd\x94\xfb2\xc2\xa4\x96\\A'
Receive: 58 1992.283452 1992.282450 49: seq: 17, identify_response offset=2480 data=b"\x8d\xfa;\x17\xe2'\x00R\x88\xad\x0f\x98\r\xee\xb0\xbf\xa7\xff\xc2\xfd;\xfai\xc5a\xaa\xf9\xc1%\xe3\xa6\x9d\xc6.\r \x98\xf1\x8e\x14"
Receive: 59 1992.285554 1992.284522 49: seq: 18, identify_response offset=2520 data=b'\xc8H\x9a\xbb\xec\x97\xe0\x84\xb4\x94CU&\xb9\x01|"\xafD\xd3\xb0#cs\xd6@/?\x13\xcc\xa6!\xd6\x1c501\xd8@\x16'
Receive: 60 1992.287465 1992.286714 49: seq: 19, identify_response offset=2560 data=b'\x12\x05\xeb\xc5\x82\xa2\x96\x19,)\xaa\xf1`\xb9 ;\xc3`\xb9\\\xc1w\xf4\xfaJUt\r0 \xf9\x17$\xd3\xca\xf1K\x03\x8d('
Receive: 61 1992.289443 1992.289115 49: seq: 1a, identify_response offset=2600 data=b'Y\xa6r\xd40\x9a"\x9c\x9el\xfd\xf4\x05\xbfiS\xd8\xe4\x9b\x8b<\x7f9.=%I\xed\xd4\xae\xc2\xbf\xb9\xf2~\'\xc2jn\x8a'
Receive: 62 1992.291418 1992.290560 49: seq: 1b, identify_response offset=2640 data=b'\xfe\xe7zH\x83\x96!/y\xaa\xc10\x8d\xbc\x1f\xb5\x06"\x89\xd7!\x12D1\x17\xa2_`\xa8\x91\xd0\xd7\x19k\xf7\x0b\x13\xc4R\xd3'
Receive: 63 1992.293474 1992.292479 49: seq: 1c, identify_response offset=2680 data=b'n\xa4+RW\x12\xe7\xaccQy\x07\x18\xe6\x9f|C\rej<}\xe9\xd8F\xc2|\xc4\xfd\xeeS\x8cI\xb6\x15\xac\xe1\xb1\xb9\xce'
Receive: 64 1992.295416 1992.294491 49: seq: 1d, identify_response offset=2720 data=b'\xee&\xec;\xa9\x83\x95\x0fU\x01\x98{\xbc\x87\xdf\xa8\x05\xf1y\xdf\x9c\x8c\xad\x07\xf4u\x0f\x8f\xad\x9d\x17}\x03\xd2\xe3\x1d\xb5\t\xce\x91'
Receive: 65 1992.297417 1992.296464 49: seq: 1e, identify_response offset=2760 data=b'\x17\xb3\xcd^#b\x9c\x10\xb1R\xd6\xb0\x9e\xed\x8d\xfd\x19?\xc3\xea\xf1d/\xed\xff\xf2\xb3\xee\x84\x9f!\x0e\xbb\x86\xa9Q\xb8=\\\x97'
Receive: 66 1992.299415 1992.298408 49: seq: 1f, identify_response offset=2800 data=b"\xa6\xf4\x13W\x8a|p\x03\xd0\x82\xdf\xb3\xdf\x04o\xf4\x8e\x8e\xb4\xeb\xbf\xa0\xcd\x91\xd0\x98\x9b\x02\xb1)F\xb9\xe13\rW'zN_"
Receive: 67 1992.301418 1992.300457 49: seq: 10, identify_response offset=2840 data=b'\x12\x1cZ\xf3\xb8_\xf4\xb6\xac)\xd0iW\xb0\x82\xee\xe3\x88\xed\xdf\x9e\xb6\xf0\xd2\xcf\xc8\xff\x14\x96\xcc|\t\xafE\xe0\x0b _p\xaa'
Receive: 68 1992.303416 1992.302404 49: seq: 11, identify_response offset=2880 data=b'\xb1st\x01\xbf\t:\xb8|8\xec\xa4\xfc\x91\xebc\x98\xa5\xf6\x02\xa5\xd9\xeb9\xe7\xf8\xba\x7f\xb0\xba+\xcc\x1f\xfd\x1b\xe3\xc5\xaao\x8e'
Receive: 69 1992.305420 1992.304471 49: seq: 12, identify_response offset=2920 data=b"\x8c:'\xdctW\xe0+\xd1\x08\xbf\x87\xaev\x12\xd2:\x0e\xb6\xec\x7f\x18\x87l?\xe5\xf8\x06\xe8'\xfcp\x96~\x8f\xa4\x87\x884q"
Receive: 70 1992.307415 1992.306408 49: seq: 13, identify_response offset=2960 data=b'\r\x9b\x93\xbf\xd3x\xf0\x87]\x0b\xfeQE\xf0\x8f\x96\x9d\x8f\x8d\x18\x88\xcc\x7f\xff\x005\xec\xe3\xec<\x08\xceg\xd3 \x0c\xa7{\xb9\x94'
Receive: 71 1992.309417 1992.308469 21: seq: 14, identify_response offset=3000 data=b"\xbb\xf9:\xcd&\xaf\xff\x05'\xf9\xf4\x16"
Receive: 72 1992.311412 1992.310396 9: seq: 15, identify_response offset=3012 data=b''
Receive: 73 1992.330462 1992.329661 12: seq: 16, uptime high=4 clock=2092732826
Receive: 74 1992.369436 1992.329661 15: seq: 16, analog_in_state oid=15 next_clock=2148530816 value=31452
Receive: 75 1992.384427 1992.383340 11: seq: 17, clock clock=2101751728
Receive: 76 1992.419454 1992.383340 14: seq: 17, analog_in_state oid=20 next_clock=2156930816 value=7646
Receive: 77 1992.437419 1992.436519 11: seq: 18, clock clock=2110684162
Receive: 78 1992.459437 1992.436519 15: seq: 18, analog_in_state oid=24 next_clock=2163650816 value=31451
Receive: 79 1992.489421 1992.488817 11: seq: 19, clock clock=2119471626
Receive: 80 1992.541464 1992.540834 11: seq: 1a, clock clock=2128210584
Receive: 81 1992.594421 1992.594061 11: seq: 1b, clock clock=2137158390
Receive: 82 1992.646420 1992.645761 11: seq: 1c, clock clock=2145835677
Receive: 83 1992.669431 1992.645761 15: seq: 1c, analog_in_state oid=15 next_clock=2198930816 value=31449
Receive: 84 1992.698417 1992.697772 11: seq: 1d, clock clock=2154573893
Receive: 85 1992.719433 1992.697772 14: seq: 1d, analog_in_state oid=20 next_clock=2207330816 value=7647
Receive: 86 1992.750420 1992.749764 11: seq: 1e, clock clock=2163309784
Receive: 87 1992.756518 1992.755419 11: seq: 1f, clock clock=2164260343
Receive: 88 1992.759457 1992.755419 15: seq: 1f, analog_in_state oid=24 next_clock=2214050816 value=31452
Receive: 89 1992.969442 1992.755419 15: seq: 1f, analog_in_state oid=15 next_clock=2249330816 value=31452
Receive: 90 1993.019502 1992.755419 14: seq: 1f, analog_in_state oid=20 next_clock=2257730816 value=7646
Receive: 91 1993.059464 1992.755419 15: seq: 1f, analog_in_state oid=24 next_clock=2264450816 value=31452
Receive: 92 1993.212465 1992.755419 15: seq: 1f, stats count=326 sum=435765 sumsq=3408459
Receive: 93 1993.269444 1992.755419 15: seq: 1f, analog_in_state oid=15 next_clock=2299730816 value=31450
Receive: 94 1993.319451 1992.755419 14: seq: 1f, analog_in_state oid=20 next_clock=2308130816 value=7649
Receive: 95 1993.358428 1993.357971 8: seq: 10, debug_result val=964
Receive: 96 1993.359402 1993.357971 15: seq: 10, analog_in_state oid=24 next_clock=2314850816 value=31453
Receive: 97 1993.360442 1993.359737 8: seq: 11, debug_result val=1212
Receive: 98 1993.363424 1993.362907 15: seq: 12, config is_config=1 crc=2148372726 is_shutdown=0 move_count=1024
Receive: 99 1993.411484 1993.410879 12: seq: 1c, shutdown clock=2274375650 static_string_id=Command request
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472795305968: Disconnected
Restarting printer
Start printer at Fri May 19 14:51:14 2023 (1684507874.2 2069.6)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu Host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = Host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472769574896: New connection
webhooks client 281472769574896: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'Host': Starting connect
Loaded MCU 'Host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'Host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'Host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'Host'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'Host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472769574896: Disconnected
Restarting printer
Start printer at Fri May 19 14:51:52 2023 (1684507912.7 2108.1)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu mcu_host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = mcu_host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472796514144: New connection
webhooks client 281472796514144: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'mcu_host': Starting connect
Loaded MCU 'mcu_host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'mcu_host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'mcu_host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu_host'
Attempting MCU 'mcu' reset command
Attempting MCU 'mcu_host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472796514144: Disconnected
Restarting printer
Start printer at Fri May 19 14:52:18 2023 (1684507938.5 2133.9)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472769563856: New connection
webhooks client 281472769563856: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472769563856: Disconnected
Restarting printer
Start printer at Fri May 19 14:53:08 2023 (1684507988.2 2183.6)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472769420640: New connection
webhooks client 281472769420640: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting serial connect
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' reset
Unhandled exception during post run
Traceback (most recent call last):
  File "/home/biqu/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 265, in open
    self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
FileNotFoundError: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 234, in run
    self.send_event("klippy:firmware_restart")
  File "/home/biqu/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/biqu/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/biqu/klipper/klippy/mcu.py", line 949, in _firmware_restart
    self._restart_arduino()
  File "/home/biqu/klipper/klippy/mcu.py", line 909, in _restart_arduino
    serialhdl.arduino_reset(self._serialport, self._reactor)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 379, in arduino_reset
    ser = serial.Serial(serialport, 2400, timeout=0, exclusive=True)
  File "/home/biqu/klippy-env/lib/python3.9/site-packages/serial/serialutil.py", line 240, in __init__
    self.open()
  File "/home/biqu/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 268, in open
    raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
serial.serialutil.SerialException: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00'
Restarting printer
Start printer at Fri May 19 14:53:51 2023 (1684508031.1 2226.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472795161648: New connection
webhooks client 281472795161648: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting serial connect
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
webhooks client 281472795161648: Disconnected
Restarting printer
Start printer at Fri May 19 14:54:02 2023 (1684508042.4 2237.8)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472796164048: New connection
webhooks client 281472796164048: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting serial connect
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
mcu 'host': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 11] Resource temporarily unavailable
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' reset
Unhandled exception during post run
Traceback (most recent call last):
  File "/home/biqu/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 265, in open
    self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
FileNotFoundError: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 234, in run
    self.send_event("klippy:firmware_restart")
  File "/home/biqu/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/biqu/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/biqu/klipper/klippy/mcu.py", line 949, in _firmware_restart
    self._restart_arduino()
  File "/home/biqu/klipper/klippy/mcu.py", line 909, in _restart_arduino
    serialhdl.arduino_reset(self._serialport, self._reactor)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 379, in arduino_reset
    ser = serial.Serial(serialport, 2400, timeout=0, exclusive=True)
  File "/home/biqu/klippy-env/lib/python3.9/site-packages/serial/serialutil.py", line 240, in __init__
    self.open()
  File "/home/biqu/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 268, in open
    raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
serial.serialutil.SerialException: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00'
Restarting printer
Start printer at Fri May 19 14:54:47 2023 (1684508087.9 2283.3)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472769411200: New connection
webhooks client 281472769411200: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472769411200: Disconnected
Restarting printer
Start printer at Fri May 19 14:55:31 2023 (1684508131.0 2326.4)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PB6
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472769411440: New connection
webhooks client 281472769411440: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 2330.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=4895 bytes_read=6123 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=262 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=415 upcoming_bytes=40 freq=167995463 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=798 bytes_read=4406 bytes_retransmit=0 bytes_invalid=0 send_seq=109 receive_seq=109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49995803 adj=49995555 heater_bed: target=0 temp=0.0 pwm=0.000 mcu_temp: temp=0.0  sysload=0.21 cputime=30.674 memavail=702712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281472769411440
webhooks: registering remote method 'reboot_machine' for connection id: 281472769411440
webhooks: registering remote method 'pause_job_queue' for connection id: 281472769411440
webhooks: registering remote method 'start_job_queue' for connection id: 281472769411440
Stats 2331.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=5409 bytes_read=6274 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.004 rttvar=0.004 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167999216 host: mcu_awake=0.004 mcu_task_avg=0.000030 mcu_task_stddev=0.000021 bytes_write=804 bytes_read=4437 bytes_retransmit=0 bytes_invalid=0 send_seq=110 receive_seq=110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000282 adj=49997620 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=0.0  sysload=0.21 cputime=30.742 memavail=701588 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 2332.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=5458 bytes_read=6471 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997883 host: mcu_awake=0.004 mcu_task_avg=0.000030 mcu_task_stddev=0.000021 bytes_write=810 bytes_read=4453 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000364 adj=50002205 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.0  sysload=0.19 cputime=30.784 memavail=701588 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2333.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=5464 bytes_read=6619 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997649 host: mcu_awake=0.004 mcu_task_avg=0.000030 mcu_task_stddev=0.000021 bytes_write=816 bytes_read=4469 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000240 adj=50002650 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.19 cputime=30.816 memavail=701336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2334.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000008 bytes_write=5470 bytes_read=6782 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167998249 host: mcu_awake=0.004 mcu_task_avg=0.000030 mcu_task_stddev=0.000021 bytes_write=822 bytes_read=4485 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000413 adj=50002139 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.1  sysload=0.19 cputime=30.849 memavail=701096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2335.7: gcodein=0  mcu: mcu_awake=0.044 mcu_task_avg=0.000129 mcu_task_stddev=0.000290 bytes_write=5476 bytes_read=6976 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997794 host: mcu_awake=0.004 mcu_task_avg=0.000030 mcu_task_stddev=0.000021 bytes_write=828 bytes_read=4501 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000372 adj=50001803 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.19 cputime=30.882 memavail=701096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2336.7: gcodein=0  mcu: mcu_awake=0.044 mcu_task_avg=0.000129 mcu_task_stddev=0.000290 bytes_write=5482 bytes_read=7124 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997541 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=834 bytes_read=4530 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000342 adj=50001826 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.1  sysload=0.19 cputime=30.915 memavail=701224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2337.7: gcodein=0  mcu: mcu_awake=0.044 mcu_task_avg=0.000129 mcu_task_stddev=0.000290 bytes_write=5488 bytes_read=7287 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997419 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=840 bytes_read=4546 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000343 adj=50001757 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.18 cputime=30.947 memavail=700720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2338.7: gcodein=0  mcu: mcu_awake=0.044 mcu_task_avg=0.000129 mcu_task_stddev=0.000290 bytes_write=5494 bytes_read=7464 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997326 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=846 bytes_read=4562 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000322 adj=50001698 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.18 cputime=30.981 memavail=700220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2339.7: gcodein=0  mcu: mcu_awake=0.044 mcu_task_avg=0.000129 mcu_task_stddev=0.000290 bytes_write=5500 bytes_read=7612 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997476 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=852 bytes_read=4578 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000329 adj=50001576 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.1  sysload=0.18 cputime=31.015 memavail=699968 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2340.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5506 bytes_read=7789 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997394 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=858 bytes_read=4594 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000333 adj=50001330 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.18 cputime=31.048 memavail=699972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2341.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5512 bytes_read=7966 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997316 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=864 bytes_read=4623 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000342 adj=50001373 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.18 cputime=31.081 memavail=699980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2342.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5518 bytes_read=8114 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997278 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=870 bytes_read=4639 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000356 adj=50001431 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.16 cputime=31.114 memavail=699280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2343.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5524 bytes_read=8277 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997254 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=876 bytes_read=4655 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000350 adj=50001460 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.16 cputime=31.147 memavail=699288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2344.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5530 bytes_read=8454 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997218 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=882 bytes_read=4671 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000351 adj=50001392 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=27.3  sysload=0.16 cputime=31.182 memavail=699288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2345.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5536 bytes_read=8616 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997208 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=888 bytes_read=4687 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000357 adj=50001389 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=27.4  sysload=0.16 cputime=31.215 memavail=699300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2346.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5542 bytes_read=8779 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997189 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=894 bytes_read=4716 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000359 adj=50001378 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.16 cputime=31.248 memavail=699300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2347.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5548 bytes_read=8956 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997292 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=900 bytes_read=4732 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000364 adj=50001369 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.15 cputime=31.282 memavail=699300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2348.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5554 bytes_read=9104 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997250 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=906 bytes_read=4748 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000363 adj=50001193 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.15 cputime=31.315 memavail=699300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2349.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5560 bytes_read=9267 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997289 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=912 bytes_read=4764 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000355 adj=50001248 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.15 cputime=31.349 memavail=699048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2350.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5566 bytes_read=9455 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997249 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=918 bytes_read=4780 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000361 adj=50001125 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.15 cputime=31.383 memavail=699048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2351.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5572 bytes_read=9593 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997234 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=924 bytes_read=4809 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000357 adj=50001237 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.15 cputime=31.416 memavail=699048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2352.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5578 bytes_read=9753 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997218 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=930 bytes_read=4825 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000360 adj=50001240 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.4  sysload=0.14 cputime=31.449 memavail=698624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2353.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5584 bytes_read=9930 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997210 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=936 bytes_read=4841 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000369 adj=50001271 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=27.4  sysload=0.14 cputime=31.482 memavail=698856 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2354.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5590 bytes_read=10078 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997193 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=942 bytes_read=4857 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000366 adj=50001320 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.14 cputime=31.514 memavail=698904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2355.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5596 bytes_read=10255 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997181 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=948 bytes_read=4873 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000360 adj=50001308 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.14 cputime=31.551 memavail=698912 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2356.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5602 bytes_read=10432 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997172 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=954 bytes_read=4902 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000356 adj=50001265 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.14 cputime=31.584 memavail=698928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2357.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5608 bytes_read=10580 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997157 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=960 bytes_read=4918 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000353 adj=50001236 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.12 cputime=31.617 memavail=698240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2358.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5614 bytes_read=10757 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997150 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=966 bytes_read=4934 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000357 adj=50001267 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.4  sysload=0.12 cputime=31.650 memavail=698240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2359.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5620 bytes_read=10920 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997139 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=972 bytes_read=4950 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000362 adj=50001296 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.12 cputime=31.682 memavail=698240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2360.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5626 bytes_read=11068 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997132 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=978 bytes_read=4966 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000414 adj=50001328 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.4  sysload=0.12 cputime=31.715 memavail=698248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2361.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5632 bytes_read=11259 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997125 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=984 bytes_read=4995 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000408 adj=50001704 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.12 cputime=31.750 memavail=698528 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2362.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5638 bytes_read=11422 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997117 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=990 bytes_read=5011 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000405 adj=50001565 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.11 cputime=31.783 memavail=698084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2363.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5644 bytes_read=11570 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997116 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=996 bytes_read=5027 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000399 adj=50001204 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.11 cputime=31.816 memavail=697832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 2364.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5650 bytes_read=11747 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997111 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1002 bytes_read=5043 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000392 adj=50001171 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.4  sysload=0.11 cputime=31.849 memavail=697832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2365.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5656 bytes_read=11910 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997108 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1008 bytes_read=5059 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000391 adj=50001165 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.11 cputime=31.882 memavail=698348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2366.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5662 bytes_read=12072 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997110 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1020 bytes_read=5104 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000391 adj=50001188 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.1  sysload=0.11 cputime=31.915 memavail=698560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2367.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5668 bytes_read=12249 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997112 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1026 bytes_read=5120 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000390 adj=50001193 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.11 cputime=31.949 memavail=699144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2368.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5674 bytes_read=12412 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997108 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1032 bytes_read=5136 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000386 adj=50001194 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.11 cputime=31.981 memavail=699144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2369.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5680 bytes_read=12560 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997103 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1038 bytes_read=5152 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000382 adj=50001163 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.2  sysload=0.11 cputime=32.014 memavail=699144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2370.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5686 bytes_read=12737 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997103 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1044 bytes_read=5168 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000382 adj=50001160 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.11 cputime=32.047 memavail=699308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2371.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5692 bytes_read=12914 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997114 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1050 bytes_read=5197 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000381 adj=50001184 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.11 cputime=32.080 memavail=699588 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2372.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5698 bytes_read=13062 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997105 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1056 bytes_read=5213 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000382 adj=50001157 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.10 cputime=32.113 memavail=699368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2373.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5704 bytes_read=13239 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997102 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1062 bytes_read=5229 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000385 adj=50001212 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.3  sysload=0.10 cputime=32.147 memavail=699368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2374.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5710 bytes_read=13402 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997096 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1068 bytes_read=5245 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000382 adj=50001260 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.4  sysload=0.10 cputime=32.182 memavail=699368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2375.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5716 bytes_read=13550 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997094 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1074 bytes_read=5261 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000382 adj=50001244 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.4  sysload=0.10 cputime=32.215 memavail=699116 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2376.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5722 bytes_read=13733 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997091 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1080 bytes_read=5290 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000390 adj=50001246 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.10 cputime=32.249 memavail=698900 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2377.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5728 bytes_read=13888 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997111 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1086 bytes_read=5306 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000387 adj=50001335 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.09 cputime=32.282 memavail=698228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2378.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5734 bytes_read=14036 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997110 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1092 bytes_read=5322 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000386 adj=50001226 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.5  sysload=0.09 cputime=32.314 memavail=698232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2379.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5740 bytes_read=14213 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997147 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1098 bytes_read=5338 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000389 adj=50001222 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=27.5  sysload=0.09 cputime=32.349 memavail=698232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2380.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5746 bytes_read=14376 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997142 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1104 bytes_read=5354 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000384 adj=50001148 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.4  sysload=0.09 cputime=32.381 memavail=698232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2381.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5752 bytes_read=14538 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997139 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1110 bytes_read=5383 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000383 adj=50001135 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.09 cputime=32.415 memavail=698244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2382.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5758 bytes_read=14715 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997136 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1116 bytes_read=5399 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000382 adj=50001157 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.4  sysload=0.08 cputime=32.448 memavail=697780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2383.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5764 bytes_read=14878 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997132 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1122 bytes_read=5415 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000382 adj=50001177 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.3  sysload=0.08 cputime=32.482 memavail=697784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 2384.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=5770 bytes_read=15026 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997126 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1128 bytes_read=5431 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000381 adj=50001203 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.5  sysload=0.08 cputime=32.514 memavail=697532 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 3180.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000026 bytes_write=10670 bytes_read=146396 bytes_retransmit=9 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167997069 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=5976 bytes_read=20365 bytes_retransmit=0 bytes_invalid=0 send_seq=972 receive_seq=972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999735 adj=50000575 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.6  sysload=0.45 cputime=58.132 memavail=700248 print_time=855.275 buffer_time=0.189 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472769411440: Disconnected
Restarting printer
Start printer at Fri May 19 15:09:46 2023 (1684508986.6 3182.0)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00
pin_map = host

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/biqu/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'pin_map' is not valid in section 'mcu'
webhooks client 281472795932800: New connection
webhooks client 281472795932800: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Attempting MCU 'mcu' reset
Unable to issue reset command on MCU 'host'
webhooks client 281472795932800: Disconnected
Restarting printer
Start printer at Fri May 19 15:12:35 2023 (1684509155.9 3351.3)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472796296480: New connection
webhooks client 281472796296480: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472796296480: Disconnected
Restarting printer
Start printer at Fri May 19 15:14:45 2023 (1684509285.2 3480.6)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:gpio19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472769420160: New connection
webhooks client 281472769420160: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
MCU 'host' shutdown: Unable to open out GPIO chip line
clocksync state: mcu_freq=50000000 last_clock=222522804 clock_est=(3484.117 205054187 49996783.235) min_half_rtt=0.000089 min_rtt_time=3484.466 time_avg=3484.117(0.018) clock_avg=205054187.800(892829.529) pred_variance=1842833487.782 clock_adj=(0.363 50002353.250)
Dumping serial stats: bytes_write=832 bytes_read=4449 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 96 messages
Sent 0 3483.851336 3483.851336 8: seq: 10, identify offset=0 count=40
Sent 1 3483.853038 3483.853038 8: seq: 11, identify offset=40 count=40
Sent 2 3483.854204 3483.854204 8: seq: 12, identify offset=80 count=40
Sent 3 3483.855543 3483.855543 9: seq: 13, identify offset=120 count=40
Sent 4 3483.858063 3483.858063 9: seq: 14, identify offset=160 count=40
Sent 5 3483.859471 3483.859471 9: seq: 15, identify offset=200 count=40
Sent 6 3483.860768 3483.860768 9: seq: 16, identify offset=240 count=40
Sent 7 3483.861983 3483.861983 9: seq: 17, identify offset=280 count=40
Sent 8 3483.863221 3483.863221 9: seq: 18, identify offset=320 count=40
Sent 9 3483.864500 3483.864500 9: seq: 19, identify offset=360 count=40
Sent 10 3483.865759 3483.865759 9: seq: 1a, identify offset=400 count=40
Sent 11 3483.866971 3483.866971 9: seq: 1b, identify offset=440 count=40
Sent 12 3483.868241 3483.868241 9: seq: 1c, identify offset=480 count=40
Sent 13 3483.869498 3483.869498 9: seq: 1d, identify offset=520 count=40
Sent 14 3483.870753 3483.870753 9: seq: 1e, identify offset=560 count=40
Sent 15 3483.871967 3483.871967 9: seq: 1f, identify offset=600 count=40
Sent 16 3483.873213 3483.873213 9: seq: 10, identify offset=640 count=40
Sent 17 3483.874357 3483.874357 9: seq: 11, identify offset=680 count=40
Sent 18 3483.875494 3483.875494 9: seq: 12, identify offset=720 count=40
Sent 19 3483.878193 3483.878193 9: seq: 13, identify offset=760 count=40
Sent 20 3483.879629 3483.879629 9: seq: 14, identify offset=800 count=40
Sent 21 3483.881246 3483.881246 9: seq: 15, identify offset=840 count=40
Sent 22 3483.883003 3483.883003 9: seq: 16, identify offset=880 count=40
Sent 23 3483.884542 3483.884542 9: seq: 17, identify offset=920 count=40
Sent 24 3483.885960 3483.885960 9: seq: 18, identify offset=960 count=40
Sent 25 3483.887402 3483.887402 9: seq: 19, identify offset=1000 count=40
Sent 26 3483.888853 3483.888853 9: seq: 1a, identify offset=1040 count=40
Sent 27 3483.890264 3483.890264 9: seq: 1b, identify offset=1080 count=40
Sent 28 3483.891684 3483.891684 9: seq: 1c, identify offset=1120 count=40
Sent 29 3483.893150 3483.893150 9: seq: 1d, identify offset=1160 count=40
Sent 30 3483.894705 3483.894705 9: seq: 1e, identify offset=1200 count=40
Sent 31 3483.896287 3483.896287 9: seq: 1f, identify offset=1240 count=40
Sent 32 3483.897542 3483.897542 9: seq: 10, identify offset=1280 count=40
Sent 33 3483.898796 3483.898796 9: seq: 11, identify offset=1320 count=40
Sent 34 3483.900321 3483.900321 9: seq: 12, identify offset=1360 count=40
Sent 35 3483.901555 3483.901555 9: seq: 13, identify offset=1400 count=40
Sent 36 3483.902766 3483.902766 9: seq: 14, identify offset=1440 count=40
Sent 37 3483.903954 3483.903954 9: seq: 15, identify offset=1480 count=40
Sent 38 3483.905257 3483.905257 9: seq: 16, identify offset=1520 count=40
Sent 39 3483.906447 3483.906447 9: seq: 17, identify offset=1560 count=40
Sent 40 3483.907619 3483.907619 9: seq: 18, identify offset=1600 count=40
Sent 41 3483.908877 3483.908877 9: seq: 19, identify offset=1640 count=40
Sent 42 3483.910074 3483.910074 9: seq: 1a, identify offset=1680 count=40
Sent 43 3483.911259 3483.911259 9: seq: 1b, identify offset=1720 count=40
Sent 44 3483.912520 3483.912520 9: seq: 1c, identify offset=1760 count=40
Sent 45 3483.913733 3483.913733 9: seq: 1d, identify offset=1800 count=40
Sent 46 3483.914931 3483.914931 9: seq: 1e, identify offset=1840 count=40
Sent 47 3483.916329 3483.916329 9: seq: 1f, identify offset=1880 count=40
Sent 48 3483.917570 3483.917570 9: seq: 10, identify offset=1920 count=40
Sent 49 3483.918765 3483.918765 9: seq: 11, identify offset=1960 count=40
Sent 50 3483.919956 3483.919956 9: seq: 12, identify offset=2000 count=40
Sent 51 3483.921223 3483.921223 9: seq: 13, identify offset=2040 count=40
Sent 52 3483.922427 3483.922427 9: seq: 14, identify offset=2080 count=40
Sent 53 3483.923622 3483.923622 9: seq: 15, identify offset=2120 count=40
Sent 54 3483.924878 3483.924878 9: seq: 16, identify offset=2160 count=40
Sent 55 3483.926079 3483.926079 9: seq: 17, identify offset=2200 count=40
Sent 56 3483.927278 3483.927278 9: seq: 18, identify offset=2240 count=40
Sent 57 3483.928547 3483.928547 9: seq: 19, identify offset=2280 count=40
Sent 58 3483.929771 3483.929771 9: seq: 1a, identify offset=2320 count=40
Sent 59 3483.930967 3483.930967 9: seq: 1b, identify offset=2360 count=40
Sent 60 3483.932227 3483.932227 9: seq: 1c, identify offset=2400 count=40
Sent 61 3483.933440 3483.933440 9: seq: 1d, identify offset=2440 count=40
Sent 62 3483.934645 3483.934645 9: seq: 1e, identify offset=2480 count=40
Sent 63 3483.935849 3483.935849 9: seq: 1f, identify offset=2520 count=40
Sent 64 3483.937110 3483.937110 9: seq: 10, identify offset=2560 count=40
Sent 65 3483.938312 3483.938312 9: seq: 11, identify offset=2600 count=40
Sent 66 3483.939510 3483.939510 9: seq: 12, identify offset=2640 count=40
Sent 67 3483.940765 3483.940765 9: seq: 13, identify offset=2680 count=40
Sent 68 3483.941976 3483.941976 9: seq: 14, identify offset=2720 count=40
Sent 69 3483.943308 3483.943308 9: seq: 15, identify offset=2760 count=40
Sent 70 3483.944598 3483.944598 9: seq: 16, identify offset=2800 count=40
Sent 71 3483.945817 3483.945817 9: seq: 17, identify offset=2840 count=40
Sent 72 3483.947030 3483.947030 9: seq: 18, identify offset=2880 count=40
Sent 73 3483.948339 3483.948339 9: seq: 19, identify offset=2920 count=40
Sent 74 3483.949608 3483.949608 9: seq: 1a, identify offset=2960 count=40
Sent 75 3483.950817 3483.950817 9: seq: 1b, identify offset=3000 count=40
Sent 76 3483.952225 3483.952225 9: seq: 1c, identify offset=3040 count=40
Sent 77 3483.953459 3483.953459 9: seq: 1d, identify offset=3080 count=40
Sent 78 3483.954666 3483.954666 9: seq: 1e, identify offset=3096 count=40
Sent 79 3484.046876 3484.046876 6: seq: 1f, get_uptime
Sent 80 3484.100308 3484.100308 6: seq: 10, get_clock
Sent 81 3484.152799 3484.152799 6: seq: 11, get_clock
Sent 82 3484.204378 3484.204378 6: seq: 12, get_clock
Sent 83 3484.255872 3484.255872 6: seq: 13, get_clock
Sent 84 3484.307458 3484.307458 6: seq: 14, get_clock
Sent 85 3484.359060 3484.359060 6: seq: 15, get_clock
Sent 86 3484.411350 3484.411350 6: seq: 16, get_clock
Sent 87 3484.462949 3484.462949 6: seq: 17, get_clock
Sent 88 3484.466310 3484.466310 6: seq: 18, get_clock
Sent 89 3484.485887 3484.485887 6: seq: 19, get_config
Sent 90 3484.488372 3484.488372 7: seq: 1a, allocate_oids count=1
Sent 91 3484.488892 3484.488892 11: seq: 1b, config_digital_out oid=0 pin=gpiochip0/gpio19 value=0 default_value=1 max_duration=0
Sent 92 3484.489270 3484.489270 10: seq: 1c, set_digital_out_pwm_cycle oid=0 cycle_ticks=500000
Sent 93 3484.489534 3484.489534 11: seq: 1d, finalize_config crc=362279710
Sent 94 3484.489675 3484.489675 13: seq: 1e, queue_digital_out oid=0 clock=233561796 on_ticks=0
Sent 95 3484.490024 3484.490024 6: seq: 1f, get_config
Dumping receive queue 92 messages
Receive: 0 3483.849842 0.000000 6: seq: 10, starting
Receive: 1 3483.851578 3483.851336 48: seq: 11, identify_response offset=0 data=b'x\xda\xa5\x1ako\xdc\xb8\xf1\xaf\xb0\x0b\x04\xb9\x14\xb6o\xf5\xdc]\x03\xf9\xe08\xb9C\xd0\xba\xc9\x9d\x13\xb4@q\x10d\x89\xbbKX'
Receive: 2 3483.853234 3483.853038 48: seq: 12, identify_response offset=40 data=b'\xaf\x13%?z\xf0\x7f\xef\x0c\x87/i\xd7N\xda\xf3\x97\xa583\xe4p8o\xfa\x8f\xc5\xcd(\xaa2\xbb\xe3\xbd\x14m#\x17\xe7\x8b'
Receive: 3 3483.854420 3483.854204 48: seq: 13, identify_response offset=80 data=b']Q\x9c\xb3\x1f\xde\xf3\x1b\x917,X\x9e\x85g\xc1i\xfaF\x8fX\xb8\x0c\x83e\x10,\xd9\x8dh\xc6AT\x12p\x7f\xfe\xc7W\xf6'
Receive: 4 3483.855812 3483.855543 49: seq: 14, identify_response offset=120 data=b'N\x7f\xb2m\xdb3"~\xc3\xc2\xb3(9\x0b\x17\'\x8b\xa2\xad\xeb\xbc)a\xf9?\x16yU\xb5E>\xf0\xac\x15\xa5dE;6\xc3'
Receive: 5 3483.858334 3483.858063 49: seq: 15, identify_response offset=160 data=b'\xdbW\xc5\xe2|}\x02\xbc\x0c\x030\x91\xe5\xc5-\x03(L{\xf04\xf6\x10\xca\xd2 t\xadT?\xa2y\xfbjd\xddXU\xd9\xd8'
Receive: 6 3483.859683 3483.859471 49: seq: 16, identify_response offset=200 data=b'\x11A\xea\x08~\x1fy\xffh\xd7\x04\x06n\x11\xbb\xe7r\xc8\x06Q\xdcJ\xfa\x1a\xfa\xbc\x91\xb5\x182\xb3+\x13\rHF\xef\x9f\xc09'
Receive: 7 3483.860975 3483.860768 49: seq: 17, identify_response offset=240 data=b"*\x9e\xf7\x99\xdc\x8fC\xd9\xde7\x8b\xf3\x10\x8f\xd6l\xc5\x0e8z\xa8\xa281[\xc8Nd4\\\x9c'\x81\xc3j\xf2\xaa\xdde\xa2"
Receive: 8 3483.862191 3483.861983 49: seq: 18, identify_response offset=280 data=b'\xb1\xdc+\xb6\x17\xe7\x91[I\xb3l0\xe83\xf3\xe4\xb0\xb2\xa8j\x92\xf7\xd3\xc5&2X\xc5\x16\xb9\x14;1\xe4U\xd6\x8e\xc3\x8c\xe0'
Receive: 9 3483.863424 3483.863221 49: seq: 19, identify_response offset=320 data=b'.\xafF\x8e\xdf%\xdf\xe6c5dv\xa2\xce\x1f\xb2r\xec\xf3\x01tC\xf1\x19\xb8\xcdK\x19\xaco\xc2\xa5=1\xefE^\xbd}\xf5'
Receive: 10 3483.864723 3483.864500 49: seq: 1a, identify_response offset=360 data=b'W\xa9\xa8x\xdf\xb7\xbd\xc7\xf5zi\t9(\xc2\xd0v\x13&\x8a\t\xd7aj\x91\xf7e\x1c\xaf\xd6v\x97^f\x9ain\x06el'
Receive: 11 3483.865960 3483.865759 49: seq: 1b, identify_response offset=400 data=b'G\x89\x1d\xa5v\xb4\xb2#^\xe5\x8f\xf6\xb6A\x8e\x91\xddD\x84\x85\xd9\x00\x86p\x03\xa4\x0f\xa0\xa4\xf8\x0b\xca\x06\x8aBD\xb1\x93g\xdd'
Receive: 12 3483.867174 3483.866971 49: seq: 1c, identify_response offset=440 data=b'\x8d\x9b0Y\xfa\x84\xf6\xc6\x9d\x94\x1a\xdev\xe2\x81W3\x91\x97\xf9\x90gR\xfc\x076\xd8\x8f`KC\x86B\xf3TQr\x98\x12\x8d'
Receive: 13 3483.868450 3483.868241 49: seq: 1d, identify_response offset=480 data=b'\xc7\xef\xca\xa9HW\xe4\x9bt\x9d8\x15Q&\x80|*\xf5\xde\xe7M\xc3+5|\x04\x8du\xcb\xea{\xdd\x8f\xf3\x9b\x86\x99\x83\xab^'
Receive: 14 3483.869691 3483.869498 49: seq: 1e, identify_response offset=520 data=b'\xad\xdd~\xf7\xf5\x11\xb5\xf93\x8b\xc7NB\xea\xac\xb0]bg\xc0x\xe6[\xa1O\x18\xc4\x1d\xcf\xf6b\xb7W2\x8e\xd6>>X\xd6'
Receive: 15 3483.870935 3483.870753 49: seq: 1f, identify_response offset=560 data=b'\xae\xe2\x87\xd6\xc7,,\x1b\x1e;N\xb7\x13O(\x8d5\x1f#\xd6\xa0\xac\x96;\xd4l\xd85\x9a\xd0\xde\x8ba\x0f\x82\xc9\nc\xae\x80'
Receive: 16 3483.872200 3483.871967 49: seq: 10, identify_response offset=600 data=b'\xe1N&\x87\xd5\xc6\x19HaUW\x16\xd5\xad\x1d\x8b\xd2\x0e\x1f\x9b"\x9bj)+\xea2;P\xdc\xa5\xb7\x03\xef:\xe7\x00\xf03\xd3'
Receive: 17 3483.873389 3483.873213 49: seq: 11, identify_response offset=640 data=b'\xf6T\x8a\xde\x0c\xc9\x89)d\x875V\x92{\x8b\x86\xee`\xc3\x9e\xf7u\x0b\xa6\xdb\x1d\x95\xa8\x0fvB\x8d\x1dSC]\x8cyo\xb5'
Receive: 18 3483.874523 3483.874357 49: seq: 12, identify_response offset=680 data=b'\xa5\x7f\xc8\x0e\x1c\x13\x1b\xec$\xea\xfe jNG\xdb\xb8Uz\x94\x87\x13+\xac_\xf2\x9b\x11,\xaa\xed\x16\xe7\x1b\xf3\x05\xab\xec\x945'
Receive: 19 3483.875657 3483.875494 49: seq: 13, identify_response offset=720 data=b'\xd1\xfd\x04\x16\xad\xe79\xc4\x88\xbe\xe4\xbd\xb3\rt`\xa1A\xb8\xef\xc5\xc0\x0f0P\x8d\t\x11\xbc6\xafy\xbf\xe3M\xf1\x98\xa1\xc3\x02'
Receive: 20 3483.878413 3483.878193 49: seq: 14, identify_response offset=760 data=b'&`\x8a\x9cW\xb6ok~\x10Od^w\xbeI\xe8o\x1bM\xa6\xf1\x06Xw\x9e\x96\x8eke\xdc\x8b\xdd\x8e\xf7x\x08\x89\x16\x83'
Receive: 21 3483.880013 3483.879629 49: seq: 15, identify_response offset=800 data=b'>1q\x9b\xabh\x06<\xe5\x03\xb7\x02\nA\xab\xb7\x02\xe2\x0b8\x95\x8cd\xc8\x8a\xbe \xb1\x9e,v\xe0O\x14\x9f\xa0\xff\xfaK\xe1'
Receive: 22 3483.881600 3483.881246 49: seq: 16, identify_response offset=840 data=b'\x80\xe1\xd1\xe7\xd8\xe1-\xc0E\x9e,\xb4\xcf\xcd$\xec\x97\x81\x06\xdaX\x84c\x92s\x1a\xce\xd0\xf0\n\x0c\x9a\xbb\x8e\x14\x84\x88\x8e\xb1n'
Receive: 23 3483.883264 3483.883003 49: seq: 17, identify_response offset=880 data=b'K\xb1}\xcc\xe0\xae\xedZ=W&\xc5tH\x05\x0e\x10Jd\xb1&\xa3;\x9c\xe2\xe3\\Vq\xedFBB\xd4w9\xdf>\x86\x0b'
Receive: 24 3483.884767 3483.884542 49: seq: 18, identify_response offset=920 data=b'\x13%o\x06\xd8\x9c\xb5\xdb-\xec\xa2\x8c\xcaF%\xd8\xc78hu\x0c+\xcd\xd5\xd2\x83\x8c]\xe9$M\t\xc7~\xf4\xb6Y\xc12t'
Receive: 25 3483.886195 3483.885960 49: seq: 19, identify_response offset=960 data=b'%\xb3,\xe0x\xa2\x017\xb0\x9c\x11\xa8\xbb\x1c\x9d\x13\x897\x16a\x9e1\xfc\x9f\xcaV;e\xd3\xfe\xd8}A\xd6\xb3\x03\xc2=/n'
Receive: 26 3483.887641 3483.887402 49: seq: 1a, identify_response offset=1000 data=b'\xbd\x88\x1d\xd9S\xcd\xd2\x0c\xcbA\xd7\x82=\xcf\xf7\xf7\x02Vd\x16\x98\xa5\n\xcf\xe4_\x1e\x8b\xc2\xe7P\xc0RV\x1e\xb3\xa8\xfb\xac\x84'
Receive: 27 3483.889098 3483.888853 49: seq: 1b, identify_response offset=1040 data=b'\xd3\x19\xc1\\\xc2Ib\x10\x0e\xa2\xc73\xec\xa1y@\xb0\x10[\x12ObOw\xcc_~\xfb\x88\x93K\xa0\x0f\xf0\xd3`\xbe\xa5\x7f\x07'
Receive: 28 3483.890519 3483.890264 49: seq: 1c, identify_response offset=1080 data=b't\xee\x91\x1f\xcb\xde\xec\x1e\xad\x9f&\x04\x89!\xd1Y\xc2Q\x12{\xf9 \xdb\x95%\x98\x86\xf9c\xc8qj\x901\x8a\xd8\xdc\x07\xd5\x83'
Receive: 29 3483.891939 3483.891684 49: seq: 1d, identify_response offset=1120 data=b'\x1c\xa71\xae\xbd\xca\x9b\xe0\x17n/\x04+\xa5\x8cF\x85\x1e\xb5\xee|\x13\xc0\x02\xa3@\x1c\xff\xa4\xb3\x04\x15N\x17\x1d )\xb6U.'
Receive: 30 3483.893431 3483.893150 49: seq: 1e, identify_response offset=1160 data=b'b\xd7\x9c$&@\x94\x12Q\xc3\x1f4\x0b\x10\x1c\xad\xb7\x10=\xf9\xcf\x80\x90|\xa9\xfd\xef\x89\x15\x88Sof\x84\xf9\x8dd\tD\n'
Receive: 31 3483.894983 3483.894705 49: seq: 1f, identify_response offset=1200 data=b'\x17\xe6e)X\x82l\x9d\xb19/\x93\x84\x84\xe7\xf9)\x0f\x1a\xc5\x06:`\xfe\xea\xc7m\x9d\xce\x82\x0f\xe6^Z\x0b$\xa9#\x91\xed'
Receive: 32 3483.896500 3483.896287 49: seq: 10, identify_response offset=1240 data=b'v\xb8\xcf{\xee\xd3\xd6B\xb6&J\xd7\xad\x14\xc7\xd2\x97\x83E\xe35-\xfa\xfc9"<\xaf\xca\x8c^\n0\xc9f\x8au<\xbe$'
Receive: 33 3483.897736 3483.897542 49: seq: 11, identify_response offset=1280 data=b'\xb8\x1b\xe5@\x19\x061\xf0\xcd\x02sLk\xe6\xc1\xc6!\xa8\xd0\x89\xb6B\xc1\x95\xd9X\xebE^\xa0\x80%u\x063\x11\xb5\n16'
Receive: 34 3483.899057 3483.898796 49: seq: 12, identify_response offset=1320 data=b"\x02Q%\x86\xa8D\x8d2D\x07q\xc4|@\xb5<\xbc\xc1\xcf\x8cx\xd7\xf6:,\x93\xafP\xdfVI\xf8C'\xe0J\xfc$`c"
Receive: 35 3483.900521 3483.900321 49: seq: 13, identify_response offset=1360 data=b'W\x9a\x9d\xc2G\x02\x83\xa6\x90u\xcckx\xb6\x14?\x99l\x0b\xeb\xf2\x8b\xf7\x97\xd9\xd5\xc5\xbf0\x95\xdb\xc0\x15]\xfe\xfd\xd3\xe5\xdf\xb2'
Receive: 36 3483.901745 3483.901555 49: seq: 14, identify_response offset=1400 data=b'\x9f~\xfd\xf0\x0b\xc6+\xfa;Y\\]~]\x9c/*(\xf6\x1f\xa0\xac\xff|y\xa1l\xc5\x90\x81B}\xfe\xe7\x15}F\xe1\n\xe5'
Receive: 37 3483.902956 3483.902766 49: seq: 15, identify_response offset=1440 data=b"s\xfd\xe5\xe2\xcbuv\xfd\xf5\xea\xfa\x97\xec\xdd\xc5\xf5\x07Ld\xd2'LeFH\xaeTA\xa0\xba\x02\xba\xee\xd2\xc3\xb3\xe5\xe2\xfc\xdf"
Receive: 38 3483.904166 3483.903954 49: seq: 16, identify_response offset=1480 data=b'\xcb\x93\xd5o\x80\t\x9a\xa6\xda\x06*\x10\xe2\xbc\xdah\xfd\x1b\xa4-\x9dh\t1\\\x9b\xefb/\xba\xe5\x8f\xcfA\x02\x0b\x81\xf9\x19,'
Receive: 39 3483.905433 3483.905257 49: seq: 17, identify_response offset=1520 data=b'\xb4\xb0\x04lx\n\x8b,l\x9d\xc63XlaA\x006:\x05&\x0e\x18\xc7snR\x07\\\x85svV\x8e\xd5e0\xe7g\xed'
Receive: 40 3483.906624 3483.906447 49: seq: 18, identify_response offset=1560 data=b'\x80\xd1\xd20\x04\x1e\x87N\x0f\x03\x04\xa5I\x02&\x1e\xa4\x0e\x14x `\xd5\x07\x85\x1e\x08\xee\xcd\x07E\x1eh\x1dO@\xb1\x03\xa5\xa0'
Receive: 41 3483.907795 3483.907619 49: seq: 19, identify_response offset=1600 data=b'\x1e>(\xf1@\xc1\x94\x8d\xd4\x03ES6V\x1e(Vl<M\xbc#\x94\x1bJ\x19\x82(\x8a\x16\xe7\xa0\x90\xb9L\x96\xf1\xaaT\xa9'
Receive: 42 3483.909063 3483.908877 49: seq: 1a, identify_response offset=1640 data=b'\xdcP\xf1d\x19\x847\xa0c\x9aJk\x14\x0cK~\xb7\xd4Z\xa5\xf6\xa3\xa9@M\x81F\xfa\x93\xa1\x9aL\x82\xd0\x9f\x8c\xd4\xe4\xca\x88'
Receive: 43 3483.910251 3483.910074 49: seq: 1b, identify_response offset=1680 data=b'\x86&c5\x19,\xc3\xd8\x9fMh6\\O\xb6Ji\xd6^\t\xcd\xaeh\x16\xfc\x9c9+\xa4)\x02\xfdD\x0f\x85M&Jm\x99'
Receive: 44 3483.911437 3483.911259 49: seq: 1c, identify_response offset=1720 data=b'LY\xf0\x96R5j\x90\\T\x15\xd3\x06h"\x93d\xf5(\x07\xb6\xcf\xef8\x96i\x98\x92q?\xf2PbyQ\xa1\x07{d\xa6'
Receive: 45 3483.912700 3483.912520 49: seq: 1d, identify_response offset=1760 data=b'Z()\xac^\xe6\rk\xda\x81\x81+c\x18\x0e\x18\xdc\x04\x113E\xcc\xee\xf7\x02\xc6\xe4Y$\xeb\xc07\x02\x8b\x14\xb7\x81\xf6\xf5\x80'
Receive: 46 3483.913913 3483.913733 49: seq: 1e, identify_response offset=1800 data=b'q\x12\xea\xd9\x1d\xac\n\xbb\xe7\x03\x13\x92\xe5z/\xaa\xde\xa9\x8a\xd1\xc8\x12Q\xd1+Q\xadE\xb3*MP\xa9\x16l\xc7\x1bf\n\\'
Receive: 47 3483.915109 3483.914931 49: seq: 1f, identify_response offset=1840 data=b'K\x0fA\xf0\x92\x9a\x89\xac\xcb{\t \xd5iRe\x8c\x01\xf4\x1cR\x149\xa8\x96\xe2e;V%\x9dK\xb9\xde\xf7\xd7\xc1\xfa\x1d\xa4'
Receive: 48 3483.916485 3483.916329 49: seq: 10, identify_response offset=1880 data=b'\xa2\xc8\x16\x10\x0f{\x1cPs\xe5\xbbP\xd9\x0f\xe01K\xc8x\xc4\xf0\x86R\xdc\xef$\xab\xc7\x81?X:\x88\xd6\x06oz\xb3X\x01'
Receive: 49 3483.917749 3483.917570 49: seq: 11, identify_response offset=1920 data=b'\x1b\x08\x84\x1f\xd9\xf6\x90\xa1\x94Z4\x1dm\xcd\xa8RC\xf7\xfa\x01\x0f\xcf \xf4\rX\x07\xd7-\xb0\xd16B\x07\x1f\x8d\x87\xe5\t\xe1'
Receive: 50 3483.918941 3483.918765 49: seq: 12, identify_response offset=1960 data=b"A`$7\xca\xe8\xd4\x89]\x01\xbfq\x85\xe9\xd6T\x07\xfd\xd4\xf6\x05\xb7\xbd\x10\xa6{\xb9T|\xfd\xfc\xf9\xe3'\x86\x86\xcb@\x99\x05"
Receive: 51 3483.920187 3483.919956 49: seq: 13, identify_response offset=2000 data=b'\xa0\xa1\x1c\xb6\x90\x02\x96\xd4\xa8\xfcH)\xad\xb7.v\t\x99(O0Q\xd4rkA\x97T\xdfXsA\xcd\xa0\x17H\x95\x96#%'
Receive: 52 3483.921404 3483.921223 49: seq: 14, identify_response offset=2040 data=b'\xdc\xc5\x90\x83@^\xff\xf8\x9a2/Cd\x9a\xa8\xae\xa7K\x89)\xa5\x1f\x06\xcb\x1ee2\x07h\xa8[`;\x90\xd5Rg\xc4\x00\xeb'
Receive: 53 3483.922604 3483.922427 49: seq: 15, identify_response offset=2080 data=b'\x16,K\xab\x17\xc3\xf6\x1dFQ\x07\xb6\xcd>\xdb\xde\xa3\xc6\xc8\x01\\W\x94v\x7f\xcc\xf3\r\x12X\x04#?\x87\xbd\n3kZ~'
Receive: 54 3483.923796 3483.923622 49: seq: 16, identify_response offset=2120 data=b'\xda\xd2\x19HKEr*r\xe7X\x06\xe4\x9d\x0b\x9bj&\xd8\x87\xab\xc9\xbc.\x7f\xd45\xd2\xce\x91w\xa8Iy\xe3\xe1`.r\x95'
Receive: 55 3483.925066 3483.924878 49: seq: 17, identify_response offset=2160 data=b'?\xa0\xee\xae\x8d\xbc\xa9\xfdu\xc5\xa5\xccw\x9c\xf1\xa6\x80\xf4\xd0\x18(\xdc\xce\x95\x90\x92\xc3\x96Pj\x96c\x85\xfa\x06\xc4\x98\x953\x9d'
Receive: 56 3483.926255 3483.926079 49: seq: 18, identify_response offset=2200 data=b'\xa8(c\xe0w\x1c/\n\x13\xf2\xe7\t\xf6y_*\x0f\xa5\xb1\xb1\x81\xfe<\xb6\x91\x8bF\xc6*\xe6\n\xafR\x952\x0cF\xfd\xb6j'
Receive: 57 3483.927454 3483.927278 49: seq: 19, identify_response offset=2240 data=b'\xef\xa9x\xfa\x95\xeb\x05`)4\xa0^Y\x1cx\xd3.G\x9f\x82\xbd\x89k\x8bp\xc07\xbb\x17\xe0\x97\xf9C\xc1\x01\xea\xb7=)\x17'
Receive: 58 3483.928738 3483.928547 49: seq: 1a, identify_response offset=2280 data=b'u\x94\x13\x96^\xa0\xc2\x8e\xb3GeN\xfc\x02\x05\x16\xee\xd7|\xd0w\xa2\xd8F\x0cQ\x8f\xb5\x993\xb6\x00r\xb8\xb6v\x8d\x8d\x18X'
Receive: 59 3483.929950 3483.929771 49: seq: 1b, identify_response offset=2320 data=b'L\xf9]\xe5\xce\xfcg\x8ek\xed\x88\x87\xb6e\xdb\\\xc9\x84\xe4\x81}\xa7/\xbe\x8ah\xbf\xa7Z\xc0\x94\xfb~QRDJpK\x92'
Receive: 60 3483.931143 3483.930967 49: seq: 1c, identify_response offset=2360 data=b'\xab>\xda\x17\xf8\x02\xdd\x7f\xc4\xbe\xb9\xf6\x1d\x92\xaa\x07\x0bA\x8d\xb5\x10l\xa9\x7fm\xf2\x1b\x8cF\xadVd%\r\xc2\xa0\xae\xa8C\x00'
Receive: 61 3483.932404 3483.932227 49: seq: 1d, identify_response offset=2400 data=b'M\x80\x8b\xc5\x15 a\x1a*\xaa\x9e\x1cXy\x9c\xb9\xef\xa2\x17\xa3\x19R^\x16\x16\x8c5\xc9\x1c\xacc\x81\x8d\xc4\x067^\x1d\xe0\xba'
Receive: 62 3483.933620 3483.933440 49: seq: 1e, identify_response offset=2440 data=b'\x93\xd2\xe3\xc3\x1c\xecs\x04\xda\xcb\xe9\xc9k\x86\x85\x8av\x80\x96\x1c\xa09\xd9Q/\xc4\x81U4\x9a\xb0\x12\xf8`\x0c\xbf\xd7\x9f?\xaa'
Receive: 63 3483.934821 3483.934645 49: seq: 1f, identify_response offset=2480 data=b'\xc2\x8e\x9a\x1c\x870\xd9qL\x1a\x92x\x0el\xda\xe6\xf4\x06#\x8f\xb2\xbd\x19\x17\x13&\xb5\x034R\xd3\xfe*\x99\xdc!5\xf5p\xe9'
Receive: 64 3483.936078 3483.935849 49: seq: 10, identify_response offset=2520 data=b'N\xd0+\x9a\x86\x11`r\x06\xb8]\xf5\xae\x98\x15\xfb\xb1\xb9\x05\xe5\x83T\xa5\xa4\xe7*o^:\x00\xc8\x84\xbc\x9e\x0e\xb2\xe8\xd4\xa1\xd8'
Receive: 65 3483.937288 3483.937110 49: seq: 11, identify_response offset=2560 data=b"\x92\xac\x90LU\x1c^\xa7\x9f\x92\x92\xb6\xa9 \x8f\xb9\x83\x05\x88\t\x95\x9eX\x13\xd9\x1c4:\xcf\xd9'\xc8\x87\xa0\xcc\xb9\xc1*m\x8b"
Receive: 66 3483.938489 3483.938312 49: seq: 12, identify_response offset=2600 data=b'\x8dn\xf9\x17jd\xab\x97O\x9b\x1a\xe9\xf7\xd0\x92\xba\xd7\x12\xdb\x95\xe8\xe1\xc9\xf7\x14\x00FPl\xabR\x15\\\x945Uy\x8f)\x03'
Receive: 67 3483.939686 3483.939510 49: seq: 13, identify_response offset=2640 data=b"\xbe\x84\x1c\xa9\xf7\xd0\x84\xc9\x83\xe3+\x85\xce\xa0\xc8\xe3a\x95\x0b\xb9\xe6A'\x1f\x93M(\xde\xa2`\x9d$*\xbb\xd6\x1f\xa9J\xaf\xe9"
Receive: 68 3483.940946 3483.940765 49: seq: 14, identify_response offset=2680 data=b'#M\x94?\x80\x8f4]\xc18zzR\xdd\x1d\xc8M$\xa7\x07^\xdd\xd3\xf4Kv\x891\xb3)\xf8\xacsz\x8a\xd28\xda\x03u'
Receive: 69 3483.942186 3483.941976 49: seq: 15, identify_response offset=2720 data=b"\xdd'\xddd3E15q\xfc\xe5n\xc6\xed\x96\x83\xe7B\xaa\xad\xd8\xb6\xf8[\t\xef\x19\x17\xbb,\xa7\xe8\x15m3u\xd2;\xa7%"
Receive: 70 3483.943497 3483.943308 49: seq: 16, identify_response offset=2760 data=b'\x8fu\xbb6\x91{A\x9eP\xe4^\xa7\x94)\x88>\x0fzC\xca\xbd\\\xf9\xbf\xb6\xaf\x99\xe0\x96t\xdb]\x9dPu\xe7q\xce\xa8\x91'
Receive: 71 3483.944797 3483.944598 49: seq: 17, identify_response offset=2800 data=b'\xea\xba@4\xf2\x19_\xab\xf7$\xd5\x80}\x89kM\xa1\x07\x99\xdb\xfd\x14\xe3\xa8y\x12\x91\xe0\x93\xed\x0b\xc7\x1a\x1fQ\xa83k@/'
Receive: 72 3483.946007 3483.945817 49: seq: 18, identify_response offset=2840 data=b'\tD\x90K\xd7\x8b.\xddk\xc4\x84\xab}[\x83\xf1\x1f.\xe2?v\x80`\xbd\x06\x7ff\x94\xc7\xb52\xe8\xdb\xa8H\xe8\x9a\xf8\x1e\xae'
Receive: 73 3483.947224 3483.947030 49: seq: 19, identify_response offset=2880 data=b'\xed\xe6\x936\x9d!.0\xe5I\x93\xcdk)-PX\xcf4\x85\xbfGE\xb1d9\xdaD\xfeS*:\x1eQQ\xac\xea\xec\xa3\xc3'
Receive: 74 3483.948537 3483.948339 49: seq: 1a, identify_response offset=2920 data=b'\xf4F\xe4X\x14\xea\r\xba@<8\x01H\xc1\x7f\xf7Zc#\xccEr\xf3Dp\\\x00\x91_R\x7f\x97\x08V>\x85\xd7\x14\xf3\t'
Receive: 75 3483.949798 3483.949608 49: seq: 1b, identify_response offset=2960 data=b'\x10o}\xac\x95yp\xc1~s\xdc\xbfi\xcc(\xfd\xde\xe174c\x13\xabr\xb9\x1fT\xc9\xb0\x0e\xa8x\x96\xce\x14\xe4X\xeb\x1f\xf9'
Receive: 76 3483.951045 3483.950817 49: seq: 1c, identify_response offset=3000 data=b';i|\xec\xba\x81\xb3V!=\xeb@\x9c\xd9,g\x8e\xf1;Lc4\xa6\x81\xaa\x9d\xb8\xfe\xe1!\xff\xd89\xa4\xb3F~O\xd0\xd9'
Receive: 77 3483.952419 3483.952225 49: seq: 1d, identify_response offset=3040 data=b'O\x91\xdb\x06\xe5\xd1\x87@\xcf\xaflB\xf4\xfb\xaaV\xa6W\xf1\xd1w:\t\xb8e\xfd_=\x8b\xf3\xc5\xdd\xf2,\x08\xce\x96`\xb7\xcb'
Receive: 78 3483.953648 3483.953459 25: seq: 1e, identify_response offset=3080 data=b"\xd3\xdd*\t\x82 \t\xf2\xc5\xd3\x7f\x01'\xb3\xf7!"
Receive: 79 3483.954855 3483.954666 9: seq: 1f, identify_response offset=3096 data=b''
Receive: 80 3484.047087 3484.046876 12: seq: 10, uptime high=0 clock=201552834
Receive: 81 3484.100498 3484.100308 11: seq: 11, clock clock=204223456
Receive: 82 3484.152994 3484.152799 11: seq: 12, clock clock=206848194
Receive: 83 3484.204570 3484.204378 11: seq: 13, clock clock=209427008
Receive: 84 3484.256101 3484.255872 11: seq: 14, clock clock=212003310
Receive: 85 3484.307657 3484.307458 11: seq: 15, clock clock=214581221
Receive: 86 3484.359245 3484.359060 11: seq: 16, clock clock=217160618
Receive: 87 3484.411550 3484.411350 11: seq: 17, clock clock=219775795
Receive: 88 3484.463132 3484.462949 11: seq: 18, clock clock=222355027
Receive: 89 3484.466488 3484.466310 11: seq: 19, clock clock=222522804
Receive: 90 3484.486097 3484.485887 10: seq: 1a, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 91 3484.489564 3484.488892 12: seq: 1c, shutdown clock=223667267 static_string_id=Unable to open out GPIO chip line
MCU error during connect
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 754, in _connect
    config_params = self._send_get_config()
  File "/home/biqu/klipper/klippy/mcu.py", line 730, in _send_get_config
    raise error("MCU '%s' error during config: %s" % (
mcu.error: MCU 'host' error during config: Unable to open out GPIO chip line
Build file /home/biqu/klipper/klippy/../.config(757): Fri May 19 14:45:32 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
CONFIG_MACH_LINUX=y
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="linux"
CONFIG_CLOCK_FREQ=50000000
CONFIG_LINUX_SELECT=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/biqu/klipper/klippy/../out/klipper.dict(9215): Fri May 19 14:46:51 2023
Last MCU build version: v0.11.0-200-g7511151a
Last MCU build tools: gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2
Last MCU build config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Build file /home/biqu/klipper/klippy/../out/klipper.elf(819720): Fri May 19 14:47:11 2023
Transition to shutdown state: MCU 'host' shutdown: Unable to open out GPIO chip line
Dumping 12 requests for client 281472769420160
Received 3483.049765: b'{"id": 281472996628464, "method": "info", "params": {"client_info": {"program": "Moonraker", "version": "v0.8.0-40-gb21f177"}}}'
Received 3483.085022: b'{"id": 281472996629712, "method": "list_endpoints", "params": {}}'
Received 3483.094437: b'{"id": 281472996627648, "method": "info", "params": {}}'
Received 3483.123035: b'{"id": 281472996628032, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 3483.152447: b'{"id": 281472996628608, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "print_stats": ["print_duration", "total_duration", "filament_used", "filename", "state", "message", "info"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "webhooks": ["state", "state_message"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "extruder": ["target", "temperature", "pressure_advance", "smooth_time", "power"], "heater_bed": ["target", "temperature", "power"], "temperature_sensor mcu_temp": ["target", "temperature", "power"], "temperature_fan raspberry_pi": ["target", "temperature", "power"], "heater_fan heatbreak_cooling_fan": ["speed"]}, "response_template": {"method": "process_status_update"}}}'
Received 3483.173154: b'{"id": 281472996626736, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "temperature_sensor mcu_temp": null, "temperature_fan raspberry_pi": null, "heater_fan heatbreak_cooling_fan": null}}}'
Received 3483.346167: b'{"id": 281472996627936, "method": "info", "params": {}}'
Received 3483.543327: b'{"id": 281472996628416, "method": "info", "params": {}}'
Received 3483.600964: b'{"id": 281472996628416, "method": "info", "params": {}}'
Received 3483.856299: b'{"id": 281472996627696, "method": "info", "params": {}}'
Received 3484.111397: b'{"id": 281472996627504, "method": "info", "params": {}}'
Received 3484.366178: b'{"id": 281472996627696, "method": "info", "params": {}}'
Reactor garbage collection: (3484.047090535, 0.0, 0.0)
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=168000000 last_clock=705250071 clock_est=(3483.494 645206018 167982327.843) min_half_rtt=0.000245 min_rtt_time=3483.846 time_avg=3483.494(0.019) clock_avg=645206018.364(3133820.036) pred_variance=20805037668.624
Dumping serial stats: bytes_write=1301 bytes_read=4526 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 3483.307045 3483.307045 9: seq: 10, identify offset=1280 count=40
Sent 1 3483.309047 3483.309047 9: seq: 11, identify offset=1320 count=40
Sent 2 3483.311047 3483.311047 9: seq: 12, identify offset=1360 count=40
Sent 3 3483.313057 3483.313057 9: seq: 13, identify offset=1400 count=40
Sent 4 3483.315041 3483.315041 9: seq: 14, identify offset=1440 count=40
Sent 5 3483.317089 3483.317089 9: seq: 15, identify offset=1480 count=40
Sent 6 3483.319047 3483.319047 9: seq: 16, identify offset=1520 count=40
Sent 7 3483.321120 3483.321120 9: seq: 17, identify offset=1560 count=40
Sent 8 3483.323046 3483.323046 9: seq: 18, identify offset=1600 count=40
Sent 9 3483.325067 3483.325067 9: seq: 19, identify offset=1640 count=40
Sent 10 3483.327077 3483.327077 9: seq: 1a, identify offset=1680 count=40
Sent 11 3483.329092 3483.329092 9: seq: 1b, identify offset=1720 count=40
Sent 12 3483.331062 3483.331062 9: seq: 1c, identify offset=1760 count=40
Sent 13 3483.333071 3483.333071 9: seq: 1d, identify offset=1800 count=40
Sent 14 3483.335113 3483.335113 9: seq: 1e, identify offset=1840 count=40
Sent 15 3483.337074 3483.337074 9: seq: 1f, identify offset=1880 count=40
Sent 16 3483.339052 3483.339052 9: seq: 10, identify offset=1920 count=40
Sent 17 3483.341066 3483.341066 9: seq: 11, identify offset=1960 count=40
Sent 18 3483.343052 3483.343052 9: seq: 12, identify offset=2000 count=40
Sent 19 3483.345252 3483.345252 9: seq: 13, identify offset=2040 count=40
Sent 20 3483.348389 3483.348389 9: seq: 14, identify offset=2080 count=40
Sent 21 3483.350217 3483.350217 9: seq: 15, identify offset=2120 count=40
Sent 22 3483.352107 3483.352107 9: seq: 16, identify offset=2160 count=40
Sent 23 3483.354068 3483.354068 9: seq: 17, identify offset=2200 count=40
Sent 24 3483.356104 3483.356104 9: seq: 18, identify offset=2240 count=40
Sent 25 3483.358076 3483.358076 9: seq: 19, identify offset=2280 count=40
Sent 26 3483.360112 3483.360112 9: seq: 1a, identify offset=2320 count=40
Sent 27 3483.362060 3483.362060 9: seq: 1b, identify offset=2360 count=40
Sent 28 3483.364113 3483.364113 9: seq: 1c, identify offset=2400 count=40
Sent 29 3483.366046 3483.366046 9: seq: 1d, identify offset=2440 count=40
Sent 30 3483.368087 3483.368087 9: seq: 1e, identify offset=2480 count=40
Sent 31 3483.370068 3483.370068 9: seq: 1f, identify offset=2520 count=40
Sent 32 3483.372121 3483.372121 9: seq: 10, identify offset=2560 count=40
Sent 33 3483.374052 3483.374052 9: seq: 11, identify offset=2600 count=40
Sent 34 3483.382456 3483.382456 9: seq: 12, identify offset=2640 count=40
Sent 35 3483.384539 3483.384539 9: seq: 13, identify offset=2680 count=40
Sent 36 3483.386391 3483.386391 9: seq: 14, identify offset=2720 count=40
Sent 37 3483.388487 3483.388487 9: seq: 15, identify offset=2760 count=40
Sent 38 3483.390452 3483.390452 9: seq: 16, identify offset=2800 count=40
Sent 39 3483.392484 3483.392484 9: seq: 17, identify offset=2840 count=40
Sent 40 3483.394298 3483.394298 9: seq: 18, identify offset=2880 count=40
Sent 41 3483.396126 3483.396126 9: seq: 19, identify offset=2920 count=40
Sent 42 3483.398112 3483.398112 9: seq: 1a, identify offset=2960 count=40
Sent 43 3483.400108 3483.400108 9: seq: 1b, identify offset=3000 count=40
Sent 44 3483.402139 3483.402139 9: seq: 1c, identify offset=3012 count=40
Sent 45 3483.421895 3483.421895 6: seq: 1d, get_uptime
Sent 46 3483.475808 3483.475808 6: seq: 1e, get_clock
Sent 47 3483.530104 3483.530104 6: seq: 1f, get_clock
Sent 48 3483.584297 3483.584297 6: seq: 10, get_clock
Sent 49 3483.637134 3483.637134 6: seq: 11, get_clock
Sent 50 3483.689527 3483.689527 6: seq: 12, get_clock
Sent 51 3483.741436 3483.741436 6: seq: 13, get_clock
Sent 52 3483.793569 3483.793569 6: seq: 14, get_clock
Sent 53 3483.845627 3483.845627 6: seq: 15, get_clock
Sent 54 3483.850969 3483.850969 6: seq: 16, get_clock
Sent 55 3484.465634 3484.465634 12: seq: 17, debug_read order=1 addr=536836652
Sent 56 3484.467575 3484.467575 12: seq: 18, debug_read order=1 addr=536836654
Sent 57 3484.469669 3484.469669 6: seq: 19, get_config
Sent 58 3484.476626 3484.476626 7: seq: 1a, allocate_oids count=27
Sent 59 3484.477143 3484.477143 12: seq: 1b, config_tmcuart oid=0 rx_pin=PD6 pull_up=0 tx_pin=PD6 bit_time=4200
Sent 60 3484.477472 3484.477472 12: seq: 1c, config_tmcuart oid=1 rx_pin=PD1 pull_up=0 tx_pin=PD1 bit_time=4200
Sent 61 3484.477620 3484.477620 12: seq: 1d, config_tmcuart oid=2 rx_pin=PD15 pull_up=0 tx_pin=PD15 bit_time=4200
Sent 62 3484.477755 3484.477755 12: seq: 1e, config_tmcuart oid=3 rx_pin=PD11 pull_up=0 tx_pin=PD11 bit_time=4200
Sent 63 3484.477856 3484.477856 8: seq: 1f, config_analog_in oid=15 pin=PA1
Sent 64 3484.478003 3484.478003 15: seq: 10, config_digital_out oid=16 pin=PB4 value=0 default_value=0 max_duration=840000000
Sent 65 3484.478111 3484.478111 11: seq: 11, set_digital_out_pwm_cycle oid=16 cycle_ticks=16800000
Sent 66 3484.478245 3484.478245 11: seq: 12, config_digital_out oid=17 pin=PB6 value=0 default_value=1 max_duration=0
Sent 67 3484.478346 3484.478346 11: seq: 13, set_digital_out_pwm_cycle oid=17 cycle_ticks=1680000
Sent 68 3484.478475 3484.478475 11: seq: 14, config_digital_out oid=18 pin=PB5 value=0 default_value=0 max_duration=0
Sent 69 3484.478572 3484.478572 11: seq: 15, set_digital_out_pwm_cycle oid=18 cycle_ticks=1680000
Sent 70 3484.478733 3484.478733 14: seq: 16, config_st7920 oid=4 cs_pin=PB1 sclk_pin=PE10 sid_pin=PE11 sync_delay_ticks=7560 cmd_delay_ticks=3360
Sent 71 3484.479083 3484.479083 24: seq: 17, config_buttons oid=19 button_count=3, config_analog_in oid=20 pin=ADC_TEMPERATURE, config_stepper oid=5 step_pin=PD5 dir_pin=PD4 invert_step=4294967295 step_pulse_ticks=0, config_digital_out oid=21 pin=PD7 value=1 default_value=1 max_duration=0
Sent 72 3484.479261 3484.479261 9: seq: 18, config_endstop oid=6 pin=PC0 pull_up=1
Sent 73 3484.479337 3484.479337 7: seq: 19, config_trsync oid=7
Sent 74 3484.479500 3484.479500 11: seq: 1a, config_stepper oid=8 step_pin=PD0 dir_pin=PA15 invert_step=4294967295 step_pulse_ticks=0
Sent 75 3484.479636 3484.479636 11: seq: 1b, config_digital_out oid=22 pin=PD3 value=1 default_value=1 max_duration=0
Sent 76 3484.479747 3484.479747 9: seq: 1c, config_endstop oid=9 pin=PC1 pull_up=1
Sent 77 3484.479825 3484.479825 7: seq: 1d, config_trsync oid=10
Sent 78 3484.479965 3484.479965 11: seq: 1e, config_stepper oid=11 step_pin=PC6 dir_pin=PC7 invert_step=4294967295 step_pulse_ticks=0
Sent 79 3484.480185 3484.480185 11: seq: 1f, config_digital_out oid=23 pin=PD14 value=1 default_value=1 max_duration=0
Sent 80 3484.480303 3484.480303 9: seq: 10, config_endstop oid=12 pin=PC2 pull_up=1
Sent 81 3484.480397 3484.480397 7: seq: 11, config_trsync oid=13
Sent 82 3484.480496 3484.480496 8: seq: 12, config_analog_in oid=24 pin=PA0
Sent 83 3484.480647 3484.480647 15: seq: 13, config_digital_out oid=25 pin=PB3 value=0 default_value=0 max_duration=840000000
Sent 84 3484.480751 3484.480751 11: seq: 14, set_digital_out_pwm_cycle oid=25 cycle_ticks=16800000
Sent 85 3484.480893 3484.480893 11: seq: 15, config_stepper oid=14 step_pin=PD12 dir_pin=PD13 invert_step=4294967295 step_pulse_ticks=0
Sent 86 3484.481025 3484.481025 11: seq: 16, config_digital_out oid=26 pin=PD10 value=1 default_value=1 max_duration=0
Sent 87 3484.481171 3484.481171 11: seq: 17, finalize_config crc=2148372726
Sent 88 3484.481345 3484.481345 26: seq: 18, query_analog_in oid=15 clock=1033200000 sample_ticks=168000 sample_count=8 rest_ticks=50400000 min_value=12005 max_value=32303 range_check_count=4
Sent 89 3484.481480 3484.481480 13: seq: 19, queue_digital_out oid=16 clock=843050992 on_ticks=0
Sent 90 3484.481592 3484.481592 13: seq: 1a, queue_digital_out oid=17 clock=843079374 on_ticks=0
Sent 91 3484.481701 3484.481701 13: seq: 1b, queue_digital_out oid=18 clock=843099770 on_ticks=0
Sent 92 3484.481828 3484.481828 10: seq: 1c, buttons_add oid=19 pos=0 pin=PB2 pull_up=1
Sent 93 3484.481944 3484.481944 10: seq: 1d, buttons_add oid=19 pos=1 pin=PE7 pull_up=1
Sent 94 3484.482172 3484.482172 22: seq: 1e, buttons_add oid=19 pos=2 pin=PE9 pull_up=1, buttons_query oid=19 clock=1039920000 rest_ticks=336000 retransmit_count=50 invert=4
Sent 95 3484.482399 3484.482399 25: seq: 1f, query_analog_in oid=20 clock=1041600000 sample_ticks=168000 sample_count=8 rest_ticks=50400000 min_value=6968 max_value=9449 range_check_count=4
Sent 96 3484.482583 3484.482583 26: seq: 10, query_analog_in oid=24 clock=1048320000 sample_ticks=168000 sample_count=8 rest_ticks=50400000 min_value=1503 max_value=32303 range_check_count=4
Sent 97 3484.482699 3484.482699 13: seq: 11, queue_digital_out oid=25 clock=843509024 on_ticks=0
Sent 98 3484.482949 3484.482949 6: seq: 12, get_config
Sent 99 3484.513826 3484.513826 6: seq: 13, emergency_stop
Dumping receive queue 92 messages
Receive: 0 3483.244077 3483.243021 48: seq: 11, identify_response offset=0 data=b'x\xda\xa5Z{o\xe4\xb6\x11\xff*\xec\x02A\x93\xc6k\xac\xa4}\x1a\xc8\x1f\xf6\x9e\x93;\xb4N\x9c\xb3\xaf-\x10\x04\x82,qw\x89'
Receive: 1 3483.246080 3483.245059 48: seq: 12, identify_response offset=40 data=b'\xd3+\xa2\xe4G\x03\x7f\xf7\xce\x83\xa4(\xed\xfa\x12\xb4\x05\xae\x1693|\xcc\x0c\x7f\xf3\xd8\xfc>y\xe8T\x9e\xc5\x8f\xb2\xd1\xaa*\xf5'
Receive: 2 3483.248093 3483.247033 48: seq: 13, identify_response offset=80 data=b'\xe4b\xb2O\xd3\x0b\xf1u\xb0\xb8XO\xc3Y\xb0\x99\xfe\x16M\x83o\x1f\x82o\xc4\xfa<:\x0f\x04\xce\xcdV\xb3H|\xdd\xc8\\&'
Receive: 3 3483.250081 3483.249059 49: seq: 14, identify_response offset=120 data=b'Z~#~\x01\x91\xe9z\xfa\xd0$ez\x10\x8d|T\xb8\x96\x08W\xd1,\\\xfd*\x1eT\xd9\xb5*\xd7\xb0jx\x1e-\xce\xc3i'
Receive: 4 3483.252090 3483.251036 49: seq: 15, identify_response offset=160 data=b'\xf8m0\xff\xf6!\xfcF\xf0xr6I\xab\xa2H\xca\x0c\xf6\xff}\x92\xe4y\x95&\xad\x8c+\x95i\x91V]\xd9~\xf7U:\xb9'
Receive: 5 3483.254081 3483.253050 49: seq: 16, identify_response offset=200 data=b"X\x9f\xc1a\xdb\x16N\x19'\xe9g\x01T\x98\xf6\xe8\xab\xd0c\xc82\xcbPW\x9a\xfe\xa8\xf2\xbb\xaf:Qwy\x1ew5\x0b\xcc{"
Receive: 6 3483.256175 3483.255119 49: seq: 17, identify_response offset=240 data=b'\x81\xdf:\xd9\xbc\xb85\xe1\x00\x9f\x91\xbb\x91\xba\x8d[\x95~\xd6<j\xe1\x8a\xbaPmlw\x15\xaa\x04\xd5\x99\xfd#\xb8\x07\xa8\xa4\x89'
Receive: 7 3483.258119 3483.257551 49: seq: 18, identify_response offset=280 data=b'\xf5\xa1k\xb3\xea\xa9\x9c\\\x84x\xb5r\xa7\xf6p\xa2\xe7<\x9a/\xec\x16\xbaV1\x7fN.\x16\x9b\x9e\xabL\xf2j\x1f\xab\xd2\x9d\x9e'
Receive: 8 3483.260088 3483.259356 49: seq: 19, identify_response offset=320 data=b'\x8e=\xb9\x88\xfa\x95\xcc\x91-\x07\x0fcO\x0f\x0b\xc7J\x93\xb2\x19.6\xd0\xc1\xba_7S{\xd5&y\\u\xedH\xe01\xc9;'
Receive: 9 3483.262085 3483.261081 49: seq: 1a, identify_response offset=360 data=b'\x89\xe3L\xee\x92.oc7Q$\xcfq\xd65I\x0b\x06\xa7s\x06+\xb7\x9e\x04{\xb6U=X+\x1dl\x1e.\x1d\xf3!\x9b\xcf'
Receive: 10 3483.264085 3483.263043 49: seq: 1b, identify_response offset=400 data=b'W\xeb\x99entl\xf6\x96\xf6#\x9b\xbb\xaf\x85\xfbZ\xba\xaf\x95\xfb\x92y\xf2\xe2\x8c\x06\xea\x08\xdc&*L\xed\x06\xf0\t\x8ad\xb3'
Receive: 11 3483.266079 3483.265059 49: seq: 1c, identify_response offset=440 data=b'\x82\xaf\xe1_\xf0\x19\xb07\x0b-z\xb5\x14u\xb7\t\x173_\xd0\x1an\xd9k\xba\x94U\xad\x9ee>\xd2\\\x96\xb4I\xac\xd5\x7f`'
Receive: 12 3483.268083 3483.267038 49: seq: 1d, identify_response offset=480 data=b'\x83C\x07/\xa1\x8dQc\x9eGi\tS\xaa\xf4\xce\xbb\x9e\xb9E\xeb\xa7\xe2\x845\xd2\x17\xf0\xb2~\rc\x8bC7\xb6\x0e\xcc\x1c\x99'
Receive: 13 3483.270082 3483.269063 49: seq: 1e, identify_response offset=520 data=b'g\xd1\x9fXg\xaar>\x84\x0e\xcf\xc7\x04\xa6\xf9\xbag\xaa\xd5xw|}\xadz\x94\xf1A\xed\x0f\xa4\x86h\xc0\x0f>\xbc\xcf\xe5\xb1'
Receive: 14 3483.272086 3483.271037 49: seq: 1f, identify_response offset=560 data=b"\x9f\x0bG\x8b\xdb\x97Z\xb2\x02\xc3\x81\xa4}7\xa7\x84\r).\xf4\xfe\xbb\xaf\xfe\x06@\x11E\x03\xd9'\xd5\x1e@Wqj\x1f\x06p"
Receive: 15 3483.274084 3483.273066 49: seq: 10, identify_response offset=600 data=b'\xf4\xbe\xa8\xdb\xd5&t6L\x9dw\xe94\xff\xec\xbeU\xe6>_\xca4\x1e:\x92H\x8b,\x1e\xfb\xd6\xd2\xbby+\xeb\xba\x7fj8'
Receive: 16 3483.276087 3483.275036 49: seq: 11, identify_response offset=640 data=b'\x8c\x8d\xcbg\xaa\xb1\x9f\x0c\x17\xc4\xdcsu\xb9\x96\xde\xa2a\x7f\xb1\xf6 \x9b\xa2\x82W\\\x9f\xd4\xa8O\xee\x95:\xef\x1d\xa8-\xd2.'
Receive: 17 3483.278080 3483.277051 49: seq: 12, identify_response offset=680 data=b"i\x9c\x035\xcf\xf1\x11\x04\x88\xd6M\xa2{\xb6\xaa`'X\xf5\xcak\x1b\xd4G\xafVX?\x93\x0f\x1d8}UO.6v\x04\xab"
Receive: 18 3483.280086 3483.279039 49: seq: 13, identify_response offset=720 data=b'\xec\xc9\xe1\xd9>\x81ckd\x02h\xdcd\xb2\xc1\xfd\xf0\x991T\x84\x96\xe1\xa9Q\xad<\xe2@\xcffFx\xc1\xb2\x90\xcd^\x96\xe9'
Receive: 19 3483.282080 3483.281062 49: seq: 14, identify_response offset=760 data=b'K\x8c\x98\x02\x87\x80)\xc6\x97\xf8P\x15\xf2\x08\xb9uR\xd4\xfe+1c\x87\xdbCd\x87\xa3\xf7\x98\xc6\xd7u:n\xd4~/\x1b\xbc'
Receive: 20 3483.284099 3483.283035 49: seq: 15, identify_response offset=800 data=b'\x84\xc6G\x84\xb0\xb5\xe87\xa7\xb8\x01gJZ\xe9\x14\x14B\\\xd9)@rxP1\xebP\xa4M\xca\x1es6\xd9\xc3\x93\xa7s\xc2'
Receive: 21 3483.286082 3483.285091 49: seq: 16, identify_response offset=840 data=b's4#\xe2\x01\x9d\xf3\xb0\xab\xd1\n`\xc8\xb3\x89\x81\xc5X\xc3~1x\xa0C}\xfcf=\xaff#64\x81e\xeb\xcd\xb1\x04;'
Receive: 22 3483.288083 3483.287041 49: seq: 17, identify_response offset=880 data=b'!v\x15U\xa6v/1\xd8\xda\xad\xd5HzR\xc2\x04/8\x01RYln\xc4\xd8\x86C~\x9c\x8bsi\x90e\xc6\x8c\xc6\x96\xe3'
Receive: 23 3483.290079 3483.289052 49: seq: 18, identify_response offset=920 data=b'\xed\x17`C\x95\xc9\xb2\x85\xcdE\xb5\xdb\xc1.\xf4\xa8\\\xd4\x02\xba\xc5P\xba\x86\xd3\xe6j\xedQ\xba:\xeb5\xcd\xa1\xfd\xd0y\xdb\xac'
Receive: 24 3483.292081 3483.291037 49: seq: 19, identify_response offset=960 data=b'\xe0\xb8l\x92Q\xbc=\x1d\xd2\xe1\\\xeb\x91\x00\xd9\xb2\xebAd\xb1r\x0c\xe3\xd8\xfc?:[\xd1;\x9b\x81\xe8~\x04\xf9\xc5\x1e\x04\x0f'
Receive: 25 3483.294080 3483.293052 49: seq: 1a, identify_response offset=1000 data=b'2\xfd\xecE\xf4(\xb0g\x18\x05tw\x82\xba\x82\xf7<\xde\xdf\x8b)n\x81Q4{K-\xcb\xf9H`\xac\x96ed\x19\x8e \xff'
Receive: 26 3483.296083 3483.295040 49: seq: 1b, identify_response offset=1040 data=b"\x8d\xec\t}\x1a\x10^\xed\xf8NKw\xa4S \xf7\xc6\x1a\x9e\xea\x06\x9a\xe3\x01\x80+\xbc\xb9\xccW\x1c\xbbC'O%7n\x8f\xca"
Receive: 27 3483.298082 3483.297067 49: seq: 1c, identify_response offset=1080 data=b'\x0f\xbf\xc1\xc2\x8a\x8c\xa2\xafcw\xd6\x02\xe7\x98[fDr\x97"\xa0\x89\x18\xbc\xac\x83\x1f(\xbd\x80\xbf\n\xe0\x01p\x8f\x02?\xd8%'
Receive: 28 3483.300084 3483.299045 49: seq: 1d, identify_response offset=1120 data=b'2\x9f$\xcf\xa80\xde\x0f\x04\xe0ia\xb4\xa6G8x\xde\x80\x02\x04\x98\xcd\xbe+$\xee\x83\xd1{>\xe6\x86Dg\xb7\xeb\x9d\xa6\x7f'
Receive: 29 3483.302081 3483.301056 49: seq: 1e, identify_response offset=1160 data=b'}\xf4v1b\x84F\x84a\x86s\xf1\xb7\xf7\x10O\x89b\xfd\xce\x17N\xb0\xc5t\xca\xc5(\x9c\xe3\xf4\n\x98V\x1e\x93\xae\xa5\xcc\xfa'
Receive: 30 3483.304082 3483.303049 49: seq: 1f, identify_response offset=1200 data=b'P\x06\x03\xe6Y\x1a\x1e\x82\x8f?\xbect\xc4\xfe\xe6%{p\x98\x83\xcb\xe1\x19|_\x18e\xb8`\xff\xe8\x88\x89<\x81\xb2.w\xa6'
Receive: 31 3483.306083 3483.305063 49: seq: 10, identify_response offset=1240 data=b'A\n\x06BK\x16*\xe5\xb31%\xc4|\x07\x82\xaa\xe1\xb0`\xb6\xb7~\xf5\x07\xe9\x1cx\x17\x1e\xa5O\x9a\xb0\xf6\xf0n\xe8A\xfb\x8c'
Receive: 32 3483.308080 3483.307045 49: seq: 11, identify_response offset=1280 data=b'\xf9<\xd8\xf4\xa8\xd1\xdcR\x87&\x82)\x93\x00CH\x90^"\x0c"\xcb^DW\xbb\xf6)i\xa4/[(]\xd9\xa4\xa1\xa8\xb4:'
Receive: 33 3483.310083 3483.309047 49: seq: 12, identify_response offset=1320 data=b'\x95M\x1d-\xba0\x8b\xbe}\x8f\x08\xbd\x89\x12\xb5/\xc5\xbb\xe5j\xc8\xf5F\xb8\xc3\xdd8%\x8b1\xa6B\xa8P\x98\x05;\x00\x0b6'
Receive: 34 3483.312082 3483.311047 49: seq: 13, identify_response offset=1360 data=b'=\x03ErD\x01\x8e\xf5\xc2\x85~/\x11\x00\t\x08\x15&\xa1\x1a\xa8\x9a|\xd0\x05D\x8eY\xb0\xbb\x91F\x1d"\xf4\x9d@\x12p\x89'
Receive: 35 3483.314079 3483.313057 49: seq: 14, identify_response offset=1400 data=b'u\xcf\xd7\xfa\x89\x9a\xac\xab\xc6d\t\x8c\x824vN"\x9fk\x05&\xf1s\x92\x8d[it\x0b\x9f\tT\xc7\x11\xf4\x14\x1ezo`'
Receive: 36 3483.316089 3483.315041 49: seq: 15, identify_response offset=1440 data=b'\xfej\x93?,\xc8/\xdfm\xe3\x9b\xcb\x7fcf\xb9\x01\x13]}\xba\x8bo?\xfcx\x87\xe5T0\xb9\x98\xdc^-\xcfn\xafV\x93'
Receive: 37 3483.318081 3483.317089 49: seq: 16, identify_response offset=1480 data=b'\x11%!\xd2\x1aH\x9b\x11)$\n\xe4\x87\xf0\x7f\xc1\x98Fb\xef\xe7g\xb7\xef\x17#R\x84\x94KXp;^0b\xa1\x15\x08\xad'
Receive: 38 3483.320103 3483.319047 49: seq: 17, identify_response offset=1520 data=b'}\x12B\x04R\xb6\x90j\xde\xbe\x83\x7f[\x92\x86\x7f\xb8\xf9v\xb89\xf8&\xdd\xe6\x12ns\tK].\xc6T\xbe\x11\x1c\xedj\x01'
Receive: 39 3483.322081 3483.321120 49: seq: 18, identify_response offset=1560 data=b'\xff\xa2\x11\xd9\xdc\n\xc9\x01\xd2\x83#\x06\x92\xdf\xe21"\xa4\xcf\xc6\xf4\x07\xa4\x7f\x00\xfa\x07\xa0\x7f\x18\x1f.\xfa\xe2\xee\xac\x02\xb8\xd2\x19'
Receive: 40 3483.324091 3483.323046 49: seq: 19, identify_response offset=1600 data=b"\xdfvK\xcbo\xff\xf1\xd3\xf6\xef\xf1\xf7\x1f\xaf\x7fF\x8cZ\xcf\xe8\x7fg\x93\x9b\xed'\xe0\xd6m\x11\x85\xbb\xf9l\xf5\xfc\x0c\xac\xb7\xff"
Receive: 41 3483.326082 3483.325067 49: seq: 1a, identify_response offset=1640 data=b'\xbaa#\x87X#~\xbc\xbe\xbb\xfe\xf8\xcfk^\xfe\xd3\xdd\x15)\x06\x17\xbf\x0c\xb0]3 \xa7\xcd\x0b8oN&\x00\xb5\xbe\xc7\x83'
Receive: 42 3483.328094 3483.327077 49: seq: 1b, identify_response offset=1680 data=b'\xdf\xdd_\xde\xdf\xc5w\x9fn\xee~\x8e\xaf.\xef\xaeq\xd9%N_\xdf\xde^\x7f\x8c\xaf~\xba\x7f\x1f_\xbf\xfb\x01\xe6\x83WL\xa6'
Receive: 43 3483.330081 3483.329092 49: seq: 1c, identify_response offset=1720 data=b"\x01\xda\xb9J\xa5\x0e\x90)\xce\xcd'X\x85sK4@@_!uV\x8c\xbb\xcc\xe9+\xa2\x9a\xc08\xc3\x02\x16\x05\x1c\xb2\xce{\x7f"
Receive: 44 3483.332094 3483.331062 49: seq: 1d, identify_response offset=1760 data=b'}\x03\xbb^\xde\x7f\xfaH\x07\x01\x81\xdb\xcb\xd9\xe4\xe2\x97\xd9Y\xb0\xfc\x15\x06W8\x00\x0c\xe7\xd1\x16GQhF\xefp\x04\x151\x8f'
Receive: 45 3483.334093 3483.333071 49: seq: 1e, identify_response offset=1800 data=b'\xaeq\x04\xc9\x11\x8f\xbe\xc7\xd1\xda\xae\xf2\x03\x8e6v\x95\xf7\xb4f`\x97\xf9@\xc3\x90\xd6y5\xc1\xcb\\\x91\xbdt\xf6:\x00{('
Receive: 46 3483.336093 3483.335113 49: seq: 1f, identify_response offset=1840 data=b'\xe6\xa8\x17\x16DQD\xf7O\xf4b6_e\xa4\x816\x97\x8bY\x80\xfe\x12\x1a)\xbb\x14\xf9p@s\xa8\xad\x90\xbeBZ\xc0x '
Receive: 47 3483.338084 3483.337074 49: seq: 10, identify_response offset=1880 data=b'\xc7\x14\x94e<\x8eH\x81\xc6\x83Po\x98\xe8)\xc4\xa3\x06\xea\xb9XeF\x89\x82\x90b\xc7\x19*\xb7n.s\x04\xbc\x17ak\x9d'
Receive: 48 3483.340092 3483.339052 49: seq: 11, identify_response offset=1920 data=b'\x8c\xa3\xe76)EY\xb5\x02\x90O`\xf4\x10\x10\xf08\xca\t\x020\xf1tP\xf0\xcd@\xa4E\rP\n;q\x9a\x03\xb2\x7fm1'
Receive: 49 3483.342083 3483.341066 49: seq: 12, identify_response offset=1960 data=b'U\x82j|\x0f\xabB\x89\x9b\xb4Bi\x91\x98\xbd\xb8\xf7\xc05\x98a\xd6\xc8\x8a \xc6\x95"\xcfRVE9\'l\'Ka\xcbs'
Receive: 50 3483.344100 3483.343052 49: seq: 13, identify_response offset=2000 data=b"'\x0f\xaa\xd9\x9aD\xa7N\x1a\r$\xd94UCE\x98%4\x12\x92;\xddR\xeb\xf1\xfb\x04\x0e\x9d\x89\xb6\x12\x84\xfd\xd8J\xc2:\x95"
Receive: 51 3483.346133 3483.345252 49: seq: 14, identify_response offset=2040 data=b's\xa0\x0f\x9cy\nxD"=$e)s\xae\x88,\xc1\xf6\xec\xfa\x16"g\x86\x1c\xf4,\x97\xc9\xbc\xa8.\xec\xe7\x80\r\x8f\x98\x14'
Receive: 52 3483.349128 3483.348389 49: seq: 15, identify_response offset=2080 data=b'\x12\xd2Jn\x0fXbQ=J{J\x81\xfd\x1b\xc4\xee\x9e\xec\x9aR\xae\r\xc5\xdd\x81#\xba)\xab\xdc\xfe\x987[&P\xac`w'
Receive: 53 3483.351081 3483.350217 49: seq: 16, identify_response offset=2120 data=b"\xc4\x82\xdd\xceR\xf7\x88\xbcn\xee\xf1b\xbb\x88'\xd7\xc3I\x1bL0\x02y\xf3\xa6pH\x0f\xaa6{D\xde\xf1\x07\x85\x81\xc7\x83\xb1"
Receive: 54 3483.353082 3483.352107 49: seq: 17, identify_response offset=2160 data=b'\xee&yFo\\[\xcdr\xb7\xe7Fj\x9d\xec\xa5\x90e\n\xe9\x87\xb5(\xb8\xea\x8d\xd2\x1a\xac\xa7\xa1\xb2\xca\xba\x1c\x1b\x15 \x8c\xd9'
Receive: 55 3483.355081 3483.354068 49: seq: 18, identify_response offset=2200 data=b'\x9a0\x81\x90\xdc[>J4\t&jo\x0b\x1c\x92&#\x976\xdc\xd8\x99\xbdA;P! \xe0\xab\xd9\xe5\xd5\x13W\x12?\xc2;'
Receive: 56 3483.357082 3483.356104 49: seq: 19, identify_response offset=2240 data=b'H\x04_\x07\x1f\x11\x81\x12f\xe8>\x01\xbd\x86\x08\xd8u\xf4\t\xaa\xac9O\xe4\xdc\x95H%\x9e\xb4\x9f\x0e\t\xb9\xdd\xf3\xa8\x9bj\x0f'
Receive: 57 3483.359082 3483.358076 49: seq: 1a, identify_response offset=2280 data=b'\x9eR\xc0\xd1\x13\xbc\x1b\xa6\xc4pJ\xce\xb4\xb9\n\xff(\xcd\xa5\xd0\x9b\xe1}4\xb0\r\xaa\x1a|\x0c]\x1dS\xeb;\xc7p\xa4\x1d\xf1'
Receive: 58 3483.361079 3483.360112 49: seq: 1b, identify_response offset=2320 data=b'\xa4\xf2\x1c\xf2\x8f\x14\xd3x\xbf\xbd\xc8\x19U/\xe94\xf4\x05\t\xack\xef\xe0\x99\xb2\r\xe9\x00\xc8\xa1\x8a\xae\xb0s\xf6\x95`\xf0\xb0\xdd'
Receive: 59 3483.363081 3483.362060 49: seq: 1c, identify_response offset=2360 data=b'A\xeaS\xc0b\xf4\xb0\ti\xfc~\xfb\x9dy\xe9mU\x89]B\xb7\xe3\x9ba[\xe6\xdew)T\x190R\xd3\x94s\xb1{\xd2\x07'
Receive: 60 3483.365080 3483.364113 49: seq: 1d, identify_response offset=2400 data=b'JB\xea\xa5%\xa1\xe5\xa7Rw5\xa6_\x92_=\xfb78\x1b\xfdN\x01\xb5zW~\x865\x10\x1d\xb8\xfd\xed\xcd\xeb\x9e\x00\x17`'
Receive: 61 3483.367080 3483.366046 49: seq: 1e, identify_response offset=2440 data=b'g\x07\xf8\xd0UC\xaf\x16r8-R\xcd\xa6\xf4\xfa\x99\x0c^U\x99\x03\xde=\xc2\x02\xc9Cna\xcc\xdd\x94\xfb2\xc2\xa4\x96\\A'
Receive: 62 3483.369083 3483.368087 49: seq: 1f, identify_response offset=2480 data=b"\x8d\xfa;\x17\xe2'\x00R\x88\xad\x0f\x98\r\xee\xb0\xbf\xa7\xff\xc2\xfd;\xfai\xc5a\xaa\xf9\xc1%\xe3\xa6\x9d\xc6.\r \x98\xf1\x8e\x14"
Receive: 63 3483.371083 3483.370068 49: seq: 10, identify_response offset=2520 data=b'\xc8H\x9a\xbb\xec\x97\xe0\x84\xb4\x94CU&\xb9\x01|"\xafD\xd3\xb0#cs\xd6@/?\x13\xcc\xa6!\xd6\x1c501\xd8@\x16'
Receive: 64 3483.373079 3483.372121 49: seq: 11, identify_response offset=2560 data=b'\x12\x05\xeb\xc5\x82\xa2\x96\x19,)\xaa\xf1`\xb9 ;\xc3`\xb9\\\xc1w\xf4\xfaJUt\r0 \xf9\x17$\xd3\xca\xf1K\x03\x8d('
Receive: 65 3483.375211 3483.374052 49: seq: 12, identify_response offset=2600 data=b'Y\xa6r\xd40\x9a"\x9c\x9el\xfd\xf4\x05\xbfiS\xd8\xe4\x9b\x8b<\x7f9.=%I\xed\xd4\xae\xc2\xbf\xb9\xf2~\'\xc2jn\x8a'
Receive: 66 3483.383205 3483.382456 49: seq: 13, identify_response offset=2640 data=b'\xfe\xe7zH\x83\x96!/y\xaa\xc10\x8d\xbc\x1f\xb5\x06"\x89\xd7!\x12D1\x17\xa2_`\xa8\x91\xd0\xd7\x19k\xf7\x0b\x13\xc4R\xd3'
Receive: 67 3483.385170 3483.384539 49: seq: 14, identify_response offset=2680 data=b'n\xa4+RW\x12\xe7\xaccQy\x07\x18\xe6\x9f|C\rej<}\xe9\xd8F\xc2|\xc4\xfd\xeeS\x8cI\xb6\x15\xac\xe1\xb1\xb9\xce'
Receive: 68 3483.387186 3483.386391 49: seq: 15, identify_response offset=2720 data=b'\xee&\xec;\xa9\x83\x95\x0fU\x01\x98{\xbc\x87\xdf\xa8\x05\xf1y\xdf\x9c\x8c\xad\x07\xf4u\x0f\x8f\xad\x9d\x17}\x03\xd2\xe3\x1d\xb5\t\xce\x91'
Receive: 69 3483.389170 3483.388487 49: seq: 16, identify_response offset=2760 data=b'\x17\xb3\xcd^#b\x9c\x10\xb1R\xd6\xb0\x9e\xed\x8d\xfd\x19?\xc3\xea\xf1d/\xed\xff\xf2\xb3\xee\x84\x9f!\x0e\xbb\x86\xa9Q\xb8=\\\x97'
Receive: 70 3483.391193 3483.390452 49: seq: 17, identify_response offset=2800 data=b"\xa6\xf4\x13W\x8a|p\x03\xd0\x82\xdf\xb3\xdf\x04o\xf4\x8e\x8e\xb4\xeb\xbf\xa0\xcd\x91\xd0\x98\x9b\x02\xb1)F\xb9\xe13\rW'zN_"
Receive: 71 3483.393178 3483.392484 49: seq: 18, identify_response offset=2840 data=b'\x12\x1cZ\xf3\xb8_\xf4\xb6\xac)\xd0iW\xb0\x82\xee\xe3\x88\xed\xdf\x9e\xb6\xf0\xd2\xcf\xc8\xff\x14\x96\xcc|\t\xafE\xe0\x0b _p\xaa'
Receive: 72 3483.395088 3483.394298 49: seq: 19, identify_response offset=2880 data=b'\xb1st\x01\xbf\t:\xb8|8\xec\xa4\xfc\x91\xebc\x98\xa5\xf6\x02\xa5\xd9\xeb9\xe7\xf8\xba\x7f\xb0\xba+\xcc\x1f\xfd\x1b\xe3\xc5\xaao\x8e'
Receive: 73 3483.397080 3483.396126 49: seq: 1a, identify_response offset=2920 data=b"\x8c:'\xdctW\xe0+\xd1\x08\xbf\x87\xaev\x12\xd2:\x0e\xb6\xec\x7f\x18\x87l?\xe5\xf8\x06\xe8'\xfcp\x96~\x8f\xa4\x87\x884q"
Receive: 74 3483.399081 3483.398112 49: seq: 1b, identify_response offset=2960 data=b'\r\x9b\x93\xbf\xd3x\xf0\x87]\x0b\xfeQE\xf0\x8f\x96\x9d\x8f\x8d\x18\x88\xcc\x7f\xff\x005\xec\xe3\xec<\x08\xceg\xd3 \x0c\xa7{\xb9\x94'
Receive: 75 3483.401079 3483.400108 21: seq: 1c, identify_response offset=3000 data=b"\xbb\xf9:\xcd&\xaf\xff\x05'\xf9\xf4\x16"
Receive: 76 3483.403136 3483.402139 9: seq: 1d, identify_response offset=3012 data=b''
Receive: 77 3483.423199 3483.421895 12: seq: 1e, uptime high=0 clock=633173239
Receive: 78 3483.477180 3483.475808 11: seq: 1f, clock clock=642225804
Receive: 79 3483.531252 3483.530104 11: seq: 10, clock clock=651350904
Receive: 80 3483.585118 3483.584297 11: seq: 11, clock clock=660451067
Receive: 81 3483.638124 3483.637134 11: seq: 12, clock clock=669329126
Receive: 82 3483.690114 3483.689527 11: seq: 13, clock clock=678129427
Receive: 83 3483.742117 3483.741436 11: seq: 14, clock clock=686850032
Receive: 84 3483.794115 3483.793569 11: seq: 15, clock clock=695609176
Receive: 85 3483.846116 3483.845627 11: seq: 16, clock clock=704352965
Receive: 86 3483.852127 3483.850969 11: seq: 17, clock clock=705250071
Receive: 87 3484.466137 3484.465634 8: seq: 18, debug_result val=964
Receive: 88 3484.468110 3484.467575 8: seq: 19, debug_result val=1212
Receive: 89 3484.470100 3484.469669 10: seq: 1a, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 90 3484.484072 3484.482949 15: seq: 13, config is_config=1 crc=2148372726 is_shutdown=0 move_count=1024
Receive: 91 3484.515104 3484.513826 12: seq: 14, shutdown clock=816609936 static_string_id=Command request
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472769420160: Disconnected
Restarting printer
Start printer at Fri May 19 15:15:19 2023 (1684509319.7 3515.1)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host: PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472796640496: New connection
webhooks client 281472796640496: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472796640496: Disconnected
Restarting printer
Start printer at Fri May 19 15:17:51 2023 (1684509471.1 3666.5)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host: PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38
enable_pin = PG19

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472796597984: New connection
webhooks client 281472796597984: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 281472796597984: Disconnected
Restarting printer
Start printer at Fri May 19 15:18:47 2023 (1684509527.6 3723.0)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu raspberry_pi]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = raspberry_pi:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472769429360: New connection
webhooks client 281472769429360: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'raspberry_pi': Starting connect
Loaded MCU 'raspberry_pi' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'raspberry_pi' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'raspberry_pi' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'raspberry_pi'
Attempting MCU 'mcu' reset command
b'Got EOF when reading from device'
Attempting MCU 'raspberry_pi' config_reset command
b'Got EOF when reading from device'
webhooks client 281472769429360: Disconnected
Restarting printer
Start printer at Fri May 19 15:25:38 2023 (1684509939.0 4134.4)
===== Config file =====
[stepper_x]
step_pin = PD5
dir_pin = !PD4
enable_pin = !PD7
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PD6
run_current = 0.580
stealthchop_threshold = 999999

[stepper_y]
step_pin = PD0
dir_pin = !PA15
enable_pin = !PD3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PD1
run_current = 0.580
stealthchop_threshold = 999999

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PD14
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PD15
run_current = 0.580
stealthchop_threshold = 999999

[extruder]
step_pin = PD12
dir_pin = !PD13
enable_pin = !PD10
microsteps = 16
rotation_distance = 27.540162936
nozzle_diameter = 0.300
filament_diameter = 1.750
heater_pin = PB3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 30.757
pid_ki = 1.972
pid_kd = 119.951

[tmc2209 extruder]
uart_pin = PD11
run_current = 0.650
stealthchop_threshold = 999999

[heater_bed]
heater_pin = PB4
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 73.629
pid_ki = 1.670
pid_kd = 811.758

[heater_fan heatbreak_cooling_fan]
pin = PB6

[fan]
pin = PB5

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f407xx_3D001C000147393530343239-if00

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
	EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[bed_screws]
screw1 = 31,37
screw1_name = Front left screw
screw2 = 31,208
screw2_name = Rear left screw
screw3 = 201,208
screw3_name = Rear right screw
screw4 = 201,37
screw4_name = Front right screw
screw5 = 154,128
screw5_name = Right wedge
screw6 = 76,120
screw6_name = Left wedge

[duplicate_pin_override]
pins = PB6

[temperature_fan raspberry_pi]
pin = host:PG19
kick_start_time = 0.8
off_below = 0.1
max_power = 1.0
sensor_type = temperature_host
control = pid
min_temp = -40
max_temp = 85
pid_kp = 1.0
pid_ki = 0.5
pid_kd = 2.0
min_speed = 0.1
max_speed = 0.6
target_temp = 38

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"
	
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	M109 S{last_extruder_temp}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
=======================
Extruder max_extrude_ratio=0.149671
mcu 'mcu': Starting serial connect
webhooks client 281472796070960: New connection
webhooks client 281472796070960: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'mcu' 117 commands (v0.11.0-122-ge6ef48cd / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 CLOCK_FREQ=168000000 MCU=stm32f407xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 111 commands (v0.11.0-200-g7511151a / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-280.967742 slope=1320.967742
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/mcu.py", line 707, in _send_config
    self._serial.send(c)
  File "/home/biqu/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/biqu/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/biqu/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/biqu/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'PG19' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/biqu/klipper/klippy/mcu.py", line 753, in _connect
    self._send_config(None)
  File "/home/biqu/klipper/klippy/mcu.py", line 718, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'PG19' is not a valid pin name on mcu 'host'