===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
step_distance = .0125
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
step_distance = .0125
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
step_distance = .0025
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 0.010526
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>
=======================
Args: ['/home/admin/klipper/klippy/klippy.py', '/home/admin/printer_data/config/printer.cfg', '-l', '/home/admin/printer_data/logs/klippy.log', '-I', '/home/admin/printer_data/comms/klippy.serial', '-a', '/home/admin/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-205-g5f0d252b'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
webhooks client 547834146720: {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
=============== Log rollover at Thu Nov  9 18:09:56 2023 ===============
Attempting MCU 'mcu' reset
webhooks client 547834146720: Disconnected
Restarting printer
Start printer at Thu Nov  9 18:09:58 2023 (1699571398.2 401.7)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
step_distance = .0125
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
step_distance = .0125
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
step_distance = .0025
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 0.010526
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/admin/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 101, in load_config_prefix
    return TMC2209(config)
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 77, in __init__
    tmc.TMCStealthchopHelper(config, self.mcu_tmc, TMC_FREQUENCY)
  File "/home/admin/klipper/klippy/extras/tmc.py", line 602, in TMCStealthchopHelper
    rotation_dist, steps_per_rotation = stepper.parse_step_distance(sconfig)
  File "/home/admin/klipper/klippy/stepper.py", line 275, in parse_step_distance
    rotation_dist = config.getfloat('rotation_distance', above=0.,
  File "/home/admin/klipper/klippy/configfile.py", line 65, in getfloat
    return self._get_wrapper(self.fileconfig.getfloat, option, default,
  File "/home/admin/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'rotation_distance' in section 'stepper_x' must be specified
webhooks client 547834190000: New connection
webhooks client 547834190000: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547834190000: Disconnected
Restarting printer
Start printer at Thu Nov  9 18:12:07 2023 (1699571527.6 531.1)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
step_distance = .0125
endstop_pin = ^PC0
position_endstop = 217
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
step_distance = .0125
endstop_pin = ^PC1
position_endstop = 217
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
step_distance = .0025
endstop_pin = ^PC2
position_endstop = 247
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 0.010526
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/admin/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 101, in load_config_prefix
    return TMC2209(config)
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 77, in __init__
    tmc.TMCStealthchopHelper(config, self.mcu_tmc, TMC_FREQUENCY)
  File "/home/admin/klipper/klippy/extras/tmc.py", line 602, in TMCStealthchopHelper
    rotation_dist, steps_per_rotation = stepper.parse_step_distance(sconfig)
  File "/home/admin/klipper/klippy/stepper.py", line 275, in parse_step_distance
    rotation_dist = config.getfloat('rotation_distance', above=0.,
  File "/home/admin/klipper/klippy/configfile.py", line 65, in getfloat
    return self._get_wrapper(self.fileconfig.getfloat, option, default,
  File "/home/admin/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'rotation_distance' in section 'stepper_x' must be specified
webhooks client 547833569488: New connection
webhooks client 547833569488: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547833569488: Disconnected
Restarting printer
Start printer at Thu Nov  9 18:13:17 2023 (1699571598.0 601.5)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
step_distance = .0125
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
step_distance = .0125
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
step_distance = .0025
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 0.010526
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/admin/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 101, in load_config_prefix
    return TMC2209(config)
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 77, in __init__
    tmc.TMCStealthchopHelper(config, self.mcu_tmc, TMC_FREQUENCY)
  File "/home/admin/klipper/klippy/extras/tmc.py", line 602, in TMCStealthchopHelper
    rotation_dist, steps_per_rotation = stepper.parse_step_distance(sconfig)
  File "/home/admin/klipper/klippy/stepper.py", line 275, in parse_step_distance
    rotation_dist = config.getfloat('rotation_distance', above=0.,
  File "/home/admin/klipper/klippy/configfile.py", line 65, in getfloat
    return self._get_wrapper(self.fileconfig.getfloat, option, default,
  File "/home/admin/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'rotation_distance' in section 'stepper_x' must be specified
webhooks client 547833833504: New connection
webhooks client 547833833504: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547833833504: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:13:59 2023 (1699575239.4 4243.0)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0125
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
step_distance = .0125
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
step_distance = .0025
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 0.010526
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/admin/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 101, in load_config_prefix
    return TMC2209(config)
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 77, in __init__
    tmc.TMCStealthchopHelper(config, self.mcu_tmc, TMC_FREQUENCY)
  File "/home/admin/klipper/klippy/extras/tmc.py", line 602, in TMCStealthchopHelper
    rotation_dist, steps_per_rotation = stepper.parse_step_distance(sconfig)
  File "/home/admin/klipper/klippy/stepper.py", line 275, in parse_step_distance
    rotation_dist = config.getfloat('rotation_distance', above=0.,
  File "/home/admin/klipper/klippy/configfile.py", line 65, in getfloat
    return self._get_wrapper(self.fileconfig.getfloat, option, default,
  File "/home/admin/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'rotation_distance' in section 'stepper_y' must be specified
webhooks client 547833570928: New connection
webhooks client 547833570928: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547833570928: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:17:13 2023 (1699575433.2 4436.8)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0125
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0125
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0025
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 0.010526
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/admin/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 101, in load_config_prefix
    return TMC2209(config)
  File "/home/admin/klipper/klippy/extras/tmc2209.py", line 77, in __init__
    tmc.TMCStealthchopHelper(config, self.mcu_tmc, TMC_FREQUENCY)
  File "/home/admin/klipper/klippy/extras/tmc.py", line 602, in TMCStealthchopHelper
    rotation_dist, steps_per_rotation = stepper.parse_step_distance(sconfig)
  File "/home/admin/klipper/klippy/stepper.py", line 275, in parse_step_distance
    rotation_dist = config.getfloat('rotation_distance', above=0.,
  File "/home/admin/klipper/klippy/configfile.py", line 65, in getfloat
    return self._get_wrapper(self.fileconfig.getfloat, option, default,
  File "/home/admin/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'rotation_distance' in section 'extruder' must be specified
webhooks client 547834146528: New connection
webhooks client 547834146528: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547834146528: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:17:40 2023 (1699575460.1 4463.7)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0125
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0125
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0025
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 0.010526
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/admin/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'step_distance' is not valid in section 'stepper_x'
webhooks client 547833835472: New connection
webhooks client 547833835472: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547833835472: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:18:01 2023 (1699575481.5 4485.1)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0125
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0125
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .0025
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 0.010526
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/admin/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'step_distance' is not valid in section 'stepper_x'
webhooks client 547827809632: New connection
webhooks client 547827809632: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547827809632: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:19:22 2023 (1699575562.0 4565.6)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 1.8
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/admin/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'step_distance' is not valid in section 'stepper_x'
webhooks client 547834731680: New connection
webhooks client 547834731680: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547834731680: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:19:56 2023 (1699575596.5 4600.1)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = .8888
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 1.8
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/admin/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'step_distance' is not valid in section 'stepper_x'
webhooks client 547827574432: New connection
webhooks client 547827574432: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547827574432: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:20:10 2023 (1699575610.7 4614.3)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 1.8
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/admin/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'microsteps' is not valid in section 'tmc2209 stepper_x'
webhooks client 547833598544: New connection
webhooks client 547833598544: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547833598544: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:20:51 2023 (1699575651.9 4655.4)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 1.8
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/admin/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'microsteps' is not valid in section 'tmc2209 stepper_x'
webhooks client 547832578208: New connection
webhooks client 547832578208: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547832578208: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:21:22 2023 (1699575682.7 4686.2)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
step_distance = 1.8
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
microsteps = 16
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 1.8
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/admin/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'step_distance' is not valid in section 'stepper_y'
webhooks client 547833431424: New connection
webhooks client 547833431424: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547833431424: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:21:56 2023 (1699575716.7 4720.3)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
step_distance = 1.8
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
microsteps = 16
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/admin/klipper/klippy/configfile.py", line 304, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'step_distance' is not valid in section 'extruder'
webhooks client 547832657664: New connection
webhooks client 547832657664: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
Attempting MCU 'mcu' reset
webhooks client 547832657664: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:22:17 2023 (1699575737.6 4741.2)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 547828080592: New connection
webhooks client 547828080592: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/admin/klipper/klippy/klippy.py', '/home/admin/printer_data/config/printer.cfg', '-l', '/home/admin/printer_data/logs/klippy.log', '-I', '/home/admin/printer_data/comms/klippy.serial', '-a', '/home/admin/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Building C code module c_helper.so
Starting Klippy...
Args: ['/home/admin/klipper/klippy/klippy.py', '/home/admin/printer_data/config/printer.cfg', '-l', '/home/admin/printer_data/logs/klippy.log', '-I', '/home/admin/printer_data/comms/klippy.serial', '-a', '/home/admin/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Building C code module c_helper.so
Start printer at Thu Nov  9 19:23:13 2023 (1699575793.9 4797.5)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548404408672: New connection
webhooks client 548404408672: Client info {'program': 'Moonraker', 'version': 'v0.8.0-41-g348b7f5'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 548404408672: Disconnected
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 548404760688: New connection
webhooks client 548404760688: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
b'Got EOF when reading from device'
mcu 'mcu': Timeout on connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Attempting MCU 'mcu' reset
webhooks client 548404760688: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:24:35 2023 (1699575875.6 4879.2)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548404141600: New connection
webhooks client 548404141600: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
webhooks client 548404141600: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:24:40 2023 (1699575880.8 4884.4)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548404218176: New connection
webhooks client 548404218176: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 548404218176: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:25:07 2023 (1699575907.4 4910.9)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548404886592: New connection
webhooks client 548404886592: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/mcu.py", line 800, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/admin/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/admin/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/mcu.py", line 805, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/admin/klipper/klippy/../.config(3318): Tue Nov  7 17:06:31 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32h743xx"
CONFIG_CLOCK_FREQ=400000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_SIZE=0x200000
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x20000
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x8020000
CONFIG_STM32_SELECT=y
# CONFIG_MACH_STM32F103 is not set
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F765 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32G070 is not set
# CONFIG_MACH_STM32G071 is not set
# CONFIG_MACH_STM32G0B0 is not set
# CONFIG_MACH_STM32G0B1 is not set
# CONFIG_MACH_STM32G431 is not set
# CONFIG_MACH_STM32H723 is not set
CONFIG_MACH_STM32H743=y
# CONFIG_MACH_STM32H750 is not set
# CONFIG_MACH_STM32L412 is not set
# CONFIG_MACH_N32G452 is not set
# CONFIG_MACH_N32G455 is not set
CONFIG_MACH_STM32H7=y
CONFIG_HAVE_STM32_USBOTG=y
CONFIG_HAVE_STM32_FDCANBUS=y
CONFIG_HAVE_STM32_USBCANBUS=y
CONFIG_STM32_DFU_ROM_ADDRESS=0x1ff09800
CONFIG_STM32_FLASH_START_20000=y
# CONFIG_STM32_FLASH_START_0000 is not set
# CONFIG_STM32_CLOCK_REF_8M is not set
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_20M is not set
# CONFIG_STM32_CLOCK_REF_24M is not set
CONFIG_STM32_CLOCK_REF_25M=y
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=25000000
CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12=y
# CONFIG_STM32_USB_PB14_PB15 is not set
# CONFIG_STM32_SERIAL_USART1 is not set
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_SERIAL_UART4 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
# CONFIG_STM32_MMENU_CANBUS_PB0_PB1 is not set
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
CONFIG_USB=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"

#
# USB ids
#
# end of USB ids

CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/admin/klipper/klippy/../out/klipper.dict(7840): Tue Nov  7 17:06:55 2023
Last MCU build version: v0.11.0-205-g5f0d252b
Last MCU build tools: gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2
Last MCU build config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Build file /home/admin/klipper/klippy/../out/klipper.elf(1752608): Tue Nov  7 17:07:03 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Attempting MCU 'mcu' reset
webhooks client 548404886592: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:27:07 2023 (1699576027.5 5031.0)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548405468512: New connection
webhooks client 548405468512: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Attempting MCU 'mcu' reset
webhooks client 548405468512: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:27:14 2023 (1699576034.1 5037.7)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548404439408: New connection
webhooks client 548404439408: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/mcu.py", line 800, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/admin/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/admin/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/mcu.py", line 805, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/admin/klipper/klippy/../.config(3318): Tue Nov  7 17:06:31 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32h743xx"
CONFIG_CLOCK_FREQ=400000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_SIZE=0x200000
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x20000
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x8020000
CONFIG_STM32_SELECT=y
# CONFIG_MACH_STM32F103 is not set
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F765 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32G070 is not set
# CONFIG_MACH_STM32G071 is not set
# CONFIG_MACH_STM32G0B0 is not set
# CONFIG_MACH_STM32G0B1 is not set
# CONFIG_MACH_STM32G431 is not set
# CONFIG_MACH_STM32H723 is not set
CONFIG_MACH_STM32H743=y
# CONFIG_MACH_STM32H750 is not set
# CONFIG_MACH_STM32L412 is not set
# CONFIG_MACH_N32G452 is not set
# CONFIG_MACH_N32G455 is not set
CONFIG_MACH_STM32H7=y
CONFIG_HAVE_STM32_USBOTG=y
CONFIG_HAVE_STM32_FDCANBUS=y
CONFIG_HAVE_STM32_USBCANBUS=y
CONFIG_STM32_DFU_ROM_ADDRESS=0x1ff09800
CONFIG_STM32_FLASH_START_20000=y
# CONFIG_STM32_FLASH_START_0000 is not set
# CONFIG_STM32_CLOCK_REF_8M is not set
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_20M is not set
# CONFIG_STM32_CLOCK_REF_24M is not set
CONFIG_STM32_CLOCK_REF_25M=y
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=25000000
CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12=y
# CONFIG_STM32_USB_PB14_PB15 is not set
# CONFIG_STM32_SERIAL_USART1 is not set
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_SERIAL_UART4 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
# CONFIG_STM32_MMENU_CANBUS_PB0_PB1 is not set
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
CONFIG_USB=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"

#
# USB ids
#
# end of USB ids

CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/admin/klipper/klippy/../out/klipper.dict(7840): Tue Nov  7 17:06:55 2023
Last MCU build version: v0.11.0-205-g5f0d252b
Last MCU build tools: gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2
Last MCU build config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Build file /home/admin/klipper/klippy/../out/klipper.elf(1752608): Tue Nov  7 17:07:03 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Attempting MCU 'mcu' reset
webhooks client 548404439408: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:30:21 2023 (1699576221.2 5224.7)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 139, in _read_config
    m.add_printer_objects(config)
  File "/home/admin/klipper/klippy/mcu.py", line 1028, in add_printer_objects
    printer.add_object('mcu', MCU(config.getsection('mcu'), mainsync))
  File "/home/admin/klipper/klippy/mcu.py", line 577, in __init__
    self._serialport = config.get('serial')
  File "/home/admin/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/admin/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'serial' in section 'mcu' must be specified
webhooks client 548404412576: New connection
webhooks client 548404412576: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
webhooks client 548404412576: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:30:33 2023 (1699576233.2 5236.8)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Config error
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/admin/klipper/klippy/klippy.py", line 139, in _read_config
    m.add_printer_objects(config)
  File "/home/admin/klipper/klippy/mcu.py", line 1028, in add_printer_objects
    printer.add_object('mcu', MCU(config.getsection('mcu'), mainsync))
  File "/home/admin/klipper/klippy/mcu.py", line 577, in __init__
    self._serialport = config.get('serial')
  File "/home/admin/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/admin/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'serial' in section 'mcu' must be specified
webhooks client 548412590880: New connection
webhooks client 548412590880: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
webhooks client 548412590880: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:30:48 2023 (1699576248.1 5251.7)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548387214960: New connection
webhooks client 548387214960: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/mcu.py", line 800, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/admin/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/admin/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/mcu.py", line 805, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/admin/klipper/klippy/../.config(3318): Tue Nov  7 17:06:31 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32h743xx"
CONFIG_CLOCK_FREQ=400000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_SIZE=0x200000
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x20000
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x8020000
CONFIG_STM32_SELECT=y
# CONFIG_MACH_STM32F103 is not set
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F765 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32G070 is not set
# CONFIG_MACH_STM32G071 is not set
# CONFIG_MACH_STM32G0B0 is not set
# CONFIG_MACH_STM32G0B1 is not set
# CONFIG_MACH_STM32G431 is not set
# CONFIG_MACH_STM32H723 is not set
CONFIG_MACH_STM32H743=y
# CONFIG_MACH_STM32H750 is not set
# CONFIG_MACH_STM32L412 is not set
# CONFIG_MACH_N32G452 is not set
# CONFIG_MACH_N32G455 is not set
CONFIG_MACH_STM32H7=y
CONFIG_HAVE_STM32_USBOTG=y
CONFIG_HAVE_STM32_FDCANBUS=y
CONFIG_HAVE_STM32_USBCANBUS=y
CONFIG_STM32_DFU_ROM_ADDRESS=0x1ff09800
CONFIG_STM32_FLASH_START_20000=y
# CONFIG_STM32_FLASH_START_0000 is not set
# CONFIG_STM32_CLOCK_REF_8M is not set
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_20M is not set
# CONFIG_STM32_CLOCK_REF_24M is not set
CONFIG_STM32_CLOCK_REF_25M=y
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=25000000
CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12=y
# CONFIG_STM32_USB_PB14_PB15 is not set
# CONFIG_STM32_SERIAL_USART1 is not set
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_SERIAL_UART4 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
# CONFIG_STM32_MMENU_CANBUS_PB0_PB1 is not set
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
CONFIG_USB=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"

#
# USB ids
#
# end of USB ids

CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/admin/klipper/klippy/../out/klipper.dict(7840): Tue Nov  7 17:06:55 2023
Last MCU build version: v0.11.0-205-g5f0d252b
Last MCU build tools: gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2
Last MCU build config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Build file /home/admin/klipper/klippy/../out/klipper.elf(1752608): Tue Nov  7 17:07:03 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Attempting MCU 'mcu' reset
webhooks client 548387214960: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:32:29 2023 (1699576349.5 5353.1)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548387092272: New connection
webhooks client 548387092272: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/mcu.py", line 800, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/admin/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/admin/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/mcu.py", line 805, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/admin/klipper/klippy/../.config(3318): Tue Nov  7 17:06:31 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32h743xx"
CONFIG_CLOCK_FREQ=400000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_SIZE=0x200000
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x20000
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x8020000
CONFIG_STM32_SELECT=y
# CONFIG_MACH_STM32F103 is not set
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F765 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32G070 is not set
# CONFIG_MACH_STM32G071 is not set
# CONFIG_MACH_STM32G0B0 is not set
# CONFIG_MACH_STM32G0B1 is not set
# CONFIG_MACH_STM32G431 is not set
# CONFIG_MACH_STM32H723 is not set
CONFIG_MACH_STM32H743=y
# CONFIG_MACH_STM32H750 is not set
# CONFIG_MACH_STM32L412 is not set
# CONFIG_MACH_N32G452 is not set
# CONFIG_MACH_N32G455 is not set
CONFIG_MACH_STM32H7=y
CONFIG_HAVE_STM32_USBOTG=y
CONFIG_HAVE_STM32_FDCANBUS=y
CONFIG_HAVE_STM32_USBCANBUS=y
CONFIG_STM32_DFU_ROM_ADDRESS=0x1ff09800
CONFIG_STM32_FLASH_START_20000=y
# CONFIG_STM32_FLASH_START_0000 is not set
# CONFIG_STM32_CLOCK_REF_8M is not set
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_20M is not set
# CONFIG_STM32_CLOCK_REF_24M is not set
CONFIG_STM32_CLOCK_REF_25M=y
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=25000000
CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12=y
# CONFIG_STM32_USB_PB14_PB15 is not set
# CONFIG_STM32_SERIAL_USART1 is not set
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_SERIAL_UART4 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
# CONFIG_STM32_MMENU_CANBUS_PB0_PB1 is not set
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
CONFIG_USB=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"

#
# USB ids
#
# end of USB ids

CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/admin/klipper/klippy/../out/klipper.dict(7840): Tue Nov  7 17:06:55 2023
Last MCU build version: v0.11.0-205-g5f0d252b
Last MCU build tools: gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2
Last MCU build config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Build file /home/admin/klipper/klippy/../out/klipper.elf(1752608): Tue Nov  7 17:07:03 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/admin/klipper/klippy/serialhdl.py", line 261, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/admin/klipper/klippy/serialhdl.py", line 318, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/admin/klipper/klippy/serialhdl.py", line 253, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 548387092272: Disconnected
Restarting printer
Start printer at Thu Nov  9 19:39:27 2023 (1699576768.0 5771.5)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC0
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC1
position_endstop = 0
position_max = 235
homing_speed = 50

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 250

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
endstop_pin = ^PC2
position_endstop = 0.0
position_max = 250

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
microsteps = 16
rotation_distance = 7.710
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[display]
lcd_type = st7920
cs_pin = EXP1_7
sclk_pin = EXP1_6
sid_pin = EXP1_8
encoder_pins = ^EXP1_5, ^EXP1_3
click_pin = ^!EXP1_2

[output_pin beeper]
pin = EXP1_1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
webhooks client 548404341248: New connection
webhooks client 548404341248: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32H743VX_CDC_in_FS_Mode_3876397C3130-if00'
MCU error during connect
Traceback (most recent call last):
  File "/home/admin/klipper/klippy/mcu.py", line 800, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/admin/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/admin/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/admin/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/admin/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/admin/klipper/klippy/mcu.py", line 805, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/admin/klipper/klippy/../.config(3318): Tue Nov  7 17:06:31 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32h743xx"
CONFIG_CLOCK_FREQ=400000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_SIZE=0x200000
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x20000
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x8020000
CONFIG_STM32_SELECT=y
# CONFIG_MACH_STM32F103 is not set
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F765 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32G070 is not set
# CONFIG_MACH_STM32G071 is not set
# CONFIG_MACH_STM32G0B0 is not set
# CONFIG_MACH_STM32G0B1 is not set
# CONFIG_MACH_STM32G431 is not set
# CONFIG_MACH_STM32H723 is not set
CONFIG_MACH_STM32H743=y
# CONFIG_MACH_STM32H750 is not set
# CONFIG_MACH_STM32L412 is not set
# CONFIG_MACH_N32G452 is not set
# CONFIG_MACH_N32G455 is not set
CONFIG_MACH_STM32H7=y
CONFIG_HAVE_STM32_USBOTG=y
CONFIG_HAVE_STM32_FDCANBUS=y
CONFIG_HAVE_STM32_USBCANBUS=y
CONFIG_STM32_DFU_ROM_ADDRESS=0x1ff09800
CONFIG_STM32_FLASH_START_20000=y
# CONFIG_STM32_FLASH_START_0000 is not set
# CONFIG_STM32_CLOCK_REF_8M is not set
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_20M is not set
# CONFIG_STM32_CLOCK_REF_24M is not set
CONFIG_STM32_CLOCK_REF_25M=y
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=25000000
CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12=y
# CONFIG_STM32_USB_PB14_PB15 is not set
# CONFIG_STM32_SERIAL_USART1 is not set
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_SERIAL_UART4 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
# CONFIG_STM32_MMENU_CANBUS_PB0_PB1 is not set
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
CONFIG_USB=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"

#
# USB ids
#
# end of USB ids

CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/admin/klipper/klippy/../out/klipper.dict(7840): Tue Nov  7 17:06:55 2023
Last MCU build version: v0.11.0-205-g5f0d252b
Last MCU build tools: gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2
Last MCU build config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Build file /home/admin/klipper/klippy/../out/klipper.elf(1752608): Tue Nov  7 17:07:03 2023