===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 54.586
pid_ki = 0.556
pid_kd = 1340.771

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 70
target_temp = 35.0
control = watermark
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATUE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Loaded MCU 'mcu' 105 commands (v0.10.0-563-g354915d2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Configured MCU 'mcu' (1024 moves)
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-579-gee5bdbad'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.18 (default, Jul 14 2021, 08:11:37) \n[GCC 10.2.1 20210110]'
webhooks client 3041870072: {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
=============== Log rollover at Sun Sep 18 06:20:35 2022 ===============
Stats 79541.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=494557 bytes_read=6071854 bytes_retransmit=9 bytes_invalid=0 send_seq=46264 receive_seq=46264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2030.534 memavail=3584180 print_time=35736.203 buffer_time=0.680 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 3041870072: Disconnected
Restarting printer
Start printer at Sun Sep 18 06:20:37 2022 (1663503637.6 79543.5)
===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 54.586
pid_ki = 0.556
pid_kd = 1340.771

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 70
target_temp = 35.0
control = watermark
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
webhooks client 3044244256: New connection
webhooks client 3044244256: Client info {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
Loaded MCU 'mcu' 105 commands (v0.10.0-563-g354915d2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 15.0)    | (40.0, 40.0)
  1   | (107.5, 15.0)   | (107.5, 40.0)
  2   | (175.0, 15.0)   | (175.0, 40.0)
  3   | (242.5, 15.0)   | (242.5, 40.0)
  4   | (310.0, 15.0)   | (310.0, 40.0)
  5   | (310.0, 82.5)   | (310.0, 107.5)
  6   | (242.5, 82.5)   | (242.5, 107.5)
  7   | (175.0, 82.5)   | (175.0, 107.5)
  8   | (107.5, 82.5)   | (107.5, 107.5)
  9   | (40.0, 82.5)    | (40.0, 107.5)
  10  | (40.0, 150.0)   | (40.0, 175.0)
  11  | (107.5, 150.0)  | (107.5, 175.0)
  12  | (175.0, 150.0)  | (175.0, 175.0)
  13  | (242.5, 150.0)  | (242.5, 175.0)
  14  | (310.0, 150.0)  | (310.0, 175.0)
  15  | (310.0, 217.5)  | (310.0, 242.5)
  16  | (242.5, 217.5)  | (242.5, 242.5)
  17  | (175.0, 217.5)  | (175.0, 242.5)
  18  | (107.5, 217.5)  | (107.5, 242.5)
  19  | (40.0, 217.5)   | (40.0, 242.5)
  20  | (40.0, 285.0)   | (40.0, 310.0)
  21  | (107.5, 285.0)  | (107.5, 310.0)
  22  | (175.0, 285.0)  | (175.0, 310.0)
  23  | (242.5, 285.0)  | (242.5, 310.0)
  24  | (310.0, 285.0)  | (310.0, 310.0)
bed_mesh: relative_reference_index 12 is (175.00, 175.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 79546.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3304 bytes_read=6448 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3022 freq=179997303  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.15 cputime=2032.735 memavail=3581920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 3044244256
webhooks: registering remote method 'reboot_machine' for connection id: 3044244256
webhooks: registering remote method 'pause_job_queue' for connection id: 3044244256
webhooks: registering remote method 'start_job_queue' for connection id: 3044244256
webhooks: registering remote method 'timelapse_newframe' for connection id: 3044244256
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 3044244256
webhooks: registering remote method 'timelapse_render' for connection id: 3044244256
Stats 79547.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6630 bytes_read=6844 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001460  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.15 cputime=2032.830 memavail=3581824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79548.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6820 bytes_read=7030 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000030  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.15 cputime=2032.865 memavail=3581800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79549.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6826 bytes_read=7213 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000411  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2032.890 memavail=3581800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79550.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6832 bytes_read=7379 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000493  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.14 cputime=2032.915 memavail=3581808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79551.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6838 bytes_read=7545 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000489  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.14 cputime=2032.940 memavail=3581816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79552.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6844 bytes_read=7711 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000435  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.14 cputime=2032.965 memavail=3581820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79553.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6850 bytes_read=7877 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000304  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.14 cputime=2032.990 memavail=3581704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79554.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6856 bytes_read=8057 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000181  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.14 cputime=2033.016 memavail=3581720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79555.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6862 bytes_read=8223 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000190  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.13 cputime=2033.042 memavail=3581568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79556.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6868 bytes_read=8389 bytes_retransmit=9 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000142  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.13 cputime=2033.068 memavail=3581228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79557.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6874 bytes_read=8555 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000054  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2033.094 memavail=3581208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79558.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6880 bytes_read=8721 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999971  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.13 cputime=2033.121 memavail=3581140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79559.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6886 bytes_read=8901 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999907  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2033.147 memavail=3581132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79560.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6892 bytes_read=9067 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999852  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.12 cputime=2033.175 memavail=3580976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79561.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6898 bytes_read=9233 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999826  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.12 cputime=2033.203 memavail=3580916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79562.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6904 bytes_read=9399 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999810  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.12 cputime=2033.228 memavail=3580800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79563.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6910 bytes_read=9565 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999787  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.12 cputime=2033.253 memavail=3580864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79564.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6916 bytes_read=9745 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999762  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.12 cputime=2033.279 memavail=3580864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79565.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6922 bytes_read=9911 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999743  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.11 cputime=2033.304 memavail=3580876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79566.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6928 bytes_read=10077 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999769  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.11 cputime=2033.331 memavail=3580160 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79567.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6934 bytes_read=10238 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999742  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.11 cputime=2033.356 memavail=3580172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79568.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6940 bytes_read=10393 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999719  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.11 cputime=2033.384 memavail=3580296 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79569.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6946 bytes_read=10572 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999707  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.11 cputime=2033.411 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79570.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6952 bytes_read=10738 bytes_retransmit=9 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999691  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.10 cputime=2033.435 memavail=3580564 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79571.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6958 bytes_read=10904 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999671  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.10 cputime=2033.460 memavail=3580564 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79572.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6964 bytes_read=11070 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999658  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2033.486 memavail=3580596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79573.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6970 bytes_read=11236 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999638  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.10 cputime=2033.508 memavail=3580608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79574.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6976 bytes_read=11416 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999623  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.10 cputime=2033.533 memavail=3580660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79575.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6982 bytes_read=11582 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999611  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2033.559 memavail=3580548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79576.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6988 bytes_read=11748 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999598  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2033.585 memavail=3580188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79577.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6994 bytes_read=11914 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999590  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2033.612 memavail=3580332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79578.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7000 bytes_read=12080 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999582  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2033.638 memavail=3580380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79579.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7006 bytes_read=12260 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999581  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2033.664 memavail=3580260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79580.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7018 bytes_read=12457 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999571  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2033.690 memavail=3580260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79581.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7024 bytes_read=12608 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999568  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2033.714 memavail=3580260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79582.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7030 bytes_read=12774 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999561  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2033.742 memavail=3580260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79583.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7036 bytes_read=12955 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999559  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2033.768 memavail=3580260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79584.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7042 bytes_read=13120 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999553  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2033.794 memavail=3580260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79585.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7048 bytes_read=13286 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999546  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2033.821 memavail=3580260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79586.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7054 bytes_read=13467 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999538  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.08 cputime=2033.849 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79587.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7060 bytes_read=13618 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999533  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2033.876 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79588.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7066 bytes_read=13784 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.08 cputime=2033.903 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79589.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7072 bytes_read=13979 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2033.930 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79590.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7078 bytes_read=14130 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2033.957 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79591.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7084 bytes_read=14287 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2033.982 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79592.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7090 bytes_read=14459 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2034.008 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79593.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7096 bytes_read=14610 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.07 cputime=2034.034 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79594.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7102 bytes_read=14790 bytes_retransmit=9 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2034.060 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 79595.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7108 bytes_read=14971 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2034.085 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79596.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7114 bytes_read=15122 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999630  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2034.110 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79597.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7120 bytes_read=15288 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999615  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2034.136 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79598.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7126 bytes_read=15469 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999600  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2034.160 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79599.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7132 bytes_read=15634 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999587  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.07 cputime=2034.185 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79600.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7138 bytes_read=15800 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999573  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.06 cputime=2034.210 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79601.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7144 bytes_read=15981 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999562  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.06 cputime=2034.234 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79602.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7150 bytes_read=16132 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999553  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.06 cputime=2034.258 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 79603.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7156 bytes_read=16298 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999544  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.06 cputime=2034.284 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80077.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=10829 bytes_read=96280 bytes_retransmit=9 bytes_invalid=0 send_seq=894 receive_seq=894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.02 cputime=2045.995 memavail=3581388 print_time=534.424 buffer_time=0.380 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 3044244256: Disconnected
Restarting printer
Start printer at Sun Sep 18 06:29:33 2022 (1663504173.4 80079.4)
===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 54.586
pid_ki = 0.556
pid_kd = 1340.771

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 80
target_temp = 35.0
control = watermark
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
webhooks client 3044896120: New connection
webhooks client 3044896120: Client info {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
Loaded MCU 'mcu' 105 commands (v0.10.0-563-g354915d2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 15.0)    | (40.0, 40.0)
  1   | (107.5, 15.0)   | (107.5, 40.0)
  2   | (175.0, 15.0)   | (175.0, 40.0)
  3   | (242.5, 15.0)   | (242.5, 40.0)
  4   | (310.0, 15.0)   | (310.0, 40.0)
  5   | (310.0, 82.5)   | (310.0, 107.5)
  6   | (242.5, 82.5)   | (242.5, 107.5)
  7   | (175.0, 82.5)   | (175.0, 107.5)
  8   | (107.5, 82.5)   | (107.5, 107.5)
  9   | (40.0, 82.5)    | (40.0, 107.5)
  10  | (40.0, 150.0)   | (40.0, 175.0)
  11  | (107.5, 150.0)  | (107.5, 175.0)
  12  | (175.0, 150.0)  | (175.0, 175.0)
  13  | (242.5, 150.0)  | (242.5, 175.0)
  14  | (310.0, 150.0)  | (310.0, 175.0)
  15  | (310.0, 217.5)  | (310.0, 242.5)
  16  | (242.5, 217.5)  | (242.5, 242.5)
  17  | (175.0, 217.5)  | (175.0, 242.5)
  18  | (107.5, 217.5)  | (107.5, 242.5)
  19  | (40.0, 217.5)   | (40.0, 242.5)
  20  | (40.0, 285.0)   | (40.0, 310.0)
  21  | (107.5, 285.0)  | (107.5, 310.0)
  22  | (175.0, 285.0)  | (175.0, 310.0)
  23  | (242.5, 285.0)  | (242.5, 310.0)
  24  | (310.0, 285.0)  | (310.0, 310.0)
bed_mesh: relative_reference_index 12 is (175.00, 175.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 80082.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3324 bytes_read=6468 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3022 freq=180003988  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.10 cputime=2048.230 memavail=3581688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 3044896120
webhooks: registering remote method 'reboot_machine' for connection id: 3044896120
webhooks: registering remote method 'pause_job_queue' for connection id: 3044896120
webhooks: registering remote method 'start_job_queue' for connection id: 3044896120
webhooks: registering remote method 'timelapse_newframe' for connection id: 3044896120
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 3044896120
webhooks: registering remote method 'timelapse_render' for connection id: 3044896120
Stats 80083.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6650 bytes_read=6879 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180003189  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2048.322 memavail=3581064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80084.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6840 bytes_read=7050 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000100  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2048.398 memavail=3580180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80085.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6846 bytes_read=7248 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000195  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2048.425 memavail=3580092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80086.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6852 bytes_read=7414 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000243  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.09 cputime=2048.450 memavail=3580124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80087.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6858 bytes_read=7565 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000431  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.09 cputime=2048.474 memavail=3581172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80088.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6864 bytes_read=7746 bytes_retransmit=9 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000267  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.09 cputime=2048.499 memavail=3581092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80089.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6870 bytes_read=7912 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000365  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2048.525 memavail=3581100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80090.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6876 bytes_read=8077 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000218  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2048.550 memavail=3581108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80091.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6882 bytes_read=8258 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000082  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.16 cputime=2048.575 memavail=3581116 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80092.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6888 bytes_read=8424 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999980  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.16 cputime=2048.601 memavail=3581180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80093.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6894 bytes_read=8575 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999897  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.16 cputime=2048.626 memavail=3581184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80094.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6900 bytes_read=8756 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999822  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.16 cputime=2048.651 memavail=3581192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80095.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6906 bytes_read=8936 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999776  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.16 cputime=2048.677 memavail=3581192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80096.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6912 bytes_read=9102 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999728  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2048.704 memavail=3581192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80097.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6918 bytes_read=9268 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999717  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2048.730 memavail=3581116 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 80098.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6924 bytes_read=9434 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999689  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2048.759 memavail=3581152 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80099.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6930 bytes_read=9600 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999661  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.15 cputime=2048.785 memavail=3581188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80100.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6936 bytes_read=9780 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999768  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.15 cputime=2048.811 memavail=3581192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 80101.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6942 bytes_read=9946 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999729  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.14 cputime=2048.835 memavail=3581212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80102.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6948 bytes_read=10112 bytes_retransmit=9 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999697  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.14 cputime=2048.860 memavail=3581216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80103.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6954 bytes_read=10272 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999678  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.14 cputime=2048.886 memavail=3581232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80104.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6960 bytes_read=10428 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999656  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2048.911 memavail=3581236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 80105.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6966 bytes_read=10607 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999635  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2048.937 memavail=3581236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 80106.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6972 bytes_read=10773 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999625  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2048.962 memavail=3581252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80107.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6978 bytes_read=10939 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999618  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.13 cputime=2048.987 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80108.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6984 bytes_read=11105 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999612  heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.13 cputime=2049.015 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80109.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6990 bytes_read=11271 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999600  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2049.040 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80110.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6996 bytes_read=11451 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999587  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.13 cputime=2049.068 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80111.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7002 bytes_read=11617 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999585  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.12 cputime=2049.094 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80112.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7008 bytes_read=11783 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999602  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2049.120 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 80113.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7014 bytes_read=11949 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999592  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2049.147 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80114.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7020 bytes_read=12115 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999582  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2049.174 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80115.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7140 bytes_read=12332 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999564  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.12 cputime=2049.205 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80116.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7146 bytes_read=12498 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999556  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.11 cputime=2049.233 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80117.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7152 bytes_read=12664 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999558  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.11 cputime=2049.260 memavail=3581012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80118.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7158 bytes_read=12830 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999553  heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.11 cputime=2049.286 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80119.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7164 bytes_read=12996 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999541  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.11 cputime=2049.310 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80120.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7170 bytes_read=13177 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999535  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.11 cputime=2049.336 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80121.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7176 bytes_read=13343 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.10 cputime=2049.363 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80122.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7182 bytes_read=13509 bytes_retransmit=9 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.10 cputime=2049.389 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80123.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7188 bytes_read=13675 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2049.417 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80124.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7194 bytes_read=13841 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.10 cputime=2049.444 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80125.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7200 bytes_read=14021 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999528  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.10 cputime=2049.472 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80126.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7206 bytes_read=14187 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2049.498 memavail=3581028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80127.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7212 bytes_read=14343 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.09 cputime=2049.527 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80128.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7218 bytes_read=14501 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2049.556 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80129.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7224 bytes_read=14667 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.09 cputime=2049.583 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80130.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7230 bytes_read=14847 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.09 cputime=2049.612 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80131.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7236 bytes_read=15013 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.08 cputime=2049.640 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80132.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7242 bytes_read=15179 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2049.668 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80133.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7248 bytes_read=15345 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2049.696 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80134.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7254 bytes_read=15511 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999502  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2049.724 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80135.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7260 bytes_read=15691 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.08 cputime=2049.753 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 80136.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7266 bytes_read=15857 bytes_retransmit=9 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.24 cputime=2049.782 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80137.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7272 bytes_read=16023 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999490  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.24 cputime=2049.810 memavail=3580692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80138.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7278 bytes_read=16189 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999485  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.24 cputime=2049.838 memavail=3580692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 80139.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7284 bytes_read=16355 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999482  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.24 cputime=2049.867 memavail=3580808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81015.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=25156 bytes_read=166125 bytes_retransmit=9 bytes_invalid=0 send_seq=1742 receive_seq=1742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.06 cputime=2072.449 memavail=3584456 print_time=935.640 buffer_time=0.194 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 3044896120: Disconnected
Restarting printer
Start printer at Sun Sep 18 06:45:10 2022 (1663505110.4 81016.5)
===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 54.586
pid_ki = 0.556
pid_kd = 1340.771

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 80
target_temp = 35.0
control = pid
hardware_pwm = true
pid_kp = 40.0
pid_ki = 5.0
pid_kd = 0.01
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
description = Set the chamber target temperature.
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
webhooks client 3041745336: New connection
webhooks client 3041745336: Client info {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
Loaded MCU 'mcu' 105 commands (v0.10.0-563-g354915d2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 15.0)    | (40.0, 40.0)
  1   | (107.5, 15.0)   | (107.5, 40.0)
  2   | (175.0, 15.0)   | (175.0, 40.0)
  3   | (242.5, 15.0)   | (242.5, 40.0)
  4   | (310.0, 15.0)   | (310.0, 40.0)
  5   | (310.0, 82.5)   | (310.0, 107.5)
  6   | (242.5, 82.5)   | (242.5, 107.5)
  7   | (175.0, 82.5)   | (175.0, 107.5)
  8   | (107.5, 82.5)   | (107.5, 107.5)
  9   | (40.0, 82.5)    | (40.0, 107.5)
  10  | (40.0, 150.0)   | (40.0, 175.0)
  11  | (107.5, 150.0)  | (107.5, 175.0)
  12  | (175.0, 150.0)  | (175.0, 175.0)
  13  | (242.5, 150.0)  | (242.5, 175.0)
  14  | (310.0, 150.0)  | (310.0, 175.0)
  15  | (310.0, 217.5)  | (310.0, 242.5)
  16  | (242.5, 217.5)  | (242.5, 242.5)
  17  | (175.0, 217.5)  | (175.0, 242.5)
  18  | (107.5, 217.5)  | (107.5, 242.5)
  19  | (40.0, 217.5)   | (40.0, 242.5)
  20  | (40.0, 285.0)   | (40.0, 310.0)
  21  | (107.5, 285.0)  | (107.5, 310.0)
  22  | (175.0, 285.0)  | (175.0, 310.0)
  23  | (242.5, 285.0)  | (242.5, 310.0)
  24  | (310.0, 285.0)  | (310.0, 310.0)
bed_mesh: relative_reference_index 12 is (175.00, 175.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 81019.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3294 bytes_read=6448 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3022 freq=180000176  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.14 cputime=2074.608 memavail=3581404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 3041745336
webhooks: registering remote method 'reboot_machine' for connection id: 3041745336
webhooks: registering remote method 'pause_job_queue' for connection id: 3041745336
webhooks: registering remote method 'start_job_queue' for connection id: 3041745336
webhooks: registering remote method 'timelapse_newframe' for connection id: 3041745336
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 3041745336
webhooks: registering remote method 'timelapse_render' for connection id: 3041745336
Stats 81020.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6779 bytes_read=6859 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=333 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=180002011  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2074.695 memavail=3581384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81021.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6832 bytes_read=7035 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001256  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2074.732 memavail=3583004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81022.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6838 bytes_read=7218 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000876  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2074.759 memavail=3583004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81023.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6844 bytes_read=7384 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000621  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2074.784 memavail=3583064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81024.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6850 bytes_read=7550 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000420  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2074.809 memavail=3583012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81025.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6910 bytes_read=7726 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000350  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2074.835 memavail=3583144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81026.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6970 bytes_read=7902 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000636  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.13 cputime=2074.862 memavail=3583204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81027.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=6976 bytes_read=8083 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2074.887 memavail=3583168 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81028.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=6982 bytes_read=8249 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000987  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2074.911 memavail=3583144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 81029.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=6988 bytes_read=8415 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000645  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2074.935 memavail=3583112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81030.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=6994 bytes_read=8581 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000402  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2074.961 memavail=3583140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81031.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=7054 bytes_read=8757 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000225  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2074.988 memavail=3583200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81032.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=7114 bytes_read=8948 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000092  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2075.016 memavail=3583108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81033.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=7120 bytes_read=9114 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000008  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.11 cputime=2075.042 memavail=3583312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81034.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=7126 bytes_read=9280 bytes_retransmit=9 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999933  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.11 cputime=2075.068 memavail=3583280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81035.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=7132 bytes_read=9446 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999876  heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.11 cputime=2075.095 memavail=3583180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81036.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=7138 bytes_read=9612 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999819  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.11 cputime=2075.121 memavail=3583000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81037.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7144 bytes_read=9792 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999772  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.11 cputime=2075.149 memavail=3582884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81038.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7258 bytes_read=9978 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999743  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.18 cputime=2075.179 memavail=3582552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81039.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7264 bytes_read=10144 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999807  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.18 cputime=2075.206 memavail=3582560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81040.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7378 bytes_read=10325 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999764  heater_bed: target=0 temp=19.1 pwm=0.000 sysload=0.18 cputime=2075.237 memavail=3582560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81041.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7384 bytes_read=10480 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999732  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.18 cputime=2075.264 memavail=3582580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81042.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7390 bytes_read=10660 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999711  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.18 cputime=2075.291 memavail=3582584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 81043.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7450 bytes_read=10836 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999682  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.16 cputime=2075.318 memavail=3582592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81044.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7510 bytes_read=11012 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999664  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.16 cputime=2075.345 memavail=3582592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81045.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7624 bytes_read=11198 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999655  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.16 cputime=2075.373 memavail=3582608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81046.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7630 bytes_read=11364 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999641  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.16 cputime=2075.399 memavail=3582628 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81047.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=7636 bytes_read=11545 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999622  heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.16 cputime=2075.425 memavail=3582628 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81048.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=7642 bytes_read=11711 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999629  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2075.447 memavail=3582640 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81049.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=7648 bytes_read=11877 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999628  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2075.472 memavail=3582648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81050.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=7654 bytes_read=12043 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999615  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2075.497 memavail=3582648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81051.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=7660 bytes_read=12209 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999603  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2075.524 memavail=3582648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81052.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7666 bytes_read=12389 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999601  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.15 cputime=2075.550 memavail=3582536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81053.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7678 bytes_read=12571 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999574  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2075.577 memavail=3582416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81054.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7738 bytes_read=12747 bytes_retransmit=9 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999584  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2075.605 memavail=3582304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81055.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7798 bytes_read=12923 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999577  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2075.632 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81056.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7804 bytes_read=13089 bytes_retransmit=9 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999565  heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.14 cputime=2075.654 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81057.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=7864 bytes_read=13280 bytes_retransmit=9 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999555  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.14 cputime=2075.682 memavail=3582076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81058.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=7924 bytes_read=13456 bytes_retransmit=9 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999562  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2075.709 memavail=3582004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81059.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=7930 bytes_read=13622 bytes_retransmit=9 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999553  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2075.736 memavail=3581884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81060.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=8044 bytes_read=13808 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999551  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2075.764 memavail=3581764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81061.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=8050 bytes_read=13974 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999548  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.13 cputime=2075.790 memavail=3581796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81062.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=8110 bytes_read=14165 bytes_retransmit=9 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999544  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.13 cputime=2075.817 memavail=3581684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81063.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=8170 bytes_read=14341 bytes_retransmit=9 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999542  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2075.844 memavail=3581712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81064.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=8284 bytes_read=14518 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999534  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2075.873 memavail=3581712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81065.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=8290 bytes_read=14675 bytes_retransmit=9 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999541  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2075.898 memavail=3581720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81066.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=8404 bytes_read=14861 bytes_retransmit=9 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999539  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2075.927 memavail=3581728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81067.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=8410 bytes_read=15042 bytes_retransmit=9 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.12 cputime=2075.953 memavail=3581728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81068.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=8470 bytes_read=15218 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.11 cputime=2075.977 memavail=3581480 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81069.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=8530 bytes_read=15394 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.11 cputime=2076.006 memavail=3581504 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81070.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=8536 bytes_read=15560 bytes_retransmit=9 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.11 cputime=2076.031 memavail=3581512 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81071.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=8542 bytes_read=15726 bytes_retransmit=9 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.11 cputime=2076.057 memavail=3581516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81072.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8548 bytes_read=15907 bytes_retransmit=9 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.11 cputime=2076.082 memavail=3581532 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 81073.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8554 bytes_read=16073 bytes_retransmit=9 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999503  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2076.108 memavail=3581540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81074.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8560 bytes_read=16239 bytes_retransmit=9 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999502  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2076.134 memavail=3581544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81075.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8669 bytes_read=16420 bytes_retransmit=9 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2076.162 memavail=3581556 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81076.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8773 bytes_read=16596 bytes_retransmit=9 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999493  heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.10 cputime=2076.189 memavail=3581572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 81881.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51946 bytes_read=159264 bytes_retransmit=9 bytes_invalid=0 send_seq=2668 receive_seq=2668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=179999418  heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.03 cputime=2097.538 memavail=3582976 print_time=865.253 buffer_time=0.626 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 3041745336: Disconnected
Restarting printer
Start printer at Sun Sep 18 06:59:37 2022 (1663505977.1 81883.2)
===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 54.586
pid_ki = 0.556
pid_kd = 1340.771

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 80
target_temp = 35.0
control = !pid
hardware_pwm = true
pid_kp = 40.0
pid_ki = 5.0
pid_kd = 0.01
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
description = Set the chamber target temperature.
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/pi/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/pi/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/pi/klipper/klippy/extras/temperature_fan.py", line 185, in load_config_prefix
    return TemperatureFan(config)
  File "/home/pi/klipper/klippy/extras/temperature_fan.py", line 39, in __init__
    algo = config.getchoice('control', algos)
  File "/home/pi/klipper/klippy/configfile.py", line 78, in getchoice
    " is not a valid choice" % (c, option, self.section))
Error: Choice '!pid' for option 'control' in section 'temperature_fan chamber' is not a valid choice
webhooks client 3042403432: New connection
webhooks client 3042403432: Client info {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
Unable to issue reset command on MCU 'mcu'
webhooks client 3042403432: Disconnected
Restarting printer
Start printer at Sun Sep 18 07:01:33 2022 (1663506093.9 82000.0)
===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 54.586
pid_ki = 0.556
pid_kd = 1340.771

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 80
target_temp = 35.0
control = pid
hardware_pwm = true
pid_kp = 40.0
pid_ki = 5.0
pid_kd = 0.01
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
description = Set the chamber target temperature.
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
webhooks client 3042242072: New connection
webhooks client 3042242072: Client info {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
Loaded MCU 'mcu' 105 commands (v0.10.0-563-g354915d2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 15.0)    | (40.0, 40.0)
  1   | (107.5, 15.0)   | (107.5, 40.0)
  2   | (175.0, 15.0)   | (175.0, 40.0)
  3   | (242.5, 15.0)   | (242.5, 40.0)
  4   | (310.0, 15.0)   | (310.0, 40.0)
  5   | (310.0, 82.5)   | (310.0, 107.5)
  6   | (242.5, 82.5)   | (242.5, 107.5)
  7   | (175.0, 82.5)   | (175.0, 107.5)
  8   | (107.5, 82.5)   | (107.5, 107.5)
  9   | (40.0, 82.5)    | (40.0, 107.5)
  10  | (40.0, 150.0)   | (40.0, 175.0)
  11  | (107.5, 150.0)  | (107.5, 175.0)
  12  | (175.0, 150.0)  | (175.0, 175.0)
  13  | (242.5, 150.0)  | (242.5, 175.0)
  14  | (310.0, 150.0)  | (310.0, 175.0)
  15  | (310.0, 217.5)  | (310.0, 242.5)
  16  | (242.5, 217.5)  | (242.5, 242.5)
  17  | (175.0, 217.5)  | (175.0, 242.5)
  18  | (107.5, 217.5)  | (107.5, 242.5)
  19  | (40.0, 217.5)   | (40.0, 242.5)
  20  | (40.0, 285.0)   | (40.0, 310.0)
  21  | (107.5, 285.0)  | (107.5, 310.0)
  22  | (175.0, 285.0)  | (175.0, 310.0)
  23  | (242.5, 285.0)  | (242.5, 310.0)
  24  | (310.0, 285.0)  | (310.0, 310.0)
bed_mesh: relative_reference_index 12 is (175.00, 175.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 3042242072
webhooks: registering remote method 'reboot_machine' for connection id: 3042242072
webhooks: registering remote method 'pause_job_queue' for connection id: 3042242072
webhooks: registering remote method 'start_job_queue' for connection id: 3042242072
webhooks: registering remote method 'timelapse_newframe' for connection id: 3042242072
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 3042242072
webhooks: registering remote method 'timelapse_render' for connection id: 3042242072
Stats 82804.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=13116 bytes_read=141842 bytes_retransmit=9 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=80 temp=18.7 pwm=0.700 sysload=0.00 cputime=2122.231 memavail=3584208 print_time=920.773 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Heater heater_bed approaching new target of 80.000
Stats 82805.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=13176 bytes_read=142023 bytes_retransmit=9 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=80 temp=18.7 pwm=0.700 sysload=0.00 cputime=2122.261 memavail=3584004 print_time=921.774 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82806.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=13220 bytes_read=142184 bytes_retransmit=9 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=80 temp=18.7 pwm=0.700 sysload=0.00 cputime=2122.290 memavail=3583888 print_time=922.775 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82807.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=13264 bytes_read=142390 bytes_retransmit=9 bytes_invalid=0 send_seq=1199 receive_seq=1199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=80 temp=18.7 pwm=0.700 sysload=0.00 cputime=2122.320 memavail=3583776 print_time=923.775 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82808.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=13324 bytes_read=142571 bytes_retransmit=9 bytes_invalid=0 send_seq=1203 receive_seq=1203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=80 temp=18.8 pwm=0.700 sysload=0.00 cputime=2122.351 memavail=3583936 print_time=924.776 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82809.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=13368 bytes_read=142732 bytes_retransmit=9 bytes_invalid=0 send_seq=1206 receive_seq=1206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=80 temp=18.9 pwm=0.700 sysload=0.00 cputime=2122.381 memavail=3583696 print_time=925.777 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82810.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=13412 bytes_read=142923 bytes_retransmit=9 bytes_invalid=0 send_seq=1209 receive_seq=1209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=80 temp=19.0 pwm=0.700 sysload=0.00 cputime=2122.409 memavail=3583724 print_time=926.777 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82811.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=13456 bytes_read=143099 bytes_retransmit=9 bytes_invalid=0 send_seq=1212 receive_seq=1212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=80 temp=19.1 pwm=0.700 sysload=0.00 cputime=2122.439 memavail=3583608 print_time=927.778 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82812.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13500 bytes_read=143275 bytes_retransmit=9 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999416  heater_bed: target=80 temp=19.1 pwm=0.700 sysload=0.00 cputime=2122.468 memavail=3583608 print_time=928.779 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82813.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13560 bytes_read=143469 bytes_retransmit=9 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=80 temp=19.1 pwm=0.700 sysload=0.00 cputime=2122.498 memavail=3583532 print_time=929.779 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82814.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13604 bytes_read=143634 bytes_retransmit=9 bytes_invalid=0 send_seq=1222 receive_seq=1222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999412  heater_bed: target=80 temp=19.3 pwm=0.700 sysload=0.00 cputime=2122.526 memavail=3583688 print_time=930.780 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82815.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13648 bytes_read=143806 bytes_retransmit=9 bytes_invalid=0 send_seq=1225 receive_seq=1225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=80 temp=19.4 pwm=0.700 sysload=0.00 cputime=2122.557 memavail=3583516 print_time=931.781 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82816.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=13692 bytes_read=143982 bytes_retransmit=9 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999410  heater_bed: target=80 temp=19.6 pwm=0.700 sysload=0.00 cputime=2122.588 memavail=3583404 print_time=932.781 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82817.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13815 bytes_read=144183 bytes_retransmit=9 bytes_invalid=0 send_seq=1233 receive_seq=1233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999410  heater_bed: target=80 temp=19.6 pwm=0.700 sysload=0.00 cputime=2122.620 memavail=3583532 print_time=933.782 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82818.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13854 bytes_read=144354 bytes_retransmit=9 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999407  heater_bed: target=80 temp=19.7 pwm=0.700 sysload=0.00 cputime=2122.650 memavail=3583416 print_time=934.782 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82819.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13898 bytes_read=144530 bytes_retransmit=9 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=80 temp=19.7 pwm=0.700 sysload=0.00 cputime=2122.681 memavail=3583312 print_time=935.782 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82820.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=13942 bytes_read=144706 bytes_retransmit=9 bytes_invalid=0 send_seq=1241 receive_seq=1241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999413  heater_bed: target=80 temp=19.9 pwm=0.700 sysload=0.00 cputime=2122.709 memavail=3583364 print_time=936.783 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82821.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=14002 bytes_read=144887 bytes_retransmit=9 bytes_invalid=0 send_seq=1245 receive_seq=1245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999416  heater_bed: target=80 temp=20.1 pwm=0.700 sysload=0.00 cputime=2122.742 memavail=3583372 print_time=937.783 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82822.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=14046 bytes_read=145078 bytes_retransmit=9 bytes_invalid=0 send_seq=1248 receive_seq=1248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999415  heater_bed: target=80 temp=20.2 pwm=0.700 sysload=0.00 cputime=2122.773 memavail=3583376 print_time=938.784 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82823.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=14090 bytes_read=145254 bytes_retransmit=9 bytes_invalid=0 send_seq=1251 receive_seq=1251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999415  heater_bed: target=80 temp=20.4 pwm=0.700 sysload=0.00 cputime=2122.802 memavail=3583380 print_time=939.785 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82824.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=14134 bytes_read=145430 bytes_retransmit=9 bytes_invalid=0 send_seq=1254 receive_seq=1254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=80 temp=20.5 pwm=0.700 sysload=0.00 cputime=2122.832 memavail=3583388 print_time=940.786 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82825.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=14194 bytes_read=145611 bytes_retransmit=9 bytes_invalid=0 send_seq=1258 receive_seq=1258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999413  heater_bed: target=80 temp=20.6 pwm=0.700 sysload=0.00 cputime=2122.862 memavail=3583404 print_time=941.786 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82826.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=14287 bytes_read=145792 bytes_retransmit=9 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999416  heater_bed: target=80 temp=20.7 pwm=0.700 sysload=0.00 cputime=2122.893 memavail=3583408 print_time=942.787 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82827.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=14331 bytes_read=145983 bytes_retransmit=9 bytes_invalid=0 send_seq=1265 receive_seq=1265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999415  heater_bed: target=80 temp=20.7 pwm=0.700 sysload=0.00 cputime=2122.923 memavail=3583440 print_time=943.787 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82828.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=14375 bytes_read=146159 bytes_retransmit=9 bytes_invalid=0 send_seq=1268 receive_seq=1268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=80 temp=20.8 pwm=0.700 sysload=0.00 cputime=2122.951 memavail=3583536 print_time=944.788 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82829.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=14435 bytes_read=146340 bytes_retransmit=9 bytes_invalid=0 send_seq=1272 receive_seq=1272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=80 temp=21.0 pwm=0.700 sysload=0.00 cputime=2122.980 memavail=3583620 print_time=945.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82830.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=14485 bytes_read=146532 bytes_retransmit=9 bytes_invalid=0 send_seq=1276 receive_seq=1276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999413  heater_bed: target=80 temp=21.2 pwm=0.700 sysload=0.00 cputime=2123.007 memavail=3583672 print_time=946.790 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82831.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=14529 bytes_read=146708 bytes_retransmit=9 bytes_invalid=0 send_seq=1279 receive_seq=1279 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999412  heater_bed: target=80 temp=21.4 pwm=0.700 sysload=0.00 cputime=2123.037 memavail=3583676 print_time=947.791 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82832.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=14573 bytes_read=146899 bytes_retransmit=9 bytes_invalid=0 send_seq=1282 receive_seq=1282 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999412  heater_bed: target=80 temp=21.5 pwm=0.700 sysload=0.00 cputime=2123.067 memavail=3583768 print_time=948.792 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82833.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=14671 bytes_read=147085 bytes_retransmit=9 bytes_invalid=0 send_seq=1287 receive_seq=1287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=179999413  heater_bed: target=80 temp=21.6 pwm=0.700 sysload=0.00 cputime=2123.099 memavail=3583912 print_time=949.792 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82834.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=14731 bytes_read=147266 bytes_retransmit=9 bytes_invalid=0 send_seq=1291 receive_seq=1291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999412  heater_bed: target=80 temp=21.6 pwm=0.700 sysload=0.00 cputime=2123.128 memavail=3583884 print_time=950.793 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82835.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=14775 bytes_read=147442 bytes_retransmit=9 bytes_invalid=0 send_seq=1294 receive_seq=1294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999412  heater_bed: target=80 temp=21.9 pwm=0.700 sysload=0.00 cputime=2123.158 memavail=3584064 print_time=951.793 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82836.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=14819 bytes_read=147618 bytes_retransmit=9 bytes_invalid=0 send_seq=1297 receive_seq=1297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999413  heater_bed: target=80 temp=22.0 pwm=0.700 sysload=0.00 cputime=2123.188 memavail=3584080 print_time=952.794 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82837.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=14863 bytes_read=147806 bytes_retransmit=9 bytes_invalid=0 send_seq=1300 receive_seq=1300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999413  heater_bed: target=80 temp=22.1 pwm=0.700 sysload=0.00 cputime=2123.219 memavail=3584168 print_time=953.795 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82838.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=14918 bytes_read=147971 bytes_retransmit=9 bytes_invalid=0 send_seq=1303 receive_seq=1303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=80 temp=22.3 pwm=0.700 sysload=0.00 cputime=2123.251 memavail=3584328 print_time=954.796 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82839.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=14962 bytes_read=148145 bytes_retransmit=9 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999425  heater_bed: target=80 temp=22.4 pwm=0.700 sysload=0.00 cputime=2123.283 memavail=3584236 print_time=955.798 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82840.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=15006 bytes_read=148321 bytes_retransmit=9 bytes_invalid=0 send_seq=1309 receive_seq=1309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999424  heater_bed: target=80 temp=22.6 pwm=0.700 sysload=0.00 cputime=2123.312 memavail=3584364 print_time=956.801 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82841.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=15097 bytes_read=148502 bytes_retransmit=9 bytes_invalid=0 send_seq=1313 receive_seq=1313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999421  heater_bed: target=80 temp=22.6 pwm=0.700 sysload=0.00 cputime=2123.347 memavail=3584364 print_time=957.800 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82842.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=15157 bytes_read=148698 bytes_retransmit=9 bytes_invalid=0 send_seq=1317 receive_seq=1317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=80 temp=22.9 pwm=0.700 sysload=0.00 cputime=2123.380 memavail=3584364 print_time=958.800 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82843.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=15196 bytes_read=148869 bytes_retransmit=9 bytes_invalid=0 send_seq=1319 receive_seq=1319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=80 temp=23.0 pwm=0.700 sysload=0.00 cputime=2123.410 memavail=3584364 print_time=959.801 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82844.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=15240 bytes_read=149045 bytes_retransmit=9 bytes_invalid=0 send_seq=1322 receive_seq=1322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=80 temp=23.2 pwm=0.700 sysload=0.00 cputime=2123.440 memavail=3584364 print_time=960.802 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82845.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=15284 bytes_read=149221 bytes_retransmit=9 bytes_invalid=0 send_seq=1325 receive_seq=1325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=80 temp=23.3 pwm=0.700 sysload=0.00 cputime=2123.469 memavail=3584364 print_time=961.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82846.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=15344 bytes_read=149402 bytes_retransmit=9 bytes_invalid=0 send_seq=1329 receive_seq=1329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999426  heater_bed: target=80 temp=23.5 pwm=0.700 sysload=0.00 cputime=2123.500 memavail=3584364 print_time=962.804 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82847.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=15383 bytes_read=149588 bytes_retransmit=9 bytes_invalid=0 send_seq=1331 receive_seq=1331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999423  heater_bed: target=80 temp=23.6 pwm=0.700 sysload=0.00 cputime=2123.531 memavail=3584364 print_time=963.805 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82848.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=15476 bytes_read=149769 bytes_retransmit=9 bytes_invalid=0 send_seq=1335 receive_seq=1335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=80 temp=23.8 pwm=0.700 sysload=0.00 cputime=2123.563 memavail=3584364 print_time=964.806 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82849.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=15520 bytes_read=149945 bytes_retransmit=9 bytes_invalid=0 send_seq=1338 receive_seq=1338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=80 temp=24.0 pwm=0.700 sysload=0.00 cputime=2123.591 memavail=3584364 print_time=965.806 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82850.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=15580 bytes_read=150126 bytes_retransmit=9 bytes_invalid=0 send_seq=1342 receive_seq=1342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999413  heater_bed: target=80 temp=24.1 pwm=0.700 sysload=0.00 cputime=2123.622 memavail=3584392 print_time=966.807 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82851.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=15624 bytes_read=150302 bytes_retransmit=9 bytes_invalid=0 send_seq=1345 receive_seq=1345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=80 temp=24.3 pwm=0.700 sysload=0.00 cputime=2123.651 memavail=3584392 print_time=967.808 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82852.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=15668 bytes_read=150493 bytes_retransmit=9 bytes_invalid=0 send_seq=1348 receive_seq=1348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999409  heater_bed: target=80 temp=24.4 pwm=0.700 sysload=0.00 cputime=2123.683 memavail=3584392 print_time=968.809 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82853.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=15712 bytes_read=150669 bytes_retransmit=9 bytes_invalid=0 send_seq=1351 receive_seq=1351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999405  heater_bed: target=80 temp=24.5 pwm=0.700 sysload=0.00 cputime=2123.715 memavail=3584392 print_time=969.810 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82854.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=15810 bytes_read=150855 bytes_retransmit=9 bytes_invalid=0 send_seq=1356 receive_seq=1356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=179999403  heater_bed: target=80 temp=24.8 pwm=0.700 sysload=0.00 cputime=2123.750 memavail=3584392 print_time=970.810 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82855.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=15870 bytes_read=151036 bytes_retransmit=9 bytes_invalid=0 send_seq=1360 receive_seq=1360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999399  heater_bed: target=80 temp=24.9 pwm=0.700 sysload=0.00 cputime=2123.782 memavail=3584392 print_time=971.811 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82856.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=15914 bytes_read=151212 bytes_retransmit=9 bytes_invalid=0 send_seq=1363 receive_seq=1363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999398  heater_bed: target=80 temp=25.0 pwm=0.700 sysload=0.00 cputime=2123.814 memavail=3584392 print_time=972.811 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82857.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=15958 bytes_read=151403 bytes_retransmit=9 bytes_invalid=0 send_seq=1366 receive_seq=1366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999396  heater_bed: target=80 temp=25.2 pwm=0.700 sysload=0.00 cputime=2123.846 memavail=3584392 print_time=973.812 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82858.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16002 bytes_read=151579 bytes_retransmit=9 bytes_invalid=0 send_seq=1369 receive_seq=1369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999394  heater_bed: target=80 temp=25.4 pwm=0.700 sysload=0.00 cputime=2123.875 memavail=3584392 print_time=974.813 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82859.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16062 bytes_read=151760 bytes_retransmit=9 bytes_invalid=0 send_seq=1373 receive_seq=1373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999393  heater_bed: target=80 temp=25.4 pwm=0.700 sysload=0.00 cputime=2123.908 memavail=3584268 print_time=975.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82860.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16155 bytes_read=151946 bytes_retransmit=9 bytes_invalid=0 send_seq=1378 receive_seq=1378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999393  heater_bed: target=80 temp=25.7 pwm=0.700 sysload=0.00 cputime=2123.943 memavail=3584280 print_time=976.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82861.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16199 bytes_read=152117 bytes_retransmit=9 bytes_invalid=0 send_seq=1381 receive_seq=1381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999392  heater_bed: target=80 temp=25.8 pwm=0.700 sysload=0.00 cputime=2123.974 memavail=3584288 print_time=977.815 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82862.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16243 bytes_read=152297 bytes_retransmit=9 bytes_invalid=0 send_seq=1384 receive_seq=1384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999390  heater_bed: target=80 temp=26.0 pwm=0.700 sysload=0.00 cputime=2124.006 memavail=3584288 print_time=978.816 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82863.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16303 bytes_read=152478 bytes_retransmit=9 bytes_invalid=0 send_seq=1388 receive_seq=1388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999389  heater_bed: target=80 temp=26.2 pwm=0.700 sysload=0.00 cputime=2124.039 memavail=3584288 print_time=979.816 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82864.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16401 bytes_read=152664 bytes_retransmit=9 bytes_invalid=0 send_seq=1393 receive_seq=1393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999388  heater_bed: target=80 temp=26.4 pwm=0.700 sysload=0.00 cputime=2124.072 memavail=3584288 print_time=980.817 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82865.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16445 bytes_read=152840 bytes_retransmit=9 bytes_invalid=0 send_seq=1396 receive_seq=1396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999386  heater_bed: target=80 temp=26.5 pwm=0.700 sysload=0.00 cputime=2124.104 memavail=3584288 print_time=981.818 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82866.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=16543 bytes_read=153026 bytes_retransmit=9 bytes_invalid=0 send_seq=1401 receive_seq=1401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999384  heater_bed: target=80 temp=26.6 pwm=0.700 sysload=0.00 cputime=2124.136 memavail=3584288 print_time=982.819 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82867.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=16603 bytes_read=153222 bytes_retransmit=9 bytes_invalid=0 send_seq=1405 receive_seq=1405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999383  heater_bed: target=80 temp=26.8 pwm=0.700 sysload=0.00 cputime=2124.169 memavail=3584288 print_time=983.819 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82868.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=16647 bytes_read=153398 bytes_retransmit=9 bytes_invalid=0 send_seq=1408 receive_seq=1408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999381  heater_bed: target=80 temp=27.0 pwm=0.700 sysload=0.00 cputime=2124.200 memavail=3584288 print_time=984.820 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82869.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=16691 bytes_read=153574 bytes_retransmit=9 bytes_invalid=0 send_seq=1411 receive_seq=1411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=80 temp=27.2 pwm=0.700 sysload=0.00 cputime=2124.231 memavail=3584288 print_time=985.821 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82870.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=16735 bytes_read=153765 bytes_retransmit=9 bytes_invalid=0 send_seq=1414 receive_seq=1414 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999377  heater_bed: target=80 temp=27.3 pwm=0.700 sysload=0.00 cputime=2124.262 memavail=3584164 print_time=986.822 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82871.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=16795 bytes_read=153931 bytes_retransmit=9 bytes_invalid=0 send_seq=1418 receive_seq=1418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999373  heater_bed: target=80 temp=27.4 pwm=0.700 sysload=0.00 cputime=2124.294 memavail=3584164 print_time=987.823 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82872.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=16839 bytes_read=154122 bytes_retransmit=9 bytes_invalid=0 send_seq=1421 receive_seq=1421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999372  heater_bed: target=80 temp=27.6 pwm=0.700 sysload=0.00 cputime=2124.326 memavail=3584164 print_time=988.824 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82873.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=16932 bytes_read=154318 bytes_retransmit=9 bytes_invalid=0 send_seq=1425 receive_seq=1425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999371  heater_bed: target=80 temp=27.8 pwm=0.700 sysload=0.00 cputime=2124.359 memavail=3584164 print_time=989.824 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82874.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=16976 bytes_read=154479 bytes_retransmit=9 bytes_invalid=0 send_seq=1428 receive_seq=1428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999371  heater_bed: target=80 temp=27.9 pwm=0.700 sysload=0.00 cputime=2124.390 memavail=3584164 print_time=990.825 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82875.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=17020 bytes_read=154655 bytes_retransmit=9 bytes_invalid=0 send_seq=1431 receive_seq=1431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=179999368  heater_bed: target=80 temp=28.1 pwm=0.700 sysload=0.00 cputime=2124.422 memavail=3584164 print_time=991.826 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82876.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=17075 bytes_read=154846 bytes_retransmit=9 bytes_invalid=0 send_seq=1434 receive_seq=1434 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999369  heater_bed: target=80 temp=28.2 pwm=0.700 sysload=0.00 cputime=2124.453 memavail=3584164 print_time=992.826 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82877.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=17119 bytes_read=155022 bytes_retransmit=9 bytes_invalid=0 send_seq=1437 receive_seq=1437 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999368  heater_bed: target=80 temp=28.4 pwm=0.700 sysload=0.00 cputime=2124.484 memavail=3584164 print_time=993.827 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82878.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=17163 bytes_read=155198 bytes_retransmit=9 bytes_invalid=0 send_seq=1440 receive_seq=1440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999367  heater_bed: target=80 temp=28.5 pwm=0.700 sysload=0.00 cputime=2124.516 memavail=3584164 print_time=994.828 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82879.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=17255 bytes_read=155399 bytes_retransmit=9 bytes_invalid=0 send_seq=1445 receive_seq=1445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999364  heater_bed: target=80 temp=28.7 pwm=0.700 sysload=0.00 cputime=2124.548 memavail=3584164 print_time=995.829 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82880.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=17310 bytes_read=155560 bytes_retransmit=9 bytes_invalid=0 send_seq=1448 receive_seq=1448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999361  heater_bed: target=80 temp=28.8 pwm=0.700 sysload=0.00 cputime=2124.581 memavail=3584208 print_time=996.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82881.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=17354 bytes_read=155736 bytes_retransmit=9 bytes_invalid=0 send_seq=1451 receive_seq=1451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999369  heater_bed: target=80 temp=29.0 pwm=0.700 sysload=0.00 cputime=2124.611 memavail=3584208 print_time=997.831 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82882.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=17398 bytes_read=155942 bytes_retransmit=9 bytes_invalid=0 send_seq=1454 receive_seq=1454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999365  heater_bed: target=80 temp=29.2 pwm=0.700 sysload=0.00 cputime=2124.643 memavail=3584208 print_time=998.832 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82883.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=17442 bytes_read=156103 bytes_retransmit=9 bytes_invalid=0 send_seq=1457 receive_seq=1457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999361  heater_bed: target=80 temp=29.3 pwm=0.700 sysload=0.00 cputime=2124.674 memavail=3584208 print_time=999.832 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82884.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=17502 bytes_read=156284 bytes_retransmit=9 bytes_invalid=0 send_seq=1461 receive_seq=1461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999360  heater_bed: target=80 temp=29.6 pwm=0.700 sysload=0.00 cputime=2124.708 memavail=3584208 print_time=1000.833 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82885.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=17612 bytes_read=156478 bytes_retransmit=9 bytes_invalid=0 send_seq=1466 receive_seq=1466 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999357  heater_bed: target=80 temp=29.7 pwm=0.700 sysload=0.00 cputime=2124.743 memavail=3584208 print_time=1001.834 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82886.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=17656 bytes_read=156630 bytes_retransmit=9 bytes_invalid=0 send_seq=1469 receive_seq=1469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999362  heater_bed: target=80 temp=29.8 pwm=0.700 sysload=0.00 cputime=2124.772 memavail=3584208 print_time=1002.834 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82887.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=17700 bytes_read=156820 bytes_retransmit=9 bytes_invalid=0 send_seq=1472 receive_seq=1472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999360  heater_bed: target=80 temp=30.0 pwm=0.700 sysload=0.00 cputime=2124.804 memavail=3584208 print_time=1003.835 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82888.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=17760 bytes_read=157016 bytes_retransmit=9 bytes_invalid=0 send_seq=1476 receive_seq=1476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999359  heater_bed: target=80 temp=30.2 pwm=0.700 sysload=0.00 cputime=2124.835 memavail=3584208 print_time=1004.836 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82889.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=17799 bytes_read=157172 bytes_retransmit=9 bytes_invalid=0 send_seq=1478 receive_seq=1478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999358  heater_bed: target=80 temp=30.4 pwm=0.700 sysload=0.00 cputime=2124.864 memavail=3584208 print_time=1005.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82890.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=17843 bytes_read=157348 bytes_retransmit=9 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999355  heater_bed: target=80 temp=30.6 pwm=0.700 sysload=0.00 cputime=2124.893 memavail=3584108 print_time=1006.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82891.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=17947 bytes_read=157565 bytes_retransmit=9 bytes_invalid=0 send_seq=1487 receive_seq=1487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999350  heater_bed: target=80 temp=30.6 pwm=0.700 sysload=0.00 cputime=2124.927 memavail=3584108 print_time=1007.838 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82892.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18007 bytes_read=157746 bytes_retransmit=9 bytes_invalid=0 send_seq=1491 receive_seq=1491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999367  heater_bed: target=80 temp=30.8 pwm=0.700 sysload=0.00 cputime=2124.958 memavail=3584228 print_time=1008.838 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82893.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18051 bytes_read=157922 bytes_retransmit=9 bytes_invalid=0 send_seq=1494 receive_seq=1494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999363  heater_bed: target=80 temp=31.0 pwm=0.700 sysload=0.00 cputime=2124.988 memavail=3584228 print_time=1009.839 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82894.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18095 bytes_read=158113 bytes_retransmit=9 bytes_invalid=0 send_seq=1497 receive_seq=1497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999359  heater_bed: target=80 temp=31.2 pwm=0.700 sysload=0.00 cputime=2125.018 memavail=3584228 print_time=1010.840 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82895.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18139 bytes_read=158274 bytes_retransmit=9 bytes_invalid=0 send_seq=1500 receive_seq=1500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999353  heater_bed: target=80 temp=31.3 pwm=0.700 sysload=0.00 cputime=2125.047 memavail=3584228 print_time=1011.841 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82896.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18199 bytes_read=158470 bytes_retransmit=9 bytes_invalid=0 send_seq=1504 receive_seq=1504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999351  heater_bed: target=80 temp=31.5 pwm=0.700 sysload=0.00 cputime=2125.077 memavail=3584228 print_time=1012.842 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82897.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=18243 bytes_read=158661 bytes_retransmit=9 bytes_invalid=0 send_seq=1507 receive_seq=1507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999347  heater_bed: target=80 temp=31.7 pwm=0.700 sysload=0.00 cputime=2125.107 memavail=3584228 print_time=1013.842 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82898.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=18336 bytes_read=158827 bytes_retransmit=9 bytes_invalid=0 send_seq=1511 receive_seq=1511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999341  heater_bed: target=80 temp=31.8 pwm=0.700 sysload=0.00 cputime=2125.138 memavail=3584228 print_time=1014.842 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82899.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=18380 bytes_read=159018 bytes_retransmit=9 bytes_invalid=0 send_seq=1514 receive_seq=1514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999337  heater_bed: target=80 temp=32.0 pwm=0.700 sysload=0.00 cputime=2125.168 memavail=3584236 print_time=1015.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82900.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=18424 bytes_read=159194 bytes_retransmit=9 bytes_invalid=0 send_seq=1517 receive_seq=1517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999333  heater_bed: target=80 temp=32.1 pwm=0.700 sysload=0.00 cputime=2125.199 memavail=3584140 print_time=1016.844 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82901.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=18484 bytes_read=159360 bytes_retransmit=9 bytes_invalid=0 send_seq=1521 receive_seq=1521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999331  heater_bed: target=80 temp=32.2 pwm=0.700 sysload=0.00 cputime=2125.230 memavail=3584140 print_time=1017.845 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82902.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18528 bytes_read=159566 bytes_retransmit=9 bytes_invalid=0 send_seq=1524 receive_seq=1524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999327  heater_bed: target=80 temp=32.5 pwm=0.700 sysload=0.00 cputime=2125.262 memavail=3584140 print_time=1018.845 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82903.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18572 bytes_read=159742 bytes_retransmit=9 bytes_invalid=0 send_seq=1527 receive_seq=1527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999323  heater_bed: target=80 temp=32.6 pwm=0.700 sysload=0.00 cputime=2125.293 memavail=3584140 print_time=1019.846 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82904.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18663 bytes_read=159908 bytes_retransmit=9 bytes_invalid=0 send_seq=1531 receive_seq=1531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999331  heater_bed: target=80 temp=32.7 pwm=0.700 sysload=0.00 cputime=2125.325 memavail=3584140 print_time=1020.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82905.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18723 bytes_read=160104 bytes_retransmit=9 bytes_invalid=0 send_seq=1535 receive_seq=1535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999327  heater_bed: target=80 temp=32.9 pwm=0.700 sysload=0.00 cputime=2125.358 memavail=3584140 print_time=1021.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82906.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18767 bytes_read=160280 bytes_retransmit=9 bytes_invalid=0 send_seq=1538 receive_seq=1538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999323  heater_bed: target=80 temp=33.1 pwm=0.700 sysload=0.00 cputime=2125.391 memavail=3584140 print_time=1022.849 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82907.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=18811 bytes_read=160456 bytes_retransmit=9 bytes_invalid=0 send_seq=1541 receive_seq=1541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999318  heater_bed: target=80 temp=33.2 pwm=0.700 sysload=0.00 cputime=2125.422 memavail=3584140 print_time=1023.849 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82908.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=18855 bytes_read=160647 bytes_retransmit=9 bytes_invalid=0 send_seq=1544 receive_seq=1544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999320  heater_bed: target=80 temp=33.4 pwm=0.700 sysload=0.00 cputime=2125.452 memavail=3584140 print_time=1024.850 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82909.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=18915 bytes_read=160818 bytes_retransmit=9 bytes_invalid=0 send_seq=1548 receive_seq=1548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999316  heater_bed: target=80 temp=33.5 pwm=0.700 sysload=0.00 cputime=2125.482 memavail=3584140 print_time=1025.850 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.8 pwm=0.000
Stats 82910.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=19062 bytes_read=160987 bytes_retransmit=9 bytes_invalid=0 send_seq=1554 receive_seq=1554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999310  heater_bed: target=80 temp=33.7 pwm=0.700 sysload=0.00 cputime=2125.516 memavail=3583396 print_time=1026.851 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82911.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=19155 bytes_read=161183 bytes_retransmit=9 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999307  heater_bed: target=80 temp=33.9 pwm=0.700 sysload=0.00 cputime=2125.548 memavail=3583396 print_time=1027.851 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82912.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=19297 bytes_read=161384 bytes_retransmit=9 bytes_invalid=0 send_seq=1563 receive_seq=1563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999303  heater_bed: target=80 temp=34.0 pwm=0.700 sysload=0.00 cputime=2125.580 memavail=3583396 print_time=1028.852 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82913.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=19357 bytes_read=161550 bytes_retransmit=9 bytes_invalid=0 send_seq=1567 receive_seq=1567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999301  heater_bed: target=80 temp=34.1 pwm=0.700 sysload=0.00 cputime=2125.614 memavail=3583396 print_time=1029.853 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.8 pwm=0.000
Stats 82914.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=19504 bytes_read=161756 bytes_retransmit=9 bytes_invalid=0 send_seq=1573 receive_seq=1573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999299  heater_bed: target=80 temp=34.3 pwm=0.700 sysload=0.00 cputime=2125.647 memavail=3583396 print_time=1030.854 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82915.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=19651 bytes_read=161947 bytes_retransmit=9 bytes_invalid=0 send_seq=1579 receive_seq=1579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999295  heater_bed: target=80 temp=34.5 pwm=0.700 sysload=0.00 cputime=2125.682 memavail=3583396 print_time=1031.854 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82916.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=19695 bytes_read=162108 bytes_retransmit=9 bytes_invalid=0 send_seq=1582 receive_seq=1582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999293  heater_bed: target=80 temp=34.6 pwm=0.700 sysload=0.00 cputime=2125.713 memavail=3583396 print_time=1032.855 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82917.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=19902 bytes_read=162334 bytes_retransmit=9 bytes_invalid=0 send_seq=1589 receive_seq=1589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999290  heater_bed: target=80 temp=34.7 pwm=0.700 sysload=0.00 cputime=2125.748 memavail=3583396 print_time=1033.855 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82918.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=19995 bytes_read=162515 bytes_retransmit=9 bytes_invalid=0 send_seq=1593 receive_seq=1593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999286  heater_bed: target=80 temp=34.9 pwm=0.700 sysload=0.00 cputime=2125.779 memavail=3583396 print_time=1034.856 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82919.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=20093 bytes_read=162686 bytes_retransmit=9 bytes_invalid=0 send_seq=1598 receive_seq=1598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999283  heater_bed: target=80 temp=35.1 pwm=0.700 sysload=0.00 cputime=2125.810 memavail=3583396 print_time=1035.857 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82920.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=20137 bytes_read=162877 bytes_retransmit=9 bytes_invalid=0 send_seq=1601 receive_seq=1601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999279  heater_bed: target=80 temp=35.2 pwm=0.700 sysload=0.00 cputime=2125.839 memavail=3583408 print_time=1036.857 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82921.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=20181 bytes_read=163053 bytes_retransmit=9 bytes_invalid=0 send_seq=1604 receive_seq=1604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999277  heater_bed: target=80 temp=35.4 pwm=0.700 sysload=0.00 cputime=2125.869 memavail=3583408 print_time=1037.858 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82922.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=20344 bytes_read=163249 bytes_retransmit=9 bytes_invalid=0 send_seq=1611 receive_seq=1611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999274  heater_bed: target=80 temp=35.5 pwm=0.700 sysload=0.00 cputime=2125.902 memavail=3583452 print_time=1038.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82923.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=20535 bytes_read=163460 bytes_retransmit=9 bytes_invalid=0 send_seq=1618 receive_seq=1618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999272  heater_bed: target=80 temp=35.7 pwm=0.700 sysload=0.00 cputime=2125.936 memavail=3583484 print_time=1039.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.9 pwm=0.000
Stats 82924.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=20633 bytes_read=163646 bytes_retransmit=9 bytes_invalid=0 send_seq=1623 receive_seq=1623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999269  heater_bed: target=80 temp=35.9 pwm=0.700 sysload=0.00 cputime=2125.967 memavail=3583640 print_time=1040.860 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82925.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=20677 bytes_read=163807 bytes_retransmit=9 bytes_invalid=0 send_seq=1626 receive_seq=1626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999266  heater_bed: target=80 temp=35.9 pwm=0.700 sysload=0.00 cputime=2125.996 memavail=3583644 print_time=1041.861 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82926.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=20737 bytes_read=164003 bytes_retransmit=9 bytes_invalid=0 send_seq=1630 receive_seq=1630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999263  heater_bed: target=80 temp=36.2 pwm=0.700 sysload=0.00 cputime=2126.028 memavail=3583648 print_time=1042.862 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82927.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=20781 bytes_read=164194 bytes_retransmit=9 bytes_invalid=0 send_seq=1633 receive_seq=1633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999260  heater_bed: target=80 temp=36.3 pwm=0.700 sysload=0.08 cputime=2126.059 memavail=3583864 print_time=1043.862 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82928.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=20879 bytes_read=164365 bytes_retransmit=9 bytes_invalid=0 send_seq=1638 receive_seq=1638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999257  heater_bed: target=80 temp=36.4 pwm=0.700 sysload=0.08 cputime=2126.089 memavail=3583960 print_time=1044.863 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82929.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=21026 bytes_read=164571 bytes_retransmit=9 bytes_invalid=0 send_seq=1644 receive_seq=1644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999255  heater_bed: target=80 temp=36.6 pwm=0.700 sysload=0.08 cputime=2126.121 memavail=3583952 print_time=1045.863 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82930.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=21233 bytes_read=164767 bytes_retransmit=9 bytes_invalid=0 send_seq=1651 receive_seq=1651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999259  heater_bed: target=80 temp=36.7 pwm=0.700 sysload=0.08 cputime=2126.155 memavail=3583996 print_time=1046.864 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82931.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=21326 bytes_read=164933 bytes_retransmit=9 bytes_invalid=0 send_seq=1655 receive_seq=1655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999255  heater_bed: target=80 temp=36.8 pwm=0.700 sysload=0.08 cputime=2126.185 memavail=3583840 print_time=1047.864 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82932.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=21419 bytes_read=165144 bytes_retransmit=9 bytes_invalid=0 send_seq=1659 receive_seq=1659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999252  heater_bed: target=80 temp=37.1 pwm=0.700 sysload=0.15 cputime=2126.216 memavail=3583888 print_time=1048.864 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82933.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=21512 bytes_read=165315 bytes_retransmit=9 bytes_invalid=0 send_seq=1663 receive_seq=1663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999248  heater_bed: target=80 temp=37.2 pwm=0.700 sysload=0.15 cputime=2126.247 memavail=3584064 print_time=1049.865 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82934.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=21621 bytes_read=165480 bytes_retransmit=9 bytes_invalid=0 send_seq=1668 receive_seq=1668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999243  heater_bed: target=80 temp=37.2 pwm=0.700 sysload=0.15 cputime=2126.277 memavail=3584176 print_time=1050.866 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82935.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=21709 bytes_read=165671 bytes_retransmit=9 bytes_invalid=0 send_seq=1671 receive_seq=1671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999238  heater_bed: target=80 temp=37.5 pwm=0.700 sysload=0.15 cputime=2126.309 memavail=3584308 print_time=1051.867 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82936.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=21856 bytes_read=165862 bytes_retransmit=9 bytes_invalid=0 send_seq=1677 receive_seq=1677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999236  heater_bed: target=80 temp=37.6 pwm=0.700 sysload=0.15 cputime=2126.340 memavail=3584220 print_time=1052.868 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82937.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=22047 bytes_read=166053 bytes_retransmit=9 bytes_invalid=0 send_seq=1683 receive_seq=1683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999234  heater_bed: target=80 temp=37.7 pwm=0.700 sysload=0.14 cputime=2126.371 memavail=3584276 print_time=1053.869 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82938.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=22156 bytes_read=166254 bytes_retransmit=9 bytes_invalid=0 send_seq=1688 receive_seq=1688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999232  heater_bed: target=80 temp=37.9 pwm=0.700 sysload=0.14 cputime=2126.404 memavail=3584336 print_time=1054.869 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82939.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=22303 bytes_read=166445 bytes_retransmit=9 bytes_invalid=0 send_seq=1694 receive_seq=1694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999230  heater_bed: target=80 temp=38.0 pwm=0.700 sysload=0.14 cputime=2126.436 memavail=3584580 print_time=1055.870 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82940.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=22347 bytes_read=166606 bytes_retransmit=9 bytes_invalid=0 send_seq=1697 receive_seq=1697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999228  heater_bed: target=80 temp=38.2 pwm=0.700 sysload=0.14 cputime=2126.463 memavail=3585092 print_time=1056.871 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82941.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=22391 bytes_read=166797 bytes_retransmit=9 bytes_invalid=0 send_seq=1700 receive_seq=1700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999227  heater_bed: target=80 temp=38.4 pwm=0.700 sysload=0.14 cputime=2126.492 memavail=3585156 print_time=1057.872 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82942.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=22538 bytes_read=167003 bytes_retransmit=9 bytes_invalid=0 send_seq=1706 receive_seq=1706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999225  heater_bed: target=80 temp=38.5 pwm=0.700 sysload=0.13 cputime=2126.524 memavail=3585256 print_time=1058.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82943.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=22641 bytes_read=167174 bytes_retransmit=9 bytes_invalid=0 send_seq=1711 receive_seq=1711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999224  heater_bed: target=80 temp=38.6 pwm=0.700 sysload=0.13 cputime=2126.556 memavail=3585288 print_time=1059.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82944.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=22788 bytes_read=167380 bytes_retransmit=9 bytes_invalid=0 send_seq=1717 receive_seq=1717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999223  heater_bed: target=80 temp=38.8 pwm=0.700 sysload=0.13 cputime=2126.590 memavail=3585324 print_time=1060.874 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82945.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=22935 bytes_read=167571 bytes_retransmit=9 bytes_invalid=0 send_seq=1723 receive_seq=1723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999221  heater_bed: target=80 temp=38.9 pwm=0.700 sysload=0.13 cputime=2126.622 memavail=3585388 print_time=1061.874 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82946.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=22979 bytes_read=167732 bytes_retransmit=9 bytes_invalid=0 send_seq=1726 receive_seq=1726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999219  heater_bed: target=80 temp=39.1 pwm=0.700 sysload=0.13 cputime=2126.650 memavail=3585420 print_time=1062.875 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82947.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=23039 bytes_read=167943 bytes_retransmit=9 bytes_invalid=0 send_seq=1730 receive_seq=1730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999218  heater_bed: target=80 temp=39.3 pwm=0.700 sysload=0.12 cputime=2126.681 memavail=3585448 print_time=1063.875 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82948.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=23083 bytes_read=168119 bytes_retransmit=9 bytes_invalid=0 send_seq=1733 receive_seq=1733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999217  heater_bed: target=80 temp=39.4 pwm=0.700 sysload=0.12 cputime=2126.711 memavail=3585364 print_time=1064.875 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82949.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=23127 bytes_read=168280 bytes_retransmit=9 bytes_invalid=0 send_seq=1736 receive_seq=1736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999218  heater_bed: target=80 temp=39.6 pwm=0.700 sysload=0.12 cputime=2126.739 memavail=3585476 print_time=1065.876 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82950.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=23239 bytes_read=168481 bytes_retransmit=9 bytes_invalid=0 send_seq=1741 receive_seq=1741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999216  heater_bed: target=80 temp=39.7 pwm=0.700 sysload=0.12 cputime=2126.764 memavail=3585528 print_time=1066.877 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82951.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=23299 bytes_read=168662 bytes_retransmit=9 bytes_invalid=0 send_seq=1745 receive_seq=1745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999211  heater_bed: target=80 temp=39.8 pwm=0.700 sysload=0.12 cputime=2126.787 memavail=3585248 print_time=1067.878 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82952.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=23349 bytes_read=168869 bytes_retransmit=9 bytes_invalid=0 send_seq=1749 receive_seq=1749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999210  heater_bed: target=80 temp=40.0 pwm=0.700 sysload=0.11 cputime=2126.818 memavail=3585316 print_time=1068.879 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82953.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=23393 bytes_read=169045 bytes_retransmit=9 bytes_invalid=0 send_seq=1752 receive_seq=1752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999208  heater_bed: target=80 temp=40.1 pwm=0.700 sysload=0.11 cputime=2126.848 memavail=3585136 print_time=1069.879 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82954.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=23437 bytes_read=169221 bytes_retransmit=9 bytes_invalid=0 send_seq=1755 receive_seq=1755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999206  heater_bed: target=80 temp=40.3 pwm=0.700 sysload=0.11 cputime=2126.878 memavail=3585180 print_time=1070.881 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82955.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=23497 bytes_read=169402 bytes_retransmit=9 bytes_invalid=0 send_seq=1759 receive_seq=1759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999207  heater_bed: target=80 temp=40.4 pwm=0.700 sysload=0.11 cputime=2126.907 memavail=3585136 print_time=1071.881 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82956.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=23541 bytes_read=169576 bytes_retransmit=9 bytes_invalid=0 send_seq=1762 receive_seq=1762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999205  heater_bed: target=80 temp=40.5 pwm=0.700 sysload=0.11 cputime=2126.936 memavail=3585136 print_time=1072.881 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82957.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23634 bytes_read=169761 bytes_retransmit=9 bytes_invalid=0 send_seq=1766 receive_seq=1766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999203  heater_bed: target=80 temp=40.7 pwm=0.700 sysload=0.10 cputime=2126.967 memavail=3585168 print_time=1073.881 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82958.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23678 bytes_read=169934 bytes_retransmit=9 bytes_invalid=0 send_seq=1769 receive_seq=1769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999211  heater_bed: target=80 temp=40.8 pwm=0.700 sysload=0.10 cputime=2126.997 memavail=3585180 print_time=1074.882 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82959.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23841 bytes_read=170130 bytes_retransmit=9 bytes_invalid=0 send_seq=1776 receive_seq=1776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999207  heater_bed: target=80 temp=41.0 pwm=0.700 sysload=0.10 cputime=2127.032 memavail=3585184 print_time=1075.883 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82960.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23885 bytes_read=170306 bytes_retransmit=9 bytes_invalid=0 send_seq=1779 receive_seq=1779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999204  heater_bed: target=80 temp=41.2 pwm=0.700 sysload=0.10 cputime=2127.062 memavail=3585360 print_time=1076.883 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82961.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23929 bytes_read=170482 bytes_retransmit=9 bytes_invalid=0 send_seq=1782 receive_seq=1782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999202  heater_bed: target=80 temp=41.4 pwm=0.700 sysload=0.10 cputime=2127.092 memavail=3585360 print_time=1077.884 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82962.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=23973 bytes_read=170673 bytes_retransmit=9 bytes_invalid=0 send_seq=1785 receive_seq=1785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999201  heater_bed: target=80 temp=41.5 pwm=0.700 sysload=0.09 cputime=2127.121 memavail=3585372 print_time=1078.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82963.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=24071 bytes_read=170859 bytes_retransmit=9 bytes_invalid=0 send_seq=1790 receive_seq=1790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999196  heater_bed: target=80 temp=41.6 pwm=0.700 sysload=0.09 cputime=2127.152 memavail=3585372 print_time=1079.885 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82964.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=24131 bytes_read=171040 bytes_retransmit=9 bytes_invalid=0 send_seq=1794 receive_seq=1794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999194  heater_bed: target=80 temp=41.8 pwm=0.700 sysload=0.09 cputime=2127.183 memavail=3585412 print_time=1080.886 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82965.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=24175 bytes_read=171216 bytes_retransmit=9 bytes_invalid=0 send_seq=1797 receive_seq=1797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999205  heater_bed: target=80 temp=42.0 pwm=0.700 sysload=0.09 cputime=2127.212 memavail=3585412 print_time=1081.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82966.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=24219 bytes_read=171392 bytes_retransmit=9 bytes_invalid=0 send_seq=1800 receive_seq=1800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999208  heater_bed: target=80 temp=42.1 pwm=0.700 sysload=0.09 cputime=2127.241 memavail=3585432 print_time=1082.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82967.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24263 bytes_read=171583 bytes_retransmit=9 bytes_invalid=0 send_seq=1803 receive_seq=1803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999206  heater_bed: target=80 temp=42.3 pwm=0.700 sysload=0.08 cputime=2127.270 memavail=3585444 print_time=1083.889 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82968.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24318 bytes_read=171759 bytes_retransmit=9 bytes_invalid=0 send_seq=1806 receive_seq=1806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999203  heater_bed: target=80 temp=42.4 pwm=0.700 sysload=0.08 cputime=2127.300 memavail=3585448 print_time=1084.889 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82969.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24362 bytes_read=171935 bytes_retransmit=9 bytes_invalid=0 send_seq=1809 receive_seq=1809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999201  heater_bed: target=80 temp=42.5 pwm=0.700 sysload=0.08 cputime=2127.330 memavail=3585448 print_time=1085.891 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82970.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24458 bytes_read=172121 bytes_retransmit=9 bytes_invalid=0 send_seq=1814 receive_seq=1814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999196  heater_bed: target=80 temp=42.7 pwm=0.700 sysload=0.08 cputime=2127.361 memavail=3584964 print_time=1086.891 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82971.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=24502 bytes_read=172297 bytes_retransmit=9 bytes_invalid=0 send_seq=1817 receive_seq=1817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999198  heater_bed: target=80 temp=42.8 pwm=0.700 sysload=0.08 cputime=2127.391 memavail=3584848 print_time=1087.893 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82972.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=24562 bytes_read=172493 bytes_retransmit=9 bytes_invalid=0 send_seq=1821 receive_seq=1821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999196  heater_bed: target=80 temp=42.9 pwm=0.700 sysload=0.08 cputime=2127.421 memavail=3584864 print_time=1088.894 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82973.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=24606 bytes_read=172669 bytes_retransmit=9 bytes_invalid=0 send_seq=1824 receive_seq=1824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999195  heater_bed: target=80 temp=43.2 pwm=0.700 sysload=0.08 cputime=2127.451 memavail=3584868 print_time=1089.895 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82974.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=24650 bytes_read=172845 bytes_retransmit=9 bytes_invalid=0 send_seq=1827 receive_seq=1827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999192  heater_bed: target=80 temp=43.3 pwm=0.700 sysload=0.08 cputime=2127.481 memavail=3584876 print_time=1090.896 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82975.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=24694 bytes_read=173021 bytes_retransmit=9 bytes_invalid=0 send_seq=1830 receive_seq=1830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999191  heater_bed: target=80 temp=43.4 pwm=0.700 sysload=0.08 cputime=2127.510 memavail=3584876 print_time=1091.897 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82976.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=24754 bytes_read=173202 bytes_retransmit=9 bytes_invalid=0 send_seq=1834 receive_seq=1834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999190  heater_bed: target=80 temp=43.6 pwm=0.700 sysload=0.08 cputime=2127.542 memavail=3584888 print_time=1092.897 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82977.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=24885 bytes_read=173408 bytes_retransmit=9 bytes_invalid=0 send_seq=1840 receive_seq=1840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999190  heater_bed: target=80 temp=43.7 pwm=0.700 sysload=0.23 cputime=2127.574 memavail=3584900 print_time=1093.898 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82978.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=24929 bytes_read=173584 bytes_retransmit=9 bytes_invalid=0 send_seq=1843 receive_seq=1843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999190  heater_bed: target=80 temp=43.8 pwm=0.700 sysload=0.23 cputime=2127.605 memavail=3584912 print_time=1094.899 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82979.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=24973 bytes_read=173760 bytes_retransmit=9 bytes_invalid=0 send_seq=1846 receive_seq=1846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999187  heater_bed: target=80 temp=44.0 pwm=0.700 sysload=0.23 cputime=2127.638 memavail=3584916 print_time=1095.900 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82980.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=25033 bytes_read=173939 bytes_retransmit=9 bytes_invalid=0 send_seq=1850 receive_seq=1850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999185  heater_bed: target=80 temp=44.1 pwm=0.700 sysload=0.23 cputime=2127.668 memavail=3584924 print_time=1096.901 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82981.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=25077 bytes_read=174104 bytes_retransmit=9 bytes_invalid=0 send_seq=1853 receive_seq=1853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999186  heater_bed: target=80 temp=44.3 pwm=0.700 sysload=0.23 cputime=2127.698 memavail=3584932 print_time=1097.902 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82982.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25121 bytes_read=174291 bytes_retransmit=9 bytes_invalid=0 send_seq=1856 receive_seq=1856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999185  heater_bed: target=80 temp=44.4 pwm=0.700 sysload=0.21 cputime=2127.728 memavail=3584940 print_time=1098.902 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82983.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25165 bytes_read=174467 bytes_retransmit=9 bytes_invalid=0 send_seq=1859 receive_seq=1859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999191  heater_bed: target=80 temp=44.5 pwm=0.700 sysload=0.21 cputime=2127.755 memavail=3584944 print_time=1099.903 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82984.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25300 bytes_read=174648 bytes_retransmit=9 bytes_invalid=0 send_seq=1863 receive_seq=1863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999187  heater_bed: target=80 temp=44.6 pwm=0.700 sysload=0.21 cputime=2127.787 memavail=3584832 print_time=1100.904 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82985.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25360 bytes_read=174829 bytes_retransmit=9 bytes_invalid=0 send_seq=1867 receive_seq=1867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999185  heater_bed: target=80 temp=44.8 pwm=0.700 sysload=0.21 cputime=2127.818 memavail=3584844 print_time=1101.905 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82986.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25404 bytes_read=175005 bytes_retransmit=9 bytes_invalid=0 send_seq=1870 receive_seq=1870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999182  heater_bed: target=80 temp=44.9 pwm=0.700 sysload=0.21 cputime=2127.848 memavail=3584848 print_time=1102.905 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82987.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=25448 bytes_read=175196 bytes_retransmit=9 bytes_invalid=0 send_seq=1873 receive_seq=1873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999184  heater_bed: target=80 temp=45.0 pwm=0.700 sysload=0.20 cputime=2127.878 memavail=3584852 print_time=1103.905 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82988.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=25492 bytes_read=175372 bytes_retransmit=9 bytes_invalid=0 send_seq=1876 receive_seq=1876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999182  heater_bed: target=80 temp=45.2 pwm=0.700 sysload=0.20 cputime=2127.907 memavail=3584868 print_time=1104.906 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82989.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=25552 bytes_read=175553 bytes_retransmit=9 bytes_invalid=0 send_seq=1880 receive_seq=1880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999181  heater_bed: target=80 temp=45.4 pwm=0.700 sysload=0.20 cputime=2127.936 memavail=3584872 print_time=1105.907 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82990.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=25591 bytes_read=175724 bytes_retransmit=9 bytes_invalid=0 send_seq=1882 receive_seq=1882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999178  heater_bed: target=80 temp=45.5 pwm=0.700 sysload=0.20 cputime=2127.963 memavail=3584124 print_time=1106.908 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.0 pwm=0.000
Stats 82991.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=25679 bytes_read=175905 bytes_retransmit=9 bytes_invalid=0 send_seq=1886 receive_seq=1886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999177  heater_bed: target=80 temp=45.7 pwm=0.700 sysload=0.20 cputime=2127.994 memavail=3584124 print_time=1107.909 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82992.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25723 bytes_read=176096 bytes_retransmit=9 bytes_invalid=0 send_seq=1889 receive_seq=1889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999174  heater_bed: target=80 temp=45.7 pwm=0.700 sysload=0.18 cputime=2128.024 memavail=3584124 print_time=1108.910 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82993.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25783 bytes_read=176277 bytes_retransmit=9 bytes_invalid=0 send_seq=1893 receive_seq=1893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999171  heater_bed: target=80 temp=46.0 pwm=0.700 sysload=0.18 cputime=2128.055 memavail=3584036 print_time=1109.911 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82994.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25827 bytes_read=176453 bytes_retransmit=9 bytes_invalid=0 send_seq=1896 receive_seq=1896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999169  heater_bed: target=80 temp=46.1 pwm=0.700 sysload=0.18 cputime=2128.086 memavail=3584040 print_time=1110.911 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82995.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25871 bytes_read=176629 bytes_retransmit=9 bytes_invalid=0 send_seq=1899 receive_seq=1899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999167  heater_bed: target=80 temp=46.2 pwm=0.700 sysload=0.18 cputime=2128.116 memavail=3584044 print_time=1111.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82996.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=25915 bytes_read=176805 bytes_retransmit=9 bytes_invalid=0 send_seq=1902 receive_seq=1902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999166  heater_bed: target=80 temp=46.4 pwm=0.700 sysload=0.18 cputime=2128.146 memavail=3584072 print_time=1112.913 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82997.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=25975 bytes_read=177001 bytes_retransmit=9 bytes_invalid=0 send_seq=1906 receive_seq=1906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999164  heater_bed: target=80 temp=46.6 pwm=0.700 sysload=0.16 cputime=2128.177 memavail=3584076 print_time=1113.914 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 82998.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=26073 bytes_read=177187 bytes_retransmit=9 bytes_invalid=0 send_seq=1911 receive_seq=1911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999172  heater_bed: target=80 temp=46.7 pwm=0.700 sysload=0.16 cputime=2128.210 memavail=3584084 print_time=1114.915 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 82999.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=26117 bytes_read=177363 bytes_retransmit=9 bytes_invalid=0 send_seq=1914 receive_seq=1914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999169  heater_bed: target=80 temp=46.8 pwm=0.700 sysload=0.16 cputime=2128.242 memavail=3584096 print_time=1115.915 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83000.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=26161 bytes_read=177539 bytes_retransmit=9 bytes_invalid=0 send_seq=1917 receive_seq=1917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999167  heater_bed: target=80 temp=47.0 pwm=0.700 sysload=0.16 cputime=2128.272 memavail=3583604 print_time=1116.915 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 83001.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=26221 bytes_read=177720 bytes_retransmit=9 bytes_invalid=0 send_seq=1921 receive_seq=1921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999164  heater_bed: target=80 temp=47.1 pwm=0.700 sysload=0.16 cputime=2128.303 memavail=3583604 print_time=1117.916 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83002.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26265 bytes_read=177911 bytes_retransmit=9 bytes_invalid=0 send_seq=1924 receive_seq=1924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999162  heater_bed: target=80 temp=47.3 pwm=0.700 sysload=0.15 cputime=2128.333 memavail=3583488 print_time=1118.917 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 83003.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26309 bytes_read=178087 bytes_retransmit=9 bytes_invalid=0 send_seq=1927 receive_seq=1927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999161  heater_bed: target=80 temp=47.4 pwm=0.700 sysload=0.15 cputime=2128.363 memavail=3583504 print_time=1119.918 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83004.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26353 bytes_read=178259 bytes_retransmit=9 bytes_invalid=0 send_seq=1930 receive_seq=1930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999160  heater_bed: target=80 temp=47.5 pwm=0.700 sysload=0.15 cputime=2128.392 memavail=3583508 print_time=1120.919 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83005.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26446 bytes_read=178429 bytes_retransmit=9 bytes_invalid=0 send_seq=1934 receive_seq=1934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999160  heater_bed: target=80 temp=47.7 pwm=0.700 sysload=0.15 cputime=2128.423 memavail=3583520 print_time=1121.920 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83006.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26506 bytes_read=178608 bytes_retransmit=9 bytes_invalid=0 send_seq=1938 receive_seq=1938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999197  heater_bed: target=80 temp=47.8 pwm=0.700 sysload=0.15 cputime=2128.453 memavail=3583524 print_time=1122.921 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83007.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=26550 bytes_read=178814 bytes_retransmit=9 bytes_invalid=0 send_seq=1941 receive_seq=1941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999194  heater_bed: target=80 temp=47.9 pwm=0.700 sysload=0.14 cputime=2128.482 memavail=3583540 print_time=1123.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83008.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=26594 bytes_read=178975 bytes_retransmit=9 bytes_invalid=0 send_seq=1944 receive_seq=1944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999191  heater_bed: target=80 temp=48.1 pwm=0.700 sysload=0.14 cputime=2128.510 memavail=3583544 print_time=1124.923 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83009.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=26638 bytes_read=179151 bytes_retransmit=9 bytes_invalid=0 send_seq=1947 receive_seq=1947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999188  heater_bed: target=80 temp=48.3 pwm=0.700 sysload=0.14 cputime=2128.539 memavail=3583552 print_time=1125.924 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83010.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=26698 bytes_read=179347 bytes_retransmit=9 bytes_invalid=0 send_seq=1951 receive_seq=1951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999186  heater_bed: target=80 temp=48.4 pwm=0.700 sysload=0.14 cputime=2128.569 memavail=3583312 print_time=1126.925 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.1 pwm=0.000
Stats 83011.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=26742 bytes_read=179508 bytes_retransmit=9 bytes_invalid=0 send_seq=1954 receive_seq=1954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999182  heater_bed: target=80 temp=48.5 pwm=0.700 sysload=0.14 cputime=2128.599 memavail=3583316 print_time=1127.925 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83012.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26829 bytes_read=179704 bytes_retransmit=9 bytes_invalid=0 send_seq=1958 receive_seq=1958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999185  heater_bed: target=80 temp=48.7 pwm=0.700 sysload=0.13 cputime=2128.633 memavail=3583320 print_time=1128.925 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83013.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26879 bytes_read=179911 bytes_retransmit=9 bytes_invalid=0 send_seq=1962 receive_seq=1962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999175  heater_bed: target=80 temp=48.8 pwm=0.700 sysload=0.13 cputime=2128.665 memavail=3583336 print_time=1129.926 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83014.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26939 bytes_read=180077 bytes_retransmit=9 bytes_invalid=0 send_seq=1966 receive_seq=1966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999172  heater_bed: target=80 temp=48.9 pwm=0.700 sysload=0.13 cputime=2128.694 memavail=3583344 print_time=1130.927 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83015.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26983 bytes_read=180253 bytes_retransmit=9 bytes_invalid=0 send_seq=1969 receive_seq=1969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999170  heater_bed: target=80 temp=49.1 pwm=0.700 sysload=0.13 cputime=2128.723 memavail=3583352 print_time=1131.927 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83016.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27027 bytes_read=180444 bytes_retransmit=9 bytes_invalid=0 send_seq=1972 receive_seq=1972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999165  heater_bed: target=80 temp=49.2 pwm=0.700 sysload=0.13 cputime=2128.753 memavail=3583356 print_time=1132.928 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83017.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27071 bytes_read=180620 bytes_retransmit=9 bytes_invalid=0 send_seq=1975 receive_seq=1975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999161  heater_bed: target=80 temp=49.4 pwm=0.700 sysload=0.12 cputime=2128.784 memavail=3583360 print_time=1133.928 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83018.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27131 bytes_read=180801 bytes_retransmit=9 bytes_invalid=0 send_seq=1979 receive_seq=1979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999159  heater_bed: target=80 temp=49.5 pwm=0.700 sysload=0.12 cputime=2128.816 memavail=3583368 print_time=1134.929 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83019.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27238 bytes_read=180997 bytes_retransmit=9 bytes_invalid=0 send_seq=1983 receive_seq=1983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999156  heater_bed: target=80 temp=49.7 pwm=0.700 sysload=0.12 cputime=2128.847 memavail=3583372 print_time=1135.929 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83020.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27282 bytes_read=181158 bytes_retransmit=9 bytes_invalid=0 send_seq=1986 receive_seq=1986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999153  heater_bed: target=80 temp=49.8 pwm=0.700 sysload=0.12 cputime=2128.875 memavail=3582640 print_time=1136.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83021.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27326 bytes_read=181334 bytes_retransmit=9 bytes_invalid=0 send_seq=1989 receive_seq=1989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999148  heater_bed: target=80 temp=50.0 pwm=0.700 sysload=0.12 cputime=2128.906 memavail=3582648 print_time=1137.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83022.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=27381 bytes_read=181540 bytes_retransmit=9 bytes_invalid=0 send_seq=1992 receive_seq=1992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999141  heater_bed: target=80 temp=50.1 pwm=0.700 sysload=0.11 cputime=2128.937 memavail=3582652 print_time=1138.931 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83023.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=27425 bytes_read=181701 bytes_retransmit=9 bytes_invalid=0 send_seq=1995 receive_seq=1995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999140  heater_bed: target=80 temp=50.2 pwm=0.700 sysload=0.11 cputime=2128.967 memavail=3582668 print_time=1139.932 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83024.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=27469 bytes_read=181877 bytes_retransmit=9 bytes_invalid=0 send_seq=1998 receive_seq=1998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999138  heater_bed: target=80 temp=50.4 pwm=0.700 sysload=0.11 cputime=2128.997 memavail=3582672 print_time=1140.932 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83025.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=27513 bytes_read=182068 bytes_retransmit=9 bytes_invalid=0 send_seq=2001 receive_seq=2001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999138  heater_bed: target=80 temp=50.5 pwm=0.700 sysload=0.11 cputime=2129.029 memavail=3582680 print_time=1141.933 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83026.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=27606 bytes_read=182234 bytes_retransmit=9 bytes_invalid=0 send_seq=2005 receive_seq=2005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999137  heater_bed: target=80 temp=50.7 pwm=0.700 sysload=0.11 cputime=2129.059 memavail=3582684 print_time=1142.933 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83027.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27666 bytes_read=182430 bytes_retransmit=9 bytes_invalid=0 send_seq=2009 receive_seq=2009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999136  heater_bed: target=80 temp=50.9 pwm=0.700 sysload=0.10 cputime=2129.089 memavail=3582700 print_time=1143.935 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83028.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27710 bytes_read=182614 bytes_retransmit=9 bytes_invalid=0 send_seq=2012 receive_seq=2012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999137  heater_bed: target=80 temp=51.0 pwm=0.700 sysload=0.10 cputime=2129.118 memavail=3582708 print_time=1144.935 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83029.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27754 bytes_read=182765 bytes_retransmit=9 bytes_invalid=0 send_seq=2015 receive_seq=2015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999136  heater_bed: target=80 temp=51.1 pwm=0.700 sysload=0.10 cputime=2129.147 memavail=3582712 print_time=1145.935 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83030.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27798 bytes_read=182956 bytes_retransmit=9 bytes_invalid=0 send_seq=2018 receive_seq=2018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999132  heater_bed: target=80 temp=51.3 pwm=0.700 sysload=0.10 cputime=2129.177 memavail=3582500 print_time=1146.936 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83031.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=27858 bytes_read=183137 bytes_retransmit=9 bytes_invalid=0 send_seq=2022 receive_seq=2022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999132  heater_bed: target=80 temp=51.4 pwm=0.700 sysload=0.10 cputime=2129.207 memavail=3582508 print_time=1147.937 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83032.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27902 bytes_read=183313 bytes_retransmit=9 bytes_invalid=0 send_seq=2025 receive_seq=2025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999129  heater_bed: target=80 temp=51.5 pwm=0.700 sysload=0.17 cputime=2129.237 memavail=3582516 print_time=1148.937 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83033.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28000 bytes_read=183514 bytes_retransmit=9 bytes_invalid=0 send_seq=2030 receive_seq=2030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999128  heater_bed: target=80 temp=51.7 pwm=0.700 sysload=0.17 cputime=2129.269 memavail=3582520 print_time=1149.938 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83034.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28044 bytes_read=183690 bytes_retransmit=9 bytes_invalid=0 send_seq=2033 receive_seq=2033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999130  heater_bed: target=80 temp=51.8 pwm=0.700 sysload=0.17 cputime=2129.299 memavail=3582532 print_time=1150.938 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83035.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28104 bytes_read=183856 bytes_retransmit=9 bytes_invalid=0 send_seq=2037 receive_seq=2037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999127  heater_bed: target=80 temp=51.9 pwm=0.700 sysload=0.17 cputime=2129.329 memavail=3582536 print_time=1151.939 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83036.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28148 bytes_read=184047 bytes_retransmit=9 bytes_invalid=0 send_seq=2040 receive_seq=2040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999126  heater_bed: target=80 temp=52.1 pwm=0.700 sysload=0.17 cputime=2129.360 memavail=3582548 print_time=1152.940 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83037.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28192 bytes_read=184238 bytes_retransmit=9 bytes_invalid=0 send_seq=2043 receive_seq=2043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999125  heater_bed: target=80 temp=52.2 pwm=0.700 sysload=0.16 cputime=2129.392 memavail=3582556 print_time=1153.941 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83038.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28236 bytes_read=184399 bytes_retransmit=9 bytes_invalid=0 send_seq=2046 receive_seq=2046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999124  heater_bed: target=80 temp=52.4 pwm=0.700 sysload=0.16 cputime=2129.421 memavail=3582468 print_time=1154.941 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83039.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28296 bytes_read=184595 bytes_retransmit=9 bytes_invalid=0 send_seq=2050 receive_seq=2050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999125  heater_bed: target=80 temp=52.5 pwm=0.700 sysload=0.16 cputime=2129.453 memavail=3582476 print_time=1155.942 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83040.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28387 bytes_read=184776 bytes_retransmit=9 bytes_invalid=0 send_seq=2054 receive_seq=2054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999123  heater_bed: target=80 temp=52.6 pwm=0.700 sysload=0.16 cputime=2129.483 memavail=3582736 print_time=1156.942 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83041.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28431 bytes_read=184937 bytes_retransmit=9 bytes_invalid=0 send_seq=2057 receive_seq=2057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=80 temp=52.7 pwm=0.700 sysload=0.16 cputime=2129.512 memavail=3582740 print_time=1157.943 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83042.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28475 bytes_read=185143 bytes_retransmit=9 bytes_invalid=0 send_seq=2060 receive_seq=2060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999120  heater_bed: target=80 temp=52.9 pwm=0.700 sysload=0.14 cputime=2129.542 memavail=3582748 print_time=1158.944 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83043.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28530 bytes_read=185319 bytes_retransmit=9 bytes_invalid=0 send_seq=2063 receive_seq=2063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=80 temp=53.1 pwm=0.700 sysload=0.14 cputime=2129.572 memavail=3582760 print_time=1159.944 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83044.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28628 bytes_read=185490 bytes_retransmit=9 bytes_invalid=0 send_seq=2068 receive_seq=2068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=53.2 pwm=0.700 sysload=0.14 cputime=2129.603 memavail=3582768 print_time=1160.945 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83045.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28672 bytes_read=185681 bytes_retransmit=9 bytes_invalid=0 send_seq=2071 receive_seq=2071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=53.3 pwm=0.700 sysload=0.14 cputime=2129.635 memavail=3582776 print_time=1161.946 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83046.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28716 bytes_read=185857 bytes_retransmit=9 bytes_invalid=0 send_seq=2074 receive_seq=2074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=53.4 pwm=0.700 sysload=0.14 cputime=2129.665 memavail=3582780 print_time=1162.946 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83047.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28760 bytes_read=186033 bytes_retransmit=9 bytes_invalid=0 send_seq=2077 receive_seq=2077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=53.6 pwm=0.700 sysload=0.13 cputime=2129.694 memavail=3582792 print_time=1163.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83048.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28869 bytes_read=186234 bytes_retransmit=9 bytes_invalid=0 send_seq=2082 receive_seq=2082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=53.7 pwm=0.700 sysload=0.13 cputime=2129.726 memavail=3582796 print_time=1164.948 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83049.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28913 bytes_read=186410 bytes_retransmit=9 bytes_invalid=0 send_seq=2085 receive_seq=2085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=80 temp=53.8 pwm=0.700 sysload=0.13 cputime=2129.756 memavail=3582804 print_time=1165.948 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83050.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=28957 bytes_read=186571 bytes_retransmit=9 bytes_invalid=0 send_seq=2088 receive_seq=2088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=80 temp=53.9 pwm=0.700 sysload=0.13 cputime=2129.788 memavail=3582820 print_time=1166.949 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83051.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29001 bytes_read=186762 bytes_retransmit=9 bytes_invalid=0 send_seq=2091 receive_seq=2091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999118  heater_bed: target=80 temp=54.1 pwm=0.700 sysload=0.13 cputime=2129.820 memavail=3582828 print_time=1167.949 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83052.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29061 bytes_read=186950 bytes_retransmit=9 bytes_invalid=0 send_seq=2095 receive_seq=2095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=54.2 pwm=0.700 sysload=0.12 cputime=2129.850 memavail=3582832 print_time=1168.950 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83053.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29105 bytes_read=187103 bytes_retransmit=9 bytes_invalid=0 send_seq=2098 receive_seq=2098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=54.4 pwm=0.700 sysload=0.12 cputime=2129.879 memavail=3582844 print_time=1169.950 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83054.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29149 bytes_read=187294 bytes_retransmit=9 bytes_invalid=0 send_seq=2101 receive_seq=2101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=54.5 pwm=0.700 sysload=0.12 cputime=2129.910 memavail=3582852 print_time=1170.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83055.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29242 bytes_read=187475 bytes_retransmit=9 bytes_invalid=0 send_seq=2105 receive_seq=2105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=80 temp=54.6 pwm=0.700 sysload=0.12 cputime=2129.943 memavail=3582860 print_time=1171.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83056.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29302 bytes_read=187641 bytes_retransmit=9 bytes_invalid=0 send_seq=2109 receive_seq=2109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=54.8 pwm=0.700 sysload=0.12 cputime=2129.975 memavail=3582864 print_time=1172.953 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83057.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=29346 bytes_read=187847 bytes_retransmit=9 bytes_invalid=0 send_seq=2112 receive_seq=2112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=54.8 pwm=0.700 sysload=0.11 cputime=2130.005 memavail=3582868 print_time=1173.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83058.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=29390 bytes_read=188023 bytes_retransmit=9 bytes_invalid=0 send_seq=2115 receive_seq=2115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=80 temp=55.0 pwm=0.700 sysload=0.11 cputime=2130.034 memavail=3582888 print_time=1174.954 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83059.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=29434 bytes_read=188184 bytes_retransmit=9 bytes_invalid=0 send_seq=2118 receive_seq=2118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=55.1 pwm=0.700 sysload=0.11 cputime=2130.064 memavail=3582892 print_time=1175.955 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83060.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=29494 bytes_read=188380 bytes_retransmit=9 bytes_invalid=0 send_seq=2122 receive_seq=2122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=80 temp=55.3 pwm=0.700 sysload=0.11 cputime=2130.096 memavail=3583404 print_time=1176.955 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 83061.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=29538 bytes_read=188556 bytes_retransmit=9 bytes_invalid=0 send_seq=2125 receive_seq=2125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=55.4 pwm=0.700 sysload=0.11 cputime=2130.127 memavail=3583408 print_time=1177.956 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83062.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29582 bytes_read=188732 bytes_retransmit=9 bytes_invalid=0 send_seq=2128 receive_seq=2128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999117  heater_bed: target=80 temp=55.5 pwm=0.700 sysload=0.10 cputime=2130.158 memavail=3583412 print_time=1178.957 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83063.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29670 bytes_read=188928 bytes_retransmit=9 bytes_invalid=0 send_seq=2132 receive_seq=2132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=55.7 pwm=0.700 sysload=0.10 cputime=2130.191 memavail=3583416 print_time=1179.958 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83064.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29730 bytes_read=189109 bytes_retransmit=9 bytes_invalid=0 send_seq=2136 receive_seq=2136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=55.8 pwm=0.700 sysload=0.10 cputime=2130.221 memavail=3583424 print_time=1180.958 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83065.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29774 bytes_read=189270 bytes_retransmit=9 bytes_invalid=0 send_seq=2139 receive_seq=2139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999117  heater_bed: target=80 temp=55.9 pwm=0.700 sysload=0.10 cputime=2130.251 memavail=3583432 print_time=1181.959 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83066.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29818 bytes_read=189461 bytes_retransmit=9 bytes_invalid=0 send_seq=2142 receive_seq=2142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=56.0 pwm=0.700 sysload=0.10 cputime=2130.282 memavail=3583448 print_time=1182.960 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83067.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29862 bytes_read=189652 bytes_retransmit=9 bytes_invalid=0 send_seq=2145 receive_seq=2145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=56.2 pwm=0.700 sysload=0.09 cputime=2130.312 memavail=3583452 print_time=1183.960 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83068.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29906 bytes_read=189813 bytes_retransmit=9 bytes_invalid=0 send_seq=2148 receive_seq=2148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=80 temp=56.3 pwm=0.700 sysload=0.09 cputime=2130.341 memavail=3583460 print_time=1184.961 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83069.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=29966 bytes_read=190009 bytes_retransmit=9 bytes_invalid=0 send_seq=2152 receive_seq=2152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=56.4 pwm=0.700 sysload=0.09 cputime=2130.371 memavail=3583472 print_time=1185.962 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83070.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=30005 bytes_read=190180 bytes_retransmit=9 bytes_invalid=0 send_seq=2154 receive_seq=2154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=56.5 pwm=0.700 sysload=0.09 cputime=2130.400 memavail=3583728 print_time=1186.963 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83071.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=30098 bytes_read=190346 bytes_retransmit=9 bytes_invalid=0 send_seq=2158 receive_seq=2158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999118  heater_bed: target=80 temp=56.7 pwm=0.700 sysload=0.09 cputime=2130.430 memavail=3583736 print_time=1187.963 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83072.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=30142 bytes_read=190552 bytes_retransmit=9 bytes_invalid=0 send_seq=2161 receive_seq=2161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=56.8 pwm=0.700 sysload=0.09 cputime=2130.460 memavail=3583736 print_time=1188.964 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83073.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=30202 bytes_read=190733 bytes_retransmit=9 bytes_invalid=0 send_seq=2165 receive_seq=2165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=56.9 pwm=0.700 sysload=0.09 cputime=2130.490 memavail=3583740 print_time=1189.964 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83074.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=30252 bytes_read=190910 bytes_retransmit=9 bytes_invalid=0 send_seq=2169 receive_seq=2169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=80 temp=57.0 pwm=0.700 sysload=0.09 cputime=2130.520 memavail=3583764 print_time=1190.965 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83075.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=30296 bytes_read=191101 bytes_retransmit=9 bytes_invalid=0 send_seq=2172 receive_seq=2172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=80 temp=57.2 pwm=0.700 sysload=0.09 cputime=2130.550 memavail=3583772 print_time=1191.965 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83076.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=30340 bytes_read=191267 bytes_retransmit=9 bytes_invalid=0 send_seq=2175 receive_seq=2175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999120  heater_bed: target=80 temp=57.3 pwm=0.700 sysload=0.09 cputime=2130.579 memavail=3583776 print_time=1192.966 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83077.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30400 bytes_read=191442 bytes_retransmit=9 bytes_invalid=0 send_seq=2179 receive_seq=2179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999118  heater_bed: target=80 temp=57.3 pwm=0.700 sysload=0.08 cputime=2130.608 memavail=3583776 print_time=1193.967 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83078.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30444 bytes_read=191633 bytes_retransmit=9 bytes_invalid=0 send_seq=2182 receive_seq=2182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=57.6 pwm=0.700 sysload=0.08 cputime=2130.638 memavail=3583776 print_time=1194.967 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83079.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30542 bytes_read=191819 bytes_retransmit=9 bytes_invalid=0 send_seq=2187 receive_seq=2187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=80 temp=57.7 pwm=0.700 sysload=0.08 cputime=2130.669 memavail=3583672 print_time=1195.968 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83080.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30586 bytes_read=191980 bytes_retransmit=9 bytes_invalid=0 send_seq=2190 receive_seq=2190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=57.8 pwm=0.700 sysload=0.08 cputime=2130.698 memavail=3583572 print_time=1196.970 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83081.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30641 bytes_read=192171 bytes_retransmit=9 bytes_invalid=0 send_seq=2193 receive_seq=2193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=57.9 pwm=0.700 sysload=0.08 cputime=2130.728 memavail=3583456 print_time=1197.972 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83082.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30685 bytes_read=192362 bytes_retransmit=9 bytes_invalid=0 send_seq=2196 receive_seq=2196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=58.0 pwm=0.700 sysload=0.07 cputime=2130.758 memavail=3583464 print_time=1198.971 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83083.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30729 bytes_read=192523 bytes_retransmit=9 bytes_invalid=0 send_seq=2199 receive_seq=2199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=80 temp=58.2 pwm=0.700 sysload=0.07 cputime=2130.788 memavail=3583220 print_time=1199.971 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83084.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30773 bytes_read=192714 bytes_retransmit=9 bytes_invalid=0 send_seq=2202 receive_seq=2202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999096  heater_bed: target=80 temp=58.3 pwm=0.700 sysload=0.07 cputime=2130.817 memavail=3583236 print_time=1200.972 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83085.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30828 bytes_read=192890 bytes_retransmit=9 bytes_invalid=0 send_seq=2205 receive_seq=2205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999095  heater_bed: target=80 temp=58.4 pwm=0.700 sysload=0.07 cputime=2130.847 memavail=3583244 print_time=1201.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83086.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30872 bytes_read=193051 bytes_retransmit=9 bytes_invalid=0 send_seq=2208 receive_seq=2208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=58.5 pwm=0.700 sysload=0.07 cputime=2130.876 memavail=3583248 print_time=1202.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83087.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30964 bytes_read=193267 bytes_retransmit=9 bytes_invalid=0 send_seq=2213 receive_seq=2213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=58.7 pwm=0.700 sysload=0.07 cputime=2130.909 memavail=3583128 print_time=1203.975 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83088.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31008 bytes_read=193443 bytes_retransmit=9 bytes_invalid=0 send_seq=2216 receive_seq=2216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999095  heater_bed: target=80 temp=58.8 pwm=0.700 sysload=0.07 cputime=2130.939 memavail=3583008 print_time=1204.976 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83089.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31052 bytes_read=193619 bytes_retransmit=9 bytes_invalid=0 send_seq=2219 receive_seq=2219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=179999093  heater_bed: target=80 temp=58.9 pwm=0.700 sysload=0.07 cputime=2130.969 memavail=3583164 print_time=1205.977 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.3 pwm=0.000
Stats 83090.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31112 bytes_read=193800 bytes_retransmit=9 bytes_invalid=0 send_seq=2223 receive_seq=2223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999091  heater_bed: target=80 temp=59.0 pwm=0.700 sysload=0.07 cputime=2130.998 memavail=3583360 print_time=1206.978 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83091.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31156 bytes_read=193976 bytes_retransmit=9 bytes_invalid=0 send_seq=2226 receive_seq=2226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999090  heater_bed: target=80 temp=59.1 pwm=0.700 sysload=0.07 cputime=2131.028 memavail=3583364 print_time=1207.979 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83092.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=31200 bytes_read=194167 bytes_retransmit=9 bytes_invalid=0 send_seq=2229 receive_seq=2229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999088  heater_bed: target=80 temp=59.3 pwm=0.700 sysload=0.22 cputime=2131.058 memavail=3583372 print_time=1208.979 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83093.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=31244 bytes_read=194343 bytes_retransmit=9 bytes_invalid=0 send_seq=2232 receive_seq=2232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999087  heater_bed: target=80 temp=59.4 pwm=0.700 sysload=0.22 cputime=2131.088 memavail=3583376 print_time=1209.979 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83094.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=31304 bytes_read=194524 bytes_retransmit=9 bytes_invalid=0 send_seq=2236 receive_seq=2236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999087  heater_bed: target=80 temp=59.5 pwm=0.700 sysload=0.22 cputime=2131.118 memavail=3583388 print_time=1210.980 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83095.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=31420 bytes_read=194705 bytes_retransmit=9 bytes_invalid=0 send_seq=2240 receive_seq=2240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999088  heater_bed: target=80 temp=59.7 pwm=0.700 sysload=0.22 cputime=2131.149 memavail=3583396 print_time=1211.980 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83096.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=31464 bytes_read=194881 bytes_retransmit=9 bytes_invalid=0 send_seq=2243 receive_seq=2243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999088  heater_bed: target=80 temp=59.8 pwm=0.700 sysload=0.22 cputime=2131.178 memavail=3583528 print_time=1212.980 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83097.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=31508 bytes_read=195072 bytes_retransmit=9 bytes_invalid=0 send_seq=2246 receive_seq=2246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999091  heater_bed: target=80 temp=59.9 pwm=0.700 sysload=0.20 cputime=2131.209 memavail=3583536 print_time=1213.981 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83098.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=31568 bytes_read=195253 bytes_retransmit=9 bytes_invalid=0 send_seq=2250 receive_seq=2250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999091  heater_bed: target=80 temp=60.0 pwm=0.700 sysload=0.20 cputime=2131.239 memavail=3583544 print_time=1214.981 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83099.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=31612 bytes_read=195429 bytes_retransmit=9 bytes_invalid=0 send_seq=2253 receive_seq=2253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999089  heater_bed: target=80 temp=60.1 pwm=0.700 sysload=0.20 cputime=2131.268 memavail=3583512 print_time=1215.982 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83100.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=31656 bytes_read=195593 bytes_retransmit=9 bytes_invalid=0 send_seq=2256 receive_seq=2256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999088  heater_bed: target=80 temp=60.2 pwm=0.700 sysload=0.20 cputime=2131.297 memavail=3583648 print_time=1216.982 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83101.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=31700 bytes_read=195764 bytes_retransmit=9 bytes_invalid=0 send_seq=2259 receive_seq=2259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999087  heater_bed: target=80 temp=60.4 pwm=0.700 sysload=0.20 cputime=2131.326 memavail=3583676 print_time=1217.983 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83102.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31803 bytes_read=195965 bytes_retransmit=9 bytes_invalid=0 send_seq=2264 receive_seq=2264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999087  heater_bed: target=80 temp=60.5 pwm=0.700 sysload=0.19 cputime=2131.357 memavail=3583612 print_time=1218.983 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83103.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31896 bytes_read=196146 bytes_retransmit=9 bytes_invalid=0 send_seq=2268 receive_seq=2268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999085  heater_bed: target=80 temp=60.6 pwm=0.700 sysload=0.19 cputime=2131.388 memavail=3583496 print_time=1219.984 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83104.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31994 bytes_read=196332 bytes_retransmit=9 bytes_invalid=0 send_seq=2273 receive_seq=2273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999083  heater_bed: target=80 temp=60.7 pwm=0.700 sysload=0.19 cputime=2131.419 memavail=3583552 print_time=1220.984 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83105.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32081 bytes_read=196513 bytes_retransmit=9 bytes_invalid=0 send_seq=2277 receive_seq=2277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999084  heater_bed: target=80 temp=60.9 pwm=0.700 sysload=0.19 cputime=2131.450 memavail=3583564 print_time=1221.984 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.4 pwm=0.000
Stats 83106.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32189 bytes_read=196704 bytes_retransmit=9 bytes_invalid=0 send_seq=2283 receive_seq=2283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999081  heater_bed: target=80 temp=60.9 pwm=0.700 sysload=0.19 cputime=2131.481 memavail=3583568 print_time=1222.985 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83107.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=32233 bytes_read=196895 bytes_retransmit=9 bytes_invalid=0 send_seq=2286 receive_seq=2286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999082  heater_bed: target=80 temp=61.1 pwm=0.700 sysload=0.33 cputime=2131.510 memavail=3583576 print_time=1223.985 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83108.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=32277 bytes_read=197071 bytes_retransmit=9 bytes_invalid=0 send_seq=2289 receive_seq=2289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999082  heater_bed: target=80 temp=61.3 pwm=0.700 sysload=0.33 cputime=2131.543 memavail=3583580 print_time=1224.986 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83109.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=32321 bytes_read=197247 bytes_retransmit=9 bytes_invalid=0 send_seq=2292 receive_seq=2292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999081  heater_bed: target=80 temp=61.4 pwm=0.700 sysload=0.33 cputime=2131.574 memavail=3583588 print_time=1225.987 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83110.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=32365 bytes_read=197423 bytes_retransmit=9 bytes_invalid=0 send_seq=2295 receive_seq=2295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=179999079  heater_bed: target=80 temp=61.5 pwm=0.700 sysload=0.33 cputime=2131.603 memavail=3583620 print_time=1226.988 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83111.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=32474 bytes_read=197609 bytes_retransmit=9 bytes_invalid=0 send_seq=2300 receive_seq=2300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999079  heater_bed: target=80 temp=61.6 pwm=0.700 sysload=0.33 cputime=2131.633 memavail=3583624 print_time=1227.988 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83112.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=32518 bytes_read=197800 bytes_retransmit=9 bytes_invalid=0 send_seq=2303 receive_seq=2303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999079  heater_bed: target=80 temp=61.7 pwm=0.700 sysload=0.31 cputime=2131.662 memavail=3583628 print_time=1228.989 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83113.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=32562 bytes_read=197976 bytes_retransmit=9 bytes_invalid=0 send_seq=2306 receive_seq=2306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=61.9 pwm=0.700 sysload=0.31 cputime=2131.690 memavail=3583512 print_time=1229.990 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83114.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=32606 bytes_read=198152 bytes_retransmit=9 bytes_invalid=0 send_seq=2309 receive_seq=2309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999077  heater_bed: target=80 temp=62.0 pwm=0.700 sysload=0.31 cputime=2131.719 memavail=3583520 print_time=1230.990 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83115.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=32666 bytes_read=198333 bytes_retransmit=9 bytes_invalid=0 send_seq=2313 receive_seq=2313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999085  heater_bed: target=80 temp=62.1 pwm=0.700 sysload=0.31 cputime=2131.750 memavail=3583444 print_time=1231.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83116.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=32710 bytes_read=198509 bytes_retransmit=9 bytes_invalid=0 send_seq=2316 receive_seq=2316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999083  heater_bed: target=80 temp=62.3 pwm=0.700 sysload=0.31 cputime=2131.779 memavail=3583448 print_time=1232.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83117.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32754 bytes_read=198700 bytes_retransmit=9 bytes_invalid=0 send_seq=2319 receive_seq=2319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999082  heater_bed: target=80 temp=62.4 pwm=0.700 sysload=0.28 cputime=2131.808 memavail=3583456 print_time=1233.992 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83118.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32798 bytes_read=198876 bytes_retransmit=9 bytes_invalid=0 send_seq=2322 receive_seq=2322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999080  heater_bed: target=80 temp=62.5 pwm=0.700 sysload=0.28 cputime=2131.838 memavail=3583460 print_time=1234.993 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83119.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32905 bytes_read=199062 bytes_retransmit=9 bytes_invalid=0 send_seq=2327 receive_seq=2327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999081  heater_bed: target=80 temp=62.7 pwm=0.700 sysload=0.28 cputime=2131.869 memavail=3583464 print_time=1235.993 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83120.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32949 bytes_read=199238 bytes_retransmit=9 bytes_invalid=0 send_seq=2330 receive_seq=2330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999081  heater_bed: target=80 temp=62.8 pwm=0.700 sysload=0.28 cputime=2131.897 memavail=3583372 print_time=1236.995 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83121.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=32993 bytes_read=199414 bytes_retransmit=9 bytes_invalid=0 send_seq=2333 receive_seq=2333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999079  heater_bed: target=80 temp=62.9 pwm=0.700 sysload=0.28 cputime=2131.927 memavail=3583484 print_time=1237.995 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83122.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=33037 bytes_read=199605 bytes_retransmit=9 bytes_invalid=0 send_seq=2336 receive_seq=2336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=63.1 pwm=0.700 sysload=0.26 cputime=2131.956 memavail=3583484 print_time=1238.996 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83123.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=33097 bytes_read=199784 bytes_retransmit=9 bytes_invalid=0 send_seq=2340 receive_seq=2340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=63.2 pwm=0.700 sysload=0.26 cputime=2131.986 memavail=3583484 print_time=1239.997 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83124.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=33141 bytes_read=199948 bytes_retransmit=9 bytes_invalid=0 send_seq=2343 receive_seq=2343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=63.3 pwm=0.700 sysload=0.26 cputime=2132.016 memavail=3583504 print_time=1240.997 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83125.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=33185 bytes_read=200120 bytes_retransmit=9 bytes_invalid=0 send_seq=2346 receive_seq=2346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999077  heater_bed: target=80 temp=63.5 pwm=0.700 sysload=0.26 cputime=2132.046 memavail=3583288 print_time=1241.998 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83126.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=33229 bytes_read=200296 bytes_retransmit=9 bytes_invalid=0 send_seq=2349 receive_seq=2349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999076  heater_bed: target=80 temp=63.6 pwm=0.700 sysload=0.26 cputime=2132.076 memavail=3583292 print_time=1242.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83127.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=33343 bytes_read=200502 bytes_retransmit=9 bytes_invalid=0 send_seq=2355 receive_seq=2355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999074  heater_bed: target=80 temp=63.7 pwm=0.700 sysload=0.24 cputime=2132.108 memavail=3583292 print_time=1243.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83128.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=33387 bytes_read=200678 bytes_retransmit=9 bytes_invalid=0 send_seq=2358 receive_seq=2358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=63.8 pwm=0.700 sysload=0.24 cputime=2132.136 memavail=3583304 print_time=1245.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 83129.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=33517 bytes_read=200864 bytes_retransmit=9 bytes_invalid=0 send_seq=2363 receive_seq=2363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=80 temp=64.0 pwm=0.700 sysload=0.24 cputime=2132.168 memavail=3583312 print_time=1246.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83130.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=33647 bytes_read=201050 bytes_retransmit=9 bytes_invalid=0 send_seq=2368 receive_seq=2368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=80 temp=64.1 pwm=0.700 sysload=0.24 cputime=2132.199 memavail=3584372 print_time=1247.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83131.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=33729 bytes_read=201226 bytes_retransmit=9 bytes_invalid=0 send_seq=2371 receive_seq=2371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=179999069  heater_bed: target=80 temp=64.2 pwm=0.700 sysload=0.24 cputime=2132.229 memavail=3584456 print_time=1248.002 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83132.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=33789 bytes_read=201422 bytes_retransmit=9 bytes_invalid=0 send_seq=2375 receive_seq=2375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=80 temp=64.3 pwm=0.700 sysload=0.22 cputime=2132.259 memavail=3584492 print_time=1249.003 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83133.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=33919 bytes_read=201608 bytes_retransmit=9 bytes_invalid=0 send_seq=2380 receive_seq=2380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=80 temp=64.4 pwm=0.700 sysload=0.22 cputime=2132.290 memavail=3584548 print_time=1250.003 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83134.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=34001 bytes_read=201784 bytes_retransmit=9 bytes_invalid=0 send_seq=2383 receive_seq=2383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=80 temp=64.6 pwm=0.700 sysload=0.22 cputime=2132.320 memavail=3584756 print_time=1251.004 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83135.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=34142 bytes_read=201975 bytes_retransmit=9 bytes_invalid=0 send_seq=2389 receive_seq=2389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=64.7 pwm=0.700 sysload=0.22 cputime=2132.353 memavail=3584716 print_time=1252.004 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83136.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=34256 bytes_read=202182 bytes_retransmit=9 bytes_invalid=0 send_seq=2396 receive_seq=2396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999086  heater_bed: target=80 temp=64.8 pwm=0.700 sysload=0.22 cputime=2132.386 memavail=3584868 print_time=1253.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83137.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=34386 bytes_read=202383 bytes_retransmit=9 bytes_invalid=0 send_seq=2401 receive_seq=2401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999082  heater_bed: target=80 temp=64.9 pwm=0.700 sysload=0.20 cputime=2132.418 memavail=3584912 print_time=1254.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83138.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=34521 bytes_read=202574 bytes_retransmit=9 bytes_invalid=0 send_seq=2407 receive_seq=2407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=65.1 pwm=0.700 sysload=0.20 cputime=2132.450 memavail=3584912 print_time=1255.006 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83139.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=34613 bytes_read=202760 bytes_retransmit=9 bytes_invalid=0 send_seq=2412 receive_seq=2412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=65.1 pwm=0.700 sysload=0.20 cputime=2132.479 memavail=3584924 print_time=1256.006 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83140.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=34716 bytes_read=202946 bytes_retransmit=9 bytes_invalid=0 send_seq=2417 receive_seq=2417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=80 temp=65.3 pwm=0.700 sysload=0.20 cputime=2132.511 memavail=3585844 print_time=1257.007 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83141.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=34808 bytes_read=203147 bytes_retransmit=9 bytes_invalid=0 send_seq=2422 receive_seq=2422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=65.4 pwm=0.700 sysload=0.20 cputime=2132.541 memavail=3585860 print_time=1258.008 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83142.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=34852 bytes_read=203323 bytes_retransmit=9 bytes_invalid=0 send_seq=2425 receive_seq=2425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=65.5 pwm=0.700 sysload=0.18 cputime=2132.571 memavail=3585864 print_time=1259.008 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83143.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=34935 bytes_read=203499 bytes_retransmit=9 bytes_invalid=0 send_seq=2428 receive_seq=2428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=65.6 pwm=0.700 sysload=0.18 cputime=2132.602 memavail=3585864 print_time=1260.009 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83144.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=34995 bytes_read=203695 bytes_retransmit=9 bytes_invalid=0 send_seq=2432 receive_seq=2432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=80 temp=65.7 pwm=0.700 sysload=0.18 cputime=2132.632 memavail=3585864 print_time=1261.010 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83145.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=35039 bytes_read=203856 bytes_retransmit=9 bytes_invalid=0 send_seq=2435 receive_seq=2435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=80 temp=65.8 pwm=0.700 sysload=0.18 cputime=2132.660 memavail=3585872 print_time=1262.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83146.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=35083 bytes_read=204032 bytes_retransmit=9 bytes_invalid=0 send_seq=2438 receive_seq=2438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=66.0 pwm=0.700 sysload=0.18 cputime=2132.689 memavail=3585872 print_time=1263.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83147.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=35127 bytes_read=204234 bytes_retransmit=9 bytes_invalid=0 send_seq=2441 receive_seq=2441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=80 temp=66.1 pwm=0.700 sysload=0.17 cputime=2132.718 memavail=3585908 print_time=1264.012 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83148.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=35268 bytes_read=204395 bytes_retransmit=9 bytes_invalid=0 send_seq=2446 receive_seq=2446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=80 temp=66.2 pwm=0.700 sysload=0.17 cputime=2132.750 memavail=3585812 print_time=1265.012 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83149.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=35312 bytes_read=204569 bytes_retransmit=9 bytes_invalid=0 send_seq=2449 receive_seq=2449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=80 temp=66.4 pwm=0.700 sysload=0.17 cputime=2132.780 memavail=3585828 print_time=1266.012 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83150.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=35356 bytes_read=204760 bytes_retransmit=9 bytes_invalid=0 send_seq=2452 receive_seq=2452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=80 temp=66.4 pwm=0.700 sysload=0.17 cputime=2132.809 memavail=3585084 print_time=1267.013 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83151.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=35486 bytes_read=204931 bytes_retransmit=9 bytes_invalid=0 send_seq=2457 receive_seq=2457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=80 temp=66.5 pwm=0.700 sysload=0.17 cputime=2132.840 memavail=3585084 print_time=1268.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83152.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=35584 bytes_read=205132 bytes_retransmit=9 bytes_invalid=0 send_seq=2462 receive_seq=2462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=179999064  heater_bed: target=80 temp=66.7 pwm=0.700 sysload=0.24 cputime=2132.872 memavail=3584964 print_time=1269.015 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83153.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=35644 bytes_read=205328 bytes_retransmit=9 bytes_invalid=0 send_seq=2466 receive_seq=2466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=80 temp=66.8 pwm=0.700 sysload=0.24 cputime=2132.903 memavail=3584844 print_time=1270.016 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83154.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=35688 bytes_read=205489 bytes_retransmit=9 bytes_invalid=0 send_seq=2469 receive_seq=2469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=80 temp=66.9 pwm=0.700 sysload=0.24 cputime=2132.932 memavail=3584724 print_time=1271.016 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83155.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=35732 bytes_read=205665 bytes_retransmit=9 bytes_invalid=0 send_seq=2472 receive_seq=2472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999063  heater_bed: target=80 temp=67.0 pwm=0.700 sysload=0.24 cputime=2132.961 memavail=3584612 print_time=1272.017 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83156.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=35776 bytes_read=205856 bytes_retransmit=9 bytes_invalid=0 send_seq=2475 receive_seq=2475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=80 temp=67.1 pwm=0.700 sysload=0.24 cputime=2132.993 memavail=3584612 print_time=1273.017 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83157.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=35836 bytes_read=206037 bytes_retransmit=9 bytes_invalid=0 send_seq=2479 receive_seq=2479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=67.2 pwm=0.700 sysload=0.22 cputime=2133.024 memavail=3584532 print_time=1274.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83158.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=35880 bytes_read=206213 bytes_retransmit=9 bytes_invalid=0 send_seq=2482 receive_seq=2482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999095  heater_bed: target=80 temp=67.3 pwm=0.700 sysload=0.22 cputime=2133.053 memavail=3584540 print_time=1275.019 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83159.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=35919 bytes_read=206399 bytes_retransmit=9 bytes_invalid=0 send_seq=2484 receive_seq=2484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999094  heater_bed: target=80 temp=67.5 pwm=0.700 sysload=0.22 cputime=2133.082 memavail=3584548 print_time=1276.020 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83160.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=35963 bytes_read=206560 bytes_retransmit=9 bytes_invalid=0 send_seq=2487 receive_seq=2487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999090  heater_bed: target=80 temp=67.6 pwm=0.700 sysload=0.22 cputime=2133.113 memavail=3583552 print_time=1277.021 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 83161.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=36077 bytes_read=206751 bytes_retransmit=9 bytes_invalid=0 send_seq=2493 receive_seq=2493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999086  heater_bed: target=80 temp=67.7 pwm=0.700 sysload=0.22 cputime=2133.144 memavail=3583564 print_time=1278.021 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83162.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=36121 bytes_read=206957 bytes_retransmit=9 bytes_invalid=0 send_seq=2496 receive_seq=2496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999084  heater_bed: target=80 temp=67.8 pwm=0.700 sysload=0.20 cputime=2133.174 memavail=3583568 print_time=1279.021 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83163.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=36165 bytes_read=207118 bytes_retransmit=9 bytes_invalid=0 send_seq=2499 receive_seq=2499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999082  heater_bed: target=80 temp=67.9 pwm=0.700 sysload=0.20 cputime=2133.203 memavail=3583576 print_time=1280.023 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83164.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=36258 bytes_read=207304 bytes_retransmit=9 bytes_invalid=0 send_seq=2504 receive_seq=2504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999080  heater_bed: target=80 temp=68.0 pwm=0.700 sysload=0.20 cputime=2133.234 memavail=3583644 print_time=1281.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83165.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=36318 bytes_read=207500 bytes_retransmit=9 bytes_invalid=0 send_seq=2508 receive_seq=2508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=68.1 pwm=0.700 sysload=0.20 cputime=2133.264 memavail=3583656 print_time=1282.027 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83166.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=36362 bytes_read=207661 bytes_retransmit=9 bytes_invalid=0 send_seq=2511 receive_seq=2511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999074  heater_bed: target=80 temp=68.2 pwm=0.700 sysload=0.20 cputime=2133.293 memavail=3583572 print_time=1283.027 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83167.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=36406 bytes_read=207867 bytes_retransmit=9 bytes_invalid=0 send_seq=2514 receive_seq=2514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999074  heater_bed: target=80 temp=68.4 pwm=0.700 sysload=0.26 cputime=2133.324 memavail=3583572 print_time=1284.028 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 83168.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=36450 bytes_read=208043 bytes_retransmit=9 bytes_invalid=0 send_seq=2517 receive_seq=2517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=68.5 pwm=0.700 sysload=0.26 cputime=2133.353 memavail=3583580 print_time=1285.030 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83169.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=36510 bytes_read=208209 bytes_retransmit=9 bytes_invalid=0 send_seq=2521 receive_seq=2521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=80 temp=68.6 pwm=0.700 sysload=0.26 cputime=2133.384 memavail=3583592 print_time=1286.031 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83170.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=36597 bytes_read=208405 bytes_retransmit=9 bytes_invalid=0 send_seq=2525 receive_seq=2525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=68.7 pwm=0.700 sysload=0.26 cputime=2133.416 memavail=3583604 print_time=1287.032 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83171.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=36641 bytes_read=208575 bytes_retransmit=9 bytes_invalid=0 send_seq=2528 receive_seq=2528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=80 temp=68.8 pwm=0.700 sysload=0.26 cputime=2133.446 memavail=3583612 print_time=1288.033 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83172.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=36685 bytes_read=208741 bytes_retransmit=9 bytes_invalid=0 send_seq=2531 receive_seq=2531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=80 temp=68.9 pwm=0.700 sysload=0.24 cputime=2133.476 memavail=3583616 print_time=1289.033 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83173.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=36740 bytes_read=208932 bytes_retransmit=9 bytes_invalid=0 send_seq=2534 receive_seq=2534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=80 temp=69.0 pwm=0.700 sysload=0.24 cputime=2133.506 memavail=3583504 print_time=1290.035 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83174.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=36784 bytes_read=209108 bytes_retransmit=9 bytes_invalid=0 send_seq=2537 receive_seq=2537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=69.1 pwm=0.700 sysload=0.24 cputime=2133.537 memavail=3583256 print_time=1291.036 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83175.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=36828 bytes_read=209269 bytes_retransmit=9 bytes_invalid=0 send_seq=2540 receive_seq=2540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=69.2 pwm=0.700 sysload=0.24 cputime=2133.568 memavail=3583276 print_time=1292.039 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83176.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=36872 bytes_read=209460 bytes_retransmit=9 bytes_invalid=0 send_seq=2543 receive_seq=2543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=80 temp=69.4 pwm=0.700 sysload=0.24 cputime=2133.601 memavail=3583284 print_time=1293.039 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83177.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=36916 bytes_read=209651 bytes_retransmit=9 bytes_invalid=0 send_seq=2546 receive_seq=2546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=80 temp=69.4 pwm=0.700 sysload=0.30 cputime=2133.632 memavail=3583288 print_time=1294.040 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83178.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=36976 bytes_read=209817 bytes_retransmit=9 bytes_invalid=0 send_seq=2550 receive_seq=2550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=69.6 pwm=0.700 sysload=0.30 cputime=2133.663 memavail=3583296 print_time=1295.041 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83179.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=37088 bytes_read=210018 bytes_retransmit=9 bytes_invalid=0 send_seq=2555 receive_seq=2555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=80 temp=69.7 pwm=0.700 sysload=0.30 cputime=2133.697 memavail=3583300 print_time=1296.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83180.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=37132 bytes_read=210194 bytes_retransmit=9 bytes_invalid=0 send_seq=2558 receive_seq=2558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=69.8 pwm=0.700 sysload=0.30 cputime=2133.722 memavail=3584324 print_time=1297.045 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83181.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=37176 bytes_read=210355 bytes_retransmit=9 bytes_invalid=0 send_seq=2561 receive_seq=2561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=80 temp=69.9 pwm=0.700 sysload=0.30 cputime=2133.747 memavail=3584328 print_time=1298.045 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83182.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=37236 bytes_read=210566 bytes_retransmit=9 bytes_invalid=0 send_seq=2565 receive_seq=2565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=80 temp=70.0 pwm=0.700 sysload=0.28 cputime=2133.777 memavail=3584336 print_time=1299.046 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83183.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=37280 bytes_read=210742 bytes_retransmit=9 bytes_invalid=0 send_seq=2568 receive_seq=2568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=80 temp=70.1 pwm=0.700 sysload=0.28 cputime=2133.806 memavail=3584340 print_time=1300.047 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83184.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=37324 bytes_read=210903 bytes_retransmit=9 bytes_invalid=0 send_seq=2571 receive_seq=2571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=80 temp=70.2 pwm=0.700 sysload=0.28 cputime=2133.834 memavail=3584344 print_time=1301.048 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83185.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=37368 bytes_read=211094 bytes_retransmit=9 bytes_invalid=0 send_seq=2574 receive_seq=2574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=80 temp=70.3 pwm=0.700 sysload=0.28 cputime=2133.866 memavail=3584224 print_time=1302.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83186.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=37428 bytes_read=211275 bytes_retransmit=9 bytes_invalid=0 send_seq=2578 receive_seq=2578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=80 temp=70.4 pwm=0.700 sysload=0.28 cputime=2133.897 memavail=3584104 print_time=1303.053 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83187.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=37472 bytes_read=211451 bytes_retransmit=9 bytes_invalid=0 send_seq=2581 receive_seq=2581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=70.5 pwm=0.700 sysload=0.34 cputime=2133.927 memavail=3584128 print_time=1304.053 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83188.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=37570 bytes_read=211652 bytes_retransmit=9 bytes_invalid=0 send_seq=2586 receive_seq=2586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=80 temp=70.7 pwm=0.700 sysload=0.34 cputime=2133.959 memavail=3584008 print_time=1305.056 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83189.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=37614 bytes_read=211828 bytes_retransmit=9 bytes_invalid=0 send_seq=2589 receive_seq=2589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=80 temp=70.8 pwm=0.700 sysload=0.34 cputime=2133.989 memavail=3584016 print_time=1306.057 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83190.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=37674 bytes_read=211994 bytes_retransmit=9 bytes_invalid=0 send_seq=2593 receive_seq=2593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=70.9 pwm=0.700 sysload=0.34 cputime=2134.019 memavail=3583516 print_time=1307.058 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83191.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=37718 bytes_read=212185 bytes_retransmit=9 bytes_invalid=0 send_seq=2596 receive_seq=2596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=71.0 pwm=0.700 sysload=0.34 cputime=2134.050 memavail=3583540 print_time=1308.059 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83192.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=37762 bytes_read=212376 bytes_retransmit=9 bytes_invalid=0 send_seq=2599 receive_seq=2599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=80 temp=71.1 pwm=0.700 sysload=0.31 cputime=2134.081 memavail=3583544 print_time=1309.059 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83193.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=37806 bytes_read=212537 bytes_retransmit=9 bytes_invalid=0 send_seq=2602 receive_seq=2602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=80 temp=71.2 pwm=0.700 sysload=0.31 cputime=2134.112 memavail=3583564 print_time=1310.062 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83194.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=37861 bytes_read=212728 bytes_retransmit=9 bytes_invalid=0 send_seq=2605 receive_seq=2605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=80 temp=71.3 pwm=0.700 sysload=0.31 cputime=2134.144 memavail=3583568 print_time=1311.062 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83195.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=37905 bytes_read=212897 bytes_retransmit=9 bytes_invalid=0 send_seq=2608 receive_seq=2608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=80 temp=71.5 pwm=0.700 sysload=0.31 cputime=2134.174 memavail=3583584 print_time=1312.064 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83196.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=37949 bytes_read=213049 bytes_retransmit=9 bytes_invalid=0 send_seq=2611 receive_seq=2611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=80 temp=71.6 pwm=0.700 sysload=0.31 cputime=2134.205 memavail=3583468 print_time=1313.065 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83197.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38053 bytes_read=213280 bytes_retransmit=9 bytes_invalid=0 send_seq=2617 receive_seq=2617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=80 temp=71.7 pwm=0.700 sysload=0.37 cputime=2134.240 memavail=3583472 print_time=1314.067 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83198.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38097 bytes_read=213456 bytes_retransmit=9 bytes_invalid=0 send_seq=2620 receive_seq=2620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=80 temp=71.8 pwm=0.700 sysload=0.37 cputime=2134.272 memavail=3583480 print_time=1315.069 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 83199.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38152 bytes_read=213617 bytes_retransmit=9 bytes_invalid=0 send_seq=2623 receive_seq=2623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=71.9 pwm=0.700 sysload=0.37 cputime=2134.302 memavail=3583484 print_time=1316.071 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83200.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38196 bytes_read=213808 bytes_retransmit=9 bytes_invalid=0 send_seq=2626 receive_seq=2626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=72.1 pwm=0.700 sysload=0.37 cputime=2134.334 memavail=3583248 print_time=1317.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83201.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38240 bytes_read=213984 bytes_retransmit=9 bytes_invalid=0 send_seq=2629 receive_seq=2629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999052  heater_bed: target=80 temp=72.1 pwm=0.700 sysload=0.37 cputime=2134.366 memavail=3583252 print_time=1318.075 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83202.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38284 bytes_read=214160 bytes_retransmit=9 bytes_invalid=0 send_seq=2632 receive_seq=2632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999052  heater_bed: target=80 temp=72.3 pwm=0.700 sysload=0.34 cputime=2134.396 memavail=3583256 print_time=1319.078 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83203.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38344 bytes_read=214356 bytes_retransmit=9 bytes_invalid=0 send_seq=2636 receive_seq=2636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=80 temp=72.4 pwm=0.700 sysload=0.34 cputime=2134.426 memavail=3583264 print_time=1320.081 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83204.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38388 bytes_read=214532 bytes_retransmit=9 bytes_invalid=0 send_seq=2639 receive_seq=2639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999053  heater_bed: target=80 temp=72.5 pwm=0.700 sysload=0.34 cputime=2134.456 memavail=3583280 print_time=1321.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83205.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38479 bytes_read=214698 bytes_retransmit=9 bytes_invalid=0 send_seq=2643 receive_seq=2643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=72.6 pwm=0.700 sysload=0.34 cputime=2134.487 memavail=3583284 print_time=1322.082 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83206.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=38523 bytes_read=214889 bytes_retransmit=9 bytes_invalid=0 send_seq=2646 receive_seq=2646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999049  heater_bed: target=80 temp=72.8 pwm=0.700 sysload=0.34 cputime=2134.517 memavail=3583292 print_time=1323.082 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83207.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=38583 bytes_read=215085 bytes_retransmit=9 bytes_invalid=0 send_seq=2650 receive_seq=2650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=80 temp=72.9 pwm=0.700 sysload=0.31 cputime=2134.546 memavail=3583292 print_time=1324.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.9 pwm=0.000
Stats 83208.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=38627 bytes_read=215246 bytes_retransmit=9 bytes_invalid=0 send_seq=2653 receive_seq=2653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=73.0 pwm=0.700 sysload=0.31 cputime=2134.575 memavail=3583300 print_time=1325.085 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83209.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=38671 bytes_read=215437 bytes_retransmit=9 bytes_invalid=0 send_seq=2656 receive_seq=2656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=80 temp=73.1 pwm=0.700 sysload=0.31 cputime=2134.605 memavail=3583200 print_time=1326.087 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83210.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=38715 bytes_read=215613 bytes_retransmit=9 bytes_invalid=0 send_seq=2659 receive_seq=2659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=80 temp=73.2 pwm=0.700 sysload=0.31 cputime=2134.630 memavail=3583208 print_time=1327.089 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83211.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=38775 bytes_read=215779 bytes_retransmit=9 bytes_invalid=0 send_seq=2663 receive_seq=2663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=73.3 pwm=0.700 sysload=0.31 cputime=2134.653 memavail=3583208 print_time=1328.090 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83212.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=38819 bytes_read=215985 bytes_retransmit=9 bytes_invalid=0 send_seq=2666 receive_seq=2666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=80 temp=73.5 pwm=0.700 sysload=0.28 cputime=2134.683 memavail=3583216 print_time=1329.092 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83213.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=38912 bytes_read=216166 bytes_retransmit=9 bytes_invalid=0 send_seq=2670 receive_seq=2670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999052  heater_bed: target=80 temp=73.6 pwm=0.700 sysload=0.28 cputime=2134.713 memavail=3583220 print_time=1330.093 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83214.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=38956 bytes_read=216327 bytes_retransmit=9 bytes_invalid=0 send_seq=2673 receive_seq=2673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=73.7 pwm=0.700 sysload=0.28 cputime=2134.743 memavail=3583236 print_time=1331.097 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83215.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=39016 bytes_read=216523 bytes_retransmit=9 bytes_invalid=0 send_seq=2677 receive_seq=2677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=80 temp=73.8 pwm=0.700 sysload=0.28 cputime=2134.774 memavail=3583240 print_time=1332.098 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83216.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=39060 bytes_read=216699 bytes_retransmit=9 bytes_invalid=0 send_seq=2680 receive_seq=2680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=80 temp=74.0 pwm=0.700 sysload=0.28 cputime=2134.804 memavail=3583244 print_time=1333.098 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83217.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=39099 bytes_read=216870 bytes_retransmit=9 bytes_invalid=0 send_seq=2682 receive_seq=2682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=74.1 pwm=0.700 sysload=0.26 cputime=2134.833 memavail=3583256 print_time=1334.099 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83218.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=39143 bytes_read=217061 bytes_retransmit=9 bytes_invalid=0 send_seq=2685 receive_seq=2685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=80 temp=74.2 pwm=0.700 sysload=0.26 cputime=2134.864 memavail=3583268 print_time=1335.102 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83219.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=39187 bytes_read=217227 bytes_retransmit=9 bytes_invalid=0 send_seq=2688 receive_seq=2688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=74.3 pwm=0.700 sysload=0.26 cputime=2134.894 memavail=3583268 print_time=1336.103 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83220.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=39247 bytes_read=217386 bytes_retransmit=9 bytes_invalid=0 send_seq=2692 receive_seq=2692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=80 temp=74.4 pwm=0.700 sysload=0.26 cputime=2134.919 memavail=3583172 print_time=1337.104 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83221.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=39291 bytes_read=217577 bytes_retransmit=9 bytes_invalid=0 send_seq=2695 receive_seq=2695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999053  heater_bed: target=80 temp=74.5 pwm=0.700 sysload=0.26 cputime=2134.950 memavail=3583076 print_time=1338.105 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83222.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=39384 bytes_read=217773 bytes_retransmit=9 bytes_invalid=0 send_seq=2699 receive_seq=2699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=80 temp=74.6 pwm=0.700 sysload=0.24 cputime=2134.980 memavail=3583084 print_time=1339.107 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83223.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=39428 bytes_read=217949 bytes_retransmit=9 bytes_invalid=0 send_seq=2702 receive_seq=2702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=80 temp=74.8 pwm=0.700 sysload=0.24 cputime=2135.010 memavail=3583092 print_time=1340.109 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83224.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=39542 bytes_read=218140 bytes_retransmit=9 bytes_invalid=0 send_seq=2708 receive_seq=2708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.24 cputime=2135.040 memavail=3583096 print_time=1341.111 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83225.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=39586 bytes_read=218316 bytes_retransmit=9 bytes_invalid=0 send_seq=2711 receive_seq=2711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.24 cputime=2135.069 memavail=3583112 print_time=1342.113 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83226.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=39630 bytes_read=218492 bytes_retransmit=9 bytes_invalid=0 send_seq=2714 receive_seq=2714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.24 cputime=2135.098 memavail=3583116 print_time=1343.114 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Heater heater_bed within range of 80.000
Stats 83227.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=39674 bytes_read=218683 bytes_retransmit=9 bytes_invalid=0 send_seq=2717 receive_seq=2717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.22 cputime=2135.128 memavail=3583128 print_time=1344.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83228.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=39734 bytes_read=218864 bytes_retransmit=9 bytes_invalid=0 send_seq=2721 receive_seq=2721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999054  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.22 cputime=2135.157 memavail=3583008 print_time=1345.116 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83229.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=39778 bytes_read=219040 bytes_retransmit=9 bytes_invalid=0 send_seq=2724 receive_seq=2724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.22 cputime=2135.188 memavail=3582916 print_time=1346.119 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83230.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=39822 bytes_read=219216 bytes_retransmit=9 bytes_invalid=0 send_seq=2727 receive_seq=2727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999054  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.22 cputime=2135.217 memavail=3582720 print_time=1347.119 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83231.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=39910 bytes_read=219397 bytes_retransmit=9 bytes_invalid=0 send_seq=2731 receive_seq=2731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999053  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.22 cputime=2135.248 memavail=3582724 print_time=1348.121 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83232.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=39970 bytes_read=219593 bytes_retransmit=9 bytes_invalid=0 send_seq=2735 receive_seq=2735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=75.7 pwm=0.700 sysload=0.20 cputime=2135.278 memavail=3582728 print_time=1349.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83233.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=40014 bytes_read=219769 bytes_retransmit=9 bytes_invalid=0 send_seq=2738 receive_seq=2738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=80 temp=75.8 pwm=0.700 sysload=0.20 cputime=2135.307 memavail=3582608 print_time=1350.125 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 83234.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=40058 bytes_read=219945 bytes_retransmit=9 bytes_invalid=0 send_seq=2741 receive_seq=2741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999049  heater_bed: target=80 temp=75.9 pwm=0.700 sysload=0.20 cputime=2135.337 memavail=3582608 print_time=1351.126 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83235.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=40078 bytes_read=220116 bytes_retransmit=9 bytes_invalid=0 send_seq=2743 receive_seq=2743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=76.1 pwm=0.700 sysload=0.20 cputime=2135.367 memavail=3582520 print_time=1352.127 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 83236.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=40138 bytes_read=220297 bytes_retransmit=9 bytes_invalid=0 send_seq=2747 receive_seq=2747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999055  heater_bed: target=80 temp=76.2 pwm=0.700 sysload=0.20 cputime=2135.397 memavail=3582524 print_time=1353.129 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83237.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=40182 bytes_read=220488 bytes_retransmit=9 bytes_invalid=0 send_seq=2750 receive_seq=2750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999054  heater_bed: target=80 temp=76.2 pwm=0.700 sysload=0.19 cputime=2135.427 memavail=3582528 print_time=1354.132 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83238.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=40220 bytes_read=220664 bytes_retransmit=9 bytes_invalid=0 send_seq=2753 receive_seq=2753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999054  heater_bed: target=80 temp=76.4 pwm=0.700 sysload=0.19 cputime=2135.456 memavail=3582532 print_time=1355.133 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83239.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=40270 bytes_read=220840 bytes_retransmit=9 bytes_invalid=0 send_seq=2756 receive_seq=2756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999054  heater_bed: target=80 temp=76.5 pwm=0.700 sysload=0.19 cputime=2135.486 memavail=3582536 print_time=1356.135 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83240.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=40308 bytes_read=221016 bytes_retransmit=9 bytes_invalid=0 send_seq=2759 receive_seq=2759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999054  heater_bed: target=80 temp=76.6 pwm=0.700 sysload=0.19 cputime=2135.514 memavail=3583252 print_time=1357.135 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83241.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=40422 bytes_read=221207 bytes_retransmit=9 bytes_invalid=0 send_seq=2765 receive_seq=2765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999053  heater_bed: target=80 temp=76.7 pwm=0.700 sysload=0.19 cputime=2135.547 memavail=3583316 print_time=1358.140 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83242.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=40472 bytes_read=221398 bytes_retransmit=9 bytes_invalid=0 send_seq=2768 receive_seq=2768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.17 cputime=2135.576 memavail=3583324 print_time=1359.140 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83243.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=40510 bytes_read=221564 bytes_retransmit=9 bytes_invalid=0 send_seq=2771 receive_seq=2771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999050  heater_bed: target=80 temp=76.9 pwm=0.700 sysload=0.17 cputime=2135.606 memavail=3583324 print_time=1360.141 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83244.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=40554 bytes_read=221734 bytes_retransmit=9 bytes_invalid=0 send_seq=2774 receive_seq=2774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999048  heater_bed: target=80 temp=77.0 pwm=0.700 sysload=0.17 cputime=2135.636 memavail=3583332 print_time=1361.142 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83245.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=40614 bytes_read=221915 bytes_retransmit=9 bytes_invalid=0 send_seq=2778 receive_seq=2778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999047  heater_bed: target=80 temp=77.1 pwm=0.700 sysload=0.17 cputime=2135.664 memavail=3583344 print_time=1362.143 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83246.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=40658 bytes_read=222091 bytes_retransmit=9 bytes_invalid=0 send_seq=2781 receive_seq=2781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999047  heater_bed: target=80 temp=77.2 pwm=0.700 sysload=0.17 cputime=2135.693 memavail=3583356 print_time=1363.144 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83247.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=40702 bytes_read=222282 bytes_retransmit=9 bytes_invalid=0 send_seq=2784 receive_seq=2784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999049  heater_bed: target=80 temp=77.3 pwm=0.700 sysload=0.16 cputime=2135.723 memavail=3583360 print_time=1364.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83248.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=40746 bytes_read=222458 bytes_retransmit=9 bytes_invalid=0 send_seq=2787 receive_seq=2787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999050  heater_bed: target=80 temp=77.4 pwm=0.700 sysload=0.16 cputime=2135.752 memavail=3583368 print_time=1365.148 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83249.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=40930 bytes_read=222649 bytes_retransmit=9 bytes_invalid=0 send_seq=2793 receive_seq=2793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=179999047  heater_bed: target=80 temp=77.5 pwm=0.700 sysload=0.16 cputime=2135.785 memavail=3583376 print_time=1366.151 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83250.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=41040 bytes_read=222825 bytes_retransmit=9 bytes_invalid=0 send_seq=2797 receive_seq=2796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999045  heater_bed: target=80 temp=77.6 pwm=0.700 sysload=0.16 cputime=2135.815 memavail=3583144 print_time=1367.151 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83251.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=41075 bytes_read=223006 bytes_retransmit=9 bytes_invalid=0 send_seq=2800 receive_seq=2800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999043  heater_bed: target=80 temp=77.7 pwm=0.700 sysload=0.16 cputime=2135.845 memavail=3583148 print_time=1368.153 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83252.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=41183 bytes_read=223197 bytes_retransmit=9 bytes_invalid=0 send_seq=2804 receive_seq=2803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=179999043  heater_bed: target=80 temp=77.8 pwm=0.700 sysload=0.14 cputime=2135.875 memavail=3583160 print_time=1369.154 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83253.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=41304 bytes_read=223393 bytes_retransmit=9 bytes_invalid=0 send_seq=2810 receive_seq=2810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999042  heater_bed: target=80 temp=77.9 pwm=0.700 sysload=0.14 cputime=2135.907 memavail=3583164 print_time=1370.157 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83254.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=41348 bytes_read=223569 bytes_retransmit=9 bytes_invalid=0 send_seq=2813 receive_seq=2813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999045  heater_bed: target=80 temp=78.0 pwm=0.700 sysload=0.14 cputime=2135.936 memavail=3583164 print_time=1371.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83255.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=41586 bytes_read=223765 bytes_retransmit=9 bytes_invalid=0 send_seq=2820 receive_seq=2820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999044  heater_bed: target=80 temp=78.1 pwm=0.700 sysload=0.14 cputime=2135.968 memavail=3583184 print_time=1372.162 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83256.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=41630 bytes_read=223941 bytes_retransmit=9 bytes_invalid=0 send_seq=2823 receive_seq=2823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999043  heater_bed: target=80 temp=78.2 pwm=0.700 sysload=0.14 cputime=2135.997 memavail=3583196 print_time=1373.162 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83257.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=41684 bytes_read=224137 bytes_retransmit=9 bytes_invalid=0 send_seq=2827 receive_seq=2827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=84 freq=179999044  heater_bed: target=80 temp=78.3 pwm=0.700 sysload=0.13 cputime=2136.027 memavail=3583196 print_time=1374.163 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83258.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=41866 bytes_read=224339 bytes_retransmit=9 bytes_invalid=0 send_seq=2833 receive_seq=2833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999119  heater_bed: target=80 temp=78.4 pwm=0.700 sysload=0.13 cputime=2136.058 memavail=3583208 print_time=1375.164 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 83259.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=41997 bytes_read=224525 bytes_retransmit=9 bytes_invalid=0 send_seq=2838 receive_seq=2838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=78.5 pwm=0.700 sysload=0.13 cputime=2136.090 memavail=3583212 print_time=1376.166 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83260.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=42080 bytes_read=224716 bytes_retransmit=9 bytes_invalid=0 send_seq=2841 receive_seq=2841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=179999110  heater_bed: target=80 temp=78.6 pwm=0.700 sysload=0.13 cputime=2136.120 memavail=3582856 print_time=1377.167 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83261.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=42162 bytes_read=224877 bytes_retransmit=9 bytes_invalid=0 send_seq=2844 receive_seq=2844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=78.7 pwm=0.700 sysload=0.13 cputime=2136.148 memavail=3582864 print_time=1378.167 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83262.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=42216 bytes_read=225073 bytes_retransmit=9 bytes_invalid=0 send_seq=2848 receive_seq=2848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=78.8 pwm=0.700 sysload=0.20 cputime=2136.180 memavail=3582996 print_time=1379.169 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83263.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=42266 bytes_read=225264 bytes_retransmit=9 bytes_invalid=0 send_seq=2851 receive_seq=2851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=80 temp=78.9 pwm=0.700 sysload=0.20 cputime=2136.212 memavail=3583004 print_time=1380.170 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83264.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=42304 bytes_read=225425 bytes_retransmit=9 bytes_invalid=0 send_seq=2854 receive_seq=2854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999093  heater_bed: target=80 temp=79.0 pwm=0.700 sysload=0.20 cputime=2136.241 memavail=3583136 print_time=1381.172 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83265.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=42348 bytes_read=225601 bytes_retransmit=9 bytes_invalid=0 send_seq=2857 receive_seq=2857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999089  heater_bed: target=80 temp=79.1 pwm=0.700 sysload=0.20 cputime=2136.270 memavail=3583140 print_time=1382.174 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 83266.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000026 bytes_write=42408 bytes_read=225794 bytes_retransmit=9 bytes_invalid=0 send_seq=2861 receive_seq=2861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999086  heater_bed: target=80 temp=79.2 pwm=0.700 sysload=0.20 cputime=2136.300 memavail=3583148 print_time=1383.175 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83267.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=42458 bytes_read=225960 bytes_retransmit=9 bytes_invalid=0 send_seq=2864 receive_seq=2864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999082  heater_bed: target=80 temp=79.3 pwm=0.700 sysload=0.27 cputime=2136.331 memavail=3583156 print_time=1384.176 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83268.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=42502 bytes_read=226133 bytes_retransmit=9 bytes_invalid=0 send_seq=2867 receive_seq=2867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=79.4 pwm=0.700 sysload=0.27 cputime=2136.360 memavail=3583036 print_time=1385.178 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83270.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=42546 bytes_read=226324 bytes_retransmit=9 bytes_invalid=0 send_seq=2870 receive_seq=2870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=79.5 pwm=0.700 sysload=0.27 cputime=2136.391 memavail=3583044 print_time=1386.180 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83271.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=42670 bytes_read=226490 bytes_retransmit=9 bytes_invalid=0 send_seq=2875 receive_seq=2874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=179999070  heater_bed: target=80 temp=79.6 pwm=0.700 sysload=0.27 cputime=2136.420 memavail=3582440 print_time=1387.181 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83272.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=42713 bytes_read=226671 bytes_retransmit=9 bytes_invalid=0 send_seq=2878 receive_seq=2878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999063  heater_bed: target=80 temp=79.7 pwm=0.700 sysload=0.27 cputime=2136.448 memavail=3582324 print_time=1388.183 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83273.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=42757 bytes_read=226877 bytes_retransmit=9 bytes_invalid=0 send_seq=2881 receive_seq=2881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=79.8 pwm=0.700 sysload=0.41 cputime=2136.477 memavail=3582216 print_time=1389.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83274.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=42801 bytes_read=227038 bytes_retransmit=9 bytes_invalid=0 send_seq=2884 receive_seq=2884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999059  heater_bed: target=80 temp=79.9 pwm=0.700 sysload=0.41 cputime=2136.505 memavail=3582224 print_time=1390.186 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83275.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=42992 bytes_read=227244 bytes_retransmit=9 bytes_invalid=0 send_seq=2891 receive_seq=2890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.41 cputime=2136.538 memavail=3582228 print_time=1391.188 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83276.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=43038 bytes_read=227425 bytes_retransmit=9 bytes_invalid=0 send_seq=2894 receive_seq=2894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999054  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.41 cputime=2136.567 memavail=3582116 print_time=1392.190 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83277.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=43082 bytes_read=227586 bytes_retransmit=9 bytes_invalid=0 send_seq=2897 receive_seq=2897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999053  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.41 cputime=2136.598 memavail=3582124 print_time=1393.191 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83278.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=43126 bytes_read=227792 bytes_retransmit=9 bytes_invalid=0 send_seq=2900 receive_seq=2900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999052  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.37 cputime=2136.628 memavail=3582004 print_time=1394.193 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83279.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=43170 bytes_read=227968 bytes_retransmit=9 bytes_invalid=0 send_seq=2903 receive_seq=2903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999052  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.37 cputime=2136.658 memavail=3582008 print_time=1395.195 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83280.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=43214 bytes_read=228129 bytes_retransmit=9 bytes_invalid=0 send_seq=2906 receive_seq=2906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999050  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.37 cputime=2136.688 memavail=3582036 print_time=1396.197 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83281.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=43258 bytes_read=228320 bytes_retransmit=9 bytes_invalid=0 send_seq=2909 receive_seq=2909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999048  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.37 cputime=2136.717 memavail=3582192 print_time=1397.199 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83282.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=43296 bytes_read=228496 bytes_retransmit=9 bytes_invalid=0 send_seq=2912 receive_seq=2912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.37 cputime=2136.748 memavail=3582200 print_time=1398.202 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83283.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=43340 bytes_read=228672 bytes_retransmit=9 bytes_invalid=0 send_seq=2915 receive_seq=2915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.34 cputime=2136.778 memavail=3582204 print_time=1399.203 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Write g-code response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/gcode.py", line 446, in _respond_raw
    os.write(self.fd, (msg+"\n").encode())
OSError: [Errno 11] Resource temporarily unavailable
Stats 83284.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=43384 bytes_read=228863 bytes_retransmit=9 bytes_invalid=0 send_seq=2918 receive_seq=2918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999092  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.34 cputime=2136.810 memavail=3582228 print_time=1400.203 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83285.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=43609 bytes_read=229059 bytes_retransmit=9 bytes_invalid=0 send_seq=2925 receive_seq=2925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999086  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.34 cputime=2136.846 memavail=3582232 print_time=1401.207 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83286.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=43638 bytes_read=229220 bytes_retransmit=9 bytes_invalid=0 send_seq=2928 receive_seq=2928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999082  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.34 cputime=2136.876 memavail=3582240 print_time=1402.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83287.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=43688 bytes_read=229411 bytes_retransmit=9 bytes_invalid=0 send_seq=2931 receive_seq=2931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.34 cputime=2136.906 memavail=3582148 print_time=1403.209 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83288.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=43795 bytes_read=229607 bytes_retransmit=9 bytes_invalid=0 send_seq=2935 receive_seq=2935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999076  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.31 cputime=2136.939 memavail=3582156 print_time=1404.210 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83289.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=43902 bytes_read=229773 bytes_retransmit=9 bytes_invalid=0 send_seq=2939 receive_seq=2939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999072  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.31 cputime=2136.972 memavail=3582172 print_time=1405.210 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83290.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=43946 bytes_read=229964 bytes_retransmit=9 bytes_invalid=0 send_seq=2942 receive_seq=2942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.31 cputime=2137.001 memavail=3582172 print_time=1406.211 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 83291.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=43990 bytes_read=230137 bytes_retransmit=9 bytes_invalid=0 send_seq=2945 receive_seq=2945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999074  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.31 cputime=2137.031 memavail=3582184 print_time=1407.212 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83292.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=44028 bytes_read=230288 bytes_retransmit=9 bytes_invalid=0 send_seq=2948 receive_seq=2948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.31 cputime=2137.062 memavail=3582188 print_time=1408.213 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83293.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=44078 bytes_read=230490 bytes_retransmit=9 bytes_invalid=0 send_seq=2951 receive_seq=2951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.29 cputime=2137.092 memavail=3582192 print_time=1409.214 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83294.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=44122 bytes_read=230666 bytes_retransmit=9 bytes_invalid=0 send_seq=2954 receive_seq=2954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.29 cputime=2137.125 memavail=3582072 print_time=1410.216 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83295.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=44160 bytes_read=230827 bytes_retransmit=9 bytes_invalid=0 send_seq=2957 receive_seq=2957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999065  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.29 cputime=2137.155 memavail=3582116 print_time=1411.217 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83296.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=44204 bytes_read=231018 bytes_retransmit=9 bytes_invalid=0 send_seq=2960 receive_seq=2960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999062  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.29 cputime=2137.185 memavail=3582008 print_time=1412.218 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 83297.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=44254 bytes_read=231194 bytes_retransmit=9 bytes_invalid=0 send_seq=2963 receive_seq=2963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.29 cputime=2137.214 memavail=3582040 print_time=1413.220 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83298.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44298 bytes_read=231370 bytes_retransmit=9 bytes_invalid=0 send_seq=2966 receive_seq=2966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999064  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.27 cputime=2137.243 memavail=3582188 print_time=1414.220 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83299.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44400 bytes_read=231561 bytes_retransmit=9 bytes_invalid=0 send_seq=2970 receive_seq=2969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999060  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.27 cputime=2137.273 memavail=3582068 print_time=1415.223 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83300.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44435 bytes_read=231742 bytes_retransmit=9 bytes_invalid=0 send_seq=2973 receive_seq=2973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.27 cputime=2137.302 memavail=3582100 print_time=1416.224 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83301.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44479 bytes_read=231903 bytes_retransmit=9 bytes_invalid=0 send_seq=2976 receive_seq=2976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.27 cputime=2137.330 memavail=3582020 print_time=1417.225 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83302.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44523 bytes_read=232094 bytes_retransmit=9 bytes_invalid=0 send_seq=2979 receive_seq=2979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999053  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.27 cputime=2137.359 memavail=3582196 print_time=1418.226 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83303.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44567 bytes_read=232280 bytes_retransmit=9 bytes_invalid=0 send_seq=2982 receive_seq=2981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=19 freq=179999050  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.24 cputime=2137.387 memavail=3581992 print_time=1419.227 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83304.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44605 bytes_read=232461 bytes_retransmit=9 bytes_invalid=0 send_seq=2985 receive_seq=2985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999053  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.24 cputime=2137.416 memavail=3581992 print_time=1420.228 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83305.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44655 bytes_read=232632 bytes_retransmit=9 bytes_invalid=0 send_seq=2988 receive_seq=2987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999051  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.24 cputime=2137.446 memavail=3582040 print_time=1421.231 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83306.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44699 bytes_read=232813 bytes_retransmit=9 bytes_invalid=0 send_seq=2991 receive_seq=2991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.24 cputime=2137.477 memavail=3581988 print_time=1422.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83307.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44743 bytes_read=232989 bytes_retransmit=9 bytes_invalid=0 send_seq=2994 receive_seq=2994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.24 cputime=2137.505 memavail=3582028 print_time=1423.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83308.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44787 bytes_read=233180 bytes_retransmit=9 bytes_invalid=0 send_seq=2997 receive_seq=2997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999073  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.22 cputime=2137.535 memavail=3582044 print_time=1424.234 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83309.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44831 bytes_read=233356 bytes_retransmit=9 bytes_invalid=0 send_seq=3000 receive_seq=3000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999075  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.22 cputime=2137.564 memavail=3581956 print_time=1425.235 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83310.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44875 bytes_read=233532 bytes_retransmit=9 bytes_invalid=0 send_seq=3003 receive_seq=3003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999071  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.22 cputime=2137.593 memavail=3581868 print_time=1426.237 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83311.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44919 bytes_read=233708 bytes_retransmit=9 bytes_invalid=0 send_seq=3006 receive_seq=3006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.22 cputime=2137.622 memavail=3581860 print_time=1427.238 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83312.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=44963 bytes_read=233884 bytes_retransmit=9 bytes_invalid=0 send_seq=3009 receive_seq=3009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999063  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.22 cputime=2137.650 memavail=3581736 print_time=1428.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83313.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45007 bytes_read=234075 bytes_retransmit=9 bytes_invalid=0 send_seq=3012 receive_seq=3012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999060  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.29 cputime=2137.679 memavail=3581800 print_time=1429.241 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83314.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45051 bytes_read=234251 bytes_retransmit=9 bytes_invalid=0 send_seq=3015 receive_seq=3015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.29 cputime=2137.709 memavail=3581716 print_time=1430.243 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83315.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45114 bytes_read=234417 bytes_retransmit=9 bytes_invalid=0 send_seq=3018 receive_seq=3017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.29 cputime=2137.737 memavail=3581860 print_time=1431.244 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83316.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45134 bytes_read=234582 bytes_retransmit=9 bytes_invalid=0 send_seq=3020 receive_seq=3020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999052  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.29 cputime=2137.766 memavail=3581800 print_time=1432.247 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83317.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45203 bytes_read=234757 bytes_retransmit=9 bytes_invalid=0 send_seq=3024 receive_seq=3023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.29 cputime=2137.795 memavail=3581756 print_time=1433.247 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83318.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=45223 bytes_read=234954 bytes_retransmit=9 bytes_invalid=0 send_seq=3026 receive_seq=3025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.26 cputime=2137.823 memavail=3581752 print_time=1434.249 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83319.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=45267 bytes_read=235135 bytes_retransmit=9 bytes_invalid=0 send_seq=3029 receive_seq=3029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999043  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.26 cputime=2137.852 memavail=3581760 print_time=1435.249 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83320.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=45311 bytes_read=235311 bytes_retransmit=9 bytes_invalid=0 send_seq=3032 receive_seq=3032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999042  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.26 cputime=2137.881 memavail=3581828 print_time=1436.250 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83321.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=45355 bytes_read=235487 bytes_retransmit=9 bytes_invalid=0 send_seq=3035 receive_seq=3035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999043  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.26 cputime=2137.910 memavail=3581372 print_time=1437.251 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83322.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=45399 bytes_read=235663 bytes_retransmit=9 bytes_invalid=0 send_seq=3038 receive_seq=3038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999044  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.26 cputime=2137.940 memavail=3581416 print_time=1438.252 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83323.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45443 bytes_read=235849 bytes_retransmit=9 bytes_invalid=0 send_seq=3041 receive_seq=3040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=19 freq=179999042  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.24 cputime=2137.970 memavail=3581512 print_time=1439.254 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83324.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45487 bytes_read=236030 bytes_retransmit=9 bytes_invalid=0 send_seq=3044 receive_seq=3044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999040  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.24 cputime=2138.001 memavail=3581356 print_time=1440.255 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83325.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45555 bytes_read=236211 bytes_retransmit=9 bytes_invalid=0 send_seq=3048 receive_seq=3048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999039  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.24 cputime=2138.030 memavail=3581320 print_time=1441.257 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83326.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45599 bytes_read=236387 bytes_retransmit=9 bytes_invalid=0 send_seq=3051 receive_seq=3051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999039  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.24 cputime=2138.060 memavail=3581336 print_time=1442.258 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83327.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45643 bytes_read=236563 bytes_retransmit=9 bytes_invalid=0 send_seq=3054 receive_seq=3054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999049  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.24 cputime=2138.090 memavail=3581364 print_time=1443.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83328.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45687 bytes_read=236754 bytes_retransmit=9 bytes_invalid=0 send_seq=3057 receive_seq=3057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.22 cputime=2138.119 memavail=3581200 print_time=1444.261 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83329.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45731 bytes_read=236930 bytes_retransmit=9 bytes_invalid=0 send_seq=3060 receive_seq=3060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.22 cputime=2138.148 memavail=3581312 print_time=1445.261 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83330.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45775 bytes_read=237106 bytes_retransmit=9 bytes_invalid=0 send_seq=3063 receive_seq=3063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999044  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.22 cputime=2138.178 memavail=3581104 print_time=1446.263 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 83331.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45819 bytes_read=237282 bytes_retransmit=9 bytes_invalid=0 send_seq=3066 receive_seq=3066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.22 cputime=2138.208 memavail=3581216 print_time=1447.264 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83332.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=45877 bytes_read=237463 bytes_retransmit=9 bytes_invalid=0 send_seq=3070 receive_seq=3070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.22 cputime=2138.238 memavail=3581076 print_time=1448.265 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83333.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=45975 bytes_read=237659 bytes_retransmit=9 bytes_invalid=0 send_seq=3074 receive_seq=3074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.36 cputime=2138.269 memavail=3581312 print_time=1449.265 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83334.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=46019 bytes_read=237835 bytes_retransmit=9 bytes_invalid=0 send_seq=3077 receive_seq=3077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999040  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.36 cputime=2138.299 memavail=3581232 print_time=1450.267 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83335.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=46063 bytes_read=238026 bytes_retransmit=9 bytes_invalid=0 send_seq=3080 receive_seq=3080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999040  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.36 cputime=2138.331 memavail=3581192 print_time=1451.269 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83336.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=46107 bytes_read=238187 bytes_retransmit=9 bytes_invalid=0 send_seq=3083 receive_seq=3083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999039  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.36 cputime=2138.361 memavail=3581064 print_time=1452.270 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83337.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=46151 bytes_read=238363 bytes_retransmit=9 bytes_invalid=0 send_seq=3086 receive_seq=3086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999038  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.36 cputime=2138.392 memavail=3581132 print_time=1453.272 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83338.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46195 bytes_read=238569 bytes_retransmit=9 bytes_invalid=0 send_seq=3089 receive_seq=3089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999037  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.34 cputime=2138.423 memavail=3581204 print_time=1454.273 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83339.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46239 bytes_read=238723 bytes_retransmit=9 bytes_invalid=0 send_seq=3092 receive_seq=3092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999037  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.34 cputime=2138.454 memavail=3581176 print_time=1455.274 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83340.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46283 bytes_read=238889 bytes_retransmit=9 bytes_invalid=0 send_seq=3095 receive_seq=3095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999035  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.34 cputime=2138.485 memavail=3581228 print_time=1456.275 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83341.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46322 bytes_read=239075 bytes_retransmit=9 bytes_invalid=0 send_seq=3097 receive_seq=3097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999034  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.34 cputime=2138.515 memavail=3581356 print_time=1457.276 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83342.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46366 bytes_read=239236 bytes_retransmit=9 bytes_invalid=0 send_seq=3100 receive_seq=3100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999033  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.34 cputime=2138.546 memavail=3581364 print_time=1458.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 83343.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46405 bytes_read=239422 bytes_retransmit=9 bytes_invalid=0 send_seq=3102 receive_seq=3102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999032  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.31 cputime=2138.576 memavail=3581280 print_time=1459.281 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83344.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46463 bytes_read=239618 bytes_retransmit=9 bytes_invalid=0 send_seq=3106 receive_seq=3106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=179999029  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.31 cputime=2138.607 memavail=3581288 print_time=1460.281 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83345.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46541 bytes_read=239784 bytes_retransmit=9 bytes_invalid=0 send_seq=3110 receive_seq=3110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999029  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.31 cputime=2138.637 memavail=3581288 print_time=1461.281 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83346.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46585 bytes_read=239960 bytes_retransmit=9 bytes_invalid=0 send_seq=3113 receive_seq=3113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999032  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.31 cputime=2138.667 memavail=3581196 print_time=1462.283 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83347.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46624 bytes_read=240146 bytes_retransmit=9 bytes_invalid=0 send_seq=3115 receive_seq=3115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.31 cputime=2138.698 memavail=3581132 print_time=1463.285 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83348.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=46668 bytes_read=240322 bytes_retransmit=9 bytes_invalid=0 send_seq=3118 receive_seq=3118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.28 cputime=2138.726 memavail=3581132 print_time=1464.285 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83349.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=46712 bytes_read=240498 bytes_retransmit=9 bytes_invalid=0 send_seq=3121 receive_seq=3121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.28 cputime=2138.755 memavail=3581148 print_time=1465.287 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83350.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=46756 bytes_read=240689 bytes_retransmit=9 bytes_invalid=0 send_seq=3124 receive_seq=3124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.28 cputime=2138.785 memavail=3581148 print_time=1466.289 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83351.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=46800 bytes_read=240850 bytes_retransmit=9 bytes_invalid=0 send_seq=3127 receive_seq=3127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.28 cputime=2138.810 memavail=3580912 print_time=1467.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83352.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=46844 bytes_read=241041 bytes_retransmit=9 bytes_invalid=0 send_seq=3130 receive_seq=3130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.28 cputime=2138.838 memavail=3580916 print_time=1468.292 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83353.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46888 bytes_read=241232 bytes_retransmit=9 bytes_invalid=0 send_seq=3133 receive_seq=3133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999039  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.26 cputime=2138.868 memavail=3580924 print_time=1469.292 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83354.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46932 bytes_read=241393 bytes_retransmit=9 bytes_invalid=0 send_seq=3136 receive_seq=3136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999039  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.26 cputime=2138.897 memavail=3580936 print_time=1470.294 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83355.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=46971 bytes_read=241579 bytes_retransmit=9 bytes_invalid=0 send_seq=3138 receive_seq=3138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999039  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.26 cputime=2138.926 memavail=3580944 print_time=1471.295 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83356.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=47029 bytes_read=241760 bytes_retransmit=9 bytes_invalid=0 send_seq=3142 receive_seq=3142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=179999040  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.26 cputime=2138.956 memavail=3580948 print_time=1472.296 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83357.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=47107 bytes_read=241926 bytes_retransmit=9 bytes_invalid=0 send_seq=3146 receive_seq=3146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999040  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.26 cputime=2138.985 memavail=3580968 print_time=1473.298 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83358.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=47151 bytes_read=242132 bytes_retransmit=9 bytes_invalid=0 send_seq=3149 receive_seq=3149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999039  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.24 cputime=2139.016 memavail=3580972 print_time=1474.299 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83359.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=47195 bytes_read=242308 bytes_retransmit=9 bytes_invalid=0 send_seq=3152 receive_seq=3152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999038  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.24 cputime=2139.047 memavail=3580980 print_time=1475.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83360.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=47239 bytes_read=242469 bytes_retransmit=9 bytes_invalid=0 send_seq=3155 receive_seq=3155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999038  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.24 cputime=2139.077 memavail=3580988 print_time=1476.306 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83361.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=47283 bytes_read=242660 bytes_retransmit=9 bytes_invalid=0 send_seq=3158 receive_seq=3158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999040  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.24 cputime=2139.107 memavail=3580616 print_time=1477.308 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83362.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=47327 bytes_read=242836 bytes_retransmit=9 bytes_invalid=0 send_seq=3161 receive_seq=3161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999042  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.24 cputime=2139.137 memavail=3580660 print_time=1478.310 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 83363.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47371 bytes_read=243004 bytes_retransmit=9 bytes_invalid=0 send_seq=3164 receive_seq=3164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.30 cputime=2139.164 memavail=3580808 print_time=1479.312 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83364.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47415 bytes_read=243187 bytes_retransmit=9 bytes_invalid=0 send_seq=3167 receive_seq=3167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999040  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.30 cputime=2139.194 memavail=3580808 print_time=1480.316 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83365.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47459 bytes_read=243363 bytes_retransmit=9 bytes_invalid=0 send_seq=3170 receive_seq=3170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999042  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.30 cputime=2139.223 memavail=3580996 print_time=1481.314 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83366.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47503 bytes_read=243524 bytes_retransmit=9 bytes_invalid=0 send_seq=3173 receive_seq=3173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.30 cputime=2139.252 memavail=3581032 print_time=1482.315 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83367.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47547 bytes_read=243715 bytes_retransmit=9 bytes_invalid=0 send_seq=3176 receive_seq=3176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999042  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.30 cputime=2139.282 memavail=3580948 print_time=1483.316 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83368.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47591 bytes_read=243906 bytes_retransmit=9 bytes_invalid=0 send_seq=3179 receive_seq=3179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999042  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.28 cputime=2139.310 memavail=3581108 print_time=1484.318 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83369.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47635 bytes_read=244067 bytes_retransmit=9 bytes_invalid=0 send_seq=3182 receive_seq=3182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999042  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.28 cputime=2139.339 memavail=3581152 print_time=1485.320 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83370.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47679 bytes_read=244258 bytes_retransmit=9 bytes_invalid=0 send_seq=3185 receive_seq=3185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.28 cputime=2139.369 memavail=3581200 print_time=1486.322 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83371.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47723 bytes_read=244434 bytes_retransmit=9 bytes_invalid=0 send_seq=3188 receive_seq=3188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.28 cputime=2139.398 memavail=3581220 print_time=1487.323 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83372.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=47767 bytes_read=244595 bytes_retransmit=9 bytes_invalid=0 send_seq=3191 receive_seq=3191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.28 cputime=2139.425 memavail=3581212 print_time=1488.325 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83373.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=47811 bytes_read=244801 bytes_retransmit=9 bytes_invalid=0 send_seq=3194 receive_seq=3194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999041  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.25 cputime=2139.455 memavail=3581248 print_time=1489.327 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83374.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=47855 bytes_read=244977 bytes_retransmit=9 bytes_invalid=0 send_seq=3197 receive_seq=3197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999052  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.25 cputime=2139.484 memavail=3581172 print_time=1490.329 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 83375.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=47899 bytes_read=245153 bytes_retransmit=9 bytes_invalid=0 send_seq=3200 receive_seq=3200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999052  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.25 cputime=2139.514 memavail=3581088 print_time=1491.331 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83376.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=47949 bytes_read=245345 bytes_retransmit=9 bytes_invalid=0 send_seq=3204 receive_seq=3204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.25 cputime=2139.543 memavail=3581132 print_time=1492.332 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83377.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=47993 bytes_read=245521 bytes_retransmit=9 bytes_invalid=0 send_seq=3207 receive_seq=3207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.25 cputime=2139.572 memavail=3581132 print_time=1493.334 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83378.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=48045 bytes_read=245717 bytes_retransmit=9 bytes_invalid=0 send_seq=3211 receive_seq=3211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999051  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.23 cputime=2139.603 memavail=3581136 print_time=1494.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83379.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=48135 bytes_read=245898 bytes_retransmit=9 bytes_invalid=0 send_seq=3215 receive_seq=3215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.23 cputime=2139.634 memavail=3581144 print_time=1495.338 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83380.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=48179 bytes_read=246074 bytes_retransmit=9 bytes_invalid=0 send_seq=3218 receive_seq=3218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.23 cputime=2139.664 memavail=3581028 print_time=1496.339 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83381.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=48223 bytes_read=246250 bytes_retransmit=9 bytes_invalid=0 send_seq=3221 receive_seq=3221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.23 cputime=2139.693 memavail=3580276 print_time=1497.339 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83382.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=48267 bytes_read=246426 bytes_retransmit=9 bytes_invalid=0 send_seq=3224 receive_seq=3224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.23 cputime=2139.722 memavail=3580228 print_time=1498.340 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83383.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=48311 bytes_read=246617 bytes_retransmit=9 bytes_invalid=0 send_seq=3227 receive_seq=3227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.21 cputime=2139.753 memavail=3580116 print_time=1499.342 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83384.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=48418 bytes_read=246803 bytes_retransmit=9 bytes_invalid=0 send_seq=3232 receive_seq=3232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.21 cputime=2139.784 memavail=3580320 print_time=1500.343 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83385.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=48502 bytes_read=246984 bytes_retransmit=9 bytes_invalid=0 send_seq=3236 receive_seq=3236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.21 cputime=2139.813 memavail=3580236 print_time=1501.344 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83386.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=48609 bytes_read=247170 bytes_retransmit=9 bytes_invalid=0 send_seq=3241 receive_seq=3241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.21 cputime=2139.846 memavail=3580240 print_time=1502.349 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83387.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=48756 bytes_read=247350 bytes_retransmit=9 bytes_invalid=0 send_seq=3247 receive_seq=3247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.21 cputime=2139.878 memavail=3580248 print_time=1503.349 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83388.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=48840 bytes_read=247541 bytes_retransmit=9 bytes_invalid=0 send_seq=3251 receive_seq=3251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.20 cputime=2139.908 memavail=3580088 print_time=1504.350 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83389.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=49070 bytes_read=247737 bytes_retransmit=9 bytes_invalid=0 send_seq=3258 receive_seq=3258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.20 cputime=2139.941 memavail=3580208 print_time=1505.352 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83390.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=49151 bytes_read=247918 bytes_retransmit=9 bytes_invalid=0 send_seq=3262 receive_seq=3262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.20 cputime=2139.970 memavail=3579988 print_time=1506.352 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83391.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=49258 bytes_read=248104 bytes_retransmit=9 bytes_invalid=0 send_seq=3267 receive_seq=3267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.20 cputime=2140.001 memavail=3579092 print_time=1507.354 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83392.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=49342 bytes_read=248285 bytes_retransmit=9 bytes_invalid=0 send_seq=3271 receive_seq=3271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.20 cputime=2140.030 memavail=3579000 print_time=1508.355 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83393.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=49435 bytes_read=248481 bytes_retransmit=9 bytes_invalid=0 send_seq=3275 receive_seq=3275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.26 cputime=2140.061 memavail=3579004 print_time=1509.358 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83394.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=49479 bytes_read=248657 bytes_retransmit=9 bytes_invalid=0 send_seq=3278 receive_seq=3278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.26 cputime=2140.091 memavail=3578952 print_time=1510.360 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83395.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=49537 bytes_read=248838 bytes_retransmit=9 bytes_invalid=0 send_seq=3282 receive_seq=3282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.26 cputime=2140.121 memavail=3578800 print_time=1511.360 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83396.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=49678 bytes_read=249029 bytes_retransmit=9 bytes_invalid=0 send_seq=3288 receive_seq=3288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.26 cputime=2140.152 memavail=3578948 print_time=1512.362 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83397.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=49831 bytes_read=249220 bytes_retransmit=9 bytes_invalid=0 send_seq=3294 receive_seq=3294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.26 cputime=2140.186 memavail=3578944 print_time=1513.366 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83398.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=49964 bytes_read=249421 bytes_retransmit=9 bytes_invalid=0 send_seq=3299 receive_seq=3299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.24 cputime=2140.217 memavail=3578924 print_time=1514.367 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 83399.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=50008 bytes_read=249597 bytes_retransmit=9 bytes_invalid=0 send_seq=3302 receive_seq=3302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.24 cputime=2140.246 memavail=3578772 print_time=1515.368 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83400.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=50052 bytes_read=249788 bytes_retransmit=9 bytes_invalid=0 send_seq=3305 receive_seq=3305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.24 cputime=2140.276 memavail=3578860 print_time=1516.368 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83401.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=50145 bytes_read=249954 bytes_retransmit=9 bytes_invalid=0 send_seq=3309 receive_seq=3309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.24 cputime=2140.306 memavail=3578840 print_time=1517.371 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83402.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=50252 bytes_read=250140 bytes_retransmit=9 bytes_invalid=0 send_seq=3314 receive_seq=3314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.24 cputime=2140.339 memavail=3578916 print_time=1518.373 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83403.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=50336 bytes_read=250351 bytes_retransmit=9 bytes_invalid=0 send_seq=3318 receive_seq=3318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.22 cputime=2140.369 memavail=3578784 print_time=1519.374 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83404.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=50501 bytes_read=250527 bytes_retransmit=9 bytes_invalid=0 send_seq=3324 receive_seq=3324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=179999043  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.22 cputime=2140.402 memavail=3578900 print_time=1520.375 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83405.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=50585 bytes_read=250703 bytes_retransmit=9 bytes_invalid=0 send_seq=3327 receive_seq=3327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.22 cputime=2140.432 memavail=3579212 print_time=1521.376 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83406.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=50629 bytes_read=250894 bytes_retransmit=9 bytes_invalid=0 send_seq=3330 receive_seq=3330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.22 cputime=2140.462 memavail=3579084 print_time=1522.377 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83407.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=50673 bytes_read=251055 bytes_retransmit=9 bytes_invalid=0 send_seq=3333 receive_seq=3333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.22 cputime=2140.491 memavail=3578880 print_time=1523.380 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83408.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=50717 bytes_read=251246 bytes_retransmit=9 bytes_invalid=0 send_seq=3336 receive_seq=3336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.20 cputime=2140.521 memavail=3578844 print_time=1524.380 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83409.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=50761 bytes_read=251437 bytes_retransmit=9 bytes_invalid=0 send_seq=3339 receive_seq=3339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.20 cputime=2140.552 memavail=3578888 print_time=1525.382 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83410.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=50805 bytes_read=251596 bytes_retransmit=9 bytes_invalid=0 send_seq=3342 receive_seq=3342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999048  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.20 cputime=2140.582 memavail=3579120 print_time=1526.385 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83411.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=50849 bytes_read=251761 bytes_retransmit=9 bytes_invalid=0 send_seq=3345 receive_seq=3345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.20 cputime=2140.611 memavail=3579060 print_time=1527.386 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83412.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=50893 bytes_read=251948 bytes_retransmit=9 bytes_invalid=0 send_seq=3348 receive_seq=3348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.20 cputime=2140.641 memavail=3579156 print_time=1528.386 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83413.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=50937 bytes_read=252124 bytes_retransmit=9 bytes_invalid=0 send_seq=3351 receive_seq=3351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.19 cputime=2140.670 memavail=3579024 print_time=1529.390 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83414.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=50981 bytes_read=252315 bytes_retransmit=9 bytes_invalid=0 send_seq=3354 receive_seq=3354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.19 cputime=2140.701 memavail=3579108 print_time=1530.390 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83415.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=51025 bytes_read=252491 bytes_retransmit=9 bytes_invalid=0 send_seq=3357 receive_seq=3357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999047  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.19 cputime=2140.731 memavail=3579192 print_time=1531.392 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 83416.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=51069 bytes_read=252652 bytes_retransmit=9 bytes_invalid=0 send_seq=3360 receive_seq=3360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.19 cputime=2140.762 memavail=3579400 print_time=1532.394 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83417.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=51113 bytes_read=252843 bytes_retransmit=9 bytes_invalid=0 send_seq=3363 receive_seq=3363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999046  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.19 cputime=2140.791 memavail=3579368 print_time=1533.394 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83418.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51157 bytes_read=253034 bytes_retransmit=9 bytes_invalid=0 send_seq=3366 receive_seq=3366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.17 cputime=2140.820 memavail=3579452 print_time=1534.396 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83419.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51201 bytes_read=253195 bytes_retransmit=9 bytes_invalid=0 send_seq=3369 receive_seq=3369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.17 cputime=2140.849 memavail=3579792 print_time=1535.397 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83420.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51245 bytes_read=253386 bytes_retransmit=9 bytes_invalid=0 send_seq=3372 receive_seq=3372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999045  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.17 cputime=2140.879 memavail=3579724 print_time=1536.398 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83421.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51289 bytes_read=253562 bytes_retransmit=9 bytes_invalid=0 send_seq=3375 receive_seq=3375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.17 cputime=2140.907 memavail=3579852 print_time=1537.400 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83422.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51333 bytes_read=253723 bytes_retransmit=9 bytes_invalid=0 send_seq=3378 receive_seq=3378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999049  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.17 cputime=2140.935 memavail=3579800 print_time=1538.403 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83423.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51385 bytes_read=253934 bytes_retransmit=9 bytes_invalid=0 send_seq=3382 receive_seq=3382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=179999060  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.24 cputime=2140.966 memavail=3579856 print_time=1539.404 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83424.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51470 bytes_read=254115 bytes_retransmit=9 bytes_invalid=0 send_seq=3386 receive_seq=3386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.24 cputime=2140.996 memavail=3579888 print_time=1540.406 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83425.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51514 bytes_read=254276 bytes_retransmit=9 bytes_invalid=0 send_seq=3389 receive_seq=3389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.24 cputime=2141.025 memavail=3579952 print_time=1541.407 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83426.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51558 bytes_read=254467 bytes_retransmit=9 bytes_invalid=0 send_seq=3392 receive_seq=3392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.24 cputime=2141.055 memavail=3580044 print_time=1542.408 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83427.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=51602 bytes_read=254643 bytes_retransmit=9 bytes_invalid=0 send_seq=3395 receive_seq=3395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.24 cputime=2141.085 memavail=3580248 print_time=1543.409 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83428.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=51646 bytes_read=254819 bytes_retransmit=9 bytes_invalid=0 send_seq=3398 receive_seq=3398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.22 cputime=2141.115 memavail=3580436 print_time=1544.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 83429.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=51690 bytes_read=255010 bytes_retransmit=9 bytes_invalid=0 send_seq=3401 receive_seq=3401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.22 cputime=2141.145 memavail=3580308 print_time=1545.413 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83430.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=51734 bytes_read=255186 bytes_retransmit=9 bytes_invalid=0 send_seq=3404 receive_seq=3404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.22 cputime=2141.174 memavail=3580624 print_time=1546.415 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83431.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=51778 bytes_read=255347 bytes_retransmit=9 bytes_invalid=0 send_seq=3407 receive_seq=3407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.22 cputime=2141.202 memavail=3581092 print_time=1547.416 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83432.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=51822 bytes_read=255538 bytes_retransmit=9 bytes_invalid=0 send_seq=3410 receive_seq=3410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.22 cputime=2141.232 memavail=3581052 print_time=1548.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83433.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=51866 bytes_read=255729 bytes_retransmit=9 bytes_invalid=0 send_seq=3413 receive_seq=3413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=75.0 pwm=0.000 sysload=0.20 cputime=2141.262 memavail=3581116 print_time=1549.419 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83434.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=52054 bytes_read=255902 bytes_retransmit=9 bytes_invalid=0 send_seq=3420 receive_seq=3419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=1 freq=179999056  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.20 cputime=2141.294 memavail=3581120 print_time=1550.421 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83435.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=52145 bytes_read=256101 bytes_retransmit=9 bytes_invalid=0 send_seq=3424 receive_seq=3424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.20 cputime=2141.323 memavail=3581156 print_time=1551.422 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83436.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=52238 bytes_read=256281 bytes_retransmit=9 bytes_invalid=0 send_seq=3428 receive_seq=3428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.20 cputime=2141.354 memavail=3581076 print_time=1552.425 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83437.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=52296 bytes_read=256447 bytes_retransmit=9 bytes_invalid=0 send_seq=3432 receive_seq=3432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.20 cputime=2141.383 memavail=3581152 print_time=1553.425 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83438.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=52421 bytes_read=256663 bytes_retransmit=9 bytes_invalid=0 send_seq=3437 receive_seq=3437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.18 cputime=2141.415 memavail=3581320 print_time=1554.427 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83439.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=52538 bytes_read=256849 bytes_retransmit=9 bytes_invalid=0 send_seq=3442 receive_seq=3442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.18 cputime=2141.446 memavail=3581344 print_time=1555.430 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83440.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=52590 bytes_read=257030 bytes_retransmit=9 bytes_invalid=0 send_seq=3446 receive_seq=3446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.18 cputime=2141.477 memavail=3581264 print_time=1556.430 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83441.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=52729 bytes_read=257216 bytes_retransmit=9 bytes_invalid=0 send_seq=3451 receive_seq=3451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999075  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.18 cputime=2141.506 memavail=3581712 print_time=1557.433 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83442.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=52773 bytes_read=257392 bytes_retransmit=9 bytes_invalid=0 send_seq=3454 receive_seq=3454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.18 cputime=2141.535 memavail=3581776 print_time=1558.434 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83443.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=52833 bytes_read=257588 bytes_retransmit=9 bytes_invalid=0 send_seq=3458 receive_seq=3458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.17 cputime=2141.564 memavail=3581836 print_time=1559.435 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83444.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=52877 bytes_read=257764 bytes_retransmit=9 bytes_invalid=0 send_seq=3461 receive_seq=3461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999083  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.17 cputime=2141.594 memavail=3581844 print_time=1560.437 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83445.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=52921 bytes_read=257940 bytes_retransmit=9 bytes_invalid=0 send_seq=3464 receive_seq=3464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999081  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.17 cputime=2141.623 memavail=3581844 print_time=1561.439 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83446.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=52965 bytes_read=258116 bytes_retransmit=9 bytes_invalid=0 send_seq=3467 receive_seq=3467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999080  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.17 cputime=2141.652 memavail=3581852 print_time=1562.440 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83447.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=53025 bytes_read=258297 bytes_retransmit=9 bytes_invalid=0 send_seq=3471 receive_seq=3471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.17 cputime=2141.681 memavail=3581860 print_time=1563.441 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83448.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=53069 bytes_read=258488 bytes_retransmit=9 bytes_invalid=0 send_seq=3474 receive_seq=3474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999076  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.16 cputime=2141.710 memavail=3581872 print_time=1564.443 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83449.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=53113 bytes_read=258664 bytes_retransmit=9 bytes_invalid=0 send_seq=3477 receive_seq=3477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999074  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.16 cputime=2141.739 memavail=3581856 print_time=1565.444 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83450.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=53157 bytes_read=258840 bytes_retransmit=9 bytes_invalid=0 send_seq=3480 receive_seq=3480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999079  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.16 cputime=2141.770 memavail=3581848 print_time=1566.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 83451.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=53212 bytes_read=259016 bytes_retransmit=9 bytes_invalid=0 send_seq=3483 receive_seq=3483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.16 cputime=2141.799 memavail=3581564 print_time=1567.448 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83452.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=53256 bytes_read=259192 bytes_retransmit=9 bytes_invalid=0 send_seq=3486 receive_seq=3486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999074  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.16 cputime=2141.828 memavail=3581488 print_time=1568.450 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83453.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=53300 bytes_read=259383 bytes_retransmit=9 bytes_invalid=0 send_seq=3489 receive_seq=3489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.14 cputime=2141.858 memavail=3581452 print_time=1569.452 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83454.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=53383 bytes_read=259559 bytes_retransmit=9 bytes_invalid=0 send_seq=3492 receive_seq=3492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.14 cputime=2141.888 memavail=3581540 print_time=1570.453 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83455.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=53443 bytes_read=259740 bytes_retransmit=9 bytes_invalid=0 send_seq=3496 receive_seq=3496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.14 cputime=2141.917 memavail=3581596 print_time=1571.455 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83456.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=53487 bytes_read=259916 bytes_retransmit=9 bytes_invalid=0 send_seq=3499 receive_seq=3499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=75.7 pwm=0.700 sysload=0.14 cputime=2141.947 memavail=3581432 print_time=1572.456 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83457.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=53531 bytes_read=260092 bytes_retransmit=9 bytes_invalid=0 send_seq=3502 receive_seq=3502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=80 temp=75.8 pwm=0.700 sysload=0.14 cputime=2141.975 memavail=3581676 print_time=1573.458 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83458.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=53575 bytes_read=260278 bytes_retransmit=9 bytes_invalid=0 send_seq=3505 receive_seq=3505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=80 temp=75.8 pwm=0.700 sysload=0.13 cputime=2142.005 memavail=3581656 print_time=1574.458 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83459.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=53635 bytes_read=260448 bytes_retransmit=9 bytes_invalid=0 send_seq=3509 receive_seq=3509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=80 temp=75.9 pwm=0.700 sysload=0.13 cputime=2142.035 memavail=3581536 print_time=1575.460 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83460.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=53679 bytes_read=260624 bytes_retransmit=9 bytes_invalid=0 send_seq=3512 receive_seq=3512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999063  heater_bed: target=80 temp=76.0 pwm=0.700 sysload=0.13 cputime=2142.064 memavail=3581332 print_time=1576.462 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83461.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=53723 bytes_read=260800 bytes_retransmit=9 bytes_invalid=0 send_seq=3515 receive_seq=3515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=80 temp=76.1 pwm=0.700 sysload=0.13 cputime=2142.094 memavail=3581016 print_time=1577.462 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 83462.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=53767 bytes_read=260976 bytes_retransmit=9 bytes_invalid=0 send_seq=3518 receive_seq=3518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=76.1 pwm=0.700 sysload=0.13 cputime=2142.123 memavail=3580844 print_time=1578.463 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83463.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=53811 bytes_read=261167 bytes_retransmit=9 bytes_invalid=0 send_seq=3521 receive_seq=3521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=80 temp=76.2 pwm=0.700 sysload=0.20 cputime=2142.152 memavail=3580996 print_time=1579.465 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83464.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=53885 bytes_read=261353 bytes_retransmit=9 bytes_invalid=0 send_seq=3526 receive_seq=3526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=76.3 pwm=0.700 sysload=0.20 cputime=2142.183 memavail=3580828 print_time=1580.466 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83465.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=53969 bytes_read=261534 bytes_retransmit=9 bytes_invalid=0 send_seq=3530 receive_seq=3530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=76.4 pwm=0.700 sysload=0.20 cputime=2142.213 memavail=3580860 print_time=1581.468 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83466.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=54013 bytes_read=261710 bytes_retransmit=9 bytes_invalid=0 send_seq=3533 receive_seq=3533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=76.5 pwm=0.700 sysload=0.20 cputime=2142.242 memavail=3580712 print_time=1582.468 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83467.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=54065 bytes_read=261891 bytes_retransmit=9 bytes_invalid=0 send_seq=3537 receive_seq=3537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999061  heater_bed: target=80 temp=76.6 pwm=0.700 sysload=0.20 cputime=2142.275 memavail=3580716 print_time=1583.470 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83468.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=54171 bytes_read=262107 bytes_retransmit=9 bytes_invalid=0 send_seq=3542 receive_seq=3542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=80 temp=76.7 pwm=0.700 sysload=0.18 cputime=2142.306 memavail=3580780 print_time=1584.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83469.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=54215 bytes_read=262268 bytes_retransmit=9 bytes_invalid=0 send_seq=3545 receive_seq=3545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.18 cputime=2142.335 memavail=3580664 print_time=1585.473 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83470.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=54259 bytes_read=262444 bytes_retransmit=9 bytes_invalid=0 send_seq=3548 receive_seq=3548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=80 temp=76.9 pwm=0.700 sysload=0.18 cputime=2142.365 memavail=3580632 print_time=1586.475 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83471.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=54303 bytes_read=262635 bytes_retransmit=9 bytes_invalid=0 send_seq=3551 receive_seq=3551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=80 temp=76.9 pwm=0.700 sysload=0.18 cputime=2142.395 memavail=3579640 print_time=1587.475 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83472.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=54358 bytes_read=262796 bytes_retransmit=9 bytes_invalid=0 send_seq=3554 receive_seq=3554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=77.0 pwm=0.700 sysload=0.18 cputime=2142.425 memavail=3579612 print_time=1588.477 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83473.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=54402 bytes_read=262987 bytes_retransmit=9 bytes_invalid=0 send_seq=3557 receive_seq=3557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=77.2 pwm=0.700 sysload=0.17 cputime=2142.456 memavail=3579552 print_time=1589.478 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83474.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=54446 bytes_read=263178 bytes_retransmit=9 bytes_invalid=0 send_seq=3560 receive_seq=3560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=80 temp=77.2 pwm=0.700 sysload=0.17 cputime=2142.488 memavail=3579616 print_time=1590.481 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83475.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=54490 bytes_read=263339 bytes_retransmit=9 bytes_invalid=0 send_seq=3563 receive_seq=3563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999053  heater_bed: target=80 temp=77.3 pwm=0.700 sysload=0.17 cputime=2142.517 memavail=3579532 print_time=1591.482 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83476.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=54550 bytes_read=263520 bytes_retransmit=9 bytes_invalid=0 send_seq=3567 receive_seq=3567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999053  heater_bed: target=80 temp=77.4 pwm=0.700 sysload=0.17 cputime=2142.546 memavail=3579660 print_time=1592.483 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83477.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=54594 bytes_read=263711 bytes_retransmit=9 bytes_invalid=0 send_seq=3570 receive_seq=3570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999052  heater_bed: target=80 temp=77.5 pwm=0.700 sysload=0.17 cputime=2142.575 memavail=3579744 print_time=1593.484 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83478.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=54682 bytes_read=263887 bytes_retransmit=9 bytes_invalid=0 send_seq=3573 receive_seq=3573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=77.6 pwm=0.700 sysload=0.16 cputime=2142.605 memavail=3579832 print_time=1594.486 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83479.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=54726 bytes_read=264063 bytes_retransmit=9 bytes_invalid=0 send_seq=3576 receive_seq=3576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=80 temp=77.7 pwm=0.700 sysload=0.16 cputime=2142.635 memavail=3579728 print_time=1595.487 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83480.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=54786 bytes_read=264259 bytes_retransmit=9 bytes_invalid=0 send_seq=3580 receive_seq=3580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=80 temp=77.8 pwm=0.700 sysload=0.16 cputime=2142.665 memavail=3579924 print_time=1596.488 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83481.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=54830 bytes_read=264420 bytes_retransmit=9 bytes_invalid=0 send_seq=3583 receive_seq=3583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=80 temp=77.9 pwm=0.700 sysload=0.16 cputime=2142.695 memavail=3579304 print_time=1597.490 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83482.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=54874 bytes_read=264603 bytes_retransmit=9 bytes_invalid=0 send_seq=3586 receive_seq=3586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=80 temp=78.0 pwm=0.700 sysload=0.16 cputime=2142.724 memavail=3579492 print_time=1598.492 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83483.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=54991 bytes_read=264796 bytes_retransmit=9 bytes_invalid=0 send_seq=3591 receive_seq=3591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=179999055  heater_bed: target=80 temp=78.1 pwm=0.700 sysload=0.14 cputime=2142.755 memavail=3579676 print_time=1599.493 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83484.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=55087 bytes_read=264962 bytes_retransmit=9 bytes_invalid=0 send_seq=3595 receive_seq=3595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=80 temp=78.1 pwm=0.700 sysload=0.14 cputime=2142.785 memavail=3579492 print_time=1600.494 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83485.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=55147 bytes_read=265158 bytes_retransmit=9 bytes_invalid=0 send_seq=3599 receive_seq=3599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=80 temp=78.3 pwm=0.700 sysload=0.14 cputime=2142.816 memavail=3579532 print_time=1601.496 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83486.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=55191 bytes_read=265334 bytes_retransmit=9 bytes_invalid=0 send_seq=3602 receive_seq=3602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999054  heater_bed: target=80 temp=78.3 pwm=0.700 sysload=0.14 cputime=2142.837 memavail=3579976 print_time=1602.496 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83487.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=55235 bytes_read=265495 bytes_retransmit=9 bytes_invalid=0 send_seq=3605 receive_seq=3605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999053  heater_bed: target=80 temp=78.4 pwm=0.700 sysload=0.14 cputime=2142.867 memavail=3580032 print_time=1603.501 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83488.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=55279 bytes_read=265701 bytes_retransmit=9 bytes_invalid=0 send_seq=3608 receive_seq=3608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999052  heater_bed: target=80 temp=78.5 pwm=0.700 sysload=0.13 cputime=2142.896 memavail=3580064 print_time=1604.501 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83489.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=55353 bytes_read=265887 bytes_retransmit=9 bytes_invalid=0 send_seq=3613 receive_seq=3613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=179999050  heater_bed: target=80 temp=78.6 pwm=0.700 sysload=0.13 cputime=2142.926 memavail=3580008 print_time=1605.504 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83490.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=55431 bytes_read=266053 bytes_retransmit=9 bytes_invalid=0 send_seq=3617 receive_seq=3617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=80 temp=78.7 pwm=0.700 sysload=0.13 cputime=2142.955 memavail=3580312 print_time=1606.506 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83491.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=55475 bytes_read=266244 bytes_retransmit=9 bytes_invalid=0 send_seq=3620 receive_seq=3620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999050  heater_bed: target=80 temp=78.8 pwm=0.700 sysload=0.13 cputime=2142.984 memavail=3579888 print_time=1607.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83492.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=55519 bytes_read=266420 bytes_retransmit=9 bytes_invalid=0 send_seq=3623 receive_seq=3623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999051  heater_bed: target=80 temp=78.9 pwm=0.700 sysload=0.13 cputime=2143.013 memavail=3579768 print_time=1608.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83493.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=55580 bytes_read=266612 bytes_retransmit=9 bytes_invalid=0 send_seq=3627 receive_seq=3627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=79.0 pwm=0.700 sysload=0.12 cputime=2143.042 memavail=3579824 print_time=1609.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83494.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=55624 bytes_read=266803 bytes_retransmit=9 bytes_invalid=0 send_seq=3630 receive_seq=3630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=79.1 pwm=0.700 sysload=0.12 cputime=2143.071 memavail=3579860 print_time=1610.510 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 83495.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=55668 bytes_read=266979 bytes_retransmit=9 bytes_invalid=0 send_seq=3633 receive_seq=3633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=79.2 pwm=0.700 sysload=0.12 cputime=2143.100 memavail=3579736 print_time=1611.511 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83496.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=55712 bytes_read=267140 bytes_retransmit=9 bytes_invalid=0 send_seq=3636 receive_seq=3636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=79.3 pwm=0.700 sysload=0.12 cputime=2143.129 memavail=3579748 print_time=1612.512 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83497.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=55772 bytes_read=267336 bytes_retransmit=9 bytes_invalid=0 send_seq=3640 receive_seq=3640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=79.4 pwm=0.700 sysload=0.12 cputime=2143.160 memavail=3579756 print_time=1613.513 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 83498.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=55816 bytes_read=267527 bytes_retransmit=9 bytes_invalid=0 send_seq=3643 receive_seq=3643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999063  heater_bed: target=80 temp=79.5 pwm=0.700 sysload=0.11 cputime=2143.189 memavail=3579760 print_time=1614.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83499.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=55923 bytes_read=267693 bytes_retransmit=9 bytes_invalid=0 send_seq=3647 receive_seq=3647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=80 temp=79.6 pwm=0.700 sysload=0.11 cputime=2143.219 memavail=3579768 print_time=1615.516 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83500.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=55967 bytes_read=267884 bytes_retransmit=9 bytes_invalid=0 send_seq=3650 receive_seq=3650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=80 temp=79.7 pwm=0.700 sysload=0.11 cputime=2143.248 memavail=3579768 print_time=1616.518 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83501.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=56022 bytes_read=268060 bytes_retransmit=9 bytes_invalid=0 send_seq=3653 receive_seq=3653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=80 temp=79.8 pwm=0.700 sysload=0.11 cputime=2143.277 memavail=3579652 print_time=1617.520 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83502.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=56066 bytes_read=268221 bytes_retransmit=9 bytes_invalid=0 send_seq=3656 receive_seq=3656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=80 temp=79.9 pwm=0.700 sysload=0.11 cputime=2143.307 memavail=3579596 print_time=1618.521 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Autotune: raw=-5.720303/0.700000 Ku=0.311616 Tu=633.000000  Kp=47.677178 Ki=0.150639 Kd=3772.456724
Stats 83503.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=56243 bytes_read=268442 bytes_retransmit=9 bytes_invalid=0 send_seq=3662 receive_seq=3662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.10 cputime=2143.340 memavail=3579600 print_time=1619.522 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83504.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=56287 bytes_read=268618 bytes_retransmit=9 bytes_invalid=0 send_seq=3665 receive_seq=3665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.10 cputime=2143.369 memavail=3579604 print_time=1620.523 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83505.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=56331 bytes_read=268779 bytes_retransmit=9 bytes_invalid=0 send_seq=3668 receive_seq=3668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.10 cputime=2143.397 memavail=3579616 print_time=1621.524 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83506.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=56375 bytes_read=268959 bytes_retransmit=9 bytes_invalid=0 send_seq=3671 receive_seq=3671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.10 cputime=2143.426 memavail=3579676 print_time=1622.524 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83507.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=56419 bytes_read=269128 bytes_retransmit=9 bytes_invalid=0 send_seq=3674 receive_seq=3674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.10 cputime=2143.455 memavail=3579812 print_time=1623.526 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83508.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=56463 bytes_read=269319 bytes_retransmit=9 bytes_invalid=0 send_seq=3677 receive_seq=3677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.09 cputime=2143.484 memavail=3579880 print_time=1624.527 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83509.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=56507 bytes_read=269495 bytes_retransmit=9 bytes_invalid=0 send_seq=3680 receive_seq=3680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.09 cputime=2143.512 memavail=3579792 print_time=1625.528 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83510.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=56551 bytes_read=269671 bytes_retransmit=9 bytes_invalid=0 send_seq=3683 receive_seq=3683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.09 cputime=2143.541 memavail=3579796 print_time=1626.532 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83511.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=56595 bytes_read=269847 bytes_retransmit=9 bytes_invalid=0 send_seq=3686 receive_seq=3686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999053  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.09 cputime=2143.571 memavail=3579868 print_time=1627.532 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83512.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=56688 bytes_read=270028 bytes_retransmit=9 bytes_invalid=0 send_seq=3690 receive_seq=3690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999053  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.09 cputime=2143.601 memavail=3579876 print_time=1628.533 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83513.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=56732 bytes_read=270219 bytes_retransmit=9 bytes_invalid=0 send_seq=3693 receive_seq=3693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2143.629 memavail=3579940 print_time=1629.534 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83514.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=56776 bytes_read=270395 bytes_retransmit=9 bytes_invalid=0 send_seq=3696 receive_seq=3696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2143.659 memavail=3579944 print_time=1630.535 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83515.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=56820 bytes_read=270571 bytes_retransmit=9 bytes_invalid=0 send_seq=3699 receive_seq=3699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2143.689 memavail=3579952 print_time=1631.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83516.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=56864 bytes_read=270747 bytes_retransmit=9 bytes_invalid=0 send_seq=3702 receive_seq=3702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2143.717 memavail=3579840 print_time=1632.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83517.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=56908 bytes_read=270923 bytes_retransmit=9 bytes_invalid=0 send_seq=3705 receive_seq=3705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2143.746 memavail=3579852 print_time=1633.538 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83518.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=56952 bytes_read=271114 bytes_retransmit=9 bytes_invalid=0 send_seq=3708 receive_seq=3708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.08 cputime=2143.775 memavail=3579852 print_time=1634.540 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 83519.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=56996 bytes_read=271290 bytes_retransmit=9 bytes_invalid=0 send_seq=3711 receive_seq=3711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.08 cputime=2143.806 memavail=3579836 print_time=1635.543 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83520.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=57040 bytes_read=271466 bytes_retransmit=9 bytes_invalid=0 send_seq=3714 receive_seq=3714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.08 cputime=2143.836 memavail=3579756 print_time=1636.543 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83521.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=57084 bytes_read=271642 bytes_retransmit=9 bytes_invalid=0 send_seq=3717 receive_seq=3717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.08 cputime=2143.866 memavail=3579720 print_time=1637.545 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83522.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=57123 bytes_read=271813 bytes_retransmit=9 bytes_invalid=0 send_seq=3719 receive_seq=3719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.08 cputime=2143.895 memavail=3579600 print_time=1638.546 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83523.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=57167 bytes_read=272004 bytes_retransmit=9 bytes_invalid=0 send_seq=3722 receive_seq=3722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.07 cputime=2143.926 memavail=3579632 print_time=1639.547 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83524.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=57225 bytes_read=272185 bytes_retransmit=9 bytes_invalid=0 send_seq=3726 receive_seq=3726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.07 cputime=2143.955 memavail=3579692 print_time=1640.547 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83525.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=57309 bytes_read=272366 bytes_retransmit=9 bytes_invalid=0 send_seq=3730 receive_seq=3730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.07 cputime=2143.986 memavail=3579500 print_time=1641.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83526.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=57353 bytes_read=272542 bytes_retransmit=9 bytes_invalid=0 send_seq=3733 receive_seq=3733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.07 cputime=2144.015 memavail=3579516 print_time=1642.551 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83527.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=57397 bytes_read=272718 bytes_retransmit=9 bytes_invalid=0 send_seq=3736 receive_seq=3736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999073  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2144.046 memavail=3579500 print_time=1643.551 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83528.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=57441 bytes_read=272909 bytes_retransmit=9 bytes_invalid=0 send_seq=3739 receive_seq=3739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2144.077 memavail=3579528 print_time=1644.553 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 83529.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=57485 bytes_read=273084 bytes_retransmit=9 bytes_invalid=0 send_seq=3742 receive_seq=3742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2144.108 memavail=3579528 print_time=1645.554 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83530.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=57529 bytes_read=273249 bytes_retransmit=9 bytes_invalid=0 send_seq=3745 receive_seq=3745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2144.137 memavail=3579684 print_time=1646.554 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83531.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=57622 bytes_read=273425 bytes_retransmit=9 bytes_invalid=0 send_seq=3749 receive_seq=3749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2144.167 memavail=3579648 print_time=1647.557 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83532.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=57666 bytes_read=273601 bytes_retransmit=9 bytes_invalid=0 send_seq=3752 receive_seq=3752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2144.197 memavail=3579648 print_time=1648.557 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83533.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=57705 bytes_read=273787 bytes_retransmit=9 bytes_invalid=0 send_seq=3754 receive_seq=3754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.06 cputime=2144.225 memavail=3579716 print_time=1649.558 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83534.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=57749 bytes_read=273963 bytes_retransmit=9 bytes_invalid=0 send_seq=3757 receive_seq=3757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.06 cputime=2144.255 memavail=3579716 print_time=1650.558 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83535.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=57793 bytes_read=274139 bytes_retransmit=9 bytes_invalid=0 send_seq=3760 receive_seq=3760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.06 cputime=2144.284 memavail=3579844 print_time=1651.560 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83536.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=57837 bytes_read=274315 bytes_retransmit=9 bytes_invalid=0 send_seq=3763 receive_seq=3763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.06 cputime=2144.312 memavail=3579896 print_time=1652.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83537.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=57881 bytes_read=274491 bytes_retransmit=9 bytes_invalid=0 send_seq=3766 receive_seq=3766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.06 cputime=2144.341 memavail=3580016 print_time=1653.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83538.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=57925 bytes_read=274682 bytes_retransmit=9 bytes_invalid=0 send_seq=3769 receive_seq=3769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.06 cputime=2144.371 memavail=3580052 print_time=1654.565 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83539.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=57969 bytes_read=274858 bytes_retransmit=9 bytes_invalid=0 send_seq=3772 receive_seq=3772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.06 cputime=2144.401 memavail=3580204 print_time=1655.566 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83540.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=58013 bytes_read=275034 bytes_retransmit=9 bytes_invalid=0 send_seq=3775 receive_seq=3775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.06 cputime=2144.430 memavail=3580324 print_time=1656.567 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83541.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=58057 bytes_read=275210 bytes_retransmit=9 bytes_invalid=0 send_seq=3778 receive_seq=3778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.06 cputime=2144.458 memavail=3580112 print_time=1657.568 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83542.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=58101 bytes_read=275401 bytes_retransmit=9 bytes_invalid=0 send_seq=3781 receive_seq=3781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.06 cputime=2144.488 memavail=3580396 print_time=1658.569 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83543.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58145 bytes_read=275577 bytes_retransmit=9 bytes_invalid=0 send_seq=3784 receive_seq=3784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.05 cputime=2144.516 memavail=3580388 print_time=1659.571 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83544.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58189 bytes_read=275753 bytes_retransmit=9 bytes_invalid=0 send_seq=3787 receive_seq=3787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.05 cputime=2144.545 memavail=3580408 print_time=1660.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83545.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58233 bytes_read=275944 bytes_retransmit=9 bytes_invalid=0 send_seq=3790 receive_seq=3790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.05 cputime=2144.574 memavail=3580444 print_time=1661.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83546.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58277 bytes_read=276105 bytes_retransmit=9 bytes_invalid=0 send_seq=3793 receive_seq=3793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.05 cputime=2144.602 memavail=3580688 print_time=1662.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 83547.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58321 bytes_read=276281 bytes_retransmit=9 bytes_invalid=0 send_seq=3796 receive_seq=3796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.05 cputime=2144.631 memavail=3580796 print_time=1663.574 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83548.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=58365 bytes_read=276487 bytes_retransmit=9 bytes_invalid=0 send_seq=3799 receive_seq=3799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.05 cputime=2144.661 memavail=3580816 print_time=1664.577 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83549.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=58409 bytes_read=276648 bytes_retransmit=9 bytes_invalid=0 send_seq=3802 receive_seq=3802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.05 cputime=2144.691 memavail=3580904 print_time=1665.579 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83550.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=58453 bytes_read=276824 bytes_retransmit=9 bytes_invalid=0 send_seq=3805 receive_seq=3805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.05 cputime=2144.721 memavail=3580876 print_time=1666.584 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83551.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=58503 bytes_read=277015 bytes_retransmit=9 bytes_invalid=0 send_seq=3809 receive_seq=3808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.05 cputime=2144.751 memavail=3581004 print_time=1667.585 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83552.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=58542 bytes_read=277187 bytes_retransmit=9 bytes_invalid=0 send_seq=3811 receive_seq=3811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.05 cputime=2144.781 memavail=3581008 print_time=1668.588 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83553.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58643 bytes_read=277400 bytes_retransmit=9 bytes_invalid=0 send_seq=3816 receive_seq=3816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999072  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.04 cputime=2144.811 memavail=3581068 print_time=1669.591 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83554.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58747 bytes_read=277575 bytes_retransmit=9 bytes_invalid=0 send_seq=3821 receive_seq=3821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999071  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.04 cputime=2144.841 memavail=3581068 print_time=1670.589 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.2 pwm=0.000
Stats 83555.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58831 bytes_read=277739 bytes_retransmit=9 bytes_invalid=0 send_seq=3825 receive_seq=3825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.04 cputime=2144.871 memavail=3581004 print_time=1671.592 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83556.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58924 bytes_read=277935 bytes_retransmit=9 bytes_invalid=0 send_seq=3829 receive_seq=3829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.04 cputime=2144.902 memavail=3581064 print_time=1672.594 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83557.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=58968 bytes_read=278111 bytes_retransmit=9 bytes_invalid=0 send_seq=3832 receive_seq=3832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.04 cputime=2144.932 memavail=3581192 print_time=1673.595 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83558.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59075 bytes_read=278297 bytes_retransmit=9 bytes_invalid=0 send_seq=3837 receive_seq=3837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.04 cputime=2144.963 memavail=3581124 print_time=1674.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83559.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59208 bytes_read=278498 bytes_retransmit=9 bytes_invalid=0 send_seq=3842 receive_seq=3842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.04 cputime=2144.994 memavail=3581332 print_time=1675.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83560.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59247 bytes_read=278669 bytes_retransmit=9 bytes_invalid=0 send_seq=3844 receive_seq=3844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.04 cputime=2145.022 memavail=3581292 print_time=1676.598 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83561.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59291 bytes_read=278830 bytes_retransmit=9 bytes_invalid=0 send_seq=3847 receive_seq=3847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.04 cputime=2145.052 memavail=3581564 print_time=1677.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83562.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59335 bytes_read=279021 bytes_retransmit=9 bytes_invalid=0 send_seq=3850 receive_seq=3850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999164  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.04 cputime=2145.083 memavail=3581580 print_time=1678.601 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.3 pwm=0.000
Stats 83563.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59499 bytes_read=279227 bytes_retransmit=9 bytes_invalid=0 send_seq=3856 receive_seq=3856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999159  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.04 cputime=2145.118 memavail=3581740 print_time=1679.608 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83564.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59589 bytes_read=279393 bytes_retransmit=9 bytes_invalid=0 send_seq=3860 receive_seq=3860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999152  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.04 cputime=2145.149 memavail=3581752 print_time=1680.609 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83565.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59628 bytes_read=279579 bytes_retransmit=9 bytes_invalid=0 send_seq=3862 receive_seq=3862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999151  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.04 cputime=2145.179 memavail=3581684 print_time=1681.609 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83566.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59672 bytes_read=279755 bytes_retransmit=9 bytes_invalid=0 send_seq=3865 receive_seq=3865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999146  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.04 cputime=2145.208 memavail=3581816 print_time=1682.610 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83567.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=59716 bytes_read=279916 bytes_retransmit=9 bytes_invalid=0 send_seq=3868 receive_seq=3868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999140  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.04 cputime=2145.236 memavail=3581780 print_time=1683.611 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83568.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=59760 bytes_read=280122 bytes_retransmit=9 bytes_invalid=0 send_seq=3871 receive_seq=3871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999134  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.03 cputime=2145.267 memavail=3581796 print_time=1684.613 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83569.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=59804 bytes_read=280298 bytes_retransmit=9 bytes_invalid=0 send_seq=3874 receive_seq=3874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999136  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.03 cputime=2145.297 memavail=3581928 print_time=1685.614 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83570.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=59848 bytes_read=280459 bytes_retransmit=9 bytes_invalid=0 send_seq=3877 receive_seq=3877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999130  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.03 cputime=2145.326 memavail=3581940 print_time=1686.616 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83571.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=59892 bytes_read=280650 bytes_retransmit=9 bytes_invalid=0 send_seq=3880 receive_seq=3880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999124  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.03 cputime=2145.356 memavail=3581596 print_time=1687.619 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83572.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=59936 bytes_read=280826 bytes_retransmit=9 bytes_invalid=0 send_seq=3883 receive_seq=3883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999120  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.03 cputime=2145.385 memavail=3581600 print_time=1688.621 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83573.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=59980 bytes_read=281002 bytes_retransmit=9 bytes_invalid=0 send_seq=3886 receive_seq=3886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999123  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.11 cputime=2145.414 memavail=3581608 print_time=1689.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83574.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60024 bytes_read=281193 bytes_retransmit=9 bytes_invalid=0 send_seq=3889 receive_seq=3889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.11 cputime=2145.443 memavail=3581608 print_time=1690.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83575.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60068 bytes_read=281369 bytes_retransmit=9 bytes_invalid=0 send_seq=3892 receive_seq=3892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.11 cputime=2145.472 memavail=3581608 print_time=1691.627 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83576.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60112 bytes_read=281545 bytes_retransmit=9 bytes_invalid=0 send_seq=3895 receive_seq=3895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.11 cputime=2145.503 memavail=3581624 print_time=1692.627 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83577.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60156 bytes_read=281715 bytes_retransmit=9 bytes_invalid=0 send_seq=3898 receive_seq=3898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.11 cputime=2145.536 memavail=3581624 print_time=1693.632 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83578.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60200 bytes_read=281895 bytes_retransmit=9 bytes_invalid=0 send_seq=3901 receive_seq=3901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.10 cputime=2145.569 memavail=3581632 print_time=1694.634 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83579.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60244 bytes_read=282071 bytes_retransmit=9 bytes_invalid=0 send_seq=3904 receive_seq=3904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.10 cputime=2145.598 memavail=3581632 print_time=1695.634 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83580.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60283 bytes_read=282242 bytes_retransmit=9 bytes_invalid=0 send_seq=3906 receive_seq=3906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.10 cputime=2145.627 memavail=3581632 print_time=1696.638 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83581.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60327 bytes_read=282418 bytes_retransmit=9 bytes_invalid=0 send_seq=3909 receive_seq=3909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.10 cputime=2145.657 memavail=3582296 print_time=1697.638 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83582.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=60371 bytes_read=282594 bytes_retransmit=9 bytes_invalid=0 send_seq=3912 receive_seq=3912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.10 cputime=2145.686 memavail=3582344 print_time=1698.640 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83583.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=60478 bytes_read=282795 bytes_retransmit=9 bytes_invalid=0 send_seq=3917 receive_seq=3917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999089  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.09 cputime=2145.719 memavail=3582344 print_time=1699.643 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83584.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=60570 bytes_read=282981 bytes_retransmit=9 bytes_invalid=0 send_seq=3922 receive_seq=3922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=179999086  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.09 cputime=2145.751 memavail=3582352 print_time=1700.644 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83585.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=60672 bytes_read=283167 bytes_retransmit=9 bytes_invalid=0 send_seq=3927 receive_seq=3927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999083  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.09 cputime=2145.781 memavail=3582228 print_time=1701.645 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83586.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=60756 bytes_read=283348 bytes_retransmit=9 bytes_invalid=0 send_seq=3931 receive_seq=3931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.09 cputime=2145.811 memavail=3582228 print_time=1702.646 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83587.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=60887 bytes_read=283529 bytes_retransmit=9 bytes_invalid=0 send_seq=3935 receive_seq=3935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.09 cputime=2145.843 memavail=3582256 print_time=1703.648 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 83588.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=60945 bytes_read=283725 bytes_retransmit=9 bytes_invalid=0 send_seq=3939 receive_seq=3939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.08 cputime=2145.874 memavail=3582256 print_time=1704.648 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83589.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=61029 bytes_read=283906 bytes_retransmit=9 bytes_invalid=0 send_seq=3943 receive_seq=3943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999075  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.08 cputime=2145.903 memavail=3582264 print_time=1705.649 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83590.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=61073 bytes_read=284082 bytes_retransmit=9 bytes_invalid=0 send_seq=3946 receive_seq=3946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999073  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.08 cputime=2145.932 memavail=3582268 print_time=1706.650 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83591.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=61117 bytes_read=284258 bytes_retransmit=9 bytes_invalid=0 send_seq=3949 receive_seq=3949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.08 cputime=2145.961 memavail=3581776 print_time=1707.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83592.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=61161 bytes_read=284434 bytes_retransmit=9 bytes_invalid=0 send_seq=3952 receive_seq=3952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.08 cputime=2145.989 memavail=3581796 print_time=1708.654 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83593.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=61205 bytes_read=284625 bytes_retransmit=9 bytes_invalid=0 send_seq=3955 receive_seq=3955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.08 cputime=2146.019 memavail=3581804 print_time=1709.656 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83594.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=61249 bytes_read=284801 bytes_retransmit=9 bytes_invalid=0 send_seq=3958 receive_seq=3958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.08 cputime=2146.048 memavail=3581804 print_time=1710.657 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83595.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=61293 bytes_read=284977 bytes_retransmit=9 bytes_invalid=0 send_seq=3961 receive_seq=3961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999083  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.08 cputime=2146.077 memavail=3581812 print_time=1711.658 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83596.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=61337 bytes_read=285153 bytes_retransmit=9 bytes_invalid=0 send_seq=3964 receive_seq=3964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.08 cputime=2146.105 memavail=3581812 print_time=1712.660 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83597.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=61381 bytes_read=285329 bytes_retransmit=9 bytes_invalid=0 send_seq=3967 receive_seq=3967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.08 cputime=2146.135 memavail=3581816 print_time=1713.661 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83598.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61425 bytes_read=285520 bytes_retransmit=9 bytes_invalid=0 send_seq=3970 receive_seq=3970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999076  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.07 cputime=2146.165 memavail=3581816 print_time=1714.662 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83599.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61469 bytes_read=285696 bytes_retransmit=9 bytes_invalid=0 send_seq=3973 receive_seq=3973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999074  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.07 cputime=2146.195 memavail=3581836 print_time=1715.664 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83600.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61513 bytes_read=285872 bytes_retransmit=9 bytes_invalid=0 send_seq=3976 receive_seq=3976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.07 cputime=2146.223 memavail=3581848 print_time=1716.666 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83601.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61557 bytes_read=286057 bytes_retransmit=9 bytes_invalid=0 send_seq=3979 receive_seq=3979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999081  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.07 cputime=2146.253 memavail=3581856 print_time=1717.668 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 83602.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61601 bytes_read=286209 bytes_retransmit=9 bytes_invalid=0 send_seq=3982 receive_seq=3982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.07 cputime=2146.284 memavail=3581864 print_time=1718.671 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83603.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61645 bytes_read=286399 bytes_retransmit=9 bytes_invalid=0 send_seq=3985 receive_seq=3985 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999075  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.07 cputime=2146.316 memavail=3581864 print_time=1719.673 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83604.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61689 bytes_read=286590 bytes_retransmit=9 bytes_invalid=0 send_seq=3988 receive_seq=3988 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999072  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.07 cputime=2146.347 memavail=3581876 print_time=1720.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83605.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61733 bytes_read=286751 bytes_retransmit=9 bytes_invalid=0 send_seq=3991 receive_seq=3991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.07 cputime=2146.377 memavail=3581876 print_time=1721.677 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83606.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61777 bytes_read=286927 bytes_retransmit=9 bytes_invalid=0 send_seq=3994 receive_seq=3994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.07 cputime=2146.407 memavail=3581892 print_time=1722.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83607.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=61821 bytes_read=287118 bytes_retransmit=9 bytes_invalid=0 send_seq=3997 receive_seq=3997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.07 cputime=2146.438 memavail=3581900 print_time=1723.679 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83608.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=61865 bytes_read=287294 bytes_retransmit=9 bytes_invalid=0 send_seq=4000 receive_seq=4000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.06 cputime=2146.469 memavail=3581912 print_time=1724.682 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83609.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=61915 bytes_read=287486 bytes_retransmit=9 bytes_invalid=0 send_seq=4004 receive_seq=4004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.06 cputime=2146.500 memavail=3581916 print_time=1725.683 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83610.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=61967 bytes_read=287682 bytes_retransmit=9 bytes_invalid=0 send_seq=4008 receive_seq=4008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999065  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.06 cputime=2146.534 memavail=3581920 print_time=1726.686 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83611.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=62057 bytes_read=287848 bytes_retransmit=9 bytes_invalid=0 send_seq=4012 receive_seq=4012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999063  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.06 cputime=2146.566 memavail=3581676 print_time=1727.687 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83612.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=62101 bytes_read=288039 bytes_retransmit=9 bytes_invalid=0 send_seq=4015 receive_seq=4015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.06 cputime=2146.597 memavail=3581688 print_time=1728.687 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83613.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=62145 bytes_read=288230 bytes_retransmit=9 bytes_invalid=0 send_seq=4018 receive_seq=4018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.06 cputime=2146.628 memavail=3581744 print_time=1729.689 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83614.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=62189 bytes_read=288391 bytes_retransmit=9 bytes_invalid=0 send_seq=4021 receive_seq=4021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.06 cputime=2146.658 memavail=3581856 print_time=1730.691 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83615.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=62233 bytes_read=288582 bytes_retransmit=9 bytes_invalid=0 send_seq=4024 receive_seq=4024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.06 cputime=2146.690 memavail=3582064 print_time=1731.692 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83616.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=62277 bytes_read=288758 bytes_retransmit=9 bytes_invalid=0 send_seq=4027 receive_seq=4027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.06 cputime=2146.719 memavail=3582044 print_time=1732.693 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83617.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=62321 bytes_read=288919 bytes_retransmit=9 bytes_invalid=0 send_seq=4030 receive_seq=4030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.06 cputime=2146.751 memavail=3582136 print_time=1733.695 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83618.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=62365 bytes_read=289125 bytes_retransmit=9 bytes_invalid=0 send_seq=4033 receive_seq=4033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.05 cputime=2146.781 memavail=3582316 print_time=1734.695 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83619.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=62409 bytes_read=289301 bytes_retransmit=9 bytes_invalid=0 send_seq=4036 receive_seq=4036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.05 cputime=2146.811 memavail=3582368 print_time=1735.697 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83620.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=62453 bytes_read=289462 bytes_retransmit=9 bytes_invalid=0 send_seq=4039 receive_seq=4039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.05 cputime=2146.840 memavail=3582424 print_time=1736.697 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83621.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=62497 bytes_read=289653 bytes_retransmit=9 bytes_invalid=0 send_seq=4042 receive_seq=4042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.05 cputime=2146.870 memavail=3582312 print_time=1737.699 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83622.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=62661 bytes_read=289839 bytes_retransmit=9 bytes_invalid=0 send_seq=4047 receive_seq=4047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.05 cputime=2146.902 memavail=3582240 print_time=1738.700 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83623.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=62705 bytes_read=290015 bytes_retransmit=9 bytes_invalid=0 send_seq=4050 receive_seq=4050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.29 cputime=2146.930 memavail=3582272 print_time=1739.701 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 83624.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=62749 bytes_read=290206 bytes_retransmit=9 bytes_invalid=0 send_seq=4053 receive_seq=4053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.29 cputime=2146.959 memavail=3582356 print_time=1740.702 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83625.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=62793 bytes_read=290373 bytes_retransmit=9 bytes_invalid=0 send_seq=4056 receive_seq=4056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.29 cputime=2146.989 memavail=3582400 print_time=1741.704 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.7 pwm=0.000
Stats 83626.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=62837 bytes_read=290527 bytes_retransmit=9 bytes_invalid=0 send_seq=4059 receive_seq=4059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999054  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.29 cputime=2147.018 memavail=3582336 print_time=1742.705 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83627.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=62881 bytes_read=290718 bytes_retransmit=9 bytes_invalid=0 send_seq=4062 receive_seq=4062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.29 cputime=2147.047 memavail=3582296 print_time=1743.706 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83628.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=62925 bytes_read=290909 bytes_retransmit=9 bytes_invalid=0 send_seq=4065 receive_seq=4065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999055  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.26 cputime=2147.076 memavail=3582288 print_time=1744.708 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83629.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=62969 bytes_read=291070 bytes_retransmit=9 bytes_invalid=0 send_seq=4068 receive_seq=4068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999056  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.26 cputime=2147.105 memavail=3582404 print_time=1745.710 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83630.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=63013 bytes_read=291261 bytes_retransmit=9 bytes_invalid=0 send_seq=4071 receive_seq=4071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.26 cputime=2147.136 memavail=3582580 print_time=1746.711 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83631.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=63057 bytes_read=291437 bytes_retransmit=9 bytes_invalid=0 send_seq=4074 receive_seq=4074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.26 cputime=2147.164 memavail=3581616 print_time=1747.711 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83632.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=63101 bytes_read=291598 bytes_retransmit=9 bytes_invalid=0 send_seq=4077 receive_seq=4077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999057  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.26 cputime=2147.193 memavail=3581812 print_time=1748.713 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83633.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63159 bytes_read=291809 bytes_retransmit=9 bytes_invalid=0 send_seq=4081 receive_seq=4081 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.24 cputime=2147.224 memavail=3581860 print_time=1749.714 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83634.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63243 bytes_read=291990 bytes_retransmit=9 bytes_invalid=0 send_seq=4085 receive_seq=4085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.24 cputime=2147.252 memavail=3581932 print_time=1750.715 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.8 pwm=0.000
Stats 83635.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63287 bytes_read=292151 bytes_retransmit=9 bytes_invalid=0 send_seq=4088 receive_seq=4088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.24 cputime=2147.281 memavail=3582012 print_time=1751.717 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83636.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63331 bytes_read=292342 bytes_retransmit=9 bytes_invalid=0 send_seq=4091 receive_seq=4091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.24 cputime=2147.310 memavail=3581920 print_time=1752.717 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83637.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63375 bytes_read=292518 bytes_retransmit=9 bytes_invalid=0 send_seq=4094 receive_seq=4094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999059  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.24 cputime=2147.339 memavail=3582020 print_time=1753.718 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83638.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=63419 bytes_read=292694 bytes_retransmit=9 bytes_invalid=0 send_seq=4097 receive_seq=4097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999058  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.22 cputime=2147.368 memavail=3582052 print_time=1754.720 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83639.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=63458 bytes_read=292880 bytes_retransmit=9 bytes_invalid=0 send_seq=4099 receive_seq=4099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999060  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.22 cputime=2147.397 memavail=3582052 print_time=1755.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83640.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=63502 bytes_read=293056 bytes_retransmit=9 bytes_invalid=0 send_seq=4102 receive_seq=4102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.22 cputime=2147.426 memavail=3582084 print_time=1756.724 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83641.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=63546 bytes_read=293217 bytes_retransmit=9 bytes_invalid=0 send_seq=4105 receive_seq=4105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.22 cputime=2147.453 memavail=3582340 print_time=1757.725 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83642.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=63590 bytes_read=293408 bytes_retransmit=9 bytes_invalid=0 send_seq=4108 receive_seq=4108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999062  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.22 cputime=2147.482 memavail=3582264 print_time=1758.726 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83643.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63634 bytes_read=293599 bytes_retransmit=9 bytes_invalid=0 send_seq=4111 receive_seq=4111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999061  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.20 cputime=2147.482 memavail=3582268 print_time=1759.728 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83644.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63686 bytes_read=293780 bytes_retransmit=9 bytes_invalid=0 send_seq=4115 receive_seq=4115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.20 cputime=2147.513 memavail=3582276 print_time=1760.729 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83645.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63776 bytes_read=293961 bytes_retransmit=9 bytes_invalid=0 send_seq=4119 receive_seq=4119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.20 cputime=2147.542 memavail=3582276 print_time=1761.729 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83646.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63820 bytes_read=294137 bytes_retransmit=9 bytes_invalid=0 send_seq=4122 receive_seq=4122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.20 cputime=2147.573 memavail=3582276 print_time=1762.732 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83647.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=63864 bytes_read=294313 bytes_retransmit=9 bytes_invalid=0 send_seq=4125 receive_seq=4125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.20 cputime=2147.604 memavail=3582292 print_time=1763.732 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83648.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=63908 bytes_read=294504 bytes_retransmit=9 bytes_invalid=0 send_seq=4128 receive_seq=4128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.27 cputime=2147.633 memavail=3582292 print_time=1764.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83649.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=63952 bytes_read=294671 bytes_retransmit=9 bytes_invalid=0 send_seq=4131 receive_seq=4131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.27 cputime=2147.662 memavail=3582292 print_time=1765.736 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83650.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=63996 bytes_read=294840 bytes_retransmit=9 bytes_invalid=0 send_seq=4134 receive_seq=4134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.27 cputime=2147.690 memavail=3582316 print_time=1766.737 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83651.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=64040 bytes_read=295016 bytes_retransmit=9 bytes_invalid=0 send_seq=4137 receive_seq=4137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.27 cputime=2147.719 memavail=3581472 print_time=1767.740 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83652.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=64084 bytes_read=295192 bytes_retransmit=9 bytes_invalid=0 send_seq=4140 receive_seq=4140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999067  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.27 cputime=2147.749 memavail=3581476 print_time=1768.741 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83653.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=64128 bytes_read=295383 bytes_retransmit=9 bytes_invalid=0 send_seq=4143 receive_seq=4143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.25 cputime=2147.780 memavail=3581480 print_time=1769.744 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83654.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=64167 bytes_read=295554 bytes_retransmit=9 bytes_invalid=0 send_seq=4145 receive_seq=4145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999066  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.25 cputime=2147.808 memavail=3581524 print_time=1770.745 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83655.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=64211 bytes_read=295730 bytes_retransmit=9 bytes_invalid=0 send_seq=4148 receive_seq=4148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999065  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.25 cputime=2147.837 memavail=3581560 print_time=1771.745 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83656.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=64255 bytes_read=295906 bytes_retransmit=9 bytes_invalid=0 send_seq=4151 receive_seq=4151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.25 cputime=2147.869 memavail=3581680 print_time=1772.748 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83657.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=64313 bytes_read=296087 bytes_retransmit=9 bytes_invalid=0 send_seq=4155 receive_seq=4155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=179999065  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.25 cputime=2147.900 memavail=3581608 print_time=1773.748 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83658.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=64392 bytes_read=296283 bytes_retransmit=9 bytes_invalid=0 send_seq=4159 receive_seq=4159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999064  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.23 cputime=2147.929 memavail=3581612 print_time=1774.750 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83659.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=64436 bytes_read=296459 bytes_retransmit=9 bytes_invalid=0 send_seq=4162 receive_seq=4162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.23 cputime=2147.958 memavail=3581612 print_time=1775.751 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83660.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=64480 bytes_read=296635 bytes_retransmit=9 bytes_invalid=0 send_seq=4165 receive_seq=4165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.23 cputime=2147.988 memavail=3581616 print_time=1776.753 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83661.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=64524 bytes_read=296811 bytes_retransmit=9 bytes_invalid=0 send_seq=4168 receive_seq=4168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999068  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.23 cputime=2148.017 memavail=3581508 print_time=1777.754 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83662.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=64568 bytes_read=296987 bytes_retransmit=9 bytes_invalid=0 send_seq=4171 receive_seq=4171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999071  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.23 cputime=2148.045 memavail=3581516 print_time=1778.755 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83663.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=64640 bytes_read=297173 bytes_retransmit=9 bytes_invalid=0 send_seq=4174 receive_seq=4173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999071  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.21 cputime=2148.075 memavail=3581528 print_time=1779.757 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.9 pwm=0.000
Stats 83664.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=64660 bytes_read=297349 bytes_retransmit=9 bytes_invalid=0 send_seq=4176 receive_seq=4176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.21 cputime=2148.104 memavail=3581528 print_time=1780.758 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83665.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=64704 bytes_read=297525 bytes_retransmit=9 bytes_invalid=0 send_seq=4179 receive_seq=4179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999070  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.21 cputime=2148.134 memavail=3581540 print_time=1781.759 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83666.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=64748 bytes_read=297701 bytes_retransmit=9 bytes_invalid=0 send_seq=4182 receive_seq=4182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999069  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.21 cputime=2148.164 memavail=3581540 print_time=1782.760 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83667.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=64792 bytes_read=297877 bytes_retransmit=9 bytes_invalid=0 send_seq=4185 receive_seq=4185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999072  heater_bed: target=75 temp=75.0 pwm=0.000 sysload=0.21 cputime=2148.193 memavail=3581548 print_time=1783.762 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Autotune: raw=5.776978/0.700000 Ku=0.308558 Tu=230.100000  Kp=47.209444 Ki=0.410338 Kd=1357.861638
Stats 83668.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=64965 bytes_read=298073 bytes_retransmit=9 bytes_invalid=0 send_seq=4190 receive_seq=4189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=1 freq=179999070  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.27 cputime=2148.226 memavail=3581548 print_time=1784.763 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83669.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=65012 bytes_read=298265 bytes_retransmit=9 bytes_invalid=0 send_seq=4193 receive_seq=4193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.27 cputime=2148.254 memavail=3581548 print_time=1785.764 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83670.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=65056 bytes_read=298441 bytes_retransmit=9 bytes_invalid=0 send_seq=4196 receive_seq=4196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.27 cputime=2148.283 memavail=3581548 print_time=1786.766 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83671.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=65094 bytes_read=298617 bytes_retransmit=9 bytes_invalid=0 send_seq=4199 receive_seq=4199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.27 cputime=2148.312 memavail=3582244 print_time=1787.767 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83672.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=65138 bytes_read=298806 bytes_retransmit=9 bytes_invalid=0 send_seq=4202 receive_seq=4202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999071  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.27 cputime=2148.341 memavail=3582280 print_time=1788.768 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83673.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=65198 bytes_read=298977 bytes_retransmit=9 bytes_invalid=0 send_seq=4206 receive_seq=4206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.25 cputime=2148.369 memavail=3582224 print_time=1789.770 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83674.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=65242 bytes_read=299149 bytes_retransmit=9 bytes_invalid=0 send_seq=4209 receive_seq=4209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.25 cputime=2148.400 memavail=3582252 print_time=1790.772 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83675.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=65286 bytes_read=299340 bytes_retransmit=9 bytes_invalid=0 send_seq=4212 receive_seq=4212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999073  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.25 cputime=2148.430 memavail=3582380 print_time=1791.773 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.0 pwm=0.000
Stats 83676.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=65330 bytes_read=299501 bytes_retransmit=9 bytes_invalid=0 send_seq=4215 receive_seq=4215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.25 cputime=2148.458 memavail=3582384 print_time=1792.774 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83677.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=65390 bytes_read=299682 bytes_retransmit=9 bytes_invalid=0 send_seq=4219 receive_seq=4219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999072  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.25 cputime=2148.488 memavail=3582384 print_time=1793.775 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83678.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65434 bytes_read=299888 bytes_retransmit=9 bytes_invalid=0 send_seq=4222 receive_seq=4222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.31 cputime=2148.517 memavail=3582544 print_time=1794.777 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83679.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65478 bytes_read=300049 bytes_retransmit=9 bytes_invalid=0 send_seq=4225 receive_seq=4225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.31 cputime=2148.546 memavail=3582728 print_time=1795.779 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83680.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65522 bytes_read=300225 bytes_retransmit=9 bytes_invalid=0 send_seq=4228 receive_seq=4228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999080  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.31 cputime=2148.575 memavail=3582636 print_time=1796.780 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83681.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65582 bytes_read=300421 bytes_retransmit=9 bytes_invalid=0 send_seq=4232 receive_seq=4232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999089  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.31 cputime=2148.604 memavail=3582404 print_time=1797.780 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83682.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65626 bytes_read=300582 bytes_retransmit=9 bytes_invalid=0 send_seq=4235 receive_seq=4235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999087  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.31 cputime=2148.632 memavail=3582408 print_time=1798.782 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83683.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65670 bytes_read=300773 bytes_retransmit=9 bytes_invalid=0 send_seq=4238 receive_seq=4238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999086  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.29 cputime=2148.661 memavail=3582440 print_time=1799.782 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83684.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65720 bytes_read=300964 bytes_retransmit=9 bytes_invalid=0 send_seq=4241 receive_seq=4241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999085  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.29 cputime=2148.692 memavail=3582440 print_time=1800.784 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83685.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65780 bytes_read=301130 bytes_retransmit=9 bytes_invalid=0 send_seq=4245 receive_seq=4245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999085  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.29 cputime=2148.722 memavail=3582460 print_time=1801.785 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83686.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65824 bytes_read=301306 bytes_retransmit=9 bytes_invalid=0 send_seq=4248 receive_seq=4248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999090  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.29 cputime=2148.752 memavail=3582604 print_time=1802.786 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83687.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=65868 bytes_read=301497 bytes_retransmit=9 bytes_invalid=0 send_seq=4251 receive_seq=4251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=179999091  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.29 cputime=2148.782 memavail=3582612 print_time=1803.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83688.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=65945 bytes_read=301673 bytes_retransmit=9 bytes_invalid=0 send_seq=4254 receive_seq=4254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999088  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.26 cputime=2148.811 memavail=3582624 print_time=1804.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83689.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=66005 bytes_read=301869 bytes_retransmit=9 bytes_invalid=0 send_seq=4258 receive_seq=4258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999089  heater_bed: target=80 temp=75.7 pwm=0.700 sysload=0.26 cputime=2148.841 memavail=3582632 print_time=1805.790 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83690.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=66055 bytes_read=302045 bytes_retransmit=9 bytes_invalid=0 send_seq=4261 receive_seq=4261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999087  heater_bed: target=80 temp=75.8 pwm=0.700 sysload=0.26 cputime=2148.870 memavail=3582636 print_time=1806.791 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83691.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=66099 bytes_read=302206 bytes_retransmit=9 bytes_invalid=0 send_seq=4264 receive_seq=4264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999085  heater_bed: target=80 temp=75.9 pwm=0.700 sysload=0.26 cputime=2148.897 memavail=3582648 print_time=1807.792 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 83692.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=66146 bytes_read=302397 bytes_retransmit=9 bytes_invalid=0 send_seq=4267 receive_seq=4267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999085  heater_bed: target=80 temp=76.0 pwm=0.700 sysload=0.26 cputime=2148.927 memavail=3582760 print_time=1808.794 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83693.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66187 bytes_read=302588 bytes_retransmit=9 bytes_invalid=0 send_seq=4270 receive_seq=4270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999084  heater_bed: target=80 temp=76.0 pwm=0.700 sysload=0.24 cputime=2148.956 memavail=3582824 print_time=1809.795 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83694.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66266 bytes_read=302749 bytes_retransmit=9 bytes_invalid=0 send_seq=4274 receive_seq=4273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999084  heater_bed: target=80 temp=76.1 pwm=0.700 sysload=0.24 cputime=2148.986 memavail=3582840 print_time=1810.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83695.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66280 bytes_read=302940 bytes_retransmit=9 bytes_invalid=0 send_seq=4276 receive_seq=4276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999085  heater_bed: target=80 temp=76.2 pwm=0.700 sysload=0.24 cputime=2149.014 memavail=3582840 print_time=1811.798 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83696.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66330 bytes_read=303113 bytes_retransmit=9 bytes_invalid=0 send_seq=4279 receive_seq=4279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999086  heater_bed: target=80 temp=76.3 pwm=0.700 sysload=0.24 cputime=2149.043 memavail=3582844 print_time=1812.799 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83697.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66374 bytes_read=303264 bytes_retransmit=9 bytes_invalid=0 send_seq=4282 receive_seq=4282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999086  heater_bed: target=80 temp=76.4 pwm=0.700 sysload=0.24 cputime=2149.073 memavail=3582844 print_time=1813.801 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83698.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66420 bytes_read=303467 bytes_retransmit=9 bytes_invalid=0 send_seq=4285 receive_seq=4285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999088  heater_bed: target=80 temp=76.5 pwm=0.700 sysload=0.24 cputime=2149.103 memavail=3582844 print_time=1814.802 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83699.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66473 bytes_read=303643 bytes_retransmit=9 bytes_invalid=0 send_seq=4288 receive_seq=4288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999092  heater_bed: target=80 temp=76.6 pwm=0.700 sysload=0.22 cputime=2149.135 memavail=3582888 print_time=1815.804 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83700.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66571 bytes_read=303814 bytes_retransmit=9 bytes_invalid=0 send_seq=4293 receive_seq=4293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999092  heater_bed: target=80 temp=76.6 pwm=0.700 sysload=0.22 cputime=2149.166 memavail=3582892 print_time=1816.806 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83701.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66601 bytes_read=304000 bytes_retransmit=9 bytes_invalid=0 send_seq=4295 receive_seq=4295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999090  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.22 cputime=2149.197 memavail=3582648 print_time=1817.807 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83702.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=66670 bytes_read=304181 bytes_retransmit=9 bytes_invalid=0 send_seq=4299 receive_seq=4299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999089  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.22 cputime=2149.227 memavail=3582648 print_time=1818.808 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83703.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=66708 bytes_read=304357 bytes_retransmit=9 bytes_invalid=0 send_seq=4302 receive_seq=4302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999092  heater_bed: target=80 temp=76.9 pwm=0.700 sysload=0.22 cputime=2149.256 memavail=3582652 print_time=1819.808 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83704.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=66806 bytes_read=304558 bytes_retransmit=9 bytes_invalid=0 send_seq=4307 receive_seq=4307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999090  heater_bed: target=80 temp=77.0 pwm=0.700 sysload=0.20 cputime=2149.288 memavail=3582652 print_time=1820.812 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83705.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=66856 bytes_read=304734 bytes_retransmit=9 bytes_invalid=0 send_seq=4310 receive_seq=4310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999089  heater_bed: target=80 temp=77.1 pwm=0.700 sysload=0.20 cputime=2149.317 memavail=3582672 print_time=1821.812 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83706.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=66916 bytes_read=304900 bytes_retransmit=9 bytes_invalid=0 send_seq=4314 receive_seq=4314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999088  heater_bed: target=80 temp=77.2 pwm=0.700 sysload=0.20 cputime=2149.346 memavail=3582684 print_time=1822.813 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83707.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=66960 bytes_read=305091 bytes_retransmit=9 bytes_invalid=0 send_seq=4317 receive_seq=4317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999122  heater_bed: target=80 temp=77.3 pwm=0.700 sysload=0.20 cputime=2149.375 memavail=3582684 print_time=1823.813 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83708.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67007 bytes_read=305282 bytes_retransmit=9 bytes_invalid=0 send_seq=4320 receive_seq=4320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999118  heater_bed: target=80 temp=77.4 pwm=0.700 sysload=0.20 cputime=2149.404 memavail=3582684 print_time=1824.815 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83709.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67048 bytes_read=305443 bytes_retransmit=9 bytes_invalid=0 send_seq=4323 receive_seq=4323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999118  heater_bed: target=80 temp=77.5 pwm=0.700 sysload=0.19 cputime=2149.433 memavail=3582684 print_time=1825.816 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83710.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67166 bytes_read=305639 bytes_retransmit=9 bytes_invalid=0 send_seq=4328 receive_seq=4327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=77.6 pwm=0.700 sysload=0.19 cputime=2149.464 memavail=3582684 print_time=1826.819 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83711.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67201 bytes_read=305820 bytes_retransmit=9 bytes_invalid=0 send_seq=4331 receive_seq=4331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999112  heater_bed: target=80 temp=77.7 pwm=0.700 sysload=0.19 cputime=2149.493 memavail=3582608 print_time=1827.819 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83712.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67245 bytes_read=305981 bytes_retransmit=9 bytes_invalid=0 send_seq=4334 receive_seq=4334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=77.7 pwm=0.700 sysload=0.19 cputime=2149.523 memavail=3582612 print_time=1828.821 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83713.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67289 bytes_read=306187 bytes_retransmit=9 bytes_invalid=0 send_seq=4337 receive_seq=4337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999108  heater_bed: target=80 temp=77.8 pwm=0.700 sysload=0.19 cputime=2149.555 memavail=3582616 print_time=1829.825 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83714.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67333 bytes_read=306363 bytes_retransmit=9 bytes_invalid=0 send_seq=4340 receive_seq=4340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=77.9 pwm=0.700 sysload=0.17 cputime=2149.584 memavail=3582616 print_time=1830.827 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83715.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67393 bytes_read=306544 bytes_retransmit=9 bytes_invalid=0 send_seq=4344 receive_seq=4344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=78.1 pwm=0.700 sysload=0.17 cputime=2149.617 memavail=3582616 print_time=1831.831 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83716.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67556 bytes_read=306735 bytes_retransmit=9 bytes_invalid=0 send_seq=4350 receive_seq=4350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=78.1 pwm=0.700 sysload=0.17 cputime=2149.647 memavail=3582616 print_time=1832.835 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83717.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=67606 bytes_read=306911 bytes_retransmit=9 bytes_invalid=0 send_seq=4353 receive_seq=4353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=78.2 pwm=0.700 sysload=0.17 cputime=2149.678 memavail=3582616 print_time=1833.838 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 83718.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=67650 bytes_read=307102 bytes_retransmit=9 bytes_invalid=0 send_seq=4356 receive_seq=4356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=80 temp=78.3 pwm=0.700 sysload=0.17 cputime=2149.709 memavail=3582760 print_time=1834.840 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83719.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=67729 bytes_read=307278 bytes_retransmit=9 bytes_invalid=0 send_seq=4360 receive_seq=4359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999092  heater_bed: target=80 temp=78.4 pwm=0.700 sysload=0.16 cputime=2149.739 memavail=3582760 print_time=1835.844 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83720.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=67749 bytes_read=307449 bytes_retransmit=9 bytes_invalid=0 send_seq=4362 receive_seq=4362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999091  heater_bed: target=80 temp=78.5 pwm=0.700 sysload=0.16 cputime=2149.769 memavail=3582652 print_time=1836.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83721.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=67793 bytes_read=307614 bytes_retransmit=9 bytes_invalid=0 send_seq=4365 receive_seq=4365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=179999088  heater_bed: target=80 temp=78.6 pwm=0.700 sysload=0.16 cputime=2149.800 memavail=3582332 print_time=1837.850 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83722.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=67869 bytes_read=307789 bytes_retransmit=9 bytes_invalid=0 send_seq=4368 receive_seq=4368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999086  heater_bed: target=80 temp=78.7 pwm=0.700 sysload=0.16 cputime=2149.830 memavail=3582332 print_time=1838.853 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83723.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=67929 bytes_read=307985 bytes_retransmit=9 bytes_invalid=0 send_seq=4372 receive_seq=4372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999083  heater_bed: target=80 temp=78.8 pwm=0.700 sysload=0.14 cputime=2149.863 memavail=3582220 print_time=1839.857 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83724.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=67965 bytes_read=308156 bytes_retransmit=9 bytes_invalid=0 send_seq=4374 receive_seq=4374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999081  heater_bed: target=80 temp=78.9 pwm=0.700 sysload=0.14 cputime=2149.894 memavail=3582104 print_time=1840.860 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 83725.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=68012 bytes_read=308347 bytes_retransmit=9 bytes_invalid=0 send_seq=4377 receive_seq=4377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999080  heater_bed: target=80 temp=79.0 pwm=0.700 sysload=0.14 cputime=2149.926 memavail=3581988 print_time=1841.864 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83726.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=68057 bytes_read=308519 bytes_retransmit=9 bytes_invalid=0 send_seq=4380 receive_seq=4380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999081  heater_bed: target=80 temp=79.1 pwm=0.700 sysload=0.14 cputime=2149.955 memavail=3582020 print_time=1842.869 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83727.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=68117 bytes_read=308700 bytes_retransmit=9 bytes_invalid=0 send_seq=4384 receive_seq=4384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=79.2 pwm=0.700 sysload=0.14 cputime=2149.986 memavail=3582028 print_time=1843.872 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83728.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=68161 bytes_read=308901 bytes_retransmit=9 bytes_invalid=0 send_seq=4387 receive_seq=4386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=6 stalled_bytes=19 freq=179999078  heater_bed: target=80 temp=79.3 pwm=0.700 sysload=0.13 cputime=2150.017 memavail=3581908 print_time=1844.870 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83729.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=68211 bytes_read=309067 bytes_retransmit=9 bytes_invalid=0 send_seq=4390 receive_seq=4390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999076  heater_bed: target=80 temp=79.4 pwm=0.700 sysload=0.13 cputime=2150.046 memavail=3581808 print_time=1845.872 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83730.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=68255 bytes_read=309243 bytes_retransmit=9 bytes_invalid=0 send_seq=4393 receive_seq=4393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999076  heater_bed: target=80 temp=79.5 pwm=0.700 sysload=0.13 cputime=2150.076 memavail=3581816 print_time=1846.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83731.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=68365 bytes_read=309434 bytes_retransmit=9 bytes_invalid=0 send_seq=4397 receive_seq=4396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=179999077  heater_bed: target=80 temp=79.6 pwm=0.700 sysload=0.13 cputime=2150.108 memavail=3582000 print_time=1847.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83732.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=68417 bytes_read=309600 bytes_retransmit=9 bytes_invalid=0 send_seq=4400 receive_seq=4400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999077  heater_bed: target=80 temp=79.7 pwm=0.700 sysload=0.13 cputime=2150.137 memavail=3582028 print_time=1848.874 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83733.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68461 bytes_read=309791 bytes_retransmit=9 bytes_invalid=0 send_seq=4403 receive_seq=4403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999078  heater_bed: target=80 temp=79.8 pwm=0.700 sysload=0.13 cputime=2150.169 memavail=3582032 print_time=1849.876 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83734.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68499 bytes_read=309982 bytes_retransmit=9 bytes_invalid=0 send_seq=4406 receive_seq=4406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999076  heater_bed: target=80 temp=79.9 pwm=0.700 sysload=0.12 cputime=2150.199 memavail=3581916 print_time=1850.877 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83735.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68543 bytes_read=310143 bytes_retransmit=9 bytes_invalid=0 send_seq=4409 receive_seq=4409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=80 temp=80.0 pwm=0.700 sysload=0.12 cputime=2150.227 memavail=3581800 print_time=1851.881 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Autotune: raw=-5.756750/0.700000 Ku=0.309643 Tu=235.200000  Kp=47.375327 Ki=0.402851 Kd=1392.834611
Stats 83736.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68731 bytes_read=310339 bytes_retransmit=9 bytes_invalid=0 send_seq=4416 receive_seq=4416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.12 cputime=2150.261 memavail=3581812 print_time=1852.883 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83737.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=68825 bytes_read=310530 bytes_retransmit=9 bytes_invalid=0 send_seq=4420 receive_seq=4419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.12 cputime=2150.293 memavail=3581636 print_time=1853.883 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83738.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=68916 bytes_read=310711 bytes_retransmit=9 bytes_invalid=0 send_seq=4424 receive_seq=4423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.12 cputime=2150.324 memavail=3581640 print_time=1854.885 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83739.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=68957 bytes_read=310907 bytes_retransmit=9 bytes_invalid=0 send_seq=4427 receive_seq=4427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.11 cputime=2150.354 memavail=3581672 print_time=1855.886 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83740.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=68995 bytes_read=311083 bytes_retransmit=9 bytes_invalid=0 send_seq=4430 receive_seq=4430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.11 cputime=2150.383 memavail=3581516 print_time=1856.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83741.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=69045 bytes_read=311244 bytes_retransmit=9 bytes_invalid=0 send_seq=4433 receive_seq=4433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.11 cputime=2150.413 memavail=3581532 print_time=1857.890 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83742.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=69139 bytes_read=311435 bytes_retransmit=9 bytes_invalid=0 send_seq=4437 receive_seq=4436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.11 cputime=2150.446 memavail=3581412 print_time=1858.890 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83743.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=69174 bytes_read=311631 bytes_retransmit=9 bytes_invalid=0 send_seq=4440 receive_seq=4440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999076  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.11 cputime=2150.476 memavail=3581292 print_time=1859.892 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83744.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=69278 bytes_read=311795 bytes_retransmit=9 bytes_invalid=0 send_seq=4445 receive_seq=4445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999076  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.10 cputime=2150.508 memavail=3581252 print_time=1860.895 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83745.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=69372 bytes_read=311981 bytes_retransmit=9 bytes_invalid=0 send_seq=4449 receive_seq=4449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999075  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2150.542 memavail=3581132 print_time=1861.896 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.4 pwm=0.000
Stats 83746.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=69521 bytes_read=312172 bytes_retransmit=9 bytes_invalid=0 send_seq=4455 receive_seq=4455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999075  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2150.578 memavail=3581012 print_time=1862.900 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83747.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=69658 bytes_read=312348 bytes_retransmit=9 bytes_invalid=0 send_seq=4461 receive_seq=4461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=179999075  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2150.614 memavail=3581188 print_time=1863.901 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83748.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=69891 bytes_read=312569 bytes_retransmit=9 bytes_invalid=0 send_seq=4467 receive_seq=4467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999073  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2150.649 memavail=3581188 print_time=1864.903 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83749.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=69981 bytes_read=312755 bytes_retransmit=9 bytes_invalid=0 send_seq=4472 receive_seq=4472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999076  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.681 memavail=3581236 print_time=1865.905 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83750.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=70022 bytes_read=312916 bytes_retransmit=9 bytes_invalid=0 send_seq=4475 receive_seq=4475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.710 memavail=3581272 print_time=1866.904 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83751.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=70066 bytes_read=313107 bytes_retransmit=9 bytes_invalid=0 send_seq=4478 receive_seq=4478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.734 memavail=3581464 print_time=1867.905 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83752.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=70166 bytes_read=313283 bytes_retransmit=9 bytes_invalid=0 send_seq=4482 receive_seq=4481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.760 memavail=3581556 print_time=1868.908 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83753.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=70309 bytes_read=313474 bytes_retransmit=9 bytes_invalid=0 send_seq=4488 receive_seq=4487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.793 memavail=3581700 print_time=1869.910 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83754.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=70344 bytes_read=313670 bytes_retransmit=9 bytes_invalid=0 send_seq=4491 receive_seq=4491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.823 memavail=3581816 print_time=1870.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83755.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=70388 bytes_read=313846 bytes_retransmit=9 bytes_invalid=0 send_seq=4494 receive_seq=4494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999081  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.853 memavail=3581844 print_time=1871.914 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83756.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=70432 bytes_read=314007 bytes_retransmit=9 bytes_invalid=0 send_seq=4497 receive_seq=4497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.882 memavail=3581732 print_time=1872.914 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83757.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=70528 bytes_read=314208 bytes_retransmit=9 bytes_invalid=0 send_seq=4502 receive_seq=4502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.915 memavail=3581820 print_time=1873.916 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.5 pwm=0.000
Stats 83758.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=70628 bytes_read=314399 bytes_retransmit=9 bytes_invalid=0 send_seq=4506 receive_seq=4505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999081  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2150.947 memavail=3581904 print_time=1874.918 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83759.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=70771 bytes_read=314575 bytes_retransmit=9 bytes_invalid=0 send_seq=4512 receive_seq=4511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999081  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.08 cputime=2150.979 memavail=3582000 print_time=1875.920 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83760.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=70806 bytes_read=314771 bytes_retransmit=9 bytes_invalid=0 send_seq=4515 receive_seq=4515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999081  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.08 cputime=2151.010 memavail=3582112 print_time=1876.921 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83761.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=70850 bytes_read=314947 bytes_retransmit=9 bytes_invalid=0 send_seq=4518 receive_seq=4518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999081  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.08 cputime=2151.039 memavail=3582508 print_time=1877.921 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83762.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=70894 bytes_read=315108 bytes_retransmit=9 bytes_invalid=0 send_seq=4521 receive_seq=4521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999083  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.08 cputime=2151.069 memavail=3582416 print_time=1878.923 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83763.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=70938 bytes_read=315314 bytes_retransmit=9 bytes_invalid=0 send_seq=4524 receive_seq=4524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999086  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.08 cputime=2151.100 memavail=3582448 print_time=1879.926 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83764.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=71080 bytes_read=315505 bytes_retransmit=9 bytes_invalid=0 send_seq=4530 receive_seq=4530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999085  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2151.133 memavail=3582488 print_time=1880.929 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83765.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=71124 bytes_read=315681 bytes_retransmit=9 bytes_invalid=0 send_seq=4533 receive_seq=4533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999085  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2151.162 memavail=3582496 print_time=1881.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83766.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=71162 bytes_read=315857 bytes_retransmit=9 bytes_invalid=0 send_seq=4536 receive_seq=4536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999084  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.07 cputime=2151.192 memavail=3582676 print_time=1882.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.6 pwm=0.000
Stats 83767.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=71206 bytes_read=316033 bytes_retransmit=9 bytes_invalid=0 send_seq=4539 receive_seq=4539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999083  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.07 cputime=2151.222 memavail=3582672 print_time=1883.931 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83768.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=71250 bytes_read=316216 bytes_retransmit=9 bytes_invalid=0 send_seq=4542 receive_seq=4542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999084  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.07 cputime=2151.253 memavail=3582760 print_time=1884.931 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83769.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=71294 bytes_read=316384 bytes_retransmit=9 bytes_invalid=0 send_seq=4545 receive_seq=4545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999085  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.07 cputime=2151.282 memavail=3582832 print_time=1885.933 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83770.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=71338 bytes_read=316560 bytes_retransmit=9 bytes_invalid=0 send_seq=4548 receive_seq=4548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999084  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.07 cputime=2151.312 memavail=3582860 print_time=1886.935 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83771.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=71382 bytes_read=316736 bytes_retransmit=9 bytes_invalid=0 send_seq=4551 receive_seq=4551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999084  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.07 cputime=2151.343 memavail=3582900 print_time=1887.939 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83772.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=71432 bytes_read=316912 bytes_retransmit=9 bytes_invalid=0 send_seq=4554 receive_seq=4554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999084  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.07 cputime=2151.373 memavail=3583032 print_time=1888.941 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83773.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=71470 bytes_read=317103 bytes_retransmit=9 bytes_invalid=0 send_seq=4557 receive_seq=4557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999083  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.07 cputime=2151.402 memavail=3582968 print_time=1889.942 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83774.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=71520 bytes_read=317274 bytes_retransmit=9 bytes_invalid=0 send_seq=4560 receive_seq=4559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=19 freq=179999082  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.06 cputime=2151.433 memavail=3582980 print_time=1890.946 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83775.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=71564 bytes_read=317455 bytes_retransmit=9 bytes_invalid=0 send_seq=4563 receive_seq=4563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999082  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.06 cputime=2151.463 memavail=3582988 print_time=1891.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83776.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=71602 bytes_read=317631 bytes_retransmit=9 bytes_invalid=0 send_seq=4566 receive_seq=4566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999081  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.06 cputime=2151.492 memavail=3582984 print_time=1892.948 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83777.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=71652 bytes_read=317807 bytes_retransmit=9 bytes_invalid=0 send_seq=4569 receive_seq=4569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.06 cputime=2151.521 memavail=3582984 print_time=1893.948 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83778.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=71696 bytes_read=317998 bytes_retransmit=9 bytes_invalid=0 send_seq=4572 receive_seq=4572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.06 cputime=2151.551 memavail=3582996 print_time=1894.950 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83779.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=71734 bytes_read=318174 bytes_retransmit=9 bytes_invalid=0 send_seq=4575 receive_seq=4575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999081  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.06 cputime=2151.581 memavail=3583000 print_time=1895.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83780.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=71784 bytes_read=318350 bytes_retransmit=9 bytes_invalid=0 send_seq=4578 receive_seq=4578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.06 cputime=2151.611 memavail=3583008 print_time=1896.953 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83781.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=71828 bytes_read=318526 bytes_retransmit=9 bytes_invalid=0 send_seq=4581 receive_seq=4581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.06 cputime=2151.641 memavail=3583024 print_time=1897.956 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83782.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=71866 bytes_read=318702 bytes_retransmit=9 bytes_invalid=0 send_seq=4584 receive_seq=4584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999076  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.06 cputime=2151.671 memavail=3583024 print_time=1898.956 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83783.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=71910 bytes_read=318893 bytes_retransmit=9 bytes_invalid=0 send_seq=4587 receive_seq=4587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999073  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.06 cputime=2151.700 memavail=3583024 print_time=1899.957 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83784.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=71966 bytes_read=319085 bytes_retransmit=9 bytes_invalid=0 send_seq=4591 receive_seq=4591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999071  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.05 cputime=2151.729 memavail=3583024 print_time=1900.958 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83785.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72004 bytes_read=319261 bytes_retransmit=9 bytes_invalid=0 send_seq=4594 receive_seq=4594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999073  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.05 cputime=2151.759 memavail=3583024 print_time=1901.960 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.7 pwm=0.000
Stats 83786.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72054 bytes_read=319437 bytes_retransmit=9 bytes_invalid=0 send_seq=4597 receive_seq=4597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999074  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.05 cputime=2151.788 memavail=3583040 print_time=1902.961 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83787.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72092 bytes_read=319613 bytes_retransmit=9 bytes_invalid=0 send_seq=4600 receive_seq=4600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999074  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.05 cputime=2151.817 memavail=3583048 print_time=1903.962 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83788.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72142 bytes_read=319804 bytes_retransmit=9 bytes_invalid=0 send_seq=4603 receive_seq=4603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999075  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.05 cputime=2151.848 memavail=3583056 print_time=1904.964 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83789.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72186 bytes_read=319980 bytes_retransmit=9 bytes_invalid=0 send_seq=4606 receive_seq=4606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999075  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.05 cputime=2151.877 memavail=3583056 print_time=1905.965 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83790.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72230 bytes_read=320156 bytes_retransmit=9 bytes_invalid=0 send_seq=4609 receive_seq=4609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.05 cputime=2151.905 memavail=3583072 print_time=1906.967 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83791.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72274 bytes_read=320332 bytes_retransmit=9 bytes_invalid=0 send_seq=4612 receive_seq=4612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.05 cputime=2151.935 memavail=3583492 print_time=1907.969 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83792.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72312 bytes_read=320497 bytes_retransmit=9 bytes_invalid=0 send_seq=4615 receive_seq=4615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.05 cputime=2151.965 memavail=3583492 print_time=1908.970 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83793.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72356 bytes_read=320698 bytes_retransmit=9 bytes_invalid=0 send_seq=4618 receive_seq=4618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.05 cputime=2151.993 memavail=3583492 print_time=1909.971 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83794.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72400 bytes_read=320859 bytes_retransmit=9 bytes_invalid=0 send_seq=4621 receive_seq=4621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.04 cputime=2152.021 memavail=3583384 print_time=1910.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83795.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72450 bytes_read=321035 bytes_retransmit=9 bytes_invalid=0 send_seq=4624 receive_seq=4624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.04 cputime=2152.050 memavail=3583396 print_time=1911.975 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83796.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72549 bytes_read=321231 bytes_retransmit=9 bytes_invalid=0 send_seq=4628 receive_seq=4628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.04 cputime=2152.080 memavail=3583396 print_time=1912.977 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83797.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=72595 bytes_read=321392 bytes_retransmit=9 bytes_invalid=0 send_seq=4631 receive_seq=4631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.04 cputime=2152.108 memavail=3583408 print_time=1913.978 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83798.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=72639 bytes_read=321583 bytes_retransmit=9 bytes_invalid=0 send_seq=4634 receive_seq=4634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.04 cputime=2152.137 memavail=3583416 print_time=1914.979 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83799.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=72683 bytes_read=321774 bytes_retransmit=9 bytes_invalid=0 send_seq=4637 receive_seq=4637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.04 cputime=2152.165 memavail=3583420 print_time=1915.980 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.8 pwm=0.000
Stats 83800.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=72727 bytes_read=321935 bytes_retransmit=9 bytes_invalid=0 send_seq=4640 receive_seq=4640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.04 cputime=2152.193 memavail=3583432 print_time=1916.981 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83801.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=72771 bytes_read=322111 bytes_retransmit=9 bytes_invalid=0 send_seq=4643 receive_seq=4643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.04 cputime=2152.221 memavail=3583724 print_time=1917.984 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83802.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=72815 bytes_read=322297 bytes_retransmit=9 bytes_invalid=0 send_seq=4646 receive_seq=4645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.04 cputime=2152.250 memavail=3583732 print_time=1918.985 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83803.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=72859 bytes_read=322478 bytes_retransmit=9 bytes_invalid=0 send_seq=4649 receive_seq=4649 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.04 cputime=2152.279 memavail=3583732 print_time=1919.986 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83804.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=72903 bytes_read=322669 bytes_retransmit=9 bytes_invalid=0 send_seq=4652 receive_seq=4652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.04 cputime=2152.309 memavail=3583740 print_time=1920.989 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83805.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=72947 bytes_read=322845 bytes_retransmit=9 bytes_invalid=0 send_seq=4655 receive_seq=4655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.04 cputime=2152.338 memavail=3583748 print_time=1921.989 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83806.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=72991 bytes_read=323006 bytes_retransmit=9 bytes_invalid=0 send_seq=4658 receive_seq=4658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999077  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.04 cputime=2152.368 memavail=3583756 print_time=1922.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83807.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73035 bytes_read=323197 bytes_retransmit=9 bytes_invalid=0 send_seq=4661 receive_seq=4661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.04 cputime=2152.396 memavail=3583764 print_time=1923.992 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.9 pwm=0.000
Stats 83808.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73079 bytes_read=323388 bytes_retransmit=9 bytes_invalid=0 send_seq=4664 receive_seq=4664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.04 cputime=2152.425 memavail=3583768 print_time=1924.995 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83809.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73123 bytes_read=323549 bytes_retransmit=9 bytes_invalid=0 send_seq=4667 receive_seq=4667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999078  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.03 cputime=2152.454 memavail=3583776 print_time=1925.995 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83810.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73167 bytes_read=323740 bytes_retransmit=9 bytes_invalid=0 send_seq=4670 receive_seq=4670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.03 cputime=2152.483 memavail=3583776 print_time=1926.997 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83811.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73211 bytes_read=323916 bytes_retransmit=9 bytes_invalid=0 send_seq=4673 receive_seq=4673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999079  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.03 cputime=2152.513 memavail=3583796 print_time=1927.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83812.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73255 bytes_read=324077 bytes_retransmit=9 bytes_invalid=0 send_seq=4676 receive_seq=4676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999080  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.03 cputime=2152.542 memavail=3583796 print_time=1928.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83813.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73299 bytes_read=324283 bytes_retransmit=9 bytes_invalid=0 send_seq=4679 receive_seq=4679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999082  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.03 cputime=2152.572 memavail=3583800 print_time=1930.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83814.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73343 bytes_read=324459 bytes_retransmit=9 bytes_invalid=0 send_seq=4682 receive_seq=4682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999083  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.11 cputime=2152.602 memavail=3583816 print_time=1931.003 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83815.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73387 bytes_read=324619 bytes_retransmit=9 bytes_invalid=0 send_seq=4685 receive_seq=4685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999085  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.11 cputime=2152.630 memavail=3583824 print_time=1932.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83816.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73456 bytes_read=324793 bytes_retransmit=9 bytes_invalid=0 send_seq=4688 receive_seq=4687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999087  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.11 cputime=2152.660 memavail=3583832 print_time=1933.007 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83817.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73476 bytes_read=324965 bytes_retransmit=9 bytes_invalid=0 send_seq=4690 receive_seq=4690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999087  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.11 cputime=2152.688 memavail=3583832 print_time=1934.008 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83818.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73520 bytes_read=325141 bytes_retransmit=9 bytes_invalid=0 send_seq=4693 receive_seq=4693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999087  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.11 cputime=2152.717 memavail=3583836 print_time=1935.010 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83819.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73564 bytes_read=325332 bytes_retransmit=9 bytes_invalid=0 send_seq=4696 receive_seq=4696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.10 cputime=2152.748 memavail=3583836 print_time=1936.012 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83820.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73608 bytes_read=325508 bytes_retransmit=9 bytes_invalid=0 send_seq=4699 receive_seq=4699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.10 cputime=2152.778 memavail=3583860 print_time=1937.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83821.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73719 bytes_read=325674 bytes_retransmit=9 bytes_invalid=0 send_seq=4704 receive_seq=4703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.10 cputime=2152.808 memavail=3583616 print_time=1938.017 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83822.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=73733 bytes_read=325865 bytes_retransmit=9 bytes_invalid=0 send_seq=4706 receive_seq=4706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.10 cputime=2152.838 memavail=3583616 print_time=1939.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83823.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=73777 bytes_read=326056 bytes_retransmit=9 bytes_invalid=0 send_seq=4709 receive_seq=4709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.10 cputime=2152.868 memavail=3583624 print_time=1940.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83824.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=73881 bytes_read=326227 bytes_retransmit=9 bytes_invalid=0 send_seq=4714 receive_seq=4714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.09 cputime=2152.898 memavail=3583632 print_time=1941.020 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83825.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=73911 bytes_read=326413 bytes_retransmit=9 bytes_invalid=0 send_seq=4716 receive_seq=4716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999099  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.09 cputime=2152.926 memavail=3583652 print_time=1942.021 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83826.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=73964 bytes_read=326589 bytes_retransmit=9 bytes_invalid=0 send_seq=4719 receive_seq=4719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.09 cputime=2152.954 memavail=3583656 print_time=1943.022 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83827.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=74008 bytes_read=326750 bytes_retransmit=9 bytes_invalid=0 send_seq=4722 receive_seq=4722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.09 cputime=2152.983 memavail=3583664 print_time=1944.024 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83828.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=74052 bytes_read=326956 bytes_retransmit=9 bytes_invalid=0 send_seq=4725 receive_seq=4725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.09 cputime=2153.013 memavail=3583668 print_time=1945.026 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83829.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=74096 bytes_read=327132 bytes_retransmit=9 bytes_invalid=0 send_seq=4728 receive_seq=4728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.08 cputime=2153.042 memavail=3583588 print_time=1946.028 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83830.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=74134 bytes_read=327308 bytes_retransmit=9 bytes_invalid=0 send_seq=4731 receive_seq=4731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.08 cputime=2153.071 memavail=3583716 print_time=1947.029 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83831.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=74178 bytes_read=327484 bytes_retransmit=9 bytes_invalid=0 send_seq=4734 receive_seq=4734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.08 cputime=2153.099 memavail=3583816 print_time=1948.030 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83832.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=74228 bytes_read=327660 bytes_retransmit=9 bytes_invalid=0 send_seq=4737 receive_seq=4737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.08 cputime=2153.131 memavail=3583996 print_time=1949.032 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 83833.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74258 bytes_read=327846 bytes_retransmit=9 bytes_invalid=0 send_seq=4739 receive_seq=4739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999099  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.08 cputime=2153.160 memavail=3583984 print_time=1950.033 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83834.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74311 bytes_read=328022 bytes_retransmit=9 bytes_invalid=0 send_seq=4742 receive_seq=4742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.08 cputime=2153.189 memavail=3584068 print_time=1951.035 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83835.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74349 bytes_read=328198 bytes_retransmit=9 bytes_invalid=0 send_seq=4745 receive_seq=4745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.08 cputime=2153.219 memavail=3584216 print_time=1952.037 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83836.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74399 bytes_read=328374 bytes_retransmit=9 bytes_invalid=0 send_seq=4748 receive_seq=4748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.08 cputime=2153.247 memavail=3584344 print_time=1953.039 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83837.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74437 bytes_read=328550 bytes_retransmit=9 bytes_invalid=0 send_seq=4751 receive_seq=4751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.08 cputime=2153.277 memavail=3584276 print_time=1954.041 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83838.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74487 bytes_read=328741 bytes_retransmit=9 bytes_invalid=0 send_seq=4754 receive_seq=4754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.08 cputime=2153.305 memavail=3584460 print_time=1955.043 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 83839.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74525 bytes_read=328913 bytes_retransmit=9 bytes_invalid=0 send_seq=4757 receive_seq=4757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.07 cputime=2153.333 memavail=3584428 print_time=1956.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83840.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74569 bytes_read=329078 bytes_retransmit=9 bytes_invalid=0 send_seq=4760 receive_seq=4760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.07 cputime=2153.363 memavail=3584472 print_time=1957.046 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83841.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74605 bytes_read=329247 bytes_retransmit=9 bytes_invalid=0 send_seq=4762 receive_seq=4762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999104  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.07 cputime=2153.391 memavail=3584372 print_time=1958.048 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83842.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74664 bytes_read=329439 bytes_retransmit=9 bytes_invalid=0 send_seq=4766 receive_seq=4766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.07 cputime=2153.421 memavail=3584396 print_time=1959.049 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83843.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74708 bytes_read=329630 bytes_retransmit=9 bytes_invalid=0 send_seq=4769 receive_seq=4769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.07 cputime=2153.449 memavail=3584348 print_time=1960.050 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83844.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74752 bytes_read=329806 bytes_retransmit=9 bytes_invalid=0 send_seq=4772 receive_seq=4772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.07 cputime=2153.478 memavail=3584408 print_time=1961.050 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83845.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74839 bytes_read=329987 bytes_retransmit=9 bytes_invalid=0 send_seq=4776 receive_seq=4776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.07 cputime=2153.508 memavail=3584444 print_time=1962.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83846.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74889 bytes_read=330163 bytes_retransmit=9 bytes_invalid=0 send_seq=4779 receive_seq=4779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.07 cputime=2153.537 memavail=3584496 print_time=1963.052 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83847.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=74933 bytes_read=330339 bytes_retransmit=9 bytes_invalid=0 send_seq=4782 receive_seq=4782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.07 cputime=2153.567 memavail=3584628 print_time=1964.053 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83848.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=74977 bytes_read=330530 bytes_retransmit=9 bytes_invalid=0 send_seq=4785 receive_seq=4785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999099  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.07 cputime=2153.596 memavail=3584600 print_time=1965.054 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83849.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=75040 bytes_read=330701 bytes_retransmit=9 bytes_invalid=0 send_seq=4788 receive_seq=4787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.06 cputime=2153.625 memavail=3584632 print_time=1966.056 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83850.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=75060 bytes_read=330877 bytes_retransmit=9 bytes_invalid=0 send_seq=4790 receive_seq=4790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.06 cputime=2153.654 memavail=3584644 print_time=1967.057 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83851.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=75104 bytes_read=331053 bytes_retransmit=9 bytes_invalid=0 send_seq=4793 receive_seq=4793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.06 cputime=2153.682 memavail=3584432 print_time=1968.058 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83852.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=75148 bytes_read=331229 bytes_retransmit=9 bytes_invalid=0 send_seq=4796 receive_seq=4796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.06 cputime=2153.711 memavail=3584436 print_time=1969.060 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 83853.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75192 bytes_read=331420 bytes_retransmit=9 bytes_invalid=0 send_seq=4799 receive_seq=4799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.06 cputime=2153.740 memavail=3584444 print_time=1970.061 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83854.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75230 bytes_read=331596 bytes_retransmit=9 bytes_invalid=0 send_seq=4802 receive_seq=4802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.06 cputime=2153.769 memavail=3584448 print_time=1971.064 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83855.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75274 bytes_read=331772 bytes_retransmit=9 bytes_invalid=0 send_seq=4805 receive_seq=4805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999095  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.06 cputime=2153.798 memavail=3584512 print_time=1972.065 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83856.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75442 bytes_read=331953 bytes_retransmit=9 bytes_invalid=0 send_seq=4810 receive_seq=4809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=179999095  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.06 cputime=2153.828 memavail=3584692 print_time=1973.065 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83857.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75488 bytes_read=332134 bytes_retransmit=9 bytes_invalid=0 send_seq=4813 receive_seq=4813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.06 cputime=2153.857 memavail=3584504 print_time=1974.067 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83858.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=75526 bytes_read=332340 bytes_retransmit=9 bytes_invalid=0 send_seq=4816 receive_seq=4816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.06 cputime=2153.887 memavail=3584528 print_time=1975.068 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83859.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=75576 bytes_read=332501 bytes_retransmit=9 bytes_invalid=0 send_seq=4819 receive_seq=4819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.05 cputime=2153.916 memavail=3584536 print_time=1976.070 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83860.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=75620 bytes_read=332677 bytes_retransmit=9 bytes_invalid=0 send_seq=4822 receive_seq=4822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.05 cputime=2153.944 memavail=3584476 print_time=1977.072 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83861.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=75683 bytes_read=332863 bytes_retransmit=9 bytes_invalid=0 send_seq=4825 receive_seq=4824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.05 cputime=2153.972 memavail=3584656 print_time=1978.073 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83862.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=75703 bytes_read=333024 bytes_retransmit=9 bytes_invalid=0 send_seq=4827 receive_seq=4827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.05 cputime=2153.999 memavail=3584784 print_time=1979.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83863.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75747 bytes_read=333210 bytes_retransmit=9 bytes_invalid=0 send_seq=4830 receive_seq=4830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.05 cputime=2154.028 memavail=3584696 print_time=1980.077 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83864.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75791 bytes_read=333390 bytes_retransmit=9 bytes_invalid=0 send_seq=4833 receive_seq=4833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999091  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.05 cputime=2154.057 memavail=3584700 print_time=1981.078 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83865.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75835 bytes_read=333551 bytes_retransmit=9 bytes_invalid=0 send_seq=4836 receive_seq=4836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999089  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.05 cputime=2154.086 memavail=3584712 print_time=1982.080 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83866.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75879 bytes_read=333727 bytes_retransmit=9 bytes_invalid=0 send_seq=4839 receive_seq=4839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999088  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.05 cputime=2154.114 memavail=3584748 print_time=1983.081 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83867.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75917 bytes_read=333918 bytes_retransmit=9 bytes_invalid=0 send_seq=4842 receive_seq=4842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999087  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.05 cputime=2154.144 memavail=3584756 print_time=1984.083 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83868.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=75961 bytes_read=334094 bytes_retransmit=9 bytes_invalid=0 send_seq=4845 receive_seq=4845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999087  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.05 cputime=2154.172 memavail=3584636 print_time=1985.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83869.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=76059 bytes_read=334280 bytes_retransmit=9 bytes_invalid=0 send_seq=4850 receive_seq=4850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999086  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.04 cputime=2154.202 memavail=3584516 print_time=1986.087 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83870.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=76103 bytes_read=334471 bytes_retransmit=9 bytes_invalid=0 send_seq=4853 receive_seq=4853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999086  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.04 cputime=2154.232 memavail=3584396 print_time=1987.087 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83871.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=76147 bytes_read=334632 bytes_retransmit=9 bytes_invalid=0 send_seq=4856 receive_seq=4856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999087  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.04 cputime=2154.262 memavail=3584456 print_time=1988.089 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83872.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=76191 bytes_read=334823 bytes_retransmit=9 bytes_invalid=0 send_seq=4859 receive_seq=4859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999085  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.04 cputime=2154.290 memavail=3584460 print_time=1989.090 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83873.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=76235 bytes_read=335014 bytes_retransmit=9 bytes_invalid=0 send_seq=4862 receive_seq=4862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999085  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.04 cputime=2154.319 memavail=3584372 print_time=1990.091 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83874.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=76279 bytes_read=335175 bytes_retransmit=9 bytes_invalid=0 send_seq=4865 receive_seq=4865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999089  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.04 cputime=2154.349 memavail=3584376 print_time=1991.091 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83875.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=76329 bytes_read=335366 bytes_retransmit=9 bytes_invalid=0 send_seq=4868 receive_seq=4868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999090  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.04 cputime=2154.379 memavail=3584384 print_time=1992.092 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83876.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=76367 bytes_read=335542 bytes_retransmit=9 bytes_invalid=0 send_seq=4871 receive_seq=4871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.04 cputime=2154.409 memavail=3584392 print_time=1993.092 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83877.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=76411 bytes_read=335703 bytes_retransmit=9 bytes_invalid=0 send_seq=4874 receive_seq=4874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999099  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.04 cputime=2154.439 memavail=3584516 print_time=1994.094 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83878.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=76461 bytes_read=335909 bytes_retransmit=9 bytes_invalid=0 send_seq=4877 receive_seq=4877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.04 cputime=2154.468 memavail=3584460 print_time=1995.095 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83879.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=76505 bytes_read=336085 bytes_retransmit=9 bytes_invalid=0 send_seq=4880 receive_seq=4880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.12 cputime=2154.499 memavail=3584464 print_time=1996.098 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83880.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=76549 bytes_read=336246 bytes_retransmit=9 bytes_invalid=0 send_seq=4883 receive_seq=4883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.12 cputime=2154.529 memavail=3584472 print_time=1997.099 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83881.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=76593 bytes_read=336437 bytes_retransmit=9 bytes_invalid=0 send_seq=4886 receive_seq=4886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999095  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.12 cputime=2154.558 memavail=3584484 print_time=1998.101 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83882.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=76637 bytes_read=336613 bytes_retransmit=9 bytes_invalid=0 send_seq=4889 receive_seq=4889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.12 cputime=2154.588 memavail=3584488 print_time=1999.103 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83883.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=76681 bytes_read=336789 bytes_retransmit=9 bytes_invalid=0 send_seq=4892 receive_seq=4892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.12 cputime=2154.618 memavail=3584500 print_time=2000.106 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83884.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=76779 bytes_read=336990 bytes_retransmit=9 bytes_invalid=0 send_seq=4897 receive_seq=4897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.11 cputime=2154.649 memavail=3584384 print_time=2001.110 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 83885.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=76823 bytes_read=337166 bytes_retransmit=9 bytes_invalid=0 send_seq=4900 receive_seq=4900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.11 cputime=2154.675 memavail=3584396 print_time=2002.112 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83886.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=76867 bytes_read=337327 bytes_retransmit=9 bytes_invalid=0 send_seq=4903 receive_seq=4903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.11 cputime=2154.703 memavail=3584516 print_time=2003.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83887.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=77017 bytes_read=337520 bytes_retransmit=9 bytes_invalid=0 send_seq=4909 receive_seq=4908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.11 cputime=2154.736 memavail=3584556 print_time=2004.114 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 83888.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=77110 bytes_read=337708 bytes_retransmit=9 bytes_invalid=0 send_seq=4913 receive_seq=4912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999095  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.11 cputime=2154.765 memavail=3584588 print_time=2005.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83889.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=77151 bytes_read=337874 bytes_retransmit=9 bytes_invalid=0 send_seq=4916 receive_seq=4916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.10 cputime=2154.794 memavail=3584600 print_time=2006.116 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83890.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=77195 bytes_read=338065 bytes_retransmit=9 bytes_invalid=0 send_seq=4919 receive_seq=4919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.10 cputime=2154.822 memavail=3584608 print_time=2007.117 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83891.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=77225 bytes_read=338236 bytes_retransmit=9 bytes_invalid=0 send_seq=4921 receive_seq=4921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999098  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.10 cputime=2154.850 memavail=3584624 print_time=2008.119 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83892.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=77264 bytes_read=338392 bytes_retransmit=9 bytes_invalid=0 send_seq=4923 receive_seq=4923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999099  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.10 cputime=2154.879 memavail=3584628 print_time=2009.120 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83893.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=77366 bytes_read=338608 bytes_retransmit=9 bytes_invalid=0 send_seq=4928 receive_seq=4928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.10 cputime=2154.912 memavail=3584628 print_time=2010.122 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83894.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=77410 bytes_read=338784 bytes_retransmit=9 bytes_invalid=0 send_seq=4931 receive_seq=4931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.09 cputime=2154.941 memavail=3584640 print_time=2011.123 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83895.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=77454 bytes_read=338945 bytes_retransmit=9 bytes_invalid=0 send_seq=4934 receive_seq=4934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.09 cputime=2154.971 memavail=3584640 print_time=2012.125 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83896.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=77498 bytes_read=339131 bytes_retransmit=9 bytes_invalid=0 send_seq=4937 receive_seq=4936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=19 freq=179999098  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.09 cputime=2155.000 memavail=3584640 print_time=2013.127 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83897.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=77542 bytes_read=339312 bytes_retransmit=9 bytes_invalid=0 send_seq=4940 receive_seq=4940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.09 cputime=2155.028 memavail=3584772 print_time=2014.128 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83898.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=77586 bytes_read=339503 bytes_retransmit=9 bytes_invalid=0 send_seq=4943 receive_seq=4943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.09 cputime=2155.058 memavail=3584772 print_time=2015.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83899.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=77630 bytes_read=339679 bytes_retransmit=9 bytes_invalid=0 send_seq=4946 receive_seq=4946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.24 cputime=2155.087 memavail=3584772 print_time=2016.132 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83900.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=77699 bytes_read=339855 bytes_retransmit=9 bytes_invalid=0 send_seq=4950 receive_seq=4949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.24 cputime=2155.117 memavail=3584808 print_time=2017.134 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83901.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=77713 bytes_read=340042 bytes_retransmit=9 bytes_invalid=0 send_seq=4952 receive_seq=4952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999095  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.24 cputime=2155.141 memavail=3585072 print_time=2018.135 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 83902.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=77763 bytes_read=340218 bytes_retransmit=9 bytes_invalid=0 send_seq=4955 receive_seq=4955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999095  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.24 cputime=2155.167 memavail=3585088 print_time=2019.137 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83903.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=77807 bytes_read=340409 bytes_retransmit=9 bytes_invalid=0 send_seq=4958 receive_seq=4958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999095  heater_bed: target=75 temp=75.0 pwm=0.000 sysload=0.24 cputime=2155.195 memavail=3585204 print_time=2020.139 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Autotune: raw=5.752028/0.700000 Ku=0.309897 Tu=234.900000  Kp=47.414215 Ki=0.403697 Kd=1392.199898
Stats 83904.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=77995 bytes_read=340605 bytes_retransmit=9 bytes_invalid=0 send_seq=4965 receive_seq=4965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999095  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.22 cputime=2155.226 memavail=3585180 print_time=2021.141 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83905.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=78030 bytes_read=340781 bytes_retransmit=9 bytes_invalid=0 send_seq=4968 receive_seq=4968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999097  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.22 cputime=2155.256 memavail=3585248 print_time=2022.142 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83906.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=78080 bytes_read=340952 bytes_retransmit=9 bytes_invalid=0 send_seq=4971 receive_seq=4970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=19 freq=179999097  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.22 cputime=2155.285 memavail=3585256 print_time=2023.144 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83907.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=78124 bytes_read=341133 bytes_retransmit=9 bytes_invalid=0 send_seq=4974 receive_seq=4974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.22 cputime=2155.313 memavail=3585264 print_time=2024.145 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83908.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=78184 bytes_read=341329 bytes_retransmit=9 bytes_invalid=0 send_seq=4978 receive_seq=4978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.22 cputime=2155.342 memavail=3585276 print_time=2025.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83909.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=78228 bytes_read=341505 bytes_retransmit=9 bytes_invalid=0 send_seq=4981 receive_seq=4981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.29 cputime=2155.370 memavail=3585360 print_time=2026.148 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83910.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=78272 bytes_read=341676 bytes_retransmit=9 bytes_invalid=0 send_seq=4984 receive_seq=4983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=19 freq=179999098  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.29 cputime=2155.399 memavail=3585376 print_time=2027.149 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83911.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=78316 bytes_read=341847 bytes_retransmit=9 bytes_invalid=0 send_seq=4987 receive_seq=4987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.29 cputime=2155.427 memavail=3586420 print_time=2028.150 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83912.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=78371 bytes_read=342016 bytes_retransmit=9 bytes_invalid=0 send_seq=4990 receive_seq=4990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.29 cputime=2155.456 memavail=3586384 print_time=2029.152 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83913.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=78415 bytes_read=342207 bytes_retransmit=9 bytes_invalid=0 send_seq=4993 receive_seq=4993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.29 cputime=2155.484 memavail=3586544 print_time=2030.154 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83914.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=78459 bytes_read=342383 bytes_retransmit=9 bytes_invalid=0 send_seq=4996 receive_seq=4996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.26 cputime=2155.513 memavail=3586656 print_time=2031.156 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83915.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=78497 bytes_read=342559 bytes_retransmit=9 bytes_invalid=0 send_seq=4999 receive_seq=4999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.26 cputime=2155.543 memavail=3586628 print_time=2032.157 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83916.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=78558 bytes_read=342735 bytes_retransmit=9 bytes_invalid=0 send_seq=5002 receive_seq=5002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.26 cputime=2155.572 memavail=3586620 print_time=2033.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83917.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=78602 bytes_read=342911 bytes_retransmit=9 bytes_invalid=0 send_seq=5005 receive_seq=5005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.26 cputime=2155.601 memavail=3586656 print_time=2034.159 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83918.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=78646 bytes_read=343102 bytes_retransmit=9 bytes_invalid=0 send_seq=5008 receive_seq=5008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.26 cputime=2155.630 memavail=3586620 print_time=2035.162 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83919.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=78690 bytes_read=343278 bytes_retransmit=9 bytes_invalid=0 send_seq=5011 receive_seq=5011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.24 cputime=2155.659 memavail=3586788 print_time=2036.164 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83920.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=78734 bytes_read=343454 bytes_retransmit=9 bytes_invalid=0 send_seq=5014 receive_seq=5014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.24 cputime=2155.688 memavail=3586768 print_time=2037.166 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83921.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=78794 bytes_read=343635 bytes_retransmit=9 bytes_invalid=0 send_seq=5018 receive_seq=5018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.24 cputime=2155.718 memavail=3587060 print_time=2038.167 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83922.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=78871 bytes_read=343811 bytes_retransmit=9 bytes_invalid=0 send_seq=5021 receive_seq=5021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999103  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.24 cputime=2155.748 memavail=3587064 print_time=2039.169 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83923.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=78921 bytes_read=344017 bytes_retransmit=9 bytes_invalid=0 send_seq=5024 receive_seq=5024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=75.7 pwm=0.700 sysload=0.24 cputime=2155.778 memavail=3587068 print_time=2040.171 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83924.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=78965 bytes_read=344178 bytes_retransmit=9 bytes_invalid=0 send_seq=5027 receive_seq=5027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=75.7 pwm=0.700 sysload=0.22 cputime=2155.807 memavail=3587076 print_time=2041.171 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 83925.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=79025 bytes_read=344359 bytes_retransmit=9 bytes_invalid=0 send_seq=5031 receive_seq=5031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=75.8 pwm=0.700 sysload=0.22 cputime=2155.836 memavail=3587056 print_time=2042.173 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83927.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=79063 bytes_read=344550 bytes_retransmit=9 bytes_invalid=0 send_seq=5034 receive_seq=5034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=75.9 pwm=0.700 sysload=0.22 cputime=2155.865 memavail=3587092 print_time=2043.175 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83928.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=79107 bytes_read=344711 bytes_retransmit=9 bytes_invalid=0 send_seq=5037 receive_seq=5037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=76.0 pwm=0.700 sysload=0.22 cputime=2155.894 memavail=3587096 print_time=2044.177 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83929.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=79151 bytes_read=344902 bytes_retransmit=9 bytes_invalid=0 send_seq=5040 receive_seq=5040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=76.0 pwm=0.700 sysload=0.22 cputime=2155.925 memavail=3587104 print_time=2045.178 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83930.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=79217 bytes_read=345098 bytes_retransmit=9 bytes_invalid=0 send_seq=5044 receive_seq=5044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=76.1 pwm=0.700 sysload=0.20 cputime=2155.956 memavail=3587112 print_time=2046.181 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83931.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=79261 bytes_read=345259 bytes_retransmit=9 bytes_invalid=0 send_seq=5047 receive_seq=5047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999103  heater_bed: target=80 temp=76.2 pwm=0.700 sysload=0.20 cputime=2155.987 memavail=3587120 print_time=2047.182 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83932.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=79305 bytes_read=345435 bytes_retransmit=9 bytes_invalid=0 send_seq=5050 receive_seq=5050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=76.3 pwm=0.700 sysload=0.20 cputime=2156.017 memavail=3587880 print_time=2048.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83933.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=79349 bytes_read=345626 bytes_retransmit=9 bytes_invalid=0 send_seq=5053 receive_seq=5053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=76.3 pwm=0.700 sysload=0.20 cputime=2156.046 memavail=3587964 print_time=2049.186 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83934.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=79403 bytes_read=345807 bytes_retransmit=9 bytes_invalid=0 send_seq=5057 receive_seq=5057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=76.4 pwm=0.700 sysload=0.20 cputime=2156.076 memavail=3587928 print_time=2050.188 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83935.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=79453 bytes_read=345996 bytes_retransmit=9 bytes_invalid=0 send_seq=5060 receive_seq=5060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=76.5 pwm=0.700 sysload=0.19 cputime=2156.105 memavail=3588092 print_time=2051.189 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83936.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=79555 bytes_read=346166 bytes_retransmit=9 bytes_invalid=0 send_seq=5064 receive_seq=5064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999112  heater_bed: target=80 temp=76.6 pwm=0.700 sysload=0.19 cputime=2156.136 memavail=3588024 print_time=2052.190 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83937.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=79590 bytes_read=346323 bytes_retransmit=9 bytes_invalid=0 send_seq=5067 receive_seq=5067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999110  heater_bed: target=80 temp=76.7 pwm=0.700 sysload=0.19 cputime=2156.165 memavail=3588108 print_time=2053.193 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83938.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=79650 bytes_read=346519 bytes_retransmit=9 bytes_invalid=0 send_seq=5071 receive_seq=5071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.19 cputime=2156.195 memavail=3588220 print_time=2054.193 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83939.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=79694 bytes_read=346710 bytes_retransmit=9 bytes_invalid=0 send_seq=5074 receive_seq=5074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.19 cputime=2156.224 memavail=3588252 print_time=2055.195 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83940.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=79738 bytes_read=346871 bytes_retransmit=9 bytes_invalid=0 send_seq=5077 receive_seq=5077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999108  heater_bed: target=80 temp=76.9 pwm=0.700 sysload=0.17 cputime=2156.252 memavail=3588196 print_time=2056.197 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 83941.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=79782 bytes_read=347062 bytes_retransmit=9 bytes_invalid=0 send_seq=5080 receive_seq=5080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=77.0 pwm=0.700 sysload=0.17 cputime=2156.281 memavail=3588136 print_time=2057.199 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83942.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=79826 bytes_read=347238 bytes_retransmit=9 bytes_invalid=0 send_seq=5083 receive_seq=5083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=77.1 pwm=0.700 sysload=0.17 cputime=2156.309 memavail=3588812 print_time=2058.200 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83943.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=79886 bytes_read=347404 bytes_retransmit=9 bytes_invalid=0 send_seq=5087 receive_seq=5087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=77.2 pwm=0.700 sysload=0.17 cputime=2156.338 memavail=3588872 print_time=2059.202 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83944.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=79930 bytes_read=347610 bytes_retransmit=9 bytes_invalid=0 send_seq=5090 receive_seq=5090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=77.3 pwm=0.700 sysload=0.17 cputime=2156.367 memavail=3588872 print_time=2060.203 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83945.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=80016 bytes_read=347796 bytes_retransmit=9 bytes_invalid=0 send_seq=5095 receive_seq=5095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=77.4 pwm=0.700 sysload=0.16 cputime=2156.398 memavail=3588912 print_time=2061.206 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83946.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=80060 bytes_read=347957 bytes_retransmit=9 bytes_invalid=0 send_seq=5098 receive_seq=5098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=77.5 pwm=0.700 sysload=0.16 cputime=2156.425 memavail=3588916 print_time=2062.207 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83947.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=80184 bytes_read=348153 bytes_retransmit=9 bytes_invalid=0 send_seq=5103 receive_seq=5102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=77.5 pwm=0.700 sysload=0.16 cputime=2156.457 memavail=3588936 print_time=2063.209 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83948.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=80219 bytes_read=348334 bytes_retransmit=9 bytes_invalid=0 send_seq=5106 receive_seq=5106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=77.6 pwm=0.700 sysload=0.16 cputime=2156.485 memavail=3588944 print_time=2064.211 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83949.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=80263 bytes_read=348510 bytes_retransmit=9 bytes_invalid=0 send_seq=5109 receive_seq=5109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=77.7 pwm=0.700 sysload=0.16 cputime=2156.514 memavail=3588952 print_time=2065.213 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83950.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=80307 bytes_read=348701 bytes_retransmit=9 bytes_invalid=0 send_seq=5112 receive_seq=5112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=77.8 pwm=0.700 sysload=0.14 cputime=2156.543 memavail=3588952 print_time=2066.214 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83951.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=80361 bytes_read=348882 bytes_retransmit=9 bytes_invalid=0 send_seq=5116 receive_seq=5116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=77.9 pwm=0.700 sysload=0.14 cputime=2156.575 memavail=3588960 print_time=2067.216 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 83952.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=80405 bytes_read=349043 bytes_retransmit=9 bytes_invalid=0 send_seq=5119 receive_seq=5119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=78.0 pwm=0.700 sysload=0.14 cputime=2156.604 memavail=3589472 print_time=2068.217 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83953.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=80573 bytes_read=349239 bytes_retransmit=9 bytes_invalid=0 send_seq=5124 receive_seq=5123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=179999096  heater_bed: target=80 temp=78.1 pwm=0.700 sysload=0.14 cputime=2156.635 memavail=3589476 print_time=2069.217 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83954.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=80622 bytes_read=349435 bytes_retransmit=9 bytes_invalid=0 send_seq=5127 receive_seq=5127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999096  heater_bed: target=80 temp=78.2 pwm=0.700 sysload=0.14 cputime=2156.665 memavail=3589488 print_time=2070.219 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83955.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=80679 bytes_read=349601 bytes_retransmit=9 bytes_invalid=0 send_seq=5131 receive_seq=5131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=78.3 pwm=0.700 sysload=0.13 cputime=2156.694 memavail=3589488 print_time=2071.220 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83956.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=80723 bytes_read=349792 bytes_retransmit=9 bytes_invalid=0 send_seq=5134 receive_seq=5134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999097  heater_bed: target=80 temp=78.4 pwm=0.700 sysload=0.13 cputime=2156.723 memavail=3589496 print_time=2072.223 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83957.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=80786 bytes_read=349963 bytes_retransmit=9 bytes_invalid=0 send_seq=5137 receive_seq=5136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=78.5 pwm=0.700 sysload=0.13 cputime=2156.752 memavail=3589508 print_time=2073.223 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83958.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=80806 bytes_read=350124 bytes_retransmit=9 bytes_invalid=0 send_seq=5139 receive_seq=5139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=78.5 pwm=0.700 sysload=0.13 cputime=2156.779 memavail=3589512 print_time=2074.225 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83959.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=80920 bytes_read=350354 bytes_retransmit=9 bytes_invalid=0 send_seq=5146 receive_seq=5145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=78.7 pwm=0.700 sysload=0.13 cputime=2156.813 memavail=3589520 print_time=2075.228 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83960.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=80964 bytes_read=350524 bytes_retransmit=9 bytes_invalid=0 send_seq=5149 receive_seq=5149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=78.8 pwm=0.700 sysload=0.12 cputime=2156.842 memavail=3589520 print_time=2076.229 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83961.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=81008 bytes_read=350697 bytes_retransmit=9 bytes_invalid=0 send_seq=5152 receive_seq=5152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=78.9 pwm=0.700 sysload=0.12 cputime=2156.872 memavail=3589532 print_time=2077.229 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83962.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=81052 bytes_read=350873 bytes_retransmit=9 bytes_invalid=0 send_seq=5155 receive_seq=5155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=79.0 pwm=0.700 sysload=0.12 cputime=2156.900 memavail=3588416 print_time=2078.230 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83963.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=81096 bytes_read=351049 bytes_retransmit=9 bytes_invalid=0 send_seq=5158 receive_seq=5158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=79.1 pwm=0.700 sysload=0.12 cputime=2156.931 memavail=3588420 print_time=2079.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83964.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=81156 bytes_read=351240 bytes_retransmit=9 bytes_invalid=0 send_seq=5162 receive_seq=5161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=3 stalled_bytes=16 freq=179999099  heater_bed: target=80 temp=79.2 pwm=0.700 sysload=0.12 cputime=2156.961 memavail=3588428 print_time=2080.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83965.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=81200 bytes_read=351421 bytes_retransmit=9 bytes_invalid=0 send_seq=5165 receive_seq=5165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=79.3 pwm=0.700 sysload=0.19 cputime=2156.990 memavail=3588432 print_time=2081.235 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83966.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=81244 bytes_read=351597 bytes_retransmit=9 bytes_invalid=0 send_seq=5168 receive_seq=5168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=79.4 pwm=0.700 sysload=0.19 cputime=2157.018 memavail=3588444 print_time=2082.235 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83967.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=81288 bytes_read=351768 bytes_retransmit=9 bytes_invalid=0 send_seq=5171 receive_seq=5170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=19 freq=179999100  heater_bed: target=80 temp=79.5 pwm=0.700 sysload=0.19 cputime=2157.048 memavail=3588452 print_time=2083.236 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83968.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=81412 bytes_read=351954 bytes_retransmit=9 bytes_invalid=0 send_seq=5176 receive_seq=5175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=79.6 pwm=0.700 sysload=0.19 cputime=2157.079 memavail=3588464 print_time=2084.238 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83969.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=81455 bytes_read=352150 bytes_retransmit=9 bytes_invalid=0 send_seq=5179 receive_seq=5179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=79.7 pwm=0.700 sysload=0.19 cputime=2157.108 memavail=3588468 print_time=2085.239 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83970.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=81499 bytes_read=352326 bytes_retransmit=9 bytes_invalid=0 send_seq=5182 receive_seq=5182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=79.9 pwm=0.700 sysload=0.26 cputime=2157.137 memavail=3588472 print_time=2086.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83971.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=81543 bytes_read=352502 bytes_retransmit=9 bytes_invalid=0 send_seq=5185 receive_seq=5185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=79.9 pwm=0.700 sysload=0.26 cputime=2157.167 memavail=3588476 print_time=2087.243 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Autotune: raw=-5.721697/0.700000 Ku=0.311540 Tu=234.600000  Kp=47.665565 Ki=0.406356 Kd=1397.792704
Stats 83972.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=81734 bytes_read=352693 bytes_retransmit=9 bytes_invalid=0 send_seq=5192 receive_seq=5191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.26 cputime=2157.199 memavail=3587744 print_time=2088.244 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 83973.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=81780 bytes_read=352874 bytes_retransmit=9 bytes_invalid=0 send_seq=5195 receive_seq=5195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.26 cputime=2157.228 memavail=3587744 print_time=2089.246 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83974.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=81818 bytes_read=353065 bytes_retransmit=9 bytes_invalid=0 send_seq=5198 receive_seq=5198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.26 cputime=2157.259 memavail=3587636 print_time=2090.248 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83975.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=81868 bytes_read=353241 bytes_retransmit=9 bytes_invalid=0 send_seq=5201 receive_seq=5201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.32 cputime=2157.288 memavail=3587640 print_time=2091.249 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83976.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=81912 bytes_read=353417 bytes_retransmit=9 bytes_invalid=0 send_seq=5204 receive_seq=5204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.32 cputime=2157.317 memavail=3587528 print_time=2092.250 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83977.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=82068 bytes_read=353603 bytes_retransmit=9 bytes_invalid=0 send_seq=5210 receive_seq=5209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.32 cputime=2157.350 memavail=3587312 print_time=2093.253 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83978.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=82103 bytes_read=353784 bytes_retransmit=9 bytes_invalid=0 send_seq=5213 receive_seq=5213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.32 cputime=2157.379 memavail=3587192 print_time=2094.254 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83979.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=82201 bytes_read=353985 bytes_retransmit=9 bytes_invalid=0 send_seq=5218 receive_seq=5218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.32 cputime=2157.410 memavail=3587096 print_time=2095.256 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83980.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=82269 bytes_read=354166 bytes_retransmit=9 bytes_invalid=0 send_seq=5222 receive_seq=5222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.29 cputime=2157.441 memavail=3586988 print_time=2096.259 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83981.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=82327 bytes_read=354347 bytes_retransmit=9 bytes_invalid=0 send_seq=5226 receive_seq=5226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.29 cputime=2157.472 memavail=3586996 print_time=2097.260 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83982.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=82460 bytes_read=354533 bytes_retransmit=9 bytes_invalid=0 send_seq=5231 receive_seq=5231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.29 cputime=2157.500 memavail=3586080 print_time=2098.260 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83983.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=82504 bytes_read=354705 bytes_retransmit=9 bytes_invalid=0 send_seq=5234 receive_seq=5234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.29 cputime=2157.529 memavail=3586208 print_time=2099.262 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83984.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=82562 bytes_read=354890 bytes_retransmit=9 bytes_invalid=0 send_seq=5238 receive_seq=5238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.29 cputime=2157.560 memavail=3586216 print_time=2100.263 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83985.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=82660 bytes_read=355075 bytes_retransmit=9 bytes_invalid=0 send_seq=5243 receive_seq=5243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999111  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.27 cputime=2157.591 memavail=3586152 print_time=2101.265 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 83986.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=82807 bytes_read=355281 bytes_retransmit=9 bytes_invalid=0 send_seq=5249 receive_seq=5249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.27 cputime=2157.623 memavail=3586064 print_time=2102.266 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83987.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=82891 bytes_read=355447 bytes_retransmit=9 bytes_invalid=0 send_seq=5253 receive_seq=5253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.27 cputime=2157.652 memavail=3586072 print_time=2103.267 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83988.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=82935 bytes_read=355623 bytes_retransmit=9 bytes_invalid=0 send_seq=5256 receive_seq=5256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.27 cputime=2157.683 memavail=3586084 print_time=2104.270 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83989.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=82979 bytes_read=355829 bytes_retransmit=9 bytes_invalid=0 send_seq=5259 receive_seq=5259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.27 cputime=2157.712 memavail=3586088 print_time=2105.271 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83990.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=83023 bytes_read=355990 bytes_retransmit=9 bytes_invalid=0 send_seq=5262 receive_seq=5262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.25 cputime=2157.741 memavail=3585968 print_time=2106.272 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83991.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=83081 bytes_read=356171 bytes_retransmit=9 bytes_invalid=0 send_seq=5266 receive_seq=5266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.25 cputime=2157.771 memavail=3585860 print_time=2107.273 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 83992.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=83165 bytes_read=356367 bytes_retransmit=9 bytes_invalid=0 send_seq=5270 receive_seq=5270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.25 cputime=2157.799 memavail=3585508 print_time=2108.275 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 83993.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=83209 bytes_read=356528 bytes_retransmit=9 bytes_invalid=0 send_seq=5273 receive_seq=5273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.25 cputime=2157.827 memavail=3585396 print_time=2109.277 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 83994.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=83267 bytes_read=356724 bytes_retransmit=9 bytes_invalid=0 send_seq=5277 receive_seq=5277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.25 cputime=2157.856 memavail=3585404 print_time=2110.278 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 83995.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=83400 bytes_read=356925 bytes_retransmit=9 bytes_invalid=0 send_seq=5282 receive_seq=5282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.23 cputime=2157.886 memavail=3585524 print_time=2111.279 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 83996.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=83444 bytes_read=357086 bytes_retransmit=9 bytes_invalid=0 send_seq=5285 receive_seq=5285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.23 cputime=2157.913 memavail=3585568 print_time=2112.281 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 83997.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=83551 bytes_read=357272 bytes_retransmit=9 bytes_invalid=0 send_seq=5290 receive_seq=5290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.23 cputime=2157.945 memavail=3585480 print_time=2113.283 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 83998.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=83635 bytes_read=357468 bytes_retransmit=9 bytes_invalid=0 send_seq=5294 receive_seq=5294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.23 cputime=2157.974 memavail=3585496 print_time=2114.284 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 83999.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=83679 bytes_read=357644 bytes_retransmit=9 bytes_invalid=0 send_seq=5297 receive_seq=5297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.23 cputime=2158.003 memavail=3585500 print_time=2115.285 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84000.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=83723 bytes_read=357820 bytes_retransmit=9 bytes_invalid=0 send_seq=5300 receive_seq=5300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.21 cputime=2158.032 memavail=3585508 print_time=2116.287 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 84001.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=83767 bytes_read=358011 bytes_retransmit=9 bytes_invalid=0 send_seq=5303 receive_seq=5303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.21 cputime=2158.061 memavail=3585516 print_time=2117.289 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84002.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=83819 bytes_read=358177 bytes_retransmit=9 bytes_invalid=0 send_seq=5307 receive_seq=5307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999111  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.21 cputime=2158.091 memavail=3585428 print_time=2118.290 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84003.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=83958 bytes_read=358378 bytes_retransmit=9 bytes_invalid=0 send_seq=5312 receive_seq=5312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.21 cputime=2158.122 memavail=3585432 print_time=2119.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84004.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=84074 bytes_read=358579 bytes_retransmit=9 bytes_invalid=0 send_seq=5317 receive_seq=5317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.21 cputime=2158.152 memavail=3585468 print_time=2120.292 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84005.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=84212 bytes_read=358750 bytes_retransmit=9 bytes_invalid=0 send_seq=5322 receive_seq=5322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.19 cputime=2158.182 memavail=3585472 print_time=2121.295 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84006.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=84305 bytes_read=358946 bytes_retransmit=9 bytes_invalid=0 send_seq=5326 receive_seq=5326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.19 cputime=2158.210 memavail=3585536 print_time=2122.296 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84007.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=84363 bytes_read=359121 bytes_retransmit=9 bytes_invalid=0 send_seq=5330 receive_seq=5330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.19 cputime=2158.239 memavail=3585424 print_time=2123.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84008.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=84496 bytes_read=359282 bytes_retransmit=9 bytes_invalid=0 send_seq=5335 receive_seq=5335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.19 cputime=2158.273 memavail=3585336 print_time=2124.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84009.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=84540 bytes_read=359487 bytes_retransmit=9 bytes_invalid=0 send_seq=5338 receive_seq=5338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.19 cputime=2158.304 memavail=3585344 print_time=2125.303 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84010.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=84584 bytes_read=359663 bytes_retransmit=9 bytes_invalid=0 send_seq=5341 receive_seq=5341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.18 cputime=2158.335 memavail=3585344 print_time=2126.304 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84011.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=84628 bytes_read=359824 bytes_retransmit=9 bytes_invalid=0 send_seq=5344 receive_seq=5344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.18 cputime=2158.363 memavail=3585380 print_time=2127.304 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84012.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=84672 bytes_read=360015 bytes_retransmit=9 bytes_invalid=0 send_seq=5347 receive_seq=5347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999099  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.18 cputime=2158.392 memavail=3585296 print_time=2128.305 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84013.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=84716 bytes_read=360191 bytes_retransmit=9 bytes_invalid=0 send_seq=5350 receive_seq=5350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.18 cputime=2158.421 memavail=3585300 print_time=2129.306 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84014.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84760 bytes_read=360367 bytes_retransmit=9 bytes_invalid=0 send_seq=5353 receive_seq=5353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.18 cputime=2158.449 memavail=3585212 print_time=2130.307 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84015.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84804 bytes_read=360558 bytes_retransmit=9 bytes_invalid=0 send_seq=5356 receive_seq=5356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999095  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.16 cputime=2158.477 memavail=3585220 print_time=2131.309 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84016.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84848 bytes_read=360734 bytes_retransmit=9 bytes_invalid=0 send_seq=5359 receive_seq=5359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.16 cputime=2158.506 memavail=3585224 print_time=2132.311 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84017.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84898 bytes_read=360895 bytes_retransmit=9 bytes_invalid=0 send_seq=5363 receive_seq=5362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.16 cputime=2158.534 memavail=3585232 print_time=2133.311 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84018.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84942 bytes_read=361102 bytes_retransmit=9 bytes_invalid=0 send_seq=5366 receive_seq=5366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.16 cputime=2158.563 memavail=3585236 print_time=2134.314 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84019.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84986 bytes_read=361293 bytes_retransmit=9 bytes_invalid=0 send_seq=5369 receive_seq=5369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999126  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.16 cputime=2158.592 memavail=3585248 print_time=2135.314 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84020.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=85030 bytes_read=361454 bytes_retransmit=9 bytes_invalid=0 send_seq=5372 receive_seq=5372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999124  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.15 cputime=2158.621 memavail=3585400 print_time=2136.315 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84021.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=85074 bytes_read=361645 bytes_retransmit=9 bytes_invalid=0 send_seq=5375 receive_seq=5375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.15 cputime=2158.651 memavail=3585408 print_time=2137.317 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84022.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=85118 bytes_read=361821 bytes_retransmit=9 bytes_invalid=0 send_seq=5378 receive_seq=5378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999129  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.15 cputime=2158.678 memavail=3585124 print_time=2138.318 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84023.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=85162 bytes_read=361982 bytes_retransmit=9 bytes_invalid=0 send_seq=5381 receive_seq=5381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999139  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.15 cputime=2158.705 memavail=3585124 print_time=2139.319 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84024.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85206 bytes_read=362188 bytes_retransmit=9 bytes_invalid=0 send_seq=5384 receive_seq=5384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999141  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.15 cputime=2158.735 memavail=3585068 print_time=2140.320 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 84025.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85250 bytes_read=362364 bytes_retransmit=9 bytes_invalid=0 send_seq=5387 receive_seq=5387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999137  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.14 cputime=2158.763 memavail=3585076 print_time=2141.322 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84026.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85294 bytes_read=362525 bytes_retransmit=9 bytes_invalid=0 send_seq=5390 receive_seq=5390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999133  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.14 cputime=2158.792 memavail=3585136 print_time=2142.324 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84027.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85338 bytes_read=362716 bytes_retransmit=9 bytes_invalid=0 send_seq=5393 receive_seq=5393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999131  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.14 cputime=2158.823 memavail=3585168 print_time=2143.327 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84028.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85382 bytes_read=362892 bytes_retransmit=9 bytes_invalid=0 send_seq=5396 receive_seq=5396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999128  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.14 cputime=2158.852 memavail=3585236 print_time=2144.328 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 84029.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85426 bytes_read=363068 bytes_retransmit=9 bytes_invalid=0 send_seq=5399 receive_seq=5399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999129  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.14 cputime=2158.880 memavail=3585360 print_time=2145.329 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84030.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85470 bytes_read=363259 bytes_retransmit=9 bytes_invalid=0 send_seq=5402 receive_seq=5402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999126  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.12 cputime=2158.911 memavail=3585432 print_time=2146.329 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84031.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85514 bytes_read=363426 bytes_retransmit=9 bytes_invalid=0 send_seq=5405 receive_seq=5405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999123  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.12 cputime=2158.940 memavail=3585340 print_time=2147.330 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84032.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85558 bytes_read=363594 bytes_retransmit=9 bytes_invalid=0 send_seq=5408 receive_seq=5408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.12 cputime=2158.967 memavail=3584760 print_time=2148.331 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84033.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85597 bytes_read=363765 bytes_retransmit=9 bytes_invalid=0 send_seq=5410 receive_seq=5410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.12 cputime=2158.994 memavail=3584768 print_time=2149.332 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84034.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=85641 bytes_read=363956 bytes_retransmit=9 bytes_invalid=0 send_seq=5413 receive_seq=5413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999118  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.12 cputime=2159.023 memavail=3584772 print_time=2150.334 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84035.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=85685 bytes_read=364132 bytes_retransmit=9 bytes_invalid=0 send_seq=5416 receive_seq=5416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.11 cputime=2159.052 memavail=3584784 print_time=2151.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84036.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=85729 bytes_read=364308 bytes_retransmit=9 bytes_invalid=0 send_seq=5419 receive_seq=5419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.11 cputime=2159.082 memavail=3584812 print_time=2152.337 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84037.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=85836 bytes_read=364489 bytes_retransmit=9 bytes_invalid=0 send_seq=5423 receive_seq=5423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.11 cputime=2159.113 memavail=3584824 print_time=2153.339 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84038.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=85880 bytes_read=364665 bytes_retransmit=9 bytes_invalid=0 send_seq=5426 receive_seq=5426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.11 cputime=2159.143 memavail=3584856 print_time=2154.342 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84039.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=85924 bytes_read=364856 bytes_retransmit=9 bytes_invalid=0 send_seq=5429 receive_seq=5429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.11 cputime=2159.172 memavail=3584784 print_time=2155.342 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84040.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=85968 bytes_read=365032 bytes_retransmit=9 bytes_invalid=0 send_seq=5432 receive_seq=5432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.10 cputime=2159.201 memavail=3584720 print_time=2156.343 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84041.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=86012 bytes_read=365208 bytes_retransmit=9 bytes_invalid=0 send_seq=5435 receive_seq=5435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.10 cputime=2159.231 memavail=3584628 print_time=2157.346 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84042.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=86056 bytes_read=365384 bytes_retransmit=9 bytes_invalid=0 send_seq=5438 receive_seq=5438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.10 cputime=2159.258 memavail=3584528 print_time=2158.346 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84043.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=86100 bytes_read=365560 bytes_retransmit=9 bytes_invalid=0 send_seq=5441 receive_seq=5441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.10 cputime=2159.287 memavail=3584528 print_time=2159.349 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84044.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=86144 bytes_read=365751 bytes_retransmit=9 bytes_invalid=0 send_seq=5444 receive_seq=5444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.10 cputime=2159.317 memavail=3584420 print_time=2160.350 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84045.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=86188 bytes_read=365927 bytes_retransmit=9 bytes_invalid=0 send_seq=5447 receive_seq=5447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.10 cputime=2159.348 memavail=3584300 print_time=2161.353 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 84046.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=86232 bytes_read=366103 bytes_retransmit=9 bytes_invalid=0 send_seq=5450 receive_seq=5450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999094  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.10 cputime=2159.380 memavail=3584180 print_time=2162.356 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84047.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=86284 bytes_read=366284 bytes_retransmit=9 bytes_invalid=0 send_seq=5454 receive_seq=5454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.10 cputime=2159.414 memavail=3584180 print_time=2163.360 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84048.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=86374 bytes_read=366465 bytes_retransmit=9 bytes_invalid=0 send_seq=5458 receive_seq=5458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.10 cputime=2159.445 memavail=3584072 print_time=2164.361 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84049.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=86418 bytes_read=366656 bytes_retransmit=9 bytes_invalid=0 send_seq=5461 receive_seq=5461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.10 cputime=2159.475 memavail=3583956 print_time=2165.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84050.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=86462 bytes_read=366832 bytes_retransmit=9 bytes_invalid=0 send_seq=5464 receive_seq=5464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999092  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.09 cputime=2159.504 memavail=3583856 print_time=2166.366 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84051.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=86506 bytes_read=367008 bytes_retransmit=9 bytes_invalid=0 send_seq=5467 receive_seq=5467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.09 cputime=2159.535 memavail=3583864 print_time=2167.365 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84052.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=86550 bytes_read=367184 bytes_retransmit=9 bytes_invalid=0 send_seq=5470 receive_seq=5470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.09 cputime=2159.562 memavail=3583796 print_time=2168.365 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84053.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=86594 bytes_read=367360 bytes_retransmit=9 bytes_invalid=0 send_seq=5473 receive_seq=5473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.09 cputime=2159.591 memavail=3583676 print_time=2169.367 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84054.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=86638 bytes_read=367566 bytes_retransmit=9 bytes_invalid=0 send_seq=5476 receive_seq=5476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.09 cputime=2159.622 memavail=3583560 print_time=2170.369 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84055.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=86682 bytes_read=367717 bytes_retransmit=9 bytes_invalid=0 send_seq=5479 receive_seq=5479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.08 cputime=2159.651 memavail=3583440 print_time=2171.370 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84056.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=86726 bytes_read=367886 bytes_retransmit=9 bytes_invalid=0 send_seq=5482 receive_seq=5482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.08 cputime=2159.679 memavail=3583448 print_time=2172.371 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84057.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=86770 bytes_read=368077 bytes_retransmit=9 bytes_invalid=0 send_seq=5485 receive_seq=5485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.08 cputime=2159.708 memavail=3583344 print_time=2173.371 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84058.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=86814 bytes_read=368238 bytes_retransmit=9 bytes_invalid=0 send_seq=5488 receive_seq=5488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.08 cputime=2159.737 memavail=3583240 print_time=2174.374 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84059.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=86858 bytes_read=368414 bytes_retransmit=9 bytes_invalid=0 send_seq=5491 receive_seq=5491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.08 cputime=2159.765 memavail=3583152 print_time=2175.375 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84060.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=86902 bytes_read=368620 bytes_retransmit=9 bytes_invalid=0 send_seq=5494 receive_seq=5494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.07 cputime=2159.795 memavail=3583180 print_time=2176.378 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84061.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=86946 bytes_read=368781 bytes_retransmit=9 bytes_invalid=0 send_seq=5497 receive_seq=5497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.07 cputime=2159.822 memavail=3583128 print_time=2177.378 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84062.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87028 bytes_read=368957 bytes_retransmit=9 bytes_invalid=0 send_seq=5500 receive_seq=5500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.07 cputime=2159.850 memavail=3582872 print_time=2178.379 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84063.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87072 bytes_read=369148 bytes_retransmit=9 bytes_invalid=0 send_seq=5503 receive_seq=5503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.07 cputime=2159.878 memavail=3582888 print_time=2179.380 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84064.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87130 bytes_read=369314 bytes_retransmit=9 bytes_invalid=0 send_seq=5507 receive_seq=5507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.07 cputime=2159.907 memavail=3582892 print_time=2180.382 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84065.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=87214 bytes_read=369510 bytes_retransmit=9 bytes_invalid=0 send_seq=5511 receive_seq=5511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.07 cputime=2159.935 memavail=3582676 print_time=2181.385 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84066.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=87258 bytes_read=369701 bytes_retransmit=9 bytes_invalid=0 send_seq=5514 receive_seq=5514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.07 cputime=2159.965 memavail=3582596 print_time=2182.387 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84067.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=87302 bytes_read=369862 bytes_retransmit=9 bytes_invalid=0 send_seq=5517 receive_seq=5517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999099  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.07 cputime=2159.992 memavail=3582720 print_time=2183.388 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84068.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=87346 bytes_read=370053 bytes_retransmit=9 bytes_invalid=0 send_seq=5520 receive_seq=5520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.07 cputime=2160.023 memavail=3582504 print_time=2184.390 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84069.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=87390 bytes_read=370229 bytes_retransmit=9 bytes_invalid=0 send_seq=5523 receive_seq=5523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.07 cputime=2160.051 memavail=3582656 print_time=2185.392 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84070.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=87434 bytes_read=370405 bytes_retransmit=9 bytes_invalid=0 send_seq=5526 receive_seq=5526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.06 cputime=2160.080 memavail=3582628 print_time=2186.394 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84071.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=87478 bytes_read=370596 bytes_retransmit=9 bytes_invalid=0 send_seq=5529 receive_seq=5529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.06 cputime=2160.110 memavail=3582416 print_time=2187.396 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84072.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=87522 bytes_read=370772 bytes_retransmit=9 bytes_invalid=0 send_seq=5532 receive_seq=5532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.06 cputime=2160.138 memavail=3582336 print_time=2188.397 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84073.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=87566 bytes_read=370933 bytes_retransmit=9 bytes_invalid=0 send_seq=5535 receive_seq=5535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.06 cputime=2160.167 memavail=3582216 print_time=2189.400 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84074.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=87610 bytes_read=371124 bytes_retransmit=9 bytes_invalid=0 send_seq=5538 receive_seq=5538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.06 cputime=2160.197 memavail=3582164 print_time=2190.401 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84075.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87660 bytes_read=371315 bytes_retransmit=9 bytes_invalid=0 send_seq=5542 receive_seq=5541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999096  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.06 cputime=2160.225 memavail=3582060 print_time=2191.402 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84076.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87704 bytes_read=371492 bytes_retransmit=9 bytes_invalid=0 send_seq=5545 receive_seq=5545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.06 cputime=2160.254 memavail=3581948 print_time=2192.404 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84077.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87748 bytes_read=371683 bytes_retransmit=9 bytes_invalid=0 send_seq=5548 receive_seq=5548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.06 cputime=2160.283 memavail=3581832 print_time=2193.404 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84078.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87792 bytes_read=371858 bytes_retransmit=9 bytes_invalid=0 send_seq=5551 receive_seq=5551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.06 cputime=2160.312 memavail=3581980 print_time=2194.406 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 84079.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87836 bytes_read=372008 bytes_retransmit=9 bytes_invalid=0 send_seq=5554 receive_seq=5554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999137  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.06 cputime=2160.340 memavail=3581984 print_time=2195.408 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84080.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87880 bytes_read=372210 bytes_retransmit=9 bytes_invalid=0 send_seq=5557 receive_seq=5557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999134  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.05 cputime=2160.370 memavail=3581988 print_time=2196.410 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84081.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87924 bytes_read=372386 bytes_retransmit=9 bytes_invalid=0 send_seq=5560 receive_seq=5560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999129  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.05 cputime=2160.398 memavail=3581996 print_time=2197.410 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84082.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87968 bytes_read=372547 bytes_retransmit=9 bytes_invalid=0 send_seq=5563 receive_seq=5563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999128  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.05 cputime=2160.424 memavail=3581776 print_time=2198.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84083.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=88012 bytes_read=372738 bytes_retransmit=9 bytes_invalid=0 send_seq=5566 receive_seq=5566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999125  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.05 cputime=2160.454 memavail=3581896 print_time=2199.414 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84084.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=88056 bytes_read=372914 bytes_retransmit=9 bytes_invalid=0 send_seq=5569 receive_seq=5569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999123  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.05 cputime=2160.482 memavail=3581900 print_time=2200.415 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84085.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88100 bytes_read=373090 bytes_retransmit=9 bytes_invalid=0 send_seq=5572 receive_seq=5572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999121  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.05 cputime=2160.512 memavail=3581916 print_time=2201.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84086.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88158 bytes_read=373286 bytes_retransmit=9 bytes_invalid=0 send_seq=5576 receive_seq=5576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.05 cputime=2160.543 memavail=3581920 print_time=2202.420 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84087.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88242 bytes_read=373467 bytes_retransmit=9 bytes_invalid=0 send_seq=5580 receive_seq=5580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.05 cputime=2160.573 memavail=3582052 print_time=2203.421 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84088.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88286 bytes_read=373628 bytes_retransmit=9 bytes_invalid=0 send_seq=5583 receive_seq=5583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.05 cputime=2160.602 memavail=3581964 print_time=2204.423 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 84089.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88330 bytes_read=373819 bytes_retransmit=9 bytes_invalid=0 send_seq=5586 receive_seq=5586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.05 cputime=2160.632 memavail=3582076 print_time=2205.426 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84090.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=88374 bytes_read=374010 bytes_retransmit=9 bytes_invalid=0 send_seq=5589 receive_seq=5589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999145  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.12 cputime=2160.660 memavail=3582128 print_time=2206.426 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84091.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=88418 bytes_read=374186 bytes_retransmit=9 bytes_invalid=0 send_seq=5592 receive_seq=5592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999142  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.12 cputime=2160.689 memavail=3582172 print_time=2207.428 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84092.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=88462 bytes_read=374362 bytes_retransmit=9 bytes_invalid=0 send_seq=5595 receive_seq=5595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999139  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.12 cputime=2160.716 memavail=3583244 print_time=2208.429 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84093.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=88506 bytes_read=374538 bytes_retransmit=9 bytes_invalid=0 send_seq=5598 receive_seq=5598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999135  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.12 cputime=2160.746 memavail=3583128 print_time=2209.432 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84094.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=88550 bytes_read=374714 bytes_retransmit=9 bytes_invalid=0 send_seq=5601 receive_seq=5601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999134  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.12 cputime=2160.775 memavail=3583044 print_time=2210.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84095.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88594 bytes_read=374905 bytes_retransmit=9 bytes_invalid=0 send_seq=5604 receive_seq=5604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999131  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.11 cputime=2160.804 memavail=3583052 print_time=2211.437 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84096.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88638 bytes_read=375081 bytes_retransmit=9 bytes_invalid=0 send_seq=5607 receive_seq=5607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999127  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.11 cputime=2160.833 memavail=3583060 print_time=2212.438 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84097.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88682 bytes_read=375257 bytes_retransmit=9 bytes_invalid=0 send_seq=5610 receive_seq=5610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999126  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.11 cputime=2160.861 memavail=3583068 print_time=2213.439 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84098.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88846 bytes_read=375443 bytes_retransmit=9 bytes_invalid=0 send_seq=5615 receive_seq=5615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999123  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.11 cputime=2160.892 memavail=3583060 print_time=2214.439 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84099.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=88890 bytes_read=375619 bytes_retransmit=9 bytes_invalid=0 send_seq=5618 receive_seq=5618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999120  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.11 cputime=2160.922 memavail=3583184 print_time=2215.440 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84100.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=88934 bytes_read=375810 bytes_retransmit=9 bytes_invalid=0 send_seq=5621 receive_seq=5621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999118  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.43 cputime=2160.951 memavail=3583160 print_time=2216.442 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84101.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=88978 bytes_read=375986 bytes_retransmit=9 bytes_invalid=0 send_seq=5624 receive_seq=5624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.43 cputime=2160.979 memavail=3583292 print_time=2217.442 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84102.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=89022 bytes_read=376159 bytes_retransmit=9 bytes_invalid=0 send_seq=5627 receive_seq=5627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.43 cputime=2161.006 memavail=3584220 print_time=2218.443 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84103.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=89066 bytes_read=376323 bytes_retransmit=9 bytes_invalid=0 send_seq=5630 receive_seq=5630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.43 cputime=2161.034 memavail=3584264 print_time=2219.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84104.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=89105 bytes_read=376492 bytes_retransmit=9 bytes_invalid=0 send_seq=5632 receive_seq=5632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.43 cputime=2161.063 memavail=3584268 print_time=2220.449 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84105.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89149 bytes_read=376683 bytes_retransmit=9 bytes_invalid=0 send_seq=5635 receive_seq=5635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.39 cputime=2161.091 memavail=3584268 print_time=2221.452 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84106.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89193 bytes_read=376859 bytes_retransmit=9 bytes_invalid=0 send_seq=5638 receive_seq=5638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.39 cputime=2161.120 memavail=3584252 print_time=2222.452 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84107.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89237 bytes_read=377035 bytes_retransmit=9 bytes_invalid=0 send_seq=5641 receive_seq=5641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.39 cputime=2161.149 memavail=3584284 print_time=2223.453 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 84108.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89281 bytes_read=377211 bytes_retransmit=9 bytes_invalid=0 send_seq=5644 receive_seq=5644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999099  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.39 cputime=2161.177 memavail=3584304 print_time=2224.454 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84109.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89325 bytes_read=377387 bytes_retransmit=9 bytes_invalid=0 send_seq=5647 receive_seq=5647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.39 cputime=2161.206 memavail=3584120 print_time=2225.457 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84110.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89383 bytes_read=377583 bytes_retransmit=9 bytes_invalid=0 send_seq=5651 receive_seq=5651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.52 cputime=2161.237 memavail=3583812 print_time=2226.457 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84111.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89467 bytes_read=377764 bytes_retransmit=9 bytes_invalid=0 send_seq=5655 receive_seq=5655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.52 cputime=2161.265 memavail=3584132 print_time=2227.458 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84112.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89511 bytes_read=377940 bytes_retransmit=9 bytes_invalid=0 send_seq=5658 receive_seq=5658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.52 cputime=2161.292 memavail=3583840 print_time=2228.460 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84113.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89555 bytes_read=378116 bytes_retransmit=9 bytes_invalid=0 send_seq=5661 receive_seq=5661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.52 cputime=2161.321 memavail=3583784 print_time=2229.463 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84114.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89599 bytes_read=378292 bytes_retransmit=9 bytes_invalid=0 send_seq=5664 receive_seq=5664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.52 cputime=2161.350 memavail=3583856 print_time=2230.465 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84115.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=89643 bytes_read=378483 bytes_retransmit=9 bytes_invalid=0 send_seq=5667 receive_seq=5667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.48 cputime=2161.378 memavail=3583812 print_time=2231.466 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84116.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=89687 bytes_read=378674 bytes_retransmit=9 bytes_invalid=0 send_seq=5670 receive_seq=5670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.48 cputime=2161.408 memavail=3583908 print_time=2232.470 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84117.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=89731 bytes_read=378835 bytes_retransmit=9 bytes_invalid=0 send_seq=5673 receive_seq=5673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.48 cputime=2161.436 memavail=3584028 print_time=2233.470 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84118.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=89775 bytes_read=379011 bytes_retransmit=9 bytes_invalid=0 send_seq=5676 receive_seq=5676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.48 cputime=2161.467 memavail=3583984 print_time=2234.472 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84119.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=89819 bytes_read=379202 bytes_retransmit=9 bytes_invalid=0 send_seq=5679 receive_seq=5679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.48 cputime=2161.495 memavail=3584180 print_time=2235.473 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84120.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89863 bytes_read=379378 bytes_retransmit=9 bytes_invalid=0 send_seq=5682 receive_seq=5682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.44 cputime=2161.524 memavail=3584188 print_time=2236.473 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84121.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89907 bytes_read=379554 bytes_retransmit=9 bytes_invalid=0 send_seq=5685 receive_seq=5685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.44 cputime=2161.552 memavail=3584312 print_time=2237.474 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84122.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89951 bytes_read=379745 bytes_retransmit=9 bytes_invalid=0 send_seq=5688 receive_seq=5688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.44 cputime=2161.581 memavail=3583480 print_time=2238.475 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84123.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=89995 bytes_read=379906 bytes_retransmit=9 bytes_invalid=0 send_seq=5691 receive_seq=5691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.44 cputime=2161.610 memavail=3583628 print_time=2239.478 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84124.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90053 bytes_read=380087 bytes_retransmit=9 bytes_invalid=0 send_seq=5695 receive_seq=5695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.44 cputime=2161.640 memavail=3583584 print_time=2240.478 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84125.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=90137 bytes_read=380298 bytes_retransmit=9 bytes_invalid=0 send_seq=5699 receive_seq=5699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.40 cputime=2161.672 memavail=3583588 print_time=2241.479 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84126.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=90181 bytes_read=380455 bytes_retransmit=9 bytes_invalid=0 send_seq=5702 receive_seq=5702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.40 cputime=2161.700 memavail=3583436 print_time=2242.481 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84127.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=90225 bytes_read=380620 bytes_retransmit=9 bytes_invalid=0 send_seq=5705 receive_seq=5705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.40 cputime=2161.728 memavail=3583444 print_time=2243.482 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84128.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=90269 bytes_read=380809 bytes_retransmit=9 bytes_invalid=0 send_seq=5708 receive_seq=5708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.40 cputime=2161.758 memavail=3583444 print_time=2244.484 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84129.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=90313 bytes_read=380970 bytes_retransmit=9 bytes_invalid=0 send_seq=5711 receive_seq=5711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.40 cputime=2161.788 memavail=3583444 print_time=2245.485 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84130.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90357 bytes_read=381161 bytes_retransmit=9 bytes_invalid=0 send_seq=5714 receive_seq=5714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.37 cputime=2161.817 memavail=3583464 print_time=2246.486 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84131.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90396 bytes_read=381347 bytes_retransmit=9 bytes_invalid=0 send_seq=5716 receive_seq=5716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.37 cputime=2161.846 memavail=3583496 print_time=2247.486 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84132.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90440 bytes_read=381508 bytes_retransmit=9 bytes_invalid=0 send_seq=5719 receive_seq=5719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999099  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.37 cputime=2161.873 memavail=3583628 print_time=2248.486 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84133.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90484 bytes_read=381699 bytes_retransmit=9 bytes_invalid=0 send_seq=5722 receive_seq=5722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.37 cputime=2161.904 memavail=3583676 print_time=2249.490 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84134.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90534 bytes_read=381891 bytes_retransmit=9 bytes_invalid=0 send_seq=5726 receive_seq=5726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.37 cputime=2161.934 memavail=3583684 print_time=2250.491 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84135.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90617 bytes_read=382067 bytes_retransmit=9 bytes_invalid=0 send_seq=5729 receive_seq=5729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.34 cputime=2161.965 memavail=3583632 print_time=2251.493 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84136.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90661 bytes_read=382258 bytes_retransmit=9 bytes_invalid=0 send_seq=5732 receive_seq=5732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999097  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.34 cputime=2161.993 memavail=3583752 print_time=2252.493 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84137.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90705 bytes_read=382434 bytes_retransmit=9 bytes_invalid=0 send_seq=5735 receive_seq=5735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.34 cputime=2162.022 memavail=3583676 print_time=2253.494 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84138.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90749 bytes_read=382595 bytes_retransmit=9 bytes_invalid=0 send_seq=5738 receive_seq=5738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.34 cputime=2162.049 memavail=3583808 print_time=2254.496 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84139.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90793 bytes_read=382786 bytes_retransmit=9 bytes_invalid=0 send_seq=5741 receive_seq=5741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.34 cputime=2162.079 memavail=3583776 print_time=2255.498 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84140.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=90837 bytes_read=382977 bytes_retransmit=9 bytes_invalid=0 send_seq=5744 receive_seq=5744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.31 cputime=2162.109 memavail=3583792 print_time=2256.500 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 84141.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=90881 bytes_read=383138 bytes_retransmit=9 bytes_invalid=0 send_seq=5747 receive_seq=5747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.31 cputime=2162.137 memavail=3583792 print_time=2257.500 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84142.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=90925 bytes_read=383329 bytes_retransmit=9 bytes_invalid=0 send_seq=5750 receive_seq=5750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.31 cputime=2162.165 memavail=3584048 print_time=2258.501 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84143.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=90969 bytes_read=383505 bytes_retransmit=9 bytes_invalid=0 send_seq=5753 receive_seq=5753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.31 cputime=2162.196 memavail=3584056 print_time=2259.504 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84144.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=91013 bytes_read=383666 bytes_retransmit=9 bytes_invalid=0 send_seq=5756 receive_seq=5756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.31 cputime=2162.226 memavail=3584068 print_time=2260.506 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84145.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91057 bytes_read=383872 bytes_retransmit=9 bytes_invalid=0 send_seq=5759 receive_seq=5759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=75.0 pwm=0.000 sysload=0.29 cputime=2162.256 memavail=3584156 print_time=2261.506 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84146.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91101 bytes_read=384048 bytes_retransmit=9 bytes_invalid=0 send_seq=5762 receive_seq=5762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=75.0 pwm=0.000 sysload=0.29 cputime=2162.285 memavail=3584280 print_time=2262.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Autotune: raw=5.811367/0.700000 Ku=0.306733 Tu=236.100000  Kp=46.930078 Ki=0.397544 Kd=1385.023923
Stats 84147.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91281 bytes_read=384224 bytes_retransmit=9 bytes_invalid=0 send_seq=5768 receive_seq=5768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.29 cputime=2162.317 memavail=3584096 print_time=2263.511 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84148.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91325 bytes_read=384415 bytes_retransmit=9 bytes_invalid=0 send_seq=5771 receive_seq=5771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.29 cputime=2162.346 memavail=3583976 print_time=2264.512 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84149.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91364 bytes_read=384586 bytes_retransmit=9 bytes_invalid=0 send_seq=5773 receive_seq=5773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.29 cputime=2162.375 memavail=3583976 print_time=2265.513 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84150.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=91408 bytes_read=384755 bytes_retransmit=9 bytes_invalid=0 send_seq=5776 receive_seq=5776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999098  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.27 cputime=2162.403 memavail=3583868 print_time=2266.515 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84151.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=91468 bytes_read=384941 bytes_retransmit=9 bytes_invalid=0 send_seq=5780 receive_seq=5780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999096  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.27 cputime=2162.433 memavail=3583728 print_time=2267.516 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84152.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=91512 bytes_read=385117 bytes_retransmit=9 bytes_invalid=0 send_seq=5783 receive_seq=5783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999096  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.27 cputime=2162.461 memavail=3583516 print_time=2268.516 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84153.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=91556 bytes_read=385278 bytes_retransmit=9 bytes_invalid=0 send_seq=5786 receive_seq=5786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999096  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.27 cputime=2162.490 memavail=3583528 print_time=2269.519 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84154.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=91600 bytes_read=385469 bytes_retransmit=9 bytes_invalid=0 send_seq=5789 receive_seq=5789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.27 cputime=2162.518 memavail=3583408 print_time=2270.521 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84155.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=91660 bytes_read=385665 bytes_retransmit=9 bytes_invalid=0 send_seq=5793 receive_seq=5793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.24 cputime=2162.546 memavail=3583364 print_time=2271.522 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84156.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=91704 bytes_read=385826 bytes_retransmit=9 bytes_invalid=0 send_seq=5796 receive_seq=5796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.24 cputime=2162.576 memavail=3583428 print_time=2272.523 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84157.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=91748 bytes_read=386017 bytes_retransmit=9 bytes_invalid=0 send_seq=5799 receive_seq=5799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999093  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.24 cputime=2162.604 memavail=3583356 print_time=2273.523 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84158.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=91792 bytes_read=386193 bytes_retransmit=9 bytes_invalid=0 send_seq=5802 receive_seq=5802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.24 cputime=2162.632 memavail=3583348 print_time=2274.524 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84159.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=91836 bytes_read=386354 bytes_retransmit=9 bytes_invalid=0 send_seq=5805 receive_seq=5805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.24 cputime=2162.660 memavail=3583160 print_time=2275.527 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84160.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=91896 bytes_read=386565 bytes_retransmit=9 bytes_invalid=0 send_seq=5809 receive_seq=5809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.22 cputime=2162.691 memavail=3583112 print_time=2276.528 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84161.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=91940 bytes_read=386741 bytes_retransmit=9 bytes_invalid=0 send_seq=5812 receive_seq=5812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.22 cputime=2162.720 memavail=3582996 print_time=2277.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84162.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=91984 bytes_read=386917 bytes_retransmit=9 bytes_invalid=0 send_seq=5815 receive_seq=5815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.22 cputime=2162.748 memavail=3582480 print_time=2278.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84163.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=92023 bytes_read=387088 bytes_retransmit=9 bytes_invalid=0 send_seq=5817 receive_seq=5817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.22 cputime=2162.775 memavail=3582588 print_time=2279.532 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84164.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=92083 bytes_read=387269 bytes_retransmit=9 bytes_invalid=0 send_seq=5821 receive_seq=5821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.22 cputime=2162.804 memavail=3582428 print_time=2280.534 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84165.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=92127 bytes_read=387460 bytes_retransmit=9 bytes_invalid=0 send_seq=5824 receive_seq=5824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.29 cputime=2162.832 memavail=3582456 print_time=2281.535 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84166.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=92179 bytes_read=387641 bytes_retransmit=9 bytes_invalid=0 send_seq=5828 receive_seq=5828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.29 cputime=2162.863 memavail=3582380 print_time=2282.537 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84167.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=92264 bytes_read=387822 bytes_retransmit=9 bytes_invalid=0 send_seq=5832 receive_seq=5832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.29 cputime=2162.892 memavail=3582196 print_time=2283.538 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84168.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=92319 bytes_read=387998 bytes_retransmit=9 bytes_invalid=0 send_seq=5835 receive_seq=5835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=80 temp=75.7 pwm=0.700 sysload=0.29 cputime=2162.920 memavail=3582232 print_time=2284.540 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84169.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=92363 bytes_read=388174 bytes_retransmit=9 bytes_invalid=0 send_seq=5838 receive_seq=5838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=75.8 pwm=0.700 sysload=0.29 cputime=2162.948 memavail=3582312 print_time=2285.541 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84170.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=92407 bytes_read=388365 bytes_retransmit=9 bytes_invalid=0 send_seq=5841 receive_seq=5841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=75.8 pwm=0.700 sysload=0.26 cputime=2162.977 memavail=3582340 print_time=2286.542 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 84171.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=92451 bytes_read=388541 bytes_retransmit=9 bytes_invalid=0 send_seq=5844 receive_seq=5844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=75.9 pwm=0.700 sysload=0.26 cputime=2163.005 memavail=3582272 print_time=2287.544 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84172.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=92511 bytes_read=388722 bytes_retransmit=9 bytes_invalid=0 send_seq=5848 receive_seq=5848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=76.0 pwm=0.700 sysload=0.26 cputime=2163.034 memavail=3582188 print_time=2288.545 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84173.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=92555 bytes_read=388898 bytes_retransmit=9 bytes_invalid=0 send_seq=5851 receive_seq=5851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=76.0 pwm=0.700 sysload=0.26 cputime=2163.061 memavail=3582384 print_time=2289.545 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84174.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=92599 bytes_read=389066 bytes_retransmit=9 bytes_invalid=0 send_seq=5854 receive_seq=5854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=76.1 pwm=0.700 sysload=0.26 cputime=2163.090 memavail=3582392 print_time=2290.546 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84175.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=92643 bytes_read=389249 bytes_retransmit=9 bytes_invalid=0 send_seq=5857 receive_seq=5857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=76.2 pwm=0.700 sysload=0.24 cputime=2163.119 memavail=3582396 print_time=2291.548 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84176.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=92703 bytes_read=389430 bytes_retransmit=9 bytes_invalid=0 send_seq=5861 receive_seq=5861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=76.3 pwm=0.700 sysload=0.24 cputime=2163.148 memavail=3582396 print_time=2292.549 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 84177.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=92747 bytes_read=389606 bytes_retransmit=9 bytes_invalid=0 send_seq=5864 receive_seq=5864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=76.4 pwm=0.700 sysload=0.24 cputime=2163.176 memavail=3582396 print_time=2293.550 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84178.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=92791 bytes_read=389782 bytes_retransmit=9 bytes_invalid=0 send_seq=5867 receive_seq=5867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=80 temp=76.5 pwm=0.700 sysload=0.24 cputime=2163.205 memavail=3582396 print_time=2294.552 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84179.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=92835 bytes_read=389958 bytes_retransmit=9 bytes_invalid=0 send_seq=5870 receive_seq=5870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=76.6 pwm=0.700 sysload=0.24 cputime=2163.235 memavail=3582560 print_time=2295.552 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84180.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=92928 bytes_read=390154 bytes_retransmit=9 bytes_invalid=0 send_seq=5874 receive_seq=5874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=76.7 pwm=0.700 sysload=0.22 cputime=2163.264 memavail=3582572 print_time=2296.554 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84181.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=92988 bytes_read=390335 bytes_retransmit=9 bytes_invalid=0 send_seq=5878 receive_seq=5878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.22 cputime=2163.292 memavail=3582484 print_time=2297.554 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84182.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=93032 bytes_read=390511 bytes_retransmit=9 bytes_invalid=0 send_seq=5881 receive_seq=5881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.22 cputime=2163.317 memavail=3581900 print_time=2298.554 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84183.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=93076 bytes_read=390687 bytes_retransmit=9 bytes_invalid=0 send_seq=5884 receive_seq=5884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=80 temp=76.9 pwm=0.700 sysload=0.22 cputime=2163.346 memavail=3582076 print_time=2299.557 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84184.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=93128 bytes_read=390868 bytes_retransmit=9 bytes_invalid=0 send_seq=5888 receive_seq=5888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=77.0 pwm=0.700 sysload=0.22 cputime=2163.376 memavail=3582020 print_time=2300.559 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84185.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=93232 bytes_read=391069 bytes_retransmit=9 bytes_invalid=0 send_seq=5893 receive_seq=5893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=77.1 pwm=0.700 sysload=0.20 cputime=2163.405 memavail=3582052 print_time=2301.560 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84186.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=93276 bytes_read=391245 bytes_retransmit=9 bytes_invalid=0 send_seq=5896 receive_seq=5896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=77.3 pwm=0.700 sysload=0.20 cputime=2163.433 memavail=3582000 print_time=2302.561 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84187.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=93320 bytes_read=391421 bytes_retransmit=9 bytes_invalid=0 send_seq=5899 receive_seq=5899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=77.3 pwm=0.700 sysload=0.20 cputime=2163.461 memavail=3582024 print_time=2303.562 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84188.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=93364 bytes_read=391597 bytes_retransmit=9 bytes_invalid=0 send_seq=5902 receive_seq=5902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=77.4 pwm=0.700 sysload=0.20 cputime=2163.490 memavail=3581976 print_time=2304.563 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84189.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=93424 bytes_read=391778 bytes_retransmit=9 bytes_invalid=0 send_seq=5906 receive_seq=5906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999099  heater_bed: target=80 temp=77.6 pwm=0.700 sysload=0.20 cputime=2163.519 memavail=3581856 print_time=2305.564 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84190.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=93517 bytes_read=391974 bytes_retransmit=9 bytes_invalid=0 send_seq=5910 receive_seq=5910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=77.6 pwm=0.700 sysload=0.19 cputime=2163.550 memavail=3581888 print_time=2306.567 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84191.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=93561 bytes_read=392150 bytes_retransmit=9 bytes_invalid=0 send_seq=5913 receive_seq=5913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=77.7 pwm=0.700 sysload=0.19 cputime=2163.578 memavail=3581896 print_time=2307.568 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84192.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=93611 bytes_read=392342 bytes_retransmit=9 bytes_invalid=0 send_seq=5917 receive_seq=5917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=80 temp=77.9 pwm=0.700 sysload=0.19 cputime=2163.607 memavail=3581024 print_time=2308.569 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84193.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=93671 bytes_read=392538 bytes_retransmit=9 bytes_invalid=0 send_seq=5921 receive_seq=5921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=80 temp=77.9 pwm=0.700 sysload=0.19 cputime=2163.638 memavail=3581036 print_time=2309.570 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84194.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=93715 bytes_read=392699 bytes_retransmit=9 bytes_invalid=0 send_seq=5924 receive_seq=5924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=78.0 pwm=0.700 sysload=0.19 cputime=2163.665 memavail=3581044 print_time=2310.571 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84195.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=93879 bytes_read=392900 bytes_retransmit=9 bytes_invalid=0 send_seq=5929 receive_seq=5929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=78.2 pwm=0.700 sysload=0.17 cputime=2163.696 memavail=3581048 print_time=2311.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84196.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=93923 bytes_read=393091 bytes_retransmit=9 bytes_invalid=0 send_seq=5932 receive_seq=5932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=78.3 pwm=0.700 sysload=0.17 cputime=2163.724 memavail=3581060 print_time=2312.574 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84197.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=93983 bytes_read=393257 bytes_retransmit=9 bytes_invalid=0 send_seq=5936 receive_seq=5936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=78.3 pwm=0.700 sysload=0.17 cputime=2163.751 memavail=3581068 print_time=2313.575 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84198.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=94027 bytes_read=393422 bytes_retransmit=9 bytes_invalid=0 send_seq=5939 receive_seq=5939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=78.5 pwm=0.700 sysload=0.17 cputime=2163.779 memavail=3581068 print_time=2314.575 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84199.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=94071 bytes_read=393608 bytes_retransmit=9 bytes_invalid=0 send_seq=5942 receive_seq=5942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=80 temp=78.6 pwm=0.700 sysload=0.17 cputime=2163.808 memavail=3581080 print_time=2315.577 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84200.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=94158 bytes_read=393789 bytes_retransmit=9 bytes_invalid=0 send_seq=5946 receive_seq=5946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=80 temp=78.6 pwm=0.700 sysload=0.16 cputime=2163.840 memavail=3581084 print_time=2316.579 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84201.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=94218 bytes_read=393970 bytes_retransmit=9 bytes_invalid=0 send_seq=5950 receive_seq=5950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=80 temp=78.7 pwm=0.700 sysload=0.16 cputime=2163.871 memavail=3581088 print_time=2317.583 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84202.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=94262 bytes_read=394161 bytes_retransmit=9 bytes_invalid=0 send_seq=5953 receive_seq=5953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=78.8 pwm=0.700 sysload=0.16 cputime=2163.897 memavail=3580848 print_time=2318.584 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84203.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=94306 bytes_read=394322 bytes_retransmit=9 bytes_invalid=0 send_seq=5956 receive_seq=5956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=80 temp=78.9 pwm=0.700 sysload=0.16 cputime=2163.924 memavail=3580760 print_time=2319.589 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84204.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=94350 bytes_read=394498 bytes_retransmit=9 bytes_invalid=0 send_seq=5959 receive_seq=5959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=79.1 pwm=0.700 sysload=0.16 cputime=2163.953 memavail=3580764 print_time=2320.587 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84205.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=94394 bytes_read=394704 bytes_retransmit=9 bytes_invalid=0 send_seq=5962 receive_seq=5962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=80 temp=79.1 pwm=0.700 sysload=0.15 cputime=2163.983 memavail=3580772 print_time=2321.589 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84206.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=94454 bytes_read=394870 bytes_retransmit=9 bytes_invalid=0 send_seq=5966 receive_seq=5966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=79.2 pwm=0.700 sysload=0.15 cputime=2164.010 memavail=3580748 print_time=2322.590 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 84207.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=94498 bytes_read=395061 bytes_retransmit=9 bytes_invalid=0 send_seq=5969 receive_seq=5969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=79.4 pwm=0.700 sysload=0.15 cputime=2164.037 memavail=3580648 print_time=2323.592 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84208.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=94542 bytes_read=395237 bytes_retransmit=9 bytes_invalid=0 send_seq=5972 receive_seq=5972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=79.4 pwm=0.700 sysload=0.15 cputime=2164.065 memavail=3580648 print_time=2324.594 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84209.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=94586 bytes_read=395398 bytes_retransmit=9 bytes_invalid=0 send_seq=5975 receive_seq=5975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=80 temp=79.5 pwm=0.700 sysload=0.15 cputime=2164.093 memavail=3580536 print_time=2325.596 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84210.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=94709 bytes_read=395614 bytes_retransmit=9 bytes_invalid=0 send_seq=5980 receive_seq=5980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=79.7 pwm=0.700 sysload=0.13 cputime=2164.123 memavail=3580388 print_time=2326.598 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84211.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=94753 bytes_read=395790 bytes_retransmit=9 bytes_invalid=0 send_seq=5983 receive_seq=5983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=80 temp=79.7 pwm=0.700 sysload=0.13 cputime=2164.150 memavail=3580268 print_time=2327.599 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84212.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=94797 bytes_read=395951 bytes_retransmit=9 bytes_invalid=0 send_seq=5986 receive_seq=5986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=79.8 pwm=0.700 sysload=0.13 cputime=2164.167 memavail=3579732 print_time=2328.599 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84213.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=94841 bytes_read=396142 bytes_retransmit=9 bytes_invalid=0 send_seq=5989 receive_seq=5989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=79.9 pwm=0.700 sysload=0.13 cputime=2164.192 memavail=3579772 print_time=2329.603 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Autotune: raw=-5.846755/0.700000 Ku=0.304876 Tu=242.100000  Kp=46.646029 Ki=0.385345 Kd=1411.625455
Stats 84214.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=95093 bytes_read=396338 bytes_retransmit=9 bytes_invalid=0 send_seq=5997 receive_seq=5996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.13 cputime=2164.227 memavail=3579708 print_time=2330.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84215.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=95161 bytes_read=396519 bytes_retransmit=9 bytes_invalid=0 send_seq=6000 receive_seq=6000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.12 cputime=2164.256 memavail=3579500 print_time=2331.607 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 84216.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=95244 bytes_read=396710 bytes_retransmit=9 bytes_invalid=0 send_seq=6003 receive_seq=6003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.12 cputime=2164.285 memavail=3579324 print_time=2332.609 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84217.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=95288 bytes_read=396886 bytes_retransmit=9 bytes_invalid=0 send_seq=6006 receive_seq=6006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.12 cputime=2164.313 memavail=3579724 print_time=2333.609 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84218.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=95376 bytes_read=397052 bytes_retransmit=9 bytes_invalid=0 send_seq=6010 receive_seq=6010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.12 cputime=2164.342 memavail=3579540 print_time=2334.612 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84219.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=95464 bytes_read=397248 bytes_retransmit=9 bytes_invalid=0 send_seq=6014 receive_seq=6014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.12 cputime=2164.372 memavail=3579540 print_time=2335.615 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84220.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=95508 bytes_read=397439 bytes_retransmit=9 bytes_invalid=0 send_seq=6017 receive_seq=6017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999117  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.11 cputime=2164.402 memavail=3579548 print_time=2336.616 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84221.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=95552 bytes_read=397599 bytes_retransmit=9 bytes_invalid=0 send_seq=6020 receive_seq=6020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.11 cputime=2164.430 memavail=3579308 print_time=2337.617 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84222.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=95610 bytes_read=397783 bytes_retransmit=9 bytes_invalid=0 send_seq=6024 receive_seq=6024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.11 cputime=2164.457 memavail=3579140 print_time=2338.618 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84223.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=95694 bytes_read=397960 bytes_retransmit=9 bytes_invalid=0 send_seq=6028 receive_seq=6028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.11 cputime=2164.486 memavail=3579040 print_time=2339.620 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84224.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=95738 bytes_read=398121 bytes_retransmit=9 bytes_invalid=0 send_seq=6031 receive_seq=6031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.11 cputime=2164.514 memavail=3579048 print_time=2340.621 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84225.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=95782 bytes_read=398327 bytes_retransmit=9 bytes_invalid=0 send_seq=6034 receive_seq=6034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.543 memavail=3578956 print_time=2341.622 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84226.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=95826 bytes_read=398503 bytes_retransmit=9 bytes_invalid=0 send_seq=6037 receive_seq=6037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.572 memavail=3578968 print_time=2342.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84227.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=95870 bytes_read=398664 bytes_retransmit=9 bytes_invalid=0 send_seq=6040 receive_seq=6040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.600 memavail=3578852 print_time=2343.624 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84228.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=95914 bytes_read=398855 bytes_retransmit=9 bytes_invalid=0 send_seq=6043 receive_seq=6043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.629 memavail=3578852 print_time=2344.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84229.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=95958 bytes_read=399031 bytes_retransmit=9 bytes_invalid=0 send_seq=6046 receive_seq=6046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.657 memavail=3578848 print_time=2345.626 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84230.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=96002 bytes_read=399222 bytes_retransmit=9 bytes_invalid=0 send_seq=6049 receive_seq=6049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.686 memavail=3578888 print_time=2346.628 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84231.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=96046 bytes_read=399398 bytes_retransmit=9 bytes_invalid=0 send_seq=6052 receive_seq=6052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.714 memavail=3578920 print_time=2347.628 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 84232.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=96085 bytes_read=399569 bytes_retransmit=9 bytes_invalid=0 send_seq=6054 receive_seq=6054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=80.7 pwm=0.000 sysload=0.10 cputime=2164.741 memavail=3579048 print_time=2348.628 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84233.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=96129 bytes_read=399745 bytes_retransmit=9 bytes_invalid=0 send_seq=6057 receive_seq=6057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.774 memavail=3579032 print_time=2349.632 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84234.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=96173 bytes_read=399921 bytes_retransmit=9 bytes_invalid=0 send_seq=6060 receive_seq=6060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.10 cputime=2164.804 memavail=3579192 print_time=2350.633 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84235.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96217 bytes_read=400112 bytes_retransmit=9 bytes_invalid=0 send_seq=6063 receive_seq=6063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2164.833 memavail=3578980 print_time=2351.633 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84236.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96261 bytes_read=400288 bytes_retransmit=9 bytes_invalid=0 send_seq=6066 receive_seq=6066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2164.863 memavail=3578948 print_time=2352.636 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84237.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96305 bytes_read=400464 bytes_retransmit=9 bytes_invalid=0 send_seq=6069 receive_seq=6069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2164.893 memavail=3579016 print_time=2353.638 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84238.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96349 bytes_read=400640 bytes_retransmit=9 bytes_invalid=0 send_seq=6072 receive_seq=6072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2164.922 memavail=3578980 print_time=2354.639 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84239.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96393 bytes_read=400816 bytes_retransmit=9 bytes_invalid=0 send_seq=6075 receive_seq=6075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.09 cputime=2164.951 memavail=3578936 print_time=2355.641 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84240.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96437 bytes_read=401007 bytes_retransmit=9 bytes_invalid=0 send_seq=6078 receive_seq=6078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=80.6 pwm=0.000 sysload=0.08 cputime=2164.981 memavail=3579096 print_time=2356.642 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84241.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96481 bytes_read=401183 bytes_retransmit=9 bytes_invalid=0 send_seq=6081 receive_seq=6081 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999103  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.08 cputime=2165.010 memavail=3579104 print_time=2357.643 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84242.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96525 bytes_read=401359 bytes_retransmit=9 bytes_invalid=0 send_seq=6084 receive_seq=6084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.08 cputime=2165.037 memavail=3579564 print_time=2358.643 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84243.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96569 bytes_read=401535 bytes_retransmit=9 bytes_invalid=0 send_seq=6087 receive_seq=6087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999100  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.08 cputime=2165.067 memavail=3579588 print_time=2359.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84244.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=96627 bytes_read=401716 bytes_retransmit=9 bytes_invalid=0 send_seq=6091 receive_seq=6091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.08 cputime=2165.098 memavail=3579500 print_time=2360.649 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84245.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=96760 bytes_read=401913 bytes_retransmit=9 bytes_invalid=0 send_seq=6096 receive_seq=6096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2165.127 memavail=3579532 print_time=2361.649 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84246.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=96804 bytes_read=402077 bytes_retransmit=9 bytes_invalid=0 send_seq=6099 receive_seq=6099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.5 pwm=0.000 sysload=0.07 cputime=2165.158 memavail=3579312 print_time=2362.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 84247.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=96848 bytes_read=402251 bytes_retransmit=9 bytes_invalid=0 send_seq=6102 receive_seq=6102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.07 cputime=2165.188 memavail=3579444 print_time=2363.653 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84248.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=96892 bytes_read=402427 bytes_retransmit=9 bytes_invalid=0 send_seq=6105 receive_seq=6105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.07 cputime=2165.217 memavail=3579292 print_time=2364.655 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84249.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=96936 bytes_read=402603 bytes_retransmit=9 bytes_invalid=0 send_seq=6108 receive_seq=6108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.07 cputime=2165.245 memavail=3579312 print_time=2365.656 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84250.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=96980 bytes_read=402794 bytes_retransmit=9 bytes_invalid=0 send_seq=6111 receive_seq=6111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999105  heater_bed: target=75 temp=80.4 pwm=0.000 sysload=0.07 cputime=2165.273 memavail=3579428 print_time=2366.657 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84251.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=97030 bytes_read=402986 bytes_retransmit=9 bytes_invalid=0 send_seq=6115 receive_seq=6115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.07 cputime=2165.303 memavail=3579400 print_time=2367.658 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84252.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=97074 bytes_read=403162 bytes_retransmit=9 bytes_invalid=0 send_seq=6118 receive_seq=6118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.07 cputime=2165.331 memavail=3579680 print_time=2368.659 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84253.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=97118 bytes_read=403338 bytes_retransmit=9 bytes_invalid=0 send_seq=6121 receive_seq=6121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=80.3 pwm=0.000 sysload=0.07 cputime=2165.360 memavail=3579800 print_time=2369.661 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84254.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=97162 bytes_read=403514 bytes_retransmit=9 bytes_invalid=0 send_seq=6124 receive_seq=6124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.07 cputime=2165.388 memavail=3579424 print_time=2370.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84255.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=97206 bytes_read=403705 bytes_retransmit=9 bytes_invalid=0 send_seq=6127 receive_seq=6127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.06 cputime=2165.418 memavail=3579432 print_time=2371.664 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84256.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=97245 bytes_read=403876 bytes_retransmit=9 bytes_invalid=0 send_seq=6129 receive_seq=6129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=80.2 pwm=0.000 sysload=0.06 cputime=2165.446 memavail=3579224 print_time=2372.666 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84257.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=97289 bytes_read=404052 bytes_retransmit=9 bytes_invalid=0 send_seq=6132 receive_seq=6132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.06 cputime=2165.475 memavail=3579224 print_time=2373.668 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84258.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=97333 bytes_read=404243 bytes_retransmit=9 bytes_invalid=0 send_seq=6135 receive_seq=6135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.06 cputime=2165.506 memavail=3579272 print_time=2374.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84259.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=97377 bytes_read=404404 bytes_retransmit=9 bytes_invalid=0 send_seq=6138 receive_seq=6138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.06 cputime=2165.534 memavail=3579280 print_time=2375.672 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84260.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97421 bytes_read=404595 bytes_retransmit=9 bytes_invalid=0 send_seq=6141 receive_seq=6141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=80.1 pwm=0.000 sysload=0.06 cputime=2165.566 memavail=3579288 print_time=2376.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84261.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97465 bytes_read=404786 bytes_retransmit=9 bytes_invalid=0 send_seq=6144 receive_seq=6144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999125  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.06 cputime=2165.596 memavail=3579432 print_time=2377.675 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84262.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97509 bytes_read=404947 bytes_retransmit=9 bytes_invalid=0 send_seq=6147 receive_seq=6147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999124  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.06 cputime=2165.624 memavail=3579188 print_time=2378.675 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84263.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97553 bytes_read=405123 bytes_retransmit=9 bytes_invalid=0 send_seq=6150 receive_seq=6150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999127  heater_bed: target=75 temp=80.0 pwm=0.000 sysload=0.06 cputime=2165.656 memavail=3579312 print_time=2379.679 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84264.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97597 bytes_read=405314 bytes_retransmit=9 bytes_invalid=0 send_seq=6153 receive_seq=6153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999127  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.06 cputime=2165.686 memavail=3579132 print_time=2380.680 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84265.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97641 bytes_read=405490 bytes_retransmit=9 bytes_invalid=0 send_seq=6156 receive_seq=6156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999126  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.05 cputime=2165.716 memavail=3579136 print_time=2381.682 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84266.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97685 bytes_read=405666 bytes_retransmit=9 bytes_invalid=0 send_seq=6159 receive_seq=6159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999124  heater_bed: target=75 temp=79.9 pwm=0.000 sysload=0.05 cputime=2165.745 memavail=3579144 print_time=2382.682 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 84267.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97729 bytes_read=405857 bytes_retransmit=9 bytes_invalid=0 send_seq=6162 receive_seq=6162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999123  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.05 cputime=2165.775 memavail=3579144 print_time=2383.684 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84268.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97773 bytes_read=406018 bytes_retransmit=9 bytes_invalid=0 send_seq=6165 receive_seq=6165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.05 cputime=2165.804 memavail=3579164 print_time=2384.685 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 84269.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=97817 bytes_read=406190 bytes_retransmit=9 bytes_invalid=0 send_seq=6168 receive_seq=6168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999121  heater_bed: target=75 temp=79.8 pwm=0.000 sysload=0.05 cputime=2165.832 memavail=3579164 print_time=2385.686 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84270.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=97861 bytes_read=406384 bytes_retransmit=9 bytes_invalid=0 send_seq=6171 receive_seq=6171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999121  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.05 cputime=2165.862 memavail=3579176 print_time=2386.687 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84271.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=97913 bytes_read=406550 bytes_retransmit=9 bytes_invalid=0 send_seq=6175 receive_seq=6175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=79.7 pwm=0.000 sysload=0.05 cputime=2165.892 memavail=3579184 print_time=2387.689 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84272.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=98011 bytes_read=406751 bytes_retransmit=9 bytes_invalid=0 send_seq=6180 receive_seq=6180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999118  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.05 cputime=2165.923 memavail=3579192 print_time=2388.690 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84273.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=98101 bytes_read=406932 bytes_retransmit=9 bytes_invalid=0 send_seq=6184 receive_seq=6184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.05 cputime=2165.953 memavail=3579180 print_time=2389.691 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84274.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=98145 bytes_read=407093 bytes_retransmit=9 bytes_invalid=0 send_seq=6187 receive_seq=6187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999120  heater_bed: target=75 temp=79.6 pwm=0.000 sysload=0.05 cputime=2165.982 memavail=3579144 print_time=2390.693 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84275.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=98189 bytes_read=407299 bytes_retransmit=9 bytes_invalid=0 send_seq=6190 receive_seq=6190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.12 cputime=2166.012 memavail=3579144 print_time=2391.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84276.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=98296 bytes_read=407485 bytes_retransmit=9 bytes_invalid=0 send_seq=6195 receive_seq=6195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999117  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.12 cputime=2166.043 memavail=3578992 print_time=2392.695 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84277.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=98443 bytes_read=407661 bytes_retransmit=9 bytes_invalid=0 send_seq=6201 receive_seq=6201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=79.5 pwm=0.000 sysload=0.12 cputime=2166.073 memavail=3579092 print_time=2393.697 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84278.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=98598 bytes_read=407867 bytes_retransmit=9 bytes_invalid=0 send_seq=6207 receive_seq=6207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999115  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.12 cputime=2166.106 memavail=3579236 print_time=2394.699 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84279.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=98688 bytes_read=408048 bytes_retransmit=9 bytes_invalid=0 send_seq=6211 receive_seq=6211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.12 cputime=2166.135 memavail=3579236 print_time=2395.700 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84280.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=98776 bytes_read=408224 bytes_retransmit=9 bytes_invalid=0 send_seq=6214 receive_seq=6214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=79.4 pwm=0.000 sysload=0.11 cputime=2166.164 memavail=3579264 print_time=2396.702 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84281.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=98869 bytes_read=408420 bytes_retransmit=9 bytes_invalid=0 send_seq=6218 receive_seq=6218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.11 cputime=2166.194 memavail=3579428 print_time=2397.704 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84282.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=98913 bytes_read=408596 bytes_retransmit=9 bytes_invalid=0 send_seq=6221 receive_seq=6221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999104  heater_bed: target=75 temp=79.3 pwm=0.000 sysload=0.11 cputime=2166.226 memavail=3579584 print_time=2398.706 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84283.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=98957 bytes_read=408757 bytes_retransmit=9 bytes_invalid=0 send_seq=6224 receive_seq=6224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.11 cputime=2166.255 memavail=3579672 print_time=2399.706 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84284.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=99001 bytes_read=408948 bytes_retransmit=9 bytes_invalid=0 send_seq=6227 receive_seq=6227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999102  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.11 cputime=2166.285 memavail=3579636 print_time=2400.707 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84285.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=99045 bytes_read=409139 bytes_retransmit=9 bytes_invalid=0 send_seq=6230 receive_seq=6230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999101  heater_bed: target=75 temp=79.2 pwm=0.000 sysload=0.10 cputime=2166.315 memavail=3579784 print_time=2401.708 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84286.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=99089 bytes_read=409300 bytes_retransmit=9 bytes_invalid=0 send_seq=6233 receive_seq=6233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.10 cputime=2166.343 memavail=3579900 print_time=2402.710 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84287.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=99133 bytes_read=409491 bytes_retransmit=9 bytes_invalid=0 send_seq=6236 receive_seq=6236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999123  heater_bed: target=75 temp=79.1 pwm=0.000 sysload=0.10 cputime=2166.371 memavail=3579836 print_time=2403.710 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84288.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=99177 bytes_read=409667 bytes_retransmit=9 bytes_invalid=0 send_seq=6239 receive_seq=6239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999120  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.10 cputime=2166.399 memavail=3579932 print_time=2404.712 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84289.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=99221 bytes_read=409828 bytes_retransmit=9 bytes_invalid=0 send_seq=6242 receive_seq=6242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.10 cputime=2166.428 memavail=3580200 print_time=2405.714 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84290.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=99265 bytes_read=410034 bytes_retransmit=9 bytes_invalid=0 send_seq=6245 receive_seq=6245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=75 temp=79.0 pwm=0.000 sysload=0.10 cputime=2166.458 memavail=3580192 print_time=2406.716 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84291.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=99309 bytes_read=410210 bytes_retransmit=9 bytes_invalid=0 send_seq=6248 receive_seq=6248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999126  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.10 cputime=2166.487 memavail=3580340 print_time=2407.717 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84292.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=99353 bytes_read=410371 bytes_retransmit=9 bytes_invalid=0 send_seq=6251 receive_seq=6251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999124  heater_bed: target=75 temp=78.9 pwm=0.000 sysload=0.10 cputime=2166.513 memavail=3580516 print_time=2408.717 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84293.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=99460 bytes_read=410565 bytes_retransmit=9 bytes_invalid=0 send_seq=6256 receive_seq=6256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999124  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.10 cputime=2166.544 memavail=3580456 print_time=2409.721 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84294.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=99544 bytes_read=410737 bytes_retransmit=9 bytes_invalid=0 send_seq=6260 receive_seq=6260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.10 cputime=2166.573 memavail=3580584 print_time=2410.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84295.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=99588 bytes_read=410913 bytes_retransmit=9 bytes_invalid=0 send_seq=6263 receive_seq=6263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999121  heater_bed: target=75 temp=78.8 pwm=0.000 sysload=0.17 cputime=2166.602 memavail=3580468 print_time=2411.723 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84296.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=99646 bytes_read=411109 bytes_retransmit=9 bytes_invalid=0 send_seq=6267 receive_seq=6267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.17 cputime=2166.632 memavail=3580904 print_time=2412.724 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 84297.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=99779 bytes_read=411295 bytes_retransmit=9 bytes_invalid=0 send_seq=6272 receive_seq=6272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999117  heater_bed: target=75 temp=78.7 pwm=0.000 sysload=0.17 cputime=2166.663 memavail=3580776 print_time=2413.727 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84298.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=99823 bytes_read=411471 bytes_retransmit=9 bytes_invalid=0 send_seq=6275 receive_seq=6275 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.17 cputime=2166.692 memavail=3580996 print_time=2414.728 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84299.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=99867 bytes_read=411647 bytes_retransmit=9 bytes_invalid=0 send_seq=6278 receive_seq=6278 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.17 cputime=2166.721 memavail=3581128 print_time=2415.728 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84300.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=99974 bytes_read=411848 bytes_retransmit=9 bytes_invalid=0 send_seq=6283 receive_seq=6283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999113  heater_bed: target=75 temp=78.6 pwm=0.000 sysload=0.31 cputime=2166.753 memavail=3581236 print_time=2416.732 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84301.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=100058 bytes_read=412029 bytes_retransmit=9 bytes_invalid=0 send_seq=6287 receive_seq=6287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.31 cputime=2166.783 memavail=3581556 print_time=2417.732 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84302.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=100110 bytes_read=412210 bytes_retransmit=9 bytes_invalid=0 send_seq=6291 receive_seq=6291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=13 freq=179999112  heater_bed: target=75 temp=78.5 pwm=0.000 sysload=0.31 cputime=2166.813 memavail=3581264 print_time=2418.733 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84303.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=100194 bytes_read=412391 bytes_retransmit=9 bytes_invalid=0 send_seq=6295 receive_seq=6295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.31 cputime=2166.843 memavail=3581384 print_time=2419.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84304.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=100246 bytes_read=412572 bytes_retransmit=9 bytes_invalid=0 send_seq=6299 receive_seq=6299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.31 cputime=2166.872 memavail=3581464 print_time=2420.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84305.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=100336 bytes_read=412768 bytes_retransmit=9 bytes_invalid=0 send_seq=6303 receive_seq=6303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=75 temp=78.4 pwm=0.000 sysload=0.29 cputime=2166.900 memavail=3581360 print_time=2421.735 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84306.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=100380 bytes_read=412944 bytes_retransmit=9 bytes_invalid=0 send_seq=6306 receive_seq=6306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.29 cputime=2166.929 memavail=3581600 print_time=2422.736 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84307.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=100424 bytes_read=413120 bytes_retransmit=9 bytes_invalid=0 send_seq=6309 receive_seq=6309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=78.3 pwm=0.000 sysload=0.29 cputime=2166.958 memavail=3581564 print_time=2423.738 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84308.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=100468 bytes_read=413296 bytes_retransmit=9 bytes_invalid=0 send_seq=6312 receive_seq=6312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.29 cputime=2166.987 memavail=3581312 print_time=2424.739 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84309.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=100512 bytes_read=413472 bytes_retransmit=9 bytes_invalid=0 send_seq=6315 receive_seq=6315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=75 temp=78.2 pwm=0.000 sysload=0.29 cputime=2167.015 memavail=3581320 print_time=2425.740 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84310.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=100562 bytes_read=413679 bytes_retransmit=9 bytes_invalid=0 send_seq=6319 receive_seq=6319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.27 cputime=2167.045 memavail=3581360 print_time=2426.741 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84311.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=100606 bytes_read=413855 bytes_retransmit=9 bytes_invalid=0 send_seq=6322 receive_seq=6322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.27 cputime=2167.074 memavail=3581368 print_time=2427.743 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 84312.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=100650 bytes_read=414031 bytes_retransmit=9 bytes_invalid=0 send_seq=6325 receive_seq=6325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=78.1 pwm=0.000 sysload=0.27 cputime=2167.101 memavail=3580400 print_time=2428.743 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84313.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=100689 bytes_read=414202 bytes_retransmit=9 bytes_invalid=0 send_seq=6327 receive_seq=6327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.27 cputime=2167.129 memavail=3580468 print_time=2429.745 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84314.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=100733 bytes_read=414378 bytes_retransmit=9 bytes_invalid=0 send_seq=6330 receive_seq=6330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.27 cputime=2167.157 memavail=3580472 print_time=2430.747 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84315.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=100777 bytes_read=414569 bytes_retransmit=9 bytes_invalid=0 send_seq=6333 receive_seq=6333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=78.0 pwm=0.000 sysload=0.24 cputime=2167.186 memavail=3580480 print_time=2431.750 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84316.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=100816 bytes_read=414740 bytes_retransmit=9 bytes_invalid=0 send_seq=6335 receive_seq=6335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.24 cputime=2167.214 memavail=3580484 print_time=2432.750 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84317.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=100860 bytes_read=414907 bytes_retransmit=9 bytes_invalid=0 send_seq=6338 receive_seq=6338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=77.9 pwm=0.000 sysload=0.24 cputime=2167.241 memavail=3580368 print_time=2433.751 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84318.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=100904 bytes_read=415075 bytes_retransmit=9 bytes_invalid=0 send_seq=6341 receive_seq=6341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.24 cputime=2167.270 memavail=3580376 print_time=2434.753 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84319.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=100948 bytes_read=415251 bytes_retransmit=9 bytes_invalid=0 send_seq=6344 receive_seq=6344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.24 cputime=2167.300 memavail=3580288 print_time=2435.754 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84320.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=101000 bytes_read=415447 bytes_retransmit=9 bytes_invalid=0 send_seq=6348 receive_seq=6348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=77.8 pwm=0.000 sysload=0.22 cputime=2167.332 memavail=3580424 print_time=2436.756 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84321.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=101044 bytes_read=415623 bytes_retransmit=9 bytes_invalid=0 send_seq=6351 receive_seq=6351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.22 cputime=2167.360 memavail=3580364 print_time=2437.757 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84322.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=101088 bytes_read=415799 bytes_retransmit=9 bytes_invalid=0 send_seq=6354 receive_seq=6354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=77.7 pwm=0.000 sysload=0.22 cputime=2167.387 memavail=3579452 print_time=2438.757 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84323.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=101132 bytes_read=415975 bytes_retransmit=9 bytes_invalid=0 send_seq=6357 receive_seq=6357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.22 cputime=2167.416 memavail=3579452 print_time=2439.758 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84324.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=101176 bytes_read=416151 bytes_retransmit=9 bytes_invalid=0 send_seq=6360 receive_seq=6360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=77.6 pwm=0.000 sysload=0.22 cputime=2167.445 memavail=3579488 print_time=2440.760 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84325.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=101220 bytes_read=416342 bytes_retransmit=9 bytes_invalid=0 send_seq=6363 receive_seq=6363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.21 cputime=2167.473 memavail=3579556 print_time=2441.760 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84326.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=101270 bytes_read=416518 bytes_retransmit=9 bytes_invalid=0 send_seq=6366 receive_seq=6366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.21 cputime=2167.503 memavail=3579612 print_time=2442.762 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84327.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=101372 bytes_read=416694 bytes_retransmit=9 bytes_invalid=0 send_seq=6370 receive_seq=6369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=77.5 pwm=0.000 sysload=0.21 cputime=2167.533 memavail=3579684 print_time=2443.763 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84328.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=101401 bytes_read=416875 bytes_retransmit=9 bytes_invalid=0 send_seq=6373 receive_seq=6373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.21 cputime=2167.561 memavail=3579628 print_time=2444.765 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84329.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=101445 bytes_read=417051 bytes_retransmit=9 bytes_invalid=0 send_seq=6376 receive_seq=6376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=77.4 pwm=0.000 sysload=0.21 cputime=2167.588 memavail=3579572 print_time=2445.765 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84330.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=101489 bytes_read=417242 bytes_retransmit=9 bytes_invalid=0 send_seq=6379 receive_seq=6379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.27 cputime=2167.617 memavail=3579496 print_time=2446.766 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 84331.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=101539 bytes_read=417418 bytes_retransmit=9 bytes_invalid=0 send_seq=6382 receive_seq=6382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=77.3 pwm=0.000 sysload=0.27 cputime=2167.647 memavail=3579564 print_time=2447.768 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84332.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=101583 bytes_read=417609 bytes_retransmit=9 bytes_invalid=0 send_seq=6385 receive_seq=6385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999118  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.27 cputime=2167.675 memavail=3578836 print_time=2448.769 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84333.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=101627 bytes_read=417770 bytes_retransmit=9 bytes_invalid=0 send_seq=6388 receive_seq=6388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999117  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.27 cputime=2167.706 memavail=3578904 print_time=2449.771 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84334.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=101671 bytes_read=417946 bytes_retransmit=9 bytes_invalid=0 send_seq=6391 receive_seq=6391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999118  heater_bed: target=75 temp=77.2 pwm=0.000 sysload=0.27 cputime=2167.737 memavail=3578816 print_time=2450.773 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84335.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=101715 bytes_read=418152 bytes_retransmit=9 bytes_invalid=0 send_seq=6394 receive_seq=6394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.25 cputime=2167.766 memavail=3578760 print_time=2451.774 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84336.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=101759 bytes_read=418313 bytes_retransmit=9 bytes_invalid=0 send_seq=6397 receive_seq=6397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.25 cputime=2167.793 memavail=3578856 print_time=2452.774 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84337.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=101822 bytes_read=418484 bytes_retransmit=9 bytes_invalid=0 send_seq=6400 receive_seq=6399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999115  heater_bed: target=75 temp=77.1 pwm=0.000 sysload=0.25 cputime=2167.821 memavail=3578740 print_time=2453.775 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84338.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=101842 bytes_read=418675 bytes_retransmit=9 bytes_invalid=0 send_seq=6402 receive_seq=6402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999115  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.25 cputime=2167.850 memavail=3578804 print_time=2454.777 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84339.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=101886 bytes_read=418836 bytes_retransmit=9 bytes_invalid=0 send_seq=6405 receive_seq=6405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999118  heater_bed: target=75 temp=77.0 pwm=0.000 sysload=0.25 cputime=2167.878 memavail=3578820 print_time=2455.778 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84340.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=102055 bytes_read=419042 bytes_retransmit=9 bytes_invalid=0 send_seq=6411 receive_seq=6411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.23 cputime=2167.909 memavail=3579044 print_time=2456.780 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 84341.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=102093 bytes_read=419221 bytes_retransmit=9 bytes_invalid=0 send_seq=6414 receive_seq=6414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999136  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.23 cputime=2167.938 memavail=3579088 print_time=2457.781 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84342.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=102137 bytes_read=419377 bytes_retransmit=9 bytes_invalid=0 send_seq=6417 receive_seq=6417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999131  heater_bed: target=75 temp=76.9 pwm=0.000 sysload=0.23 cputime=2167.964 memavail=3579068 print_time=2458.781 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84343.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=102187 bytes_read=419553 bytes_retransmit=9 bytes_invalid=0 send_seq=6420 receive_seq=6420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999129  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.23 cputime=2167.992 memavail=3579112 print_time=2459.783 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84344.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=102231 bytes_read=419744 bytes_retransmit=9 bytes_invalid=0 send_seq=6423 receive_seq=6423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999128  heater_bed: target=75 temp=76.8 pwm=0.000 sysload=0.23 cputime=2168.022 memavail=3579116 print_time=2460.784 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84345.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=102269 bytes_read=419920 bytes_retransmit=9 bytes_invalid=0 send_seq=6426 receive_seq=6426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999126  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.21 cputime=2168.051 memavail=3579200 print_time=2461.786 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84346.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=102313 bytes_read=420111 bytes_retransmit=9 bytes_invalid=0 send_seq=6429 receive_seq=6429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999127  heater_bed: target=75 temp=76.7 pwm=0.000 sysload=0.21 cputime=2168.078 memavail=3579456 print_time=2462.786 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84347.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=102357 bytes_read=420287 bytes_retransmit=9 bytes_invalid=0 send_seq=6432 receive_seq=6432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999126  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.21 cputime=2168.107 memavail=3579496 print_time=2463.787 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84348.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=102401 bytes_read=420448 bytes_retransmit=9 bytes_invalid=0 send_seq=6435 receive_seq=6435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999123  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.21 cputime=2168.135 memavail=3579684 print_time=2464.790 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84349.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=102451 bytes_read=420639 bytes_retransmit=9 bytes_invalid=0 send_seq=6438 receive_seq=6438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999122  heater_bed: target=75 temp=76.6 pwm=0.000 sysload=0.21 cputime=2168.164 memavail=3579652 print_time=2465.791 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84350.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=102489 bytes_read=420830 bytes_retransmit=9 bytes_invalid=0 send_seq=6441 receive_seq=6441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999123  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.19 cputime=2168.194 memavail=3579656 print_time=2466.792 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84351.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=102597 bytes_read=420996 bytes_retransmit=9 bytes_invalid=0 send_seq=6445 receive_seq=6445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999120  heater_bed: target=75 temp=76.5 pwm=0.000 sysload=0.19 cputime=2168.226 memavail=3579632 print_time=2467.794 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84352.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=102626 bytes_read=421187 bytes_retransmit=9 bytes_invalid=0 send_seq=6448 receive_seq=6448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999120  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.19 cputime=2168.256 memavail=3579960 print_time=2468.794 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84353.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=102676 bytes_read=421363 bytes_retransmit=9 bytes_invalid=0 send_seq=6451 receive_seq=6451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.19 cputime=2168.284 memavail=3579900 print_time=2469.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84354.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=102720 bytes_read=421524 bytes_retransmit=9 bytes_invalid=0 send_seq=6454 receive_seq=6454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=76.4 pwm=0.000 sysload=0.19 cputime=2168.313 memavail=3580032 print_time=2470.801 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84355.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=102758 bytes_read=421730 bytes_retransmit=9 bytes_invalid=0 send_seq=6457 receive_seq=6457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999120  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.34 cputime=2168.344 memavail=3579976 print_time=2471.802 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84356.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=102808 bytes_read=421906 bytes_retransmit=9 bytes_invalid=0 send_seq=6460 receive_seq=6460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999119  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.34 cputime=2168.373 memavail=3579980 print_time=2472.804 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84357.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=102852 bytes_read=422067 bytes_retransmit=9 bytes_invalid=0 send_seq=6463 receive_seq=6463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999117  heater_bed: target=75 temp=76.3 pwm=0.000 sysload=0.34 cputime=2168.401 memavail=3580288 print_time=2473.803 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84358.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=102890 bytes_read=422258 bytes_retransmit=9 bytes_invalid=0 send_seq=6466 receive_seq=6466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.34 cputime=2168.431 memavail=3580200 print_time=2474.804 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84359.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=102940 bytes_read=422434 bytes_retransmit=9 bytes_invalid=0 send_seq=6469 receive_seq=6469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999117  heater_bed: target=75 temp=76.2 pwm=0.000 sysload=0.34 cputime=2168.462 memavail=3580296 print_time=2475.807 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84360.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=102984 bytes_read=422610 bytes_retransmit=9 bytes_invalid=0 send_seq=6472 receive_seq=6472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999117  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.31 cputime=2168.490 memavail=3580332 print_time=2476.807 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84361.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=103028 bytes_read=422801 bytes_retransmit=9 bytes_invalid=0 send_seq=6475 receive_seq=6475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999117  heater_bed: target=75 temp=76.1 pwm=0.000 sysload=0.31 cputime=2168.520 memavail=3580336 print_time=2477.810 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84362.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=103066 bytes_read=422977 bytes_retransmit=9 bytes_invalid=0 send_seq=6478 receive_seq=6478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999116  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.31 cputime=2168.550 memavail=3579892 print_time=2478.811 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84363.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=103116 bytes_read=423138 bytes_retransmit=9 bytes_invalid=0 send_seq=6481 receive_seq=6481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999114  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.31 cputime=2168.579 memavail=3579936 print_time=2479.813 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84364.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=103209 bytes_read=423337 bytes_retransmit=9 bytes_invalid=0 send_seq=6486 receive_seq=6486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999113  heater_bed: target=75 temp=76.0 pwm=0.000 sysload=0.31 cputime=2168.610 memavail=3580116 print_time=2480.817 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84365.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=103253 bytes_read=423518 bytes_retransmit=9 bytes_invalid=0 send_seq=6489 receive_seq=6489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999112  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.29 cputime=2168.640 memavail=3579988 print_time=2481.817 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84366.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=103283 bytes_read=423670 bytes_retransmit=9 bytes_invalid=0 send_seq=6491 receive_seq=6491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=179999111  heater_bed: target=75 temp=75.9 pwm=0.000 sysload=0.29 cputime=2168.668 memavail=3579988 print_time=2482.818 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 84367.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=103330 bytes_read=423861 bytes_retransmit=9 bytes_invalid=0 send_seq=6494 receive_seq=6494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.29 cputime=2168.697 memavail=3580036 print_time=2483.819 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84368.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=103405 bytes_read=424053 bytes_retransmit=9 bytes_invalid=0 send_seq=6498 receive_seq=6498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.29 cputime=2168.727 memavail=3580308 print_time=2484.821 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84369.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=103425 bytes_read=424209 bytes_retransmit=9 bytes_invalid=0 send_seq=6500 receive_seq=6500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=75.8 pwm=0.000 sysload=0.29 cputime=2168.756 memavail=3580336 print_time=2485.822 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84370.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103463 bytes_read=424415 bytes_retransmit=9 bytes_invalid=0 send_seq=6503 receive_seq=6503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.26 cputime=2168.786 memavail=3580268 print_time=2486.824 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84371.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103507 bytes_read=424591 bytes_retransmit=9 bytes_invalid=0 send_seq=6506 receive_seq=6506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.26 cputime=2168.815 memavail=3580324 print_time=2487.825 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84372.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103551 bytes_read=424752 bytes_retransmit=9 bytes_invalid=0 send_seq=6509 receive_seq=6509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999108  heater_bed: target=75 temp=75.7 pwm=0.000 sysload=0.26 cputime=2168.841 memavail=3579292 print_time=2488.826 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84373.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103595 bytes_read=424943 bytes_retransmit=9 bytes_invalid=0 send_seq=6512 receive_seq=6512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999107  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.26 cputime=2168.870 memavail=3579292 print_time=2489.827 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84374.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103639 bytes_read=425119 bytes_retransmit=9 bytes_invalid=0 send_seq=6515 receive_seq=6515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=75.6 pwm=0.000 sysload=0.26 cputime=2168.899 memavail=3579292 print_time=2490.829 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84375.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103683 bytes_read=425310 bytes_retransmit=9 bytes_invalid=0 send_seq=6518 receive_seq=6518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999106  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.32 cputime=2168.929 memavail=3579368 print_time=2491.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84376.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103727 bytes_read=425486 bytes_retransmit=9 bytes_invalid=0 send_seq=6521 receive_seq=6521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=75.5 pwm=0.000 sysload=0.32 cputime=2168.957 memavail=3579368 print_time=2492.832 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84377.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103820 bytes_read=425672 bytes_retransmit=9 bytes_invalid=0 send_seq=6526 receive_seq=6526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999109  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.32 cputime=2168.988 memavail=3579380 print_time=2493.835 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84378.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103864 bytes_read=425848 bytes_retransmit=9 bytes_invalid=0 send_seq=6529 receive_seq=6529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999110  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.32 cputime=2169.020 memavail=3579380 print_time=2494.836 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84379.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=103908 bytes_read=426024 bytes_retransmit=9 bytes_invalid=0 send_seq=6532 receive_seq=6532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999149  heater_bed: target=75 temp=75.4 pwm=0.000 sysload=0.32 cputime=2169.052 memavail=3579416 print_time=2495.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84380.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=103952 bytes_read=426215 bytes_retransmit=9 bytes_invalid=0 send_seq=6535 receive_seq=6535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999147  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.30 cputime=2169.083 memavail=3579464 print_time=2496.841 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84381.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=103996 bytes_read=426391 bytes_retransmit=9 bytes_invalid=0 send_seq=6538 receive_seq=6538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999147  heater_bed: target=75 temp=75.3 pwm=0.000 sysload=0.30 cputime=2169.112 memavail=3579560 print_time=2497.841 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84382.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=104040 bytes_read=426567 bytes_retransmit=9 bytes_invalid=0 send_seq=6541 receive_seq=6541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999143  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.30 cputime=2169.139 memavail=3580388 print_time=2498.841 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84383.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=104084 bytes_read=426743 bytes_retransmit=9 bytes_invalid=0 send_seq=6544 receive_seq=6544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999144  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.30 cputime=2169.168 memavail=3580392 print_time=2499.844 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84384.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=104128 bytes_read=426919 bytes_retransmit=9 bytes_invalid=0 send_seq=6547 receive_seq=6547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999141  heater_bed: target=75 temp=75.2 pwm=0.000 sysload=0.30 cputime=2169.198 memavail=3580552 print_time=2500.846 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84385.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=104172 bytes_read=427110 bytes_retransmit=9 bytes_invalid=0 send_seq=6550 receive_seq=6550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999140  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.27 cputime=2169.228 memavail=3580568 print_time=2501.848 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84386.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=104222 bytes_read=427286 bytes_retransmit=9 bytes_invalid=0 send_seq=6553 receive_seq=6553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999138  heater_bed: target=75 temp=75.1 pwm=0.000 sysload=0.27 cputime=2169.256 memavail=3580684 print_time=2502.848 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 84387.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=104260 bytes_read=427462 bytes_retransmit=9 bytes_invalid=0 send_seq=6556 receive_seq=6556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999136  heater_bed: target=75 temp=75.0 pwm=0.000 sysload=0.27 cputime=2169.285 memavail=3580752 print_time=2503.850 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Autotune: raw=5.785411/0.700000 Ku=0.308109 Tu=242.700000  Kp=47.140630 Ki=0.388468 Kd=1430.128848
Stats 84388.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=104444 bytes_read=427644 bytes_retransmit=9 bytes_invalid=0 send_seq=6562 receive_seq=6561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=179999140  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.27 cputime=2169.319 memavail=3580784 print_time=2504.851 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84389.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=104484 bytes_read=427814 bytes_retransmit=9 bytes_invalid=0 send_seq=6565 receive_seq=6565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999147  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.27 cputime=2169.348 memavail=3580940 print_time=2505.853 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84390.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=104586 bytes_read=428009 bytes_retransmit=9 bytes_invalid=0 send_seq=6569 receive_seq=6569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=179999147  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.25 cputime=2169.379 memavail=3581140 print_time=2506.854 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84391.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=104621 bytes_read=428185 bytes_retransmit=9 bytes_invalid=0 send_seq=6572 receive_seq=6572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999143  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.25 cputime=2169.408 memavail=3581012 print_time=2507.856 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84392.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=104735 bytes_read=428376 bytes_retransmit=9 bytes_invalid=0 send_seq=6578 receive_seq=6578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999143  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.25 cputime=2169.438 memavail=3581784 print_time=2508.857 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84393.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=104779 bytes_read=428552 bytes_retransmit=9 bytes_invalid=0 send_seq=6581 receive_seq=6581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999141  heater_bed: target=80 temp=74.9 pwm=0.700 sysload=0.25 cputime=2169.467 memavail=3581724 print_time=2509.858 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84394.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=104877 bytes_read=428738 bytes_retransmit=9 bytes_invalid=0 send_seq=6586 receive_seq=6586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999138  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.25 cputime=2169.499 memavail=3581764 print_time=2510.862 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84395.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=104921 bytes_read=428929 bytes_retransmit=9 bytes_invalid=0 send_seq=6589 receive_seq=6589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999138  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.23 cputime=2169.530 memavail=3581800 print_time=2511.862 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84396.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=104976 bytes_read=429105 bytes_retransmit=9 bytes_invalid=0 send_seq=6592 receive_seq=6592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999135  heater_bed: target=80 temp=75.0 pwm=0.700 sysload=0.23 cputime=2169.560 memavail=3581912 print_time=2512.862 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84397.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=105020 bytes_read=429281 bytes_retransmit=9 bytes_invalid=0 send_seq=6595 receive_seq=6595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999133  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.23 cputime=2169.589 memavail=3581996 print_time=2513.864 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84398.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=105064 bytes_read=429457 bytes_retransmit=9 bytes_invalid=0 send_seq=6598 receive_seq=6598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999131  heater_bed: target=80 temp=75.1 pwm=0.700 sysload=0.23 cputime=2169.617 memavail=3581900 print_time=2514.867 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84399.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=105108 bytes_read=429633 bytes_retransmit=9 bytes_invalid=0 send_seq=6601 receive_seq=6601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999128  heater_bed: target=80 temp=75.2 pwm=0.700 sysload=0.23 cputime=2169.646 memavail=3581968 print_time=2515.867 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84400.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105152 bytes_read=429839 bytes_retransmit=9 bytes_invalid=0 send_seq=6604 receive_seq=6604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999127  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.21 cputime=2169.676 memavail=3582096 print_time=2516.869 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84401.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105218 bytes_read=430005 bytes_retransmit=9 bytes_invalid=0 send_seq=6608 receive_seq=6608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999126  heater_bed: target=80 temp=75.3 pwm=0.700 sysload=0.21 cputime=2169.705 memavail=3582112 print_time=2517.869 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84402.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105262 bytes_read=430181 bytes_retransmit=9 bytes_invalid=0 send_seq=6611 receive_seq=6611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999123  heater_bed: target=80 temp=75.4 pwm=0.700 sysload=0.21 cputime=2169.735 memavail=3582132 print_time=2518.871 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 84403.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105300 bytes_read=430372 bytes_retransmit=9 bytes_invalid=0 send_seq=6614 receive_seq=6614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999121  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.21 cputime=2169.764 memavail=3582080 print_time=2519.873 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84404.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105344 bytes_read=430533 bytes_retransmit=9 bytes_invalid=0 send_seq=6617 receive_seq=6617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999119  heater_bed: target=80 temp=75.5 pwm=0.700 sysload=0.21 cputime=2169.795 memavail=3582012 print_time=2520.876 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84405.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105448 bytes_read=430734 bytes_retransmit=9 bytes_invalid=0 send_seq=6622 receive_seq=6622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999119  heater_bed: target=80 temp=75.6 pwm=0.700 sysload=0.19 cputime=2169.826 memavail=3582208 print_time=2521.879 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84406.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105492 bytes_read=430925 bytes_retransmit=9 bytes_invalid=0 send_seq=6625 receive_seq=6625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999117  heater_bed: target=80 temp=75.7 pwm=0.700 sysload=0.19 cputime=2169.854 memavail=3582148 print_time=2522.880 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84407.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105536 bytes_read=431086 bytes_retransmit=9 bytes_invalid=0 send_seq=6628 receive_seq=6628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=75.7 pwm=0.700 sysload=0.19 cputime=2169.884 memavail=3582088 print_time=2523.881 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84408.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105586 bytes_read=431262 bytes_retransmit=9 bytes_invalid=0 send_seq=6631 receive_seq=6631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=75.8 pwm=0.700 sysload=0.19 cputime=2169.913 memavail=3582024 print_time=2524.883 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84409.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=105646 bytes_read=431458 bytes_retransmit=9 bytes_invalid=0 send_seq=6635 receive_seq=6635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=75.9 pwm=0.700 sysload=0.19 cputime=2169.942 memavail=3582140 print_time=2525.884 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84410.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=105684 bytes_read=431634 bytes_retransmit=9 bytes_invalid=0 send_seq=6638 receive_seq=6638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=76.0 pwm=0.700 sysload=0.18 cputime=2169.970 memavail=3582168 print_time=2526.886 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84411.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=105728 bytes_read=431825 bytes_retransmit=9 bytes_invalid=0 send_seq=6641 receive_seq=6641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=76.1 pwm=0.700 sysload=0.18 cputime=2170.000 memavail=3582140 print_time=2527.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84412.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=105772 bytes_read=431995 bytes_retransmit=9 bytes_invalid=0 send_seq=6644 receive_seq=6644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=76.2 pwm=0.700 sysload=0.18 cputime=2170.030 memavail=3581920 print_time=2528.891 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84413.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=105832 bytes_read=432151 bytes_retransmit=9 bytes_invalid=0 send_seq=6648 receive_seq=6648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=76.3 pwm=0.700 sysload=0.18 cputime=2170.060 memavail=3581920 print_time=2529.893 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84414.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=105876 bytes_read=432341 bytes_retransmit=9 bytes_invalid=0 send_seq=6651 receive_seq=6651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=76.3 pwm=0.700 sysload=0.18 cputime=2170.089 memavail=3581860 print_time=2530.893 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84415.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=105920 bytes_read=432532 bytes_retransmit=9 bytes_invalid=0 send_seq=6654 receive_seq=6654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999112  heater_bed: target=80 temp=76.4 pwm=0.700 sysload=0.16 cputime=2170.118 memavail=3581860 print_time=2531.896 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84416.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=105964 bytes_read=432693 bytes_retransmit=9 bytes_invalid=0 send_seq=6657 receive_seq=6657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999110  heater_bed: target=80 temp=76.5 pwm=0.700 sysload=0.16 cputime=2170.147 memavail=3582092 print_time=2532.897 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84417.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=106078 bytes_read=432899 bytes_retransmit=9 bytes_invalid=0 send_seq=6663 receive_seq=6663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999109  heater_bed: target=80 temp=76.6 pwm=0.700 sysload=0.16 cputime=2170.179 memavail=3582092 print_time=2533.901 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84418.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=106122 bytes_read=433075 bytes_retransmit=9 bytes_invalid=0 send_seq=6666 receive_seq=6666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999107  heater_bed: target=80 temp=76.7 pwm=0.700 sysload=0.16 cputime=2170.207 memavail=3582088 print_time=2534.901 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84419.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=106166 bytes_read=433236 bytes_retransmit=9 bytes_invalid=0 send_seq=6669 receive_seq=6669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=76.8 pwm=0.700 sysload=0.16 cputime=2170.235 memavail=3582212 print_time=2535.902 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84420.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=106210 bytes_read=433442 bytes_retransmit=9 bytes_invalid=0 send_seq=6672 receive_seq=6672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=76.9 pwm=0.700 sysload=0.15 cputime=2170.264 memavail=3582212 print_time=2536.904 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84421.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=106254 bytes_read=433618 bytes_retransmit=9 bytes_invalid=0 send_seq=6675 receive_seq=6675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999106  heater_bed: target=80 temp=77.0 pwm=0.700 sysload=0.15 cputime=2170.294 memavail=3582364 print_time=2537.906 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84422.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=106320 bytes_read=433784 bytes_retransmit=9 bytes_invalid=0 send_seq=6679 receive_seq=6679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=77.1 pwm=0.700 sysload=0.15 cputime=2170.322 memavail=3582228 print_time=2538.907 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 84423.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=106364 bytes_read=433975 bytes_retransmit=9 bytes_invalid=0 send_seq=6682 receive_seq=6682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999105  heater_bed: target=80 temp=77.2 pwm=0.700 sysload=0.15 cputime=2170.350 memavail=3582216 print_time=2539.909 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84424.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=106462 bytes_read=434161 bytes_retransmit=9 bytes_invalid=0 send_seq=6687 receive_seq=6687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999104  heater_bed: target=80 temp=77.3 pwm=0.700 sysload=0.15 cputime=2170.378 memavail=3582464 print_time=2540.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84425.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=106506 bytes_read=434337 bytes_retransmit=9 bytes_invalid=0 send_seq=6690 receive_seq=6690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999101  heater_bed: target=80 temp=77.4 pwm=0.700 sysload=0.14 cputime=2170.407 memavail=3582560 print_time=2541.913 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84426.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=106560 bytes_read=434533 bytes_retransmit=9 bytes_invalid=0 send_seq=6694 receive_seq=6694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999100  heater_bed: target=80 temp=77.5 pwm=0.700 sysload=0.14 cputime=2170.436 memavail=3582528 print_time=2542.916 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84427.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=106669 bytes_read=434725 bytes_retransmit=9 bytes_invalid=0 send_seq=6698 receive_seq=6698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999117  heater_bed: target=80 temp=77.6 pwm=0.700 sysload=0.14 cputime=2170.467 memavail=3582612 print_time=2543.918 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84428.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=106698 bytes_read=434886 bytes_retransmit=9 bytes_invalid=0 send_seq=6701 receive_seq=6701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=77.7 pwm=0.700 sysload=0.14 cputime=2170.496 memavail=3582680 print_time=2544.920 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84429.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=106742 bytes_read=435077 bytes_retransmit=9 bytes_invalid=0 send_seq=6704 receive_seq=6704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=77.8 pwm=0.700 sysload=0.14 cputime=2170.525 memavail=3582708 print_time=2545.921 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84430.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=106808 bytes_read=435273 bytes_retransmit=9 bytes_invalid=0 send_seq=6708 receive_seq=6708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999117  heater_bed: target=80 temp=77.9 pwm=0.700 sysload=0.13 cputime=2170.555 memavail=3582752 print_time=2546.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84431.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=106852 bytes_read=435434 bytes_retransmit=9 bytes_invalid=0 send_seq=6711 receive_seq=6711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=78.0 pwm=0.700 sysload=0.13 cputime=2170.584 memavail=3582872 print_time=2547.924 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84432.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=107014 bytes_read=435630 bytes_retransmit=9 bytes_invalid=0 send_seq=6716 receive_seq=6715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=78.1 pwm=0.700 sysload=0.13 cputime=2170.613 memavail=3582924 print_time=2548.924 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84433.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=107060 bytes_read=435811 bytes_retransmit=9 bytes_invalid=0 send_seq=6719 receive_seq=6719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=78.2 pwm=0.700 sysload=0.13 cputime=2170.641 memavail=3582932 print_time=2549.926 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84434.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=107114 bytes_read=435992 bytes_retransmit=9 bytes_invalid=0 send_seq=6723 receive_seq=6723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=78.3 pwm=0.700 sysload=0.13 cputime=2170.672 memavail=3582816 print_time=2550.928 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84435.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=107164 bytes_read=436183 bytes_retransmit=9 bytes_invalid=0 send_seq=6726 receive_seq=6726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=78.4 pwm=0.700 sysload=0.12 cputime=2170.702 memavail=3582996 print_time=2551.929 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84436.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=107208 bytes_read=436351 bytes_retransmit=9 bytes_invalid=0 send_seq=6729 receive_seq=6729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=78.5 pwm=0.700 sysload=0.12 cputime=2170.731 memavail=3582996 print_time=2552.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84437.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=107304 bytes_read=436518 bytes_retransmit=9 bytes_invalid=0 send_seq=6733 receive_seq=6732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=78.6 pwm=0.700 sysload=0.12 cputime=2170.761 memavail=3583016 print_time=2553.932 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84438.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=107349 bytes_read=436704 bytes_retransmit=9 bytes_invalid=0 send_seq=6737 receive_seq=6737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999119  heater_bed: target=80 temp=78.6 pwm=0.700 sysload=0.12 cputime=2170.789 memavail=3583164 print_time=2554.933 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84439.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=107393 bytes_read=436880 bytes_retransmit=9 bytes_invalid=0 send_seq=6740 receive_seq=6740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999118  heater_bed: target=80 temp=78.8 pwm=0.700 sysload=0.12 cputime=2170.818 memavail=3583164 print_time=2555.935 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84440.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=107443 bytes_read=437071 bytes_retransmit=9 bytes_invalid=0 send_seq=6743 receive_seq=6743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999119  heater_bed: target=80 temp=78.9 pwm=0.700 sysload=0.11 cputime=2170.848 memavail=3583172 print_time=2556.938 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84441.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=107481 bytes_read=437247 bytes_retransmit=9 bytes_invalid=0 send_seq=6746 receive_seq=6746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999118  heater_bed: target=80 temp=79.0 pwm=0.700 sysload=0.11 cputime=2170.878 memavail=3583100 print_time=2557.939 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 84442.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=107531 bytes_read=437423 bytes_retransmit=9 bytes_invalid=0 send_seq=6749 receive_seq=6749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999117  heater_bed: target=80 temp=79.1 pwm=0.700 sysload=0.11 cputime=2170.908 memavail=3582628 print_time=2558.940 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84443.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=107591 bytes_read=437604 bytes_retransmit=9 bytes_invalid=0 send_seq=6753 receive_seq=6753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=79.1 pwm=0.700 sysload=0.11 cputime=2170.937 memavail=3582628 print_time=2559.942 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84444.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=107629 bytes_read=437780 bytes_retransmit=9 bytes_invalid=0 send_seq=6756 receive_seq=6756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999118  heater_bed: target=80 temp=79.3 pwm=0.700 sysload=0.11 cputime=2170.966 memavail=3582628 print_time=2560.942 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84445.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=107673 bytes_read=437971 bytes_retransmit=9 bytes_invalid=0 send_seq=6759 receive_seq=6759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=79.3 pwm=0.700 sysload=0.18 cputime=2170.996 memavail=3582628 print_time=2561.944 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84446.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=107717 bytes_read=438147 bytes_retransmit=9 bytes_invalid=0 send_seq=6762 receive_seq=6762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999116  heater_bed: target=80 temp=79.5 pwm=0.700 sysload=0.18 cputime=2171.025 memavail=3582548 print_time=2562.945 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84447.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=107783 bytes_read=438328 bytes_retransmit=9 bytes_invalid=0 send_seq=6766 receive_seq=6766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999117  heater_bed: target=80 temp=79.5 pwm=0.700 sysload=0.18 cputime=2171.055 memavail=3582552 print_time=2563.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84448.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=107889 bytes_read=438514 bytes_retransmit=9 bytes_invalid=0 send_seq=6771 receive_seq=6771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999114  heater_bed: target=80 temp=79.7 pwm=0.700 sysload=0.18 cputime=2171.086 memavail=3582708 print_time=2564.949 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84449.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=107933 bytes_read=438690 bytes_retransmit=9 bytes_invalid=0 send_seq=6774 receive_seq=6774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=179999115  heater_bed: target=80 temp=79.8 pwm=0.700 sysload=0.18 cputime=2171.114 memavail=3582712 print_time=2565.949 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84450.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=107983 bytes_read=438881 bytes_retransmit=9 bytes_invalid=0 send_seq=6777 receive_seq=6777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=79.9 pwm=0.700 sysload=0.33 cputime=2171.141 memavail=3582716 print_time=2566.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84451.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=108062 bytes_read=439062 bytes_retransmit=9 bytes_invalid=0 send_seq=6781 receive_seq=6781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=80 temp=79.9 pwm=0.700 sysload=0.33 cputime=2171.171 memavail=3582732 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Autotune: raw=-5.739915/0.700000 Ku=0.310551 Tu=240.600000  Kp=47.514277 Ki=0.394965 Kd=1428.991874
Autotune: raw=5.811367/0.700000 Ku=0.306733 Tu=236.100000  Kp=46.930078 Ki=0.397544 Kd=1385.023923
Autotune: final: Kp=46.930078 Ki=0.397544 Kd=1385.023923
PID parameters: pid_Kp=46.930 pid_Ki=0.398 pid_Kd=1385.024
The SAVE_CONFIG command will update the printer config file
with these parameters and restart the printer.
save_config: set [heater_bed] control = pid
save_config: set [heater_bed] pid_Kp = 46.930
save_config: set [heater_bed] pid_Ki = 0.398
save_config: set [heater_bed] pid_Kd = 1385.024
Stats 84452.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=108855 bytes_read=439308 bytes_retransmit=9 bytes_invalid=0 send_seq=6798 receive_seq=6798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=9 freq=179999111  heater_bed: target=0 temp=80.1 pwm=0.000 sysload=0.33 cputime=2171.223 memavail=3582500 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84453.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=108931 bytes_read=439479 bytes_retransmit=9 bytes_invalid=0 send_seq=6800 receive_seq=6800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999124  heater_bed: target=0 temp=80.2 pwm=0.000 sysload=0.33 cputime=2171.248 memavail=3582500 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84454.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=108937 bytes_read=439645 bytes_retransmit=9 bytes_invalid=0 send_seq=6801 receive_seq=6801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999121  heater_bed: target=0 temp=80.3 pwm=0.000 sysload=0.33 cputime=2171.271 memavail=3582504 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84455.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=108943 bytes_read=439826 bytes_retransmit=9 bytes_invalid=0 send_seq=6802 receive_seq=6802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=0 temp=80.4 pwm=0.000 sysload=0.30 cputime=2171.296 memavail=3582516 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84456.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=108949 bytes_read=439992 bytes_retransmit=9 bytes_invalid=0 send_seq=6803 receive_seq=6803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=9 freq=179999119  heater_bed: target=0 temp=80.4 pwm=0.000 sysload=0.30 cputime=2171.321 memavail=3582516 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84457.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=108955 bytes_read=440158 bytes_retransmit=9 bytes_invalid=0 send_seq=6804 receive_seq=6804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=9 freq=179999118  heater_bed: target=0 temp=80.5 pwm=0.000 sysload=0.30 cputime=2171.346 memavail=3582516 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84458.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=108975 bytes_read=440329 bytes_retransmit=9 bytes_invalid=0 send_seq=6806 receive_seq=6806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999117  heater_bed: target=0 temp=80.5 pwm=0.000 sysload=0.30 cputime=2171.371 memavail=3582532 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 84459.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=108989 bytes_read=440500 bytes_retransmit=9 bytes_invalid=0 send_seq=6808 receive_seq=6808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999114  heater_bed: target=0 temp=80.5 pwm=0.000 sysload=0.30 cputime=2171.397 memavail=3582412 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84460.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=109041 bytes_read=440676 bytes_retransmit=9 bytes_invalid=0 send_seq=6810 receive_seq=6810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999113  heater_bed: target=0 temp=80.6 pwm=0.000 sysload=0.27 cputime=2171.422 memavail=3582424 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84461.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=109061 bytes_read=440840 bytes_retransmit=9 bytes_invalid=0 send_seq=6812 receive_seq=6812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=0 temp=80.6 pwm=0.000 sysload=0.27 cputime=2171.446 memavail=3582428 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84462.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=109067 bytes_read=441021 bytes_retransmit=9 bytes_invalid=0 send_seq=6813 receive_seq=6813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999111  heater_bed: target=0 temp=80.6 pwm=0.000 sysload=0.27 cputime=2171.470 memavail=3582608 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84463.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=109073 bytes_read=441172 bytes_retransmit=9 bytes_invalid=0 send_seq=6814 receive_seq=6814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999109  heater_bed: target=0 temp=80.6 pwm=0.000 sysload=0.27 cputime=2171.494 memavail=3582608 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84464.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=109079 bytes_read=441338 bytes_retransmit=9 bytes_invalid=0 send_seq=6815 receive_seq=6815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999110  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.27 cputime=2171.520 memavail=3582612 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84465.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109094 bytes_read=441533 bytes_retransmit=9 bytes_invalid=0 send_seq=6816 receive_seq=6816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.33 cputime=2171.546 memavail=3582616 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84466.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109100 bytes_read=441684 bytes_retransmit=9 bytes_invalid=0 send_seq=6817 receive_seq=6817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.33 cputime=2171.571 memavail=3582424 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84467.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109106 bytes_read=441850 bytes_retransmit=9 bytes_invalid=0 send_seq=6818 receive_seq=6818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999121  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.33 cputime=2171.598 memavail=3582424 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84468.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109112 bytes_read=442031 bytes_retransmit=9 bytes_invalid=0 send_seq=6819 receive_seq=6819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999123  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.33 cputime=2171.624 memavail=3582424 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84469.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109132 bytes_read=442187 bytes_retransmit=9 bytes_invalid=0 send_seq=6821 receive_seq=6821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999121  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.33 cputime=2171.650 memavail=3582424 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84470.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109138 bytes_read=442367 bytes_retransmit=9 bytes_invalid=0 send_seq=6822 receive_seq=6822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999124  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.39 cputime=2171.677 memavail=3582600 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84471.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109144 bytes_read=442548 bytes_retransmit=9 bytes_invalid=0 send_seq=6823 receive_seq=6823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999122  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.39 cputime=2171.702 memavail=3582612 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84472.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109150 bytes_read=442699 bytes_retransmit=9 bytes_invalid=0 send_seq=6824 receive_seq=6824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999120  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.39 cputime=2171.726 memavail=3582644 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84473.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109170 bytes_read=442870 bytes_retransmit=9 bytes_invalid=0 send_seq=6826 receive_seq=6826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999119  heater_bed: target=0 temp=80.6 pwm=0.000 sysload=0.39 cputime=2171.752 memavail=3582644 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84474.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=109176 bytes_read=443051 bytes_retransmit=9 bytes_invalid=0 send_seq=6827 receive_seq=6827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999117  heater_bed: target=0 temp=80.7 pwm=0.000 sysload=0.39 cputime=2171.778 memavail=3582644 print_time=2567.951 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
SAVE_CONFIG to '/home/pi/klipper_config/printer.cfg' (backup in '/home/pi/klipper_config/printer-20220918_074249.cfg')
Stats 84475.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000012 mcu_task_stddev=0.000030 bytes_write=109660 bytes_read=443267 bytes_retransmit=9 bytes_invalid=0 send_seq=6838 receive_seq=6838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999117  heater_bed: target=0 temp=80.6 pwm=0.000 sysload=0.60 cputime=2171.948 memavail=3582652 print_time=2592.577 buffer_time=0.342 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
webhooks client 3042242072: Disconnected
Restarting printer
Start printer at Sun Sep 18 07:42:51 2022 (1663508571.1 84477.2)
===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 46.930
pid_ki = 0.398
pid_kd = 1385.024

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 80
target_temp = 35.0
control = pid
hardware_pwm = true
pid_kp = 40.0
pid_ki = 5.0
pid_kd = 0.01
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
description = Set the chamber target temperature.
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
webhooks client 3044712816: New connection
webhooks client 3044712816: Client info {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
mcu 'mcu': got {'#receive_time': 84479.403920572, u'next_clock': 3454132032L, u'oid': 27, u'value': 23872, '#name': u'analog_in_state', '#sent_time': 84479.398715479}
mcu 'mcu': got {'#receive_time': 84479.463922924, u'next_clock': 3464932032L, u'oid': 33, u'value': 31287, '#name': u'analog_in_state', '#sent_time': 84479.449399776}
mcu 'mcu': got {'#receive_time': 84479.543951479, u'next_clock': 3479332032L, u'oid': 41, u'value': 31154, '#name': u'analog_in_state', '#sent_time': 84479.500059035}
mcu 'mcu': got {'#receive_time': 84479.703943238, u'next_clock': 3508132032L, u'oid': 27, u'value': 23875, '#name': u'analog_in_state', '#sent_time': 84479.653910738}
Loaded MCU 'mcu' 105 commands (v0.10.0-563-g354915d2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 15.0)    | (40.0, 40.0)
  1   | (107.5, 15.0)   | (107.5, 40.0)
  2   | (175.0, 15.0)   | (175.0, 40.0)
  3   | (242.5, 15.0)   | (242.5, 40.0)
  4   | (310.0, 15.0)   | (310.0, 40.0)
  5   | (310.0, 82.5)   | (310.0, 107.5)
  6   | (242.5, 82.5)   | (242.5, 107.5)
  7   | (175.0, 82.5)   | (175.0, 107.5)
  8   | (107.5, 82.5)   | (107.5, 107.5)
  9   | (40.0, 82.5)    | (40.0, 107.5)
  10  | (40.0, 150.0)   | (40.0, 175.0)
  11  | (107.5, 150.0)  | (107.5, 175.0)
  12  | (175.0, 150.0)  | (175.0, 175.0)
  13  | (242.5, 150.0)  | (242.5, 175.0)
  14  | (310.0, 150.0)  | (310.0, 175.0)
  15  | (310.0, 217.5)  | (310.0, 242.5)
  16  | (242.5, 217.5)  | (242.5, 242.5)
  17  | (175.0, 217.5)  | (175.0, 242.5)
  18  | (107.5, 217.5)  | (107.5, 242.5)
  19  | (40.0, 217.5)   | (40.0, 242.5)
  20  | (40.0, 285.0)   | (40.0, 310.0)
  21  | (107.5, 285.0)  | (107.5, 310.0)
  22  | (175.0, 285.0)  | (175.0, 310.0)
  23  | (242.5, 285.0)  | (242.5, 310.0)
  24  | (310.0, 285.0)  | (310.0, 310.0)
bed_mesh: relative_reference_index 12 is (175.00, 175.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Write g-code response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/gcode.py", line 446, in _respond_raw
    os.write(self.fd, (msg+"\n").encode())
OSError: [Errno 11] Resource temporarily unavailable
webhooks: registering remote method 'shutdown_machine' for connection id: 3044712816
webhooks: registering remote method 'reboot_machine' for connection id: 3044712816
webhooks: registering remote method 'pause_job_queue' for connection id: 3044712816
webhooks: registering remote method 'start_job_queue' for connection id: 3044712816
webhooks: registering remote method 'timelapse_newframe' for connection id: 3044712816
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 3044712816
webhooks: registering remote method 'timelapse_render' for connection id: 3044712816
Stats 84481.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6352 bytes_read=6830 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180003856  heater_bed: target=0 temp=80.6 pwm=0.000 sysload=0.63 cputime=0.094 memavail=3583060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84482.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6562 bytes_read=7016 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002344  heater_bed: target=0 temp=80.5 pwm=0.000 sysload=0.63 cputime=0.125 memavail=3583056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84483.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6568 bytes_read=7182 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001017  heater_bed: target=0 temp=80.5 pwm=0.000 sysload=0.63 cputime=0.148 memavail=3583060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84484.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6574 bytes_read=7343 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000559  heater_bed: target=0 temp=80.5 pwm=0.000 sysload=0.63 cputime=0.173 memavail=3583064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84485.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6634 bytes_read=7508 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000321  heater_bed: target=0 temp=80.5 pwm=0.000 sysload=0.58 cputime=0.200 memavail=3583064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84486.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000044 mcu_task_stddev=0.000068 bytes_write=6640 bytes_read=7690 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000459  heater_bed: target=0 temp=80.4 pwm=0.000 sysload=0.58 cputime=0.225 memavail=3582976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84487.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000044 mcu_task_stddev=0.000068 bytes_write=6646 bytes_read=7856 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000163  heater_bed: target=0 temp=80.4 pwm=0.000 sysload=0.58 cputime=0.250 memavail=3582976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84488.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000044 mcu_task_stddev=0.000068 bytes_write=6652 bytes_read=8022 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000008  heater_bed: target=0 temp=80.4 pwm=0.000 sysload=0.58 cputime=0.274 memavail=3582988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84489.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000044 mcu_task_stddev=0.000068 bytes_write=6658 bytes_read=8188 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999902  heater_bed: target=0 temp=80.4 pwm=0.000 sysload=0.58 cputime=0.298 memavail=3582988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84490.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000044 mcu_task_stddev=0.000068 bytes_write=6664 bytes_read=8354 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999798  heater_bed: target=0 temp=80.4 pwm=0.000 sysload=0.61 cputime=0.323 memavail=3582988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84491.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6670 bytes_read=8534 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999717  heater_bed: target=0 temp=80.3 pwm=0.000 sysload=0.61 cputime=0.348 memavail=3582900 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84492.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6676 bytes_read=8700 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999738  heater_bed: target=0 temp=80.3 pwm=0.000 sysload=0.61 cputime=0.372 memavail=3582864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84493.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6682 bytes_read=8866 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999685  heater_bed: target=0 temp=80.3 pwm=0.000 sysload=0.61 cputime=0.397 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84494.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6688 bytes_read=9032 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999622  heater_bed: target=0 temp=80.2 pwm=0.000 sysload=0.61 cputime=0.424 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84495.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6694 bytes_read=9198 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999648  heater_bed: target=0 temp=80.2 pwm=0.000 sysload=0.64 cputime=0.451 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84496.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6700 bytes_read=9378 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999588  heater_bed: target=0 temp=80.2 pwm=0.000 sysload=0.64 cputime=0.477 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84497.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6706 bytes_read=9544 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999538  heater_bed: target=0 temp=80.2 pwm=0.000 sysload=0.64 cputime=0.503 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84498.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6712 bytes_read=9710 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=80.1 pwm=0.000 sysload=0.64 cputime=0.530 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84499.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6718 bytes_read=9876 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=80.1 pwm=0.000 sysload=0.64 cputime=0.557 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84500.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6724 bytes_read=10042 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=80.0 pwm=0.000 sysload=0.75 cputime=0.584 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84501.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6730 bytes_read=10222 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999540  heater_bed: target=0 temp=80.0 pwm=0.000 sysload=0.75 cputime=0.612 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84502.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6736 bytes_read=10388 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999503  heater_bed: target=0 temp=80.0 pwm=0.000 sysload=0.75 cputime=0.638 memavail=3583132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84503.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6742 bytes_read=10554 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=79.9 pwm=0.000 sysload=0.75 cputime=0.665 memavail=3583008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 84504.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6748 bytes_read=10720 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999443  heater_bed: target=0 temp=79.9 pwm=0.000 sysload=0.75 cputime=0.691 memavail=3583084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84505.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6754 bytes_read=10886 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=0 temp=79.9 pwm=0.000 sysload=0.69 cputime=0.716 memavail=3583084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84506.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6760 bytes_read=11066 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999403  heater_bed: target=0 temp=79.9 pwm=0.000 sysload=0.69 cputime=0.743 memavail=3583092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84507.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6766 bytes_read=11232 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=79.8 pwm=0.000 sysload=0.69 cputime=0.770 memavail=3583092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84508.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6772 bytes_read=11390 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999409  heater_bed: target=0 temp=79.8 pwm=0.000 sysload=0.69 cputime=0.796 memavail=3583092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84509.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6778 bytes_read=11547 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999392  heater_bed: target=0 temp=79.8 pwm=0.000 sysload=0.69 cputime=0.824 memavail=3583092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84510.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6784 bytes_read=11712 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999370  heater_bed: target=0 temp=79.7 pwm=0.000 sysload=0.64 cputime=0.850 memavail=3583092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84511.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6790 bytes_read=11892 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999356  heater_bed: target=0 temp=79.7 pwm=0.000 sysload=0.64 cputime=0.877 memavail=3583092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84512.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6796 bytes_read=12058 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999373  heater_bed: target=0 temp=79.7 pwm=0.000 sysload=0.64 cputime=0.903 memavail=3584108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 84513.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6808 bytes_read=12240 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999336  heater_bed: target=0 temp=79.6 pwm=0.000 sysload=0.64 cputime=0.927 memavail=3584136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84514.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6814 bytes_read=12406 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999320  heater_bed: target=0 temp=79.6 pwm=0.000 sysload=0.64 cputime=0.953 memavail=3584148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84515.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6820 bytes_read=12572 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999309  heater_bed: target=0 temp=79.5 pwm=0.000 sysload=0.58 cputime=0.980 memavail=3584148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84516.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6826 bytes_read=12752 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999300  heater_bed: target=0 temp=79.5 pwm=0.000 sysload=0.58 cputime=1.006 memavail=3584148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84517.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6832 bytes_read=12918 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999289  heater_bed: target=0 temp=79.5 pwm=0.000 sysload=0.58 cputime=1.033 memavail=3584148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84518.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6906 bytes_read=13094 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999279  heater_bed: target=0 temp=79.4 pwm=0.000 sysload=0.58 cputime=1.064 memavail=3584156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84519.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6912 bytes_read=13260 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999276  heater_bed: target=0 temp=79.4 pwm=0.000 sysload=0.58 cputime=1.089 memavail=3584156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84520.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6918 bytes_read=13426 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999269  heater_bed: target=0 temp=79.4 pwm=0.000 sysload=0.54 cputime=1.115 memavail=3584156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84521.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=6924 bytes_read=13607 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999269  heater_bed: target=0 temp=79.3 pwm=0.000 sysload=0.54 cputime=1.142 memavail=3584156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84522.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=6930 bytes_read=13773 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999264  heater_bed: target=0 temp=79.3 pwm=0.000 sysload=0.54 cputime=1.168 memavail=3583800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84523.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=6936 bytes_read=13954 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999261  heater_bed: target=0 temp=79.2 pwm=0.000 sysload=0.54 cputime=1.192 memavail=3583800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84524.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=6942 bytes_read=14105 bytes_retransmit=9 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999262  heater_bed: target=0 temp=79.2 pwm=0.000 sysload=0.54 cputime=1.218 memavail=3583916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84525.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=6948 bytes_read=14271 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999259  heater_bed: target=0 temp=79.2 pwm=0.000 sysload=0.49 cputime=1.243 memavail=3583916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84526.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6954 bytes_read=14466 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999259  heater_bed: target=0 temp=79.1 pwm=0.000 sysload=0.49 cputime=1.269 memavail=3583916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84527.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6960 bytes_read=14617 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999255  heater_bed: target=0 temp=79.1 pwm=0.000 sysload=0.49 cputime=1.295 memavail=3583916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84528.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6966 bytes_read=14783 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999251  heater_bed: target=0 temp=79.0 pwm=0.000 sysload=0.49 cputime=1.321 memavail=3583916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84529.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6972 bytes_read=14964 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999246  heater_bed: target=0 temp=79.0 pwm=0.000 sysload=0.49 cputime=1.349 memavail=3583916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84530.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6978 bytes_read=15115 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999245  heater_bed: target=0 temp=79.0 pwm=0.000 sysload=0.45 cputime=1.376 memavail=3583924 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84531.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6984 bytes_read=15295 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999240  heater_bed: target=0 temp=78.9 pwm=0.000 sysload=0.45 cputime=1.404 memavail=3583924 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84532.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6990 bytes_read=15465 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999238  heater_bed: target=0 temp=78.9 pwm=0.000 sysload=0.45 cputime=1.431 memavail=3584876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84533.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6996 bytes_read=15609 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999235  heater_bed: target=0 temp=78.8 pwm=0.000 sysload=0.45 cputime=1.454 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84534.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7002 bytes_read=15775 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999232  heater_bed: target=0 temp=78.8 pwm=0.000 sysload=0.45 cputime=1.480 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84535.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7008 bytes_read=15956 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999230  heater_bed: target=0 temp=78.8 pwm=0.000 sysload=0.42 cputime=1.508 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84536.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7014 bytes_read=16121 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999229  heater_bed: target=0 temp=78.7 pwm=0.000 sysload=0.42 cputime=1.536 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84537.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7020 bytes_read=16287 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999230  heater_bed: target=0 temp=78.7 pwm=0.000 sysload=0.42 cputime=1.564 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84538.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7026 bytes_read=16468 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999232  heater_bed: target=0 temp=78.7 pwm=0.000 sysload=0.42 cputime=1.592 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84539.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7032 bytes_read=16619 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999233  heater_bed: target=0 temp=78.6 pwm=0.000 sysload=0.42 cputime=1.620 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84540.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7038 bytes_read=16785 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999237  heater_bed: target=0 temp=78.6 pwm=0.000 sysload=0.42 cputime=1.646 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84541.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7044 bytes_read=16980 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999246  heater_bed: target=0 temp=78.5 pwm=0.000 sysload=0.38 cputime=1.674 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 84542.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7050 bytes_read=17131 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999245  heater_bed: target=0 temp=78.5 pwm=0.000 sysload=0.38 cputime=1.702 memavail=3584456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84543.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7056 bytes_read=17297 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999262  heater_bed: target=0 temp=78.5 pwm=0.000 sysload=0.38 cputime=1.727 memavail=3584456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84544.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7110 bytes_read=17488 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999257  heater_bed: target=0 temp=78.4 pwm=0.000 sysload=0.38 cputime=1.755 memavail=3584456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84545.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7116 bytes_read=17639 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999252  heater_bed: target=0 temp=78.4 pwm=0.000 sysload=0.38 cputime=1.779 memavail=3584456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84546.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=7122 bytes_read=17819 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999249  heater_bed: target=0 temp=78.3 pwm=0.000 sysload=0.35 cputime=1.804 memavail=3584456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84547.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=7598 bytes_read=18050 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999246  heater_bed: target=0 temp=78.3 pwm=0.000 sysload=0.35 cputime=1.845 memavail=3584464 print_time=2663.846 buffer_time=0.115 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 3044712816: Disconnected
Restarting printer
Start printer at Sun Sep 18 07:44:02 2022 (1663508642.4 84548.5)
===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 46.930
pid_ki = 0.398
pid_kd = 1385.024

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 80
target_temp = 35.0
control = watermark
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
description = Set the chamber target temperature.
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
webhooks client 3021507880: New connection
webhooks client 3021507880: Client info {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
Loaded MCU 'mcu' 105 commands (v0.10.0-563-g354915d2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 15.0)    | (40.0, 40.0)
  1   | (107.5, 15.0)   | (107.5, 40.0)
  2   | (175.0, 15.0)   | (175.0, 40.0)
  3   | (242.5, 15.0)   | (242.5, 40.0)
  4   | (310.0, 15.0)   | (310.0, 40.0)
  5   | (310.0, 82.5)   | (310.0, 107.5)
  6   | (242.5, 82.5)   | (242.5, 107.5)
  7   | (175.0, 82.5)   | (175.0, 107.5)
  8   | (107.5, 82.5)   | (107.5, 107.5)
  9   | (40.0, 82.5)    | (40.0, 107.5)
  10  | (40.0, 150.0)   | (40.0, 175.0)
  11  | (107.5, 150.0)  | (107.5, 175.0)
  12  | (175.0, 150.0)  | (175.0, 175.0)
  13  | (242.5, 150.0)  | (242.5, 175.0)
  14  | (310.0, 150.0)  | (310.0, 175.0)
  15  | (310.0, 217.5)  | (310.0, 242.5)
  16  | (242.5, 217.5)  | (242.5, 242.5)
  17  | (175.0, 217.5)  | (175.0, 242.5)
  18  | (107.5, 217.5)  | (107.5, 242.5)
  19  | (40.0, 217.5)   | (40.0, 242.5)
  20  | (40.0, 285.0)   | (40.0, 310.0)
  21  | (107.5, 285.0)  | (107.5, 310.0)
  22  | (175.0, 285.0)  | (175.0, 310.0)
  23  | (242.5, 285.0)  | (242.5, 310.0)
  24  | (310.0, 285.0)  | (310.0, 310.0)
bed_mesh: relative_reference_index 12 is (175.00, 175.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Write g-code response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/gcode.py", line 446, in _respond_raw
    os.write(self.fd, (msg+"\n").encode())
OSError: [Errno 11] Resource temporarily unavailable
Stats 84551.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3389 bytes_read=6533 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3022 freq=179994301  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.41 cputime=0.000 memavail=3584416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 3021507880
webhooks: registering remote method 'reboot_machine' for connection id: 3021507880
webhooks: registering remote method 'pause_job_queue' for connection id: 3021507880
webhooks: registering remote method 'start_job_queue' for connection id: 3021507880
webhooks: registering remote method 'timelapse_newframe' for connection id: 3021507880
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 3021507880
webhooks: registering remote method 'timelapse_render' for connection id: 3021507880
Stats 84552.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6715 bytes_read=6944 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179997645  heater_bed: target=0 temp=78.1 pwm=0.000 sysload=0.41 cputime=0.057 memavail=3584068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84553.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6925 bytes_read=7120 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999987  heater_bed: target=0 temp=78.1 pwm=0.000 sysload=0.41 cputime=0.104 memavail=3583888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84554.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6931 bytes_read=7318 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000019  heater_bed: target=0 temp=78.0 pwm=0.000 sysload=0.41 cputime=0.129 memavail=3584016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84555.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6937 bytes_read=7484 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000339  heater_bed: target=0 temp=78.0 pwm=0.000 sysload=0.37 cputime=0.155 memavail=3584016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84556.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6943 bytes_read=7635 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000131  heater_bed: target=0 temp=77.9 pwm=0.000 sysload=0.37 cputime=0.180 memavail=3584020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84557.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6949 bytes_read=7816 bytes_retransmit=9 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999991  heater_bed: target=0 temp=77.9 pwm=0.000 sysload=0.37 cputime=0.206 memavail=3584032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84558.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6955 bytes_read=7982 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999909  heater_bed: target=0 temp=77.9 pwm=0.000 sysload=0.37 cputime=0.231 memavail=3584040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84559.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6961 bytes_read=8147 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000186  heater_bed: target=0 temp=77.8 pwm=0.000 sysload=0.37 cputime=0.257 memavail=3584040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84560.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6967 bytes_read=8328 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999989  heater_bed: target=0 temp=77.8 pwm=0.000 sysload=0.34 cputime=0.282 memavail=3584052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84561.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6989 bytes_read=8499 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999865  heater_bed: target=0 temp=77.7 pwm=0.000 sysload=0.34 cputime=0.311 memavail=3584180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84562.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6995 bytes_read=8650 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999775  heater_bed: target=0 temp=77.7 pwm=0.000 sysload=0.34 cputime=0.336 memavail=3584232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84563.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7001 bytes_read=8831 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999692  heater_bed: target=0 temp=77.6 pwm=0.000 sysload=0.34 cputime=0.362 memavail=3584232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84564.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7007 bytes_read=9011 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999647  heater_bed: target=0 temp=77.6 pwm=0.000 sysload=0.34 cputime=0.387 memavail=3584196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84565.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7013 bytes_read=9162 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999605  heater_bed: target=0 temp=77.6 pwm=0.000 sysload=0.31 cputime=0.412 memavail=3584156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84566.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7019 bytes_read=9343 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999585  heater_bed: target=0 temp=77.5 pwm=0.000 sysload=0.31 cputime=0.439 memavail=3584044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84567.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7025 bytes_read=9509 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999558  heater_bed: target=0 temp=77.5 pwm=0.000 sysload=0.31 cputime=0.465 memavail=3583888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84568.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7085 bytes_read=9670 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999542  heater_bed: target=0 temp=77.4 pwm=0.000 sysload=0.31 cputime=0.492 memavail=3583828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84569.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7091 bytes_read=9866 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999505  heater_bed: target=0 temp=77.4 pwm=0.000 sysload=0.31 cputime=0.517 memavail=3583708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84570.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7097 bytes_read=10032 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999536  heater_bed: target=0 temp=77.4 pwm=0.000 sysload=0.29 cputime=0.542 memavail=3583736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 84571.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7111 bytes_read=10183 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999545  heater_bed: target=0 temp=77.3 pwm=0.000 sysload=0.29 cputime=0.570 memavail=3583656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84572.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7117 bytes_read=10358 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999535  heater_bed: target=0 temp=77.3 pwm=0.000 sysload=0.29 cputime=0.596 memavail=3583688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84573.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7123 bytes_read=10514 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=77.3 pwm=0.000 sysload=0.29 cputime=0.621 memavail=3583572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84574.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7129 bytes_read=10678 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999491  heater_bed: target=0 temp=77.2 pwm=0.000 sysload=0.29 cputime=0.647 memavail=3583524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84575.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7135 bytes_read=10859 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999478  heater_bed: target=0 temp=77.1 pwm=0.000 sysload=0.35 cputime=0.673 memavail=3583428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84576.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7141 bytes_read=11025 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=77.1 pwm=0.000 sysload=0.35 cputime=0.699 memavail=3583472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84577.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7147 bytes_read=11176 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999450  heater_bed: target=0 temp=77.1 pwm=0.000 sysload=0.35 cputime=0.723 memavail=3583384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84578.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7153 bytes_read=11357 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999432  heater_bed: target=0 temp=77.0 pwm=0.000 sysload=0.35 cputime=0.748 memavail=3583112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84579.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7159 bytes_read=11537 bytes_retransmit=9 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999425  heater_bed: target=0 temp=77.0 pwm=0.000 sysload=0.35 cputime=0.774 memavail=3583092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84580.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7165 bytes_read=11688 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=77.0 pwm=0.000 sysload=0.32 cputime=0.799 memavail=3583000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84581.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7171 bytes_read=11869 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=0 temp=76.9 pwm=0.000 sysload=0.32 cputime=0.824 memavail=3583072 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84582.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7177 bytes_read=12035 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999407  heater_bed: target=0 temp=76.9 pwm=0.000 sysload=0.32 cputime=0.849 memavail=3583104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84583.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7189 bytes_read=12202 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999400  heater_bed: target=0 temp=76.9 pwm=0.000 sysload=0.32 cputime=0.875 memavail=3582952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84584.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7195 bytes_read=12397 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999399  heater_bed: target=0 temp=76.8 pwm=0.000 sysload=0.32 cputime=0.900 memavail=3582916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 84585.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7201 bytes_read=12563 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999392  heater_bed: target=0 temp=76.8 pwm=0.000 sysload=0.29 cputime=0.926 memavail=3582816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84586.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7207 bytes_read=12714 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999389  heater_bed: target=0 temp=76.7 pwm=0.000 sysload=0.29 cputime=0.951 memavail=3582944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84587.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7213 bytes_read=12895 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999403  heater_bed: target=0 temp=76.7 pwm=0.000 sysload=0.29 cputime=0.977 memavail=3582964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84588.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7219 bytes_read=13061 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999392  heater_bed: target=0 temp=76.7 pwm=0.000 sysload=0.29 cputime=1.004 memavail=3582964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84589.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7279 bytes_read=13237 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999387  heater_bed: target=0 temp=76.6 pwm=0.000 sysload=0.29 cputime=1.032 memavail=3582964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84590.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7285 bytes_read=13418 bytes_retransmit=9 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999416  heater_bed: target=0 temp=76.6 pwm=0.000 sysload=0.35 cputime=1.060 memavail=3582844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84591.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7291 bytes_read=13584 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999408  heater_bed: target=0 temp=76.5 pwm=0.000 sysload=0.35 cputime=1.086 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84592.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7297 bytes_read=13735 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999411  heater_bed: target=0 temp=76.5 pwm=0.000 sysload=0.35 cputime=1.112 memavail=3582776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84593.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7357 bytes_read=13926 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999425  heater_bed: target=0 temp=76.4 pwm=0.000 sysload=0.35 cputime=1.141 memavail=3582740 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84594.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7363 bytes_read=14107 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999423  heater_bed: target=0 temp=76.4 pwm=0.000 sysload=0.35 cputime=1.169 memavail=3582840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84595.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7369 bytes_read=14258 bytes_retransmit=9 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999410  heater_bed: target=0 temp=76.4 pwm=0.000 sysload=0.40 cputime=1.195 memavail=3582744 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84596.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7375 bytes_read=14429 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999403  heater_bed: target=0 temp=76.3 pwm=0.000 sysload=0.40 cputime=1.223 memavail=3582600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84597.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7381 bytes_read=14587 bytes_retransmit=9 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999396  heater_bed: target=0 temp=76.3 pwm=0.000 sysload=0.40 cputime=1.250 memavail=3582608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84598.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=7387 bytes_read=14753 bytes_retransmit=9 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999393  heater_bed: target=0 temp=76.3 pwm=0.000 sysload=0.40 cputime=1.276 memavail=3582552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84599.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7393 bytes_read=14933 bytes_retransmit=9 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999389  heater_bed: target=0 temp=76.2 pwm=0.000 sysload=0.40 cputime=1.303 memavail=3582512 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84600.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7399 bytes_read=15099 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=76.2 pwm=0.000 sysload=0.37 cputime=1.329 memavail=3582488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84601.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7405 bytes_read=15265 bytes_retransmit=9 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999376  heater_bed: target=0 temp=76.1 pwm=0.000 sysload=0.37 cputime=1.354 memavail=3582572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84602.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7411 bytes_read=15431 bytes_retransmit=9 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999364  heater_bed: target=0 temp=76.1 pwm=0.000 sysload=0.37 cputime=1.378 memavail=3582592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84603.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7417 bytes_read=15597 bytes_retransmit=9 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999364  heater_bed: target=0 temp=76.0 pwm=0.000 sysload=0.37 cputime=1.404 memavail=3582568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84604.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7423 bytes_read=15777 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999363  heater_bed: target=0 temp=76.0 pwm=0.000 sysload=0.37 cputime=1.427 memavail=3582580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84605.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7429 bytes_read=15943 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999360  heater_bed: target=0 temp=76.0 pwm=0.000 sysload=0.50 cputime=1.451 memavail=3582604 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84606.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7435 bytes_read=16109 bytes_retransmit=9 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999359  heater_bed: target=0 temp=76.0 pwm=0.000 sysload=0.50 cputime=1.477 memavail=3582604 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84607.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7441 bytes_read=16275 bytes_retransmit=9 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999354  heater_bed: target=0 temp=75.9 pwm=0.000 sysload=0.50 cputime=1.501 memavail=3582612 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84608.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7447 bytes_read=16441 bytes_retransmit=9 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999350  heater_bed: target=0 temp=75.9 pwm=0.000 sysload=0.50 cputime=1.525 memavail=3582572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84609.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7453 bytes_read=16621 bytes_retransmit=9 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999348  heater_bed: target=0 temp=75.8 pwm=0.000 sysload=0.50 cputime=1.550 memavail=3582732 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84610.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7459 bytes_read=16787 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999351  heater_bed: target=0 temp=75.8 pwm=0.000 sysload=0.46 cputime=1.575 memavail=3582504 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84611.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7465 bytes_read=16953 bytes_retransmit=9 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999350  heater_bed: target=0 temp=75.7 pwm=0.000 sysload=0.46 cputime=1.602 memavail=3582468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84612.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7471 bytes_read=17119 bytes_retransmit=9 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999348  heater_bed: target=0 temp=75.7 pwm=0.000 sysload=0.46 cputime=1.626 memavail=3582588 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 84613.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7477 bytes_read=17285 bytes_retransmit=9 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999366  heater_bed: target=0 temp=75.7 pwm=0.000 sysload=0.46 cputime=1.654 memavail=3582632 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84614.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7483 bytes_read=17465 bytes_retransmit=9 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999363  heater_bed: target=0 temp=75.6 pwm=0.000 sysload=0.46 cputime=1.679 memavail=3582820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84615.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7489 bytes_read=17631 bytes_retransmit=9 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999368  heater_bed: target=0 temp=75.6 pwm=0.000 sysload=0.42 cputime=1.704 memavail=3582820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84616.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7495 bytes_read=17797 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999364  heater_bed: target=0 temp=75.5 pwm=0.000 sysload=0.42 cputime=1.729 memavail=3582792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84617.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7501 bytes_read=17963 bytes_retransmit=9 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999361  heater_bed: target=0 temp=75.5 pwm=0.000 sysload=0.42 cputime=1.754 memavail=3582768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84618.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7507 bytes_read=18129 bytes_retransmit=9 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999362  heater_bed: target=0 temp=75.4 pwm=0.000 sysload=0.42 cputime=1.782 memavail=3582816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84619.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=7562 bytes_read=18320 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999363  heater_bed: target=0 temp=75.4 pwm=0.000 sysload=0.42 cputime=1.809 memavail=3582760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84620.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=7568 bytes_read=18477 bytes_retransmit=9 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999362  heater_bed: target=0 temp=75.4 pwm=0.000 sysload=0.39 cputime=1.835 memavail=3582828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84621.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=7574 bytes_read=18636 bytes_retransmit=9 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999359  heater_bed: target=0 temp=75.4 pwm=0.000 sysload=0.39 cputime=1.860 memavail=3582812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84622.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=7580 bytes_read=18802 bytes_retransmit=9 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999358  heater_bed: target=0 temp=75.3 pwm=0.000 sysload=0.39 cputime=1.885 memavail=3582932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84623.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=7586 bytes_read=18968 bytes_retransmit=9 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999356  heater_bed: target=0 temp=75.3 pwm=0.000 sysload=0.39 cputime=1.911 memavail=3582844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 84624.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7592 bytes_read=19148 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999355  heater_bed: target=0 temp=75.2 pwm=0.000 sysload=0.39 cputime=1.937 memavail=3582656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84625.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7598 bytes_read=19314 bytes_retransmit=9 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999359  heater_bed: target=0 temp=75.2 pwm=0.000 sysload=0.36 cputime=1.961 memavail=3582636 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84626.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7604 bytes_read=19480 bytes_retransmit=9 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999358  heater_bed: target=0 temp=75.2 pwm=0.000 sysload=0.36 cputime=1.988 memavail=3582676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84627.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7610 bytes_read=19646 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999415  heater_bed: target=0 temp=75.1 pwm=0.000 sysload=0.36 cputime=2.015 memavail=3582680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84628.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7616 bytes_read=19812 bytes_retransmit=9 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999410  heater_bed: target=0 temp=75.1 pwm=0.000 sysload=0.36 cputime=2.042 memavail=3582712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84629.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7622 bytes_read=19992 bytes_retransmit=9 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999408  heater_bed: target=0 temp=75.1 pwm=0.000 sysload=0.36 cputime=2.068 memavail=3582596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84630.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7628 bytes_read=20158 bytes_retransmit=9 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999405  heater_bed: target=0 temp=75.0 pwm=0.000 sysload=0.33 cputime=2.093 memavail=3582700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84631.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7634 bytes_read=20324 bytes_retransmit=9 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999397  heater_bed: target=0 temp=75.0 pwm=0.000 sysload=0.33 cputime=2.118 memavail=3582688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84632.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7640 bytes_read=20490 bytes_retransmit=9 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999392  heater_bed: target=0 temp=74.9 pwm=0.000 sysload=0.33 cputime=2.145 memavail=3582684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84633.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7646 bytes_read=20656 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999403  heater_bed: target=0 temp=74.9 pwm=0.000 sysload=0.33 cputime=2.170 memavail=3582712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84634.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7652 bytes_read=20836 bytes_retransmit=9 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999398  heater_bed: target=0 temp=74.9 pwm=0.000 sysload=0.33 cputime=2.197 memavail=3582716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84635.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7658 bytes_read=21002 bytes_retransmit=9 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999394  heater_bed: target=0 temp=74.8 pwm=0.000 sysload=0.30 cputime=2.223 memavail=3582932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84636.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7664 bytes_read=21168 bytes_retransmit=9 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999391  heater_bed: target=0 temp=74.8 pwm=0.000 sysload=0.30 cputime=2.249 memavail=3583016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84637.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7670 bytes_read=21334 bytes_retransmit=9 bytes_invalid=0 send_seq=447 receive_seq=447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999390  heater_bed: target=0 temp=74.7 pwm=0.000 sysload=0.30 cputime=2.274 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84638.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7676 bytes_read=21500 bytes_retransmit=9 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999388  heater_bed: target=0 temp=74.7 pwm=0.000 sysload=0.30 cputime=2.300 memavail=3582724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84639.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7682 bytes_read=21680 bytes_retransmit=9 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999390  heater_bed: target=0 temp=74.7 pwm=0.000 sysload=0.30 cputime=2.326 memavail=3582880 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84640.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7688 bytes_read=21846 bytes_retransmit=9 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999386  heater_bed: target=0 temp=74.6 pwm=0.000 sysload=0.28 cputime=2.352 memavail=3582820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84641.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7694 bytes_read=22012 bytes_retransmit=9 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999384  heater_bed: target=0 temp=74.6 pwm=0.000 sysload=0.28 cputime=2.378 memavail=3582852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84642.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7700 bytes_read=22178 bytes_retransmit=9 bytes_invalid=0 send_seq=452 receive_seq=452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=74.6 pwm=0.000 sysload=0.28 cputime=2.404 memavail=3582360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84643.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7706 bytes_read=22344 bytes_retransmit=9 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999381  heater_bed: target=0 temp=74.5 pwm=0.000 sysload=0.28 cputime=2.430 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84644.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7718 bytes_read=22529 bytes_retransmit=9 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=74.5 pwm=0.000 sysload=0.28 cputime=2.456 memavail=3582300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84645.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7778 bytes_read=22701 bytes_retransmit=9 bytes_invalid=0 send_seq=458 receive_seq=458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999376  heater_bed: target=0 temp=74.4 pwm=0.000 sysload=0.26 cputime=2.482 memavail=3582456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84646.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7784 bytes_read=22867 bytes_retransmit=9 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=74.4 pwm=0.000 sysload=0.26 cputime=2.508 memavail=3582496 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84647.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7790 bytes_read=23033 bytes_retransmit=9 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999375  heater_bed: target=0 temp=74.4 pwm=0.000 sysload=0.26 cputime=2.533 memavail=3582344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 84648.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7796 bytes_read=23199 bytes_retransmit=9 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999372  heater_bed: target=0 temp=74.3 pwm=0.000 sysload=0.26 cputime=2.558 memavail=3582448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84649.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7802 bytes_read=23380 bytes_retransmit=9 bytes_invalid=0 send_seq=462 receive_seq=462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999369  heater_bed: target=0 temp=74.3 pwm=0.000 sysload=0.26 cputime=2.583 memavail=3582464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84650.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7808 bytes_read=23546 bytes_retransmit=9 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999367  heater_bed: target=0 temp=74.3 pwm=0.000 sysload=0.23 cputime=2.608 memavail=3582216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84651.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7814 bytes_read=23712 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999369  heater_bed: target=0 temp=74.2 pwm=0.000 sysload=0.23 cputime=2.634 memavail=3582308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84652.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7820 bytes_read=23878 bytes_retransmit=9 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999377  heater_bed: target=0 temp=74.2 pwm=0.000 sysload=0.23 cputime=2.658 memavail=3581044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84653.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7826 bytes_read=24044 bytes_retransmit=9 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999374  heater_bed: target=0 temp=74.1 pwm=0.000 sysload=0.23 cputime=2.683 memavail=3581036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84654.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7832 bytes_read=24224 bytes_retransmit=9 bytes_invalid=0 send_seq=467 receive_seq=467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999375  heater_bed: target=0 temp=74.1 pwm=0.000 sysload=0.23 cputime=2.707 memavail=3581144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84655.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7838 bytes_read=24390 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999372  heater_bed: target=0 temp=74.1 pwm=0.000 sysload=0.22 cputime=2.732 memavail=3581128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84656.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7844 bytes_read=24571 bytes_retransmit=9 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999371  heater_bed: target=0 temp=74.0 pwm=0.000 sysload=0.22 cputime=2.758 memavail=3581220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84657.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7850 bytes_read=24722 bytes_retransmit=9 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999369  heater_bed: target=0 temp=74.0 pwm=0.000 sysload=0.22 cputime=2.783 memavail=3581100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84658.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7856 bytes_read=24888 bytes_retransmit=9 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=74.0 pwm=0.000 sysload=0.22 cputime=2.808 memavail=3581192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84659.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7862 bytes_read=25083 bytes_retransmit=9 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999377  heater_bed: target=0 temp=73.9 pwm=0.000 sysload=0.22 cputime=2.834 memavail=3581196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84660.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7868 bytes_read=25234 bytes_retransmit=9 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999386  heater_bed: target=0 temp=73.9 pwm=0.000 sysload=0.28 cputime=2.860 memavail=3581048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84661.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7874 bytes_read=25400 bytes_retransmit=9 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999383  heater_bed: target=0 temp=73.8 pwm=0.000 sysload=0.28 cputime=2.886 memavail=3581112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84662.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7880 bytes_read=25581 bytes_retransmit=9 bytes_invalid=0 send_seq=475 receive_seq=475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=73.8 pwm=0.000 sysload=0.28 cputime=2.913 memavail=3580900 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84663.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7886 bytes_read=25732 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=73.8 pwm=0.000 sysload=0.28 cputime=2.940 memavail=3580776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84664.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7892 bytes_read=25912 bytes_retransmit=9 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=73.7 pwm=0.000 sysload=0.28 cputime=2.968 memavail=3580720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84665.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7947 bytes_read=26103 bytes_retransmit=9 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=73.7 pwm=0.000 sysload=0.26 cputime=2.996 memavail=3580692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84666.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8002 bytes_read=26264 bytes_retransmit=9 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999382  heater_bed: target=0 temp=73.7 pwm=0.000 sysload=0.26 cputime=3.025 memavail=3580656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84667.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8008 bytes_read=26429 bytes_retransmit=9 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999382  heater_bed: target=0 temp=73.6 pwm=0.000 sysload=0.26 cputime=3.050 memavail=3580884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84668.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8014 bytes_read=26598 bytes_retransmit=9 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=73.6 pwm=0.000 sysload=0.26 cputime=3.075 memavail=3580760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84669.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=8020 bytes_read=26760 bytes_retransmit=9 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=73.5 pwm=0.000 sysload=0.26 cputime=3.102 memavail=3580864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84670.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=8026 bytes_read=26926 bytes_retransmit=9 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=73.5 pwm=0.000 sysload=0.24 cputime=3.127 memavail=3580840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84671.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=8032 bytes_read=27107 bytes_retransmit=9 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999377  heater_bed: target=0 temp=73.5 pwm=0.000 sysload=0.24 cputime=3.155 memavail=3580796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84672.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=8092 bytes_read=27268 bytes_retransmit=9 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999386  heater_bed: target=0 temp=73.4 pwm=0.000 sysload=0.24 cputime=3.182 memavail=3580876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84673.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=8098 bytes_read=27434 bytes_retransmit=9 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999384  heater_bed: target=0 temp=73.4 pwm=0.000 sysload=0.24 cputime=3.209 memavail=3580756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84674.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8104 bytes_read=27630 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999382  heater_bed: target=0 temp=73.4 pwm=0.000 sysload=0.24 cputime=3.236 memavail=3580764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84675.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8110 bytes_read=27781 bytes_retransmit=9 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999382  heater_bed: target=0 temp=73.3 pwm=0.000 sysload=0.22 cputime=3.261 memavail=3580868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84676.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8116 bytes_read=27947 bytes_retransmit=9 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999381  heater_bed: target=0 temp=73.3 pwm=0.000 sysload=0.22 cputime=3.287 memavail=3580880 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84677.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8122 bytes_read=28128 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=73.3 pwm=0.000 sysload=0.22 cputime=3.313 memavail=3580856 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84678.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8128 bytes_read=28279 bytes_retransmit=9 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=73.2 pwm=0.000 sysload=0.22 cputime=3.338 memavail=3580792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84679.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8134 bytes_read=28459 bytes_retransmit=9 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=73.2 pwm=0.000 sysload=0.22 cputime=3.364 memavail=3580768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84680.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8140 bytes_read=28640 bytes_retransmit=9 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=73.1 pwm=0.000 sysload=0.28 cputime=3.390 memavail=3580648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84681.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8146 bytes_read=28791 bytes_retransmit=9 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=73.1 pwm=0.000 sysload=0.28 cputime=3.415 memavail=3580592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84682.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8201 bytes_read=28982 bytes_retransmit=9 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=73.1 pwm=0.000 sysload=0.28 cputime=3.443 memavail=3580020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84683.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8256 bytes_read=29158 bytes_retransmit=9 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=73.0 pwm=0.000 sysload=0.28 cputime=3.471 memavail=3580364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84684.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8262 bytes_read=29324 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=73.0 pwm=0.000 sysload=0.28 cputime=3.497 memavail=3580144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84685.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8268 bytes_read=29505 bytes_retransmit=9 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=73.0 pwm=0.000 sysload=0.26 cputime=3.524 memavail=3579992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84686.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8372 bytes_read=29691 bytes_retransmit=9 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=72.9 pwm=0.000 sysload=0.26 cputime=3.552 memavail=3580072 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84687.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8378 bytes_read=29842 bytes_retransmit=9 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=72.9 pwm=0.000 sysload=0.26 cputime=3.578 memavail=3580164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84688.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8384 bytes_read=30023 bytes_retransmit=9 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.8 pwm=0.000 sysload=0.26 cputime=3.603 memavail=3579960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84689.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8390 bytes_read=30204 bytes_retransmit=9 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.8 pwm=0.000 sysload=0.26 cputime=3.629 memavail=3580172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84690.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8396 bytes_read=30355 bytes_retransmit=9 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.8 pwm=0.000 sysload=0.24 cputime=3.653 memavail=3580144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84691.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8402 bytes_read=30532 bytes_retransmit=9 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.8 pwm=0.000 sysload=0.24 cputime=3.679 memavail=3580168 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84692.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8408 bytes_read=30687 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.7 pwm=0.000 sysload=0.24 cputime=3.704 memavail=3579844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84693.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8414 bytes_read=30836 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.7 pwm=0.000 sysload=0.24 cputime=3.728 memavail=3579868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84694.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8420 bytes_read=31031 bytes_retransmit=9 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=72.6 pwm=0.000 sysload=0.24 cputime=3.755 memavail=3579736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84695.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8426 bytes_read=31197 bytes_retransmit=9 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=72.6 pwm=0.000 sysload=0.22 cputime=3.781 memavail=3579716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84696.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8432 bytes_read=31348 bytes_retransmit=9 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.6 pwm=0.000 sysload=0.22 cputime=3.805 memavail=3579804 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84697.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8438 bytes_read=31529 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.5 pwm=0.000 sysload=0.22 cputime=3.831 memavail=3579780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84698.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8493 bytes_read=31705 bytes_retransmit=9 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=72.5 pwm=0.000 sysload=0.22 cputime=3.857 memavail=3579868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84699.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8551 bytes_read=31881 bytes_retransmit=9 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=72.5 pwm=0.000 sysload=0.22 cputime=3.885 memavail=3579744 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84700.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8606 bytes_read=32072 bytes_retransmit=9 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.4 pwm=0.000 sysload=0.20 cputime=3.912 memavail=3579828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84701.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8710 bytes_read=32258 bytes_retransmit=9 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999376  heater_bed: target=0 temp=72.4 pwm=0.000 sysload=0.20 cputime=3.940 memavail=3579852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84702.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8814 bytes_read=32429 bytes_retransmit=9 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999378  heater_bed: target=0 temp=72.3 pwm=0.000 sysload=0.20 cputime=3.968 memavail=3579308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84703.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=8820 bytes_read=32610 bytes_retransmit=9 bytes_invalid=0 send_seq=544 receive_seq=544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999379  heater_bed: target=0 temp=72.3 pwm=0.000 sysload=0.20 cputime=3.994 memavail=3579364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84704.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=8826 bytes_read=32791 bytes_retransmit=9 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999380  heater_bed: target=0 temp=72.3 pwm=0.000 sysload=0.20 cputime=4.020 memavail=3579500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84705.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=8887 bytes_read=32968 bytes_retransmit=9 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999382  heater_bed: target=0 temp=72.2 pwm=0.000 sysload=0.18 cputime=4.047 memavail=3579620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84706.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=8893 bytes_read=33149 bytes_retransmit=9 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999382  heater_bed: target=0 temp=72.2 pwm=0.000 sysload=0.18 cputime=4.075 memavail=3579648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84707.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=8948 bytes_read=33325 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999383  heater_bed: target=0 temp=72.2 pwm=0.000 sysload=0.18 cputime=4.102 memavail=3579440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84708.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=8954 bytes_read=33476 bytes_retransmit=9 bytes_invalid=0 send_seq=554 receive_seq=554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999390  heater_bed: target=0 temp=72.2 pwm=0.000 sysload=0.18 cputime=4.127 memavail=3579508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84709.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=8960 bytes_read=33672 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999390  heater_bed: target=0 temp=72.1 pwm=0.000 sysload=0.18 cputime=4.153 memavail=3579604 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84710.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=9015 bytes_read=33848 bytes_retransmit=9 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999398  heater_bed: target=0 temp=72.1 pwm=0.000 sysload=0.17 cputime=4.180 memavail=3579580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84711.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=9070 bytes_read=34009 bytes_retransmit=9 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999398  heater_bed: target=0 temp=72.0 pwm=0.000 sysload=0.17 cputime=4.207 memavail=3579676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84712.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=9125 bytes_read=34200 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999399  heater_bed: target=0 temp=72.0 pwm=0.000 sysload=0.17 cputime=4.234 memavail=3579592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84713.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=9180 bytes_read=34376 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999398  heater_bed: target=0 temp=72.0 pwm=0.000 sysload=0.17 cputime=4.261 memavail=3579656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84714.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9186 bytes_read=34542 bytes_retransmit=9 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999399  heater_bed: target=0 temp=72.0 pwm=0.000 sysload=0.17 cputime=4.284 memavail=3579544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84715.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9192 bytes_read=34717 bytes_retransmit=9 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999399  heater_bed: target=0 temp=71.9 pwm=0.000 sysload=0.15 cputime=4.310 memavail=3579488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84716.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9247 bytes_read=34882 bytes_retransmit=9 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999397  heater_bed: target=0 temp=71.9 pwm=0.000 sysload=0.15 cputime=4.336 memavail=3579388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84717.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9351 bytes_read=35053 bytes_retransmit=9 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999395  heater_bed: target=0 temp=71.8 pwm=0.000 sysload=0.15 cputime=4.364 memavail=3579456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84718.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9357 bytes_read=35234 bytes_retransmit=9 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999397  heater_bed: target=0 temp=71.8 pwm=0.000 sysload=0.15 cputime=4.390 memavail=3579544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84719.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9412 bytes_read=35425 bytes_retransmit=9 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999399  heater_bed: target=0 temp=71.8 pwm=0.000 sysload=0.15 cputime=4.418 memavail=3579496 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84720.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9516 bytes_read=35596 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999399  heater_bed: target=0 temp=71.7 pwm=0.000 sysload=0.14 cputime=4.446 memavail=3579312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 84721.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9571 bytes_read=35787 bytes_retransmit=9 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999400  heater_bed: target=0 temp=71.7 pwm=0.000 sysload=0.14 cputime=4.473 memavail=3579784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84722.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9626 bytes_read=35963 bytes_retransmit=9 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=0 temp=71.7 pwm=0.000 sysload=0.14 cputime=4.501 memavail=3580220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84723.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=9681 bytes_read=36124 bytes_retransmit=9 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=0 temp=71.7 pwm=0.000 sysload=0.14 cputime=4.528 memavail=3580100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84724.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=9736 bytes_read=36330 bytes_retransmit=9 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999416  heater_bed: target=0 temp=71.6 pwm=0.000 sysload=0.14 cputime=4.556 memavail=3580096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84725.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=9840 bytes_read=36516 bytes_retransmit=9 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=0 temp=71.6 pwm=0.000 sysload=0.13 cputime=4.585 memavail=3580268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84726.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=9944 bytes_read=36687 bytes_retransmit=9 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999416  heater_bed: target=0 temp=71.5 pwm=0.000 sysload=0.13 cputime=4.613 memavail=3580140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84727.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=9999 bytes_read=36878 bytes_retransmit=9 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=0 temp=71.5 pwm=0.000 sysload=0.13 cputime=4.639 memavail=3580084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84728.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=10152 bytes_read=37069 bytes_retransmit=9 bytes_invalid=0 send_seq=617 receive_seq=617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999413  heater_bed: target=0 temp=71.4 pwm=0.000 sysload=0.13 cputime=4.669 memavail=3580072 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84729.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=10207 bytes_read=37245 bytes_retransmit=9 bytes_invalid=0 send_seq=620 receive_seq=620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=0 temp=71.4 pwm=0.000 sysload=0.13 cputime=4.695 memavail=3580024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84730.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=10213 bytes_read=37426 bytes_retransmit=9 bytes_invalid=0 send_seq=621 receive_seq=621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999414  heater_bed: target=0 temp=71.4 pwm=0.000 sysload=0.12 cputime=4.720 memavail=3580196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84731.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=10268 bytes_read=37602 bytes_retransmit=9 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999416  heater_bed: target=0 temp=71.4 pwm=0.000 sysload=0.12 cputime=4.747 memavail=3580096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84732.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=10323 bytes_read=37763 bytes_retransmit=9 bytes_invalid=0 send_seq=627 receive_seq=627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=71.3 pwm=0.000 sysload=0.12 cputime=4.773 memavail=3579896 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84733.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=10378 bytes_read=37954 bytes_retransmit=9 bytes_invalid=0 send_seq=630 receive_seq=630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999424  heater_bed: target=0 temp=71.3 pwm=0.000 sysload=0.12 cputime=4.801 memavail=3579840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84734.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=10482 bytes_read=38155 bytes_retransmit=9 bytes_invalid=0 send_seq=635 receive_seq=635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999424  heater_bed: target=0 temp=71.3 pwm=0.000 sysload=0.12 cputime=4.832 memavail=3579688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84735.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=10586 bytes_read=38326 bytes_retransmit=9 bytes_invalid=0 send_seq=640 receive_seq=640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999423  heater_bed: target=0 temp=71.2 pwm=0.000 sysload=0.11 cputime=4.861 memavail=3579812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84736.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=10690 bytes_read=38527 bytes_retransmit=9 bytes_invalid=0 send_seq=645 receive_seq=645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999421  heater_bed: target=0 temp=71.2 pwm=0.000 sysload=0.11 cputime=4.891 memavail=3579740 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84737.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=10794 bytes_read=38713 bytes_retransmit=9 bytes_invalid=0 send_seq=650 receive_seq=650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999421  heater_bed: target=0 temp=71.1 pwm=0.000 sysload=0.11 cputime=4.919 memavail=3579716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84738.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=10849 bytes_read=38889 bytes_retransmit=9 bytes_invalid=0 send_seq=653 receive_seq=653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=0 temp=71.1 pwm=0.000 sysload=0.11 cputime=4.946 memavail=3579936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84739.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=10953 bytes_read=39083 bytes_retransmit=9 bytes_invalid=0 send_seq=658 receive_seq=658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=71.1 pwm=0.000 sysload=0.11 cputime=4.973 memavail=3579940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84740.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=10959 bytes_read=39240 bytes_retransmit=9 bytes_invalid=0 send_seq=659 receive_seq=659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=71.0 pwm=0.000 sysload=0.10 cputime=4.999 memavail=3579708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84741.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=11014 bytes_read=39416 bytes_retransmit=9 bytes_invalid=0 send_seq=662 receive_seq=662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=71.0 pwm=0.000 sysload=0.10 cputime=5.026 memavail=3579800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84742.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=11118 bytes_read=39602 bytes_retransmit=9 bytes_invalid=0 send_seq=667 receive_seq=667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=70.9 pwm=0.000 sysload=0.10 cputime=5.053 memavail=3578856 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84743.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=11222 bytes_read=39788 bytes_retransmit=9 bytes_invalid=0 send_seq=672 receive_seq=672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=0 temp=70.9 pwm=0.000 sysload=0.10 cputime=5.080 memavail=3578916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84744.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11228 bytes_read=39969 bytes_retransmit=9 bytes_invalid=0 send_seq=673 receive_seq=673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=70.9 pwm=0.000 sysload=0.10 cputime=5.106 memavail=3578788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84745.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11234 bytes_read=40135 bytes_retransmit=9 bytes_invalid=0 send_seq=674 receive_seq=674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=70.8 pwm=0.000 sysload=0.09 cputime=5.129 memavail=3578732 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84746.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11240 bytes_read=40301 bytes_retransmit=9 bytes_invalid=0 send_seq=675 receive_seq=675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=0 temp=70.8 pwm=0.000 sysload=0.09 cputime=5.154 memavail=3578920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84747.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11344 bytes_read=40487 bytes_retransmit=9 bytes_invalid=0 send_seq=680 receive_seq=680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=0 temp=70.8 pwm=0.000 sysload=0.09 cputime=5.182 memavail=3578776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84748.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11399 bytes_read=40663 bytes_retransmit=9 bytes_invalid=0 send_seq=683 receive_seq=683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999417  heater_bed: target=0 temp=70.8 pwm=0.000 sysload=0.09 cputime=5.210 memavail=3578988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84749.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11454 bytes_read=40854 bytes_retransmit=9 bytes_invalid=0 send_seq=686 receive_seq=686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999417  heater_bed: target=0 temp=70.7 pwm=0.000 sysload=0.09 cputime=5.237 memavail=3578904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84750.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11460 bytes_read=41020 bytes_retransmit=9 bytes_invalid=0 send_seq=687 receive_seq=687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999417  heater_bed: target=0 temp=70.7 pwm=0.000 sysload=0.08 cputime=5.268 memavail=3578760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84751.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11515 bytes_read=41196 bytes_retransmit=9 bytes_invalid=0 send_seq=690 receive_seq=690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999418  heater_bed: target=0 temp=70.7 pwm=0.000 sysload=0.08 cputime=5.297 memavail=3578832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84752.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11521 bytes_read=41362 bytes_retransmit=9 bytes_invalid=0 send_seq=691 receive_seq=691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=0 temp=70.6 pwm=0.000 sysload=0.08 cputime=5.322 memavail=3578644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84753.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=11576 bytes_read=41538 bytes_retransmit=9 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=0 temp=70.6 pwm=0.000 sysload=0.08 cputime=5.350 memavail=3578632 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 84754.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=11631 bytes_read=41729 bytes_retransmit=9 bytes_invalid=0 send_seq=697 receive_seq=697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999420  heater_bed: target=0 temp=70.6 pwm=0.000 sysload=0.08 cputime=5.378 memavail=3578840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84755.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=11686 bytes_read=41905 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=70.5 pwm=0.000 sysload=0.08 cputime=5.406 memavail=3578608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84756.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=11692 bytes_read=42071 bytes_retransmit=9 bytes_invalid=0 send_seq=701 receive_seq=701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999419  heater_bed: target=0 temp=70.5 pwm=0.000 sysload=0.08 cputime=5.430 memavail=3578692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84757.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=11752 bytes_read=42247 bytes_retransmit=9 bytes_invalid=0 send_seq=704 receive_seq=704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999421  heater_bed: target=0 temp=70.5 pwm=0.000 sysload=0.08 cputime=5.460 memavail=3578776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84758.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=11758 bytes_read=42413 bytes_retransmit=9 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999422  heater_bed: target=0 temp=70.4 pwm=0.000 sysload=0.08 cputime=5.486 memavail=3578808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84759.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=11764 bytes_read=42594 bytes_retransmit=9 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=70.4 pwm=0.000 sysload=0.08 cputime=5.512 memavail=3578808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84760.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=11770 bytes_read=42760 bytes_retransmit=9 bytes_invalid=0 send_seq=707 receive_seq=707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=70.4 pwm=0.000 sysload=0.07 cputime=5.537 memavail=3578716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84761.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=11776 bytes_read=42926 bytes_retransmit=9 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999435  heater_bed: target=0 temp=70.3 pwm=0.000 sysload=0.07 cputime=5.562 memavail=3578720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84762.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=11782 bytes_read=43092 bytes_retransmit=9 bytes_invalid=0 send_seq=709 receive_seq=709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999435  heater_bed: target=0 temp=70.3 pwm=0.000 sysload=0.07 cputime=5.586 memavail=3579004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84763.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=11788 bytes_read=43250 bytes_retransmit=9 bytes_invalid=0 send_seq=710 receive_seq=710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=70.3 pwm=0.000 sysload=0.07 cputime=5.611 memavail=3579128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 84764.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=11843 bytes_read=43418 bytes_retransmit=9 bytes_invalid=0 send_seq=713 receive_seq=713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=70.2 pwm=0.000 sysload=0.07 cputime=5.639 memavail=3579096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84765.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=11947 bytes_read=43619 bytes_retransmit=9 bytes_invalid=0 send_seq=718 receive_seq=718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=70.2 pwm=0.000 sysload=0.07 cputime=5.668 memavail=3579100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84766.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=12002 bytes_read=43795 bytes_retransmit=9 bytes_invalid=0 send_seq=721 receive_seq=721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=70.2 pwm=0.000 sysload=0.07 cputime=5.695 memavail=3579108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84767.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=12014 bytes_read=43977 bytes_retransmit=9 bytes_invalid=0 send_seq=723 receive_seq=723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999437  heater_bed: target=0 temp=70.1 pwm=0.000 sysload=0.07 cputime=5.722 memavail=3579108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84768.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=12069 bytes_read=44153 bytes_retransmit=9 bytes_invalid=0 send_seq=726 receive_seq=726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=70.1 pwm=0.000 sysload=0.07 cputime=5.748 memavail=3579108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84769.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=12124 bytes_read=44329 bytes_retransmit=9 bytes_invalid=0 send_seq=729 receive_seq=729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999435  heater_bed: target=0 temp=70.1 pwm=0.000 sysload=0.07 cputime=5.774 memavail=3579112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84770.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12179 bytes_read=44520 bytes_retransmit=9 bytes_invalid=0 send_seq=732 receive_seq=732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=70.0 pwm=0.000 sysload=0.07 cputime=5.800 memavail=3579040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84771.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12234 bytes_read=44696 bytes_retransmit=9 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=70.0 pwm=0.000 sysload=0.06 cputime=5.827 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84772.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12240 bytes_read=44862 bytes_retransmit=9 bytes_invalid=0 send_seq=736 receive_seq=736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=70.0 pwm=0.000 sysload=0.06 cputime=5.853 memavail=3578684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84773.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12246 bytes_read=45028 bytes_retransmit=9 bytes_invalid=0 send_seq=737 receive_seq=737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999441  heater_bed: target=0 temp=69.9 pwm=0.000 sysload=0.06 cputime=5.879 memavail=3578684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84774.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=12252 bytes_read=45194 bytes_retransmit=9 bytes_invalid=0 send_seq=738 receive_seq=738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999441  heater_bed: target=0 temp=69.9 pwm=0.000 sysload=0.06 cputime=5.905 memavail=3578696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84775.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=12356 bytes_read=45395 bytes_retransmit=9 bytes_invalid=0 send_seq=743 receive_seq=743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999453  heater_bed: target=0 temp=69.9 pwm=0.000 sysload=0.06 cputime=5.933 memavail=3578700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84776.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=12362 bytes_read=45561 bytes_retransmit=9 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=69.8 pwm=0.000 sysload=0.06 cputime=5.959 memavail=3578708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84777.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=12417 bytes_read=45737 bytes_retransmit=9 bytes_invalid=0 send_seq=747 receive_seq=747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999484  heater_bed: target=0 temp=69.8 pwm=0.000 sysload=0.06 cputime=5.986 memavail=3578712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84778.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=12472 bytes_read=45913 bytes_retransmit=9 bytes_invalid=0 send_seq=750 receive_seq=750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999482  heater_bed: target=0 temp=69.8 pwm=0.000 sysload=0.06 cputime=6.013 memavail=3578712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84779.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=12527 bytes_read=46089 bytes_retransmit=9 bytes_invalid=0 send_seq=753 receive_seq=753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999479  heater_bed: target=0 temp=69.7 pwm=0.000 sysload=0.06 cputime=6.040 memavail=3578724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84780.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12631 bytes_read=46290 bytes_retransmit=9 bytes_invalid=0 send_seq=758 receive_seq=758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999475  heater_bed: target=0 temp=69.7 pwm=0.000 sysload=0.06 cputime=6.069 memavail=3578600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84781.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12686 bytes_read=46466 bytes_retransmit=9 bytes_invalid=0 send_seq=761 receive_seq=761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=69.7 pwm=0.000 sysload=0.05 cputime=6.096 memavail=3578720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84782.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12741 bytes_read=46642 bytes_retransmit=9 bytes_invalid=0 send_seq=764 receive_seq=764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999475  heater_bed: target=0 temp=69.6 pwm=0.000 sysload=0.05 cputime=6.123 memavail=3578428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84783.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12796 bytes_read=46818 bytes_retransmit=9 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=69.6 pwm=0.000 sysload=0.05 cputime=6.150 memavail=3578432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84784.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12900 bytes_read=47004 bytes_retransmit=9 bytes_invalid=0 send_seq=772 receive_seq=772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999471  heater_bed: target=0 temp=69.6 pwm=0.000 sysload=0.05 cputime=6.179 memavail=3578548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84785.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=12906 bytes_read=47185 bytes_retransmit=9 bytes_invalid=0 send_seq=773 receive_seq=773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999470  heater_bed: target=0 temp=69.5 pwm=0.000 sysload=0.05 cputime=6.205 memavail=3578432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84786.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=12961 bytes_read=47361 bytes_retransmit=9 bytes_invalid=0 send_seq=776 receive_seq=776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999470  heater_bed: target=0 temp=69.5 pwm=0.000 sysload=0.13 cputime=6.232 memavail=3578496 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84787.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=13016 bytes_read=47526 bytes_retransmit=9 bytes_invalid=0 send_seq=779 receive_seq=779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999468  heater_bed: target=0 temp=69.5 pwm=0.000 sysload=0.13 cputime=6.259 memavail=3578728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84788.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=13139 bytes_read=47706 bytes_retransmit=9 bytes_invalid=0 send_seq=784 receive_seq=784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=69.5 pwm=0.000 sysload=0.13 cputime=6.288 memavail=3578676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84789.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=13194 bytes_read=47882 bytes_retransmit=9 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=69.4 pwm=0.000 sysload=0.13 cputime=6.315 memavail=3578768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84790.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=13298 bytes_read=48083 bytes_retransmit=9 bytes_invalid=0 send_seq=792 receive_seq=792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=69.3 pwm=0.000 sysload=0.13 cputime=6.345 memavail=3578912 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84791.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=13402 bytes_read=48269 bytes_retransmit=9 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=69.4 pwm=0.000 sysload=0.36 cputime=6.372 memavail=3578924 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84792.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=13457 bytes_read=48445 bytes_retransmit=9 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=69.3 pwm=0.000 sysload=0.36 cputime=6.399 memavail=3578680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84793.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=13463 bytes_read=48611 bytes_retransmit=9 bytes_invalid=0 send_seq=801 receive_seq=801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=69.3 pwm=0.000 sysload=0.36 cputime=6.424 memavail=3578672 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84794.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=13518 bytes_read=48787 bytes_retransmit=9 bytes_invalid=0 send_seq=804 receive_seq=804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999458  heater_bed: target=0 temp=69.2 pwm=0.000 sysload=0.36 cputime=6.450 memavail=3578976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84795.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=13573 bytes_read=48978 bytes_retransmit=9 bytes_invalid=0 send_seq=807 receive_seq=807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=69.2 pwm=0.000 sysload=0.36 cputime=6.477 memavail=3579040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84796.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=13628 bytes_read=49154 bytes_retransmit=9 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999455  heater_bed: target=0 temp=69.2 pwm=0.000 sysload=0.41 cputime=6.505 memavail=3578916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84797.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=13732 bytes_read=49340 bytes_retransmit=9 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=69.2 pwm=0.000 sysload=0.41 cputime=6.533 memavail=3578972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84798.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=13836 bytes_read=49526 bytes_retransmit=9 bytes_invalid=0 send_seq=820 receive_seq=820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=69.1 pwm=0.000 sysload=0.41 cputime=6.562 memavail=3579268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84799.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=13940 bytes_read=49712 bytes_retransmit=9 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=69.1 pwm=0.000 sysload=0.41 cputime=6.592 memavail=3579368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84800.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=14044 bytes_read=49913 bytes_retransmit=9 bytes_invalid=0 send_seq=830 receive_seq=830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999455  heater_bed: target=0 temp=69.0 pwm=0.000 sysload=0.41 cputime=6.621 memavail=3579292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84801.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=14099 bytes_read=50089 bytes_retransmit=9 bytes_invalid=0 send_seq=833 receive_seq=833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=69.0 pwm=0.000 sysload=0.38 cputime=6.650 memavail=3579332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84802.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=14203 bytes_read=50290 bytes_retransmit=9 bytes_invalid=0 send_seq=838 receive_seq=838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=69.0 pwm=0.000 sysload=0.38 cputime=6.679 memavail=3579740 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84803.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=14258 bytes_read=50451 bytes_retransmit=9 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999455  heater_bed: target=0 temp=69.0 pwm=0.000 sysload=0.38 cputime=6.707 memavail=3579616 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84804.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=14313 bytes_read=50627 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=68.9 pwm=0.000 sysload=0.38 cputime=6.737 memavail=3579688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84805.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14368 bytes_read=50833 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999453  heater_bed: target=0 temp=68.9 pwm=0.000 sysload=0.38 cputime=6.765 memavail=3579692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84806.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14374 bytes_read=50984 bytes_retransmit=9 bytes_invalid=0 send_seq=848 receive_seq=848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999452  heater_bed: target=0 temp=68.9 pwm=0.000 sysload=0.35 cputime=6.790 memavail=3579872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84807.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14429 bytes_read=51160 bytes_retransmit=9 bytes_invalid=0 send_seq=851 receive_seq=851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999452  heater_bed: target=0 temp=68.8 pwm=0.000 sysload=0.35 cputime=6.815 memavail=3579872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84808.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14533 bytes_read=51361 bytes_retransmit=9 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999451  heater_bed: target=0 temp=68.8 pwm=0.000 sysload=0.35 cputime=6.845 memavail=3579800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84809.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14588 bytes_read=51522 bytes_retransmit=9 bytes_invalid=0 send_seq=859 receive_seq=859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999451  heater_bed: target=0 temp=68.8 pwm=0.000 sysload=0.35 cputime=6.872 memavail=3579800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84810.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14594 bytes_read=51702 bytes_retransmit=9 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999453  heater_bed: target=0 temp=68.7 pwm=0.000 sysload=0.35 cputime=6.899 memavail=3579932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84811.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14698 bytes_read=51890 bytes_retransmit=9 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999452  heater_bed: target=0 temp=68.7 pwm=0.000 sysload=0.32 cputime=6.929 memavail=3579868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84812.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14802 bytes_read=52057 bytes_retransmit=9 bytes_invalid=0 send_seq=870 receive_seq=870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=68.7 pwm=0.000 sysload=0.32 cputime=6.958 memavail=3579980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84813.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14808 bytes_read=52223 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=68.7 pwm=0.000 sysload=0.32 cputime=6.983 memavail=3579824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84814.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=14814 bytes_read=52404 bytes_retransmit=9 bytes_invalid=0 send_seq=872 receive_seq=872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=68.6 pwm=0.000 sysload=0.32 cputime=7.008 memavail=3579828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84815.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=14918 bytes_read=52590 bytes_retransmit=9 bytes_invalid=0 send_seq=877 receive_seq=877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=68.6 pwm=0.000 sysload=0.32 cputime=7.036 memavail=3579832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84816.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=14924 bytes_read=52756 bytes_retransmit=9 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=68.5 pwm=0.000 sysload=0.29 cputime=7.062 memavail=3579980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 84817.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=14930 bytes_read=52937 bytes_retransmit=9 bytes_invalid=0 send_seq=879 receive_seq=879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=68.5 pwm=0.000 sysload=0.29 cputime=7.087 memavail=3579904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84818.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=14936 bytes_read=53088 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=68.5 pwm=0.000 sysload=0.29 cputime=7.112 memavail=3579908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84819.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15034 bytes_read=53269 bytes_retransmit=9 bytes_invalid=0 send_seq=884 receive_seq=884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=68.5 pwm=0.000 sysload=0.29 cputime=7.140 memavail=3579912 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84820.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=15089 bytes_read=53475 bytes_retransmit=9 bytes_invalid=0 send_seq=887 receive_seq=887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=68.4 pwm=0.000 sysload=0.29 cputime=7.166 memavail=3579916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84821.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=15095 bytes_read=53626 bytes_retransmit=9 bytes_invalid=0 send_seq=888 receive_seq=888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=68.4 pwm=0.000 sysload=0.27 cputime=7.192 memavail=3579804 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84822.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=15101 bytes_read=53792 bytes_retransmit=9 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=68.4 pwm=0.000 sysload=0.27 cputime=7.219 memavail=3579688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84823.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=15107 bytes_read=53973 bytes_retransmit=9 bytes_invalid=0 send_seq=890 receive_seq=890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999458  heater_bed: target=0 temp=68.3 pwm=0.000 sysload=0.27 cputime=7.244 memavail=3579820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84824.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=15113 bytes_read=54124 bytes_retransmit=9 bytes_invalid=0 send_seq=891 receive_seq=891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999457  heater_bed: target=0 temp=68.3 pwm=0.000 sysload=0.27 cputime=7.268 memavail=3579820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84825.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=15119 bytes_read=54305 bytes_retransmit=9 bytes_invalid=0 send_seq=892 receive_seq=892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=68.3 pwm=0.000 sysload=0.27 cputime=7.293 memavail=3579836 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84826.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=15125 bytes_read=54486 bytes_retransmit=9 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999458  heater_bed: target=0 temp=68.2 pwm=0.000 sysload=0.25 cputime=7.318 memavail=3579836 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84827.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=15180 bytes_read=54647 bytes_retransmit=9 bytes_invalid=0 send_seq=896 receive_seq=896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=68.2 pwm=0.000 sysload=0.25 cputime=7.345 memavail=3579852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84828.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=15241 bytes_read=54839 bytes_retransmit=9 bytes_invalid=0 send_seq=900 receive_seq=900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=68.2 pwm=0.000 sysload=0.25 cputime=7.373 memavail=3580012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84829.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=15296 bytes_read=55030 bytes_retransmit=9 bytes_invalid=0 send_seq=903 receive_seq=903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=68.2 pwm=0.000 sysload=0.25 cputime=7.401 memavail=3580012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84830.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15351 bytes_read=55206 bytes_retransmit=9 bytes_invalid=0 send_seq=906 receive_seq=906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=68.1 pwm=0.000 sysload=0.25 cputime=7.428 memavail=3580020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84831.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15406 bytes_read=55382 bytes_retransmit=9 bytes_invalid=0 send_seq=909 receive_seq=909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=68.1 pwm=0.000 sysload=0.23 cputime=7.456 memavail=3579928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84832.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15461 bytes_read=55573 bytes_retransmit=9 bytes_invalid=0 send_seq=912 receive_seq=912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=68.1 pwm=0.000 sysload=0.23 cputime=7.484 memavail=3579572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84833.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15565 bytes_read=55744 bytes_retransmit=9 bytes_invalid=0 send_seq=917 receive_seq=917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=68.0 pwm=0.000 sysload=0.23 cputime=7.514 memavail=3579576 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84834.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15571 bytes_read=55922 bytes_retransmit=9 bytes_invalid=0 send_seq=918 receive_seq=918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=68.0 pwm=0.000 sysload=0.23 cputime=7.539 memavail=3579480 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84835.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15577 bytes_read=56092 bytes_retransmit=9 bytes_invalid=0 send_seq=919 receive_seq=919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=68.0 pwm=0.000 sysload=0.23 cputime=7.564 memavail=3579480 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84836.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15632 bytes_read=56251 bytes_retransmit=9 bytes_invalid=0 send_seq=922 receive_seq=922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=68.0 pwm=0.000 sysload=0.21 cputime=7.591 memavail=3579648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84837.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15687 bytes_read=56442 bytes_retransmit=9 bytes_invalid=0 send_seq=925 receive_seq=925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=67.9 pwm=0.000 sysload=0.21 cputime=7.618 memavail=3579552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84838.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15693 bytes_read=56608 bytes_retransmit=9 bytes_invalid=0 send_seq=926 receive_seq=926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=67.9 pwm=0.000 sysload=0.21 cputime=7.642 memavail=3579552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84839.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15797 bytes_read=56779 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999471  heater_bed: target=0 temp=67.8 pwm=0.000 sysload=0.21 cputime=7.670 memavail=3579708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84840.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15851 bytes_read=56985 bytes_retransmit=9 bytes_invalid=0 send_seq=934 receive_seq=934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=67.8 pwm=0.000 sysload=0.21 cputime=7.697 memavail=3579708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84841.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=15954 bytes_read=57171 bytes_retransmit=9 bytes_invalid=0 send_seq=939 receive_seq=939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=67.8 pwm=0.000 sysload=0.19 cputime=7.725 memavail=3579708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84842.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=16009 bytes_read=57332 bytes_retransmit=9 bytes_invalid=0 send_seq=942 receive_seq=942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999475  heater_bed: target=0 temp=67.8 pwm=0.000 sysload=0.19 cputime=7.752 memavail=3579888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84843.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=16111 bytes_read=57533 bytes_retransmit=9 bytes_invalid=0 send_seq=947 receive_seq=947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=67.7 pwm=0.000 sysload=0.19 cputime=7.780 memavail=3579828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84844.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=16117 bytes_read=57699 bytes_retransmit=9 bytes_invalid=0 send_seq=948 receive_seq=948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=67.7 pwm=0.000 sysload=0.19 cputime=7.806 memavail=3579864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84845.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=16123 bytes_read=57865 bytes_retransmit=9 bytes_invalid=0 send_seq=949 receive_seq=949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=67.7 pwm=0.000 sysload=0.19 cputime=7.833 memavail=3579896 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84846.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=16270 bytes_read=58071 bytes_retransmit=9 bytes_invalid=0 send_seq=955 receive_seq=955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=67.6 pwm=0.000 sysload=0.18 cputime=7.865 memavail=3579904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84847.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=16276 bytes_read=58237 bytes_retransmit=9 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999479  heater_bed: target=0 temp=67.6 pwm=0.000 sysload=0.18 cputime=7.889 memavail=3579908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84848.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=16282 bytes_read=58388 bytes_retransmit=9 bytes_invalid=0 send_seq=957 receive_seq=957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999479  heater_bed: target=0 temp=67.6 pwm=0.000 sysload=0.18 cputime=7.915 memavail=3579912 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 84849.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=16336 bytes_read=58579 bytes_retransmit=9 bytes_invalid=0 send_seq=960 receive_seq=960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999479  heater_bed: target=0 temp=67.5 pwm=0.000 sysload=0.18 cputime=7.942 memavail=3579920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84850.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=16438 bytes_read=58780 bytes_retransmit=9 bytes_invalid=0 send_seq=965 receive_seq=965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999478  heater_bed: target=0 temp=67.5 pwm=0.000 sysload=0.18 cputime=7.975 memavail=3580072 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84851.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=16546 bytes_read=58951 bytes_retransmit=9 bytes_invalid=0 send_seq=970 receive_seq=970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=67.5 pwm=0.000 sysload=0.16 cputime=8.006 memavail=3580004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84852.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=16552 bytes_read=59132 bytes_retransmit=9 bytes_invalid=0 send_seq=971 receive_seq=971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=67.4 pwm=0.000 sysload=0.16 cputime=8.033 memavail=3579540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84853.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=16742 bytes_read=59328 bytes_retransmit=9 bytes_invalid=0 send_seq=978 receive_seq=978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999486  heater_bed: target=0 temp=67.4 pwm=0.000 sysload=0.16 cputime=8.064 memavail=3579540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84854.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=16748 bytes_read=59479 bytes_retransmit=9 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=67.4 pwm=0.000 sysload=0.16 cputime=8.092 memavail=3579540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84855.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=16754 bytes_read=59675 bytes_retransmit=9 bytes_invalid=0 send_seq=980 receive_seq=980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=67.3 pwm=0.000 sysload=0.16 cputime=8.118 memavail=3579664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84856.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=16809 bytes_read=59851 bytes_retransmit=9 bytes_invalid=0 send_seq=983 receive_seq=983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=67.3 pwm=0.000 sysload=0.15 cputime=8.145 memavail=3579712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84857.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=16864 bytes_read=60012 bytes_retransmit=9 bytes_invalid=0 send_seq=986 receive_seq=986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999486  heater_bed: target=0 temp=67.3 pwm=0.000 sysload=0.15 cputime=8.172 memavail=3579920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84858.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=16870 bytes_read=60188 bytes_retransmit=9 bytes_invalid=0 send_seq=987 receive_seq=987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=67.2 pwm=0.000 sysload=0.15 cputime=8.197 memavail=3579920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84859.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=16876 bytes_read=60343 bytes_retransmit=9 bytes_invalid=0 send_seq=988 receive_seq=988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=67.2 pwm=0.000 sysload=0.15 cputime=8.223 memavail=3580084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84860.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=16980 bytes_read=60529 bytes_retransmit=9 bytes_invalid=0 send_seq=993 receive_seq=993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=67.2 pwm=0.000 sysload=0.15 cputime=8.252 memavail=3580084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84861.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=16986 bytes_read=60710 bytes_retransmit=9 bytes_invalid=0 send_seq=994 receive_seq=994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=67.1 pwm=0.000 sysload=0.14 cputime=8.278 memavail=3580136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84862.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=16992 bytes_read=60876 bytes_retransmit=9 bytes_invalid=0 send_seq=995 receive_seq=995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=67.1 pwm=0.000 sysload=0.14 cputime=8.303 memavail=3580220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84863.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=17047 bytes_read=61037 bytes_retransmit=9 bytes_invalid=0 send_seq=998 receive_seq=998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999491  heater_bed: target=0 temp=67.1 pwm=0.000 sysload=0.14 cputime=8.329 memavail=3580380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84864.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=17102 bytes_read=61228 bytes_retransmit=9 bytes_invalid=0 send_seq=1001 receive_seq=1001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999491  heater_bed: target=0 temp=67.1 pwm=0.000 sysload=0.14 cputime=8.356 memavail=3580520 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84865.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=17108 bytes_read=61409 bytes_retransmit=9 bytes_invalid=0 send_seq=1002 receive_seq=1002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999493  heater_bed: target=0 temp=67.1 pwm=0.000 sysload=0.14 cputime=8.381 memavail=3580520 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84866.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=17114 bytes_read=61560 bytes_retransmit=9 bytes_invalid=0 send_seq=1003 receive_seq=1003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=67.0 pwm=0.000 sysload=0.12 cputime=8.405 memavail=3580616 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84867.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=17169 bytes_read=61751 bytes_retransmit=9 bytes_invalid=0 send_seq=1006 receive_seq=1006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=67.0 pwm=0.000 sysload=0.12 cputime=8.432 memavail=3580648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84868.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=17224 bytes_read=61927 bytes_retransmit=9 bytes_invalid=0 send_seq=1009 receive_seq=1009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=67.0 pwm=0.000 sysload=0.12 cputime=8.457 memavail=3580752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84869.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=17230 bytes_read=62078 bytes_retransmit=9 bytes_invalid=0 send_seq=1010 receive_seq=1010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999502  heater_bed: target=0 temp=66.9 pwm=0.000 sysload=0.12 cputime=8.481 memavail=3580816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84870.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=17236 bytes_read=62274 bytes_retransmit=9 bytes_invalid=0 send_seq=1011 receive_seq=1011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=66.9 pwm=0.000 sysload=0.12 cputime=8.507 memavail=3580860 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84871.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=17242 bytes_read=62440 bytes_retransmit=9 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=66.9 pwm=0.000 sysload=0.11 cputime=8.532 memavail=3580736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84872.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=17248 bytes_read=62591 bytes_retransmit=9 bytes_invalid=0 send_seq=1013 receive_seq=1013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=66.8 pwm=0.000 sysload=0.11 cputime=8.556 memavail=3581008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84873.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=17254 bytes_read=62772 bytes_retransmit=9 bytes_invalid=0 send_seq=1014 receive_seq=1014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=66.8 pwm=0.000 sysload=0.11 cputime=8.583 memavail=3581060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84874.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=17260 bytes_read=62938 bytes_retransmit=9 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=66.8 pwm=0.000 sysload=0.11 cputime=8.609 memavail=3581308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84875.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17266 bytes_read=63103 bytes_retransmit=9 bytes_invalid=0 send_seq=1016 receive_seq=1016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=66.7 pwm=0.000 sysload=0.11 cputime=8.634 memavail=3581320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84876.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17370 bytes_read=63304 bytes_retransmit=9 bytes_invalid=0 send_seq=1021 receive_seq=1021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=66.7 pwm=0.000 sysload=0.10 cputime=8.664 memavail=3581368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84877.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17376 bytes_read=63470 bytes_retransmit=9 bytes_invalid=0 send_seq=1022 receive_seq=1022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=66.7 pwm=0.000 sysload=0.10 cputime=8.691 memavail=3581224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84878.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17382 bytes_read=63621 bytes_retransmit=9 bytes_invalid=0 send_seq=1023 receive_seq=1023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=66.7 pwm=0.000 sysload=0.10 cputime=8.717 memavail=3581324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84879.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17388 bytes_read=63802 bytes_retransmit=9 bytes_invalid=0 send_seq=1024 receive_seq=1024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=66.6 pwm=0.000 sysload=0.10 cputime=8.745 memavail=3581380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84880.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=17492 bytes_read=64003 bytes_retransmit=9 bytes_invalid=0 send_seq=1029 receive_seq=1029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=66.6 pwm=0.000 sysload=0.10 cputime=8.775 memavail=3581440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84881.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=17498 bytes_read=64154 bytes_retransmit=9 bytes_invalid=0 send_seq=1030 receive_seq=1030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=66.6 pwm=0.000 sysload=0.18 cputime=8.800 memavail=3581536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84882.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=17602 bytes_read=64349 bytes_retransmit=9 bytes_invalid=0 send_seq=1035 receive_seq=1035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=66.5 pwm=0.000 sysload=0.18 cputime=8.829 memavail=3581784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84883.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=17608 bytes_read=64505 bytes_retransmit=9 bytes_invalid=0 send_seq=1036 receive_seq=1036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=66.5 pwm=0.000 sysload=0.18 cputime=8.856 memavail=3581852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84884.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=17712 bytes_read=64670 bytes_retransmit=9 bytes_invalid=0 send_seq=1040 receive_seq=1040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=66.5 pwm=0.000 sysload=0.18 cputime=8.886 memavail=3581968 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 84885.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=17767 bytes_read=64876 bytes_retransmit=9 bytes_invalid=0 send_seq=1043 receive_seq=1043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999493  heater_bed: target=0 temp=66.5 pwm=0.000 sysload=0.18 cputime=8.914 memavail=3581904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84886.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=17773 bytes_read=65042 bytes_retransmit=9 bytes_invalid=0 send_seq=1044 receive_seq=1044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=66.4 pwm=0.000 sysload=0.16 cputime=8.940 memavail=3581896 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84887.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=17779 bytes_read=65193 bytes_retransmit=9 bytes_invalid=0 send_seq=1045 receive_seq=1045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=66.4 pwm=0.000 sysload=0.16 cputime=8.966 memavail=3581740 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84888.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=17785 bytes_read=65374 bytes_retransmit=9 bytes_invalid=0 send_seq=1046 receive_seq=1046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999494  heater_bed: target=0 temp=66.3 pwm=0.000 sysload=0.16 cputime=8.991 memavail=3581648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84889.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=17791 bytes_read=65540 bytes_retransmit=9 bytes_invalid=0 send_seq=1047 receive_seq=1047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999493  heater_bed: target=0 temp=66.3 pwm=0.000 sysload=0.16 cputime=9.016 memavail=3581648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84890.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17803 bytes_read=65721 bytes_retransmit=9 bytes_invalid=0 send_seq=1049 receive_seq=1049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=66.3 pwm=0.000 sysload=0.16 cputime=9.041 memavail=3581460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84891.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17809 bytes_read=65902 bytes_retransmit=9 bytes_invalid=0 send_seq=1050 receive_seq=1050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999490  heater_bed: target=0 temp=66.3 pwm=0.000 sysload=0.15 cputime=9.066 memavail=3581468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84892.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17815 bytes_read=66068 bytes_retransmit=9 bytes_invalid=0 send_seq=1051 receive_seq=1051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=66.2 pwm=0.000 sysload=0.15 cputime=9.091 memavail=3581584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84893.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17919 bytes_read=66254 bytes_retransmit=9 bytes_invalid=0 send_seq=1056 receive_seq=1056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999490  heater_bed: target=0 temp=66.2 pwm=0.000 sysload=0.15 cputime=9.123 memavail=3581624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84894.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=17925 bytes_read=66420 bytes_retransmit=9 bytes_invalid=0 send_seq=1057 receive_seq=1057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=66.2 pwm=0.000 sysload=0.15 cputime=9.150 memavail=3581736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84895.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=17931 bytes_read=66601 bytes_retransmit=9 bytes_invalid=0 send_seq=1058 receive_seq=1058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=66.2 pwm=0.000 sysload=0.15 cputime=9.179 memavail=3581696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84896.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=17937 bytes_read=66767 bytes_retransmit=9 bytes_invalid=0 send_seq=1059 receive_seq=1059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=66.1 pwm=0.000 sysload=0.14 cputime=9.207 memavail=3581704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84897.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18041 bytes_read=66953 bytes_retransmit=9 bytes_invalid=0 send_seq=1064 receive_seq=1064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=66.1 pwm=0.000 sysload=0.14 cputime=9.237 memavail=3581704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84898.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18047 bytes_read=67119 bytes_retransmit=9 bytes_invalid=0 send_seq=1065 receive_seq=1065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=66.1 pwm=0.000 sysload=0.14 cputime=9.262 memavail=3581744 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84899.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18053 bytes_read=67285 bytes_retransmit=9 bytes_invalid=0 send_seq=1066 receive_seq=1066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999494  heater_bed: target=0 temp=66.0 pwm=0.000 sysload=0.14 cputime=9.289 memavail=3581896 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84900.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18059 bytes_read=67466 bytes_retransmit=9 bytes_invalid=0 send_seq=1067 receive_seq=1067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999494  heater_bed: target=0 temp=66.0 pwm=0.000 sysload=0.14 cputime=9.314 memavail=3581812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84901.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18065 bytes_read=67632 bytes_retransmit=9 bytes_invalid=0 send_seq=1068 receive_seq=1068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=66.0 pwm=0.000 sysload=0.13 cputime=9.340 memavail=3581736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84902.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18071 bytes_read=67798 bytes_retransmit=9 bytes_invalid=0 send_seq=1069 receive_seq=1069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=65.9 pwm=0.000 sysload=0.13 cputime=9.367 memavail=3581692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84903.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18077 bytes_read=67964 bytes_retransmit=9 bytes_invalid=0 send_seq=1070 receive_seq=1070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=65.9 pwm=0.000 sysload=0.13 cputime=9.394 memavail=3581688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84904.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18083 bytes_read=68130 bytes_retransmit=9 bytes_invalid=0 send_seq=1071 receive_seq=1071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=65.9 pwm=0.000 sysload=0.13 cputime=9.420 memavail=3581848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84905.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18089 bytes_read=68310 bytes_retransmit=9 bytes_invalid=0 send_seq=1072 receive_seq=1072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999516  heater_bed: target=0 temp=65.9 pwm=0.000 sysload=0.13 cputime=9.445 memavail=3581936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 84906.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18095 bytes_read=68467 bytes_retransmit=9 bytes_invalid=0 send_seq=1073 receive_seq=1073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=65.8 pwm=0.000 sysload=0.12 cputime=9.472 memavail=3581928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84907.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18101 bytes_read=68625 bytes_retransmit=9 bytes_invalid=0 send_seq=1074 receive_seq=1074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=65.8 pwm=0.000 sysload=0.12 cputime=9.497 memavail=3581992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84908.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18107 bytes_read=68791 bytes_retransmit=9 bytes_invalid=0 send_seq=1075 receive_seq=1075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=65.8 pwm=0.000 sysload=0.12 cputime=9.523 memavail=3582068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84909.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18113 bytes_read=68957 bytes_retransmit=9 bytes_invalid=0 send_seq=1076 receive_seq=1076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999510  heater_bed: target=0 temp=65.7 pwm=0.000 sysload=0.12 cputime=9.548 memavail=3582108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84910.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18119 bytes_read=69137 bytes_retransmit=9 bytes_invalid=0 send_seq=1077 receive_seq=1077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=65.7 pwm=0.000 sysload=0.12 cputime=9.575 memavail=3582020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84911.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18125 bytes_read=69303 bytes_retransmit=9 bytes_invalid=0 send_seq=1078 receive_seq=1078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=65.7 pwm=0.000 sysload=0.27 cputime=9.601 memavail=3582032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84912.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18229 bytes_read=69489 bytes_retransmit=9 bytes_invalid=0 send_seq=1083 receive_seq=1083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999504  heater_bed: target=0 temp=65.7 pwm=0.000 sysload=0.27 cputime=9.628 memavail=3582044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84913.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18235 bytes_read=69655 bytes_retransmit=9 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999504  heater_bed: target=0 temp=65.6 pwm=0.000 sysload=0.27 cputime=9.653 memavail=3582124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84914.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=18241 bytes_read=69821 bytes_retransmit=9 bytes_invalid=0 send_seq=1085 receive_seq=1085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999503  heater_bed: target=0 temp=65.6 pwm=0.000 sysload=0.27 cputime=9.678 memavail=3582252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84915.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=18247 bytes_read=70002 bytes_retransmit=9 bytes_invalid=0 send_seq=1086 receive_seq=1086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=65.6 pwm=0.000 sysload=0.27 cputime=9.704 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84916.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=18253 bytes_read=70168 bytes_retransmit=9 bytes_invalid=0 send_seq=1087 receive_seq=1087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=65.5 pwm=0.000 sysload=0.25 cputime=9.730 memavail=3582224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84917.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=18259 bytes_read=70334 bytes_retransmit=9 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=65.5 pwm=0.000 sysload=0.25 cputime=9.756 memavail=3582328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84918.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=18265 bytes_read=70500 bytes_retransmit=9 bytes_invalid=0 send_seq=1089 receive_seq=1089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=65.4 pwm=0.000 sysload=0.25 cputime=9.783 memavail=3582316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84919.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=18320 bytes_read=70676 bytes_retransmit=9 bytes_invalid=0 send_seq=1092 receive_seq=1092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=65.5 pwm=0.000 sysload=0.25 cputime=9.811 memavail=3582468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84920.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18424 bytes_read=70877 bytes_retransmit=9 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=65.4 pwm=0.000 sysload=0.25 cputime=9.839 memavail=3582420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84921.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18479 bytes_read=71053 bytes_retransmit=9 bytes_invalid=0 send_seq=1100 receive_seq=1100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=65.4 pwm=0.000 sysload=0.23 cputime=9.868 memavail=3582492 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84922.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18534 bytes_read=71229 bytes_retransmit=9 bytes_invalid=0 send_seq=1103 receive_seq=1103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=65.4 pwm=0.000 sysload=0.23 cputime=9.894 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84923.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18638 bytes_read=71415 bytes_retransmit=9 bytes_invalid=0 send_seq=1108 receive_seq=1108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=65.3 pwm=0.000 sysload=0.23 cputime=9.913 memavail=3582304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84924.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=18742 bytes_read=71601 bytes_retransmit=9 bytes_invalid=0 send_seq=1113 receive_seq=1113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=65.3 pwm=0.000 sysload=0.23 cputime=9.941 memavail=3582308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84925.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18748 bytes_read=71782 bytes_retransmit=9 bytes_invalid=0 send_seq=1114 receive_seq=1114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=65.3 pwm=0.000 sysload=0.23 cputime=9.967 memavail=3582348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84926.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18803 bytes_read=71958 bytes_retransmit=9 bytes_invalid=0 send_seq=1117 receive_seq=1117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999506  heater_bed: target=0 temp=65.2 pwm=0.000 sysload=0.37 cputime=9.993 memavail=3582348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84927.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18858 bytes_read=72134 bytes_retransmit=9 bytes_invalid=0 send_seq=1120 receive_seq=1120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999503  heater_bed: target=0 temp=65.2 pwm=0.000 sysload=0.37 cputime=10.019 memavail=3582252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84928.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=18962 bytes_read=72320 bytes_retransmit=9 bytes_invalid=0 send_seq=1125 receive_seq=1125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=65.2 pwm=0.000 sysload=0.37 cputime=10.046 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84929.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=19017 bytes_read=72496 bytes_retransmit=9 bytes_invalid=0 send_seq=1128 receive_seq=1128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=65.2 pwm=0.000 sysload=0.37 cputime=10.073 memavail=3582260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84930.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=19072 bytes_read=72678 bytes_retransmit=9 bytes_invalid=0 send_seq=1131 receive_seq=1131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=65.1 pwm=0.000 sysload=0.37 cputime=10.100 memavail=3582268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84931.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=19078 bytes_read=72837 bytes_retransmit=9 bytes_invalid=0 send_seq=1132 receive_seq=1132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=65.1 pwm=0.000 sysload=0.34 cputime=10.125 memavail=3582272 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84932.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=19182 bytes_read=73023 bytes_retransmit=9 bytes_invalid=0 send_seq=1137 receive_seq=1137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=65.1 pwm=0.000 sysload=0.34 cputime=10.154 memavail=3582720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84933.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=19286 bytes_read=73209 bytes_retransmit=9 bytes_invalid=0 send_seq=1142 receive_seq=1142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=65.0 pwm=0.000 sysload=0.34 cputime=10.183 memavail=3582812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84934.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=19341 bytes_read=73385 bytes_retransmit=9 bytes_invalid=0 send_seq=1145 receive_seq=1145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=65.0 pwm=0.000 sysload=0.34 cputime=10.210 memavail=3582812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84935.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=19396 bytes_read=73576 bytes_retransmit=9 bytes_invalid=0 send_seq=1148 receive_seq=1148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=65.0 pwm=0.000 sysload=0.34 cputime=10.238 memavail=3582820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84936.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=19451 bytes_read=73752 bytes_retransmit=9 bytes_invalid=0 send_seq=1151 receive_seq=1151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=64.9 pwm=0.000 sysload=0.31 cputime=10.266 memavail=3582708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84937.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=19506 bytes_read=73928 bytes_retransmit=9 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=64.9 pwm=0.000 sysload=0.31 cputime=10.294 memavail=3582708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84938.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=19610 bytes_read=74114 bytes_retransmit=9 bytes_invalid=0 send_seq=1159 receive_seq=1159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999485  heater_bed: target=0 temp=64.9 pwm=0.000 sysload=0.31 cputime=10.324 memavail=3582712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84939.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=19616 bytes_read=74280 bytes_retransmit=9 bytes_invalid=0 send_seq=1160 receive_seq=1160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999486  heater_bed: target=0 temp=64.9 pwm=0.000 sysload=0.31 cputime=10.351 memavail=3582720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84940.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=19720 bytes_read=74481 bytes_retransmit=9 bytes_invalid=0 send_seq=1165 receive_seq=1165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999485  heater_bed: target=0 temp=64.9 pwm=0.000 sysload=0.31 cputime=10.383 memavail=3582724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84941.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=19726 bytes_read=74647 bytes_retransmit=9 bytes_invalid=0 send_seq=1166 receive_seq=1166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999486  heater_bed: target=0 temp=64.8 pwm=0.000 sysload=0.29 cputime=10.409 memavail=3582736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84942.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=19732 bytes_read=74813 bytes_retransmit=9 bytes_invalid=0 send_seq=1167 receive_seq=1167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=64.8 pwm=0.000 sysload=0.29 cputime=10.436 memavail=3582736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84943.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=19738 bytes_read=74979 bytes_retransmit=9 bytes_invalid=0 send_seq=1168 receive_seq=1168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=64.8 pwm=0.000 sysload=0.29 cputime=10.461 memavail=3582752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84944.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=19744 bytes_read=75145 bytes_retransmit=9 bytes_invalid=0 send_seq=1169 receive_seq=1169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999486  heater_bed: target=0 temp=64.7 pwm=0.000 sysload=0.29 cputime=10.487 memavail=3582752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84945.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=19750 bytes_read=75326 bytes_retransmit=9 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=64.7 pwm=0.000 sysload=0.29 cputime=10.513 memavail=3582760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84946.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=19756 bytes_read=75492 bytes_retransmit=9 bytes_invalid=0 send_seq=1171 receive_seq=1171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=64.7 pwm=0.000 sysload=0.26 cputime=10.539 memavail=3582664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84947.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=19762 bytes_read=75658 bytes_retransmit=9 bytes_invalid=0 send_seq=1172 receive_seq=1172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=64.7 pwm=0.000 sysload=0.26 cputime=10.566 memavail=3582668 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84948.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=19768 bytes_read=75824 bytes_retransmit=9 bytes_invalid=0 send_seq=1173 receive_seq=1173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=64.6 pwm=0.000 sysload=0.26 cputime=10.592 memavail=3582668 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84949.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=19774 bytes_read=75990 bytes_retransmit=9 bytes_invalid=0 send_seq=1174 receive_seq=1174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999498  heater_bed: target=0 temp=64.6 pwm=0.000 sysload=0.26 cputime=10.619 memavail=3582680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84950.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=19780 bytes_read=76170 bytes_retransmit=9 bytes_invalid=0 send_seq=1175 receive_seq=1175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999498  heater_bed: target=0 temp=64.6 pwm=0.000 sysload=0.26 cputime=10.645 memavail=3582684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84951.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=19792 bytes_read=76352 bytes_retransmit=9 bytes_invalid=0 send_seq=1177 receive_seq=1177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=64.5 pwm=0.000 sysload=0.24 cputime=10.671 memavail=3582684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84952.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=19798 bytes_read=76518 bytes_retransmit=9 bytes_invalid=0 send_seq=1178 receive_seq=1178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999494  heater_bed: target=0 temp=64.5 pwm=0.000 sysload=0.24 cputime=10.697 memavail=3582404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84953.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=19902 bytes_read=76703 bytes_retransmit=9 bytes_invalid=0 send_seq=1183 receive_seq=1183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999493  heater_bed: target=0 temp=64.5 pwm=0.000 sysload=0.24 cputime=10.726 memavail=3582508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84954.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=19962 bytes_read=76882 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=64.5 pwm=0.000 sysload=0.24 cputime=10.755 memavail=3582512 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84955.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20017 bytes_read=77055 bytes_retransmit=9 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=64.4 pwm=0.000 sysload=0.24 cputime=10.782 memavail=3582516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84956.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20072 bytes_read=77231 bytes_retransmit=9 bytes_invalid=0 send_seq=1192 receive_seq=1192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999490  heater_bed: target=0 temp=64.4 pwm=0.000 sysload=0.22 cputime=10.810 memavail=3582536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84957.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20078 bytes_read=77412 bytes_retransmit=9 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999490  heater_bed: target=0 temp=64.4 pwm=0.000 sysload=0.22 cputime=10.836 memavail=3582544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84958.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20084 bytes_read=77563 bytes_retransmit=9 bytes_invalid=0 send_seq=1194 receive_seq=1194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999490  heater_bed: target=0 temp=64.4 pwm=0.000 sysload=0.22 cputime=10.862 memavail=3582544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84959.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20090 bytes_read=77729 bytes_retransmit=9 bytes_invalid=0 send_seq=1195 receive_seq=1195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999491  heater_bed: target=0 temp=64.3 pwm=0.000 sysload=0.22 cputime=10.887 memavail=3582464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84960.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20096 bytes_read=77925 bytes_retransmit=9 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999494  heater_bed: target=0 temp=64.3 pwm=0.000 sysload=0.22 cputime=10.913 memavail=3582468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84961.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20102 bytes_read=78076 bytes_retransmit=9 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999494  heater_bed: target=0 temp=64.3 pwm=0.000 sysload=0.20 cputime=10.939 memavail=3582472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 84962.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20108 bytes_read=78242 bytes_retransmit=9 bytes_invalid=0 send_seq=1198 receive_seq=1198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=64.2 pwm=0.000 sysload=0.20 cputime=10.964 memavail=3582240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84963.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20114 bytes_read=78423 bytes_retransmit=9 bytes_invalid=0 send_seq=1199 receive_seq=1199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=64.2 pwm=0.000 sysload=0.20 cputime=10.982 memavail=3582248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84964.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20120 bytes_read=78574 bytes_retransmit=9 bytes_invalid=0 send_seq=1200 receive_seq=1200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=64.2 pwm=0.000 sysload=0.20 cputime=11.008 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84965.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20126 bytes_read=78754 bytes_retransmit=9 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=64.2 pwm=0.000 sysload=0.20 cputime=11.034 memavail=3582260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84966.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20132 bytes_read=78935 bytes_retransmit=9 bytes_invalid=0 send_seq=1202 receive_seq=1202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999498  heater_bed: target=0 temp=64.1 pwm=0.000 sysload=0.19 cputime=11.060 memavail=3582268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84967.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20138 bytes_read=79086 bytes_retransmit=9 bytes_invalid=0 send_seq=1203 receive_seq=1203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=64.1 pwm=0.000 sysload=0.19 cputime=11.085 memavail=3582268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84968.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20144 bytes_read=79252 bytes_retransmit=9 bytes_invalid=0 send_seq=1204 receive_seq=1204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=64.0 pwm=0.000 sysload=0.19 cputime=11.110 memavail=3582428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84969.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20150 bytes_read=79433 bytes_retransmit=9 bytes_invalid=0 send_seq=1205 receive_seq=1205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999498  heater_bed: target=0 temp=64.1 pwm=0.000 sysload=0.19 cputime=11.135 memavail=3582428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84970.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20156 bytes_read=79598 bytes_retransmit=9 bytes_invalid=0 send_seq=1206 receive_seq=1206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=64.0 pwm=0.000 sysload=0.19 cputime=11.161 memavail=3582440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84971.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20260 bytes_read=79784 bytes_retransmit=9 bytes_invalid=0 send_seq=1211 receive_seq=1211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=64.0 pwm=0.000 sysload=0.17 cputime=11.190 memavail=3582448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84972.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20266 bytes_read=79965 bytes_retransmit=9 bytes_invalid=0 send_seq=1212 receive_seq=1212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=64.0 pwm=0.000 sysload=0.17 cputime=11.216 memavail=3582516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84973.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20272 bytes_read=80116 bytes_retransmit=9 bytes_invalid=0 send_seq=1213 receive_seq=1213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=63.9 pwm=0.000 sysload=0.17 cputime=11.241 memavail=3582520 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84974.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20278 bytes_read=80282 bytes_retransmit=9 bytes_invalid=0 send_seq=1214 receive_seq=1214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=63.9 pwm=0.000 sysload=0.17 cputime=11.267 memavail=3582668 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84975.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20284 bytes_read=80478 bytes_retransmit=9 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=63.9 pwm=0.000 sysload=0.17 cputime=11.293 memavail=3582676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84976.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20290 bytes_read=80629 bytes_retransmit=9 bytes_invalid=0 send_seq=1216 receive_seq=1216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=63.9 pwm=0.000 sysload=0.24 cputime=11.319 memavail=3582676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84977.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20296 bytes_read=80794 bytes_retransmit=9 bytes_invalid=0 send_seq=1217 receive_seq=1217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=63.8 pwm=0.000 sysload=0.24 cputime=11.344 memavail=3582704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84978.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20302 bytes_read=80963 bytes_retransmit=9 bytes_invalid=0 send_seq=1218 receive_seq=1218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=63.8 pwm=0.000 sysload=0.24 cputime=11.370 memavail=3582708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84979.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20308 bytes_read=81110 bytes_retransmit=9 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=63.8 pwm=0.000 sysload=0.24 cputime=11.395 memavail=3582856 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84980.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20314 bytes_read=81305 bytes_retransmit=9 bytes_invalid=0 send_seq=1220 receive_seq=1220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=63.8 pwm=0.000 sysload=0.24 cputime=11.422 memavail=3582872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84981.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20320 bytes_read=81471 bytes_retransmit=9 bytes_invalid=0 send_seq=1221 receive_seq=1221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=63.7 pwm=0.000 sysload=0.22 cputime=11.448 memavail=3582872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84982.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20326 bytes_read=81622 bytes_retransmit=9 bytes_invalid=0 send_seq=1222 receive_seq=1222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=63.7 pwm=0.000 sysload=0.22 cputime=11.470 memavail=3582892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84983.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20332 bytes_read=81803 bytes_retransmit=9 bytes_invalid=0 send_seq=1223 receive_seq=1223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=63.7 pwm=0.000 sysload=0.22 cputime=11.496 memavail=3582892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84984.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20338 bytes_read=81969 bytes_retransmit=9 bytes_invalid=0 send_seq=1224 receive_seq=1224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=63.6 pwm=0.000 sysload=0.22 cputime=11.522 memavail=3582892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84985.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20344 bytes_read=82134 bytes_retransmit=9 bytes_invalid=0 send_seq=1225 receive_seq=1225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999510  heater_bed: target=0 temp=63.6 pwm=0.000 sysload=0.22 cputime=11.547 memavail=3582904 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84986.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20448 bytes_read=82335 bytes_retransmit=9 bytes_invalid=0 send_seq=1230 receive_seq=1230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=63.6 pwm=0.000 sysload=0.20 cputime=11.575 memavail=3582808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84987.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20503 bytes_read=82511 bytes_retransmit=9 bytes_invalid=0 send_seq=1233 receive_seq=1233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=63.6 pwm=0.000 sysload=0.20 cputime=11.601 memavail=3582812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84988.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20509 bytes_read=82662 bytes_retransmit=9 bytes_invalid=0 send_seq=1234 receive_seq=1234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=63.6 pwm=0.000 sysload=0.20 cputime=11.627 memavail=3582816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84989.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=20564 bytes_read=82853 bytes_retransmit=9 bytes_invalid=0 send_seq=1237 receive_seq=1237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=63.5 pwm=0.000 sysload=0.20 cputime=11.653 memavail=3582820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84990.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20668 bytes_read=83054 bytes_retransmit=9 bytes_invalid=0 send_seq=1242 receive_seq=1242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=63.5 pwm=0.000 sysload=0.20 cputime=11.680 memavail=3582844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 84991.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20821 bytes_read=83230 bytes_retransmit=9 bytes_invalid=0 send_seq=1248 receive_seq=1248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=63.5 pwm=0.000 sysload=0.18 cputime=11.710 memavail=3582848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84992.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20827 bytes_read=83411 bytes_retransmit=9 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=63.4 pwm=0.000 sysload=0.18 cputime=11.736 memavail=3583000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84993.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20833 bytes_read=83577 bytes_retransmit=9 bytes_invalid=0 send_seq=1250 receive_seq=1250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=63.4 pwm=0.000 sysload=0.18 cputime=11.761 memavail=3583124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84994.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=20839 bytes_read=83728 bytes_retransmit=9 bytes_invalid=0 send_seq=1251 receive_seq=1251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=63.4 pwm=0.000 sysload=0.18 cputime=11.787 memavail=3583124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84995.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=20894 bytes_read=83934 bytes_retransmit=9 bytes_invalid=0 send_seq=1254 receive_seq=1254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=63.3 pwm=0.000 sysload=0.18 cputime=11.816 memavail=3583008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84996.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=20949 bytes_read=84110 bytes_retransmit=9 bytes_invalid=0 send_seq=1257 receive_seq=1257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=63.3 pwm=0.000 sysload=0.17 cputime=11.842 memavail=3582912 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84997.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=20955 bytes_read=84261 bytes_retransmit=9 bytes_invalid=0 send_seq=1258 receive_seq=1258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999516  heater_bed: target=0 temp=63.3 pwm=0.000 sysload=0.17 cputime=11.868 memavail=3582800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84998.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=20961 bytes_read=84442 bytes_retransmit=9 bytes_invalid=0 send_seq=1259 receive_seq=1259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999516  heater_bed: target=0 temp=63.3 pwm=0.000 sysload=0.17 cputime=11.894 memavail=3582800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 84999.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=20967 bytes_read=84608 bytes_retransmit=9 bytes_invalid=0 send_seq=1260 receive_seq=1260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=63.2 pwm=0.000 sysload=0.17 cputime=11.919 memavail=3582692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85000.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=20973 bytes_read=84774 bytes_retransmit=9 bytes_invalid=0 send_seq=1261 receive_seq=1261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=63.2 pwm=0.000 sysload=0.17 cputime=11.944 memavail=3582572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85001.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=21077 bytes_read=84971 bytes_retransmit=9 bytes_invalid=0 send_seq=1266 receive_seq=1266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=63.2 pwm=0.000 sysload=0.16 cputime=11.975 memavail=3582464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85002.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=21181 bytes_read=85146 bytes_retransmit=9 bytes_invalid=0 send_seq=1271 receive_seq=1271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=63.2 pwm=0.000 sysload=0.16 cputime=12.001 memavail=3582872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85003.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=21285 bytes_read=85315 bytes_retransmit=9 bytes_invalid=0 send_seq=1276 receive_seq=1276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=63.1 pwm=0.000 sysload=0.16 cputime=12.029 memavail=3582660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85004.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=21340 bytes_read=85506 bytes_retransmit=9 bytes_invalid=0 send_seq=1279 receive_seq=1279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=63.1 pwm=0.000 sysload=0.16 cputime=12.057 memavail=3582540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85005.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21395 bytes_read=85697 bytes_retransmit=9 bytes_invalid=0 send_seq=1282 receive_seq=1282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=63.1 pwm=0.000 sysload=0.16 cputime=12.085 memavail=3582424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85006.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21499 bytes_read=85868 bytes_retransmit=9 bytes_invalid=0 send_seq=1287 receive_seq=1287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=63.0 pwm=0.000 sysload=0.14 cputime=12.114 memavail=3582432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85007.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21505 bytes_read=86049 bytes_retransmit=9 bytes_invalid=0 send_seq=1288 receive_seq=1288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=63.0 pwm=0.000 sysload=0.14 cputime=12.139 memavail=3582328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85008.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21609 bytes_read=86235 bytes_retransmit=9 bytes_invalid=0 send_seq=1293 receive_seq=1293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=63.0 pwm=0.000 sysload=0.14 cputime=12.166 memavail=3582360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85009.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21615 bytes_read=86386 bytes_retransmit=9 bytes_invalid=0 send_seq=1294 receive_seq=1294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=63.0 pwm=0.000 sysload=0.14 cputime=12.189 memavail=3582248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85010.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21670 bytes_read=86592 bytes_retransmit=9 bytes_invalid=0 send_seq=1297 receive_seq=1297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=62.9 pwm=0.000 sysload=0.14 cputime=12.216 memavail=3582248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85011.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21725 bytes_read=86768 bytes_retransmit=9 bytes_invalid=0 send_seq=1300 receive_seq=1300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=62.9 pwm=0.000 sysload=0.13 cputime=12.242 memavail=3582152 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85012.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21737 bytes_read=86935 bytes_retransmit=9 bytes_invalid=0 send_seq=1302 receive_seq=1302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=62.9 pwm=0.000 sysload=0.13 cputime=12.267 memavail=3581920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85013.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21841 bytes_read=87136 bytes_retransmit=9 bytes_invalid=0 send_seq=1307 receive_seq=1307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=62.9 pwm=0.000 sysload=0.13 cputime=12.295 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85014.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21945 bytes_read=87322 bytes_retransmit=9 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999506  heater_bed: target=0 temp=62.8 pwm=0.000 sysload=0.13 cputime=12.323 memavail=3581988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85015.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21951 bytes_read=87488 bytes_retransmit=9 bytes_invalid=0 send_seq=1313 receive_seq=1313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=62.9 pwm=0.000 sysload=0.13 cputime=12.349 memavail=3582020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85016.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21957 bytes_read=87669 bytes_retransmit=9 bytes_invalid=0 send_seq=1314 receive_seq=1314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=62.8 pwm=0.000 sysload=0.12 cputime=12.376 memavail=3582160 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85017.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=21963 bytes_read=87835 bytes_retransmit=9 bytes_invalid=0 send_seq=1315 receive_seq=1315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=62.8 pwm=0.000 sysload=0.12 cputime=12.401 memavail=3582268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85018.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=22018 bytes_read=87996 bytes_retransmit=9 bytes_invalid=0 send_seq=1318 receive_seq=1318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=62.7 pwm=0.000 sysload=0.12 cputime=12.429 memavail=3582348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85019.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=22024 bytes_read=88177 bytes_retransmit=9 bytes_invalid=0 send_seq=1319 receive_seq=1319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.7 pwm=0.000 sysload=0.12 cputime=12.456 memavail=3582276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85020.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=22030 bytes_read=88358 bytes_retransmit=9 bytes_invalid=0 send_seq=1320 receive_seq=1320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999506  heater_bed: target=0 temp=62.7 pwm=0.000 sysload=0.12 cputime=12.481 memavail=3582280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85021.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=22085 bytes_read=88519 bytes_retransmit=9 bytes_invalid=0 send_seq=1323 receive_seq=1323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.7 pwm=0.000 sysload=0.27 cputime=12.506 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85022.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=22140 bytes_read=88710 bytes_retransmit=9 bytes_invalid=0 send_seq=1326 receive_seq=1326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.6 pwm=0.000 sysload=0.27 cputime=12.532 memavail=3582700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85023.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=22195 bytes_read=88886 bytes_retransmit=9 bytes_invalid=0 send_seq=1329 receive_seq=1329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999506  heater_bed: target=0 temp=62.6 pwm=0.000 sysload=0.27 cputime=12.558 memavail=3582668 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 85024.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=22250 bytes_read=89047 bytes_retransmit=9 bytes_invalid=0 send_seq=1332 receive_seq=1332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.6 pwm=0.000 sysload=0.27 cputime=12.585 memavail=3582824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85025.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=22354 bytes_read=89257 bytes_retransmit=9 bytes_invalid=0 send_seq=1337 receive_seq=1337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.6 pwm=0.000 sysload=0.27 cputime=12.615 memavail=3582824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85026.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=22409 bytes_read=89422 bytes_retransmit=9 bytes_invalid=0 send_seq=1340 receive_seq=1340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.5 pwm=0.000 sysload=0.25 cputime=12.640 memavail=3582824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85027.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=22464 bytes_read=89583 bytes_retransmit=9 bytes_invalid=0 send_seq=1343 receive_seq=1343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.5 pwm=0.000 sysload=0.25 cputime=12.665 memavail=3582752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85028.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=22615 bytes_read=89789 bytes_retransmit=9 bytes_invalid=0 send_seq=1349 receive_seq=1349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.5 pwm=0.000 sysload=0.25 cputime=12.694 memavail=3582752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85029.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=22621 bytes_read=89955 bytes_retransmit=9 bytes_invalid=0 send_seq=1350 receive_seq=1350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.4 pwm=0.000 sysload=0.25 cputime=12.719 memavail=3582940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85030.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=22627 bytes_read=90121 bytes_retransmit=9 bytes_invalid=0 send_seq=1351 receive_seq=1351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=62.4 pwm=0.000 sysload=0.25 cputime=12.744 memavail=3583068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85031.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=22633 bytes_read=90302 bytes_retransmit=9 bytes_invalid=0 send_seq=1352 receive_seq=1352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.4 pwm=0.000 sysload=0.23 cputime=12.768 memavail=3582976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85032.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=22639 bytes_read=90468 bytes_retransmit=9 bytes_invalid=0 send_seq=1353 receive_seq=1353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.4 pwm=0.000 sysload=0.23 cputime=12.791 memavail=3583228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85033.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=22645 bytes_read=90619 bytes_retransmit=9 bytes_invalid=0 send_seq=1354 receive_seq=1354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.4 pwm=0.000 sysload=0.23 cputime=12.815 memavail=3583412 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85034.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=22651 bytes_read=90800 bytes_retransmit=9 bytes_invalid=0 send_seq=1355 receive_seq=1355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=62.3 pwm=0.000 sysload=0.23 cputime=12.840 memavail=3583472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85035.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=22657 bytes_read=90980 bytes_retransmit=9 bytes_invalid=0 send_seq=1356 receive_seq=1356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.3 pwm=0.000 sysload=0.23 cputime=12.865 memavail=3583456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85036.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=22663 bytes_read=91131 bytes_retransmit=9 bytes_invalid=0 send_seq=1357 receive_seq=1357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=62.3 pwm=0.000 sysload=0.21 cputime=12.890 memavail=3583576 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85037.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=22669 bytes_read=91312 bytes_retransmit=9 bytes_invalid=0 send_seq=1358 receive_seq=1358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=62.3 pwm=0.000 sysload=0.21 cputime=12.914 memavail=3583620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85038.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=22724 bytes_read=91488 bytes_retransmit=9 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=62.2 pwm=0.000 sysload=0.21 cputime=12.943 memavail=3583748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85039.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=22828 bytes_read=91659 bytes_retransmit=9 bytes_invalid=0 send_seq=1366 receive_seq=1366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999506  heater_bed: target=0 temp=62.2 pwm=0.000 sysload=0.21 cputime=12.971 memavail=3583684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85040.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=22883 bytes_read=91865 bytes_retransmit=9 bytes_invalid=0 send_seq=1369 receive_seq=1369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=62.2 pwm=0.000 sysload=0.21 cputime=12.998 memavail=3583748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85041.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=22889 bytes_read=92031 bytes_retransmit=9 bytes_invalid=0 send_seq=1370 receive_seq=1370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=62.2 pwm=0.000 sysload=0.19 cputime=13.024 memavail=3583924 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85042.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=22993 bytes_read=92217 bytes_retransmit=9 bytes_invalid=0 send_seq=1375 receive_seq=1375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999513  heater_bed: target=0 temp=62.1 pwm=0.000 sysload=0.19 cputime=13.051 memavail=3584852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85043.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=22999 bytes_read=92383 bytes_retransmit=9 bytes_invalid=0 send_seq=1376 receive_seq=1376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=62.1 pwm=0.000 sysload=0.19 cputime=13.076 memavail=3584812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85044.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23054 bytes_read=92559 bytes_retransmit=9 bytes_invalid=0 send_seq=1379 receive_seq=1379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999534  heater_bed: target=0 temp=62.1 pwm=0.000 sysload=0.19 cputime=13.103 memavail=3584816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85045.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23109 bytes_read=92750 bytes_retransmit=9 bytes_invalid=0 send_seq=1382 receive_seq=1382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=62.0 pwm=0.000 sysload=0.19 cputime=13.131 memavail=3584768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85046.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23115 bytes_read=92916 bytes_retransmit=9 bytes_invalid=0 send_seq=1383 receive_seq=1383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999536  heater_bed: target=0 temp=62.0 pwm=0.000 sysload=0.26 cputime=13.157 memavail=3584800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85047.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23121 bytes_read=93082 bytes_retransmit=9 bytes_invalid=0 send_seq=1384 receive_seq=1384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999534  heater_bed: target=0 temp=62.0 pwm=0.000 sysload=0.26 cputime=13.182 memavail=3584500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85048.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23176 bytes_read=93258 bytes_retransmit=9 bytes_invalid=0 send_seq=1387 receive_seq=1387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999534  heater_bed: target=0 temp=62.0 pwm=0.000 sysload=0.26 cputime=13.209 memavail=3584704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85049.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23231 bytes_read=93427 bytes_retransmit=9 bytes_invalid=0 send_seq=1390 receive_seq=1390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999533  heater_bed: target=0 temp=62.0 pwm=0.000 sysload=0.26 cputime=13.236 memavail=3584672 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85050.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23286 bytes_read=93594 bytes_retransmit=9 bytes_invalid=0 send_seq=1393 receive_seq=1393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=61.9 pwm=0.000 sysload=0.26 cputime=13.263 memavail=3584584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85051.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23341 bytes_read=93785 bytes_retransmit=9 bytes_invalid=0 send_seq=1396 receive_seq=1396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999531  heater_bed: target=0 temp=61.9 pwm=0.000 sysload=0.24 cputime=13.290 memavail=3584596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85052.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23347 bytes_read=93951 bytes_retransmit=9 bytes_invalid=0 send_seq=1397 receive_seq=1397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=61.9 pwm=0.000 sysload=0.24 cputime=13.314 memavail=3584676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85053.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23353 bytes_read=94117 bytes_retransmit=9 bytes_invalid=0 send_seq=1398 receive_seq=1398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999528  heater_bed: target=0 temp=61.8 pwm=0.000 sysload=0.24 cputime=13.339 memavail=3584620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85054.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23359 bytes_read=94283 bytes_retransmit=9 bytes_invalid=0 send_seq=1399 receive_seq=1399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=61.8 pwm=0.000 sysload=0.24 cputime=13.364 memavail=3584688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85055.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23365 bytes_read=94449 bytes_retransmit=9 bytes_invalid=0 send_seq=1400 receive_seq=1400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=61.8 pwm=0.000 sysload=0.24 cputime=13.390 memavail=3584784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85056.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=23420 bytes_read=94640 bytes_retransmit=9 bytes_invalid=0 send_seq=1403 receive_seq=1403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999526  heater_bed: target=0 temp=61.8 pwm=0.000 sysload=0.30 cputime=13.417 memavail=3584816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85057.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=23475 bytes_read=94816 bytes_retransmit=9 bytes_invalid=0 send_seq=1406 receive_seq=1406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=61.8 pwm=0.000 sysload=0.30 cputime=13.443 memavail=3584672 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85058.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=23481 bytes_read=94982 bytes_retransmit=9 bytes_invalid=0 send_seq=1407 receive_seq=1407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=61.7 pwm=0.000 sysload=0.30 cputime=13.469 memavail=3584636 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85059.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=23536 bytes_read=95158 bytes_retransmit=9 bytes_invalid=0 send_seq=1410 receive_seq=1410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=61.7 pwm=0.000 sysload=0.30 cputime=13.495 memavail=3584636 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85060.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=23591 bytes_read=95334 bytes_retransmit=9 bytes_invalid=0 send_seq=1413 receive_seq=1413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=61.7 pwm=0.000 sysload=0.30 cputime=13.521 memavail=3584580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85061.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23695 bytes_read=95535 bytes_retransmit=9 bytes_invalid=0 send_seq=1418 receive_seq=1418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=61.7 pwm=0.000 sysload=0.44 cputime=13.547 memavail=3584624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85062.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23701 bytes_read=95701 bytes_retransmit=9 bytes_invalid=0 send_seq=1419 receive_seq=1419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=61.6 pwm=0.000 sysload=0.44 cputime=13.570 memavail=3585044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85063.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23707 bytes_read=95867 bytes_retransmit=9 bytes_invalid=0 send_seq=1420 receive_seq=1420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=61.6 pwm=0.000 sysload=0.44 cputime=13.595 memavail=3585240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85064.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23713 bytes_read=96033 bytes_retransmit=9 bytes_invalid=0 send_seq=1421 receive_seq=1421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=61.6 pwm=0.000 sysload=0.44 cputime=13.620 memavail=3585120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85065.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=23719 bytes_read=96199 bytes_retransmit=9 bytes_invalid=0 send_seq=1422 receive_seq=1422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=61.5 pwm=0.000 sysload=0.44 cputime=13.645 memavail=3585168 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85066.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=23774 bytes_read=96390 bytes_retransmit=9 bytes_invalid=0 send_seq=1425 receive_seq=1425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=61.5 pwm=0.000 sysload=0.40 cputime=13.672 memavail=3585076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85067.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=23829 bytes_read=96566 bytes_retransmit=9 bytes_invalid=0 send_seq=1428 receive_seq=1428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=61.5 pwm=0.000 sysload=0.40 cputime=13.700 memavail=3584864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85068.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=23933 bytes_read=96747 bytes_retransmit=9 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=61.5 pwm=0.000 sysload=0.40 cputime=13.728 memavail=3585040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85069.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24037 bytes_read=96933 bytes_retransmit=9 bytes_invalid=0 send_seq=1437 receive_seq=1437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=61.4 pwm=0.000 sysload=0.40 cputime=13.755 memavail=3584952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85070.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24092 bytes_read=97109 bytes_retransmit=9 bytes_invalid=0 send_seq=1440 receive_seq=1440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=61.4 pwm=0.000 sysload=0.40 cputime=13.782 memavail=3585112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85071.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=24098 bytes_read=97290 bytes_retransmit=9 bytes_invalid=0 send_seq=1441 receive_seq=1441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=61.4 pwm=0.000 sysload=0.37 cputime=13.806 memavail=3585136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85072.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=24104 bytes_read=97456 bytes_retransmit=9 bytes_invalid=0 send_seq=1442 receive_seq=1442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=61.4 pwm=0.000 sysload=0.37 cputime=13.831 memavail=3584764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85073.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=24116 bytes_read=97629 bytes_retransmit=9 bytes_invalid=0 send_seq=1444 receive_seq=1444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=61.4 pwm=0.000 sysload=0.37 cputime=13.857 memavail=3584704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85074.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=24122 bytes_read=97788 bytes_retransmit=9 bytes_invalid=0 send_seq=1445 receive_seq=1445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=61.3 pwm=0.000 sysload=0.37 cputime=13.881 memavail=3584640 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85075.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=24172 bytes_read=97974 bytes_retransmit=9 bytes_invalid=0 send_seq=1447 receive_seq=1447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=61.3 pwm=0.000 sysload=0.37 cputime=13.907 memavail=3584800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85076.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=24227 bytes_read=98150 bytes_retransmit=9 bytes_invalid=0 send_seq=1450 receive_seq=1450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=61.3 pwm=0.000 sysload=0.50 cputime=13.932 memavail=3584680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85077.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=24282 bytes_read=98326 bytes_retransmit=9 bytes_invalid=0 send_seq=1453 receive_seq=1453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=61.2 pwm=0.000 sysload=0.50 cputime=13.958 memavail=3584636 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85078.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=24337 bytes_read=98502 bytes_retransmit=9 bytes_invalid=0 send_seq=1456 receive_seq=1456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=61.2 pwm=0.000 sysload=0.50 cputime=13.984 memavail=3584584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85079.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=24343 bytes_read=98668 bytes_retransmit=9 bytes_invalid=0 send_seq=1457 receive_seq=1457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=61.2 pwm=0.000 sysload=0.50 cputime=14.009 memavail=3584524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85080.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24349 bytes_read=98849 bytes_retransmit=9 bytes_invalid=0 send_seq=1458 receive_seq=1458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=61.1 pwm=0.000 sysload=0.50 cputime=14.034 memavail=3584404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85081.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24355 bytes_read=99015 bytes_retransmit=9 bytes_invalid=0 send_seq=1459 receive_seq=1459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=61.1 pwm=0.000 sysload=0.46 cputime=14.058 memavail=3584320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85082.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24361 bytes_read=99181 bytes_retransmit=9 bytes_invalid=0 send_seq=1460 receive_seq=1460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=61.1 pwm=0.000 sysload=0.46 cputime=14.081 memavail=3584580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85083.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24367 bytes_read=99347 bytes_retransmit=9 bytes_invalid=0 send_seq=1461 receive_seq=1461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999528  heater_bed: target=0 temp=61.1 pwm=0.000 sysload=0.46 cputime=14.107 memavail=3584580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85084.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24373 bytes_read=99513 bytes_retransmit=9 bytes_invalid=0 send_seq=1462 receive_seq=1462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999526  heater_bed: target=0 temp=61.0 pwm=0.000 sysload=0.46 cputime=14.133 memavail=3584460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85085.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24379 bytes_read=99693 bytes_retransmit=9 bytes_invalid=0 send_seq=1463 receive_seq=1463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=61.0 pwm=0.000 sysload=0.46 cputime=14.158 memavail=3584372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85086.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24434 bytes_read=99869 bytes_retransmit=9 bytes_invalid=0 send_seq=1466 receive_seq=1466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=61.0 pwm=0.000 sysload=0.42 cputime=14.184 memavail=3584156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85087.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24489 bytes_read=100045 bytes_retransmit=9 bytes_invalid=0 send_seq=1469 receive_seq=1469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=61.0 pwm=0.000 sysload=0.42 cputime=14.212 memavail=3584200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85088.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24495 bytes_read=100211 bytes_retransmit=9 bytes_invalid=0 send_seq=1470 receive_seq=1470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=61.0 pwm=0.000 sysload=0.42 cputime=14.239 memavail=3584020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85089.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24501 bytes_read=100377 bytes_retransmit=9 bytes_invalid=0 send_seq=1471 receive_seq=1471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=61.0 pwm=0.000 sysload=0.42 cputime=14.266 memavail=3583848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85090.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24507 bytes_read=100558 bytes_retransmit=9 bytes_invalid=0 send_seq=1472 receive_seq=1472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=60.9 pwm=0.000 sysload=0.42 cputime=14.293 memavail=3583852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85091.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24513 bytes_read=100724 bytes_retransmit=9 bytes_invalid=0 send_seq=1473 receive_seq=1473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=60.9 pwm=0.000 sysload=0.39 cputime=14.320 memavail=3583804 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85092.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24519 bytes_read=100890 bytes_retransmit=9 bytes_invalid=0 send_seq=1474 receive_seq=1474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=60.9 pwm=0.000 sysload=0.39 cputime=14.346 memavail=3583532 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85093.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24525 bytes_read=101056 bytes_retransmit=9 bytes_invalid=0 send_seq=1475 receive_seq=1475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=60.8 pwm=0.000 sysload=0.39 cputime=14.371 memavail=3583508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85094.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24580 bytes_read=101232 bytes_retransmit=9 bytes_invalid=0 send_seq=1478 receive_seq=1478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=60.8 pwm=0.000 sysload=0.39 cputime=14.398 memavail=3583536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85095.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24635 bytes_read=101423 bytes_retransmit=9 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=60.8 pwm=0.000 sysload=0.39 cputime=14.425 memavail=3583548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85096.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24641 bytes_read=101589 bytes_retransmit=9 bytes_invalid=0 send_seq=1482 receive_seq=1482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=60.8 pwm=0.000 sysload=0.36 cputime=14.451 memavail=3583568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85097.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24647 bytes_read=101743 bytes_retransmit=9 bytes_invalid=0 send_seq=1483 receive_seq=1483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=60.7 pwm=0.000 sysload=0.36 cputime=14.476 memavail=3583464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85098.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24653 bytes_read=101903 bytes_retransmit=9 bytes_invalid=0 send_seq=1484 receive_seq=1484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=60.7 pwm=0.000 sysload=0.36 cputime=14.504 memavail=3583500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85099.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24659 bytes_read=102069 bytes_retransmit=9 bytes_invalid=0 send_seq=1485 receive_seq=1485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=60.7 pwm=0.000 sysload=0.36 cputime=14.530 memavail=3583456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85100.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24665 bytes_read=102249 bytes_retransmit=9 bytes_invalid=0 send_seq=1486 receive_seq=1486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=60.6 pwm=0.000 sysload=0.36 cputime=14.556 memavail=3583464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85101.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24671 bytes_read=102415 bytes_retransmit=9 bytes_invalid=0 send_seq=1487 receive_seq=1487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999526  heater_bed: target=0 temp=60.7 pwm=0.000 sysload=0.41 cputime=14.581 memavail=3583480 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85102.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24677 bytes_read=102581 bytes_retransmit=9 bytes_invalid=0 send_seq=1488 receive_seq=1488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999538  heater_bed: target=0 temp=60.6 pwm=0.000 sysload=0.41 cputime=14.605 memavail=3583032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85103.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24732 bytes_read=102757 bytes_retransmit=9 bytes_invalid=0 send_seq=1491 receive_seq=1491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999537  heater_bed: target=0 temp=60.6 pwm=0.000 sysload=0.41 cputime=14.630 memavail=3583088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85104.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24787 bytes_read=102933 bytes_retransmit=9 bytes_invalid=0 send_seq=1494 receive_seq=1494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=60.6 pwm=0.000 sysload=0.41 cputime=14.655 memavail=3583112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85105.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24793 bytes_read=103114 bytes_retransmit=9 bytes_invalid=0 send_seq=1495 receive_seq=1495 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999531  heater_bed: target=0 temp=60.6 pwm=0.000 sysload=0.41 cputime=14.680 memavail=3583152 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85106.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24799 bytes_read=103295 bytes_retransmit=9 bytes_invalid=0 send_seq=1496 receive_seq=1496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=60.5 pwm=0.000 sysload=0.38 cputime=14.705 memavail=3583128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85107.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24805 bytes_read=103446 bytes_retransmit=9 bytes_invalid=0 send_seq=1497 receive_seq=1497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=60.5 pwm=0.000 sysload=0.38 cputime=14.728 memavail=3583264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85108.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24825 bytes_read=103617 bytes_retransmit=9 bytes_invalid=0 send_seq=1499 receive_seq=1499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=60.5 pwm=0.000 sysload=0.38 cputime=14.753 memavail=3583232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85109.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=24871 bytes_read=103803 bytes_retransmit=9 bytes_invalid=0 send_seq=1501 receive_seq=1501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=60.5 pwm=0.000 sysload=0.38 cputime=14.779 memavail=3583228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85110.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24877 bytes_read=103969 bytes_retransmit=9 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999531  heater_bed: target=0 temp=60.4 pwm=0.000 sysload=0.38 cputime=14.803 memavail=3583216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85111.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24883 bytes_read=104135 bytes_retransmit=9 bytes_invalid=0 send_seq=1503 receive_seq=1503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999534  heater_bed: target=0 temp=60.4 pwm=0.000 sysload=0.35 cputime=14.829 memavail=3583160 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85112.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24889 bytes_read=104316 bytes_retransmit=9 bytes_invalid=0 send_seq=1504 receive_seq=1504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999533  heater_bed: target=0 temp=60.4 pwm=0.000 sysload=0.35 cputime=14.855 memavail=3583132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85113.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24895 bytes_read=104467 bytes_retransmit=9 bytes_invalid=0 send_seq=1505 receive_seq=1505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=60.4 pwm=0.000 sysload=0.35 cputime=14.878 memavail=3583184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85114.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=24901 bytes_read=104633 bytes_retransmit=9 bytes_invalid=0 send_seq=1506 receive_seq=1506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=60.3 pwm=0.000 sysload=0.35 cputime=14.903 memavail=3583184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85115.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24907 bytes_read=104828 bytes_retransmit=9 bytes_invalid=0 send_seq=1507 receive_seq=1507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=60.3 pwm=0.000 sysload=0.35 cputime=14.928 memavail=3583068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85116.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24913 bytes_read=104979 bytes_retransmit=9 bytes_invalid=0 send_seq=1508 receive_seq=1508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=60.3 pwm=0.000 sysload=0.32 cputime=14.953 memavail=3583196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85118.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24919 bytes_read=105145 bytes_retransmit=9 bytes_invalid=0 send_seq=1509 receive_seq=1509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999526  heater_bed: target=0 temp=60.3 pwm=0.000 sysload=0.32 cputime=14.978 memavail=3583080 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85119.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24925 bytes_read=105326 bytes_retransmit=9 bytes_invalid=0 send_seq=1510 receive_seq=1510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=60.3 pwm=0.000 sysload=0.32 cputime=15.004 memavail=3583056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85120.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24931 bytes_read=105477 bytes_retransmit=9 bytes_invalid=0 send_seq=1511 receive_seq=1511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=60.2 pwm=0.000 sysload=0.32 cputime=15.029 memavail=3583104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85121.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24937 bytes_read=105642 bytes_retransmit=9 bytes_invalid=0 send_seq=1512 receive_seq=1512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=60.2 pwm=0.000 sysload=0.32 cputime=15.054 memavail=3582984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85122.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24943 bytes_read=105824 bytes_retransmit=9 bytes_invalid=0 send_seq=1513 receive_seq=1513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999531  heater_bed: target=0 temp=60.2 pwm=0.000 sysload=0.29 cputime=15.079 memavail=3582876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 85123.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24949 bytes_read=105971 bytes_retransmit=9 bytes_invalid=0 send_seq=1514 receive_seq=1514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=60.2 pwm=0.000 sysload=0.29 cputime=15.102 memavail=3582844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85124.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24955 bytes_read=106137 bytes_retransmit=9 bytes_invalid=0 send_seq=1515 receive_seq=1515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999528  heater_bed: target=0 temp=60.1 pwm=0.000 sysload=0.29 cputime=15.128 memavail=3583060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85125.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24961 bytes_read=106318 bytes_retransmit=9 bytes_invalid=0 send_seq=1516 receive_seq=1516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=60.1 pwm=0.000 sysload=0.29 cputime=15.153 memavail=3583052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85126.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24967 bytes_read=106469 bytes_retransmit=9 bytes_invalid=0 send_seq=1517 receive_seq=1517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=60.1 pwm=0.000 sysload=0.29 cputime=15.177 memavail=3583100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85127.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24973 bytes_read=106664 bytes_retransmit=9 bytes_invalid=0 send_seq=1518 receive_seq=1518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=60.0 pwm=0.000 sysload=0.27 cputime=15.202 memavail=3583088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85128.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24979 bytes_read=106830 bytes_retransmit=9 bytes_invalid=0 send_seq=1519 receive_seq=1519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=60.1 pwm=0.000 sysload=0.27 cputime=15.226 memavail=3583040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85129.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24985 bytes_read=106981 bytes_retransmit=9 bytes_invalid=0 send_seq=1520 receive_seq=1520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=60.0 pwm=0.000 sysload=0.27 cputime=15.250 memavail=3582732 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85130.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24991 bytes_read=107162 bytes_retransmit=9 bytes_invalid=0 send_seq=1521 receive_seq=1521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=60.0 pwm=0.000 sysload=0.27 cputime=15.275 memavail=3583088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85131.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=24997 bytes_read=107328 bytes_retransmit=9 bytes_invalid=0 send_seq=1522 receive_seq=1522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=60.0 pwm=0.000 sysload=0.27 cputime=15.300 memavail=3582872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85132.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25003 bytes_read=107493 bytes_retransmit=9 bytes_invalid=0 send_seq=1523 receive_seq=1523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=59.9 pwm=0.000 sysload=0.25 cputime=15.324 memavail=3582924 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85133.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25009 bytes_read=107674 bytes_retransmit=9 bytes_invalid=0 send_seq=1524 receive_seq=1524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=59.9 pwm=0.000 sysload=0.25 cputime=15.349 memavail=3582944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85134.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25015 bytes_read=107840 bytes_retransmit=9 bytes_invalid=0 send_seq=1525 receive_seq=1525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.9 pwm=0.000 sysload=0.25 cputime=15.374 memavail=3582784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85135.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25027 bytes_read=107991 bytes_retransmit=9 bytes_invalid=0 send_seq=1527 receive_seq=1526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=59.9 pwm=0.000 sysload=0.25 cputime=15.399 memavail=3582656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85136.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25033 bytes_read=108188 bytes_retransmit=9 bytes_invalid=0 send_seq=1528 receive_seq=1528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999516  heater_bed: target=0 temp=59.9 pwm=0.000 sysload=0.25 cputime=15.425 memavail=3582756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85137.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25039 bytes_read=108368 bytes_retransmit=9 bytes_invalid=0 send_seq=1529 receive_seq=1529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.8 pwm=0.000 sysload=0.23 cputime=15.449 memavail=3582796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85138.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25045 bytes_read=108519 bytes_retransmit=9 bytes_invalid=0 send_seq=1530 receive_seq=1530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999516  heater_bed: target=0 temp=59.8 pwm=0.000 sysload=0.23 cputime=15.474 memavail=3582668 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85139.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25051 bytes_read=108700 bytes_retransmit=9 bytes_invalid=0 send_seq=1531 receive_seq=1531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.8 pwm=0.000 sysload=0.23 cputime=15.497 memavail=3582588 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85140.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25057 bytes_read=108866 bytes_retransmit=9 bytes_invalid=0 send_seq=1532 receive_seq=1532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.8 pwm=0.000 sysload=0.23 cputime=15.522 memavail=3582600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85141.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25063 bytes_read=109017 bytes_retransmit=9 bytes_invalid=0 send_seq=1533 receive_seq=1533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.8 pwm=0.000 sysload=0.23 cputime=15.547 memavail=3582604 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85142.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25069 bytes_read=109212 bytes_retransmit=9 bytes_invalid=0 send_seq=1534 receive_seq=1534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=59.7 pwm=0.000 sysload=0.21 cputime=15.575 memavail=3582520 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85143.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25075 bytes_read=109378 bytes_retransmit=9 bytes_invalid=0 send_seq=1535 receive_seq=1535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=59.7 pwm=0.000 sysload=0.21 cputime=15.598 memavail=3582644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85144.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25081 bytes_read=109529 bytes_retransmit=9 bytes_invalid=0 send_seq=1536 receive_seq=1536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=59.7 pwm=0.000 sysload=0.21 cputime=15.622 memavail=3582624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85145.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25087 bytes_read=109707 bytes_retransmit=9 bytes_invalid=0 send_seq=1537 receive_seq=1537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999516  heater_bed: target=0 temp=59.6 pwm=0.000 sysload=0.21 cputime=15.646 memavail=3582580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85146.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25093 bytes_read=109862 bytes_retransmit=9 bytes_invalid=0 send_seq=1538 receive_seq=1538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=59.6 pwm=0.000 sysload=0.21 cputime=15.669 memavail=3582524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85147.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25099 bytes_read=110025 bytes_retransmit=9 bytes_invalid=0 send_seq=1539 receive_seq=1539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=59.6 pwm=0.000 sysload=0.19 cputime=15.694 memavail=3582652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85148.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25105 bytes_read=110206 bytes_retransmit=9 bytes_invalid=0 send_seq=1540 receive_seq=1540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=59.5 pwm=0.000 sysload=0.19 cputime=15.721 memavail=3582524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85149.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25111 bytes_read=110372 bytes_retransmit=9 bytes_invalid=0 send_seq=1541 receive_seq=1541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=59.5 pwm=0.000 sysload=0.19 cputime=15.743 memavail=3582428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85150.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25117 bytes_read=110523 bytes_retransmit=9 bytes_invalid=0 send_seq=1542 receive_seq=1542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=59.5 pwm=0.000 sysload=0.19 cputime=15.768 memavail=3582564 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85151.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25123 bytes_read=110704 bytes_retransmit=9 bytes_invalid=0 send_seq=1543 receive_seq=1543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=59.5 pwm=0.000 sysload=0.19 cputime=15.793 memavail=3582700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85152.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25196 bytes_read=110894 bytes_retransmit=9 bytes_invalid=0 send_seq=1546 receive_seq=1546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=59.5 pwm=0.000 sysload=0.18 cputime=15.820 memavail=3582488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85153.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25217 bytes_read=111065 bytes_retransmit=9 bytes_invalid=0 send_seq=1548 receive_seq=1548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999516  heater_bed: target=0 temp=59.4 pwm=0.000 sysload=0.18 cputime=15.844 memavail=3582356 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85154.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25223 bytes_read=111231 bytes_retransmit=9 bytes_invalid=0 send_seq=1549 receive_seq=1549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.4 pwm=0.000 sysload=0.18 cputime=15.868 memavail=3582344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85155.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25229 bytes_read=111397 bytes_retransmit=9 bytes_invalid=0 send_seq=1550 receive_seq=1550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=59.4 pwm=0.000 sysload=0.18 cputime=15.893 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85156.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25235 bytes_read=111563 bytes_retransmit=9 bytes_invalid=0 send_seq=1551 receive_seq=1551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999513  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.18 cputime=15.917 memavail=3582128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85157.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=25241 bytes_read=111744 bytes_retransmit=9 bytes_invalid=0 send_seq=1552 receive_seq=1552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.16 cputime=15.943 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85158.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=25247 bytes_read=111910 bytes_retransmit=9 bytes_invalid=0 send_seq=1553 receive_seq=1553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.16 cputime=15.968 memavail=3582296 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85159.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=25253 bytes_read=112076 bytes_retransmit=9 bytes_invalid=0 send_seq=1554 receive_seq=1554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.16 cputime=15.993 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85160.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=25259 bytes_read=112242 bytes_retransmit=9 bytes_invalid=0 send_seq=1555 receive_seq=1555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.16 cputime=16.017 memavail=3582296 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85161.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=25265 bytes_read=112408 bytes_retransmit=9 bytes_invalid=0 send_seq=1556 receive_seq=1556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.16 cputime=16.042 memavail=3582176 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85162.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25271 bytes_read=112588 bytes_retransmit=9 bytes_invalid=0 send_seq=1557 receive_seq=1557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.15 cputime=16.066 memavail=3582076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85163.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25277 bytes_read=112754 bytes_retransmit=9 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=59.2 pwm=0.000 sysload=0.15 cputime=16.091 memavail=3582100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85164.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25283 bytes_read=112920 bytes_retransmit=9 bytes_invalid=0 send_seq=1559 receive_seq=1559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=59.2 pwm=0.000 sysload=0.15 cputime=16.115 memavail=3581996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85165.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25289 bytes_read=113086 bytes_retransmit=9 bytes_invalid=0 send_seq=1560 receive_seq=1560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.2 pwm=0.000 sysload=0.15 cputime=16.139 memavail=3582020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85166.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25295 bytes_read=113252 bytes_retransmit=9 bytes_invalid=0 send_seq=1561 receive_seq=1561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.1 pwm=0.000 sysload=0.15 cputime=16.164 memavail=3582040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85167.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25301 bytes_read=113432 bytes_retransmit=9 bytes_invalid=0 send_seq=1562 receive_seq=1562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.1 pwm=0.000 sysload=0.14 cputime=16.187 memavail=3582056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85168.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25307 bytes_read=113598 bytes_retransmit=9 bytes_invalid=0 send_seq=1563 receive_seq=1563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999515  heater_bed: target=0 temp=59.1 pwm=0.000 sysload=0.14 cputime=16.210 memavail=3581968 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85169.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25313 bytes_read=113759 bytes_retransmit=9 bytes_invalid=0 send_seq=1564 receive_seq=1564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999513  heater_bed: target=0 temp=59.1 pwm=0.000 sysload=0.14 cputime=16.235 memavail=3582128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85170.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25319 bytes_read=113914 bytes_retransmit=9 bytes_invalid=0 send_seq=1565 receive_seq=1565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=59.1 pwm=0.000 sysload=0.14 cputime=16.260 memavail=3582028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85171.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25325 bytes_read=114080 bytes_retransmit=9 bytes_invalid=0 send_seq=1566 receive_seq=1566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999533  heater_bed: target=0 temp=59.0 pwm=0.000 sysload=0.14 cputime=16.284 memavail=3581940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85172.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25331 bytes_read=114260 bytes_retransmit=9 bytes_invalid=0 send_seq=1567 receive_seq=1567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999531  heater_bed: target=0 temp=59.0 pwm=0.000 sysload=0.12 cputime=16.309 memavail=3582132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85173.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25337 bytes_read=114426 bytes_retransmit=9 bytes_invalid=0 send_seq=1568 receive_seq=1568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=59.0 pwm=0.000 sysload=0.12 cputime=16.333 memavail=3581912 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85174.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25343 bytes_read=114592 bytes_retransmit=9 bytes_invalid=0 send_seq=1569 receive_seq=1569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=59.0 pwm=0.000 sysload=0.12 cputime=16.357 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85175.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25349 bytes_read=114758 bytes_retransmit=9 bytes_invalid=0 send_seq=1570 receive_seq=1570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=58.9 pwm=0.000 sysload=0.12 cputime=16.383 memavail=3581748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85176.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25355 bytes_read=114924 bytes_retransmit=9 bytes_invalid=0 send_seq=1571 receive_seq=1571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=58.9 pwm=0.000 sysload=0.12 cputime=16.407 memavail=3581812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85177.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25361 bytes_read=115104 bytes_retransmit=9 bytes_invalid=0 send_seq=1572 receive_seq=1572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999531  heater_bed: target=0 temp=58.9 pwm=0.000 sysload=0.19 cputime=16.432 memavail=3581736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85178.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25367 bytes_read=115285 bytes_retransmit=9 bytes_invalid=0 send_seq=1573 receive_seq=1573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=58.9 pwm=0.000 sysload=0.19 cputime=16.458 memavail=3581956 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85179.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25373 bytes_read=115436 bytes_retransmit=9 bytes_invalid=0 send_seq=1574 receive_seq=1574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=58.9 pwm=0.000 sysload=0.19 cputime=16.483 memavail=3581980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85180.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25379 bytes_read=115602 bytes_retransmit=9 bytes_invalid=0 send_seq=1575 receive_seq=1575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=58.8 pwm=0.000 sysload=0.19 cputime=16.509 memavail=3582120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85181.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25385 bytes_read=115783 bytes_retransmit=9 bytes_invalid=0 send_seq=1576 receive_seq=1576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999528  heater_bed: target=0 temp=58.8 pwm=0.000 sysload=0.19 cputime=16.535 memavail=3581992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85182.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25391 bytes_read=115948 bytes_retransmit=9 bytes_invalid=0 send_seq=1577 receive_seq=1577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=58.8 pwm=0.000 sysload=0.18 cputime=16.560 memavail=3581940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85183.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25397 bytes_read=116114 bytes_retransmit=9 bytes_invalid=0 send_seq=1578 receive_seq=1578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=58.8 pwm=0.000 sysload=0.18 cputime=16.586 memavail=3581736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85184.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25403 bytes_read=116295 bytes_retransmit=9 bytes_invalid=0 send_seq=1579 receive_seq=1579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=58.7 pwm=0.000 sysload=0.18 cputime=16.613 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 85185.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25409 bytes_read=116446 bytes_retransmit=9 bytes_invalid=0 send_seq=1580 receive_seq=1580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=58.7 pwm=0.000 sysload=0.18 cputime=16.637 memavail=3581848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85186.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25415 bytes_read=116612 bytes_retransmit=9 bytes_invalid=0 send_seq=1581 receive_seq=1581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=58.7 pwm=0.000 sysload=0.18 cputime=16.662 memavail=3581900 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85187.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25421 bytes_read=116807 bytes_retransmit=9 bytes_invalid=0 send_seq=1582 receive_seq=1582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=58.7 pwm=0.000 sysload=0.25 cputime=16.687 memavail=3581844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85188.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25427 bytes_read=116958 bytes_retransmit=9 bytes_invalid=0 send_seq=1583 receive_seq=1583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=58.7 pwm=0.000 sysload=0.25 cputime=16.713 memavail=3581996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85189.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25433 bytes_read=117139 bytes_retransmit=9 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=58.6 pwm=0.000 sysload=0.25 cputime=16.740 memavail=3581940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85190.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25439 bytes_read=117305 bytes_retransmit=9 bytes_invalid=0 send_seq=1585 receive_seq=1585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=58.6 pwm=0.000 sysload=0.25 cputime=16.765 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85191.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25445 bytes_read=117456 bytes_retransmit=9 bytes_invalid=0 send_seq=1586 receive_seq=1586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999528  heater_bed: target=0 temp=58.6 pwm=0.000 sysload=0.25 cputime=16.791 memavail=3582264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85192.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25451 bytes_read=117651 bytes_retransmit=9 bytes_invalid=0 send_seq=1587 receive_seq=1587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=58.6 pwm=0.000 sysload=0.22 cputime=16.818 memavail=3582244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85193.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25463 bytes_read=117810 bytes_retransmit=9 bytes_invalid=0 send_seq=1589 receive_seq=1588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=58.5 pwm=0.000 sysload=0.22 cputime=16.842 memavail=3582352 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85194.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25469 bytes_read=117966 bytes_retransmit=9 bytes_invalid=0 send_seq=1590 receive_seq=1590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=58.5 pwm=0.000 sysload=0.22 cputime=16.866 memavail=3582584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85195.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25475 bytes_read=118147 bytes_retransmit=9 bytes_invalid=0 send_seq=1591 receive_seq=1591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=58.5 pwm=0.000 sysload=0.22 cputime=16.891 memavail=3582592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85196.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25529 bytes_read=118323 bytes_retransmit=9 bytes_invalid=0 send_seq=1594 receive_seq=1594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=58.4 pwm=0.000 sysload=0.22 cputime=16.917 memavail=3582676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85197.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25535 bytes_read=118488 bytes_retransmit=9 bytes_invalid=0 send_seq=1595 receive_seq=1595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=58.4 pwm=0.000 sysload=0.21 cputime=16.942 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85198.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25541 bytes_read=118669 bytes_retransmit=9 bytes_invalid=0 send_seq=1596 receive_seq=1596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=58.4 pwm=0.000 sysload=0.21 cputime=16.966 memavail=3582944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85199.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25547 bytes_read=118835 bytes_retransmit=9 bytes_invalid=0 send_seq=1597 receive_seq=1597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=58.4 pwm=0.000 sysload=0.21 cputime=16.990 memavail=3583036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85200.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25553 bytes_read=118986 bytes_retransmit=9 bytes_invalid=0 send_seq=1598 receive_seq=1598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=58.4 pwm=0.000 sysload=0.21 cputime=17.014 memavail=3583104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85201.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=25559 bytes_read=119167 bytes_retransmit=9 bytes_invalid=0 send_seq=1599 receive_seq=1599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=58.4 pwm=0.000 sysload=0.21 cputime=17.040 memavail=3583104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85202.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25565 bytes_read=119347 bytes_retransmit=9 bytes_invalid=0 send_seq=1600 receive_seq=1600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=58.3 pwm=0.000 sysload=0.19 cputime=17.066 memavail=3583256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85203.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25571 bytes_read=119498 bytes_retransmit=9 bytes_invalid=0 send_seq=1601 receive_seq=1601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=58.3 pwm=0.000 sysload=0.19 cputime=17.089 memavail=3583192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85204.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25577 bytes_read=119679 bytes_retransmit=9 bytes_invalid=0 send_seq=1602 receive_seq=1602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=58.3 pwm=0.000 sysload=0.19 cputime=17.114 memavail=3583200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85205.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25583 bytes_read=119845 bytes_retransmit=9 bytes_invalid=0 send_seq=1603 receive_seq=1603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=58.3 pwm=0.000 sysload=0.19 cputime=17.139 memavail=3583248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85206.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25589 bytes_read=119996 bytes_retransmit=9 bytes_invalid=0 send_seq=1604 receive_seq=1604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=58.3 pwm=0.000 sysload=0.19 cputime=17.163 memavail=3583304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85207.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25595 bytes_read=120191 bytes_retransmit=9 bytes_invalid=0 send_seq=1605 receive_seq=1605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=58.2 pwm=0.000 sysload=0.17 cputime=17.189 memavail=3583304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85208.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25601 bytes_read=120357 bytes_retransmit=9 bytes_invalid=0 send_seq=1606 receive_seq=1606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=58.2 pwm=0.000 sysload=0.17 cputime=17.213 memavail=3583324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85209.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25607 bytes_read=120508 bytes_retransmit=9 bytes_invalid=0 send_seq=1607 receive_seq=1607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=58.2 pwm=0.000 sysload=0.17 cputime=17.237 memavail=3583324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85210.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25613 bytes_read=120689 bytes_retransmit=9 bytes_invalid=0 send_seq=1608 receive_seq=1608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=58.1 pwm=0.000 sysload=0.17 cputime=17.261 memavail=3583332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85211.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25619 bytes_read=120855 bytes_retransmit=9 bytes_invalid=0 send_seq=1609 receive_seq=1609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=58.1 pwm=0.000 sysload=0.17 cputime=17.287 memavail=3583336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85212.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25625 bytes_read=121020 bytes_retransmit=9 bytes_invalid=0 send_seq=1610 receive_seq=1610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=58.1 pwm=0.000 sysload=0.16 cputime=17.312 memavail=3583336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85213.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25631 bytes_read=121201 bytes_retransmit=9 bytes_invalid=0 send_seq=1611 receive_seq=1611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999526  heater_bed: target=0 temp=58.1 pwm=0.000 sysload=0.16 cputime=17.338 memavail=3582708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85214.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25637 bytes_read=121367 bytes_retransmit=9 bytes_invalid=0 send_seq=1612 receive_seq=1612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=58.1 pwm=0.000 sysload=0.16 cputime=17.361 memavail=3582708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85215.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25643 bytes_read=121533 bytes_retransmit=9 bytes_invalid=0 send_seq=1613 receive_seq=1613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.16 cputime=17.387 memavail=3582728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85216.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25649 bytes_read=121699 bytes_retransmit=9 bytes_invalid=0 send_seq=1614 receive_seq=1614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999526  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.16 cputime=17.411 memavail=3582728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85217.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25655 bytes_read=121869 bytes_retransmit=9 bytes_invalid=0 send_seq=1615 receive_seq=1615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.15 cputime=17.438 memavail=3582728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85218.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25661 bytes_read=122028 bytes_retransmit=9 bytes_invalid=0 send_seq=1616 receive_seq=1616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999529  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.15 cputime=17.464 memavail=3582728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85219.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25667 bytes_read=122194 bytes_retransmit=9 bytes_invalid=0 send_seq=1617 receive_seq=1617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.15 cputime=17.490 memavail=3582728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85220.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25673 bytes_read=122360 bytes_retransmit=9 bytes_invalid=0 send_seq=1618 receive_seq=1618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999528  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.15 cputime=17.516 memavail=3582728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85221.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25679 bytes_read=122526 bytes_retransmit=9 bytes_invalid=0 send_seq=1619 receive_seq=1619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999526  heater_bed: target=0 temp=57.9 pwm=0.000 sysload=0.15 cputime=17.542 memavail=3582728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85222.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25685 bytes_read=122706 bytes_retransmit=9 bytes_invalid=0 send_seq=1620 receive_seq=1620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=57.9 pwm=0.000 sysload=0.14 cputime=17.567 memavail=3582728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85223.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25691 bytes_read=122872 bytes_retransmit=9 bytes_invalid=0 send_seq=1621 receive_seq=1621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=57.9 pwm=0.000 sysload=0.14 cputime=17.592 memavail=3582732 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85224.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25697 bytes_read=123038 bytes_retransmit=9 bytes_invalid=0 send_seq=1622 receive_seq=1622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=57.9 pwm=0.000 sysload=0.14 cputime=17.616 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85225.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25703 bytes_read=123204 bytes_retransmit=9 bytes_invalid=0 send_seq=1623 receive_seq=1623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=57.8 pwm=0.000 sysload=0.14 cputime=17.640 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85226.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25709 bytes_read=123370 bytes_retransmit=9 bytes_invalid=0 send_seq=1624 receive_seq=1624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=57.8 pwm=0.000 sysload=0.14 cputime=17.665 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85227.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25715 bytes_read=123550 bytes_retransmit=9 bytes_invalid=0 send_seq=1625 receive_seq=1625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=57.8 pwm=0.000 sysload=0.12 cputime=17.690 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85228.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25721 bytes_read=123716 bytes_retransmit=9 bytes_invalid=0 send_seq=1626 receive_seq=1626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=57.8 pwm=0.000 sysload=0.12 cputime=17.715 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85229.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25727 bytes_read=123882 bytes_retransmit=9 bytes_invalid=0 send_seq=1627 receive_seq=1627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=57.7 pwm=0.000 sysload=0.12 cputime=17.741 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85230.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25733 bytes_read=124048 bytes_retransmit=9 bytes_invalid=0 send_seq=1628 receive_seq=1628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=57.7 pwm=0.000 sysload=0.12 cputime=17.765 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85231.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25739 bytes_read=124214 bytes_retransmit=9 bytes_invalid=0 send_seq=1629 receive_seq=1629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=57.7 pwm=0.000 sysload=0.12 cputime=17.790 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85232.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25745 bytes_read=124394 bytes_retransmit=9 bytes_invalid=0 send_seq=1630 receive_seq=1630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999524  heater_bed: target=0 temp=57.7 pwm=0.000 sysload=0.11 cputime=17.817 memavail=3582748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85233.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25751 bytes_read=124560 bytes_retransmit=9 bytes_invalid=0 send_seq=1631 receive_seq=1631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999535  heater_bed: target=0 temp=57.7 pwm=0.000 sysload=0.11 cputime=17.841 memavail=3582380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85234.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25757 bytes_read=124726 bytes_retransmit=9 bytes_invalid=0 send_seq=1632 receive_seq=1632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999535  heater_bed: target=0 temp=57.6 pwm=0.000 sysload=0.11 cputime=17.866 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85235.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25763 bytes_read=124892 bytes_retransmit=9 bytes_invalid=0 send_seq=1633 receive_seq=1633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=57.6 pwm=0.000 sysload=0.11 cputime=17.892 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85236.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25769 bytes_read=125058 bytes_retransmit=9 bytes_invalid=0 send_seq=1634 receive_seq=1634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999532  heater_bed: target=0 temp=57.6 pwm=0.000 sysload=0.11 cputime=17.917 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85237.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25775 bytes_read=125238 bytes_retransmit=9 bytes_invalid=0 send_seq=1635 receive_seq=1635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999530  heater_bed: target=0 temp=57.6 pwm=0.000 sysload=0.10 cputime=17.942 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85238.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25781 bytes_read=125404 bytes_retransmit=9 bytes_invalid=0 send_seq=1636 receive_seq=1636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=57.5 pwm=0.000 sysload=0.10 cputime=17.966 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85239.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25787 bytes_read=125570 bytes_retransmit=9 bytes_invalid=0 send_seq=1637 receive_seq=1637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999525  heater_bed: target=0 temp=57.5 pwm=0.000 sysload=0.10 cputime=17.990 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85240.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25801 bytes_read=125741 bytes_retransmit=9 bytes_invalid=0 send_seq=1639 receive_seq=1639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999523  heater_bed: target=0 temp=57.5 pwm=0.000 sysload=0.10 cputime=18.016 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85241.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25853 bytes_read=125902 bytes_retransmit=9 bytes_invalid=0 send_seq=1641 receive_seq=1641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=57.5 pwm=0.000 sysload=0.10 cputime=18.041 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85242.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=25859 bytes_read=126077 bytes_retransmit=9 bytes_invalid=0 send_seq=1642 receive_seq=1642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=57.5 pwm=0.000 sysload=0.10 cputime=18.066 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85243.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=25865 bytes_read=126243 bytes_retransmit=9 bytes_invalid=0 send_seq=1643 receive_seq=1643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999519  heater_bed: target=0 temp=57.4 pwm=0.000 sysload=0.10 cputime=18.090 memavail=3582392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85244.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=25871 bytes_read=126409 bytes_retransmit=9 bytes_invalid=0 send_seq=1644 receive_seq=1644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=57.4 pwm=0.000 sysload=0.10 cputime=18.114 memavail=3582284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85245.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=25877 bytes_read=126575 bytes_retransmit=9 bytes_invalid=0 send_seq=1645 receive_seq=1645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999521  heater_bed: target=0 temp=57.4 pwm=0.000 sysload=0.10 cputime=18.140 memavail=3582284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85246.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=25883 bytes_read=126756 bytes_retransmit=9 bytes_invalid=0 send_seq=1646 receive_seq=1646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999518  heater_bed: target=0 temp=57.4 pwm=0.000 sysload=0.10 cputime=18.168 memavail=3582284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85247.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25889 bytes_read=126921 bytes_retransmit=9 bytes_invalid=0 send_seq=1647 receive_seq=1647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=57.4 pwm=0.000 sysload=0.09 cputime=18.194 memavail=3582284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85248.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25895 bytes_read=127087 bytes_retransmit=9 bytes_invalid=0 send_seq=1648 receive_seq=1648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=57.3 pwm=0.000 sysload=0.09 cputime=18.220 memavail=3582284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85249.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25901 bytes_read=127268 bytes_retransmit=9 bytes_invalid=0 send_seq=1649 receive_seq=1649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=57.3 pwm=0.000 sysload=0.09 cputime=18.244 memavail=3582284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85250.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25907 bytes_read=127419 bytes_retransmit=9 bytes_invalid=0 send_seq=1650 receive_seq=1650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999520  heater_bed: target=0 temp=57.3 pwm=0.000 sysload=0.09 cputime=18.269 memavail=3582284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85251.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25913 bytes_read=127585 bytes_retransmit=9 bytes_invalid=0 send_seq=1651 receive_seq=1651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.09 cputime=18.294 memavail=3582288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85252.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25925 bytes_read=127780 bytes_retransmit=9 bytes_invalid=0 send_seq=1653 receive_seq=1652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999517  heater_bed: target=0 temp=57.3 pwm=0.000 sysload=0.08 cputime=18.321 memavail=3582288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85253.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25931 bytes_read=127947 bytes_retransmit=9 bytes_invalid=0 send_seq=1654 receive_seq=1654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.08 cputime=18.345 memavail=3582288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85254.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25937 bytes_read=128113 bytes_retransmit=9 bytes_invalid=0 send_seq=1655 receive_seq=1655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.08 cputime=18.370 memavail=3582296 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85255.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25943 bytes_read=128294 bytes_retransmit=9 bytes_invalid=0 send_seq=1656 receive_seq=1656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.08 cputime=18.396 memavail=3582296 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85256.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25949 bytes_read=128445 bytes_retransmit=9 bytes_invalid=0 send_seq=1657 receive_seq=1657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999510  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.08 cputime=18.421 memavail=3582172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85257.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25955 bytes_read=128625 bytes_retransmit=9 bytes_invalid=0 send_seq=1658 receive_seq=1658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.07 cputime=18.446 memavail=3582172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85258.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25961 bytes_read=128806 bytes_retransmit=9 bytes_invalid=0 send_seq=1659 receive_seq=1659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999511  heater_bed: target=0 temp=57.1 pwm=0.000 sysload=0.07 cputime=18.474 memavail=3582172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85259.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25967 bytes_read=128957 bytes_retransmit=9 bytes_invalid=0 send_seq=1660 receive_seq=1660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=57.1 pwm=0.000 sysload=0.07 cputime=18.499 memavail=3582172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85260.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25973 bytes_read=129138 bytes_retransmit=9 bytes_invalid=0 send_seq=1661 receive_seq=1661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999508  heater_bed: target=0 temp=57.1 pwm=0.000 sysload=0.07 cputime=18.527 memavail=3582172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85261.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25979 bytes_read=129304 bytes_retransmit=9 bytes_invalid=0 send_seq=1662 receive_seq=1662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=57.0 pwm=0.000 sysload=0.07 cputime=18.552 memavail=3582172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85262.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25985 bytes_read=129469 bytes_retransmit=9 bytes_invalid=0 send_seq=1663 receive_seq=1663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999505  heater_bed: target=0 temp=57.0 pwm=0.000 sysload=0.07 cputime=18.579 memavail=3582180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85263.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25991 bytes_read=129650 bytes_retransmit=9 bytes_invalid=0 send_seq=1664 receive_seq=1664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999505  heater_bed: target=0 temp=57.0 pwm=0.000 sysload=0.07 cputime=18.602 memavail=3582180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85264.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=25997 bytes_read=129813 bytes_retransmit=9 bytes_invalid=0 send_seq=1665 receive_seq=1665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999504  heater_bed: target=0 temp=57.0 pwm=0.000 sysload=0.07 cputime=18.626 memavail=3582180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85265.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26003 bytes_read=129953 bytes_retransmit=9 bytes_invalid=0 send_seq=1666 receive_seq=1666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999502  heater_bed: target=0 temp=57.0 pwm=0.000 sysload=0.07 cputime=18.650 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85266.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26009 bytes_read=130131 bytes_retransmit=9 bytes_invalid=0 send_seq=1667 receive_seq=1667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=0.07 cputime=18.675 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85267.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26015 bytes_read=130311 bytes_retransmit=9 bytes_invalid=0 send_seq=1668 receive_seq=1668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=0.06 cputime=18.700 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85268.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26021 bytes_read=130462 bytes_retransmit=9 bytes_invalid=0 send_seq=1669 receive_seq=1669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=0.06 cputime=18.725 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85269.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26027 bytes_read=130643 bytes_retransmit=9 bytes_invalid=0 send_seq=1670 receive_seq=1670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=0.06 cputime=18.752 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85270.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26033 bytes_read=130809 bytes_retransmit=9 bytes_invalid=0 send_seq=1671 receive_seq=1671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=0.06 cputime=18.778 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85271.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26039 bytes_read=130960 bytes_retransmit=9 bytes_invalid=0 send_seq=1672 receive_seq=1672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=0.06 cputime=18.803 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85272.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26045 bytes_read=131155 bytes_retransmit=9 bytes_invalid=0 send_seq=1673 receive_seq=1673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=0.06 cputime=18.828 memavail=3582184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85273.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26051 bytes_read=131321 bytes_retransmit=9 bytes_invalid=0 send_seq=1674 receive_seq=1674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=0.06 cputime=18.852 memavail=3582224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85274.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26057 bytes_read=131472 bytes_retransmit=9 bytes_invalid=0 send_seq=1675 receive_seq=1675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999496  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=0.06 cputime=18.877 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85275.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26063 bytes_read=131653 bytes_retransmit=9 bytes_invalid=0 send_seq=1676 receive_seq=1676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=0.06 cputime=18.903 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85276.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26069 bytes_read=131819 bytes_retransmit=9 bytes_invalid=0 send_seq=1677 receive_seq=1677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999494  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=0.06 cputime=18.928 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85277.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26075 bytes_read=131984 bytes_retransmit=9 bytes_invalid=0 send_seq=1678 receive_seq=1678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999494  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=0.05 cputime=18.952 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85278.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26081 bytes_read=132165 bytes_retransmit=9 bytes_invalid=0 send_seq=1679 receive_seq=1679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=0.05 cputime=18.977 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85279.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26087 bytes_read=132331 bytes_retransmit=9 bytes_invalid=0 send_seq=1680 receive_seq=1680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=0.05 cputime=19.003 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85280.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26093 bytes_read=132482 bytes_retransmit=9 bytes_invalid=0 send_seq=1681 receive_seq=1681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999499  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=0.05 cputime=19.028 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85281.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26099 bytes_read=132663 bytes_retransmit=9 bytes_invalid=0 send_seq=1682 receive_seq=1682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999498  heater_bed: target=0 temp=56.6 pwm=0.000 sysload=0.05 cputime=19.054 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85282.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26105 bytes_read=132843 bytes_retransmit=9 bytes_invalid=0 send_seq=1683 receive_seq=1683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=56.6 pwm=0.000 sysload=0.05 cputime=19.080 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85283.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26111 bytes_read=132994 bytes_retransmit=9 bytes_invalid=0 send_seq=1684 receive_seq=1684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=56.6 pwm=0.000 sysload=0.05 cputime=19.105 memavail=3583220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85284.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26117 bytes_read=133175 bytes_retransmit=9 bytes_invalid=0 send_seq=1685 receive_seq=1685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.05 cputime=19.131 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85285.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26123 bytes_read=133341 bytes_retransmit=9 bytes_invalid=0 send_seq=1686 receive_seq=1686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.05 cputime=19.157 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85286.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26129 bytes_read=133492 bytes_retransmit=9 bytes_invalid=0 send_seq=1687 receive_seq=1687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.05 cputime=19.184 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85287.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26135 bytes_read=133687 bytes_retransmit=9 bytes_invalid=0 send_seq=1688 receive_seq=1688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999502  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.12 cputime=19.210 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85288.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26158 bytes_read=133855 bytes_retransmit=9 bytes_invalid=0 send_seq=1690 receive_seq=1690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.12 cputime=19.238 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85289.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26201 bytes_read=134015 bytes_retransmit=9 bytes_invalid=0 send_seq=1692 receive_seq=1692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.12 cputime=19.265 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85290.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26207 bytes_read=134179 bytes_retransmit=9 bytes_invalid=0 send_seq=1693 receive_seq=1693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999510  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.12 cputime=19.289 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85291.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26213 bytes_read=134345 bytes_retransmit=9 bytes_invalid=0 send_seq=1694 receive_seq=1694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.12 cputime=19.315 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85292.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=26219 bytes_read=134526 bytes_retransmit=9 bytes_invalid=0 send_seq=1695 receive_seq=1695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999506  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.11 cputime=19.342 memavail=3583348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85293.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=26225 bytes_read=134692 bytes_retransmit=9 bytes_invalid=0 send_seq=1696 receive_seq=1696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.11 cputime=19.366 memavail=3584344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85294.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=26231 bytes_read=134858 bytes_retransmit=9 bytes_invalid=0 send_seq=1697 receive_seq=1697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999506  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.11 cputime=19.391 memavail=3584364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85295.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=26237 bytes_read=135024 bytes_retransmit=9 bytes_invalid=0 send_seq=1698 receive_seq=1698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999505  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.11 cputime=19.416 memavail=3584364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85296.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=26243 bytes_read=135190 bytes_retransmit=9 bytes_invalid=0 send_seq=1699 receive_seq=1699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999504  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=0.11 cputime=19.441 memavail=3584364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85297.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26249 bytes_read=135370 bytes_retransmit=9 bytes_invalid=0 send_seq=1700 receive_seq=1700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999505  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=0.10 cputime=19.467 memavail=3584372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85298.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26255 bytes_read=135536 bytes_retransmit=9 bytes_invalid=0 send_seq=1701 receive_seq=1701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999504  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=0.10 cputime=19.494 memavail=3584372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85299.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26261 bytes_read=135702 bytes_retransmit=9 bytes_invalid=0 send_seq=1702 receive_seq=1702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=0.10 cputime=19.520 memavail=3584372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85300.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26267 bytes_read=135868 bytes_retransmit=9 bytes_invalid=0 send_seq=1703 receive_seq=1703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=56.2 pwm=0.000 sysload=0.10 cputime=19.546 memavail=3584372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85301.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26273 bytes_read=136034 bytes_retransmit=9 bytes_invalid=0 send_seq=1704 receive_seq=1704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999500  heater_bed: target=0 temp=56.2 pwm=0.000 sysload=0.10 cputime=19.571 memavail=3584372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85302.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26279 bytes_read=136214 bytes_retransmit=9 bytes_invalid=0 send_seq=1705 receive_seq=1705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=56.2 pwm=0.000 sysload=0.10 cputime=19.596 memavail=3584372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85303.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26285 bytes_read=136380 bytes_retransmit=9 bytes_invalid=0 send_seq=1706 receive_seq=1706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999495  heater_bed: target=0 temp=56.2 pwm=0.000 sysload=0.10 cputime=19.620 memavail=3583364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85304.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26291 bytes_read=136546 bytes_retransmit=9 bytes_invalid=0 send_seq=1707 receive_seq=1707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999493  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.10 cputime=19.644 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85305.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26297 bytes_read=136712 bytes_retransmit=9 bytes_invalid=0 send_seq=1708 receive_seq=1708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999491  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.10 cputime=19.670 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85306.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26303 bytes_read=136878 bytes_retransmit=9 bytes_invalid=0 send_seq=1709 receive_seq=1709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.10 cputime=19.696 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85307.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26309 bytes_read=137058 bytes_retransmit=9 bytes_invalid=0 send_seq=1710 receive_seq=1710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999490  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.09 cputime=19.724 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85308.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26315 bytes_read=137224 bytes_retransmit=9 bytes_invalid=0 send_seq=1711 receive_seq=1711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.09 cputime=19.750 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85309.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26321 bytes_read=137390 bytes_retransmit=9 bytes_invalid=0 send_seq=1712 receive_seq=1712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999486  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.09 cputime=19.777 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85310.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26327 bytes_read=137556 bytes_retransmit=9 bytes_invalid=0 send_seq=1713 receive_seq=1713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=0.09 cputime=19.803 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85311.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26339 bytes_read=137722 bytes_retransmit=9 bytes_invalid=0 send_seq=1715 receive_seq=1714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=0.09 cputime=19.831 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85312.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26345 bytes_read=137912 bytes_retransmit=9 bytes_invalid=0 send_seq=1716 receive_seq=1716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999485  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=0.08 cputime=19.857 memavail=3583376 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85313.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26351 bytes_read=138068 bytes_retransmit=9 bytes_invalid=0 send_seq=1717 receive_seq=1717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999483  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=0.08 cputime=19.880 memavail=3582768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85314.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26357 bytes_read=138234 bytes_retransmit=9 bytes_invalid=0 send_seq=1718 receive_seq=1718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.08 cputime=19.902 memavail=3582884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85315.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26363 bytes_read=138400 bytes_retransmit=9 bytes_invalid=0 send_seq=1719 receive_seq=1719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.08 cputime=19.929 memavail=3582884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85316.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26369 bytes_read=138566 bytes_retransmit=9 bytes_invalid=0 send_seq=1720 receive_seq=1720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999487  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.08 cputime=19.955 memavail=3582884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85317.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26375 bytes_read=138746 bytes_retransmit=9 bytes_invalid=0 send_seq=1721 receive_seq=1721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999484  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.07 cputime=19.981 memavail=3582884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85318.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26381 bytes_read=138912 bytes_retransmit=9 bytes_invalid=0 send_seq=1722 receive_seq=1722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999484  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.07 cputime=20.007 memavail=3582884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85319.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26387 bytes_read=139078 bytes_retransmit=9 bytes_invalid=0 send_seq=1723 receive_seq=1723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999483  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.07 cputime=20.032 memavail=3582884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85320.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26393 bytes_read=139259 bytes_retransmit=9 bytes_invalid=0 send_seq=1724 receive_seq=1724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999481  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=0.07 cputime=20.058 memavail=3582760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85321.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26399 bytes_read=139410 bytes_retransmit=9 bytes_invalid=0 send_seq=1725 receive_seq=1725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999485  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=0.07 cputime=20.082 memavail=3582760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85322.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26405 bytes_read=139590 bytes_retransmit=9 bytes_invalid=0 send_seq=1726 receive_seq=1726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999485  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=0.07 cputime=20.106 memavail=3582760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85323.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26411 bytes_read=139771 bytes_retransmit=9 bytes_invalid=0 send_seq=1727 receive_seq=1727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999484  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=0.07 cputime=20.133 memavail=3582768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85324.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26417 bytes_read=139922 bytes_retransmit=9 bytes_invalid=0 send_seq=1728 receive_seq=1728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999484  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=0.07 cputime=20.160 memavail=3582908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85325.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26423 bytes_read=140088 bytes_retransmit=9 bytes_invalid=0 send_seq=1729 receive_seq=1729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999483  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=0.07 cputime=20.184 memavail=3582784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85326.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26429 bytes_read=140269 bytes_retransmit=9 bytes_invalid=0 send_seq=1730 receive_seq=1730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999481  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=0.07 cputime=20.209 memavail=3582788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85327.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26435 bytes_read=140434 bytes_retransmit=9 bytes_invalid=0 send_seq=1731 receive_seq=1731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999481  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=0.06 cputime=20.233 memavail=3582788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85328.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26441 bytes_read=140600 bytes_retransmit=9 bytes_invalid=0 send_seq=1732 receive_seq=1732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999479  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=0.06 cputime=20.257 memavail=3582788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85329.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26447 bytes_read=140781 bytes_retransmit=9 bytes_invalid=0 send_seq=1733 receive_seq=1733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999478  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.06 cputime=20.281 memavail=3582788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85330.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26453 bytes_read=140932 bytes_retransmit=9 bytes_invalid=0 send_seq=1734 receive_seq=1734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.06 cputime=20.306 memavail=3582788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85331.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26459 bytes_read=141113 bytes_retransmit=9 bytes_invalid=0 send_seq=1735 receive_seq=1735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.06 cputime=20.332 memavail=3582788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 85332.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26465 bytes_read=141293 bytes_retransmit=9 bytes_invalid=0 send_seq=1736 receive_seq=1736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999478  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.06 cputime=20.356 memavail=3582792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85333.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26471 bytes_read=141444 bytes_retransmit=9 bytes_invalid=0 send_seq=1737 receive_seq=1737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999479  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.06 cputime=20.380 memavail=3582228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85334.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26477 bytes_read=141625 bytes_retransmit=9 bytes_invalid=0 send_seq=1738 receive_seq=1738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.06 cputime=20.404 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85335.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26483 bytes_read=141791 bytes_retransmit=9 bytes_invalid=0 send_seq=1739 receive_seq=1739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.06 cputime=20.429 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85336.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26489 bytes_read=141936 bytes_retransmit=9 bytes_invalid=0 send_seq=1740 receive_seq=1740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.06 cputime=20.455 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85337.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26495 bytes_read=142121 bytes_retransmit=9 bytes_invalid=0 send_seq=1741 receive_seq=1741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.05 cputime=20.482 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85338.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26515 bytes_read=142292 bytes_retransmit=9 bytes_invalid=0 send_seq=1743 receive_seq=1743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.05 cputime=20.511 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85339.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26556 bytes_read=142448 bytes_retransmit=9 bytes_invalid=0 send_seq=1745 receive_seq=1745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=55.4 pwm=0.000 sysload=0.05 cputime=20.538 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85340.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26562 bytes_read=142629 bytes_retransmit=9 bytes_invalid=0 send_seq=1746 receive_seq=1746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999475  heater_bed: target=0 temp=55.4 pwm=0.000 sysload=0.05 cputime=20.564 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85341.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26568 bytes_read=142795 bytes_retransmit=9 bytes_invalid=0 send_seq=1747 receive_seq=1747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999475  heater_bed: target=0 temp=55.4 pwm=0.000 sysload=0.05 cputime=20.590 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85342.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=26574 bytes_read=142961 bytes_retransmit=9 bytes_invalid=0 send_seq=1748 receive_seq=1748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=55.4 pwm=0.000 sysload=0.05 cputime=20.616 memavail=3582292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85343.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=26580 bytes_read=143142 bytes_retransmit=9 bytes_invalid=0 send_seq=1749 receive_seq=1749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=55.4 pwm=0.000 sysload=0.05 cputime=20.641 memavail=3582300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85344.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=26586 bytes_read=143308 bytes_retransmit=9 bytes_invalid=0 send_seq=1750 receive_seq=1750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.05 cputime=20.665 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85345.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=26592 bytes_read=143459 bytes_retransmit=9 bytes_invalid=0 send_seq=1751 receive_seq=1751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.05 cputime=20.691 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85346.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=26598 bytes_read=143640 bytes_retransmit=9 bytes_invalid=0 send_seq=1752 receive_seq=1752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.05 cputime=20.717 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85347.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26604 bytes_read=143820 bytes_retransmit=9 bytes_invalid=0 send_seq=1753 receive_seq=1753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.04 cputime=20.743 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85348.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26610 bytes_read=143971 bytes_retransmit=9 bytes_invalid=0 send_seq=1754 receive_seq=1754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.04 cputime=20.769 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85349.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26616 bytes_read=144152 bytes_retransmit=9 bytes_invalid=0 send_seq=1755 receive_seq=1755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.04 cputime=20.795 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85350.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26622 bytes_read=144318 bytes_retransmit=9 bytes_invalid=0 send_seq=1756 receive_seq=1756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=55.2 pwm=0.000 sysload=0.04 cputime=20.821 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85351.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26628 bytes_read=144469 bytes_retransmit=9 bytes_invalid=0 send_seq=1757 receive_seq=1757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=55.2 pwm=0.000 sysload=0.04 cputime=20.846 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85352.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26634 bytes_read=144664 bytes_retransmit=9 bytes_invalid=0 send_seq=1758 receive_seq=1758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=55.2 pwm=0.000 sysload=0.04 cputime=20.871 memavail=3582312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85353.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26640 bytes_read=144830 bytes_retransmit=9 bytes_invalid=0 send_seq=1759 receive_seq=1759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=55.2 pwm=0.000 sysload=0.04 cputime=20.895 memavail=3582320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85354.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26646 bytes_read=144981 bytes_retransmit=9 bytes_invalid=0 send_seq=1760 receive_seq=1760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.04 cputime=20.919 memavail=3582324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85355.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26652 bytes_read=145162 bytes_retransmit=9 bytes_invalid=0 send_seq=1761 receive_seq=1761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999471  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.04 cputime=20.945 memavail=3582324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85356.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26658 bytes_read=145328 bytes_retransmit=9 bytes_invalid=0 send_seq=1762 receive_seq=1762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999471  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.04 cputime=20.972 memavail=3582324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85357.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26664 bytes_read=145508 bytes_retransmit=9 bytes_invalid=0 send_seq=1763 receive_seq=1763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999469  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.04 cputime=20.999 memavail=3582324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85358.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26670 bytes_read=145674 bytes_retransmit=9 bytes_invalid=0 send_seq=1764 receive_seq=1764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.04 cputime=21.026 memavail=3582324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85359.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26676 bytes_read=145840 bytes_retransmit=9 bytes_invalid=0 send_seq=1765 receive_seq=1765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.04 cputime=21.056 memavail=3582324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85360.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26682 bytes_read=145997 bytes_retransmit=9 bytes_invalid=0 send_seq=1766 receive_seq=1766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.04 cputime=21.083 memavail=3582328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85361.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26688 bytes_read=146156 bytes_retransmit=9 bytes_invalid=0 send_seq=1767 receive_seq=1767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.04 cputime=21.109 memavail=3582328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85362.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26694 bytes_read=146336 bytes_retransmit=9 bytes_invalid=0 send_seq=1768 receive_seq=1768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.03 cputime=21.136 memavail=3582328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85363.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26700 bytes_read=146502 bytes_retransmit=9 bytes_invalid=0 send_seq=1769 receive_seq=1769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.03 cputime=21.161 memavail=3582328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85364.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26706 bytes_read=146668 bytes_retransmit=9 bytes_invalid=0 send_seq=1770 receive_seq=1770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.9 pwm=0.000 sysload=0.03 cputime=21.187 memavail=3582328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85365.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26712 bytes_read=146834 bytes_retransmit=9 bytes_invalid=0 send_seq=1771 receive_seq=1771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.03 cputime=21.216 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85366.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26718 bytes_read=147000 bytes_retransmit=9 bytes_invalid=0 send_seq=1772 receive_seq=1772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.03 cputime=21.243 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85367.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26724 bytes_read=147180 bytes_retransmit=9 bytes_invalid=0 send_seq=1773 receive_seq=1773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.9 pwm=0.000 sysload=0.11 cputime=21.270 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85368.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26730 bytes_read=147346 bytes_retransmit=9 bytes_invalid=0 send_seq=1774 receive_seq=1774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=54.9 pwm=0.000 sysload=0.11 cputime=21.297 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85369.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26736 bytes_read=147512 bytes_retransmit=9 bytes_invalid=0 send_seq=1775 receive_seq=1775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.11 cputime=21.323 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85370.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26748 bytes_read=147694 bytes_retransmit=9 bytes_invalid=0 send_seq=1777 receive_seq=1777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=54.9 pwm=0.000 sysload=0.11 cputime=21.351 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85371.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26754 bytes_read=147860 bytes_retransmit=9 bytes_invalid=0 send_seq=1778 receive_seq=1778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.11 cputime=21.378 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85372.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26760 bytes_read=148040 bytes_retransmit=9 bytes_invalid=0 send_seq=1779 receive_seq=1779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.18 cputime=21.404 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85373.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26766 bytes_read=148206 bytes_retransmit=9 bytes_invalid=0 send_seq=1780 receive_seq=1780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.18 cputime=21.428 memavail=3581328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85374.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26772 bytes_read=148372 bytes_retransmit=9 bytes_invalid=0 send_seq=1781 receive_seq=1781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999458  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.18 cputime=21.444 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85375.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26778 bytes_read=148538 bytes_retransmit=9 bytes_invalid=0 send_seq=1782 receive_seq=1782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.18 cputime=21.470 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85376.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26784 bytes_read=148704 bytes_retransmit=9 bytes_invalid=0 send_seq=1783 receive_seq=1783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=54.7 pwm=0.000 sysload=0.18 cputime=21.497 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85377.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26790 bytes_read=148884 bytes_retransmit=9 bytes_invalid=0 send_seq=1784 receive_seq=1784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.7 pwm=0.000 sysload=0.17 cputime=21.523 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85378.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26796 bytes_read=149050 bytes_retransmit=9 bytes_invalid=0 send_seq=1785 receive_seq=1785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999470  heater_bed: target=0 temp=54.7 pwm=0.000 sysload=0.17 cputime=21.548 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85379.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26802 bytes_read=149216 bytes_retransmit=9 bytes_invalid=0 send_seq=1786 receive_seq=1786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=54.7 pwm=0.000 sysload=0.17 cputime=21.575 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85380.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26808 bytes_read=149382 bytes_retransmit=9 bytes_invalid=0 send_seq=1787 receive_seq=1787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=54.6 pwm=0.000 sysload=0.17 cputime=21.601 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85381.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26814 bytes_read=149548 bytes_retransmit=9 bytes_invalid=0 send_seq=1788 receive_seq=1788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=54.6 pwm=0.000 sysload=0.17 cputime=21.627 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85382.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26820 bytes_read=149728 bytes_retransmit=9 bytes_invalid=0 send_seq=1789 receive_seq=1789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=54.6 pwm=0.000 sysload=0.15 cputime=21.653 memavail=3581332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85383.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26826 bytes_read=149894 bytes_retransmit=9 bytes_invalid=0 send_seq=1790 receive_seq=1790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.15 cputime=21.679 memavail=3581316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85384.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26832 bytes_read=150049 bytes_retransmit=9 bytes_invalid=0 send_seq=1791 receive_seq=1791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.15 cputime=21.705 memavail=3581316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85385.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26838 bytes_read=150224 bytes_retransmit=9 bytes_invalid=0 send_seq=1792 receive_seq=1792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999469  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.15 cputime=21.731 memavail=3581336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85386.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26844 bytes_read=150375 bytes_retransmit=9 bytes_invalid=0 send_seq=1793 receive_seq=1793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999471  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.15 cputime=21.756 memavail=3581336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85387.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26850 bytes_read=150555 bytes_retransmit=9 bytes_invalid=0 send_seq=1794 receive_seq=1794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999468  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.14 cputime=21.784 memavail=3581336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85388.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26864 bytes_read=150741 bytes_retransmit=9 bytes_invalid=0 send_seq=1796 receive_seq=1796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.14 cputime=21.812 memavail=3581336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85389.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26916 bytes_read=150897 bytes_retransmit=9 bytes_invalid=0 send_seq=1798 receive_seq=1798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.14 cputime=21.838 memavail=3581336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85390.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26922 bytes_read=151063 bytes_retransmit=9 bytes_invalid=0 send_seq=1799 receive_seq=1799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=54.4 pwm=0.000 sysload=0.14 cputime=21.863 memavail=3581340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85391.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26928 bytes_read=151244 bytes_retransmit=9 bytes_invalid=0 send_seq=1800 receive_seq=1800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=54.4 pwm=0.000 sysload=0.14 cputime=21.889 memavail=3581340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85392.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=26934 bytes_read=151410 bytes_retransmit=9 bytes_invalid=0 send_seq=1801 receive_seq=1801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=54.4 pwm=0.000 sysload=0.13 cputime=21.915 memavail=3581340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85393.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=26940 bytes_read=151576 bytes_retransmit=9 bytes_invalid=0 send_seq=1802 receive_seq=1802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=54.4 pwm=0.000 sysload=0.13 cputime=21.940 memavail=3580840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85394.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=26946 bytes_read=151757 bytes_retransmit=9 bytes_invalid=0 send_seq=1803 receive_seq=1803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=54.4 pwm=0.000 sysload=0.13 cputime=21.966 memavail=3580844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85395.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=26952 bytes_read=151908 bytes_retransmit=9 bytes_invalid=0 send_seq=1804 receive_seq=1804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.13 cputime=21.992 memavail=3580844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85396.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=26958 bytes_read=152074 bytes_retransmit=9 bytes_invalid=0 send_seq=1805 receive_seq=1805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.13 cputime=22.018 memavail=3580844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85397.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26964 bytes_read=152269 bytes_retransmit=9 bytes_invalid=0 send_seq=1806 receive_seq=1806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.12 cputime=22.046 memavail=3580844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85398.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26970 bytes_read=152420 bytes_retransmit=9 bytes_invalid=0 send_seq=1807 receive_seq=1807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.12 cputime=22.073 memavail=3580844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85399.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26976 bytes_read=152601 bytes_retransmit=9 bytes_invalid=0 send_seq=1808 receive_seq=1808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.12 cputime=22.099 memavail=3580844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85400.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26982 bytes_read=152767 bytes_retransmit=9 bytes_invalid=0 send_seq=1809 receive_seq=1809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.12 cputime=22.124 memavail=3580844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85401.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26988 bytes_read=152918 bytes_retransmit=9 bytes_invalid=0 send_seq=1810 receive_seq=1810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.12 cputime=22.151 memavail=3580844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85402.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=26994 bytes_read=153113 bytes_retransmit=9 bytes_invalid=0 send_seq=1811 receive_seq=1811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.11 cputime=22.178 memavail=3580848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85403.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27000 bytes_read=153279 bytes_retransmit=9 bytes_invalid=0 send_seq=1812 receive_seq=1812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.11 cputime=22.205 memavail=3580384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85404.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27006 bytes_read=153430 bytes_retransmit=9 bytes_invalid=0 send_seq=1813 receive_seq=1813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.11 cputime=22.230 memavail=3580476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85405.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27012 bytes_read=153611 bytes_retransmit=9 bytes_invalid=0 send_seq=1814 receive_seq=1814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.11 cputime=22.257 memavail=3580476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85406.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27018 bytes_read=153777 bytes_retransmit=9 bytes_invalid=0 send_seq=1815 receive_seq=1815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.11 cputime=22.283 memavail=3580476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85407.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27024 bytes_read=153940 bytes_retransmit=9 bytes_invalid=0 send_seq=1816 receive_seq=1816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.10 cputime=22.308 memavail=3580476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85408.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27030 bytes_read=154109 bytes_retransmit=9 bytes_invalid=0 send_seq=1817 receive_seq=1817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.10 cputime=22.334 memavail=3580476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85409.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27036 bytes_read=154272 bytes_retransmit=9 bytes_invalid=0 send_seq=1818 receive_seq=1818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.10 cputime=22.360 memavail=3580476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85410.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27042 bytes_read=154423 bytes_retransmit=9 bytes_invalid=0 send_seq=1819 receive_seq=1819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.10 cputime=22.385 memavail=3580476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85411.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27048 bytes_read=154604 bytes_retransmit=9 bytes_invalid=0 send_seq=1820 receive_seq=1820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.10 cputime=22.411 memavail=3580352 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85412.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27054 bytes_read=154784 bytes_retransmit=9 bytes_invalid=0 send_seq=1821 receive_seq=1821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.09 cputime=22.438 memavail=3580352 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85413.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27060 bytes_read=154935 bytes_retransmit=9 bytes_invalid=0 send_seq=1822 receive_seq=1822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.09 cputime=22.463 memavail=3580332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85414.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27066 bytes_read=155116 bytes_retransmit=9 bytes_invalid=0 send_seq=1823 receive_seq=1823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.09 cputime=22.489 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85415.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27072 bytes_read=155282 bytes_retransmit=9 bytes_invalid=0 send_seq=1824 receive_seq=1824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999458  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.09 cputime=22.514 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85416.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27078 bytes_read=155433 bytes_retransmit=9 bytes_invalid=0 send_seq=1825 receive_seq=1825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.09 cputime=22.540 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85417.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27084 bytes_read=155628 bytes_retransmit=9 bytes_invalid=0 send_seq=1826 receive_seq=1826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.08 cputime=22.567 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85418.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27090 bytes_read=155794 bytes_retransmit=9 bytes_invalid=0 send_seq=1827 receive_seq=1827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.08 cputime=22.593 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85419.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27096 bytes_read=155945 bytes_retransmit=9 bytes_invalid=0 send_seq=1828 receive_seq=1828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.08 cputime=22.619 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85420.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27102 bytes_read=156126 bytes_retransmit=9 bytes_invalid=0 send_seq=1829 receive_seq=1829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.08 cputime=22.646 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85421.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27108 bytes_read=156292 bytes_retransmit=9 bytes_invalid=0 send_seq=1830 receive_seq=1830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.08 cputime=22.671 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85422.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27114 bytes_read=156457 bytes_retransmit=9 bytes_invalid=0 send_seq=1831 receive_seq=1831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.08 cputime=22.697 memavail=3580484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85423.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27120 bytes_read=156638 bytes_retransmit=9 bytes_invalid=0 send_seq=1832 receive_seq=1832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=53.8 pwm=0.000 sysload=0.08 cputime=22.722 memavail=3580400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85424.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27126 bytes_read=156804 bytes_retransmit=9 bytes_invalid=0 send_seq=1833 receive_seq=1833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=53.8 pwm=0.000 sysload=0.08 cputime=22.747 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85425.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27132 bytes_read=156955 bytes_retransmit=9 bytes_invalid=0 send_seq=1834 receive_seq=1834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=53.8 pwm=0.000 sysload=0.08 cputime=22.774 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85426.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27138 bytes_read=157136 bytes_retransmit=9 bytes_invalid=0 send_seq=1835 receive_seq=1835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=53.8 pwm=0.000 sysload=0.08 cputime=22.800 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85427.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27144 bytes_read=157316 bytes_retransmit=9 bytes_invalid=0 send_seq=1836 receive_seq=1836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=53.7 pwm=0.000 sysload=0.07 cputime=22.826 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85428.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27156 bytes_read=157498 bytes_retransmit=9 bytes_invalid=0 send_seq=1838 receive_seq=1838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=53.7 pwm=0.000 sysload=0.07 cputime=22.852 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85429.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27162 bytes_read=157664 bytes_retransmit=9 bytes_invalid=0 send_seq=1839 receive_seq=1839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=53.7 pwm=0.000 sysload=0.07 cputime=22.877 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85430.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27168 bytes_read=157830 bytes_retransmit=9 bytes_invalid=0 send_seq=1840 receive_seq=1840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999468  heater_bed: target=0 temp=53.7 pwm=0.000 sysload=0.07 cputime=22.904 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85431.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27174 bytes_read=157991 bytes_retransmit=9 bytes_invalid=0 send_seq=1841 receive_seq=1841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999469  heater_bed: target=0 temp=53.7 pwm=0.000 sysload=0.07 cputime=22.930 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85432.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27180 bytes_read=158160 bytes_retransmit=9 bytes_invalid=0 send_seq=1842 receive_seq=1842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.06 cputime=22.954 memavail=3580500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85433.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27186 bytes_read=158325 bytes_retransmit=9 bytes_invalid=0 send_seq=1843 receive_seq=1843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999470  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.06 cputime=22.979 memavail=3580128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85434.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27192 bytes_read=158491 bytes_retransmit=9 bytes_invalid=0 send_seq=1844 receive_seq=1844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.06 cputime=23.003 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85435.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27198 bytes_read=158657 bytes_retransmit=9 bytes_invalid=0 send_seq=1845 receive_seq=1845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.06 cputime=23.028 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85436.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27204 bytes_read=158823 bytes_retransmit=9 bytes_invalid=0 send_seq=1846 receive_seq=1846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.06 cputime=23.054 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85437.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27210 bytes_read=159003 bytes_retransmit=9 bytes_invalid=0 send_seq=1847 receive_seq=1847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999462  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.06 cputime=23.080 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85438.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27216 bytes_read=159169 bytes_retransmit=9 bytes_invalid=0 send_seq=1848 receive_seq=1848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.06 cputime=23.107 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85439.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27222 bytes_read=159335 bytes_retransmit=9 bytes_invalid=0 send_seq=1849 receive_seq=1849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=53.5 pwm=0.000 sysload=0.06 cputime=23.133 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85440.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27228 bytes_read=159501 bytes_retransmit=9 bytes_invalid=0 send_seq=1850 receive_seq=1850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=53.5 pwm=0.000 sysload=0.06 cputime=23.158 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85441.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27234 bytes_read=159667 bytes_retransmit=9 bytes_invalid=0 send_seq=1851 receive_seq=1851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999467  heater_bed: target=0 temp=53.5 pwm=0.000 sysload=0.06 cputime=23.185 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85442.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=27294 bytes_read=159858 bytes_retransmit=9 bytes_invalid=0 send_seq=1854 receive_seq=1854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=53.5 pwm=0.000 sysload=0.05 cputime=23.215 memavail=3580132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85443.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=27300 bytes_read=160024 bytes_retransmit=9 bytes_invalid=0 send_seq=1855 receive_seq=1855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.05 cputime=23.239 memavail=3580384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85444.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=27306 bytes_read=160190 bytes_retransmit=9 bytes_invalid=0 send_seq=1856 receive_seq=1856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.05 cputime=23.267 memavail=3580400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85445.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=27312 bytes_read=160356 bytes_retransmit=9 bytes_invalid=0 send_seq=1857 receive_seq=1857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.05 cputime=23.293 memavail=3580400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85446.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=27318 bytes_read=160522 bytes_retransmit=9 bytes_invalid=0 send_seq=1858 receive_seq=1858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.05 cputime=23.318 memavail=3580400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85447.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27324 bytes_read=160702 bytes_retransmit=9 bytes_invalid=0 send_seq=1859 receive_seq=1859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.05 cputime=23.344 memavail=3580400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85448.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27330 bytes_read=160868 bytes_retransmit=9 bytes_invalid=0 send_seq=1860 receive_seq=1860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.05 cputime=23.369 memavail=3580400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85449.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27336 bytes_read=161034 bytes_retransmit=9 bytes_invalid=0 send_seq=1861 receive_seq=1861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.05 cputime=23.395 memavail=3580408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85450.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27342 bytes_read=161200 bytes_retransmit=9 bytes_invalid=0 send_seq=1862 receive_seq=1862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.05 cputime=23.422 memavail=3580408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85451.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27348 bytes_read=161366 bytes_retransmit=9 bytes_invalid=0 send_seq=1863 receive_seq=1863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.05 cputime=23.448 memavail=3580408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85452.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27354 bytes_read=161546 bytes_retransmit=9 bytes_invalid=0 send_seq=1864 receive_seq=1864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999458  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.05 cputime=23.476 memavail=3580408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85453.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27360 bytes_read=161712 bytes_retransmit=9 bytes_invalid=0 send_seq=1865 receive_seq=1865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.05 cputime=23.503 memavail=3580408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85454.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27366 bytes_read=161878 bytes_retransmit=9 bytes_invalid=0 send_seq=1866 receive_seq=1866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.05 cputime=23.527 memavail=3580412 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85455.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27372 bytes_read=162039 bytes_retransmit=9 bytes_invalid=0 send_seq=1867 receive_seq=1867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.05 cputime=23.553 memavail=3580416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85456.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27378 bytes_read=162194 bytes_retransmit=9 bytes_invalid=0 send_seq=1868 receive_seq=1868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.05 cputime=23.579 memavail=3580416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85457.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27384 bytes_read=162374 bytes_retransmit=9 bytes_invalid=0 send_seq=1869 receive_seq=1869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.04 cputime=23.606 memavail=3580416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85458.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27390 bytes_read=162540 bytes_retransmit=9 bytes_invalid=0 send_seq=1870 receive_seq=1870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.04 cputime=23.635 memavail=3580416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85459.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27396 bytes_read=162721 bytes_retransmit=9 bytes_invalid=0 send_seq=1871 receive_seq=1871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.04 cputime=23.664 memavail=3580416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85460.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27402 bytes_read=162872 bytes_retransmit=9 bytes_invalid=0 send_seq=1872 receive_seq=1872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=53.1 pwm=0.000 sysload=0.04 cputime=23.690 memavail=3580416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85461.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27408 bytes_read=163038 bytes_retransmit=9 bytes_invalid=0 send_seq=1873 receive_seq=1873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.04 cputime=23.718 memavail=3580416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85462.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27414 bytes_read=163233 bytes_retransmit=9 bytes_invalid=0 send_seq=1874 receive_seq=1874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999458  heater_bed: target=0 temp=53.1 pwm=0.000 sysload=0.04 cputime=23.741 memavail=3580416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85463.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27420 bytes_read=163384 bytes_retransmit=9 bytes_invalid=0 send_seq=1875 receive_seq=1875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=53.1 pwm=0.000 sysload=0.04 cputime=23.767 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85464.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27426 bytes_read=163550 bytes_retransmit=9 bytes_invalid=0 send_seq=1876 receive_seq=1876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=53.1 pwm=0.000 sysload=0.04 cputime=23.792 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85465.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27432 bytes_read=163731 bytes_retransmit=9 bytes_invalid=0 send_seq=1877 receive_seq=1877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=53.1 pwm=0.000 sysload=0.04 cputime=23.818 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85466.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27438 bytes_read=163882 bytes_retransmit=9 bytes_invalid=0 send_seq=1878 receive_seq=1878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.04 cputime=23.844 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85467.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27444 bytes_read=164062 bytes_retransmit=9 bytes_invalid=0 send_seq=1879 receive_seq=1879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.04 cputime=23.869 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85468.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27450 bytes_read=164243 bytes_retransmit=9 bytes_invalid=0 send_seq=1880 receive_seq=1880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.04 cputime=23.898 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85469.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27456 bytes_read=164394 bytes_retransmit=9 bytes_invalid=0 send_seq=1881 receive_seq=1881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999475  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.04 cputime=23.922 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85470.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27462 bytes_read=164560 bytes_retransmit=9 bytes_invalid=0 send_seq=1882 receive_seq=1882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.04 cputime=23.947 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85471.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27468 bytes_read=164741 bytes_retransmit=9 bytes_invalid=0 send_seq=1883 receive_seq=1883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.04 cputime=23.973 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85472.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27474 bytes_read=164906 bytes_retransmit=9 bytes_invalid=0 send_seq=1884 receive_seq=1884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.03 cputime=23.999 memavail=3580420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85473.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27480 bytes_read=165072 bytes_retransmit=9 bytes_invalid=0 send_seq=1885 receive_seq=1885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999471  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.03 cputime=24.026 memavail=3580428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85474.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27486 bytes_read=165253 bytes_retransmit=9 bytes_invalid=0 send_seq=1886 receive_seq=1886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999469  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.03 cputime=24.051 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85475.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27492 bytes_read=165404 bytes_retransmit=9 bytes_invalid=0 send_seq=1887 receive_seq=1887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999468  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.03 cputime=24.076 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85476.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27498 bytes_read=165570 bytes_retransmit=9 bytes_invalid=0 send_seq=1888 receive_seq=1888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.03 cputime=24.103 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85477.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27504 bytes_read=165765 bytes_retransmit=9 bytes_invalid=0 send_seq=1889 receive_seq=1889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999463  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.03 cputime=24.129 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85478.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27510 bytes_read=165916 bytes_retransmit=9 bytes_invalid=0 send_seq=1890 receive_seq=1890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.03 cputime=24.155 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85479.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27516 bytes_read=166089 bytes_retransmit=9 bytes_invalid=0 send_seq=1891 receive_seq=1891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.03 cputime=24.181 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85480.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27522 bytes_read=166247 bytes_retransmit=9 bytes_invalid=0 send_seq=1892 receive_seq=1892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999457  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.03 cputime=24.208 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85481.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27528 bytes_read=166398 bytes_retransmit=9 bytes_invalid=0 send_seq=1893 receive_seq=1893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.03 cputime=24.234 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85482.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27534 bytes_read=166593 bytes_retransmit=9 bytes_invalid=0 send_seq=1894 receive_seq=1894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.03 cputime=24.261 memavail=3580464 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85483.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27540 bytes_read=166759 bytes_retransmit=9 bytes_invalid=0 send_seq=1895 receive_seq=1895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=0.03 cputime=24.288 memavail=3580656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85484.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27546 bytes_read=166910 bytes_retransmit=9 bytes_invalid=0 send_seq=1896 receive_seq=1896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999453  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=0.03 cputime=24.313 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85485.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27552 bytes_read=167091 bytes_retransmit=9 bytes_invalid=0 send_seq=1897 receive_seq=1897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999455  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=0.03 cputime=24.339 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85486.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27558 bytes_read=167257 bytes_retransmit=9 bytes_invalid=0 send_seq=1898 receive_seq=1898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999455  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=0.03 cputime=24.366 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85487.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27564 bytes_read=167422 bytes_retransmit=9 bytes_invalid=0 send_seq=1899 receive_seq=1899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=0.02 cputime=24.390 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85488.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27576 bytes_read=167619 bytes_retransmit=9 bytes_invalid=0 send_seq=1901 receive_seq=1901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999452  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=0.02 cputime=24.415 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85489.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27582 bytes_read=167785 bytes_retransmit=9 bytes_invalid=0 send_seq=1902 receive_seq=1902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.02 cputime=24.440 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85490.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27588 bytes_read=167936 bytes_retransmit=9 bytes_invalid=0 send_seq=1903 receive_seq=1903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999460  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.02 cputime=24.464 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85491.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27594 bytes_read=168117 bytes_retransmit=9 bytes_invalid=0 send_seq=1904 receive_seq=1904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999458  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.02 cputime=24.489 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85492.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27600 bytes_read=168297 bytes_retransmit=9 bytes_invalid=0 send_seq=1905 receive_seq=1905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999457  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.02 cputime=24.515 memavail=3580724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85493.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27606 bytes_read=168448 bytes_retransmit=9 bytes_invalid=0 send_seq=1906 receive_seq=1906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999455  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.02 cputime=24.540 memavail=3581420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85494.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27612 bytes_read=168629 bytes_retransmit=9 bytes_invalid=0 send_seq=1907 receive_seq=1907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999455  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.02 cputime=24.565 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85495.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27618 bytes_read=168795 bytes_retransmit=9 bytes_invalid=0 send_seq=1908 receive_seq=1908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.02 cputime=24.592 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85496.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27624 bytes_read=168946 bytes_retransmit=9 bytes_invalid=0 send_seq=1909 receive_seq=1909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.02 cputime=24.619 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85497.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27630 bytes_read=169141 bytes_retransmit=9 bytes_invalid=0 send_seq=1910 receive_seq=1910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999470  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.02 cputime=24.647 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85498.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27688 bytes_read=169317 bytes_retransmit=9 bytes_invalid=0 send_seq=1913 receive_seq=1913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999479  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.02 cputime=24.677 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85499.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27694 bytes_read=169468 bytes_retransmit=9 bytes_invalid=0 send_seq=1914 receive_seq=1914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999483  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.02 cputime=24.706 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85500.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27700 bytes_read=169649 bytes_retransmit=9 bytes_invalid=0 send_seq=1915 receive_seq=1915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999489  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.02 cputime=24.733 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85501.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27706 bytes_read=169815 bytes_retransmit=9 bytes_invalid=0 send_seq=1916 receive_seq=1916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999486  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.02 cputime=24.760 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85502.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=27712 bytes_read=169981 bytes_retransmit=9 bytes_invalid=0 send_seq=1917 receive_seq=1917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999484  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.02 cputime=24.788 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85503.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=27718 bytes_read=170152 bytes_retransmit=9 bytes_invalid=0 send_seq=1918 receive_seq=1918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999480  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.02 cputime=24.814 memavail=3581500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85504.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=27724 bytes_read=170311 bytes_retransmit=9 bytes_invalid=0 send_seq=1919 receive_seq=1919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999480  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.02 cputime=24.841 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85505.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=27730 bytes_read=170462 bytes_retransmit=9 bytes_invalid=0 send_seq=1920 receive_seq=1920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999479  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.02 cputime=24.866 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85506.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=27736 bytes_read=170643 bytes_retransmit=9 bytes_invalid=0 send_seq=1921 receive_seq=1921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.02 cputime=24.893 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85507.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27742 bytes_read=170823 bytes_retransmit=9 bytes_invalid=0 send_seq=1922 receive_seq=1922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.02 cputime=24.919 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85508.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27748 bytes_read=170974 bytes_retransmit=9 bytes_invalid=0 send_seq=1923 receive_seq=1923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999470  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.02 cputime=24.943 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85509.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27754 bytes_read=171155 bytes_retransmit=9 bytes_invalid=0 send_seq=1924 receive_seq=1924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999476  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.02 cputime=24.971 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85510.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27760 bytes_read=171321 bytes_retransmit=9 bytes_invalid=0 send_seq=1925 receive_seq=1925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999475  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.02 cputime=24.998 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85511.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27766 bytes_read=171472 bytes_retransmit=9 bytes_invalid=0 send_seq=1926 receive_seq=1926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.02 cputime=25.022 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85512.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27772 bytes_read=171667 bytes_retransmit=9 bytes_invalid=0 send_seq=1927 receive_seq=1927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.10 cputime=25.049 memavail=3581424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85513.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27778 bytes_read=171833 bytes_retransmit=9 bytes_invalid=0 send_seq=1928 receive_seq=1928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999471  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.10 cputime=25.077 memavail=3581868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85514.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27784 bytes_read=171984 bytes_retransmit=9 bytes_invalid=0 send_seq=1929 receive_seq=1929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999469  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.10 cputime=25.103 memavail=3581948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85515.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27790 bytes_read=172165 bytes_retransmit=9 bytes_invalid=0 send_seq=1930 receive_seq=1930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.10 cputime=25.131 memavail=3581948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85516.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27796 bytes_read=172331 bytes_retransmit=9 bytes_invalid=0 send_seq=1931 receive_seq=1931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999475  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.10 cputime=25.158 memavail=3581948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85517.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27802 bytes_read=172482 bytes_retransmit=9 bytes_invalid=0 send_seq=1932 receive_seq=1932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999473  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.09 cputime=25.186 memavail=3581948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85518.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27808 bytes_read=172677 bytes_retransmit=9 bytes_invalid=0 send_seq=1933 receive_seq=1933 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.09 cputime=25.213 memavail=3581948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85519.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27814 bytes_read=172843 bytes_retransmit=9 bytes_invalid=0 send_seq=1934 receive_seq=1934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999470  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.09 cputime=25.240 memavail=3581824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85520.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27820 bytes_read=172994 bytes_retransmit=9 bytes_invalid=0 send_seq=1935 receive_seq=1935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999468  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.09 cputime=25.265 memavail=3581824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85521.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27826 bytes_read=173175 bytes_retransmit=9 bytes_invalid=0 send_seq=1936 receive_seq=1936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999466  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.09 cputime=25.292 memavail=3581824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85522.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27832 bytes_read=173341 bytes_retransmit=9 bytes_invalid=0 send_seq=1937 receive_seq=1937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.08 cputime=25.319 memavail=3581824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85523.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27838 bytes_read=173506 bytes_retransmit=9 bytes_invalid=0 send_seq=1938 receive_seq=1938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.08 cputime=25.345 memavail=3582068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85524.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27844 bytes_read=173687 bytes_retransmit=9 bytes_invalid=0 send_seq=1939 receive_seq=1939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999468  heater_bed: target=0 temp=52.0 pwm=0.000 sysload=0.08 cputime=25.369 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85525.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27850 bytes_read=173853 bytes_retransmit=9 bytes_invalid=0 send_seq=1940 receive_seq=1940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=52.0 pwm=0.000 sysload=0.08 cputime=25.395 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85526.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27856 bytes_read=174004 bytes_retransmit=9 bytes_invalid=0 send_seq=1941 receive_seq=1941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999477  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.08 cputime=25.421 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85527.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27862 bytes_read=174173 bytes_retransmit=9 bytes_invalid=0 send_seq=1942 receive_seq=1942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999474  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.15 cputime=25.449 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85528.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27868 bytes_read=174348 bytes_retransmit=9 bytes_invalid=0 send_seq=1943 receive_seq=1943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999472  heater_bed: target=0 temp=52.0 pwm=0.000 sysload=0.15 cputime=25.475 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85529.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27874 bytes_read=174499 bytes_retransmit=9 bytes_invalid=0 send_seq=1944 receive_seq=1944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999469  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.15 cputime=25.498 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85530.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27880 bytes_read=174680 bytes_retransmit=9 bytes_invalid=0 send_seq=1945 receive_seq=1945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999465  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.15 cputime=25.524 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85531.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27886 bytes_read=174846 bytes_retransmit=9 bytes_invalid=0 send_seq=1946 receive_seq=1946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999461  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.15 cputime=25.551 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85532.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27892 bytes_read=175012 bytes_retransmit=9 bytes_invalid=0 send_seq=1947 receive_seq=1947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.14 cputime=25.576 memavail=3582212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85533.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27898 bytes_read=175192 bytes_retransmit=9 bytes_invalid=0 send_seq=1948 receive_seq=1948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999459  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.14 cputime=25.601 memavail=3581772 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85534.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27904 bytes_read=175358 bytes_retransmit=9 bytes_invalid=0 send_seq=1949 receive_seq=1949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999457  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.14 cputime=25.626 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85535.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27910 bytes_read=175524 bytes_retransmit=9 bytes_invalid=0 send_seq=1950 receive_seq=1950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999457  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.14 cputime=25.653 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85536.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27916 bytes_read=175690 bytes_retransmit=9 bytes_invalid=0 send_seq=1951 receive_seq=1951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.14 cputime=25.678 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85537.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27922 bytes_read=175856 bytes_retransmit=9 bytes_invalid=0 send_seq=1952 receive_seq=1952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.13 cputime=25.703 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85538.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27928 bytes_read=176036 bytes_retransmit=9 bytes_invalid=0 send_seq=1953 receive_seq=1953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.13 cputime=25.727 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85539.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27934 bytes_read=176202 bytes_retransmit=9 bytes_invalid=0 send_seq=1954 receive_seq=1954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999453  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.13 cputime=25.751 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85540.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27940 bytes_read=176368 bytes_retransmit=9 bytes_invalid=0 send_seq=1955 receive_seq=1955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999450  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.13 cputime=25.776 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85541.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27946 bytes_read=176534 bytes_retransmit=9 bytes_invalid=0 send_seq=1956 receive_seq=1956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999450  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.13 cputime=25.801 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85542.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27952 bytes_read=176700 bytes_retransmit=9 bytes_invalid=0 send_seq=1957 receive_seq=1957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999448  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.12 cputime=25.826 memavail=3582000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85543.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27958 bytes_read=176880 bytes_retransmit=9 bytes_invalid=0 send_seq=1958 receive_seq=1958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999446  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.12 cputime=25.852 memavail=3581940 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85544.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27964 bytes_read=177046 bytes_retransmit=9 bytes_invalid=0 send_seq=1959 receive_seq=1959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999447  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.12 cputime=25.877 memavail=3581928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85545.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27970 bytes_read=177212 bytes_retransmit=9 bytes_invalid=0 send_seq=1960 receive_seq=1960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999447  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.12 cputime=25.903 memavail=3581928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85546.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27976 bytes_read=177378 bytes_retransmit=9 bytes_invalid=0 send_seq=1961 receive_seq=1961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999445  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.12 cputime=25.927 memavail=3581928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85547.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27982 bytes_read=177544 bytes_retransmit=9 bytes_invalid=0 send_seq=1962 receive_seq=1962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.11 cputime=25.951 memavail=3581928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85548.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=27988 bytes_read=177724 bytes_retransmit=9 bytes_invalid=0 send_seq=1963 receive_seq=1963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999464  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.11 cputime=25.975 memavail=3581928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85549.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28000 bytes_read=177906 bytes_retransmit=9 bytes_invalid=0 send_seq=1965 receive_seq=1965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999457  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.11 cputime=25.999 memavail=3581932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85550.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28006 bytes_read=178070 bytes_retransmit=9 bytes_invalid=0 send_seq=1966 receive_seq=1966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999454  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.11 cputime=26.023 memavail=3581932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85551.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28012 bytes_read=178225 bytes_retransmit=9 bytes_invalid=0 send_seq=1967 receive_seq=1967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999453  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.11 cputime=26.047 memavail=3581932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85552.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28018 bytes_read=178388 bytes_retransmit=9 bytes_invalid=0 send_seq=1968 receive_seq=1968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999451  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.10 cputime=26.071 memavail=3581932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85553.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28024 bytes_read=178568 bytes_retransmit=9 bytes_invalid=0 send_seq=1969 receive_seq=1969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999449  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.10 cputime=26.095 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85554.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28030 bytes_read=178734 bytes_retransmit=9 bytes_invalid=0 send_seq=1970 receive_seq=1970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999447  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.10 cputime=26.121 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85555.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28036 bytes_read=178900 bytes_retransmit=9 bytes_invalid=0 send_seq=1971 receive_seq=1971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999445  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.10 cputime=26.148 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85556.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28042 bytes_read=179066 bytes_retransmit=9 bytes_invalid=0 send_seq=1972 receive_seq=1972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999444  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.10 cputime=26.175 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85557.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28102 bytes_read=179242 bytes_retransmit=9 bytes_invalid=0 send_seq=1975 receive_seq=1975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999443  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.09 cputime=26.203 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85558.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28108 bytes_read=179423 bytes_retransmit=9 bytes_invalid=0 send_seq=1976 receive_seq=1976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999442  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.09 cputime=26.230 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85559.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28114 bytes_read=179589 bytes_retransmit=9 bytes_invalid=0 send_seq=1977 receive_seq=1977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999442  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.09 cputime=26.256 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85560.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28120 bytes_read=179755 bytes_retransmit=9 bytes_invalid=0 send_seq=1978 receive_seq=1978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999441  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.09 cputime=26.282 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85561.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28126 bytes_read=179921 bytes_retransmit=9 bytes_invalid=0 send_seq=1979 receive_seq=1979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999439  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.09 cputime=26.307 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85562.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28132 bytes_read=180087 bytes_retransmit=9 bytes_invalid=0 send_seq=1980 receive_seq=1980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.08 cputime=26.333 memavail=3582064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85563.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28138 bytes_read=180267 bytes_retransmit=9 bytes_invalid=0 send_seq=1981 receive_seq=1981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.08 cputime=26.360 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85564.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28144 bytes_read=180433 bytes_retransmit=9 bytes_invalid=0 send_seq=1982 receive_seq=1982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.08 cputime=26.385 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85565.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28150 bytes_read=180599 bytes_retransmit=9 bytes_invalid=0 send_seq=1983 receive_seq=1983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.08 cputime=26.410 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85566.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28156 bytes_read=180765 bytes_retransmit=9 bytes_invalid=0 send_seq=1984 receive_seq=1984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999435  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.08 cputime=26.435 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85567.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28162 bytes_read=180931 bytes_retransmit=9 bytes_invalid=0 send_seq=1985 receive_seq=1985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.08 cputime=26.459 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85568.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28168 bytes_read=181111 bytes_retransmit=9 bytes_invalid=0 send_seq=1986 receive_seq=1986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999431  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.08 cputime=26.485 memavail=3582332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85569.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28174 bytes_read=181277 bytes_retransmit=9 bytes_invalid=0 send_seq=1987 receive_seq=1987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999430  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.08 cputime=26.509 memavail=3582208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85570.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28180 bytes_read=181443 bytes_retransmit=9 bytes_invalid=0 send_seq=1988 receive_seq=1988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.08 cputime=26.535 memavail=3582208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85571.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28186 bytes_read=181609 bytes_retransmit=9 bytes_invalid=0 send_seq=1989 receive_seq=1989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.08 cputime=26.561 memavail=3582208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85572.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28192 bytes_read=181775 bytes_retransmit=9 bytes_invalid=0 send_seq=1990 receive_seq=1990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.07 cputime=26.586 memavail=3582208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85573.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28198 bytes_read=181955 bytes_retransmit=9 bytes_invalid=0 send_seq=1991 receive_seq=1991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999432  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.07 cputime=26.611 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85574.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28204 bytes_read=182117 bytes_retransmit=9 bytes_invalid=0 send_seq=1992 receive_seq=1992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999431  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.07 cputime=26.634 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85575.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28210 bytes_read=182272 bytes_retransmit=9 bytes_invalid=0 send_seq=1993 receive_seq=1993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.07 cputime=26.658 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85576.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28216 bytes_read=182437 bytes_retransmit=9 bytes_invalid=0 send_seq=1994 receive_seq=1994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.07 cputime=26.682 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85577.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28222 bytes_read=182603 bytes_retransmit=9 bytes_invalid=0 send_seq=1995 receive_seq=1995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.07 cputime=26.707 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85578.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28228 bytes_read=182783 bytes_retransmit=9 bytes_invalid=0 send_seq=1996 receive_seq=1996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999435  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.07 cputime=26.731 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85579.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28234 bytes_read=182949 bytes_retransmit=9 bytes_invalid=0 send_seq=1997 receive_seq=1997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.07 cputime=26.755 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85580.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28240 bytes_read=183115 bytes_retransmit=9 bytes_invalid=0 send_seq=1998 receive_seq=1998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.07 cputime=26.780 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85581.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28246 bytes_read=183281 bytes_retransmit=9 bytes_invalid=0 send_seq=1999 receive_seq=1999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.07 cputime=26.806 memavail=3582256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85582.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28252 bytes_read=183447 bytes_retransmit=9 bytes_invalid=0 send_seq=2000 receive_seq=2000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.06 cputime=26.832 memavail=3582272 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85583.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28258 bytes_read=183627 bytes_retransmit=9 bytes_invalid=0 send_seq=2001 receive_seq=2001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999432  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.06 cputime=26.856 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85584.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28264 bytes_read=183793 bytes_retransmit=9 bytes_invalid=0 send_seq=2002 receive_seq=2002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999442  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.06 cputime=26.881 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85585.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28270 bytes_read=183959 bytes_retransmit=9 bytes_invalid=0 send_seq=2003 receive_seq=2003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999442  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.06 cputime=26.907 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85586.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28276 bytes_read=184125 bytes_retransmit=9 bytes_invalid=0 send_seq=2004 receive_seq=2004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999441  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.06 cputime=26.933 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85587.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28282 bytes_read=184306 bytes_retransmit=9 bytes_invalid=0 send_seq=2005 receive_seq=2005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999440  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.06 cputime=26.959 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85588.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28288 bytes_read=184471 bytes_retransmit=9 bytes_invalid=0 send_seq=2006 receive_seq=2006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999439  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.06 cputime=26.986 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85589.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28294 bytes_read=184637 bytes_retransmit=9 bytes_invalid=0 send_seq=2007 receive_seq=2007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999437  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.06 cputime=27.010 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85590.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28300 bytes_read=184818 bytes_retransmit=9 bytes_invalid=0 send_seq=2008 receive_seq=2008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.06 cputime=27.038 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85591.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28306 bytes_read=184969 bytes_retransmit=9 bytes_invalid=0 send_seq=2009 receive_seq=2009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.06 cputime=27.065 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85592.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28312 bytes_read=185135 bytes_retransmit=9 bytes_invalid=0 send_seq=2010 receive_seq=2010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999435  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.05 cputime=27.091 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85593.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28318 bytes_read=185330 bytes_retransmit=9 bytes_invalid=0 send_seq=2011 receive_seq=2011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.05 cputime=27.118 memavail=3581540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85594.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28324 bytes_read=185481 bytes_retransmit=9 bytes_invalid=0 send_seq=2012 receive_seq=2012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999437  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.05 cputime=27.143 memavail=3581540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85595.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28330 bytes_read=185647 bytes_retransmit=9 bytes_invalid=0 send_seq=2013 receive_seq=2013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.05 cputime=27.171 memavail=3581540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85596.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28336 bytes_read=185828 bytes_retransmit=9 bytes_invalid=0 send_seq=2014 receive_seq=2014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999435  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.05 cputime=27.196 memavail=3581540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85597.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28342 bytes_read=185979 bytes_retransmit=9 bytes_invalid=0 send_seq=2015 receive_seq=2015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999434  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.05 cputime=27.221 memavail=3581540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85598.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28348 bytes_read=186154 bytes_retransmit=9 bytes_invalid=0 send_seq=2016 receive_seq=2016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999432  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.05 cputime=27.247 memavail=3581540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85599.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28354 bytes_read=186324 bytes_retransmit=9 bytes_invalid=0 send_seq=2017 receive_seq=2017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999430  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.05 cputime=27.275 memavail=3581544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85600.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28360 bytes_read=186474 bytes_retransmit=9 bytes_invalid=0 send_seq=2018 receive_seq=2018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999437  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.05 cputime=27.300 memavail=3581544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85601.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28366 bytes_read=186640 bytes_retransmit=9 bytes_invalid=0 send_seq=2019 receive_seq=2019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.05 cputime=27.327 memavail=3581544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85602.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28372 bytes_read=186821 bytes_retransmit=9 bytes_invalid=0 send_seq=2020 receive_seq=2020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999432  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.04 cputime=27.353 memavail=3581544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85603.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28378 bytes_read=186986 bytes_retransmit=9 bytes_invalid=0 send_seq=2021 receive_seq=2021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.04 cputime=27.380 memavail=3582052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85604.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28384 bytes_read=187152 bytes_retransmit=9 bytes_invalid=0 send_seq=2022 receive_seq=2022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999430  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.04 cputime=27.405 memavail=3582052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85605.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28390 bytes_read=187333 bytes_retransmit=9 bytes_invalid=0 send_seq=2023 receive_seq=2023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.04 cputime=27.433 memavail=3582052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85606.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28396 bytes_read=187484 bytes_retransmit=9 bytes_invalid=0 send_seq=2024 receive_seq=2024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.04 cputime=27.458 memavail=3582052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85607.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28402 bytes_read=187650 bytes_retransmit=9 bytes_invalid=0 send_seq=2025 receive_seq=2025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.04 cputime=27.485 memavail=3582052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85608.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28408 bytes_read=187845 bytes_retransmit=9 bytes_invalid=0 send_seq=2026 receive_seq=2026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999427  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.04 cputime=27.512 memavail=3582052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85609.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28414 bytes_read=187996 bytes_retransmit=9 bytes_invalid=0 send_seq=2027 receive_seq=2027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999430  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.04 cputime=27.539 memavail=3582052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85610.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28426 bytes_read=188178 bytes_retransmit=9 bytes_invalid=0 send_seq=2029 receive_seq=2029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.04 cputime=27.568 memavail=3582056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85611.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28432 bytes_read=188359 bytes_retransmit=9 bytes_invalid=0 send_seq=2030 receive_seq=2030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.04 cputime=27.596 memavail=3582056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85612.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28438 bytes_read=188510 bytes_retransmit=9 bytes_invalid=0 send_seq=2031 receive_seq=2031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.04 cputime=27.623 memavail=3582056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85613.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28444 bytes_read=188705 bytes_retransmit=9 bytes_invalid=0 send_seq=2032 receive_seq=2032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999425  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.04 cputime=27.649 memavail=3581840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85614.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28450 bytes_read=188871 bytes_retransmit=9 bytes_invalid=0 send_seq=2033 receive_seq=2033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999425  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.04 cputime=27.675 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85615.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28456 bytes_read=189022 bytes_retransmit=9 bytes_invalid=0 send_seq=2034 receive_seq=2034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999424  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.04 cputime=27.701 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85616.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28462 bytes_read=189203 bytes_retransmit=9 bytes_invalid=0 send_seq=2035 receive_seq=2035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999425  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.04 cputime=27.728 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85617.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28522 bytes_read=189379 bytes_retransmit=9 bytes_invalid=0 send_seq=2038 receive_seq=2038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.03 cputime=27.757 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85618.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28528 bytes_read=189545 bytes_retransmit=9 bytes_invalid=0 send_seq=2039 receive_seq=2039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.03 cputime=27.783 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85619.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28534 bytes_read=189726 bytes_retransmit=9 bytes_invalid=0 send_seq=2040 receive_seq=2040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.03 cputime=27.810 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85620.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28540 bytes_read=189892 bytes_retransmit=9 bytes_invalid=0 send_seq=2041 receive_seq=2041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999438  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.03 cputime=27.838 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85621.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28546 bytes_read=190043 bytes_retransmit=9 bytes_invalid=0 send_seq=2042 receive_seq=2042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999437  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.03 cputime=27.864 memavail=3581944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85622.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=28552 bytes_read=190215 bytes_retransmit=9 bytes_invalid=0 send_seq=2043 receive_seq=2043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.03 cputime=27.891 memavail=3581948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85623.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28558 bytes_read=190387 bytes_retransmit=9 bytes_invalid=0 send_seq=2044 receive_seq=2044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999436  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.03 cputime=27.918 memavail=3582140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85624.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28564 bytes_read=190538 bytes_retransmit=9 bytes_invalid=0 send_seq=2045 receive_seq=2045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.03 cputime=27.942 memavail=3582140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85625.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28570 bytes_read=190719 bytes_retransmit=9 bytes_invalid=0 send_seq=2046 receive_seq=2046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999430  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.03 cputime=27.969 memavail=3582140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85626.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28576 bytes_read=190885 bytes_retransmit=9 bytes_invalid=0 send_seq=2047 receive_seq=2047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.03 cputime=27.994 memavail=3582140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85627.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28582 bytes_read=191036 bytes_retransmit=9 bytes_invalid=0 send_seq=2048 receive_seq=2048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999427  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.03 cputime=28.020 memavail=3582140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85628.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28588 bytes_read=191231 bytes_retransmit=9 bytes_invalid=0 send_seq=2049 receive_seq=2049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999426  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.03 cputime=28.046 memavail=3582024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85629.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28594 bytes_read=191397 bytes_retransmit=9 bytes_invalid=0 send_seq=2050 receive_seq=2050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999427  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.03 cputime=28.073 memavail=3582024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85630.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28600 bytes_read=191548 bytes_retransmit=9 bytes_invalid=0 send_seq=2051 receive_seq=2051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999426  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.03 cputime=28.100 memavail=3582024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 85631.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28606 bytes_read=191729 bytes_retransmit=9 bytes_invalid=0 send_seq=2052 receive_seq=2052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999426  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.03 cputime=28.128 memavail=3582024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85632.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28612 bytes_read=191895 bytes_retransmit=9 bytes_invalid=0 send_seq=2053 receive_seq=2053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999426  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.02 cputime=28.156 memavail=3582024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85633.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28618 bytes_read=192060 bytes_retransmit=9 bytes_invalid=0 send_seq=2054 receive_seq=2054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999426  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.02 cputime=28.183 memavail=3581652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85634.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28624 bytes_read=192241 bytes_retransmit=9 bytes_invalid=0 send_seq=2055 receive_seq=2055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.02 cputime=28.212 memavail=3581756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85635.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28630 bytes_read=192407 bytes_retransmit=9 bytes_invalid=0 send_seq=2056 receive_seq=2056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999428  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.02 cputime=28.238 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 85636.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28636 bytes_read=192558 bytes_retransmit=9 bytes_invalid=0 send_seq=2057 receive_seq=2057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.02 cputime=28.263 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85637.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28642 bytes_read=192739 bytes_retransmit=9 bytes_invalid=0 send_seq=2058 receive_seq=2058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.02 cputime=28.291 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85638.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28648 bytes_read=192919 bytes_retransmit=9 bytes_invalid=0 send_seq=2059 receive_seq=2059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.02 cputime=28.317 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85639.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28654 bytes_read=193070 bytes_retransmit=9 bytes_invalid=0 send_seq=2060 receive_seq=2060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.02 cputime=28.343 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85640.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28660 bytes_read=193251 bytes_retransmit=9 bytes_invalid=0 send_seq=2061 receive_seq=2061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999429  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.02 cputime=28.369 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85641.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28666 bytes_read=193417 bytes_retransmit=9 bytes_invalid=0 send_seq=2062 receive_seq=2062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999430  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.02 cputime=28.395 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85642.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28672 bytes_read=193568 bytes_retransmit=9 bytes_invalid=0 send_seq=2063 receive_seq=2063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999430  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.02 cputime=28.422 memavail=3581780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85643.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28678 bytes_read=193763 bytes_retransmit=9 bytes_invalid=0 send_seq=2064 receive_seq=2064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999432  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.02 cputime=28.449 memavail=3581684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85644.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28684 bytes_read=193929 bytes_retransmit=9 bytes_invalid=0 send_seq=2065 receive_seq=2065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999432  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.02 cputime=28.475 memavail=3581788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85645.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28690 bytes_read=194080 bytes_retransmit=9 bytes_invalid=0 send_seq=2066 receive_seq=2066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.02 cputime=28.500 memavail=3581800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85646.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28696 bytes_read=194253 bytes_retransmit=9 bytes_invalid=0 send_seq=2067 receive_seq=2067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999433  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.02 cputime=28.527 memavail=3581800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85647.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28702 bytes_read=194411 bytes_retransmit=9 bytes_invalid=0 send_seq=2068 receive_seq=2068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999448  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.02 cputime=28.552 memavail=3581800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 85648.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=28708 bytes_read=194576 bytes_retransmit=9 bytes_invalid=0 send_seq=2069 receive_seq=2069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999456  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.02 cputime=28.578 memavail=3581800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 93439.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=129691 bytes_read=1516413 bytes_retransmit=9 bytes_invalid=0 send_seq=11962 receive_seq=11962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=179999397  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.07 cputime=225.259 memavail=3583632 print_time=8891.718 buffer_time=0.707 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 3021507880: Disconnected
Restarting printer
Start printer at Sun Sep 18 10:12:15 2022 (1663517535.5 93441.7)
===== Config file =====
[virtual_sdcard]
path = /home/pi/gcode_files

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	G91
	G1 z5 F600  ;lift nozzle from the print
	G90
	TURN_OFF_HEATERS
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_extrude = 1.0
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
	{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% if act_z < (max_z - 2.0) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	PAUSE_BASE
	G91
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G1 E-{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	{% if "xyz" in printer.toolhead.homed_axes %}
	G1 Z{z_safe} F900
	G90
	G1 X{x_park} Y{y_park} F6000
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	{% set E = printer["gcode_macro PAUSE"].extrude|float %}
	{% if 'VELOCITY' in params|upper %}
	{% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
	{%else %}
	{% set get_params = "" %}
	{% endif %}
	{% if printer.extruder.can_extrude|lower == 'true' %}
	G91
	G1 E{E} F2100
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}
	RESUME_BASE {get_params}

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 200
variable_move_accel = 1000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 358
variable_max_bed_x = 350
variable_z_endstop_x = 232
variable_z_endstop_y = 358
variable_docklocation_x = 0
variable_docklocation_y = 358
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 250
variable_dockmove_x = 20
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 15
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff_x = 10
variable_home_backoff_y = 10
variable_override_homing = 'X'
variable_dock_on_zhome = True
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[respond]

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if ((printer.toolhead.position.z < safe_z) or (docklocation_z != -128 and docklocation_z < safe_z ))%}
	_KlickyDebug msg="Dock_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate} from {printer.toolhead.position.z}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set kinematic_z = 0 %}
	{% set dock_on_zhome = printer["gcode_macro _User_Variables"].dock_on_zhome|default(True) %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff_x = printer["gcode_macro _User_Variables"].home_backoff_x|default(0) %}
	{% set home_backoff_y = printer["gcode_macro _User_Variables"].home_backoff_y|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set kinematic_z = safe_z %}
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, with homed axes, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=0 Z={kinematic_z}"
	SET_KINEMATIC_POSITION X=0 Y=0 Z={kinematic_z}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_X external script to handle the X homing"
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X, G28 X0"
	G28 X0
	{% if home_backoff_x != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff_x|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff_x|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug msg="homing_override calling _HOME_Y external script to handle the Y homing"
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y, G28 Y0"
	G28 Y0
	{% if home_backoff_y != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff_y|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff_y|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% elif dock_on_zhome == True %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% elif dock_on_zhome == False %}
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z XY Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}   ;Home if not homed
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing = _QUAD_GANTRY_LEVEL
description = Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("QG Level") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_QUAD_GANTRY_LEVEL {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[z_calibration]
nozzle_xy_position = 232,358
switch_xy_position = 229,335
bed_xy_position = 175,177
switch_offset = 0.545
max_deviation = 2
clearance = 5
speed = 300
probing_first_fast = false
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_Probe

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 5,5
algorithm = bicubic
bicubic_tension = 0.2
mesh_pps = 2,3
relative_reference_index = 12

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BACK]
gcode = 
	M876 S1

[gcode_macro NEXT]
gcode = 
	m876 S2

[gcode_macro CANCEL]
gcode = 
	m876 S1

[gcode_macro EXTRACT]
gcode = 
	m876 S3

[pause_resume]
recover_velocity = 100

[gcode_macro m600cfg]
variable_default_temp = 220
variable_cooldown = 1
variable_x = 175
variable_y = 30
variable_z = 10
variable_zmin = 70
variable_load_fast = 6
variable_load_slow = 1
variable_bowden = 25
variable_speed_1 = 6000
variable_speed_2 = 9000
variable_purge = 20
variable_output = 118
variable_step_a1 = "<CENTER><P><B>STEP 1/3 </B></P><H2>TIME TO CHANGE</H2>"
variable_step_b1 = "Beware, the nozzle could be hot! <dl><dt>"
variable_step_c1 = "Temperature set to 0 for security reasons<dl><dt>"
variable_step_d1 = "Click <b>NEXT</B> to heat up (again)<BR> Klipper will then unload the filament<BR><BR>"
variable_step_2 = "<CENTER><P><B>STEP 2/3</B></P><B>Load the new filament and click NEXT<BR><BR>( +/- 10mm into PTFE tube)"
variable_step_3 = "<CENTER><P><B>STEP 3/3</B></P><B>Wipe nozzle clean, then click NEXT to resume print or click BACK to unload again and return to step 2"
variable_next = "NEXT"
variable_previous = "BACK"
variable_cancel = "CANCEL"
variable_purgetext = "EXTRACT"
gcode = 
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=default_temp VALUE={default_temp}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cooldown VALUE={cooldown}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=x VALUE={x}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=y VALUE={y}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=z VALUE={z}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=zmin VALUE={zmin}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_fast VALUE={retract_fast}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=retract_slow VALUE={retract_slow}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_1 VALUE={speed_1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=speed_2 VALUE={speed_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purge VALUE={purge}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=output VALUE={output}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_a1 VALUE={step_a1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_b1 VALUE={step_b1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_v1 VALUE={step_c1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_d1 VALUE={step_d1}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_2 VALUE={step_2}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=step_3 VALUE={step_3}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=next VALUE={next}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=previous VALUE={previous}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=cancel VALUE={cancel}
	SET_GCODE_VARIABLE MACRO=m600cfg VARIABLE=purgetext VALUE={purgetext}

[gcode_macro M876]
variable_myjob = 0
gcode = 
	{% set S = params.S|default(-1)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if  myjob != 0 %}
	{% if S == 1 %}
	{% set myjob = myjob-2 %}
	{% elif S == 2%}
	{% elif S == 3%}
	{% if myjob == 6003 %}
	{% set myjob = 6004 %}
	{% else %}
	{% set myjob = 6003 %}
	{% endif %}
	{% endif %}
	{% if myjob == 5999 %}
	JOBCENTER NEWJOB=5999
	{% elif myjob == 6001%}
	JOBCENTER NEWJOB=6001
	{% elif myjob == 6002%}
	JOBCENTER NEWJOB=6002
	{% elif myjob == 6003%}
	JOBCENTER NEWJOB=6003
	{% elif myjob == 6004%}
	JOBCENTER NEWJOB=6004
	{% endif %}
	{% endif %}

[gcode_macro JOBCENTER]
variable_temperature = 0
variable_job = 0
variable_myjob = 0
variable_cool = 1
variable_mystep = 1
gcode = 
	RESPOND TYPE=echo MSG="Jobcenter recieved: {params.NEWJOB} "
	{% set NEWJOB = params.NEWJOB|default(0)|int %}
	{% set myjob = printer["gcode_macro JOBCENTER"].job %}
	{% if NEWJOB == 6004 %}
	M{printer["gcode_macro m600cfg"].output|int} Extracting ...
	M83
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].purge|int} F200
	G92 E0.0
	{% set NEWJOB=6005 %}
	{% endif %}
	{% if NEWJOB == 6003 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature==0 %}
	M109 S0
	{% else %}
	M109 S{printer["gcode_macro JOBCENTER"].temperature}
	{% endif%}
	RESUME
	RESPOND TYPE=command MSG="action:notification Resuming print..."
	{% set myjob=0 %}
	{% endif %}
	{% if ( NEWJOB == 6002 or NEWJOB == 6005) %}
	{% if NEWJOB==6002 %}
	M{printer["gcode_macro m600cfg"].output|int} Loading filament
	M701
	{% endif %}
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_3}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].previous}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].purgetext} {printer["gcode_macro m600cfg"].purge|int} mm"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6003 %}
	{% endif %}
	{% if NEWJOB == 6001 %}
	RESPOND TYPE=echo MSG="6001 entered"
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature}
	RESPOND TYPE=echo MSG="emptying filament"
	M{printer["gcode_macro m600cfg"].output|int} Unloading filament
	M702
	RESPOND TYPE=command MSG="action:prompt_begin {printer["gcode_macro m600cfg"].step_2}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_show"
	RESPOND TYPE=echo MSG="setting 6002"
	{% set myjob=6002 %}
	{% endif %}
	{% if NEWJOB == 5999 %}
	M{printer["gcode_macro m600cfg"].output|int} Restoring printer state
	{% if printer["gcode_macro JOBCENTER"].temperature != 0 %}
	LOW_TEMP_CHECK T={printer["gcode_macro JOBCENTER"].temperature} OVERRIDE=1
	{% endif %}
	RESUME
	RESPOND TYPE=command MSG="action:notification M600 cancelled"
	{% set myjob=0 %}
	{% endif %}
	{% if NEWJOB == 600 %}
	PAUSE
	M125
	{% set cool=printer["gcode_macro m600cfg"].cooldown|int %}
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_b1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% if cool != 0 %}
	M104 S0
	{% set mystep=[printer["gcode_macro m600cfg"].step_a1,printer["gcode_macro m600cfg"].step_c1,printer["gcode_macro m600cfg"].step_d1]|join() %}
	{% endif %}
	SET_IDLE_TIMEOUT TIMEOUT=7200
	RESPOND TYPE=command MSG="action:prompt_begin {mystep}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].next}"
	RESPOND TYPE=command MSG="action:prompt_choice {printer["gcode_macro m600cfg"].cancel}"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% set myjob=6001 %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=job VALUE={myjob}

[gcode_macro M125]
gcode = 
	M{printer["gcode_macro m600cfg"].output|int} Moving hotend to {printer["gcode_macro m600cfg"].x|int}, {printer["gcode_macro m600cfg"].y|int}, {printer["gcode_macro m600cfg"].z|int} ({printer["gcode_macro m600cfg"].zmin|int})
	SET_GCODE_VARIABLE MACRO=JOBCENTER VARIABLE=temperature VALUE={printer.extruder.target}
	{% if printer.toolhead.homed_axes != "xyz" %}
	M{printer["gcode_macro m600cfg"].output|int} Probably not printing. Homing needed ...
	G28
	{% endif %}
	G91
	{% if printer.extruder.target != 0 %}
	LOW_TEMP_CHECK
	G1 E-2 F1500
	{% endif %}
	{% if printer.toolhead.position.z|float + printer["gcode_macro m600cfg"].z|float < printer.configfile.config["stepper_z"]["position_max"]|float %}
	{% if  printer.toolhead.position.z < printer["gcode_macro m600cfg"].zmin|int %}
	G1 Z{printer["gcode_macro m600cfg"].zmin|int|int-printer.toolhead.position.z|int}
	{% else %}
	SAVE_GCODE_STATE NAME=save_state
	G1 Z{printer["gcode_macro m600cfg"].z|int}
	RESTORE_GCODE_STATE NAME=save_state
	{% endif %}
	{% endif%}
	G90
	G1 X{printer["gcode_macro m600cfg"].x|int} Y{printer["gcode_macro m600cfg"].y|int} F{printer["gcode_macro m600cfg"].speed_2|int}

[gcode_macro M701]
gcode = 
	M83
	G92 E0.0
	LOW_TEMP_CHECK
	G1 E{printer["gcode_macro m600cfg"].load_fast|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G92 E0.0
	G1 E{printer["gcode_macro m600cfg"].load_slow|int} F200
	G92 E0.0

[gcode_macro M702]
gcode = 
	LOW_TEMP_CHECK
	G91
	G1 E10 F1200
	G1 E-{printer["gcode_macro m600cfg"].bowden|int} F{printer["gcode_macro m600cfg"].speed_1|int}
	G90

[gcode_macro M600]
gcode = 
	JOBCENTER NEWJOB=600

[gcode_macro LOW_TEMP_CHECK]
gcode = 
	{% if not params.OVERRIDE is defined %}
	{% if params.T is defined %}
	{% set TMP=params.T|int%}
	{% if printer.configfile.config.extruder.max_temp is defined %}
	{% if params.T|int>printer.configfile.config.extruder.max_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% endif %}
	{% if TMP|int==0 %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% endif %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp|int %}
	{% if printer["gcode_macro JOBCENTER"].temperature|int > 0 %}
	{% set TMP=printer["gcode_macro JOBCENTER"].temperature %}
	{% endif %}
	{% endif %}
	{% if printer.configfile.config.extruder.min_extrude_temp is defined %}
	{% if TMP|int<printer.configfile.config.extruder.min_extrude_temp|int %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif%}
	{% endif %}
	{% else %}
	{% if params.T is defined %}
	{% set TMP=params.T|int %}
	{% else %}
	{% set TMP=printer["gcode_macro m600cfg"].default_temp %}
	{% endif %}
	{% endif %}
	{% if printer.extruder.temperature|int > TMP|int %}
	M{printer["gcode_macro m600cfg"].output|int} Temperature set to {TMP}.
	M104 S{TMP}
	{% else %}
	M{printer["gcode_macro m600cfg"].output|int} Heating to {TMP}
	M109 S{TMP}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display]
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_fan chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VX.xxx " }
	~voron~
	{% endif %}

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_1C001F001450324E31333220-if00
restart_method = command

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 3000
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG6
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PG9
position_min = 0
position_endstop = 358
position_max = 358
homing_speed = 80
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = PG10
position_max = 330
position_min = -7
homing_speed = 8
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = 6.420

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE2
dir_pin = PE3
enable_pin = !PD4
rotation_distance = 22.6789511
gear_ratio = 50:17
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.600
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF4
min_temp = 10
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
control = pid
pid_kp = 29.338
pid_ki = 1.956
pid_kd = 110.016

[tmc2209 extruder]
uart_pin = PE1
interpolate = false
run_current = 0.5
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.7
min_temp = 0
max_temp = 120
control = pid
pid_kp = 46.930
pid_ki = 0.398
pid_kd = 1385.024

[probe]
pin = PG15
x_offset = 0
y_offset = 25.0
z_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed

[temperature_fan chamber]
pin = PD13
max_power = 1.0
shutdown_speed = 0.0
kick_start_time = 5.0
cycle_time = 0.01
off_below = 0.1
sensor_type = ATC Semitec 104GT-2
sensor_pin = PF5
min_temp = 0
max_temp = 80
target_temp = 35.0
control = watermark
gcode_id = C

[idle_timeout]
timeout = 1800

[quad_gantry_level]
gantry_corners = 
	-60,-10
	410,420
points = 
	40,10
	40,320
	320,320
	320,10
speed = 150
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075
max_adjust = 10

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[output_pin beeper]
pin = EXP1_1

[neopixel mks_mini12864]
pin = EXP1_6
chain_count = 3
color_order = RGB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[gcode_macro G32]
gcode = 
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	QUAD_GANTRY_LEVEL
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_START]
gcode = 
	G32                            ; home all axes
	CALIBRATE_Z                    ; autocalibrate Z
	G1 Z20 F5000                   ; move nozzle away from bed

[gcode_macro PRINT_END]
gcode = 
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	G92 E0                         ; zero the extruder
	G1 E-5.0 F1800                 ; retract filament
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[gcode_macro M141]
description = Set the chamber target temperature.
gcode = 
	SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber TARGET={params.S}

[bed_mesh default]
version = 1
points = 
	-0.047500, -0.007500, 0.000000, -0.008750, -0.046250
	-0.048750, -0.033750, -0.003750, -0.033750, -0.048750
	-0.052500, -0.037500, 0.000000, -0.046250, -0.073750
	-0.062500, -0.031250, -0.015000, -0.033750, -0.055000
	-0.063750, -0.061250, -0.048750, -0.053750, -0.057500
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 5
mesh_y_pps = 3
min_y = 40.0
x_count = 5
max_y = 310.0
mesh_x_pps = 2
max_x = 310.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
webhooks client 3042393544: New connection
webhooks client 3042393544: Client info {'program': 'Moonraker', 'version': 'v0.7.1-660-g5d856b9'}
Loaded MCU 'mcu' 105 commands (v0.10.0-563-g354915d2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 15.0)    | (40.0, 40.0)
  1   | (107.5, 15.0)   | (107.5, 40.0)
  2   | (175.0, 15.0)   | (175.0, 40.0)
  3   | (242.5, 15.0)   | (242.5, 40.0)
  4   | (310.0, 15.0)   | (310.0, 40.0)
  5   | (310.0, 82.5)   | (310.0, 107.5)
  6   | (242.5, 82.5)   | (242.5, 107.5)
  7   | (175.0, 82.5)   | (175.0, 107.5)
  8   | (107.5, 82.5)   | (107.5, 107.5)
  9   | (40.0, 82.5)    | (40.0, 107.5)
  10  | (40.0, 150.0)   | (40.0, 175.0)
  11  | (107.5, 150.0)  | (107.5, 175.0)
  12  | (175.0, 150.0)  | (175.0, 175.0)
  13  | (242.5, 150.0)  | (242.5, 175.0)
  14  | (310.0, 150.0)  | (310.0, 175.0)
  15  | (310.0, 217.5)  | (310.0, 242.5)
  16  | (242.5, 217.5)  | (242.5, 242.5)
  17  | (175.0, 217.5)  | (175.0, 242.5)
  18  | (107.5, 217.5)  | (107.5, 242.5)
  19  | (40.0, 217.5)   | (40.0, 242.5)
  20  | (40.0, 285.0)   | (40.0, 310.0)
  21  | (107.5, 285.0)  | (107.5, 310.0)
  22  | (175.0, 285.0)  | (175.0, 310.0)
  23  | (242.5, 285.0)  | (242.5, 310.0)
  24  | (310.0, 285.0)  | (310.0, 310.0)
bed_mesh: relative_reference_index 12 is (175.00, 175.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Write g-code response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/gcode.py", line 446, in _respond_raw
    os.write(self.fd, (msg+"\n").encode())
OSError: [Errno 11] Resource temporarily unavailable
Stats 93444.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3389 bytes_read=6533 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3022 freq=179998914  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.15 cputime=0.000 memavail=3581164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 3042393544
webhooks: registering remote method 'reboot_machine' for connection id: 3042393544
webhooks: registering remote method 'pause_job_queue' for connection id: 3042393544
webhooks: registering remote method 'start_job_queue' for connection id: 3042393544
webhooks: registering remote method 'timelapse_newframe' for connection id: 3042393544
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 3042393544
webhooks: registering remote method 'timelapse_render' for connection id: 3042393544
Stats 93445.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6715 bytes_read=6944 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000368  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.15 cputime=0.079 memavail=3580308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93446.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=6910 bytes_read=7120 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000441  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.15 cputime=0.119 memavail=3580468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93447.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6916 bytes_read=7318 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001089  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.15 cputime=0.147 memavail=3580468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93448.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6922 bytes_read=7484 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000794  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.13 cputime=0.173 memavail=3580468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93449.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6928 bytes_read=7635 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001489  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.13 cputime=0.199 memavail=3580468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93450.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6934 bytes_read=7816 bytes_retransmit=9 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000945  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.13 cputime=0.225 memavail=3580468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93451.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=6940 bytes_read=7982 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000677  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.13 cputime=0.250 memavail=3580468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93452.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6946 bytes_read=8147 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000425  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.13 cputime=0.275 memavail=3580468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93453.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6952 bytes_read=8328 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000250  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.12 cputime=0.301 memavail=3579980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93454.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6958 bytes_read=8494 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000141  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.12 cputime=0.329 memavail=3579980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93455.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6964 bytes_read=8645 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000013  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.12 cputime=0.348 memavail=3578780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93456.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6970 bytes_read=8826 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999942  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.12 cputime=0.370 memavail=3578780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93457.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6976 bytes_read=9006 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999852  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.12 cputime=0.398 memavail=3578780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93458.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6982 bytes_read=9157 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999820  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.11 cputime=0.423 memavail=3578780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93459.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6988 bytes_read=9338 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999776  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.11 cputime=0.451 memavail=3578780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93460.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=6994 bytes_read=9504 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999743  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.11 cputime=0.476 memavail=3578780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93461.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7000 bytes_read=9655 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999696  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.11 cputime=0.503 memavail=3578780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93462.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7006 bytes_read=9850 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999677  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.11 cputime=0.529 memavail=3578780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93463.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7012 bytes_read=10016 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999654  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.10 cputime=0.555 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93464.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7018 bytes_read=10167 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999652  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.10 cputime=0.581 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93465.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7024 bytes_read=10342 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999644  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.10 cputime=0.607 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93466.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7030 bytes_read=10498 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999632  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.10 cputime=0.633 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93467.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7036 bytes_read=10662 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999628  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.10 cputime=0.660 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93468.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7042 bytes_read=10843 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999610  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.10 cputime=0.686 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93469.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7048 bytes_read=11009 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999599  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.10 cputime=0.714 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93470.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7054 bytes_read=11160 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999584  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.10 cputime=0.739 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93471.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7060 bytes_read=11341 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999566  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.10 cputime=0.766 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93472.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7066 bytes_read=11521 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999554  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.10 cputime=0.794 memavail=3579052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93473.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7072 bytes_read=11687 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999547  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.09 cputime=0.821 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93474.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7078 bytes_read=11853 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999548  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.09 cputime=0.849 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93475.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7084 bytes_read=12019 bytes_retransmit=9 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999549  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.09 cputime=0.876 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93476.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7096 bytes_read=12201 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999544  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.09 cputime=0.906 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93477.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7102 bytes_read=12381 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999545  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.09 cputime=0.933 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93478.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7108 bytes_read=12547 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999542  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.08 cputime=0.961 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93479.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7114 bytes_read=12713 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999541  heater_bed: target=0 temp=21.6 pwm=0.000 sysload=0.08 cputime=0.989 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93480.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7120 bytes_read=12879 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999540  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.08 cputime=1.017 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93481.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7126 bytes_read=13045 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999533  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.08 cputime=1.043 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93482.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7132 bytes_read=13225 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999527  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.08 cputime=1.072 memavail=3579568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93483.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7138 bytes_read=13391 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999522  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.07 cputime=1.100 memavail=3580596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93484.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7144 bytes_read=13557 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.07 cputime=1.127 memavail=3580596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93485.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7150 bytes_read=13723 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.07 cputime=1.157 memavail=3580596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93486.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7156 bytes_read=13889 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.07 cputime=1.182 memavail=3580600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93487.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7162 bytes_read=14069 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999506  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.07 cputime=1.212 memavail=3580600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93488.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7168 bytes_read=14235 bytes_retransmit=9 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999510  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.07 cputime=1.240 memavail=3580600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93489.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7174 bytes_read=14391 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999509  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.07 cputime=1.266 memavail=3580600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93490.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7180 bytes_read=14549 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.07 cputime=1.293 memavail=3580600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93491.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7186 bytes_read=14715 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.07 cputime=1.316 memavail=3580600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93492.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7192 bytes_read=14895 bytes_retransmit=9 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999513  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.07 cputime=1.343 memavail=3580600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93493.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7198 bytes_read=15061 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999512  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.06 cputime=1.368 memavail=3580868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93494.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7204 bytes_read=15227 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999514  heater_bed: target=0 temp=21.6 pwm=0.000 sysload=0.06 cputime=1.395 memavail=3580868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93495.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7210 bytes_read=15393 bytes_retransmit=9 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999507  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.06 cputime=1.421 memavail=3580872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93496.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7216 bytes_read=15559 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999501  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.06 cputime=1.448 memavail=3580872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 93497.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7222 bytes_read=15739 bytes_retransmit=9 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999497  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.06 cputime=1.475 memavail=3580872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93498.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7228 bytes_read=15905 bytes_retransmit=9 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999492  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.06 cputime=1.502 memavail=3580872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93499.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7234 bytes_read=16071 bytes_retransmit=9 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999488  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.06 cputime=1.528 memavail=3580872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 93500.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7240 bytes_read=16237 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999485  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.06 cputime=1.556 memavail=3580872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 93501.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7246 bytes_read=16403 bytes_retransmit=9 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=179999485  heater_bed: target=0 temp=21.7 pwm=0.000 sysload=0.06 cputime=1.583 memavail=3580872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000