===== Config file =====
[gcode_macro M600]
gcode = 
	{% set X = params.X|default(50)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	SAVE_GCODE_STATE NAME=M600_state
	PAUSE
	G91
	G1 E-.8 F2700
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F3000
	G91
	G1 E-50 F1000
	RESTORE_GCODE_STATE NAME=M600_state

[gcode_macro Wartungsposition]
gcode = 
	
	G90
	
	G1 X125 Y125 Z80 F3000
	
	G91
	
	M140 S0
	M104 S0
	M106 S0
	
	M84

[gcode_macro _CG28]
description = Helper: Conditional homing
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	SET_LED_EFFECT EFFECT=homing REPLACE=1
	G28
	{% endif %}

[gcode_macro _CG34]
gcode = 
	{% if printer['z_tilt'].applied == false %}
	SET_LED_EFFECT EFFECT=calibrating_z REPLACE=1
	Z_TILT_ADJUST
	SET_LED_EFFECT EFFECT=homing REPLACE=1
	G28 Z
	{% endif %}

[gcode_macro  AUTO_OFF_ENABLE]
gcode = 
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE=1

[gcode_macro  AUTO_OFF_DISABLE]
gcode = 
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE=0

[delayed_gcode _AUTO_OFF_SEQUENCE]
initial_duration = 0
gcode = 
	
	{% set autoOffEnabled = printer['gcode_macro _USER_VARIABLE'].auto_off_enable %}
	{% set bedTemp = printer['heater_bed'].temperature %}
	{% set hotendTemp = printer['extruder'].temperature %}
	{% set shutdown = 0 %}
	
	{% if autoOffEnabled == 0 %}
	{action_respond_info("Auto off aborted")}
	{% else %}
	{action_respond_info("Auto off check")}
	{% if printer.idle_timeout.state == "Idle" %}
	{% if bedTemp < 40 %}
	{% if hotendTemp < 40 %}
	{% set shutdown = 1 %}
	{% endif %}
	{% endif %}
	{% endif %}
	
	
	{% if shutdown == 1 %}
	POWER_OFF_PRINTER
	{% else %}
	UPDATE_DELAYED_GCODE ID=_AUTO_OFF_SEQUENCE DURATION=5
	{% endif %}
	{% endif %}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="printer",
	state="off")}

[gcode_macro _CALIBRATE_START]
gcode = 
	{% set extruder_temp = params.EXTRUDER_TEMP|float %}
	{% set bed_temp = params.BED_TEMP|float %}
	
	START_PRINT EXTRUDER={extruder_temp} BED={bed_temp}

[gcode_macro _CALIBRATE_END]
gcode = 
	
	
	G91
	G1 E-1 F3000
	G1 X-0.5 Y-0.5 Z5 E-5
	G90
	G1 X0 Y150 F2200
	M107
	
	G90

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set extruder_temp = params.EXTRUDER_TEMP|default(235)|float %}
	{% set bed_temp = params.BED_TEMP|default(75)|float %}
	{% set pa_start     = params.START|default(0)|float %}
	{% set pa_increment = params.INCREMENT|default(0.05)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	_CALIBRATE_START EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: BED_TEMP:%.0f" % bed_temp)}
	{action_respond_info("Parameter: EXTRUDER_TEMP:%.0f" % extruder_temp)}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	_CALIBRATE_END

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	{% set extruder_temp = params.EXTRUDER_TEMP|default(235)|float %}
	{% set bed_temp = params.BED_TEMP|default(75)|float %}
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(1)|int %}
	{% set fan_speed = params.FAN_SPEED|default(30)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.6)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(0)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Kalibrierungsdruck fuer den Extrusionsfluss wird gestartet")}
	{action_respond_info("")}
	{action_respond_info("Parameter: BED_TEMP:%.0f" % bed_temp)}
	{action_respond_info("Parameter: EXTRUDER_TEMP:%.0f" % extruder_temp)}
	{action_respond_info("Parameter: Aktiviere_Retract:%.0f" % do_retract)}
	{action_respond_info("Parameter: Druckgroesse:%.0f" % print_size)}
	{action_respond_info("Parameter: Druckobjekthoehe:%.0f" % print_height)}
	{action_respond_info("Parameter: Eckradius:%.0f" % corner_radius)}
	{action_respond_info("Parameter: Anzahl_Waende:%.0f" % number_of_perimeters)}
	{action_respond_info("Parameter: Lueftergeschwindigkeit:%.0f" % fan_speed)}
	{action_respond_info("Parameter: Extrusionsfaktor:%.4f" % e_multiplier)}
	{action_respond_info("Parameter: Filamentdurchmesser:%.2f" % filament_diameter)}
	{action_respond_info("Parameter: Extrusionsbreite:%.4f" % extrusion_width)}
	{action_respond_info("Parameter: Layerhoehe:%.2f" % layer_height)}
	{action_respond_info("Parameter: Retract_Laenge:%.0f" % retract_length)}
	{action_respond_info("Parameter: Purgewert:%.0f" % initial_purge)}
	{action_respond_info("Parameter: Druckgeschwindigkeit:%.0f" % (feedrate_print / 60))}
	{action_respond_info("Parameter: Speed_Z:%.0f" % (feedrate_z / 60))}
	{action_respond_info("Parameter: Speed_Rectract:%.0f" % (feedrate_retract / 60))}
	{action_respond_info("Parameter: Speed_Travel:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: Speed_Raft:%.0f" % (feedrate_raft / 60))}
	
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die -Not-Aus-Taste, um den Vorgang bei Bedarf zu stoppen.")}
	{action_respond_info("")}
	{action_respond_info("Verwendeter Extrusionsmultiplikator: %.4f" % e_multiplier)}
	{action_respond_info("Anzahl der zu druckenden Umfaenge: %d" % number_of_perimeters)}
	{action_respond_info("THEORETHISCHE SCHALENDICKE: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Messen Sie die Schalendicke mit einer Schieblehre oder einem Mikrometer. Rufen Sie dann das Berechnungsmakro mit dem gemessenen Wert auf:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	_CALIBRATE_START EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	_CALIBRATE_END

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[gcode_arcs]
resolution = 0.1

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Run standard input shaper test for all axes
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	{% set axes = params.AXES|default("x,y,xy")|string|lower %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	
	{% if axes=="xy" %}
	TEST_RESONANCES AXIS=X
	M400
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% elif axes=="y" %}
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% elif axes=="x" %}
	TEST_RESONANCES AXIS=X
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% else %}
	{action_respond_info("Please choose the axis: x, y or xy")}
	{% endif %}

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Run custom demi-axe test to analyze belts on CoreXY printers
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified input shaper excitating frequency for some time to diagnose vibrations
gcode = 
	{% set FREQUENCY = params.FREQUENCY|default(25)|int %}
	{% set TIME = params.TIME|default(10)|int %}
	{% set AXIS = params.AXIS|default("x")|string|lower %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={AXIS} FREQ_START={FREQUENCY-1} FREQ_END={FREQUENCY+1} HZ_PER_SEC={1/(TIME/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	
	
	
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set verbose = params.VERBOSE|default(true) %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|int * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|int * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	
	
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	}
	}
	%}
	
	
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y or Z is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	G1 Z{z_height}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_speed in range(min_speed, max_speed + speed_increment) %}
	{% if (curr_speed - min_speed) % speed_increment == 0 %}
	{% if verbose %}
	RESPOND MSG="Current speed: {(curr_speed / 60)|int} mm/s"
	{% endif %}
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{(curr_speed / 60)|int}n1
	
	G4 P300
	M400
	{% endif %}
	{% endfor %}
	
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS="VIBRATIONS {direction}"
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command plot_graph]
command = bash /home/pi/printer_data/config/scripts/plot_graphs.sh
timeout = 500.0
verbose = True

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	M300
	G91
	G92 E0
	G1 E350 F{max_velocity}
	G1 E25 F{speed}
	M300
	M300
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	M300
	G92 E0
	G1 E25 F{speed}
	G1 E-420 F{max_velocity}
	M300
	M300
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro START_PRINT]
gcode = 
	{% set extruder = params.EXTRUDER|default(0) %}
	{% set bed = params.BED|default(0) %}
	
	M83
	SET_LED_EFFECT EFFECT=heating REPLACE=1
	M190 S{bed}
	M109 S{extruder}
	_CG28
	_CG34
	SET_LED_EFFECT EFFECT=meshing REPLACE=1
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE
	SET_LED_EFFECT EFFECT=cleaning REPLACE=1
	LINE_PURGE
	SET_LED_EFFECT EFFECT=progress_bar REPLACE=1

[gcode_macro END_PRINT]
gcode = 
	SET_LED_EFFECT EFFECT=progress_bar STOP=1
	TURN_OFF_HEATERS
	G91
	G1 E-1 F3000
	G1 X-0.5 Y-0.5 Z5 E-5
	G90
	G1 X0 Y200 F2200
	M107
	M84
	G90
	AUTO_OFF_ENABLE

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	
	{% set z = params.Z|default(10)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}
	
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SAVE_GCODE_STATE NAME=PAUSE
	BASE_PAUSE
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}
	G91
	G1 Z{z} F900
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000
	SAVE_GCODE_STATE NAME=PAUSEPARK
	M104 S0
	SET_IDLE_TIMEOUT TIMEOUT=43200
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	
	{% set e = params.E|default(2.5)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	{% if etemp > 0 %}
	M109 S{etemp|int}
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100
	G91
	M83
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900
	{% else %}
	G1 Z{zhop * -1} F900
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60
	BASE_RESUME
	{% endif %}

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	END_PRINT
	BASE_CANCEL_PRINT
	SET_LED_EFFECT EFFECT=progress_bar STOP=1

[gcode_macro _USER_VARIABLE]
variable_auto_off_enable = 0
variable_fan_speed_nevermore = 0
variable_fan_target_chamber = 0
variable_pause_retract = 1.0
variable_time_of_print = 0
variable_extra_gcode_offset = -0.00
variable_probe_position_after_dock = {'x': 0, 'y': 0}
variable_probe_position_after_undock = {'x': 0, 'y': 0}
variable_probe_dock_position = {'x': 99, 'y': 44}
variable_probe_z_min = 25
variable_probe_travel_speed = 100
gcode = 
	
	{% set savedVars = printer.save_variables.variables %}
	{% set user_auto_off_enable = savedVars.autooffenable|default(0) %}
	{% set user_auto_off_enable = savedVars.extragcodeoffset|default(-0.06)|float %}
	
	
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE={user_auto_off_enable}

[gcode_macro _USER_VARIABLE_STORE]
gcode = 
	{% set extraGcodeOffset = printer['gcode_macro _USER_VARIABLE'].extra_gcode_offset %}
	{% set autoOffEnable = printer['gcode_macro _USER_VARIABLE'].auto_off_enable %}
	SAVE_VARIABLE VARIABLE=extraGcodeOffset VALUE={extraGcodeOffset}
	SAVE_VARIABLE VARIABLE=autoOffEnable VALUE={autoOffEnable}

[led_effect cleaning]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.02, 0.5)

[led_effect calibrating_z]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.0, 0.35)

[led_effect heating]
leds = 
	neopixel:Neopixel (1,3,7,8,6,2)
autostart = false
frame_rate = 60
layers = 
	comet  0.3  0 add (1, 0.18, 0)

[led_effect homing]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.6, 0.2)

[led_effect meshing]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.2, 1.0, 0.0)

[led_effect progress_bar]
leds = 
	neopixel:Neopixel
autostart = false
frame_rate = 60
layers = 
	progress  -1  0 add         ( 0, 0,1),( 0, 0.1, 0.6)
	static     0  0 top         ( 0, 0, 0.1)

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set probe_dock_enable = printer["gcode_macro _KAMP_Settings"].probe_dock_enable | abs %}
	{% set attach_macro = printer["gcode_macro _KAMP_Settings"].attach_macro | string %}
	{% set detach_macro = printer["gcode_macro _KAMP_Settings"].detach_macro | string %}
	{% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}
	{% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 8
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 30
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[exclude_object]

[force_move]
enable_force_move = True

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[printer]
kinematics = limited_cartesian
max_velocity = 361
max_x_velocity = 300
max_y_velocity = 300
max_accel = 5220
max_accel_to_decel = 5220
max_x_accel = 5000
max_y_accel = 1500
scale_xy_accel = true
max_z_velocity = 12
max_z_accel = 60

[stepper_x]
step_pin = PD4
dir_pin = PD3
enable_pin = !PD6
microsteps = 32
rotation_distance = 40
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
homing_retract_dist = 0
position_max = 310
homing_speed = 60

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
microsteps = 32
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
homing_retract_dist = 0
position_max = 320
homing_speed = 60

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 250
position_min = -2
homing_speed = 12

[stepper_z1]
step_pin = PD11
dir_pin = !PD10
enable_pin = !PD13
microsteps = 32
rotation_distance = 4

[extruder]
step_pin = PD15
dir_pin = PD14
enable_pin = !PC7
microsteps = 16
rotation_distance = 7.861
nozzle_diameter = 0.600
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104GT-2
sensor_pin = PA3
min_temp = 0
max_temp = 300
max_extrude_cross_section = 5
control = pid
pid_kp = 34.054
pid_ki = 1.261
pid_kd = 229.864

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 200
control = pid
pid_kp = 71.913
pid_ki = 1.386
pid_kd = 933.070

[fan]
pin = PB7

[heater_fan hotend_fan]
pin = PB6

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00

[tmc2209 stepper_x]
uart_pin = PD5
run_current = 1.000
stealthchop_threshold = 999999
diag_pin = ^PC1
driver_sgthrs = 90

[tmc2209 stepper_y]
uart_pin = PB1
run_current = 1.000
stealthchop_threshold = 999999
diag_pin = ^PC3
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PE9
run_current = 1.000
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = PE10
run_current = 1.000
stealthchop_threshold = 999999

[input_shaper]
shaper_freq_x = 53.2
shaper_type_x = mzv
shaper_freq_y = 50.0
shaper_type_y = mzv

[bltouch]
sensor_pin = ^PC13
control_pin = PE5
x_offset = 29
y_offset = -15
stow_on_each_sample = false
probe_with_touch_mode = true
z_offset = 1.605

[bed_mesh]
speed = 300
horizontal_move_z = 5
mesh_min = 35, 30
mesh_max = 280,280
probe_count = 5, 5

[z_tilt]
z_positions = 
	380, 150
	-70, 150
points = 
	0, 150
	270, 150
speed = 300
horizontal_move_z = 5
retries = 10
retry_tolerance = 0.015

[safe_z_home]
home_xy_position = 150, 150
speed = 300
z_hop = 12

[neopixel Neopixel]
pin = PE6
color_order = GRB
chain_count = 76

[temperature_sensor mainboard]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[temperature_sensor pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 100
=======================
Loaded MCU 'mcu' 112 commands (v0.11.0-295-g83ef0e13 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-295-g83ef0e13-dirty'
Untracked files: klippy/extras/gcode_shell_command.py, klippy/extras/led_effect.py, klippy/kinematics/limited_cartesian.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
webhooks client 547726712448: {'program': 'Moonraker', 'version': 'v0.8.0-182-g9785387'}
=============== Log rollover at Tue Oct 10 06:03:06 2023 ===============
Stats 2728836.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=266524 bytes_read=7144172 bytes_retransmit=9 bytes_invalid=0 send_seq=44158 receive_seq=44158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006811  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.3 pi: temp=51.6 sysload=0.32 cputime=688.591 memavail=3333772 print_time=43268.091 buffer_time=0.523 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 547726712448: Disconnected
Restarting printer
Start printer at Tue Oct 10 06:03:08 2023 (1696910588.2 2728838.0)
===== Config file =====
[gcode_macro M600]
gcode = 
	{% set X = params.X|default(50)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	SAVE_GCODE_STATE NAME=M600_state
	PAUSE
	G91
	G1 E-.8 F2700
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F3000
	G91
	G1 E-50 F1000
	RESTORE_GCODE_STATE NAME=M600_state

[gcode_macro Wartungsposition]
gcode = 
	
	G90
	
	G1 X125 Y125 Z80 F3000
	
	G91
	
	M140 S0
	M104 S0
	M106 S0
	
	M84

[gcode_macro _CG28]
description = Helper: Conditional homing
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	SET_LED_EFFECT EFFECT=homing REPLACE=1
	G28
	{% endif %}

[gcode_macro _CG34]
gcode = 
	{% if printer['z_tilt'].applied == false %}
	SET_LED_EFFECT EFFECT=calibrating_z REPLACE=1
	Z_TILT_ADJUST
	SET_LED_EFFECT EFFECT=homing REPLACE=1
	G28 Z
	{% endif %}

[gcode_macro  AUTO_OFF_ENABLE]
gcode = 
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE=1

[gcode_macro  AUTO_OFF_DISABLE]
gcode = 
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE=0

[delayed_gcode _AUTO_OFF_SEQUENCE]
initial_duration = 0
gcode = 
	
	{% set autoOffEnabled = printer['gcode_macro _USER_VARIABLE'].auto_off_enable %}
	{% set bedTemp = printer['heater_bed'].temperature %}
	{% set hotendTemp = printer['extruder'].temperature %}
	{% set shutdown = 0 %}
	
	{% if autoOffEnabled == 0 %}
	{action_respond_info("Auto off aborted")}
	{% else %}
	{action_respond_info("Auto off check")}
	{% if printer.idle_timeout.state == "Idle" %}
	{% if bedTemp < 40 %}
	{% if hotendTemp < 40 %}
	{% set shutdown = 1 %}
	{% endif %}
	{% endif %}
	{% endif %}
	
	
	{% if shutdown == 1 %}
	POWER_OFF_PRINTER
	{% else %}
	UPDATE_DELAYED_GCODE ID=_AUTO_OFF_SEQUENCE DURATION=5
	{% endif %}
	{% endif %}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="printer",
	state="off")}

[gcode_macro _CALIBRATE_START]
gcode = 
	{% set extruder_temp = params.EXTRUDER_TEMP|float %}
	{% set bed_temp = params.BED_TEMP|float %}
	
	START_PRINT EXTRUDER={extruder_temp} BED={bed_temp}

[gcode_macro _CALIBRATE_END]
gcode = 
	
	
	G91
	G1 E-1 F3000
	G1 X-0.5 Y-0.5 Z5 E-5
	G90
	G1 X0 Y150 F2200
	M107
	
	G90

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set extruder_temp = params.EXTRUDER_TEMP|default(235)|float %}
	{% set bed_temp = params.BED_TEMP|default(75)|float %}
	{% set pa_start     = params.START|default(0)|float %}
	{% set pa_increment = params.INCREMENT|default(0.05)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	_CALIBRATE_START EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: BED_TEMP:%.0f" % bed_temp)}
	{action_respond_info("Parameter: EXTRUDER_TEMP:%.0f" % extruder_temp)}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	_CALIBRATE_END

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	{% set extruder_temp = params.EXTRUDER_TEMP|default(235)|float %}
	{% set bed_temp = params.BED_TEMP|default(75)|float %}
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(1)|int %}
	{% set fan_speed = params.FAN_SPEED|default(30)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.6)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(0)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Kalibrierungsdruck fuer den Extrusionsfluss wird gestartet")}
	{action_respond_info("")}
	{action_respond_info("Parameter: BED_TEMP:%.0f" % bed_temp)}
	{action_respond_info("Parameter: EXTRUDER_TEMP:%.0f" % extruder_temp)}
	{action_respond_info("Parameter: Aktiviere_Retract:%.0f" % do_retract)}
	{action_respond_info("Parameter: Druckgroesse:%.0f" % print_size)}
	{action_respond_info("Parameter: Druckobjekthoehe:%.0f" % print_height)}
	{action_respond_info("Parameter: Eckradius:%.0f" % corner_radius)}
	{action_respond_info("Parameter: Anzahl_Waende:%.0f" % number_of_perimeters)}
	{action_respond_info("Parameter: Lueftergeschwindigkeit:%.0f" % fan_speed)}
	{action_respond_info("Parameter: Extrusionsfaktor:%.4f" % e_multiplier)}
	{action_respond_info("Parameter: Filamentdurchmesser:%.2f" % filament_diameter)}
	{action_respond_info("Parameter: Extrusionsbreite:%.4f" % extrusion_width)}
	{action_respond_info("Parameter: Layerhoehe:%.2f" % layer_height)}
	{action_respond_info("Parameter: Retract_Laenge:%.0f" % retract_length)}
	{action_respond_info("Parameter: Purgewert:%.0f" % initial_purge)}
	{action_respond_info("Parameter: Druckgeschwindigkeit:%.0f" % (feedrate_print / 60))}
	{action_respond_info("Parameter: Speed_Z:%.0f" % (feedrate_z / 60))}
	{action_respond_info("Parameter: Speed_Rectract:%.0f" % (feedrate_retract / 60))}
	{action_respond_info("Parameter: Speed_Travel:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: Speed_Raft:%.0f" % (feedrate_raft / 60))}
	
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die -Not-Aus-Taste, um den Vorgang bei Bedarf zu stoppen.")}
	{action_respond_info("")}
	{action_respond_info("Verwendeter Extrusionsmultiplikator: %.4f" % e_multiplier)}
	{action_respond_info("Anzahl der zu druckenden Umfaenge: %d" % number_of_perimeters)}
	{action_respond_info("THEORETHISCHE SCHALENDICKE: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Messen Sie die Schalendicke mit einer Schieblehre oder einem Mikrometer. Rufen Sie dann das Berechnungsmakro mit dem gemessenen Wert auf:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	_CALIBRATE_START EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	_CALIBRATE_END

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[gcode_arcs]
resolution = 0.1

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Run standard input shaper test for all axes
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	{% set axes = params.AXES|default("x,y,xy")|string|lower %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	
	{% if axes=="xy" %}
	TEST_RESONANCES AXIS=X
	M400
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% elif axes=="y" %}
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% elif axes=="x" %}
	TEST_RESONANCES AXIS=X
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% else %}
	{action_respond_info("Please choose the axis: x, y or xy")}
	{% endif %}

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Run custom demi-axe test to analyze belts on CoreXY printers
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified input shaper excitating frequency for some time to diagnose vibrations
gcode = 
	{% set FREQUENCY = params.FREQUENCY|default(25)|int %}
	{% set TIME = params.TIME|default(10)|int %}
	{% set AXIS = params.AXIS|default("x")|string|lower %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={AXIS} FREQ_START={FREQUENCY-1} FREQ_END={FREQUENCY+1} HZ_PER_SEC={1/(TIME/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	
	
	
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set verbose = params.VERBOSE|default(true) %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|int * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|int * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	
	
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	}
	}
	%}
	
	
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y or Z is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	G1 Z{z_height}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_speed in range(min_speed, max_speed + speed_increment) %}
	{% if (curr_speed - min_speed) % speed_increment == 0 %}
	{% if verbose %}
	RESPOND MSG="Current speed: {(curr_speed / 60)|int} mm/s"
	{% endif %}
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{(curr_speed / 60)|int}n1
	
	G4 P300
	M400
	{% endif %}
	{% endfor %}
	
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS="VIBRATIONS {direction}"
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command plot_graph]
command = bash /home/pi/printer_data/config/scripts/plot_graphs.sh
timeout = 500.0
verbose = True

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	M300
	G91
	G92 E0
	G1 E350 F{max_velocity}
	G1 E25 F{speed}
	M300
	M300
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	M300
	G92 E0
	G1 E25 F{speed}
	G1 E-420 F{max_velocity}
	M300
	M300
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro START_PRINT]
gcode = 
	{% set extruder = params.EXTRUDER|default(0) %}
	{% set bed = params.BED|default(0) %}
	
	M83
	SET_LED_EFFECT EFFECT=heating REPLACE=1
	M190 S{bed}
	M109 S{extruder}
	_CG28
	_CG34
	SET_LED_EFFECT EFFECT=meshing REPLACE=1
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE
	SET_LED_EFFECT EFFECT=cleaning REPLACE=1
	LINE_PURGE
	SET_LED_EFFECT EFFECT=progress_bar REPLACE=1

[gcode_macro END_PRINT]
gcode = 
	SET_LED_EFFECT EFFECT=progress_bar STOP=1
	TURN_OFF_HEATERS
	G91
	G1 E-1 F3000
	G1 X-0.5 Y-0.5 Z5 E-5
	G90
	G1 X0 Y200 F2200
	M107
	M84
	G90
	AUTO_OFF_ENABLE

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	
	{% set z = params.Z|default(10)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}
	
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SAVE_GCODE_STATE NAME=PAUSE
	BASE_PAUSE
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}
	G91
	G1 Z{z} F900
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000
	SAVE_GCODE_STATE NAME=PAUSEPARK
	M104 S0
	SET_IDLE_TIMEOUT TIMEOUT=43200
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	
	{% set e = params.E|default(2.5)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	{% if etemp > 0 %}
	M109 S{etemp|int}
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100
	G91
	M83
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900
	{% else %}
	G1 Z{zhop * -1} F900
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60
	BASE_RESUME
	{% endif %}

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	END_PRINT
	BASE_CANCEL_PRINT
	SET_LED_EFFECT EFFECT=progress_bar STOP=1

[gcode_macro _USER_VARIABLE]
variable_auto_off_enable = 0
variable_fan_speed_nevermore = 0
variable_fan_target_chamber = 0
variable_pause_retract = 1.0
variable_time_of_print = 0
variable_extra_gcode_offset = -0.00
variable_probe_position_after_dock = {'x': 0, 'y': 0}
variable_probe_position_after_undock = {'x': 0, 'y': 0}
variable_probe_dock_position = {'x': 99, 'y': 44}
variable_probe_z_min = 25
variable_probe_travel_speed = 100
gcode = 
	
	{% set savedVars = printer.save_variables.variables %}
	{% set user_auto_off_enable = savedVars.autooffenable|default(0) %}
	{% set user_auto_off_enable = savedVars.extragcodeoffset|default(-0.06)|float %}
	
	
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE={user_auto_off_enable}

[gcode_macro _USER_VARIABLE_STORE]
gcode = 
	{% set extraGcodeOffset = printer['gcode_macro _USER_VARIABLE'].extra_gcode_offset %}
	{% set autoOffEnable = printer['gcode_macro _USER_VARIABLE'].auto_off_enable %}
	SAVE_VARIABLE VARIABLE=extraGcodeOffset VALUE={extraGcodeOffset}
	SAVE_VARIABLE VARIABLE=autoOffEnable VALUE={autoOffEnable}

[led_effect cleaning]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.02, 0.5)

[led_effect calibrating_z]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.0, 0.35)

[led_effect heating]
leds = 
	neopixel:Neopixel (1,3,7,8,6,2)
autostart = false
frame_rate = 60
layers = 
	comet  0.3  0 add (1, 0.18, 0)

[led_effect homing]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.6, 0.2)

[led_effect meshing]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.2, 1.0, 0.0)

[led_effect progress_bar]
leds = 
	neopixel:Neopixel
autostart = false
frame_rate = 60
layers = 
	progress  -1  0 add         ( 0, 0,1),( 0, 0.1, 0.6)
	static     0  0 top         ( 0, 0, 0.1)

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set probe_dock_enable = printer["gcode_macro _KAMP_Settings"].probe_dock_enable | abs %}
	{% set attach_macro = printer["gcode_macro _KAMP_Settings"].attach_macro | string %}
	{% set detach_macro = printer["gcode_macro _KAMP_Settings"].detach_macro | string %}
	{% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}
	{% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 8
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 30
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[exclude_object]

[force_move]
enable_force_move = True

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[printer]
kinematics = limited_cartesian
max_velocity = 361
max_x_velocity = 300
max_y_velocity = 300
max_accel = 5220
max_accel_to_decel = 5220
max_x_accel = 5000
max_y_accel = 1500
scale_xy_accel = true
max_z_velocity = 12
max_z_accel = 60

[stepper_x]
step_pin = PD4
dir_pin = PD3
enable_pin = !PD6
microsteps = 32
rotation_distance = 40
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
homing_retract_dist = 0
position_max = 310
homing_speed = 60

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
microsteps = 32
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
homing_retract_dist = 0
position_max = 320
homing_speed = 60

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 250
position_min = -2
homing_speed = 12

[stepper_z1]
step_pin = PD11
dir_pin = !PD10
enable_pin = !PD13
microsteps = 32
rotation_distance = 4

[extruder]
step_pin = PD15
dir_pin = PD14
enable_pin = !PC7
microsteps = 16
rotation_distance = 7.861
nozzle_diameter = 0.600
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104GT-2
sensor_pin = PA3
min_temp = 0
max_temp = 300
max_extrude_cross_section = 5
control = pid
pid_kp = 34.054
pid_ki = 1.261
pid_kd = 229.864

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 200
control = pid
pid_kp = 71.913
pid_ki = 1.386
pid_kd = 933.070

[fan]
pin = PB7

[heater_fan hotend_fan]
pin = PB6

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00

[tmc2209 stepper_x]
uart_pin = PD5
run_current = 1.000
stealthchop_threshold = 999999
diag_pin = ^PC1
driver_sgthrs = 90

[tmc2209 stepper_y]
uart_pin = PB1
run_current = 1.000
stealthchop_threshold = 999999
diag_pin = ^PC3
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PE9
run_current = 1.000
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = PE10
run_current = 1.000
stealthchop_threshold = 999999

[input_shaper]
shaper_freq_x = 53.2
shaper_type_x = mzv
shaper_freq_y = 50.0
shaper_type_y = mzv

[bltouch]
sensor_pin = ^PC13
control_pin = PE5
x_offset = 29
y_offset = -15
stow_on_each_sample = false
probe_with_touch_mode = true
z_offset = 1.605

[bed_mesh]
speed = 300
horizontal_move_z = 5
mesh_min = 35, 30
mesh_max = 280,280
probe_count = 5, 5

[z_tilt]
z_positions = 
	380, 150
	-70, 150
points = 
	0, 150
	270, 150
speed = 300
horizontal_move_z = 5
retries = 10
retry_tolerance = 0.015

[safe_z_home]
home_xy_position = 150, 150
speed = 300
z_hop = 12

[neopixel Neopixel]
pin = PE6
color_order = GRB
chain_count = 76

[temperature_sensor mainboard]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[temperature_sensor pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 100
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547726494208: New connection
webhooks client 547726494208: Client info {'program': 'Moonraker', 'version': 'v0.8.0-182-g9785387'}
Loaded MCU 'mcu' 112 commands (v0.11.0-295-g83ef0e13 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-217.896311 slope=1306.779661
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (6.0, 45.0)     | (35.0, 30.0)
  1   | (67.2, 45.0)    | (96.2, 30.0)
  2   | (128.5, 45.0)   | (157.5, 30.0)
  3   | (189.8, 45.0)   | (218.8, 30.0)
  4   | (251.0, 45.0)   | (280.0, 30.0)
  5   | (251.0, 107.5)  | (280.0, 92.5)
  6   | (189.8, 107.5)  | (218.8, 92.5)
  7   | (128.5, 107.5)  | (157.5, 92.5)
  8   | (67.2, 107.5)   | (96.2, 92.5)
  9   | (6.0, 107.5)    | (35.0, 92.5)
  10  | (6.0, 170.0)    | (35.0, 155.0)
  11  | (67.2, 170.0)   | (96.2, 155.0)
  12  | (128.5, 170.0)  | (157.5, 155.0)
  13  | (189.8, 170.0)  | (218.8, 155.0)
  14  | (251.0, 170.0)  | (280.0, 155.0)
  15  | (251.0, 232.5)  | (280.0, 217.5)
  16  | (189.8, 232.5)  | (218.8, 217.5)
  17  | (128.5, 232.5)  | (157.5, 217.5)
  18  | (67.2, 232.5)   | (96.2, 217.5)
  19  | (6.0, 232.5)    | (35.0, 217.5)
  20  | (6.0, 295.0)    | (35.0, 280.0)
  21  | (67.2, 295.0)   | (96.2, 280.0)
  22  | (128.5, 295.0)  | (157.5, 280.0)
  23  | (189.8, 295.0)  | (218.8, 280.0)
  24  | (251.0, 295.0)  | (280.0, 280.0)
Starting heater checks for extruder
Stats 2728841.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2862 bytes_read=6001 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005046  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.45 cputime=689.878 memavail=3332136 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 547726494208
webhooks: registering remote method 'reboot_machine' for connection id: 547726494208
webhooks: registering remote method 'pause_job_queue' for connection id: 547726494208
webhooks: registering remote method 'start_job_queue' for connection id: 547726494208
webhooks: registering remote method 'set_device_power' for connection id: 547726494208
Stats 2728842.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2868 bytes_read=6164 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400003526  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.45 cputime=689.919 memavail=3329144 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728843.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2874 bytes_read=6341 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400004998  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.45 cputime=689.942 memavail=3334280 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728844.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000092 bytes_write=2880 bytes_read=6502 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006218  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.42 cputime=689.959 memavail=3333524 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728845.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000092 bytes_write=2886 bytes_read=6665 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006498  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=35.9 pi: temp=51.6 sysload=0.42 cputime=689.977 memavail=3333524 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728846.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000092 bytes_write=2892 bytes_read=6842 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.42 cputime=689.995 memavail=3333524 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728847.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000092 bytes_write=2898 bytes_read=6990 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007329  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.42 cputime=690.013 memavail=3333276 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728848.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000092 bytes_write=2904 bytes_read=7153 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007224  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.42 cputime=690.031 memavail=3333052 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728849.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2910 bytes_read=7339 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007843  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.38 cputime=690.050 memavail=3333052 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728850.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2916 bytes_read=7484 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007564  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=51.1 sysload=0.38 cputime=690.067 memavail=3333052 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728851.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2922 bytes_read=7647 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007392  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.38 cputime=690.086 memavail=3333052 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728852.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2928 bytes_read=7824 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007289  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=51.6 sysload=0.38 cputime=690.106 memavail=3333052 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728853.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2934 bytes_read=7972 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007519  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.1 sysload=0.38 cputime=690.123 memavail=3333052 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728854.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2940 bytes_read=8149 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007416  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=51.6 sysload=0.35 cputime=690.142 memavail=3332072 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728855.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2946 bytes_read=8326 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007290  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.35 cputime=690.159 memavail=3332080 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728856.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2952 bytes_read=8474 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007195  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.35 cputime=690.176 memavail=3332080 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728857.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2958 bytes_read=8637 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007127  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.35 cputime=690.194 memavail=3332080 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728858.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2964 bytes_read=8814 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007088  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=35.9 pi: temp=51.6 sysload=0.35 cputime=690.213 memavail=3331856 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728859.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2970 bytes_read=8976 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007034  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.6 sysload=0.32 cputime=690.232 memavail=3331856 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728860.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2976 bytes_read=9132 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007027  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=51.6 sysload=0.32 cputime=690.251 memavail=3331856 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728861.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2982 bytes_read=9309 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006983  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.32 cputime=690.271 memavail=3331856 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728862.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2988 bytes_read=9457 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006957  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.1 sysload=0.32 cputime=690.290 memavail=3331856 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728863.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2994 bytes_read=9620 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006961  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=36.0 pi: temp=51.6 sysload=0.32 cputime=690.308 memavail=3331856 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728864.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3000 bytes_read=9811 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007032  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=51.6 sysload=0.30 cputime=690.328 memavail=3331604 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728865.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3006 bytes_read=9959 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006990  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.30 cputime=690.346 memavail=3331604 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728866.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3012 bytes_read=10122 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007029  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.30 cputime=690.364 memavail=3331612 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728867.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3018 bytes_read=10299 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007026  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.2 pi: temp=51.6 sysload=0.30 cputime=690.382 memavail=3331612 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728868.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3024 bytes_read=10447 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007006  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.30 cputime=690.399 memavail=3331612 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728869.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3030 bytes_read=10624 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006978  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.43 cputime=690.413 memavail=3329340 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728870.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3036 bytes_read=10801 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006911  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.43 cputime=690.424 memavail=3328868 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728871.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3042 bytes_read=10943 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006849  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.43 cputime=690.435 memavail=3328868 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728872.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3048 bytes_read=11106 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006789  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.43 cputime=690.445 memavail=3328804 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728873.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3054 bytes_read=11283 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006747  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.43 cputime=690.456 memavail=3328672 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728874.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3060 bytes_read=11445 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006736  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.40 cputime=690.471 memavail=3328672 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728875.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3066 bytes_read=11608 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006731  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.6 sysload=0.40 cputime=690.489 memavail=3328676 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728876.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3072 bytes_read=11785 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006737  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.40 cputime=690.506 memavail=3328676 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728877.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3078 bytes_read=11933 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006761  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=52.6 sysload=0.40 cputime=690.522 memavail=3328676 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728878.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3084 bytes_read=12096 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006765  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.6 sysload=0.40 cputime=690.540 memavail=3328676 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728879.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3090 bytes_read=12287 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006769  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.6 sysload=0.37 cputime=690.558 memavail=3328836 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728880.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3096 bytes_read=12435 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006776  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.6 sysload=0.37 cputime=690.575 memavail=3328708 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728881.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3102 bytes_read=12597 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006799  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.2 pi: temp=51.6 sysload=0.37 cputime=690.593 memavail=3328708 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728882.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3108 bytes_read=12769 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006789  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.37 cputime=690.611 memavail=3328740 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 2728883.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3120 bytes_read=12933 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006806  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.37 cputime=690.630 memavail=3328740 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728884.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3126 bytes_read=13110 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006812  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.6 sysload=0.42 cputime=690.648 memavail=3328740 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728885.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3132 bytes_read=13287 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006817  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=51.6 sysload=0.42 cputime=690.665 memavail=3328744 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728886.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3138 bytes_read=13435 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.2 pi: temp=52.6 sysload=0.42 cputime=690.681 memavail=3328744 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728887.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3144 bytes_read=13598 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006830  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.42 cputime=690.699 memavail=3327988 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 2728888.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3150 bytes_read=13775 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006800  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=36.0 pi: temp=51.6 sysload=0.42 cputime=690.710 memavail=3486264 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
webhooks client 547726494208: Disconnected
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-295-g83ef0e13-dirty'
Untracked files: klippy/extras/gcode_shell_command.py, klippy/extras/led_effect.py, klippy/kinematics/limited_cartesian.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Tue Oct 10 06:04:17 2023 (1696910657.0 21.5)
===== Config file =====
[gcode_macro M600]
gcode = 
	{% set X = params.X|default(50)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	SAVE_GCODE_STATE NAME=M600_state
	PAUSE
	G91
	G1 E-.8 F2700
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F3000
	G91
	G1 E-50 F1000
	RESTORE_GCODE_STATE NAME=M600_state

[gcode_macro Wartungsposition]
gcode = 
	
	G90
	
	G1 X125 Y125 Z80 F3000
	
	G91
	
	M140 S0
	M104 S0
	M106 S0
	
	M84

[gcode_macro _CG28]
description = Helper: Conditional homing
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	SET_LED_EFFECT EFFECT=homing REPLACE=1
	G28
	{% endif %}

[gcode_macro _CG34]
gcode = 
	{% if printer['z_tilt'].applied == false %}
	SET_LED_EFFECT EFFECT=calibrating_z REPLACE=1
	Z_TILT_ADJUST
	SET_LED_EFFECT EFFECT=homing REPLACE=1
	G28 Z
	{% endif %}

[gcode_macro  AUTO_OFF_ENABLE]
gcode = 
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE=1

[gcode_macro  AUTO_OFF_DISABLE]
gcode = 
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE=0

[delayed_gcode _AUTO_OFF_SEQUENCE]
initial_duration = 0
gcode = 
	
	{% set autoOffEnabled = printer['gcode_macro _USER_VARIABLE'].auto_off_enable %}
	{% set bedTemp = printer['heater_bed'].temperature %}
	{% set hotendTemp = printer['extruder'].temperature %}
	{% set shutdown = 0 %}
	
	{% if autoOffEnabled == 0 %}
	{action_respond_info("Auto off aborted")}
	{% else %}
	{action_respond_info("Auto off check")}
	{% if printer.idle_timeout.state == "Idle" %}
	{% if bedTemp < 40 %}
	{% if hotendTemp < 40 %}
	{% set shutdown = 1 %}
	{% endif %}
	{% endif %}
	{% endif %}
	
	
	{% if shutdown == 1 %}
	POWER_OFF_PRINTER
	{% else %}
	UPDATE_DELAYED_GCODE ID=_AUTO_OFF_SEQUENCE DURATION=5
	{% endif %}
	{% endif %}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="printer",
	state="off")}

[gcode_macro _CALIBRATE_START]
gcode = 
	{% set extruder_temp = params.EXTRUDER_TEMP|float %}
	{% set bed_temp = params.BED_TEMP|float %}
	
	START_PRINT EXTRUDER={extruder_temp} BED={bed_temp}

[gcode_macro _CALIBRATE_END]
gcode = 
	
	
	G91
	G1 E-1 F3000
	G1 X-0.5 Y-0.5 Z5 E-5
	G90
	G1 X0 Y150 F2200
	M107
	
	G90

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set extruder_temp = params.EXTRUDER_TEMP|default(235)|float %}
	{% set bed_temp = params.BED_TEMP|default(75)|float %}
	{% set pa_start     = params.START|default(0)|float %}
	{% set pa_increment = params.INCREMENT|default(0.05)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	_CALIBRATE_START EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: BED_TEMP:%.0f" % bed_temp)}
	{action_respond_info("Parameter: EXTRUDER_TEMP:%.0f" % extruder_temp)}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	_CALIBRATE_END

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	{% set extruder_temp = params.EXTRUDER_TEMP|default(235)|float %}
	{% set bed_temp = params.BED_TEMP|default(75)|float %}
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(1)|int %}
	{% set fan_speed = params.FAN_SPEED|default(30)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.6)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(0)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Kalibrierungsdruck fuer den Extrusionsfluss wird gestartet")}
	{action_respond_info("")}
	{action_respond_info("Parameter: BED_TEMP:%.0f" % bed_temp)}
	{action_respond_info("Parameter: EXTRUDER_TEMP:%.0f" % extruder_temp)}
	{action_respond_info("Parameter: Aktiviere_Retract:%.0f" % do_retract)}
	{action_respond_info("Parameter: Druckgroesse:%.0f" % print_size)}
	{action_respond_info("Parameter: Druckobjekthoehe:%.0f" % print_height)}
	{action_respond_info("Parameter: Eckradius:%.0f" % corner_radius)}
	{action_respond_info("Parameter: Anzahl_Waende:%.0f" % number_of_perimeters)}
	{action_respond_info("Parameter: Lueftergeschwindigkeit:%.0f" % fan_speed)}
	{action_respond_info("Parameter: Extrusionsfaktor:%.4f" % e_multiplier)}
	{action_respond_info("Parameter: Filamentdurchmesser:%.2f" % filament_diameter)}
	{action_respond_info("Parameter: Extrusionsbreite:%.4f" % extrusion_width)}
	{action_respond_info("Parameter: Layerhoehe:%.2f" % layer_height)}
	{action_respond_info("Parameter: Retract_Laenge:%.0f" % retract_length)}
	{action_respond_info("Parameter: Purgewert:%.0f" % initial_purge)}
	{action_respond_info("Parameter: Druckgeschwindigkeit:%.0f" % (feedrate_print / 60))}
	{action_respond_info("Parameter: Speed_Z:%.0f" % (feedrate_z / 60))}
	{action_respond_info("Parameter: Speed_Rectract:%.0f" % (feedrate_retract / 60))}
	{action_respond_info("Parameter: Speed_Travel:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: Speed_Raft:%.0f" % (feedrate_raft / 60))}
	
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die -Not-Aus-Taste, um den Vorgang bei Bedarf zu stoppen.")}
	{action_respond_info("")}
	{action_respond_info("Verwendeter Extrusionsmultiplikator: %.4f" % e_multiplier)}
	{action_respond_info("Anzahl der zu druckenden Umfaenge: %d" % number_of_perimeters)}
	{action_respond_info("THEORETHISCHE SCHALENDICKE: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Messen Sie die Schalendicke mit einer Schieblehre oder einem Mikrometer. Rufen Sie dann das Berechnungsmakro mit dem gemessenen Wert auf:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	_CALIBRATE_START EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	_CALIBRATE_END

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[gcode_arcs]
resolution = 0.1

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Run standard input shaper test for all axes
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	{% set axes = params.AXES|default("x,y,xy")|string|lower %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	
	{% if axes=="xy" %}
	TEST_RESONANCES AXIS=X
	M400
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% elif axes=="y" %}
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% elif axes=="x" %}
	TEST_RESONANCES AXIS=X
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% else %}
	{action_respond_info("Please choose the axis: x, y or xy")}
	{% endif %}

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Run custom demi-axe test to analyze belts on CoreXY printers
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified input shaper excitating frequency for some time to diagnose vibrations
gcode = 
	{% set FREQUENCY = params.FREQUENCY|default(25)|int %}
	{% set TIME = params.TIME|default(10)|int %}
	{% set AXIS = params.AXIS|default("x")|string|lower %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={AXIS} FREQ_START={FREQUENCY-1} FREQ_END={FREQUENCY+1} HZ_PER_SEC={1/(TIME/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	
	
	
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set verbose = params.VERBOSE|default(true) %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|int * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|int * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	
	
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	}
	}
	%}
	
	
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y or Z is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	G1 Z{z_height}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_speed in range(min_speed, max_speed + speed_increment) %}
	{% if (curr_speed - min_speed) % speed_increment == 0 %}
	{% if verbose %}
	RESPOND MSG="Current speed: {(curr_speed / 60)|int} mm/s"
	{% endif %}
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{(curr_speed / 60)|int}n1
	
	G4 P300
	M400
	{% endif %}
	{% endfor %}
	
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS="VIBRATIONS {direction}"
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command plot_graph]
command = bash /home/pi/printer_data/config/scripts/plot_graphs.sh
timeout = 500.0
verbose = True

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	M300
	G91
	G92 E0
	G1 E350 F{max_velocity}
	G1 E25 F{speed}
	M300
	M300
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	M300
	G92 E0
	G1 E25 F{speed}
	G1 E-420 F{max_velocity}
	M300
	M300
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro START_PRINT]
gcode = 
	{% set extruder = params.EXTRUDER|default(0) %}
	{% set bed = params.BED|default(0) %}
	
	M83
	SET_LED_EFFECT EFFECT=heating REPLACE=1
	M190 S{bed}
	M109 S{extruder}
	_CG28
	_CG34
	SET_LED_EFFECT EFFECT=meshing REPLACE=1
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE
	SET_LED_EFFECT EFFECT=cleaning REPLACE=1
	LINE_PURGE
	SET_LED_EFFECT EFFECT=progress_bar REPLACE=1

[gcode_macro END_PRINT]
gcode = 
	SET_LED_EFFECT EFFECT=progress_bar STOP=1
	TURN_OFF_HEATERS
	G91
	G1 E-1 F3000
	G1 X-0.5 Y-0.5 Z5 E-5
	G90
	G1 X0 Y200 F2200
	M107
	M84
	G90
	AUTO_OFF_ENABLE

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	
	{% set z = params.Z|default(10)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}
	
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SAVE_GCODE_STATE NAME=PAUSE
	BASE_PAUSE
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}
	G91
	G1 Z{z} F900
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000
	SAVE_GCODE_STATE NAME=PAUSEPARK
	M104 S0
	SET_IDLE_TIMEOUT TIMEOUT=43200
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	
	{% set e = params.E|default(2.5)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	{% if etemp > 0 %}
	M109 S{etemp|int}
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100
	G91
	M83
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900
	{% else %}
	G1 Z{zhop * -1} F900
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60
	BASE_RESUME
	{% endif %}

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	END_PRINT
	BASE_CANCEL_PRINT
	SET_LED_EFFECT EFFECT=progress_bar STOP=1

[gcode_macro _USER_VARIABLE]
variable_auto_off_enable = 0
variable_fan_speed_nevermore = 0
variable_fan_target_chamber = 0
variable_pause_retract = 1.0
variable_time_of_print = 0
variable_extra_gcode_offset = -0.00
variable_probe_position_after_dock = {'x': 0, 'y': 0}
variable_probe_position_after_undock = {'x': 0, 'y': 0}
variable_probe_dock_position = {'x': 99, 'y': 44}
variable_probe_z_min = 25
variable_probe_travel_speed = 100
gcode = 
	
	{% set savedVars = printer.save_variables.variables %}
	{% set user_auto_off_enable = savedVars.autooffenable|default(0) %}
	{% set user_auto_off_enable = savedVars.extragcodeoffset|default(-0.06)|float %}
	
	
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE={user_auto_off_enable}

[gcode_macro _USER_VARIABLE_STORE]
gcode = 
	{% set extraGcodeOffset = printer['gcode_macro _USER_VARIABLE'].extra_gcode_offset %}
	{% set autoOffEnable = printer['gcode_macro _USER_VARIABLE'].auto_off_enable %}
	SAVE_VARIABLE VARIABLE=extraGcodeOffset VALUE={extraGcodeOffset}
	SAVE_VARIABLE VARIABLE=autoOffEnable VALUE={autoOffEnable}

[led_effect cleaning]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.02, 0.5)

[led_effect calibrating_z]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.0, 0.35)

[led_effect heating]
leds = 
	neopixel:Neopixel (1,3,7,8,6,2)
autostart = false
frame_rate = 60
layers = 
	comet  0.3  0 add (1, 0.18, 0)

[led_effect homing]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.6, 0.2)

[led_effect meshing]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.2, 1.0, 0.0)

[led_effect progress_bar]
leds = 
	neopixel:Neopixel
autostart = false
frame_rate = 60
layers = 
	progress  -1  0 add         ( 0, 0,1),( 0, 0.1, 0.6)
	static     0  0 top         ( 0, 0, 0.1)

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set probe_dock_enable = printer["gcode_macro _KAMP_Settings"].probe_dock_enable | abs %}
	{% set attach_macro = printer["gcode_macro _KAMP_Settings"].attach_macro | string %}
	{% set detach_macro = printer["gcode_macro _KAMP_Settings"].detach_macro | string %}
	{% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}
	{% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 8
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 30
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[exclude_object]

[force_move]
enable_force_move = True

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[printer]
kinematics = limited_cartesian
max_velocity = 361
max_x_velocity = 300
max_y_velocity = 300
max_accel = 5220
max_accel_to_decel = 5220
max_x_accel = 5000
max_y_accel = 1500
scale_xy_accel = true
max_z_velocity = 12
max_z_accel = 60

[stepper_x]
step_pin = PD4
dir_pin = PD3
enable_pin = !PD6
microsteps = 32
rotation_distance = 40
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
homing_retract_dist = 0
position_max = 310
homing_speed = 60

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
microsteps = 32
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
homing_retract_dist = 0
position_max = 320
homing_speed = 60

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 250
position_min = -2
homing_speed = 12

[stepper_z1]
step_pin = PD11
dir_pin = !PD10
enable_pin = !PD13
microsteps = 32
rotation_distance = 4

[extruder]
step_pin = PD15
dir_pin = PD14
enable_pin = !PC7
microsteps = 16
rotation_distance = 7.861
nozzle_diameter = 0.600
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104GT-2
sensor_pin = PA3
min_temp = 0
max_temp = 300
max_extrude_cross_section = 5
control = pid
pid_kp = 34.054
pid_ki = 1.261
pid_kd = 229.864

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 200
control = pid
pid_kp = 71.913
pid_ki = 1.386
pid_kd = 933.070

[fan]
pin = PB7

[heater_fan hotend_fan]
pin = PB6

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00

[tmc2209 stepper_x]
uart_pin = PD5
run_current = 1.000
stealthchop_threshold = 999999
diag_pin = ^PC1
driver_sgthrs = 90

[tmc2209 stepper_y]
uart_pin = PB1
run_current = 1.000
stealthchop_threshold = 999999
diag_pin = ^PC3
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PE9
run_current = 1.000
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = PE10
run_current = 1.000
stealthchop_threshold = 999999

[input_shaper]
shaper_freq_x = 53.2
shaper_type_x = mzv
shaper_freq_y = 50.0
shaper_type_y = mzv

[bltouch]
sensor_pin = ^PC13
control_pin = PE5
x_offset = 29
y_offset = -15
stow_on_each_sample = false
probe_with_touch_mode = true
z_offset = 1.605

[bed_mesh]
speed = 300
horizontal_move_z = 5
mesh_min = 35, 30
mesh_max = 280,280
probe_count = 5, 5

[z_tilt]
z_positions = 
	380, 150
	-70, 150
points = 
	0, 150
	270, 150
speed = 300
horizontal_move_z = 5
retries = 10
retry_tolerance = 0.015

[safe_z_home]
home_xy_position = 150, 150
speed = 300
z_hop = 12

[neopixel Neopixel]
pin = PE6
color_order = GRB
chain_count = 76

[temperature_sensor mainboard]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[temperature_sensor pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 100
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
webhooks client 548252731856: New connection
webhooks client 548252731856: Client info {'program': 'Moonraker', 'version': 'v0.8.0-182-g9785387'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 800, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 805, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(3439): Mon Oct  9 13:09:02 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32h743xx"
CONFIG_CLOCK_FREQ=400000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_SIZE=0x200000
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x20000
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x8020000
CONFIG_STM32_SELECT=y
# CONFIG_MACH_STM32F103 is not set
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F765 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32G070 is not set
# CONFIG_MACH_STM32G071 is not set
# CONFIG_MACH_STM32G0B0 is not set
# CONFIG_MACH_STM32G0B1 is not set
# CONFIG_MACH_STM32G431 is not set
# CONFIG_MACH_STM32H723 is not set
CONFIG_MACH_STM32H743=y
# CONFIG_MACH_STM32H750 is not set
# CONFIG_MACH_STM32L412 is not set
# CONFIG_MACH_N32G452 is not set
# CONFIG_MACH_N32G455 is not set
CONFIG_MACH_STM32H7=y
CONFIG_HAVE_STM32_USBOTG=y
CONFIG_HAVE_STM32_FDCANBUS=y
CONFIG_HAVE_STM32_USBCANBUS=y
CONFIG_STM32_DFU_ROM_ADDRESS=0x1ff09800
CONFIG_STM32_FLASH_START_20000=y
# CONFIG_STM32_FLASH_START_0000 is not set
# CONFIG_STM32_CLOCK_REF_8M is not set
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_20M is not set
# CONFIG_STM32_CLOCK_REF_24M is not set
CONFIG_STM32_CLOCK_REF_25M=y
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=25000000
CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12=y
# CONFIG_STM32_USB_PB14_PB15 is not set
# CONFIG_STM32_SERIAL_USART1 is not set
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_SERIAL_UART4 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
# CONFIG_STM32_MMENU_CANBUS_PB0_PB1 is not set
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
CONFIG_USB=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"

#
# USB ids
#
# end of USB ids

CONFIG_WANT_GPIO_BITBANGING=y
CONFIG_WANT_DISPLAYS=y
CONFIG_WANT_SENSORS=y
CONFIG_WANT_LIS2DW=y
CONFIG_WANT_SOFTWARE_I2C=y
CONFIG_WANT_SOFTWARE_SPI=y
CONFIG_CANBUS_FREQUENCY=1000000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(8231): Mon Oct  9 13:09:35 2023
Last MCU build version: v0.11.0-295-g83ef0e13
Last MCU build tools: gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2
Last MCU build config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Build file /home/pi/klipper/klippy/../out/klipper.elf(1781552): Mon Oct  9 13:09:50 2023
Attempting MCU 'mcu' reset
Unhandled exception during post run
Traceback (most recent call last):
  File "/home/pi/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 265, in open
    self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
FileNotFoundError: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 234, in run
    self.send_event("klippy:firmware_restart")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 951, in _firmware_restart
    self._restart_arduino()
  File "/home/pi/klipper/klippy/mcu.py", line 911, in _restart_arduino
    serialhdl.arduino_reset(self._serialport, self._reactor)
  File "/home/pi/klipper/klippy/serialhdl.py", line 379, in arduino_reset
    ser = serial.Serial(serialport, 2400, timeout=0, exclusive=True)
  File "/home/pi/klippy-env/lib/python3.9/site-packages/serial/serialutil.py", line 240, in __init__
    self.open()
  File "/home/pi/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 268, in open
    raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
serial.serialutil.SerialException: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00'
Restarting printer
Start printer at Tue Oct 10 06:06:20 2023 (1696910780.2 129.9)
===== Config file =====
[gcode_macro M600]
gcode = 
	{% set X = params.X|default(50)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	SAVE_GCODE_STATE NAME=M600_state
	PAUSE
	G91
	G1 E-.8 F2700
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F3000
	G91
	G1 E-50 F1000
	RESTORE_GCODE_STATE NAME=M600_state

[gcode_macro Wartungsposition]
gcode = 
	
	G90
	
	G1 X125 Y125 Z80 F3000
	
	G91
	
	M140 S0
	M104 S0
	M106 S0
	
	M84

[gcode_macro _CG28]
description = Helper: Conditional homing
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	SET_LED_EFFECT EFFECT=homing REPLACE=1
	G28
	{% endif %}

[gcode_macro _CG34]
gcode = 
	{% if printer['z_tilt'].applied == false %}
	SET_LED_EFFECT EFFECT=calibrating_z REPLACE=1
	Z_TILT_ADJUST
	SET_LED_EFFECT EFFECT=homing REPLACE=1
	G28 Z
	{% endif %}

[gcode_macro  AUTO_OFF_ENABLE]
gcode = 
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE=1

[gcode_macro  AUTO_OFF_DISABLE]
gcode = 
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE=0

[delayed_gcode _AUTO_OFF_SEQUENCE]
initial_duration = 0
gcode = 
	
	{% set autoOffEnabled = printer['gcode_macro _USER_VARIABLE'].auto_off_enable %}
	{% set bedTemp = printer['heater_bed'].temperature %}
	{% set hotendTemp = printer['extruder'].temperature %}
	{% set shutdown = 0 %}
	
	{% if autoOffEnabled == 0 %}
	{action_respond_info("Auto off aborted")}
	{% else %}
	{action_respond_info("Auto off check")}
	{% if printer.idle_timeout.state == "Idle" %}
	{% if bedTemp < 40 %}
	{% if hotendTemp < 40 %}
	{% set shutdown = 1 %}
	{% endif %}
	{% endif %}
	{% endif %}
	
	
	{% if shutdown == 1 %}
	POWER_OFF_PRINTER
	{% else %}
	UPDATE_DELAYED_GCODE ID=_AUTO_OFF_SEQUENCE DURATION=5
	{% endif %}
	{% endif %}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="printer",
	state="off")}

[gcode_macro _CALIBRATE_START]
gcode = 
	{% set extruder_temp = params.EXTRUDER_TEMP|float %}
	{% set bed_temp = params.BED_TEMP|float %}
	
	START_PRINT EXTRUDER={extruder_temp} BED={bed_temp}

[gcode_macro _CALIBRATE_END]
gcode = 
	
	
	G91
	G1 E-1 F3000
	G1 X-0.5 Y-0.5 Z5 E-5
	G90
	G1 X0 Y150 F2200
	M107
	
	G90

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set extruder_temp = params.EXTRUDER_TEMP|default(235)|float %}
	{% set bed_temp = params.BED_TEMP|default(75)|float %}
	{% set pa_start     = params.START|default(0)|float %}
	{% set pa_increment = params.INCREMENT|default(0.05)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	_CALIBRATE_START EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: BED_TEMP:%.0f" % bed_temp)}
	{action_respond_info("Parameter: EXTRUDER_TEMP:%.0f" % extruder_temp)}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	_CALIBRATE_END

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	{% set extruder_temp = params.EXTRUDER_TEMP|default(235)|float %}
	{% set bed_temp = params.BED_TEMP|default(75)|float %}
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(1)|int %}
	{% set fan_speed = params.FAN_SPEED|default(30)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.6)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(0)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Kalibrierungsdruck fuer den Extrusionsfluss wird gestartet")}
	{action_respond_info("")}
	{action_respond_info("Parameter: BED_TEMP:%.0f" % bed_temp)}
	{action_respond_info("Parameter: EXTRUDER_TEMP:%.0f" % extruder_temp)}
	{action_respond_info("Parameter: Aktiviere_Retract:%.0f" % do_retract)}
	{action_respond_info("Parameter: Druckgroesse:%.0f" % print_size)}
	{action_respond_info("Parameter: Druckobjekthoehe:%.0f" % print_height)}
	{action_respond_info("Parameter: Eckradius:%.0f" % corner_radius)}
	{action_respond_info("Parameter: Anzahl_Waende:%.0f" % number_of_perimeters)}
	{action_respond_info("Parameter: Lueftergeschwindigkeit:%.0f" % fan_speed)}
	{action_respond_info("Parameter: Extrusionsfaktor:%.4f" % e_multiplier)}
	{action_respond_info("Parameter: Filamentdurchmesser:%.2f" % filament_diameter)}
	{action_respond_info("Parameter: Extrusionsbreite:%.4f" % extrusion_width)}
	{action_respond_info("Parameter: Layerhoehe:%.2f" % layer_height)}
	{action_respond_info("Parameter: Retract_Laenge:%.0f" % retract_length)}
	{action_respond_info("Parameter: Purgewert:%.0f" % initial_purge)}
	{action_respond_info("Parameter: Druckgeschwindigkeit:%.0f" % (feedrate_print / 60))}
	{action_respond_info("Parameter: Speed_Z:%.0f" % (feedrate_z / 60))}
	{action_respond_info("Parameter: Speed_Rectract:%.0f" % (feedrate_retract / 60))}
	{action_respond_info("Parameter: Speed_Travel:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: Speed_Raft:%.0f" % (feedrate_raft / 60))}
	
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die -Not-Aus-Taste, um den Vorgang bei Bedarf zu stoppen.")}
	{action_respond_info("")}
	{action_respond_info("Verwendeter Extrusionsmultiplikator: %.4f" % e_multiplier)}
	{action_respond_info("Anzahl der zu druckenden Umfaenge: %d" % number_of_perimeters)}
	{action_respond_info("THEORETHISCHE SCHALENDICKE: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Messen Sie die Schalendicke mit einer Schieblehre oder einem Mikrometer. Rufen Sie dann das Berechnungsmakro mit dem gemessenen Wert auf:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	_CALIBRATE_START EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	_CALIBRATE_END

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[gcode_arcs]
resolution = 0.1

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Run standard input shaper test for all axes
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	{% set axes = params.AXES|default("x,y,xy")|string|lower %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	
	{% if axes=="xy" %}
	TEST_RESONANCES AXIS=X
	M400
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% elif axes=="y" %}
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% elif axes=="x" %}
	TEST_RESONANCES AXIS=X
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
	
	{% else %}
	{action_respond_info("Please choose the axis: x, y or xy")}
	{% endif %}

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Run custom demi-axe test to analyze belts on CoreXY printers
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified input shaper excitating frequency for some time to diagnose vibrations
gcode = 
	{% set FREQUENCY = params.FREQUENCY|default(25)|int %}
	{% set TIME = params.TIME|default(10)|int %}
	{% set AXIS = params.AXIS|default("x")|string|lower %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={AXIS} FREQ_START={FREQUENCY-1} FREQ_END={FREQUENCY+1} HZ_PER_SEC={1/(TIME/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	
	
	
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set verbose = params.VERBOSE|default(true) %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|int * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|int * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	
	
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	}
	}
	%}
	
	
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y or Z is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	G1 Z{z_height}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_speed in range(min_speed, max_speed + speed_increment) %}
	{% if (curr_speed - min_speed) % speed_increment == 0 %}
	{% if verbose %}
	RESPOND MSG="Current speed: {(curr_speed / 60)|int} mm/s"
	{% endif %}
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{(curr_speed / 60)|int}n1
	
	G4 P300
	M400
	{% endif %}
	{% endfor %}
	
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS="VIBRATIONS {direction}"
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command plot_graph]
command = bash /home/pi/printer_data/config/scripts/plot_graphs.sh
timeout = 500.0
verbose = True

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	M300
	G91
	G92 E0
	G1 E350 F{max_velocity}
	G1 E25 F{speed}
	M300
	M300
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	M300
	G92 E0
	G1 E25 F{speed}
	G1 E-420 F{max_velocity}
	M300
	M300
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro START_PRINT]
gcode = 
	{% set extruder = params.EXTRUDER|default(0) %}
	{% set bed = params.BED|default(0) %}
	
	M83
	SET_LED_EFFECT EFFECT=heating REPLACE=1
	M190 S{bed}
	M109 S{extruder}
	_CG28
	_CG34
	SET_LED_EFFECT EFFECT=meshing REPLACE=1
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE
	SET_LED_EFFECT EFFECT=cleaning REPLACE=1
	LINE_PURGE
	SET_LED_EFFECT EFFECT=progress_bar REPLACE=1

[gcode_macro END_PRINT]
gcode = 
	SET_LED_EFFECT EFFECT=progress_bar STOP=1
	TURN_OFF_HEATERS
	G91
	G1 E-1 F3000
	G1 X-0.5 Y-0.5 Z5 E-5
	G90
	G1 X0 Y200 F2200
	M107
	M84
	G90
	AUTO_OFF_ENABLE

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	
	{% set z = params.Z|default(10)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}
	
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SAVE_GCODE_STATE NAME=PAUSE
	BASE_PAUSE
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}
	G91
	G1 Z{z} F900
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000
	SAVE_GCODE_STATE NAME=PAUSEPARK
	M104 S0
	SET_IDLE_TIMEOUT TIMEOUT=43200
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	
	{% set e = params.E|default(2.5)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	{% if etemp > 0 %}
	M109 S{etemp|int}
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100
	G91
	M83
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900
	{% else %}
	G1 Z{zhop * -1} F900
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60
	BASE_RESUME
	{% endif %}

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	END_PRINT
	BASE_CANCEL_PRINT
	SET_LED_EFFECT EFFECT=progress_bar STOP=1

[gcode_macro _USER_VARIABLE]
variable_auto_off_enable = 0
variable_fan_speed_nevermore = 0
variable_fan_target_chamber = 0
variable_pause_retract = 1.0
variable_time_of_print = 0
variable_extra_gcode_offset = -0.00
variable_probe_position_after_dock = {'x': 0, 'y': 0}
variable_probe_position_after_undock = {'x': 0, 'y': 0}
variable_probe_dock_position = {'x': 99, 'y': 44}
variable_probe_z_min = 25
variable_probe_travel_speed = 100
gcode = 
	
	{% set savedVars = printer.save_variables.variables %}
	{% set user_auto_off_enable = savedVars.autooffenable|default(0) %}
	{% set user_auto_off_enable = savedVars.extragcodeoffset|default(-0.06)|float %}
	
	
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=auto_off_enable VALUE={user_auto_off_enable}

[gcode_macro _USER_VARIABLE_STORE]
gcode = 
	{% set extraGcodeOffset = printer['gcode_macro _USER_VARIABLE'].extra_gcode_offset %}
	{% set autoOffEnable = printer['gcode_macro _USER_VARIABLE'].auto_off_enable %}
	SAVE_VARIABLE VARIABLE=extraGcodeOffset VALUE={extraGcodeOffset}
	SAVE_VARIABLE VARIABLE=autoOffEnable VALUE={autoOffEnable}

[led_effect cleaning]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.02, 0.5)

[led_effect calibrating_z]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.0, 0.35)

[led_effect heating]
leds = 
	neopixel:Neopixel (1,3,7,8,6,2)
autostart = false
frame_rate = 60
layers = 
	comet  0.3  0 add (1, 0.18, 0)

[led_effect homing]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.0, 0.6, 0.2)

[led_effect meshing]
autostart = false
frame_rate = 60
leds = 
	neopixel:Neopixel (1-76)
layers = 
	breathing  3 1 top (0.2, 1.0, 0.0)

[led_effect progress_bar]
leds = 
	neopixel:Neopixel
autostart = false
frame_rate = 60
layers = 
	progress  -1  0 add         ( 0, 0,1),( 0, 0.1, 0.6)
	static     0  0 top         ( 0, 0, 0.1)

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set probe_dock_enable = printer["gcode_macro _KAMP_Settings"].probe_dock_enable | abs %}
	{% set attach_macro = printer["gcode_macro _KAMP_Settings"].attach_macro | string %}
	{% set detach_macro = printer["gcode_macro _KAMP_Settings"].detach_macro | string %}
	{% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}
	{% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 8
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 30
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[exclude_object]

[force_move]
enable_force_move = True

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[printer]
kinematics = limited_cartesian
max_velocity = 361
max_x_velocity = 300
max_y_velocity = 300
max_accel = 5220
max_accel_to_decel = 5220
max_x_accel = 5000
max_y_accel = 1500
scale_xy_accel = true
max_z_velocity = 12
max_z_accel = 60

[stepper_x]
step_pin = PD4
dir_pin = PD3
enable_pin = !PD6
microsteps = 32
rotation_distance = 40
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
homing_retract_dist = 0
position_max = 310
homing_speed = 60

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
microsteps = 32
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
homing_retract_dist = 0
position_max = 320
homing_speed = 60

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 250
position_min = -2
homing_speed = 12

[stepper_z1]
step_pin = PD11
dir_pin = !PD10
enable_pin = !PD13
microsteps = 32
rotation_distance = 4

[extruder]
step_pin = PD15
dir_pin = PD14
enable_pin = !PC7
microsteps = 16
rotation_distance = 7.861
nozzle_diameter = 0.600
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104GT-2
sensor_pin = PA3
min_temp = 0
max_temp = 300
max_extrude_cross_section = 5
control = pid
pid_kp = 34.054
pid_ki = 1.261
pid_kd = 229.864

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 200
control = pid
pid_kp = 71.913
pid_ki = 1.386
pid_kd = 933.070

[fan]
pin = PB7

[heater_fan hotend_fan]
pin = PB6

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_2C002D000951303230373534-if00

[tmc2209 stepper_x]
uart_pin = PD5
run_current = 1.000
stealthchop_threshold = 999999
diag_pin = ^PC1
driver_sgthrs = 90

[tmc2209 stepper_y]
uart_pin = PB1
run_current = 1.000
stealthchop_threshold = 999999
diag_pin = ^PC3
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PE9
run_current = 1.000
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = PE10
run_current = 1.000
stealthchop_threshold = 999999

[input_shaper]
shaper_freq_x = 53.2
shaper_type_x = mzv
shaper_freq_y = 50.0
shaper_type_y = mzv

[bltouch]
sensor_pin = ^PC13
control_pin = PE5
x_offset = 29
y_offset = -15
stow_on_each_sample = false
probe_with_touch_mode = true
z_offset = 1.605

[bed_mesh]
speed = 300
horizontal_move_z = 5
mesh_min = 35, 30
mesh_max = 280,280
probe_count = 5, 5

[z_tilt]
z_positions = 
	380, 150
	-70, 150
points = 
	0, 150
	270, 150
speed = 300
horizontal_move_z = 5
retries = 10
retry_tolerance = 0.015

[safe_z_home]
home_xy_position = 150, 150
speed = 300
z_hop = 12

[neopixel Neopixel]
pin = PE6
color_order = GRB
chain_count = 76

[temperature_sensor mainboard]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[temperature_sensor pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 100
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 548255495648: New connection
webhooks client 548255495648: Client info {'program': 'Moonraker', 'version': 'v0.8.0-182-g9785387'}
Loaded MCU 'mcu' 112 commands (v0.11.0-295-g83ef0e13 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-217.896311 slope=1306.779661
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (6.0, 45.0)     | (35.0, 30.0)
  1   | (67.2, 45.0)    | (96.2, 30.0)
  2   | (128.5, 45.0)   | (157.5, 30.0)
  3   | (189.8, 45.0)   | (218.8, 30.0)
  4   | (251.0, 45.0)   | (280.0, 30.0)
  5   | (251.0, 107.5)  | (280.0, 92.5)
  6   | (189.8, 107.5)  | (218.8, 92.5)
  7   | (128.5, 107.5)  | (157.5, 92.5)
  8   | (67.2, 107.5)   | (96.2, 92.5)
  9   | (6.0, 107.5)    | (35.0, 92.5)
  10  | (6.0, 170.0)    | (35.0, 155.0)
  11  | (67.2, 170.0)   | (96.2, 155.0)
  12  | (128.5, 170.0)  | (157.5, 155.0)
  13  | (189.8, 170.0)  | (218.8, 155.0)
  14  | (251.0, 170.0)  | (280.0, 155.0)
  15  | (251.0, 232.5)  | (280.0, 217.5)
  16  | (189.8, 232.5)  | (218.8, 217.5)
  17  | (128.5, 232.5)  | (157.5, 217.5)
  18  | (67.2, 232.5)   | (96.2, 217.5)
  19  | (6.0, 232.5)    | (35.0, 217.5)
  20  | (6.0, 295.0)    | (35.0, 280.0)
  21  | (67.2, 295.0)   | (96.2, 280.0)
  22  | (128.5, 295.0)  | (157.5, 280.0)
  23  | (189.8, 295.0)  | (218.8, 280.0)
  24  | (251.0, 295.0)  | (280.0, 280.0)
Starting heater checks for extruder
Stats 133.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2862 bytes_read=5957 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400002415  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=31.1 pi: temp=53.1 sysload=0.68 cputime=4.236 memavail=3397424 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 134.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2868 bytes_read=6105 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005550  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=31.4 pi: temp=53.1 sysload=0.68 cputime=4.282 memavail=3396312 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548255495648
webhooks: registering remote method 'reboot_machine' for connection id: 548255495648
webhooks: registering remote method 'pause_job_queue' for connection id: 548255495648
webhooks: registering remote method 'start_job_queue' for connection id: 548255495648
webhooks: registering remote method 'set_device_power' for connection id: 548255495648
Stats 135.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000093 bytes_write=2874 bytes_read=6281 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006422  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=31.5 pi: temp=52.6 sysload=0.68 cputime=4.305 memavail=3394148 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 136.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000093 bytes_write=2880 bytes_read=6458 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006467  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=31.7 pi: temp=53.1 sysload=0.62 cputime=4.318 memavail=3393408 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 137.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000093 bytes_write=2886 bytes_read=6606 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007628  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=32.1 pi: temp=53.1 sysload=0.62 cputime=4.335 memavail=3397188 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 138.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000093 bytes_write=2892 bytes_read=6769 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008127  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=32.1 pi: temp=52.6 sysload=0.62 cputime=4.354 memavail=3397188 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 139.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000093 bytes_write=2898 bytes_read=6946 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007769  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=32.4 pi: temp=53.1 sysload=0.62 cputime=4.366 memavail=3395928 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 140.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2904 bytes_read=7108 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007646  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=32.5 pi: temp=53.1 sysload=0.62 cputime=4.376 memavail=3395424 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 141.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2910 bytes_read=7264 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007561  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=32.5 pi: temp=53.6 sysload=0.57 cputime=4.386 memavail=3395424 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 142.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2916 bytes_read=7441 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007991  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=32.6 pi: temp=52.6 sysload=0.57 cputime=4.396 memavail=3397196 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 143.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2922 bytes_read=7589 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007971  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=32.7 pi: temp=53.1 sysload=0.57 cputime=4.406 memavail=3397200 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 144.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2928 bytes_read=7752 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008470  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=32.7 pi: temp=52.6 sysload=0.57 cputime=4.423 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 145.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2934 bytes_read=7943 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008371  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=32.9 pi: temp=53.1 sysload=0.57 cputime=4.443 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 146.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2940 bytes_read=8091 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008273  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.1 pi: temp=53.1 sysload=0.61 cputime=4.459 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 147.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2946 bytes_read=8254 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008244  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=33.0 pi: temp=51.6 sysload=0.61 cputime=4.477 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 148.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2952 bytes_read=8431 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008154  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=33.0 pi: temp=52.6 sysload=0.61 cputime=4.495 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 149.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2958 bytes_read=8579 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008449  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=33.0 pi: temp=52.6 sysload=0.61 cputime=4.511 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 150.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2964 bytes_read=8756 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008374  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.1 pi: temp=52.1 sysload=0.61 cputime=4.530 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 151.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2970 bytes_read=8930 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008250  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.1 pi: temp=52.6 sysload=0.64 cputime=4.548 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 152.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2976 bytes_read=9074 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008163  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.2 pi: temp=51.6 sysload=0.64 cputime=4.565 memavail=3397192 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 153.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2982 bytes_read=9237 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008110  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.3 pi: temp=52.1 sysload=0.64 cputime=4.584 memavail=3396968 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 154.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2988 bytes_read=9414 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007975  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.4 pi: temp=52.1 sysload=0.64 cputime=4.595 memavail=3396972 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 155.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=2994 bytes_read=9576 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007840  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.4 pi: temp=53.1 sysload=0.64 cputime=4.605 memavail=3396972 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 156.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3000 bytes_read=9739 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007745  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.5 pi: temp=53.1 sysload=0.67 cputime=4.617 memavail=3394228 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 157.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3006 bytes_read=9916 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007635  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.6 pi: temp=54.0 sysload=0.67 cputime=4.628 memavail=3400176 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 158.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3012 bytes_read=10064 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007546  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.6 pi: temp=53.6 sysload=0.67 cputime=4.638 memavail=3400176 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 159.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3018 bytes_read=10241 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007629  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.6 pi: temp=53.6 sysload=0.67 cputime=4.656 memavail=3400180 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 160.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3024 bytes_read=10418 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007673  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.6 pi: temp=52.6 sysload=0.67 cputime=4.675 memavail=3400180 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 161.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3030 bytes_read=10566 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007635  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.8 pi: temp=52.6 sysload=0.69 cputime=4.693 memavail=3400180 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 162.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3036 bytes_read=10737 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007606  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.8 pi: temp=52.6 sysload=0.69 cputime=4.711 memavail=3400180 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 163.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3042 bytes_read=10898 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007595  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.8 pi: temp=52.1 sysload=0.69 cputime=4.729 memavail=3399928 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 164.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3048 bytes_read=11046 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007564  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.9 pi: temp=51.1 sysload=0.69 cputime=4.746 memavail=3399692 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 165.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3054 bytes_read=11237 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007530  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.9 pi: temp=52.1 sysload=0.69 cputime=4.764 memavail=3399692 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 166.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3060 bytes_read=11400 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007525  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.9 pi: temp=52.1 sysload=0.72 cputime=4.782 memavail=3399692 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 167.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3066 bytes_read=11548 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007521  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.0 pi: temp=52.6 sysload=0.72 cputime=4.800 memavail=3399704 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 168.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3072 bytes_read=11725 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007526  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.9 pi: temp=52.6 sysload=0.72 cputime=4.818 memavail=3399456 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 169.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3078 bytes_read=11888 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007501  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=33.9 pi: temp=52.1 sysload=0.72 cputime=4.835 memavail=3399460 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 170.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3084 bytes_read=12050 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007482  heater_bed: target=0 temp=39.1 pwm=0.000 mainboard: temp=34.0 pi: temp=51.6 sysload=0.72 cputime=4.853 memavail=3399460 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 171.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3090 bytes_read=12227 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007468  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.0 pi: temp=52.6 sysload=0.66 cputime=4.871 memavail=3399460 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 172.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3096 bytes_read=12390 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007443  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.0 pi: temp=52.6 sysload=0.66 cputime=4.889 memavail=3399468 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 173.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3102 bytes_read=12531 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007428  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.0 pi: temp=52.6 sysload=0.66 cputime=4.906 memavail=3398980 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 174.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3114 bytes_read=12723 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007388  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.0 pi: temp=52.1 sysload=0.66 cputime=4.917 memavail=3398728 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 175.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3120 bytes_read=12900 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007344  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.0 pi: temp=53.1 sysload=0.66 cputime=4.927 memavail=3398728 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 176.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3126 bytes_read=13048 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007319  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.1 pi: temp=53.1 sysload=0.69 cputime=4.936 memavail=3398728 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 177.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3132 bytes_read=13225 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007311  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.2 pi: temp=52.6 sysload=0.69 cputime=4.946 memavail=3398728 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 178.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3138 bytes_read=13388 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007289  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.1 pi: temp=52.1 sysload=0.69 cputime=4.956 memavail=3398496 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 179.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3144 bytes_read=13536 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007291  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.2 pi: temp=52.6 sysload=0.69 cputime=4.973 memavail=3398496 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 180.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3150 bytes_read=13727 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007298  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.2 pi: temp=51.6 sysload=0.69 cputime=4.992 memavail=3398496 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 181.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3156 bytes_read=13890 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007307  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.1 pi: temp=52.1 sysload=0.63 cputime=5.009 memavail=3398500 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 182.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3162 bytes_read=14038 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007316  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.2 pi: temp=53.1 sysload=0.63 cputime=5.027 memavail=3398500 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 183.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3168 bytes_read=14213 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007313  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.3 pi: temp=52.1 sysload=0.63 cputime=5.045 memavail=3398500 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 184.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3174 bytes_read=14370 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007279  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.2 pi: temp=52.6 sysload=0.63 cputime=5.055 memavail=3398512 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 185.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3180 bytes_read=14518 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007249  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.4 pi: temp=53.1 sysload=0.63 cputime=5.065 memavail=3398512 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 186.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3186 bytes_read=14709 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007307  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.3 pi: temp=53.6 sysload=0.66 cputime=5.075 memavail=3398512 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 187.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3192 bytes_read=14872 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007287  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.4 pi: temp=52.1 sysload=0.66 cputime=5.084 memavail=3398512 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 188.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3198 bytes_read=15020 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007257  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.4 pi: temp=51.6 sysload=0.66 cputime=5.094 memavail=3398512 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 189.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3204 bytes_read=15197 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007261  heater_bed: target=0 temp=39.0 pwm=0.000 mainboard: temp=34.4 pi: temp=52.1 sysload=0.66 cputime=5.113 memavail=3398520 print_time=0.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Heater heater_bed approaching new target of 75.000
Stats 972.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=7996 bytes_read=144472 bytes_retransmit=9 bytes_invalid=0 send_seq=1071 receive_seq=1071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=39.1 pwm=1.000 mainboard: temp=36.1 pi: temp=52.6 sysload=0.20 cputime=15.955 memavail=3402044 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 973.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8002 bytes_read=144649 bytes_retransmit=9 bytes_invalid=0 send_seq=1072 receive_seq=1072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006903  heater_bed: target=75 temp=39.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.20 cputime=15.972 memavail=3400828 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 974.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8008 bytes_read=144826 bytes_retransmit=9 bytes_invalid=0 send_seq=1073 receive_seq=1073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=39.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.20 cputime=15.990 memavail=3400080 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 975.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8014 bytes_read=144974 bytes_retransmit=9 bytes_invalid=0 send_seq=1074 receive_seq=1074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=39.3 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.20 cputime=16.006 memavail=3400080 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 976.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8036 bytes_read=145156 bytes_retransmit=9 bytes_invalid=0 send_seq=1076 receive_seq=1076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006906  heater_bed: target=75 temp=39.5 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.27 cputime=16.025 memavail=3400080 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000
Stats 977.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8042 bytes_read=145319 bytes_retransmit=9 bytes_invalid=0 send_seq=1077 receive_seq=1077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006903  heater_bed: target=75 temp=39.6 pwm=1.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.27 cputime=16.043 memavail=3400080 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000
Stats 978.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8048 bytes_read=145460 bytes_retransmit=9 bytes_invalid=0 send_seq=1078 receive_seq=1078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006906  heater_bed: target=75 temp=39.7 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.27 cputime=16.060 memavail=3399148 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000
Stats 979.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8054 bytes_read=145651 bytes_retransmit=9 bytes_invalid=0 send_seq=1079 receive_seq=1079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006902  heater_bed: target=75 temp=40.0 pwm=1.000 mainboard: temp=35.8 pi: temp=52.6 sysload=0.27 cputime=16.078 memavail=3399148 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000
Stats 980.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8060 bytes_read=145814 bytes_retransmit=9 bytes_invalid=0 send_seq=1080 receive_seq=1080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=40.2 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.27 cputime=16.094 memavail=3399148 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000
Stats 981.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8082 bytes_read=145967 bytes_retransmit=9 bytes_invalid=0 send_seq=1082 receive_seq=1082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006898  heater_bed: target=75 temp=40.5 pwm=1.000 mainboard: temp=35.9 pi: temp=53.1 sysload=0.25 cputime=16.113 memavail=3399148 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.2 pwm=0.000
Stats 982.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8088 bytes_read=146144 bytes_retransmit=9 bytes_invalid=0 send_seq=1083 receive_seq=1083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006899  heater_bed: target=75 temp=40.8 pwm=1.000 mainboard: temp=35.8 pi: temp=52.1 sysload=0.25 cputime=16.133 memavail=3399148 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000
Stats 983.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8094 bytes_read=146307 bytes_retransmit=9 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006889  heater_bed: target=75 temp=41.0 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.25 cputime=16.147 memavail=3399148 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000
Stats 984.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8100 bytes_read=146455 bytes_retransmit=9 bytes_invalid=0 send_seq=1085 receive_seq=1085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006878  heater_bed: target=75 temp=41.2 pwm=1.000 mainboard: temp=35.8 pi: temp=52.6 sysload=0.25 cputime=16.157 memavail=3398656 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.5 pwm=0.000
Stats 985.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8122 bytes_read=146651 bytes_retransmit=9 bytes_invalid=0 send_seq=1087 receive_seq=1087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006879  heater_bed: target=75 temp=41.5 pwm=1.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.25 cputime=16.168 memavail=3398656 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.6 pwm=0.000
Stats 986.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8128 bytes_read=146814 bytes_retransmit=9 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006871  heater_bed: target=75 temp=41.7 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.31 cputime=16.178 memavail=3398656 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000
Stats 987.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8134 bytes_read=146962 bytes_retransmit=9 bytes_invalid=0 send_seq=1089 receive_seq=1089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006863  heater_bed: target=75 temp=42.0 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.31 cputime=16.187 memavail=3398656 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000
Stats 988.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8140 bytes_read=147136 bytes_retransmit=9 bytes_invalid=0 send_seq=1090 receive_seq=1090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006865  heater_bed: target=75 temp=42.3 pwm=1.000 mainboard: temp=35.8 pi: temp=53.6 sysload=0.31 cputime=16.202 memavail=3398208 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000
Stats 989.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8162 bytes_read=147300 bytes_retransmit=9 bytes_invalid=0 send_seq=1092 receive_seq=1092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006872  heater_bed: target=75 temp=42.5 pwm=1.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.31 cputime=16.221 memavail=3398208 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000
Stats 990.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8168 bytes_read=147462 bytes_retransmit=9 bytes_invalid=0 send_seq=1093 receive_seq=1093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006888  heater_bed: target=75 temp=42.7 pwm=1.000 mainboard: temp=35.8 pi: temp=53.6 sysload=0.31 cputime=16.239 memavail=3398208 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000
Stats 991.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8174 bytes_read=147639 bytes_retransmit=9 bytes_invalid=0 send_seq=1094 receive_seq=1094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=43.1 pwm=1.000 mainboard: temp=35.7 pi: temp=53.1 sysload=0.44 cputime=16.257 memavail=3398212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000
Stats 992.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8180 bytes_read=147802 bytes_retransmit=9 bytes_invalid=0 send_seq=1095 receive_seq=1095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=43.3 pwm=1.000 mainboard: temp=35.8 pi: temp=52.6 sysload=0.44 cputime=16.275 memavail=3398212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000
Stats 993.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8202 bytes_read=147955 bytes_retransmit=9 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006886  heater_bed: target=75 temp=43.5 pwm=1.000 mainboard: temp=35.9 pi: temp=51.6 sysload=0.44 cputime=16.289 memavail=3398212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.4 pwm=0.000
Stats 994.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8208 bytes_read=148132 bytes_retransmit=9 bytes_invalid=0 send_seq=1098 receive_seq=1098 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006879  heater_bed: target=75 temp=43.9 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.44 cputime=16.299 memavail=3397964 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.4 pwm=0.000
Stats 995.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8214 bytes_read=148309 bytes_retransmit=9 bytes_invalid=0 send_seq=1099 receive_seq=1099 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006869  heater_bed: target=75 temp=44.1 pwm=1.000 mainboard: temp=35.9 pi: temp=53.1 sysload=0.44 cputime=16.309 memavail=3397972 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000
Stats 996.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8220 bytes_read=148457 bytes_retransmit=9 bytes_invalid=0 send_seq=1100 receive_seq=1100 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006862  heater_bed: target=75 temp=44.3 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.41 cputime=16.318 memavail=3399452 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.7 pwm=0.000
Stats 997.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8242 bytes_read=148639 bytes_retransmit=9 bytes_invalid=0 send_seq=1102 receive_seq=1102 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006855  heater_bed: target=75 temp=44.6 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.41 cputime=16.328 memavail=3399484 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.7 pwm=0.000
Stats 998.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8248 bytes_read=148802 bytes_retransmit=9 bytes_invalid=0 send_seq=1103 receive_seq=1103 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006861  heater_bed: target=75 temp=44.8 pwm=1.000 mainboard: temp=35.8 pi: temp=52.6 sysload=0.41 cputime=16.342 memavail=3398308 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000
Stats 999.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8254 bytes_read=148945 bytes_retransmit=9 bytes_invalid=0 send_seq=1104 receive_seq=1104 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006863  heater_bed: target=75 temp=45.1 pwm=1.000 mainboard: temp=36.2 pi: temp=53.1 sysload=0.41 cputime=16.357 memavail=3398308 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000
Stats 1000.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8260 bytes_read=149134 bytes_retransmit=9 bytes_invalid=0 send_seq=1105 receive_seq=1105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006881  heater_bed: target=75 temp=45.4 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.41 cputime=16.373 memavail=3394548 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000
Stats 1001.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8266 bytes_read=149297 bytes_retransmit=9 bytes_invalid=0 send_seq=1106 receive_seq=1106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006871  heater_bed: target=75 temp=45.6 pwm=1.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.45 cputime=16.383 memavail=3396580 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000
Stats 1002.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8288 bytes_read=149450 bytes_retransmit=9 bytes_invalid=0 send_seq=1108 receive_seq=1108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006862  heater_bed: target=75 temp=45.8 pwm=1.000 mainboard: temp=35.9 pi: temp=53.6 sysload=0.45 cputime=16.393 memavail=3396580 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000
Stats 1003.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8294 bytes_read=149627 bytes_retransmit=9 bytes_invalid=0 send_seq=1109 receive_seq=1109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006856  heater_bed: target=75 temp=46.2 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.45 cputime=16.403 memavail=3396356 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000
Stats 1004.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8300 bytes_read=149790 bytes_retransmit=9 bytes_invalid=0 send_seq=1110 receive_seq=1110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006851  heater_bed: target=75 temp=46.3 pwm=1.000 mainboard: temp=35.9 pi: temp=53.1 sysload=0.45 cputime=16.413 memavail=3396104 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.5 pwm=0.000
Stats 1005.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8306 bytes_read=149952 bytes_retransmit=9 bytes_invalid=0 send_seq=1111 receive_seq=1111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006845  heater_bed: target=75 temp=46.6 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.45 cputime=16.426 memavail=3396104 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.5 pwm=0.000
Stats 1006.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8328 bytes_read=150134 bytes_retransmit=9 bytes_invalid=0 send_seq=1113 receive_seq=1113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006865  heater_bed: target=75 temp=46.9 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.50 cputime=16.444 memavail=3396104 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.6 pwm=0.000
Stats 1007.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8334 bytes_read=150297 bytes_retransmit=9 bytes_invalid=0 send_seq=1114 receive_seq=1114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006868  heater_bed: target=75 temp=47.1 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.50 cputime=16.463 memavail=3396104 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.7 pwm=0.000
Stats 1008.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8340 bytes_read=150445 bytes_retransmit=9 bytes_invalid=0 send_seq=1115 receive_seq=1115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006874  heater_bed: target=75 temp=47.3 pwm=1.000 mainboard: temp=35.9 pi: temp=53.1 sysload=0.50 cputime=16.481 memavail=3395168 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.8 pwm=0.000
Stats 1009.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8346 bytes_read=150622 bytes_retransmit=9 bytes_invalid=0 send_seq=1116 receive_seq=1116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006875  heater_bed: target=75 temp=47.6 pwm=1.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.50 cputime=16.499 memavail=3395168 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000
Stats 1010.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8368 bytes_read=150797 bytes_retransmit=9 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006877  heater_bed: target=75 temp=47.8 pwm=1.000 mainboard: temp=35.8 pi: temp=52.6 sysload=0.50 cputime=16.518 memavail=3395168 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.0 pwm=0.000
Stats 1011.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8374 bytes_read=150945 bytes_retransmit=9 bytes_invalid=0 send_seq=1119 receive_seq=1119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=48.0 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.46 cputime=16.536 memavail=3395176 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.1 pwm=0.000
Stats 1012.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8380 bytes_read=151122 bytes_retransmit=9 bytes_invalid=0 send_seq=1120 receive_seq=1120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=48.3 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.46 cputime=16.554 memavail=3395184 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.2 pwm=0.000
Stats 1013.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8386 bytes_read=151285 bytes_retransmit=9 bytes_invalid=0 send_seq=1121 receive_seq=1121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006899  heater_bed: target=75 temp=48.5 pwm=1.000 mainboard: temp=35.9 pi: temp=53.1 sysload=0.46 cputime=16.568 memavail=3393728 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.3 pwm=0.000
Stats 1014.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8408 bytes_read=151438 bytes_retransmit=9 bytes_invalid=0 send_seq=1123 receive_seq=1123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006890  heater_bed: target=75 temp=48.7 pwm=1.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.46 cputime=16.578 memavail=3393256 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.4 pwm=0.000
Stats 1015.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8414 bytes_read=151629 bytes_retransmit=9 bytes_invalid=0 send_seq=1124 receive_seq=1124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006912  heater_bed: target=75 temp=49.0 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.46 cputime=16.588 memavail=3393256 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.5 pwm=0.000
Stats 1016.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8420 bytes_read=151792 bytes_retransmit=9 bytes_invalid=0 send_seq=1125 receive_seq=1125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=49.2 pwm=1.000 mainboard: temp=36.0 pi: temp=54.0 sysload=0.42 cputime=16.598 memavail=3394884 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.6 pwm=0.000
Stats 1017.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8426 bytes_read=151940 bytes_retransmit=9 bytes_invalid=0 send_seq=1126 receive_seq=1126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=49.4 pwm=1.000 mainboard: temp=36.1 pi: temp=54.0 sysload=0.42 cputime=16.608 memavail=3395020 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.7 pwm=0.000
Stats 1018.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8448 bytes_read=152122 bytes_retransmit=9 bytes_invalid=0 send_seq=1128 receive_seq=1128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006887  heater_bed: target=75 temp=49.7 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.42 cputime=16.622 memavail=3393844 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.8 pwm=0.000
Stats 1019.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8454 bytes_read=152285 bytes_retransmit=9 bytes_invalid=0 send_seq=1129 receive_seq=1129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006892  heater_bed: target=75 temp=49.9 pwm=1.000 mainboard: temp=35.9 pi: temp=53.1 sysload=0.42 cputime=16.640 memavail=3393844 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.9 pwm=0.000
Stats 1020.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8460 bytes_read=152447 bytes_retransmit=9 bytes_invalid=0 send_seq=1130 receive_seq=1130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006892  heater_bed: target=75 temp=50.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.42 cputime=16.658 memavail=3393844 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.0 pwm=0.000
Stats 1021.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8466 bytes_read=152617 bytes_retransmit=9 bytes_invalid=0 send_seq=1131 receive_seq=1131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=50.4 pwm=1.000 mainboard: temp=35.8 pi: temp=53.6 sysload=0.47 cputime=16.677 memavail=3394584 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.1 pwm=0.000
Stats 1022.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8472 bytes_read=152780 bytes_retransmit=9 bytes_invalid=0 send_seq=1132 receive_seq=1132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=50.6 pwm=1.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.47 cputime=16.696 memavail=3394600 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.1 pwm=0.000
Stats 1023.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8494 bytes_read=152933 bytes_retransmit=9 bytes_invalid=0 send_seq=1134 receive_seq=1134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006884  heater_bed: target=75 temp=50.8 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.47 cputime=16.713 memavail=3397696 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.2 pwm=0.000
Stats 1024.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8500 bytes_read=153110 bytes_retransmit=9 bytes_invalid=0 send_seq=1135 receive_seq=1135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006876  heater_bed: target=75 temp=51.0 pwm=1.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.47 cputime=16.723 memavail=3396940 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.3 pwm=0.000
Stats 1025.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8506 bytes_read=153287 bytes_retransmit=9 bytes_invalid=0 send_seq=1136 receive_seq=1136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006868  heater_bed: target=75 temp=51.2 pwm=1.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.47 cputime=16.734 memavail=3396948 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.4 pwm=0.000
Stats 1026.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8512 bytes_read=153435 bytes_retransmit=9 bytes_invalid=0 send_seq=1137 receive_seq=1137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006858  heater_bed: target=75 temp=51.4 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.43 cputime=16.743 memavail=3396948 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.5 pwm=0.000
Stats 1027.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8534 bytes_read=153617 bytes_retransmit=9 bytes_invalid=0 send_seq=1139 receive_seq=1139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006849  heater_bed: target=75 temp=51.7 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.43 cputime=16.754 memavail=3396948 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.6 pwm=0.000
Stats 1028.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8540 bytes_read=153780 bytes_retransmit=9 bytes_invalid=0 send_seq=1140 receive_seq=1140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=51.9 pwm=1.000 mainboard: temp=36.0 pi: temp=54.5 sysload=0.43 cputime=16.768 memavail=3396276 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.7 pwm=0.000
Stats 1029.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8546 bytes_read=153928 bytes_retransmit=9 bytes_invalid=0 send_seq=1141 receive_seq=1141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006915  heater_bed: target=75 temp=52.1 pwm=1.000 mainboard: temp=36.1 pi: temp=53.6 sysload=0.43 cputime=16.786 memavail=3396276 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.8 pwm=0.000
Stats 1030.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8552 bytes_read=154134 bytes_retransmit=9 bytes_invalid=0 send_seq=1142 receive_seq=1142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006918  heater_bed: target=75 temp=52.4 pwm=1.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.43 cputime=16.806 memavail=3396276 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.9 pwm=0.000
Stats 1031.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8574 bytes_read=154284 bytes_retransmit=9 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006918  heater_bed: target=75 temp=52.5 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.39 cputime=16.825 memavail=3396276 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.0 pwm=0.000
Stats 1032.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8580 bytes_read=154443 bytes_retransmit=9 bytes_invalid=0 send_seq=1145 receive_seq=1145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006919  heater_bed: target=75 temp=52.8 pwm=1.000 mainboard: temp=35.9 pi: temp=53.6 sysload=0.39 cputime=16.842 memavail=3396276 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.1 pwm=0.000
Stats 1033.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8592 bytes_read=154636 bytes_retransmit=9 bytes_invalid=0 send_seq=1147 receive_seq=1147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006926  heater_bed: target=75 temp=53.0 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.39 cputime=16.860 memavail=3395588 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.1 pwm=0.000
Stats 1034.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8598 bytes_read=154784 bytes_retransmit=9 bytes_invalid=0 send_seq=1148 receive_seq=1148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006930  heater_bed: target=75 temp=53.2 pwm=1.000 mainboard: temp=36.1 pi: temp=51.6 sysload=0.39 cputime=16.877 memavail=3394832 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.2 pwm=0.000
Stats 1035.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8620 bytes_read=154966 bytes_retransmit=9 bytes_invalid=0 send_seq=1150 receive_seq=1150 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006930  heater_bed: target=75 temp=53.4 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.39 cputime=16.894 memavail=3395092 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.3 pwm=0.000
Stats 1036.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8626 bytes_read=155143 bytes_retransmit=9 bytes_invalid=0 send_seq=1151 receive_seq=1151 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006931  heater_bed: target=75 temp=53.7 pwm=1.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.36 cputime=16.912 memavail=3395536 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.4 pwm=0.000
Stats 1037.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8632 bytes_read=155291 bytes_retransmit=9 bytes_invalid=0 send_seq=1152 receive_seq=1152 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006929  heater_bed: target=75 temp=53.8 pwm=1.000 mainboard: temp=35.8 pi: temp=53.1 sysload=0.36 cputime=16.930 memavail=3395372 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.5 pwm=0.000
Stats 1038.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8638 bytes_read=155454 bytes_retransmit=9 bytes_invalid=0 send_seq=1153 receive_seq=1153 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006919  heater_bed: target=75 temp=54.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.36 cputime=16.943 memavail=3398904 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.6 pwm=0.000
Stats 1039.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8655 bytes_read=155631 bytes_retransmit=9 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006910  heater_bed: target=75 temp=54.3 pwm=1.000 mainboard: temp=36.0 pi: temp=53.6 sysload=0.36 cputime=16.953 memavail=3398656 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.7 pwm=0.000
Stats 1040.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8661 bytes_read=155793 bytes_retransmit=9 bytes_invalid=0 send_seq=1155 receive_seq=1155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006899  heater_bed: target=75 temp=54.5 pwm=1.000 mainboard: temp=36.0 pi: temp=53.6 sysload=0.36 cputime=16.963 memavail=3398656 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.8 pwm=0.000
Stats 1041.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8667 bytes_read=155956 bytes_retransmit=9 bytes_invalid=0 send_seq=1156 receive_seq=1156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=54.7 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.33 cputime=16.973 memavail=3398436 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.9 pwm=0.000
Stats 1042.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8673 bytes_read=156125 bytes_retransmit=9 bytes_invalid=0 send_seq=1157 receive_seq=1157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006883  heater_bed: target=75 temp=54.9 pwm=1.000 mainboard: temp=35.8 pi: temp=53.6 sysload=0.33 cputime=16.983 memavail=3398476 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.0 pwm=0.000
Stats 1043.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8679 bytes_read=156273 bytes_retransmit=9 bytes_invalid=0 send_seq=1158 receive_seq=1158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006885  heater_bed: target=75 temp=55.1 pwm=1.000 mainboard: temp=35.9 pi: temp=53.6 sysload=0.33 cputime=16.997 memavail=3397776 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.1 pwm=0.000
Stats 1044.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8701 bytes_read=156441 bytes_retransmit=9 bytes_invalid=0 send_seq=1160 receive_seq=1160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006888  heater_bed: target=75 temp=55.4 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.33 cputime=17.016 memavail=3397020 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.1 pwm=0.000
Stats 1045.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8707 bytes_read=156632 bytes_retransmit=9 bytes_invalid=0 send_seq=1161 receive_seq=1161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006889  heater_bed: target=75 temp=55.5 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.33 cputime=17.034 memavail=3397020 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.3 pwm=0.000
Stats 1046.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8713 bytes_read=156780 bytes_retransmit=9 bytes_invalid=0 send_seq=1162 receive_seq=1162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=55.7 pwm=1.000 mainboard: temp=36.0 pi: temp=53.6 sysload=0.31 cputime=17.052 memavail=3397020 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.4 pwm=0.000
Stats 1047.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8719 bytes_read=156943 bytes_retransmit=9 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006899  heater_bed: target=75 temp=55.9 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.31 cputime=17.070 memavail=3396776 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.4 pwm=0.000
Stats 1048.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8741 bytes_read=157125 bytes_retransmit=9 bytes_invalid=0 send_seq=1165 receive_seq=1165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006906  heater_bed: target=75 temp=56.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.31 cputime=17.087 memavail=3396328 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.5 pwm=0.000
Stats 1049.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8747 bytes_read=157273 bytes_retransmit=9 bytes_invalid=0 send_seq=1166 receive_seq=1166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006908  heater_bed: target=75 temp=56.3 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.31 cputime=17.105 memavail=3396328 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.6 pwm=0.000
Stats 1050.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8753 bytes_read=157450 bytes_retransmit=9 bytes_invalid=0 send_seq=1167 receive_seq=1167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006937  heater_bed: target=75 temp=56.6 pwm=1.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.31 cputime=17.122 memavail=3396328 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.7 pwm=0.000
Stats 1051.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8759 bytes_read=157627 bytes_retransmit=9 bytes_invalid=0 send_seq=1168 receive_seq=1168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006962  heater_bed: target=75 temp=56.8 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.36 cputime=17.140 memavail=3396328 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.8 pwm=0.000
Stats 1052.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8781 bytes_read=157780 bytes_retransmit=9 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006960  heater_bed: target=75 temp=56.9 pwm=1.000 mainboard: temp=35.9 pi: temp=53.1 sysload=0.36 cputime=17.158 memavail=3396328 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.9 pwm=0.000
Stats 1053.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8787 bytes_read=157934 bytes_retransmit=9 bytes_invalid=0 send_seq=1171 receive_seq=1171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006947  heater_bed: target=75 temp=57.2 pwm=1.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.36 cputime=17.172 memavail=3396080 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.0 pwm=0.000
Stats 1054.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8793 bytes_read=158111 bytes_retransmit=9 bytes_invalid=0 send_seq=1172 receive_seq=1172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006930  heater_bed: target=75 temp=57.3 pwm=1.000 mainboard: temp=35.8 pi: temp=53.6 sysload=0.36 cputime=17.182 memavail=3396020 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.1 pwm=0.000
Stats 1055.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8799 bytes_read=158273 bytes_retransmit=9 bytes_invalid=0 send_seq=1173 receive_seq=1173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006918  heater_bed: target=75 temp=57.5 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.36 cputime=17.191 memavail=3396080 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.1 pwm=0.000
Stats 1056.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8821 bytes_read=158441 bytes_retransmit=9 bytes_invalid=0 send_seq=1175 receive_seq=1175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006909  heater_bed: target=75 temp=57.8 pwm=1.000 mainboard: temp=36.0 pi: temp=54.0 sysload=0.33 cputime=17.202 memavail=3396084 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.3 pwm=0.000
Stats 1057.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8827 bytes_read=158618 bytes_retransmit=9 bytes_invalid=0 send_seq=1176 receive_seq=1176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=57.9 pwm=1.000 mainboard: temp=36.1 pi: temp=52.6 sysload=0.33 cputime=17.213 memavail=3396108 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.4 pwm=0.000
Stats 1058.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8833 bytes_read=158766 bytes_retransmit=9 bytes_invalid=0 send_seq=1177 receive_seq=1177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006941  heater_bed: target=75 temp=58.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.33 cputime=17.227 memavail=3395868 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.4 pwm=0.000
Stats 1059.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8839 bytes_read=158929 bytes_retransmit=9 bytes_invalid=0 send_seq=1178 receive_seq=1178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006938  heater_bed: target=75 temp=58.4 pwm=1.000 mainboard: temp=35.9 pi: temp=53.1 sysload=0.33 cputime=17.246 memavail=3395868 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.5 pwm=0.000
Stats 1060.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8861 bytes_read=159125 bytes_retransmit=9 bytes_invalid=0 send_seq=1180 receive_seq=1180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006936  heater_bed: target=75 temp=58.5 pwm=1.000 mainboard: temp=35.9 pi: temp=53.6 sysload=0.33 cputime=17.268 memavail=3395868 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.6 pwm=0.000
Stats 1061.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8867 bytes_read=159273 bytes_retransmit=9 bytes_invalid=0 send_seq=1181 receive_seq=1181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006931  heater_bed: target=75 temp=58.7 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.31 cputime=17.290 memavail=3395868 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.7 pwm=0.000
Stats 1062.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8873 bytes_read=159436 bytes_retransmit=9 bytes_invalid=0 send_seq=1182 receive_seq=1182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006935  heater_bed: target=75 temp=58.9 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.31 cputime=17.313 memavail=3395868 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.7 pwm=0.000
Stats 1063.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8879 bytes_read=159610 bytes_retransmit=9 bytes_invalid=0 send_seq=1183 receive_seq=1183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006929  heater_bed: target=75 temp=59.1 pwm=1.000 mainboard: temp=36.2 pi: temp=52.6 sysload=0.31 cputime=17.327 memavail=3395876 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.9 pwm=0.000
Stats 1064.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8885 bytes_read=159754 bytes_retransmit=9 bytes_invalid=0 send_seq=1184 receive_seq=1184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006915  heater_bed: target=75 temp=59.3 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.31 cputime=17.337 memavail=3395120 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.0 pwm=0.000
Stats 1065.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8907 bytes_read=159936 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006911  heater_bed: target=75 temp=59.5 pwm=1.000 mainboard: temp=35.9 pi: temp=54.0 sysload=0.31 cputime=17.347 memavail=3395120 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.0 pwm=0.000
Stats 1066.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8913 bytes_read=160113 bytes_retransmit=9 bytes_invalid=0 send_seq=1187 receive_seq=1187 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=59.7 pwm=1.000 mainboard: temp=36.0 pi: temp=53.6 sysload=0.36 cputime=17.356 memavail=3395860 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.1 pwm=0.000
Stats 1067.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8919 bytes_read=160261 bytes_retransmit=9 bytes_invalid=0 send_seq=1188 receive_seq=1188 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=59.8 pwm=1.000 mainboard: temp=35.9 pi: temp=54.0 sysload=0.36 cputime=17.365 memavail=3395876 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.2 pwm=0.000
Stats 1068.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8925 bytes_read=160424 bytes_retransmit=9 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006878  heater_bed: target=75 temp=60.1 pwm=1.000 mainboard: temp=35.9 pi: temp=54.0 sysload=0.36 cputime=17.379 memavail=3395624 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.3 pwm=0.000
Stats 1069.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8947 bytes_read=160606 bytes_retransmit=9 bytes_invalid=0 send_seq=1191 receive_seq=1191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006901  heater_bed: target=75 temp=60.2 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.36 cputime=17.398 memavail=3395624 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.4 pwm=0.000
Stats 1070.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8953 bytes_read=160768 bytes_retransmit=9 bytes_invalid=0 send_seq=1192 receive_seq=1192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006912  heater_bed: target=75 temp=60.4 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.36 cputime=17.416 memavail=3395624 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.5 pwm=0.000
Stats 1071.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8959 bytes_read=160931 bytes_retransmit=9 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006911  heater_bed: target=75 temp=60.6 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.33 cputime=17.434 memavail=3395624 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.6 pwm=0.000
Stats 1072.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8965 bytes_read=161108 bytes_retransmit=9 bytes_invalid=0 send_seq=1194 receive_seq=1194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006908  heater_bed: target=75 temp=60.8 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.33 cputime=17.451 memavail=3395632 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.6 pwm=0.000
Stats 1073.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8987 bytes_read=161261 bytes_retransmit=9 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006910  heater_bed: target=75 temp=61.0 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.33 cputime=17.469 memavail=3395632 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.7 pwm=0.000
Stats 1074.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8993 bytes_read=161420 bytes_retransmit=9 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006917  heater_bed: target=75 temp=61.2 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.33 cputime=17.487 memavail=3395780 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.8 pwm=0.000
Stats 1075.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=8999 bytes_read=161608 bytes_retransmit=9 bytes_invalid=0 send_seq=1198 receive_seq=1198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006912  heater_bed: target=75 temp=61.4 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.33 cputime=17.505 memavail=3395884 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.9 pwm=0.000
Stats 1076.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9005 bytes_read=161756 bytes_retransmit=9 bytes_invalid=0 send_seq=1199 receive_seq=1199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006916  heater_bed: target=75 temp=61.5 pwm=1.000 mainboard: temp=36.1 pi: temp=52.6 sysload=0.31 cputime=17.522 memavail=3396624 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.0 pwm=0.000
Stats 1077.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9027 bytes_read=161924 bytes_retransmit=9 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006914  heater_bed: target=75 temp=61.7 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.31 cputime=17.540 memavail=3396648 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.1 pwm=0.000
Stats 1078.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9033 bytes_read=162101 bytes_retransmit=9 bytes_invalid=0 send_seq=1202 receive_seq=1202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006937  heater_bed: target=75 temp=61.9 pwm=1.000 mainboard: temp=36.1 pi: temp=52.6 sysload=0.31 cputime=17.555 memavail=3395696 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.2 pwm=0.000
Stats 1079.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9039 bytes_read=162249 bytes_retransmit=9 bytes_invalid=0 send_seq=1203 receive_seq=1203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006931  heater_bed: target=75 temp=62.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.31 cputime=17.564 memavail=3395696 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.2 pwm=0.000
Stats 1080.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9045 bytes_read=162426 bytes_retransmit=9 bytes_invalid=0 send_seq=1204 receive_seq=1204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006927  heater_bed: target=75 temp=62.3 pwm=1.000 mainboard: temp=36.0 pi: temp=53.6 sysload=0.31 cputime=17.574 memavail=3395700 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.3 pwm=0.000
Stats 1081.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9067 bytes_read=162608 bytes_retransmit=9 bytes_invalid=0 send_seq=1206 receive_seq=1206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006917  heater_bed: target=75 temp=62.5 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.28 cputime=17.585 memavail=3395700 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.4 pwm=0.000
Stats 1082.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9073 bytes_read=162756 bytes_retransmit=9 bytes_invalid=0 send_seq=1207 receive_seq=1207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006911  heater_bed: target=75 temp=62.6 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.28 cputime=17.594 memavail=3395700 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.5 pwm=0.000
Stats 1083.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9079 bytes_read=162919 bytes_retransmit=9 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006902  heater_bed: target=75 temp=62.8 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.28 cputime=17.607 memavail=3395000 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.6 pwm=0.000
Stats 1084.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9085 bytes_read=163096 bytes_retransmit=9 bytes_invalid=0 send_seq=1209 receive_seq=1209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006910  heater_bed: target=75 temp=63.0 pwm=1.000 mainboard: temp=36.1 pi: temp=53.6 sysload=0.28 cputime=17.626 memavail=3395148 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.7 pwm=0.000
Stats 1085.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9091 bytes_read=163252 bytes_retransmit=9 bytes_invalid=0 send_seq=1210 receive_seq=1210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006914  heater_bed: target=75 temp=63.2 pwm=1.000 mainboard: temp=36.0 pi: temp=53.6 sysload=0.28 cputime=17.643 memavail=3395508 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.8 pwm=0.000
Stats 1086.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9113 bytes_read=163419 bytes_retransmit=9 bytes_invalid=0 send_seq=1212 receive_seq=1212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=63.4 pwm=1.000 mainboard: temp=36.1 pi: temp=52.6 sysload=0.26 cputime=17.661 memavail=3395508 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.9 pwm=0.000
Stats 1087.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9119 bytes_read=163596 bytes_retransmit=9 bytes_invalid=0 send_seq=1213 receive_seq=1213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006902  heater_bed: target=75 temp=63.6 pwm=1.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.26 cputime=17.679 memavail=3395508 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.0 pwm=0.000
Stats 1088.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9125 bytes_read=163744 bytes_retransmit=9 bytes_invalid=0 send_seq=1214 receive_seq=1214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006902  heater_bed: target=75 temp=63.7 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.26 cputime=17.697 memavail=3399468 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.0 pwm=0.000
Stats 1089.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9131 bytes_read=163907 bytes_retransmit=9 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=63.9 pwm=1.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.26 cputime=17.714 memavail=3399468 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.1 pwm=0.000
Stats 1090.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9153 bytes_read=164103 bytes_retransmit=9 bytes_invalid=0 send_seq=1217 receive_seq=1217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=64.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.26 cputime=17.733 memavail=3399488 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.2 pwm=0.000
Stats 1091.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9159 bytes_read=164251 bytes_retransmit=9 bytes_invalid=0 send_seq=1218 receive_seq=1218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006898  heater_bed: target=75 temp=64.2 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.32 cputime=17.750 memavail=3399492 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.3 pwm=0.000
Stats 1092.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9165 bytes_read=164414 bytes_retransmit=9 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006897  heater_bed: target=75 temp=64.4 pwm=1.000 mainboard: temp=35.9 pi: temp=53.6 sysload=0.32 cputime=17.767 memavail=3399492 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.4 pwm=0.000
Stats 1093.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9171 bytes_read=164591 bytes_retransmit=9 bytes_invalid=0 send_seq=1220 receive_seq=1220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=64.6 pwm=1.000 mainboard: temp=36.1 pi: temp=53.6 sysload=0.32 cputime=17.784 memavail=3399268 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.5 pwm=0.000
Stats 1094.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9199 bytes_read=164760 bytes_retransmit=9 bytes_invalid=0 send_seq=1223 receive_seq=1223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006901  heater_bed: target=75 temp=64.8 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.32 cputime=17.802 memavail=3398520 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.6 pwm=0.000
Stats 1095.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9205 bytes_read=164937 bytes_retransmit=9 bytes_invalid=0 send_seq=1224 receive_seq=1224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006906  heater_bed: target=75 temp=65.0 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.32 cputime=17.820 memavail=3398520 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.6 pwm=0.000
Stats 1096.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9211 bytes_read=165106 bytes_retransmit=9 bytes_invalid=0 send_seq=1225 receive_seq=1225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006902  heater_bed: target=75 temp=65.2 pwm=1.000 mainboard: temp=36.2 pi: temp=51.6 sysload=0.29 cputime=17.836 memavail=3398520 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.8 pwm=0.000
Stats 1097.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9217 bytes_read=165254 bytes_retransmit=9 bytes_invalid=0 send_seq=1226 receive_seq=1226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006909  heater_bed: target=75 temp=65.3 pwm=1.000 mainboard: temp=35.9 pi: temp=52.1 sysload=0.29 cputime=17.854 memavail=3398520 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.8 pwm=0.000
Stats 1098.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9239 bytes_read=165422 bytes_retransmit=9 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006912  heater_bed: target=75 temp=65.5 pwm=1.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.29 cputime=17.873 memavail=3401580 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.9 pwm=0.000
Stats 1099.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9245 bytes_read=165599 bytes_retransmit=9 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006910  heater_bed: target=75 temp=65.6 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.29 cputime=17.892 memavail=3401588 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.0 pwm=0.000
Stats 1100.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9251 bytes_read=165761 bytes_retransmit=9 bytes_invalid=0 send_seq=1230 receive_seq=1230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006912  heater_bed: target=75 temp=65.8 pwm=1.000 mainboard: temp=36.1 pi: temp=53.6 sysload=0.29 cputime=17.910 memavail=3401588 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.1 pwm=0.000
Stats 1101.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9257 bytes_read=165924 bytes_retransmit=9 bytes_invalid=0 send_seq=1231 receive_seq=1231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006913  heater_bed: target=75 temp=66.0 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.27 cputime=17.928 memavail=3401588 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.2 pwm=0.000
Stats 1102.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9274 bytes_read=166101 bytes_retransmit=9 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006908  heater_bed: target=75 temp=66.2 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.27 cputime=17.947 memavail=3401588 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.3 pwm=0.000
Stats 1103.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9280 bytes_read=166249 bytes_retransmit=9 bytes_invalid=0 send_seq=1233 receive_seq=1233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006912  heater_bed: target=75 temp=66.3 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.27 cputime=17.961 memavail=3401140 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.4 pwm=0.000
Stats 1104.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9286 bytes_read=166426 bytes_retransmit=9 bytes_invalid=0 send_seq=1234 receive_seq=1234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006901  heater_bed: target=75 temp=66.5 pwm=1.000 mainboard: temp=36.0 pi: temp=54.0 sysload=0.27 cputime=17.971 memavail=3400904 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.4 pwm=0.000
Stats 1105.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9292 bytes_read=166603 bytes_retransmit=9 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006892  heater_bed: target=75 temp=66.7 pwm=1.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.27 cputime=17.982 memavail=3400904 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.5 pwm=0.000
Stats 1106.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9298 bytes_read=166748 bytes_retransmit=9 bytes_invalid=0 send_seq=1236 receive_seq=1236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006887  heater_bed: target=75 temp=66.8 pwm=1.000 mainboard: temp=36.2 pi: temp=53.1 sysload=0.25 cputime=17.992 memavail=3400904 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.6 pwm=0.000
Stats 1107.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9320 bytes_read=166926 bytes_retransmit=9 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006877  heater_bed: target=75 temp=67.1 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.25 cputime=18.002 memavail=3400904 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.7 pwm=0.000
Stats 1108.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9326 bytes_read=167089 bytes_retransmit=9 bytes_invalid=0 send_seq=1239 receive_seq=1239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006883  heater_bed: target=75 temp=67.2 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.25 cputime=18.017 memavail=3400680 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.8 pwm=0.000
Stats 1109.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9332 bytes_read=167237 bytes_retransmit=9 bytes_invalid=0 send_seq=1240 receive_seq=1240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=67.3 pwm=1.000 mainboard: temp=35.9 pi: temp=52.6 sysload=0.25 cputime=18.034 memavail=3400428 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.8 pwm=0.000
Stats 1110.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9338 bytes_read=167428 bytes_retransmit=9 bytes_invalid=0 send_seq=1241 receive_seq=1241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=67.5 pwm=1.000 mainboard: temp=36.2 pi: temp=52.6 sysload=0.25 cputime=18.054 memavail=3400428 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000
Stats 1111.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9360 bytes_read=167596 bytes_retransmit=9 bytes_invalid=0 send_seq=1243 receive_seq=1243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006909  heater_bed: target=75 temp=67.7 pwm=1.000 mainboard: temp=36.1 pi: temp=52.6 sysload=0.23 cputime=18.074 memavail=3400428 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000
Stats 1112.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9366 bytes_read=167744 bytes_retransmit=9 bytes_invalid=0 send_seq=1244 receive_seq=1244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006910  heater_bed: target=75 temp=67.8 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.23 cputime=18.092 memavail=3400428 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.1 pwm=0.000
Stats 1113.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9388 bytes_read=167926 bytes_retransmit=9 bytes_invalid=0 send_seq=1246 receive_seq=1246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006916  heater_bed: target=75 temp=68.0 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.23 cputime=18.111 memavail=3400176 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000
Stats 1114.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9394 bytes_read=168089 bytes_retransmit=9 bytes_invalid=0 send_seq=1247 receive_seq=1247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006946  heater_bed: target=75 temp=68.2 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.23 cputime=18.129 memavail=3399924 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 1115.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9416 bytes_read=168256 bytes_retransmit=9 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006945  heater_bed: target=75 temp=68.3 pwm=1.000 mainboard: temp=36.0 pi: temp=52.6 sysload=0.23 cputime=18.148 memavail=3399928 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 1116.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9422 bytes_read=168433 bytes_retransmit=9 bytes_invalid=0 send_seq=1250 receive_seq=1250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006942  heater_bed: target=75 temp=68.5 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.21 cputime=18.166 memavail=3399928 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 1117.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9428 bytes_read=168590 bytes_retransmit=9 bytes_invalid=0 send_seq=1251 receive_seq=1251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006937  heater_bed: target=75 temp=68.7 pwm=1.000 mainboard: temp=36.0 pi: temp=52.1 sysload=0.21 cputime=18.185 memavail=3399928 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.5 pwm=0.000
Stats 1118.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9434 bytes_read=168738 bytes_retransmit=9 bytes_invalid=0 send_seq=1252 receive_seq=1252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006922  heater_bed: target=75 temp=68.8 pwm=1.000 mainboard: temp=36.0 pi: temp=53.6 sysload=0.21 cputime=18.198 memavail=3399928 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
Stats 1119.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9456 bytes_read=168920 bytes_retransmit=9 bytes_invalid=0 send_seq=1254 receive_seq=1254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006910  heater_bed: target=75 temp=69.0 pwm=1.000 mainboard: temp=36.1 pi: temp=53.1 sysload=0.21 cputime=18.208 memavail=3399928 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
Stats 1120.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9462 bytes_read=169097 bytes_retransmit=9 bytes_invalid=0 send_seq=1255 receive_seq=1255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006898  heater_bed: target=75 temp=69.1 pwm=1.000 mainboard: temp=36.1 pi: temp=52.1 sysload=0.21 cputime=18.218 memavail=3399928 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000
Stats 1121.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9468 bytes_read=169245 bytes_retransmit=9 bytes_invalid=0 send_seq=1256 receive_seq=1256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006895  heater_bed: target=75 temp=69.3 pwm=1.000 mainboard: temp=36.0 pi: temp=53.1 sysload=0.27 cputime=18.229 memavail=3401816 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
Stats 1122.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9490 bytes_read=169427 bytes_retransmit=9 bytes_invalid=0 send_seq=1258 receive_seq=1258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006895  heater_bed: target=75 temp=69.5 pwm=0.858 mainboard: temp=36.2 pi: temp=52.6 sysload=0.27 cputime=18.240 memavail=3401816 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000
Stats 1123.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9512 bytes_read=169595 bytes_retransmit=9 bytes_invalid=0 send_seq=1260 receive_seq=1260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=69.6 pwm=1.000 mainboard: temp=36.2 pi: temp=53.6 sysload=0.27 cputime=18.255 memavail=3400680 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 1124.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9534 bytes_read=169748 bytes_retransmit=9 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006899  heater_bed: target=75 temp=69.8 pwm=0.903 mainboard: temp=36.0 pi: temp=53.6 sysload=0.27 cputime=18.274 memavail=3400428 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 1125.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9556 bytes_read=169944 bytes_retransmit=9 bytes_invalid=0 send_seq=1264 receive_seq=1264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=69.9 pwm=0.959 mainboard: temp=36.0 pi: temp=53.6 sysload=0.27 cputime=18.294 memavail=3399952 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000
Stats 1126.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9578 bytes_read=170112 bytes_retransmit=9 bytes_invalid=0 send_seq=1266 receive_seq=1266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006897  heater_bed: target=75 temp=70.1 pwm=0.900 mainboard: temp=36.0 pi: temp=52.1 sysload=0.33 cputime=18.312 memavail=3399952 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000
Heater heater_bed within range of 75.000
Stats 1127.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9611 bytes_read=170265 bytes_retransmit=9 bytes_invalid=0 send_seq=1268 receive_seq=1268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=70.2 pwm=0.885 mainboard: temp=36.1 pi: temp=53.1 sysload=0.33 cputime=18.330 memavail=3399952 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 1128.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9633 bytes_read=170441 bytes_retransmit=9 bytes_invalid=0 send_seq=1270 receive_seq=1270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006899  heater_bed: target=75 temp=70.3 pwm=0.951 mainboard: temp=35.9 pi: temp=52.6 sysload=0.33 cputime=18.349 memavail=3399700 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 1129.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9687 bytes_read=170619 bytes_retransmit=9 bytes_invalid=0 send_seq=1274 receive_seq=1274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006898  heater_bed: target=75 temp=70.5 pwm=0.965 mainboard: temp=36.1 pi: temp=52.6 sysload=0.33 cputime=18.368 memavail=3399712 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
Stats 1130.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9693 bytes_read=170781 bytes_retransmit=9 bytes_invalid=0 send_seq=1275 receive_seq=1275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=70.6 pwm=0.965 mainboard: temp=36.0 pi: temp=52.6 sysload=0.33 cputime=18.385 memavail=3399712 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000
Stats 1131.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9715 bytes_read=170963 bytes_retransmit=9 bytes_invalid=0 send_seq=1277 receive_seq=1277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006897  heater_bed: target=75 temp=70.8 pwm=0.841 mainboard: temp=36.1 pi: temp=52.6 sysload=0.38 cputime=18.404 memavail=3399712 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000
Stats 1132.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9753 bytes_read=171136 bytes_retransmit=9 bytes_invalid=0 send_seq=1280 receive_seq=1280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006921  heater_bed: target=75 temp=70.9 pwm=0.820 mainboard: temp=36.1 pi: temp=53.1 sysload=0.38 cputime=18.423 memavail=3399712 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000
Stats 1133.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9807 bytes_read=171299 bytes_retransmit=9 bytes_invalid=0 send_seq=1284 receive_seq=1284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006920  heater_bed: target=75 temp=71.0 pwm=0.955 mainboard: temp=36.1 pi: temp=52.1 sysload=0.38 cputime=18.438 memavail=3399712 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 1134.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9829 bytes_read=171481 bytes_retransmit=9 bytes_invalid=0 send_seq=1286 receive_seq=1286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006908  heater_bed: target=75 temp=71.2 pwm=0.858 mainboard: temp=36.0 pi: temp=53.1 sysload=0.38 cputime=18.448 memavail=3399460 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000
Stats 1135.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9867 bytes_read=171668 bytes_retransmit=9 bytes_invalid=0 send_seq=1289 receive_seq=1289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=71.3 pwm=0.848 mainboard: temp=36.0 pi: temp=53.6 sysload=0.38 cputime=18.459 memavail=3399472 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 1136.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9889 bytes_read=171821 bytes_retransmit=9 bytes_invalid=0 send_seq=1291 receive_seq=1291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=71.4 pwm=0.945 mainboard: temp=36.1 pi: temp=53.1 sysload=0.35 cputime=18.469 memavail=3399620 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 1137.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9943 bytes_read=172013 bytes_retransmit=9 bytes_invalid=0 send_seq=1295 receive_seq=1295 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006870  heater_bed: target=75 temp=71.5 pwm=0.753 mainboard: temp=36.1 pi: temp=54.0 sysload=0.35 cputime=18.480 memavail=3399724 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 1138.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9981 bytes_read=172185 bytes_retransmit=9 bytes_invalid=0 send_seq=1298 receive_seq=1298 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006862  heater_bed: target=75 temp=71.6 pwm=0.860 mainboard: temp=36.1 pi: temp=53.1 sysload=0.35 cputime=18.496 memavail=3398788 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 1139.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10019 bytes_read=172336 bytes_retransmit=9 bytes_invalid=0 send_seq=1301 receive_seq=1301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006864  heater_bed: target=75 temp=71.7 pwm=0.850 mainboard: temp=36.1 pi: temp=53.1 sysload=0.35 cputime=18.515 memavail=3398792 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000
Stats 1140.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10089 bytes_read=172547 bytes_retransmit=9 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006868  heater_bed: target=75 temp=71.9 pwm=0.831 mainboard: temp=36.0 pi: temp=52.6 sysload=0.35 cputime=18.537 memavail=3398792 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000
Stats 1141.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10111 bytes_read=172715 bytes_retransmit=9 bytes_invalid=0 send_seq=1308 receive_seq=1308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006874  heater_bed: target=75 temp=72.0 pwm=0.753 mainboard: temp=36.1 pi: temp=53.1 sysload=0.41 cputime=18.556 memavail=3399532 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 1142.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10133 bytes_read=172868 bytes_retransmit=9 bytes_invalid=0 send_seq=1310 receive_seq=1310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006879  heater_bed: target=75 temp=72.1 pwm=0.875 mainboard: temp=36.3 pi: temp=53.1 sysload=0.41 cputime=18.575 memavail=3399548 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 1143.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10187 bytes_read=173060 bytes_retransmit=9 bytes_invalid=0 send_seq=1314 receive_seq=1314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=72.2 pwm=0.947 mainboard: temp=36.2 pi: temp=51.6 sysload=0.41 cputime=18.595 memavail=3403288 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 1144.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10209 bytes_read=173228 bytes_retransmit=9 bytes_invalid=0 send_seq=1316 receive_seq=1316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006883  heater_bed: target=75 temp=72.3 pwm=0.800 mainboard: temp=36.3 pi: temp=53.6 sysload=0.41 cputime=18.615 memavail=3403304 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000
Stats 1145.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10231 bytes_read=173395 bytes_retransmit=9 bytes_invalid=0 send_seq=1318 receive_seq=1318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006888  heater_bed: target=75 temp=72.4 pwm=0.901 mainboard: temp=36.1 pi: temp=53.6 sysload=0.41 cputime=18.634 memavail=3402568 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000
Stats 1146.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10269 bytes_read=173582 bytes_retransmit=9 bytes_invalid=0 send_seq=1321 receive_seq=1321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006884  heater_bed: target=75 temp=72.5 pwm=0.814 mainboard: temp=36.1 pi: temp=53.1 sysload=0.37 cputime=18.655 memavail=3402344 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.5 pwm=0.000
Stats 1147.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10323 bytes_read=173760 bytes_retransmit=9 bytes_invalid=0 send_seq=1325 receive_seq=1325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006884  heater_bed: target=75 temp=72.6 pwm=0.918 mainboard: temp=36.1 pi: temp=51.6 sysload=0.37 cputime=18.675 memavail=3402344 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.5 pwm=0.000
Stats 1148.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10345 bytes_read=173913 bytes_retransmit=9 bytes_invalid=0 send_seq=1327 receive_seq=1327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006879  heater_bed: target=75 temp=72.6 pwm=0.848 mainboard: temp=36.1 pi: temp=53.6 sysload=0.37 cputime=18.693 memavail=3401420 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 1149.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10383 bytes_read=174096 bytes_retransmit=9 bytes_invalid=0 send_seq=1330 receive_seq=1330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006878  heater_bed: target=75 temp=72.8 pwm=0.799 mainboard: temp=36.2 pi: temp=53.6 sysload=0.37 cputime=18.713 memavail=3401420 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 1150.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10405 bytes_read=174274 bytes_retransmit=9 bytes_invalid=0 send_seq=1332 receive_seq=1332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006877  heater_bed: target=75 temp=72.9 pwm=0.710 mainboard: temp=36.2 pi: temp=52.1 sysload=0.37 cputime=18.733 memavail=3401420 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 1151.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10411 bytes_read=174422 bytes_retransmit=9 bytes_invalid=0 send_seq=1333 receive_seq=1333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006882  heater_bed: target=75 temp=73.0 pwm=0.710 mainboard: temp=36.1 pi: temp=53.1 sysload=0.42 cputime=18.751 memavail=3401420 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000
Stats 1152.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10476 bytes_read=174614 bytes_retransmit=9 bytes_invalid=0 send_seq=1337 receive_seq=1337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006887  heater_bed: target=75 temp=73.1 pwm=0.740 mainboard: temp=36.0 pi: temp=53.6 sysload=0.42 cputime=18.772 memavail=3401420 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000
Stats 1153.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10530 bytes_read=174792 bytes_retransmit=9 bytes_invalid=0 send_seq=1341 receive_seq=1341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006886  heater_bed: target=75 temp=73.1 pwm=0.893 mainboard: temp=36.1 pi: temp=52.6 sysload=0.42 cputime=18.788 memavail=3400708 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 1154.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10552 bytes_read=174945 bytes_retransmit=9 bytes_invalid=0 send_seq=1343 receive_seq=1343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006875  heater_bed: target=75 temp=73.2 pwm=0.819 mainboard: temp=36.1 pi: temp=53.1 sysload=0.42 cputime=18.799 memavail=3400712 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 1155.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10580 bytes_read=175157 bytes_retransmit=9 bytes_invalid=0 send_seq=1346 receive_seq=1346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006856  heater_bed: target=75 temp=73.3 pwm=0.713 mainboard: temp=36.1 pi: temp=52.6 sysload=0.42 cputime=18.811 memavail=3400720 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 1156.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10618 bytes_read=175330 bytes_retransmit=9 bytes_invalid=0 send_seq=1349 receive_seq=1349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006850  heater_bed: target=75 temp=73.4 pwm=0.701 mainboard: temp=36.1 pi: temp=52.6 sysload=0.39 cputime=18.822 memavail=3400720 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 1157.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10640 bytes_read=175483 bytes_retransmit=9 bytes_invalid=0 send_seq=1351 receive_seq=1351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006842  heater_bed: target=75 temp=73.4 pwm=0.771 mainboard: temp=36.1 pi: temp=53.6 sysload=0.39 cputime=18.832 memavail=3400720 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000
Stats 1158.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10662 bytes_read=175665 bytes_retransmit=9 bytes_invalid=0 send_seq=1353 receive_seq=1353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006853  heater_bed: target=75 temp=73.6 pwm=0.620 mainboard: temp=36.1 pi: temp=53.6 sysload=0.39 cputime=18.847 memavail=3400048 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000
Stats 1159.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10716 bytes_read=175843 bytes_retransmit=9 bytes_invalid=0 send_seq=1357 receive_seq=1357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006849  heater_bed: target=75 temp=73.6 pwm=0.732 mainboard: temp=36.1 pi: temp=53.1 sysload=0.39 cputime=18.867 memavail=3400048 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000
Stats 1160.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10722 bytes_read=175998 bytes_retransmit=9 bytes_invalid=0 send_seq=1358 receive_seq=1358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852  heater_bed: target=75 temp=73.7 pwm=0.732 mainboard: temp=36.3 pi: temp=52.1 sysload=0.39 cputime=18.885 memavail=3400048 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000
Stats 1161.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10760 bytes_read=176184 bytes_retransmit=9 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006855  heater_bed: target=75 temp=73.8 pwm=0.786 mainboard: temp=36.2 pi: temp=52.1 sysload=0.36 cputime=18.905 memavail=3400060 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 1162.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10798 bytes_read=176357 bytes_retransmit=9 bytes_invalid=0 send_seq=1364 receive_seq=1364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006855  heater_bed: target=75 temp=73.8 pwm=0.828 mainboard: temp=36.2 pi: temp=52.6 sysload=0.36 cputime=18.924 memavail=3400060 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 1163.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10852 bytes_read=176520 bytes_retransmit=9 bytes_invalid=0 send_seq=1368 receive_seq=1368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006860  heater_bed: target=75 temp=73.9 pwm=0.655 mainboard: temp=36.0 pi: temp=52.6 sysload=0.36 cputime=18.943 memavail=3400060 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 1164.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10890 bytes_read=176707 bytes_retransmit=9 bytes_invalid=0 send_seq=1371 receive_seq=1371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006866  heater_bed: target=75 temp=74.0 pwm=0.633 mainboard: temp=36.1 pi: temp=53.6 sysload=0.36 cputime=18.962 memavail=3399808 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000
Stats 1165.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10912 bytes_read=176875 bytes_retransmit=9 bytes_invalid=0 send_seq=1373 receive_seq=1373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006867  heater_bed: target=75 temp=74.0 pwm=0.697 mainboard: temp=36.1 pi: temp=53.1 sysload=0.36 cputime=18.980 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000
Stats 1166.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10918 bytes_read=177037 bytes_retransmit=9 bytes_invalid=0 send_seq=1374 receive_seq=1374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006868  heater_bed: target=75 temp=74.1 pwm=0.697 mainboard: temp=36.3 pi: temp=52.6 sysload=0.33 cputime=18.998 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000
Stats 1167.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10956 bytes_read=177224 bytes_retransmit=9 bytes_invalid=0 send_seq=1377 receive_seq=1377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006871  heater_bed: target=75 temp=74.1 pwm=0.685 mainboard: temp=36.0 pi: temp=52.6 sysload=0.33 cputime=19.018 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 1168.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10978 bytes_read=177392 bytes_retransmit=9 bytes_invalid=0 send_seq=1379 receive_seq=1379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006872  heater_bed: target=75 temp=74.2 pwm=0.622 mainboard: temp=36.1 pi: temp=53.6 sysload=0.33 cputime=19.036 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 1169.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10984 bytes_read=177540 bytes_retransmit=9 bytes_invalid=0 send_seq=1380 receive_seq=1380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006882  heater_bed: target=75 temp=74.3 pwm=0.622 mainboard: temp=36.1 pi: temp=52.6 sysload=0.33 cputime=19.061 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 1170.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11038 bytes_read=177747 bytes_retransmit=9 bytes_invalid=0 send_seq=1384 receive_seq=1384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=74.3 pwm=0.650 mainboard: temp=36.1 pi: temp=52.6 sysload=0.33 cputime=19.087 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.5 pwm=0.000
Stats 1171.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11060 bytes_read=177907 bytes_retransmit=9 bytes_invalid=0 send_seq=1386 receive_seq=1386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006890  heater_bed: target=75 temp=74.4 pwm=0.719 mainboard: temp=36.2 pi: temp=52.6 sysload=0.30 cputime=19.106 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.5 pwm=0.000
Stats 1172.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11082 bytes_read=178075 bytes_retransmit=9 bytes_invalid=0 send_seq=1388 receive_seq=1388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006889  heater_bed: target=75 temp=74.4 pwm=0.626 mainboard: temp=36.2 pi: temp=52.1 sysload=0.30 cputime=19.125 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.5 pwm=0.000
Stats 1173.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11104 bytes_read=178257 bytes_retransmit=9 bytes_invalid=0 send_seq=1390 receive_seq=1390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006889  heater_bed: target=75 temp=74.5 pwm=0.680 mainboard: temp=36.2 pi: temp=53.1 sysload=0.30 cputime=19.144 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 1174.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11126 bytes_read=178410 bytes_retransmit=9 bytes_invalid=0 send_seq=1392 receive_seq=1392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006898  heater_bed: target=75 temp=74.5 pwm=0.591 mainboard: temp=36.0 pi: temp=53.1 sysload=0.30 cputime=19.162 memavail=3399564 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 1175.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11132 bytes_read=178573 bytes_retransmit=9 bytes_invalid=0 send_seq=1393 receive_seq=1393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006897  heater_bed: target=75 temp=74.6 pwm=0.591 mainboard: temp=36.1 pi: temp=52.6 sysload=0.30 cputime=19.179 memavail=3399332 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 1176.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11165 bytes_read=178769 bytes_retransmit=9 bytes_invalid=0 send_seq=1395 receive_seq=1395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=74.6 pwm=0.579 mainboard: temp=36.1 pi: temp=53.6 sysload=0.28 cputime=19.198 memavail=3399332 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 1177.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11203 bytes_read=178927 bytes_retransmit=9 bytes_invalid=0 send_seq=1398 receive_seq=1398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006897  heater_bed: target=75 temp=74.6 pwm=0.708 mainboard: temp=36.2 pi: temp=52.6 sysload=0.28 cputime=19.217 memavail=3399332 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 1178.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11257 bytes_read=179105 bytes_retransmit=9 bytes_invalid=0 send_seq=1402 receive_seq=1402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006886  heater_bed: target=75 temp=74.7 pwm=0.663 mainboard: temp=36.2 pi: temp=51.6 sysload=0.28 cputime=19.232 memavail=3399108 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
Stats 1179.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11295 bytes_read=179292 bytes_retransmit=9 bytes_invalid=0 send_seq=1405 receive_seq=1405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006873  heater_bed: target=75 temp=74.8 pwm=0.564 mainboard: temp=36.2 pi: temp=53.6 sysload=0.28 cputime=19.242 memavail=3399108 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
Stats 1180.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11301 bytes_read=179440 bytes_retransmit=9 bytes_invalid=0 send_seq=1406 receive_seq=1406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006862  heater_bed: target=75 temp=74.8 pwm=0.564 mainboard: temp=36.1 pi: temp=54.0 sysload=0.28 cputime=19.251 memavail=3399108 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
Stats 1181.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11339 bytes_read=179626 bytes_retransmit=9 bytes_invalid=0 send_seq=1409 receive_seq=1409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006854  heater_bed: target=75 temp=74.8 pwm=0.591 mainboard: temp=36.1 pi: temp=53.1 sysload=0.34 cputime=19.262 memavail=3399108 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 1182.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11393 bytes_read=179812 bytes_retransmit=9 bytes_invalid=0 send_seq=1413 receive_seq=1413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846  heater_bed: target=75 temp=74.9 pwm=0.636 mainboard: temp=36.1 pi: temp=53.6 sysload=0.34 cputime=19.272 memavail=3399108 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 1183.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11426 bytes_read=179965 bytes_retransmit=9 bytes_invalid=0 send_seq=1415 receive_seq=1415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006868  heater_bed: target=75 temp=74.9 pwm=0.616 mainboard: temp=36.2 pi: temp=53.6 sysload=0.34 cputime=19.287 memavail=3398620 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 1184.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11432 bytes_read=180128 bytes_retransmit=9 bytes_invalid=0 send_seq=1416 receive_seq=1416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006867  heater_bed: target=75 temp=75.0 pwm=0.563 mainboard: temp=36.1 pi: temp=52.6 sysload=0.34 cputime=19.304 memavail=3398620 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 1185.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11486 bytes_read=180320 bytes_retransmit=9 bytes_invalid=0 send_seq=1420 receive_seq=1420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006868  heater_bed: target=75 temp=75.0 pwm=0.560 mainboard: temp=36.1 pi: temp=53.6 sysload=0.34 cputime=19.324 memavail=3398636 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 1186.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11508 bytes_read=180487 bytes_retransmit=9 bytes_invalid=0 send_seq=1422 receive_seq=1422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006873  heater_bed: target=75 temp=75.0 pwm=0.652 mainboard: temp=36.2 pi: temp=53.1 sysload=0.39 cputime=19.341 memavail=3398644 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000
Stats 1187.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11546 bytes_read=180660 bytes_retransmit=9 bytes_invalid=0 send_seq=1425 receive_seq=1425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006870  heater_bed: target=75 temp=75.1 pwm=0.382 mainboard: temp=36.0 pi: temp=54.0 sysload=0.39 cputime=19.360 memavail=3398644 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000
Stats 1188.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11600 bytes_read=180852 bytes_retransmit=9 bytes_invalid=0 send_seq=1429 receive_seq=1429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006867  heater_bed: target=75 temp=75.1 pwm=0.407 mainboard: temp=36.2 pi: temp=52.6 sysload=0.39 cputime=19.381 memavail=3398392 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
Stats 1189.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11638 bytes_read=181010 bytes_retransmit=9 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006873  heater_bed: target=75 temp=75.1 pwm=0.543 mainboard: temp=36.2 pi: temp=53.6 sysload=0.39 cputime=19.399 memavail=3398392 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
Stats 1190.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11644 bytes_read=181173 bytes_retransmit=9 bytes_invalid=0 send_seq=1433 receive_seq=1433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006874  heater_bed: target=75 temp=75.2 pwm=0.543 mainboard: temp=36.1 pi: temp=51.6 sysload=0.39 cputime=19.417 memavail=3398392 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
Stats 1191.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11682 bytes_read=181374 bytes_retransmit=9 bytes_invalid=0 send_seq=1436 receive_seq=1436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006876  heater_bed: target=75 temp=75.2 pwm=0.594 mainboard: temp=36.2 pi: temp=53.1 sysload=0.44 cputime=19.438 memavail=3398392 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
Stats 1192.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11720 bytes_read=181528 bytes_retransmit=9 bytes_invalid=0 send_seq=1439 receive_seq=1439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006882  heater_bed: target=75 temp=75.2 pwm=0.636 mainboard: temp=36.2 pi: temp=53.6 sysload=0.44 cputime=19.456 memavail=3398392 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
Stats 1193.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11758 bytes_read=181697 bytes_retransmit=9 bytes_invalid=0 send_seq=1442 receive_seq=1442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006886  heater_bed: target=75 temp=75.2 pwm=0.564 mainboard: temp=36.1 pi: temp=52.6 sysload=0.44 cputime=19.472 memavail=3398392 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1194.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11812 bytes_read=181889 bytes_retransmit=9 bytes_invalid=0 send_seq=1446 receive_seq=1446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006876  heater_bed: target=75 temp=75.2 pwm=0.546 mainboard: temp=36.2 pi: temp=53.1 sysload=0.44 cputime=19.483 memavail=3398392 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1195.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11818 bytes_read=182037 bytes_retransmit=9 bytes_invalid=0 send_seq=1447 receive_seq=1447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006866  heater_bed: target=75 temp=75.3 pwm=0.546 mainboard: temp=36.2 pi: temp=54.0 sysload=0.44 cputime=19.492 memavail=3397900 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1196.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11840 bytes_read=182219 bytes_retransmit=9 bytes_invalid=0 send_seq=1449 receive_seq=1449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006859  heater_bed: target=75 temp=75.3 pwm=0.531 mainboard: temp=36.2 pi: temp=54.0 sysload=0.40 cputime=19.503 memavail=3397900 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1197.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11894 bytes_read=182411 bytes_retransmit=9 bytes_invalid=0 send_seq=1453 receive_seq=1453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006850  heater_bed: target=75 temp=75.3 pwm=0.561 mainboard: temp=36.2 pi: temp=53.1 sysload=0.40 cputime=19.514 memavail=3397900 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1198.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11932 bytes_read=182569 bytes_retransmit=9 bytes_invalid=0 send_seq=1456 receive_seq=1456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006839  heater_bed: target=75 temp=75.3 pwm=0.430 mainboard: temp=36.2 pi: temp=54.0 sysload=0.40 cputime=19.529 memavail=3397900 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1199.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11954 bytes_read=182737 bytes_retransmit=9 bytes_invalid=0 send_seq=1458 receive_seq=1458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846  heater_bed: target=75 temp=75.3 pwm=0.540 mainboard: temp=36.2 pi: temp=53.1 sysload=0.40 cputime=19.547 memavail=3397908 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1200.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12008 bytes_read=182929 bytes_retransmit=9 bytes_invalid=0 send_seq=1462 receive_seq=1462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006850  heater_bed: target=75 temp=75.4 pwm=0.347 mainboard: temp=36.2 pi: temp=52.6 sysload=0.40 cputime=19.568 memavail=3397908 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1201.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12062 bytes_read=183106 bytes_retransmit=9 bytes_invalid=0 send_seq=1466 receive_seq=1466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006842  heater_bed: target=75 temp=75.4 pwm=0.504 mainboard: temp=36.2 pi: temp=52.6 sysload=0.37 cputime=19.586 memavail=3397908 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 1202.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12116 bytes_read=183284 bytes_retransmit=9 bytes_invalid=0 send_seq=1470 receive_seq=1470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006843  heater_bed: target=75 temp=75.4 pwm=0.620 mainboard: temp=36.2 pi: temp=54.0 sysload=0.37 cputime=19.606 memavail=3397908 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 1203.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12154 bytes_read=183464 bytes_retransmit=9 bytes_invalid=0 send_seq=1473 receive_seq=1473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846  heater_bed: target=75 temp=75.4 pwm=0.541 mainboard: temp=36.2 pi: temp=53.1 sysload=0.37 cputime=19.621 memavail=3397460 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 1204.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12171 bytes_read=183611 bytes_retransmit=9 bytes_invalid=0 send_seq=1474 receive_seq=1474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006839  heater_bed: target=75 temp=75.4 pwm=0.449 mainboard: temp=36.2 pi: temp=52.6 sysload=0.37 cputime=19.631 memavail=3397468 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 1205.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12209 bytes_read=183784 bytes_retransmit=9 bytes_invalid=0 send_seq=1477 receive_seq=1477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006832  heater_bed: target=75 temp=75.4 pwm=0.512 mainboard: temp=36.2 pi: temp=54.0 sysload=0.37 cputime=19.641 memavail=3397472 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 1206.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12263 bytes_read=183990 bytes_retransmit=9 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006825  heater_bed: target=75 temp=75.4 pwm=0.508 mainboard: temp=36.2 pi: temp=54.0 sysload=0.50 cputime=19.652 memavail=3397620 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 1207.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12285 bytes_read=184143 bytes_retransmit=9 bytes_invalid=0 send_seq=1483 receive_seq=1483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006818  heater_bed: target=75 temp=75.5 pwm=0.416 mainboard: temp=36.2 pi: temp=53.6 sysload=0.50 cputime=19.662 memavail=3397724 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 1208.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12307 bytes_read=184311 bytes_retransmit=9 bytes_invalid=0 send_seq=1485 receive_seq=1485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006806  heater_bed: target=75 temp=75.5 pwm=0.382 mainboard: temp=36.2 pi: temp=54.0 sysload=0.50 cputime=19.677 memavail=3401400 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 1209.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12361 bytes_read=184503 bytes_retransmit=9 bytes_invalid=0 send_seq=1489 receive_seq=1489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006809  heater_bed: target=75 temp=75.5 pwm=0.426 mainboard: temp=36.2 pi: temp=53.6 sysload=0.50 cputime=19.697 memavail=3401408 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 1210.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12399 bytes_read=184661 bytes_retransmit=9 bytes_invalid=0 send_seq=1492 receive_seq=1492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006815  heater_bed: target=75 temp=75.5 pwm=0.358 mainboard: temp=36.3 pi: temp=52.1 sysload=0.50 cputime=19.716 memavail=3401408 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1211.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12432 bytes_read=184843 bytes_retransmit=9 bytes_invalid=0 send_seq=1494 receive_seq=1494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816  heater_bed: target=75 temp=75.5 pwm=0.437 mainboard: temp=36.3 pi: temp=52.6 sysload=0.46 cputime=19.736 memavail=3401408 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1212.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12454 bytes_read=185025 bytes_retransmit=9 bytes_invalid=0 send_seq=1496 receive_seq=1496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006827  heater_bed: target=75 temp=75.5 pwm=0.549 mainboard: temp=36.2 pi: temp=53.1 sysload=0.46 cputime=19.755 memavail=3401408 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1213.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12492 bytes_read=185183 bytes_retransmit=9 bytes_invalid=0 send_seq=1499 receive_seq=1499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006830  heater_bed: target=75 temp=75.5 pwm=0.593 mainboard: temp=36.2 pi: temp=53.1 sysload=0.46 cputime=19.772 memavail=3400908 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1214.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12514 bytes_read=185344 bytes_retransmit=9 bytes_invalid=0 send_seq=1501 receive_seq=1501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006836  heater_bed: target=75 temp=75.5 pwm=0.469 mainboard: temp=36.2 pi: temp=52.6 sysload=0.46 cputime=19.791 memavail=3400924 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1215.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12520 bytes_read=185521 bytes_retransmit=9 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006858  heater_bed: target=75 temp=75.5 pwm=0.469 mainboard: temp=36.2 pi: temp=52.6 sysload=0.46 cputime=19.809 memavail=3400212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1216.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12564 bytes_read=185709 bytes_retransmit=9 bytes_invalid=0 send_seq=1506 receive_seq=1506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006872  heater_bed: target=75 temp=75.5 pwm=0.459 mainboard: temp=36.2 pi: temp=52.6 sysload=0.42 cputime=19.829 memavail=3400212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1217.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12586 bytes_read=185877 bytes_retransmit=9 bytes_invalid=0 send_seq=1508 receive_seq=1508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006874  heater_bed: target=75 temp=75.5 pwm=0.386 mainboard: temp=36.2 pi: temp=53.1 sysload=0.42 cputime=19.847 memavail=3400212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1218.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12592 bytes_read=186054 bytes_retransmit=9 bytes_invalid=0 send_seq=1509 receive_seq=1509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006866  heater_bed: target=75 temp=75.6 pwm=0.386 mainboard: temp=36.2 pi: temp=54.5 sysload=0.42 cputime=19.861 memavail=3400212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1219.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12630 bytes_read=186212 bytes_retransmit=9 bytes_invalid=0 send_seq=1512 receive_seq=1512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006863  heater_bed: target=75 temp=75.6 pwm=0.363 mainboard: temp=36.3 pi: temp=53.1 sysload=0.42 cputime=19.871 memavail=3400212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1220.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12636 bytes_read=186375 bytes_retransmit=9 bytes_invalid=0 send_seq=1513 receive_seq=1513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006860  heater_bed: target=75 temp=75.6 pwm=0.363 mainboard: temp=36.3 pi: temp=54.5 sysload=0.42 cputime=19.880 memavail=3400212 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1221.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12685 bytes_read=186576 bytes_retransmit=9 bytes_invalid=0 send_seq=1516 receive_seq=1516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852  heater_bed: target=75 temp=75.6 pwm=0.425 mainboard: temp=36.2 pi: temp=53.6 sysload=0.39 cputime=19.891 memavail=3400360 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1222.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12739 bytes_read=186739 bytes_retransmit=9 bytes_invalid=0 send_seq=1520 receive_seq=1520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006847  heater_bed: target=75 temp=75.6 pwm=0.572 mainboard: temp=36.3 pi: temp=54.0 sysload=0.39 cputime=19.901 memavail=3400464 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 1223.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12777 bytes_read=186912 bytes_retransmit=9 bytes_invalid=0 send_seq=1523 receive_seq=1523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006849  heater_bed: target=75 temp=75.6 pwm=0.409 mainboard: temp=36.2 pi: temp=54.5 sysload=0.39 cputime=19.916 memavail=3403684 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1224.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12799 bytes_read=187091 bytes_retransmit=9 bytes_invalid=0 send_seq=1525 receive_seq=1525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006855  heater_bed: target=75 temp=75.6 pwm=0.471 mainboard: temp=36.2 pi: temp=53.6 sysload=0.39 cputime=19.933 memavail=3403828 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1225.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12821 bytes_read=187241 bytes_retransmit=9 bytes_invalid=0 send_seq=1527 receive_seq=1527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006861  heater_bed: target=75 temp=75.6 pwm=0.368 mainboard: temp=36.2 pi: temp=54.0 sysload=0.39 cputime=19.949 memavail=3403832 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1226.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12843 bytes_read=187423 bytes_retransmit=9 bytes_invalid=0 send_seq=1529 receive_seq=1529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006860  heater_bed: target=75 temp=75.6 pwm=0.419 mainboard: temp=36.2 pi: temp=53.1 sysload=0.44 cputime=19.967 memavail=3403832 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1227.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12913 bytes_read=187620 bytes_retransmit=9 bytes_invalid=0 send_seq=1534 receive_seq=1534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006863  heater_bed: target=75 temp=75.6 pwm=0.452 mainboard: temp=36.1 pi: temp=52.6 sysload=0.44 cputime=19.986 memavail=3403892 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1228.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12935 bytes_read=187773 bytes_retransmit=9 bytes_invalid=0 send_seq=1536 receive_seq=1536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006854  heater_bed: target=75 temp=75.6 pwm=0.371 mainboard: temp=36.0 pi: temp=52.6 sysload=0.44 cputime=19.999 memavail=3402464 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1229.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=12973 bytes_read=187946 bytes_retransmit=9 bytes_invalid=0 send_seq=1539 receive_seq=1539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006845  heater_bed: target=75 temp=75.6 pwm=0.375 mainboard: temp=36.2 pi: temp=53.6 sysload=0.44 cputime=20.009 memavail=3402464 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1230.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13011 bytes_read=188133 bytes_retransmit=9 bytes_invalid=0 send_seq=1542 receive_seq=1542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006841  heater_bed: target=75 temp=75.6 pwm=0.386 mainboard: temp=36.3 pi: temp=53.6 sysload=0.44 cputime=20.019 memavail=3402464 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1231.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13017 bytes_read=188295 bytes_retransmit=9 bytes_invalid=0 send_seq=1543 receive_seq=1543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006844  heater_bed: target=75 temp=75.6 pwm=0.386 mainboard: temp=36.2 pi: temp=53.6 sysload=0.40 cputime=20.029 memavail=3402464 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1232.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13039 bytes_read=188463 bytes_retransmit=9 bytes_invalid=0 send_seq=1545 receive_seq=1545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006837  heater_bed: target=75 temp=75.6 pwm=0.452 mainboard: temp=36.3 pi: temp=54.5 sysload=0.40 cputime=20.039 memavail=3402464 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 1233.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13077 bytes_read=188650 bytes_retransmit=9 bytes_invalid=0 send_seq=1548 receive_seq=1548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006848  heater_bed: target=75 temp=75.6 pwm=0.425 mainboard: temp=36.2 pi: temp=53.6 sysload=0.40 cputime=20.053 memavail=3401560 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1234.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13083 bytes_read=188798 bytes_retransmit=9 bytes_invalid=0 send_seq=1549 receive_seq=1549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006875  heater_bed: target=75 temp=75.6 pwm=0.425 mainboard: temp=36.2 pi: temp=53.1 sysload=0.40 cputime=20.071 memavail=3401560 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1235.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13105 bytes_read=188962 bytes_retransmit=9 bytes_invalid=0 send_seq=1551 receive_seq=1551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006878  heater_bed: target=75 temp=75.6 pwm=0.417 mainboard: temp=36.2 pi: temp=53.6 sysload=0.40 cputime=20.089 memavail=3400560 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1236.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13143 bytes_read=189161 bytes_retransmit=9 bytes_invalid=0 send_seq=1554 receive_seq=1554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006901  heater_bed: target=75 temp=75.6 pwm=0.360 mainboard: temp=36.4 pi: temp=54.0 sysload=0.37 cputime=20.108 memavail=3400560 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1237.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13181 bytes_read=189319 bytes_retransmit=9 bytes_invalid=0 send_seq=1557 receive_seq=1557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006905  heater_bed: target=75 temp=75.6 pwm=0.381 mainboard: temp=36.2 pi: temp=53.1 sysload=0.37 cputime=20.127 memavail=3400568 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1238.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13219 bytes_read=189492 bytes_retransmit=9 bytes_invalid=0 send_seq=1560 receive_seq=1560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=75.6 pwm=0.454 mainboard: temp=36.2 pi: temp=52.1 sysload=0.37 cputime=20.146 memavail=3400120 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1239.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13273 bytes_read=189684 bytes_retransmit=9 bytes_invalid=0 send_seq=1564 receive_seq=1564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006903  heater_bed: target=75 temp=75.6 pwm=0.427 mainboard: temp=36.2 pi: temp=54.0 sysload=0.37 cputime=20.166 memavail=3400120 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1240.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13295 bytes_read=189837 bytes_retransmit=9 bytes_invalid=0 send_seq=1566 receive_seq=1566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006898  heater_bed: target=75 temp=75.6 pwm=0.376 mainboard: temp=36.2 pi: temp=52.6 sysload=0.37 cputime=20.185 memavail=3400120 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1241.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13349 bytes_read=190029 bytes_retransmit=9 bytes_invalid=0 send_seq=1570 receive_seq=1570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006904  heater_bed: target=75 temp=75.6 pwm=0.402 mainboard: temp=36.2 pi: temp=53.1 sysload=0.34 cputime=20.211 memavail=3393056 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1242.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13355 bytes_read=190206 bytes_retransmit=9 bytes_invalid=0 send_seq=1571 receive_seq=1571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006894  heater_bed: target=75 temp=75.6 pwm=0.402 mainboard: temp=36.2 pi: temp=53.6 sysload=0.34 cputime=20.226 memavail=3399044 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1243.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13361 bytes_read=190354 bytes_retransmit=9 bytes_invalid=0 send_seq=1572 receive_seq=1572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006882  heater_bed: target=75 temp=75.6 pwm=0.402 mainboard: temp=36.4 pi: temp=53.6 sysload=0.34 cputime=20.236 memavail=3398372 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1244.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13383 bytes_read=190536 bytes_retransmit=9 bytes_invalid=0 send_seq=1574 receive_seq=1574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006875  heater_bed: target=75 temp=75.6 pwm=0.346 mainboard: temp=36.3 pi: temp=54.5 sysload=0.34 cputime=20.247 memavail=3398148 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1245.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13437 bytes_read=190714 bytes_retransmit=9 bytes_invalid=0 send_seq=1578 receive_seq=1578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006867  heater_bed: target=75 temp=75.6 pwm=0.339 mainboard: temp=36.2 pi: temp=54.0 sysload=0.34 cputime=20.259 memavail=3397892 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1246.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13475 bytes_read=190879 bytes_retransmit=9 bytes_invalid=0 send_seq=1581 receive_seq=1581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006851  heater_bed: target=75 temp=75.6 pwm=0.338 mainboard: temp=36.2 pi: temp=53.6 sysload=0.39 cputime=20.272 memavail=3397892 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1247.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13513 bytes_read=191066 bytes_retransmit=9 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852  heater_bed: target=75 temp=75.6 pwm=0.266 mainboard: temp=36.2 pi: temp=54.5 sysload=0.39 cputime=20.292 memavail=3397892 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000
Stats 1248.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13551 bytes_read=191239 bytes_retransmit=9 bytes_invalid=0 send_seq=1587 receive_seq=1587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006844  heater_bed: target=75 temp=75.5 pwm=0.488 mainboard: temp=36.3 pi: temp=54.0 sysload=0.39 cputime=20.307 memavail=3396940 print_time=842.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 1249.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13589 bytes_read=191397 bytes_retransmit=9 bytes_invalid=0 send_seq=1590 receive_seq=1590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006862  heater_bed: target=75 temp=75.6 pwm=0.415 mainboard: temp=36.2 pi: temp=54.0 sysload=0.39 cputime=20.318 memavail=3396232 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=54.5 pwm=1.000
Heater extruder approaching new target of 245.000
Stats 1250.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13627 bytes_read=191584 bytes_retransmit=9 bytes_invalid=0 send_seq=1593 receive_seq=1593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006850  heater_bed: target=75 temp=75.6 pwm=0.366 mainboard: temp=36.3 pi: temp=54.0 sysload=0.39 cputime=20.330 memavail=3396380 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=54.5 pwm=1.000
Stats 1251.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13633 bytes_read=191761 bytes_retransmit=9 bytes_invalid=0 send_seq=1594 receive_seq=1594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006843  heater_bed: target=75 temp=75.6 pwm=0.366 mainboard: temp=36.2 pi: temp=54.0 sysload=0.36 cputime=20.340 memavail=3396576 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=54.6 pwm=1.000
Stats 1252.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13671 bytes_read=191919 bytes_retransmit=9 bytes_invalid=0 send_seq=1597 receive_seq=1597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006839  heater_bed: target=75 temp=75.6 pwm=0.249 mainboard: temp=36.3 pi: temp=54.5 sysload=0.36 cputime=20.350 memavail=3400876 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=54.9 pwm=1.000
Stats 1253.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13704 bytes_read=192101 bytes_retransmit=9 bytes_invalid=0 send_seq=1599 receive_seq=1599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006853  heater_bed: target=75 temp=75.7 pwm=0.125 mainboard: temp=36.3 pi: temp=54.5 sysload=0.36 cputime=20.366 memavail=3399348 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=55.2 pwm=1.000
Stats 1254.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13725 bytes_read=192269 bytes_retransmit=9 bytes_invalid=0 send_seq=1601 receive_seq=1601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006856  heater_bed: target=75 temp=75.8 pwm=0.006 mainboard: temp=36.3 pi: temp=53.6 sysload=0.36 cputime=20.384 memavail=3399348 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=55.8 pwm=1.000
Stats 1255.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13731 bytes_read=192417 bytes_retransmit=9 bytes_invalid=0 send_seq=1602 receive_seq=1602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006860  heater_bed: target=75 temp=75.9 pwm=0.006 mainboard: temp=36.3 pi: temp=53.1 sysload=0.36 cputime=20.402 memavail=3398852 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=56.4 pwm=1.000
Stats 1256.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13737 bytes_read=192607 bytes_retransmit=9 bytes_invalid=0 send_seq=1603 receive_seq=1603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006859  heater_bed: target=75 temp=76.0 pwm=0.006 mainboard: temp=36.2 pi: temp=53.1 sysload=0.33 cputime=20.420 memavail=3398852 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=57.0 pwm=1.000
Stats 1257.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13759 bytes_read=192768 bytes_retransmit=9 bytes_invalid=0 send_seq=1605 receive_seq=1605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006897  heater_bed: target=75 temp=76.2 pwm=0.006 mainboard: temp=36.2 pi: temp=54.0 sysload=0.33 cputime=20.438 memavail=3398852 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=58.0 pwm=1.000
Stats 1258.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13778 bytes_read=192921 bytes_retransmit=9 bytes_invalid=0 send_seq=1607 receive_seq=1607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006898  heater_bed: target=75 temp=76.3 pwm=0.000 mainboard: temp=36.2 pi: temp=53.1 sysload=0.33 cputime=20.455 memavail=3398404 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=58.8 pwm=1.000
Stats 1259.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13784 bytes_read=193098 bytes_retransmit=9 bytes_invalid=0 send_seq=1608 receive_seq=1608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006916  heater_bed: target=75 temp=76.4 pwm=0.000 mainboard: temp=36.3 pi: temp=52.6 sysload=0.33 cputime=20.474 memavail=3398408 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=59.6 pwm=1.000
Stats 1260.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13790 bytes_read=193261 bytes_retransmit=9 bytes_invalid=0 send_seq=1609 receive_seq=1609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006925  heater_bed: target=75 temp=76.6 pwm=0.000 mainboard: temp=36.1 pi: temp=53.6 sysload=0.33 cputime=20.494 memavail=3398408 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=60.8 pwm=1.000
Stats 1261.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13812 bytes_read=193428 bytes_retransmit=9 bytes_invalid=0 send_seq=1611 receive_seq=1611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006921  heater_bed: target=75 temp=76.8 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.39 cputime=20.512 memavail=3398408 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=61.7 pwm=1.000
Stats 1262.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13818 bytes_read=193605 bytes_retransmit=9 bytes_invalid=0 send_seq=1612 receive_seq=1612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006923  heater_bed: target=75 temp=77.0 pwm=0.000 mainboard: temp=36.2 pi: temp=53.1 sysload=0.39 cputime=20.531 memavail=3398408 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=62.6 pwm=1.000
Stats 1263.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13824 bytes_read=193768 bytes_retransmit=9 bytes_invalid=0 send_seq=1613 receive_seq=1613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006921  heater_bed: target=75 temp=77.2 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.39 cputime=20.545 memavail=3397736 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=64.0 pwm=1.000
Stats 1264.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13830 bytes_read=193916 bytes_retransmit=9 bytes_invalid=0 send_seq=1614 receive_seq=1614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006908  heater_bed: target=75 temp=77.4 pwm=0.000 mainboard: temp=36.3 pi: temp=53.1 sysload=0.39 cputime=20.555 memavail=3397736 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=65.0 pwm=1.000
Stats 1265.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13836 bytes_read=194093 bytes_retransmit=9 bytes_invalid=0 send_seq=1615 receive_seq=1615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006899  heater_bed: target=75 temp=77.7 pwm=0.000 mainboard: temp=36.2 pi: temp=54.0 sysload=0.39 cputime=20.565 memavail=3397004 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=66.0 pwm=1.000
Stats 1266.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13858 bytes_read=194275 bytes_retransmit=9 bytes_invalid=0 send_seq=1617 receive_seq=1617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=77.9 pwm=0.000 mainboard: temp=36.2 pi: temp=54.0 sysload=0.44 cputime=20.576 memavail=3397744 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=67.3 pwm=1.000
Stats 1267.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13864 bytes_read=194420 bytes_retransmit=9 bytes_invalid=0 send_seq=1618 receive_seq=1618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006885  heater_bed: target=75 temp=78.1 pwm=0.000 mainboard: temp=36.2 pi: temp=54.5 sysload=0.44 cputime=20.586 memavail=3397760 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=68.4 pwm=1.000
Stats 1268.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13870 bytes_read=194592 bytes_retransmit=9 bytes_invalid=0 send_seq=1619 receive_seq=1619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=78.4 pwm=0.000 mainboard: temp=36.3 pi: temp=53.1 sysload=0.44 cputime=20.600 memavail=3397760 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=69.4 pwm=1.000
Stats 1269.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13876 bytes_read=194755 bytes_retransmit=9 bytes_invalid=0 send_seq=1620 receive_seq=1620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=78.7 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.44 cputime=20.618 memavail=3397764 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=70.8 pwm=1.000
Stats 1270.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13898 bytes_read=194908 bytes_retransmit=9 bytes_invalid=0 send_seq=1622 receive_seq=1622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006908  heater_bed: target=75 temp=78.9 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.44 cputime=20.637 memavail=3397764 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=71.9 pwm=1.000
Stats 1271.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13904 bytes_read=195099 bytes_retransmit=9 bytes_invalid=0 send_seq=1623 receive_seq=1623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=79.2 pwm=0.000 mainboard: temp=36.2 pi: temp=53.1 sysload=0.40 cputime=20.655 memavail=3397764 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=73.0 pwm=1.000
Stats 1272.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13910 bytes_read=195262 bytes_retransmit=9 bytes_invalid=0 send_seq=1624 receive_seq=1624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=79.5 pwm=0.000 mainboard: temp=36.3 pi: temp=53.1 sysload=0.40 cputime=20.673 memavail=3397764 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=74.4 pwm=1.000
Stats 1273.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13916 bytes_read=195410 bytes_retransmit=9 bytes_invalid=0 send_seq=1625 receive_seq=1625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006915  heater_bed: target=75 temp=79.8 pwm=0.000 mainboard: temp=36.3 pi: temp=53.1 sysload=0.40 cputime=20.687 memavail=3397524 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=75.6 pwm=1.000
Stats 1274.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13938 bytes_read=195592 bytes_retransmit=9 bytes_invalid=0 send_seq=1627 receive_seq=1627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006910  heater_bed: target=75 temp=80.2 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.40 cputime=20.698 memavail=3397532 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=76.7 pwm=1.000
Stats 1275.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13944 bytes_read=195755 bytes_retransmit=9 bytes_invalid=0 send_seq=1628 receive_seq=1628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=80.5 pwm=0.000 mainboard: temp=36.2 pi: temp=54.5 sysload=0.40 cputime=20.708 memavail=3397028 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=78.1 pwm=1.000
Stats 1276.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13950 bytes_read=195917 bytes_retransmit=9 bytes_invalid=0 send_seq=1629 receive_seq=1629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=80.7 pwm=0.000 mainboard: temp=36.3 pi: temp=54.0 sysload=0.37 cputime=20.718 memavail=3397028 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=79.3 pwm=1.000
Stats 1277.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13962 bytes_read=196110 bytes_retransmit=9 bytes_invalid=0 send_seq=1631 receive_seq=1631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006877  heater_bed: target=75 temp=81.1 pwm=0.000 mainboard: temp=36.3 pi: temp=54.0 sysload=0.37 cputime=20.728 memavail=3397036 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=80.4 pwm=1.000
Stats 1278.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13984 bytes_read=196271 bytes_retransmit=9 bytes_invalid=0 send_seq=1633 receive_seq=1633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006876  heater_bed: target=75 temp=81.4 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.37 cputime=20.743 memavail=3396788 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=81.9 pwm=1.000
Stats 1279.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13990 bytes_read=196419 bytes_retransmit=9 bytes_invalid=0 send_seq=1634 receive_seq=1634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006887  heater_bed: target=75 temp=81.8 pwm=0.000 mainboard: temp=36.2 pi: temp=54.0 sysload=0.37 cputime=20.761 memavail=3396788 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=83.0 pwm=1.000
Stats 1280.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13996 bytes_read=196596 bytes_retransmit=9 bytes_invalid=0 send_seq=1635 receive_seq=1635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006886  heater_bed: target=75 temp=82.2 pwm=0.000 mainboard: temp=36.4 pi: temp=52.6 sysload=0.37 cputime=20.779 memavail=3396788 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=84.2 pwm=1.000
Stats 1281.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14002 bytes_read=196773 bytes_retransmit=9 bytes_invalid=0 send_seq=1636 receive_seq=1636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006884  heater_bed: target=75 temp=82.5 pwm=0.000 mainboard: temp=36.2 pi: temp=54.0 sysload=0.42 cputime=20.797 memavail=3396788 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=85.7 pwm=1.000
Stats 1282.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14024 bytes_read=196926 bytes_retransmit=9 bytes_invalid=0 send_seq=1638 receive_seq=1638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=82.8 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.42 cputime=20.815 memavail=3396788 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=86.8 pwm=1.000
Stats 1283.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14030 bytes_read=197103 bytes_retransmit=9 bytes_invalid=0 send_seq=1639 receive_seq=1639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006882  heater_bed: target=75 temp=83.2 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.42 cputime=20.833 memavail=3396292 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=88.0 pwm=1.000
Stats 1284.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14036 bytes_read=197266 bytes_retransmit=9 bytes_invalid=0 send_seq=1640 receive_seq=1640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006885  heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.42 cputime=20.850 memavail=3396292 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=89.5 pwm=1.000
Stats 1285.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14042 bytes_read=197414 bytes_retransmit=9 bytes_invalid=0 send_seq=1641 receive_seq=1641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=83.9 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.42 cputime=20.867 memavail=3396040 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=90.7 pwm=1.000
Stats 1286.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14048 bytes_read=197605 bytes_retransmit=9 bytes_invalid=0 send_seq=1642 receive_seq=1642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=84.4 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.39 cputime=20.884 memavail=3396040 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=91.8 pwm=1.000
Stats 1287.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14070 bytes_read=197773 bytes_retransmit=9 bytes_invalid=0 send_seq=1644 receive_seq=1644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006895  heater_bed: target=75 temp=84.8 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.39 cputime=20.901 memavail=3396040 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=93.4 pwm=1.000
Stats 1288.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14076 bytes_read=197921 bytes_retransmit=9 bytes_invalid=0 send_seq=1645 receive_seq=1645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006884  heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.39 cputime=20.917 memavail=3395564 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=94.5 pwm=1.000
Stats 1289.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14082 bytes_read=198091 bytes_retransmit=9 bytes_invalid=0 send_seq=1646 receive_seq=1646 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006875  heater_bed: target=75 temp=85.5 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.39 cputime=20.933 memavail=3395564 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=95.7 pwm=1.000
Stats 1290.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14088 bytes_read=198254 bytes_retransmit=9 bytes_invalid=0 send_seq=1647 receive_seq=1647 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006866  heater_bed: target=75 temp=85.9 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.39 cputime=20.944 memavail=3395580 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=97.2 pwm=1.000
Stats 1291.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14110 bytes_read=198421 bytes_retransmit=9 bytes_invalid=0 send_seq=1649 receive_seq=1649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006856  heater_bed: target=75 temp=86.2 pwm=0.000 mainboard: temp=36.2 pi: temp=53.6 sysload=0.35 cputime=20.955 memavail=3395580 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=98.3 pwm=1.000
Stats 1292.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14116 bytes_read=198598 bytes_retransmit=9 bytes_invalid=0 send_seq=1650 receive_seq=1650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006847  heater_bed: target=75 temp=86.6 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.35 cputime=20.966 memavail=3395580 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=99.4 pwm=1.000
Stats 1293.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14122 bytes_read=198761 bytes_retransmit=9 bytes_invalid=0 send_seq=1651 receive_seq=1651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006851  heater_bed: target=75 temp=86.9 pwm=0.000 mainboard: temp=36.2 pi: temp=54.0 sysload=0.35 cputime=20.980 memavail=3394844 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=100.9 pwm=1.000
Stats 1294.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14128 bytes_read=198909 bytes_retransmit=9 bytes_invalid=0 send_seq=1652 receive_seq=1652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006857  heater_bed: target=75 temp=87.2 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.35 cputime=21.001 memavail=3394340 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=102.0 pwm=1.000
Stats 1295.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14150 bytes_read=199091 bytes_retransmit=9 bytes_invalid=0 send_seq=1654 receive_seq=1654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006855  heater_bed: target=75 temp=87.6 pwm=0.000 mainboard: temp=36.3 pi: temp=54.5 sysload=0.35 cputime=21.032 memavail=3394092 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=103.2 pwm=1.000
Stats 1296.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14156 bytes_read=199268 bytes_retransmit=9 bytes_invalid=0 send_seq=1655 receive_seq=1655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006857  heater_bed: target=75 temp=88.0 pwm=0.000 mainboard: temp=36.4 pi: temp=53.1 sysload=0.33 cputime=21.054 memavail=3394092 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=104.7 pwm=1.000
Stats 1297.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14162 bytes_read=199416 bytes_retransmit=9 bytes_invalid=0 send_seq=1656 receive_seq=1656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006858  heater_bed: target=75 temp=88.2 pwm=0.000 mainboard: temp=36.3 pi: temp=53.1 sysload=0.33 cputime=21.076 memavail=3394252 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=105.8 pwm=1.000
Stats 1298.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14168 bytes_read=199593 bytes_retransmit=9 bytes_invalid=0 send_seq=1657 receive_seq=1657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006850  heater_bed: target=75 temp=88.7 pwm=0.000 mainboard: temp=36.4 pi: temp=53.1 sysload=0.33 cputime=21.094 memavail=3397596 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=106.9 pwm=1.000
Stats 1299.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14185 bytes_read=199755 bytes_retransmit=9 bytes_invalid=0 send_seq=1658 receive_seq=1658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006844  heater_bed: target=75 temp=89.0 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.33 cputime=21.107 memavail=3397372 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=108.4 pwm=1.000
Stats 1300.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14191 bytes_read=199896 bytes_retransmit=9 bytes_invalid=0 send_seq=1659 receive_seq=1659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006840  heater_bed: target=75 temp=89.3 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.33 cputime=21.120 memavail=3397372 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=109.5 pwm=1.000
Stats 1301.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14197 bytes_read=200087 bytes_retransmit=9 bytes_invalid=0 send_seq=1660 receive_seq=1660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006860  heater_bed: target=75 temp=89.7 pwm=0.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.30 cputime=21.133 memavail=3397372 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=110.6 pwm=1.000
Stats 1302.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14203 bytes_read=200250 bytes_retransmit=9 bytes_invalid=0 send_seq=1661 receive_seq=1661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006855  heater_bed: target=75 temp=89.9 pwm=0.000 mainboard: temp=36.5 pi: temp=53.6 sysload=0.30 cputime=21.145 memavail=3397380 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=112.1 pwm=1.000
Stats 1303.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14225 bytes_read=200403 bytes_retransmit=9 bytes_invalid=0 send_seq=1663 receive_seq=1663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006861  heater_bed: target=75 temp=90.2 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.30 cputime=21.163 memavail=3396388 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=113.2 pwm=1.000
Stats 1304.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14231 bytes_read=200580 bytes_retransmit=9 bytes_invalid=0 send_seq=1664 receive_seq=1664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006864  heater_bed: target=75 temp=90.7 pwm=0.000 mainboard: temp=36.2 pi: temp=54.0 sysload=0.30 cputime=21.186 memavail=3396396 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=114.3 pwm=1.000
Stats 1305.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14237 bytes_read=200743 bytes_retransmit=9 bytes_invalid=0 send_seq=1665 receive_seq=1665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006875  heater_bed: target=75 temp=90.9 pwm=0.000 mainboard: temp=36.2 pi: temp=54.0 sysload=0.30 cputime=21.209 memavail=3395680 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=115.8 pwm=1.000
Stats 1306.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14243 bytes_read=200905 bytes_retransmit=9 bytes_invalid=0 send_seq=1666 receive_seq=1666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=91.4 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.28 cputime=21.231 memavail=3395944 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=117.0 pwm=1.000
Stats 1307.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14249 bytes_read=201082 bytes_retransmit=9 bytes_invalid=0 send_seq=1667 receive_seq=1667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006882  heater_bed: target=75 temp=92.1 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.28 cputime=21.254 memavail=3395944 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=118.3 pwm=1.000
Stats 1308.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14271 bytes_read=201250 bytes_retransmit=9 bytes_invalid=0 send_seq=1669 receive_seq=1669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=92.3 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.28 cputime=21.275 memavail=3395692 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=119.8 pwm=1.000
Stats 1309.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14277 bytes_read=201398 bytes_retransmit=9 bytes_invalid=0 send_seq=1670 receive_seq=1670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=92.5 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.28 cputime=21.296 memavail=3395692 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=120.8 pwm=1.000
Stats 1310.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14283 bytes_read=201570 bytes_retransmit=9 bytes_invalid=0 send_seq=1671 receive_seq=1671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006884  heater_bed: target=75 temp=92.9 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.28 cputime=21.320 memavail=3400076 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=121.8 pwm=1.000
Stats 1311.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14289 bytes_read=201741 bytes_retransmit=9 bytes_invalid=0 send_seq=1672 receive_seq=1672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=93.3 pwm=0.000 mainboard: temp=36.3 pi: temp=54.0 sysload=0.33 cputime=21.342 memavail=3400076 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=123.4 pwm=1.000
Stats 1312.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14311 bytes_read=201891 bytes_retransmit=9 bytes_invalid=0 send_seq=1674 receive_seq=1674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006888  heater_bed: target=75 temp=93.5 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.33 cputime=21.363 memavail=3400076 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=124.5 pwm=1.000
Stats 1313.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14317 bytes_read=202065 bytes_retransmit=9 bytes_invalid=0 send_seq=1675 receive_seq=1675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006907  heater_bed: target=75 temp=93.9 pwm=0.000 mainboard: temp=36.3 pi: temp=53.6 sysload=0.33 cputime=21.379 memavail=3399404 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=125.7 pwm=1.000
Stats 1314.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14323 bytes_read=202224 bytes_retransmit=9 bytes_invalid=0 send_seq=1676 receive_seq=1676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006928  heater_bed: target=75 temp=94.2 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.33 cputime=21.391 memavail=3399404 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=127.1 pwm=1.000
Stats 1315.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14329 bytes_read=202369 bytes_retransmit=9 bytes_invalid=0 send_seq=1677 receive_seq=1677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006917  heater_bed: target=75 temp=94.6 pwm=0.000 mainboard: temp=36.4 pi: temp=55.0 sysload=0.33 cputime=21.403 memavail=3398904 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=128.3 pwm=1.000
Stats 1316.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14351 bytes_read=202562 bytes_retransmit=9 bytes_invalid=0 send_seq=1679 receive_seq=1679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006905  heater_bed: target=75 temp=95.2 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.39 cputime=21.416 memavail=3398692 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=129.5 pwm=1.000
Stats 1317.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14357 bytes_read=202721 bytes_retransmit=9 bytes_invalid=0 send_seq=1680 receive_seq=1680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006895  heater_bed: target=75 temp=95.8 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.39 cputime=21.428 memavail=3398692 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=131.1 pwm=1.000
Stats 1318.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14363 bytes_read=202881 bytes_retransmit=9 bytes_invalid=0 send_seq=1681 receive_seq=1681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006897  heater_bed: target=75 temp=96.0 pwm=0.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.39 cputime=21.446 memavail=3398692 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=132.0 pwm=1.000
Stats 1319.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14369 bytes_read=203054 bytes_retransmit=9 bytes_invalid=0 send_seq=1682 receive_seq=1682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=96.4 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.39 cputime=21.467 memavail=3398692 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=133.6 pwm=1.000
Stats 1320.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14391 bytes_read=203204 bytes_retransmit=9 bytes_invalid=0 send_seq=1684 receive_seq=1684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006895  heater_bed: target=75 temp=96.3 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.39 cputime=21.488 memavail=3398692 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=134.5 pwm=1.000
Stats 1321.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14397 bytes_read=203372 bytes_retransmit=9 bytes_invalid=0 send_seq=1685 receive_seq=1685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=96.4 pwm=0.000 mainboard: temp=36.3 pi: temp=54.0 sysload=0.36 cputime=21.511 memavail=3398700 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=135.5 pwm=1.000
Stats 1322.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14403 bytes_read=203544 bytes_retransmit=9 bytes_invalid=0 send_seq=1686 receive_seq=1686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896  heater_bed: target=75 temp=96.6 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.36 cputime=21.533 memavail=3398700 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=136.8 pwm=1.000
Stats 1323.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14409 bytes_read=203689 bytes_retransmit=9 bytes_invalid=0 send_seq=1687 receive_seq=1687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006897  heater_bed: target=75 temp=96.9 pwm=0.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.36 cputime=21.554 memavail=3400740 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=137.9 pwm=1.000
Stats 1324.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14431 bytes_read=203854 bytes_retransmit=9 bytes_invalid=0 send_seq=1689 receive_seq=1689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006903  heater_bed: target=75 temp=97.0 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.36 cputime=21.576 memavail=3400740 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=139.1 pwm=1.000
Stats 1325.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14437 bytes_read=204027 bytes_retransmit=9 bytes_invalid=0 send_seq=1690 receive_seq=1690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900  heater_bed: target=75 temp=97.6 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.36 cputime=21.599 memavail=3400744 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=140.1 pwm=1.000
Stats 1326.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14443 bytes_read=204172 bytes_retransmit=9 bytes_invalid=0 send_seq=1691 receive_seq=1691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006902  heater_bed: target=75 temp=97.0 pwm=0.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.33 cputime=21.621 memavail=3400744 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=140.9 pwm=1.000
Stats 1327.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14449 bytes_read=204346 bytes_retransmit=9 bytes_invalid=0 send_seq=1692 receive_seq=1692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006903  heater_bed: target=75 temp=97.1 pwm=0.000 mainboard: temp=36.4 pi: temp=53.1 sysload=0.33 cputime=21.643 memavail=3400492 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=141.8 pwm=1.000
Stats 1328.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14455 bytes_read=204519 bytes_retransmit=9 bytes_invalid=0 send_seq=1693 receive_seq=1693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006906  heater_bed: target=75 temp=97.1 pwm=0.000 mainboard: temp=36.5 pi: temp=52.6 sysload=0.33 cputime=21.666 memavail=3400052 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=143.2 pwm=1.000
Stats 1329.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14477 bytes_read=204669 bytes_retransmit=9 bytes_invalid=0 send_seq=1695 receive_seq=1695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006906  heater_bed: target=75 temp=97.1 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.33 cputime=21.687 memavail=3399576 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=144.1 pwm=1.000
Stats 1330.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14483 bytes_read=204829 bytes_retransmit=9 bytes_invalid=0 send_seq=1696 receive_seq=1696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006904  heater_bed: target=75 temp=97.3 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.33 cputime=21.708 memavail=3399576 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=145.0 pwm=1.000
Stats 1331.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14489 bytes_read=205002 bytes_retransmit=9 bytes_invalid=0 send_seq=1697 receive_seq=1697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006904  heater_bed: target=75 temp=98.1 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.38 cputime=21.729 memavail=3399576 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=146.9 pwm=1.000
Stats 1332.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14495 bytes_read=205155 bytes_retransmit=9 bytes_invalid=0 send_seq=1698 receive_seq=1698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006904  heater_bed: target=75 temp=105.2 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.38 cputime=21.749 memavail=3399576 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=151.9 pwm=1.000
Stats 1333.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14549 bytes_read=205330 bytes_retransmit=9 bytes_invalid=0 send_seq=1702 receive_seq=1702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400006902  heater_bed: target=75 temp=97.3 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.38 cputime=21.766 memavail=3398652 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=148.0 pwm=1.000
Stats 1334.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14568 bytes_read=205508 bytes_retransmit=9 bytes_invalid=0 send_seq=1704 receive_seq=1704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006889  heater_bed: target=75 temp=97.9 pwm=0.000 mainboard: temp=36.6 pi: temp=53.6 sysload=0.38 cputime=21.779 memavail=3398660 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=149.7 pwm=1.000
Stats 1335.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14574 bytes_read=205653 bytes_retransmit=9 bytes_invalid=0 send_seq=1705 receive_seq=1705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=98.8 pwm=0.000 mainboard: temp=36.4 pi: temp=55.0 sysload=0.38 cputime=21.792 memavail=3398412 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=151.2 pwm=1.000
Stats 1336.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14580 bytes_read=205813 bytes_retransmit=9 bytes_invalid=0 send_seq=1706 receive_seq=1706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006870  heater_bed: target=75 temp=99.4 pwm=0.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.35 cputime=21.805 memavail=3398188 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=153.5 pwm=1.000
Stats 1337.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14602 bytes_read=206005 bytes_retransmit=9 bytes_invalid=0 send_seq=1708 receive_seq=1708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006859  heater_bed: target=75 temp=97.9 pwm=0.000 mainboard: temp=36.4 pi: temp=52.6 sysload=0.35 cputime=21.818 memavail=3398188 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=152.7 pwm=1.000
Stats 1338.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14614 bytes_read=206166 bytes_retransmit=9 bytes_invalid=0 send_seq=1710 receive_seq=1710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006859  heater_bed: target=75 temp=98.3 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.35 cputime=21.837 memavail=3397740 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=153.6 pwm=1.000
Stats 1339.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14620 bytes_read=206326 bytes_retransmit=9 bytes_invalid=0 send_seq=1711 receive_seq=1711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006865  heater_bed: target=75 temp=98.9 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.35 cputime=21.860 memavail=3397516 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=155.3 pwm=1.000
Stats 1340.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14626 bytes_read=206499 bytes_retransmit=9 bytes_invalid=0 send_seq=1712 receive_seq=1712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006869  heater_bed: target=75 temp=99.8 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.35 cputime=21.883 memavail=3397516 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=156.6 pwm=1.000
Stats 1341.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14648 bytes_read=206649 bytes_retransmit=9 bytes_invalid=0 send_seq=1714 receive_seq=1714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006874  heater_bed: target=75 temp=101.2 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.32 cputime=21.905 memavail=3397664 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=159.0 pwm=1.000
Stats 1342.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14654 bytes_read=206822 bytes_retransmit=9 bytes_invalid=0 send_seq=1715 receive_seq=1715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006876  heater_bed: target=75 temp=98.7 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.32 cputime=21.926 memavail=3397936 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=157.7 pwm=1.000
Stats 1343.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14660 bytes_read=206990 bytes_retransmit=9 bytes_invalid=0 send_seq=1716 receive_seq=1716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006876  heater_bed: target=75 temp=100.7 pwm=0.000 mainboard: temp=36.4 pi: temp=53.1 sysload=0.32 cputime=21.947 memavail=3396896 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=159.9 pwm=1.000
Stats 1344.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14666 bytes_read=207135 bytes_retransmit=9 bytes_invalid=0 send_seq=1717 receive_seq=1717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=98.8 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.32 cputime=21.969 memavail=3396400 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=159.7 pwm=1.000
Stats 1345.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14688 bytes_read=207300 bytes_retransmit=9 bytes_invalid=0 send_seq=1719 receive_seq=1719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=97.4 pwm=0.983 mainboard: temp=36.5 pi: temp=53.6 sysload=0.32 cputime=21.992 memavail=3395680 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=161.5 pwm=1.000
Stats 1346.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14723 bytes_read=207483 bytes_retransmit=9 bytes_invalid=0 send_seq=1722 receive_seq=1722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006893  heater_bed: target=75 temp=95.9 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.38 cputime=22.014 memavail=3395932 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=160.0 pwm=1.000
Stats 1347.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14729 bytes_read=207642 bytes_retransmit=9 bytes_invalid=0 send_seq=1723 receive_seq=1723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006889  heater_bed: target=75 temp=96.0 pwm=0.000 mainboard: temp=36.4 pi: temp=53.1 sysload=0.38 cputime=22.035 memavail=3400648 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=161.1 pwm=1.000
Stats 1348.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14735 bytes_read=207802 bytes_retransmit=9 bytes_invalid=0 send_seq=1724 receive_seq=1724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006877  heater_bed: target=75 temp=96.2 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.38 cputime=22.050 memavail=3399232 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=161.8 pwm=1.000
Stats 1349.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14741 bytes_read=207975 bytes_retransmit=9 bytes_invalid=0 send_seq=1725 receive_seq=1725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006871  heater_bed: target=75 temp=96.0 pwm=0.000 mainboard: temp=36.6 pi: temp=54.5 sysload=0.38 cputime=22.063 memavail=3399232 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=162.9 pwm=1.000
Stats 1350.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14763 bytes_read=208125 bytes_retransmit=9 bytes_invalid=0 send_seq=1727 receive_seq=1727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006860  heater_bed: target=75 temp=95.7 pwm=0.000 mainboard: temp=36.6 pi: temp=55.0 sysload=0.38 cputime=22.075 memavail=3398732 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=163.6 pwm=1.000
Stats 1351.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14769 bytes_read=208285 bytes_retransmit=9 bytes_invalid=0 send_seq=1728 receive_seq=1728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852  heater_bed: target=75 temp=95.6 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.35 cputime=22.088 memavail=3398736 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=164.4 pwm=1.000
Stats 1352.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14775 bytes_read=208472 bytes_retransmit=9 bytes_invalid=0 send_seq=1729 receive_seq=1729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006843  heater_bed: target=75 temp=95.4 pwm=0.000 mainboard: temp=36.5 pi: temp=54.5 sysload=0.35 cputime=22.101 memavail=3398740 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=165.5 pwm=1.000
Stats 1353.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14781 bytes_read=208612 bytes_retransmit=9 bytes_invalid=0 send_seq=1730 receive_seq=1730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846  heater_bed: target=75 temp=95.2 pwm=0.000 mainboard: temp=36.6 pi: temp=55.0 sysload=0.35 cputime=22.119 memavail=3401592 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=166.1 pwm=1.000
Stats 1354.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14803 bytes_read=208774 bytes_retransmit=9 bytes_invalid=0 send_seq=1732 receive_seq=1732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006843  heater_bed: target=75 temp=95.2 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.35 cputime=22.139 memavail=3401592 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=166.8 pwm=1.000
Stats 1355.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14809 bytes_read=208947 bytes_retransmit=9 bytes_invalid=0 send_seq=1733 receive_seq=1733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006847  heater_bed: target=75 temp=95.5 pwm=0.000 mainboard: temp=36.5 pi: temp=54.5 sysload=0.35 cputime=22.160 memavail=3401088 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=168.2 pwm=1.000
Stats 1356.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14815 bytes_read=209092 bytes_retransmit=9 bytes_invalid=0 send_seq=1734 receive_seq=1734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006876  heater_bed: target=75 temp=94.9 pwm=0.000 mainboard: temp=36.6 pi: temp=53.1 sysload=0.40 cputime=22.180 memavail=3401100 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=168.7 pwm=1.000
Stats 1357.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14821 bytes_read=209266 bytes_retransmit=9 bytes_invalid=0 send_seq=1735 receive_seq=1735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006872  heater_bed: target=75 temp=94.7 pwm=0.000 mainboard: temp=36.5 pi: temp=53.6 sysload=0.40 cputime=22.201 memavail=3401100 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=169.4 pwm=1.000
Stats 1358.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14843 bytes_read=209444 bytes_retransmit=9 bytes_invalid=0 send_seq=1737 receive_seq=1737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006860  heater_bed: target=75 temp=95.3 pwm=0.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.40 cputime=22.217 memavail=3399956 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=170.9 pwm=1.000
Stats 1359.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14849 bytes_read=209589 bytes_retransmit=9 bytes_invalid=0 send_seq=1738 receive_seq=1738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852  heater_bed: target=75 temp=95.2 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.40 cputime=22.229 memavail=3399956 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=171.8 pwm=1.000
Stats 1360.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14855 bytes_read=209749 bytes_retransmit=9 bytes_invalid=0 send_seq=1739 receive_seq=1739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006850  heater_bed: target=75 temp=95.4 pwm=0.000 mainboard: temp=36.5 pi: temp=54.5 sysload=0.40 cputime=22.241 memavail=3399956 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=172.7 pwm=1.000
Stats 1361.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14861 bytes_read=209922 bytes_retransmit=9 bytes_invalid=0 send_seq=1740 receive_seq=1740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006842  heater_bed: target=75 temp=95.0 pwm=0.000 mainboard: temp=36.2 pi: temp=54.5 sysload=0.45 cputime=22.254 memavail=3399956 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=173.5 pwm=1.000
Stats 1362.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14878 bytes_read=210081 bytes_retransmit=9 bytes_invalid=0 send_seq=1741 receive_seq=1741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846  heater_bed: target=75 temp=95.0 pwm=0.000 mainboard: temp=36.5 pi: temp=54.5 sysload=0.45 cputime=22.268 memavail=3400844 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=174.2 pwm=1.000
Stats 1363.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14884 bytes_read=210241 bytes_retransmit=9 bytes_invalid=0 send_seq=1742 receive_seq=1742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006849  heater_bed: target=75 temp=94.9 pwm=0.000 mainboard: temp=36.6 pi: temp=54.5 sysload=0.45 cputime=22.287 memavail=3399464 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=175.1 pwm=1.000
Stats 1364.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14890 bytes_read=210406 bytes_retransmit=9 bytes_invalid=0 send_seq=1743 receive_seq=1743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006853  heater_bed: target=75 temp=94.9 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.45 cputime=22.309 memavail=3398988 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=176.1 pwm=1.000
Stats 1365.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14896 bytes_read=210551 bytes_retransmit=9 bytes_invalid=0 send_seq=1744 receive_seq=1744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006854  heater_bed: target=75 temp=94.7 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.45 cputime=22.330 memavail=3398484 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=176.9 pwm=1.000
Stats 1366.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14918 bytes_read=210716 bytes_retransmit=9 bytes_invalid=0 send_seq=1746 receive_seq=1746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006861  heater_bed: target=75 temp=94.4 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.41 cputime=22.353 memavail=3398484 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=177.6 pwm=1.000
Stats 1367.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14924 bytes_read=210903 bytes_retransmit=9 bytes_invalid=0 send_seq=1747 receive_seq=1747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006865  heater_bed: target=75 temp=98.2 pwm=0.000 mainboard: temp=36.4 pi: temp=54.0 sysload=0.41 cputime=22.374 memavail=3398484 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=179.5 pwm=1.000
Stats 1368.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14930 bytes_read=211048 bytes_retransmit=9 bytes_invalid=0 send_seq=1748 receive_seq=1748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006870  heater_bed: target=75 temp=94.6 pwm=0.000 mainboard: temp=36.5 pi: temp=53.6 sysload=0.41 cputime=22.396 memavail=3397324 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=179.5 pwm=1.000
Stats 1369.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14936 bytes_read=211208 bytes_retransmit=9 bytes_invalid=0 send_seq=1749 receive_seq=1749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006886  heater_bed: target=75 temp=95.4 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.41 cputime=22.417 memavail=3397324 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=181.0 pwm=1.000
Stats 1370.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14958 bytes_read=211386 bytes_retransmit=9 bytes_invalid=0 send_seq=1751 receive_seq=1751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006889  heater_bed: target=75 temp=93.7 pwm=0.050 mainboard: temp=36.5 pi: temp=53.1 sysload=0.41 cputime=22.439 memavail=3397324 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=180.8 pwm=1.000
Stats 1371.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14993 bytes_read=211541 bytes_retransmit=9 bytes_invalid=0 send_seq=1754 receive_seq=1754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006892  heater_bed: target=75 temp=92.9 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.46 cputime=22.461 memavail=3397324 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=181.1 pwm=1.000
Stats 1372.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14999 bytes_read=211715 bytes_retransmit=9 bytes_invalid=0 send_seq=1755 receive_seq=1755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=93.4 pwm=0.000 mainboard: temp=36.6 pi: temp=53.1 sysload=0.46 cputime=22.482 memavail=3397324 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=182.2 pwm=1.000
Stats 1373.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15005 bytes_read=211888 bytes_retransmit=9 bytes_invalid=0 send_seq=1756 receive_seq=1756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006880  heater_bed: target=75 temp=93.0 pwm=0.000 mainboard: temp=36.5 pi: temp=53.1 sysload=0.46 cputime=22.497 memavail=3397324 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=183.0 pwm=1.000
Stats 1374.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15011 bytes_read=212033 bytes_retransmit=9 bytes_invalid=0 send_seq=1757 receive_seq=1757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006871  heater_bed: target=75 temp=93.2 pwm=0.000 mainboard: temp=36.5 pi: temp=54.5 sysload=0.46 cputime=22.509 memavail=3397324 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=183.8 pwm=1.000
Stats 1375.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15033 bytes_read=212191 bytes_retransmit=9 bytes_invalid=0 send_seq=1759 receive_seq=1759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006867  heater_bed: target=75 temp=92.8 pwm=0.000 mainboard: temp=36.5 pi: temp=53.6 sysload=0.46 cputime=22.521 memavail=3397324 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=184.5 pwm=1.000
Stats 1376.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15039 bytes_read=212364 bytes_retransmit=9 bytes_invalid=0 send_seq=1760 receive_seq=1760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006857  heater_bed: target=75 temp=92.7 pwm=0.000 mainboard: temp=36.4 pi: temp=53.1 sysload=0.50 cputime=22.533 memavail=3397328 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=185.4 pwm=1.000
Stats 1377.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15045 bytes_read=212523 bytes_retransmit=9 bytes_invalid=0 send_seq=1761 receive_seq=1761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006855  heater_bed: target=75 temp=93.0 pwm=0.000 mainboard: temp=36.4 pi: temp=55.0 sysload=0.50 cputime=22.545 memavail=3397328 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=186.4 pwm=1.000
Stats 1378.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15051 bytes_read=212683 bytes_retransmit=9 bytes_invalid=0 send_seq=1762 receive_seq=1762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006858  heater_bed: target=75 temp=92.6 pwm=0.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.50 cputime=22.564 memavail=3397088 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=186.9 pwm=1.000
Stats 1379.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15073 bytes_read=212861 bytes_retransmit=9 bytes_invalid=0 send_seq=1764 receive_seq=1764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006857  heater_bed: target=75 temp=92.5 pwm=0.000 mainboard: temp=36.5 pi: temp=53.6 sysload=0.50 cputime=22.586 memavail=3397088 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=187.8 pwm=1.000
Stats 1380.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15079 bytes_read=213006 bytes_retransmit=9 bytes_invalid=0 send_seq=1765 receive_seq=1765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006858  heater_bed: target=75 temp=92.3 pwm=0.000 mainboard: temp=36.6 pi: temp=53.6 sysload=0.50 cputime=22.607 memavail=3397088 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=188.6 pwm=1.000
Stats 1381.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15085 bytes_read=213166 bytes_retransmit=9 bytes_invalid=0 send_seq=1766 receive_seq=1766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006894  heater_bed: target=75 temp=92.9 pwm=0.000 mainboard: temp=36.6 pi: temp=53.1 sysload=0.46 cputime=22.630 memavail=3397092 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=189.4 pwm=1.000
Stats 1382.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15091 bytes_read=213353 bytes_retransmit=9 bytes_invalid=0 send_seq=1767 receive_seq=1767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891  heater_bed: target=75 temp=98.3 pwm=0.000 mainboard: temp=36.5 pi: temp=53.1 sysload=0.46 cputime=22.653 memavail=3397092 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=192.3 pwm=1.000
Stats 1383.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15129 bytes_read=213508 bytes_retransmit=9 bytes_invalid=0 send_seq=1770 receive_seq=1770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006892  heater_bed: target=75 temp=91.8 pwm=1.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.46 cputime=22.669 memavail=3396172 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=190.6 pwm=1.000
Stats 1384.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15135 bytes_read=213668 bytes_retransmit=9 bytes_invalid=0 send_seq=1771 receive_seq=1771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400006886  heater_bed: target=75 temp=91.3 pwm=0.000 mainboard: temp=36.6 pi: temp=54.5 sysload=0.46 cputime=22.680 memavail=3396172 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=191.2 pwm=1.000
Stats 1385.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15154 bytes_read=213843 bytes_retransmit=9 bytes_invalid=0 send_seq=1773 receive_seq=1773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006878  heater_bed: target=75 temp=91.1 pwm=0.000 mainboard: temp=36.5 pi: temp=54.5 sysload=0.46 cputime=22.693 memavail=3395920 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=192.0 pwm=1.000
Stats 1386.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15160 bytes_read=213984 bytes_retransmit=9 bytes_invalid=0 send_seq=1774 receive_seq=1774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006867  heater_bed: target=75 temp=90.8 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.42 cputime=22.704 memavail=3395952 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=192.6 pwm=1.000
Stats 1387.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15182 bytes_read=214163 bytes_retransmit=9 bytes_invalid=0 send_seq=1776 receive_seq=1776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006856  heater_bed: target=75 temp=90.6 pwm=0.000 mainboard: temp=36.6 pi: temp=54.5 sysload=0.42 cputime=22.717 memavail=3395952 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=193.2 pwm=1.000
Stats 1388.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15188 bytes_read=214336 bytes_retransmit=9 bytes_invalid=0 send_seq=1777 receive_seq=1777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846  heater_bed: target=75 temp=90.5 pwm=0.000 mainboard: temp=36.5 pi: temp=54.5 sysload=0.42 cputime=22.734 memavail=3395704 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=194.1 pwm=1.000
Stats 1389.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15194 bytes_read=214481 bytes_retransmit=9 bytes_invalid=0 send_seq=1778 receive_seq=1778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006847  heater_bed: target=75 temp=90.4 pwm=0.000 mainboard: temp=36.5 pi: temp=54.0 sysload=0.42 cputime=22.755 memavail=3395704 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=194.7 pwm=1.000
Stats 1390.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15200 bytes_read=214655 bytes_retransmit=9 bytes_invalid=0 send_seq=1779 receive_seq=1779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006848  heater_bed: target=75 temp=90.2 pwm=0.000 mainboard: temp=36.4 pi: temp=54.5 sysload=0.42 cputime=22.779 memavail=3395704 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=195.4 pwm=1.000
Stats 1391.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15206 bytes_read=214814 bytes_retransmit=9 bytes_invalid=0 send_seq=1780 receive_seq=1780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006849  heater_bed: target=75 temp=90.2 pwm=0.000 mainboard: temp=36.5 pi: temp=53.1 sysload=0.39 cputime=22.801 memavail=3395704 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=196.3 pwm=1.000
Stats 1392.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15228 bytes_read=214978 bytes_retransmit=9 bytes_invalid=0 send_seq=1782 receive_seq=1782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006850  heater_bed: target=75 temp=90.2 pwm=0.000 mainboard: temp=36.6 pi: temp=53.1 sysload=0.39 cputime=22.823 memavail=3395960 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=197.1 pwm=1.000
Stats 1393.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15234 bytes_read=215152 bytes_retransmit=9 bytes_invalid=0 send_seq=1783 receive_seq=1783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006849  heater_bed: target=75 temp=89.9 pwm=0.000 mainboard: temp=36.5 pi: temp=53.6 sysload=0.39 cputime=22.845 memavail=3395288 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=197.6 pwm=1.000
Stats 1394.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15240 bytes_read=215311 bytes_retransmit=9 bytes_invalid=0 send_seq=1784 receive_seq=1784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006845  heater_bed: target=75 temp=90.0 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.39 cputime=22.875 memavail=3395064 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=198.5 pwm=1.000
Stats 1395.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15246 bytes_read=215456 bytes_retransmit=9 bytes_invalid=0 send_seq=1785 receive_seq=1785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846  heater_bed: target=75 temp=90.0 pwm=0.000 mainboard: temp=36.5 pi: temp=53.1 sysload=0.39 cputime=22.897 memavail=3398168 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=199.4 pwm=1.000
Stats 1396.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15268 bytes_read=215629 bytes_retransmit=9 bytes_invalid=0 send_seq=1787 receive_seq=1787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852  heater_bed: target=75 temp=89.9 pwm=0.000 mainboard: temp=36.5 pi: temp=53.6 sysload=0.44 cputime=22.925 memavail=3397588 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=200.0 pwm=1.000
Stats 1397.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15274 bytes_read=215800 bytes_retransmit=9 bytes_invalid=0 send_seq=1788 receive_seq=1788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006860  heater_bed: target=75 temp=89.9 pwm=0.000 mainboard: temp=36.6 pi: temp=53.6 sysload=0.44 cputime=22.944 memavail=3397588 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=200.9 pwm=1.000
Stats 1398.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15280 bytes_read=215945 bytes_retransmit=9 bytes_invalid=0 send_seq=1789 receive_seq=1789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1 freq=400006864  heater_bed: target=75 temp=89.8 pwm=0.000 mainboard: temp=36.4 pi: temp=53.6 sysload=0.44 cputime=22.958 memavail=3396400 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=201.5 pwm=1.000
Stats 1399.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15292 bytes_read=216135 bytes_retransmit=9 bytes_invalid=0 send_seq=1791 receive_seq=1791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006844  heater_bed: target=75 temp=89.4 pwm=0.000 mainboard: temp=36.6 pi: temp=55.0 sysload=0.44 cputime=22.968 memavail=3396400 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=202.1 pwm=1.000
Stats 1400.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15314 bytes_read=216299 bytes_retransmit=9 bytes_invalid=0 send_seq=1793 receive_seq=1793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006834  heater_bed: target=75 temp=89.2 pwm=0.000 mainboard: temp=36.6 pi: temp=54.5 sysload=0.44 cputime=22.979 memavail=3396548 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=202.9 pwm=1.000
Stats 1401.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15320 bytes_read=216444 bytes_retransmit=9 bytes_invalid=0 send_seq=1794 receive_seq=1794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826  heater_bed: target=75 temp=89.0 pwm=0.000 mainboard: temp=36.6 pi: temp=53.6 sysload=0.40 cputime=22.988 memavail=3397916 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=203.4 pwm=1.000
Stats 1402.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15326 bytes_read=216632 bytes_retransmit=9 bytes_invalid=0 send_seq=1795 receive_seq=1795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006819  heater_bed: target=75 temp=89.0 pwm=0.000 mainboard: temp=36.6 pi: temp=53.6 sysload=0.40 cputime=22.998 memavail=3397916 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=204.1 pwm=1.000
Stats 1403.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15332 bytes_read=216791 bytes_retransmit=9 bytes_invalid=0 send_seq=1796 receive_seq=1796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006821  heater_bed: target=75 temp=89.1 pwm=0.000 mainboard: temp=36.6 pi: temp=55.0 sysload=0.40 cputime=23.014 memavail=3400412 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=205.0 pwm=1.000
Stats 1404.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15354 bytes_read=216941 bytes_retransmit=9 bytes_invalid=0 send_seq=1798 receive_seq=1798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006824  heater_bed: target=75 temp=88.8 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.40 cputime=23.031 memavail=3400412 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=205.5 pwm=1.000
Stats 1405.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15360 bytes_read=217115 bytes_retransmit=9 bytes_invalid=0 send_seq=1799 receive_seq=1799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826  heater_bed: target=75 temp=89.2 pwm=0.000 mainboard: temp=36.7 pi: temp=54.0 sysload=0.40 cputime=23.048 memavail=3399656 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=206.5 pwm=1.000
Stats 1406.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=15366 bytes_read=217274 bytes_retransmit=9 bytes_invalid=0 send_seq=1800 receive_seq=1800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006831  heater_bed: target=75 temp=89.1 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.45 cputime=23.064 memavail=3399672 print_time=1119.302 buffer_time=0.000 print_stall=0 extruder: target=245 temp=207.3 pwm=1.000
Starting SD card print (position 0)
Stats 1407.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000029 mcu_task_stddev=0.000201 bytes_write=15675 bytes_read=217661 bytes_retransmit=9 bytes_invalid=0 send_seq=1826 receive_seq=1826 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006821 sd_pos=48468 heater_bed: target=75 temp=89.1 pwm=0.000 mainboard: temp=36.6 pi: temp=53.6 sysload=0.45 cputime=23.169 memavail=3391912 print_time=1277.706 buffer_time=0.000 print_stall=0 extruder: target=245 temp=208.0 pwm=1.000
Stats 1408.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000029 mcu_task_stddev=0.000201 bytes_write=16130 bytes_read=218177 bytes_retransmit=9 bytes_invalid=0 send_seq=1865 receive_seq=1865 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006821 sd_pos=48468 heater_bed: target=75 temp=88.9 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.45 cputime=23.232 memavail=3391348 print_time=1278.706 buffer_time=0.000 print_stall=0 extruder: target=245 temp=208.5 pwm=1.000
Stats 1409.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000029 mcu_task_stddev=0.000201 bytes_write=16595 bytes_read=218683 bytes_retransmit=9 bytes_invalid=0 send_seq=1906 receive_seq=1905 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006823 sd_pos=48468 heater_bed: target=75 temp=89.4 pwm=0.000 mainboard: temp=36.7 pi: temp=54.5 sysload=0.45 cputime=23.295 memavail=3391348 print_time=1279.707 buffer_time=0.000 print_stall=0 extruder: target=245 temp=209.7 pwm=1.000
Stats 1410.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000029 mcu_task_stddev=0.000201 bytes_write=17039 bytes_read=219183 bytes_retransmit=9 bytes_invalid=0 send_seq=1945 receive_seq=1945 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006812 sd_pos=48468 heater_bed: target=75 temp=89.3 pwm=0.000 mainboard: temp=36.7 pi: temp=55.0 sysload=0.45 cputime=23.358 memavail=3394688 print_time=1280.708 buffer_time=0.000 print_stall=0 extruder: target=245 temp=210.4 pwm=1.000
Stats 1411.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000029 mcu_task_stddev=0.000201 bytes_write=17470 bytes_read=219689 bytes_retransmit=9 bytes_invalid=0 send_seq=1982 receive_seq=1982 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006803 sd_pos=48468 heater_bed: target=75 temp=89.6 pwm=0.000 mainboard: temp=36.7 pi: temp=54.0 sysload=0.50 cputime=23.422 memavail=3394436 print_time=1281.708 buffer_time=0.000 print_stall=0 extruder: target=245 temp=211.3 pwm=1.000
Stats 1412.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=17915 bytes_read=220193 bytes_retransmit=9 bytes_invalid=0 send_seq=2019 receive_seq=2019 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=90.1 pwm=0.000 mainboard: temp=36.7 pi: temp=54.5 sysload=0.50 cputime=23.513 memavail=3394216 print_time=1282.709 buffer_time=0.000 print_stall=0 extruder: target=245 temp=212.6 pwm=1.000
Stats 1413.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=18375 bytes_read=220693 bytes_retransmit=9 bytes_invalid=0 send_seq=2059 receive_seq=2059 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006832 sd_pos=48468 heater_bed: target=75 temp=89.8 pwm=0.000 mainboard: temp=36.7 pi: temp=54.0 sysload=0.50 cputime=23.631 memavail=3394216 print_time=1283.709 buffer_time=0.000 print_stall=0 extruder: target=245 temp=212.8 pwm=1.000
Stats 1414.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=18814 bytes_read=221204 bytes_retransmit=9 bytes_invalid=0 send_seq=2097 receive_seq=2097 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006827 sd_pos=48468 heater_bed: target=75 temp=89.6 pwm=0.000 mainboard: temp=36.7 pi: temp=53.1 sysload=0.50 cputime=23.741 memavail=3393988 print_time=1284.711 buffer_time=0.000 print_stall=0 extruder: target=245 temp=213.4 pwm=1.000
Stats 1415.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=19248 bytes_read=221695 bytes_retransmit=9 bytes_invalid=0 send_seq=2134 receive_seq=2134 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=90.1 pwm=0.000 mainboard: temp=36.6 pi: temp=54.5 sysload=0.50 cputime=23.853 memavail=3394016 print_time=1285.711 buffer_time=0.000 print_stall=0 extruder: target=245 temp=214.5 pwm=1.000
Stats 1416.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=19698 bytes_read=222185 bytes_retransmit=9 bytes_invalid=0 send_seq=2172 receive_seq=2172 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006822 sd_pos=48468 heater_bed: target=75 temp=89.7 pwm=0.000 mainboard: temp=36.7 pi: temp=55.0 sysload=0.46 cputime=23.963 memavail=3394036 print_time=1286.713 buffer_time=0.000 print_stall=0 extruder: target=245 temp=215.0 pwm=1.000
Stats 1417.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=20133 bytes_read=222692 bytes_retransmit=9 bytes_invalid=0 send_seq=2207 receive_seq=2207 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006817 sd_pos=48468 heater_bed: target=75 temp=89.4 pwm=0.000 mainboard: temp=36.6 pi: temp=53.6 sysload=0.46 cputime=24.072 memavail=3394036 print_time=1287.714 buffer_time=0.000 print_stall=0 extruder: target=245 temp=215.3 pwm=1.000
Stats 1418.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=20591 bytes_read=223192 bytes_retransmit=9 bytes_invalid=0 send_seq=2247 receive_seq=2247 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006815 sd_pos=48468 heater_bed: target=75 temp=89.9 pwm=0.000 mainboard: temp=36.8 pi: temp=53.6 sysload=0.46 cputime=24.184 memavail=3394040 print_time=1288.715 buffer_time=0.000 print_stall=0 extruder: target=245 temp=216.9 pwm=1.000
Stats 1419.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=21043 bytes_read=223682 bytes_retransmit=9 bytes_invalid=0 send_seq=2285 receive_seq=2285 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006815 sd_pos=48468 heater_bed: target=75 temp=89.7 pwm=1.000 mainboard: temp=36.7 pi: temp=53.1 sysload=0.46 cputime=24.294 memavail=3393376 print_time=1289.719 buffer_time=0.000 print_stall=0 extruder: target=245 temp=216.6 pwm=1.000
Stats 1420.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=21475 bytes_read=224178 bytes_retransmit=9 bytes_invalid=0 send_seq=2320 receive_seq=2320 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006814 sd_pos=48468 heater_bed: target=75 temp=88.1 pwm=0.920 mainboard: temp=36.7 pi: temp=54.0 sysload=0.46 cputime=24.406 memavail=3393416 print_time=1290.721 buffer_time=0.000 print_stall=0 extruder: target=245 temp=217.0 pwm=1.000
Stats 1421.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=21955 bytes_read=224684 bytes_retransmit=9 bytes_invalid=0 send_seq=2360 receive_seq=2360 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006822 sd_pos=48468 heater_bed: target=75 temp=88.2 pwm=0.000 mainboard: temp=36.7 pi: temp=54.5 sysload=0.42 cputime=24.520 memavail=3393552 print_time=1291.721 buffer_time=0.000 print_stall=0 extruder: target=245 temp=217.8 pwm=1.000
Stats 1422.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=22403 bytes_read=225197 bytes_retransmit=9 bytes_invalid=0 send_seq=2400 receive_seq=2400 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006863 sd_pos=48468 heater_bed: target=75 temp=88.2 pwm=0.000 mainboard: temp=36.7 pi: temp=54.5 sysload=0.42 cputime=24.627 memavail=3393576 print_time=1292.722 buffer_time=0.000 print_stall=0 extruder: target=245 temp=218.3 pwm=1.000
Stats 1423.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=22837 bytes_read=225703 bytes_retransmit=9 bytes_invalid=0 send_seq=2437 receive_seq=2437 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006869 sd_pos=48468 heater_bed: target=75 temp=88.3 pwm=0.000 mainboard: temp=36.6 pi: temp=53.6 sysload=0.42 cputime=24.738 memavail=3392820 print_time=1293.722 buffer_time=0.000 print_stall=0 extruder: target=245 temp=219.0 pwm=1.000
Stats 1424.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=23297 bytes_read=226217 bytes_retransmit=9 bytes_invalid=0 send_seq=2477 receive_seq=2477 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006857 sd_pos=48468 heater_bed: target=75 temp=88.4 pwm=0.000 mainboard: temp=36.7 pi: temp=53.6 sysload=0.42 cputime=24.846 memavail=3392824 print_time=1294.722 buffer_time=0.000 print_stall=0 extruder: target=245 temp=219.8 pwm=1.000
Stats 1425.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=23737 bytes_read=226689 bytes_retransmit=9 bytes_invalid=0 send_seq=2513 receive_seq=2513 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006950 sd_pos=48468 heater_bed: target=75 temp=88.0 pwm=0.000 mainboard: temp=36.7 pi: temp=53.6 sysload=0.42 cputime=24.957 memavail=3392616 print_time=1295.723 buffer_time=0.000 print_stall=0 extruder: target=245 temp=220.3 pwm=1.000
Stats 1426.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=24176 bytes_read=227200 bytes_retransmit=9 bytes_invalid=0 send_seq=2551 receive_seq=2551 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006935 sd_pos=48468 heater_bed: target=75 temp=87.8 pwm=0.000 mainboard: temp=36.7 pi: temp=54.0 sysload=0.47 cputime=25.072 memavail=3392628 print_time=1296.723 buffer_time=0.000 print_stall=0 extruder: target=245 temp=220.9 pwm=1.000
Stats 1427.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=24641 bytes_read=227732 bytes_retransmit=9 bytes_invalid=0 send_seq=2592 receive_seq=2592 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006924 sd_pos=48468 heater_bed: target=75 temp=87.8 pwm=0.000 mainboard: temp=36.7 pi: temp=54.5 sysload=0.47 cputime=25.185 memavail=3392432 print_time=1297.724 buffer_time=0.000 print_stall=0 extruder: target=245 temp=221.6 pwm=1.000
Stats 1428.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=25065 bytes_read=228196 bytes_retransmit=9 bytes_invalid=0 send_seq=2627 receive_seq=2627 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006924 sd_pos=48468 heater_bed: target=75 temp=87.8 pwm=0.000 mainboard: temp=36.6 pi: temp=54.0 sysload=0.47 cputime=25.291 memavail=3392440 print_time=1298.724 buffer_time=0.000 print_stall=0 extruder: target=245 temp=222.1 pwm=1.000
Stats 1429.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=25512 bytes_read=228703 bytes_retransmit=9 bytes_invalid=0 send_seq=2665 receive_seq=2665 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006906 sd_pos=48468 heater_bed: target=75 temp=87.6 pwm=0.000 mainboard: temp=36.6 pi: temp=53.1 sysload=0.47 cputime=25.374 memavail=3392456 print_time=1299.725 buffer_time=0.000 print_stall=0 extruder: target=245 temp=222.8 pwm=1.000
Stats 1430.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=25980 bytes_read=229222 bytes_retransmit=9 bytes_invalid=0 send_seq=2706 receive_seq=2706 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006886 sd_pos=48468 heater_bed: target=75 temp=87.8 pwm=0.000 mainboard: temp=36.7 pi: temp=53.6 sysload=0.47 cputime=25.436 memavail=3392476 print_time=1300.725 buffer_time=0.000 print_stall=0 extruder: target=245 temp=223.7 pwm=1.000
Stats 1431.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000428 mcu_task_stddev=0.000000 bytes_write=26411 bytes_read=229699 bytes_retransmit=9 bytes_invalid=0 send_seq=2743 receive_seq=2743 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006894 sd_pos=48468 heater_bed: target=75 temp=88.1 pwm=0.000 mainboard: temp=36.7 pi: temp=54.5 sysload=0.51 cputime=25.499 memavail=3392504 print_time=1301.725 buffer_time=0.000 print_stall=0 extruder: target=245 temp=224.4 pwm=1.000
Stats 1432.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=26845 bytes_read=230218 bytes_retransmit=9 bytes_invalid=0 send_seq=2780 receive_seq=2780 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006874 sd_pos=48468 heater_bed: target=75 temp=88.2 pwm=0.000 mainboard: temp=36.7 pi: temp=54.5 sysload=0.51 cputime=25.564 memavail=3392284 print_time=1302.726 buffer_time=0.000 print_stall=0 extruder: target=245 temp=225.1 pwm=1.000
Stats 1433.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=27290 bytes_read=230709 bytes_retransmit=9 bytes_invalid=0 send_seq=2817 receive_seq=2817 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006861 sd_pos=48468 heater_bed: target=75 temp=89.1 pwm=0.000 mainboard: temp=36.8 pi: temp=54.5 sysload=0.51 cputime=25.626 memavail=3392444 print_time=1303.727 buffer_time=0.000 print_stall=0 extruder: target=245 temp=226.5 pwm=1.000
Stats 1434.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=27742 bytes_read=231196 bytes_retransmit=9 bytes_invalid=0 send_seq=2856 receive_seq=2856 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006861 sd_pos=48468 heater_bed: target=75 temp=89.3 pwm=0.998 mainboard: temp=36.7 pi: temp=54.0 sysload=0.51 cputime=25.720 memavail=3392444 print_time=1304.727 buffer_time=0.000 print_stall=0 extruder: target=245 temp=227.1 pwm=1.000
Stats 1435.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=28219 bytes_read=231720 bytes_retransmit=9 bytes_invalid=0 send_seq=2895 receive_seq=2895 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006863 sd_pos=48468 heater_bed: target=75 temp=88.9 pwm=0.000 mainboard: temp=36.8 pi: temp=53.6 sysload=0.51 cputime=25.830 memavail=3391956 print_time=1305.728 buffer_time=0.000 print_stall=0 extruder: target=245 temp=227.5 pwm=1.000
Stats 1436.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=28660 bytes_read=232221 bytes_retransmit=9 bytes_invalid=0 send_seq=2934 receive_seq=2934 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006876 sd_pos=48468 heater_bed: target=75 temp=89.6 pwm=0.000 mainboard: temp=36.8 pi: temp=54.0 sysload=0.47 cputime=25.942 memavail=3391968 print_time=1306.728 buffer_time=0.000 print_stall=0 extruder: target=245 temp=228.8 pwm=1.000
Stats 1437.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=29104 bytes_read=232721 bytes_retransmit=9 bytes_invalid=0 send_seq=2973 receive_seq=2973 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006875 sd_pos=48468 heater_bed: target=75 temp=90.7 pwm=0.000 mainboard: temp=36.8 pi: temp=53.1 sysload=0.47 cputime=26.029 memavail=3391980 print_time=1307.729 buffer_time=0.000 print_stall=0 extruder: target=245 temp=229.5 pwm=1.000
Stats 1438.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=29597 bytes_read=233237 bytes_retransmit=9 bytes_invalid=0 send_seq=3013 receive_seq=3012 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006888 sd_pos=48468 heater_bed: target=75 temp=88.7 pwm=0.253 mainboard: temp=36.8 pi: temp=55.0 sysload=0.47 cputime=26.092 memavail=3391980 print_time=1308.730 buffer_time=0.000 print_stall=0 extruder: target=245 temp=229.4 pwm=1.000
Stats 1439.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=30055 bytes_read=233740 bytes_retransmit=9 bytes_invalid=0 send_seq=3051 receive_seq=3051 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006881 sd_pos=48468 heater_bed: target=75 temp=88.0 pwm=0.000 mainboard: temp=37.0 pi: temp=54.0 sysload=0.47 cputime=26.152 memavail=3392044 print_time=1309.730 buffer_time=0.000 print_stall=0 extruder: target=245 temp=229.5 pwm=1.000
Stats 1440.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=30499 bytes_read=234227 bytes_retransmit=9 bytes_invalid=0 send_seq=3090 receive_seq=3090 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006870 sd_pos=48468 heater_bed: target=75 temp=88.0 pwm=0.000 mainboard: temp=36.8 pi: temp=54.0 sysload=0.47 cputime=26.214 memavail=3392044 print_time=1310.732 buffer_time=0.000 print_stall=0 extruder: target=245 temp=230.3 pwm=1.000
Stats 1441.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=30935 bytes_read=234738 bytes_retransmit=9 bytes_invalid=0 send_seq=3128 receive_seq=3128 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006854 sd_pos=48468 heater_bed: target=75 temp=88.3 pwm=0.000 mainboard: temp=36.7 pi: temp=54.0 sysload=0.51 cputime=26.275 memavail=3392044 print_time=1311.732 buffer_time=0.000 print_stall=0 extruder: target=245 temp=231.0 pwm=1.000
Stats 1442.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=31404 bytes_read=235247 bytes_retransmit=9 bytes_invalid=0 send_seq=3167 receive_seq=3166 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006841 sd_pos=48468 heater_bed: target=75 temp=88.4 pwm=0.000 mainboard: temp=36.8 pi: temp=54.0 sysload=0.51 cputime=26.364 memavail=3392164 print_time=1312.732 buffer_time=0.000 print_stall=0 extruder: target=245 temp=231.9 pwm=0.968
Stats 1443.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=31835 bytes_read=235737 bytes_retransmit=9 bytes_invalid=0 send_seq=3204 receive_seq=3204 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006836 sd_pos=48468 heater_bed: target=75 temp=88.3 pwm=0.000 mainboard: temp=36.8 pi: temp=54.5 sysload=0.51 cputime=26.472 memavail=3391972 print_time=1313.733 buffer_time=0.000 print_stall=0 extruder: target=245 temp=232.2 pwm=0.968
Stats 1444.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=32274 bytes_read=236248 bytes_retransmit=9 bytes_invalid=0 send_seq=3242 receive_seq=3242 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006830 sd_pos=48468 heater_bed: target=75 temp=87.6 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.51 cputime=26.580 memavail=3392000 print_time=1314.733 buffer_time=0.000 print_stall=0 extruder: target=245 temp=232.5 pwm=0.968
Stats 1445.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=32734 bytes_read=236762 bytes_retransmit=9 bytes_invalid=0 send_seq=3282 receive_seq=3282 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=87.4 pwm=0.000 mainboard: temp=36.9 pi: temp=55.0 sysload=0.51 cputime=26.687 memavail=3391768 print_time=1315.734 buffer_time=0.000 print_stall=0 extruder: target=245 temp=233.1 pwm=0.968
Stats 1446.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=33185 bytes_read=237234 bytes_retransmit=9 bytes_invalid=0 send_seq=3318 receive_seq=3318 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006824 sd_pos=48468 heater_bed: target=75 temp=87.2 pwm=0.000 mainboard: temp=36.8 pi: temp=54.5 sysload=0.55 cputime=26.798 memavail=3391792 print_time=1316.735 buffer_time=0.000 print_stall=0 extruder: target=245 temp=233.6 pwm=0.932
Stats 1447.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=33630 bytes_read=237753 bytes_retransmit=9 bytes_invalid=0 send_seq=3355 receive_seq=3355 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006823 sd_pos=48468 heater_bed: target=75 temp=87.1 pwm=0.000 mainboard: temp=36.9 pi: temp=53.6 sysload=0.55 cputime=26.909 memavail=3391820 print_time=1317.736 buffer_time=0.000 print_stall=0 extruder: target=245 temp=234.0 pwm=1.000
Stats 1448.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=34101 bytes_read=238267 bytes_retransmit=9 bytes_invalid=0 send_seq=3395 receive_seq=3395 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006824 sd_pos=48468 heater_bed: target=75 temp=87.2 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.55 cputime=27.018 memavail=3391828 print_time=1318.736 buffer_time=0.000 print_stall=0 extruder: target=245 temp=234.8 pwm=0.846
Stats 1449.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=34562 bytes_read=238749 bytes_retransmit=9 bytes_invalid=0 send_seq=3433 receive_seq=3433 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006822 sd_pos=48468 heater_bed: target=75 temp=87.2 pwm=0.000 mainboard: temp=36.8 pi: temp=53.6 sysload=0.55 cputime=27.126 memavail=3391576 print_time=1319.737 buffer_time=0.000 print_stall=0 extruder: target=245 temp=235.3 pwm=0.907
Stats 1450.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=35037 bytes_read=239258 bytes_retransmit=9 bytes_invalid=0 send_seq=3472 receive_seq=3472 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=87.6 pwm=0.000 mainboard: temp=36.9 pi: temp=53.6 sysload=0.55 cputime=27.238 memavail=3391324 print_time=1320.738 buffer_time=0.000 print_stall=0 extruder: target=245 temp=236.0 pwm=0.778
Stats 1451.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=35495 bytes_read=239757 bytes_retransmit=9 bytes_invalid=0 send_seq=3509 receive_seq=3509 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006839 sd_pos=48468 heater_bed: target=75 temp=87.7 pwm=0.000 mainboard: temp=36.9 pi: temp=53.6 sysload=0.51 cputime=27.348 memavail=3391352 print_time=1321.738 buffer_time=0.000 print_stall=0 extruder: target=245 temp=236.9 pwm=0.679
Stats 1452.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=35954 bytes_read=240242 bytes_retransmit=9 bytes_invalid=0 send_seq=3545 receive_seq=3545 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006831 sd_pos=48468 heater_bed: target=75 temp=88.4 pwm=0.000 mainboard: temp=36.8 pi: temp=54.0 sysload=0.51 cputime=27.456 memavail=3391352 print_time=1322.739 buffer_time=0.000 print_stall=0 extruder: target=245 temp=238.2 pwm=0.099
Stats 1453.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=36427 bytes_read=240738 bytes_retransmit=9 bytes_invalid=0 send_seq=3581 receive_seq=3580 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006833 sd_pos=48468 heater_bed: target=75 temp=88.8 pwm=0.000 mainboard: temp=36.8 pi: temp=53.6 sysload=0.51 cputime=27.561 memavail=3391160 print_time=1323.740 buffer_time=0.000 print_stall=0 extruder: target=245 temp=238.2 pwm=1.000
Stats 1454.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=36891 bytes_read=241242 bytes_retransmit=9 bytes_invalid=0 send_seq=3618 receive_seq=3618 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006822 sd_pos=48468 heater_bed: target=75 temp=86.4 pwm=1.000 mainboard: temp=36.7 pi: temp=54.5 sysload=0.51 cputime=27.667 memavail=3391160 print_time=1324.741 buffer_time=0.000 print_stall=0 extruder: target=245 temp=237.4 pwm=1.000
Stats 1455.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=37330 bytes_read=241724 bytes_retransmit=9 bytes_invalid=0 send_seq=3656 receive_seq=3656 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006813 sd_pos=48468 heater_bed: target=75 temp=85.2 pwm=1.000 mainboard: temp=36.9 pi: temp=53.6 sysload=0.51 cputime=27.775 memavail=3390840 print_time=1325.741 buffer_time=0.000 print_stall=0 extruder: target=245 temp=237.0 pwm=1.000
Stats 1456.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=37810 bytes_read=242243 bytes_retransmit=9 bytes_invalid=0 send_seq=3694 receive_seq=3694 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006809 sd_pos=48468 heater_bed: target=75 temp=85.2 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.63 cputime=27.885 memavail=3390844 print_time=1326.742 buffer_time=0.000 print_stall=0 extruder: target=245 temp=237.3 pwm=1.000
Stats 1457.9: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000442 mcu_task_stddev=0.000000 bytes_write=38249 bytes_read=242752 bytes_retransmit=9 bytes_invalid=0 send_seq=3732 receive_seq=3732 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006812 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=36.8 pi: temp=53.1 sysload=0.63 cputime=27.991 memavail=3390872 print_time=1327.743 buffer_time=0.000 print_stall=0 extruder: target=245 temp=237.4 pwm=1.000
Stats 1458.9: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000442 mcu_task_stddev=0.000000 bytes_write=38703 bytes_read=243229 bytes_retransmit=9 bytes_invalid=0 send_seq=3769 receive_seq=3769 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006837 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=36.9 pi: temp=53.1 sysload=0.63 cputime=28.099 memavail=3390872 print_time=1328.743 buffer_time=0.000 print_stall=0 extruder: target=245 temp=237.4 pwm=1.000
Stats 1459.9: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000442 mcu_task_stddev=0.000000 bytes_write=39160 bytes_read=243753 bytes_retransmit=9 bytes_invalid=0 send_seq=3808 receive_seq=3808 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006833 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=36.9 pi: temp=53.1 sysload=0.63 cputime=28.205 memavail=3390912 print_time=1329.744 buffer_time=0.000 print_stall=0 extruder: target=245 temp=237.8 pwm=0.935
Stats 1460.9: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000442 mcu_task_stddev=0.000000 bytes_write=39644 bytes_read=244258 bytes_retransmit=9 bytes_invalid=0 send_seq=3846 receive_seq=3846 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006834 sd_pos=48468 heater_bed: target=75 temp=85.0 pwm=0.000 mainboard: temp=36.8 pi: temp=54.0 sysload=0.63 cputime=28.312 memavail=3390912 print_time=1330.744 buffer_time=0.000 print_stall=0 extruder: target=245 temp=238.1 pwm=1.000
Stats 1461.9: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000442 mcu_task_stddev=0.000000 bytes_write=40102 bytes_read=244735 bytes_retransmit=9 bytes_invalid=0 send_seq=3884 receive_seq=3884 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=37.0 pi: temp=54.0 sysload=0.58 cputime=28.421 memavail=3390928 print_time=1331.745 buffer_time=0.000 print_stall=0 extruder: target=245 temp=238.6 pwm=0.819
Stats 1462.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=40576 bytes_read=245277 bytes_retransmit=9 bytes_invalid=0 send_seq=3924 receive_seq=3924 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006824 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.58 cputime=28.537 memavail=3390720 print_time=1332.746 buffer_time=0.000 print_stall=0 extruder: target=245 temp=238.9 pwm=0.922
Stats 1463.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=41029 bytes_read=245768 bytes_retransmit=9 bytes_invalid=0 send_seq=3961 receive_seq=3961 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=84.8 pwm=0.000 mainboard: temp=36.8 pi: temp=53.6 sysload=0.58 cputime=28.646 memavail=3390724 print_time=1333.746 buffer_time=0.000 print_stall=0 extruder: target=245 temp=239.5 pwm=0.720
Stats 1464.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=41508 bytes_read=246245 bytes_retransmit=9 bytes_invalid=0 send_seq=3998 receive_seq=3998 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006835 sd_pos=48468 heater_bed: target=75 temp=84.6 pwm=0.000 mainboard: temp=36.9 pi: temp=53.6 sysload=0.58 cputime=28.754 memavail=3390728 print_time=1334.747 buffer_time=0.000 print_stall=0 extruder: target=245 temp=239.8 pwm=0.792
Stats 1465.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=41957 bytes_read=246764 bytes_retransmit=9 bytes_invalid=0 send_seq=4036 receive_seq=4036 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006832 sd_pos=48468 heater_bed: target=75 temp=84.7 pwm=0.000 mainboard: temp=36.9 pi: temp=54.5 sysload=0.58 cputime=28.861 memavail=3390240 print_time=1335.747 buffer_time=0.000 print_stall=0 extruder: target=245 temp=240.2 pwm=0.691
Stats 1466.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=42423 bytes_read=247265 bytes_retransmit=9 bytes_invalid=0 send_seq=4075 receive_seq=4075 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006830 sd_pos=48468 heater_bed: target=75 temp=84.6 pwm=0.000 mainboard: temp=37.0 pi: temp=53.6 sysload=0.53 cputime=28.971 memavail=3390276 print_time=1336.748 buffer_time=0.000 print_stall=0 extruder: target=245 temp=240.6 pwm=0.750
Heater extruder within range of 245.000
Stats 1467.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=42899 bytes_read=247783 bytes_retransmit=9 bytes_invalid=0 send_seq=4116 receive_seq=4116 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006834 sd_pos=48468 heater_bed: target=75 temp=84.6 pwm=0.000 mainboard: temp=36.9 pi: temp=53.6 sysload=0.53 cputime=29.083 memavail=3390292 print_time=1337.750 buffer_time=0.000 print_stall=0 extruder: target=245 temp=241.0 pwm=0.683
Stats 1468.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=43366 bytes_read=248289 bytes_retransmit=9 bytes_invalid=0 send_seq=4153 receive_seq=4153 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006832 sd_pos=48468 heater_bed: target=75 temp=84.5 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.53 cputime=29.193 memavail=3390308 print_time=1338.750 buffer_time=0.000 print_stall=0 extruder: target=245 temp=241.3 pwm=0.712
Stats 1469.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=43833 bytes_read=248780 bytes_retransmit=9 bytes_invalid=0 send_seq=4190 receive_seq=4190 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006832 sd_pos=48468 heater_bed: target=75 temp=84.5 pwm=0.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.53 cputime=29.302 memavail=3390428 print_time=1339.751 buffer_time=0.000 print_stall=0 extruder: target=245 temp=241.6 pwm=0.589
Stats 1470.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=44320 bytes_read=249285 bytes_retransmit=9 bytes_invalid=0 send_seq=4231 receive_seq=4231 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006896 sd_pos=48468 heater_bed: target=75 temp=84.7 pwm=0.000 mainboard: temp=36.8 pi: temp=53.6 sysload=0.53 cputime=29.408 memavail=3389976 print_time=1340.751 buffer_time=0.000 print_stall=0 extruder: target=245 temp=242.0 pwm=0.544
Stats 1471.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=44776 bytes_read=249799 bytes_retransmit=9 bytes_invalid=0 send_seq=4268 receive_seq=4268 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=400006894 sd_pos=48468 heater_bed: target=75 temp=84.7 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.49 cputime=29.523 memavail=3389984 print_time=1341.751 buffer_time=0.000 print_stall=0 extruder: target=245 temp=242.3 pwm=0.722
Stats 1472.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=45251 bytes_read=250288 bytes_retransmit=9 bytes_invalid=0 send_seq=4305 receive_seq=4305 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006877 sd_pos=48468 heater_bed: target=75 temp=84.7 pwm=0.000 mainboard: temp=37.0 pi: temp=54.0 sysload=0.49 cputime=29.630 memavail=3389984 print_time=1342.752 buffer_time=0.000 print_stall=0 extruder: target=245 temp=242.6 pwm=0.671
Stats 1473.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=45731 bytes_read=250798 bytes_retransmit=9 bytes_invalid=0 send_seq=4344 receive_seq=4344 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006866 sd_pos=48468 heater_bed: target=75 temp=84.7 pwm=0.000 mainboard: temp=36.9 pi: temp=54.5 sysload=0.49 cputime=29.738 memavail=3389772 print_time=1343.752 buffer_time=0.000 print_stall=0 extruder: target=245 temp=242.7 pwm=0.671
Stats 1474.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=46184 bytes_read=251303 bytes_retransmit=9 bytes_invalid=0 send_seq=4381 receive_seq=4381 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006857 sd_pos=48468 heater_bed: target=75 temp=84.8 pwm=0.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.49 cputime=29.843 memavail=3389772 print_time=1344.753 buffer_time=0.000 print_stall=0 extruder: target=245 temp=242.9 pwm=0.582
Stats 1475.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=46667 bytes_read=251795 bytes_retransmit=9 bytes_invalid=0 send_seq=4421 receive_seq=4421 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006857 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.49 cputime=29.957 memavail=3389092 print_time=1345.753 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.0 pwm=0.816
Stats 1476.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=47126 bytes_read=252310 bytes_retransmit=9 bytes_invalid=0 send_seq=4461 receive_seq=4461 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006857 sd_pos=48468 heater_bed: target=75 temp=85.2 pwm=0.000 mainboard: temp=37.0 pi: temp=52.6 sysload=0.53 cputime=30.077 memavail=3389092 print_time=1346.753 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.2 pwm=0.648
Stats 1477.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=47587 bytes_read=252833 bytes_retransmit=9 bytes_invalid=0 send_seq=4499 receive_seq=4499 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006860 sd_pos=48468 heater_bed: target=75 temp=85.2 pwm=0.000 mainboard: temp=36.9 pi: temp=53.6 sysload=0.53 cputime=30.191 memavail=3389032 print_time=1347.754 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.3 pwm=0.811
Stats 1478.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=48079 bytes_read=253315 bytes_retransmit=9 bytes_invalid=0 send_seq=4537 receive_seq=4537 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006867 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.53 cputime=30.303 memavail=3388836 print_time=1348.754 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.5 pwm=0.737
Stats 1479.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=48552 bytes_read=253830 bytes_retransmit=9 bytes_invalid=0 send_seq=4577 receive_seq=4577 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006856 sd_pos=48468 heater_bed: target=75 temp=85.0 pwm=0.000 mainboard: temp=37.1 pi: temp=53.1 sysload=0.53 cputime=30.418 memavail=3389096 print_time=1349.755 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.4 pwm=0.832
Stats 1480.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=49019 bytes_read=254335 bytes_retransmit=9 bytes_invalid=0 send_seq=4614 receive_seq=4614 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006848 sd_pos=48468 heater_bed: target=75 temp=85.0 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.53 cputime=30.531 memavail=3389132 print_time=1350.756 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.7 pwm=0.616
Stats 1481.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=49506 bytes_read=254840 bytes_retransmit=9 bytes_invalid=0 send_seq=4655 receive_seq=4655 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006841 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=36.9 pi: temp=53.6 sysload=0.49 cputime=30.636 memavail=3389136 print_time=1351.756 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.7 pwm=0.769
Stats 1482.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=49962 bytes_read=255338 bytes_retransmit=9 bytes_invalid=0 send_seq=4692 receive_seq=4692 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006840 sd_pos=48468 heater_bed: target=75 temp=85.0 pwm=0.000 mainboard: temp=37.0 pi: temp=53.6 sysload=0.49 cputime=30.746 memavail=3391088 print_time=1352.757 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.9 pwm=0.688
Stats 1483.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=50420 bytes_read=255848 bytes_retransmit=9 bytes_invalid=0 send_seq=4730 receive_seq=4730 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=36.8 pi: temp=55.0 sysload=0.49 cputime=30.824 memavail=3391700 print_time=1353.758 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.9 pwm=0.739
Stats 1484.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=50897 bytes_read=256335 bytes_retransmit=9 bytes_invalid=0 send_seq=4769 receive_seq=4769 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006818 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.49 cputime=30.887 memavail=3391572 print_time=1354.758 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.0 pwm=0.793
Stats 1485.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=51369 bytes_read=256832 bytes_retransmit=9 bytes_invalid=0 send_seq=4807 receive_seq=4807 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006809 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=37.0 pi: temp=55.0 sysload=0.49 cputime=30.950 memavail=3391616 print_time=1355.759 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.2 pwm=0.708
Stats 1486.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=51862 bytes_read=257360 bytes_retransmit=9 bytes_invalid=0 send_seq=4847 receive_seq=4847 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006803 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.53 cputime=31.013 memavail=3391300 print_time=1356.759 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.5 pwm=0.553
Stats 1487.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=52328 bytes_read=257860 bytes_retransmit=9 bytes_invalid=0 send_seq=4886 receive_seq=4886 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006791 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.53 cputime=31.087 memavail=3391216 print_time=1357.760 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.4 pwm=0.755
Stats 1488.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=52770 bytes_read=258352 bytes_retransmit=9 bytes_invalid=0 send_seq=4923 receive_seq=4923 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006792 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.53 cputime=31.195 memavail=3391248 print_time=1358.761 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.7 pwm=0.530
Stats 1489.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=53250 bytes_read=258862 bytes_retransmit=9 bytes_invalid=0 send_seq=4962 receive_seq=4961 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006795 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=36.9 pi: temp=54.0 sysload=0.53 cputime=31.303 memavail=3391016 print_time=1359.762 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=0.547
Stats 1490.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=53713 bytes_read=259362 bytes_retransmit=9 bytes_invalid=0 send_seq=5001 receive_seq=5001 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006794 sd_pos=48468 heater_bed: target=75 temp=85.0 pwm=0.000 mainboard: temp=36.9 pi: temp=55.0 sysload=0.53 cputime=31.412 memavail=3394672 print_time=1360.762 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=0.568
Stats 1491.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=54153 bytes_read=259849 bytes_retransmit=9 bytes_invalid=0 send_seq=5037 receive_seq=5037 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006799 sd_pos=48468 heater_bed: target=75 temp=85.0 pwm=0.000 mainboard: temp=37.0 pi: temp=54.0 sysload=0.48 cputime=31.520 memavail=3393708 print_time=1361.763 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=0.656
Stats 1492.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=54619 bytes_read=260385 bytes_retransmit=9 bytes_invalid=0 send_seq=5076 receive_seq=5076 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006805 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.48 cputime=31.635 memavail=3393456 print_time=1362.765 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.538
Stats 1493.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=55081 bytes_read=260850 bytes_retransmit=9 bytes_invalid=0 send_seq=5112 receive_seq=5112 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006803 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.2 pi: temp=53.6 sysload=0.48 cputime=31.744 memavail=3393608 print_time=1363.765 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.490
Stats 1494.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=55526 bytes_read=261342 bytes_retransmit=9 bytes_invalid=0 send_seq=5149 receive_seq=5149 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006794 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.0 pi: temp=54.0 sysload=0.48 cputime=31.856 memavail=3393396 print_time=1364.766 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.836
Stats 1495.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=56024 bytes_read=261875 bytes_retransmit=9 bytes_invalid=0 send_seq=5190 receive_seq=5190 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006794 sd_pos=48468 heater_bed: target=75 temp=85.2 pwm=0.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.48 cputime=31.972 memavail=3392940 print_time=1365.766 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.490
Stats 1496.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=56486 bytes_read=262347 bytes_retransmit=9 bytes_invalid=0 send_seq=5226 receive_seq=5226 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006792 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.1 pi: temp=54.0 sysload=0.45 cputime=32.084 memavail=3392944 print_time=1366.767 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.646
Stats 1497.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=56958 bytes_read=262852 bytes_retransmit=9 bytes_invalid=0 send_seq=5264 receive_seq=5263 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006800 sd_pos=48468 heater_bed: target=75 temp=85.2 pwm=0.000 mainboard: temp=37.1 pi: temp=53.1 sysload=0.45 cputime=32.199 memavail=3392728 print_time=1367.768 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.662
Stats 1498.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=57430 bytes_read=263375 bytes_retransmit=9 bytes_invalid=0 send_seq=5302 receive_seq=5302 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006804 sd_pos=48468 heater_bed: target=75 temp=85.5 pwm=0.000 mainboard: temp=37.1 pi: temp=53.6 sysload=0.45 cputime=32.314 memavail=3392284 print_time=1368.768 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.5 pwm=0.385
Stats 1499.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=57899 bytes_read=263857 bytes_retransmit=9 bytes_invalid=0 send_seq=5340 receive_seq=5340 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006807 sd_pos=48468 heater_bed: target=75 temp=85.8 pwm=0.000 mainboard: temp=37.2 pi: temp=53.6 sysload=0.45 cputime=32.422 memavail=3391624 print_time=1369.769 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.6 pwm=0.401
Stats 1500.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=58367 bytes_read=264364 bytes_retransmit=9 bytes_invalid=0 send_seq=5381 receive_seq=5380 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006811 sd_pos=48468 heater_bed: target=75 temp=86.3 pwm=0.000 mainboard: temp=37.1 pi: temp=54.0 sysload=0.45 cputime=32.536 memavail=3391412 print_time=1370.770 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.8 pwm=0.401
Stats 1501.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=58858 bytes_read=264887 bytes_retransmit=9 bytes_invalid=0 send_seq=5419 receive_seq=5419 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006808 sd_pos=48468 heater_bed: target=75 temp=85.7 pwm=1.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.41 cputime=32.649 memavail=3390920 print_time=1371.771 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.6 pwm=0.895
Stats 1502.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=59349 bytes_read=265382 bytes_retransmit=9 bytes_invalid=0 send_seq=5457 receive_seq=5457 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006804 sd_pos=48468 heater_bed: target=75 temp=85.6 pwm=1.000 mainboard: temp=37.1 pi: temp=55.0 sysload=0.41 cputime=32.758 memavail=3394976 print_time=1372.772 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=1.000
Stats 1503.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=59847 bytes_read=265895 bytes_retransmit=9 bytes_invalid=0 send_seq=5497 receive_seq=5497 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006801 sd_pos=48468 heater_bed: target=75 temp=85.7 pwm=0.852 mainboard: temp=37.2 pi: temp=53.6 sysload=0.41 cputime=32.871 memavail=3394256 print_time=1373.773 buffer_time=0.000 print_stall=0 extruder: target=245 temp=249.7 pwm=0.000
Stats 1504.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=60332 bytes_read=266404 bytes_retransmit=9 bytes_invalid=0 send_seq=5536 receive_seq=5536 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006805 sd_pos=48468 heater_bed: target=75 temp=85.3 pwm=0.000 mainboard: temp=37.0 pi: temp=54.0 sysload=0.41 cputime=32.989 memavail=3394032 print_time=1374.774 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=1.000
Stats 1505.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=60793 bytes_read=266886 bytes_retransmit=9 bytes_invalid=0 send_seq=5574 receive_seq=5574 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006813 sd_pos=48468 heater_bed: target=75 temp=86.3 pwm=0.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.41 cputime=33.106 memavail=3393152 print_time=1375.774 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.5 pwm=0.470
Stats 1506.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=61283 bytes_read=267401 bytes_retransmit=9 bytes_invalid=0 send_seq=5614 receive_seq=5614 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006819 sd_pos=48468 heater_bed: target=75 temp=86.9 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.38 cputime=33.222 memavail=3393532 print_time=1376.775 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.781
Stats 1507.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=61747 bytes_read=267919 bytes_retransmit=9 bytes_invalid=0 send_seq=5651 receive_seq=5651 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006824 sd_pos=48468 heater_bed: target=75 temp=86.5 pwm=1.000 mainboard: temp=37.0 pi: temp=54.0 sysload=0.38 cputime=33.334 memavail=3393532 print_time=1377.775 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=1.000
Stats 1508.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=62231 bytes_read=268396 bytes_retransmit=9 bytes_invalid=0 send_seq=5688 receive_seq=5688 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=86.6 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=0.38 cputime=33.447 memavail=3393652 print_time=1378.776 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.764
Stats 1509.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=62726 bytes_read=268911 bytes_retransmit=9 bytes_invalid=0 send_seq=5728 receive_seq=5728 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006842 sd_pos=48468 heater_bed: target=75 temp=84.0 pwm=1.000 mainboard: temp=37.2 pi: temp=53.6 sysload=0.38 cputime=33.560 memavail=3393672 print_time=1379.776 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.9 pwm=1.000
Stats 1510.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=63173 bytes_read=269421 bytes_retransmit=9 bytes_invalid=0 send_seq=5766 receive_seq=5766 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006859 sd_pos=48468 heater_bed: target=75 temp=84.0 pwm=0.566 mainboard: temp=37.0 pi: temp=54.5 sysload=0.38 cputime=33.672 memavail=3393216 print_time=1380.777 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.5 pwm=1.000
Stats 1511.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000422 mcu_task_stddev=0.000000 bytes_write=63632 bytes_read=269898 bytes_retransmit=9 bytes_invalid=0 send_seq=5803 receive_seq=5803 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400006859 sd_pos=48468 heater_bed: target=75 temp=83.9 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.35 cputime=33.781 memavail=3393116 print_time=1381.778 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.5 pwm=1.000
Stats 1512.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=64076 bytes_read=270416 bytes_retransmit=9 bytes_invalid=0 send_seq=5841 receive_seq=5841 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006859 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.1 pi: temp=54.0 sysload=0.35 cputime=33.893 memavail=3393376 print_time=1382.778 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.3 pwm=1.000
Stats 1513.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=64510 bytes_read=270921 bytes_retransmit=9 bytes_invalid=0 send_seq=5878 receive_seq=5878 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006847 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.2 pi: temp=54.0 sysload=0.35 cputime=34.002 memavail=3397124 print_time=1383.779 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.3 pwm=0.888
Stats 1514.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=65009 bytes_read=271410 bytes_retransmit=9 bytes_invalid=0 send_seq=5917 receive_seq=5917 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006837 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.2 pi: temp=54.0 sysload=0.35 cputime=34.120 memavail=3396472 print_time=1384.780 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.5 pwm=0.760
Stats 1515.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=65453 bytes_read=271909 bytes_retransmit=9 bytes_invalid=0 send_seq=5956 receive_seq=5956 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.2 pi: temp=54.0 sysload=0.35 cputime=34.230 memavail=3395804 print_time=1385.779 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.6 pwm=0.760
Stats 1516.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=65955 bytes_read=272429 bytes_retransmit=9 bytes_invalid=0 send_seq=5996 receive_seq=5996 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006820 sd_pos=48468 heater_bed: target=75 temp=83.4 pwm=0.000 mainboard: temp=37.2 pi: temp=53.6 sysload=0.40 cputime=34.347 memavail=3395580 print_time=1386.780 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.2 pwm=0.457
Stats 1517.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=66417 bytes_read=272942 bytes_retransmit=9 bytes_invalid=0 send_seq=6036 receive_seq=6036 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006814 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.0 pi: temp=54.0 sysload=0.40 cputime=34.458 memavail=3395132 print_time=1387.780 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.4 pwm=0.521
Stats 1518.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=66867 bytes_read=273439 bytes_retransmit=9 bytes_invalid=0 send_seq=6074 receive_seq=6074 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006813 sd_pos=48468 heater_bed: target=75 temp=83.4 pwm=0.000 mainboard: temp=37.3 pi: temp=55.0 sysload=0.40 cputime=34.565 memavail=3394684 print_time=1388.780 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.7 pwm=0.419
Stats 1519.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=67360 bytes_read=273954 bytes_retransmit=9 bytes_invalid=0 send_seq=6114 receive_seq=6113 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006825 sd_pos=48468 heater_bed: target=75 temp=83.4 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=0.40 cputime=34.679 memavail=3394548 print_time=1389.781 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.8 pwm=0.548
Stats 1520.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=67838 bytes_read=274465 bytes_retransmit=9 bytes_invalid=0 send_seq=6153 receive_seq=6153 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006829 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.1 pi: temp=54.0 sysload=0.40 cputime=34.794 memavail=3394096 print_time=1390.782 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.488
Stats 1521.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=68296 bytes_read=274962 bytes_retransmit=9 bytes_invalid=0 send_seq=6191 receive_seq=6191 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006831 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.2 pi: temp=53.6 sysload=0.53 cputime=34.901 memavail=3394216 print_time=1391.782 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.7 pwm=1.000
Stats 1522.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=68797 bytes_read=275508 bytes_retransmit=9 bytes_invalid=0 send_seq=6232 receive_seq=6232 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.0 pi: temp=54.5 sysload=0.53 cputime=35.013 memavail=3394040 print_time=1392.783 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.632
Stats 1523.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=69271 bytes_read=275995 bytes_retransmit=9 bytes_invalid=0 send_seq=6271 receive_seq=6271 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006831 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=0.53 cputime=35.121 memavail=3393832 print_time=1393.784 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.609
Stats 1524.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=69726 bytes_read=276497 bytes_retransmit=9 bytes_invalid=0 send_seq=6310 receive_seq=6310 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006832 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.1 pi: temp=53.6 sysload=0.53 cputime=35.234 memavail=3393104 print_time=1394.785 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.740
Stats 1525.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=70230 bytes_read=277017 bytes_retransmit=9 bytes_invalid=0 send_seq=6350 receive_seq=6350 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.1 pi: temp=53.1 sysload=0.53 cputime=35.350 memavail=3393276 print_time=1395.786 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.743
Stats 1526.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=70660 bytes_read=277479 bytes_retransmit=9 bytes_invalid=0 send_seq=6384 receive_seq=6384 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006824 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.2 pi: temp=54.0 sysload=0.65 cputime=35.458 memavail=3393052 print_time=1396.786 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.628
Stats 1527.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=71094 bytes_read=277984 bytes_retransmit=9 bytes_invalid=0 send_seq=6421 receive_seq=6421 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006824 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=0.65 cputime=35.575 memavail=3392828 print_time=1397.786 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.628
Stats 1528.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=71576 bytes_read=278512 bytes_retransmit=9 bytes_invalid=0 send_seq=6461 receive_seq=6461 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006827 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.65 cputime=35.688 memavail=3392628 print_time=1398.787 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.704
Stats 1529.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=72053 bytes_read=278999 bytes_retransmit=9 bytes_invalid=0 send_seq=6500 receive_seq=6500 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006825 sd_pos=48468 heater_bed: target=75 temp=83.7 pwm=0.000 mainboard: temp=37.1 pi: temp=53.6 sysload=0.65 cputime=35.801 memavail=3392428 print_time=1399.788 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.581
Stats 1530.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=72511 bytes_read=279496 bytes_retransmit=9 bytes_invalid=0 send_seq=6538 receive_seq=6538 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006839 sd_pos=48468 heater_bed: target=75 temp=83.7 pwm=0.000 mainboard: temp=37.2 pi: temp=54.0 sysload=0.65 cputime=35.911 memavail=3392216 print_time=1400.789 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.6 pwm=1.000
Stats 1531.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=73007 bytes_read=280024 bytes_retransmit=9 bytes_invalid=0 send_seq=6578 receive_seq=6578 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006850 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.67 cputime=36.022 memavail=3392224 print_time=1401.789 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.628
Stats 1532.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=73460 bytes_read=280514 bytes_retransmit=9 bytes_invalid=0 send_seq=6615 receive_seq=6615 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006855 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.2 pi: temp=54.0 sysload=0.67 cputime=36.131 memavail=3392496 print_time=1402.790 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.660
Stats 1533.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=73926 bytes_read=281016 bytes_retransmit=9 bytes_invalid=0 send_seq=6654 receive_seq=6654 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006861 sd_pos=48468 heater_bed: target=75 temp=83.5 pwm=0.000 mainboard: temp=37.3 pi: temp=54.0 sysload=0.67 cputime=36.244 memavail=3392532 print_time=1403.791 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.490
Stats 1534.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=74398 bytes_read=281526 bytes_retransmit=9 bytes_invalid=0 send_seq=6692 receive_seq=6692 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006844 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.2 pi: temp=54.0 sysload=0.67 cputime=36.367 memavail=3392792 print_time=1404.791 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.514
Stats 1535.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=74840 bytes_read=282003 bytes_retransmit=9 bytes_invalid=0 send_seq=6729 receive_seq=6729 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006838 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.67 cputime=36.430 memavail=3396340 print_time=1405.791 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.665
Stats 1536.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=75301 bytes_read=282493 bytes_retransmit=9 bytes_invalid=0 send_seq=6767 receive_seq=6767 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006829 sd_pos=48468 heater_bed: target=75 temp=83.6 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.70 cputime=36.493 memavail=3396148 print_time=1406.792 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.8 pwm=1.000
Stats 1537.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=75772 bytes_read=283034 bytes_retransmit=9 bytes_invalid=0 send_seq=6807 receive_seq=6807 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=84.0 pwm=0.000 mainboard: temp=37.1 pi: temp=55.5 sysload=0.70 cputime=36.557 memavail=3395924 print_time=1407.792 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.6 pwm=0.363
Stats 1538.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=76233 bytes_read=283516 bytes_retransmit=9 bytes_invalid=0 send_seq=6845 receive_seq=6845 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006818 sd_pos=48468 heater_bed: target=75 temp=83.8 pwm=0.000 mainboard: temp=37.1 pi: temp=54.5 sysload=0.70 cputime=36.623 memavail=3395456 print_time=1408.792 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.634
Stats 1539.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=76710 bytes_read=284032 bytes_retransmit=9 bytes_invalid=0 send_seq=6884 receive_seq=6884 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816 sd_pos=48468 heater_bed: target=75 temp=83.8 pwm=0.000 mainboard: temp=37.2 pi: temp=55.0 sysload=0.70 cputime=36.718 memavail=3395236 print_time=1409.792 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.7 pwm=0.473
Stats 1540.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=77208 bytes_read=284551 bytes_retransmit=9 bytes_invalid=0 send_seq=6925 receive_seq=6925 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006818 sd_pos=48468 heater_bed: target=75 temp=83.7 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=0.70 cputime=36.830 memavail=3394592 print_time=1410.793 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.5 pwm=0.654
Stats 1541.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=77658 bytes_read=285033 bytes_retransmit=9 bytes_invalid=0 send_seq=6963 receive_seq=6963 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816 sd_pos=48468 heater_bed: target=75 temp=83.9 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=0.81 cputime=36.941 memavail=3394596 print_time=1411.794 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.724
Stats 1542.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=78117 bytes_read=285547 bytes_retransmit=9 bytes_invalid=0 send_seq=6999 receive_seq=6999 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006841 sd_pos=48468 heater_bed: target=75 temp=83.9 pwm=0.000 mainboard: temp=37.3 pi: temp=54.0 sysload=0.81 cputime=37.053 memavail=3394628 print_time=1412.795 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.518
Stats 1543.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=78596 bytes_read=286038 bytes_retransmit=9 bytes_invalid=0 send_seq=7036 receive_seq=7036 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006832 sd_pos=48468 heater_bed: target=75 temp=83.9 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=0.81 cputime=37.137 memavail=3394188 print_time=1413.796 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.516
Stats 1544.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=79066 bytes_read=286538 bytes_retransmit=9 bytes_invalid=0 send_seq=7076 receive_seq=7076 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006822 sd_pos=48468 heater_bed: target=75 temp=83.8 pwm=0.000 mainboard: temp=37.3 pi: temp=55.0 sysload=0.81 cputime=37.199 memavail=3393948 print_time=1414.796 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.618
Stats 1545.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=79522 bytes_read=287044 bytes_retransmit=9 bytes_invalid=0 send_seq=7113 receive_seq=7113 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006819 sd_pos=48468 heater_bed: target=75 temp=83.8 pwm=0.000 mainboard: temp=37.2 pi: temp=55.0 sysload=0.81 cputime=37.263 memavail=3393060 print_time=1415.796 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.819
Stats 1546.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=79988 bytes_read=287542 bytes_retransmit=9 bytes_invalid=0 send_seq=7152 receive_seq=7152 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006811 sd_pos=48468 heater_bed: target=75 temp=83.8 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=0.82 cputime=37.323 memavail=3392588 print_time=1416.797 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.781
Stats 1547.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=80441 bytes_read=288028 bytes_retransmit=9 bytes_invalid=0 send_seq=7189 receive_seq=7189 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006807 sd_pos=48468 heater_bed: target=75 temp=83.8 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=0.82 cputime=37.388 memavail=3392380 print_time=1417.797 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.772
Stats 1548.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=80913 bytes_read=288539 bytes_retransmit=9 bytes_invalid=0 send_seq=7227 receive_seq=7227 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006802 sd_pos=48468 heater_bed: target=75 temp=83.8 pwm=0.000 mainboard: temp=37.3 pi: temp=55.0 sysload=0.82 cputime=37.478 memavail=3392380 print_time=1418.798 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.474
Stats 1549.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=81401 bytes_read=289048 bytes_retransmit=9 bytes_invalid=0 send_seq=7266 receive_seq=7266 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006795 sd_pos=48468 heater_bed: target=75 temp=83.9 pwm=0.000 mainboard: temp=37.2 pi: temp=55.0 sysload=0.82 cputime=37.590 memavail=3392180 print_time=1419.801 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.7 pwm=1.000
Stats 1550.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=81857 bytes_read=289525 bytes_retransmit=9 bytes_invalid=0 send_seq=7303 receive_seq=7303 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006795 sd_pos=48468 heater_bed: target=75 temp=84.2 pwm=0.000 mainboard: temp=37.3 pi: temp=55.5 sysload=0.82 cputime=37.704 memavail=3391724 print_time=1420.800 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.5 pwm=0.350
Stats 1551.9: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=82338 bytes_read=290036 bytes_retransmit=9 bytes_invalid=0 send_seq=7341 receive_seq=7341 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006786 sd_pos=48468 heater_bed: target=75 temp=84.3 pwm=0.000 mainboard: temp=37.2 pi: temp=55.5 sysload=1.00 cputime=37.816 memavail=3391784 print_time=1421.802 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.6 pwm=0.382
Stats 1552.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000432 mcu_task_stddev=0.000000 bytes_write=82806 bytes_read=290558 bytes_retransmit=9 bytes_invalid=0 send_seq=7380 receive_seq=7380 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006783 sd_pos=48468 heater_bed: target=75 temp=84.3 pwm=0.000 mainboard: temp=37.2 pi: temp=55.0 sysload=1.00 cputime=37.926 memavail=3395968 print_time=1422.803 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.7 pwm=0.388
Stats 1553.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000432 mcu_task_stddev=0.000000 bytes_write=83278 bytes_read=291040 bytes_retransmit=9 bytes_invalid=0 send_seq=7418 receive_seq=7418 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006782 sd_pos=48468 heater_bed: target=75 temp=84.2 pwm=0.000 mainboard: temp=37.2 pi: temp=55.0 sysload=1.00 cputime=38.039 memavail=3395532 print_time=1423.804 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.6 pwm=0.645
Stats 1554.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000432 mcu_task_stddev=0.000000 bytes_write=83766 bytes_read=291551 bytes_retransmit=9 bytes_invalid=0 send_seq=7457 receive_seq=7456 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006784 sd_pos=48468 heater_bed: target=75 temp=84.4 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.00 cputime=38.148 memavail=3395308 print_time=1424.804 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.6 pwm=0.601
Stats 1555.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000432 mcu_task_stddev=0.000000 bytes_write=84227 bytes_read=292060 bytes_retransmit=9 bytes_invalid=0 send_seq=7495 receive_seq=7495 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006785 sd_pos=48468 heater_bed: target=75 temp=84.5 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.00 cputime=38.263 memavail=3394640 print_time=1425.804 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.6 pwm=0.631
Stats 1556.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000432 mcu_task_stddev=0.000000 bytes_write=84674 bytes_read=292542 bytes_retransmit=9 bytes_invalid=0 send_seq=7533 receive_seq=7533 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006785 sd_pos=48468 heater_bed: target=75 temp=84.7 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.24 cputime=38.371 memavail=3394416 print_time=1426.805 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.7 pwm=0.431
Stats 1557.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=85170 bytes_read=293077 bytes_retransmit=9 bytes_invalid=0 send_seq=7573 receive_seq=7573 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006815 sd_pos=48468 heater_bed: target=75 temp=88.9 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.24 cputime=38.486 memavail=3394324 print_time=1427.805 buffer_time=0.000 print_stall=0 extruder: target=245 temp=246.0 pwm=0.274
Stats 1558.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=85636 bytes_read=293572 bytes_retransmit=9 bytes_invalid=0 send_seq=7611 receive_seq=7611 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816 sd_pos=48468 heater_bed: target=75 temp=87.7 pwm=0.000 mainboard: temp=37.3 pi: temp=54.0 sysload=1.24 cputime=38.595 memavail=3394080 print_time=1428.806 buffer_time=0.000 print_stall=0 extruder: target=245 temp=247.0 pwm=0.454
Stats 1559.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=86107 bytes_read=294044 bytes_retransmit=9 bytes_invalid=0 send_seq=7647 receive_seq=7647 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006822 sd_pos=48468 heater_bed: target=75 temp=88.3 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.24 cputime=38.708 memavail=3394084 print_time=1429.807 buffer_time=0.000 print_stall=0 extruder: target=245 temp=247.4 pwm=0.133
Stats 1560.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=86570 bytes_read=294558 bytes_retransmit=9 bytes_invalid=0 send_seq=7684 receive_seq=7684 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006837 sd_pos=48468 heater_bed: target=75 temp=84.8 pwm=1.000 mainboard: temp=37.2 pi: temp=54.5 sysload=1.24 cputime=38.823 memavail=3393832 print_time=1430.808 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=1.000
Stats 1561.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=87033 bytes_read=295059 bytes_retransmit=9 bytes_invalid=0 send_seq=7723 receive_seq=7723 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006847 sd_pos=48468 heater_bed: target=75 temp=85.3 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.38 cputime=38.935 memavail=3393368 print_time=1431.809 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=1.000
Stats 1562.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=87516 bytes_read=295562 bytes_retransmit=9 bytes_invalid=0 send_seq=7761 receive_seq=7761 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006856 sd_pos=48468 heater_bed: target=75 temp=85.9 pwm=0.000 mainboard: temp=37.2 pi: temp=53.6 sysload=1.38 cputime=39.048 memavail=3393368 print_time=1432.810 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.7 pwm=0.136
Stats 1563.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=87978 bytes_read=296063 bytes_retransmit=9 bytes_invalid=0 send_seq=7797 receive_seq=7797 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006848 sd_pos=48468 heater_bed: target=75 temp=85.6 pwm=1.000 mainboard: temp=37.3 pi: temp=54.0 sysload=1.38 cputime=39.132 memavail=3393376 print_time=1433.812 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=1.000
Stats 1564.9: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=88412 bytes_read=296554 bytes_retransmit=9 bytes_invalid=0 send_seq=7834 receive_seq=7834 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006843 sd_pos=48468 heater_bed: target=75 temp=84.2 pwm=1.000 mainboard: temp=37.4 pi: temp=54.0 sysload=1.38 cputime=39.195 memavail=3393400 print_time=1434.812 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.8 pwm=1.000
Stats 1566.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=88858 bytes_read=297036 bytes_retransmit=9 bytes_invalid=0 send_seq=7872 receive_seq=7872 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006833 sd_pos=48468 heater_bed: target=75 temp=84.0 pwm=0.021 mainboard: temp=37.3 pi: temp=55.0 sysload=1.38 cputime=39.258 memavail=3392960 print_time=1435.813 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.5 pwm=1.000
Stats 1567.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=89319 bytes_read=297552 bytes_retransmit=9 bytes_invalid=0 send_seq=7911 receive_seq=7911 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=84.1 pwm=0.021 mainboard: temp=37.5 pi: temp=54.0 sysload=1.51 cputime=39.324 memavail=3392756 print_time=1436.813 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.7 pwm=0.739
Stats 1568.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=89806 bytes_read=298079 bytes_retransmit=9 bytes_invalid=0 send_seq=7951 receive_seq=7951 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816 sd_pos=48468 heater_bed: target=75 temp=84.3 pwm=0.021 mainboard: temp=37.2 pi: temp=55.5 sysload=1.51 cputime=39.387 memavail=3392792 print_time=1437.814 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.7 pwm=0.671
Stats 1569.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=90256 bytes_read=298553 bytes_retransmit=9 bytes_invalid=0 send_seq=7989 receive_seq=7989 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006811 sd_pos=48468 heater_bed: target=75 temp=84.3 pwm=0.021 mainboard: temp=37.3 pi: temp=54.5 sysload=1.51 cputime=39.478 memavail=3392812 print_time=1438.814 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.7 pwm=0.874
Stats 1570.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=90720 bytes_read=299059 bytes_retransmit=9 bytes_invalid=0 send_seq=8026 receive_seq=8026 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006809 sd_pos=48468 heater_bed: target=75 temp=84.0 pwm=0.000 mainboard: temp=37.2 pi: temp=55.5 sysload=1.51 cputime=39.588 memavail=3392588 print_time=1439.814 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.9 pwm=0.599
Stats 1571.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=91213 bytes_read=299573 bytes_retransmit=9 bytes_invalid=0 send_seq=8066 receive_seq=8066 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006807 sd_pos=48468 heater_bed: target=75 temp=84.4 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=1.51 cputime=39.704 memavail=3392612 print_time=1440.815 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.2 pwm=0.441
Stats 1572.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000430 mcu_task_stddev=0.000000 bytes_write=91685 bytes_read=300055 bytes_retransmit=9 bytes_invalid=0 send_seq=8104 receive_seq=8104 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006808 sd_pos=48468 heater_bed: target=75 temp=84.3 pwm=0.000 mainboard: temp=37.2 pi: temp=55.5 sysload=1.47 cputime=39.814 memavail=3396424 print_time=1441.815 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.3 pwm=0.657
Stats 1573.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=92138 bytes_read=300574 bytes_retransmit=9 bytes_invalid=0 send_seq=8141 receive_seq=8141 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006811 sd_pos=48468 heater_bed: target=75 temp=84.6 pwm=0.000 mainboard: temp=37.3 pi: temp=55.0 sysload=1.47 cputime=39.924 memavail=3396228 print_time=1442.817 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.7 pwm=0.445
Stats 1574.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=92650 bytes_read=301093 bytes_retransmit=9 bytes_invalid=0 send_seq=8182 receive_seq=8182 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006812 sd_pos=48468 heater_bed: target=75 temp=85.2 pwm=0.000 mainboard: temp=37.4 pi: temp=56.0 sysload=1.47 cputime=40.041 memavail=3396236 print_time=1443.817 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.168
Stats 1575.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=93118 bytes_read=301575 bytes_retransmit=9 bytes_invalid=0 send_seq=8220 receive_seq=8220 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816 sd_pos=48468 heater_bed: target=75 temp=85.4 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.47 cputime=40.152 memavail=3396012 print_time=1444.817 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.5 pwm=0.318
Stats 1576.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=93590 bytes_read=302086 bytes_retransmit=9 bytes_invalid=0 send_seq=8258 receive_seq=8258 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=85.7 pwm=0.000 mainboard: temp=37.4 pi: temp=54.0 sysload=1.47 cputime=40.269 memavail=3395352 print_time=1445.818 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.7 pwm=0.303
Stats 1577.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=94067 bytes_read=302595 bytes_retransmit=9 bytes_invalid=0 send_seq=8297 receive_seq=8297 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006827 sd_pos=48468 heater_bed: target=75 temp=85.8 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.59 cputime=40.382 memavail=3395364 print_time=1446.819 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.8 pwm=0.463
Stats 1578.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=94534 bytes_read=303085 bytes_retransmit=9 bytes_invalid=0 send_seq=8334 receive_seq=8334 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006827 sd_pos=48468 heater_bed: target=75 temp=85.7 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.59 cputime=40.494 memavail=3394904 print_time=1447.820 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.8 pwm=0.489
Stats 1579.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=95001 bytes_read=303589 bytes_retransmit=9 bytes_invalid=0 send_seq=8371 receive_seq=8371 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=86.1 pwm=0.000 mainboard: temp=37.3 pi: temp=54.0 sysload=1.59 cputime=40.606 memavail=3393692 print_time=1448.821 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.5 pwm=0.723
Stats 1580.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=95479 bytes_read=304084 bytes_retransmit=9 bytes_invalid=0 send_seq=8408 receive_seq=8408 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006830 sd_pos=48468 heater_bed: target=75 temp=85.7 pwm=0.000 mainboard: temp=37.2 pi: temp=54.0 sysload=1.59 cputime=40.716 memavail=3393472 print_time=1449.821 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=1.000
Stats 1581.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=95929 bytes_read=304566 bytes_retransmit=9 bytes_invalid=0 send_seq=8446 receive_seq=8446 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=85.4 pwm=0.000 mainboard: temp=37.2 pi: temp=55.0 sysload=1.59 cputime=40.830 memavail=3393292 print_time=1450.822 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.858
Stats 1582.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=96398 bytes_read=305098 bytes_retransmit=9 bytes_invalid=0 send_seq=8486 receive_seq=8486 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006825 sd_pos=48468 heater_bed: target=75 temp=85.6 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.62 cputime=40.947 memavail=3393316 print_time=1451.822 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.6 pwm=1.000
Stats 1583.0: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000435 mcu_task_stddev=0.000000 bytes_write=96884 bytes_read=305615 bytes_retransmit=9 bytes_invalid=0 send_seq=8524 receive_seq=8524 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006838 sd_pos=48468 heater_bed: target=75 temp=85.8 pwm=0.000 mainboard: temp=37.4 pi: temp=55.5 sysload=1.62 cputime=41.060 memavail=3393096 print_time=1452.822 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.7 pwm=0.607
Stats 1584.0: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000435 mcu_task_stddev=0.000000 bytes_write=97337 bytes_read=306092 bytes_retransmit=9 bytes_invalid=0 send_seq=8561 receive_seq=8561 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006838 sd_pos=48468 heater_bed: target=75 temp=85.6 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.62 cputime=41.173 memavail=3393164 print_time=1453.823 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.5 pwm=0.822
Stats 1585.0: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000435 mcu_task_stddev=0.000000 bytes_write=97818 bytes_read=306593 bytes_retransmit=9 bytes_invalid=0 send_seq=8598 receive_seq=8597 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006838 sd_pos=48468 heater_bed: target=75 temp=85.8 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.62 cputime=41.287 memavail=3392724 print_time=1454.823 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.4 pwm=0.872
Stats 1586.0: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000435 mcu_task_stddev=0.000000 bytes_write=98287 bytes_read=307102 bytes_retransmit=9 bytes_invalid=0 send_seq=8636 receive_seq=8636 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006818 sd_pos=48468 heater_bed: target=75 temp=85.0 pwm=0.000 mainboard: temp=37.3 pi: temp=54.0 sysload=1.62 cputime=41.370 memavail=3392276 print_time=1455.824 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.3 pwm=0.747
Stats 1587.0: gcodein=0  mcu: mcu_awake=0.231 mcu_task_avg=0.000435 mcu_task_stddev=0.000000 bytes_write=98754 bytes_read=307579 bytes_retransmit=9 bytes_invalid=0 send_seq=8673 receive_seq=8673 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006820 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.65 cputime=41.433 memavail=3392204 print_time=1456.825 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.7 pwm=1.000
Stats 1588.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=99200 bytes_read=308088 bytes_retransmit=9 bytes_invalid=0 send_seq=8708 receive_seq=8708 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006811 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.65 cputime=41.496 memavail=3391240 print_time=1457.825 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.4 pwm=0.555
Stats 1589.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=99691 bytes_read=308594 bytes_retransmit=9 bytes_invalid=0 send_seq=8748 receive_seq=8748 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006808 sd_pos=48468 heater_bed: target=75 temp=85.6 pwm=0.000 mainboard: temp=37.4 pi: temp=56.0 sysload=1.65 cputime=41.560 memavail=3391500 print_time=1458.826 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=0.387
Stats 1590.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=100159 bytes_read=309086 bytes_retransmit=9 bytes_invalid=0 send_seq=8787 receive_seq=8787 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006797 sd_pos=48468 heater_bed: target=75 temp=85.2 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.65 cputime=41.622 memavail=3391088 print_time=1459.827 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=0.575
Stats 1591.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=100602 bytes_read=309579 bytes_retransmit=9 bytes_invalid=0 send_seq=8822 receive_seq=8822 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006801 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.3 pi: temp=55.5 sysload=1.65 cputime=41.711 memavail=3391468 print_time=1460.827 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.529
Stats 1592.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000436 mcu_task_stddev=0.000000 bytes_write=101080 bytes_read=310080 bytes_retransmit=9 bytes_invalid=0 send_seq=8861 receive_seq=8861 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006806 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.60 cputime=41.825 memavail=3391484 print_time=1461.828 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.507
Stats 1593.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=101534 bytes_read=310588 bytes_retransmit=9 bytes_invalid=0 send_seq=8900 receive_seq=8900 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816 sd_pos=48468 heater_bed: target=75 temp=85.5 pwm=0.000 mainboard: temp=37.3 pi: temp=55.0 sysload=1.60 cputime=41.935 memavail=3391360 print_time=1462.828 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.5 pwm=0.254
Stats 1594.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=102006 bytes_read=311099 bytes_retransmit=9 bytes_invalid=0 send_seq=8938 receive_seq=8938 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006813 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.2 pi: temp=54.5 sysload=1.60 cputime=42.051 memavail=3391396 print_time=1463.829 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.7 pwm=1.000
Stats 1595.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=102473 bytes_read=311590 bytes_retransmit=9 bytes_invalid=0 send_seq=8975 receive_seq=8975 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006814 sd_pos=48468 heater_bed: target=75 temp=85.3 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.60 cputime=42.163 memavail=3391688 print_time=1464.830 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.576
Stats 1596.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=102956 bytes_read=312080 bytes_retransmit=9 bytes_invalid=0 send_seq=9013 receive_seq=9013 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006814 sd_pos=48468 heater_bed: target=75 temp=85.4 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.60 cputime=42.271 memavail=3395452 print_time=1465.830 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.489
Stats 1597.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=103428 bytes_read=312591 bytes_retransmit=9 bytes_invalid=0 send_seq=9051 receive_seq=9051 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006812 sd_pos=48468 heater_bed: target=75 temp=85.3 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.47 cputime=42.382 memavail=3395004 print_time=1466.831 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.569
Stats 1598.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=103892 bytes_read=313095 bytes_retransmit=9 bytes_invalid=0 send_seq=9088 receive_seq=9088 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006814 sd_pos=48468 heater_bed: target=75 temp=86.0 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.47 cputime=42.494 memavail=3395024 print_time=1467.831 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.856
Stats 1599.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=104383 bytes_read=313590 bytes_retransmit=9 bytes_invalid=0 send_seq=9127 receive_seq=9127 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006812 sd_pos=48468 heater_bed: target=75 temp=84.2 pwm=1.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.47 cputime=42.606 memavail=3394808 print_time=1468.832 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.3 pwm=1.000
Stats 1600.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=104865 bytes_read=314106 bytes_retransmit=9 bytes_invalid=0 send_seq=9166 receive_seq=9166 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006815 sd_pos=48468 heater_bed: target=75 temp=84.1 pwm=0.000 mainboard: temp=37.3 pi: temp=54.5 sysload=1.47 cputime=42.721 memavail=3394816 print_time=1469.832 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.1 pwm=1.000
Stats 1601.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=105343 bytes_read=314589 bytes_retransmit=9 bytes_invalid=0 send_seq=9203 receive_seq=9203 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006848 sd_pos=48468 heater_bed: target=75 temp=84.2 pwm=0.000 mainboard: temp=37.3 pi: temp=55.0 sysload=1.47 cputime=42.831 memavail=3394608 print_time=1470.832 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.1 pwm=0.866
Stats 1602.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000426 mcu_task_stddev=0.000000 bytes_write=105819 bytes_read=315094 bytes_retransmit=9 bytes_invalid=0 send_seq=9244 receive_seq=9244 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852 sd_pos=48468 heater_bed: target=75 temp=84.0 pwm=0.000 mainboard: temp=37.4 pi: temp=54.0 sysload=1.35 cputime=42.943 memavail=3394396 print_time=1471.833 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.1 pwm=0.810
Stats 1603.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=106291 bytes_read=315618 bytes_retransmit=9 bytes_invalid=0 send_seq=9282 receive_seq=9282 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006865 sd_pos=48468 heater_bed: target=75 temp=84.4 pwm=0.000 mainboard: temp=37.3 pi: temp=55.0 sysload=1.35 cputime=43.057 memavail=3394172 print_time=1472.834 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.4 pwm=0.586
Stats 1604.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=106753 bytes_read=316094 bytes_retransmit=9 bytes_invalid=0 send_seq=9316 receive_seq=9316 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006857 sd_pos=48468 heater_bed: target=75 temp=85.1 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.35 cputime=43.157 memavail=3392620 print_time=1473.835 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.017
Stats 1605.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=107201 bytes_read=316566 bytes_retransmit=9 bytes_invalid=0 send_seq=9352 receive_seq=9352 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852 sd_pos=48468 heater_bed: target=75 temp=84.8 pwm=0.000 mainboard: temp=37.4 pi: temp=55.5 sysload=1.35 cputime=43.220 memavail=3392708 print_time=1474.836 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.783
Stats 1606.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=107697 bytes_read=317095 bytes_retransmit=9 bytes_invalid=0 send_seq=9392 receive_seq=9392 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006845 sd_pos=48468 heater_bed: target=75 temp=84.9 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.35 cputime=43.283 memavail=3392496 print_time=1475.836 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.5 pwm=0.258
Stats 1607.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=108171 bytes_read=317596 bytes_retransmit=9 bytes_invalid=0 send_seq=9431 receive_seq=9431 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006833 sd_pos=48468 heater_bed: target=75 temp=84.6 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.41 cputime=43.346 memavail=3396052 print_time=1476.836 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.571
Stats 1608.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=108643 bytes_read=318091 bytes_retransmit=9 bytes_invalid=0 send_seq=9469 receive_seq=9469 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=85.0 pwm=0.000 mainboard: temp=37.4 pi: temp=55.5 sysload=1.41 cputime=43.413 memavail=3395224 print_time=1477.837 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.599
Stats 1609.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=109099 bytes_read=318597 bytes_retransmit=9 bytes_invalid=0 send_seq=9506 receive_seq=9506 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=84.8 pwm=0.000 mainboard: temp=37.5 pi: temp=56.0 sysload=1.41 cputime=43.506 memavail=3395008 print_time=1478.837 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.475
Stats 1610.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=109587 bytes_read=319106 bytes_retransmit=9 bytes_invalid=0 send_seq=9545 receive_seq=9545 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006824 sd_pos=48468 heater_bed: target=75 temp=85.7 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.41 cputime=43.619 memavail=3394052 print_time=1479.838 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.8 pwm=0.094
Stats 1611.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=110056 bytes_read=319588 bytes_retransmit=9 bytes_invalid=0 send_seq=9583 receive_seq=9583 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006834 sd_pos=48468 heater_bed: target=75 temp=82.7 pwm=1.000 mainboard: temp=37.4 pi: temp=55.5 sysload=1.41 cputime=43.729 memavail=3393560 print_time=1480.839 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.6 pwm=1.000
Stats 1612.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000431 mcu_task_stddev=0.000000 bytes_write=110504 bytes_read=320090 bytes_retransmit=9 bytes_invalid=0 send_seq=9621 receive_seq=9621 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006834 sd_pos=48468 heater_bed: target=75 temp=81.8 pwm=1.000 mainboard: temp=37.3 pi: temp=55.0 sysload=1.37 cputime=43.836 memavail=3393104 print_time=1481.840 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.3 pwm=1.000
Stats 1613.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=110967 bytes_read=320607 bytes_retransmit=9 bytes_invalid=0 send_seq=9659 receive_seq=9659 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006833 sd_pos=48468 heater_bed: target=75 temp=81.7 pwm=0.126 mainboard: temp=37.4 pi: temp=53.6 sysload=1.37 cputime=43.947 memavail=3393168 print_time=1482.840 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.1 pwm=1.000
Stats 1614.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=111406 bytes_read=321084 bytes_retransmit=9 bytes_invalid=0 send_seq=9696 receive_seq=9696 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006835 sd_pos=48468 heater_bed: target=75 temp=81.5 pwm=0.000 mainboard: temp=37.3 pi: temp=54.0 sysload=1.37 cputime=44.058 memavail=3392972 print_time=1483.841 buffer_time=0.000 print_stall=0 extruder: target=245 temp=242.7 pwm=1.000
Stats 1615.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=111864 bytes_read=321608 bytes_retransmit=9 bytes_invalid=0 send_seq=9735 receive_seq=9735 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006838 sd_pos=48468 heater_bed: target=75 temp=81.4 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.37 cputime=44.170 memavail=3393268 print_time=1484.841 buffer_time=0.000 print_stall=0 extruder: target=245 temp=242.7 pwm=1.000
Stats 1616.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=112312 bytes_read=322094 bytes_retransmit=9 bytes_invalid=0 send_seq=9771 receive_seq=9771 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006843 sd_pos=48468 heater_bed: target=75 temp=81.3 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.37 cputime=44.276 memavail=3392564 print_time=1485.842 buffer_time=0.000 print_stall=0 extruder: target=245 temp=242.7 pwm=0.940
Stats 1617.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000429 mcu_task_stddev=0.000000 bytes_write=112773 bytes_read=322576 bytes_retransmit=9 bytes_invalid=0 send_seq=9809 receive_seq=9809 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006842 sd_pos=48468 heater_bed: target=75 temp=81.4 pwm=0.000 mainboard: temp=37.4 pi: temp=55.5 sysload=1.58 cputime=44.381 memavail=3395852 print_time=1486.843 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.0 pwm=0.772
Stats 1618.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=113255 bytes_read=323118 bytes_retransmit=9 bytes_invalid=0 send_seq=9849 receive_seq=9849 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006845 sd_pos=48468 heater_bed: target=75 temp=81.4 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.58 cputime=44.490 memavail=3395612 print_time=1487.843 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.1 pwm=0.823
Stats 1619.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=113733 bytes_read=323609 bytes_retransmit=9 bytes_invalid=0 send_seq=9886 receive_seq=9886 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006916 sd_pos=48468 heater_bed: target=75 temp=81.4 pwm=0.000 mainboard: temp=37.5 pi: temp=55.5 sysload=1.58 cputime=44.601 memavail=3395392 print_time=1488.844 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.5 pwm=0.616
Stats 1620.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=114178 bytes_read=324086 bytes_retransmit=9 bytes_invalid=0 send_seq=9923 receive_seq=9923 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006900 sd_pos=48468 heater_bed: target=75 temp=81.4 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.58 cputime=44.707 memavail=3395456 print_time=1489.844 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.9 pwm=0.497
Stats 1621.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=114671 bytes_read=324629 bytes_retransmit=9 bytes_invalid=0 send_seq=9963 receive_seq=9963 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=400006891 sd_pos=48468 heater_bed: target=75 temp=81.5 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.58 cputime=44.823 memavail=3395016 print_time=1490.845 buffer_time=0.000 print_stall=0 extruder: target=245 temp=243.9 pwm=0.911
Stats 1622.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=115148 bytes_read=325113 bytes_retransmit=9 bytes_invalid=0 send_seq=10002 receive_seq=10002 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006891 sd_pos=48468 heater_bed: target=75 temp=81.5 pwm=0.000 mainboard: temp=37.6 pi: temp=55.0 sysload=1.62 cputime=44.939 memavail=3395028 print_time=1491.846 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.6 pwm=0.407
Stats 1623.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=115611 bytes_read=325623 bytes_retransmit=9 bytes_invalid=0 send_seq=10041 receive_seq=10041 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006892 sd_pos=48468 heater_bed: target=75 temp=81.5 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.62 cputime=45.053 memavail=3394792 print_time=1492.847 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.8 pwm=0.428
Stats 1624.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=116107 bytes_read=326151 bytes_retransmit=9 bytes_invalid=0 send_seq=10081 receive_seq=10081 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006878 sd_pos=48468 heater_bed: target=75 temp=81.5 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.62 cputime=45.169 memavail=3394136 print_time=1493.847 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=0.518
Stats 1625.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=116554 bytes_read=326633 bytes_retransmit=9 bytes_invalid=0 send_seq=10119 receive_seq=10119 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006867 sd_pos=48468 heater_bed: target=75 temp=81.5 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.62 cputime=45.283 memavail=3394148 print_time=1494.849 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=0.674
Stats 1626.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=117021 bytes_read=327125 bytes_retransmit=9 bytes_invalid=0 send_seq=10156 receive_seq=10156 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006867 sd_pos=48468 heater_bed: target=75 temp=81.5 pwm=0.000 mainboard: temp=37.5 pi: temp=55.5 sysload=1.62 cputime=45.391 memavail=3393028 print_time=1495.850 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.406
Stats 1627.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=117519 bytes_read=327658 bytes_retransmit=9 bytes_invalid=0 send_seq=10197 receive_seq=10197 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006852 sd_pos=48468 heater_bed: target=75 temp=81.6 pwm=0.000 mainboard: temp=37.3 pi: temp=55.5 sysload=1.81 cputime=45.504 memavail=3393032 print_time=1496.850 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.669
Stats 1628.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=117964 bytes_read=328148 bytes_retransmit=9 bytes_invalid=0 send_seq=10234 receive_seq=10234 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006849 sd_pos=48468 heater_bed: target=75 temp=81.6 pwm=0.000 mainboard: temp=37.6 pi: temp=55.0 sysload=1.81 cputime=45.620 memavail=3393064 print_time=1497.851 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.669
Stats 1629.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=118425 bytes_read=328645 bytes_retransmit=9 bytes_invalid=0 send_seq=10272 receive_seq=10272 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846 sd_pos=48468 heater_bed: target=75 temp=81.6 pwm=0.000 mainboard: temp=37.5 pi: temp=55.5 sysload=1.81 cputime=45.733 memavail=3392840 print_time=1498.851 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.613
Stats 1630.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=118918 bytes_read=329173 bytes_retransmit=9 bytes_invalid=0 send_seq=10312 receive_seq=10312 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006848 sd_pos=48468 heater_bed: target=75 temp=81.6 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.81 cputime=45.848 memavail=3392616 print_time=1499.853 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.2 pwm=1.000
Stats 1631.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=119395 bytes_read=329660 bytes_retransmit=9 bytes_invalid=0 send_seq=10351 receive_seq=10351 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006851 sd_pos=48468 heater_bed: target=75 temp=81.6 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.81 cputime=45.958 memavail=3395988 print_time=1500.853 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.8 pwm=0.682
Stats 1632.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=119848 bytes_read=330152 bytes_retransmit=9 bytes_invalid=0 send_seq=10388 receive_seq=10388 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006852 sd_pos=48468 heater_bed: target=75 temp=81.4 pwm=0.000 mainboard: temp=37.5 pi: temp=56.0 sysload=1.82 cputime=46.071 memavail=3395760 print_time=1501.853 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.8 pwm=0.763
Stats 1633.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=120338 bytes_read=330692 bytes_retransmit=9 bytes_invalid=0 send_seq=10429 receive_seq=10429 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006848 sd_pos=48468 heater_bed: target=75 temp=81.2 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.82 cputime=46.185 memavail=3395572 print_time=1502.854 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.7 pwm=0.858
Stats 1634.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=120818 bytes_read=331173 bytes_retransmit=9 bytes_invalid=0 send_seq=10467 receive_seq=10467 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006872 sd_pos=48468 heater_bed: target=75 temp=81.2 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.82 cputime=46.293 memavail=3395360 print_time=1503.855 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.8 pwm=0.717
Stats 1635.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=121285 bytes_read=331665 bytes_retransmit=9 bytes_invalid=0 send_seq=10504 receive_seq=10504 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006862 sd_pos=48468 heater_bed: target=75 temp=81.2 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.82 cputime=46.408 memavail=3395236 print_time=1504.855 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.9 pwm=0.421
Stats 1636.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=121751 bytes_read=332188 bytes_retransmit=9 bytes_invalid=0 send_seq=10543 receive_seq=10543 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006882 sd_pos=48468 heater_bed: target=75 temp=81.1 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.82 cputime=46.518 memavail=3395020 print_time=1505.856 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.554
Stats 1637.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000425 mcu_task_stddev=0.000000 bytes_write=122208 bytes_read=332655 bytes_retransmit=9 bytes_invalid=0 send_seq=10578 receive_seq=10578 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006879 sd_pos=48468 heater_bed: target=75 temp=81.2 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.76 cputime=46.628 memavail=3395048 print_time=1506.856 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.0 pwm=0.697
Stats 1638.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=122699 bytes_read=333175 bytes_retransmit=9 bytes_invalid=0 send_seq=10618 receive_seq=10618 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006873 sd_pos=48468 heater_bed: target=75 temp=81.2 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.76 cputime=46.744 memavail=3394840 print_time=1507.856 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.375
Stats 1639.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=123161 bytes_read=333703 bytes_retransmit=9 bytes_invalid=0 send_seq=10658 receive_seq=10658 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006868 sd_pos=48468 heater_bed: target=75 temp=81.3 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.76 cputime=46.855 memavail=3394976 print_time=1508.858 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.510
Stats 1640.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=123633 bytes_read=334185 bytes_retransmit=9 bytes_invalid=0 send_seq=10696 receive_seq=10696 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006863 sd_pos=48468 heater_bed: target=75 temp=81.2 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.76 cputime=46.967 memavail=3394988 print_time=1509.858 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.512
Stats 1641.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=124115 bytes_read=334700 bytes_retransmit=9 bytes_invalid=0 send_seq=10736 receive_seq=10736 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006867 sd_pos=48468 heater_bed: target=75 temp=81.0 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.76 cputime=47.081 memavail=3395012 print_time=1510.858 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.745
Stats 1642.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=124592 bytes_read=335215 bytes_retransmit=9 bytes_invalid=0 send_seq=10775 receive_seq=10775 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006866 sd_pos=48468 heater_bed: target=75 temp=81.0 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.94 cputime=47.196 memavail=3394304 print_time=1511.859 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.615
Stats 1643.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=125050 bytes_read=335710 bytes_retransmit=9 bytes_invalid=0 send_seq=10813 receive_seq=10813 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006872 sd_pos=48468 heater_bed: target=75 temp=80.9 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.94 cputime=47.316 memavail=3394332 print_time=1512.859 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.673
Stats 1644.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=125542 bytes_read=336224 bytes_retransmit=9 bytes_invalid=0 send_seq=10852 receive_seq=10852 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006871 sd_pos=48468 heater_bed: target=75 temp=80.9 pwm=0.000 mainboard: temp=37.5 pi: temp=56.0 sysload=1.94 cputime=47.433 memavail=3394332 print_time=1513.860 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.790
Stats 1645.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=126011 bytes_read=336734 bytes_retransmit=9 bytes_invalid=0 send_seq=10890 receive_seq=10890 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006860 sd_pos=48468 heater_bed: target=75 temp=80.7 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.94 cputime=47.546 memavail=3394332 print_time=1514.861 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.621
Stats 1646.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=126489 bytes_read=337211 bytes_retransmit=9 bytes_invalid=0 send_seq=10927 receive_seq=10927 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006846 sd_pos=48468 heater_bed: target=75 temp=80.9 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.94 cputime=47.626 memavail=3393596 print_time=1515.862 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.526
Stats 1647.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000421 mcu_task_stddev=0.000000 bytes_write=126971 bytes_read=337713 bytes_retransmit=9 bytes_invalid=0 send_seq=10967 receive_seq=10966 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006836 sd_pos=48468 heater_bed: target=75 temp=80.7 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.78 cputime=47.691 memavail=3393344 print_time=1516.862 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.681
Stats 1648.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=127426 bytes_read=338254 bytes_retransmit=9 bytes_invalid=0 send_seq=11006 receive_seq=11006 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006822 sd_pos=48468 heater_bed: target=75 temp=80.7 pwm=0.000 mainboard: temp=37.4 pi: temp=56.0 sysload=1.78 cputime=47.755 memavail=3393352 print_time=1517.863 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.599
Stats 1649.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=127892 bytes_read=338741 bytes_retransmit=9 bytes_invalid=0 send_seq=11045 receive_seq=11045 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006810 sd_pos=48468 heater_bed: target=75 temp=80.7 pwm=0.000 mainboard: temp=37.5 pi: temp=56.0 sysload=1.78 cputime=47.819 memavail=3393376 print_time=1518.863 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.556
Stats 1650.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=128361 bytes_read=339238 bytes_retransmit=9 bytes_invalid=0 send_seq=11083 receive_seq=11083 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006806 sd_pos=48468 heater_bed: target=75 temp=80.5 pwm=0.000 mainboard: temp=37.5 pi: temp=56.0 sysload=1.78 cputime=47.882 memavail=3393376 print_time=1519.864 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.650
Stats 1651.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=128839 bytes_read=339753 bytes_retransmit=9 bytes_invalid=0 send_seq=11122 receive_seq=11122 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006802 sd_pos=48468 heater_bed: target=75 temp=80.5 pwm=0.000 mainboard: temp=37.5 pi: temp=55.5 sysload=1.78 cputime=47.980 memavail=3393392 print_time=1520.865 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.499
Stats 1652.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000427 mcu_task_stddev=0.000000 bytes_write=129310 bytes_read=340243 bytes_retransmit=9 bytes_invalid=0 send_seq=11160 receive_seq=11160 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006807 sd_pos=48468 heater_bed: target=75 temp=80.5 pwm=0.000 mainboard: temp=37.5 pi: temp=56.0 sysload=1.72 cputime=48.097 memavail=3393400 print_time=1521.865 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.618
Stats 1653.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=129787 bytes_read=340758 bytes_retransmit=9 bytes_invalid=0 send_seq=11199 receive_seq=11199 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006803 sd_pos=48468 heater_bed: target=75 temp=80.6 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.72 cputime=48.209 memavail=3393400 print_time=1522.866 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.643
Stats 1654.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=130253 bytes_read=341267 bytes_retransmit=9 bytes_invalid=0 send_seq=11238 receive_seq=11237 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006806 sd_pos=48468 heater_bed: target=75 temp=80.6 pwm=0.000 mainboard: temp=37.6 pi: temp=55.0 sysload=1.72 cputime=48.320 memavail=3393404 print_time=1523.867 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.586
Stats 1655.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=130720 bytes_read=341750 bytes_retransmit=9 bytes_invalid=0 send_seq=11275 receive_seq=11275 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006810 sd_pos=48468 heater_bed: target=75 temp=80.4 pwm=0.000 mainboard: temp=37.5 pi: temp=54.0 sysload=1.72 cputime=48.435 memavail=3393440 print_time=1524.868 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.593
Stats 1656.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=131181 bytes_read=342247 bytes_retransmit=9 bytes_invalid=0 send_seq=11313 receive_seq=11313 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006816 sd_pos=48468 heater_bed: target=75 temp=80.5 pwm=0.000 mainboard: temp=37.4 pi: temp=54.5 sysload=1.72 cputime=48.547 memavail=3393188 print_time=1525.869 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.601
Stats 1657.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000424 mcu_task_stddev=0.000000 bytes_write=131685 bytes_read=342775 bytes_retransmit=9 bytes_invalid=0 send_seq=11353 receive_seq=11353 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006834 sd_pos=48468 heater_bed: target=75 temp=80.4 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.58 cputime=48.668 memavail=3392248 print_time=1526.869 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.644
Stats 1658.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=132125 bytes_read=343260 bytes_retransmit=9 bytes_invalid=0 send_seq=11389 receive_seq=11389 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006825 sd_pos=48468 heater_bed: target=75 temp=80.4 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.58 cputime=48.758 memavail=3392032 print_time=1527.869 buffer_time=0.000 print_stall=0 extruder: target=245 temp=244.8 pwm=1.000
Stats 1659.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=132578 bytes_read=343752 bytes_retransmit=9 bytes_invalid=0 send_seq=11426 receive_seq=11426 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006815 sd_pos=48468 heater_bed: target=75 temp=80.3 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.58 cputime=48.829 memavail=3392140 print_time=1528.870 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.646
Stats 1660.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=133045 bytes_read=344257 bytes_retransmit=9 bytes_invalid=0 send_seq=11463 receive_seq=11463 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006828 sd_pos=48468 heater_bed: target=75 temp=80.4 pwm=0.000 mainboard: temp=37.6 pi: temp=54.5 sysload=1.58 cputime=48.893 memavail=3392140 print_time=1529.871 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.598
Stats 1661.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=133527 bytes_read=344757 bytes_retransmit=9 bytes_invalid=0 send_seq=11503 receive_seq=11503 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006826 sd_pos=48468 heater_bed: target=75 temp=80.3 pwm=0.000 mainboard: temp=37.4 pi: temp=56.0 sysload=1.58 cputime=48.957 memavail=3391900 print_time=1530.872 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.4 pwm=0.483
Stats 1662.0: gcodein=0  mcu: mcu_awake=0.228 mcu_task_avg=0.000433 mcu_task_stddev=0.000000 bytes_write=133982 bytes_read=345259 bytes_retransmit=9 bytes_invalid=0 send_seq=11542 receive_seq=11542 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006815 sd_pos=48468 heater_bed: target=75 temp=80.2 pwm=0.000 mainboard: temp=37.5 pi: temp=56.0 sysload=1.53 cputime=49.023 memavail=3391908 print_time=1531.872 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.669
Stats 1663.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=134459 bytes_read=345787 bytes_retransmit=9 bytes_invalid=0 send_seq=11581 receive_seq=11581 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400006817 sd_pos=48468 heater_bed: target=75 temp=80.1 pwm=0.000 mainboard: temp=37.4 pi: temp=55.0 sysload=1.53 cputime=49.113 memavail=3391908 print_time=1532.873 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.1 pwm=0.736
Stats 1664.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=134928 bytes_read=346269 bytes_retransmit=9 bytes_invalid=0 send_seq=11619 receive_seq=11619 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006813 sd_pos=48468 heater_bed: target=75 temp=80.1 pwm=0.000 mainboard: temp=37.4 pi: temp=55.5 sysload=1.53 cputime=49.221 memavail=3391936 print_time=1533.873 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.532
Stats 1665.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=135418 bytes_read=346786 bytes_retransmit=9 bytes_invalid=0 send_seq=11660 receive_seq=11660 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006805 sd_pos=48468 heater_bed: target=75 temp=80.2 pwm=0.000 mainboard: temp=37.4 pi: temp=55.5 sysload=1.53 cputime=49.333 memavail=3391936 print_time=1534.874 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.613
Stats 1666.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=135892 bytes_read=347296 bytes_retransmit=9 bytes_invalid=0 send_seq=11699 receive_seq=11699 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006802 sd_pos=48468 heater_bed: target=75 temp=80.1 pwm=0.000 mainboard: temp=37.5 pi: temp=54.5 sysload=1.53 cputime=49.447 memavail=3391260 print_time=1535.875 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.622
Stats 1667.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000423 mcu_task_stddev=0.000000 bytes_write=136353 bytes_read=347778 bytes_retransmit=9 bytes_invalid=0 send_seq=11737 receive_seq=11737 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006795 sd_pos=48468 heater_bed: target=75 temp=80.0 pwm=0.000 mainboard: temp=37.6 pi: temp=54.5 sysload=1.41 cputime=49.597 memavail=3391260 print_time=1536.875 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.627
Stats 1668.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000418 mcu_task_stddev=0.000000 bytes_write=136830 bytes_read=348293 bytes_retransmit=9 bytes_invalid=0 send_seq=11776 receive_seq=11776 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006792 sd_pos=48468 heater_bed: target=75 temp=80.1 pwm=0.000 mainboard: temp=37.6 pi: temp=55.5 sysload=1.41 cputime=49.709 memavail=3391264 print_time=1537.875 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.704
Stats 1669.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000418 mcu_task_stddev=0.000000 bytes_write=137311 bytes_read=348803 bytes_retransmit=9 bytes_invalid=0 send_seq=11814 receive_seq=11814 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=400006787 sd_pos=48468 heater_bed: target=75 temp=80.0 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.41 cputime=49.824 memavail=3391044 print_time=1538.876 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.2 pwm=0.597
Stats 1670.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000418 mcu_task_stddev=0.000000 bytes_write=137769 bytes_read=349288 bytes_retransmit=9 bytes_invalid=0 send_seq=11851 receive_seq=11851 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006780 sd_pos=48468 heater_bed: target=75 temp=80.1 pwm=0.000 mainboard: temp=37.5 pi: temp=55.0 sysload=1.41 cputime=49.936 memavail=3391064 print_time=1539.877 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.467
Stats 1671.0: gcodein=0  mcu: mcu_awake=0.226 mcu_task_avg=0.000418 mcu_task_stddev=0.000000 bytes_write=138216 bytes_read=349785 bytes_retransmit=9 bytes_invalid=0 send_seq=11889 receive_seq=11889 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006782 sd_pos=48468 heater_bed: target=75 temp=80.1 pwm=0.000 mainboard: temp=37.6 pi: temp=55.5 sysload=1.41 cputime=50.046 memavail=3390860 print_time=1540.878 buffer_time=0.000 print_stall=0 extruder: target=245 temp=245.3 pwm=0.539